* Re: [PATCH net-next] dt-bindings: mdio: Clarify binding document
From: David Miller @ 2017-04-26 18:46 UTC (permalink / raw)
To: f.fainelli-Re5JQEeQqe8AvxtiuMwx3w
Cc: netdev-u79uwXL29TY76Z2rM5mHXA, rogerq-l0cyMroinI0,
andrew-g2DYL2Zd6BY, tony-4v6yS6AI5VpBDgjK7y7TUQ,
nsekhar-l0cyMroinI0, jsarha-l0cyMroinI0,
linux-omap-u79uwXL29TY76Z2rM5mHXA, lars-Qo5EllUWu/uELgA04lAiVw,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <20170425183308.26107-1-f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
From: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date: Tue, 25 Apr 2017 11:33:03 -0700
> The described GPIO reset property is applicable to *all* child PHYs. If
> we have one reset line per PHY present on the MDIO bus, these
> automatically become properties of the child PHY nodes.
>
> Finally, indicate how the RESET pulse width must be defined, which is
> the maximum value of all individual PHYs RESET pulse widths determined
> by reading their datasheets.
>
> Fixes: 69226896ad63 ("mdio_bus: Issue GPIO RESET to PHYs.")
> Signed-off-by: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Applied, thanks Florian.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH 0/5] ARM: sunxi: Convert sun4i/sun7i series SoCs to sunxi-ng CCU
From: Priit Laes @ 2017-04-26 19:31 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA
Cc: Philipp Zabel, Russell King, Chen-Yu Tsai, Maxime Ripard,
Mark Rutland, Rob Herring, Stephen Boyd, Michael Turquette,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Priit Laes
Hi,
This serie brings A10 (sun4i) and A20 (sun7i) SoCs into the
sunxi-ng world.
As mentioned in sun5i conversion, this is pretty much standard
stuff as all the required clocks were already implemented in
the sunxi-ng framework.
TODO: Unfortunately there's still an issue with SATA clocks
which will fail unless u-boot has set up the clocks. Clocks
probably need some extra work to handle fixed postdivider
and multiple parents.
Changes from v2:
- Rename driver and relevant files to sun4i-a10-ccu.
- Drop mmc output and sample clocks for sun4i-a10.
- Rename CSI ISP clock to SCLK as it is called on other variants.
- Add comment on why PLL6 is used as AHB parent.
- Fix parents for out_a/out_b clocks.
- Stop exporting PLL_PERIPH_SATA gate. Driver takes care of gate.
- Rework SATA clock handling.
- Fix ahb gate parents.
- Simplefb clock fixes (add dependencies for HDMI/LVDS clocks).
- Fixes for pll-ve and pll-video1 clocks pointed out by Jonathan Liu.
- Adapt to latest upstream changes from sunxi-next.
Changes from v1:
- Drop useless comments
- Add support for A10 / sun4i.
- Rename driver to sunxi-a10-a20.
- Add previously unimplemented clocks.
- Document the audio pll hardcoded post-divider
- Add Acked-by: Rob Herring <robh at kernel.org> on patch 4
Priit Laes (5):
clk: sunxi-ng: Add sun4i/sun7i CCU driver
dt-bindings: List devicetree binding for the CCU of Allwinner A20
dt-bindings: List devicetree binding for the CCU of Allwinner A10
ARM: sun7i: Convert to CCU
ARM: sun4i: Convert to CCU
Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 2 +-
arch/arm/boot/dts/sun4i-a10.dtsi | 645 +----
arch/arm/boot/dts/sun7i-a20.dtsi | 720 +-----
drivers/clk/sunxi-ng/Kconfig | 14 +-
drivers/clk/sunxi-ng/Makefile | 1 +-
drivers/clk/sunxi-ng/ccu-sun4i-a10.c | 1443 ++++++++++-
drivers/clk/sunxi-ng/ccu-sun4i-a10.h | 60 +-
include/dt-bindings/clock/sun4i-a10-ccu.h | 207 +-
include/dt-bindings/reset/sun4i-a10-ccu.h | 67 +-
9 files changed, 1954 insertions(+), 1205 deletions(-)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.h
create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h
base-commit: 4c5e651abcb0fe1c7dd61d4ceb0388cc4a80485f
--
git-series 0.9.1
^ permalink raw reply
* [PATCH v3 0/5] ARM: sunxi: Convert sun4i/sun7i series SoCs to sunxi-ng CCU
From: Priit Laes @ 2017-04-26 19:32 UTC (permalink / raw)
To: linux-kernel, linux-arm-kernel, devicetree, linux-clk
Cc: Philipp Zabel, Russell King, Chen-Yu Tsai, Maxime Ripard,
Mark Rutland, Rob Herring, Stephen Boyd, Michael Turquette,
linux-sunxi, Priit Laes
Hi,
This serie brings A10 (sun4i) and A20 (sun7i) SoCs into the
sunxi-ng world.
As mentioned in sun5i conversion, this is pretty much standard
stuff as all the required clocks were already implemented in
the sunxi-ng framework.
TODO: Unfortunately there's still an issue with SATA clocks
which will fail unless u-boot has set up the clocks. Clocks
probably need some extra work to handle fixed postdivider
and multiple parents.
Changes from v2:
- Rename driver and relevant files to sun4i-a10-ccu.
- Drop mmc output and sample clocks for sun4i-a10.
- Rename CSI ISP clock to SCLK as it is called on other variants.
- Add comment on why PLL6 is used as AHB parent.
- Fix parents for out_a/out_b clocks.
- Stop exporting PLL_PERIPH_SATA gate. Driver takes care of gate.
- Rework SATA clock handling.
- Fix ahb gate parents.
- Simplefb clock fixes (add dependencies for HDMI/LVDS clocks).
- Fixes for pll-ve and pll-video1 clocks pointed out by Jonathan Liu.
- Adapt to latest upstream changes from sunxi-next.
Changes from v1:
- Drop useless comments
- Add support for A10 / sun4i.
- Rename driver to sunxi-a10-a20.
- Add previously unimplemented clocks.
- Document the audio pll hardcoded post-divider
- Add Acked-by: Rob Herring <robh at kernel.org> on patch 4
Priit Laes (5):
clk: sunxi-ng: Add sun4i/sun7i CCU driver
dt-bindings: List devicetree binding for the CCU of Allwinner A20
dt-bindings: List devicetree binding for the CCU of Allwinner A10
ARM: sun7i: Convert to CCU
ARM: sun4i: Convert to CCU
Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 2 +-
arch/arm/boot/dts/sun4i-a10.dtsi | 645 +----
arch/arm/boot/dts/sun7i-a20.dtsi | 720 +-----
drivers/clk/sunxi-ng/Kconfig | 14 +-
drivers/clk/sunxi-ng/Makefile | 1 +-
drivers/clk/sunxi-ng/ccu-sun4i-a10.c | 1443 ++++++++++-
drivers/clk/sunxi-ng/ccu-sun4i-a10.h | 60 +-
include/dt-bindings/clock/sun4i-a10-ccu.h | 207 +-
include/dt-bindings/reset/sun4i-a10-ccu.h | 67 +-
9 files changed, 1954 insertions(+), 1205 deletions(-)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.h
create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h
base-commit: 4c5e651abcb0fe1c7dd61d4ceb0388cc4a80485f
--
git-series 0.9.1
^ permalink raw reply
* [PATCH v3 1/5] clk: sunxi-ng: Add sun4i/sun7i CCU driver
From: Priit Laes @ 2017-04-26 19:32 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA
Cc: Philipp Zabel, Russell King, Chen-Yu Tsai, Maxime Ripard,
Mark Rutland, Rob Herring, Stephen Boyd, Michael Turquette,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Priit Laes
In-Reply-To: <cover.908ce010a25e503bb5ad0967759c723219c6ed0d.1493235134.git-series.plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
Introduce a clock controller driver for sun4i A10 and sun7i A20
series SoCs.
Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
--
Changes since v2:
- Rename driver to sun4i-a10
---
drivers/clk/sunxi-ng/Kconfig | 14 +-
drivers/clk/sunxi-ng/Makefile | 1 +-
drivers/clk/sunxi-ng/ccu-sun4i-a10.c | 1443 ++++++++++++++++++++++-
drivers/clk/sunxi-ng/ccu-sun4i-a10.h | 60 +-
include/dt-bindings/clock/sun4i-a10-ccu.h | 207 +++-
include/dt-bindings/reset/sun4i-a10-ccu.h | 67 +-
6 files changed, 1792 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.h
create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index fbd3f8c..1133749 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -66,6 +66,19 @@ config SUN50I_A64_CCU
default ARM64 && ARCH_SUNXI
depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+config SUNXI_A10_CCU
+ bool "Support for the Allwinner A10/A20 CCU"
+ select SUNXI_CCU_DIV
+ select SUNXI_CCU_MULT
+ select SUNXI_CCU_NK
+ select SUNXI_CCU_NKM
+ select SUNXI_CCU_NM
+ select SUNXI_CCU_MP
+ select SUNXI_CCU_PHASE
+ default MACH_SUN4I
+ default MACH_SUN7I
+ depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
+
config SUN5I_CCU
bool "Support for the Allwinner sun5i family CCM"
select SUNXI_CCU_DIV
@@ -157,4 +170,5 @@ config SUN8I_R_CCU
select SUNXI_CCU_GATE
default MACH_SUN8I || (ARCH_SUNXI && ARM64)
+
endif
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 0ec02fe..fbfe163 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_SUNXI_CCU_MP) += ccu_mp.o
obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o
obj-$(CONFIG_SUN5I_CCU) += ccu-sun5i.o
obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o
+obj-$(CONFIG_SUNXI_A10_CCU) += ccu-sun4i-a10.o
obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun4i-a10.c b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
new file mode 100644
index 0000000..3371c0a
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
@@ -0,0 +1,1443 @@
+/*
+ * Copyright (c) 2017 Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun4i-a10.h"
+
+static struct ccu_nkmp pll_core_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .m = _SUNXI_CCU_DIV(0, 2),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .common = {
+ .reg = 0x000,
+ .hw.init = CLK_HW_INIT("pll-core",
+ "hosc",
+ &ccu_nkmp_ops,
+ 0),
+ },
+};
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names.
+ */
+#define SUN4I_PLL_AUDIO_REG 0x008
+static struct ccu_nm pll_audio_base_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 7, 0),
+ .m = _SUNXI_CCU_DIV_OFFSET(0, 5, 0),
+ .common = {
+ .reg = 0x008,
+ .hw.init = CLK_HW_INIT("pll-audio-base",
+ "hosc",
+ &ccu_nm_ops,
+ 0),
+ },
+
+};
+
+static struct ccu_mult pll_video0_clk = {
+ .enable = BIT(31),
+ .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+ .frac = _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+ 270000000, 297000000),
+ .common = {
+ .reg = 0x010,
+ .features = (CCU_FEATURE_FRACTIONAL |
+ CCU_FEATURE_ALL_PREDIV),
+ .prediv = 8,
+ .hw.init = CLK_HW_INIT("pll-video0",
+ "hosc",
+ &ccu_mult_ops,
+ 0),
+ },
+};
+
+static struct ccu_nkmp pll_ve_sun4i_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .m = _SUNXI_CCU_DIV(0, 2),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .common = {
+ .reg = 0x018,
+ .hw.init = CLK_HW_INIT("pll-ve",
+ "hosc",
+ &ccu_nkmp_ops,
+ 0),
+ },
+};
+
+static struct ccu_nk pll_ve_sun7i_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .common = {
+ .reg = 0x018,
+ .hw.init = CLK_HW_INIT("pll-ve",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static struct ccu_nk pll_ddr_base_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .common = {
+ .reg = 0x020,
+ .hw.init = CLK_HW_INIT("pll-ddr-base",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_M(pll_ddr_clk, "pll-ddr", "pll-ddr-base", 0x020, 0, 2,
+ CLK_IS_CRITICAL);
+
+static struct ccu_div pll_ddr_other_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(16, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .common = {
+ .reg = 0x020,
+ .hw.init = CLK_HW_INIT("pll-ddr-other", "pll-ddr-base",
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct ccu_nk pll_periph_base_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .common = {
+ .reg = 0x028,
+ .hw.init = CLK_HW_INIT("pll-periph-base",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static CLK_FIXED_FACTOR(pll_periph_clk, "pll-periph", "pll-periph-base",
+ 2, 1, CLK_SET_RATE_PARENT);
+
+/* Not documented on A10 */
+/* TODO: current implementation is missing fixed postdivider 6 */
+static struct ccu_div pll_periph_sata_clk = {
+ .enable = BIT(14),
+ .div = _SUNXI_CCU_DIV(0, 2),
+ .common = {
+ .reg = 0x028,
+ .hw.init = CLK_HW_INIT("pll-periph-sata",
+ "pll-periph-base",
+ &ccu_nk_ops, 0),
+ },
+};
+
+static struct ccu_mult pll_video1_clk = {
+ .enable = BIT(31),
+ .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+ .frac = _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+ 270000000, 297000000),
+ .common = {
+ .reg = 0x030,
+ .features = (CCU_FEATURE_FRACTIONAL |
+ CCU_FEATURE_ALL_PREDIV),
+ .prediv = 8,
+ .hw.init = CLK_HW_INIT("pll-video1",
+ "hosc",
+ &ccu_mult_ops,
+ 0),
+ },
+};
+
+/* Not present on A10 */
+static struct ccu_nk pll_gpu_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .common = {
+ .reg = 0x040,
+ .hw.init = CLK_HW_INIT("pll-gpu",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE(hosc_clk, "hosc", "osc24M", 0x050, BIT(0), 0);
+
+static const char *const cpu_parents[] = { "osc32k", "hosc",
+ "pll-core", "pll-periph" };
+static const struct ccu_mux_fixed_prediv cpu_predivs[] = {
+ { .index = 3, .div = 3, },
+};
+
+#define SUN4I_AHB_REG 0x054
+static struct ccu_mux cpu_clk = {
+ .mux = {
+ .shift = 16,
+ .width = 2,
+ .fixed_predivs = cpu_predivs,
+ .n_predivs = ARRAY_SIZE(cpu_predivs),
+ },
+ .common = {
+ .reg = 0x054,
+ .features = CCU_FEATURE_FIXED_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("cpu",
+ cpu_parents,
+ &ccu_mux_ops,
+ CLK_IS_CRITICAL),
+ }
+};
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x054, 0, 2, 0);
+
+static struct ccu_div ahb_sun4i_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .common = {
+ .reg = 0x054,
+ .hw.init = CLK_HW_INIT("ahb", "axi", &ccu_div_ops, 0),
+ },
+};
+
+static const char *const ahb_sun7i_parents[] = { "axi", "pll-periph",
+ "pll-periph" };
+static const struct ccu_mux_fixed_prediv ahb_sun7i_predivs[] = {
+ { .index = 1, .div = 2, },
+ { /* Sentinel */ },
+};
+static struct ccu_div ahb_sun7i_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = {
+ .shift = 6,
+ .width = 2,
+ .fixed_predivs = ahb_sun7i_predivs,
+ .n_predivs = ARRAY_SIZE(ahb_sun7i_predivs),
+ },
+
+ .common = {
+ .reg = 0x054,
+ .hw.init = CLK_HW_INIT_PARENTS("ahb",
+ ahb_sun7i_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct clk_div_table apb0_div_table[] = {
+ { .val = 0, .div = 2 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 8 },
+ { /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb0_clk, "apb0", "ahb",
+ 0x054, 8, 2, apb0_div_table, 0);
+
+static const char *const apb1_parents[] = { "hosc", "pll-periph", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", apb1_parents, 0x058,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+/* Not present on A20 */
+static SUNXI_CCU_GATE(axi_dram_clk, "axi-dram", "ahb",
+ 0x05c, BIT(31), 0);
+
+static SUNXI_CCU_GATE(ahb_otg_clk, "ahb-otg", "ahb",
+ 0x060, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_ehci0_clk, "ahb-ehci0", "ahb",
+ 0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(ahb_ohci0_clk, "ahb-ohci0", "ahb",
+ 0x060, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_ehci1_clk, "ahb-ehci1", "ahb",
+ 0x060, BIT(3), 0);
+static SUNXI_CCU_GATE(ahb_ohci1_clk, "ahb-ohci1", "ahb",
+ 0x060, BIT(4), 0);
+static SUNXI_CCU_GATE(ahb_ss_clk, "ahb-ss", "ahb",
+ 0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(ahb_dma_clk, "ahb-dma", "ahb",
+ 0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(ahb_bist_clk, "ahb-bist", "ahb",
+ 0x060, BIT(7), 0);
+static SUNXI_CCU_GATE(ahb_mmc0_clk, "ahb-mmc0", "ahb",
+ 0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_mmc1_clk, "ahb-mmc1", "ahb",
+ 0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(ahb_mmc2_clk, "ahb-mmc2", "ahb",
+ 0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(ahb_mmc3_clk, "ahb-mmc3", "ahb",
+ 0x060, BIT(11), 0);
+static SUNXI_CCU_GATE(ahb_ms_clk, "ahb-ms", "ahb",
+ 0x060, BIT(12), 0);
+static SUNXI_CCU_GATE(ahb_nand_clk, "ahb-nand", "ahb",
+ 0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(ahb_sdram_clk, "ahb-sdram", "ahb",
+ 0x060, BIT(14), CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(ahb_ace_clk, "ahb-ace", "ahb",
+ 0x060, BIT(16), 0);
+static SUNXI_CCU_GATE(ahb_emac_clk, "ahb-emac", "ahb",
+ 0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(ahb_ts_clk, "ahb-ts", "ahb",
+ 0x060, BIT(18), 0);
+static SUNXI_CCU_GATE(ahb_spi0_clk, "ahb-spi0", "ahb",
+ 0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(ahb_spi1_clk, "ahb-spi1", "ahb",
+ 0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(ahb_spi2_clk, "ahb-spi2", "ahb",
+ 0x060, BIT(22), 0);
+static SUNXI_CCU_GATE(ahb_spi3_clk, "ahb-spi3", "ahb",
+ 0x060, BIT(23), 0);
+static SUNXI_CCU_GATE(ahb_pata_clk, "ahb-pata", "ahb",
+ 0x060, BIT(24), 0);
+/* Not documented on A20 */
+static SUNXI_CCU_GATE(ahb_sata_clk, "ahb-sata", "ahb",
+ 0x060, BIT(25), 0);
+/* Not present on A20 */
+static SUNXI_CCU_GATE(ahb_gps_clk, "ahb-gps", "ahb",
+ 0x060, BIT(26), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_hstimer_clk, "ahb-hstimer", "ahb",
+ 0x060, BIT(28), 0);
+
+static SUNXI_CCU_GATE(ahb_ve_clk, "ahb-ve", "ahb",
+ 0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_tvd_clk, "ahb-tvd", "ahb",
+ 0x064, BIT(1), 0);
+static SUNXI_CCU_GATE(ahb_tve0_clk, "ahb-tve0", "ahb",
+ 0x064, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_tve1_clk, "ahb-tve1", "ahb",
+ 0x064, BIT(3), 0);
+static SUNXI_CCU_GATE(ahb_lcd0_clk, "ahb-lcd0", "ahb",
+ 0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(ahb_lcd1_clk, "ahb-lcd1", "ahb",
+ 0x064, BIT(5), 0);
+static SUNXI_CCU_GATE(ahb_csi0_clk, "ahb-csi0", "ahb",
+ 0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_csi1_clk, "ahb-csi1", "ahb",
+ 0x064, BIT(9), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_hdmi1_clk, "ahb-hdmi1", "ahb",
+ 0x064, BIT(10), 0);
+static SUNXI_CCU_GATE(ahb_hdmi0_clk, "ahb-hdmi0", "ahb",
+ 0x064, BIT(11), 0);
+static SUNXI_CCU_GATE(ahb_de_be0_clk, "ahb-de-be0", "ahb",
+ 0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(ahb_de_be1_clk, "ahb-de-be1", "ahb",
+ 0x064, BIT(13), 0);
+static SUNXI_CCU_GATE(ahb_de_fe0_clk, "ahb-de-fe0", "ahb",
+ 0x064, BIT(14), 0);
+static SUNXI_CCU_GATE(ahb_de_fe1_clk, "ahb-de-fe1", "ahb",
+ 0x064, BIT(15), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_gmac_clk, "ahb-gmac", "ahb",
+ 0x064, BIT(17), 0);
+static SUNXI_CCU_GATE(ahb_mp_clk, "ahb-mp", "ahb",
+ 0x064, BIT(18), 0);
+static SUNXI_CCU_GATE(ahb_gpu_clk, "ahb-gpu", "ahb",
+ 0x064, BIT(20), 0);
+
+static SUNXI_CCU_GATE(apb0_codec_clk, "apb0-codec", "apb0",
+ 0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(apb0_spdif_clk, "apb0-spdif", "apb0",
+ 0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(apb0_ac97_clk, "apb0-ac97", "apb0",
+ 0x068, BIT(2), 0);
+static SUNXI_CCU_GATE(apb0_i2s0_clk, "apb0-i2s0", "apb0",
+ 0x068, BIT(3), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb0_i2s1_clk, "apb0-i2s1", "apb0",
+ 0x068, BIT(4), 0);
+static SUNXI_CCU_GATE(apb0_pio_clk, "apb0-pio", "apb0",
+ 0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(apb0_ir0_clk, "apb0-ir0", "apb0",
+ 0x068, BIT(6), 0);
+static SUNXI_CCU_GATE(apb0_ir1_clk, "apb0-ir1", "apb0",
+ 0x068, BIT(7), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb0_i2s2_clk, "apb0-i2s2", "apb0",
+ 0x068, BIT(8), 0);
+static SUNXI_CCU_GATE(apb0_keypad_clk, "apb0-keypad", "apb0",
+ 0x068, BIT(10), 0);
+
+static SUNXI_CCU_GATE(apb1_i2c0_clk, "apb1-i2c0", "apb1",
+ 0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(apb1_i2c1_clk, "apb1-i2c1", "apb1",
+ 0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(apb1_i2c2_clk, "apb1-i2c2", "apb1",
+ 0x06c, BIT(2), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb1_i2c3_clk, "apb1-i2c3", "apb1",
+ 0x06c, BIT(3), 0);
+static SUNXI_CCU_GATE(apb1_can_clk, "apb1-can", "apb1",
+ 0x06c, BIT(4), 0);
+static SUNXI_CCU_GATE(apb1_scr_clk, "apb1-scr", "apb1",
+ 0x06c, BIT(5), 0);
+static SUNXI_CCU_GATE(apb1_ps20_clk, "apb1-ps20", "apb1",
+ 0x06c, BIT(6), 0);
+static SUNXI_CCU_GATE(apb1_ps21_clk, "apb1-ps21", "apb1",
+ 0x06c, BIT(7), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb1_i2c4_clk, "apb1-i2c4", "apb1",
+ 0x06c, BIT(15), 0);
+static SUNXI_CCU_GATE(apb1_uart0_clk, "apb1-uart0", "apb1",
+ 0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(apb1_uart1_clk, "apb1-uart1", "apb1",
+ 0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(apb1_uart2_clk, "apb1-uart2", "apb1",
+ 0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(apb1_uart3_clk, "apb1-uart3", "apb1",
+ 0x06c, BIT(19), 0);
+static SUNXI_CCU_GATE(apb1_uart4_clk, "apb1-uart4", "apb1",
+ 0x06c, BIT(20), 0);
+static SUNXI_CCU_GATE(apb1_uart5_clk, "apb1-uart5", "apb1",
+ 0x06c, BIT(21), 0);
+static SUNXI_CCU_GATE(apb1_uart6_clk, "apb1-uart6", "apb1",
+ 0x06c, BIT(22), 0);
+static SUNXI_CCU_GATE(apb1_uart7_clk, "apb1-uart7", "apb1",
+ 0x06c, BIT(23), 0);
+
+static const char *const mod0_default_parents[] = { "hosc", "pll-periph",
+ "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(ms_clk, "ms", mod0_default_parents, 0x084,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
+ 0x088, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
+ 0x088, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
+ 0x08c, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
+ 0x08c, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2_output", "mmc2",
+ 0x090, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2_sample", "mmc2",
+ 0x090, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc3_clk, "mmc3", mod0_default_parents, 0x094,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc3_output_clk, "mmc3_output", "mmc3",
+ 0x094, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc3_sample_clk, "mmc3_sample", "mmc3",
+ 0x094, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", mod0_default_parents, 0x098,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ss_clk, "ss", mod0_default_parents, 0x09c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents, 0x0a8,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(pata_clk, "pata", mod0_default_parents, 0x0ac,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* TODO: Check whether A10 actually supports osc32k as 4th parent? */
+static const char *const ir_parents_sun4i[] = { "hosc", "pll-periph",
+ "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_sun4i_clk, "ir0", ir_parents_sun4i, 0x0b0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_sun4i_clk, "ir1", ir_parents_sun4i, 0x0b4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+static const char *const ir_parents_sun7i[] = { "hosc", "pll-periph",
+ "pll-ddr-other", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_sun7i_clk, "ir0", ir_parents_sun7i, 0x0b0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_sun7i_clk, "ir1", ir_parents_sun7i, 0x0b4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char *const audio_parents[] = { "pll-audio-8x", "pll-audio-4x",
+ "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", audio_parents,
+ 0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(ac97_clk, "ac97", audio_parents,
+ 0x0bc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", audio_parents,
+ 0x0c0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char *const keypad_parents[] = { "hosc", "losc"};
+static const u8 keypad_table[] = { 0, 2 };
+static struct ccu_mp keypad_clk = {
+ .enable = BIT(31),
+ .m = _SUNXI_CCU_DIV(0, 5),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .mux = _SUNXI_CCU_MUX_TABLE(24, 2, keypad_table),
+ .common = {
+ .reg = 0x0c4,
+ .hw.init = CLK_HW_INIT_PARENTS("keypad",
+ keypad_parents,
+ &ccu_mp_ops,
+ 0),
+ },
+};
+
+/*
+ * SATA supports external clock as parent via BIT(24) and is probably an
+ * optional crystal or oscillator that can be connected to the
+ * SATA-CLKM / SATA-CLKP pins.
+ */
+static const char *const sata_parents[] = {"pll-periph-sata", "sata-ext"};
+static SUNXI_CCU_MUX_WITH_GATE(sata_clk, "sata", sata_parents,
+ 0x0c8, 24, 1, BIT(31), 0);
+
+
+static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "pll-periph",
+ 0x0cc, BIT(6), 0);
+static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "pll-periph",
+ 0x0cc, BIT(7), 0);
+static SUNXI_CCU_GATE(usb_phy_clk, "usb-phy", "pll-periph",
+ 0x0cc, BIT(8), 0);
+
+/* TODO: GPS CLK 0x0d0 */
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi3_clk, "spi3", mod0_default_parents, 0x0d4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* Not present on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", audio_parents,
+ 0x0d8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+/* Not present on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", audio_parents,
+ 0x0dc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "pll-ddr",
+ 0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi0_clk, "dram-csi0", "pll-ddr",
+ 0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_csi1_clk, "dram-csi1", "pll-ddr",
+ 0x100, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "pll-ddr",
+ 0x100, BIT(3), 0);
+static SUNXI_CCU_GATE(dram_tvd_clk, "dram-tvd", "pll-ddr",
+ 0x100, BIT(4), 0);
+static SUNXI_CCU_GATE(dram_tve0_clk, "dram-tve0", "pll-ddr",
+ 0x100, BIT(5), 0);
+static SUNXI_CCU_GATE(dram_tve1_clk, "dram-tve1", "pll-ddr",
+ 0x100, BIT(6), 0);
+
+/* Clock seems to be critical only on sun4i */
+static SUNXI_CCU_GATE(dram_out_clk, "dram-out", "pll-ddr",
+ 0x100, BIT(15), CLK_IS_CRITICAL);
+static SUNXI_CCU_GATE(dram_de_fe1_clk, "dram-de-fe1", "pll-ddr",
+ 0x100, BIT(24), 0);
+static SUNXI_CCU_GATE(dram_de_fe0_clk, "dram-de-fe0", "pll-ddr",
+ 0x100, BIT(25), 0);
+static SUNXI_CCU_GATE(dram_de_be0_clk, "dram-de-be0", "pll-ddr",
+ 0x100, BIT(26), 0);
+static SUNXI_CCU_GATE(dram_de_be1_clk, "dram-de-be1", "pll-ddr",
+ 0x100, BIT(27), 0);
+static SUNXI_CCU_GATE(dram_mp_clk, "dram-mp", "pll-ddr",
+ 0x100, BIT(28), 0);
+static SUNXI_CCU_GATE(dram_ace_clk, "dram-ace", "pll-ddr",
+ 0x100, BIT(29), 0);
+
+static const char *const de_parents[] = { "pll-video0", "pll-video1",
+ "pll-ddr-other" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_be0_clk, "de-be0", de_parents,
+ 0x104, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_be1_clk, "de-be1", de_parents,
+ 0x108, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_fe0_clk, "de-fe0", de_parents,
+ 0x10c, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_fe1_clk, "de-fe1", de_parents,
+ 0x110, 0, 4, 24, 2, BIT(31), 0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_M_WITH_MUX_GATE(de_mp_clk, "de-mp", de_parents,
+ 0x114, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const tcon_parents[] = { "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon0_ch0_clk, "tcon0-ch0-sclk", tcon_parents,
+ 0x118, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_MUX_WITH_GATE(tcon1_ch0_clk, "tcon1-ch0-sclk", tcon_parents,
+ 0x11c, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char *const csi_sclk_parents[] = { "pll-video0", "pll-ve",
+ "pll-ddr-other", "pll-periph" };
+
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk",
+ csi_sclk_parents,
+ 0x120, 0, 4, 24, 2, BIT(31), 0);
+
+/* TVD clock setup for A10 */
+static const char *const tvd_parents[] = { "pll-video0", "pll-video1" };
+static SUNXI_CCU_MUX_WITH_GATE(tvd_sun4i_clk, "tvd", tvd_parents,
+ 0x128, 24, 1, BIT(31), 0);
+
+/* TVD clock setup for A20 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(tvd_sclk2_sun7i_clk,
+ "tvd-sclk2", tvd_parents,
+ 0x128,
+ 0, 4, /* M */
+ 16, 4, /* P */
+ 8, 1, /* mux */
+ BIT(15), /* gate */
+ 0);
+static SUNXI_CCU_M_WITH_GATE(tvd_sclk1_sun7i_clk, "tvd-sclk1", "tvd-sclk2",
+ 0x128, 0, 4, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon0_ch1_sclk2_clk, "tcon0-ch1-sclk2",
+ tcon_parents,
+ 0x12c, 0, 4, 24, 2, BIT(31),
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(tcon0_ch1_clk,
+ "tcon0-ch1-sclk1", "tcon0-ch1-sclk2",
+ 0x12c, 11, 1, BIT(15),
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon1_ch1_sclk2_clk, "tcon1-ch1-sclk2",
+ tcon_parents,
+ 0x130, 0, 4, 24, 2, BIT(31),
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(tcon1_ch1_clk,
+ "tcon1-ch1-sclk1", "tcon1-ch1-sclk2",
+ 0x130, 11, 1, BIT(15),
+ CLK_SET_RATE_PARENT);
+
+static const char *const csi_parents[] = { "hosc", "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x"};
+static const u8 csi_table[] = { 0, 1, 2, 5, 6};
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi0_clk, "csi0",
+ csi_parents, csi_table,
+ 0x134, 0, 5, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi1_clk, "csi1",
+ csi_parents, csi_table,
+ 0x138, 0, 5, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve", 0x13c, 16, 8, BIT(31), 0);
+
+static SUNXI_CCU_GATE(codec_clk, "codec", "pll-audio",
+ 0x140, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(avs_clk, "avs", "hosc", 0x144, BIT(31), 0);
+
+static const char *const ace_parents[] = { "pll-ve", "pll-ddr-other" };
+static SUNXI_CCU_M_WITH_MUX_GATE(ace_clk, "ace", ace_parents,
+ 0x148, 0, 4, 24, 1, BIT(31), 0);
+
+static const char *const hdmi_parents[] = { "pll-video0", "pll-video0-2x",
+ "pll-video1", "pll-video1-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
+ 0x150, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const gpu_parents_sun4i[] = { "pll-video0", "pll-ve",
+ "pll-ddr-other",
+ "pll-video1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(gpu_sun4i_clk, "gpu", gpu_parents_sun4i,
+ 0x154, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const gpu_parents_sun7i[] = { "pll-video0", "pll-ve",
+ "pll-ddr-other", "pll-video1",
+ "pll-gpu" };
+static const u8 gpu_table_sun7i[] = { 0, 1, 2, 3, 4 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(gpu_sun7i_clk, "gpu",
+ gpu_parents_sun7i, gpu_table_sun7i,
+ 0x154, 0, 4, 24, 3, BIT(31), 0);
+
+static const char *const mbus_sun4i_parents[] = { "hosc", "pll-periph",
+ "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_sun4i_clk, "mbus", mbus_sun4i_parents,
+ 0x15c, 0, 4, 16, 2, 24, 2, BIT(31),
+ 0);
+static const char *const mbus_sun7i_parents[] = { "hosc", "pll-periph-base",
+ "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_sun7i_clk, "mbus", mbus_sun7i_parents,
+ 0x15c, 0, 4, 16, 2, 24, 2, BIT(31),
+ CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(hdmi1_slow_clk, "hdmi1-slow", "hosc", 0x178, BIT(31), 0);
+
+static const char *const hdmi1_parents[] = { "pll-video0", "pll-video1" };
+static const u8 hdmi1_table[] = { 0, 1};
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(hdmi1_clk, "hdmi1",
+ hdmi1_parents, hdmi1_table,
+ 0x17c, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const out_parents[] = { "hosc", "osc32k", "hosc" };
+static const struct ccu_mux_fixed_prediv clk_out_predivs[] = {
+ { .index = 0, .div = 750, },
+};
+
+static struct ccu_mp out_a_clk = {
+ .enable = BIT(31),
+ .m = _SUNXI_CCU_DIV(8, 5),
+ .p = _SUNXI_CCU_DIV(20, 2),
+ .mux = {
+ .shift = 24,
+ .width = 2,
+ .fixed_predivs = clk_out_predivs,
+ .n_predivs = ARRAY_SIZE(clk_out_predivs),
+ },
+ .common = {
+ .reg = 0x1f0,
+ .features = CCU_FEATURE_FIXED_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("out-a",
+ out_parents,
+ &ccu_mp_ops,
+ 0),
+ },
+};
+static struct ccu_mp out_b_clk = {
+ .enable = BIT(31),
+ .m = _SUNXI_CCU_DIV(8, 5),
+ .p = _SUNXI_CCU_DIV(20, 2),
+ .mux = {
+ .shift = 24,
+ .width = 2,
+ .fixed_predivs = clk_out_predivs,
+ .n_predivs = ARRAY_SIZE(clk_out_predivs),
+ },
+ .common = {
+ .reg = 0x1f4,
+ .features = CCU_FEATURE_FIXED_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("out-b",
+ out_parents,
+ &ccu_mp_ops,
+ 0),
+ },
+};
+
+static struct ccu_common *sun4i_sun7i_ccu_clks[] = {
+ &hosc_clk.common,
+ &pll_core_clk.common,
+ &pll_audio_base_clk.common,
+ &pll_video0_clk.common,
+ &pll_ve_sun4i_clk.common,
+ &pll_ve_sun7i_clk.common,
+ &pll_ddr_base_clk.common,
+ &pll_ddr_clk.common,
+ &pll_ddr_other_clk.common,
+ &pll_periph_base_clk.common,
+ &pll_periph_sata_clk.common,
+ &pll_video1_clk.common,
+ &pll_gpu_clk.common,
+ &cpu_clk.common,
+ &axi_clk.common,
+ &axi_dram_clk.common,
+ &ahb_sun4i_clk.common,
+ &ahb_sun7i_clk.common,
+ &apb0_clk.common,
+ &apb1_clk.common,
+ &ahb_otg_clk.common,
+ &ahb_ehci0_clk.common,
+ &ahb_ohci0_clk.common,
+ &ahb_ehci1_clk.common,
+ &ahb_ohci1_clk.common,
+ &ahb_ss_clk.common,
+ &ahb_dma_clk.common,
+ &ahb_bist_clk.common,
+ &ahb_mmc0_clk.common,
+ &ahb_mmc1_clk.common,
+ &ahb_mmc2_clk.common,
+ &ahb_mmc3_clk.common,
+ &ahb_ms_clk.common,
+ &ahb_nand_clk.common,
+ &ahb_sdram_clk.common,
+ &ahb_ace_clk.common,
+ &ahb_emac_clk.common,
+ &ahb_ts_clk.common,
+ &ahb_spi0_clk.common,
+ &ahb_spi1_clk.common,
+ &ahb_spi2_clk.common,
+ &ahb_spi3_clk.common,
+ &ahb_pata_clk.common,
+ &ahb_sata_clk.common,
+ &ahb_gps_clk.common,
+ &ahb_hstimer_clk.common,
+ &ahb_ve_clk.common,
+ &ahb_tvd_clk.common,
+ &ahb_tve0_clk.common,
+ &ahb_tve1_clk.common,
+ &ahb_lcd0_clk.common,
+ &ahb_lcd1_clk.common,
+ &ahb_csi0_clk.common,
+ &ahb_csi1_clk.common,
+ &ahb_hdmi1_clk.common,
+ &ahb_hdmi0_clk.common,
+ &ahb_de_be0_clk.common,
+ &ahb_de_be1_clk.common,
+ &ahb_de_fe0_clk.common,
+ &ahb_de_fe1_clk.common,
+ &ahb_gmac_clk.common,
+ &ahb_mp_clk.common,
+ &ahb_gpu_clk.common,
+ &apb0_codec_clk.common,
+ &apb0_spdif_clk.common,
+ &apb0_ac97_clk.common,
+ &apb0_i2s0_clk.common,
+ &apb0_i2s1_clk.common,
+ &apb0_pio_clk.common,
+ &apb0_ir0_clk.common,
+ &apb0_ir1_clk.common,
+ &apb0_i2s2_clk.common,
+ &apb0_keypad_clk.common,
+ &apb1_i2c0_clk.common,
+ &apb1_i2c1_clk.common,
+ &apb1_i2c2_clk.common,
+ &apb1_i2c3_clk.common,
+ &apb1_can_clk.common,
+ &apb1_scr_clk.common,
+ &apb1_ps20_clk.common,
+ &apb1_ps21_clk.common,
+ &apb1_i2c4_clk.common,
+ &apb1_uart0_clk.common,
+ &apb1_uart1_clk.common,
+ &apb1_uart2_clk.common,
+ &apb1_uart3_clk.common,
+ &apb1_uart4_clk.common,
+ &apb1_uart5_clk.common,
+ &apb1_uart6_clk.common,
+ &apb1_uart7_clk.common,
+ &nand_clk.common,
+ &ms_clk.common,
+ &mmc0_clk.common,
+ &mmc0_output_clk.common,
+ &mmc0_sample_clk.common,
+ &mmc1_clk.common,
+ &mmc1_output_clk.common,
+ &mmc1_sample_clk.common,
+ &mmc2_clk.common,
+ &mmc2_output_clk.common,
+ &mmc2_sample_clk.common,
+ &mmc3_clk.common,
+ &mmc3_output_clk.common,
+ &mmc3_sample_clk.common,
+ &ts_clk.common,
+ &ss_clk.common,
+ &spi0_clk.common,
+ &spi1_clk.common,
+ &spi2_clk.common,
+ &pata_clk.common,
+ &ir0_sun4i_clk.common,
+ &ir1_sun4i_clk.common,
+ &ir0_sun7i_clk.common,
+ &ir1_sun7i_clk.common,
+ &i2s0_clk.common,
+ &ac97_clk.common,
+ &spdif_clk.common,
+ &keypad_clk.common,
+ &sata_clk.common,
+ &usb_ohci0_clk.common,
+ &usb_ohci1_clk.common,
+ &usb_phy_clk.common,
+ &spi3_clk.common,
+ &i2s1_clk.common,
+ &i2s2_clk.common,
+ &dram_ve_clk.common,
+ &dram_csi0_clk.common,
+ &dram_csi1_clk.common,
+ &dram_ts_clk.common,
+ &dram_tvd_clk.common,
+ &dram_tve0_clk.common,
+ &dram_tve1_clk.common,
+ &dram_out_clk.common,
+ &dram_de_fe1_clk.common,
+ &dram_de_fe0_clk.common,
+ &dram_de_be0_clk.common,
+ &dram_de_be1_clk.common,
+ &dram_mp_clk.common,
+ &dram_ace_clk.common,
+ &de_be0_clk.common,
+ &de_be1_clk.common,
+ &de_fe0_clk.common,
+ &de_fe1_clk.common,
+ &de_mp_clk.common,
+ &tcon0_ch0_clk.common,
+ &tcon1_ch0_clk.common,
+ &csi_sclk_clk.common,
+ &tvd_sun4i_clk.common,
+ &tvd_sclk1_sun7i_clk.common,
+ &tvd_sclk2_sun7i_clk.common,
+ &tcon0_ch1_sclk2_clk.common,
+ &tcon0_ch1_clk.common,
+ &tcon1_ch1_sclk2_clk.common,
+ &tcon1_ch1_clk.common,
+ &csi0_clk.common,
+ &csi1_clk.common,
+ &ve_clk.common,
+ &codec_clk.common,
+ &avs_clk.common,
+ &ace_clk.common,
+ &hdmi_clk.common,
+ &gpu_sun4i_clk.common,
+ &gpu_sun7i_clk.common,
+ &mbus_sun4i_clk.common,
+ &mbus_sun7i_clk.common,
+ &hdmi1_slow_clk.common,
+ &hdmi1_clk.common,
+ &out_a_clk.common,
+ &out_b_clk.common
+};
+
+/* Post-divider for pll-audio is hardcoded to 4 */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+ "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+ "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+ "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+ "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
+ "pll-video0", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video1_2x_clk, "pll-video1-2x",
+ "pll-video1", 1, 2, CLK_SET_RATE_PARENT);
+
+
+static struct clk_hw_onecell_data sun4i_a10_hw_clks = {
+ .hws = {
+ [CLK_HOSC] = &hosc_clk.common.hw,
+ [CLK_PLL_CORE] = &pll_core_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
+ [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
+ [CLK_PLL_VE] = &pll_ve_sun4i_clk.common.hw,
+ [CLK_PLL_DDR_BASE] = &pll_ddr_base_clk.common.hw,
+ [CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
+ [CLK_PLL_DDR_OTHER] = &pll_ddr_other_clk.common.hw,
+ [CLK_PLL_PERIPH_BASE] = &pll_periph_base_clk.common.hw,
+ [CLK_PLL_PERIPH] = &pll_periph_clk.hw,
+ [CLK_PLL_PERIPH_SATA] = &pll_periph_sata_clk.common.hw,
+ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
+ [CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
+ [CLK_CPU] = &cpu_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AXI_DRAM] = &axi_dram_clk.common.hw,
+ [CLK_AHB] = &ahb_sun4i_clk.common.hw,
+ [CLK_APB0] = &apb0_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_AHB_OTG] = &ahb_otg_clk.common.hw,
+ [CLK_AHB_EHCI0] = &ahb_ehci0_clk.common.hw,
+ [CLK_AHB_OHCI0] = &ahb_ohci0_clk.common.hw,
+ [CLK_AHB_EHCI1] = &ahb_ehci1_clk.common.hw,
+ [CLK_AHB_OHCI1] = &ahb_ohci1_clk.common.hw,
+ [CLK_AHB_SS] = &ahb_ss_clk.common.hw,
+ [CLK_AHB_DMA] = &ahb_dma_clk.common.hw,
+ [CLK_AHB_BIST] = &ahb_bist_clk.common.hw,
+ [CLK_AHB_MMC0] = &ahb_mmc0_clk.common.hw,
+ [CLK_AHB_MMC1] = &ahb_mmc1_clk.common.hw,
+ [CLK_AHB_MMC2] = &ahb_mmc2_clk.common.hw,
+ [CLK_AHB_MMC3] = &ahb_mmc3_clk.common.hw,
+ [CLK_AHB_MS] = &ahb_ms_clk.common.hw,
+ [CLK_AHB_NAND] = &ahb_nand_clk.common.hw,
+ [CLK_AHB_SDRAM] = &ahb_sdram_clk.common.hw,
+ [CLK_AHB_ACE] = &ahb_ace_clk.common.hw,
+ [CLK_AHB_EMAC] = &ahb_emac_clk.common.hw,
+ [CLK_AHB_TS] = &ahb_ts_clk.common.hw,
+ [CLK_AHB_SPI0] = &ahb_spi0_clk.common.hw,
+ [CLK_AHB_SPI1] = &ahb_spi1_clk.common.hw,
+ [CLK_AHB_SPI2] = &ahb_spi2_clk.common.hw,
+ [CLK_AHB_SPI3] = &ahb_spi3_clk.common.hw,
+ [CLK_AHB_PATA] = &ahb_pata_clk.common.hw,
+ [CLK_AHB_SATA] = &ahb_sata_clk.common.hw,
+ [CLK_AHB_GPS] = &ahb_gps_clk.common.hw,
+ [CLK_AHB_VE] = &ahb_ve_clk.common.hw,
+ [CLK_AHB_TVD] = &ahb_tvd_clk.common.hw,
+ [CLK_AHB_TVE0] = &ahb_tve0_clk.common.hw,
+ [CLK_AHB_TVE1] = &ahb_tve1_clk.common.hw,
+ [CLK_AHB_LCD0] = &ahb_lcd0_clk.common.hw,
+ [CLK_AHB_LCD1] = &ahb_lcd1_clk.common.hw,
+ [CLK_AHB_CSI0] = &ahb_csi0_clk.common.hw,
+ [CLK_AHB_CSI1] = &ahb_csi1_clk.common.hw,
+ [CLK_AHB_HDMI0] = &ahb_hdmi0_clk.common.hw,
+ [CLK_AHB_DE_BE0] = &ahb_de_be0_clk.common.hw,
+ [CLK_AHB_DE_BE1] = &ahb_de_be1_clk.common.hw,
+ [CLK_AHB_DE_FE0] = &ahb_de_fe0_clk.common.hw,
+ [CLK_AHB_DE_FE1] = &ahb_de_fe1_clk.common.hw,
+ [CLK_AHB_MP] = &ahb_mp_clk.common.hw,
+ [CLK_AHB_GPU] = &ahb_gpu_clk.common.hw,
+ [CLK_APB0_CODEC] = &apb0_codec_clk.common.hw,
+ [CLK_APB0_SPDIF] = &apb0_spdif_clk.common.hw,
+ [CLK_APB0_AC97] = &apb0_ac97_clk.common.hw,
+ [CLK_APB0_I2S0] = &apb0_i2s0_clk.common.hw,
+ [CLK_APB0_PIO] = &apb0_pio_clk.common.hw,
+ [CLK_APB0_IR0] = &apb0_ir0_clk.common.hw,
+ [CLK_APB0_IR1] = &apb0_ir1_clk.common.hw,
+ [CLK_APB0_KEYPAD] = &apb0_keypad_clk.common.hw,
+ [CLK_APB1_I2C0] = &apb1_i2c0_clk.common.hw,
+ [CLK_APB1_I2C1] = &apb1_i2c1_clk.common.hw,
+ [CLK_APB1_I2C2] = &apb1_i2c2_clk.common.hw,
+ [CLK_APB1_CAN] = &apb1_can_clk.common.hw,
+ [CLK_APB1_SCR] = &apb1_scr_clk.common.hw,
+ [CLK_APB1_PS20] = &apb1_ps20_clk.common.hw,
+ [CLK_APB1_PS21] = &apb1_ps21_clk.common.hw,
+ [CLK_APB1_UART0] = &apb1_uart0_clk.common.hw,
+ [CLK_APB1_UART1] = &apb1_uart1_clk.common.hw,
+ [CLK_APB1_UART2] = &apb1_uart2_clk.common.hw,
+ [CLK_APB1_UART3] = &apb1_uart3_clk.common.hw,
+ [CLK_APB1_UART4] = &apb1_uart4_clk.common.hw,
+ [CLK_APB1_UART5] = &apb1_uart5_clk.common.hw,
+ [CLK_APB1_UART6] = &apb1_uart6_clk.common.hw,
+ [CLK_APB1_UART7] = &apb1_uart7_clk.common.hw,
+ [CLK_NAND] = &nand_clk.common.hw,
+ [CLK_MS] = &ms_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_MMC3] = &mmc3_clk.common.hw,
+ [CLK_TS] = &ts_clk.common.hw,
+ [CLK_SS] = &ss_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_SPI2] = &spi2_clk.common.hw,
+ [CLK_PATA] = &pata_clk.common.hw,
+ [CLK_IR0] = &ir0_sun4i_clk.common.hw,
+ [CLK_IR1] = &ir1_sun4i_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_AC97] = &ac97_clk.common.hw,
+ [CLK_SPDIF] = &spdif_clk.common.hw,
+ [CLK_KEYPAD] = &keypad_clk.common.hw,
+ [CLK_SATA] = &sata_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
+ [CLK_USB_PHY] = &usb_phy_clk.common.hw,
+ [CLK_SPI3] = &spi3_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI0] = &dram_csi0_clk.common.hw,
+ [CLK_DRAM_CSI1] = &dram_csi1_clk.common.hw,
+ [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
+ [CLK_DRAM_TVD] = &dram_tvd_clk.common.hw,
+ [CLK_DRAM_TVE0] = &dram_tve0_clk.common.hw,
+ [CLK_DRAM_TVE1] = &dram_tve1_clk.common.hw,
+ [CLK_DRAM_OUT] = &dram_out_clk.common.hw,
+ [CLK_DRAM_DE_FE1] = &dram_de_fe1_clk.common.hw,
+ [CLK_DRAM_DE_FE0] = &dram_de_fe0_clk.common.hw,
+ [CLK_DRAM_DE_BE0] = &dram_de_be0_clk.common.hw,
+ [CLK_DRAM_DE_BE1] = &dram_de_be1_clk.common.hw,
+ [CLK_DRAM_MP] = &dram_mp_clk.common.hw,
+ [CLK_DRAM_ACE] = &dram_ace_clk.common.hw,
+ [CLK_DE_BE0] = &de_be0_clk.common.hw,
+ [CLK_DE_BE1] = &de_be1_clk.common.hw,
+ [CLK_DE_FE0] = &de_fe0_clk.common.hw,
+ [CLK_DE_FE1] = &de_fe1_clk.common.hw,
+ [CLK_DE_MP] = &de_mp_clk.common.hw,
+ [CLK_TCON0_CH0] = &tcon0_ch0_clk.common.hw,
+ [CLK_TCON1_CH0] = &tcon1_ch0_clk.common.hw,
+ [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
+ [CLK_TVD] = &tvd_sun4i_clk.common.hw,
+ [CLK_TCON0_CH1_SCLK2] = &tcon0_ch1_sclk2_clk.common.hw,
+ [CLK_TCON0_CH1] = &tcon0_ch1_clk.common.hw,
+ [CLK_TCON1_CH1_SCLK2] = &tcon1_ch1_sclk2_clk.common.hw,
+ [CLK_TCON1_CH1] = &tcon1_ch1_clk.common.hw,
+ [CLK_CSI0] = &csi0_clk.common.hw,
+ [CLK_CSI1] = &csi1_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_CODEC] = &codec_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_ACE] = &ace_clk.common.hw,
+ [CLK_HDMI] = &hdmi_clk.common.hw,
+ [CLK_GPU] = &gpu_sun7i_clk.common.hw,
+ [CLK_MBUS] = &mbus_sun4i_clk.common.hw,
+ },
+ .num = CLK_NUMBER_SUN4I,
+};
+static struct clk_hw_onecell_data sun7i_a20_hw_clks = {
+ .hws = {
+ [CLK_HOSC] = &hosc_clk.common.hw,
+ [CLK_PLL_CORE] = &pll_core_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
+ [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
+ [CLK_PLL_VE] = &pll_ve_sun7i_clk.common.hw,
+ [CLK_PLL_DDR_BASE] = &pll_ddr_base_clk.common.hw,
+ [CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
+ [CLK_PLL_DDR_OTHER] = &pll_ddr_other_clk.common.hw,
+ [CLK_PLL_PERIPH_BASE] = &pll_periph_base_clk.common.hw,
+ [CLK_PLL_PERIPH] = &pll_periph_clk.hw,
+ [CLK_PLL_PERIPH_SATA] = &pll_periph_sata_clk.common.hw,
+ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
+ [CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
+ [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
+ [CLK_CPU] = &cpu_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AHB] = &ahb_sun7i_clk.common.hw,
+ [CLK_APB0] = &apb0_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_AHB_OTG] = &ahb_otg_clk.common.hw,
+ [CLK_AHB_EHCI0] = &ahb_ehci0_clk.common.hw,
+ [CLK_AHB_OHCI0] = &ahb_ohci0_clk.common.hw,
+ [CLK_AHB_EHCI1] = &ahb_ehci1_clk.common.hw,
+ [CLK_AHB_OHCI1] = &ahb_ohci1_clk.common.hw,
+ [CLK_AHB_SS] = &ahb_ss_clk.common.hw,
+ [CLK_AHB_DMA] = &ahb_dma_clk.common.hw,
+ [CLK_AHB_BIST] = &ahb_bist_clk.common.hw,
+ [CLK_AHB_MMC0] = &ahb_mmc0_clk.common.hw,
+ [CLK_AHB_MMC1] = &ahb_mmc1_clk.common.hw,
+ [CLK_AHB_MMC2] = &ahb_mmc2_clk.common.hw,
+ [CLK_AHB_MMC3] = &ahb_mmc3_clk.common.hw,
+ [CLK_AHB_MS] = &ahb_ms_clk.common.hw,
+ [CLK_AHB_NAND] = &ahb_nand_clk.common.hw,
+ [CLK_AHB_SDRAM] = &ahb_sdram_clk.common.hw,
+ [CLK_AHB_ACE] = &ahb_ace_clk.common.hw,
+ [CLK_AHB_EMAC] = &ahb_emac_clk.common.hw,
+ [CLK_AHB_TS] = &ahb_ts_clk.common.hw,
+ [CLK_AHB_SPI0] = &ahb_spi0_clk.common.hw,
+ [CLK_AHB_SPI1] = &ahb_spi1_clk.common.hw,
+ [CLK_AHB_SPI2] = &ahb_spi2_clk.common.hw,
+ [CLK_AHB_SPI3] = &ahb_spi3_clk.common.hw,
+ [CLK_AHB_PATA] = &ahb_pata_clk.common.hw,
+ [CLK_AHB_SATA] = &ahb_sata_clk.common.hw,
+ [CLK_AHB_HSTIMER] = &ahb_hstimer_clk.common.hw,
+ [CLK_AHB_VE] = &ahb_ve_clk.common.hw,
+ [CLK_AHB_TVD] = &ahb_tvd_clk.common.hw,
+ [CLK_AHB_TVE0] = &ahb_tve0_clk.common.hw,
+ [CLK_AHB_TVE1] = &ahb_tve1_clk.common.hw,
+ [CLK_AHB_LCD0] = &ahb_lcd0_clk.common.hw,
+ [CLK_AHB_LCD1] = &ahb_lcd1_clk.common.hw,
+ [CLK_AHB_CSI0] = &ahb_csi0_clk.common.hw,
+ [CLK_AHB_CSI1] = &ahb_csi1_clk.common.hw,
+ [CLK_AHB_HDMI1] = &ahb_hdmi1_clk.common.hw,
+ [CLK_AHB_HDMI0] = &ahb_hdmi0_clk.common.hw,
+ [CLK_AHB_DE_BE0] = &ahb_de_be0_clk.common.hw,
+ [CLK_AHB_DE_BE1] = &ahb_de_be1_clk.common.hw,
+ [CLK_AHB_DE_FE0] = &ahb_de_fe0_clk.common.hw,
+ [CLK_AHB_DE_FE1] = &ahb_de_fe1_clk.common.hw,
+ [CLK_AHB_GMAC] = &ahb_gmac_clk.common.hw,
+ [CLK_AHB_MP] = &ahb_mp_clk.common.hw,
+ [CLK_AHB_GPU] = &ahb_gpu_clk.common.hw,
+ [CLK_APB0_CODEC] = &apb0_codec_clk.common.hw,
+ [CLK_APB0_SPDIF] = &apb0_spdif_clk.common.hw,
+ [CLK_APB0_AC97] = &apb0_ac97_clk.common.hw,
+ [CLK_APB0_I2S0] = &apb0_i2s0_clk.common.hw,
+ [CLK_APB0_I2S1] = &apb0_i2s1_clk.common.hw,
+ [CLK_APB0_PIO] = &apb0_pio_clk.common.hw,
+ [CLK_APB0_IR0] = &apb0_ir0_clk.common.hw,
+ [CLK_APB0_IR1] = &apb0_ir1_clk.common.hw,
+ [CLK_APB0_I2S2] = &apb0_i2s2_clk.common.hw,
+ [CLK_APB0_KEYPAD] = &apb0_keypad_clk.common.hw,
+ [CLK_APB1_I2C0] = &apb1_i2c0_clk.common.hw,
+ [CLK_APB1_I2C1] = &apb1_i2c1_clk.common.hw,
+ [CLK_APB1_I2C2] = &apb1_i2c2_clk.common.hw,
+ [CLK_APB1_I2C3] = &apb1_i2c3_clk.common.hw,
+ [CLK_APB1_CAN] = &apb1_can_clk.common.hw,
+ [CLK_APB1_SCR] = &apb1_scr_clk.common.hw,
+ [CLK_APB1_PS20] = &apb1_ps20_clk.common.hw,
+ [CLK_APB1_PS21] = &apb1_ps21_clk.common.hw,
+ [CLK_APB1_I2C4] = &apb1_i2c4_clk.common.hw,
+ [CLK_APB1_UART0] = &apb1_uart0_clk.common.hw,
+ [CLK_APB1_UART1] = &apb1_uart1_clk.common.hw,
+ [CLK_APB1_UART2] = &apb1_uart2_clk.common.hw,
+ [CLK_APB1_UART3] = &apb1_uart3_clk.common.hw,
+ [CLK_APB1_UART4] = &apb1_uart4_clk.common.hw,
+ [CLK_APB1_UART5] = &apb1_uart5_clk.common.hw,
+ [CLK_APB1_UART6] = &apb1_uart6_clk.common.hw,
+ [CLK_APB1_UART7] = &apb1_uart7_clk.common.hw,
+ [CLK_NAND] = &nand_clk.common.hw,
+ [CLK_MS] = &ms_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC0_OUTPUT] = &mmc0_output_clk.common.hw,
+ [CLK_MMC0_SAMPLE] = &mmc0_sample_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC1_OUTPUT] = &mmc1_output_clk.common.hw,
+ [CLK_MMC1_SAMPLE] = &mmc1_sample_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_MMC2_OUTPUT] = &mmc2_output_clk.common.hw,
+ [CLK_MMC2_SAMPLE] = &mmc2_sample_clk.common.hw,
+ [CLK_MMC3] = &mmc3_clk.common.hw,
+ [CLK_MMC3_OUTPUT] = &mmc3_output_clk.common.hw,
+ [CLK_MMC3_SAMPLE] = &mmc3_sample_clk.common.hw,
+ [CLK_TS] = &ts_clk.common.hw,
+ [CLK_SS] = &ss_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_SPI2] = &spi2_clk.common.hw,
+ [CLK_PATA] = &pata_clk.common.hw,
+ [CLK_IR0] = &ir0_sun7i_clk.common.hw,
+ [CLK_IR1] = &ir1_sun7i_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_AC97] = &ac97_clk.common.hw,
+ [CLK_SPDIF] = &spdif_clk.common.hw,
+ [CLK_KEYPAD] = &keypad_clk.common.hw,
+ [CLK_SATA] = &sata_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
+ [CLK_USB_PHY] = &usb_phy_clk.common.hw,
+ [CLK_SPI3] = &spi3_clk.common.hw,
+ [CLK_I2S1] = &i2s1_clk.common.hw,
+ [CLK_I2S2] = &i2s2_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI0] = &dram_csi0_clk.common.hw,
+ [CLK_DRAM_CSI1] = &dram_csi1_clk.common.hw,
+ [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
+ [CLK_DRAM_TVD] = &dram_tvd_clk.common.hw,
+ [CLK_DRAM_TVE0] = &dram_tve0_clk.common.hw,
+ [CLK_DRAM_TVE1] = &dram_tve1_clk.common.hw,
+ [CLK_DRAM_OUT] = &dram_out_clk.common.hw,
+ [CLK_DRAM_DE_FE1] = &dram_de_fe1_clk.common.hw,
+ [CLK_DRAM_DE_FE0] = &dram_de_fe0_clk.common.hw,
+ [CLK_DRAM_DE_BE0] = &dram_de_be0_clk.common.hw,
+ [CLK_DRAM_DE_BE1] = &dram_de_be1_clk.common.hw,
+ [CLK_DRAM_MP] = &dram_mp_clk.common.hw,
+ [CLK_DRAM_ACE] = &dram_ace_clk.common.hw,
+ [CLK_DE_BE0] = &de_be0_clk.common.hw,
+ [CLK_DE_BE1] = &de_be1_clk.common.hw,
+ [CLK_DE_FE0] = &de_fe0_clk.common.hw,
+ [CLK_DE_FE1] = &de_fe1_clk.common.hw,
+ [CLK_DE_MP] = &de_mp_clk.common.hw,
+ [CLK_TCON0_CH0] = &tcon0_ch0_clk.common.hw,
+ [CLK_TCON1_CH0] = &tcon1_ch0_clk.common.hw,
+ [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
+ [CLK_TVD_SCLK2] = &tvd_sclk2_sun7i_clk.common.hw,
+ [CLK_TVD] = &tvd_sclk1_sun7i_clk.common.hw,
+ [CLK_TCON0_CH1_SCLK2] = &tcon0_ch1_sclk2_clk.common.hw,
+ [CLK_TCON0_CH1] = &tcon0_ch1_clk.common.hw,
+ [CLK_TCON1_CH1_SCLK2] = &tcon1_ch1_sclk2_clk.common.hw,
+ [CLK_TCON1_CH1] = &tcon1_ch1_clk.common.hw,
+ [CLK_CSI0] = &csi0_clk.common.hw,
+ [CLK_CSI1] = &csi1_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_CODEC] = &codec_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_ACE] = &ace_clk.common.hw,
+ [CLK_HDMI] = &hdmi_clk.common.hw,
+ [CLK_GPU] = &gpu_sun7i_clk.common.hw,
+ [CLK_MBUS] = &mbus_sun7i_clk.common.hw,
+ [CLK_HDMI1_SLOW] = &hdmi1_slow_clk.common.hw,
+ [CLK_HDMI1] = &hdmi1_clk.common.hw,
+ [CLK_OUT_A] = &out_a_clk.common.hw,
+ [CLK_OUT_B] = &out_b_clk.common.hw,
+ },
+ .num = CLK_NUMBER_SUN7I,
+};
+
+static struct ccu_reset_map sun7i_a20_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
+ [RST_USB_PHY2] = { 0x0cc, BIT(2) },
+ [RST_GPS] = { 0x0d0, BIT(0) },
+ [RST_DE_BE0] = { 0x104, BIT(30) },
+ [RST_DE_BE1] = { 0x108, BIT(30) },
+ [RST_DE_FE0] = { 0x10c, BIT(30) },
+ [RST_DE_FE1] = { 0x110, BIT(30) },
+ [RST_DE_MP] = { 0x114, BIT(30) },
+ [RST_TCON0] = { 0x118, BIT(30) },
+ [RST_TCON1] = { 0x11c, BIT(30) },
+ [RST_CSI0] = { 0x134, BIT(30) },
+ [RST_CSI1] = { 0x138, BIT(30) },
+ [RST_VE] = { 0x13c, BIT(0) },
+ [RST_ACE] = { 0x148, BIT(16) },
+ [RST_LVDS] = { 0x14c, BIT(0) },
+ [RST_GPU] = { 0x154, BIT(30) },
+ [RST_HDMI_H] = { 0x170, BIT(0) },
+ [RST_HDMI_SYS] = { 0x170, BIT(1) },
+ [RST_HDMI_AUDIO_DMA] = { 0x170, BIT(2) },
+};
+
+static const struct sunxi_ccu_desc sun4i_a10_ccu_desc = {
+ .ccu_clks = sun4i_sun7i_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun4i_sun7i_ccu_clks),
+
+ .hw_clks = &sun4i_a10_hw_clks,
+
+ .resets = sun7i_a20_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun7i_a20_ccu_resets),
+};
+
+static const struct sunxi_ccu_desc sun7i_a20_ccu_desc = {
+ .ccu_clks = sun4i_sun7i_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun4i_sun7i_ccu_clks),
+
+ .hw_clks = &sun7i_a20_hw_clks,
+
+ .resets = sun7i_a20_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun7i_a20_ccu_resets),
+};
+
+static void __init sun4i_ccu_init(struct device_node *node,
+ const struct sunxi_ccu_desc *desc)
+{
+ void __iomem *reg;
+ u32 val;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg)) {
+ pr_err("%s: Could not map the clock registers\n",
+ of_node_full_name(node));
+ return;
+ }
+
+ /* Force the PLL-Audio-1x divider to 4 */
+ val = readl(reg + SUN4I_PLL_AUDIO_REG);
+ val &= ~GENMASK(19, 16);
+ writel(val | (3 << 16), reg + SUN4I_PLL_AUDIO_REG);
+
+ /*
+ * Use the peripheral PLL6 as the AHB parent, instead of CPU /
+ * AXI which have rate changes due to cpufreq.
+ *
+ * This is especially a big deal for the HS timer whose parent
+ * clock is AHB.
+ */
+ val = readl(reg + SUN4I_AHB_REG);
+ val &= ~GENMASK(7, 6);
+ writel(val | (2 << 6), reg + SUN4I_AHB_REG);
+
+ sunxi_ccu_probe(node, reg, desc);
+}
+
+static void __init sun4i_a10_ccu_setup(struct device_node *node)
+{
+ sun4i_ccu_init(node, &sun4i_a10_ccu_desc);
+}
+CLK_OF_DECLARE(sun4i_a10_ccu, "allwinner,sun4i-a10-ccu",
+ sun4i_a10_ccu_setup);
+
+static void __init sun7i_a20_ccu_setup(struct device_node *node)
+{
+ sun4i_ccu_init(node, &sun7i_a20_ccu_desc);
+}
+CLK_OF_DECLARE(sun7i_a20_ccu, "allwinner,sun7i-a20-ccu",
+ sun7i_a20_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun4i-a10.h b/drivers/clk/sunxi-ng/ccu-sun4i-a10.h
new file mode 100644
index 0000000..883b730
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2017 Priit Laes
+ *
+ * Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN4I_A10_H_
+#define _CCU_SUN4I_A10_H_
+
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+/* The HOSC is exported */
+#define CLK_PLL_CORE 2
+#define CLK_PLL_AUDIO_BASE 3
+#define CLK_PLL_AUDIO 4
+#define CLK_PLL_AUDIO_2X 5
+#define CLK_PLL_AUDIO_4X 6
+#define CLK_PLL_AUDIO_8X 7
+#define CLK_PLL_VIDEO0 8
+#define CLK_PLL_VIDEO0_2X 9
+#define CLK_PLL_VE 10
+#define CLK_PLL_DDR_BASE 11
+#define CLK_PLL_DDR 12
+#define CLK_PLL_DDR_OTHER 13
+#define CLK_PLL_PERIPH_BASE 14
+#define CLK_PLL_PERIPH 15
+#define CLK_PLL_PERIPH_SATA 16
+#define CLK_PLL_VIDEO1 17
+#define CLK_PLL_VIDEO1_2X 18
+#define CLK_PLL_GPU 19
+
+/* The CPU clock is exported */
+#define CLK_AXI 21
+#define CLK_AXI_DRAM 22
+#define CLK_AHB 23
+#define CLK_APB0 24
+#define CLK_APB1 25
+
+/* AHB gates are exported (23..68) */
+/* APB0 gates are exported (69..78) */
+/* APB1 gates are exported (79..95) */
+/* IP module clocks are exported (96..128) */
+/* DRAM gates are exported (129..142)*/
+/* Media (display engine clocks & etc) are exported (143..169) */
+
+#define CLK_NUMBER_SUN4I (CLK_MBUS + 1)
+#define CLK_NUMBER_SUN7I (CLK_OUT_B + 1)
+
+#endif /* _CCU_SUN4I_A10_H_ */
diff --git a/include/dt-bindings/clock/sun4i-a10-ccu.h b/include/dt-bindings/clock/sun4i-a10-ccu.h
new file mode 100644
index 0000000..28e6abe
--- /dev/null
+++ b/include/dt-bindings/clock/sun4i-a10-ccu.h
@@ -0,0 +1,207 @@
+/*
+ * Copyright (C) 2017 Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUNXI_A10_H_
+#define _DT_BINDINGS_CLK_SUNXI_A10_H_
+
+#define CLK_HOSC 1
+#define CLK_CPU 20
+
+/* AHB Gates */
+#define CLK_AHB_OTG 26
+#define CLK_AHB_EHCI0 27
+#define CLK_AHB_OHCI0 28
+#define CLK_AHB_EHCI1 29
+#define CLK_AHB_OHCI1 30
+#define CLK_AHB_SS 31
+#define CLK_AHB_DMA 32
+#define CLK_AHB_BIST 33
+#define CLK_AHB_MMC0 34
+#define CLK_AHB_MMC1 35
+#define CLK_AHB_MMC2 36
+#define CLK_AHB_MMC3 37
+#define CLK_AHB_MS 38
+#define CLK_AHB_NAND 39
+#define CLK_AHB_SDRAM 40
+#define CLK_AHB_ACE 41
+#define CLK_AHB_EMAC 42
+#define CLK_AHB_TS 43
+#define CLK_AHB_SPI0 44
+#define CLK_AHB_SPI1 45
+#define CLK_AHB_SPI2 46
+#define CLK_AHB_SPI3 47
+#define CLK_AHB_PATA 48
+#define CLK_AHB_SATA 49
+#define CLK_AHB_GPS 50
+#define CLK_AHB_HSTIMER 51
+#define CLK_AHB_VE 52
+#define CLK_AHB_TVD 53
+#define CLK_AHB_TVE0 54
+#define CLK_AHB_TVE1 55
+#define CLK_AHB_LCD0 56
+#define CLK_AHB_LCD1 57
+#define CLK_AHB_CSI0 58
+#define CLK_AHB_CSI1 59
+#define CLK_AHB_HDMI0 60
+#define CLK_AHB_HDMI1 61
+#define CLK_AHB_DE_BE0 62
+#define CLK_AHB_DE_BE1 63
+#define CLK_AHB_DE_FE0 64
+#define CLK_AHB_DE_FE1 65
+#define CLK_AHB_GMAC 66
+#define CLK_AHB_MP 67
+#define CLK_AHB_GPU 68
+
+/* APB0 Gates */
+#define CLK_APB0_CODEC 69
+#define CLK_APB0_SPDIF 70
+#define CLK_APB0_I2S0 71
+#define CLK_APB0_AC97 72
+#define CLK_APB0_I2S1 73
+#define CLK_APB0_PIO 74
+#define CLK_APB0_IR0 75
+#define CLK_APB0_IR1 76
+#define CLK_APB0_I2S2 77
+#define CLK_APB0_KEYPAD 78
+
+/* APB1 Gates */
+#define CLK_APB1_I2C0 79
+#define CLK_APB1_I2C1 80
+#define CLK_APB1_I2C2 81
+#define CLK_APB1_I2C3 82
+#define CLK_APB1_CAN 83
+#define CLK_APB1_SCR 84
+#define CLK_APB1_PS20 85
+#define CLK_APB1_PS21 86
+#define CLK_APB1_I2C4 87
+#define CLK_APB1_UART0 88
+#define CLK_APB1_UART1 89
+#define CLK_APB1_UART2 90
+#define CLK_APB1_UART3 91
+#define CLK_APB1_UART4 92
+#define CLK_APB1_UART5 93
+#define CLK_APB1_UART6 94
+#define CLK_APB1_UART7 95
+
+/* IP clocks */
+#define CLK_NAND 96
+#define CLK_MS 97
+#define CLK_MMC0 98
+#define CLK_MMC0_OUTPUT 99
+#define CLK_MMC0_SAMPLE 100
+#define CLK_MMC1 101
+#define CLK_MMC1_OUTPUT 102
+#define CLK_MMC1_SAMPLE 103
+#define CLK_MMC2 104
+#define CLK_MMC2_OUTPUT 105
+#define CLK_MMC2_SAMPLE 106
+#define CLK_MMC3 107
+#define CLK_MMC3_OUTPUT 108
+#define CLK_MMC3_SAMPLE 109
+#define CLK_TS 110
+#define CLK_SS 111
+#define CLK_SPI0 112
+#define CLK_SPI1 113
+#define CLK_SPI2 114
+#define CLK_PATA 115
+#define CLK_IR0 116
+#define CLK_IR1 117
+#define CLK_I2S0 118
+#define CLK_AC97 119
+#define CLK_SPDIF 120
+#define CLK_KEYPAD 121
+#define CLK_SATA 122
+#define CLK_USB_OHCI0 123
+#define CLK_USB_OHCI1 124
+#define CLK_USB_PHY 125
+#define CLK_SPI3 126
+#define CLK_I2S1 127
+#define CLK_I2S2 128
+
+/* DRAM Gates */
+#define CLK_DRAM_VE 129
+#define CLK_DRAM_CSI0 130
+#define CLK_DRAM_CSI1 131
+#define CLK_DRAM_TS 132
+#define CLK_DRAM_TVD 133
+#define CLK_DRAM_TVE0 134
+#define CLK_DRAM_TVE1 135
+#define CLK_DRAM_OUT 136
+#define CLK_DRAM_DE_FE1 137
+#define CLK_DRAM_DE_FE0 138
+#define CLK_DRAM_DE_BE0 139
+#define CLK_DRAM_DE_BE1 140
+#define CLK_DRAM_MP 141
+#define CLK_DRAM_ACE 142
+
+/* Display Engine Clocks */
+#define CLK_DE_BE0 143
+#define CLK_DE_BE1 144
+#define CLK_DE_FE0 145
+#define CLK_DE_FE1 146
+#define CLK_DE_MP 147
+#define CLK_TCON0_CH0 148
+#define CLK_TCON1_CH0 149
+#define CLK_CSI_SCLK 150
+#define CLK_TVD_SCLK2 151
+#define CLK_TVD 152
+#define CLK_TCON0_CH1_SCLK2 153
+#define CLK_TCON0_CH1 154
+#define CLK_TCON1_CH1_SCLK2 155
+#define CLK_TCON1_CH1 156
+#define CLK_CSI0 157
+#define CLK_CSI1 158
+#define CLK_CODEC 159
+#define CLK_VE 160
+#define CLK_AVS 161
+#define CLK_ACE 162
+#define CLK_HDMI 163
+#define CLK_GPU 164
+
+/* Following only exist on sun7i-a20 */
+#define CLK_MBUS 165
+#define CLK_HDMI1_SLOW 166
+#define CLK_HDMI1 167
+#define CLK_OUT_A 168
+#define CLK_OUT_B 169
+
+#endif /* _DT_BINDINGS_CLK_SUNXI_A10_H_ */
diff --git a/include/dt-bindings/reset/sun4i-a10-ccu.h b/include/dt-bindings/reset/sun4i-a10-ccu.h
new file mode 100644
index 0000000..e6f6b6e
--- /dev/null
+++ b/include/dt-bindings/reset/sun4i-a10-ccu.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2017 Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN4I_A10_H
+#define _DT_BINDINGS_RST_SUN4I_A10_H
+
+#define RST_USB_PHY0 1
+#define RST_USB_PHY1 2
+#define RST_USB_PHY2 3
+#define RST_GPS 4
+#define RST_DE_BE0 5
+#define RST_DE_BE1 6
+#define RST_DE_FE0 7
+#define RST_DE_FE1 8
+#define RST_DE_MP 9
+#define RST_TCON0 10
+#define RST_TCON1 11
+#define RST_CSI0 12
+#define RST_CSI1 13
+#define RST_VE 14
+#define RST_ACE 15
+#define RST_LVDS 16
+#define RST_GPU 17
+#define RST_HDMI_H 18
+#define RST_HDMI_SYS 19
+#define RST_HDMI_AUDIO_DMA 20
+
+#endif /* DT_BINDINGS_RST_SUN4I_A10_H */
--
git-series 0.9.1
^ permalink raw reply related
* [PATCH v3 2/5] dt-bindings: List devicetree binding for the CCU of Allwinner A20
From: Priit Laes @ 2017-04-26 19:32 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA
Cc: Philipp Zabel, Russell King, Chen-Yu Tsai, Maxime Ripard,
Mark Rutland, Rob Herring, Stephen Boyd, Michael Turquette,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Priit Laes
In-Reply-To: <cover.908ce010a25e503bb5ad0967759c723219c6ed0d.1493235134.git-series.plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
Allwinner A20 is now driven by sunxi-ng CCU driver.
Add devicetree binding for it.
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
---
Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index e9c5a1d..9ed2ec8 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -4,6 +4,7 @@ Allwinner Clock Control Unit Binding
Required properties :
- compatible: must contain one of the following compatibles:
- "allwinner,sun6i-a31-ccu"
+ - "allwinner,sun7i-a20-ccu"
- "allwinner,sun8i-a23-ccu"
- "allwinner,sun8i-a33-ccu"
- "allwinner,sun8i-h3-ccu"
--
git-series 0.9.1
^ permalink raw reply related
* [PATCH v3 3/5] dt-bindings: List devicetree binding for the CCU of Allwinner A10
From: Priit Laes @ 2017-04-26 19:32 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA
Cc: Philipp Zabel, Russell King, Chen-Yu Tsai, Maxime Ripard,
Mark Rutland, Rob Herring, Stephen Boyd, Michael Turquette,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Priit Laes
In-Reply-To: <cover.908ce010a25e503bb5ad0967759c723219c6ed0d.1493235134.git-series.plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
Allwinner A10 is now driven by sunxi-ng CCU driver.
Add devicetree binding for it.
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
---
Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index 9ed2ec8..d8ce5f8 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -3,6 +3,7 @@ Allwinner Clock Control Unit Binding
Required properties :
- compatible: must contain one of the following compatibles:
+ - "allwinner,sun4i-a10-ccu"
- "allwinner,sun6i-a31-ccu"
- "allwinner,sun7i-a20-ccu"
- "allwinner,sun8i-a23-ccu"
--
git-series 0.9.1
^ permalink raw reply related
* [PATCH v3 4/5] ARM: sun7i: Convert to CCU
From: Priit Laes @ 2017-04-26 19:32 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA
Cc: Philipp Zabel, Russell King, Chen-Yu Tsai, Maxime Ripard,
Mark Rutland, Rob Herring, Stephen Boyd, Michael Turquette,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Priit Laes
In-Reply-To: <cover.908ce010a25e503bb5ad0967759c723219c6ed0d.1493235134.git-series.plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
Convert sun7i-a20.dtsi to new CCU driver.
Tested on Cubietruck.
Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 720 +++-----------------------------
1 file changed, 86 insertions(+), 634 deletions(-)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 93aa559..7590cc4 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -47,7 +47,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
-#include <dt-bindings/clock/sun4i-a10-pll2.h>
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
#include <dt-bindings/dma/sun4i-a10.h>
/ {
@@ -66,9 +67,10 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>, <&de_be0_clk>,
- <&tcon0_ch1_clk>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+ <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+ <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>,
+ <&ccu CLK_HDMI>;
status = "disabled";
};
@@ -76,9 +78,9 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
- clocks = <&ahb_gates 36>, <&ahb_gates 44>,
- <&de_be0_clk>, <&tcon0_ch0_clk>,
- <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH0>,
+ <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
@@ -86,10 +88,10 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-tve0";
- clocks = <&ahb_gates 34>, <&ahb_gates 36>,
- <&ahb_gates 44>,
- <&de_be0_clk>, <&tcon0_ch1_clk>,
- <&dram_gates 5>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+ <&ccu CLK_AHB_DE_BE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH1>,
+ <&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
};
@@ -102,7 +104,7 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
- clocks = <&cpu>;
+ clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
@@ -183,21 +185,11 @@
osc24M: clk@01c20050 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-osc-clk";
- reg = <0x01c20050 0x4>;
+ compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
- osc3M: osc3M_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <8>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "osc3M";
- };
-
osc32k: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -205,528 +197,6 @@
clock-output-names = "osc32k";
};
- pll1: clk@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
- };
-
- pll2: clk@01c20008 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll2-clk";
- reg = <0x01c20008 0x8>;
- clocks = <&osc24M>;
- clock-output-names = "pll2-1x", "pll2-2x",
- "pll2-4x", "pll2-8x";
- };
-
- pll3: clk@01c20010 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20010 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll3";
- };
-
- pll3x2: pll3x2_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&pll3>;
- clock-div = <1>;
- clock-mult = <2>;
- clock-output-names = "pll3-2x";
- };
-
- pll4: clk@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-pll4-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
- };
-
- pll5: clk@01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
- pll6: clk@01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6",
- "pll6_div_4";
- };
-
- pll7: clk@01c20030 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20030 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll7";
- };
-
- pll7x2: pll7x2_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&pll7>;
- clock-div = <1>;
- clock-mult = <2>;
- clock-output-names = "pll7-2x";
- };
-
- pll8: clk@01c20040 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-pll4-clk";
- reg = <0x01c20040 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll8";
- };
-
- cpu: cpu@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
- clock-output-names = "cpu";
- };
-
- axi: axi@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
- };
-
- ahb: ahb@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>, <&pll6 3>, <&pll6 1>;
- clock-output-names = "ahb";
- /*
- * Use PLL6 as parent, instead of CPU/AXI
- * which has rate changes due to cpufreq
- */
- assigned-clocks = <&ahb>;
- assigned-clock-parents = <&pll6 3>;
- };
-
- ahb_gates: clk@01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <5>, <6>, <7>, <8>,
- <9>, <10>, <11>, <12>,
- <13>, <14>, <16>,
- <17>, <18>, <20>, <21>,
- <22>, <23>, <25>,
- <28>, <32>, <33>, <34>,
- <35>, <36>, <37>, <40>,
- <41>, <42>, <43>,
- <44>, <45>, <46>,
- <47>, <49>, <50>,
- <52>;
- clock-output-names = "ahb_usb0", "ahb_ehci0",
- "ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
- "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
- "ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms",
- "ahb_nand", "ahb_sdram", "ahb_ace",
- "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
- "ahb_spi2", "ahb_spi3", "ahb_sata",
- "ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0",
- "ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0",
- "ahb_csi1", "ahb_hdmi1", "ahb_hdmi0",
- "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
- "ahb_de_fe1", "ahb_gmac", "ahb_mp",
- "ahb_mali";
- };
-
- apb0: apb0@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
- };
-
- apb0_gates: clk@01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb0>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <5>, <6>, <7>,
- <8>, <10>;
- clock-output-names = "apb0_codec", "apb0_spdif",
- "apb0_ac97", "apb0_i2s0", "apb0_i2s1",
- "apb0_pio", "apb0_ir0", "apb0_ir1",
- "apb0_i2s2", "apb0_keypad";
- };
-
- apb1: clk@01c20058 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1";
- };
-
- apb1_gates: clk@01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb1>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <5>, <6>, <7>,
- <15>, <16>, <17>,
- <18>, <19>, <20>,
- <21>, <22>, <23>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
- "apb1_i2c2", "apb1_i2c3", "apb1_can",
- "apb1_scr", "apb1_ps20", "apb1_ps21",
- "apb1_i2c4", "apb1_uart0", "apb1_uart1",
- "apb1_uart2", "apb1_uart3", "apb1_uart4",
- "apb1_uart5", "apb1_uart6", "apb1_uart7";
- };
-
- nand_clk: clk@01c20080 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
- };
-
- ms_clk: clk@01c20084 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
- };
-
- mmc0_clk: clk@01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: clk@01c2008c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: clk@01c20090 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
- };
-
- mmc3_clk: clk@01c20094 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20094 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc3",
- "mmc3_output",
- "mmc3_sample";
- };
-
- ts_clk: clk@01c20098 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
- };
-
- ss_clk: clk@01c2009c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
- };
-
- spi0_clk: clk@01c200a0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
- };
-
- spi1_clk: clk@01c200a4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
- };
-
- spi2_clk: clk@01c200a8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
- };
-
- pata_clk: clk@01c200ac {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200ac 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "pata";
- };
-
- ir0_clk: clk@01c200b0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
- };
-
- ir1_clk: clk@01c200b4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir1";
- };
-
- i2s0_clk: clk@01c200b8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200b8 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "i2s0";
- };
-
- ac97_clk: clk@01c200bc {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200bc 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "ac97";
- };
-
- spdif_clk: clk@01c200c0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200c0 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "spdif";
- };
-
- keypad_clk: clk@01c200c4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200c4 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "keypad";
- };
-
- usb_clk: clk@01c200cc {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-usb-clk";
- reg = <0x01c200cc 0x4>;
- clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_ohci1",
- "usb_phy";
- };
-
- spi3_clk: clk@01c200d4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200d4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi3";
- };
-
- i2s1_clk: clk@01c200d8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200d8 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "i2s1";
- };
-
- i2s2_clk: clk@01c200dc {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200dc 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "i2s2";
- };
-
- dram_gates: clk@01c20100 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-dram-gates-clk";
- reg = <0x01c20100 0x4>;
- clocks = <&pll5 0>;
- clock-indices = <0>,
- <1>, <2>,
- <3>,
- <4>,
- <5>, <6>,
- <15>,
- <24>, <25>,
- <26>, <27>,
- <28>, <29>;
- clock-output-names = "dram_ve",
- "dram_csi0", "dram_csi1",
- "dram_ts",
- "dram_tvd",
- "dram_tve0", "dram_tve1",
- "dram_output",
- "dram_de_fe1", "dram_de_fe0",
- "dram_de_be0", "dram_de_be1",
- "dram_de_mp", "dram_ace";
- };
-
- de_be0_clk: clk@01c20104 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20104 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be0";
- };
-
- de_be1_clk: clk@01c20108 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20108 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be1";
- };
-
- de_fe0_clk: clk@01c2010c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c2010c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe0";
- };
-
- de_fe1_clk: clk@01c20110 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20110 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe1";
- };
-
- tcon0_ch0_clk: clk@01c20118 {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c20118 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch0-sclk";
-
- };
-
- tcon1_ch0_clk: clk@01c2011c {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c2011c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch0-sclk";
-
- };
-
- tcon0_ch1_clk: clk@01c2012c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c2012c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch1-sclk";
-
- };
-
- tcon1_ch1_clk: clk@01c20130 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c20130 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch1-sclk";
-
- };
-
- ve_clk: clk@01c2013c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-ve-clk";
- reg = <0x01c2013c 0x4>;
- clocks = <&pll4>;
- clock-output-names = "ve";
- };
-
- codec_clk: clk@01c20140 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec-clk";
- reg = <0x01c20140 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "codec";
- };
-
- mbus_clk: clk@01c2015c {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-mbus-clk";
- reg = <0x01c2015c 0x4>;
- clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
- clock-output-names = "mbus";
- };
-
/*
* The following two are dummy clocks, placeholders
* used in the gmac_tx clock. The gmac driver will
@@ -736,14 +206,14 @@
* The actual TX clock rate is not controlled by the
* gmac_tx clock.
*/
- mii_phy_tx_clk: clk@2 {
+ mii_phy_tx_clk: clk@1 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
clock-output-names = "mii_phy_tx";
};
- gmac_int_tx_clk: clk@3 {
+ gmac_int_tx_clk: clk@2 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
@@ -757,34 +227,6 @@
clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
clock-output-names = "gmac_tx";
};
-
- /*
- * Dummy clock used by output clocks
- */
- osc24M_32k: clk@1 {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <750>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "osc24M_32k";
- };
-
- clk_out_a: clk@01c201f0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-out-clk";
- reg = <0x01c201f0 0x4>;
- clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
- clock-output-names = "clk_out_a";
- };
-
- clk_out_b: clk@01c201f4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-out-clk";
- reg = <0x01c201f4 0x4>;
- clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
- clock-output-names = "clk_out_b";
- };
};
soc@01c00000 {
@@ -841,7 +283,7 @@
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 6>;
+ clocks = <&ccu CLK_AHB_DMA>;
#dma-cells = <2>;
};
@@ -849,7 +291,7 @@
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 13>, <&nand_clk>;
+ clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 3>;
dma-names = "rxtx";
@@ -862,7 +304,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 27>,
<&dma SUN4I_DMA_DEDICATED 26>;
@@ -877,7 +319,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c06000 0x1000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 9>,
<&dma SUN4I_DMA_DEDICATED 8>;
@@ -892,7 +334,7 @@
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 17>;
+ clocks = <&ccu CLK_AHB_EMAC>;
allwinner,sram = <&emac_sram 1>;
status = "disabled";
};
@@ -908,10 +350,10 @@
mmc0: mmc@01c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
- clocks = <&ahb_gates 8>,
- <&mmc0_clk 0>,
- <&mmc0_clk 1>,
- <&mmc0_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC0>,
+ <&ccu CLK_MMC0>,
+ <&ccu CLK_MMC0_OUTPUT>,
+ <&ccu CLK_MMC0_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -925,10 +367,10 @@
mmc1: mmc@01c10000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c10000 0x1000>;
- clocks = <&ahb_gates 9>,
- <&mmc1_clk 0>,
- <&mmc1_clk 1>,
- <&mmc1_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC1>,
+ <&ccu CLK_MMC1>,
+ <&ccu CLK_MMC1_OUTPUT>,
+ <&ccu CLK_MMC1_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -942,10 +384,10 @@
mmc2: mmc@01c11000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c11000 0x1000>;
- clocks = <&ahb_gates 10>,
- <&mmc2_clk 0>,
- <&mmc2_clk 1>,
- <&mmc2_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC2>,
+ <&ccu CLK_MMC2>,
+ <&ccu CLK_MMC2_OUTPUT>,
+ <&ccu CLK_MMC2_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -959,10 +401,10 @@
mmc3: mmc@01c12000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c12000 0x1000>;
- clocks = <&ahb_gates 11>,
- <&mmc3_clk 0>,
- <&mmc3_clk 1>,
- <&mmc3_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC3>,
+ <&ccu CLK_MMC3>,
+ <&ccu CLK_MMC3_OUTPUT>,
+ <&ccu CLK_MMC3_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -976,7 +418,7 @@
usb_otg: usb@01c13000 {
compatible = "allwinner,sun4i-a10-musb";
reg = <0x01c13000 0x0400>;
- clocks = <&ahb_gates 0>;
+ clocks = <&ccu CLK_AHB_OTG>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
phys = <&usbphy 0>;
@@ -991,9 +433,11 @@
compatible = "allwinner,sun7i-a20-usb-phy";
reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
reg-names = "phy_ctrl", "pmu1", "pmu2";
- clocks = <&usb_clk 8>;
+ clocks = <&ccu CLK_USB_PHY>;
clock-names = "usb_phy";
- resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>;
reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
status = "disabled";
};
@@ -1002,7 +446,7 @@
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 1>;
+ clocks = <&ccu CLK_AHB_EHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -1012,7 +456,7 @@
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -1022,7 +466,7 @@
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 5>, <&ss_clk>;
+ clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
clock-names = "ahb", "mod";
};
@@ -1030,7 +474,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 29>,
<&dma SUN4I_DMA_DEDICATED 28>;
@@ -1045,7 +489,7 @@
compatible = "allwinner,sun4i-a10-ahci";
reg = <0x01c18000 0x1000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pll6 0>, <&ahb_gates 25>;
+ clocks = <&ccu CLK_AHB_SATA>;
status = "disabled";
};
@@ -1053,7 +497,7 @@
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 3>;
+ clocks = <&ccu CLK_AHB_EHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@@ -1063,7 +507,7 @@
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_clk 7>, <&ahb_gates 4>;
+ clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@@ -1073,7 +517,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 23>, <&spi3_clk>;
+ clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 31>,
<&dma SUN4I_DMA_DEDICATED 30>;
@@ -1084,11 +528,20 @@
num-cs = <1>;
};
+ ccu: clock@01c20000 {
+ compatible = "allwinner,sun7i-a20-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
pio: pinctrl@01c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
@@ -1365,7 +818,7 @@
compatible = "allwinner,sun4i-a10-spdif";
reg = <0x01c21000 0x400>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 1>, <&spdif_clk>;
+ clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
clock-names = "apb", "spdif";
dmas = <&dma SUN4I_DMA_NORMAL 2>,
<&dma SUN4I_DMA_NORMAL 2>;
@@ -1375,7 +828,7 @@
ir0: ir@01c21800 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 6>, <&ir0_clk>;
+ clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
clock-names = "apb", "ir";
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21800 0x40>;
@@ -1384,7 +837,7 @@
ir1: ir@01c21c00 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 7>, <&ir1_clk>;
+ clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
clock-names = "apb", "ir";
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21c00 0x40>;
@@ -1396,7 +849,7 @@
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c22000 0x400>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 4>, <&i2s1_clk>;
+ clocks = <&ccu CLK_APB0_I2S1>, <&ccu CLK_I2S1>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 4>,
<&dma SUN4I_DMA_NORMAL 4>;
@@ -1409,7 +862,7 @@
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c22400 0x400>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 3>, <&i2s0_clk>;
+ clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 3>,
<&dma SUN4I_DMA_NORMAL 3>;
@@ -1429,7 +882,7 @@
compatible = "allwinner,sun7i-a20-codec";
reg = <0x01c22c00 0x40>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 0>, <&codec_clk>;
+ clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
clock-names = "apb", "codec";
dmas = <&dma SUN4I_DMA_NORMAL 19>,
<&dma SUN4I_DMA_NORMAL 19>;
@@ -1447,7 +900,7 @@
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c24400 0x400>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 8>, <&i2s2_clk>;
+ clocks = <&ccu CLK_APB0_I2S2>, <&ccu CLK_I2S2>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 6>,
<&dma SUN4I_DMA_NORMAL 6>;
@@ -1468,7 +921,7 @@
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 16>;
+ clocks = <&ccu CLK_APB1_UART0>;
status = "disabled";
};
@@ -1478,7 +931,7 @@
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 17>;
+ clocks = <&ccu CLK_APB1_UART1>;
status = "disabled";
};
@@ -1488,7 +941,7 @@
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 18>;
+ clocks = <&ccu CLK_APB1_UART2>;
status = "disabled";
};
@@ -1498,7 +951,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 19>;
+ clocks = <&ccu CLK_APB1_UART3>;
status = "disabled";
};
@@ -1508,7 +961,7 @@
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 20>;
+ clocks = <&ccu CLK_APB1_UART4>;
status = "disabled";
};
@@ -1518,7 +971,7 @@
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 21>;
+ clocks = <&ccu CLK_APB1_UART5>;
status = "disabled";
};
@@ -1528,7 +981,7 @@
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 22>;
+ clocks = <&ccu CLK_APB1_UART6>;
status = "disabled";
};
@@ -1538,7 +991,7 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 23>;
+ clocks = <&ccu CLK_APB1_UART7>;
status = "disabled";
};
@@ -1546,7 +999,7 @@
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a000 0x400>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 6>;
+ clocks = <&ccu CLK_APB1_PS20>;
status = "disabled";
};
@@ -1554,7 +1007,7 @@
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a400 0x400>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 7>;
+ clocks = <&ccu CLK_APB1_PS21>;
status = "disabled";
};
@@ -1563,7 +1016,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 0>;
+ clocks = <&ccu CLK_APB1_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1574,7 +1027,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 1>;
+ clocks = <&ccu CLK_APB1_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1585,7 +1038,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 2>;
+ clocks = <&ccu CLK_APB1_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1596,7 +1049,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b800 0x400>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 3>;
+ clocks = <&ccu CLK_APB1_I2C3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1607,7 +1060,7 @@
"allwinner,sun4i-a10-can";
reg = <0x01c2bc00 0x400>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 4>;
+ clocks = <&ccu CLK_APB1_CAN>;
status = "disabled";
};
@@ -1616,7 +1069,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2c000 0x400>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 15>;
+ clocks = <&ccu CLK_APB1_I2C4>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1627,7 +1080,7 @@
reg = <0x01c50000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
- clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
+ clocks = <&ccu CLK_AHB_GMAC>, <&gmac_tx_clk>;
clock-names = "stmmaceth", "allwinner_gmac_tx";
snps,pbl = <2>;
snps,fixed-burst;
@@ -1644,7 +1097,7 @@
<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 28>;
+ clocks = <&ccu CLK_AHB_HSTIMER>;
};
gic: interrupt-controller@01c81000 {
@@ -1657,6 +1110,5 @@
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
-
};
};
--
git-series 0.9.1
^ permalink raw reply related
* [PATCH v3 5/5] ARM: sun4i: Convert to CCU
From: Priit Laes @ 2017-04-26 19:32 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA
Cc: Philipp Zabel, Russell King, Chen-Yu Tsai, Maxime Ripard,
Mark Rutland, Rob Herring, Stephen Boyd, Michael Turquette,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Priit Laes
In-Reply-To: <cover.908ce010a25e503bb5ad0967759c723219c6ed0d.1493235134.git-series.plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
Convert sun4i-a10.dtsi to new CCU driver.
Tested on Gemei G9 tablet.
Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 645 +++-----------------------------
1 file changed, 74 insertions(+), 571 deletions(-)
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index b63668e..feb104e 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -45,7 +45,8 @@
#include <dt-bindings/thermal/thermal.h>
-#include <dt-bindings/clock/sun4i-a10-pll2.h>
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
#include <dt-bindings/dma/sun4i-a10.h>
/ {
@@ -64,9 +65,9 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>, <&de_be0_clk>,
- <&tcon0_ch1_clk>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+ <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+ <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
@@ -74,10 +75,11 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
- clocks = <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>, <&ahb_gates 46>,
- <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>,
- <&dram_gates 25>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+ <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
+ <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>,
+ <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
@@ -85,9 +87,10 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0";
- clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>,
- <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>,
- <&dram_gates 25>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+ <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>,
+ <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH0>,
+ <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
@@ -95,11 +98,11 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
- clocks = <&ahb_gates 34>, <&ahb_gates 36>,
- <&ahb_gates 44>, <&ahb_gates 46>,
- <&de_be0_clk>, <&de_fe0_clk>,
- <&tcon0_ch1_clk>, <&dram_gates 5>,
- <&dram_gates 25>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+ <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
+ <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>,
+ <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
};
@@ -111,7 +114,7 @@
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0x0>;
- clocks = <&cpu>;
+ clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
@@ -167,18 +170,6 @@
#size-cells = <1>;
ranges;
- /*
- * This is a dummy clock, to be used as placeholder on
- * other mux clocks when a specific parent clock is not
- * yet implemented. It should be dropped when the driver
- * is complete.
- */
- dummy: dummy {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- };
-
osc24M: clk@01c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-osc-clk";
@@ -187,487 +178,12 @@
clock-output-names = "osc24M";
};
- osc3M: osc3M_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "osc3M";
- };
-
osc32k: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
};
-
- pll1: clk@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
- };
-
- pll2: clk@01c20008 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll2-clk";
- reg = <0x01c20008 0x8>;
- clocks = <&osc24M>;
- clock-output-names = "pll2-1x", "pll2-2x",
- "pll2-4x", "pll2-8x";
- };
-
- pll3: clk@01c20010 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20010 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll3";
- };
-
- pll3x2: pll3x2_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <2>;
- clocks = <&pll3>;
- clock-output-names = "pll3-2x";
- };
-
- pll4: clk@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
- };
-
- pll5: clk@01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
- pll6: clk@01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6";
- };
-
- pll7: clk@01c20030 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20030 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll7";
- };
-
- pll7x2: pll7x2_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <2>;
- clocks = <&pll7>;
- clock-output-names = "pll7-2x";
- };
-
- /* dummy is 200M */
- cpu: cpu@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
- clock-output-names = "cpu";
- };
-
- axi: axi@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
- };
-
- axi_gates: clk@01c2005c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-axi-gates-clk";
- reg = <0x01c2005c 0x4>;
- clocks = <&axi>;
- clock-indices = <0>;
- clock-output-names = "axi_dram";
- };
-
- ahb: ahb@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>;
- clock-output-names = "ahb";
- };
-
- ahb_gates: clk@01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb>;
- clock-indices = <0>, <1>,
- <2>, <3>,
- <4>, <5>, <6>,
- <7>, <8>, <9>,
- <10>, <11>, <12>,
- <13>, <14>, <16>,
- <17>, <18>, <20>,
- <21>, <22>, <23>,
- <24>, <25>, <26>,
- <32>, <33>, <34>,
- <35>, <36>, <37>,
- <40>, <41>, <43>,
- <44>, <45>,
- <46>, <47>,
- <50>, <52>;
- clock-output-names = "ahb_usb0", "ahb_ehci0",
- "ahb_ohci0", "ahb_ehci1",
- "ahb_ohci1", "ahb_ss", "ahb_dma",
- "ahb_bist", "ahb_mmc0", "ahb_mmc1",
- "ahb_mmc2", "ahb_mmc3", "ahb_ms",
- "ahb_nand", "ahb_sdram", "ahb_ace",
- "ahb_emac", "ahb_ts", "ahb_spi0",
- "ahb_spi1", "ahb_spi2", "ahb_spi3",
- "ahb_pata", "ahb_sata", "ahb_gps",
- "ahb_ve", "ahb_tvd", "ahb_tve0",
- "ahb_tve1", "ahb_lcd0", "ahb_lcd1",
- "ahb_csi0", "ahb_csi1", "ahb_hdmi",
- "ahb_de_be0", "ahb_de_be1",
- "ahb_de_fe0", "ahb_de_fe1",
- "ahb_mp", "ahb_mali400";
- };
-
- apb0: apb0@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
- };
-
- apb0_gates: clk@01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb0>;
- clock-indices = <0>, <1>,
- <2>, <3>,
- <5>, <6>,
- <7>, <10>;
- clock-output-names = "apb0_codec", "apb0_spdif",
- "apb0_ac97", "apb0_iis",
- "apb0_pio", "apb0_ir0",
- "apb0_ir1", "apb0_keypad";
- };
-
- apb1: clk@01c20058 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1";
- };
-
- apb1_gates: clk@01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb1>;
- clock-indices = <0>, <1>,
- <2>, <4>,
- <5>, <6>,
- <7>, <16>,
- <17>, <18>,
- <19>, <20>,
- <21>, <22>,
- <23>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
- "apb1_i2c2", "apb1_can",
- "apb1_scr", "apb1_ps20",
- "apb1_ps21", "apb1_uart0",
- "apb1_uart1", "apb1_uart2",
- "apb1_uart3", "apb1_uart4",
- "apb1_uart5", "apb1_uart6",
- "apb1_uart7";
- };
-
- nand_clk: clk@01c20080 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
- };
-
- ms_clk: clk@01c20084 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
- };
-
- mmc0_clk: clk@01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: clk@01c2008c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: clk@01c20090 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
- };
-
- mmc3_clk: clk@01c20094 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20094 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc3",
- "mmc3_output",
- "mmc3_sample";
- };
-
- ts_clk: clk@01c20098 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
- };
-
- ss_clk: clk@01c2009c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
- };
-
- spi0_clk: clk@01c200a0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
- };
-
- spi1_clk: clk@01c200a4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
- };
-
- spi2_clk: clk@01c200a8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
- };
-
- pata_clk: clk@01c200ac {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200ac 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "pata";
- };
-
- ir0_clk: clk@01c200b0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
- };
-
- ir1_clk: clk@01c200b4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir1";
- };
-
- spdif_clk: clk@01c200c0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200c0 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "spdif";
- };
-
- usb_clk: clk@01c200cc {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-usb-clk";
- reg = <0x01c200cc 0x4>;
- clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_ohci1",
- "usb_phy";
- };
-
- spi3_clk: clk@01c200d4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200d4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi3";
- };
-
- dram_gates: clk@01c20100 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-dram-gates-clk";
- reg = <0x01c20100 0x4>;
- clocks = <&pll5 0>;
- clock-indices = <0>,
- <1>, <2>,
- <3>,
- <4>,
- <5>, <6>,
- <15>,
- <24>, <25>,
- <26>, <27>,
- <28>, <29>;
- clock-output-names = "dram_ve",
- "dram_csi0", "dram_csi1",
- "dram_ts",
- "dram_tvd",
- "dram_tve0", "dram_tve1",
- "dram_output",
- "dram_de_fe1", "dram_de_fe0",
- "dram_de_be0", "dram_de_be1",
- "dram_de_mp", "dram_ace";
- };
-
- de_be0_clk: clk@01c20104 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20104 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be0";
- };
-
- de_be1_clk: clk@01c20108 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20108 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be1";
- };
-
- de_fe0_clk: clk@01c2010c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c2010c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe0";
- };
-
- de_fe1_clk: clk@01c20110 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20110 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe1";
- };
-
-
- tcon0_ch0_clk: clk@01c20118 {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c20118 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch0-sclk";
-
- };
-
- tcon1_ch0_clk: clk@01c2011c {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c2011c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch0-sclk";
-
- };
-
- tcon0_ch1_clk: clk@01c2012c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c2012c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch1-sclk";
-
- };
-
- tcon1_ch1_clk: clk@01c20130 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c20130 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch1-sclk";
-
- };
-
- ve_clk: clk@01c2013c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-ve-clk";
- reg = <0x01c2013c 0x4>;
- clocks = <&pll4>;
- clock-output-names = "ve";
- };
-
- codec_clk: clk@01c20140 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec-clk";
- reg = <0x01c20140 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "codec";
- };
};
soc@01c00000 {
@@ -716,7 +232,7 @@
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
interrupts = <27>;
- clocks = <&ahb_gates 6>;
+ clocks = <&ccu CLK_AHB_DMA>;
#dma-cells = <2>;
};
@@ -724,7 +240,7 @@
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <37>;
- clocks = <&ahb_gates 13>, <&nand_clk>;
+ clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 3>;
dma-names = "rxtx";
@@ -737,7 +253,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
interrupts = <10>;
- clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 27>,
<&dma SUN4I_DMA_DEDICATED 26>;
@@ -751,7 +267,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c06000 0x1000>;
interrupts = <11>;
- clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 9>,
<&dma SUN4I_DMA_DEDICATED 8>;
@@ -765,7 +281,7 @@
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
- clocks = <&ahb_gates 17>;
+ clocks = <&ccu CLK_AHB_EMAC>;
allwinner,sram = <&emac_sram 1>;
status = "disabled";
};
@@ -781,14 +297,8 @@
mmc0: mmc@01c0f000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c0f000 0x1000>;
- clocks = <&ahb_gates 8>,
- <&mmc0_clk 0>,
- <&mmc0_clk 1>,
- <&mmc0_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
interrupts = <32>;
status = "disabled";
#address-cells = <1>;
@@ -798,14 +308,8 @@
mmc1: mmc@01c10000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c10000 0x1000>;
- clocks = <&ahb_gates 9>,
- <&mmc1_clk 0>,
- <&mmc1_clk 1>,
- <&mmc1_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
interrupts = <33>;
status = "disabled";
#address-cells = <1>;
@@ -815,14 +319,8 @@
mmc2: mmc@01c11000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c11000 0x1000>;
- clocks = <&ahb_gates 10>,
- <&mmc2_clk 0>,
- <&mmc2_clk 1>,
- <&mmc2_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
interrupts = <34>;
status = "disabled";
#address-cells = <1>;
@@ -832,14 +330,8 @@
mmc3: mmc@01c12000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c12000 0x1000>;
- clocks = <&ahb_gates 11>,
- <&mmc3_clk 0>,
- <&mmc3_clk 1>,
- <&mmc3_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu CLK_AHB_MMC3>, <&ccu CLK_MMC3>;
+ clock-names = "ahb", "mmc";
interrupts = <35>;
status = "disabled";
#address-cells = <1>;
@@ -849,7 +341,7 @@
usb_otg: usb@01c13000 {
compatible = "allwinner,sun4i-a10-musb";
reg = <0x01c13000 0x0400>;
- clocks = <&ahb_gates 0>;
+ clocks = <&ccu CLK_AHB_OTG>;
interrupts = <38>;
interrupt-names = "mc";
phys = <&usbphy 0>;
@@ -864,9 +356,11 @@
compatible = "allwinner,sun4i-a10-usb-phy";
reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
reg-names = "phy_ctrl", "pmu1", "pmu2";
- clocks = <&usb_clk 8>;
+ clocks = <&ccu CLK_USB_PHY>;
clock-names = "usb_phy";
- resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>;
reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
status = "disabled";
};
@@ -875,7 +369,7 @@
compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <39>;
- clocks = <&ahb_gates 1>;
+ clocks = <&ccu CLK_AHB_EHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -885,7 +379,7 @@
compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <64>;
- clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -895,7 +389,7 @@
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <86>;
- clocks = <&ahb_gates 5>, <&ss_clk>;
+ clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
clock-names = "ahb", "mod";
};
@@ -903,7 +397,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
interrupts = <12>;
- clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 29>,
<&dma SUN4I_DMA_DEDICATED 28>;
@@ -917,7 +411,7 @@
compatible = "allwinner,sun4i-a10-ahci";
reg = <0x01c18000 0x1000>;
interrupts = <56>;
- clocks = <&pll6 0>, <&ahb_gates 25>;
+ clocks = <&ccu CLK_AHB_SATA>;
status = "disabled";
};
@@ -925,7 +419,7 @@
compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
interrupts = <40>;
- clocks = <&ahb_gates 3>;
+ clocks = <&ccu CLK_AHB_EHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@@ -935,7 +429,7 @@
compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <65>;
- clocks = <&usb_clk 7>, <&ahb_gates 4>;
+ clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@@ -945,7 +439,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
interrupts = <50>;
- clocks = <&ahb_gates 23>, <&spi3_clk>;
+ clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 31>,
<&dma SUN4I_DMA_DEDICATED 30>;
@@ -955,6 +449,15 @@
#size-cells = <0>;
};
+ ccu: clock@01c20000 {
+ compatible = "allwinner,sun4i-a10-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
intc: interrupt-controller@01c20400 {
compatible = "allwinner,sun4i-a10-ic";
reg = <0x01c20400 0x400>;
@@ -966,7 +469,7 @@
compatible = "allwinner,sun4i-a10-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <28>;
- clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
@@ -1149,7 +652,7 @@
compatible = "allwinner,sun4i-a10-spdif";
reg = <0x01c21000 0x400>;
interrupts = <13>;
- clocks = <&apb0_gates 1>, <&spdif_clk>;
+ clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
clock-names = "apb", "spdif";
dmas = <&dma SUN4I_DMA_NORMAL 2>,
<&dma SUN4I_DMA_NORMAL 2>;
@@ -1159,7 +662,7 @@
ir0: ir@01c21800 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 6>, <&ir0_clk>;
+ clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
clock-names = "apb", "ir";
interrupts = <5>;
reg = <0x01c21800 0x40>;
@@ -1168,7 +671,7 @@
ir1: ir@01c21c00 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 7>, <&ir1_clk>;
+ clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
clock-names = "apb", "ir";
interrupts = <6>;
reg = <0x01c21c00 0x40>;
@@ -1187,7 +690,7 @@
compatible = "allwinner,sun4i-a10-codec";
reg = <0x01c22c00 0x40>;
interrupts = <30>;
- clocks = <&apb0_gates 0>, <&codec_clk>;
+ clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
clock-names = "apb", "codec";
dmas = <&dma SUN4I_DMA_NORMAL 19>,
<&dma SUN4I_DMA_NORMAL 19>;
@@ -1213,7 +716,7 @@
interrupts = <1>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 16>;
+ clocks = <&ccu CLK_APB1_UART0>;
status = "disabled";
};
@@ -1223,7 +726,7 @@
interrupts = <2>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 17>;
+ clocks = <&ccu CLK_APB1_UART1>;
status = "disabled";
};
@@ -1233,7 +736,7 @@
interrupts = <3>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 18>;
+ clocks = <&ccu CLK_APB1_UART2>;
status = "disabled";
};
@@ -1243,7 +746,7 @@
interrupts = <4>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 19>;
+ clocks = <&ccu CLK_APB1_UART3>;
status = "disabled";
};
@@ -1253,7 +756,7 @@
interrupts = <17>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 20>;
+ clocks = <&ccu CLK_APB1_UART4>;
status = "disabled";
};
@@ -1263,7 +766,7 @@
interrupts = <18>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 21>;
+ clocks = <&ccu CLK_APB1_UART5>;
status = "disabled";
};
@@ -1273,7 +776,7 @@
interrupts = <19>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 22>;
+ clocks = <&ccu CLK_APB1_UART6>;
status = "disabled";
};
@@ -1283,7 +786,7 @@
interrupts = <20>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 23>;
+ clocks = <&ccu CLK_APB1_UART7>;
status = "disabled";
};
@@ -1291,7 +794,7 @@
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a000 0x400>;
interrupts = <62>;
- clocks = <&apb1_gates 6>;
+ clocks = <&ccu CLK_APB1_PS20>;
status = "disabled";
};
@@ -1299,7 +802,7 @@
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a400 0x400>;
interrupts = <63>;
- clocks = <&apb1_gates 7>;
+ clocks = <&ccu CLK_APB1_PS21>;
status = "disabled";
};
@@ -1307,7 +810,7 @@
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <7>;
- clocks = <&apb1_gates 0>;
+ clocks = <&ccu CLK_APB1_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1317,7 +820,7 @@
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <8>;
- clocks = <&apb1_gates 1>;
+ clocks = <&ccu CLK_APB1_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1327,7 +830,7 @@
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <9>;
- clocks = <&apb1_gates 2>;
+ clocks = <&ccu CLK_APB1_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1337,7 +840,7 @@
compatible = "allwinner,sun4i-a10-can";
reg = <0x01c2bc00 0x400>;
interrupts = <26>;
- clocks = <&apb1_gates 4>;
+ clocks = <&ccu CLK_APB1_CAN>;
status = "disabled";
};
};
--
git-series 0.9.1
^ permalink raw reply related
* [PATCH 1/9] usb: host: add DT bindings for faraday fotg2
From: Hans Ulli Kroll @ 2017-04-26 19:41 UTC (permalink / raw)
To: Linus Walleij
Cc: Hans Ulli Kroll, devicetree-u79uwXL29TY76Z2rM5mHXA, Linus Walleij
In-Reply-To: <20170426194120.26304-1-ulli.kroll-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
This adds device tree bindings for the Faraday FOTG2
dual-mode host controller.
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Signed-off-by: Hans Ulli Kroll <ulli.kroll-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
Signed-off-by: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
.../devicetree/bindings/usb/faraday,fotg210.txt | 40 ++++++++++++++++++++++
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/faraday,fotg210.txt
diff --git a/Documentation/devicetree/bindings/usb/faraday,fotg210.txt b/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
new file mode 100644
index 000000000000..dc2cdaf20d9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
@@ -0,0 +1,40 @@
+Faraday FOTG Dual role controller
+
+This OTG-capable host/device mode USB controller is found in Cortina Systems
+Gemini and other SoC products.
+On Gemini currently host mode is used
+
+Required properties:
+- compatible: should be one of:
+ "faraday,fotg210-dr"
+ "cortina,gemini-usb", "faraday,fotg210-dr"
+- reg: should contain one register range i.e. start and length
+- interrupts: description of the interrupt line
+
+Optional properties:
+- clocks: should contain the IP block clock
+- clock-names: should be "PCLK" for the IP block clock
+- dr_mode : indicates the working mode for "faraday,fotg210-dr" compatible
+ controllers. Can be "host" or "peripheral"
+ Default to "host" if not defined for backward compatibility.
+
+
+Required properties for "cortina,gemini-usb" compatible:
+- syscon: a phandle to the system controller to access PHY registers
+
+Optional properties for "cortina,gemini-usb" compatible:
+- cortina,gemini-mini-b: boolean property that indicates that a Mini-B
+ OTH connector is in use
+- wakeup-source: see power/wakeup-source.txt
+
+Example for Gemini:
+
+usb@68000000 {
+ compatible = "cortina,gemini-usb", "faraday,fotg210-dr";
+ reg = <0x68000000 0x1000>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cc 12>;
+ clock-names = "PCLK";
+ syscon = <&syscon>;
+ wakeup-source;
+};
--
2.12.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* Re: [PATCH v9 07/16] mmc: sdhci-msm: Add get_min_clock() and get_max_clock() callback
From: Andy Gross @ 2017-04-26 21:44 UTC (permalink / raw)
To: Ritesh Harjani
Cc: ulf.hansson, linux-mmc, adrian.hunter, sboyd, shawn.lin,
devicetree, linux-clk, david.brown, linux-arm-msm, georgi.djakov,
alex.lemberg, mateusz.nowak, Yuliy.Izrailov, asutoshd,
david.griego, stummala, venkatg, rnayak, pramod.gurav, jeremymc,
stable
In-Reply-To: <1479710246-26676-8-git-send-email-riteshh@codeaurora.org>
On Mon, Nov 21, 2016 at 12:07:17PM +0530, Ritesh Harjani wrote:
> This add get_min_clock() and get_max_clock() callback
> for sdhci-msm. sdhci-msm min/max clocks may be different
> hence implement these callbacks.
>
> Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
> Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
> Acked-by: Adrian Hunter <adrian.hunter@intel.com>
This patch needs to be picked up for stable as 4.9 is currently broken w.r.t.
MMC on Qualcomm platforms.
Fixes: d84be51d1c1d ("mmc: sdhci-msm: Enable few quirks")
Regards,
Andy Gross
^ permalink raw reply
* [PATCH 1/2] wcn36xx: Pass used skb to ieee80211_tx_status()
From: Bjorn Andersson @ 2017-04-26 22:04 UTC (permalink / raw)
To: Eugene Krasnikov, Kalle Valo
Cc: Andy Gross, David Brown, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-soc-u79uwXL29TY76Z2rM5mHXA,
linux-wireless-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA,
wcn36xx-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Nicolas Dechesne
As the tx skbs are collected they should be passed to
ieee80211_tx_status() rather than ieee80211_free_txskb(), as the prior
will take care of monitoring and LED triggers while the latter will
consider the skb dropped.
Signed-off-by: Bjorn Andersson <bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
drivers/net/wireless/ath/wcn36xx/dxe.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c
index 87dfdaf9044c..938b7bd733cf 100644
--- a/drivers/net/wireless/ath/wcn36xx/dxe.c
+++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
@@ -371,7 +371,7 @@ static void reap_tx_dxes(struct wcn36xx *wcn, struct wcn36xx_dxe_ch *ch)
info = IEEE80211_SKB_CB(ctl->skb);
if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS)) {
/* Keep frame until TX status comes */
- ieee80211_free_txskb(wcn->hw, ctl->skb);
+ ieee80211_tx_status(wcn->hw, ctl->skb);
}
spin_lock(&ctl->skb_lock);
if (wcn->queues_stopped) {
--
2.12.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH 2/2] arm64: dts: apq8016-sbc: Correct WLAN LED default-trigger
From: Bjorn Andersson @ 2017-04-26 22:04 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: devicetree, linux-arm-msm, linux-wireless, linux-kernel,
Kalle Valo, netdev, Nicolas Dechesne, wcn36xx, linux-soc,
Eugene Krasnikov, linux-arm-kernel
In-Reply-To: <20170426220444.10539-1-bjorn.andersson@linaro.org>
The TX status trigger of the wlan interface is named phy0tx, so this
updates the default-trigger for the WLAN LED to use that instead.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Note that without patch 1/2 this trigger does not fire - but there's also no
harm in picking the two patches through separate trees.
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 5d83b02b7c4a..21a8f5ce8955 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -178,7 +178,7 @@
led@5 {
label = "apq8016-sbc:yellow:wlan";
gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "wlan";
+ linux,default-trigger = "phy0tx";
default-state = "off";
};
--
2.12.0
^ permalink raw reply related
* Re: [PATCH v5 0/9] NFC: trf7970a: Fixups & convert to desc-based GPIO
From: Samuel Ortiz @ 2017-04-26 22:09 UTC (permalink / raw)
To: Mark Greer
Cc: linux-wireless-u79uwXL29TY76Z2rM5mHXA,
linux-nfc-hn68Rpc1hR1g9hUCZPvPmw,
devicetree-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <20170425224356.11498-1-mgreer-luAo+O/VEmrlveNOaEYElw@public.gmane.org>
Hi Mark,
On Tue, Apr 25, 2017 at 03:43:47PM -0700, Mark Greer wrote:
> These trf7970a driver patches do the following things:
> - add Mark Greer as the maintainer of the trf7970a driver
> - some minor fixups
> - remove support for 'vin-voltage-override' DT property
> - change the DTS example to indicate that EN and EN2 are active high GPIOs
> - convert the driver to use the descriptor-based GPIO interface
> - apply Lindent coding style fixes
>
> Based on nfc-next/master 4ea206395d3a ("nfc: fix get_unaligned_...() misuses")
>
> v4->v5:
> - Fixed whitespace issue in "NFC: trf7970a: Clean up coding style issues"
>
> v3->v4:
> - Rebased on nfc-next/master because patches in that branch conflict
> with the v3 version of this patch series.
> - Removed "NFC: trf7970a: Don't manage EN2 when not specified in DT"
> because a similar patch has already been accepted.
> - Added "NFC: trf7970a: Clean up coding style issues" because the reason
> I removed it in v3 no longer exists.
> - Reordered the patches to make more sense (I think)
>
> v2->v3:
> - Removed "[PATCH v2 5/7] NFC: trf7970a: Clean up coding style issues"
> because it will make merging patches from Geoff Lansberry and others
> hard to apply. I will resubmit once those patches have been merged
> or rejected.
> - Added a patch to remove 'vin-voltage-override' DT property support as
> proper DT regulator set up makes it unnecessary.
>
> v1->v2:
> - Commit description fixups only; no functional changes.
>
> Mark Greer (9):
> MAINTAINERS: NFC: trf7970a: Add Mark Greer as maintainer
> NFC: trf7970a: Don't de-assert EN2 unless it was asserted
> NFC: trf7970a: Fix inaccurate comment in trf7970a_probe()
> NFC: trf7970a: Only check 'en2-rf-quirk' if EN2 is specified
> NFC: trf7970a: Remove useless comment
> NFC: trf7970a: Remove support for 'vin-voltage-override' DT property
> NFC: trf7970a: Enable pins are active high not active low
> NFC: trf7970a: Convert to descriptor based GPIO interface
> NFC: trf7970a: Clean up coding style issues
All patches applied to nfc-next, thanks.
Cheers,
Samuel.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [RESEND PATCH 1/2] arc: axs10x: Add DT bindings for I2S audio playback
From: Vineet Gupta @ 2017-04-26 23:31 UTC (permalink / raw)
To: Jose Abreu,
linux-snps-arc-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Carlos Palminha, Alexey Brodkin, Rob Herring,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
In-Reply-To: <c02ea9db-db90-1b2e-1baf-f2940e64201f-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
On 04/26/2017 01:55 AM, Jose Abreu wrote:
> Hi Vineet,
>
>
> On 24-04-2017 18:36, Vineet Gupta wrote:
>> On 04/21/2017 03:15 AM, Jose Abreu wrote:
>>> This patch adds the necessary DT bindings to get HDMI audio
>>> output in ARC AXS10x SDP. The bindings for I2S controller were
>>> added as well as the bindings for simple audio card.
>> Are these waiting on Rob or is it OK for me to pick these up for 4.12 ?
> Yes, I was waiting for Rob ack but he has been silent. It would
> be nice if these went for 4.12.
Ok lets wait another couple of days before I pick those up.
In the mean time, can you please restest the series against 4.11-rcX and report
here that patches are still valid and do as intended !
Thx,
-Vineet
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v3 2/2] Input: add support for the STMicroelectronics FingerTip touchscreen
From: Dmitry Torokhov @ 2017-04-27 0:39 UTC (permalink / raw)
To: Andi Shyti
Cc: Rob Herring, Javier Martinez Canillas, Andrzej Hajda,
Chanwoo Choi, linux-input-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Andi Shyti
In-Reply-To: <20170327130743.27783-3-andi.shyti-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Hi Andi,
Quick question:
On Mon, Mar 27, 2017 at 10:07:43PM +0900, Andi Shyti wrote:
> +static irqreturn_t stmfts_irq_handler(int irq, void *dev)
> +{
> + struct stmfts_data *sdata = dev;
> + int ret;
> +
> + mutex_lock(&sdata->mutex);
> + ret = i2c_smbus_read_i2c_block_data(sdata->client,
> + STMFTS_READ_ONE_EVENT,
> + STMFTS_EVENT_SIZE, sdata->data);
> +
> + if (ret < 0 || ret != STMFTS_EVENT_SIZE)
> + goto exit;
Why do we split read into 2 chunks? Can we issue STMFTS_READ_ALL_EVENT
right away instead of reading first event, analyzing it, and then (maybe)
fetching the rest?
Also, why do we use smbus protocol for the first event and i2c for the
rest?
Thanks.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH v2] NFC: trf7970a: Correct register settings for 27MHz clock
From: Geoff Lansberry @ 2017-04-27 1:41 UTC (permalink / raw)
To: linux-wireless, sameo
Cc: kernel-janitors, linux-kernel, linux-nfc, devicetree, mgreer,
justin, colin.king, wharms, Geoff Lansberry
In prior commits the selected clock frequency does not propagate
correctly to what is written the the TRF7970A_MODULATOR_SYS_CLK_CTRL
register.
Signed-off-by: Geoff Lansberry <geoff@kuvee.com>
---
drivers/nfc/trf7970a.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c
index 5f040e6..c278b0e 100644
--- a/drivers/nfc/trf7970a.c
+++ b/drivers/nfc/trf7970a.c
@@ -2079,6 +2079,13 @@ static int trf7970a_probe(struct spi_device *spi)
return -EINVAL;
}
+ if (clk_freq == TRF7970A_27MHZ_CLOCK_FREQUENCY) {
+ trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_27MHZ;
+ dev_dbg(trf->dev, "trf7970a configured for 27MHz crystal\n");
+ } else {
+ trf->modulator_sys_clk_ctrl = 0;
+ }
+
if (of_property_read_bool(np, "en2-rf-quirk"))
trf->quirks |= TRF7970A_QUIRK_EN2_MUST_STAY_LOW;
--
2.7.4
^ permalink raw reply related
* [PATCH v7 0/9][resend] ASoC: add OF-graph base simple-card
From: Kuninori Morimoto @ 2017-04-27 1:59 UTC (permalink / raw)
To: Mark Brown, Rob Herring; +Cc: Linux-ALSA, Simon, Linux-DT
Hi Mark, Rob
These are resend of v7 of OF-graph sound card support.
I posted because Japan will have long holiday from tomorrow
1) - 4) : OF-graph base functions
5) - 9) : OF-graph + simple-card (= audio_graph_card)
Kuninori Morimoto (9):
of-graph: export symbol of_phandle_iterator_init/next
of_graph: add of_graph_get_remote_endpoint()
of_graph: add of_graph_get_port_parent()
of_graph: add of_graph_get_endpoint_count()
ASoC: soc-core: enable "dai-format" on snd_soc_of_parse_daifmt()
ASoC: simple-card-utils: enable "label" on asoc_simple_card_parse_card_name
ASoC: simple-card-utils: add asoc_simple_card_parse_graph_dai()
ASoC: add audio-graph-card document
ASoC: add audio-graph-card support
.../devicetree/bindings/sound/audio-graph-card.txt | 124 +++++++++
drivers/of/base.c | 62 ++++-
include/linux/of_graph.h | 21 ++
include/sound/simple_card_utils.h | 10 +
sound/soc/generic/Kconfig | 8 +
sound/soc/generic/Makefile | 2 +
sound/soc/generic/audio-graph-card.c | 308 +++++++++++++++++++++
sound/soc/generic/simple-card-utils.c | 73 ++++-
sound/soc/soc-core.c | 10 +-
9 files changed, 600 insertions(+), 18 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt
create mode 100644 sound/soc/generic/audio-graph-card.c
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH v7 1/9][resend] of-graph: export symbol of_phandle_iterator_init/next
From: Kuninori Morimoto @ 2017-04-27 2:01 UTC (permalink / raw)
To: Mark Brown, Rob Herring; +Cc: Linux-ALSA, Simon, Linux-DT
In-Reply-To: <871ssesjgn.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
From: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
of_for_each_phandle() uses of_phandle_iterator_init/next
but it isn't exported. So kernel module complile will say
ERROR: "of_phandle_iterator_init" [xxx.ko] undefined!
ERROR: "of_phandle_iterator_next" [xxx.ko] undefined!
This patch solved this issue
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
v6 -> v7
- no change
drivers/of/base.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/of/base.c b/drivers/of/base.c
index d7c4629..d9adaa9 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1570,6 +1570,7 @@ int of_phandle_iterator_init(struct of_phandle_iterator *it,
return 0;
}
+EXPORT_SYMBOL_GPL(of_phandle_iterator_init);
int of_phandle_iterator_next(struct of_phandle_iterator *it)
{
@@ -1639,6 +1640,7 @@ int of_phandle_iterator_next(struct of_phandle_iterator *it)
return -EINVAL;
}
+EXPORT_SYMBOL_GPL(of_phandle_iterator_next);
int of_phandle_iterator_args(struct of_phandle_iterator *it,
uint32_t *args,
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v7 2/9][resend] of_graph: add of_graph_get_remote_endpoint()
From: Kuninori Morimoto @ 2017-04-27 2:01 UTC (permalink / raw)
To: Mark Brown, Rob Herring; +Cc: Linux-ALSA, Simon, Linux-DT
In-Reply-To: <871ssesjgn.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
From: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
It should use same method to get same result.
To getting remote-endpoint node,
let's use of_graph_get_remote_endpoint()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
---
v6 -> v7
- no change
drivers/of/base.c | 18 ++++++++++++++++--
include/linux/of_graph.h | 8 ++++++++
2 files changed, 24 insertions(+), 2 deletions(-)
diff --git a/drivers/of/base.c b/drivers/of/base.c
index d9adaa9..1ae2510 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -2457,6 +2457,20 @@ struct device_node *of_graph_get_endpoint_by_regs(
EXPORT_SYMBOL(of_graph_get_endpoint_by_regs);
/**
+ * of_graph_get_remote_endpoint() - get remote endpoint node
+ * @node: pointer to a local endpoint device_node
+ *
+ * Return: Remote endpoint node associated with remote endpoint node linked
+ * to @node. Use of_node_put() on it when done.
+ */
+struct device_node *of_graph_get_remote_endpoint(const struct device_node *node)
+{
+ /* Get remote endpoint node. */
+ return of_parse_phandle(node, "remote-endpoint", 0);
+}
+EXPORT_SYMBOL(of_graph_get_remote_endpoint);
+
+/**
* of_graph_get_remote_port_parent() - get remote port's parent node
* @node: pointer to a local endpoint device_node
*
@@ -2470,7 +2484,7 @@ struct device_node *of_graph_get_remote_port_parent(
unsigned int depth;
/* Get remote endpoint node. */
- np = of_parse_phandle(node, "remote-endpoint", 0);
+ np = of_graph_get_remote_endpoint(node);
/* Walk 3 levels up only if there is 'ports' node. */
for (depth = 3; depth && np; depth--) {
@@ -2494,7 +2508,7 @@ struct device_node *of_graph_get_remote_port(const struct device_node *node)
struct device_node *np;
/* Get remote endpoint node. */
- np = of_parse_phandle(node, "remote-endpoint", 0);
+ np = of_graph_get_remote_endpoint(node);
if (!np)
return NULL;
return of_get_next_parent(np);
diff --git a/include/linux/of_graph.h b/include/linux/of_graph.h
index abdb02e..0c9473a 100644
--- a/include/linux/of_graph.h
+++ b/include/linux/of_graph.h
@@ -48,6 +48,8 @@ struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
struct device_node *previous);
struct device_node *of_graph_get_endpoint_by_regs(
const struct device_node *parent, int port_reg, int reg);
+struct device_node *of_graph_get_remote_endpoint(
+ const struct device_node *node);
struct device_node *of_graph_get_remote_port_parent(
const struct device_node *node);
struct device_node *of_graph_get_remote_port(const struct device_node *node);
@@ -80,6 +82,12 @@ static inline struct device_node *of_graph_get_endpoint_by_regs(
return NULL;
}
+static inline struct device_node *of_graph_get_remote_endpoint(
+ const struct device_node *node)
+{
+ return NULL;
+}
+
static inline struct device_node *of_graph_get_remote_port_parent(
const struct device_node *node)
{
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v7 3/9][resend] of_graph: add of_graph_get_port_parent()
From: Kuninori Morimoto @ 2017-04-27 2:02 UTC (permalink / raw)
To: Mark Brown, Rob Herring; +Cc: Linux-ALSA, Simon, Linux-DT
In-Reply-To: <871ssesjgn.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
From: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Linux kernel already has of_graph_get_remote_port_parent(),
but, sometimes we want to get own port parent.
This patch adds of_graph_get_port_parent()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
---
v6 -> v7
- no change
drivers/of/base.c | 30 ++++++++++++++++++++++--------
include/linux/of_graph.h | 7 +++++++
2 files changed, 29 insertions(+), 8 deletions(-)
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 1ae2510..acda15b 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -2471,6 +2471,27 @@ struct device_node *of_graph_get_remote_endpoint(const struct device_node *node)
EXPORT_SYMBOL(of_graph_get_remote_endpoint);
/**
+ * of_graph_get_port_parent() - get port's parent node
+ * @node: pointer to a local endpoint device_node
+ *
+ * Return: device node associated with endpoint node linked
+ * to @node. Use of_node_put() on it when done.
+ */
+struct device_node *of_graph_get_port_parent(struct device_node *node)
+{
+ unsigned int depth;
+
+ /* Walk 3 levels up only if there is 'ports' node. */
+ for (depth = 3; depth && node; depth--) {
+ node = of_get_next_parent(node);
+ if (depth == 2 && of_node_cmp(node->name, "ports"))
+ break;
+ }
+ return node;
+}
+EXPORT_SYMBOL(of_graph_get_port_parent);
+
+/**
* of_graph_get_remote_port_parent() - get remote port's parent node
* @node: pointer to a local endpoint device_node
*
@@ -2481,18 +2502,11 @@ struct device_node *of_graph_get_remote_port_parent(
const struct device_node *node)
{
struct device_node *np;
- unsigned int depth;
/* Get remote endpoint node. */
np = of_graph_get_remote_endpoint(node);
- /* Walk 3 levels up only if there is 'ports' node. */
- for (depth = 3; depth && np; depth--) {
- np = of_get_next_parent(np);
- if (depth == 2 && of_node_cmp(np->name, "ports"))
- break;
- }
- return np;
+ return of_graph_get_port_parent(np);
}
EXPORT_SYMBOL(of_graph_get_remote_port_parent);
diff --git a/include/linux/of_graph.h b/include/linux/of_graph.h
index 0c9473a..9db632d 100644
--- a/include/linux/of_graph.h
+++ b/include/linux/of_graph.h
@@ -50,6 +50,7 @@ struct device_node *of_graph_get_endpoint_by_regs(
const struct device_node *parent, int port_reg, int reg);
struct device_node *of_graph_get_remote_endpoint(
const struct device_node *node);
+struct device_node *of_graph_get_port_parent(struct device_node *node);
struct device_node *of_graph_get_remote_port_parent(
const struct device_node *node);
struct device_node *of_graph_get_remote_port(const struct device_node *node);
@@ -88,6 +89,12 @@ static inline struct device_node *of_graph_get_remote_endpoint(
return NULL;
}
+static inline struct device_node *of_graph_get_port_parent(
+ struct device_node *node)
+{
+ return NULL;
+}
+
static inline struct device_node *of_graph_get_remote_port_parent(
const struct device_node *node)
{
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v7 4/9][resend] of_graph: add of_graph_get_endpoint_count()
From: Kuninori Morimoto @ 2017-04-27 2:02 UTC (permalink / raw)
To: Mark Brown, Rob Herring; +Cc: Linux-ALSA, Simon, Linux-DT
In-Reply-To: <871ssesjgn.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
From: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
OF graph want to count its endpoint number, same as
of_get_child_count(). This patch adds of_graph_get_endpoint_count()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
---
v6 -> v7
- no change
drivers/of/base.c | 12 ++++++++++++
include/linux/of_graph.h | 6 ++++++
2 files changed, 18 insertions(+)
diff --git a/drivers/of/base.c b/drivers/of/base.c
index acda15b..bc42f91 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -2529,6 +2529,18 @@ struct device_node *of_graph_get_remote_port(const struct device_node *node)
}
EXPORT_SYMBOL(of_graph_get_remote_port);
+int of_graph_get_endpoint_count(const struct device_node *np)
+{
+ struct device_node *endpoint;
+ int num = 0;
+
+ for_each_endpoint_of_node(np, endpoint)
+ num++;
+
+ return num;
+}
+EXPORT_SYMBOL(of_graph_get_endpoint_count);
+
/**
* of_graph_get_remote_node() - get remote parent device_node for given port/endpoint
* @node: pointer to parent device_node containing graph port/endpoint
diff --git a/include/linux/of_graph.h b/include/linux/of_graph.h
index 9db632d..3e058f0 100644
--- a/include/linux/of_graph.h
+++ b/include/linux/of_graph.h
@@ -43,6 +43,7 @@ struct of_endpoint {
#ifdef CONFIG_OF
int of_graph_parse_endpoint(const struct device_node *node,
struct of_endpoint *endpoint);
+int of_graph_get_endpoint_count(const struct device_node *np);
struct device_node *of_graph_get_port_by_id(struct device_node *node, u32 id);
struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
struct device_node *previous);
@@ -64,6 +65,11 @@ static inline int of_graph_parse_endpoint(const struct device_node *node,
return -ENOSYS;
}
+static inline int of_graph_get_endpoint_count(const struct device_node *np)
+{
+ return 0;
+}
+
static inline struct device_node *of_graph_get_port_by_id(
struct device_node *node, u32 id)
{
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v7 5/9][resend] ASoC: soc-core: enable "dai-format" on snd_soc_of_parse_daifmt()
From: Kuninori Morimoto @ 2017-04-27 2:02 UTC (permalink / raw)
To: Mark Brown, Rob Herring; +Cc: Linux-ALSA, Simon, Linux-DT
In-Reply-To: <871ssesjgn.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
From: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Current snd_soc_of_parse_daifmt() detects [prefix]format, but
"format" was unclear in some case. This patch checks "dai-format"
first, and try to check "[prefix]format" if "dai-format" was not
exist.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
---
v6 -> v7
- no change
sound/soc/soc-core.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 8be2ce1..e84a820 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -3955,11 +3955,15 @@ unsigned int snd_soc_of_parse_daifmt(struct device_node *np,
prefix = "";
/*
- * check "[prefix]format = xxx"
+ * check "dai-format = xxx"
+ * or "[prefix]format = xxx"
* SND_SOC_DAIFMT_FORMAT_MASK area
*/
- snprintf(prop, sizeof(prop), "%sformat", prefix);
- ret = of_property_read_string(np, prop, &str);
+ ret = of_property_read_string(np, "dai-format", &str);
+ if (ret < 0) {
+ snprintf(prop, sizeof(prop), "%sformat", prefix);
+ ret = of_property_read_string(np, prop, &str);
+ }
if (ret == 0) {
for (i = 0; i < ARRAY_SIZE(of_fmt_table); i++) {
if (strcmp(str, of_fmt_table[i].name) == 0) {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v7 6/9][resend] ASoC: simple-card-utils: enable "label" on asoc_simple_card_parse_card_name
From: Kuninori Morimoto @ 2017-04-27 2:02 UTC (permalink / raw)
To: Mark Brown, Rob Herring; +Cc: Linux-ALSA, Simon, Linux-DT
In-Reply-To: <871ssesjgn.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
From: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Current asoc_simple_card_parse_card_name() detects [prefix]name,
but in generally, we uses "label" for user visible names.
This patch enables it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
---
v6 -> v7
- don't allow "[prefix]label"
sound/soc/generic/simple-card-utils.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c
index 343b291..c5ab8ad 100644
--- a/sound/soc/generic/simple-card-utils.c
+++ b/sound/soc/generic/simple-card-utils.c
@@ -81,15 +81,21 @@ int asoc_simple_card_set_dailink_name(struct device *dev,
int asoc_simple_card_parse_card_name(struct snd_soc_card *card,
char *prefix)
{
- char prop[128];
int ret;
- snprintf(prop, sizeof(prop), "%sname", prefix);
+ if (!prefix)
+ prefix = "";
/* Parse the card name from DT */
- ret = snd_soc_of_parse_card_name(card, prop);
- if (ret < 0)
- return ret;
+ ret = snd_soc_of_parse_card_name(card, "label");
+ if (ret < 0) {
+ char prop[128];
+
+ snprintf(prop, sizeof(prop), "%sname", prefix);
+ ret = snd_soc_of_parse_card_name(card, prop);
+ if (ret < 0)
+ return ret;
+ }
if (!card->name && card->dai_link)
card->name = card->dai_link->name;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v7 7/9][resend] ASoC: simple-card-utils: add asoc_simple_card_parse_graph_dai()
From: Kuninori Morimoto @ 2017-04-27 2:03 UTC (permalink / raw)
To: Mark Brown, Rob Herring; +Cc: Linux-ALSA, Simon, Linux-DT
In-Reply-To: <871ssesjgn.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
From: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
simple-card already has asoc_simple_card_parse_dai(),
but graph base parsing needs graph specific version of it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
---
v6 -> v7
- no change
include/sound/simple_card_utils.h | 10 ++++++
sound/soc/generic/simple-card-utils.c | 57 +++++++++++++++++++++++++++++++++++
2 files changed, 67 insertions(+)
diff --git a/include/sound/simple_card_utils.h b/include/sound/simple_card_utils.h
index af58d23..efab584 100644
--- a/include/sound/simple_card_utils.h
+++ b/include/sound/simple_card_utils.h
@@ -60,6 +60,16 @@ int asoc_simple_card_parse_dai(struct device_node *node,
const char *cells_name,
int *is_single_links);
+#define asoc_simple_card_parse_graph_cpu(ep, dai_link) \
+ asoc_simple_card_parse_graph_dai(ep, &dai_link->cpu_of_node, \
+ &dai_link->cpu_dai_name)
+#define asoc_simple_card_parse_graph_codec(ep, dai_link) \
+ asoc_simple_card_parse_graph_dai(ep, &dai_link->codec_of_node, \
+ &dai_link->codec_dai_name)
+int asoc_simple_card_parse_graph_dai(struct device_node *ep,
+ struct device_node **endpoint_np,
+ const char **dai_name);
+
int asoc_simple_card_init_dai(struct snd_soc_dai *dai,
struct asoc_simple_dai *simple_dai);
diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c
index c5ab8ad..5a3d51e 100644
--- a/sound/soc/generic/simple-card-utils.c
+++ b/sound/soc/generic/simple-card-utils.c
@@ -10,6 +10,7 @@
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_graph.h>
#include <sound/simple_card_utils.h>
int asoc_simple_card_parse_daifmt(struct device *dev,
@@ -171,6 +172,62 @@ int asoc_simple_card_parse_dai(struct device_node *node,
}
EXPORT_SYMBOL_GPL(asoc_simple_card_parse_dai);
+static int asoc_simple_card_get_dai_id(struct device_node *ep)
+{
+ struct device_node *node;
+ struct device_node *endpoint;
+ int i, id;
+
+ node = of_graph_get_port_parent(ep);
+
+ i = 0;
+ id = -1;
+ for_each_endpoint_of_node(node, endpoint) {
+ if (endpoint == ep)
+ id = i;
+ i++;
+ }
+ if (id < 0)
+ return -ENODEV;
+
+ return id;
+}
+
+int asoc_simple_card_parse_graph_dai(struct device_node *ep,
+ struct device_node **dai_of_node,
+ const char **dai_name)
+{
+ struct device_node *node;
+ struct of_phandle_args args;
+ int ret;
+
+ if (!ep)
+ return 0;
+ if (!dai_name)
+ return 0;
+
+ /*
+ * of_graph_get_port_parent() will call
+ * of_node_put(). So, call of_node_get() here
+ */
+ of_node_get(ep);
+ node = of_graph_get_port_parent(ep);
+
+ /* Get dai->name */
+ args.np = node;
+ args.args[0] = asoc_simple_card_get_dai_id(ep);
+ args.args_count = (of_graph_get_endpoint_count(node) > 1);
+
+ ret = snd_soc_get_dai_name(&args, dai_name);
+ if (ret < 0)
+ return ret;
+
+ *dai_of_node = node;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(asoc_simple_card_parse_graph_dai);
+
int asoc_simple_card_init_dai(struct snd_soc_dai *dai,
struct asoc_simple_dai *simple_dai)
{
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v7 8/9][resend] ASoC: add audio-graph-card document
From: Kuninori Morimoto @ 2017-04-27 2:03 UTC (permalink / raw)
To: Mark Brown, Rob Herring; +Cc: Linux-ALSA, Simon, Linux-DT
In-Reply-To: <871ssesjgn.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
From: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
"Audio Graph Card" = "Simple Card" + "OF-graph"
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Reviewed-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
v6 -> v7
- no change
.../devicetree/bindings/sound/audio-graph-card.txt | 124 +++++++++++++++++++++
1 file changed, 124 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
new file mode 100644
index 0000000..bac4b1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
@@ -0,0 +1,124 @@
+Audio Graph Card:
+
+Audio Graph Card specifies audio DAI connections of SoC <-> codec.
+It is based on common bindings for device graphs.
+see ${LINUX}/Documentation/devicetree/bindings/graph.txt
+
+Basically, Audio Graph Card property is same as Simple Card.
+see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt
+
+Below are same as Simple-Card.
+
+- label
+- dai-format
+- frame-master
+- bitclock-master
+- bitclock-inversion
+- frame-inversion
+- dai-tdm-slot-num
+- dai-tdm-slot-width
+- clocks / system-clock-frequency
+
+Required properties:
+
+- compatible : "audio-graph-card";
+- dais : list of CPU DAI port{s}
+
+Example: Single DAI case
+
+ sound_card {
+ compatible = "audio-graph-card";
+
+ dais = <&cpu_port>;
+ };
+
+ dai-controller {
+ ...
+ cpu_port: port {
+ cpu_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+
+ dai-format = "left_j";
+ ...
+ };
+ };
+ };
+
+ audio-codec {
+ ...
+ port {
+ codec_endpoint: endpoint {
+ remote-endpoint = <&cpu_endpoint>;
+ };
+ };
+ };
+
+Example: Multi DAI case
+
+ sound-card {
+ compatible = "audio-graph-card";
+
+ label = "sound-card";
+
+ dais = <&cpu_port0
+ &cpu_port1
+ &cpu_port2>;
+ };
+
+ audio-codec@0 {
+ ...
+ port {
+ codec0_endpoint: endpoint {
+ remote-endpoint = <&cpu_endpoint0>;
+ };
+ };
+ };
+
+ audio-codec@1 {
+ ...
+ port {
+ codec1_endpoint: endpoint {
+ remote-endpoint = <&cpu_endpoint1>;
+ };
+ };
+ };
+
+ audio-codec@2 {
+ ...
+ port {
+ codec2_endpoint: endpoint {
+ remote-endpoint = <&cpu_endpoint2>;
+ };
+ };
+ };
+
+ dai-controller {
+ ...
+ ports {
+ cpu_port0: port@0 {
+ cpu_endpoint0: endpoint {
+ remote-endpoint = <&codec0_endpoint>;
+
+ dai-format = "left_j";
+ ...
+ };
+ };
+ cpu_port1: port@1 {
+ cpu_endpoint1: endpoint {
+ remote-endpoint = <&codec1_endpoint>;
+
+ dai-format = "i2s";
+ ...
+ };
+ };
+ cpu_port2: port@2 {
+ cpu_endpoint2: endpoint {
+ remote-endpoint = <&codec2_endpoint>;
+
+ dai-format = "i2s";
+ ...
+ };
+ };
+ };
+ };
+
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox