* Re: [PATCHv2 1/3] dt-bindings: display: Intel FPGA VIP drm driver Devicetree bindings
From: Rob Herring @ 2017-04-28 18:32 UTC (permalink / raw)
To: hean.loong.ong
Cc: devicetree, tien.hock.loh, dri-devel, dinguyen, daniel.vetter,
Ong
In-Reply-To: <1493086006-4392-2-git-send-email-hean.loong.ong@intel.com>
On Tue, Apr 25, 2017 at 10:06:44AM +0800, hean.loong.ong@intel.com wrote:
> From: "Ong, Hean Loong" <hean.loong.ong@intel.com>
>
> Device tree binding for Intel FPGA Video and Image
> Processing Suite. The binding involved would be generated
> from the Altera (Intel) Qsys system. The bindings would
> set the max width, max height, buts per pixel and memory
> port width. The device tree binding only supports the Intel
> Arria10 devkit and its variants. Vendor name retained as
> altr.
>
> Signed-off-by: Ong, Hean Loong <hean.loong.ong@intel.com>
> ---
> v2:
> * Moved Device Tree bindings to Documentation/devicetree/bindings/display/
> * Added vendor name altr, to description
> ---
> .../devicetree/bindings/display/altr,vip-fb2.txt | 30 ++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/altr,vip-fb2.txt
>
> diff --git a/Documentation/devicetree/bindings/display/altr,vip-fb2.txt b/Documentation/devicetree/bindings/display/altr,vip-fb2.txt
> new file mode 100644
> index 0000000..bdffefb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/altr,vip-fb2.txt
> @@ -0,0 +1,30 @@
> +Intel Video and Image Processing(VIP) Frame Buffer II bindings
> +
> +Supported hardware: Arria 10 and above with display port IP
> +
> +The drm driver for the Arria 10 devkit would require the display resolution
Bindings describe h/w. DRM driver is a Linux term.
> +and pixel information to be included as these values are generated based
> +on the FPGA design that drives the video connector attached to the drm driver
> +Information the FPGA video IP component can be acquired from
> +https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_vip.pdf
> +
> +Required properties:
> +
> +- compatible: "altr,vip-frame-buffer-2.0"
> +- reg: Physical base address and length of the framebuffer controller's
> + registers.
> +- altr,max-width: The width of the framebuffer in pixels.
> +- altr,max-height: The height of the framebuffer in pixels.
> +- altr,bits-per-symbol: only "8" is currently supported
Supported in the driver or IP? The former isn't relevant to the binding.
In the latter case, you don't need it if that's the only thing
supported.
> +- altr,mem-port-width = the bus width of the avalon master port on the frame reader
In bits or bytes?
> +
> +Example:
> +
> + dp_0_frame_buf: vip@100000280 {
> + compatible = "altr,vip-frame-buffer-2.0";
> + reg = <0x00000001 0x00000280 0x00000040>;
> + altr,max-width = <1280>;
> + altr,max-height = <720>;
> + altr,bits-per-symbol = <8>;
> + altr,mem-port-width = <128>;
> + };
> --
> 2.7.4
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply
* Re: [PATCH] PM / Domains: Fix DT example
From: Rob Herring @ 2017-04-28 18:37 UTC (permalink / raw)
To: Viresh Kumar
Cc: Rafael Wysocki, Kevin Hilman, Ulf Hansson,
linaro-kernel-cunTk1MwBs8s++Sfvej+rw,
linux-pm-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Vincent Guittot,
devicetree-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <533b52e0ea175bf6bb893370c7f8c0309aae235a.1493104411.git.viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
On Tue, Apr 25, 2017 at 12:48:21PM +0530, Viresh Kumar wrote:
> The power-domain provider's #power-domain-cells field is set to 0 and
> yet the children is using an index to point the power domain. Fix it by
> removing the index field.
>
> Fixes: 70bb510e4279 ("dt/bindings / PM/Domains: Update binding for PM domain idle states")
> Signed-off-by: Viresh Kumar <viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
> Documentation/devicetree/bindings/power/power_domain.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH v3] pinctrl: sh-pfc: r8a7794: add R8A7745 support
From: Sergei Shtylyov @ 2017-04-28 18:52 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Laurent Pinchart, Geert Uytterhoeven,
Linus Walleij, devicetree, linux-renesas-soc, linux-gpio
Cc: Sergei Shtylyov
[-- Attachment #1: pinctrl-sh-pfc-r8a7794-add-R8A7745-support-v3.patch --]
[-- Type: text/plain, Size: 57548 bytes --]
Renesas RZ/G1E (R8A7745) is pin compatible with R-Car E2 (R8A7794),
however it doesn't have several automotive specific peripherals.
Annotate all the items that only exist on the R-Car SoCs...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
This patch is against the 'devel' branch of Linus Walleij's 'linux-pinctrl.git'
repo plus 3 R8A7794 PFC driver fixes/cleanups posted today and the R8A7743 PFC
support patch posted last week...
Changes in version 3:
- resolved rejects atop of the new R8A7794 driver patches renaming the IIC0/1
signals and removing reserved groups/signals;
- undid splitting of 'pinmux_{groups|functions}' arrays into the common and
R8A7794 specfic parts, updated the patch description accordingly;
- kill double spaces in the patch description.
Changes in version 2:
- fixed indentation to use tabs instead of spaces;
- updated the PFC bindings.
Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt | 1
drivers/pinctrl/sh-pfc/Kconfig | 5
drivers/pinctrl/sh-pfc/Makefile | 1
drivers/pinctrl/sh-pfc/core.c | 6
drivers/pinctrl/sh-pfc/pfc-r8a7794.c | 640 +++++-----
drivers/pinctrl/sh-pfc/sh_pfc.h | 1
6 files changed, 369 insertions(+), 285 deletions(-)
Index: linux-pinctrl/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
===================================================================
--- linux-pinctrl.orig/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ linux-pinctrl/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
@@ -14,6 +14,7 @@ Required Properties:
- "renesas,pfc-r8a73a4": for R8A73A4 (R-Mobile APE6) compatible pin-controller.
- "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1) compatible pin-controller.
- "renesas,pfc-r8a7743": for R8A7743 (RZ/G1M) compatible pin-controller.
+ - "renesas,pfc-r8a7745": for R8A7745 (RZ/G1E) compatible pin-controller.
- "renesas,pfc-r8a7778": for R8A7778 (R-Mobile M1) compatible pin-controller.
- "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller.
- "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller.
Index: linux-pinctrl/drivers/pinctrl/sh-pfc/Kconfig
===================================================================
--- linux-pinctrl.orig/drivers/pinctrl/sh-pfc/Kconfig
+++ linux-pinctrl/drivers/pinctrl/sh-pfc/Kconfig
@@ -39,6 +39,11 @@ config PINCTRL_PFC_R8A7743
depends on ARCH_R8A7743
select PINCTRL_SH_PFC
+config PINCTRL_PFC_R8A7745
+ def_bool y
+ depends on ARCH_R8A7745
+ select PINCTRL_SH_PFC
+
config PINCTRL_PFC_R8A7778
def_bool y
depends on ARCH_R8A7778
Index: linux-pinctrl/drivers/pinctrl/sh-pfc/Makefile
===================================================================
--- linux-pinctrl.orig/drivers/pinctrl/sh-pfc/Makefile
+++ linux-pinctrl/drivers/pinctrl/sh-pfc/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_PINCTRL_PFC_EMEV2) += pfc-e
obj-$(CONFIG_PINCTRL_PFC_R8A73A4) += pfc-r8a73a4.o
obj-$(CONFIG_PINCTRL_PFC_R8A7740) += pfc-r8a7740.o
obj-$(CONFIG_PINCTRL_PFC_R8A7743) += pfc-r8a7791.o
+obj-$(CONFIG_PINCTRL_PFC_R8A7745) += pfc-r8a7794.o
obj-$(CONFIG_PINCTRL_PFC_R8A7778) += pfc-r8a7778.o
obj-$(CONFIG_PINCTRL_PFC_R8A7779) += pfc-r8a7779.o
obj-$(CONFIG_PINCTRL_PFC_R8A7790) += pfc-r8a7790.o
Index: linux-pinctrl/drivers/pinctrl/sh-pfc/core.c
===================================================================
--- linux-pinctrl.orig/drivers/pinctrl/sh-pfc/core.c
+++ linux-pinctrl/drivers/pinctrl/sh-pfc/core.c
@@ -491,6 +491,12 @@ static const struct of_device_id sh_pfc_
.data = &r8a7743_pinmux_info,
},
#endif
+#ifdef CONFIG_PINCTRL_PFC_R8A7745
+ {
+ .compatible = "renesas,pfc-r8a7745",
+ .data = &r8a7745_pinmux_info,
+ },
+#endif
#ifdef CONFIG_PINCTRL_PFC_R8A7778
{
.compatible = "renesas,pfc-r8a7778",
Index: linux-pinctrl/drivers/pinctrl/sh-pfc/pfc-r8a7794.c
===================================================================
--- linux-pinctrl.orig/drivers/pinctrl/sh-pfc/pfc-r8a7794.c
+++ linux-pinctrl/drivers/pinctrl/sh-pfc/pfc-r8a7794.c
@@ -1,9 +1,9 @@
/*
- * r8a7794 processor support - PFC hardware block.
+ * r8a7794/r8a7745 processor support - PFC hardware block.
*
* Copyright (C) 2014-2015 Renesas Electronics Corporation
* Copyright (C) 2015 Renesas Solutions Corp.
- * Copyright (C) 2015-2016 Cogent Embedded, Inc., <source@cogentembedded.com>
+ * Copyright (C) 2015-2017 Cogent Embedded, Inc. <source@cogentembedded.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
@@ -132,8 +132,8 @@ enum {
FN_A13, FN_MSIOF1_SS2, FN_SCIFA5_TXD_B,
FN_A14, FN_MSIOF2_RXD, FN_HSCIF0_HRX_B, FN_DREQ1_N,
FN_A15, FN_MSIOF2_TXD, FN_HSCIF0_HTX_B, FN_DACK1,
- FN_A16, FN_MSIOF2_SCK, FN_HSCIF0_HSCK_B, FN_SPEEDIN, FN_CAN_CLK_C,
- FN_TPUTO2_B,
+ FN_A16, FN_MSIOF2_SCK, FN_HSCIF0_HSCK_B, FN_SPEEDIN /* R8A7794 only */,
+ FN_CAN_CLK_C, FN_TPUTO2_B,
FN_A17, FN_MSIOF2_SYNC, FN_SCIF4_RXD_E, FN_CAN1_RX_B,
FN_A18, FN_MSIOF2_SS1, FN_SCIF4_TXD_E, FN_CAN1_TX_B,
FN_A19, FN_MSIOF2_SS2, FN_PWM4, FN_TPUTO2,
@@ -149,13 +149,16 @@ enum {
FN_CS1_N_A26, FN_VI1_DATA9,
FN_EX_CS0_N, FN_VI1_DATA10,
FN_EX_CS1_N, FN_TPUTO3_B, FN_SCIFB2_RXD, FN_VI1_DATA11,
- FN_EX_CS2_N, FN_PWM0, FN_SCIF4_RXD_C, FN_TS_SDATA_B, FN_TPUTO3,
- FN_SCIFB2_TXD,
- FN_EX_CS3_N, FN_SCIFA2_SCK, FN_SCIF4_TXD_C, FN_TS_SCK_B, FN_BPFCLK,
+ FN_EX_CS2_N, FN_PWM0, FN_SCIF4_RXD_C, FN_TS_SDATA_B /* R8A7794 only */,
+ FN_TPUTO3, FN_SCIFB2_TXD,
+ FN_EX_CS3_N, FN_SCIFA2_SCK, FN_SCIF4_TXD_C,
+ FN_TS_SCK_B /* R8A7794 only */, FN_BPFCLK /* R8A7794 only */,
FN_SCIFB2_SCK,
- FN_EX_CS4_N, FN_SCIFA2_RXD, FN_I2C2_SCL_E, FN_TS_SDEN_B, FN_FMCLK,
+ FN_EX_CS4_N, FN_SCIFA2_RXD, FN_I2C2_SCL_E,
+ FN_TS_SDEN_B /* R8A7794 only */, FN_FMCLK /* R8A7794 only */,
FN_SCIFB2_CTS_N,
- FN_EX_CS5_N, FN_SCIFA2_TXD, FN_I2C2_SDA_E, FN_TS_SPSYNC_B, FN_FMIN,
+ FN_EX_CS5_N, FN_SCIFA2_TXD, FN_I2C2_SDA_E,
+ FN_TS_SPSYNC_B /* R8A7794 only */, FN_FMIN /* R8A7794 only */,
FN_SCIFB2_RTS_N,
FN_BS_N, FN_DRACK0, FN_PWM1_C, FN_TPUTO0_C, FN_ATACS01_N,
FN_RD_N, FN_ATACS11_N,
@@ -163,42 +166,48 @@ enum {
/* IPSR4 */
FN_EX_WAIT0, FN_CAN_CLK_B, FN_SCIF_CLK,
- FN_DU0_DR0, FN_LCDOUT16, FN_SCIF5_RXD_C, FN_I2C2_SCL_D,
- FN_DU0_DR1, FN_LCDOUT17, FN_SCIF5_TXD_C, FN_I2C2_SDA_D,
- FN_DU0_DR2, FN_LCDOUT18,
- FN_DU0_DR3, FN_LCDOUT19,
- FN_DU0_DR4, FN_LCDOUT20,
- FN_DU0_DR5, FN_LCDOUT21,
- FN_DU0_DR6, FN_LCDOUT22,
- FN_DU0_DR7, FN_LCDOUT23,
- FN_DU0_DG0, FN_LCDOUT8, FN_SCIFA0_RXD_C, FN_I2C3_SCL_D,
- FN_DU0_DG1, FN_LCDOUT9, FN_SCIFA0_TXD_C, FN_I2C3_SDA_D,
- FN_DU0_DG2, FN_LCDOUT10,
- FN_DU0_DG3, FN_LCDOUT11,
- FN_DU0_DG4, FN_LCDOUT12,
+ FN_DU0_DR0, FN_LCDOUT16 /* R8A7794 only */, FN_SCIF5_RXD_C,
+ FN_I2C2_SCL_D,
+ FN_DU0_DR1, FN_LCDOUT17 /* R8A7794 only */, FN_SCIF5_TXD_C,
+ FN_I2C2_SDA_D,
+ FN_DU0_DR2, FN_LCDOUT18 /* R8A7794 only */,
+ FN_DU0_DR3, FN_LCDOUT19 /* R8A7794 only */,
+ FN_DU0_DR4, FN_LCDOUT20 /* R8A7794 only */,
+ FN_DU0_DR5, FN_LCDOUT21 /* R8A7794 only */,
+ FN_DU0_DR6, FN_LCDOUT22 /* R8A7794 only */,
+ FN_DU0_DR7, FN_LCDOUT23 /* R8A7794 only */,
+ FN_DU0_DG0, FN_LCDOUT8 /* R8A7794 only */, FN_SCIFA0_RXD_C,
+ FN_I2C3_SCL_D,
+ FN_DU0_DG1, FN_LCDOUT9 /* R8A7794 only */, FN_SCIFA0_TXD_C,
+ FN_I2C3_SDA_D,
+ FN_DU0_DG2, FN_LCDOUT10 /* R8A7794 only */,
+ FN_DU0_DG3, FN_LCDOUT11 /* R8A7794 only */,
+ FN_DU0_DG4, FN_LCDOUT12 /* R8A7794 only */,
/* IPSR5 */
- FN_DU0_DG5, FN_LCDOUT13,
- FN_DU0_DG6, FN_LCDOUT14,
- FN_DU0_DG7, FN_LCDOUT15,
- FN_DU0_DB0, FN_LCDOUT0, FN_SCIFA4_RXD_C, FN_I2C4_SCL_D, FN_CAN0_RX_C,
- FN_DU0_DB1, FN_LCDOUT1, FN_SCIFA4_TXD_C, FN_I2C4_SDA_D, FN_CAN0_TX_C,
- FN_DU0_DB2, FN_LCDOUT2,
- FN_DU0_DB3, FN_LCDOUT3,
- FN_DU0_DB4, FN_LCDOUT4,
- FN_DU0_DB5, FN_LCDOUT5,
- FN_DU0_DB6, FN_LCDOUT6,
- FN_DU0_DB7, FN_LCDOUT7,
- FN_DU0_DOTCLKIN, FN_QSTVA_QVS,
- FN_DU0_DOTCLKOUT0, FN_QCLK,
- FN_DU0_DOTCLKOUT1, FN_QSTVB_QVE,
- FN_DU0_EXHSYNC_DU0_HSYNC, FN_QSTH_QHS,
+ FN_DU0_DG5, FN_LCDOUT13 /* R8A7794 only */,
+ FN_DU0_DG6, FN_LCDOUT14 /* R8A7794 only */,
+ FN_DU0_DG7, FN_LCDOUT15 /* R8A7794 only */,
+ FN_DU0_DB0, FN_LCDOUT0 /* R8A7794 only */, FN_SCIFA4_RXD_C,
+ FN_I2C4_SCL_D, FN_CAN0_RX_C,
+ FN_DU0_DB1, FN_LCDOUT1 /* R8A7794 only */, FN_SCIFA4_TXD_C,
+ FN_I2C4_SDA_D, FN_CAN0_TX_C,
+ FN_DU0_DB2, FN_LCDOUT2 /* R8A7794 only */,
+ FN_DU0_DB3, FN_LCDOUT3 /* R8A7794 only */,
+ FN_DU0_DB4, FN_LCDOUT4 /* R8A7794 only */,
+ FN_DU0_DB5, FN_LCDOUT5 /* R8A7794 only */,
+ FN_DU0_DB6, FN_LCDOUT6 /* R8A7794 only */,
+ FN_DU0_DB7, FN_LCDOUT7 /* R8A7794 only */,
+ FN_DU0_DOTCLKIN, FN_QSTVA_QVS /* R8A7794 only */,
+ FN_DU0_DOTCLKOUT0, FN_QCLK /* R8A7794 only */,
+ FN_DU0_DOTCLKOUT1, FN_QSTVB_QVE /* R8A7794 only */,
+ FN_DU0_EXHSYNC_DU0_HSYNC, FN_QSTH_QHS /* R8A7794 only */,
/* IPSR6 */
- FN_DU0_EXVSYNC_DU0_VSYNC, FN_QSTB_QHE,
- FN_DU0_EXODDF_DU0_ODDF_DISP_CDE, FN_QCPV_QDE,
- FN_DU0_DISP, FN_QPOLA,
- FN_DU0_CDE, FN_QPOLB,
+ FN_DU0_EXVSYNC_DU0_VSYNC, FN_QSTB_QHE /* R8A7794 only */,
+ FN_DU0_EXODDF_DU0_ODDF_DISP_CDE, FN_QCPV_QDE /* R8A7794 only */,
+ FN_DU0_DISP, FN_QPOLA /* R8A7794 only */,
+ FN_DU0_CDE, FN_QPOLB /* R8A7794 only */,
FN_VI0_CLK, FN_AVB_RX_CLK,
FN_VI0_DATA0_VI0_B0, FN_AVB_RX_DV,
FN_VI0_DATA1_VI0_B1, FN_AVB_RXD0,
@@ -208,25 +217,28 @@ enum {
FN_VI0_DATA5_VI0_B5, FN_AVB_RXD4,
FN_VI0_DATA6_VI0_B6, FN_AVB_RXD5,
FN_VI0_DATA7_VI0_B7, FN_AVB_RXD6,
- FN_VI0_CLKENB, FN_I2C3_SCL, FN_SCIFA5_RXD_C, FN_IETX_C, FN_AVB_RXD7,
- FN_VI0_FIELD, FN_I2C3_SDA, FN_SCIFA5_TXD_C, FN_IECLK_C, FN_AVB_RX_ER,
- FN_VI0_HSYNC_N, FN_SCIF0_RXD_B, FN_I2C0_SCL_C, FN_IERX_C, FN_AVB_COL,
+ FN_VI0_CLKENB, FN_I2C3_SCL, FN_SCIFA5_RXD_C,
+ FN_IETX_C /* R8A7794 only */, FN_AVB_RXD7,
+ FN_VI0_FIELD, FN_I2C3_SDA, FN_SCIFA5_TXD_C,
+ FN_IECLK_C /* R8A7794 only */, FN_AVB_RX_ER,
+ FN_VI0_HSYNC_N, FN_SCIF0_RXD_B, FN_I2C0_SCL_C,
+ FN_IERX_C /* R8A7794 only */, FN_AVB_COL,
FN_VI0_VSYNC_N, FN_SCIF0_TXD_B, FN_I2C0_SDA_C, FN_AUDIO_CLKOUT_B,
FN_AVB_TX_EN,
FN_ETH_MDIO, FN_VI0_G0, FN_MSIOF2_RXD_B, FN_I2C5_SCL_D, FN_AVB_TX_CLK,
- FN_ADIDATA,
+ FN_ADIDATA /* R8A7794 only */,
/* IPSR7 */
FN_ETH_CRS_DV, FN_VI0_G1, FN_MSIOF2_TXD_B, FN_I2C5_SDA_D, FN_AVB_TXD0,
- FN_ADICS_SAMP,
+ FN_ADICS_SAMP /* R8A7794 only */,
FN_ETH_RX_ER, FN_VI0_G2, FN_MSIOF2_SCK_B, FN_CAN0_RX_B, FN_AVB_TXD1,
- FN_ADICLK,
+ FN_ADICLK /* R8A7794 only */,
FN_ETH_RXD0, FN_VI0_G3, FN_MSIOF2_SYNC_B, FN_CAN0_TX_B, FN_AVB_TXD2,
- FN_ADICHS0,
+ FN_ADICHS0 /* R8A7794 only */,
FN_ETH_RXD1, FN_VI0_G4, FN_MSIOF2_SS1_B, FN_SCIF4_RXD_D, FN_AVB_TXD3,
- FN_ADICHS1,
+ FN_ADICHS1 /* R8A7794 only */,
FN_ETH_LINK, FN_VI0_G5, FN_MSIOF2_SS2_B, FN_SCIF4_TXD_D, FN_AVB_TXD4,
- FN_ADICHS2,
+ FN_ADICHS2 /* R8A7794 only */,
FN_ETH_REFCLK, FN_VI0_G6, FN_SCIF2_SCK_C, FN_AVB_TXD5, FN_SSI_SCK5_B,
FN_ETH_TXD1, FN_VI0_G7, FN_SCIF2_RXD_C, FN_IIC0_SCL_D, FN_AVB_TXD6,
FN_SSI_WS5_B,
@@ -253,26 +265,32 @@ enum {
FN_CAN1_RX_D, FN_TPUTO0_B,
FN_I2C0_SDA, FN_SCIF0_TXD_C, FN_TPUTO0, FN_CAN_CLK, FN_DVC_MUTE,
FN_CAN1_TX_D,
- FN_I2C1_SCL, FN_SCIF4_RXD, FN_PWM5_B, FN_DU1_DR0, FN_TS_SDATA_D,
- FN_TPUTO1_B,
- FN_I2C1_SDA, FN_SCIF4_TXD, FN_IRQ5, FN_DU1_DR1, FN_TS_SCK_D,
- FN_BPFCLK_C,
- FN_MSIOF0_RXD, FN_SCIF5_RXD, FN_I2C2_SCL_C, FN_DU1_DR2, FN_TS_SDEN_D,
- FN_FMCLK_C,
+ FN_I2C1_SCL, FN_SCIF4_RXD, FN_PWM5_B, FN_DU1_DR0,
+ FN_TS_SDATA_D /* R8A7794 only */, FN_TPUTO1_B,
+ FN_I2C1_SDA, FN_SCIF4_TXD, FN_IRQ5, FN_DU1_DR1,
+ FN_TS_SCK_D /* R8A7794 only */, FN_BPFCLK_C /* R8A7794 only */,
+ FN_MSIOF0_RXD, FN_SCIF5_RXD, FN_I2C2_SCL_C, FN_DU1_DR2,
+ FN_TS_SDEN_D /* R8A7794 only */, FN_FMCLK_C /* R8A7794 only */,
/* IPSR9 */
- FN_MSIOF0_TXD, FN_SCIF5_TXD, FN_I2C2_SDA_C, FN_DU1_DR3, FN_TS_SPSYNC_D,
- FN_FMIN_C,
- FN_MSIOF0_SCK, FN_IRQ0, FN_TS_SDATA, FN_DU1_DR4, FN_TPUTO1_C,
- FN_MSIOF0_SYNC, FN_PWM1, FN_TS_SCK, FN_DU1_DR5, FN_BPFCLK_B,
- FN_MSIOF0_SS1, FN_SCIFA0_RXD, FN_TS_SDEN, FN_DU1_DR6, FN_FMCLK_B,
- FN_MSIOF0_SS2, FN_SCIFA0_TXD, FN_TS_SPSYNC, FN_DU1_DR7, FN_FMIN_B,
+ FN_MSIOF0_TXD, FN_SCIF5_TXD, FN_I2C2_SDA_C, FN_DU1_DR3,
+ FN_TS_SPSYNC_D /* R8A7794 only */, FN_FMIN_C /* R8A7794 only */,
+ FN_MSIOF0_SCK, FN_IRQ0, FN_TS_SDATA /* R8A7794 only */, FN_DU1_DR4,
+ FN_TPUTO1_C,
+ FN_MSIOF0_SYNC, FN_PWM1, FN_TS_SCK /* R8A7794 only */, FN_DU1_DR5,
+ FN_BPFCLK_B /* R8A7794 only */,
+ FN_MSIOF0_SS1, FN_SCIFA0_RXD, FN_TS_SDEN /* R8A7794 only */, FN_DU1_DR6,
+ FN_FMCLK_B /* R8A7794 only */,
+ FN_MSIOF0_SS2, FN_SCIFA0_TXD, FN_TS_SPSYNC /* R8A7794 only */,
+ FN_DU1_DR7, FN_FMIN_B /* R8A7794 only */,
FN_HSCIF1_HRX, FN_I2C4_SCL, FN_PWM6, FN_DU1_DG0,
FN_HSCIF1_HTX, FN_I2C4_SDA, FN_TPUTO1, FN_DU1_DG1,
- FN_HSCIF1_HSCK, FN_PWM2, FN_IETX, FN_DU1_DG2, FN_REMOCON_B,
- FN_SPEEDIN_B,
- FN_HSCIF1_HCTS_N, FN_SCIFA4_RXD, FN_IECLK, FN_DU1_DG3, FN_SSI_SCK1_B,
- FN_HSCIF1_HRTS_N, FN_SCIFA4_TXD, FN_IERX, FN_DU1_DG4, FN_SSI_WS1_B,
+ FN_HSCIF1_HSCK, FN_PWM2, FN_IETX /* R8A7794 only */, FN_DU1_DG2,
+ FN_REMOCON_B /* R8A7794 only */, FN_SPEEDIN_B /* R8A7794 only */,
+ FN_HSCIF1_HCTS_N, FN_SCIFA4_RXD, FN_IECLK /* R8A7794 only */,
+ FN_DU1_DG3, FN_SSI_SCK1_B,
+ FN_HSCIF1_HRTS_N, FN_SCIFA4_TXD, FN_IERX /* R8A7794 only */,
+ FN_DU1_DG4, FN_SSI_WS1_B,
FN_SCIF1_SCK, FN_PWM3, FN_TCLK2, FN_DU1_DG5, FN_SSI_SDATA1_B,
/* IPSR10 */
@@ -281,11 +299,12 @@ enum {
FN_SCIF2_RXD, FN_IIC0_SCL, FN_DU1_DB0, FN_SSI_SDATA2_B,
FN_SCIF2_TXD, FN_IIC0_SDA, FN_DU1_DB1, FN_SSI_SCK9_B,
FN_SCIF2_SCK, FN_IRQ1, FN_DU1_DB2, FN_SSI_WS9_B,
- FN_SCIF3_SCK, FN_IRQ2, FN_BPFCLK_D, FN_DU1_DB3, FN_SSI_SDATA9_B,
- FN_SCIF3_RXD, FN_I2C1_SCL_E, FN_FMCLK_D, FN_DU1_DB4, FN_AUDIO_CLKA_C,
- FN_SSI_SCK4_B,
- FN_SCIF3_TXD, FN_I2C1_SDA_E, FN_FMIN_D, FN_DU1_DB5, FN_AUDIO_CLKB_C,
- FN_SSI_WS4_B,
+ FN_SCIF3_SCK, FN_IRQ2, FN_BPFCLK_D /* R8A7794 only */, FN_DU1_DB3,
+ FN_SSI_SDATA9_B,
+ FN_SCIF3_RXD, FN_I2C1_SCL_E, FN_FMCLK_D /* R8A7794 only */, FN_DU1_DB4,
+ FN_AUDIO_CLKA_C, FN_SSI_SCK4_B,
+ FN_SCIF3_TXD, FN_I2C1_SDA_E, FN_FMIN_D /* R8A7794 only */, FN_DU1_DB5,
+ FN_AUDIO_CLKB_C, FN_SSI_WS4_B,
FN_I2C2_SCL, FN_SCIFA5_RXD, FN_DU1_DB6, FN_AUDIO_CLKC_C,
FN_SSI_SDATA4_B,
FN_I2C2_SDA, FN_SCIFA5_TXD, FN_DU1_DB7, FN_AUDIO_CLKOUT_C,
@@ -301,21 +320,28 @@ enum {
FN_SSI_SCK78, FN_SCIFA2_SCK_B, FN_I2C5_SDA_C, FN_DU1_DISP,
FN_SSI_WS78, FN_SCIFA2_RXD_B, FN_I2C5_SCL_C, FN_DU1_CDE,
FN_SSI_SDATA7, FN_SCIFA2_TXD_B, FN_IRQ8, FN_AUDIO_CLKA_D, FN_CAN_CLK_D,
- FN_SSI_SCK0129, FN_MSIOF1_RXD_B, FN_SCIF5_RXD_D, FN_ADIDATA_B,
- FN_SSI_WS0129, FN_MSIOF1_TXD_B, FN_SCIF5_TXD_D, FN_ADICS_SAMP_B,
- FN_SSI_SDATA0, FN_MSIOF1_SCK_B, FN_PWM0_B, FN_ADICLK_B,
+ FN_SSI_SCK0129, FN_MSIOF1_RXD_B, FN_SCIF5_RXD_D,
+ FN_ADIDATA_B /* R8A7794 only */,
+ FN_SSI_WS0129, FN_MSIOF1_TXD_B, FN_SCIF5_TXD_D,
+ FN_ADICS_SAMP_B /* R8A7794 only */,
+ FN_SSI_SDATA0, FN_MSIOF1_SCK_B, FN_PWM0_B,
+ FN_ADICLK_B /* R8A7794 only */,
/* IPSR12 */
- FN_SSI_SCK34, FN_MSIOF1_SYNC_B, FN_SCIFA1_SCK_C, FN_ADICHS0_B,
- FN_DREQ1_N_B,
- FN_SSI_WS34, FN_MSIOF1_SS1_B, FN_SCIFA1_RXD_C, FN_ADICHS1_B,
- FN_CAN1_RX_C, FN_DACK1_B,
- FN_SSI_SDATA3, FN_MSIOF1_SS2_B, FN_SCIFA1_TXD_C, FN_ADICHS2_B,
- FN_CAN1_TX_C, FN_DREQ2_N,
- FN_SSI_SCK4, FN_MLB_CLK, FN_IETX_B, FN_SSI_WS4, FN_MLB_SIG, FN_IECLK_B,
- FN_SSI_SDATA4, FN_MLB_DAT, FN_IERX_B,
- FN_SSI_SDATA8, FN_SCIF1_SCK_B, FN_PWM1_B, FN_IRQ9, FN_REMOCON,
- FN_DACK2, FN_ETH_MDIO_B,
+ FN_SSI_SCK34, FN_MSIOF1_SYNC_B, FN_SCIFA1_SCK_C,
+ FN_ADICHS0_B /* R8A7794 only */, FN_DREQ1_N_B,
+ FN_SSI_WS34, FN_MSIOF1_SS1_B, FN_SCIFA1_RXD_C,
+ FN_ADICHS1_B /* R8A7794 only */, FN_CAN1_RX_C, FN_DACK1_B,
+ FN_SSI_SDATA3, FN_MSIOF1_SS2_B, FN_SCIFA1_TXD_C,
+ FN_ADICHS2_B /* R8A7794 only */, FN_CAN1_TX_C, FN_DREQ2_N,
+ FN_SSI_SCK4, FN_MLB_CLK /* R8A7794 only */,
+ FN_IETX_B /* R8A7794 only */,
+ FN_SSI_WS4, FN_MLB_SIG /* R8A7794 only */,
+ FN_IECLK_B /* R8A7794 only */,
+ FN_SSI_SDATA4, FN_MLB_DAT /* R8A7794 only */,
+ FN_IERX_B /* R8A7794 only */,
+ FN_SSI_SDATA8, FN_SCIF1_SCK_B, FN_PWM1_B, FN_IRQ9,
+ FN_REMOCON /* R8A7794 only */, FN_DACK2, FN_ETH_MDIO_B,
FN_SSI_SCK1, FN_SCIF1_RXD_B, FN_IIC0_SCL_C, FN_VI1_CLK, FN_CAN0_RX_D,
FN_ETH_CRS_DV_B,
FN_SSI_WS1, FN_SCIF1_TXD_B, FN_IIC0_SDA_C, FN_VI1_DATA0, FN_CAN0_TX_D,
@@ -336,19 +362,20 @@ enum {
FN_SSI_SDATA9, FN_SCIF2_TXD_B, FN_I2C3_SDA_E, FN_VI1_DATA7,
FN_ATADIR0_N, FN_ETH_MAGIC_B,
FN_AUDIO_CLKA, FN_I2C0_SCL_B, FN_SCIFA4_RXD_D, FN_VI1_CLKENB,
- FN_TS_SDATA_C, FN_ETH_TXD0_B,
+ FN_TS_SDATA_C /* R8A7794 only */, FN_ETH_TXD0_B,
FN_AUDIO_CLKB, FN_I2C0_SDA_B, FN_SCIFA4_TXD_D, FN_VI1_FIELD,
- FN_TS_SCK_C, FN_BPFCLK_E, FN_ETH_MDC_B,
+ FN_TS_SCK_C /* R8A7794 only */, FN_BPFCLK_E /* R8A7794 only */,
+ FN_ETH_MDC_B,
FN_AUDIO_CLKC, FN_I2C4_SCL_B, FN_SCIFA5_RXD_D, FN_VI1_HSYNC_N,
- FN_TS_SDEN_C, FN_FMCLK_E,
+ FN_TS_SDEN_C /* R8A7794 only */, FN_FMCLK_E /* R8A7794 only */,
FN_AUDIO_CLKOUT, FN_I2C4_SDA_B, FN_SCIFA5_TXD_D, FN_VI1_VSYNC_N,
- FN_TS_SPSYNC_C, FN_FMIN_E,
+ FN_TS_SPSYNC_C /* R8A7794 only */, FN_FMIN_E /* R8A7794 only */,
/* MOD_SEL */
FN_SEL_ADG_0, FN_SEL_ADG_1, FN_SEL_ADG_2, FN_SEL_ADG_3,
FN_SEL_CAN_0, FN_SEL_CAN_1, FN_SEL_CAN_2, FN_SEL_CAN_3,
- FN_SEL_DARC_0, FN_SEL_DARC_1, FN_SEL_DARC_2, FN_SEL_DARC_3,
- FN_SEL_DARC_4,
+ /* R8A7794 only */ FN_SEL_DARC_0, FN_SEL_DARC_1, FN_SEL_DARC_2,
+ /* R8A7794 only */ FN_SEL_DARC_3, FN_SEL_DARC_4,
FN_SEL_ETH_0, FN_SEL_ETH_1,
FN_SEL_I2C00_0, FN_SEL_I2C00_1, FN_SEL_I2C00_2, FN_SEL_I2C00_3,
FN_SEL_I2C00_4,
@@ -363,18 +390,20 @@ enum {
FN_SEL_I2C05_0, FN_SEL_I2C05_1, FN_SEL_I2C05_2, FN_SEL_I2C05_3,
/* MOD_SEL2 */
- FN_SEL_IEB_0, FN_SEL_IEB_1, FN_SEL_IEB_2,
+ /* R8A7794 only */ FN_SEL_IEB_0, FN_SEL_IEB_1, FN_SEL_IEB_2,
FN_SEL_IIC0_0, FN_SEL_IIC0_1, FN_SEL_IIC0_2, FN_SEL_IIC0_3,
FN_SEL_LBS_0, FN_SEL_LBS_1, FN_SEL_MSI1_0, FN_SEL_MSI1_1,
FN_SEL_MSI2_0, FN_SEL_MSI2_1, FN_SEL_RAD_0, FN_SEL_RAD_1,
- FN_SEL_RCN_0, FN_SEL_RCN_1, FN_SEL_RSP_0, FN_SEL_RSP_1,
+ /* R8A7794 only */ FN_SEL_RCN_0, FN_SEL_RCN_1,
+ /* R8A7794 only */ FN_SEL_RSP_0, FN_SEL_RSP_1,
FN_SEL_SCIFA0_0, FN_SEL_SCIFA0_1, FN_SEL_SCIFA0_2, FN_SEL_SCIFA0_3,
FN_SEL_SCIFA1_0, FN_SEL_SCIFA1_1, FN_SEL_SCIFA1_2,
FN_SEL_SCIFA2_0, FN_SEL_SCIFA2_1, FN_SEL_SCIFA3_0, FN_SEL_SCIFA3_1,
FN_SEL_SCIFA4_0, FN_SEL_SCIFA4_1, FN_SEL_SCIFA4_2, FN_SEL_SCIFA4_3,
FN_SEL_SCIFA5_0, FN_SEL_SCIFA5_1, FN_SEL_SCIFA5_2, FN_SEL_SCIFA5_3,
FN_SEL_TMU_0, FN_SEL_TMU_1,
- FN_SEL_TSIF0_0, FN_SEL_TSIF0_1, FN_SEL_TSIF0_2, FN_SEL_TSIF0_3,
+ /* R8A7794 only */ FN_SEL_TSIF0_0, FN_SEL_TSIF0_1, FN_SEL_TSIF0_2,
+ /* R8A7794 only */ FN_SEL_TSIF0_3,
FN_SEL_CAN0_0, FN_SEL_CAN0_1, FN_SEL_CAN0_2, FN_SEL_CAN0_3,
FN_SEL_CAN1_0, FN_SEL_CAN1_1, FN_SEL_CAN1_2, FN_SEL_CAN1_3,
FN_SEL_HSCIF0_0, FN_SEL_HSCIF0_1, FN_SEL_HSCIF1_0, FN_SEL_HSCIF1_1,
@@ -443,8 +472,8 @@ enum {
A13_MARK, MSIOF1_SS2_MARK, SCIFA5_TXD_B_MARK,
A14_MARK, MSIOF2_RXD_MARK, HSCIF0_HRX_B_MARK, DREQ1_N_MARK,
A15_MARK, MSIOF2_TXD_MARK, HSCIF0_HTX_B_MARK, DACK1_MARK,
- A16_MARK, MSIOF2_SCK_MARK, HSCIF0_HSCK_B_MARK, SPEEDIN_MARK,
- CAN_CLK_C_MARK, TPUTO2_B_MARK,
+ A16_MARK, MSIOF2_SCK_MARK, HSCIF0_HSCK_B_MARK,
+ SPEEDIN_MARK /* R8A7794 only */, CAN_CLK_C_MARK, TPUTO2_B_MARK,
A17_MARK, MSIOF2_SYNC_MARK, SCIF4_RXD_E_MARK, CAN1_RX_B_MARK,
A18_MARK, MSIOF2_SS1_MARK, SCIF4_TXD_E_MARK, CAN1_TX_B_MARK,
A19_MARK, MSIOF2_SS2_MARK, PWM4_MARK, TPUTO2_MARK,
@@ -460,57 +489,65 @@ enum {
CS1_N_A26_MARK, VI1_DATA9_MARK,
EX_CS0_N_MARK, VI1_DATA10_MARK,
EX_CS1_N_MARK, TPUTO3_B_MARK, SCIFB2_RXD_MARK, VI1_DATA11_MARK,
- EX_CS2_N_MARK, PWM0_MARK, SCIF4_RXD_C_MARK, TS_SDATA_B_MARK,
- TPUTO3_MARK, SCIFB2_TXD_MARK,
- EX_CS3_N_MARK, SCIFA2_SCK_MARK, SCIF4_TXD_C_MARK, TS_SCK_B_MARK,
- BPFCLK_MARK, SCIFB2_SCK_MARK,
- EX_CS4_N_MARK, SCIFA2_RXD_MARK, I2C2_SCL_E_MARK, TS_SDEN_B_MARK,
- FMCLK_MARK, SCIFB2_CTS_N_MARK,
- EX_CS5_N_MARK, SCIFA2_TXD_MARK, I2C2_SDA_E_MARK, TS_SPSYNC_B_MARK,
- FMIN_MARK, SCIFB2_RTS_N_MARK,
+ EX_CS2_N_MARK, PWM0_MARK, SCIF4_RXD_C_MARK,
+ TS_SDATA_B_MARK /* R8A7794 only */, TPUTO3_MARK, SCIFB2_TXD_MARK,
+ EX_CS3_N_MARK, SCIFA2_SCK_MARK, SCIF4_TXD_C_MARK,
+ TS_SCK_B_MARK /* R8A7794 only */, BPFCLK_MARK /* R8A7794 only */,
+ SCIFB2_SCK_MARK,
+ EX_CS4_N_MARK, SCIFA2_RXD_MARK, I2C2_SCL_E_MARK,
+ TS_SDEN_B_MARK /* R8A7794 only */, FMCLK_MARK /* R8A7794 only */,
+ SCIFB2_CTS_N_MARK,
+ EX_CS5_N_MARK, SCIFA2_TXD_MARK, I2C2_SDA_E_MARK,
+ TS_SPSYNC_B_MARK /* R8A7794 only */, FMIN_MARK /* R8A7794 only */,
+ SCIFB2_RTS_N_MARK,
BS_N_MARK, DRACK0_MARK, PWM1_C_MARK, TPUTO0_C_MARK, ATACS01_N_MARK,
RD_N_MARK, ATACS11_N_MARK,
RD_WR_N_MARK, ATAG1_N_MARK,
/* IPSR4 */
EX_WAIT0_MARK, CAN_CLK_B_MARK, SCIF_CLK_MARK,
- DU0_DR0_MARK, LCDOUT16_MARK, SCIF5_RXD_C_MARK, I2C2_SCL_D_MARK,
- DU0_DR1_MARK, LCDOUT17_MARK, SCIF5_TXD_C_MARK, I2C2_SDA_D_MARK,
- DU0_DR2_MARK, LCDOUT18_MARK,
- DU0_DR3_MARK, LCDOUT19_MARK,
- DU0_DR4_MARK, LCDOUT20_MARK,
- DU0_DR5_MARK, LCDOUT21_MARK,
- DU0_DR6_MARK, LCDOUT22_MARK,
- DU0_DR7_MARK, LCDOUT23_MARK,
- DU0_DG0_MARK, LCDOUT8_MARK, SCIFA0_RXD_C_MARK, I2C3_SCL_D_MARK,
- DU0_DG1_MARK, LCDOUT9_MARK, SCIFA0_TXD_C_MARK, I2C3_SDA_D_MARK,
- DU0_DG2_MARK, LCDOUT10_MARK,
- DU0_DG3_MARK, LCDOUT11_MARK,
- DU0_DG4_MARK, LCDOUT12_MARK,
+ DU0_DR0_MARK, LCDOUT16_MARK /* R8A7794 only */, SCIF5_RXD_C_MARK,
+ I2C2_SCL_D_MARK,
+ DU0_DR1_MARK, LCDOUT17_MARK /* R8A7794 only */, SCIF5_TXD_C_MARK,
+ I2C2_SDA_D_MARK,
+ DU0_DR2_MARK, LCDOUT18_MARK /* R8A7794 only */,
+ DU0_DR3_MARK, LCDOUT19_MARK /* R8A7794 only */,
+ DU0_DR4_MARK, LCDOUT20_MARK /* R8A7794 only */,
+ DU0_DR5_MARK, LCDOUT21_MARK /* R8A7794 only */,
+ DU0_DR6_MARK, LCDOUT22_MARK /* R8A7794 only */,
+ DU0_DR7_MARK, LCDOUT23_MARK /* R8A7794 only */,
+ DU0_DG0_MARK, LCDOUT8_MARK /* R8A7794 only */, SCIFA0_RXD_C_MARK,
+ I2C3_SCL_D_MARK,
+ DU0_DG1_MARK, LCDOUT9_MARK /* R8A7794 only */, SCIFA0_TXD_C_MARK,
+ I2C3_SDA_D_MARK,
+ DU0_DG2_MARK, LCDOUT10_MARK /* R8A7794 only */,
+ DU0_DG3_MARK, LCDOUT11_MARK /* R8A7794 only */,
+ DU0_DG4_MARK, LCDOUT12_MARK /* R8A7794 only */,
/* IPSR5 */
- DU0_DG5_MARK, LCDOUT13_MARK,
- DU0_DG6_MARK, LCDOUT14_MARK,
- DU0_DG7_MARK, LCDOUT15_MARK,
- DU0_DB0_MARK, LCDOUT0_MARK, SCIFA4_RXD_C_MARK, I2C4_SCL_D_MARK,
- CAN0_RX_C_MARK,
- DU0_DB1_MARK, LCDOUT1_MARK, SCIFA4_TXD_C_MARK, I2C4_SDA_D_MARK,
- CAN0_TX_C_MARK,
- DU0_DB2_MARK, LCDOUT2_MARK,
- DU0_DB3_MARK, LCDOUT3_MARK,
- DU0_DB4_MARK, LCDOUT4_MARK,
- DU0_DB5_MARK, LCDOUT5_MARK,
- DU0_DB6_MARK, LCDOUT6_MARK,
- DU0_DB7_MARK, LCDOUT7_MARK,
- DU0_DOTCLKIN_MARK, QSTVA_QVS_MARK,
- DU0_DOTCLKOUT0_MARK, QCLK_MARK,
- DU0_DOTCLKOUT1_MARK, QSTVB_QVE_MARK,
- DU0_EXHSYNC_DU0_HSYNC_MARK, QSTH_QHS_MARK,
+ DU0_DG5_MARK, LCDOUT13_MARK /* R8A7794 only */,
+ DU0_DG6_MARK, LCDOUT14_MARK /* R8A7794 only */,
+ DU0_DG7_MARK, LCDOUT15_MARK /* R8A7794 only */,
+ DU0_DB0_MARK, LCDOUT0_MARK /* R8A7794 only */, SCIFA4_RXD_C_MARK,
+ I2C4_SCL_D_MARK, CAN0_RX_C_MARK,
+ DU0_DB1_MARK, LCDOUT1_MARK /* R8A7794 only */, SCIFA4_TXD_C_MARK,
+ I2C4_SDA_D_MARK, CAN0_TX_C_MARK,
+ DU0_DB2_MARK, LCDOUT2_MARK /* R8A7794 only */,
+ DU0_DB3_MARK, LCDOUT3_MARK /* R8A7794 only */,
+ DU0_DB4_MARK, LCDOUT4_MARK /* R8A7794 only */,
+ DU0_DB5_MARK, LCDOUT5_MARK /* R8A7794 only */,
+ DU0_DB6_MARK, LCDOUT6_MARK /* R8A7794 only */,
+ DU0_DB7_MARK, LCDOUT7_MARK /* R8A7794 only */,
+ DU0_DOTCLKIN_MARK, QSTVA_QVS_MARK /* R8A7794 only */,
+ DU0_DOTCLKOUT0_MARK, QCLK_MARK /* R8A7794 only */,
+ DU0_DOTCLKOUT1_MARK, QSTVB_QVE_MARK /* R8A7794 only */,
+ DU0_EXHSYNC_DU0_HSYNC_MARK, QSTH_QHS_MARK /* R8A7794 only */,
/* IPSR6 */
- DU0_EXVSYNC_DU0_VSYNC_MARK, QSTB_QHE_MARK,
- DU0_EXODDF_DU0_ODDF_DISP_CDE_MARK, QCPV_QDE_MARK,
- DU0_DISP_MARK, QPOLA_MARK, DU0_CDE_MARK, QPOLB_MARK,
+ DU0_EXVSYNC_DU0_VSYNC_MARK, QSTB_QHE_MARK /* R8A7794 only */,
+ DU0_EXODDF_DU0_ODDF_DISP_CDE_MARK, QCPV_QDE_MARK /* R8A7794 only */,
+ DU0_DISP_MARK, QPOLA_MARK /* R8A7794 only */,
+ DU0_CDE_MARK, QPOLB_MARK /* R8A7794 only */,
VI0_CLK_MARK, AVB_RX_CLK_MARK, VI0_DATA0_VI0_B0_MARK, AVB_RX_DV_MARK,
VI0_DATA1_VI0_B1_MARK, AVB_RXD0_MARK,
VI0_DATA2_VI0_B2_MARK, AVB_RXD1_MARK,
@@ -519,28 +556,28 @@ enum {
VI0_DATA5_VI0_B5_MARK, AVB_RXD4_MARK,
VI0_DATA6_VI0_B6_MARK, AVB_RXD5_MARK,
VI0_DATA7_VI0_B7_MARK, AVB_RXD6_MARK,
- VI0_CLKENB_MARK, I2C3_SCL_MARK, SCIFA5_RXD_C_MARK, IETX_C_MARK,
- AVB_RXD7_MARK,
- VI0_FIELD_MARK, I2C3_SDA_MARK, SCIFA5_TXD_C_MARK, IECLK_C_MARK,
- AVB_RX_ER_MARK,
- VI0_HSYNC_N_MARK, SCIF0_RXD_B_MARK, I2C0_SCL_C_MARK, IERX_C_MARK,
- AVB_COL_MARK,
+ VI0_CLKENB_MARK, I2C3_SCL_MARK, SCIFA5_RXD_C_MARK,
+ IETX_C_MARK /* R8A7794 only */, AVB_RXD7_MARK,
+ VI0_FIELD_MARK, I2C3_SDA_MARK, SCIFA5_TXD_C_MARK,
+ IECLK_C_MARK /* R8A7794 only */, AVB_RX_ER_MARK,
+ VI0_HSYNC_N_MARK, SCIF0_RXD_B_MARK, I2C0_SCL_C_MARK,
+ IERX_C_MARK /* R8A7794 only */, AVB_COL_MARK,
VI0_VSYNC_N_MARK, SCIF0_TXD_B_MARK, I2C0_SDA_C_MARK,
AUDIO_CLKOUT_B_MARK, AVB_TX_EN_MARK,
ETH_MDIO_MARK, VI0_G0_MARK, MSIOF2_RXD_B_MARK, I2C5_SCL_D_MARK,
- AVB_TX_CLK_MARK, ADIDATA_MARK,
+ AVB_TX_CLK_MARK, ADIDATA_MARK /* R8A7794 only */,
/* IPSR7 */
ETH_CRS_DV_MARK, VI0_G1_MARK, MSIOF2_TXD_B_MARK, I2C5_SDA_D_MARK,
- AVB_TXD0_MARK, ADICS_SAMP_MARK,
+ AVB_TXD0_MARK, ADICS_SAMP_MARK /* R8A7794 only */,
ETH_RX_ER_MARK, VI0_G2_MARK, MSIOF2_SCK_B_MARK, CAN0_RX_B_MARK,
- AVB_TXD1_MARK, ADICLK_MARK,
+ AVB_TXD1_MARK, ADICLK_MARK /* R8A7794 only */,
ETH_RXD0_MARK, VI0_G3_MARK, MSIOF2_SYNC_B_MARK, CAN0_TX_B_MARK,
- AVB_TXD2_MARK, ADICHS0_MARK,
+ AVB_TXD2_MARK, ADICHS0_MARK /* R8A7794 only */,
ETH_RXD1_MARK, VI0_G4_MARK, MSIOF2_SS1_B_MARK, SCIF4_RXD_D_MARK,
- AVB_TXD3_MARK, ADICHS1_MARK,
+ AVB_TXD3_MARK, ADICHS1_MARK /* R8A7794 only */,
ETH_LINK_MARK, VI0_G5_MARK, MSIOF2_SS2_B_MARK, SCIF4_TXD_D_MARK,
- AVB_TXD4_MARK, ADICHS2_MARK,
+ AVB_TXD4_MARK, ADICHS2_MARK /* R8A7794 only */,
ETH_REFCLK_MARK, VI0_G6_MARK, SCIF2_SCK_C_MARK, AVB_TXD5_MARK,
SSI_SCK5_B_MARK,
ETH_TXD1_MARK, VI0_G7_MARK, SCIF2_RXD_C_MARK, IIC0_SCL_D_MARK,
@@ -568,31 +605,34 @@ enum {
SCIF0_TXD_C_MARK, TPUTO0_MARK, CAN_CLK_MARK, DVC_MUTE_MARK,
CAN1_TX_D_MARK,
I2C1_SCL_MARK, SCIF4_RXD_MARK, PWM5_B_MARK, DU1_DR0_MARK,
- TS_SDATA_D_MARK, TPUTO1_B_MARK,
- I2C1_SDA_MARK, SCIF4_TXD_MARK, IRQ5_MARK, DU1_DR1_MARK, TS_SCK_D_MARK,
- BPFCLK_C_MARK,
+ TS_SDATA_D_MARK /* R8A7794 only */, TPUTO1_B_MARK,
+ I2C1_SDA_MARK, SCIF4_TXD_MARK, IRQ5_MARK, DU1_DR1_MARK,
+ TS_SCK_D_MARK /* R8A7794 only */, BPFCLK_C_MARK /* R8A7794 only */,
MSIOF0_RXD_MARK, SCIF5_RXD_MARK, I2C2_SCL_C_MARK, DU1_DR2_MARK,
- TS_SDEN_D_MARK, FMCLK_C_MARK,
+ TS_SDEN_D_MARK /* R8A7794 only */, FMCLK_C_MARK /* R8A7794 only */,
/* IPSR9 */
MSIOF0_TXD_MARK, SCIF5_TXD_MARK, I2C2_SDA_C_MARK, DU1_DR3_MARK,
- TS_SPSYNC_D_MARK, FMIN_C_MARK,
- MSIOF0_SCK_MARK, IRQ0_MARK, TS_SDATA_MARK, DU1_DR4_MARK, TPUTO1_C_MARK,
- MSIOF0_SYNC_MARK, PWM1_MARK, TS_SCK_MARK, DU1_DR5_MARK, BPFCLK_B_MARK,
- MSIOF0_SS1_MARK, SCIFA0_RXD_MARK, TS_SDEN_MARK, DU1_DR6_MARK,
- FMCLK_B_MARK,
- MSIOF0_SS2_MARK, SCIFA0_TXD_MARK, TS_SPSYNC_MARK, DU1_DR7_MARK,
- FMIN_B_MARK,
+ TS_SPSYNC_D_MARK /* R8A7794 only */, FMIN_C_MARK /* R8A7794 only */,
+ MSIOF0_SCK_MARK, IRQ0_MARK, TS_SDATA_MARK /* R8A7794 only */,
+ DU1_DR4_MARK, TPUTO1_C_MARK,
+ MSIOF0_SYNC_MARK, PWM1_MARK, TS_SCK_MARK /* R8A7794 only */,
+ DU1_DR5_MARK, BPFCLK_B_MARK /* R8A7794 only */,
+ MSIOF0_SS1_MARK, SCIFA0_RXD_MARK, TS_SDEN_MARK /* R8A7794 only */,
+ DU1_DR6_MARK, FMCLK_B_MARK /* R8A7794 only */,
+ MSIOF0_SS2_MARK, SCIFA0_TXD_MARK, TS_SPSYNC_MARK /* R8A7794 only */,
+ DU1_DR7_MARK, FMIN_B_MARK /* R8A7794 only */,
HSCIF1_HRX_MARK, I2C4_SCL_MARK, PWM6_MARK, DU1_DG0_MARK,
HSCIF1_HTX_MARK, I2C4_SDA_MARK, TPUTO1_MARK, DU1_DG1_MARK,
- HSCIF1_HSCK_MARK, PWM2_MARK, IETX_MARK, DU1_DG2_MARK, REMOCON_B_MARK,
- SPEEDIN_B_MARK,
- HSCIF1_HCTS_N_MARK, SCIFA4_RXD_MARK, IECLK_MARK, DU1_DG3_MARK,
- SSI_SCK1_B_MARK,
- HSCIF1_HRTS_N_MARK, SCIFA4_TXD_MARK, IERX_MARK, DU1_DG4_MARK,
- SSI_WS1_B_MARK,
+ HSCIF1_HSCK_MARK, PWM2_MARK, IETX_MARK /* R8A7794 only */,
+ DU1_DG2_MARK, REMOCON_B_MARK /* R8A7794 only */,
+ SPEEDIN_B_MARK /* R8A7794 only */,
+ HSCIF1_HCTS_N_MARK, SCIFA4_RXD_MARK, IECLK_MARK /* R8A7794 only */,
+ DU1_DG3_MARK, SSI_SCK1_B_MARK,
+ HSCIF1_HRTS_N_MARK, SCIFA4_TXD_MARK, IERX_MARK /* R8A7794 only */,
+ DU1_DG4_MARK, SSI_WS1_B_MARK,
SCIF1_SCK_MARK, PWM3_MARK, TCLK2_MARK, DU1_DG5_MARK, SSI_SDATA1_B_MARK,
- CAN_TXCLK_MARK,
+ CAN_TXCLK_MARK /* R8A7794 only */,
/* IPSR10 */
SCIF1_RXD_MARK, I2C5_SCL_MARK, DU1_DG6_MARK, SSI_SCK2_B_MARK,
@@ -600,12 +640,12 @@ enum {
SCIF2_RXD_MARK, IIC0_SCL_MARK, DU1_DB0_MARK, SSI_SDATA2_B_MARK,
SCIF2_TXD_MARK, IIC0_SDA_MARK, DU1_DB1_MARK, SSI_SCK9_B_MARK,
SCIF2_SCK_MARK, IRQ1_MARK, DU1_DB2_MARK, SSI_WS9_B_MARK,
- SCIF3_SCK_MARK, IRQ2_MARK, BPFCLK_D_MARK, DU1_DB3_MARK,
- SSI_SDATA9_B_MARK,
- SCIF3_RXD_MARK, I2C1_SCL_E_MARK, FMCLK_D_MARK, DU1_DB4_MARK,
- AUDIO_CLKA_C_MARK, SSI_SCK4_B_MARK,
- SCIF3_TXD_MARK, I2C1_SDA_E_MARK, FMIN_D_MARK, DU1_DB5_MARK,
- AUDIO_CLKB_C_MARK, SSI_WS4_B_MARK,
+ SCIF3_SCK_MARK, IRQ2_MARK, BPFCLK_D_MARK /* R8A7794 only */,
+ DU1_DB3_MARK, SSI_SDATA9_B_MARK,
+ SCIF3_RXD_MARK, I2C1_SCL_E_MARK, FMCLK_D_MARK /* R8A7794 only */,
+ DU1_DB4_MARK, AUDIO_CLKA_C_MARK, SSI_SCK4_B_MARK,
+ SCIF3_TXD_MARK, I2C1_SDA_E_MARK, FMIN_D_MARK /* R8A7794 only */,
+ DU1_DB5_MARK, AUDIO_CLKB_C_MARK, SSI_WS4_B_MARK,
I2C2_SCL_MARK, SCIFA5_RXD_MARK, DU1_DB6_MARK, AUDIO_CLKC_C_MARK,
SSI_SDATA4_B_MARK,
I2C2_SDA_MARK, SCIFA5_TXD_MARK, DU1_DB7_MARK, AUDIO_CLKOUT_C_MARK,
@@ -623,22 +663,28 @@ enum {
SSI_WS78_MARK, SCIFA2_RXD_B_MARK, I2C5_SCL_C_MARK, DU1_CDE_MARK,
SSI_SDATA7_MARK, SCIFA2_TXD_B_MARK, IRQ8_MARK, AUDIO_CLKA_D_MARK,
CAN_CLK_D_MARK,
- SSI_SCK0129_MARK, MSIOF1_RXD_B_MARK, SCIF5_RXD_D_MARK, ADIDATA_B_MARK,
- SSI_WS0129_MARK, MSIOF1_TXD_B_MARK, SCIF5_TXD_D_MARK, ADICS_SAMP_B_MARK,
- SSI_SDATA0_MARK, MSIOF1_SCK_B_MARK, PWM0_B_MARK, ADICLK_B_MARK,
+ SSI_SCK0129_MARK, MSIOF1_RXD_B_MARK, SCIF5_RXD_D_MARK,
+ ADIDATA_B_MARK /* R8A7794 only */,
+ SSI_WS0129_MARK, MSIOF1_TXD_B_MARK, SCIF5_TXD_D_MARK,
+ ADICS_SAMP_B_MARK /* R8A7794 only */,
+ SSI_SDATA0_MARK, MSIOF1_SCK_B_MARK, PWM0_B_MARK,
+ ADICLK_B_MARK /* R8A7794 only */,
/* IPSR12 */
- SSI_SCK34_MARK, MSIOF1_SYNC_B_MARK, SCIFA1_SCK_C_MARK, ADICHS0_B_MARK,
- DREQ1_N_B_MARK,
- SSI_WS34_MARK, MSIOF1_SS1_B_MARK, SCIFA1_RXD_C_MARK, ADICHS1_B_MARK,
- CAN1_RX_C_MARK, DACK1_B_MARK,
- SSI_SDATA3_MARK, MSIOF1_SS2_B_MARK, SCIFA1_TXD_C_MARK, ADICHS2_B_MARK,
- CAN1_TX_C_MARK, DREQ2_N_MARK,
- SSI_SCK4_MARK, MLB_CLK_MARK, IETX_B_MARK,
- SSI_WS4_MARK, MLB_SIG_MARK, IECLK_B_MARK,
- SSI_SDATA4_MARK, MLB_DAT_MARK, IERX_B_MARK,
- SSI_SDATA8_MARK, SCIF1_SCK_B_MARK, PWM1_B_MARK, IRQ9_MARK, REMOCON_MARK,
- DACK2_MARK, ETH_MDIO_B_MARK,
+ SSI_SCK34_MARK, MSIOF1_SYNC_B_MARK, SCIFA1_SCK_C_MARK,
+ ADICHS0_B_MARK /* R8A7794 only */, DREQ1_N_B_MARK,
+ SSI_WS34_MARK, MSIOF1_SS1_B_MARK, SCIFA1_RXD_C_MARK,
+ ADICHS1_B_MARK /* R8A7794 only */, CAN1_RX_C_MARK, DACK1_B_MARK,
+ SSI_SDATA3_MARK, MSIOF1_SS2_B_MARK, SCIFA1_TXD_C_MARK,
+ ADICHS2_B_MARK /* R8A7794 only */, CAN1_TX_C_MARK, DREQ2_N_MARK,
+ SSI_SCK4_MARK, MLB_CLK_MARK /* R8A7794 only */,
+ IETX_B_MARK /* R8A7794 only */,
+ SSI_WS4_MARK, MLB_SIG_MARK /* R8A7794 only */,
+ IECLK_B_MARK /* R8A7794 only */,
+ SSI_SDATA4_MARK, MLB_DAT_MARK /* R8A7794 only */,
+ IERX_B_MARK /* R8A7794 only */,
+ SSI_SDATA8_MARK, SCIF1_SCK_B_MARK, PWM1_B_MARK, IRQ9_MARK,
+ REMOCON_MARK /* R8A7794 only */, DACK2_MARK, ETH_MDIO_B_MARK,
SSI_SCK1_MARK, SCIF1_RXD_B_MARK, IIC0_SCL_C_MARK, VI1_CLK_MARK,
CAN0_RX_D_MARK, ETH_CRS_DV_B_MARK,
SSI_WS1_MARK, SCIF1_TXD_B_MARK, IIC0_SDA_C_MARK, VI1_DATA0_MARK,
@@ -660,13 +706,14 @@ enum {
SSI_SDATA9_MARK, SCIF2_TXD_B_MARK, I2C3_SDA_E_MARK, VI1_DATA7_MARK,
ATADIR0_N_MARK, ETH_MAGIC_B_MARK,
AUDIO_CLKA_MARK, I2C0_SCL_B_MARK, SCIFA4_RXD_D_MARK, VI1_CLKENB_MARK,
- TS_SDATA_C_MARK, ETH_TXD0_B_MARK,
+ TS_SDATA_C_MARK /* R8A7794 only */, ETH_TXD0_B_MARK,
AUDIO_CLKB_MARK, I2C0_SDA_B_MARK, SCIFA4_TXD_D_MARK, VI1_FIELD_MARK,
- TS_SCK_C_MARK, BPFCLK_E_MARK, ETH_MDC_B_MARK,
+ TS_SCK_C_MARK /* R8A7794 only */, BPFCLK_E_MARK /* R8A7794 only */,
+ ETH_MDC_B_MARK,
AUDIO_CLKC_MARK, I2C4_SCL_B_MARK, SCIFA5_RXD_D_MARK, VI1_HSYNC_N_MARK,
- TS_SDEN_C_MARK, FMCLK_E_MARK,
+ TS_SDEN_C_MARK /* R8A7794 only */, FMCLK_E_MARK /* R8A7794 only */,
AUDIO_CLKOUT_MARK, I2C4_SDA_B_MARK, SCIFA5_TXD_D_MARK, VI1_VSYNC_N_MARK,
- TS_SPSYNC_C_MARK, FMIN_E_MARK,
+ TS_SPSYNC_C_MARK /* R8A7794 only */, FMIN_E_MARK /* R8A7794 only */,
PINMUX_MARK_END,
};
@@ -831,7 +878,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_GPSR(IP2_20_18, A16),
PINMUX_IPSR_MSEL(IP2_20_18, MSIOF2_SCK, SEL_MSI2_0),
PINMUX_IPSR_MSEL(IP2_20_18, HSCIF0_HSCK_B, SEL_HSCIF0_1),
- PINMUX_IPSR_MSEL(IP2_20_18, SPEEDIN, SEL_RSP_0),
+ PINMUX_IPSR_MSEL(IP2_20_18, SPEEDIN, SEL_RSP_0), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP2_20_18, CAN_CLK_C, SEL_CAN_2),
PINMUX_IPSR_GPSR(IP2_20_18, TPUTO2_B),
PINMUX_IPSR_GPSR(IP2_23_21, A17),
@@ -877,26 +924,26 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_GPSR(IP3_17_15, EX_CS2_N),
PINMUX_IPSR_GPSR(IP3_17_15, PWM0),
PINMUX_IPSR_MSEL(IP3_17_15, SCIF4_RXD_C, SEL_SCIF4_2),
- PINMUX_IPSR_MSEL(IP3_17_15, TS_SDATA_B, SEL_TSIF0_1),
+ PINMUX_IPSR_MSEL(IP3_17_15, TS_SDATA_B, SEL_TSIF0_1), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP3_17_15, TPUTO3),
PINMUX_IPSR_GPSR(IP3_17_15, SCIFB2_TXD),
PINMUX_IPSR_GPSR(IP3_20_18, EX_CS3_N),
PINMUX_IPSR_MSEL(IP3_20_18, SCIFA2_SCK, SEL_SCIFA2_0),
PINMUX_IPSR_MSEL(IP3_20_18, SCIF4_TXD_C, SEL_SCIF4_2),
- PINMUX_IPSR_MSEL(IP3_20_18, TS_SCK_B, SEL_TSIF0_1),
- PINMUX_IPSR_MSEL(IP3_20_18, BPFCLK, SEL_DARC_0),
+ PINMUX_IPSR_MSEL(IP3_20_18, TS_SCK_B, SEL_TSIF0_1), /* R8A7794 only */
+ PINMUX_IPSR_MSEL(IP3_20_18, BPFCLK, SEL_DARC_0), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP3_20_18, SCIFB2_SCK),
PINMUX_IPSR_GPSR(IP3_23_21, EX_CS4_N),
PINMUX_IPSR_MSEL(IP3_23_21, SCIFA2_RXD, SEL_SCIFA2_0),
PINMUX_IPSR_MSEL(IP3_23_21, I2C2_SCL_E, SEL_I2C02_4),
- PINMUX_IPSR_MSEL(IP3_23_21, TS_SDEN_B, SEL_TSIF0_1),
- PINMUX_IPSR_MSEL(IP3_23_21, FMCLK, SEL_DARC_0),
+ PINMUX_IPSR_MSEL(IP3_23_21, TS_SDEN_B, SEL_TSIF0_1), /* R8A7794 only */
+ PINMUX_IPSR_MSEL(IP3_23_21, FMCLK, SEL_DARC_0), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP3_23_21, SCIFB2_CTS_N),
PINMUX_IPSR_GPSR(IP3_26_24, EX_CS5_N),
PINMUX_IPSR_MSEL(IP3_26_24, SCIFA2_TXD, SEL_SCIFA2_0),
PINMUX_IPSR_MSEL(IP3_26_24, I2C2_SDA_E, SEL_I2C02_4),
- PINMUX_IPSR_MSEL(IP3_26_24, TS_SPSYNC_B, SEL_TSIF0_1),
- PINMUX_IPSR_MSEL(IP3_26_24, FMIN, SEL_DARC_0),
+ PINMUX_IPSR_MSEL(IP3_26_24, TS_SPSYNC_B, SEL_TSIF0_1), /* R8A7794 */
+ PINMUX_IPSR_MSEL(IP3_26_24, FMIN, SEL_DARC_0), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP3_26_24, SCIFB2_RTS_N),
PINMUX_IPSR_GPSR(IP3_29_27, BS_N),
PINMUX_IPSR_GPSR(IP3_29_27, DRACK0),
@@ -913,87 +960,87 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP4_1_0, CAN_CLK_B, SEL_CAN_1),
PINMUX_IPSR_MSEL(IP4_1_0, SCIF_CLK, SEL_SCIF0_0),
PINMUX_IPSR_GPSR(IP4_4_2, DU0_DR0),
- PINMUX_IPSR_GPSR(IP4_4_2, LCDOUT16),
+ PINMUX_IPSR_GPSR(IP4_4_2, LCDOUT16), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP4_4_2, SCIF5_RXD_C, SEL_SCIF5_2),
PINMUX_IPSR_MSEL(IP4_4_2, I2C2_SCL_D, SEL_I2C02_3),
PINMUX_IPSR_GPSR(IP4_7_5, DU0_DR1),
- PINMUX_IPSR_GPSR(IP4_7_5, LCDOUT17),
+ PINMUX_IPSR_GPSR(IP4_7_5, LCDOUT17), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP4_7_5, SCIF5_TXD_C, SEL_SCIF5_2),
PINMUX_IPSR_MSEL(IP4_7_5, I2C2_SDA_D, SEL_I2C02_3),
PINMUX_IPSR_GPSR(IP4_9_8, DU0_DR2),
- PINMUX_IPSR_GPSR(IP4_9_8, LCDOUT18),
+ PINMUX_IPSR_GPSR(IP4_9_8, LCDOUT18), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP4_11_10, DU0_DR3),
- PINMUX_IPSR_GPSR(IP4_11_10, LCDOUT19),
+ PINMUX_IPSR_GPSR(IP4_11_10, LCDOUT19), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP4_13_12, DU0_DR4),
- PINMUX_IPSR_GPSR(IP4_13_12, LCDOUT20),
+ PINMUX_IPSR_GPSR(IP4_13_12, LCDOUT20), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP4_15_14, DU0_DR5),
- PINMUX_IPSR_GPSR(IP4_15_14, LCDOUT21),
+ PINMUX_IPSR_GPSR(IP4_15_14, LCDOUT21), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP4_17_16, DU0_DR6),
- PINMUX_IPSR_GPSR(IP4_17_16, LCDOUT22),
+ PINMUX_IPSR_GPSR(IP4_17_16, LCDOUT22), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP4_19_18, DU0_DR7),
- PINMUX_IPSR_GPSR(IP4_19_18, LCDOUT23),
+ PINMUX_IPSR_GPSR(IP4_19_18, LCDOUT23), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP4_22_20, DU0_DG0),
- PINMUX_IPSR_GPSR(IP4_22_20, LCDOUT8),
+ PINMUX_IPSR_GPSR(IP4_22_20, LCDOUT8), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP4_22_20, SCIFA0_RXD_C, SEL_SCIFA0_2),
PINMUX_IPSR_MSEL(IP4_22_20, I2C3_SCL_D, SEL_I2C03_3),
PINMUX_IPSR_GPSR(IP4_25_23, DU0_DG1),
- PINMUX_IPSR_GPSR(IP4_25_23, LCDOUT9),
+ PINMUX_IPSR_GPSR(IP4_25_23, LCDOUT9), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP4_25_23, SCIFA0_TXD_C, SEL_SCIFA0_2),
PINMUX_IPSR_MSEL(IP4_25_23, I2C3_SDA_D, SEL_I2C03_3),
PINMUX_IPSR_GPSR(IP4_27_26, DU0_DG2),
- PINMUX_IPSR_GPSR(IP4_27_26, LCDOUT10),
+ PINMUX_IPSR_GPSR(IP4_27_26, LCDOUT10), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP4_29_28, DU0_DG3),
- PINMUX_IPSR_GPSR(IP4_29_28, LCDOUT11),
+ PINMUX_IPSR_GPSR(IP4_29_28, LCDOUT11), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP4_31_30, DU0_DG4),
- PINMUX_IPSR_GPSR(IP4_31_30, LCDOUT12),
+ PINMUX_IPSR_GPSR(IP4_31_30, LCDOUT12), /* R8A7794 only */
/* IPSR5 */
PINMUX_IPSR_GPSR(IP5_1_0, DU0_DG5),
- PINMUX_IPSR_GPSR(IP5_1_0, LCDOUT13),
+ PINMUX_IPSR_GPSR(IP5_1_0, LCDOUT13), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP5_3_2, DU0_DG6),
- PINMUX_IPSR_GPSR(IP5_3_2, LCDOUT14),
+ PINMUX_IPSR_GPSR(IP5_3_2, LCDOUT14), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP5_5_4, DU0_DG7),
- PINMUX_IPSR_GPSR(IP5_5_4, LCDOUT15),
+ PINMUX_IPSR_GPSR(IP5_5_4, LCDOUT15), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP5_8_6, DU0_DB0),
- PINMUX_IPSR_GPSR(IP5_8_6, LCDOUT0),
+ PINMUX_IPSR_GPSR(IP5_8_6, LCDOUT0), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP5_8_6, SCIFA4_RXD_C, SEL_SCIFA4_2),
PINMUX_IPSR_MSEL(IP5_8_6, I2C4_SCL_D, SEL_I2C04_3),
PINMUX_IPSR_MSEL(IP7_8_6, CAN0_RX_C, SEL_CAN0_2),
PINMUX_IPSR_GPSR(IP5_11_9, DU0_DB1),
- PINMUX_IPSR_GPSR(IP5_11_9, LCDOUT1),
+ PINMUX_IPSR_GPSR(IP5_11_9, LCDOUT1), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP5_11_9, SCIFA4_TXD_C, SEL_SCIFA4_2),
PINMUX_IPSR_MSEL(IP5_11_9, I2C4_SDA_D, SEL_I2C04_3),
PINMUX_IPSR_MSEL(IP5_11_9, CAN0_TX_C, SEL_CAN0_2),
PINMUX_IPSR_GPSR(IP5_13_12, DU0_DB2),
- PINMUX_IPSR_GPSR(IP5_13_12, LCDOUT2),
+ PINMUX_IPSR_GPSR(IP5_13_12, LCDOUT2), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP5_15_14, DU0_DB3),
- PINMUX_IPSR_GPSR(IP5_15_14, LCDOUT3),
+ PINMUX_IPSR_GPSR(IP5_15_14, LCDOUT3), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP5_17_16, DU0_DB4),
- PINMUX_IPSR_GPSR(IP5_17_16, LCDOUT4),
+ PINMUX_IPSR_GPSR(IP5_17_16, LCDOUT4), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP5_19_18, DU0_DB5),
- PINMUX_IPSR_GPSR(IP5_19_18, LCDOUT5),
+ PINMUX_IPSR_GPSR(IP5_19_18, LCDOUT5), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP5_21_20, DU0_DB6),
- PINMUX_IPSR_GPSR(IP5_21_20, LCDOUT6),
+ PINMUX_IPSR_GPSR(IP5_21_20, LCDOUT6), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP5_23_22, DU0_DB7),
- PINMUX_IPSR_GPSR(IP5_23_22, LCDOUT7),
+ PINMUX_IPSR_GPSR(IP5_23_22, LCDOUT7), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP5_25_24, DU0_DOTCLKIN),
- PINMUX_IPSR_GPSR(IP5_25_24, QSTVA_QVS),
+ PINMUX_IPSR_GPSR(IP5_25_24, QSTVA_QVS), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP5_27_26, DU0_DOTCLKOUT0),
- PINMUX_IPSR_GPSR(IP5_27_26, QCLK),
+ PINMUX_IPSR_GPSR(IP5_27_26, QCLK), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP5_29_28, DU0_DOTCLKOUT1),
- PINMUX_IPSR_GPSR(IP5_29_28, QSTVB_QVE),
+ PINMUX_IPSR_GPSR(IP5_29_28, QSTVB_QVE), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP5_31_30, DU0_EXHSYNC_DU0_HSYNC),
- PINMUX_IPSR_GPSR(IP5_31_30, QSTH_QHS),
+ PINMUX_IPSR_GPSR(IP5_31_30, QSTH_QHS), /* R8A7794 only */
/* IPSR6 */
PINMUX_IPSR_GPSR(IP6_1_0, DU0_EXVSYNC_DU0_VSYNC),
- PINMUX_IPSR_GPSR(IP6_1_0, QSTB_QHE),
+ PINMUX_IPSR_GPSR(IP6_1_0, QSTB_QHE), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP6_3_2, DU0_EXODDF_DU0_ODDF_DISP_CDE),
- PINMUX_IPSR_GPSR(IP6_3_2, QCPV_QDE),
+ PINMUX_IPSR_GPSR(IP6_3_2, QCPV_QDE), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP6_5_4, DU0_DISP),
- PINMUX_IPSR_GPSR(IP6_5_4, QPOLA),
+ PINMUX_IPSR_GPSR(IP6_5_4, QPOLA), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP6_7_6, DU0_CDE),
- PINMUX_IPSR_GPSR(IP6_7_6, QPOLB),
+ PINMUX_IPSR_GPSR(IP6_7_6, QPOLB), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP6_8, VI0_CLK),
PINMUX_IPSR_GPSR(IP6_8, AVB_RX_CLK),
PINMUX_IPSR_GPSR(IP6_9, VI0_DATA0_VI0_B0),
@@ -1015,17 +1062,17 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_GPSR(IP6_19_17, VI0_CLKENB),
PINMUX_IPSR_MSEL(IP6_19_17, I2C3_SCL, SEL_I2C03_0),
PINMUX_IPSR_MSEL(IP6_19_17, SCIFA5_RXD_C, SEL_SCIFA5_2),
- PINMUX_IPSR_MSEL(IP6_19_17, IETX_C, SEL_IEB_2),
+ PINMUX_IPSR_MSEL(IP6_19_17, IETX_C, SEL_IEB_2), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP6_19_17, AVB_RXD7),
PINMUX_IPSR_GPSR(IP6_22_20, VI0_FIELD),
PINMUX_IPSR_MSEL(IP6_22_20, I2C3_SDA, SEL_I2C03_0),
PINMUX_IPSR_MSEL(IP6_22_20, SCIFA5_TXD_C, SEL_SCIFA5_2),
- PINMUX_IPSR_MSEL(IP6_22_20, IECLK_C, SEL_IEB_2),
+ PINMUX_IPSR_MSEL(IP6_22_20, IECLK_C, SEL_IEB_2), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP6_22_20, AVB_RX_ER),
PINMUX_IPSR_GPSR(IP6_25_23, VI0_HSYNC_N),
PINMUX_IPSR_MSEL(IP6_25_23, SCIF0_RXD_B, SEL_SCIF0_1),
PINMUX_IPSR_MSEL(IP6_25_23, I2C0_SCL_C, SEL_I2C00_2),
- PINMUX_IPSR_MSEL(IP6_25_23, IERX_C, SEL_IEB_2),
+ PINMUX_IPSR_MSEL(IP6_25_23, IERX_C, SEL_IEB_2), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP6_25_23, AVB_COL),
PINMUX_IPSR_GPSR(IP6_28_26, VI0_VSYNC_N),
PINMUX_IPSR_MSEL(IP6_28_26, SCIF0_TXD_B, SEL_SCIF0_1),
@@ -1037,7 +1084,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP6_31_29, MSIOF2_RXD_B, SEL_MSI2_1),
PINMUX_IPSR_MSEL(IP6_31_29, I2C5_SCL_D, SEL_I2C05_3),
PINMUX_IPSR_GPSR(IP6_31_29, AVB_TX_CLK),
- PINMUX_IPSR_MSEL(IP6_31_29, ADIDATA, SEL_RAD_0),
+ PINMUX_IPSR_MSEL(IP6_31_29, ADIDATA, SEL_RAD_0), /* R8A7794 only */
/* IPSR7 */
PINMUX_IPSR_MSEL(IP7_2_0, ETH_CRS_DV, SEL_ETH_0),
@@ -1045,7 +1092,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP7_2_0, MSIOF2_TXD_B, SEL_MSI2_1),
PINMUX_IPSR_MSEL(IP7_2_0, I2C5_SDA_D, SEL_I2C05_3),
PINMUX_IPSR_GPSR(IP7_2_0, AVB_TXD0),
- PINMUX_IPSR_MSEL(IP7_2_0, ADICS_SAMP, SEL_RAD_0),
+ PINMUX_IPSR_MSEL(IP7_2_0, ADICS_SAMP, SEL_RAD_0), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP7_5_3, ETH_RX_ER, SEL_ETH_0),
PINMUX_IPSR_GPSR(IP7_5_3, VI0_G2),
PINMUX_IPSR_MSEL(IP7_5_3, MSIOF2_SCK_B, SEL_MSI2_1),
@@ -1057,19 +1104,19 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP7_8_6, MSIOF2_SYNC_B, SEL_MSI2_1),
PINMUX_IPSR_MSEL(IP7_8_6, CAN0_TX_B, SEL_CAN0_1),
PINMUX_IPSR_GPSR(IP7_8_6, AVB_TXD2),
- PINMUX_IPSR_MSEL(IP7_8_6, ADICHS0, SEL_RAD_0),
+ PINMUX_IPSR_MSEL(IP7_8_6, ADICHS0, SEL_RAD_0), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP7_11_9, ETH_RXD1, SEL_ETH_0),
PINMUX_IPSR_GPSR(IP7_11_9, VI0_G4),
PINMUX_IPSR_MSEL(IP7_11_9, MSIOF2_SS1_B, SEL_MSI2_1),
PINMUX_IPSR_MSEL(IP7_11_9, SCIF4_RXD_D, SEL_SCIF4_3),
PINMUX_IPSR_GPSR(IP7_11_9, AVB_TXD3),
- PINMUX_IPSR_MSEL(IP7_11_9, ADICHS1, SEL_RAD_0),
+ PINMUX_IPSR_MSEL(IP7_11_9, ADICHS1, SEL_RAD_0), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP7_14_12, ETH_LINK, SEL_ETH_0),
PINMUX_IPSR_GPSR(IP7_14_12, VI0_G5),
PINMUX_IPSR_MSEL(IP7_14_12, MSIOF2_SS2_B, SEL_MSI2_1),
PINMUX_IPSR_MSEL(IP7_14_12, SCIF4_TXD_D, SEL_SCIF4_3),
PINMUX_IPSR_GPSR(IP7_14_12, AVB_TXD4),
- PINMUX_IPSR_MSEL(IP7_14_12, ADICHS2, SEL_RAD_0),
+ PINMUX_IPSR_MSEL(IP7_14_12, ADICHS2, SEL_RAD_0), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP7_17_15, ETH_REFCLK, SEL_ETH_0),
PINMUX_IPSR_GPSR(IP7_17_15, VI0_G6),
PINMUX_IPSR_MSEL(IP7_17_15, SCIF2_SCK_C, SEL_SCIF2_2),
@@ -1153,48 +1200,48 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP8_25_23, SCIF4_RXD, SEL_SCIF4_0),
PINMUX_IPSR_GPSR(IP8_25_23, PWM5_B),
PINMUX_IPSR_GPSR(IP8_25_23, DU1_DR0),
- PINMUX_IPSR_MSEL(IP8_25_23, TS_SDATA_D, SEL_TSIF0_3),
+ PINMUX_IPSR_MSEL(IP8_25_23, TS_SDATA_D, SEL_TSIF0_3), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP8_25_23, TPUTO1_B),
PINMUX_IPSR_MSEL(IP8_28_26, I2C1_SDA, SEL_I2C01_0),
PINMUX_IPSR_MSEL(IP8_28_26, SCIF4_TXD, SEL_SCIF4_0),
PINMUX_IPSR_GPSR(IP8_28_26, IRQ5),
PINMUX_IPSR_GPSR(IP8_28_26, DU1_DR1),
- PINMUX_IPSR_MSEL(IP8_28_26, TS_SCK_D, SEL_TSIF0_3),
- PINMUX_IPSR_MSEL(IP8_28_26, BPFCLK_C, SEL_DARC_2),
+ PINMUX_IPSR_MSEL(IP8_28_26, TS_SCK_D, SEL_TSIF0_3), /* R8A7794 only */
+ PINMUX_IPSR_MSEL(IP8_28_26, BPFCLK_C, SEL_DARC_2), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP8_31_29, MSIOF0_RXD),
PINMUX_IPSR_MSEL(IP8_31_29, SCIF5_RXD, SEL_SCIF5_0),
PINMUX_IPSR_MSEL(IP8_31_29, I2C2_SCL_C, SEL_I2C02_2),
PINMUX_IPSR_GPSR(IP8_31_29, DU1_DR2),
- PINMUX_IPSR_MSEL(IP8_31_29, TS_SDEN_D, SEL_TSIF0_3),
- PINMUX_IPSR_MSEL(IP8_31_29, FMCLK_C, SEL_DARC_2),
+ PINMUX_IPSR_MSEL(IP8_31_29, TS_SDEN_D, SEL_TSIF0_3), /* R8A7794 only */
+ PINMUX_IPSR_MSEL(IP8_31_29, FMCLK_C, SEL_DARC_2), /* R8A7794 only */
/* IPSR9 */
PINMUX_IPSR_GPSR(IP9_2_0, MSIOF0_TXD),
PINMUX_IPSR_MSEL(IP9_2_0, SCIF5_TXD, SEL_SCIF5_0),
PINMUX_IPSR_MSEL(IP9_2_0, I2C2_SDA_C, SEL_I2C02_2),
PINMUX_IPSR_GPSR(IP9_2_0, DU1_DR3),
- PINMUX_IPSR_MSEL(IP9_2_0, TS_SPSYNC_D, SEL_TSIF0_3),
- PINMUX_IPSR_MSEL(IP9_2_0, FMIN_C, SEL_DARC_2),
+ PINMUX_IPSR_MSEL(IP9_2_0, TS_SPSYNC_D, SEL_TSIF0_3), /* R8A7794 only */
+ PINMUX_IPSR_MSEL(IP9_2_0, FMIN_C, SEL_DARC_2), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP9_5_3, MSIOF0_SCK),
PINMUX_IPSR_GPSR(IP9_5_3, IRQ0),
- PINMUX_IPSR_MSEL(IP9_5_3, TS_SDATA, SEL_TSIF0_0),
+ PINMUX_IPSR_MSEL(IP9_5_3, TS_SDATA, SEL_TSIF0_0), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP9_5_3, DU1_DR4),
PINMUX_IPSR_GPSR(IP9_5_3, TPUTO1_C),
PINMUX_IPSR_GPSR(IP9_8_6, MSIOF0_SYNC),
PINMUX_IPSR_GPSR(IP9_8_6, PWM1),
- PINMUX_IPSR_MSEL(IP9_8_6, TS_SCK, SEL_TSIF0_0),
+ PINMUX_IPSR_MSEL(IP9_8_6, TS_SCK, SEL_TSIF0_0), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP9_8_6, DU1_DR5),
- PINMUX_IPSR_MSEL(IP9_8_6, BPFCLK_B, SEL_DARC_1),
+ PINMUX_IPSR_MSEL(IP9_8_6, BPFCLK_B, SEL_DARC_1), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP9_11_9, MSIOF0_SS1),
PINMUX_IPSR_MSEL(IP9_11_9, SCIFA0_RXD, SEL_SCIFA0_0),
- PINMUX_IPSR_MSEL(IP9_11_9, TS_SDEN, SEL_TSIF0_0),
+ PINMUX_IPSR_MSEL(IP9_11_9, TS_SDEN, SEL_TSIF0_0), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP9_11_9, DU1_DR6),
- PINMUX_IPSR_MSEL(IP9_11_9, FMCLK_B, SEL_DARC_1),
+ PINMUX_IPSR_MSEL(IP9_11_9, FMCLK_B, SEL_DARC_1), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP9_14_12, MSIOF0_SS2),
PINMUX_IPSR_MSEL(IP9_14_12, SCIFA0_TXD, SEL_SCIFA0_0),
- PINMUX_IPSR_MSEL(IP9_14_12, TS_SPSYNC, SEL_TSIF0_0),
+ PINMUX_IPSR_MSEL(IP9_14_12, TS_SPSYNC, SEL_TSIF0_0), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP9_14_12, DU1_DR7),
- PINMUX_IPSR_MSEL(IP9_14_12, FMIN_B, SEL_DARC_1),
+ PINMUX_IPSR_MSEL(IP9_14_12, FMIN_B, SEL_DARC_1), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP9_16_15, HSCIF1_HRX, SEL_HSCIF1_0),
PINMUX_IPSR_MSEL(IP9_16_15, I2C4_SCL, SEL_I2C04_0),
PINMUX_IPSR_GPSR(IP9_16_15, PWM6),
@@ -1205,18 +1252,18 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_GPSR(IP9_18_17, DU1_DG1),
PINMUX_IPSR_GPSR(IP9_21_19, HSCIF1_HSCK),
PINMUX_IPSR_GPSR(IP9_21_19, PWM2),
- PINMUX_IPSR_MSEL(IP9_21_19, IETX, SEL_IEB_0),
+ PINMUX_IPSR_MSEL(IP9_21_19, IETX, SEL_IEB_0), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP9_21_19, DU1_DG2),
- PINMUX_IPSR_MSEL(IP9_21_19, REMOCON_B, SEL_RCN_1),
- PINMUX_IPSR_MSEL(IP9_21_19, SPEEDIN_B, SEL_RSP_1),
+ PINMUX_IPSR_MSEL(IP9_21_19, REMOCON_B, SEL_RCN_1), /* R8A7794 only */
+ PINMUX_IPSR_MSEL(IP9_21_19, SPEEDIN_B, SEL_RSP_1), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP9_24_22, HSCIF1_HCTS_N, SEL_HSCIF1_0),
PINMUX_IPSR_MSEL(IP9_24_22, SCIFA4_RXD, SEL_SCIFA4_0),
- PINMUX_IPSR_MSEL(IP9_24_22, IECLK, SEL_IEB_0),
+ PINMUX_IPSR_MSEL(IP9_24_22, IECLK, SEL_IEB_0), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP9_24_22, DU1_DG3),
PINMUX_IPSR_MSEL(IP9_24_22, SSI_SCK1_B, SEL_SSI1_1),
PINMUX_IPSR_MSEL(IP9_27_25, HSCIF1_HRTS_N, SEL_HSCIF1_0),
PINMUX_IPSR_MSEL(IP9_27_25, SCIFA4_TXD, SEL_SCIFA4_0),
- PINMUX_IPSR_MSEL(IP9_27_25, IERX, SEL_IEB_0),
+ PINMUX_IPSR_MSEL(IP9_27_25, IERX, SEL_IEB_0), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP9_27_25, DU1_DG4),
PINMUX_IPSR_MSEL(IP9_27_25, SSI_WS1_B, SEL_SSI1_1),
PINMUX_IPSR_MSEL(IP9_30_28, SCIF1_SCK, SEL_SCIF1_0),
@@ -1248,18 +1295,18 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP10_14_12, SSI_WS9_B, SEL_SSI9_1),
PINMUX_IPSR_MSEL(IP10_17_15, SCIF3_SCK, SEL_SCIF3_0),
PINMUX_IPSR_GPSR(IP10_17_15, IRQ2),
- PINMUX_IPSR_MSEL(IP10_17_15, BPFCLK_D, SEL_DARC_3),
+ PINMUX_IPSR_MSEL(IP10_17_15, BPFCLK_D, SEL_DARC_3), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP10_17_15, DU1_DB3),
PINMUX_IPSR_MSEL(IP10_17_15, SSI_SDATA9_B, SEL_SSI9_1),
PINMUX_IPSR_MSEL(IP10_20_18, SCIF3_RXD, SEL_SCIF3_0),
PINMUX_IPSR_MSEL(IP10_20_18, I2C1_SCL_E, SEL_I2C01_4),
- PINMUX_IPSR_MSEL(IP10_20_18, FMCLK_D, SEL_DARC_3),
+ PINMUX_IPSR_MSEL(IP10_20_18, FMCLK_D, SEL_DARC_3), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP10_20_18, DU1_DB4),
PINMUX_IPSR_MSEL(IP10_20_18, AUDIO_CLKA_C, SEL_ADG_2),
PINMUX_IPSR_MSEL(IP10_20_18, SSI_SCK4_B, SEL_SSI4_1),
PINMUX_IPSR_MSEL(IP10_23_21, SCIF3_TXD, SEL_SCIF3_0),
PINMUX_IPSR_MSEL(IP10_23_21, I2C1_SDA_E, SEL_I2C01_4),
- PINMUX_IPSR_MSEL(IP10_23_21, FMIN_D, SEL_DARC_3),
+ PINMUX_IPSR_MSEL(IP10_23_21, FMIN_D, SEL_DARC_3), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP10_23_21, DU1_DB5),
PINMUX_IPSR_MSEL(IP10_23_21, AUDIO_CLKB_C, SEL_ADG_2),
PINMUX_IPSR_MSEL(IP10_23_21, SSI_WS4_B, SEL_SSI4_1),
@@ -1312,48 +1359,48 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_GPSR(IP11_23_21, SSI_SCK0129),
PINMUX_IPSR_MSEL(IP11_23_21, MSIOF1_RXD_B, SEL_MSI1_1),
PINMUX_IPSR_MSEL(IP11_23_21, SCIF5_RXD_D, SEL_SCIF5_3),
- PINMUX_IPSR_MSEL(IP11_23_21, ADIDATA_B, SEL_RAD_1),
+ PINMUX_IPSR_MSEL(IP11_23_21, ADIDATA_B, SEL_RAD_1), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP11_26_24, SSI_WS0129),
PINMUX_IPSR_MSEL(IP11_26_24, MSIOF1_TXD_B, SEL_MSI1_1),
PINMUX_IPSR_MSEL(IP11_26_24, SCIF5_TXD_D, SEL_SCIF5_3),
- PINMUX_IPSR_MSEL(IP11_26_24, ADICS_SAMP_B, SEL_RAD_1),
+ PINMUX_IPSR_MSEL(IP11_26_24, ADICS_SAMP_B, SEL_RAD_1), /* R8A7794 */
PINMUX_IPSR_GPSR(IP11_29_27, SSI_SDATA0),
PINMUX_IPSR_MSEL(IP11_29_27, MSIOF1_SCK_B, SEL_MSI1_1),
PINMUX_IPSR_GPSR(IP11_29_27, PWM0_B),
- PINMUX_IPSR_MSEL(IP11_29_27, ADICLK_B, SEL_RAD_1),
+ PINMUX_IPSR_MSEL(IP11_29_27, ADICLK_B, SEL_RAD_1), /* R8A7794 only */
/* IPSR12 */
PINMUX_IPSR_GPSR(IP12_2_0, SSI_SCK34),
PINMUX_IPSR_MSEL(IP12_2_0, MSIOF1_SYNC_B, SEL_MSI1_1),
PINMUX_IPSR_MSEL(IP12_2_0, SCIFA1_SCK_C, SEL_SCIFA1_2),
- PINMUX_IPSR_MSEL(IP12_2_0, ADICHS0_B, SEL_RAD_1),
+ PINMUX_IPSR_MSEL(IP12_2_0, ADICHS0_B, SEL_RAD_1), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP12_2_0, DREQ1_N_B, SEL_LBS_1),
PINMUX_IPSR_GPSR(IP12_5_3, SSI_WS34),
PINMUX_IPSR_MSEL(IP12_5_3, MSIOF1_SS1_B, SEL_MSI1_1),
PINMUX_IPSR_MSEL(IP12_5_3, SCIFA1_RXD_C, SEL_SCIFA1_2),
- PINMUX_IPSR_MSEL(IP12_5_3, ADICHS1_B, SEL_RAD_1),
+ PINMUX_IPSR_MSEL(IP12_5_3, ADICHS1_B, SEL_RAD_1), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP12_5_3, CAN1_RX_C, SEL_CAN1_2),
PINMUX_IPSR_MSEL(IP12_5_3, DACK1_B, SEL_LBS_1),
PINMUX_IPSR_GPSR(IP12_8_6, SSI_SDATA3),
PINMUX_IPSR_MSEL(IP12_8_6, MSIOF1_SS2_B, SEL_MSI1_1),
PINMUX_IPSR_MSEL(IP12_8_6, SCIFA1_TXD_C, SEL_SCIFA1_2),
- PINMUX_IPSR_MSEL(IP12_8_6, ADICHS2_B, SEL_RAD_1),
+ PINMUX_IPSR_MSEL(IP12_8_6, ADICHS2_B, SEL_RAD_1), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP12_8_6, CAN1_TX_C, SEL_CAN1_2),
PINMUX_IPSR_GPSR(IP12_8_6, DREQ2_N),
PINMUX_IPSR_MSEL(IP12_10_9, SSI_SCK4, SEL_SSI4_0),
- PINMUX_IPSR_GPSR(IP12_10_9, MLB_CLK),
- PINMUX_IPSR_MSEL(IP12_10_9, IETX_B, SEL_IEB_1),
+ PINMUX_IPSR_GPSR(IP12_10_9, MLB_CLK), /* R8A7794 only */
+ PINMUX_IPSR_MSEL(IP12_10_9, IETX_B, SEL_IEB_1), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP12_12_11, SSI_WS4, SEL_SSI4_0),
- PINMUX_IPSR_GPSR(IP12_12_11, MLB_SIG),
- PINMUX_IPSR_MSEL(IP12_12_11, IECLK_B, SEL_IEB_1),
+ PINMUX_IPSR_GPSR(IP12_12_11, MLB_SIG), /* R8A7794 only */
+ PINMUX_IPSR_MSEL(IP12_12_11, IECLK_B, SEL_IEB_1), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP12_14_13, SSI_SDATA4, SEL_SSI4_0),
- PINMUX_IPSR_GPSR(IP12_14_13, MLB_DAT),
- PINMUX_IPSR_MSEL(IP12_14_13, IERX_B, SEL_IEB_1),
+ PINMUX_IPSR_GPSR(IP12_14_13, MLB_DAT), /* R8A7794 only */
+ PINMUX_IPSR_MSEL(IP12_14_13, IERX_B, SEL_IEB_1), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP12_17_15, SSI_SDATA8, SEL_SSI8_0),
PINMUX_IPSR_MSEL(IP12_17_15, SCIF1_SCK_B, SEL_SCIF1_1),
PINMUX_IPSR_GPSR(IP12_17_15, PWM1_B),
PINMUX_IPSR_GPSR(IP12_17_15, IRQ9),
- PINMUX_IPSR_MSEL(IP12_17_15, REMOCON, SEL_RCN_0),
+ PINMUX_IPSR_MSEL(IP12_17_15, REMOCON, SEL_RCN_0), /* R8A7794 only */
PINMUX_IPSR_GPSR(IP12_17_15, DACK2),
PINMUX_IPSR_MSEL(IP12_17_15, ETH_MDIO_B, SEL_ETH_1),
PINMUX_IPSR_MSEL(IP12_20_18, SSI_SCK1, SEL_SSI1_0),
@@ -1414,27 +1461,27 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP13_17_15, I2C0_SCL_B, SEL_I2C00_1),
PINMUX_IPSR_MSEL(IP13_17_15, SCIFA4_RXD_D, SEL_SCIFA4_3),
PINMUX_IPSR_GPSR(IP13_17_15, VI1_CLKENB),
- PINMUX_IPSR_MSEL(IP13_17_15, TS_SDATA_C, SEL_TSIF0_2),
+ PINMUX_IPSR_MSEL(IP13_17_15, TS_SDATA_C, SEL_TSIF0_2), /* R8A7794 */
PINMUX_IPSR_MSEL(IP13_17_15, ETH_TXD0_B, SEL_ETH_1),
PINMUX_IPSR_MSEL(IP13_20_18, AUDIO_CLKB, SEL_ADG_0),
PINMUX_IPSR_MSEL(IP13_20_18, I2C0_SDA_B, SEL_I2C00_1),
PINMUX_IPSR_MSEL(IP13_20_18, SCIFA4_TXD_D, SEL_SCIFA4_3),
PINMUX_IPSR_GPSR(IP13_20_18, VI1_FIELD),
- PINMUX_IPSR_MSEL(IP13_20_18, TS_SCK_C, SEL_TSIF0_2),
- PINMUX_IPSR_MSEL(IP13_20_18, BPFCLK_E, SEL_DARC_4),
+ PINMUX_IPSR_MSEL(IP13_20_18, TS_SCK_C, SEL_TSIF0_2), /* R8A7794 only */
+ PINMUX_IPSR_MSEL(IP13_20_18, BPFCLK_E, SEL_DARC_4), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP13_20_18, ETH_MDC_B, SEL_ETH_1),
PINMUX_IPSR_MSEL(IP13_23_21, AUDIO_CLKC, SEL_ADG_0),
PINMUX_IPSR_MSEL(IP13_23_21, I2C4_SCL_B, SEL_I2C04_1),
PINMUX_IPSR_MSEL(IP13_23_21, SCIFA5_RXD_D, SEL_SCIFA5_3),
PINMUX_IPSR_GPSR(IP13_23_21, VI1_HSYNC_N),
- PINMUX_IPSR_MSEL(IP13_23_21, TS_SDEN_C, SEL_TSIF0_2),
- PINMUX_IPSR_MSEL(IP13_23_21, FMCLK_E, SEL_DARC_4),
+ PINMUX_IPSR_MSEL(IP13_23_21, TS_SDEN_C, SEL_TSIF0_2), /* R8A7794 only */
+ PINMUX_IPSR_MSEL(IP13_23_21, FMCLK_E, SEL_DARC_4), /* R8A7794 only */
PINMUX_IPSR_MSEL(IP13_26_24, AUDIO_CLKOUT, SEL_ADG_0),
PINMUX_IPSR_MSEL(IP13_26_24, I2C4_SDA_B, SEL_I2C04_1),
PINMUX_IPSR_MSEL(IP13_26_24, SCIFA5_TXD_D, SEL_SCIFA5_3),
PINMUX_IPSR_GPSR(IP13_26_24, VI1_VSYNC_N),
- PINMUX_IPSR_MSEL(IP13_26_24, TS_SPSYNC_C, SEL_TSIF0_2),
- PINMUX_IPSR_MSEL(IP13_26_24, FMIN_E, SEL_DARC_4),
+ PINMUX_IPSR_MSEL(IP13_26_24, TS_SPSYNC_C, SEL_TSIF0_2), /* R8A7794 */
+ PINMUX_IPSR_MSEL(IP13_26_24, FMIN_E, SEL_DARC_4), /* R8A7794 only */
};
static const struct sh_pfc_pin pinmux_pins[] = {
@@ -4931,7 +4978,7 @@ static const struct pinmux_cfg_reg pinmu
0, 0,
/* SEL_CAN [2] */
FN_SEL_CAN_0, FN_SEL_CAN_1, FN_SEL_CAN_2, FN_SEL_CAN_3,
- /* SEL_DARC [3] */
+ /* SEL_DARC [3] (R8A7794 only) */
FN_SEL_DARC_0, FN_SEL_DARC_1, FN_SEL_DARC_2, FN_SEL_DARC_3,
FN_SEL_DARC_4, 0, 0, 0,
/* RESERVED [4] */
@@ -4963,7 +5010,7 @@ static const struct pinmux_cfg_reg pinmu
{ PINMUX_CFG_REG_VAR("MOD_SEL2", 0xE6060094, 32,
2, 2, 1, 1, 1, 1, 1, 1, 2, 2, 1, 1, 2, 2, 1, 1,
2, 2, 2, 1, 1, 2) {
- /* SEL_IEB [2] */
+ /* SEL_IEB [2] (R8A7794 only) */
FN_SEL_IEB_0, FN_SEL_IEB_1, FN_SEL_IEB_2, 0,
/* SEL_IIC0 [2] */
FN_SEL_IIC0_0, FN_SEL_IIC0_1, FN_SEL_IIC0_2, FN_SEL_IIC0_3,
@@ -4975,9 +5022,9 @@ static const struct pinmux_cfg_reg pinmu
FN_SEL_MSI2_0, FN_SEL_MSI2_1,
/* SEL_RAD [1] */
FN_SEL_RAD_0, FN_SEL_RAD_1,
- /* SEL_RCN [1] */
+ /* SEL_RCN [1] (R8A7794 only) */
FN_SEL_RCN_0, FN_SEL_RCN_1,
- /* SEL_RSP [1] */
+ /* SEL_RSP [1] (R8A7794 only) */
FN_SEL_RSP_0, FN_SEL_RSP_1,
/* SEL_SCIFA0 [2] */
FN_SEL_SCIFA0_0, FN_SEL_SCIFA0_1, FN_SEL_SCIFA0_2,
@@ -4998,7 +5045,7 @@ static const struct pinmux_cfg_reg pinmu
0, 0,
/* SEL_TMU [1] */
FN_SEL_TMU_0, FN_SEL_TMU_1,
- /* SEL_TSIF0 [2] */
+ /* SEL_TSIF0 [2] (R8A7794 only) */
FN_SEL_TSIF0_0, FN_SEL_TSIF0_1, FN_SEL_TSIF0_2, FN_SEL_TSIF0_3,
/* SEL_CAN0 [2] */
FN_SEL_CAN0_0, FN_SEL_CAN0_1, FN_SEL_CAN0_2, FN_SEL_CAN0_3,
@@ -5094,6 +5141,28 @@ static const struct sh_pfc_soc_operation
.pin_to_pocctrl = r8a7794_pin_to_pocctrl,
};
+#ifdef CONFIG_PINCTRL_PFC_R8A7745
+const struct sh_pfc_soc_info r8a7745_pinmux_info = {
+ .name = "r8a77450_pfc",
+ .unlock_reg = 0xe6060000, /* PMMR */
+
+ .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+ .pins = pinmux_pins,
+ .nr_pins = ARRAY_SIZE(pinmux_pins),
+ .groups = pinmux_groups,
+ .nr_groups = ARRAY_SIZE(pinmux_groups),
+ .functions = pinmux_functions,
+ .nr_functions = ARRAY_SIZE(pinmux_functions),
+
+ .cfg_regs = pinmux_config_regs,
+
+ .pinmux_data = pinmux_data,
+ .pinmux_data_size = ARRAY_SIZE(pinmux_data),
+};
+#endif
+
+#ifdef CONFIG_PINCTRL_PFC_R8A7794
const struct sh_pfc_soc_info r8a7794_pinmux_info = {
.name = "r8a77940_pfc",
.ops = &r8a7794_pinmux_ops,
@@ -5113,3 +5182,4 @@ const struct sh_pfc_soc_info r8a7794_pin
.pinmux_data = pinmux_data,
.pinmux_data_size = ARRAY_SIZE(pinmux_data),
};
+#endif
Index: linux-pinctrl/drivers/pinctrl/sh-pfc/sh_pfc.h
===================================================================
--- linux-pinctrl.orig/drivers/pinctrl/sh-pfc/sh_pfc.h
+++ linux-pinctrl/drivers/pinctrl/sh-pfc/sh_pfc.h
@@ -260,6 +260,7 @@ extern const struct sh_pfc_soc_info emev
extern const struct sh_pfc_soc_info r8a73a4_pinmux_info;
extern const struct sh_pfc_soc_info r8a7740_pinmux_info;
extern const struct sh_pfc_soc_info r8a7743_pinmux_info;
+extern const struct sh_pfc_soc_info r8a7745_pinmux_info;
extern const struct sh_pfc_soc_info r8a7778_pinmux_info;
extern const struct sh_pfc_soc_info r8a7779_pinmux_info;
extern const struct sh_pfc_soc_info r8a7790_pinmux_info;
^ permalink raw reply
* Re: [PATCH 4/5] arm64: dts: Add ipq8074 SoC and MTP board support
From: Stephen Boyd @ 2017-04-28 18:53 UTC (permalink / raw)
To: Varadarajan Narayanan
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
mturquette-rdvid1DuHRBWk0Htik3J/w,
linus.walleij-QSEj5FYQhm4dnm+yROfE0A,
andy.gross-QSEj5FYQhm4dnm+yROfE0A,
david.brown-QSEj5FYQhm4dnm+yROfE0A, catalin.marinas-5wv7dgnIgG8,
will.deacon-5wv7dgnIgG8, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-soc-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
sricharan-sgV2jX0FEOL9JmXXK+q4OQ, absahu-sgV2jX0FEOL9JmXXK+q4OQ,
sjaganat-sgV2jX0FEOL9JmXXK+q4OQ, Manoharan Vijaya Raghavan
In-Reply-To: <1493373403-23462-5-git-send-email-varada-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
On 04/28, Varadarajan Narayanan wrote:
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> new file mode 100644
> index 0000000..c150bea
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> @@ -0,0 +1,48 @@
> +/dts-v1/;
> +/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#include "ipq8074.dtsi"
> +
> +/ {
> + #address-cells = <0x2>;
> + #size-cells = <0x2>;
> + model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
> + compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
> + interrupt-parent = <&intc>;
> +
> + chosen {
> + bootargs = "console=ttyMSM0,115200,n8 root=/dev/ram0 rw init=/init";
Add an aliases node for serial0 and use a chosen node with stdout-path = "serial0" instead please.
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x0 0x40000000 0x0 0x20000000>;
> + };
> +
> + soc: soc {
Do you need the soc label here? Please remove.
> + pinctrl@1000000 {
> + serial_4_pins: serial4_pinmux {
> + mux {
> + pins = "gpio23", "gpio24";
> + function = "blsp4_uart1";
> + bias-disable;
> + };
> + };
> + };
> +
> + serial@78b3000 {
> + pinctrl-0 = <&serial_4_pins>;
> + pinctrl-names = "default";
> + status = "ok";
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> new file mode 100644
> index 0000000..f910cc0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> @@ -0,0 +1,153 @@
> +/*
> + * Copyright (c) 2017, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,gcc-ipq8074.h>
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. IPQ8074";
> + compatible = "qcom,ipq8074";
> +
> + soc: soc {
> + #address-cells = <0x1>;
> + #size-cells = <0x1>;
> + ranges = <0 0 0 0xffffffff>;
> + compatible = "simple-bus";
> +
> + pinctrl@1000000 {
> + compatible = "qcom,ipq8074-pinctrl";
> + reg = <0x1000000 0x300000>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <0x2>;
> + interrupt-controller;
> + #interrupt-cells = <0x2>;
> + };
> +
> + intc: interrupt-controller@b000000 {
> + compatible = "qcom,msm-qgic2";
> + interrupt-controller;
> + #interrupt-cells = <0x3>;
> + reg = <0xb000000 0x1000>,
> + <0xb002000 0x1000>;
Please align this up with previous reg property.
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + };
Is there an mmio timer as well? We should add it too.
> +
> + gcc: gcc@1800000 {
> + compatible = "qcom,gcc-ipq8074";
> + reg = <0x1800000 0x80000>;
Wow that is a huge area! Is it really that large?
> + #clock-cells = <0x1>;
> + #reset-cells = <0x1>;
> + };
> +
> + serial@78b3000 {
> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> + reg = <0x78b3000 0x200>;
> + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + status = "disabled";
> + };
> + };
> +
> + cpus {
> + #address-cells = <0x1>;
> + #size-cells = <0x0>;
> +
> + cpu-map {
> +
> + cluster0 {
> +
> + core0 {
> + cpu = <&CPU0>;
> + };
> +
> + core1 {
> + cpu = <&CPU1>;
> + };
> +
> + core2 {
> + cpu = <&CPU2>;
> + };
> +
> + core3 {
> + cpu = <&CPU3>;
> + };
> + };
> + };
Is this needed? Looks ok, but just curious if we need to do it
for other arm64 platforms we support.
> +
> + CPU0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0>;
> + next-level-cache = <&L2_0>;
> + enable-method = "psci";
> + };
> +
> + CPU1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x1>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x2>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x3>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + L2_0: l2-cache {
> + compatible = "cache";
> + cache-level = <0x2>;
> + };
This should be inside some CPU? CPU0?
> + };
We should be able to add the performance monitor node too?
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + clocks {
> + sleep_clk: sleep_clk {
> + compatible = "fixed-clock";
> + clock-frequency = <32000>;
Not 32765 or 32768?
> + #clock-cells = <0>;
> + };
> +
> + xo: xo {
> + compatible = "fixed-clock";
> + clock-frequency = <19200000>;
> + #clock-cells = <0>;
> + };
> + };
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH 4/5] arm64: dts: Add ipq8074 SoC and MTP board support
From: Jonathan Neuschäfer @ 2017-04-28 18:58 UTC (permalink / raw)
To: Varadarajan Narayanan
Cc: mark.rutland, devicetree, Manoharan Vijaya Raghavan, linux-gpio,
catalin.marinas, mturquette, sjaganat, sboyd, linux-kernel,
will.deacon, linux-clk, david.brown, absahu, robh+dt,
linux-arm-msm, andy.gross, sricharan, linux-soc, linus.walleij,
linux-arm-kernel
In-Reply-To: <1493373403-23462-5-git-send-email-varada@codeaurora.org>
[-- Attachment #1.1: Type: text/plain, Size: 1451 bytes --]
Hi,
On Fri, Apr 28, 2017 at 03:26:42PM +0530, Varadarajan Narayanan wrote:
> Subject: [PATCH 4/5] arm64: dts: Add ipq8074 SoC and MTP board support
s/MTP/HK01/ ?
> Add initial device tree support for the Qualcomm IPQ8074 SoC and
> HK01 evaluation board.
>
> Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 48 ++++++++++
> arch/arm64/boot/dts/qcom/ipq8074.dtsi | 153 ++++++++++++++++++++++++++++++
> 3 files changed, 202 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> create mode 100644 arch/arm64/boot/dts/qcom/ipq8074.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index cc0f02d..7c6963e 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
Maybe this list should be alphabetically sorted ('i' before 'm').
(I have no strong preference)
Thanks,
Jonathan Neuschäfer
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* [PATCH v2 1/2] dt-bindings: clk: r7s72100: add USB bit definitions
From: Chris Brandt @ 2017-04-28 19:01 UTC (permalink / raw)
To: Simon Horman, Geert Uytterhoeven, Rob Herring, Mark Rutland
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA, Chris Brandt
Add the bit locations that correspond to the USB clocks.
Signed-off-by: Chris Brandt <chris.brandt-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
include/dt-bindings/clock/r7s72100-clock.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/dt-bindings/clock/r7s72100-clock.h b/include/dt-bindings/clock/r7s72100-clock.h
index bc256d31099a..dcd2072151fc 100644
--- a/include/dt-bindings/clock/r7s72100-clock.h
+++ b/include/dt-bindings/clock/r7s72100-clock.h
@@ -34,6 +34,8 @@
/* MSTP7 */
#define R7S72100_CLK_ETHER 4
+#define R7S72100_CLK_USB0 1
+#define R7S72100_CLK_USB1 0
/* MSTP8 */
#define R7S72100_CLK_MMCIF 4
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v2 2/2] ARM: dts: r7s72100: add usb clocks to device tree
From: Chris Brandt @ 2017-04-28 19:01 UTC (permalink / raw)
To: Simon Horman, Geert Uytterhoeven, Rob Herring, Mark Rutland
Cc: devicetree, linux-renesas-soc, Chris Brandt
In-Reply-To: <20170428190134.63895-1-chris.brandt@renesas.com>
This adds the USB0 and USB1 clocks to the device tree.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
* moved bit defines to a separate patch
* added Reviewed-by
---
arch/arm/boot/dts/r7s72100.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index fb54cb5d3fad..4ed12a4d9d51 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -144,9 +144,9 @@
#clock-cells = <1>;
compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0xfcfe0430 4>;
- clocks = <&b_clk>;
- clock-indices = <R7S72100_CLK_ETHER>;
- clock-output-names = "ether";
+ clocks = <&b_clk>, <&p1_clk>, <&p1_clk>;
+ clock-indices = <R7S72100_CLK_ETHER R7S72100_CLK_USB0 R7S72100_CLK_USB1>;
+ clock-output-names = "ether", "usb0", "usb1";
};
mstp8_clks: mstp8_clks@fcfe0434 {
--
2.11.0
^ permalink raw reply related
* Re: [PATCH 1/2] Add DT bindings documentation for the max7360 mfd driver
From: Rob Herring @ 2017-04-28 19:23 UTC (permalink / raw)
To: Valentin Sitdikov
Cc: lee.jones-QSEj5FYQhm4dnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Andrei Dranitca
In-Reply-To: <20170425081557.13941-2-valentin_sitdikov-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
On Tue, Apr 25, 2017 at 11:15:56AM +0300, Valentin Sitdikov wrote:
dt-bindings: mfd: ... for subject.
And you need a commit msg.
> Signed-off-by: Valentin Sitdikov <valentin_sitdikov-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
> Signed-off-by: Andrei Dranitca <Andrei_Dranitca-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
> ---
> Documentation/devicetree/bindings/mfd/max7360.txt | 72 +++++++++++++++++++++++
> 1 file changed, 72 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/max7360.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/max7360.txt b/Documentation/devicetree/bindings/mfd/max7360.txt
> new file mode 100644
> index 0000000..359073a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/max7360.txt
> @@ -0,0 +1,72 @@
> +* Maxim MAX7360 multi-function device
> +
> +The Maxim MAX7360 is a multifunction device which includes
> +64 key switches, eight LED drivers/GPIOs, PWM intensity control,
> +and rotary switch control.
> +
> +Required properties:
> +- compatible: Should be the following: "maxim,max7360"
> +- reg: Specifies the i2c slave address of the max7360 block. It can be 0x38, 0x3a, 0x3c or 0x3e IIUC.
> +
> +Optional properties:
> +- interrupt-parent: Specifies the phandle of the interrupt controller to which
> + the interrupts from MAX7360 are routed to.
> +- interrupt-names: might be "int-shared" or list of "inti" and "intk"
I don't see anything in the datasheet about shared irq. If you connect
both lines together on a board, just repeat the same connection.
> +- interrupt-controller: Identifies the device as an interrupt controller.
> +- #interrupt-cells : Number of cells to encode an interrupt source, shall be 1.
> +
> +Examples:
> +
> +Without subnodes:
> + max7360@38 {
> + compatible = "maxim,max7360";
> + reg = <0x38>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "int-shared";
> + interrupt-controller;
> + #interrupt-cells = <0x1>;
> +
> + };
> +
> +With subnodes:
> + max7360@38 {
> + compatible = "maxim,max7360";
> + reg = <0x38>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "int-shared";
> + interrupt-controller;
> + #interrupt-cells = <0x1>;
> +
> + max7360_gpio: max7360_gpio@0 {
Use generic names and no unit address when no reg prop:
gpio {
> + compatible = "maxim,max7360-gpio";
> + gpio-controller;
> + #gpio-cells = <0x2>;
> + interrupt-controller;
> + #interrupt-cells = <0x2>;
> + interrupts = <0>;
> + };
> +
> + max7360_keypad {
keypad {
> + compatible = "maxim,max7360-keypad";
> + maxim,debounce_reg = /bits/ 8 <0xef>;
> + maxim,ports_reg = /bits/ 8 <0xae>;
> + linux,keymap = < MATRIX_KEY(0, 0, KEY_F5)
> + MATRIX_KEY(1, 0, KEY_F4) >;
> + keypad,num-rows = <2>;
> + keypad,num-columns = <1>;
> + interrupts = <1>;
> + };
> +
> + max7360_pwm: max7360_pwm {
pwm {
> + compatible = "maxim,max7360-pwm";
> + #pwm-cells = <0x2>;
> + };
> +
> + max7360_rotary_encoder {
rotary-encoder {
> + compatible = "maxim,max7360-rotary";
> + interrupts = <2>;
> + };
> +
> + };
> --
> 2.9.3
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v4 1/5] dt-bindings: gpu: add bindings for the ARM Mali Midgard GPU
From: Rob Herring @ 2017-04-28 19:27 UTC (permalink / raw)
To: Guillaume Tucker
Cc: Mark Rutland, Heiko Stübner, Neil Armstrong, Sjoerd Simons,
Enric Balletbo i Serra, John Reitan, Wookey,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <9349c8ae9091fbd93e9410f4cfae770ac850bf6b.1493125299.git.guillaume.tucker-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
On Tue, Apr 25, 2017 at 02:16:16PM +0100, Guillaume Tucker wrote:
> The ARM Mali Midgard GPU family is present in a number of SoCs
> from many different vendors such as Samsung Exynos and Rockchip.
>
> Import the device tree bindings documentation from the r16p0
> release of the Mali Midgard GPU kernel driver:
>
> https://developer.arm.com/-/media/Files/downloads/mali-drivers/kernel/mali-midgard-gpu/TX011-SW-99002-r16p0-00rel0.tgz
>
> Remove the copyright and GPL licence header as deemed not necessary.
>
> Redesign the "compatible" property strings to list all the Mali
> Midgard GPU types and include optional vendor ones.
>
> Drop the "clock-names" property as only one clock is used by the Mali
> Midgard driver (which now needs to call clk_get with NULL).
>
> Convert the "interrupt-names" property values to lower-case: "job",
> "mmu" and "gpu".
>
> Replace the deprecated "operating-points" optional property with
> "operating-points-v2".
>
> Omit the following optional properties in this initial version as they
> are only used in very specific cases:
>
> * snoop_enable_smc
> * snoop_disable_smc
> * jm_config
> * power_model
> * system-coherency
> * ipa-model
>
> Update the example accordingly to reflect all these changes.
>
> CC: John Reitan <john.reitan-5wv7dgnIgG8@public.gmane.org>
> Tested-by: Enric Balletbo i Serra <enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
> Signed-off-by: Guillaume Tucker <guillaume.tucker-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
> ---
> .../devicetree/bindings/gpu/arm,mali-midgard.txt | 82 ++++++++++++++++++++++
> 1 file changed, 82 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
>
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
> new file mode 100644
> index 000000000000..547ddeceb498
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
> @@ -0,0 +1,82 @@
> +ARM Mali Midgard GPU
> +====================
> +
> +Required properties:
> +
> +- compatible :
> + * Must be one of the following:
> + + "arm,mali-t60x"
> + + "arm,mali-t62x"
Don't use wildcards.
> + + "arm,mali-t720"
> + + "arm,mali-t760"
> + + "arm,mali-t820"
> + + "arm,mali-t830"
> + + "arm,mali-t860"
> + + "arm,mali-t880"
> + * And, optionally, one of the vendor specific compatible:
IMO, these should not be optional.
> + + "amlogic,meson-gxm-mali"
> + + "rockchip,rk3288-mali"
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v7 5/9][resend] ASoC: soc-core: enable "dai-format" on snd_soc_of_parse_daifmt()
From: Rob Herring @ 2017-04-28 19:27 UTC (permalink / raw)
To: Kuninori Morimoto; +Cc: Mark Brown, Linux-ALSA, Simon, Linux-DT
In-Reply-To: <87r30er4qt.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
On Wed, Apr 26, 2017 at 9:02 PM, Kuninori Morimoto
<kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org> wrote:
> From: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
>
> Current snd_soc_of_parse_daifmt() detects [prefix]format, but
> "format" was unclear in some case. This patch checks "dai-format"
> first, and try to check "[prefix]format" if "dai-format" was not
> exist.
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> ---
> v6 -> v7
>
> - no change
>
> sound/soc/soc-core.c | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
Reviewed-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v7 6/9][resend] ASoC: simple-card-utils: enable "label" on asoc_simple_card_parse_card_name
From: Rob Herring @ 2017-04-28 19:29 UTC (permalink / raw)
To: Kuninori Morimoto; +Cc: Mark Brown, Linux-ALSA, Simon, Linux-DT
In-Reply-To: <87pofyr4qc.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
On Wed, Apr 26, 2017 at 9:02 PM, Kuninori Morimoto
<kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org> wrote:
> From: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
>
> Current asoc_simple_card_parse_card_name() detects [prefix]name,
> but in generally, we uses "label" for user visible names.
> This patch enables it.
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> ---
> v6 -> v7
>
> - don't allow "[prefix]label"
>
> sound/soc/generic/simple-card-utils.c | 16 +++++++++++-----
> 1 file changed, 11 insertions(+), 5 deletions(-)
Reviewed-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v7 2/9] of_graph: add of_graph_get_remote_endpoint()
From: Rob Herring @ 2017-04-28 19:33 UTC (permalink / raw)
To: Kuninori Morimoto; +Cc: Mark Brown, Linux-ALSA, Simon, Linux-DT
In-Reply-To: <87d1c7ool6.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
On Wed, Apr 19, 2017 at 8:31 PM, Kuninori Morimoto
<kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org> wrote:
>
> From: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
>
> It should use same method to get same result.
> To getting remote-endpoint node,
> let's use of_graph_get_remote_endpoint()
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> ---
> v6 -> v7
>
> - no change
>
> drivers/of/base.c | 18 ++++++++++++++++--
> include/linux/of_graph.h | 8 ++++++++
> 2 files changed, 24 insertions(+), 2 deletions(-)
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v7 3/9] of_graph: add of_graph_get_port_parent()
From: Rob Herring @ 2017-04-28 19:34 UTC (permalink / raw)
To: Kuninori Morimoto; +Cc: Mark Brown, Linux-ALSA, Simon, Linux-DT
In-Reply-To: <87bmrrooka.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
On Wed, Apr 19, 2017 at 8:32 PM, Kuninori Morimoto
<kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org> wrote:
>
> From: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
>
> Linux kernel already has of_graph_get_remote_port_parent(),
> but, sometimes we want to get own port parent.
> This patch adds of_graph_get_port_parent()
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> ---
> v6 -> v7
>
> - no change
>
> drivers/of/base.c | 30 ++++++++++++++++++++++--------
> include/linux/of_graph.h | 7 +++++++
> 2 files changed, 29 insertions(+), 8 deletions(-)
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v7 5/9] ASoC: soc-core: enable "dai-format" on snd_soc_of_parse_daifmt()
From: Rob Herring @ 2017-04-28 19:34 UTC (permalink / raw)
To: Kuninori Morimoto; +Cc: Mark Brown, Linux-ALSA, Simon, Linux-DT
In-Reply-To: <878tmvooif.wl%kuninori.morimoto.gx@renesas.com>
On Wed, Apr 19, 2017 at 8:33 PM, Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> wrote:
> From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>
> Current snd_soc_of_parse_daifmt() detects [prefix]format, but
> "format" was unclear in some case. This patch checks "dai-format"
> first, and try to check "[prefix]format" if "dai-format" was not
> exist.
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> v6 -> v7
>
> - no change
>
> sound/soc/soc-core.c | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
> index 8be2ce1..e84a820 100644
> --- a/sound/soc/soc-core.c
> +++ b/sound/soc/soc-core.c
> @@ -3955,11 +3955,15 @@ unsigned int snd_soc_of_parse_daifmt(struct device_node *np,
> prefix = "";
>
> /*
> - * check "[prefix]format = xxx"
> + * check "dai-format = xxx"
> + * or "[prefix]format = xxx"
> * SND_SOC_DAIFMT_FORMAT_MASK area
> */
> - snprintf(prop, sizeof(prop), "%sformat", prefix);
> - ret = of_property_read_string(np, prop, &str);
> + ret = of_property_read_string(np, "dai-format", &str);
> + if (ret < 0) {
> + snprintf(prop, sizeof(prop), "%sformat", prefix);
> + ret = of_property_read_string(np, prop, &str);
> + }
> if (ret == 0) {
> for (i = 0; i < ARRAY_SIZE(of_fmt_table); i++) {
> if (strcmp(str, of_fmt_table[i].name) == 0) {
> --
> 1.9.1
>
^ permalink raw reply
* Re: [PATCH v7 4/9] of_graph: add of_graph_get_endpoint_count()
From: Rob Herring @ 2017-04-28 19:35 UTC (permalink / raw)
To: Kuninori Morimoto; +Cc: Mark Brown, Linux-ALSA, Simon, Linux-DT
In-Reply-To: <87a87boojg.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
On Wed, Apr 19, 2017 at 8:32 PM, Kuninori Morimoto
<kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org> wrote:
>
> From: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
>
> OF graph want to count its endpoint number, same as
> of_get_child_count(). This patch adds of_graph_get_endpoint_count()
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> ---
> v6 -> v7
>
> - no change
>
> drivers/of/base.c | 12 ++++++++++++
> include/linux/of_graph.h | 6 ++++++
> 2 files changed, 18 insertions(+)
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH 01/10] clk: renesas: cpg-mssr: Document R-Car Gen2 support
From: Rob Herring @ 2017-04-28 19:42 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Michael Turquette, Stephen Boyd, linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA, Mark Rutland,
devicetree-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <1493139200-27396-2-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
On Tue, Apr 25, 2017 at 06:53:11PM +0200, Geert Uytterhoeven wrote:
> Document use of the Renesas Clock Pulse Generator / Module Standby and
> Software Reset DT Bindings for various member of the R-Car Gen2 family
> (H2, M2-W, V2H, M2-N, and E2).
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> ---
> Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt | 10 ++++++++--
> 1 file changed, 8 insertions(+), 2 deletions(-)
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [RESEND][PATCH V2 1/4] mfd: Add ROHM BD9571MWV-M PMIC DT bindings
From: Rob Herring @ 2017-04-28 19:43 UTC (permalink / raw)
To: Marek Vasut
Cc: linux-renesas-soc, lee.jones, Marek Vasut, devicetree,
Geert Uytterhoeven
In-Reply-To: <20170425183210.30594-1-marek.vasut+renesas@gmail.com>
On Tue, Apr 25, 2017 at 08:32:07PM +0200, Marek Vasut wrote:
> Add DT bindings for the ROHM BD9571MWV-M PMIC. This PMIC has
> the following features:
> - multiple voltage monitors for 1V8, 2V5, 3V3 voltage rail
> - one voltage regulator for DVFS
> - two GPIOs
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> Cc: devicetree@vger.kernel.org
> Cc: Rob Herring <robh@kernel.org>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: linux-renesas-soc@vger.kernel.org
> ---
> V2: - Drop the compatible = "regulator-fixed" from the binding example,
> it should not be there.
> - List the VD09 regulator
> ---
> .../devicetree/bindings/mfd/bd9571mwv.txt | 49 ++++++++++++++++++++++
> 1 file changed, 49 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/bd9571mwv.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
> new file mode 100644
> index 000000000000..ce24231edd7d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
> @@ -0,0 +1,49 @@
> +* ROHM BD9571MWV Power Management Integrated Circuit (PMIC) bindings
> +
> +Required properties:
> + - compatible : Should be "rohm,bd9571mwv".
> + - reg : I2C slave address.
> + - interrupt-parent : Phandle to the parent interrupt controller.
> + - interrupts : The interrupt line the device is connected to.
> + - interrupt-controller : Marks the device node as an interrupt controller.
> + - #interrupt-cells : The number of cells to describe an IRQ, should be 2.
> + The first cell is the IRQ number.
> + The second cell is the flags, encoded as trigger
> + masks from ../interrupt-controller/interrupts.txt.
> + - gpio-controller : Marks the device node as a GPIO Controller.
> + - #gpio-cells : Should be two. The first cell is the pin number and
> + the second cell is used to specify flags.
> + See ../gpio/gpio.txt for more information.
> + - regulators: : List of child nodes that specify the regulator
> + initialization data. Child nodes must be named
> + after their hardware counterparts:
> + - vd09
> + - vd18
> + - vd25
> + - vd33
> + - dvfs
> + Each child node is defined using the standard
> + binding for regulators.
> +
> +Example:
> +
> + pmic: bd9571mwv@30 {
pmic@30 ...
Otherwise,
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply
* [PATCH v4 00/14] Ingenic JZ4740 / JZ4780 pinctrl driver
From: Paul Cercueil @ 2017-04-28 20:08 UTC (permalink / raw)
To: Linus Walleij, Alexandre Courbot, Rob Herring, Mark Rutland,
Ralf Baechle
Cc: Boris Brezillon, Thierry Reding, Bartlomiej Zolnierkiewicz,
Maarten ter Huurne, Lars-Peter Clausen, Paul Burton, james.hogan,
linux-gpio, devicetree, linux-kernel, linux-mips, linux-mmc,
linux-mtd, linux-pwm, linux-fbdev
In-Reply-To: <20170402204244.14216-2-paul@crapouillou.net>
Hi,
This is the v5 of my Ingenic pinctrl / GPIO patch set.
The pinctrl driver now probes its children devices without using the MFD
subsystem; the GPIO driver now uses the 'reg' property to know the bank
number.
Best regards,
- Paul
^ permalink raw reply
* [PATCH v5 01/14] dt/bindings: Document pinctrl-ingenic
From: Paul Cercueil @ 2017-04-28 20:08 UTC (permalink / raw)
To: Linus Walleij, Alexandre Courbot, Rob Herring, Mark Rutland,
Ralf Baechle
Cc: Boris Brezillon, Thierry Reding, Bartlomiej Zolnierkiewicz,
Maarten ter Huurne, Lars-Peter Clausen, Paul Burton,
james.hogan-1AXoQHu6uovQT0dZR+AlfA,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-mips-6z/3iImG2C8G8FEW9MqTrA,
linux-mmc-u79uwXL29TY76Z2rM5mHXA,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-pwm-u79uwXL29TY76Z2rM5mHXA,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA, Paul Cercueil
In-Reply-To: <20170428200824.10906-1-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
This commit adds documentation for the devicetree bindings of the
pinctrl-ingenic driver, which handles pin configuration and pin
muxing of the Ingenic SoCs currently supported by the Linux kernel.
Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
.../bindings/pinctrl/ingenic,pinctrl.txt | 41 ++++++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
v2: Rewrote the documentation for the new pinctrl-ingenic driver
v3: No changes
v4: Update for the v4 version of the pinctrl-ingenic driver
v5: Rename 'ingenic-pinctrl@...' to 'pin-controller@...' in example
diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
new file mode 100644
index 000000000000..ca313a7aeaff
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
@@ -0,0 +1,41 @@
+Ingenic jz47xx pin controller
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+For the jz47xx SoCs, pin control is tightly bound with GPIO ports. All pins may
+be used as GPIOs, multiplexed device functions are configured within the
+GPIO port configuration registers and it is typical to refer to pins using the
+naming scheme "PxN" where x is a character identifying the GPIO port with
+which the pin is associated and N is an integer from 0 to 31 identifying the
+pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and
+PB31 is the last pin in GPIO port B. The jz4740 contains 4 GPIO ports, PA to
+PD, for a total of 128 pins. The jz4780 contains 6 GPIO ports, PA to PF, for a
+total of 192 pins.
+
+
+Required properties:
+--------------------
+
+ - compatible: One of:
+ - "ingenic,jz4740-pinctrl"
+ - "ingenic,jz4770-pinctrl"
+ - "ingenic,jz4780-pinctrl"
+ - reg: Address range of the pinctrl registers.
+
+
+GPIO sub-nodes
+--------------
+
+The pinctrl node can have optional sub-nodes for the Ingenic GPIO driver;
+please refer to ../gpio/ingenic,gpio.txt.
+
+
+Example:
+--------
+
+pinctrl: pin-controller@10010000 {
+ compatible = "ingenic,jz4740-pinctrl";
+ reg = <0x10010000 0x400>;
+};
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v5 02/14] dt/bindings: Document gpio-ingenic
From: Paul Cercueil @ 2017-04-28 20:08 UTC (permalink / raw)
To: Linus Walleij, Alexandre Courbot, Rob Herring, Mark Rutland,
Ralf Baechle
Cc: Boris Brezillon, Thierry Reding, Bartlomiej Zolnierkiewicz,
Maarten ter Huurne, Lars-Peter Clausen, Paul Burton, james.hogan,
linux-gpio, devicetree, linux-kernel, linux-mips, linux-mmc,
linux-mtd, linux-pwm, linux-fbdev, Paul Cercueil
In-Reply-To: <20170428200824.10906-1-paul@crapouillou.net>
This commit adds documentation for the devicetree bindings of the
gpio-ingenic driver, which handles GPIOs of the Ingenic SoCs
currently supported by the Linux kernel.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
.../devicetree/bindings/gpio/ingenic,gpio.txt | 46 ++++++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
v2: New patch
v3: No changes
v4: Update for the v4 version of the gpio-ingenic driver
v5: Remove gpio-bank-... compatible strings, and add 'reg' property
diff --git a/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt b/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
new file mode 100644
index 000000000000..7988aeb725f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
@@ -0,0 +1,46 @@
+Ingenic jz47xx GPIO controller
+
+That the Ingenic GPIO driver node must be a sub-node of the Ingenic pinctrl
+driver node.
+
+Required properties:
+--------------------
+
+ - compatible: Must contain one of:
+ - "ingenic,jz4740-gpio"
+ - "ingenic,jz4770-gpio"
+ - "ingenic,jz4780-gpio"
+ - reg: The GPIO bank number.
+ - interrupt-controller: Marks the device node as an interrupt controller.
+ - interrupts: Interrupt specifier for the controllers interrupt.
+ - #interrupt-cells: Should be 2. Refer to
+ ../interrupt-controller/interrupts.txt for more details.
+ - gpio-controller: Marks the device node as a GPIO controller.
+ - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
+ cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
+ GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
+ - gpio-ranges: Range of pins managed by the GPIO controller. Refer to
+ 'gpio.txt' in this directory for more details.
+
+Example:
+--------
+
+&pinctrl {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,jz4740-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <28>;
+ };
+};
--
2.11.0
^ permalink raw reply related
* [PATCH v5 03/14] pinctrl: add a pinctrl driver for the Ingenic jz47xx SoCs
From: Paul Cercueil @ 2017-04-28 20:08 UTC (permalink / raw)
To: Linus Walleij, Alexandre Courbot, Rob Herring, Mark Rutland,
Ralf Baechle
Cc: Boris Brezillon, Thierry Reding, Bartlomiej Zolnierkiewicz,
Maarten ter Huurne, Lars-Peter Clausen, Paul Burton,
james.hogan-1AXoQHu6uovQT0dZR+AlfA,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-mips-6z/3iImG2C8G8FEW9MqTrA,
linux-mmc-u79uwXL29TY76Z2rM5mHXA,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-pwm-u79uwXL29TY76Z2rM5mHXA,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA, Paul Cercueil
In-Reply-To: <20170428200824.10906-1-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
This driver handles pin configuration and pin muxing for the
JZ4740 and JZ4780 SoCs from Ingenic.
Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
---
drivers/pinctrl/Kconfig | 10 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-ingenic.c | 852 ++++++++++++++++++++++++++++++++++++++
3 files changed, 863 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl-ingenic.c
v2: Consider it's a new patch. Completely rewritten from v1.
v3: 'unsigned' -> 'unsigned int'
v4: Completely rewritten from v3.
v5: Probe child devices directly instead of using MFD framework
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 8f8c2af45781..82ce72fcb8e0 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -285,6 +285,16 @@ config PINCTRL_ZYNQ
help
This selects the pinctrl driver for Xilinx Zynq.
+config PINCTRL_INGENIC
+ bool "Pinctrl driver for the Ingenic JZ47xx SoCs"
+ default y
+ depends on MACH_INGENIC || COMPILE_TEST
+ select GENERIC_PINCONF
+ select GENERIC_PINCTRL_GROUPS
+ select GENERIC_PINMUX_FUNCTIONS
+ select REGMAP_MMIO
+ select MFD_CORE
+
source "drivers/pinctrl/aspeed/Kconfig"
source "drivers/pinctrl/bcm/Kconfig"
source "drivers/pinctrl/berlin/Kconfig"
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index a251f439626f..80f327239d4b 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_PINCTRL_LPC18XX) += pinctrl-lpc18xx.o
obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o
obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o
obj-$(CONFIG_PINCTRL_ZYNQ) += pinctrl-zynq.o
+obj-$(CONFIG_PINCTRL_INGENIC) += pinctrl-ingenic.o
obj-$(CONFIG_ARCH_ASPEED) += aspeed/
obj-y += bcm/
diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
new file mode 100644
index 000000000000..d8473d929cb1
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -0,0 +1,852 @@
+/*
+ * Ingenic SoCs pinctrl driver
+ *
+ * Copyright (c) 2017 Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/compiler.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "core.h"
+#include "pinconf.h"
+#include "pinmux.h"
+
+#define JZ4740_GPIO_DATA 0x10
+#define JZ4740_GPIO_PULL_DIS 0x30
+#define JZ4740_GPIO_FUNC 0x40
+#define JZ4740_GPIO_SELECT 0x50
+#define JZ4740_GPIO_DIR 0x60
+#define JZ4740_GPIO_TRIG 0x70
+#define JZ4740_GPIO_FLAG 0x80
+
+#define JZ4770_GPIO_INT 0x10
+#define JZ4770_GPIO_MSK 0x20
+#define JZ4770_GPIO_PAT1 0x30
+#define JZ4770_GPIO_PAT0 0x40
+#define JZ4770_GPIO_FLAG 0x50
+#define JZ4770_GPIO_PEN 0x70
+
+#define REG_SET(x) ((x) + 0x4)
+#define REG_CLEAR(x) ((x) + 0x8)
+
+#define PINS_PER_GPIO_CHIP 32
+
+enum jz_version {
+ ID_JZ4740,
+ ID_JZ4770,
+ ID_JZ4780,
+};
+
+struct ingenic_chip_info {
+ unsigned int num_chips;
+
+ const struct group_desc *groups;
+ unsigned int num_groups;
+
+ const struct function_desc *functions;
+ unsigned int num_functions;
+
+ const u32 *pull_ups, *pull_downs;
+};
+
+struct ingenic_pinctrl {
+ struct device *dev;
+ struct regmap *map;
+ struct pinctrl_dev *pctl;
+ struct pinctrl_pin_desc *pdesc;
+ enum jz_version version;
+
+ const struct ingenic_chip_info *info;
+};
+
+static const u32 jz4740_pull_ups[4] = {
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+};
+
+static const u32 jz4740_pull_downs[4] = {
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+};
+
+static int jz4740_mmc_1bit_pins[] = { 0x69, 0x68, 0x6a, };
+static int jz4740_mmc_4bit_pins[] = { 0x6b, 0x6c, 0x6d, };
+static int jz4740_uart0_data_pins[] = { 0x7a, 0x79, };
+static int jz4740_uart0_hwflow_pins[] = { 0x7e, 0x7f, };
+static int jz4740_uart1_data_pins[] = { 0x7e, 0x7f, };
+static int jz4740_lcd_8bit_pins[] = {
+ 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x52, 0x53, 0x54,
+};
+static int jz4740_lcd_16bit_pins[] = {
+ 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, 0x55,
+};
+static int jz4740_lcd_18bit_pins[] = { 0x50, 0x51, };
+static int jz4740_lcd_18bit_tft_pins[] = { 0x56, 0x57, 0x31, 0x32, };
+static int jz4740_nand_cs1_pins[] = { 0x39, };
+static int jz4740_nand_cs2_pins[] = { 0x3a, };
+static int jz4740_nand_cs3_pins[] = { 0x3b, };
+static int jz4740_nand_cs4_pins[] = { 0x3c, };
+static int jz4740_pwm_pwm0_pins[] = { 0x77, };
+static int jz4740_pwm_pwm1_pins[] = { 0x78, };
+static int jz4740_pwm_pwm2_pins[] = { 0x79, };
+static int jz4740_pwm_pwm3_pins[] = { 0x7a, };
+static int jz4740_pwm_pwm4_pins[] = { 0x7b, };
+static int jz4740_pwm_pwm5_pins[] = { 0x7c, };
+static int jz4740_pwm_pwm6_pins[] = { 0x7e, };
+static int jz4740_pwm_pwm7_pins[] = { 0x7f, };
+
+static int jz4740_mmc_1bit_funcs[] = { 0, 0, 0, };
+static int jz4740_mmc_4bit_funcs[] = { 0, 0, 0, };
+static int jz4740_uart0_data_funcs[] = { 1, 1, };
+static int jz4740_uart0_hwflow_funcs[] = { 1, 1, };
+static int jz4740_uart1_data_funcs[] = { 2, 2, };
+static int jz4740_lcd_8bit_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, };
+static int jz4740_lcd_16bit_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, };
+static int jz4740_lcd_18bit_funcs[] = { 0, 0, };
+static int jz4740_lcd_18bit_tft_funcs[] = { 0, 0, 0, 0, };
+static int jz4740_nand_cs1_funcs[] = { 0, };
+static int jz4740_nand_cs2_funcs[] = { 0, };
+static int jz4740_nand_cs3_funcs[] = { 0, };
+static int jz4740_nand_cs4_funcs[] = { 0, };
+static int jz4740_pwm_pwm0_funcs[] = { 0, };
+static int jz4740_pwm_pwm1_funcs[] = { 0, };
+static int jz4740_pwm_pwm2_funcs[] = { 0, };
+static int jz4740_pwm_pwm3_funcs[] = { 0, };
+static int jz4740_pwm_pwm4_funcs[] = { 0, };
+static int jz4740_pwm_pwm5_funcs[] = { 0, };
+static int jz4740_pwm_pwm6_funcs[] = { 0, };
+static int jz4740_pwm_pwm7_funcs[] = { 0, };
+
+#define INGENIC_PIN_GROUP(name, id) \
+ { \
+ name, \
+ id##_pins, \
+ ARRAY_SIZE(id##_pins), \
+ id##_funcs, \
+ }
+
+static const struct group_desc jz4740_groups[] = {
+ INGENIC_PIN_GROUP("mmc-1bit", jz4740_mmc_1bit),
+ INGENIC_PIN_GROUP("mmc-4bit", jz4740_mmc_4bit),
+ INGENIC_PIN_GROUP("uart0-data", jz4740_uart0_data),
+ INGENIC_PIN_GROUP("uart0-hwflow", jz4740_uart0_hwflow),
+ INGENIC_PIN_GROUP("uart1-data", jz4740_uart1_data),
+ INGENIC_PIN_GROUP("lcd-8bit", jz4740_lcd_8bit),
+ INGENIC_PIN_GROUP("lcd-16bit", jz4740_lcd_16bit),
+ INGENIC_PIN_GROUP("lcd-18bit", jz4740_lcd_18bit),
+ INGENIC_PIN_GROUP("lcd-18bit-tft", jz4740_lcd_18bit_tft),
+ { "lcd-no-pins", },
+ INGENIC_PIN_GROUP("nand-cs1", jz4740_nand_cs1),
+ INGENIC_PIN_GROUP("nand-cs2", jz4740_nand_cs2),
+ INGENIC_PIN_GROUP("nand-cs3", jz4740_nand_cs3),
+ INGENIC_PIN_GROUP("nand-cs4", jz4740_nand_cs4),
+ INGENIC_PIN_GROUP("pwm0", jz4740_pwm_pwm0),
+ INGENIC_PIN_GROUP("pwm1", jz4740_pwm_pwm1),
+ INGENIC_PIN_GROUP("pwm2", jz4740_pwm_pwm2),
+ INGENIC_PIN_GROUP("pwm3", jz4740_pwm_pwm3),
+ INGENIC_PIN_GROUP("pwm4", jz4740_pwm_pwm4),
+ INGENIC_PIN_GROUP("pwm5", jz4740_pwm_pwm5),
+ INGENIC_PIN_GROUP("pwm6", jz4740_pwm_pwm6),
+ INGENIC_PIN_GROUP("pwm7", jz4740_pwm_pwm7),
+};
+
+static const char *jz4740_mmc_groups[] = { "mmc-1bit", "mmc-4bit", };
+static const char *jz4740_uart0_groups[] = { "uart0-data", "uart0-hwflow", };
+static const char *jz4740_uart1_groups[] = { "uart1-data", };
+static const char *jz4740_lcd_groups[] = {
+ "lcd-8bit", "lcd-16bit", "lcd-18bit", "lcd-18bit-tft", "lcd-no-pins",
+};
+static const char *jz4740_nand_groups[] = {
+ "nand-cs1", "nand-cs2", "nand-cs3", "nand-cs4",
+};
+static const char *jz4740_pwm0_groups[] = { "pwm0", };
+static const char *jz4740_pwm1_groups[] = { "pwm1", };
+static const char *jz4740_pwm2_groups[] = { "pwm2", };
+static const char *jz4740_pwm3_groups[] = { "pwm3", };
+static const char *jz4740_pwm4_groups[] = { "pwm4", };
+static const char *jz4740_pwm5_groups[] = { "pwm5", };
+static const char *jz4740_pwm6_groups[] = { "pwm6", };
+static const char *jz4740_pwm7_groups[] = { "pwm7", };
+
+static const struct function_desc jz4740_functions[] = {
+ { "mmc", jz4740_mmc_groups, ARRAY_SIZE(jz4740_mmc_groups), },
+ { "uart0", jz4740_uart0_groups, ARRAY_SIZE(jz4740_uart0_groups), },
+ { "uart1", jz4740_uart1_groups, ARRAY_SIZE(jz4740_uart1_groups), },
+ { "lcd", jz4740_lcd_groups, ARRAY_SIZE(jz4740_lcd_groups), },
+ { "nand", jz4740_nand_groups, ARRAY_SIZE(jz4740_nand_groups), },
+ { "pwm0", jz4740_pwm0_groups, ARRAY_SIZE(jz4740_pwm0_groups), },
+ { "pwm1", jz4740_pwm1_groups, ARRAY_SIZE(jz4740_pwm1_groups), },
+ { "pwm2", jz4740_pwm2_groups, ARRAY_SIZE(jz4740_pwm2_groups), },
+ { "pwm3", jz4740_pwm3_groups, ARRAY_SIZE(jz4740_pwm3_groups), },
+ { "pwm4", jz4740_pwm4_groups, ARRAY_SIZE(jz4740_pwm4_groups), },
+ { "pwm5", jz4740_pwm5_groups, ARRAY_SIZE(jz4740_pwm5_groups), },
+ { "pwm6", jz4740_pwm6_groups, ARRAY_SIZE(jz4740_pwm6_groups), },
+ { "pwm7", jz4740_pwm7_groups, ARRAY_SIZE(jz4740_pwm7_groups), },
+};
+
+static const struct ingenic_chip_info jz4740_chip_info = {
+ .num_chips = 4,
+ .groups = jz4740_groups,
+ .num_groups = ARRAY_SIZE(jz4740_groups),
+ .functions = jz4740_functions,
+ .num_functions = ARRAY_SIZE(jz4740_functions),
+ .pull_ups = jz4740_pull_ups,
+ .pull_downs = jz4740_pull_downs,
+};
+
+static const u32 jz4770_pull_ups[6] = {
+ 0x3fffffff, 0xfff0030c, 0xffffffff, 0xffff4fff, 0xfffffb7c, 0xffa7f00f,
+};
+
+static const u32 jz4770_pull_downs[6] = {
+ 0x00000000, 0x000f0c03, 0x00000000, 0x0000b000, 0x00000483, 0x00580ff0,
+};
+
+static int jz4770_uart0_data_pins[] = { 0xa0, 0xa3, };
+static int jz4770_uart0_hwflow_pins[] = { 0xa1, 0xa2, };
+static int jz4770_uart1_data_pins[] = { 0x7a, 0x7c, };
+static int jz4770_uart1_hwflow_pins[] = { 0x7b, 0x7d, };
+static int jz4770_uart2_data_pins[] = { 0x66, 0x67, };
+static int jz4770_uart2_hwflow_pins[] = { 0x65, 0x64, };
+static int jz4770_uart3_data_pins[] = { 0x6c, 0x85, };
+static int jz4770_uart3_hwflow_pins[] = { 0x88, 0x89, };
+static int jz4770_uart4_data_pins[] = { 0x54, 0x4a, };
+static int jz4770_mmc0_8bit_a_pins[] = { 0x04, 0x05, 0x06, 0x07, 0x18, };
+static int jz4770_mmc0_4bit_a_pins[] = { 0x15, 0x16, 0x17, };
+static int jz4770_mmc0_1bit_a_pins[] = { 0x12, 0x13, 0x14, };
+static int jz4770_mmc0_4bit_e_pins[] = { 0x95, 0x96, 0x97, };
+static int jz4770_mmc0_1bit_e_pins[] = { 0x9c, 0x9d, 0x94, };
+static int jz4770_mmc1_4bit_d_pins[] = { 0x75, 0x76, 0x77, };
+static int jz4770_mmc1_1bit_d_pins[] = { 0x78, 0x79, 0x74, };
+static int jz4770_mmc1_4bit_e_pins[] = { 0x95, 0x96, 0x97, };
+static int jz4770_mmc1_1bit_e_pins[] = { 0x9c, 0x9d, 0x94, };
+static int jz4770_nemc_data_pins[] = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+};
+static int jz4770_nemc_cle_ale_pins[] = { 0x20, 0x21, };
+static int jz4770_nemc_addr_pins[] = { 0x22, 0x23, 0x24, 0x25, };
+static int jz4770_nemc_rd_we_pins[] = { 0x10, 0x11, };
+static int jz4770_nemc_frd_fwe_pins[] = { 0x12, 0x13, };
+static int jz4770_nemc_cs1_pins[] = { 0x15, };
+static int jz4770_nemc_cs2_pins[] = { 0x16, };
+static int jz4770_nemc_cs3_pins[] = { 0x17, };
+static int jz4770_nemc_cs4_pins[] = { 0x18, };
+static int jz4770_nemc_cs5_pins[] = { 0x19, };
+static int jz4770_nemc_cs6_pins[] = { 0x1a, };
+static int jz4770_i2c0_pins[] = { 0x6e, 0x6f, };
+static int jz4770_i2c1_pins[] = { 0x8e, 0x8f, };
+static int jz4770_i2c2_pins[] = { 0xb0, 0xb1, };
+static int jz4770_i2c3_pins[] = { 0x6a, 0x6b, };
+static int jz4770_i2c4_e_pins[] = { 0x8c, 0x8d, };
+static int jz4770_i2c4_f_pins[] = { 0xb9, 0xb8, };
+static int jz4770_cim_pins[] = {
+ 0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, 0x30, 0x31,
+};
+static int jz4770_lcd_32bit_pins[] = {
+ 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
+ 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
+ 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57,
+ 0x58, 0x59, 0x51,
+};
+static int jz4770_pwm_pwm0_pins[] = { 0x80, };
+static int jz4770_pwm_pwm1_pins[] = { 0x81, };
+static int jz4770_pwm_pwm2_pins[] = { 0x82, };
+static int jz4770_pwm_pwm3_pins[] = { 0x83, };
+static int jz4770_pwm_pwm4_pins[] = { 0x84, };
+static int jz4770_pwm_pwm5_pins[] = { 0x85, };
+static int jz4770_pwm_pwm6_pins[] = { 0x6a, };
+static int jz4770_pwm_pwm7_pins[] = { 0x6b, };
+
+static int jz4770_uart0_data_funcs[] = { 0, 0, };
+static int jz4770_uart0_hwflow_funcs[] = { 0, 0, };
+static int jz4770_uart1_data_funcs[] = { 0, 0, };
+static int jz4770_uart1_hwflow_funcs[] = { 0, 0, };
+static int jz4770_uart2_data_funcs[] = { 1, 1, };
+static int jz4770_uart2_hwflow_funcs[] = { 1, 1, };
+static int jz4770_uart3_data_funcs[] = { 0, 1, };
+static int jz4770_uart3_hwflow_funcs[] = { 0, 0, };
+static int jz4770_uart4_data_funcs[] = { 2, 2, };
+static int jz4770_mmc0_8bit_a_funcs[] = { 1, 1, 1, 1, 1, };
+static int jz4770_mmc0_4bit_a_funcs[] = { 1, 1, 1, };
+static int jz4770_mmc0_1bit_a_funcs[] = { 1, 1, 0, };
+static int jz4770_mmc0_4bit_e_funcs[] = { 0, 0, 0, };
+static int jz4770_mmc0_1bit_e_funcs[] = { 0, 0, 0, };
+static int jz4770_mmc1_4bit_d_funcs[] = { 0, 0, 0, };
+static int jz4770_mmc1_1bit_d_funcs[] = { 0, 0, 0, };
+static int jz4770_mmc1_4bit_e_funcs[] = { 1, 1, 1, };
+static int jz4770_mmc1_1bit_e_funcs[] = { 1, 1, 1, };
+static int jz4770_nemc_data_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, };
+static int jz4770_nemc_cle_ale_funcs[] = { 0, 0, };
+static int jz4770_nemc_addr_funcs[] = { 0, 0, 0, 0, };
+static int jz4770_nemc_rd_we_funcs[] = { 0, 0, };
+static int jz4770_nemc_frd_fwe_funcs[] = { 0, 0, };
+static int jz4770_nemc_cs1_funcs[] = { 0, };
+static int jz4770_nemc_cs2_funcs[] = { 0, };
+static int jz4770_nemc_cs3_funcs[] = { 0, };
+static int jz4770_nemc_cs4_funcs[] = { 0, };
+static int jz4770_nemc_cs5_funcs[] = { 0, };
+static int jz4770_nemc_cs6_funcs[] = { 0, };
+static int jz4770_i2c0_funcs[] = { 0, 0, };
+static int jz4770_i2c1_funcs[] = { 0, 0, };
+static int jz4770_i2c2_funcs[] = { 2, 2, };
+static int jz4770_i2c3_funcs[] = { 1, 1, };
+static int jz4770_i2c4_e_funcs[] = { 1, 1, };
+static int jz4770_i2c4_f_funcs[] = { 1, 1, };
+static int jz4770_cim_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, };
+static int jz4770_lcd_32bit_funcs[] = {
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0,
+};
+static int jz4770_pwm_pwm0_funcs[] = { 0, };
+static int jz4770_pwm_pwm1_funcs[] = { 0, };
+static int jz4770_pwm_pwm2_funcs[] = { 0, };
+static int jz4770_pwm_pwm3_funcs[] = { 0, };
+static int jz4770_pwm_pwm4_funcs[] = { 0, };
+static int jz4770_pwm_pwm5_funcs[] = { 0, };
+static int jz4770_pwm_pwm6_funcs[] = { 0, };
+static int jz4770_pwm_pwm7_funcs[] = { 0, };
+
+static const struct group_desc jz4770_groups[] = {
+ INGENIC_PIN_GROUP("uart0-data", jz4770_uart0_data),
+ INGENIC_PIN_GROUP("uart0-hwflow", jz4770_uart0_hwflow),
+ INGENIC_PIN_GROUP("uart1-data", jz4770_uart1_data),
+ INGENIC_PIN_GROUP("uart1-hwflow", jz4770_uart1_hwflow),
+ INGENIC_PIN_GROUP("uart2-data", jz4770_uart2_data),
+ INGENIC_PIN_GROUP("uart2-hwflow", jz4770_uart2_hwflow),
+ INGENIC_PIN_GROUP("uart3-data", jz4770_uart3_data),
+ INGENIC_PIN_GROUP("uart3-hwflow", jz4770_uart3_hwflow),
+ INGENIC_PIN_GROUP("uart4-data", jz4770_uart4_data),
+ INGENIC_PIN_GROUP("mmc0-8bit-a", jz4770_mmc0_8bit_a),
+ INGENIC_PIN_GROUP("mmc0-4bit-a", jz4770_mmc0_4bit_a),
+ INGENIC_PIN_GROUP("mmc0-1bit-a", jz4770_mmc0_1bit_a),
+ INGENIC_PIN_GROUP("mmc0-4bit-e", jz4770_mmc0_4bit_e),
+ INGENIC_PIN_GROUP("mmc0-1bit-e", jz4770_mmc0_1bit_e),
+ INGENIC_PIN_GROUP("mmc1-4bit-d", jz4770_mmc1_4bit_d),
+ INGENIC_PIN_GROUP("mmc1-1bit-d", jz4770_mmc1_1bit_d),
+ INGENIC_PIN_GROUP("mmc1-4bit-e", jz4770_mmc1_4bit_e),
+ INGENIC_PIN_GROUP("mmc1-1bit-e", jz4770_mmc1_1bit_e),
+ INGENIC_PIN_GROUP("nemc-data", jz4770_nemc_data),
+ INGENIC_PIN_GROUP("nemc-cle-ale", jz4770_nemc_cle_ale),
+ INGENIC_PIN_GROUP("nemc-addr", jz4770_nemc_addr),
+ INGENIC_PIN_GROUP("nemc-rd-we", jz4770_nemc_rd_we),
+ INGENIC_PIN_GROUP("nemc-frd-fwe", jz4770_nemc_frd_fwe),
+ INGENIC_PIN_GROUP("nemc-cs1", jz4770_nemc_cs1),
+ INGENIC_PIN_GROUP("nemc-cs2", jz4770_nemc_cs2),
+ INGENIC_PIN_GROUP("nemc-cs3", jz4770_nemc_cs3),
+ INGENIC_PIN_GROUP("nemc-cs4", jz4770_nemc_cs4),
+ INGENIC_PIN_GROUP("nemc-cs5", jz4770_nemc_cs5),
+ INGENIC_PIN_GROUP("nemc-cs6", jz4770_nemc_cs6),
+ INGENIC_PIN_GROUP("i2c0-data", jz4770_i2c0),
+ INGENIC_PIN_GROUP("i2c1-data", jz4770_i2c1),
+ INGENIC_PIN_GROUP("i2c2-data", jz4770_i2c2),
+ INGENIC_PIN_GROUP("i2c3-data", jz4770_i2c3),
+ INGENIC_PIN_GROUP("i2c4-data-e", jz4770_i2c4_e),
+ INGENIC_PIN_GROUP("i2c4-data-f", jz4770_i2c4_f),
+ INGENIC_PIN_GROUP("cim-data", jz4770_cim),
+ INGENIC_PIN_GROUP("lcd-32bit", jz4770_lcd_32bit),
+ { "lcd-no-pins", },
+ INGENIC_PIN_GROUP("pwm0", jz4770_pwm_pwm0),
+ INGENIC_PIN_GROUP("pwm1", jz4770_pwm_pwm1),
+ INGENIC_PIN_GROUP("pwm2", jz4770_pwm_pwm2),
+ INGENIC_PIN_GROUP("pwm3", jz4770_pwm_pwm3),
+ INGENIC_PIN_GROUP("pwm4", jz4770_pwm_pwm4),
+ INGENIC_PIN_GROUP("pwm5", jz4770_pwm_pwm5),
+ INGENIC_PIN_GROUP("pwm6", jz4770_pwm_pwm6),
+ INGENIC_PIN_GROUP("pwm7", jz4770_pwm_pwm7),
+};
+
+static const char *jz4770_uart0_groups[] = { "uart0-data", "uart0-hwflow", };
+static const char *jz4770_uart1_groups[] = { "uart1-data", "uart1-hwflow", };
+static const char *jz4770_uart2_groups[] = { "uart2-data", "uart2-hwflow", };
+static const char *jz4770_uart3_groups[] = { "uart3-data", "uart3-hwflow", };
+static const char *jz4770_uart4_groups[] = { "uart4-data", };
+static const char *jz4770_mmc0_groups[] = {
+ "mmc0-8bit-a", "mmc0-4bit-a", "mmc0-1bit-a",
+ "mmc0-1bit-e", "mmc0-4bit-e",
+};
+static const char *jz4770_mmc1_groups[] = {
+ "mmc1-1bit-d", "mmc1-4bit-d", "mmc1-1bit-e", "mmc1-4bit-e",
+};
+static const char *jz4770_nemc_groups[] = {
+ "nemc-data", "nemc-cle-ale", "nemc-addr", "nemc-rd-we", "nemc-frd-fwe",
+};
+static const char *jz4770_cs1_groups[] = { "nemc-cs1", };
+static const char *jz4770_cs6_groups[] = { "nemc-cs6", };
+static const char *jz4770_i2c0_groups[] = { "i2c0-data", };
+static const char *jz4770_i2c1_groups[] = { "i2c1-data", };
+static const char *jz4770_i2c2_groups[] = { "i2c2-data", };
+static const char *jz4770_i2c3_groups[] = { "i2c3-data", };
+static const char *jz4770_i2c4_groups[] = { "i2c4-data-e", "i2c4-data-f", };
+static const char *jz4770_cim_groups[] = { "cim-data", };
+static const char *jz4770_lcd_groups[] = { "lcd-32bit", "lcd-no-pins", };
+static const char *jz4770_pwm0_groups[] = { "pwm0", };
+static const char *jz4770_pwm1_groups[] = { "pwm1", };
+static const char *jz4770_pwm2_groups[] = { "pwm2", };
+static const char *jz4770_pwm3_groups[] = { "pwm3", };
+static const char *jz4770_pwm4_groups[] = { "pwm4", };
+static const char *jz4770_pwm5_groups[] = { "pwm5", };
+static const char *jz4770_pwm6_groups[] = { "pwm6", };
+static const char *jz4770_pwm7_groups[] = { "pwm7", };
+
+static const struct function_desc jz4770_functions[] = {
+ { "uart0", jz4770_uart0_groups, ARRAY_SIZE(jz4770_uart0_groups), },
+ { "uart1", jz4770_uart1_groups, ARRAY_SIZE(jz4770_uart1_groups), },
+ { "uart2", jz4770_uart2_groups, ARRAY_SIZE(jz4770_uart2_groups), },
+ { "uart3", jz4770_uart3_groups, ARRAY_SIZE(jz4770_uart3_groups), },
+ { "uart4", jz4770_uart4_groups, ARRAY_SIZE(jz4770_uart4_groups), },
+ { "mmc0", jz4770_mmc0_groups, ARRAY_SIZE(jz4770_mmc0_groups), },
+ { "mmc1", jz4770_mmc1_groups, ARRAY_SIZE(jz4770_mmc1_groups), },
+ { "nemc", jz4770_nemc_groups, ARRAY_SIZE(jz4770_nemc_groups), },
+ { "nemc-cs1", jz4770_cs1_groups, ARRAY_SIZE(jz4770_cs1_groups), },
+ { "nemc-cs6", jz4770_cs6_groups, ARRAY_SIZE(jz4770_cs6_groups), },
+ { "i2c0", jz4770_i2c0_groups, ARRAY_SIZE(jz4770_i2c0_groups), },
+ { "i2c1", jz4770_i2c1_groups, ARRAY_SIZE(jz4770_i2c1_groups), },
+ { "i2c2", jz4770_i2c2_groups, ARRAY_SIZE(jz4770_i2c2_groups), },
+ { "i2c3", jz4770_i2c3_groups, ARRAY_SIZE(jz4770_i2c3_groups), },
+ { "i2c4", jz4770_i2c4_groups, ARRAY_SIZE(jz4770_i2c4_groups), },
+ { "cim", jz4770_cim_groups, ARRAY_SIZE(jz4770_cim_groups), },
+ { "lcd", jz4770_lcd_groups, ARRAY_SIZE(jz4770_lcd_groups), },
+ { "pwm0", jz4770_pwm0_groups, ARRAY_SIZE(jz4770_pwm0_groups), },
+ { "pwm1", jz4770_pwm1_groups, ARRAY_SIZE(jz4770_pwm1_groups), },
+ { "pwm2", jz4770_pwm2_groups, ARRAY_SIZE(jz4770_pwm2_groups), },
+ { "pwm3", jz4770_pwm3_groups, ARRAY_SIZE(jz4770_pwm3_groups), },
+ { "pwm4", jz4770_pwm4_groups, ARRAY_SIZE(jz4770_pwm4_groups), },
+ { "pwm5", jz4770_pwm5_groups, ARRAY_SIZE(jz4770_pwm5_groups), },
+ { "pwm6", jz4770_pwm6_groups, ARRAY_SIZE(jz4770_pwm6_groups), },
+ { "pwm7", jz4770_pwm7_groups, ARRAY_SIZE(jz4770_pwm7_groups), },
+};
+
+static const struct ingenic_chip_info jz4770_chip_info = {
+ .num_chips = 6,
+ .groups = jz4770_groups,
+ .num_groups = ARRAY_SIZE(jz4770_groups),
+ .functions = jz4770_functions,
+ .num_functions = ARRAY_SIZE(jz4770_functions),
+ .pull_ups = jz4770_pull_ups,
+ .pull_downs = jz4770_pull_downs,
+};
+
+static inline void ingenic_config_pin(struct ingenic_pinctrl *jzpc,
+ unsigned int pin, u8 reg, bool set)
+{
+ unsigned int idx = pin % PINS_PER_GPIO_CHIP;
+ unsigned int offt = pin / PINS_PER_GPIO_CHIP;
+
+ regmap_write(jzpc->map, offt * 0x100 +
+ (set ? REG_SET(reg) : REG_CLEAR(reg)), BIT(idx));
+}
+
+static inline bool ingenic_get_pin_config(struct ingenic_pinctrl *jzpc,
+ unsigned int pin, u8 reg)
+{
+ unsigned int idx = pin % PINS_PER_GPIO_CHIP;
+ unsigned int offt = pin / PINS_PER_GPIO_CHIP;
+ unsigned int val;
+
+ regmap_read(jzpc->map, offt * 0x100 + reg, &val);
+
+ return val & BIT(idx);
+}
+
+static struct pinctrl_ops ingenic_pctlops = {
+ .get_groups_count = pinctrl_generic_get_group_count,
+ .get_group_name = pinctrl_generic_get_group_name,
+ .get_group_pins = pinctrl_generic_get_group_pins,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_all,
+ .dt_free_map = pinconf_generic_dt_free_map,
+};
+
+static int ingenic_pinmux_set_pin_fn(struct ingenic_pinctrl *jzpc,
+ int pin, int func)
+{
+ unsigned int idx = pin % PINS_PER_GPIO_CHIP;
+ unsigned int offt = pin / PINS_PER_GPIO_CHIP;
+
+ dev_dbg(jzpc->dev, "set pin P%c%u to function %u\n",
+ 'A' + offt, idx, func);
+
+ if (jzpc->version >= ID_JZ4770) {
+ ingenic_config_pin(jzpc, pin, JZ4770_GPIO_INT, false);
+ ingenic_config_pin(jzpc, pin, JZ4770_GPIO_MSK, false);
+ ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, func & 0x2);
+ ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT0, func & 0x1);
+ } else {
+ ingenic_config_pin(jzpc, pin, JZ4740_GPIO_FUNC, true);
+ ingenic_config_pin(jzpc, pin, JZ4740_GPIO_TRIG, func & 0x2);
+ ingenic_config_pin(jzpc, pin, JZ4740_GPIO_SELECT, func > 0);
+ }
+
+ return 0;
+}
+
+static int ingenic_pinmux_set_mux(struct pinctrl_dev *pctldev,
+ unsigned int selector, unsigned int group)
+{
+ struct ingenic_pinctrl *jzpc = pinctrl_dev_get_drvdata(pctldev);
+ struct function_desc *func;
+ struct group_desc *grp;
+ unsigned int i;
+
+ func = pinmux_generic_get_function(pctldev, selector);
+ if (!func)
+ return -EINVAL;
+
+ grp = pinctrl_generic_get_group(pctldev, group);
+ if (!grp)
+ return -EINVAL;
+
+ dev_dbg(pctldev->dev, "enable function %s group %s\n",
+ func->name, grp->name);
+
+ for (i = 0; i < grp->num_pins; i++) {
+ int *pin_modes = grp->data;
+
+ ingenic_pinmux_set_pin_fn(jzpc, grp->pins[i], pin_modes[i]);
+ }
+
+ return 0;
+}
+
+static int ingenic_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned int pin, bool input)
+{
+ struct ingenic_pinctrl *jzpc = pinctrl_dev_get_drvdata(pctldev);
+ unsigned int idx = pin % PINS_PER_GPIO_CHIP;
+ unsigned int offt = pin / PINS_PER_GPIO_CHIP;
+
+ dev_dbg(pctldev->dev, "set pin P%c%u to %sput\n",
+ 'A' + offt, idx, input ? "in" : "out");
+
+ if (jzpc->version >= ID_JZ4770) {
+ ingenic_config_pin(jzpc, pin, JZ4770_GPIO_INT, false);
+ ingenic_config_pin(jzpc, pin, JZ4770_GPIO_MSK, true);
+ ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, input);
+ } else {
+ ingenic_config_pin(jzpc, pin, JZ4740_GPIO_SELECT, false);
+ ingenic_config_pin(jzpc, pin, JZ4740_GPIO_DIR, input);
+ ingenic_config_pin(jzpc, pin, JZ4740_GPIO_FUNC, false);
+ }
+
+ return 0;
+}
+
+static struct pinmux_ops ingenic_pmxops = {
+ .get_functions_count = pinmux_generic_get_function_count,
+ .get_function_name = pinmux_generic_get_function_name,
+ .get_function_groups = pinmux_generic_get_function_groups,
+ .set_mux = ingenic_pinmux_set_mux,
+ .gpio_set_direction = ingenic_pinmux_gpio_set_direction,
+};
+
+static int ingenic_pinconf_get(struct pinctrl_dev *pctldev,
+ unsigned int pin, unsigned long *config)
+{
+ struct ingenic_pinctrl *jzpc = pinctrl_dev_get_drvdata(pctldev);
+ enum pin_config_param param = pinconf_to_config_param(*config);
+ unsigned int idx = pin % PINS_PER_GPIO_CHIP;
+ unsigned int offt = pin / PINS_PER_GPIO_CHIP;
+ bool pull;
+
+ if (jzpc->version >= ID_JZ4770)
+ pull = !ingenic_get_pin_config(jzpc, pin, JZ4770_GPIO_PEN);
+ else
+ pull = !ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_PULL_DIS);
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ if (pull)
+ return -EINVAL;
+ break;
+
+ case PIN_CONFIG_BIAS_PULL_UP:
+ if (!pull || !(jzpc->info->pull_ups[offt] & BIT(idx)))
+ return -EINVAL;
+ break;
+
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ if (!pull || !(jzpc->info->pull_downs[offt] & BIT(idx)))
+ return -EINVAL;
+ break;
+
+ default:
+ return -ENOTSUPP;
+ }
+
+ *config = pinconf_to_config_packed(param, 1);
+ return 0;
+}
+
+static void ingenic_set_bias(struct ingenic_pinctrl *jzpc,
+ unsigned int pin, bool enabled)
+{
+ if (jzpc->version >= ID_JZ4770)
+ ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PEN, !enabled);
+ else
+ ingenic_config_pin(jzpc, pin, JZ4740_GPIO_PULL_DIS, !enabled);
+}
+
+static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
+ unsigned long *configs, unsigned int num_configs)
+{
+ struct ingenic_pinctrl *jzpc = pinctrl_dev_get_drvdata(pctldev);
+ unsigned int idx = pin % PINS_PER_GPIO_CHIP;
+ unsigned int offt = pin / PINS_PER_GPIO_CHIP;
+ unsigned int cfg;
+
+ for (cfg = 0; cfg < num_configs; cfg++) {
+ switch (pinconf_to_config_param(configs[cfg])) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ case PIN_CONFIG_BIAS_PULL_UP:
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ continue;
+ default:
+ return -ENOTSUPP;
+ }
+ }
+
+ for (cfg = 0; cfg < num_configs; cfg++) {
+ switch (pinconf_to_config_param(configs[cfg])) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ dev_dbg(jzpc->dev, "disable pull-over for pin P%c%u\n",
+ 'A' + offt, idx);
+ ingenic_set_bias(jzpc, pin, false);
+ break;
+
+ case PIN_CONFIG_BIAS_PULL_UP:
+ if (!(jzpc->info->pull_ups[offt] & BIT(idx)))
+ return -EINVAL;
+ dev_dbg(jzpc->dev, "set pull-up for pin P%c%u\n",
+ 'A' + offt, idx);
+ ingenic_set_bias(jzpc, pin, true);
+ break;
+
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ if (!(jzpc->info->pull_downs[offt] & BIT(idx)))
+ return -EINVAL;
+ dev_dbg(jzpc->dev, "set pull-down for pin P%c%u\n",
+ 'A' + offt, idx);
+ ingenic_set_bias(jzpc, pin, true);
+ break;
+
+ default:
+ unreachable();
+ }
+ }
+
+ return 0;
+}
+
+static int ingenic_pinconf_group_get(struct pinctrl_dev *pctldev,
+ unsigned int group, unsigned long *config)
+{
+ const unsigned int *pins;
+ unsigned int i, npins, old = 0;
+ int ret;
+
+ ret = pinctrl_generic_get_group_pins(pctldev, group, &pins, &npins);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < npins; i++) {
+ if (ingenic_pinconf_get(pctldev, pins[i], config))
+ return -ENOTSUPP;
+
+ /* configs do not match between two pins */
+ if (i && (old != *config))
+ return -ENOTSUPP;
+
+ old = *config;
+ }
+
+ return 0;
+}
+
+static int ingenic_pinconf_group_set(struct pinctrl_dev *pctldev,
+ unsigned int group, unsigned long *configs,
+ unsigned int num_configs)
+{
+ const unsigned int *pins;
+ unsigned int i, npins;
+ int ret;
+
+ ret = pinctrl_generic_get_group_pins(pctldev, group, &pins, &npins);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < npins; i++) {
+ ret = ingenic_pinconf_set(pctldev,
+ pins[i], configs, num_configs);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct pinconf_ops ingenic_confops = {
+ .is_generic = true,
+ .pin_config_get = ingenic_pinconf_get,
+ .pin_config_set = ingenic_pinconf_set,
+ .pin_config_group_get = ingenic_pinconf_group_get,
+ .pin_config_group_set = ingenic_pinconf_group_set,
+};
+
+static const struct regmap_config ingenic_pinctrl_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
+static const struct of_device_id ingenic_pinctrl_of_match[] = {
+ { .compatible = "ingenic,jz4740-pinctrl", .data = (void *) ID_JZ4740 },
+ { .compatible = "ingenic,jz4770-pinctrl", .data = (void *) ID_JZ4770 },
+ { .compatible = "ingenic,jz4780-pinctrl", .data = (void *) ID_JZ4780 },
+ {},
+};
+
+int ingenic_pinctrl_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ingenic_pinctrl *jzpc;
+ struct pinctrl_desc *pctl_desc;
+ void __iomem *base;
+ const struct platform_device_id *id = platform_get_device_id(pdev);
+ const struct of_device_id *of_id = of_match_device(
+ ingenic_pinctrl_of_match, dev);
+ const struct ingenic_chip_info *chip_info;
+ unsigned int i;
+ int err;
+
+ jzpc = devm_kzalloc(dev, sizeof(*jzpc), GFP_KERNEL);
+ if (!jzpc)
+ return -ENOMEM;
+
+ base = devm_ioremap_resource(dev,
+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
+ if (IS_ERR(base)) {
+ dev_err(dev, "Failed to ioremap registers\n");
+ return PTR_ERR(base);
+ }
+
+ jzpc->map = devm_regmap_init_mmio(dev, base,
+ &ingenic_pinctrl_regmap_config);
+ if (IS_ERR(jzpc->map)) {
+ dev_err(dev, "Failed to create regmap\n");
+ return PTR_ERR(jzpc->map);
+ }
+
+ jzpc->dev = dev;
+
+ if (of_id)
+ jzpc->version = (enum jz_version)of_id->data;
+ else
+ jzpc->version = (enum jz_version)id->driver_data;
+
+ if (jzpc->version >= ID_JZ4770)
+ chip_info = &jz4770_chip_info;
+ else
+ chip_info = &jz4740_chip_info;
+ jzpc->info = chip_info;
+
+ pctl_desc = devm_kzalloc(&pdev->dev, sizeof(*pctl_desc), GFP_KERNEL);
+ if (!pctl_desc)
+ return -ENOMEM;
+
+ /* fill in pinctrl_desc structure */
+ pctl_desc->name = dev_name(dev);
+ pctl_desc->owner = THIS_MODULE;
+ pctl_desc->pctlops = &ingenic_pctlops;
+ pctl_desc->pmxops = &ingenic_pmxops;
+ pctl_desc->confops = &ingenic_confops;
+ pctl_desc->npins = chip_info->num_chips * PINS_PER_GPIO_CHIP;
+ pctl_desc->pins = jzpc->pdesc = devm_kzalloc(&pdev->dev,
+ sizeof(*jzpc->pdesc) * pctl_desc->npins, GFP_KERNEL);
+ if (!jzpc->pdesc)
+ return -ENOMEM;
+
+ for (i = 0; i < pctl_desc->npins; i++) {
+ jzpc->pdesc[i].number = i;
+ jzpc->pdesc[i].name = kasprintf(GFP_KERNEL, "P%c%d",
+ 'A' + (i / PINS_PER_GPIO_CHIP),
+ i % PINS_PER_GPIO_CHIP);
+ }
+
+ jzpc->pctl = devm_pinctrl_register(dev, pctl_desc, jzpc);
+ if (!jzpc->pctl) {
+ dev_err(dev, "Failed to register pinctrl\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < chip_info->num_groups; i++) {
+ const struct group_desc *group = &chip_info->groups[i];
+
+ err = pinctrl_generic_add_group(jzpc->pctl, group->name,
+ group->pins, group->num_pins, group->data);
+ if (err) {
+ dev_err(dev, "Failed to register group %s\n",
+ group->name);
+ return err;
+ }
+ }
+
+ for (i = 0; i < chip_info->num_functions; i++) {
+ const struct function_desc *func = &chip_info->functions[i];
+
+ err = pinmux_generic_add_function(jzpc->pctl, func->name,
+ func->group_names, func->num_group_names,
+ func->data);
+ if (err) {
+ dev_err(dev, "Failed to register function %s\n",
+ func->name);
+ return err;
+ }
+ }
+
+ dev_set_drvdata(dev, jzpc->map);
+
+ if (dev->of_node) {
+ err = of_platform_populate(dev->of_node, NULL, NULL, dev);
+ if (err) {
+ dev_err(dev, "Failed to probe GPIO devices\n");
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id ingenic_pinctrl_ids[] = {
+ { "jz4740-pinctrl", ID_JZ4740 },
+ { "jz4770-pinctrl", ID_JZ4770 },
+ { "jz4780-pinctrl", ID_JZ4780 },
+ {},
+};
+
+static struct platform_driver ingenic_pinctrl_driver = {
+ .driver = {
+ .name = "pinctrl-ingenic",
+ .of_match_table = of_match_ptr(ingenic_pinctrl_of_match),
+ .suppress_bind_attrs = true,
+ },
+ .probe = ingenic_pinctrl_probe,
+ .id_table = ingenic_pinctrl_ids,
+};
+
+static int __init ingenic_pinctrl_drv_register(void)
+{
+ return platform_driver_register(&ingenic_pinctrl_driver);
+}
+postcore_initcall(ingenic_pinctrl_drv_register);
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v5 04/14] GPIO: Add gpio-ingenic driver
From: Paul Cercueil @ 2017-04-28 20:08 UTC (permalink / raw)
To: Linus Walleij, Alexandre Courbot, Rob Herring, Mark Rutland,
Ralf Baechle
Cc: Boris Brezillon, Thierry Reding, Bartlomiej Zolnierkiewicz,
Maarten ter Huurne, Lars-Peter Clausen, Paul Burton,
james.hogan-1AXoQHu6uovQT0dZR+AlfA,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-mips-6z/3iImG2C8G8FEW9MqTrA,
linux-mmc-u79uwXL29TY76Z2rM5mHXA,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-pwm-u79uwXL29TY76Z2rM5mHXA,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA, Paul Cercueil
In-Reply-To: <20170428200824.10906-1-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
This driver handles the GPIOs of all the Ingenic JZ47xx SoCs
currently supported by the upsteam Linux kernel.
Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
---
drivers/gpio/Kconfig | 10 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-ingenic.c | 399 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 410 insertions(+)
create mode 100644 drivers/gpio/gpio-ingenic.c
v2: Consider it's a new patch. Completely rewritten from v1.
v3: Add missing include <linux/pinctrl/consumer.h> and drop semicolon after }
v4: Completely rewritten from v3.
v5: Get bank number from 'reg' property; drop dependency on PINCTRL_INGENIC
(note: selecting PINCTRL would cause cyclic Kconfig dependencies, that's
why I just dropped the dependency on PINCTRL_INGENIC)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 05043071fc98..7a5f9cf123c1 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -241,6 +241,16 @@ config GPIO_ICH
If unsure, say N.
+config GPIO_INGENIC
+ tristate "Ingenic JZ47xx SoCs GPIO support"
+ depends on MACH_INGENIC || COMPILE_TEST
+ select GPIOLIB_IRQCHIP
+ help
+ Say yes here to support the GPIO functionality present on the
+ JZ4740 and JZ4780 SoCs from Ingenic.
+
+ If unsure, say N.
+
config GPIO_IOP
tristate "Intel IOP GPIO"
depends on ARCH_IOP32X || ARCH_IOP33X || COMPILE_TEST
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index becb96c724fe..3fceb4ab3ca7 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_GPIO_GPIO_MM) += gpio-gpio-mm.o
obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o
obj-$(CONFIG_HTC_EGPIO) += gpio-htc-egpio.o
obj-$(CONFIG_GPIO_ICH) += gpio-ich.o
+obj-$(CONFIG_GPIO_INGENIC) += gpio-ingenic.o
obj-$(CONFIG_GPIO_IOP) += gpio-iop.o
obj-$(CONFIG_GPIO_IT87) += gpio-it87.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
diff --git a/drivers/gpio/gpio-ingenic.c b/drivers/gpio/gpio-ingenic.c
new file mode 100644
index 000000000000..34e9339bd815
--- /dev/null
+++ b/drivers/gpio/gpio-ingenic.c
@@ -0,0 +1,399 @@
+/*
+ * Ingenic JZ47xx GPIO driver
+ *
+ * Copyright (c) 2017 Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/regmap.h>
+
+#define GPIO_PIN 0x00
+#define GPIO_MSK 0x20
+
+#define JZ4740_GPIO_DATA 0x10
+#define JZ4740_GPIO_SELECT 0x50
+#define JZ4740_GPIO_DIR 0x60
+#define JZ4740_GPIO_TRIG 0x70
+#define JZ4740_GPIO_FLAG 0x80
+
+#define JZ4770_GPIO_INT 0x10
+#define JZ4770_GPIO_PAT1 0x30
+#define JZ4770_GPIO_PAT0 0x40
+#define JZ4770_GPIO_FLAG 0x50
+
+#define REG_SET(x) ((x) + 0x4)
+#define REG_CLEAR(x) ((x) + 0x8)
+
+enum jz_version {
+ ID_JZ4740,
+ ID_JZ4770,
+ ID_JZ4780,
+};
+
+struct ingenic_gpio_chip {
+ struct regmap *map;
+ struct gpio_chip gc;
+ struct irq_chip irq_chip;
+ unsigned int irq, reg_base;
+ enum jz_version version;
+};
+
+static u32 gpio_ingenic_read_reg(struct ingenic_gpio_chip *jzgc, u8 reg)
+{
+ unsigned int val;
+
+ regmap_read(jzgc->map, jzgc->reg_base + reg, &val);
+
+ return (u32) val;
+}
+
+static void gpio_ingenic_set_bit(struct ingenic_gpio_chip *jzgc,
+ u8 reg, u8 offset, bool set)
+{
+ if (set)
+ reg = REG_SET(reg);
+ else
+ reg = REG_CLEAR(reg);
+
+ regmap_write(jzgc->map, jzgc->reg_base + reg, BIT(offset));
+}
+
+static inline bool gpio_get_value(struct ingenic_gpio_chip *jzgc, u8 offset)
+{
+ unsigned int val;
+
+ if (jzgc->version >= ID_JZ4770)
+ val = gpio_ingenic_read_reg(jzgc, GPIO_PIN);
+ else
+ val = gpio_ingenic_read_reg(jzgc, JZ4740_GPIO_DATA);
+
+ return !!(val & BIT(offset));
+}
+
+static void gpio_set_value(struct ingenic_gpio_chip *jzgc, u8 offset, int value)
+{
+ if (jzgc->version >= ID_JZ4770)
+ gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_PAT0, offset, !!value);
+ else
+ gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_DATA, offset, !!value);
+}
+
+static void irq_set_type(struct ingenic_gpio_chip *jzgc,
+ u8 offset, unsigned int type)
+{
+ u8 reg1, reg2;
+
+ if (jzgc->version >= ID_JZ4770) {
+ reg1 = JZ4770_GPIO_PAT1;
+ reg2 = JZ4770_GPIO_PAT0;
+ } else {
+ reg1 = JZ4740_GPIO_TRIG;
+ reg2 = JZ4740_GPIO_DIR;
+ }
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ gpio_ingenic_set_bit(jzgc, reg2, offset, true);
+ gpio_ingenic_set_bit(jzgc, reg1, offset, true);
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ gpio_ingenic_set_bit(jzgc, reg2, offset, false);
+ gpio_ingenic_set_bit(jzgc, reg1, offset, true);
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ gpio_ingenic_set_bit(jzgc, reg2, offset, true);
+ gpio_ingenic_set_bit(jzgc, reg1, offset, false);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ default:
+ gpio_ingenic_set_bit(jzgc, reg2, offset, false);
+ gpio_ingenic_set_bit(jzgc, reg1, offset, false);
+ break;
+ }
+}
+
+static void ingenic_gpio_irq_mask(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+ gpio_ingenic_set_bit(jzgc, GPIO_MSK, irqd->hwirq, true);
+}
+
+static void ingenic_gpio_irq_unmask(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+ gpio_ingenic_set_bit(jzgc, GPIO_MSK, irqd->hwirq, false);
+}
+
+static void ingenic_gpio_irq_enable(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+ int irq = irqd->hwirq;
+
+ if (jzgc->version >= ID_JZ4770)
+ gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_INT, irq, true);
+ else
+ gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, true);
+
+ ingenic_gpio_irq_unmask(irqd);
+}
+
+static void ingenic_gpio_irq_disable(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+ int irq = irqd->hwirq;
+
+ ingenic_gpio_irq_mask(irqd);
+
+ if (jzgc->version >= ID_JZ4770)
+ gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_INT, irq, false);
+ else
+ gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, false);
+}
+
+static void ingenic_gpio_irq_ack(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+ int irq = irqd->hwirq;
+ bool high;
+
+ if (irqd_get_trigger_type(irqd) == IRQ_TYPE_EDGE_BOTH) {
+ /*
+ * Switch to an interrupt for the opposite edge to the one that
+ * triggered the interrupt being ACKed.
+ */
+ high = gpio_get_value(jzgc, irq);
+ if (high)
+ irq_set_type(jzgc, irq, IRQ_TYPE_EDGE_FALLING);
+ else
+ irq_set_type(jzgc, irq, IRQ_TYPE_EDGE_RISING);
+ }
+
+ if (jzgc->version >= ID_JZ4770)
+ gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_FLAG, irq, false);
+ else
+ gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_DATA, irq, true);
+}
+
+static int ingenic_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_BOTH:
+ case IRQ_TYPE_EDGE_RISING:
+ case IRQ_TYPE_EDGE_FALLING:
+ irq_set_handler_locked(irqd, handle_edge_irq);
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ case IRQ_TYPE_LEVEL_LOW:
+ irq_set_handler_locked(irqd, handle_level_irq);
+ break;
+ default:
+ irq_set_handler_locked(irqd, handle_bad_irq);
+ }
+
+ if (type == IRQ_TYPE_EDGE_BOTH) {
+ /*
+ * The hardware does not support interrupts on both edges. The
+ * best we can do is to set up a single-edge interrupt and then
+ * switch to the opposing edge when ACKing the interrupt.
+ */
+ bool high = gpio_get_value(jzgc, irqd->hwirq);
+
+ type = high ? IRQ_TYPE_EDGE_FALLING : IRQ_TYPE_EDGE_RISING;
+ }
+
+ irq_set_type(jzgc, irqd->hwirq, type);
+ return 0;
+}
+
+static int ingenic_gpio_irq_set_wake(struct irq_data *irqd, unsigned int on)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+ return irq_set_irq_wake(jzgc->irq, on);
+}
+
+static void ingenic_gpio_irq_handler(struct irq_desc *desc)
+{
+ struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+ struct irq_chip *irq_chip = irq_data_get_irq_chip(&desc->irq_data);
+ unsigned long flag, i;
+
+ chained_irq_enter(irq_chip, desc);
+
+ if (jzgc->version >= ID_JZ4770)
+ flag = gpio_ingenic_read_reg(jzgc, JZ4770_GPIO_FLAG);
+ else
+ flag = gpio_ingenic_read_reg(jzgc, JZ4740_GPIO_FLAG);
+
+ for_each_set_bit(i, &flag, 32)
+ generic_handle_irq(irq_linear_revmap(gc->irqdomain, i));
+ chained_irq_exit(irq_chip, desc);
+}
+
+static void ingenic_gpio_set(struct gpio_chip *gc,
+ unsigned int offset, int value)
+{
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+ gpio_set_value(jzgc, offset, value);
+}
+
+static int ingenic_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+ return (int) gpio_get_value(jzgc, offset);
+}
+
+static int ingenic_gpio_direction_input(struct gpio_chip *gc,
+ unsigned int offset)
+{
+ return pinctrl_gpio_direction_input(gc->base + offset);
+}
+
+static int ingenic_gpio_direction_output(struct gpio_chip *gc,
+ unsigned int offset, int value)
+{
+ ingenic_gpio_set(gc, offset, value);
+ return pinctrl_gpio_direction_output(gc->base + offset);
+}
+
+static const struct of_device_id ingenic_gpio_of_match[] = {
+ { .compatible = "ingenic,jz4740-gpio", .data = (void *)ID_JZ4740 },
+ { .compatible = "ingenic,jz4770-gpio", .data = (void *)ID_JZ4770 },
+ { .compatible = "ingenic,jz4780-gpio", .data = (void *)ID_JZ4780 },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ingenic_gpio_of_match);
+
+static int ingenic_gpio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *of_id = of_match_device(
+ ingenic_gpio_of_match, dev);
+ struct ingenic_gpio_chip *jzgc;
+ u32 bank;
+ int err;
+
+ jzgc = devm_kzalloc(dev, sizeof(*jzgc), GFP_KERNEL);
+ if (!jzgc)
+ return -ENOMEM;
+
+ jzgc->map = dev_get_drvdata(dev->parent);
+ if (!jzgc->map) {
+ dev_err(dev, "Cannot get parent regmap\n");
+ return -ENXIO;
+ }
+
+ err = of_property_read_u32(dev->of_node, "reg", &bank);
+ if (err) {
+ dev_err(dev, "Cannot read \"reg\" property: %i\n", err);
+ return err;
+ }
+
+ jzgc->reg_base = bank * 0x100;
+
+ jzgc->gc.label = devm_kasprintf(dev, GFP_KERNEL, "GPIO%c", 'A' + bank);
+ if (!jzgc->gc.label)
+ return -ENOMEM;
+
+ /* DO NOT EXPAND THIS: FOR BACKWARD GPIO NUMBERSPACE COMPATIBIBILITY
+ * ONLY: WORK TO TRANSITION CONSUMERS TO USE THE GPIO DESCRIPTOR API IN
+ * <linux/gpio/consumer.h> INSTEAD.
+ */
+ jzgc->gc.base = bank * 32;
+
+ jzgc->gc.ngpio = 32;
+ jzgc->gc.parent = dev;
+ jzgc->gc.of_node = dev->of_node;
+ jzgc->gc.owner = THIS_MODULE;
+ jzgc->version = (enum jz_version)of_id->data;
+
+ jzgc->gc.set = ingenic_gpio_set;
+ jzgc->gc.get = ingenic_gpio_get;
+ jzgc->gc.direction_input = ingenic_gpio_direction_input;
+ jzgc->gc.direction_output = ingenic_gpio_direction_output;
+
+ if (of_property_read_bool(dev->of_node, "gpio-ranges")) {
+ jzgc->gc.request = gpiochip_generic_request;
+ jzgc->gc.free = gpiochip_generic_free;
+ }
+
+ err = devm_gpiochip_add_data(dev, &jzgc->gc, jzgc);
+ if (err)
+ return err;
+
+ jzgc->irq = irq_of_parse_and_map(dev->of_node, 0);
+ if (!jzgc->irq)
+ return -EINVAL;
+
+ jzgc->irq_chip.name = jzgc->gc.label;
+ jzgc->irq_chip.irq_enable = ingenic_gpio_irq_enable;
+ jzgc->irq_chip.irq_disable = ingenic_gpio_irq_disable;
+ jzgc->irq_chip.irq_unmask = ingenic_gpio_irq_unmask;
+ jzgc->irq_chip.irq_mask = ingenic_gpio_irq_mask;
+ jzgc->irq_chip.irq_ack = ingenic_gpio_irq_ack;
+ jzgc->irq_chip.irq_set_type = ingenic_gpio_irq_set_type;
+ jzgc->irq_chip.irq_set_wake = ingenic_gpio_irq_set_wake;
+ jzgc->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND;
+
+ err = gpiochip_irqchip_add(&jzgc->gc, &jzgc->irq_chip, 0,
+ handle_level_irq, IRQ_TYPE_NONE);
+ if (err)
+ return err;
+
+ gpiochip_set_chained_irqchip(&jzgc->gc, &jzgc->irq_chip,
+ jzgc->irq, ingenic_gpio_irq_handler);
+ return 0;
+}
+
+static int ingenic_gpio_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver ingenic_gpio_driver = {
+ .driver = {
+ .name = "gpio-ingenic",
+ .of_match_table = of_match_ptr(ingenic_gpio_of_match),
+ },
+ .probe = ingenic_gpio_probe,
+ .remove = ingenic_gpio_remove,
+};
+
+static int __init ingenic_gpio_drv_register(void)
+{
+ return platform_driver_register(&ingenic_gpio_driver);
+}
+subsys_initcall(ingenic_gpio_drv_register);
+
+static void __exit ingenic_gpio_drv_unregister(void)
+{
+ platform_driver_unregister(&ingenic_gpio_driver);
+}
+module_exit(ingenic_gpio_drv_unregister);
+
+MODULE_AUTHOR("Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>");
+MODULE_DESCRIPTION("Ingenic JZ47xx GPIO driver");
+MODULE_LICENSE("GPL");
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v5 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs
From: Paul Cercueil @ 2017-04-28 20:08 UTC (permalink / raw)
To: Linus Walleij, Alexandre Courbot, Rob Herring, Mark Rutland,
Ralf Baechle
Cc: Boris Brezillon, Thierry Reding, Bartlomiej Zolnierkiewicz,
Maarten ter Huurne, Lars-Peter Clausen, Paul Burton,
james.hogan-1AXoQHu6uovQT0dZR+AlfA,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-mips-6z/3iImG2C8G8FEW9MqTrA,
linux-mmc-u79uwXL29TY76Z2rM5mHXA,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-pwm-u79uwXL29TY76Z2rM5mHXA,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA, Paul Cercueil
In-Reply-To: <20170428200824.10906-1-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
There is a pinctrl driver for each of the Ingenic SoCs supported by the
upstream Linux kernel. In order to switch away from the old GPIO
platform code, we now enable the pinctrl drivers by default for the
Ingenic SoCs.
Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
---
arch/mips/Kconfig | 1 +
1 file changed, 1 insertion(+)
v2: No changes
v3: No changes
v4: No changes
v5: No changes
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e0bb576410bb..771995b75e0d 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -363,6 +363,7 @@ config MACH_INGENIC
select SYS_SUPPORTS_ZBOOT_UART16550
select DMA_NONCOHERENT
select IRQ_MIPS_CPU
+ select PINCTRL
select GPIOLIB
select COMMON_CLK
select GENERIC_IRQ_CHIP
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v5 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers
From: Paul Cercueil @ 2017-04-28 20:08 UTC (permalink / raw)
To: Linus Walleij, Alexandre Courbot, Rob Herring, Mark Rutland,
Ralf Baechle
Cc: Boris Brezillon, Thierry Reding, Bartlomiej Zolnierkiewicz,
Maarten ter Huurne, Lars-Peter Clausen, Paul Burton,
james.hogan-1AXoQHu6uovQT0dZR+AlfA,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-mips-6z/3iImG2C8G8FEW9MqTrA,
linux-mmc-u79uwXL29TY76Z2rM5mHXA,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-pwm-u79uwXL29TY76Z2rM5mHXA,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA, Paul Cercueil
In-Reply-To: <20170428200824.10906-1-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
For a description of the pinctrl devicetree node, please read
Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
For a description of the gpio devicetree nodes, please read
Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
---
arch/mips/boot/dts/ingenic/jz4740.dtsi | 68 ++++++++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)
v2: Changed the devicetree bindings to match the new driver
v3: No changes
v4: Update the bindings for the v4 version of the drivers
v5: Add 'reg' properties and rename pinctrl/gpio nodes
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
index 3e1587f1f77a..2ca7ce7481f1 100644
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -55,6 +55,74 @@
clock-names = "rtc";
};
+ pinctrl: pin-controller@10010000 {
+ compatible = "ingenic,jz4740-pinctrl";
+ reg = <0x10010000 0x400>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,jz4740-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <28>;
+ };
+
+ gpb: gpio@1 {
+ compatible = "ingenic,jz4740-gpio";
+ reg = <1>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27>;
+ };
+
+ gpc: gpio@2 {
+ compatible = "ingenic,jz4740-gpio";
+ reg = <2>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <26>;
+ };
+
+ gpd: gpio@3 {
+ compatible = "ingenic,jz4740-gpio";
+ reg = <3>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <25>;
+ };
+ };
+
uart0: serial@10030000 {
compatible = "ingenic,jz4740-uart";
reg = <0x10030000 0x100>;
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v5 07/14] MIPS: jz4780: DTS: Add nodes for ingenic pinctrl and gpio drivers
From: Paul Cercueil @ 2017-04-28 20:08 UTC (permalink / raw)
To: Linus Walleij, Alexandre Courbot, Rob Herring, Mark Rutland,
Ralf Baechle
Cc: Boris Brezillon, Thierry Reding, Bartlomiej Zolnierkiewicz,
Maarten ter Huurne, Lars-Peter Clausen, Paul Burton, james.hogan,
linux-gpio, devicetree, linux-kernel, linux-mips, linux-mmc,
linux-mtd, linux-pwm, linux-fbdev, Paul Cercueil
In-Reply-To: <20170428200824.10906-1-paul@crapouillou.net>
For a description of the devicetree node, please read
Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
For a description of the gpio devicetree nodes, please read
Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
arch/mips/boot/dts/ingenic/jz4780.dtsi | 98 ++++++++++++++++++++++++++++++++++
1 file changed, 98 insertions(+)
v2: Changed the devicetree bindings to match the new driver
v3: No changes
v4: Update the bindings for the v4 version of the drivers
v5: Add 'reg' properties and rename pinctrl/gpio nodes
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index b868b429add2..4853ef67b3ab 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -44,6 +44,104 @@
#clock-cells = <1>;
};
+ pinctrl: pin-controller@10010000 {
+ compatible = "ingenic,jz4780-pinctrl";
+ reg = <0x10010000 0x600>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,jz4780-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+ };
+
+ gpb: gpio@1 {
+ compatible = "ingenic,jz4780-gpio";
+ reg = <1>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <16>;
+ };
+
+ gpc: gpio@2 {
+ compatible = "ingenic,jz4780-gpio";
+ reg = <2>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <15>;
+ };
+
+ gpd: gpio@3 {
+ compatible = "ingenic,jz4780-gpio";
+ reg = <3>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <14>;
+ };
+
+ gpe: gpio@4 {
+ compatible = "ingenic,jz4780-gpio";
+ reg = <4>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 128 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <13>;
+ };
+
+ gpf: gpio@5 {
+ compatible = "ingenic,jz4780-gpio";
+ reg = <5>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 160 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+ };
+ };
+
uart0: serial@10030000 {
compatible = "ingenic,jz4780-uart";
reg = <0x10030000 0x100>;
--
2.11.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox