* [PATCH V5 04/12] clk: sprd: add mux clock support
From: Chunyan Zhang @ 2017-11-20 6:01 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette, Rob Herring, Mark Rutland
Cc: Catalin Marinas, Will Deacon, linux-clk, linux-kernel, devicetree,
linux-arm-kernel, Arnd Bergmann, Mark Brown, Xiaolong Zhang,
Ben Li, Orson Zhai, Chunyan Zhang
In-Reply-To: <20171120060137.27380-1-chunyan.zhang@spreadtrum.com>
This patch adds clock multiplexor support for Spreadtrum platforms,
the mux clocks also can be found in sprd composite clocks, so
provides two helpers that can be reused later on.
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
drivers/clk/sprd/Makefile | 1 +
drivers/clk/sprd/mux.c | 78 +++++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/sprd/mux.h | 76 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 155 insertions(+)
create mode 100644 drivers/clk/sprd/mux.c
create mode 100644 drivers/clk/sprd/mux.h
diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
index 8cd5592..cee36b5 100644
--- a/drivers/clk/sprd/Makefile
+++ b/drivers/clk/sprd/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_SPRD_COMMON_CLK) += clk-sprd.o
clk-sprd-y += common.o
clk-sprd-y += gate.o
+clk-sprd-y += mux.o
diff --git a/drivers/clk/sprd/mux.c b/drivers/clk/sprd/mux.c
new file mode 100644
index 0000000..05ef9f0
--- /dev/null
+++ b/drivers/clk/sprd/mux.c
@@ -0,0 +1,78 @@
+/*
+ * Spreadtrum multiplexer clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+
+#include "mux.h"
+
+u8 sprd_mux_helper_get_parent(const struct sprd_clk_common *common,
+ const struct sprd_mux_ssel *mux)
+{
+ unsigned int reg;
+ u8 parent;
+ int num_parents;
+ int i;
+
+ sprd_regmap_read(common->regmap, common->reg, ®);
+ parent = reg >> mux->shift;
+ parent &= (1 << mux->width) - 1;
+
+ if (!mux->table)
+ return parent;
+
+ num_parents = clk_hw_get_num_parents(&common->hw);
+
+ for (i = 0; i < num_parents - 1; i++)
+ if (parent >= mux->table[i] && parent < mux->table[i + 1])
+ return i;
+
+ return num_parents - 1;
+}
+EXPORT_SYMBOL_GPL(sprd_mux_helper_get_parent);
+
+static u8 sprd_mux_get_parent(struct clk_hw *hw)
+{
+ struct sprd_mux *cm = hw_to_sprd_mux(hw);
+
+ return sprd_mux_helper_get_parent(&cm->common, &cm->mux);
+}
+
+int sprd_mux_helper_set_parent(const struct sprd_clk_common *common,
+ const struct sprd_mux_ssel *mux,
+ u8 index)
+{
+ unsigned int reg;
+
+ if (mux->table)
+ index = mux->table[index];
+
+ sprd_regmap_read(common->regmap, common->reg, ®);
+ reg &= ~GENMASK(mux->width + mux->shift - 1, mux->shift);
+ sprd_regmap_write(common->regmap, common->reg,
+ reg | (index << mux->shift));
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(sprd_mux_helper_set_parent);
+
+static int sprd_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct sprd_mux *cm = hw_to_sprd_mux(hw);
+
+ return sprd_mux_helper_set_parent(&cm->common, &cm->mux, index);
+}
+
+const struct clk_ops sprd_mux_ops = {
+ .get_parent = sprd_mux_get_parent,
+ .set_parent = sprd_mux_set_parent,
+ .determine_rate = __clk_mux_determine_rate,
+};
+EXPORT_SYMBOL_GPL(sprd_mux_ops);
diff --git a/drivers/clk/sprd/mux.h b/drivers/clk/sprd/mux.h
new file mode 100644
index 0000000..683d63a
--- /dev/null
+++ b/drivers/clk/sprd/mux.h
@@ -0,0 +1,76 @@
+/*
+ * Spreadtrum multiplexer clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _SPRD_MUX_H_
+#define _SPRD_MUX_H_
+
+#include "common.h"
+
+/**
+ * struct sprd_mux_ssel - Mux clock's source select bits in its register
+ * @shift: Bit offset of the divider in its register
+ * @width: Width of the divider field in its register
+ * @table: For some mux clocks, not all sources are used on some special
+ * chips, this matches the value of mux clock's register and the
+ * sources which are used for this mux clock
+ */
+struct sprd_mux_ssel {
+ u8 shift;
+ u8 width;
+ const u8 *table;
+};
+
+struct sprd_mux {
+ struct sprd_mux_ssel mux;
+ struct sprd_clk_common common;
+};
+
+#define _SPRD_MUX_CLK(_shift, _width, _table) \
+ { \
+ .shift = _shift, \
+ .width = _width, \
+ .table = _table, \
+ }
+
+#define SPRD_MUX_CLK_TABLE(_struct, _name, _parents, _table, \
+ _reg, _shift, _width, \
+ _flags) \
+ struct sprd_mux _struct = { \
+ .mux = _SPRD_MUX_CLK(_shift, _width, _table), \
+ .common = { \
+ .regmap = NULL, \
+ .reg = _reg, \
+ .hw.init = CLK_HW_INIT_PARENTS(_name, \
+ _parents, \
+ &sprd_mux_ops, \
+ _flags), \
+ } \
+ }
+
+#define SPRD_MUX_CLK(_struct, _name, _parents, _reg, \
+ _shift, _width, _flags) \
+ SPRD_MUX_CLK_TABLE(_struct, _name, _parents, NULL, \
+ _reg, _shift, _width, _flags)
+
+static inline struct sprd_mux *hw_to_sprd_mux(const struct clk_hw *hw)
+{
+ struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
+
+ return container_of(common, struct sprd_mux, common);
+}
+
+extern const struct clk_ops sprd_mux_ops;
+
+u8 sprd_mux_helper_get_parent(const struct sprd_clk_common *common,
+ const struct sprd_mux_ssel *mux);
+int sprd_mux_helper_set_parent(const struct sprd_clk_common *common,
+ const struct sprd_mux_ssel *mux,
+ u8 index);
+
+#endif /* _SPRD_MUX_H_ */
--
2.7.4
^ permalink raw reply related
* [PATCH V5 05/12] clk: sprd: add divider clock support
From: Chunyan Zhang @ 2017-11-20 6:01 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette, Rob Herring, Mark Rutland
Cc: Catalin Marinas, Will Deacon, linux-clk, linux-kernel, devicetree,
linux-arm-kernel, Arnd Bergmann, Mark Brown, Xiaolong Zhang,
Ben Li, Orson Zhai, Chunyan Zhang
In-Reply-To: <20171120060137.27380-1-chunyan.zhang@spreadtrum.com>
This is a feature that can also be found in sprd composite clocks,
provide a bunch of helpers that can be reused later on.
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
drivers/clk/sprd/Makefile | 1 +
drivers/clk/sprd/div.c | 92 +++++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/sprd/div.h | 77 +++++++++++++++++++++++++++++++++++++++
3 files changed, 170 insertions(+)
create mode 100644 drivers/clk/sprd/div.c
create mode 100644 drivers/clk/sprd/div.h
diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
index cee36b5..80e6039 100644
--- a/drivers/clk/sprd/Makefile
+++ b/drivers/clk/sprd/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_SPRD_COMMON_CLK) += clk-sprd.o
clk-sprd-y += common.o
clk-sprd-y += gate.o
clk-sprd-y += mux.o
+clk-sprd-y += div.o
diff --git a/drivers/clk/sprd/div.c b/drivers/clk/sprd/div.c
new file mode 100644
index 0000000..8c7196f
--- /dev/null
+++ b/drivers/clk/sprd/div.c
@@ -0,0 +1,92 @@
+/*
+ * Spreadtrum divider clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/clk-provider.h>
+
+#include "div.h"
+
+long sprd_div_helper_round_rate(struct sprd_clk_common *common,
+ const struct sprd_div_internal *div,
+ unsigned long rate,
+ unsigned long *parent_rate)
+{
+ return divider_round_rate(&common->hw, rate, parent_rate,
+ NULL, div->width, 0);
+}
+EXPORT_SYMBOL_GPL(sprd_div_helper_round_rate);
+
+static long sprd_div_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct sprd_div *cd = hw_to_sprd_div(hw);
+
+ return sprd_div_helper_round_rate(&cd->common, &cd->div,
+ rate, parent_rate);
+}
+
+unsigned long sprd_div_helper_recalc_rate(struct sprd_clk_common *common,
+ const struct sprd_div_internal *div,
+ unsigned long parent_rate)
+{
+ unsigned long val;
+ unsigned int reg;
+
+ sprd_regmap_read(common->regmap, common->reg, ®);
+ val = reg >> div->shift;
+ val &= (1 << div->width) - 1;
+
+ return divider_recalc_rate(&common->hw, parent_rate, val, NULL, 0);
+}
+EXPORT_SYMBOL_GPL(sprd_div_helper_recalc_rate);
+
+static unsigned long sprd_div_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct sprd_div *cd = hw_to_sprd_div(hw);
+
+ return sprd_div_helper_recalc_rate(&cd->common, &cd->div, parent_rate);
+}
+
+int sprd_div_helper_set_rate(const struct sprd_clk_common *common,
+ const struct sprd_div_internal *div,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ unsigned long val;
+ unsigned int reg;
+
+ val = divider_get_val(rate, parent_rate, NULL,
+ div->width, 0);
+
+ sprd_regmap_read(common->regmap, common->reg, ®);
+ reg &= ~GENMASK(div->width + div->shift - 1, div->shift);
+
+ sprd_regmap_write(common->regmap, common->reg,
+ reg | (val << div->shift));
+
+ return 0;
+
+}
+EXPORT_SYMBOL_GPL(sprd_div_helper_set_rate);
+
+static int sprd_div_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct sprd_div *cd = hw_to_sprd_div(hw);
+
+ return sprd_div_helper_set_rate(&cd->common, &cd->div,
+ rate, parent_rate);
+}
+
+const struct clk_ops sprd_div_ops = {
+ .recalc_rate = sprd_div_recalc_rate,
+ .round_rate = sprd_div_round_rate,
+ .set_rate = sprd_div_set_rate,
+};
+EXPORT_SYMBOL_GPL(sprd_div_ops);
diff --git a/drivers/clk/sprd/div.h b/drivers/clk/sprd/div.h
new file mode 100644
index 0000000..fb59fe5
--- /dev/null
+++ b/drivers/clk/sprd/div.h
@@ -0,0 +1,77 @@
+/*
+ * Spreadtrum divider clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _SPRD_DIV_H_
+#define _SPRD_DIV_H_
+
+#include "common.h"
+
+/**
+ * struct sprd_div_internal - Internal divider description
+ * @shift: Bit offset of the divider in its register
+ * @width: Width of the divider field in its register
+ *
+ * That structure represents a single divider, and is meant to be
+ * embedded in other structures representing the various clock
+ * classes.
+ */
+struct sprd_div_internal {
+ u8 shift;
+ u8 width;
+};
+
+#define _SPRD_DIV_CLK(_shift, _width) \
+ { \
+ .shift = _shift, \
+ .width = _width, \
+ }
+
+struct sprd_div {
+ struct sprd_div_internal div;
+ struct sprd_clk_common common;
+};
+
+#define SPRD_DIV_CLK(_struct, _name, _parent, _reg, \
+ _shift, _width, _flags) \
+ struct sprd_div _struct = { \
+ .div = _SPRD_DIV_CLK(_shift, _width), \
+ .common = { \
+ .regmap = NULL, \
+ .reg = _reg, \
+ .hw.init = CLK_HW_INIT(_name, \
+ _parent, \
+ &sprd_div_ops, \
+ _flags), \
+ } \
+ }
+
+static inline struct sprd_div *hw_to_sprd_div(const struct clk_hw *hw)
+{
+ struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
+
+ return container_of(common, struct sprd_div, common);
+}
+
+long sprd_div_helper_round_rate(struct sprd_clk_common *common,
+ const struct sprd_div_internal *div,
+ unsigned long rate,
+ unsigned long *parent_rate);
+
+unsigned long sprd_div_helper_recalc_rate(struct sprd_clk_common *common,
+ const struct sprd_div_internal *div,
+ unsigned long parent_rate);
+
+int sprd_div_helper_set_rate(const struct sprd_clk_common *common,
+ const struct sprd_div_internal *div,
+ unsigned long rate,
+ unsigned long parent_rate);
+
+extern const struct clk_ops sprd_div_ops;
+
+#endif /* _SPRD_DIV_H_ */
--
2.7.4
^ permalink raw reply related
* [PATCH V5 06/12] clk: sprd: add composite clock support
From: Chunyan Zhang @ 2017-11-20 6:01 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette, Rob Herring, Mark Rutland
Cc: Catalin Marinas, Will Deacon, linux-clk, linux-kernel, devicetree,
linux-arm-kernel, Arnd Bergmann, Mark Brown, Xiaolong Zhang,
Ben Li, Orson Zhai, Chunyan Zhang
In-Reply-To: <20171120060137.27380-1-chunyan.zhang@spreadtrum.com>
This patch introduced composite driver for Spreadtrum's SoCs. The
functions of this composite clock simply consist of divider and
mux clocks.
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
drivers/clk/sprd/Makefile | 1 +
drivers/clk/sprd/composite.c | 62 ++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/sprd/composite.h | 53 +++++++++++++++++++++++++++++++++++++
3 files changed, 116 insertions(+)
create mode 100644 drivers/clk/sprd/composite.c
create mode 100644 drivers/clk/sprd/composite.h
diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
index 80e6039..2262e76 100644
--- a/drivers/clk/sprd/Makefile
+++ b/drivers/clk/sprd/Makefile
@@ -4,3 +4,4 @@ clk-sprd-y += common.o
clk-sprd-y += gate.o
clk-sprd-y += mux.o
clk-sprd-y += div.o
+clk-sprd-y += composite.o
diff --git a/drivers/clk/sprd/composite.c b/drivers/clk/sprd/composite.c
new file mode 100644
index 0000000..218e17c
--- /dev/null
+++ b/drivers/clk/sprd/composite.c
@@ -0,0 +1,62 @@
+/*
+ * Spreadtrum composite clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/clk-provider.h>
+
+#include "composite.h"
+
+static long sprd_comp_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct sprd_comp *cc = hw_to_sprd_comp(hw);
+
+ return sprd_div_helper_round_rate(&cc->common, &cc->div,
+ rate, parent_rate);
+}
+
+static unsigned long sprd_comp_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct sprd_comp *cc = hw_to_sprd_comp(hw);
+
+ return sprd_div_helper_recalc_rate(&cc->common, &cc->div, parent_rate);
+}
+
+static int sprd_comp_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct sprd_comp *cc = hw_to_sprd_comp(hw);
+
+ return sprd_div_helper_set_rate(&cc->common, &cc->div,
+ rate, parent_rate);
+}
+
+static u8 sprd_comp_get_parent(struct clk_hw *hw)
+{
+ struct sprd_comp *cc = hw_to_sprd_comp(hw);
+
+ return sprd_mux_helper_get_parent(&cc->common, &cc->mux);
+}
+
+static int sprd_comp_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct sprd_comp *cc = hw_to_sprd_comp(hw);
+
+ return sprd_mux_helper_set_parent(&cc->common, &cc->mux, index);
+}
+
+const struct clk_ops sprd_comp_ops = {
+ .get_parent = sprd_comp_get_parent,
+ .set_parent = sprd_comp_set_parent,
+
+ .round_rate = sprd_comp_round_rate,
+ .recalc_rate = sprd_comp_recalc_rate,
+ .set_rate = sprd_comp_set_rate,
+};
+EXPORT_SYMBOL_GPL(sprd_comp_ops);
diff --git a/drivers/clk/sprd/composite.h b/drivers/clk/sprd/composite.h
new file mode 100644
index 0000000..b337bda
--- /dev/null
+++ b/drivers/clk/sprd/composite.h
@@ -0,0 +1,53 @@
+/*
+ * Spreadtrum composite clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _SPRD_COMPOSITE_H_
+#define _SPRD_COMPOSITE_H_
+
+#include "common.h"
+#include "mux.h"
+#include "div.h"
+
+struct sprd_comp {
+ struct sprd_mux_ssel mux;
+ struct sprd_div_internal div;
+ struct sprd_clk_common common;
+};
+
+#define SPRD_COMP_CLK_TABLE(_struct, _name, _parent, _reg, _table, \
+ _mshift, _mwidth, _dshift, _dwidth, _flags) \
+ struct sprd_comp _struct = { \
+ .mux = _SPRD_MUX_CLK(_mshift, _mwidth, _table), \
+ .div = _SPRD_DIV_CLK(_dshift, _dwidth), \
+ .common = { \
+ .regmap = NULL, \
+ .reg = _reg, \
+ .hw.init = CLK_HW_INIT_PARENTS(_name, \
+ _parent, \
+ &sprd_comp_ops, \
+ _flags), \
+ } \
+ }
+
+#define SPRD_COMP_CLK(_struct, _name, _parent, _reg, _mshift, \
+ _mwidth, _dshift, _dwidth, _flags) \
+ SPRD_COMP_CLK_TABLE(_struct, _name, _parent, _reg, \
+ NULL, _mshift, _mwidth, \
+ _dshift, _dwidth, _flags)
+
+static inline struct sprd_comp *hw_to_sprd_comp(const struct clk_hw *hw)
+{
+ struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
+
+ return container_of(common, struct sprd_comp, common);
+}
+
+extern const struct clk_ops sprd_comp_ops;
+
+#endif /* _SPRD_COMPOSITE_H_ */
--
2.7.4
^ permalink raw reply related
* [PATCH V5 07/12] clk: sprd: add adjustable pll support
From: Chunyan Zhang @ 2017-11-20 6:01 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette, Rob Herring, Mark Rutland
Cc: Catalin Marinas, Will Deacon, linux-clk, linux-kernel, devicetree,
linux-arm-kernel, Arnd Bergmann, Mark Brown, Xiaolong Zhang,
Ben Li, Orson Zhai, Chunyan Zhang
In-Reply-To: <20171120060137.27380-1-chunyan.zhang@spreadtrum.com>
Introduced a common adjustable pll clock driver for Spreadtrum SoCs.
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
drivers/clk/sprd/Makefile | 1 +
drivers/clk/sprd/pll.c | 268 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/sprd/pll.h | 110 +++++++++++++++++++
3 files changed, 379 insertions(+)
create mode 100644 drivers/clk/sprd/pll.c
create mode 100644 drivers/clk/sprd/pll.h
diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
index 2262e76..d693969 100644
--- a/drivers/clk/sprd/Makefile
+++ b/drivers/clk/sprd/Makefile
@@ -5,3 +5,4 @@ clk-sprd-y += gate.o
clk-sprd-y += mux.o
clk-sprd-y += div.o
clk-sprd-y += composite.o
+clk-sprd-y += pll.o
diff --git a/drivers/clk/sprd/pll.c b/drivers/clk/sprd/pll.c
new file mode 100644
index 0000000..1fd8d32
--- /dev/null
+++ b/drivers/clk/sprd/pll.c
@@ -0,0 +1,268 @@
+/*
+ * Spreadtrum pll clock driver
+ *
+ * Copyright (C) 2015~2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "pll.h"
+
+#define CLK_PLL_1M 1000000
+#define CLK_PLL_10M (CLK_PLL_1M * 10)
+
+#define pindex(pll, member) \
+ (pll->factors[member].shift / (8 * sizeof(pll->regs_num)))
+
+#define pshift(pll, member) \
+ (pll->factors[member].shift % (8 * sizeof(pll->regs_num)))
+
+#define pwidth(pll, member) \
+ pll->factors[member].width
+
+#define pmask(pll, member) \
+ ((pwidth(pll, member)) ? \
+ GENMASK(pwidth(pll, member) + pshift(pll, member) - 1, \
+ pshift(pll, member)) : 0)
+
+#define pinternal(pll, cfg, member) \
+ (cfg[pindex(pll, member)] & pmask(pll, member))
+
+#define pinternal_val(pll, cfg, member) \
+ (pinternal(pll, cfg, member) >> pshift(pll, member))
+
+static inline unsigned int
+sprd_pll_read(const struct sprd_pll *pll, u8 index)
+{
+ const struct sprd_clk_common *common = &pll->common;
+ unsigned int val = 0;
+
+ if (WARN_ON(index >= pll->regs_num))
+ return 0;
+
+ sprd_regmap_read(common->regmap, common->reg + index * 4, &val);
+
+ return val;
+}
+
+static inline void
+sprd_pll_write(const struct sprd_pll *pll, u8 index,
+ u32 msk, u32 val)
+{
+ const struct sprd_clk_common *common = &pll->common;
+ unsigned int offset, reg;
+ int ret = 0;
+
+ if (WARN_ON(index >= pll->regs_num))
+ return;
+
+ offset = common->reg + index * 4;
+ ret = sprd_regmap_read(common->regmap, offset, ®);
+ if (!ret)
+ sprd_regmap_write(common->regmap, offset, (reg & ~msk) | val);
+}
+
+static unsigned long pll_get_refin(const struct sprd_pll *pll)
+{
+ u32 shift, mask, index, refin_id = 3;
+ const unsigned long refin[4] = { 2, 4, 13, 26 };
+
+ if (pwidth(pll, PLL_REFIN)) {
+ index = pindex(pll, PLL_REFIN);
+ shift = pshift(pll, PLL_REFIN);
+ mask = pmask(pll, PLL_REFIN);
+ refin_id = (sprd_pll_read(pll, index) & mask) >> shift;
+ if (refin_id > 3)
+ refin_id = 3;
+ }
+
+ return refin[refin_id];
+}
+
+static u32 pll_get_ibias(u64 rate, const u64 *table)
+{
+ u32 i, num = table[0];
+
+ for (i = 1; i < num + 1; i++)
+ if (rate <= table[i])
+ break;
+
+ return (i == num + 1) ? num : i;
+}
+
+static unsigned long _sprd_pll_recalc_rate(const struct sprd_pll *pll,
+ unsigned long parent_rate)
+{
+ u32 *cfg;
+ u32 i, mask, regs_num = pll->regs_num;
+ unsigned long rate, nint, kint = 0;
+ u64 refin;
+ u16 k1, k2;
+
+ cfg = kcalloc(regs_num, sizeof(*cfg), GFP_KERNEL);
+ if (!cfg)
+ return -ENOMEM;
+
+ for (i = 0; i < regs_num; i++)
+ cfg[i] = sprd_pll_read(pll, i);
+
+ refin = pll_get_refin(pll);
+
+ if (pinternal(pll, cfg, PLL_PREDIV))
+ refin = refin * 2;
+
+ if (pwidth(pll, PLL_POSTDIV) &&
+ ((pll->fflag == 1 && pinternal(pll, cfg, PLL_POSTDIV)) ||
+ (!pll->fflag && !pinternal(pll, cfg, PLL_POSTDIV))))
+ refin = refin / 2;
+
+ if (!pinternal(pll, cfg, PLL_DIV_S)) {
+ rate = refin * pinternal_val(pll, cfg, PLL_N) * CLK_PLL_10M;
+ } else {
+ nint = pinternal_val(pll, cfg, PLL_NINT);
+ if (pinternal(pll, cfg, PLL_SDM_EN))
+ kint = pinternal_val(pll, cfg, PLL_KINT);
+
+ mask = pmask(pll, PLL_KINT);
+
+ k1 = pll->k1;
+ k2 = pll->k2;
+ rate = DIV_ROUND_CLOSEST_ULL(refin * kint * k1,
+ ((mask >> __ffs(mask)) + 1)) *
+ k2 + refin * nint * CLK_PLL_1M;
+ }
+
+ return rate;
+}
+
+#define SPRD_PLL_WRITE_CHECK(pll, i, mask, val) \
+ (((sprd_pll_read(pll, i) & mask) == val) ? 0 : (-EFAULT))
+
+static int _sprd_pll_set_rate(const struct sprd_pll *pll,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct reg_cfg *cfg;
+ int ret = 0;
+ u32 mask, shift, width, ibias_val, index;
+ u32 regs_num = pll->regs_num, i = 0;
+ unsigned long kint, nint;
+ u64 tmp, refin, fvco = rate;
+
+ cfg = kcalloc(regs_num, sizeof(*cfg), GFP_KERNEL);
+ if (!cfg)
+ return -ENOMEM;
+
+ refin = pll_get_refin(pll);
+
+ mask = pmask(pll, PLL_PREDIV);
+ index = pindex(pll, PLL_PREDIV);
+ width = pwidth(pll, PLL_PREDIV);
+ if (width && (sprd_pll_read(pll, index) & mask))
+ refin = refin * 2;
+
+ mask = pmask(pll, PLL_POSTDIV);
+ index = pindex(pll, PLL_POSTDIV);
+ width = pwidth(pll, PLL_POSTDIV);
+ cfg[index].msk = mask;
+ if (width && ((pll->fflag == 1 && fvco <= pll->fvco) ||
+ (pll->fflag == 0 && fvco > pll->fvco)))
+ cfg[index].val |= mask;
+
+ if (width && fvco <= pll->fvco)
+ fvco = fvco * 2;
+
+ mask = pmask(pll, PLL_DIV_S);
+ index = pindex(pll, PLL_DIV_S);
+ cfg[index].val |= mask;
+ cfg[index].msk |= mask;
+
+ mask = pmask(pll, PLL_SDM_EN);
+ index = pindex(pll, PLL_SDM_EN);
+ cfg[index].val |= mask;
+ cfg[index].msk |= mask;
+
+ nint = do_div(fvco, refin * CLK_PLL_1M);
+ mask = pmask(pll, PLL_NINT);
+ index = pindex(pll, PLL_NINT);
+ shift = pshift(pll, PLL_NINT);
+ cfg[index].val |= (nint << shift) & mask;
+ cfg[index].msk |= mask;
+
+ mask = pmask(pll, PLL_KINT);
+ index = pindex(pll, PLL_KINT);
+ width = pwidth(pll, PLL_KINT);
+ shift = pshift(pll, PLL_KINT);
+ tmp = fvco - refin * nint * CLK_PLL_1M;
+ tmp = do_div(tmp, 10000) * ((mask >> shift) + 1);
+ kint = DIV_ROUND_CLOSEST_ULL(tmp, refin * 100);
+ cfg[index].val |= (kint << shift) & mask;
+ cfg[index].msk |= mask;
+
+ ibias_val = pll_get_ibias(fvco, pll->itable);
+
+ mask = pmask(pll, PLL_IBIAS);
+ index = pindex(pll, PLL_IBIAS);
+ shift = pshift(pll, PLL_IBIAS);
+ cfg[index].val |= ibias_val << shift & mask;
+ cfg[index].msk |= mask;
+
+ for (i = 0; i < regs_num; i++) {
+ if (cfg[i].msk) {
+ sprd_pll_write(pll, i, cfg[i].msk, cfg[i].val);
+ ret |= SPRD_PLL_WRITE_CHECK(pll, i, cfg[i].msk,
+ cfg[i].val);
+ }
+ }
+
+ if (!ret)
+ udelay(pll->udelay);
+
+ return ret;
+}
+
+static unsigned long sprd_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct sprd_pll *pll = hw_to_sprd_pll(hw);
+
+ return _sprd_pll_recalc_rate(pll, parent_rate);
+}
+
+static int sprd_pll_set_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct sprd_pll *pll = hw_to_sprd_pll(hw);
+
+ return _sprd_pll_set_rate(pll, rate, parent_rate);
+}
+
+static int sprd_pll_clk_prepare(struct clk_hw *hw)
+{
+ struct sprd_pll *pll = hw_to_sprd_pll(hw);
+
+ udelay(pll->udelay);
+
+ return 0;
+}
+
+static long sprd_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ return rate;
+}
+
+const struct clk_ops sprd_pll_ops = {
+ .prepare = sprd_pll_clk_prepare,
+ .recalc_rate = sprd_pll_recalc_rate,
+ .round_rate = sprd_pll_round_rate,
+ .set_rate = sprd_pll_set_rate,
+};
+EXPORT_SYMBOL_GPL(sprd_pll_ops);
diff --git a/drivers/clk/sprd/pll.h b/drivers/clk/sprd/pll.h
new file mode 100644
index 0000000..a25b003
--- /dev/null
+++ b/drivers/clk/sprd/pll.h
@@ -0,0 +1,110 @@
+/*
+ * Spreadtrum clock pll configurations
+ *
+ * Copyright (C) 2015~2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _SPRD_PLL_H_
+#define _SPRD_PLL_H_
+
+#include "common.h"
+
+struct reg_cfg {
+ u32 val;
+ u32 msk;
+};
+
+struct clk_bit_field {
+ u8 shift;
+ u8 width;
+};
+
+enum {
+ PLL_LOCK_DONE,
+ PLL_DIV_S,
+ PLL_MOD_EN,
+ PLL_SDM_EN,
+ PLL_REFIN,
+ PLL_IBIAS,
+ PLL_N,
+ PLL_NINT,
+ PLL_KINT,
+ PLL_PREDIV,
+ PLL_POSTDIV,
+
+ PLL_FACT_MAX
+};
+
+/*
+ * struct sprd_pll - definition of adjustable pll clock
+ *
+ * @reg: registers used to set the configuration of pll clock,
+ * reg[0] shows how many registers this pll clock uses.
+ * @itable: pll ibias table, itable[0] means how many items this
+ * table includes
+ * @udelay delay time after setting rate
+ * @factors used to calculate the pll clock rate
+ * @fvco: fvco threshold rate
+ * @fflag: fvco flag
+ */
+struct sprd_pll {
+ u32 regs_num;
+ const u64 *itable;
+ const struct clk_bit_field *factors;
+ u16 udelay;
+ u16 k1;
+ u16 k2;
+ u16 fflag;
+ u64 fvco;
+
+ struct sprd_clk_common common;
+};
+
+#define SPRD_PLL_WITH_ITABLE_K_FVCO(_struct, _name, _parent, _reg, \
+ _regs_num, _itable, _factors, \
+ _udelay, _k1, _k2, _fflag, _fvco) \
+ struct sprd_pll _struct = { \
+ .regs_num = _regs_num, \
+ .itable = _itable, \
+ .factors = _factors, \
+ .udelay = _udelay, \
+ .k1 = _k1, \
+ .k2 = _k2, \
+ .fflag = _fflag, \
+ .fvco = _fvco, \
+ .common = { \
+ .regmap = NULL, \
+ .reg = _reg, \
+ .hw.init = CLK_HW_INIT(_name, \
+ _parent, \
+ &sprd_pll_ops, \
+ 0), \
+ }, \
+ }
+
+#define SPRD_PLL_WITH_ITABLE_K(_struct, _name, _parent, _reg, \
+ _regs_num, _itable, _factors, \
+ _udelay, _k1, _k2) \
+ SPRD_PLL_WITH_ITABLE_K_FVCO(_struct, _name, _parent, _reg, \
+ _regs_num, _itable, _factors, \
+ _udelay, _k1, _k2, 0, 0)
+
+#define SPRD_PLL_WITH_ITABLE_1K(_struct, _name, _parent, _reg, \
+ _regs_num, _itable, _factors, _udelay) \
+ SPRD_PLL_WITH_ITABLE_K_FVCO(_struct, _name, _parent, _reg, \
+ _regs_num, _itable, _factors, \
+ _udelay, 1000, 1000, 0, 0)
+
+static inline struct sprd_pll *hw_to_sprd_pll(struct clk_hw *hw)
+{
+ struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
+
+ return container_of(common, struct sprd_pll, common);
+}
+
+extern const struct clk_ops sprd_pll_ops;
+
+#endif /* _SPRD_PLL_H_ */
--
2.7.4
^ permalink raw reply related
* [PATCH V5 08/12] dt-bindings: Add Spreadtrum clock binding documentation
From: Chunyan Zhang @ 2017-11-20 6:01 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette, Rob Herring, Mark Rutland
Cc: Catalin Marinas, Will Deacon, linux-clk, linux-kernel, devicetree,
linux-arm-kernel, Arnd Bergmann, Mark Brown, Xiaolong Zhang,
Ben Li, Orson Zhai, Chunyan Zhang
In-Reply-To: <20171120060137.27380-1-chunyan.zhang@spreadtrum.com>
Introduce a new binding with its documentation for Spreadtrum clock
sub-framework.
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/clock/sprd.txt | 63 ++++++++++++++++++++++++
1 file changed, 63 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/sprd.txt
diff --git a/Documentation/devicetree/bindings/clock/sprd.txt b/Documentation/devicetree/bindings/clock/sprd.txt
new file mode 100644
index 0000000..e9d179e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd.txt
@@ -0,0 +1,63 @@
+Spreadtrum Clock Binding
+------------------------
+
+Required properties:
+- compatible: should contain the following compatible strings:
+ - "sprd,sc9860-pmu-gate"
+ - "sprd,sc9860-pll"
+ - "sprd,sc9860-ap-clk"
+ - "sprd,sc9860-aon-prediv"
+ - "sprd,sc9860-apahb-gate"
+ - "sprd,sc9860-aon-gate"
+ - "sprd,sc9860-aonsecure-clk"
+ - "sprd,sc9860-agcp-gate"
+ - "sprd,sc9860-gpu-clk"
+ - "sprd,sc9860-vsp-clk"
+ - "sprd,sc9860-vsp-gate"
+ - "sprd,sc9860-cam-clk"
+ - "sprd,sc9860-cam-gate"
+ - "sprd,sc9860-disp-clk"
+ - "sprd,sc9860-disp-gate"
+ - "sprd,sc9860-apapb-gate"
+
+- #clock-cells: must be 1
+
+- clocks : Should be the input parent clock(s) phandle for the clock, this
+ property here just simply shows which clock group the clocks'
+ parents are in, since each clk node would represent many clocks
+ which are defined in the driver. The detailed dependency
+ relationship (i.e. how many parents and which are the parents)
+ are implemented in driver code.
+
+Optional properties:
+
+- reg: Contain the registers base address and length. It must be configured
+ only if no 'sprd,syscon' under the node.
+
+- sprd,syscon: phandle to the syscon which is in the same address area with
+ the clock, and so we can get regmap for the clocks from the
+ syscon device.
+
+Example:
+
+ pmu_gate: pmu-gate {
+ compatible = "sprd,sc9860-pmu-gate";
+ sprd,syscon = <&pmu_regs>;
+ clocks = <&ext_26m>;
+ #clock-cells = <1>;
+ };
+
+ pll: pll {
+ compatible = "sprd,sc9860-pll";
+ sprd,syscon = <&ana_regs>;
+ clocks = <&pmu_gate 0>;
+ #clock-cells = <1>;
+ };
+
+ ap_clk: clock-controller@20000000 {
+ compatible = "sprd,sc9860-ap-clk";
+ reg = <0 0x20000000 0 0x400>;
+ clocks = <&ext_26m>, <&pll 0>,
+ <&pmu_gate 0>;
+ #clock-cells = <1>;
+ };
--
2.7.4
^ permalink raw reply related
* [PATCH V5 09/12] clk: sprd: Add dt-bindings include file for SC9860
From: Chunyan Zhang @ 2017-11-20 6:01 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette, Rob Herring, Mark Rutland
Cc: Catalin Marinas, Will Deacon, linux-clk, linux-kernel, devicetree,
linux-arm-kernel, Arnd Bergmann, Mark Brown, Xiaolong Zhang,
Ben Li, Orson Zhai, Chunyan Zhang
In-Reply-To: <20171120060137.27380-1-chunyan.zhang@spreadtrum.com>
This file defines all SC9860 clock indexes, it should be included in the
device tree in which there's device using the clocks.
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Acked-by: Rob Herring <robh@kernel.org>
---
include/dt-bindings/clock/sprd,sc9860-clk.h | 408 ++++++++++++++++++++++++++++
1 file changed, 408 insertions(+)
create mode 100644 include/dt-bindings/clock/sprd,sc9860-clk.h
diff --git a/include/dt-bindings/clock/sprd,sc9860-clk.h b/include/dt-bindings/clock/sprd,sc9860-clk.h
new file mode 100644
index 0000000..48e6052
--- /dev/null
+++ b/include/dt-bindings/clock/sprd,sc9860-clk.h
@@ -0,0 +1,408 @@
+/*
+ * Spreadtrum SC9860 platform clocks
+ *
+ * Copyright (C) 2017, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#ifndef _DT_BINDINGS_CLK_SC9860_H_
+#define _DT_BINDINGS_CLK_SC9860_H_
+
+#define CLK_EXT_RCO_100M 0
+#define CLK_EXT_32K 1
+#define CLK_FAC_4M 2
+#define CLK_FAC_2M 3
+#define CLK_FAC_1M 4
+#define CLK_FAC_250K 5
+#define CLK_FAC_RPLL0_26M 6
+#define CLK_FAC_RPLL1_26M 7
+#define CLK_FAC_RCO25M 8
+#define CLK_FAC_RCO4M 9
+#define CLK_FAC_RCO2M 10
+#define CLK_FAC_3K2 11
+#define CLK_FAC_1K 12
+#define CLK_MPLL0_GATE 13
+#define CLK_MPLL1_GATE 14
+#define CLK_DPLL0_GATE 15
+#define CLK_DPLL1_GATE 16
+#define CLK_LTEPLL0_GATE 17
+#define CLK_TWPLL_GATE 18
+#define CLK_LTEPLL1_GATE 19
+#define CLK_RPLL0_GATE 20
+#define CLK_RPLL1_GATE 21
+#define CLK_CPPLL_GATE 22
+#define CLK_GPLL_GATE 23
+#define CLK_PMU_GATE_NUM (CLK_GPLL_GATE + 1)
+
+#define CLK_MPLL0 0
+#define CLK_MPLL1 1
+#define CLK_DPLL0 2
+#define CLK_DPLL1 3
+#define CLK_RPLL0 4
+#define CLK_RPLL1 5
+#define CLK_TWPLL 6
+#define CLK_LTEPLL0 7
+#define CLK_LTEPLL1 8
+#define CLK_GPLL 9
+#define CLK_CPPLL 10
+#define CLK_GPLL_42M5 11
+#define CLK_TWPLL_768M 12
+#define CLK_TWPLL_384M 13
+#define CLK_TWPLL_192M 14
+#define CLK_TWPLL_96M 15
+#define CLK_TWPLL_48M 16
+#define CLK_TWPLL_24M 17
+#define CLK_TWPLL_12M 18
+#define CLK_TWPLL_512M 19
+#define CLK_TWPLL_256M 20
+#define CLK_TWPLL_128M 21
+#define CLK_TWPLL_64M 22
+#define CLK_TWPLL_307M2 23
+#define CLK_TWPLL_153M6 24
+#define CLK_TWPLL_76M8 25
+#define CLK_TWPLL_51M2 26
+#define CLK_TWPLL_38M4 27
+#define CLK_TWPLL_19M2 28
+#define CLK_L0_614M4 29
+#define CLK_L0_409M6 30
+#define CLK_L0_38M 31
+#define CLK_L1_38M 32
+#define CLK_RPLL0_192M 33
+#define CLK_RPLL0_96M 34
+#define CLK_RPLL0_48M 35
+#define CLK_RPLL1_468M 36
+#define CLK_RPLL1_192M 37
+#define CLK_RPLL1_96M 38
+#define CLK_RPLL1_64M 39
+#define CLK_RPLL1_48M 40
+#define CLK_DPLL0_50M 41
+#define CLK_DPLL1_50M 42
+#define CLK_CPPLL_50M 43
+#define CLK_M0_39M 44
+#define CLK_M1_63M 45
+#define CLK_PLL_NUM (CLK_M1_63M + 1)
+
+
+#define CLK_AP_APB 0
+#define CLK_AP_USB3 1
+#define CLK_UART0 2
+#define CLK_UART1 3
+#define CLK_UART2 4
+#define CLK_UART3 5
+#define CLK_UART4 6
+#define CLK_I2C0 7
+#define CLK_I2C1 8
+#define CLK_I2C2 9
+#define CLK_I2C3 10
+#define CLK_I2C4 11
+#define CLK_I2C5 12
+#define CLK_SPI0 13
+#define CLK_SPI1 14
+#define CLK_SPI2 15
+#define CLK_SPI3 16
+#define CLK_IIS0 17
+#define CLK_IIS1 18
+#define CLK_IIS2 19
+#define CLK_IIS3 20
+#define CLK_AP_CLK_NUM (CLK_IIS3 + 1)
+
+#define CLK_AON_APB 0
+#define CLK_AUX0 1
+#define CLK_AUX1 2
+#define CLK_AUX2 3
+#define CLK_PROBE 4
+#define CLK_SP_AHB 5
+#define CLK_CCI 6
+#define CLK_GIC 7
+#define CLK_CSSYS 8
+#define CLK_SDIO0_2X 9
+#define CLK_SDIO1_2X 10
+#define CLK_SDIO2_2X 11
+#define CLK_EMMC_2X 12
+#define CLK_SDIO0_1X 13
+#define CLK_SDIO1_1X 14
+#define CLK_SDIO2_1X 15
+#define CLK_EMMC_1X 16
+#define CLK_ADI 17
+#define CLK_PWM0 18
+#define CLK_PWM1 19
+#define CLK_PWM2 20
+#define CLK_PWM3 21
+#define CLK_EFUSE 22
+#define CLK_CM3_UART0 23
+#define CLK_CM3_UART1 24
+#define CLK_THM 25
+#define CLK_CM3_I2C0 26
+#define CLK_CM3_I2C1 27
+#define CLK_CM4_SPI 28
+#define CLK_AON_I2C 29
+#define CLK_AVS 30
+#define CLK_CA53_DAP 31
+#define CLK_CA53_TS 32
+#define CLK_DJTAG_TCK 33
+#define CLK_PMU 34
+#define CLK_PMU_26M 35
+#define CLK_DEBOUNCE 36
+#define CLK_OTG2_REF 37
+#define CLK_USB3_REF 38
+#define CLK_AP_AXI 39
+#define CLK_AON_PREDIV_NUM (CLK_AP_AXI + 1)
+
+#define CLK_USB3_EB 0
+#define CLK_USB3_SUSPEND_EB 1
+#define CLK_USB3_REF_EB 2
+#define CLK_DMA_EB 3
+#define CLK_SDIO0_EB 4
+#define CLK_SDIO1_EB 5
+#define CLK_SDIO2_EB 6
+#define CLK_EMMC_EB 7
+#define CLK_ROM_EB 8
+#define CLK_BUSMON_EB 9
+#define CLK_CC63S_EB 10
+#define CLK_CC63P_EB 11
+#define CLK_CE0_EB 12
+#define CLK_CE1_EB 13
+#define CLK_APAHB_GATE_NUM (CLK_CE1_EB + 1)
+
+#define CLK_AVS_LIT_EB 0
+#define CLK_AVS_BIG_EB 1
+#define CLK_AP_INTC5_EB 2
+#define CLK_GPIO_EB 3
+#define CLK_PWM0_EB 4
+#define CLK_PWM1_EB 5
+#define CLK_PWM2_EB 6
+#define CLK_PWM3_EB 7
+#define CLK_KPD_EB 8
+#define CLK_AON_SYS_EB 9
+#define CLK_AP_SYS_EB 10
+#define CLK_AON_TMR_EB 11
+#define CLK_AP_TMR0_EB 12
+#define CLK_EFUSE_EB 13
+#define CLK_EIC_EB 14
+#define CLK_PUB1_REG_EB 15
+#define CLK_ADI_EB 16
+#define CLK_AP_INTC0_EB 17
+#define CLK_AP_INTC1_EB 18
+#define CLK_AP_INTC2_EB 19
+#define CLK_AP_INTC3_EB 20
+#define CLK_AP_INTC4_EB 21
+#define CLK_SPLK_EB 22
+#define CLK_MSPI_EB 23
+#define CLK_PUB0_REG_EB 24
+#define CLK_PIN_EB 25
+#define CLK_AON_CKG_EB 26
+#define CLK_GPU_EB 27
+#define CLK_APCPU_TS0_EB 28
+#define CLK_APCPU_TS1_EB 29
+#define CLK_DAP_EB 30
+#define CLK_I2C_EB 31
+#define CLK_PMU_EB 32
+#define CLK_THM_EB 33
+#define CLK_AUX0_EB 34
+#define CLK_AUX1_EB 35
+#define CLK_AUX2_EB 36
+#define CLK_PROBE_EB 37
+#define CLK_GPU0_AVS_EB 38
+#define CLK_GPU1_AVS_EB 39
+#define CLK_APCPU_WDG_EB 40
+#define CLK_AP_TMR1_EB 41
+#define CLK_AP_TMR2_EB 42
+#define CLK_DISP_EMC_EB 43
+#define CLK_ZIP_EMC_EB 44
+#define CLK_GSP_EMC_EB 45
+#define CLK_OSC_AON_EB 46
+#define CLK_LVDS_TRX_EB 47
+#define CLK_LVDS_TCXO_EB 48
+#define CLK_MDAR_EB 49
+#define CLK_RTC4M0_CAL_EB 50
+#define CLK_RCT100M_CAL_EB 51
+#define CLK_DJTAG_EB 52
+#define CLK_MBOX_EB 53
+#define CLK_AON_DMA_EB 54
+#define CLK_DBG_EMC_EB 55
+#define CLK_LVDS_PLL_DIV_EN 56
+#define CLK_DEF_EB 57
+#define CLK_AON_APB_RSV0 58
+#define CLK_ORP_JTAG_EB 59
+#define CLK_VSP_EB 60
+#define CLK_CAM_EB 61
+#define CLK_DISP_EB 62
+#define CLK_DBG_AXI_IF_EB 63
+#define CLK_SDIO0_2X_EN 64
+#define CLK_SDIO1_2X_EN 65
+#define CLK_SDIO2_2X_EN 66
+#define CLK_EMMC_2X_EN 67
+#define CLK_AON_GATE_NUM (CLK_EMMC_2X_EN + 1)
+
+#define CLK_LIT_MCU 0
+#define CLK_BIG_MCU 1
+#define CLK_AONSECURE_NUM (CLK_BIG_MCU + 1)
+
+#define CLK_AGCP_IIS0_EB 0
+#define CLK_AGCP_IIS1_EB 1
+#define CLK_AGCP_IIS2_EB 2
+#define CLK_AGCP_IIS3_EB 3
+#define CLK_AGCP_UART_EB 4
+#define CLK_AGCP_DMACP_EB 5
+#define CLK_AGCP_DMAAP_EB 6
+#define CLK_AGCP_ARC48K_EB 7
+#define CLK_AGCP_SRC44P1K_EB 8
+#define CLK_AGCP_MCDT_EB 9
+#define CLK_AGCP_VBCIFD_EB 10
+#define CLK_AGCP_VBC_EB 11
+#define CLK_AGCP_SPINLOCK_EB 12
+#define CLK_AGCP_ICU_EB 13
+#define CLK_AGCP_AP_ASHB_EB 14
+#define CLK_AGCP_CP_ASHB_EB 15
+#define CLK_AGCP_AUD_EB 16
+#define CLK_AGCP_AUDIF_EB 17
+#define CLK_AGCP_GATE_NUM (CLK_AGCP_AUDIF_EB + 1)
+
+#define CLK_GPU 0
+#define CLK_GPU_NUM (CLK_GPU + 1)
+
+#define CLK_AHB_VSP 0
+#define CLK_VSP 1
+#define CLK_VSP_ENC 2
+#define CLK_VPP 3
+#define CLK_VSP_26M 4
+#define CLK_VSP_NUM (CLK_VSP_26M + 1)
+
+#define CLK_VSP_DEC_EB 0
+#define CLK_VSP_CKG_EB 1
+#define CLK_VSP_MMU_EB 2
+#define CLK_VSP_ENC_EB 3
+#define CLK_VPP_EB 4
+#define CLK_VSP_26M_EB 5
+#define CLK_VSP_AXI_GATE 6
+#define CLK_VSP_ENC_GATE 7
+#define CLK_VPP_AXI_GATE 8
+#define CLK_VSP_BM_GATE 9
+#define CLK_VSP_ENC_BM_GATE 10
+#define CLK_VPP_BM_GATE 11
+#define CLK_VSP_GATE_NUM (CLK_VPP_BM_GATE + 1)
+
+#define CLK_AHB_CAM 0
+#define CLK_SENSOR0 1
+#define CLK_SENSOR1 2
+#define CLK_SENSOR2 3
+#define CLK_MIPI_CSI0_EB 4
+#define CLK_MIPI_CSI1_EB 5
+#define CLK_CAM_NUM (CLK_MIPI_CSI1_EB + 1)
+
+#define CLK_DCAM0_EB 0
+#define CLK_DCAM1_EB 1
+#define CLK_ISP0_EB 2
+#define CLK_CSI0_EB 3
+#define CLK_CSI1_EB 4
+#define CLK_JPG0_EB 5
+#define CLK_JPG1_EB 6
+#define CLK_CAM_CKG_EB 7
+#define CLK_CAM_MMU_EB 8
+#define CLK_ISP1_EB 9
+#define CLK_CPP_EB 10
+#define CLK_MMU_PF_EB 11
+#define CLK_ISP2_EB 12
+#define CLK_DCAM2ISP_IF_EB 13
+#define CLK_ISP2DCAM_IF_EB 14
+#define CLK_ISP_LCLK_EB 15
+#define CLK_ISP_ICLK_EB 16
+#define CLK_ISP_MCLK_EB 17
+#define CLK_ISP_PCLK_EB 18
+#define CLK_ISP_ISP2DCAM_EB 19
+#define CLK_DCAM0_IF_EB 20
+#define CLK_CLK26M_IF_EB 21
+#define CLK_CPHY0_GATE 22
+#define CLK_MIPI_CSI0_GATE 23
+#define CLK_CPHY1_GATE 24
+#define CLK_MIPI_CSI1 25
+#define CLK_DCAM0_AXI_GATE 26
+#define CLK_DCAM1_AXI_GATE 27
+#define CLK_SENSOR0_GATE 28
+#define CLK_SENSOR1_GATE 29
+#define CLK_JPG0_AXI_GATE 30
+#define CLK_GPG1_AXI_GATE 31
+#define CLK_ISP0_AXI_GATE 32
+#define CLK_ISP1_AXI_GATE 33
+#define CLK_ISP2_AXI_GATE 34
+#define CLK_CPP_AXI_GATE 35
+#define CLK_D0_IF_AXI_GATE 36
+#define CLK_D2I_IF_AXI_GATE 37
+#define CLK_I2D_IF_AXI_GATE 38
+#define CLK_SPARE_AXI_GATE 39
+#define CLK_SENSOR2_GATE 40
+#define CLK_D0IF_IN_D_EN 41
+#define CLK_D1IF_IN_D_EN 42
+#define CLK_D0IF_IN_D2I_EN 43
+#define CLK_D1IF_IN_D2I_EN 44
+#define CLK_IA_IN_D2I_EN 45
+#define CLK_IB_IN_D2I_EN 46
+#define CLK_IC_IN_D2I_EN 47
+#define CLK_IA_IN_I_EN 48
+#define CLK_IB_IN_I_EN 49
+#define CLK_IC_IN_I_EN 50
+#define CLK_CAM_GATE_NUM (CLK_IC_IN_I_EN + 1)
+
+#define CLK_AHB_DISP 0
+#define CLK_DISPC0_DPI 1
+#define CLK_DISPC1_DPI 2
+#define CLK_DISP_NUM (CLK_DISPC1_DPI + 1)
+
+#define CLK_DISPC0_EB 0
+#define CLK_DISPC1_EB 1
+#define CLK_DISPC_MMU_EB 2
+#define CLK_GSP0_EB 3
+#define CLK_GSP1_EB 4
+#define CLK_GSP0_MMU_EB 5
+#define CLK_GSP1_MMU_EB 6
+#define CLK_DSI0_EB 7
+#define CLK_DSI1_EB 8
+#define CLK_DISP_CKG_EB 9
+#define CLK_DISP_GPU_EB 10
+#define CLK_GPU_MTX_EB 11
+#define CLK_GSP_MTX_EB 12
+#define CLK_TMC_MTX_EB 13
+#define CLK_DISPC_MTX_EB 14
+#define CLK_DPHY0_GATE 15
+#define CLK_DPHY1_GATE 16
+#define CLK_GSP0_A_GATE 17
+#define CLK_GSP1_A_GATE 18
+#define CLK_GSP0_F_GATE 19
+#define CLK_GSP1_F_GATE 20
+#define CLK_D_MTX_F_GATE 21
+#define CLK_D_MTX_A_GATE 22
+#define CLK_D_NOC_F_GATE 23
+#define CLK_D_NOC_A_GATE 24
+#define CLK_GSP_MTX_F_GATE 25
+#define CLK_GSP_MTX_A_GATE 26
+#define CLK_GSP_NOC_F_GATE 27
+#define CLK_GSP_NOC_A_GATE 28
+#define CLK_DISPM0IDLE_GATE 29
+#define CLK_GSPM0IDLE_GATE 30
+#define CLK_DISP_GATE_NUM (CLK_GSPM0IDLE_GATE + 1)
+
+#define CLK_SIM0_EB 0
+#define CLK_IIS0_EB 1
+#define CLK_IIS1_EB 2
+#define CLK_IIS2_EB 3
+#define CLK_IIS3_EB 4
+#define CLK_SPI0_EB 5
+#define CLK_SPI1_EB 6
+#define CLK_SPI2_EB 7
+#define CLK_I2C0_EB 8
+#define CLK_I2C1_EB 9
+#define CLK_I2C2_EB 10
+#define CLK_I2C3_EB 11
+#define CLK_I2C4_EB 12
+#define CLK_I2C5_EB 13
+#define CLK_UART0_EB 14
+#define CLK_UART1_EB 15
+#define CLK_UART2_EB 16
+#define CLK_UART3_EB 17
+#define CLK_UART4_EB 18
+#define CLK_AP_CKG_EB 19
+#define CLK_SPI3_EB 20
+#define CLK_APAPB_GATE_NUM (CLK_SPI3_EB + 1)
+
+#endif /* _DT_BINDINGS_CLK_SC9860_H_ */
--
2.7.4
^ permalink raw reply related
* [PATCH V5 10/12] clk: sprd: add clocks support for SC9860
From: Chunyan Zhang @ 2017-11-20 6:01 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette, Rob Herring, Mark Rutland
Cc: Catalin Marinas, Will Deacon, linux-clk, linux-kernel, devicetree,
linux-arm-kernel, Arnd Bergmann, Mark Brown, Xiaolong Zhang,
Ben Li, Orson Zhai, Chunyan Zhang
In-Reply-To: <20171120060137.27380-1-chunyan.zhang@spreadtrum.com>
This patch added the list of clocks for Spreadtrum's SC9860 SoC,
together with clock initialization code.
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
drivers/clk/sprd/Kconfig | 10 +
drivers/clk/sprd/Makefile | 3 +
drivers/clk/sprd/sc9860-clk.c | 1987 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 2000 insertions(+)
create mode 100644 drivers/clk/sprd/sc9860-clk.c
diff --git a/drivers/clk/sprd/Kconfig b/drivers/clk/sprd/Kconfig
index 67a3287..8789247 100644
--- a/drivers/clk/sprd/Kconfig
+++ b/drivers/clk/sprd/Kconfig
@@ -2,3 +2,13 @@ config SPRD_COMMON_CLK
tristate "Clock support for Spreadtrum SoCs"
depends on ARCH_SPRD || COMPILE_TEST
default ARCH_SPRD
+
+if SPRD_COMMON_CLK
+
+# SoC Drivers
+
+config SPRD_SC9860_CLK
+ tristate "Support for the Spreadtrum SC9860 clocks"
+ depends on (ARM64 && ARCH_SPRD) || COMPILE_TEST
+ default ARM64 && ARCH_SPRD
+endif
diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
index d693969..b0d81e5 100644
--- a/drivers/clk/sprd/Makefile
+++ b/drivers/clk/sprd/Makefile
@@ -6,3 +6,6 @@ clk-sprd-y += mux.o
clk-sprd-y += div.o
clk-sprd-y += composite.o
clk-sprd-y += pll.o
+
+## SoC support
+obj-$(CONFIG_SPRD_SC9860_CLK) += sc9860-clk.o
diff --git a/drivers/clk/sprd/sc9860-clk.c b/drivers/clk/sprd/sc9860-clk.c
new file mode 100644
index 0000000..caf7194
--- /dev/null
+++ b/drivers/clk/sprd/sc9860-clk.c
@@ -0,0 +1,1987 @@
+/*
+ * Spreatrum SC9860 clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/sprd,sc9860-clk.h>
+
+#include "common.h"
+#include "composite.h"
+#include "div.h"
+#include "gate.h"
+#include "mux.h"
+#include "pll.h"
+
+static CLK_FIXED_RATE(ext_rco_100m, "ext-rco-100m", 0, 100000000, 0);
+static CLK_FIXED_RATE(ext_32k, "ext-32k", 0, 32768, 0);
+
+static CLK_FIXED_FACTOR(fac_4m, "fac-4m", "ext-26m",
+ 6, 1, 0);
+static CLK_FIXED_FACTOR(fac_2m, "fac-2m", "ext-26m",
+ 13, 1, 0);
+static CLK_FIXED_FACTOR(fac_1m, "fac-1m", "ext-26m",
+ 26, 1, 0);
+static CLK_FIXED_FACTOR(fac_250k, "fac-250k", "ext-26m",
+ 104, 1, 0);
+static CLK_FIXED_FACTOR(fac_rpll0_26m, "rpll0-26m", "ext-26m",
+ 1, 1, 0);
+static CLK_FIXED_FACTOR(fac_rpll1_26m, "rpll1-26m", "ext-26m",
+ 1, 1, 0);
+static CLK_FIXED_FACTOR(fac_rco_25m, "rco-25m", "ext-rc0-100m",
+ 4, 1, 0);
+static CLK_FIXED_FACTOR(fac_rco_4m, "rco-4m", "ext-rc0-100m",
+ 25, 1, 0);
+static CLK_FIXED_FACTOR(fac_rco_2m, "rco-2m", "ext-rc0-100m",
+ 50, 1, 0);
+static CLK_FIXED_FACTOR(fac_3k2, "fac-3k2", "ext-32k",
+ 10, 1, 0);
+static CLK_FIXED_FACTOR(fac_1k, "fac-1k", "ext-32k",
+ 32, 1, 0);
+
+static SPRD_SC_GATE_CLK(mpll0_gate, "mpll0-gate", "ext-26m", 0xb0,
+ 0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(mpll1_gate, "mpll1-gate", "ext-26m", 0xb0,
+ 0x1000, BIT(18), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dpll0_gate, "dpll0-gate", "ext-26m", 0xb4,
+ 0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dpll1_gate, "dpll1-gate", "ext-26m", 0xb4,
+ 0x1000, BIT(18), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ltepll0_gate, "ltepll0-gate", "ext-26m", 0xb8,
+ 0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(twpll_gate, "twpll-gate", "ext-26m", 0xbc,
+ 0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ltepll1_gate, "ltepll1-gate", "ext-26m", 0x10c,
+ 0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(rpll0_gate, "rpll0-gate", "ext-26m", 0x16c,
+ 0x1000, BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK(rpll1_gate, "rpll1-gate", "ext-26m", 0x16c,
+ 0x1000, BIT(18), 0, 0);
+static SPRD_SC_GATE_CLK(cppll_gate, "cppll-gate", "ext-26m", 0x2b4,
+ 0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(gpll_gate, "gpll-gate", "ext-26m", 0x32c,
+ 0x1000, BIT(0), CLK_IGNORE_UNUSED, CLK_GATE_SET_TO_DISABLE);
+
+static struct sprd_clk_common *sc9860_pmu_gate_clks[] = {
+ /* address base is 0x402b0000 */
+ &mpll0_gate.common,
+ &mpll1_gate.common,
+ &dpll0_gate.common,
+ &dpll1_gate.common,
+ <epll0_gate.common,
+ &twpll_gate.common,
+ <epll1_gate.common,
+ &rpll0_gate.common,
+ &rpll1_gate.common,
+ &cppll_gate.common,
+ &gpll_gate.common,
+};
+
+static struct clk_hw_onecell_data sc9860_pmu_gate_hws = {
+ .hws = {
+ [CLK_EXT_RCO_100M] = &ext_rco_100m.hw,
+ [CLK_EXT_32K] = &ext_32k.hw,
+ [CLK_FAC_4M] = &fac_4m.hw,
+ [CLK_FAC_2M] = &fac_2m.hw,
+ [CLK_FAC_1M] = &fac_1m.hw,
+ [CLK_FAC_250K] = &fac_250k.hw,
+ [CLK_FAC_RPLL0_26M] = &fac_rpll0_26m.hw,
+ [CLK_FAC_RPLL1_26M] = &fac_rpll1_26m.hw,
+ [CLK_FAC_RCO25M] = &fac_rco_25m.hw,
+ [CLK_FAC_RCO4M] = &fac_rco_4m.hw,
+ [CLK_FAC_RCO2M] = &fac_rco_2m.hw,
+ [CLK_FAC_3K2] = &fac_3k2.hw,
+ [CLK_FAC_1K] = &fac_1k.hw,
+ [CLK_MPLL0_GATE] = &mpll0_gate.common.hw,
+ [CLK_MPLL1_GATE] = &mpll1_gate.common.hw,
+ [CLK_DPLL0_GATE] = &dpll0_gate.common.hw,
+ [CLK_DPLL1_GATE] = &dpll1_gate.common.hw,
+ [CLK_LTEPLL0_GATE] = <epll0_gate.common.hw,
+ [CLK_TWPLL_GATE] = &twpll_gate.common.hw,
+ [CLK_LTEPLL1_GATE] = <epll1_gate.common.hw,
+ [CLK_RPLL0_GATE] = &rpll0_gate.common.hw,
+ [CLK_RPLL1_GATE] = &rpll1_gate.common.hw,
+ [CLK_CPPLL_GATE] = &cppll_gate.common.hw,
+ [CLK_GPLL_GATE] = &gpll_gate.common.hw,
+ },
+ .num = CLK_PMU_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_pmu_gate_desc = {
+ .clk_clks = sc9860_pmu_gate_clks,
+ .num_clk_clks = ARRAY_SIZE(sc9860_pmu_gate_clks),
+ .hw_clks = &sc9860_pmu_gate_hws,
+};
+
+/* GPLL/LPLL/DPLL/RPLL/CPLL */
+static const u64 const itable1[4] = {3, 780000000, 988000000, 1196000000};
+
+/* TWPLL/MPLL0/MPLL1 */
+static const u64 itable2[4] = {3, 1638000000, 2080000000, 2600000000UL};
+
+static const struct clk_bit_field const f_mpll0[PLL_FACT_MAX] = {
+ { .shift = 20, .width = 1 }, /* lock_done */
+ { .shift = 19, .width = 1 }, /* div_s */
+ { .shift = 18, .width = 1 }, /* mod_en */
+ { .shift = 17, .width = 1 }, /* sdm_en */
+ { .shift = 0, .width = 0 }, /* refin */
+ { .shift = 11, .width = 2 }, /* ibias */
+ { .shift = 0, .width = 7 }, /* n */
+ { .shift = 57, .width = 7 }, /* nint */
+ { .shift = 32, .width = 23}, /* kint */
+ { .shift = 0, .width = 0 }, /* prediv */
+ { .shift = 56, .width = 1 }, /* postdiv */
+};
+static SPRD_PLL_WITH_ITABLE_K_FVCO(mpll0_clk, "mpll0", "mpll0-gate", 0x24,
+ 2, itable2, f_mpll0, 200,
+ 1000, 1000, 1, 1300000000);
+
+static const struct clk_bit_field const f_mpll1[PLL_FACT_MAX] = {
+ { .shift = 20, .width = 1 }, /* lock_done */
+ { .shift = 19, .width = 1 }, /* div_s */
+ { .shift = 18, .width = 1 }, /* mod_en */
+ { .shift = 17, .width = 1 }, /* sdm_en */
+ { .shift = 0, .width = 0 }, /* refin */
+ { .shift = 11, .width = 2 }, /* ibias */
+ { .shift = 0, .width = 7 }, /* n */
+ { .shift = 57, .width = 7 }, /* nint */
+ { .shift = 32, .width = 23}, /* kint */
+ { .shift = 56, .width = 1 }, /* prediv */
+ { .shift = 0, .width = 0 }, /* postdiv */
+};
+static SPRD_PLL_WITH_ITABLE_1K(mpll1_clk, "mpll1", "mpll1-gate", 0x2c,
+ 2, itable2, f_mpll1, 200);
+
+static const struct clk_bit_field const f_dpll[PLL_FACT_MAX] = {
+ { .shift = 16, .width = 1 }, /* lock_done */
+ { .shift = 15, .width = 1 }, /* div_s */
+ { .shift = 14, .width = 1 }, /* mod_en */
+ { .shift = 13, .width = 1 }, /* sdm_en */
+ { .shift = 0, .width = 0 }, /* refin */
+ { .shift = 8, .width = 2 }, /* ibias */
+ { .shift = 0, .width = 7 }, /* n */
+ { .shift = 57, .width = 7 }, /* nint */
+ { .shift = 32, .width = 23}, /* kint */
+ { .shift = 0, .width = 0 }, /* prediv */
+ { .shift = 0, .width = 0 }, /* postdiv */
+};
+static SPRD_PLL_WITH_ITABLE_1K(dpll0_clk, "dpll0", "dpll0-gate", 0x34,
+ 2, itable1, f_dpll, 200);
+
+static SPRD_PLL_WITH_ITABLE_1K(dpll1_clk, "dpll1", "dpll1-gate", 0x3c,
+ 2, itable1, f_dpll, 200);
+
+static const struct clk_bit_field const f_rpll[PLL_FACT_MAX] = {
+ { .shift = 0, .width = 1 }, /* lock_done */
+ { .shift = 3, .width = 1 }, /* div_s */
+ { .shift = 80, .width = 1 }, /* mod_en */
+ { .shift = 81, .width = 1 }, /* sdm_en */
+ { .shift = 0, .width = 0 }, /* refin */
+ { .shift = 14, .width = 2 }, /* ibias */
+ { .shift = 16, .width = 7 }, /* n */
+ { .shift = 4, .width = 7 }, /* nint */
+ { .shift = 32, .width = 23}, /* kint */
+ { .shift = 0, .width = 0 }, /* prediv */
+ { .shift = 0, .width = 0 }, /* postdiv */
+};
+static SPRD_PLL_WITH_ITABLE_1K(rpll0_clk, "rpll0", "rpll0-gate", 0x44,
+ 3, itable1, f_rpll, 200);
+
+static SPRD_PLL_WITH_ITABLE_1K(rpll1_clk, "rpll1", "rpll1-gate", 0x50,
+ 3, itable1, f_rpll, 200);
+
+static const struct clk_bit_field const f_twpll[PLL_FACT_MAX] = {
+ { .shift = 21, .width = 1 }, /* lock_done */
+ { .shift = 20, .width = 1 }, /* div_s */
+ { .shift = 19, .width = 1 }, /* mod_en */
+ { .shift = 18, .width = 1 }, /* sdm_en */
+ { .shift = 0, .width = 0 }, /* refin */
+ { .shift = 13, .width = 2 }, /* ibias */
+ { .shift = 0, .width = 7 }, /* n */
+ { .shift = 57, .width = 7 }, /* nint */
+ { .shift = 32, .width = 23}, /* kint */
+ { .shift = 0, .width = 0 }, /* prediv */
+ { .shift = 0, .width = 0 }, /* postdiv */
+};
+static SPRD_PLL_WITH_ITABLE_1K(twpll_clk, "twpll", "twpll-gate", 0x5c,
+ 2, itable2, f_twpll, 200);
+
+static const struct clk_bit_field const f_ltepll[PLL_FACT_MAX] = {
+ { .shift = 31, .width = 1 }, /* lock_done */
+ { .shift = 27, .width = 1 }, /* div_s */
+ { .shift = 26, .width = 1 }, /* mod_en */
+ { .shift = 25, .width = 1 }, /* sdm_en */
+ { .shift = 0, .width = 0 }, /* refin */
+ { .shift = 20, .width = 2 }, /* ibias */
+ { .shift = 0, .width = 7 }, /* n */
+ { .shift = 57, .width = 7 }, /* nint */
+ { .shift = 32, .width = 23}, /* kint */
+ { .shift = 0, .width = 0 }, /* prediv */
+ { .shift = 0, .width = 0 }, /* postdiv */
+};
+static SPRD_PLL_WITH_ITABLE_1K(ltepll0_clk, "ltepll0", "ltepll0-gate",
+ 0x64, 2, itable1,
+ f_ltepll, 200);
+static SPRD_PLL_WITH_ITABLE_1K(ltepll1_clk, "ltepll1", "ltepll1-gate",
+ 0x6c, 2, itable1,
+ f_ltepll, 200);
+
+static const struct clk_bit_field const f_gpll[PLL_FACT_MAX] = {
+ { .shift = 18, .width = 1 }, /* lock_done */
+ { .shift = 15, .width = 1 }, /* div_s */
+ { .shift = 14, .width = 1 }, /* mod_en */
+ { .shift = 13, .width = 1 }, /* sdm_en */
+ { .shift = 0, .width = 0 }, /* refin */
+ { .shift = 8, .width = 2 }, /* ibias */
+ { .shift = 0, .width = 7 }, /* n */
+ { .shift = 57, .width = 7 }, /* nint */
+ { .shift = 32, .width = 23}, /* kint */
+ { .shift = 0, .width = 0 }, /* prediv */
+ { .shift = 17, .width = 1 }, /* postdiv */
+};
+static SPRD_PLL_WITH_ITABLE_K_FVCO(gpll_clk, "gpll", "gpll-gate", 0x9c,
+ 2, itable1, f_gpll, 200,
+ 1000, 1000, 1, 600000000);
+
+static const struct clk_bit_field const f_cppll[PLL_FACT_MAX] = {
+ { .shift = 17, .width = 1 }, /* lock_done */
+ { .shift = 15, .width = 1 }, /* div_s */
+ { .shift = 14, .width = 1 }, /* mod_en */
+ { .shift = 13, .width = 1 }, /* sdm_en */
+ { .shift = 0, .width = 0 }, /* refin */
+ { .shift = 8, .width = 2 }, /* ibias */
+ { .shift = 0, .width = 7 }, /* n */
+ { .shift = 57, .width = 7 }, /* nint */
+ { .shift = 32, .width = 23}, /* kint */
+ { .shift = 0, .width = 0 }, /* prediv */
+ { .shift = 0, .width = 0 }, /* postdiv */
+};
+static SPRD_PLL_WITH_ITABLE_1K(cppll_clk, "cppll", "cppll-gate", 0xc4,
+ 2, itable1, f_cppll, 200);
+
+static CLK_FIXED_FACTOR(gpll_42m5, "gpll-42m5", "gpll", 20, 1, 0);
+static CLK_FIXED_FACTOR(twpll_768m, "twpll-768m", "twpll", 2, 1, 0);
+static CLK_FIXED_FACTOR(twpll_384m, "twpll-384m", "twpll", 4, 1, 0);
+static CLK_FIXED_FACTOR(twpll_192m, "twpll-192m", "twpll", 8, 1, 0);
+static CLK_FIXED_FACTOR(twpll_96m, "twpll-96m", "twpll", 16, 1, 0);
+static CLK_FIXED_FACTOR(twpll_48m, "twpll-48m", "twpll", 32, 1, 0);
+static CLK_FIXED_FACTOR(twpll_24m, "twpll-24m", "twpll", 64, 1, 0);
+static CLK_FIXED_FACTOR(twpll_12m, "twpll-12m", "twpll", 128, 1, 0);
+static CLK_FIXED_FACTOR(twpll_512m, "twpll-512m", "twpll", 3, 1, 0);
+static CLK_FIXED_FACTOR(twpll_256m, "twpll-256m", "twpll", 6, 1, 0);
+static CLK_FIXED_FACTOR(twpll_128m, "twpll-128m", "twpll", 12, 1, 0);
+static CLK_FIXED_FACTOR(twpll_64m, "twpll-64m", "twpll", 24, 1, 0);
+static CLK_FIXED_FACTOR(twpll_307m2, "twpll-307m2", "twpll", 5, 1, 0);
+static CLK_FIXED_FACTOR(twpll_153m6, "twpll-153m6", "twpll", 10, 1, 0);
+static CLK_FIXED_FACTOR(twpll_76m8, "twpll-76m8", "twpll", 20, 1, 0);
+static CLK_FIXED_FACTOR(twpll_51m2, "twpll-51m2", "twpll", 30, 1, 0);
+static CLK_FIXED_FACTOR(twpll_38m4, "twpll-38m4", "twpll", 40, 1, 0);
+static CLK_FIXED_FACTOR(twpll_19m2, "twpll-19m2", "twpll", 80, 1, 0);
+static CLK_FIXED_FACTOR(l0_614m4, "l0-614m4", "ltepll0", 2, 1, 0);
+static CLK_FIXED_FACTOR(l0_409m6, "l0-409m6", "ltepll0", 3, 1, 0);
+static CLK_FIXED_FACTOR(l0_38m, "l0-38m", "ltepll0", 32, 1, 0);
+static CLK_FIXED_FACTOR(l1_38m, "l1-38m", "ltepll1", 32, 1, 0);
+static CLK_FIXED_FACTOR(rpll0_192m, "rpll0-192m", "rpll0", 6, 1, 0);
+static CLK_FIXED_FACTOR(rpll0_96m, "rpll0-96m", "rpll0", 12, 1, 0);
+static CLK_FIXED_FACTOR(rpll0_48m, "rpll0-48m", "rpll0", 24, 1, 0);
+static CLK_FIXED_FACTOR(rpll1_468m, "rpll1-468m", "rpll1", 2, 1, 0);
+static CLK_FIXED_FACTOR(rpll1_192m, "rpll1-192m", "rpll1", 6, 1, 0);
+static CLK_FIXED_FACTOR(rpll1_96m, "rpll1-96m", "rpll1", 12, 1, 0);
+static CLK_FIXED_FACTOR(rpll1_64m, "rpll1-64m", "rpll1", 18, 1, 0);
+static CLK_FIXED_FACTOR(rpll1_48m, "rpll1-48m", "rpll1", 24, 1, 0);
+static CLK_FIXED_FACTOR(dpll0_50m, "dpll0-50m", "dpll0", 16, 1, 0);
+static CLK_FIXED_FACTOR(dpll1_50m, "dpll1-50m", "dpll1", 16, 1, 0);
+static CLK_FIXED_FACTOR(cppll_50m, "cppll-50m", "cppll", 18, 1, 0);
+static CLK_FIXED_FACTOR(m0_39m, "m0-39m", "mpll0", 32, 1, 0);
+static CLK_FIXED_FACTOR(m1_63m, "m1-63m", "mpll1", 32, 1, 0);
+
+static struct sprd_clk_common *sc9860_pll_clks[] = {
+ /* address base is 0x40400000 */
+ &mpll0_clk.common,
+ &mpll1_clk.common,
+ &dpll0_clk.common,
+ &dpll1_clk.common,
+ &rpll0_clk.common,
+ &rpll1_clk.common,
+ &twpll_clk.common,
+ <epll0_clk.common,
+ <epll1_clk.common,
+ &gpll_clk.common,
+ &cppll_clk.common,
+};
+
+static struct clk_hw_onecell_data sc9860_pll_hws = {
+ .hws = {
+ [CLK_MPLL0] = &mpll0_clk.common.hw,
+ [CLK_MPLL1] = &mpll1_clk.common.hw,
+ [CLK_DPLL0] = &dpll0_clk.common.hw,
+ [CLK_DPLL1] = &dpll1_clk.common.hw,
+ [CLK_RPLL0] = &rpll0_clk.common.hw,
+ [CLK_RPLL1] = &rpll1_clk.common.hw,
+ [CLK_TWPLL] = &twpll_clk.common.hw,
+ [CLK_LTEPLL0] = <epll0_clk.common.hw,
+ [CLK_LTEPLL1] = <epll1_clk.common.hw,
+ [CLK_GPLL] = &gpll_clk.common.hw,
+ [CLK_CPPLL] = &cppll_clk.common.hw,
+ [CLK_GPLL_42M5] = &gpll_42m5.hw,
+ [CLK_TWPLL_768M] = &twpll_768m.hw,
+ [CLK_TWPLL_384M] = &twpll_384m.hw,
+ [CLK_TWPLL_192M] = &twpll_192m.hw,
+ [CLK_TWPLL_96M] = &twpll_96m.hw,
+ [CLK_TWPLL_48M] = &twpll_48m.hw,
+ [CLK_TWPLL_24M] = &twpll_24m.hw,
+ [CLK_TWPLL_12M] = &twpll_12m.hw,
+ [CLK_TWPLL_512M] = &twpll_512m.hw,
+ [CLK_TWPLL_256M] = &twpll_256m.hw,
+ [CLK_TWPLL_128M] = &twpll_128m.hw,
+ [CLK_TWPLL_64M] = &twpll_64m.hw,
+ [CLK_TWPLL_307M2] = &twpll_307m2.hw,
+ [CLK_TWPLL_153M6] = &twpll_153m6.hw,
+ [CLK_TWPLL_76M8] = &twpll_76m8.hw,
+ [CLK_TWPLL_51M2] = &twpll_51m2.hw,
+ [CLK_TWPLL_38M4] = &twpll_38m4.hw,
+ [CLK_TWPLL_19M2] = &twpll_19m2.hw,
+ [CLK_L0_614M4] = &l0_614m4.hw,
+ [CLK_L0_409M6] = &l0_409m6.hw,
+ [CLK_L0_38M] = &l0_38m.hw,
+ [CLK_L1_38M] = &l1_38m.hw,
+ [CLK_RPLL0_192M] = &rpll0_192m.hw,
+ [CLK_RPLL0_96M] = &rpll0_96m.hw,
+ [CLK_RPLL0_48M] = &rpll0_48m.hw,
+ [CLK_RPLL1_468M] = &rpll1_468m.hw,
+ [CLK_RPLL1_192M] = &rpll1_192m.hw,
+ [CLK_RPLL1_96M] = &rpll1_96m.hw,
+ [CLK_RPLL1_64M] = &rpll1_64m.hw,
+ [CLK_RPLL1_48M] = &rpll1_48m.hw,
+ [CLK_DPLL0_50M] = &dpll0_50m.hw,
+ [CLK_DPLL1_50M] = &dpll1_50m.hw,
+ [CLK_CPPLL_50M] = &cppll_50m.hw,
+ [CLK_M0_39M] = &m0_39m.hw,
+ [CLK_M1_63M] = &m1_63m.hw,
+ },
+ .num = CLK_PLL_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_pll_desc = {
+ .clk_clks = sc9860_pll_clks,
+ .num_clk_clks = ARRAY_SIZE(sc9860_pll_clks),
+ .hw_clks = &sc9860_pll_hws,
+};
+
+#define SC9860_MUX_FLAG \
+ (CLK_GET_RATE_NOCACHE | CLK_SET_RATE_NO_REPARENT)
+
+static const char * const ap_apb_parents[] = { "ext-26m", "twpll-64m",
+ "twpll-96m", "twpll-128m" };
+static SPRD_MUX_CLK(ap_apb, "ap-apb", ap_apb_parents,
+ 0x20, 0, 1, SC9860_MUX_FLAG);
+
+static const char * const ap_apb_usb3[] = { "ext-32k", "twpll-24m" };
+static SPRD_MUX_CLK(ap_usb3, "ap-usb3", ap_apb_usb3,
+ 0x2c, 0, 1, SC9860_MUX_FLAG);
+
+static const char * const uart_parents[] = { "ext-26m", "twpll-48m",
+ "twpll-51m2", "twpll-96m" };
+static SPRD_COMP_CLK(uart0_clk, "uart0", uart_parents, 0x30,
+ 0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(uart1_clk, "uart1", uart_parents, 0x34,
+ 0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(uart2_clk, "uart2", uart_parents, 0x38,
+ 0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(uart3_clk, "uart3", uart_parents, 0x3c,
+ 0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(uart4_clk, "uart4", uart_parents, 0x40,
+ 0, 2, 8, 3, 0);
+
+static const char * const i2c_parents[] = { "ext-26m", "twpll-48m",
+ "twpll-51m2", "twpll-153m6" };
+static SPRD_COMP_CLK(i2c0_clk, "i2c0", i2c_parents, 0x44,
+ 0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(i2c1_clk, "i2c1", i2c_parents, 0x48,
+ 0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(i2c2_clk, "i2c2", i2c_parents, 0x4c,
+ 0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(i2c3_clk, "i2c3", i2c_parents, 0x50,
+ 0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(i2c4_clk, "i2c4", i2c_parents, 0x54,
+ 0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(i2c5_clk, "i2c5", i2c_parents, 0x58,
+ 0, 2, 8, 3, 0);
+
+static const char * const spi_parents[] = { "ext-26m", "twpll-128m",
+ "twpll-153m6", "twpll-192m" };
+static SPRD_COMP_CLK(spi0_clk, "spi0", spi_parents, 0x5c,
+ 0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(spi1_clk, "spi1", spi_parents, 0x60,
+ 0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(spi2_clk, "spi2", spi_parents, 0x64,
+ 0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(spi3_clk, "spi3", spi_parents, 0x68,
+ 0, 2, 8, 3, 0);
+
+static const char * const iis_parents[] = { "ext-26m",
+ "twpll-128m",
+ "twpll-153m6" };
+static SPRD_COMP_CLK(iis0_clk, "iis0", iis_parents, 0x6c,
+ 0, 2, 8, 6, 0);
+static SPRD_COMP_CLK(iis1_clk, "iis1", iis_parents, 0x70,
+ 0, 2, 8, 6, 0);
+static SPRD_COMP_CLK(iis2_clk, "iis2", iis_parents, 0x74,
+ 0, 2, 8, 6, 0);
+static SPRD_COMP_CLK(iis3_clk, "iis3", iis_parents, 0x78,
+ 0, 2, 8, 6, 0);
+
+static struct sprd_clk_common *sc9860_ap_clks[] = {
+ /* address base is 0x20000000 */
+ &ap_apb.common,
+ &ap_usb3.common,
+ &uart0_clk.common,
+ &uart1_clk.common,
+ &uart2_clk.common,
+ &uart3_clk.common,
+ &uart4_clk.common,
+ &i2c0_clk.common,
+ &i2c1_clk.common,
+ &i2c2_clk.common,
+ &i2c3_clk.common,
+ &i2c4_clk.common,
+ &i2c5_clk.common,
+ &spi0_clk.common,
+ &spi1_clk.common,
+ &spi2_clk.common,
+ &spi3_clk.common,
+ &iis0_clk.common,
+ &iis1_clk.common,
+ &iis2_clk.common,
+ &iis3_clk.common,
+};
+
+static struct clk_hw_onecell_data sc9860_ap_clk_hws = {
+ .hws = {
+ [CLK_AP_APB] = &ap_apb.common.hw,
+ [CLK_AP_USB3] = &ap_usb3.common.hw,
+ [CLK_UART0] = &uart0_clk.common.hw,
+ [CLK_UART1] = &uart1_clk.common.hw,
+ [CLK_UART2] = &uart2_clk.common.hw,
+ [CLK_UART3] = &uart3_clk.common.hw,
+ [CLK_UART4] = &uart4_clk.common.hw,
+ [CLK_I2C0] = &i2c0_clk.common.hw,
+ [CLK_I2C1] = &i2c1_clk.common.hw,
+ [CLK_I2C2] = &i2c2_clk.common.hw,
+ [CLK_I2C3] = &i2c3_clk.common.hw,
+ [CLK_I2C4] = &i2c4_clk.common.hw,
+ [CLK_I2C5] = &i2c5_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_SPI2] = &spi2_clk.common.hw,
+ [CLK_SPI3] = &spi3_clk.common.hw,
+ [CLK_IIS0] = &iis0_clk.common.hw,
+ [CLK_IIS1] = &iis1_clk.common.hw,
+ [CLK_IIS2] = &iis2_clk.common.hw,
+ [CLK_IIS3] = &iis3_clk.common.hw,
+ },
+ .num = CLK_AP_CLK_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_ap_clk_desc = {
+ .clk_clks = sc9860_ap_clks,
+ .num_clk_clks = ARRAY_SIZE(sc9860_ap_clks),
+ .hw_clks = &sc9860_ap_clk_hws,
+};
+
+static const char * const aon_apb_parents[] = { "rco-25m", "ext-26m",
+ "ext-rco-100m", "twpll-96m",
+ "twpll-128m",
+ "twpll-153m6" };
+static SPRD_COMP_CLK(aon_apb, "aon-apb", aon_apb_parents, 0x230,
+ 0, 3, 8, 2, 0);
+
+static const char * const aux_parents[] = { "ext-32k", "rpll0-26m",
+ "rpll1-26m", "ext-26m",
+ "cppll-50m", "rco-25m",
+ "dpll0-50m", "dpll1-50m",
+ "gpll-42m5", "twpll-48m",
+ "m0-39m", "m1-63m",
+ "l0-38m", "l1-38m" };
+
+static SPRD_COMP_CLK(aux0_clk, "aux0", aux_parents, 0x238,
+ 0, 5, 8, 4, 0);
+static SPRD_COMP_CLK(aux1_clk, "aux1", aux_parents, 0x23c,
+ 0, 5, 8, 4, 0);
+static SPRD_COMP_CLK(aux2_clk, "aux2", aux_parents, 0x240,
+ 0, 5, 8, 4, 0);
+static SPRD_COMP_CLK(probe_clk, "probe", aux_parents, 0x244,
+ 0, 5, 8, 4, 0);
+
+static const char * const sp_ahb_parents[] = { "rco-4m", "ext-26m",
+ "ext-rco-100m", "twpll-96m",
+ "twpll-128m",
+ "twpll-153m6" };
+static SPRD_COMP_CLK(sp_ahb, "sp-ahb", sp_ahb_parents, 0x2d0,
+ 0, 3, 8, 2, 0);
+
+static const char * const cci_parents[] = { "ext-26m", "twpll-384m",
+ "l0-614m4", "twpll-768m" };
+static SPRD_COMP_CLK(cci_clk, "cci", cci_parents, 0x300,
+ 0, 2, 8, 2, 0);
+static SPRD_COMP_CLK(gic_clk, "gic", cci_parents, 0x304,
+ 0, 2, 8, 2, 0);
+static SPRD_COMP_CLK(cssys_clk, "cssys", cci_parents, 0x310,
+ 0, 2, 8, 2, 0);
+
+static const char * const sdio_2x_parents[] = { "fac-1m", "ext-26m",
+ "twpll-307m2", "twpll-384m",
+ "l0-409m6" };
+static SPRD_COMP_CLK(sdio0_2x, "sdio0-2x", sdio_2x_parents, 0x328,
+ 0, 3, 8, 4, 0);
+static SPRD_COMP_CLK(sdio1_2x, "sdio1-2x", sdio_2x_parents, 0x330,
+ 0, 3, 8, 4, 0);
+static SPRD_COMP_CLK(sdio2_2x, "sdio2-2x", sdio_2x_parents, 0x338,
+ 0, 3, 8, 4, 0);
+static SPRD_COMP_CLK(emmc_2x, "emmc-2x", sdio_2x_parents, 0x340,
+ 0, 3, 8, 4, 0);
+
+static SPRD_DIV_CLK(sdio0_1x, "sdio0-1x", "sdio0-2x", 0x32c,
+ 8, 1, 0);
+static SPRD_DIV_CLK(sdio1_1x, "sdio1-1x", "sdio1-2x", 0x334,
+ 8, 1, 0);
+static SPRD_DIV_CLK(sdio2_1x, "sdio2-1x", "sdio2-2x", 0x33c,
+ 8, 1, 0);
+static SPRD_DIV_CLK(emmc_1x, "emmc-1x", "emmc-2x", 0x344,
+ 8, 1, 0);
+
+static const char * const adi_parents[] = { "rco-4m", "ext-26m",
+ "rco-25m", "twpll-38m4",
+ "twpll-51m2" };
+static SPRD_MUX_CLK(adi_clk, "adi", adi_parents, 0x234,
+ 0, 3, SC9860_MUX_FLAG);
+
+static const char * const pwm_parents[] = { "ext-32k", "ext-26m",
+ "rco-4m", "rco-25m",
+ "twpll-48m" };
+static SPRD_MUX_CLK(pwm0_clk, "pwm0", pwm_parents, 0x248,
+ 0, 3, SC9860_MUX_FLAG);
+static SPRD_MUX_CLK(pwm1_clk, "pwm1", pwm_parents, 0x24c,
+ 0, 3, SC9860_MUX_FLAG);
+static SPRD_MUX_CLK(pwm2_clk, "pwm2", pwm_parents, 0x250,
+ 0, 3, SC9860_MUX_FLAG);
+static SPRD_MUX_CLK(pwm3_clk, "pwm3", pwm_parents, 0x254,
+ 0, 3, SC9860_MUX_FLAG);
+
+static const char * const efuse_parents[] = { "rco-25m", "ext-26m" };
+static SPRD_MUX_CLK(efuse_clk, "efuse", efuse_parents, 0x258,
+ 0, 1, SC9860_MUX_FLAG);
+
+static const char * const cm3_uart_parents[] = { "rco-4m", "ext-26m",
+ "rco-100m", "twpll-48m",
+ "twpll-51m2", "twpll-96m",
+ "twpll-128m" };
+static SPRD_MUX_CLK(cm3_uart0, "cm3-uart0", cm3_uart_parents, 0x25c,
+ 0, 3, SC9860_MUX_FLAG);
+static SPRD_MUX_CLK(cm3_uart1, "cm3-uart1", cm3_uart_parents, 0x260,
+ 0, 3, SC9860_MUX_FLAG);
+
+static const char * const thm_parents[] = { "ext-32k", "fac-250k" };
+static SPRD_MUX_CLK(thm_clk, "thm", thm_parents, 0x270,
+ 0, 1, SC9860_MUX_FLAG);
+
+static const char * const cm3_i2c_parents[] = { "rco-4m",
+ "ext-26m",
+ "rco-100m",
+ "twpll-48m",
+ "twpll-51m2",
+ "twpll-153m6" };
+static SPRD_MUX_CLK(cm3_i2c0, "cm3-i2c0", cm3_i2c_parents, 0x274,
+ 0, 3, SC9860_MUX_FLAG);
+static SPRD_MUX_CLK(cm3_i2c1, "cm3-i2c1", cm3_i2c_parents, 0x278,
+ 0, 3, SC9860_MUX_FLAG);
+static SPRD_MUX_CLK(aon_i2c, "aon-i2c", cm3_i2c_parents, 0x280,
+ 0, 3, SC9860_MUX_FLAG);
+
+static const char * const cm4_spi_parents[] = { "ext-26m", "twpll-96m",
+ "rco-100m", "twpll-128m",
+ "twpll-153m6", "twpll-192m" };
+static SPRD_MUX_CLK(cm4_spi, "cm4-spi", cm4_spi_parents, 0x27c,
+ 0, 3, SC9860_MUX_FLAG);
+
+static SPRD_MUX_CLK(avs_clk, "avs", uart_parents, 0x284,
+ 0, 2, SC9860_MUX_FLAG);
+
+static const char * const ca53_dap_parents[] = { "ext-26m", "rco-4m",
+ "rco-100m", "twpll-76m8",
+ "twpll-128m", "twpll-153m6" };
+static SPRD_MUX_CLK(ca53_dap, "ca53-dap", ca53_dap_parents, 0x288,
+ 0, 3, SC9860_MUX_FLAG);
+
+static const char * const ca53_ts_parents[] = { "ext-32k", "ext-26m",
+ "clk-twpll-128m",
+ "clk-twpll-153m6" };
+static SPRD_MUX_CLK(ca53_ts, "ca53-ts", ca53_ts_parents, 0x290,
+ 0, 2, SC9860_MUX_FLAG);
+
+static const char * const djtag_tck_parents[] = { "rco-4m", "ext-26m" };
+static SPRD_MUX_CLK(djtag_tck, "djtag-tck", djtag_tck_parents, 0x2c8,
+ 0, 1, SC9860_MUX_FLAG);
+
+static const char * const pmu_parents[] = { "ext-32k", "rco-4m", "clk-4m" };
+static SPRD_MUX_CLK(pmu_clk, "pmu", pmu_parents, 0x2e0,
+ 0, 2, SC9860_MUX_FLAG);
+
+static const char * const pmu_26m_parents[] = { "rco-25m", "ext-26m" };
+static SPRD_MUX_CLK(pmu_26m, "pmu-26m", pmu_26m_parents, 0x2e4,
+ 0, 1, SC9860_MUX_FLAG);
+
+static const char * const debounce_parents[] = { "ext-32k", "rco-4m",
+ "rco-25m", "ext-26m" };
+static SPRD_MUX_CLK(debounce_clk, "debounce", debounce_parents, 0x2e8,
+ 0, 2, SC9860_MUX_FLAG);
+
+static const char * const otg2_ref_parents[] = { "twpll-12m", "twpll-24m" };
+static SPRD_MUX_CLK(otg2_ref, "otg2-ref", otg2_ref_parents, 0x2f4,
+ 0, 1, SC9860_MUX_FLAG);
+
+static const char * const usb3_ref_parents[] = { "twpll-24m", "twpll-19m2",
+ "twpll-48m" };
+static SPRD_MUX_CLK(usb3_ref, "usb3-ref", usb3_ref_parents, 0x2f8,
+ 0, 2, SC9860_MUX_FLAG);
+
+static const char * const ap_axi_parents[] = { "ext-26m", "twpll-76m8",
+ "twpll-128m", "twpll-256m" };
+static SPRD_MUX_CLK(ap_axi, "ap-axi", ap_axi_parents, 0x324,
+ 0, 2, SC9860_MUX_FLAG);
+
+static struct sprd_clk_common *sc9860_aon_prediv[] = {
+ /* address base is 0x402d0000 */
+ &aon_apb.common,
+ &aux0_clk.common,
+ &aux1_clk.common,
+ &aux2_clk.common,
+ &probe_clk.common,
+ &sp_ahb.common,
+ &cci_clk.common,
+ &gic_clk.common,
+ &cssys_clk.common,
+ &sdio0_2x.common,
+ &sdio1_2x.common,
+ &sdio2_2x.common,
+ &emmc_2x.common,
+ &sdio0_1x.common,
+ &sdio1_1x.common,
+ &sdio2_1x.common,
+ &emmc_1x.common,
+ &adi_clk.common,
+ &pwm0_clk.common,
+ &pwm1_clk.common,
+ &pwm2_clk.common,
+ &pwm3_clk.common,
+ &efuse_clk.common,
+ &cm3_uart0.common,
+ &cm3_uart1.common,
+ &thm_clk.common,
+ &cm3_i2c0.common,
+ &cm3_i2c1.common,
+ &cm4_spi.common,
+ &aon_i2c.common,
+ &avs_clk.common,
+ &ca53_dap.common,
+ &ca53_ts.common,
+ &djtag_tck.common,
+ &pmu_clk.common,
+ &pmu_26m.common,
+ &debounce_clk.common,
+ &otg2_ref.common,
+ &usb3_ref.common,
+ &ap_axi.common,
+};
+
+static struct clk_hw_onecell_data sc9860_aon_prediv_hws = {
+ .hws = {
+ [CLK_AON_APB] = &aon_apb.common.hw,
+ [CLK_AUX0] = &aux0_clk.common.hw,
+ [CLK_AUX1] = &aux1_clk.common.hw,
+ [CLK_AUX2] = &aux2_clk.common.hw,
+ [CLK_PROBE] = &probe_clk.common.hw,
+ [CLK_SP_AHB] = &sp_ahb.common.hw,
+ [CLK_CCI] = &cci_clk.common.hw,
+ [CLK_GIC] = &gic_clk.common.hw,
+ [CLK_CSSYS] = &cssys_clk.common.hw,
+ [CLK_SDIO0_2X] = &sdio0_2x.common.hw,
+ [CLK_SDIO1_2X] = &sdio1_2x.common.hw,
+ [CLK_SDIO2_2X] = &sdio2_2x.common.hw,
+ [CLK_EMMC_2X] = &emmc_2x.common.hw,
+ [CLK_SDIO0_1X] = &sdio0_1x.common.hw,
+ [CLK_SDIO1_1X] = &sdio1_1x.common.hw,
+ [CLK_SDIO2_1X] = &sdio2_1x.common.hw,
+ [CLK_EMMC_1X] = &emmc_1x.common.hw,
+ [CLK_ADI] = &adi_clk.common.hw,
+ [CLK_PWM0] = &pwm0_clk.common.hw,
+ [CLK_PWM1] = &pwm1_clk.common.hw,
+ [CLK_PWM2] = &pwm2_clk.common.hw,
+ [CLK_PWM3] = &pwm3_clk.common.hw,
+ [CLK_EFUSE] = &efuse_clk.common.hw,
+ [CLK_CM3_UART0] = &cm3_uart0.common.hw,
+ [CLK_CM3_UART1] = &cm3_uart1.common.hw,
+ [CLK_THM] = &thm_clk.common.hw,
+ [CLK_CM3_I2C0] = &cm3_i2c0.common.hw,
+ [CLK_CM3_I2C1] = &cm3_i2c1.common.hw,
+ [CLK_CM4_SPI] = &cm4_spi.common.hw,
+ [CLK_AON_I2C] = &aon_i2c.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_CA53_DAP] = &ca53_dap.common.hw,
+ [CLK_CA53_TS] = &ca53_ts.common.hw,
+ [CLK_DJTAG_TCK] = &djtag_tck.common.hw,
+ [CLK_PMU] = &pmu_clk.common.hw,
+ [CLK_PMU_26M] = &pmu_26m.common.hw,
+ [CLK_DEBOUNCE] = &debounce_clk.common.hw,
+ [CLK_OTG2_REF] = &otg2_ref.common.hw,
+ [CLK_USB3_REF] = &usb3_ref.common.hw,
+ [CLK_AP_AXI] = &ap_axi.common.hw,
+ },
+ .num = CLK_AON_PREDIV_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_aon_prediv_desc = {
+ .clk_clks = sc9860_aon_prediv,
+ .num_clk_clks = ARRAY_SIZE(sc9860_aon_prediv),
+ .hw_clks = &sc9860_aon_prediv_hws,
+};
+
+static SPRD_SC_GATE_CLK(usb3_eb, "usb3-eb", "ap-axi", 0x0,
+ 0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(usb3_suspend, "usb3-suspend", "ap-axi", 0x0,
+ 0x1000, BIT(3), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(usb3_ref_eb, "usb3-ref-eb", "ap-axi", 0x0,
+ 0x1000, BIT(4), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dma_eb, "dma-eb", "ap-axi", 0x0,
+ 0x1000, BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(sdio0_eb, "sdio0-eb", "ap-axi", 0x0,
+ 0x1000, BIT(7), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(sdio1_eb, "sdio1-eb", "ap-axi", 0x0,
+ 0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(sdio2_eb, "sdio2-eb", "ap-axi", 0x0,
+ 0x1000, BIT(9), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(emmc_eb, "emmc-eb", "ap-axi", 0x0,
+ 0x1000, BIT(10), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(rom_eb, "rom-eb", "ap-axi", 0x0,
+ 0x1000, BIT(12), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(busmon_eb, "busmon-eb", "ap-axi", 0x0,
+ 0x1000, BIT(13), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(cc63s_eb, "cc63s-eb", "ap-axi", 0x0,
+ 0x1000, BIT(22), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(cc63p_eb, "cc63p-eb", "ap-axi", 0x0,
+ 0x1000, BIT(23), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ce0_eb, "ce0-eb", "ap-axi", 0x0,
+ 0x1000, BIT(24), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ce1_eb, "ce1-eb", "ap-axi", 0x0,
+ 0x1000, BIT(25), CLK_IGNORE_UNUSED, 0);
+
+static struct sprd_clk_common *sc9860_apahb_gate[] = {
+ /* address base is 0x20210000 */
+ &usb3_eb.common,
+ &usb3_suspend.common,
+ &usb3_ref_eb.common,
+ &dma_eb.common,
+ &sdio0_eb.common,
+ &sdio1_eb.common,
+ &sdio2_eb.common,
+ &emmc_eb.common,
+ &rom_eb.common,
+ &busmon_eb.common,
+ &cc63s_eb.common,
+ &cc63p_eb.common,
+ &ce0_eb.common,
+ &ce1_eb.common,
+};
+
+static struct clk_hw_onecell_data sc9860_apahb_gate_hws = {
+ .hws = {
+ [CLK_USB3_EB] = &usb3_eb.common.hw,
+ [CLK_USB3_SUSPEND_EB] = &usb3_suspend.common.hw,
+ [CLK_USB3_REF_EB] = &usb3_ref_eb.common.hw,
+ [CLK_DMA_EB] = &dma_eb.common.hw,
+ [CLK_SDIO0_EB] = &sdio0_eb.common.hw,
+ [CLK_SDIO1_EB] = &sdio1_eb.common.hw,
+ [CLK_SDIO2_EB] = &sdio2_eb.common.hw,
+ [CLK_EMMC_EB] = &emmc_eb.common.hw,
+ [CLK_ROM_EB] = &rom_eb.common.hw,
+ [CLK_BUSMON_EB] = &busmon_eb.common.hw,
+ [CLK_CC63S_EB] = &cc63s_eb.common.hw,
+ [CLK_CC63P_EB] = &cc63p_eb.common.hw,
+ [CLK_CE0_EB] = &ce0_eb.common.hw,
+ [CLK_CE1_EB] = &ce1_eb.common.hw,
+ },
+ .num = CLK_APAHB_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_apahb_gate_desc = {
+ .clk_clks = sc9860_apahb_gate,
+ .num_clk_clks = ARRAY_SIZE(sc9860_apahb_gate),
+ .hw_clks = &sc9860_apahb_gate_hws,
+};
+
+static SPRD_SC_GATE_CLK(avs_lit_eb, "avs-lit-eb", "aon-apb", 0x0,
+ 0x1000, BIT(0), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(avs_big_eb, "avs-big-eb", "aon-apb", 0x0,
+ 0x1000, BIT(1), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_intc5_eb, "ap-intc5-eb", "aon-apb", 0x0,
+ 0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(gpio_eb, "gpio-eb", "aon-apb", 0x0,
+ 0x1000, BIT(3), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pwm0_eb, "pwm0-eb", "aon-apb", 0x0,
+ 0x1000, BIT(4), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pwm1_eb, "pwm1-eb", "aon-apb", 0x0,
+ 0x1000, BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pwm2_eb, "pwm2-eb", "aon-apb", 0x0,
+ 0x1000, BIT(6), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pwm3_eb, "pwm3-eb", "aon-apb", 0x0,
+ 0x1000, BIT(7), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(kpd_eb, "kpd-eb", "aon-apb", 0x0,
+ 0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aon_sys_eb, "aon-sys-eb", "aon-apb", 0x0,
+ 0x1000, BIT(9), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_sys_eb, "ap-sys-eb", "aon-apb", 0x0,
+ 0x1000, BIT(10), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aon_tmr_eb, "aon-tmr-eb", "aon-apb", 0x0,
+ 0x1000, BIT(11), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_tmr0_eb, "ap-tmr0-eb", "aon-apb", 0x0,
+ 0x1000, BIT(12), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(efuse_eb, "efuse-eb", "aon-apb", 0x0,
+ 0x1000, BIT(13), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(eic_eb, "eic-eb", "aon-apb", 0x0,
+ 0x1000, BIT(14), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pub1_reg_eb, "pub1-reg-eb", "aon-apb", 0x0,
+ 0x1000, BIT(15), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(adi_eb, "adi-eb", "aon-apb", 0x0,
+ 0x1000, BIT(16), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_intc0_eb, "ap-intc0-eb", "aon-apb", 0x0,
+ 0x1000, BIT(17), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_intc1_eb, "ap-intc1-eb", "aon-apb", 0x0,
+ 0x1000, BIT(18), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_intc2_eb, "ap-intc2-eb", "aon-apb", 0x0,
+ 0x1000, BIT(19), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_intc3_eb, "ap-intc3-eb", "aon-apb", 0x0,
+ 0x1000, BIT(20), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_intc4_eb, "ap-intc4-eb", "aon-apb", 0x0,
+ 0x1000, BIT(21), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(splk_eb, "splk-eb", "aon-apb", 0x0,
+ 0x1000, BIT(22), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(mspi_eb, "mspi-eb", "aon-apb", 0x0,
+ 0x1000, BIT(23), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pub0_reg_eb, "pub0-reg-eb", "aon-apb", 0x0,
+ 0x1000, BIT(24), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pin_eb, "pin-eb", "aon-apb", 0x0,
+ 0x1000, BIT(25), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aon_ckg_eb, "aon-ckg-eb", "aon-apb", 0x0,
+ 0x1000, BIT(26), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(gpu_eb, "gpu-eb", "aon-apb", 0x0,
+ 0x1000, BIT(27), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(apcpu_ts0_eb, "apcpu-ts0-eb", "aon-apb", 0x0,
+ 0x1000, BIT(28), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(apcpu_ts1_eb, "apcpu-ts1-eb", "aon-apb", 0x0,
+ 0x1000, BIT(29), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dap_eb, "dap-eb", "aon-apb", 0x0,
+ 0x1000, BIT(30), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c_eb, "i2c-eb", "aon-apb", 0x0,
+ 0x1000, BIT(31), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pmu_eb, "pmu-eb", "aon-apb", 0x4,
+ 0x1000, BIT(0), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(thm_eb, "thm-eb", "aon-apb", 0x4,
+ 0x1000, BIT(1), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aux0_eb, "aux0-eb", "aon-apb", 0x4,
+ 0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aux1_eb, "aux1-eb", "aon-apb", 0x4,
+ 0x1000, BIT(3), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aux2_eb, "aux2-eb", "aon-apb", 0x4,
+ 0x1000, BIT(4), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(probe_eb, "probe-eb", "aon-apb", 0x4,
+ 0x1000, BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(gpu0_avs_eb, "gpu0-avs-eb", "aon-apb", 0x4,
+ 0x1000, BIT(6), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(gpu1_avs_eb, "gpu1-avs-eb", "aon-apb", 0x4,
+ 0x1000, BIT(7), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(apcpu_wdg_eb, "apcpu-wdg-eb", "aon-apb", 0x4,
+ 0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_tmr1_eb, "ap-tmr1-eb", "aon-apb", 0x4,
+ 0x1000, BIT(9), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_tmr2_eb, "ap-tmr2-eb", "aon-apb", 0x4,
+ 0x1000, BIT(10), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(disp_emc_eb, "disp-emc-eb", "aon-apb", 0x4,
+ 0x1000, BIT(11), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(zip_emc_eb, "zip-emc-eb", "aon-apb", 0x4,
+ 0x1000, BIT(12), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(gsp_emc_eb, "gsp-emc-eb", "aon-apb", 0x4,
+ 0x1000, BIT(13), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(osc_aon_eb, "osc-aon-eb", "aon-apb", 0x4,
+ 0x1000, BIT(14), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(lvds_trx_eb, "lvds-trx-eb", "aon-apb", 0x4,
+ 0x1000, BIT(15), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(lvds_tcxo_eb, "lvds-tcxo-eb", "aon-apb", 0x4,
+ 0x1000, BIT(16), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(mdar_eb, "mdar-eb", "aon-apb", 0x4,
+ 0x1000, BIT(17), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(rtc4m0_cal_eb, "rtc4m0-cal-eb", "aon-apb", 0x4,
+ 0x1000, BIT(18), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(rct100m_cal_eb, "rct100m-cal-eb", "aon-apb", 0x4,
+ 0x1000, BIT(19), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(djtag_eb, "djtag-eb", "aon-apb", 0x4,
+ 0x1000, BIT(20), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(mbox_eb, "mbox-eb", "aon-apb", 0x4,
+ 0x1000, BIT(21), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aon_dma_eb, "aon-dma-eb", "aon-apb", 0x4,
+ 0x1000, BIT(22), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dbg_emc_eb, "dbg-emc-eb", "aon-apb", 0x4,
+ 0x1000, BIT(23), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(lvds_pll_div_en, "lvds-pll-div-en", "aon-apb", 0x4,
+ 0x1000, BIT(24), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(def_eb, "def-eb", "aon-apb", 0x4,
+ 0x1000, BIT(25), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aon_apb_rsv0, "aon-apb-rsv0", "aon-apb", 0x4,
+ 0x1000, BIT(26), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(orp_jtag_eb, "orp-jtag-eb", "aon-apb", 0x4,
+ 0x1000, BIT(27), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(vsp_eb, "vsp-eb", "aon-apb", 0x4,
+ 0x1000, BIT(28), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(cam_eb, "cam-eb", "aon-apb", 0x4,
+ 0x1000, BIT(29), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(disp_eb, "disp-eb", "aon-apb", 0x4,
+ 0x1000, BIT(30), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dbg_axi_if_eb, "dbg-axi-if-eb", "aon-apb", 0x4,
+ 0x1000, BIT(31), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(sdio0_2x_en, "sdio0-2x-en", "aon-apb", 0x13c,
+ 0x1000, BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK(sdio1_2x_en, "sdio1-2x-en", "aon-apb", 0x13c,
+ 0x1000, BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK(sdio2_2x_en, "sdio2-2x-en", "aon-apb", 0x13c,
+ 0x1000, BIT(6), 0, 0);
+static SPRD_SC_GATE_CLK(emmc_2x_en, "emmc-2x-en", "aon-apb", 0x13c,
+ 0x1000, BIT(9), 0, 0);
+
+static struct sprd_clk_common *sc9860_aon_gate[] = {
+ /* address base is 0x402e0000 */
+ &avs_lit_eb.common,
+ &avs_big_eb.common,
+ &ap_intc5_eb.common,
+ &gpio_eb.common,
+ &pwm0_eb.common,
+ &pwm1_eb.common,
+ &pwm2_eb.common,
+ &pwm3_eb.common,
+ &kpd_eb.common,
+ &aon_sys_eb.common,
+ &ap_sys_eb.common,
+ &aon_tmr_eb.common,
+ &ap_tmr0_eb.common,
+ &efuse_eb.common,
+ &eic_eb.common,
+ &pub1_reg_eb.common,
+ &adi_eb.common,
+ &ap_intc0_eb.common,
+ &ap_intc1_eb.common,
+ &ap_intc2_eb.common,
+ &ap_intc3_eb.common,
+ &ap_intc4_eb.common,
+ &splk_eb.common,
+ &mspi_eb.common,
+ &pub0_reg_eb.common,
+ &pin_eb.common,
+ &aon_ckg_eb.common,
+ &gpu_eb.common,
+ &apcpu_ts0_eb.common,
+ &apcpu_ts1_eb.common,
+ &dap_eb.common,
+ &i2c_eb.common,
+ &pmu_eb.common,
+ &thm_eb.common,
+ &aux0_eb.common,
+ &aux1_eb.common,
+ &aux2_eb.common,
+ &probe_eb.common,
+ &gpu0_avs_eb.common,
+ &gpu1_avs_eb.common,
+ &apcpu_wdg_eb.common,
+ &ap_tmr1_eb.common,
+ &ap_tmr2_eb.common,
+ &disp_emc_eb.common,
+ &zip_emc_eb.common,
+ &gsp_emc_eb.common,
+ &osc_aon_eb.common,
+ &lvds_trx_eb.common,
+ &lvds_tcxo_eb.common,
+ &mdar_eb.common,
+ &rtc4m0_cal_eb.common,
+ &rct100m_cal_eb.common,
+ &djtag_eb.common,
+ &mbox_eb.common,
+ &aon_dma_eb.common,
+ &dbg_emc_eb.common,
+ &lvds_pll_div_en.common,
+ &def_eb.common,
+ &aon_apb_rsv0.common,
+ &orp_jtag_eb.common,
+ &vsp_eb.common,
+ &cam_eb.common,
+ &disp_eb.common,
+ &dbg_axi_if_eb.common,
+ &sdio0_2x_en.common,
+ &sdio1_2x_en.common,
+ &sdio2_2x_en.common,
+ &emmc_2x_en.common,
+};
+
+static struct clk_hw_onecell_data sc9860_aon_gate_hws = {
+ .hws = {
+ [CLK_AVS_LIT_EB] = &avs_lit_eb.common.hw,
+ [CLK_AVS_BIG_EB] = &avs_big_eb.common.hw,
+ [CLK_AP_INTC5_EB] = &ap_intc5_eb.common.hw,
+ [CLK_GPIO_EB] = &gpio_eb.common.hw,
+ [CLK_PWM0_EB] = &pwm0_eb.common.hw,
+ [CLK_PWM1_EB] = &pwm1_eb.common.hw,
+ [CLK_PWM2_EB] = &pwm2_eb.common.hw,
+ [CLK_PWM3_EB] = &pwm3_eb.common.hw,
+ [CLK_KPD_EB] = &kpd_eb.common.hw,
+ [CLK_AON_SYS_EB] = &aon_sys_eb.common.hw,
+ [CLK_AP_SYS_EB] = &ap_sys_eb.common.hw,
+ [CLK_AON_TMR_EB] = &aon_tmr_eb.common.hw,
+ [CLK_AP_TMR0_EB] = &ap_tmr0_eb.common.hw,
+ [CLK_EFUSE_EB] = &efuse_eb.common.hw,
+ [CLK_EIC_EB] = &eic_eb.common.hw,
+ [CLK_PUB1_REG_EB] = &pub1_reg_eb.common.hw,
+ [CLK_ADI_EB] = &adi_eb.common.hw,
+ [CLK_AP_INTC0_EB] = &ap_intc0_eb.common.hw,
+ [CLK_AP_INTC1_EB] = &ap_intc1_eb.common.hw,
+ [CLK_AP_INTC2_EB] = &ap_intc2_eb.common.hw,
+ [CLK_AP_INTC3_EB] = &ap_intc3_eb.common.hw,
+ [CLK_AP_INTC4_EB] = &ap_intc4_eb.common.hw,
+ [CLK_SPLK_EB] = &splk_eb.common.hw,
+ [CLK_MSPI_EB] = &mspi_eb.common.hw,
+ [CLK_PUB0_REG_EB] = &pub0_reg_eb.common.hw,
+ [CLK_PIN_EB] = &pin_eb.common.hw,
+ [CLK_AON_CKG_EB] = &aon_ckg_eb.common.hw,
+ [CLK_GPU_EB] = &gpu_eb.common.hw,
+ [CLK_APCPU_TS0_EB] = &apcpu_ts0_eb.common.hw,
+ [CLK_APCPU_TS1_EB] = &apcpu_ts1_eb.common.hw,
+ [CLK_DAP_EB] = &dap_eb.common.hw,
+ [CLK_I2C_EB] = &i2c_eb.common.hw,
+ [CLK_PMU_EB] = &pmu_eb.common.hw,
+ [CLK_THM_EB] = &thm_eb.common.hw,
+ [CLK_AUX0_EB] = &aux0_eb.common.hw,
+ [CLK_AUX1_EB] = &aux1_eb.common.hw,
+ [CLK_AUX2_EB] = &aux2_eb.common.hw,
+ [CLK_PROBE_EB] = &probe_eb.common.hw,
+ [CLK_GPU0_AVS_EB] = &gpu0_avs_eb.common.hw,
+ [CLK_GPU1_AVS_EB] = &gpu1_avs_eb.common.hw,
+ [CLK_APCPU_WDG_EB] = &apcpu_wdg_eb.common.hw,
+ [CLK_AP_TMR1_EB] = &ap_tmr1_eb.common.hw,
+ [CLK_AP_TMR2_EB] = &ap_tmr2_eb.common.hw,
+ [CLK_DISP_EMC_EB] = &disp_emc_eb.common.hw,
+ [CLK_ZIP_EMC_EB] = &zip_emc_eb.common.hw,
+ [CLK_GSP_EMC_EB] = &gsp_emc_eb.common.hw,
+ [CLK_OSC_AON_EB] = &osc_aon_eb.common.hw,
+ [CLK_LVDS_TRX_EB] = &lvds_trx_eb.common.hw,
+ [CLK_LVDS_TCXO_EB] = &lvds_tcxo_eb.common.hw,
+ [CLK_MDAR_EB] = &mdar_eb.common.hw,
+ [CLK_RTC4M0_CAL_EB] = &rtc4m0_cal_eb.common.hw,
+ [CLK_RCT100M_CAL_EB] = &rct100m_cal_eb.common.hw,
+ [CLK_DJTAG_EB] = &djtag_eb.common.hw,
+ [CLK_MBOX_EB] = &mbox_eb.common.hw,
+ [CLK_AON_DMA_EB] = &aon_dma_eb.common.hw,
+ [CLK_DBG_EMC_EB] = &dbg_emc_eb.common.hw,
+ [CLK_LVDS_PLL_DIV_EN] = &lvds_pll_div_en.common.hw,
+ [CLK_DEF_EB] = &def_eb.common.hw,
+ [CLK_AON_APB_RSV0] = &aon_apb_rsv0.common.hw,
+ [CLK_ORP_JTAG_EB] = &orp_jtag_eb.common.hw,
+ [CLK_VSP_EB] = &vsp_eb.common.hw,
+ [CLK_CAM_EB] = &cam_eb.common.hw,
+ [CLK_DISP_EB] = &disp_eb.common.hw,
+ [CLK_DBG_AXI_IF_EB] = &dbg_axi_if_eb.common.hw,
+ [CLK_SDIO0_2X_EN] = &sdio0_2x_en.common.hw,
+ [CLK_SDIO1_2X_EN] = &sdio1_2x_en.common.hw,
+ [CLK_SDIO2_2X_EN] = &sdio2_2x_en.common.hw,
+ [CLK_EMMC_2X_EN] = &emmc_2x_en.common.hw,
+ },
+ .num = CLK_AON_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_aon_gate_desc = {
+ .clk_clks = sc9860_aon_gate,
+ .num_clk_clks = ARRAY_SIZE(sc9860_aon_gate),
+ .hw_clks = &sc9860_aon_gate_hws,
+};
+
+static const u8 mcu_table[] = { 0, 1, 2, 3, 4, 8 };
+static const char * const lit_mcu_parents[] = { "ext-26m", "twpll-512m",
+ "twpll-768m", "ltepll0",
+ "twpll", "mpll0" };
+static SPRD_COMP_CLK_TABLE(lit_mcu, "lit-mcu", lit_mcu_parents, 0x20,
+ mcu_table, 0, 4, 4, 3, 0);
+
+static const char * const big_mcu_parents[] = { "ext-26m", "twpll-512m",
+ "twpll-768m", "ltepll0",
+ "twpll", "mpll1" };
+static SPRD_COMP_CLK_TABLE(big_mcu, "big-mcu", big_mcu_parents, 0x24,
+ mcu_table, 0, 4, 4, 3, 0);
+
+static struct sprd_clk_common *sc9860_aonsecure_clk[] = {
+ /* address base is 0x40880000 */
+ &lit_mcu.common,
+ &big_mcu.common,
+};
+
+static struct clk_hw_onecell_data sc9860_aonsecure_clk_hws = {
+ .hws = {
+ [CLK_LIT_MCU] = &lit_mcu.common.hw,
+ [CLK_BIG_MCU] = &big_mcu.common.hw,
+ },
+ .num = CLK_AONSECURE_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_aonsecure_clk_desc = {
+ .clk_clks = sc9860_aonsecure_clk,
+ .num_clk_clks = ARRAY_SIZE(sc9860_aonsecure_clk),
+ .hw_clks = &sc9860_aonsecure_clk_hws,
+};
+
+static SPRD_SC_GATE_CLK(agcp_iis0_eb, "agcp-iis0-eb", "aon-apb",
+ 0x0, 0x100, BIT(0), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_iis1_eb, "agcp-iis1-eb", "aon-apb",
+ 0x0, 0x100, BIT(1), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_iis2_eb, "agcp-iis2-eb", "aon-apb",
+ 0x0, 0x100, BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_iis3_eb, "agcp-iis3-eb", "aon-apb",
+ 0x0, 0x100, BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_uart_eb, "agcp-uart-eb", "aon-apb",
+ 0x0, 0x100, BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_dmacp_eb, "agcp-dmacp-eb", "aon-apb",
+ 0x0, 0x100, BIT(5), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_dmaap_eb, "agcp-dmaap-eb", "aon-apb",
+ 0x0, 0x100, BIT(6), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_arc48k_eb, "agcp-arc48k-eb", "aon-apb",
+ 0x0, 0x100, BIT(10), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_src44p1k_eb, "agcp-src44p1k-eb", "aon-apb",
+ 0x0, 0x100, BIT(11), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_mcdt_eb, "agcp-mcdt-eb", "aon-apb",
+ 0x0, 0x100, BIT(12), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_vbcifd_eb, "agcp-vbcifd-eb", "aon-apb",
+ 0x0, 0x100, BIT(13), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_vbc_eb, "agcp-vbc-eb", "aon-apb",
+ 0x0, 0x100, BIT(14), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_spinlock_eb, "agcp-spinlock-eb", "aon-apb",
+ 0x0, 0x100, BIT(15), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_icu_eb, "agcp-icu-eb", "aon-apb",
+ 0x0, 0x100, BIT(16), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(agcp_ap_ashb_eb, "agcp-ap-ashb-eb", "aon-apb",
+ 0x0, 0x100, BIT(17), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_cp_ashb_eb, "agcp-cp-ashb-eb", "aon-apb",
+ 0x0, 0x100, BIT(18), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_aud_eb, "agcp-aud-eb", "aon-apb",
+ 0x0, 0x100, BIT(19), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_audif_eb, "agcp-audif-eb", "aon-apb",
+ 0x0, 0x100, BIT(20), 0, 0);
+
+static struct sprd_clk_common *sc9860_agcp_gate[] = {
+ /* address base is 0x415e0000 */
+ &agcp_iis0_eb.common,
+ &agcp_iis1_eb.common,
+ &agcp_iis2_eb.common,
+ &agcp_iis3_eb.common,
+ &agcp_uart_eb.common,
+ &agcp_dmacp_eb.common,
+ &agcp_dmaap_eb.common,
+ &agcp_arc48k_eb.common,
+ &agcp_src44p1k_eb.common,
+ &agcp_mcdt_eb.common,
+ &agcp_vbcifd_eb.common,
+ &agcp_vbc_eb.common,
+ &agcp_spinlock_eb.common,
+ &agcp_icu_eb.common,
+ &agcp_ap_ashb_eb.common,
+ &agcp_cp_ashb_eb.common,
+ &agcp_aud_eb.common,
+ &agcp_audif_eb.common,
+};
+
+static struct clk_hw_onecell_data sc9860_agcp_gate_hws = {
+ .hws = {
+ [CLK_AGCP_IIS0_EB] = &agcp_iis0_eb.common.hw,
+ [CLK_AGCP_IIS1_EB] = &agcp_iis1_eb.common.hw,
+ [CLK_AGCP_IIS2_EB] = &agcp_iis2_eb.common.hw,
+ [CLK_AGCP_IIS3_EB] = &agcp_iis3_eb.common.hw,
+ [CLK_AGCP_UART_EB] = &agcp_uart_eb.common.hw,
+ [CLK_AGCP_DMACP_EB] = &agcp_dmacp_eb.common.hw,
+ [CLK_AGCP_DMAAP_EB] = &agcp_dmaap_eb.common.hw,
+ [CLK_AGCP_ARC48K_EB] = &agcp_arc48k_eb.common.hw,
+ [CLK_AGCP_SRC44P1K_EB] = &agcp_src44p1k_eb.common.hw,
+ [CLK_AGCP_MCDT_EB] = &agcp_mcdt_eb.common.hw,
+ [CLK_AGCP_VBCIFD_EB] = &agcp_vbcifd_eb.common.hw,
+ [CLK_AGCP_VBC_EB] = &agcp_vbc_eb.common.hw,
+ [CLK_AGCP_SPINLOCK_EB] = &agcp_spinlock_eb.common.hw,
+ [CLK_AGCP_ICU_EB] = &agcp_icu_eb.common.hw,
+ [CLK_AGCP_AP_ASHB_EB] = &agcp_ap_ashb_eb.common.hw,
+ [CLK_AGCP_CP_ASHB_EB] = &agcp_cp_ashb_eb.common.hw,
+ [CLK_AGCP_AUD_EB] = &agcp_aud_eb.common.hw,
+ [CLK_AGCP_AUDIF_EB] = &agcp_audif_eb.common.hw,
+ },
+ .num = CLK_AGCP_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_agcp_gate_desc = {
+ .clk_clks = sc9860_agcp_gate,
+ .num_clk_clks = ARRAY_SIZE(sc9860_agcp_gate),
+ .hw_clks = &sc9860_agcp_gate_hws,
+};
+
+static const char * const gpu_parents[] = { "twpll-512m",
+ "twpll-768m",
+ "gpll" };
+static SPRD_COMP_CLK(gpu_clk, "gpu", gpu_parents, 0x20,
+ 0, 2, 8, 4, 0);
+
+static struct sprd_clk_common *sc9860_gpu_clk[] = {
+ /* address base is 0x60200000 */
+ &gpu_clk.common,
+};
+
+static struct clk_hw_onecell_data sc9860_gpu_clk_hws = {
+ .hws = {
+ [CLK_GPU] = &gpu_clk.common.hw,
+ },
+ .num = CLK_GPU_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_gpu_clk_desc = {
+ .clk_clks = sc9860_gpu_clk,
+ .num_clk_clks = ARRAY_SIZE(sc9860_gpu_clk),
+ .hw_clks = &sc9860_gpu_clk_hws,
+};
+
+static const char * const ahb_parents[] = { "ext-26m", "twpll-96m",
+ "twpll-128m", "twpll-153m6" };
+static SPRD_MUX_CLK(ahb_vsp, "ahb-vsp", ahb_parents, 0x20,
+ 0, 2, SC9860_MUX_FLAG);
+
+static const char * const vsp_parents[] = { "twpll-76m8", "twpll-128m",
+ "twpll-256m", "twpll-307m2",
+ "twpll-384m" };
+static SPRD_COMP_CLK(vsp_clk, "vsp", vsp_parents, 0x24, 0, 3, 8, 2, 0);
+
+static const char * const dispc_parents[] = { "twpll-76m8", "twpll-128m",
+ "twpll-256m", "twpll-307m2" };
+static SPRD_COMP_CLK(vsp_enc, "vsp-enc", dispc_parents, 0x28, 0, 2, 8, 2, 0);
+
+static const char * const vpp_parents[] = { "twpll-96m", "twpll-153m6",
+ "twpll-192m", "twpll-256m" };
+static SPRD_MUX_CLK(vpp_clk, "vpp", vpp_parents, 0x2c,
+ 0, 2, SC9860_MUX_FLAG);
+static const char * const vsp_26m_parents[] = { "ext-26m" };
+static SPRD_MUX_CLK(vsp_26m, "vsp-26m", vsp_26m_parents, 0x30,
+ 0, 1, SC9860_MUX_FLAG);
+
+static struct sprd_clk_common *sc9860_vsp_clk[] = {
+ /* address base is 0x61000000 */
+ &ahb_vsp.common,
+ &vsp_clk.common,
+ &vsp_enc.common,
+ &vpp_clk.common,
+ &vsp_26m.common,
+};
+
+static struct clk_hw_onecell_data sc9860_vsp_clk_hws = {
+ .hws = {
+ [CLK_AHB_VSP] = &ahb_vsp.common.hw,
+ [CLK_VSP] = &vsp_clk.common.hw,
+ [CLK_VSP_ENC] = &vsp_enc.common.hw,
+ [CLK_VPP] = &vpp_clk.common.hw,
+ [CLK_VSP_26M] = &vsp_26m.common.hw,
+ },
+ .num = CLK_VSP_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_vsp_clk_desc = {
+ .clk_clks = sc9860_vsp_clk,
+ .num_clk_clks = ARRAY_SIZE(sc9860_vsp_clk),
+ .hw_clks = &sc9860_vsp_clk_hws,
+};
+
+static SPRD_SC_GATE_CLK(vsp_dec_eb, "vsp-dec-eb", "ahb-vsp", 0x0,
+ 0x1000, BIT(0), 0, 0);
+static SPRD_SC_GATE_CLK(vsp_ckg_eb, "vsp-ckg-eb", "ahb-vsp", 0x0,
+ 0x1000, BIT(1), 0, 0);
+static SPRD_SC_GATE_CLK(vsp_mmu_eb, "vsp-mmu-eb", "ahb-vsp", 0x0,
+ 0x1000, BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK(vsp_enc_eb, "vsp-enc-eb", "ahb-vsp", 0x0,
+ 0x1000, BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK(vpp_eb, "vpp-eb", "ahb-vsp", 0x0,
+ 0x1000, BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK(vsp_26m_eb, "vsp-26m-eb", "ahb-vsp", 0x0,
+ 0x1000, BIT(5), 0, 0);
+static SPRD_GATE_CLK(vsp_axi_gate, "vsp-axi-gate", "ahb-vsp", 0x8,
+ BIT(0), 0, 0);
+static SPRD_GATE_CLK(vsp_enc_gate, "vsp-enc-gate", "ahb-vsp", 0x8,
+ BIT(1), 0, 0);
+static SPRD_GATE_CLK(vpp_axi_gate, "vpp-axi-gate", "ahb-vsp", 0x8,
+ BIT(2), 0, 0);
+static SPRD_GATE_CLK(vsp_bm_gate, "vsp-bm-gate", "ahb-vsp", 0x8,
+ BIT(8), 0, 0);
+static SPRD_GATE_CLK(vsp_enc_bm_gate, "vsp-enc-bm-gate", "ahb-vsp", 0x8,
+ BIT(9), 0, 0);
+static SPRD_GATE_CLK(vpp_bm_gate, "vpp-bm-gate", "ahb-vsp", 0x8,
+ BIT(10), 0, 0);
+
+static struct sprd_clk_common *sc9860_vsp_gate[] = {
+ /* address base is 0x61100000 */
+ &vsp_dec_eb.common,
+ &vsp_ckg_eb.common,
+ &vsp_mmu_eb.common,
+ &vsp_enc_eb.common,
+ &vpp_eb.common,
+ &vsp_26m_eb.common,
+ &vsp_axi_gate.common,
+ &vsp_enc_gate.common,
+ &vpp_axi_gate.common,
+ &vsp_bm_gate.common,
+ &vsp_enc_bm_gate.common,
+ &vpp_bm_gate.common,
+};
+
+static struct clk_hw_onecell_data sc9860_vsp_gate_hws = {
+ .hws = {
+ [CLK_VSP_DEC_EB] = &vsp_dec_eb.common.hw,
+ [CLK_VSP_CKG_EB] = &vsp_ckg_eb.common.hw,
+ [CLK_VSP_MMU_EB] = &vsp_mmu_eb.common.hw,
+ [CLK_VSP_ENC_EB] = &vsp_enc_eb.common.hw,
+ [CLK_VPP_EB] = &vpp_eb.common.hw,
+ [CLK_VSP_26M_EB] = &vsp_26m_eb.common.hw,
+ [CLK_VSP_AXI_GATE] = &vsp_axi_gate.common.hw,
+ [CLK_VSP_ENC_GATE] = &vsp_enc_gate.common.hw,
+ [CLK_VPP_AXI_GATE] = &vpp_axi_gate.common.hw,
+ [CLK_VSP_BM_GATE] = &vsp_bm_gate.common.hw,
+ [CLK_VSP_ENC_BM_GATE] = &vsp_enc_bm_gate.common.hw,
+ [CLK_VPP_BM_GATE] = &vpp_bm_gate.common.hw,
+ },
+ .num = CLK_VSP_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_vsp_gate_desc = {
+ .clk_clks = sc9860_vsp_gate,
+ .num_clk_clks = ARRAY_SIZE(sc9860_vsp_gate),
+ .hw_clks = &sc9860_vsp_gate_hws,
+};
+
+static SPRD_MUX_CLK(ahb_cam, "ahb-cam", ahb_parents, 0x20,
+ 0, 2, SC9860_MUX_FLAG);
+static const char * const sensor_parents[] = { "ext-26m", "twpll-48m",
+ "twpll-76m8", "twpll-96m" };
+static SPRD_COMP_CLK(sensor0_clk, "sensor0", sensor_parents, 0x24,
+ 0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(sensor1_clk, "sensor1", sensor_parents, 0x28,
+ 0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(sensor2_clk, "sensor2", sensor_parents, 0x2c,
+ 0, 2, 8, 3, 0);
+static SPRD_GATE_CLK(mipi_csi0_eb, "mipi-csi0-eb", "ahb-cam", 0x4c,
+ BIT(16), 0, 0);
+static SPRD_GATE_CLK(mipi_csi1_eb, "mipi-csi1-eb", "ahb-cam", 0x50,
+ BIT(16), 0, 0);
+
+static struct sprd_clk_common *sc9860_cam_clk[] = {
+ /* address base is 0x62000000 */
+ &ahb_cam.common,
+ &sensor0_clk.common,
+ &sensor1_clk.common,
+ &sensor2_clk.common,
+ &mipi_csi0_eb.common,
+ &mipi_csi1_eb.common,
+};
+
+static struct clk_hw_onecell_data sc9860_cam_clk_hws = {
+ .hws = {
+ [CLK_AHB_CAM] = &ahb_cam.common.hw,
+ [CLK_SENSOR0] = &sensor0_clk.common.hw,
+ [CLK_SENSOR1] = &sensor1_clk.common.hw,
+ [CLK_SENSOR2] = &sensor2_clk.common.hw,
+ [CLK_MIPI_CSI0_EB] = &mipi_csi0_eb.common.hw,
+ [CLK_MIPI_CSI1_EB] = &mipi_csi1_eb.common.hw,
+ },
+ .num = CLK_CAM_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_cam_clk_desc = {
+ .clk_clks = sc9860_cam_clk,
+ .num_clk_clks = ARRAY_SIZE(sc9860_cam_clk),
+ .hw_clks = &sc9860_cam_clk_hws,
+};
+
+static SPRD_SC_GATE_CLK(dcam0_eb, "dcam0-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(0), 0, 0);
+static SPRD_SC_GATE_CLK(dcam1_eb, "dcam1-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(1), 0, 0);
+static SPRD_SC_GATE_CLK(isp0_eb, "isp0-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK(csi0_eb, "csi0-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK(csi1_eb, "csi1-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK(jpg0_eb, "jpg0-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(5), 0, 0);
+static SPRD_SC_GATE_CLK(jpg1_eb, "jpg1-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(6), 0, 0);
+static SPRD_SC_GATE_CLK(cam_ckg_eb, "cam-ckg-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(7), 0, 0);
+static SPRD_SC_GATE_CLK(cam_mmu_eb, "cam-mmu-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(8), 0, 0);
+static SPRD_SC_GATE_CLK(isp1_eb, "isp1-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(9), 0, 0);
+static SPRD_SC_GATE_CLK(cpp_eb, "cpp-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(10), 0, 0);
+static SPRD_SC_GATE_CLK(mmu_pf_eb, "mmu-pf-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(11), 0, 0);
+static SPRD_SC_GATE_CLK(isp2_eb, "isp2-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(12), 0, 0);
+static SPRD_SC_GATE_CLK(dcam2isp_if_eb, "dcam2isp-if-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(13), 0, 0);
+static SPRD_SC_GATE_CLK(isp2dcam_if_eb, "isp2dcam-if-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(14), 0, 0);
+static SPRD_SC_GATE_CLK(isp_lclk_eb, "isp-lclk-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(15), 0, 0);
+static SPRD_SC_GATE_CLK(isp_iclk_eb, "isp-iclk-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(16), 0, 0);
+static SPRD_SC_GATE_CLK(isp_mclk_eb, "isp-mclk-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(17), 0, 0);
+static SPRD_SC_GATE_CLK(isp_pclk_eb, "isp-pclk-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(18), 0, 0);
+static SPRD_SC_GATE_CLK(isp_isp2dcam_eb, "isp-isp2dcam-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(19), 0, 0);
+static SPRD_SC_GATE_CLK(dcam0_if_eb, "dcam0-if-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(20), 0, 0);
+static SPRD_SC_GATE_CLK(clk26m_if_eb, "clk26m-if-eb", "ahb-cam", 0x0,
+ 0x1000, BIT(21), 0, 0);
+static SPRD_GATE_CLK(cphy0_gate, "cphy0-gate", "ahb-cam", 0x8,
+ BIT(0), 0, 0);
+static SPRD_GATE_CLK(mipi_csi0_gate, "mipi-csi0-gate", "ahb-cam", 0x8,
+ BIT(1), 0, 0);
+static SPRD_GATE_CLK(cphy1_gate, "cphy1-gate", "ahb-cam", 0x8,
+ BIT(2), 0, 0);
+static SPRD_GATE_CLK(mipi_csi1, "mipi-csi1", "ahb-cam", 0x8,
+ BIT(3), 0, 0);
+static SPRD_GATE_CLK(dcam0_axi_gate, "dcam0-axi-gate", "ahb-cam", 0x8,
+ BIT(4), 0, 0);
+static SPRD_GATE_CLK(dcam1_axi_gate, "dcam1-axi-gate", "ahb-cam", 0x8,
+ BIT(5), 0, 0);
+static SPRD_GATE_CLK(sensor0_gate, "sensor0-gate", "ahb-cam", 0x8,
+ BIT(6), 0, 0);
+static SPRD_GATE_CLK(sensor1_gate, "sensor1-gate", "ahb-cam", 0x8,
+ BIT(7), 0, 0);
+static SPRD_GATE_CLK(jpg0_axi_gate, "jpg0-axi-gate", "ahb-cam", 0x8,
+ BIT(8), 0, 0);
+static SPRD_GATE_CLK(gpg1_axi_gate, "gpg1-axi-gate", "ahb-cam", 0x8,
+ BIT(9), 0, 0);
+static SPRD_GATE_CLK(isp0_axi_gate, "isp0-axi-gate", "ahb-cam", 0x8,
+ BIT(10), 0, 0);
+static SPRD_GATE_CLK(isp1_axi_gate, "isp1-axi-gate", "ahb-cam", 0x8,
+ BIT(11), 0, 0);
+static SPRD_GATE_CLK(isp2_axi_gate, "isp2-axi-gate", "ahb-cam", 0x8,
+ BIT(12), 0, 0);
+static SPRD_GATE_CLK(cpp_axi_gate, "cpp-axi-gate", "ahb-cam", 0x8,
+ BIT(13), 0, 0);
+static SPRD_GATE_CLK(d0_if_axi_gate, "d0-if-axi-gate", "ahb-cam", 0x8,
+ BIT(14), 0, 0);
+static SPRD_GATE_CLK(d2i_if_axi_gate, "d2i-if-axi-gate", "ahb-cam", 0x8,
+ BIT(15), 0, 0);
+static SPRD_GATE_CLK(i2d_if_axi_gate, "i2d-if-axi-gate", "ahb-cam", 0x8,
+ BIT(16), 0, 0);
+static SPRD_GATE_CLK(spare_axi_gate, "spare-axi-gate", "ahb-cam", 0x8,
+ BIT(17), 0, 0);
+static SPRD_GATE_CLK(sensor2_gate, "sensor2-gate", "ahb-cam", 0x8,
+ BIT(18), 0, 0);
+static SPRD_SC_GATE_CLK(d0if_in_d_en, "d0if-in-d-en", "ahb-cam", 0x28,
+ 0x1000, BIT(0), 0, 0);
+static SPRD_SC_GATE_CLK(d1if_in_d_en, "d1if-in-d-en", "ahb-cam", 0x28,
+ 0x1000, BIT(1), 0, 0);
+static SPRD_SC_GATE_CLK(d0if_in_d2i_en, "d0if-in-d2i-en", "ahb-cam", 0x28,
+ 0x1000, BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK(d1if_in_d2i_en, "d1if-in-d2i-en", "ahb-cam", 0x28,
+ 0x1000, BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK(ia_in_d2i_en, "ia-in-d2i-en", "ahb-cam", 0x28,
+ 0x1000, BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK(ib_in_d2i_en, "ib-in-d2i-en", "ahb-cam", 0x28,
+ 0x1000, BIT(5), 0, 0);
+static SPRD_SC_GATE_CLK(ic_in_d2i_en, "ic-in-d2i-en", "ahb-cam", 0x28,
+ 0x1000, BIT(6), 0, 0);
+static SPRD_SC_GATE_CLK(ia_in_i_en, "ia-in-i-en", "ahb-cam", 0x28,
+ 0x1000, BIT(7), 0, 0);
+static SPRD_SC_GATE_CLK(ib_in_i_en, "ib-in-i-en", "ahb-cam", 0x28,
+ 0x1000, BIT(8), 0, 0);
+static SPRD_SC_GATE_CLK(ic_in_i_en, "ic-in-i-en", "ahb-cam", 0x28,
+ 0x1000, BIT(9), 0, 0);
+
+static struct sprd_clk_common *sc9860_cam_gate[] = {
+ /* address base is 0x62100000 */
+ &dcam0_eb.common,
+ &dcam1_eb.common,
+ &isp0_eb.common,
+ &csi0_eb.common,
+ &csi1_eb.common,
+ &jpg0_eb.common,
+ &jpg1_eb.common,
+ &cam_ckg_eb.common,
+ &cam_mmu_eb.common,
+ &isp1_eb.common,
+ &cpp_eb.common,
+ &mmu_pf_eb.common,
+ &isp2_eb.common,
+ &dcam2isp_if_eb.common,
+ &isp2dcam_if_eb.common,
+ &isp_lclk_eb.common,
+ &isp_iclk_eb.common,
+ &isp_mclk_eb.common,
+ &isp_pclk_eb.common,
+ &isp_isp2dcam_eb.common,
+ &dcam0_if_eb.common,
+ &clk26m_if_eb.common,
+ &cphy0_gate.common,
+ &mipi_csi0_gate.common,
+ &cphy1_gate.common,
+ &mipi_csi1.common,
+ &dcam0_axi_gate.common,
+ &dcam1_axi_gate.common,
+ &sensor0_gate.common,
+ &sensor1_gate.common,
+ &jpg0_axi_gate.common,
+ &gpg1_axi_gate.common,
+ &isp0_axi_gate.common,
+ &isp1_axi_gate.common,
+ &isp2_axi_gate.common,
+ &cpp_axi_gate.common,
+ &d0_if_axi_gate.common,
+ &d2i_if_axi_gate.common,
+ &i2d_if_axi_gate.common,
+ &spare_axi_gate.common,
+ &sensor2_gate.common,
+ &d0if_in_d_en.common,
+ &d1if_in_d_en.common,
+ &d0if_in_d2i_en.common,
+ &d1if_in_d2i_en.common,
+ &ia_in_d2i_en.common,
+ &ib_in_d2i_en.common,
+ &ic_in_d2i_en.common,
+ &ia_in_i_en.common,
+ &ib_in_i_en.common,
+ &ic_in_i_en.common,
+};
+
+static struct clk_hw_onecell_data sc9860_cam_gate_hws = {
+ .hws = {
+ [CLK_DCAM0_EB] = &dcam0_eb.common.hw,
+ [CLK_DCAM1_EB] = &dcam1_eb.common.hw,
+ [CLK_ISP0_EB] = &isp0_eb.common.hw,
+ [CLK_CSI0_EB] = &csi0_eb.common.hw,
+ [CLK_CSI1_EB] = &csi1_eb.common.hw,
+ [CLK_JPG0_EB] = &jpg0_eb.common.hw,
+ [CLK_JPG1_EB] = &jpg1_eb.common.hw,
+ [CLK_CAM_CKG_EB] = &cam_ckg_eb.common.hw,
+ [CLK_CAM_MMU_EB] = &cam_mmu_eb.common.hw,
+ [CLK_ISP1_EB] = &isp1_eb.common.hw,
+ [CLK_CPP_EB] = &cpp_eb.common.hw,
+ [CLK_MMU_PF_EB] = &mmu_pf_eb.common.hw,
+ [CLK_ISP2_EB] = &isp2_eb.common.hw,
+ [CLK_DCAM2ISP_IF_EB] = &dcam2isp_if_eb.common.hw,
+ [CLK_ISP2DCAM_IF_EB] = &isp2dcam_if_eb.common.hw,
+ [CLK_ISP_LCLK_EB] = &isp_lclk_eb.common.hw,
+ [CLK_ISP_ICLK_EB] = &isp_iclk_eb.common.hw,
+ [CLK_ISP_MCLK_EB] = &isp_mclk_eb.common.hw,
+ [CLK_ISP_PCLK_EB] = &isp_pclk_eb.common.hw,
+ [CLK_ISP_ISP2DCAM_EB] = &isp_isp2dcam_eb.common.hw,
+ [CLK_DCAM0_IF_EB] = &dcam0_if_eb.common.hw,
+ [CLK_CLK26M_IF_EB] = &clk26m_if_eb.common.hw,
+ [CLK_CPHY0_GATE] = &cphy0_gate.common.hw,
+ [CLK_MIPI_CSI0_GATE] = &mipi_csi0_gate.common.hw,
+ [CLK_CPHY1_GATE] = &cphy1_gate.common.hw,
+ [CLK_MIPI_CSI1] = &mipi_csi1.common.hw,
+ [CLK_DCAM0_AXI_GATE] = &dcam0_axi_gate.common.hw,
+ [CLK_DCAM1_AXI_GATE] = &dcam1_axi_gate.common.hw,
+ [CLK_SENSOR0_GATE] = &sensor0_gate.common.hw,
+ [CLK_SENSOR1_GATE] = &sensor1_gate.common.hw,
+ [CLK_JPG0_AXI_GATE] = &jpg0_axi_gate.common.hw,
+ [CLK_GPG1_AXI_GATE] = &gpg1_axi_gate.common.hw,
+ [CLK_ISP0_AXI_GATE] = &isp0_axi_gate.common.hw,
+ [CLK_ISP1_AXI_GATE] = &isp1_axi_gate.common.hw,
+ [CLK_ISP2_AXI_GATE] = &isp2_axi_gate.common.hw,
+ [CLK_CPP_AXI_GATE] = &cpp_axi_gate.common.hw,
+ [CLK_D0_IF_AXI_GATE] = &d0_if_axi_gate.common.hw,
+ [CLK_D2I_IF_AXI_GATE] = &d2i_if_axi_gate.common.hw,
+ [CLK_I2D_IF_AXI_GATE] = &i2d_if_axi_gate.common.hw,
+ [CLK_SPARE_AXI_GATE] = &spare_axi_gate.common.hw,
+ [CLK_SENSOR2_GATE] = &sensor2_gate.common.hw,
+ [CLK_D0IF_IN_D_EN] = &d0if_in_d_en.common.hw,
+ [CLK_D1IF_IN_D_EN] = &d1if_in_d_en.common.hw,
+ [CLK_D0IF_IN_D2I_EN] = &d0if_in_d2i_en.common.hw,
+ [CLK_D1IF_IN_D2I_EN] = &d1if_in_d2i_en.common.hw,
+ [CLK_IA_IN_D2I_EN] = &ia_in_d2i_en.common.hw,
+ [CLK_IB_IN_D2I_EN] = &ib_in_d2i_en.common.hw,
+ [CLK_IC_IN_D2I_EN] = &ic_in_d2i_en.common.hw,
+ [CLK_IA_IN_I_EN] = &ia_in_i_en.common.hw,
+ [CLK_IB_IN_I_EN] = &ib_in_i_en.common.hw,
+ [CLK_IC_IN_I_EN] = &ic_in_i_en.common.hw,
+ },
+ .num = CLK_CAM_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_cam_gate_desc = {
+ .clk_clks = sc9860_cam_gate,
+ .num_clk_clks = ARRAY_SIZE(sc9860_cam_gate),
+ .hw_clks = &sc9860_cam_gate_hws,
+};
+
+static SPRD_MUX_CLK(ahb_disp, "ahb-disp", ahb_parents, 0x20,
+ 0, 2, SC9860_MUX_FLAG);
+static SPRD_COMP_CLK(dispc0_dpi, "dispc0-dpi", dispc_parents, 0x34,
+ 0, 2, 8, 2, 0);
+static SPRD_COMP_CLK(dispc1_dpi, "dispc1-dpi", dispc_parents, 0x40,
+ 0, 2, 8, 2, 0);
+
+static struct sprd_clk_common *sc9860_disp_clk[] = {
+ /* address base is 0x63000000 */
+ &ahb_disp.common,
+ &dispc0_dpi.common,
+ &dispc1_dpi.common,
+};
+
+static struct clk_hw_onecell_data sc9860_disp_clk_hws = {
+ .hws = {
+ [CLK_AHB_DISP] = &ahb_disp.common.hw,
+ [CLK_DISPC0_DPI] = &dispc0_dpi.common.hw,
+ [CLK_DISPC1_DPI] = &dispc1_dpi.common.hw,
+ },
+ .num = CLK_DISP_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_disp_clk_desc = {
+ .clk_clks = sc9860_disp_clk,
+ .num_clk_clks = ARRAY_SIZE(sc9860_disp_clk),
+ .hw_clks = &sc9860_disp_clk_hws,
+};
+
+static SPRD_SC_GATE_CLK(dispc0_eb, "dispc0-eb", "ahb-disp", 0x0,
+ 0x1000, BIT(0), 0, 0);
+static SPRD_SC_GATE_CLK(dispc1_eb, "dispc1-eb", "ahb-disp", 0x0,
+ 0x1000, BIT(1), 0, 0);
+static SPRD_SC_GATE_CLK(dispc_mmu_eb, "dispc-mmu-eb", "ahb-disp", 0x0,
+ 0x1000, BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK(gsp0_eb, "gsp0-eb", "ahb-disp", 0x0,
+ 0x1000, BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK(gsp1_eb, "gsp1-eb", "ahb-disp", 0x0,
+ 0x1000, BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK(gsp0_mmu_eb, "gsp0-mmu-eb", "ahb-disp", 0x0,
+ 0x1000, BIT(5), 0, 0);
+static SPRD_SC_GATE_CLK(gsp1_mmu_eb, "gsp1-mmu-eb", "ahb-disp", 0x0,
+ 0x1000, BIT(6), 0, 0);
+static SPRD_SC_GATE_CLK(dsi0_eb, "dsi0-eb", "ahb-disp", 0x0,
+ 0x1000, BIT(7), 0, 0);
+static SPRD_SC_GATE_CLK(dsi1_eb, "dsi1-eb", "ahb-disp", 0x0,
+ 0x1000, BIT(8), 0, 0);
+static SPRD_SC_GATE_CLK(disp_ckg_eb, "disp-ckg-eb", "ahb-disp", 0x0,
+ 0x1000, BIT(9), 0, 0);
+static SPRD_SC_GATE_CLK(disp_gpu_eb, "disp-gpu-eb", "ahb-disp", 0x0,
+ 0x1000, BIT(10), 0, 0);
+static SPRD_SC_GATE_CLK(gpu_mtx_eb, "gpu-mtx-eb", "ahb-disp", 0x0,
+ 0x1000, BIT(13), 0, 0);
+static SPRD_SC_GATE_CLK(gsp_mtx_eb, "gsp-mtx-eb", "ahb-disp", 0x0,
+ 0x1000, BIT(14), 0, 0);
+static SPRD_SC_GATE_CLK(tmc_mtx_eb, "tmc-mtx-eb", "ahb-disp", 0x0,
+ 0x1000, BIT(15), 0, 0);
+static SPRD_SC_GATE_CLK(dispc_mtx_eb, "dispc-mtx-eb", "ahb-disp", 0x0,
+ 0x1000, BIT(16), 0, 0);
+static SPRD_GATE_CLK(dphy0_gate, "dphy0-gate", "ahb-disp", 0x8,
+ BIT(0), 0, 0);
+static SPRD_GATE_CLK(dphy1_gate, "dphy1-gate", "ahb-disp", 0x8,
+ BIT(1), 0, 0);
+static SPRD_GATE_CLK(gsp0_a_gate, "gsp0-a-gate", "ahb-disp", 0x8,
+ BIT(2), 0, 0);
+static SPRD_GATE_CLK(gsp1_a_gate, "gsp1-a-gate", "ahb-disp", 0x8,
+ BIT(3), 0, 0);
+static SPRD_GATE_CLK(gsp0_f_gate, "gsp0-f-gate", "ahb-disp", 0x8,
+ BIT(4), 0, 0);
+static SPRD_GATE_CLK(gsp1_f_gate, "gsp1-f-gate", "ahb-disp", 0x8,
+ BIT(5), 0, 0);
+static SPRD_GATE_CLK(d_mtx_f_gate, "d-mtx-f-gate", "ahb-disp", 0x8,
+ BIT(6), 0, 0);
+static SPRD_GATE_CLK(d_mtx_a_gate, "d-mtx-a-gate", "ahb-disp", 0x8,
+ BIT(7), 0, 0);
+static SPRD_GATE_CLK(d_noc_f_gate, "d-noc-f-gate", "ahb-disp", 0x8,
+ BIT(8), 0, 0);
+static SPRD_GATE_CLK(d_noc_a_gate, "d-noc-a-gate", "ahb-disp", 0x8,
+ BIT(9), 0, 0);
+static SPRD_GATE_CLK(gsp_mtx_f_gate, "gsp-mtx-f-gate", "ahb-disp", 0x8,
+ BIT(10), 0, 0);
+static SPRD_GATE_CLK(gsp_mtx_a_gate, "gsp-mtx-a-gate", "ahb-disp", 0x8,
+ BIT(11), 0, 0);
+static SPRD_GATE_CLK(gsp_noc_f_gate, "gsp-noc-f-gate", "ahb-disp", 0x8,
+ BIT(12), 0, 0);
+static SPRD_GATE_CLK(gsp_noc_a_gate, "gsp-noc-a-gate", "ahb-disp", 0x8,
+ BIT(13), 0, 0);
+static SPRD_GATE_CLK(dispm0idle_gate, "dispm0idle-gate", "ahb-disp", 0x8,
+ BIT(14), 0, 0);
+static SPRD_GATE_CLK(gspm0idle_gate, "gspm0idle-gate", "ahb-disp", 0x8,
+ BIT(15), 0, 0);
+
+static struct sprd_clk_common *sc9860_disp_gate[] = {
+ /* address base is 0x63100000 */
+ &dispc0_eb.common,
+ &dispc1_eb.common,
+ &dispc_mmu_eb.common,
+ &gsp0_eb.common,
+ &gsp1_eb.common,
+ &gsp0_mmu_eb.common,
+ &gsp1_mmu_eb.common,
+ &dsi0_eb.common,
+ &dsi1_eb.common,
+ &disp_ckg_eb.common,
+ &disp_gpu_eb.common,
+ &gpu_mtx_eb.common,
+ &gsp_mtx_eb.common,
+ &tmc_mtx_eb.common,
+ &dispc_mtx_eb.common,
+ &dphy0_gate.common,
+ &dphy1_gate.common,
+ &gsp0_a_gate.common,
+ &gsp1_a_gate.common,
+ &gsp0_f_gate.common,
+ &gsp1_f_gate.common,
+ &d_mtx_f_gate.common,
+ &d_mtx_a_gate.common,
+ &d_noc_f_gate.common,
+ &d_noc_a_gate.common,
+ &gsp_mtx_f_gate.common,
+ &gsp_mtx_a_gate.common,
+ &gsp_noc_f_gate.common,
+ &gsp_noc_a_gate.common,
+ &dispm0idle_gate.common,
+ &gspm0idle_gate.common,
+};
+
+static struct clk_hw_onecell_data sc9860_disp_gate_hws = {
+ .hws = {
+ [CLK_DISPC0_EB] = &dispc0_eb.common.hw,
+ [CLK_DISPC1_EB] = &dispc1_eb.common.hw,
+ [CLK_DISPC_MMU_EB] = &dispc_mmu_eb.common.hw,
+ [CLK_GSP0_EB] = &gsp0_eb.common.hw,
+ [CLK_GSP1_EB] = &gsp1_eb.common.hw,
+ [CLK_GSP0_MMU_EB] = &gsp0_mmu_eb.common.hw,
+ [CLK_GSP1_MMU_EB] = &gsp1_mmu_eb.common.hw,
+ [CLK_DSI0_EB] = &dsi0_eb.common.hw,
+ [CLK_DSI1_EB] = &dsi1_eb.common.hw,
+ [CLK_DISP_CKG_EB] = &disp_ckg_eb.common.hw,
+ [CLK_DISP_GPU_EB] = &disp_gpu_eb.common.hw,
+ [CLK_GPU_MTX_EB] = &gpu_mtx_eb.common.hw,
+ [CLK_GSP_MTX_EB] = &gsp_mtx_eb.common.hw,
+ [CLK_TMC_MTX_EB] = &tmc_mtx_eb.common.hw,
+ [CLK_DISPC_MTX_EB] = &dispc_mtx_eb.common.hw,
+ [CLK_DPHY0_GATE] = &dphy0_gate.common.hw,
+ [CLK_DPHY1_GATE] = &dphy1_gate.common.hw,
+ [CLK_GSP0_A_GATE] = &gsp0_a_gate.common.hw,
+ [CLK_GSP1_A_GATE] = &gsp1_a_gate.common.hw,
+ [CLK_GSP0_F_GATE] = &gsp0_f_gate.common.hw,
+ [CLK_GSP1_F_GATE] = &gsp1_f_gate.common.hw,
+ [CLK_D_MTX_F_GATE] = &d_mtx_f_gate.common.hw,
+ [CLK_D_MTX_A_GATE] = &d_mtx_a_gate.common.hw,
+ [CLK_D_NOC_F_GATE] = &d_noc_f_gate.common.hw,
+ [CLK_D_NOC_A_GATE] = &d_noc_a_gate.common.hw,
+ [CLK_GSP_MTX_F_GATE] = &gsp_mtx_f_gate.common.hw,
+ [CLK_GSP_MTX_A_GATE] = &gsp_mtx_a_gate.common.hw,
+ [CLK_GSP_NOC_F_GATE] = &gsp_noc_f_gate.common.hw,
+ [CLK_GSP_NOC_A_GATE] = &gsp_noc_a_gate.common.hw,
+ [CLK_DISPM0IDLE_GATE] = &dispm0idle_gate.common.hw,
+ [CLK_GSPM0IDLE_GATE] = &gspm0idle_gate.common.hw,
+ },
+ .num = CLK_DISP_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_disp_gate_desc = {
+ .clk_clks = sc9860_disp_gate,
+ .num_clk_clks = ARRAY_SIZE(sc9860_disp_gate),
+ .hw_clks = &sc9860_disp_gate_hws,
+};
+
+static SPRD_SC_GATE_CLK(sim0_eb, "sim0-eb", "ap-apb", 0x0,
+ 0x1000, BIT(0), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(iis0_eb, "iis0-eb", "ap-apb", 0x0,
+ 0x1000, BIT(1), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(iis1_eb, "iis1-eb", "ap-apb", 0x0,
+ 0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(iis2_eb, "iis2-eb", "ap-apb", 0x0,
+ 0x1000, BIT(3), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(iis3_eb, "iis3-eb", "ap-apb", 0x0,
+ 0x1000, BIT(4), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(spi0_eb, "spi0-eb", "ap-apb", 0x0,
+ 0x1000, BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(spi1_eb, "spi1-eb", "ap-apb", 0x0,
+ 0x1000, BIT(6), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(spi2_eb, "spi2-eb", "ap-apb", 0x0,
+ 0x1000, BIT(7), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c0_eb, "i2c0-eb", "ap-apb", 0x0,
+ 0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c1_eb, "i2c1-eb", "ap-apb", 0x0,
+ 0x1000, BIT(9), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c2_eb, "i2c2-eb", "ap-apb", 0x0,
+ 0x1000, BIT(10), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c3_eb, "i2c3-eb", "ap-apb", 0x0,
+ 0x1000, BIT(11), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c4_eb, "i2c4-eb", "ap-apb", 0x0,
+ 0x1000, BIT(12), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c5_eb, "i2c5-eb", "ap-apb", 0x0,
+ 0x1000, BIT(13), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(uart0_eb, "uart0-eb", "ap-apb", 0x0,
+ 0x1000, BIT(14), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(uart1_eb, "uart1-eb", "ap-apb", 0x0,
+ 0x1000, BIT(15), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(uart2_eb, "uart2-eb", "ap-apb", 0x0,
+ 0x1000, BIT(16), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(uart3_eb, "uart3-eb", "ap-apb", 0x0,
+ 0x1000, BIT(17), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(uart4_eb, "uart4-eb", "ap-apb", 0x0,
+ 0x1000, BIT(18), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_ckg_eb, "ap-ckg-eb", "ap-apb", 0x0,
+ 0x1000, BIT(19), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(spi3_eb, "spi3-eb", "ap-apb", 0x0,
+ 0x1000, BIT(20), CLK_IGNORE_UNUSED, 0);
+
+static struct sprd_clk_common *sc9860_apapb_gate[] = {
+ /* address base is 0x70b00000 */
+ &sim0_eb.common,
+ &iis0_eb.common,
+ &iis1_eb.common,
+ &iis2_eb.common,
+ &iis3_eb.common,
+ &spi0_eb.common,
+ &spi1_eb.common,
+ &spi2_eb.common,
+ &i2c0_eb.common,
+ &i2c1_eb.common,
+ &i2c2_eb.common,
+ &i2c3_eb.common,
+ &i2c4_eb.common,
+ &i2c5_eb.common,
+ &uart0_eb.common,
+ &uart1_eb.common,
+ &uart2_eb.common,
+ &uart3_eb.common,
+ &uart4_eb.common,
+ &ap_ckg_eb.common,
+ &spi3_eb.common,
+};
+
+static struct clk_hw_onecell_data sc9860_apapb_gate_hws = {
+ .hws = {
+ [CLK_SIM0_EB] = &sim0_eb.common.hw,
+ [CLK_IIS0_EB] = &iis0_eb.common.hw,
+ [CLK_IIS1_EB] = &iis1_eb.common.hw,
+ [CLK_IIS2_EB] = &iis2_eb.common.hw,
+ [CLK_IIS3_EB] = &iis3_eb.common.hw,
+ [CLK_SPI0_EB] = &spi0_eb.common.hw,
+ [CLK_SPI1_EB] = &spi1_eb.common.hw,
+ [CLK_SPI2_EB] = &spi2_eb.common.hw,
+ [CLK_I2C0_EB] = &i2c0_eb.common.hw,
+ [CLK_I2C1_EB] = &i2c1_eb.common.hw,
+ [CLK_I2C2_EB] = &i2c2_eb.common.hw,
+ [CLK_I2C3_EB] = &i2c3_eb.common.hw,
+ [CLK_I2C4_EB] = &i2c4_eb.common.hw,
+ [CLK_I2C5_EB] = &i2c5_eb.common.hw,
+ [CLK_UART0_EB] = &uart0_eb.common.hw,
+ [CLK_UART1_EB] = &uart1_eb.common.hw,
+ [CLK_UART2_EB] = &uart2_eb.common.hw,
+ [CLK_UART3_EB] = &uart3_eb.common.hw,
+ [CLK_UART4_EB] = &uart4_eb.common.hw,
+ [CLK_AP_CKG_EB] = &ap_ckg_eb.common.hw,
+ [CLK_SPI3_EB] = &spi3_eb.common.hw,
+ },
+ .num = CLK_APAPB_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_apapb_gate_desc = {
+ .clk_clks = sc9860_apapb_gate,
+ .num_clk_clks = ARRAY_SIZE(sc9860_apapb_gate),
+ .hw_clks = &sc9860_apapb_gate_hws,
+};
+
+static const struct of_device_id sprd_sc9860_clk_ids[] = {
+ { .compatible = "sprd,sc9860-pmu-gate", /* 0x402b */
+ .data = &sc9860_pmu_gate_desc },
+ { .compatible = "sprd,sc9860-pll", /* 0x4040 */
+ .data = &sc9860_pll_desc },
+ { .compatible = "sprd,sc9860-ap-clk", /* 0x2000 */
+ .data = &sc9860_ap_clk_desc },
+ { .compatible = "sprd,sc9860-aon-prediv", /* 0x402d */
+ .data = &sc9860_aon_prediv_desc },
+ { .compatible = "sprd,sc9860-apahb-gate", /* 0x2021 */
+ .data = &sc9860_apahb_gate_desc },
+ { .compatible = "sprd,sc9860-aon-gate", /* 0x402e */
+ .data = &sc9860_aon_gate_desc },
+ { .compatible = "sprd,sc9860-aonsecure-clk", /* 0x4088 */
+ .data = &sc9860_aonsecure_clk_desc },
+ { .compatible = "sprd,sc9860-agcp-gate", /* 0x415e */
+ .data = &sc9860_agcp_gate_desc },
+ { .compatible = "sprd,sc9860-gpu-clk", /* 0x6020 */
+ .data = &sc9860_gpu_clk_desc },
+ { .compatible = "sprd,sc9860-vsp-clk", /* 0x6100 */
+ .data = &sc9860_vsp_clk_desc },
+ { .compatible = "sprd,sc9860-vsp-gate", /* 0x6110 */
+ .data = &sc9860_vsp_gate_desc },
+ { .compatible = "sprd,sc9860-cam-clk", /* 0x6200 */
+ .data = &sc9860_cam_clk_desc },
+ { .compatible = "sprd,sc9860-cam-gate", /* 0x6210 */
+ .data = &sc9860_cam_gate_desc },
+ { .compatible = "sprd,sc9860-disp-clk", /* 0x6300 */
+ .data = &sc9860_disp_clk_desc },
+ { .compatible = "sprd,sc9860-disp-gate", /* 0x6310 */
+ .data = &sc9860_disp_gate_desc },
+ { .compatible = "sprd,sc9860-apapb-gate", /* 0x70b0 */
+ .data = &sc9860_apapb_gate_desc },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sprd_sc9860_clk_ids);
+
+static int sc9860_clk_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ const struct of_device_id *match;
+ const struct sprd_clk_desc *desc;
+
+ match = of_match_node(sprd_sc9860_clk_ids, pdev->dev.of_node);
+ if (!match) {
+ pr_err("%s: of_match_node() failed.", __func__);
+ return -ENODEV;
+ }
+
+ desc = match->data;
+ sprd_clk_regmap_init(pdev, desc);
+
+ ret = sprd_clk_probe(pdev->dev.of_node, desc->hw_clks);
+ if (ret == 0)
+ pr_info("%s: %u clocks have been registered now.\n",
+ match->compatible, desc->hw_clks->num);
+
+ return ret;
+}
+
+static struct platform_driver sc9860_clk_driver = {
+ .probe = sc9860_clk_probe,
+ .driver = {
+ .name = "sc9860-clk",
+ .of_match_table = sprd_sc9860_clk_ids,
+ },
+};
+module_platform_driver(sc9860_clk_driver);
+
+MODULE_DESCRIPTION("Spreadtrum SC9860 Clock Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sc9860-clk");
--
2.7.4
^ permalink raw reply related
* [PATCH V5 11/12] arm64: dts: add syscon for whale2 platform
From: Chunyan Zhang @ 2017-11-20 6:01 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette, Rob Herring, Mark Rutland
Cc: Catalin Marinas, Will Deacon, linux-clk, linux-kernel, devicetree,
linux-arm-kernel, Arnd Bergmann, Mark Brown, Xiaolong Zhang,
Ben Li, Orson Zhai, Chunyan Zhang
In-Reply-To: <20171120060137.27380-1-chunyan.zhang@spreadtrum.com>
Some clocks on SC9860 are in the same address area with syscon
devices, the proper syscon node will be quoted under the
definitions of those clocks in DT.
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
arch/arm64/boot/dts/sprd/whale2.dtsi | 46 +++++++++++++++++++++++++++++++++++-
1 file changed, 45 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
index 7c217c5..6ea3a75 100644
--- a/arch/arm64/boot/dts/sprd/whale2.dtsi
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -17,6 +17,51 @@
#size-cells = <2>;
ranges;
+ ap_ahb_regs: syscon@20210000 {
+ compatible = "syscon";
+ reg = <0 0x20210000 0 0x10000>;
+ };
+
+ pmu_regs: syscon@402b0000 {
+ compatible = "syscon";
+ reg = <0 0x402b0000 0 0x10000>;
+ };
+
+ aon_regs: syscon@402e0000 {
+ compatible = "syscon";
+ reg = <0 0x402e0000 0 0x10000>;
+ };
+
+ ana_regs: syscon@40400000 {
+ compatible = "syscon";
+ reg = <0 0x40400000 0 0x10000>;
+ };
+
+ agcp_regs: syscon@415e0000 {
+ compatible = "syscon";
+ reg = <0 0x415e0000 0 0x1000000>;
+ };
+
+ vsp_regs: syscon@61100000 {
+ compatible = "syscon";
+ reg = <0 0x61100000 0 0x10000>;
+ };
+
+ cam_regs: syscon@62100000 {
+ compatible = "syscon";
+ reg = <0 0x62100000 0 0x10000>;
+ };
+
+ disp_regs: syscon@63100000 {
+ compatible = "syscon";
+ reg = <0 0x63100000 0 0x10000>;
+ };
+
+ ap_apb_regs: syscon@70b00000 {
+ compatible = "syscon";
+ reg = <0 0x70b00000 0 0x40000>;
+ };
+
ap-apb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -59,7 +104,6 @@
status = "disabled";
};
};
-
};
ext_26m: ext-26m {
--
2.7.4
^ permalink raw reply related
* [PATCH V5 12/12] arm64: dts: add clocks for SC9860
From: Chunyan Zhang @ 2017-11-20 6:01 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette, Rob Herring, Mark Rutland
Cc: Catalin Marinas, Will Deacon, linux-clk, linux-kernel, devicetree,
linux-arm-kernel, Arnd Bergmann, Mark Brown, Xiaolong Zhang,
Ben Li, Orson Zhai, Chunyan Zhang
In-Reply-To: <20171120060137.27380-1-chunyan.zhang@spreadtrum.com>
Some clocks on SC9860 are in the same address area with syscon devices,
those are what have a property of 'sprd,syscon' which would refer to
syscon devices, others would have a reg property indicated their address
ranges.
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
arch/arm64/boot/dts/sprd/sc9860.dtsi | 115 +++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/sprd/whale2.dtsi | 2 +-
2 files changed, 116 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
index 7b7d8ce..bf03da4 100644
--- a/arch/arm64/boot/dts/sprd/sc9860.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
@@ -7,6 +7,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sprd,sc9860-clk.h>
#include "whale2.dtsi"
/ {
@@ -183,6 +184,120 @@
};
soc {
+ pmu_gate: pmu-gate {
+ compatible = "sprd,sc9860-pmu-gate";
+ sprd,syscon = <&pmu_regs>; /* 0x402b0000 */
+ clocks = <&ext_26m>;
+ #clock-cells = <1>;
+ };
+
+ pll: pll {
+ compatible = "sprd,sc9860-pll";
+ sprd,syscon = <&ana_regs>; /* 0x40400000 */
+ clocks = <&pmu_gate 0>;
+ #clock-cells = <1>;
+ };
+
+ ap_clk: clock-controller@20000000 {
+ compatible = "sprd,sc9860-ap-clk";
+ reg = <0 0x20000000 0 0x400>;
+ clocks = <&ext_26m>, <&pll 0>,
+ <&pmu_gate 0>;
+ #clock-cells = <1>;
+ };
+
+ aon_prediv: aon-prediv {
+ compatible = "sprd,sc9860-aon-prediv";
+ reg = <0 0x402d0000 0 0x400>;
+ clocks = <&ext_26m>, <&pll 0>,
+ <&pmu_gate 0>;
+ #clock-cells = <1>;
+ };
+
+ apahb_gate: apahb-gate {
+ compatible = "sprd,sc9860-apahb-gate";
+ sprd,syscon = <&ap_ahb_regs>; /* 0x20210000 */
+ clocks = <&aon_prediv 0>;
+ #clock-cells = <1>;
+ };
+
+ aon_gate: aon-gate {
+ compatible = "sprd,sc9860-aon-gate";
+ sprd,syscon = <&aon_regs>; /* 0x402e0000 */
+ clocks = <&aon_prediv 0>;
+ #clock-cells = <1>;
+ };
+
+ aonsecure_clk: clock-controller@40880000 {
+ compatible = "sprd,sc9860-aonsecure-clk";
+ reg = <0 0x40880000 0 0x400>;
+ clocks = <&ext_26m>, <&pll 0>;
+ #clock-cells = <1>;
+ };
+
+ agcp_gate: agcp-gate {
+ compatible = "sprd,sc9860-agcp-gate";
+ sprd,syscon = <&agcp_regs>; /* 0x415e0000 */
+ clocks = <&aon_prediv 0>;
+ #clock-cells = <1>;
+ };
+
+ gpu_clk: clock-controller@60200000 {
+ compatible = "sprd,sc9860-gpu-clk";
+ reg = <0 0x60200000 0 0x400>;
+ clocks = <&pll 0>;
+ #clock-cells = <1>;
+ };
+
+ vsp_clk: clock-controller@61000000 {
+ compatible = "sprd,sc9860-vsp-clk";
+ reg = <0 0x61000000 0 0x400>;
+ clocks = <&ext_26m>, <&pll 0>;
+ #clock-cells = <1>;
+ };
+
+ vsp_gate: vsp-gate {
+ compatible = "sprd,sc9860-vsp-gate";
+ sprd,syscon = <&vsp_regs>; /* 0x61100000 */
+ clocks = <&vsp_clk 0>;
+ #clock-cells = <1>;
+ };
+
+ cam_clk: clock-controller@62000000 {
+ compatible = "sprd,sc9860-cam-clk";
+ reg = <0 0x62000000 0 0x4000>;
+ clocks = <&ext_26m>, <&pll 0>;
+ #clock-cells = <1>;
+ };
+
+ cam_gate: cam-gate {
+ compatible = "sprd,sc9860-cam-gate";
+ sprd,syscon = <&cam_regs>; /* 0x62100000 */
+ clocks = <&cam_clk 0>;
+ #clock-cells = <1>;
+ };
+
+ disp_clk: clock-controller@63000000 {
+ compatible = "sprd,sc9860-disp-clk";
+ reg = <0 0x63000000 0 0x400>;
+ clocks = <&ext_26m>, <&pll 0>;
+ #clock-cells = <1>;
+ };
+
+ disp_gate: disp-gate {
+ compatible = "sprd,sc9860-disp-gate";
+ sprd,syscon = <&disp_regs>; /* 0x63100000 */
+ clocks = <&disp_clk 0>;
+ #clock-cells = <1>;
+ };
+
+ apapb_gate: apapb-gate {
+ compatible = "sprd,sc9860-apapb-gate";
+ sprd,syscon = <&ap_apb_regs>; /* 0x70b00000 */
+ clocks = <&ap_clk 0>;
+ #clock-cells = <1>;
+ };
+
funnel@10001000 { /* SoC Funnel */
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0x10001000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
index 6ea3a75..eb004bb 100644
--- a/arch/arm64/boot/dts/sprd/whale2.dtsi
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -110,6 +110,6 @@
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
- clock-output-names = "ext_26m";
+ clock-output-names = "ext-26m";
};
};
--
2.7.4
^ permalink raw reply related
* Re: [PATCH v7 06/13] slimbus: Add messaging APIs to slimbus framework
From: Srinivas Kandagatla @ 2017-11-20 6:47 UTC (permalink / raw)
To: Vinod Koul
Cc: gregkh, broonie, alsa-devel, sdharia, bp, poeschel, treding,
andreas.noever, alan, mathieu.poirier, daniel, jkosina,
sharon.dvir1, joe, davem, james.hogan, michael.opdenacker,
robh+dt, pawel.moll, mark.rutland, devicetree, linux-kernel,
linux-arm-msm, arnd
In-Reply-To: <20171117074834.GM3187@localhost>
thanks for the comments,
On 17/11/17 07:48, Vinod Koul wrote:
> On Wed, Nov 15, 2017 at 02:10:36PM +0000, srinivas.kandagatla@linaro.org wrote:
>
>> +void slim_msg_response(struct slim_controller *ctrl, u8 *reply, u8 tid, u8 len)
>> +{
>> + struct slim_msg_txn *txn;
>> + struct slim_val_inf *msg;
>> + unsigned long flags;
>> +
>> + spin_lock_irqsave(&ctrl->txn_lock, flags);
>
> Do you need this to be a _irqsave variant? What is the context of io
> transfers in this case
Yes, On Qcom controller driver it is called in Interrupt context, but it
depends on caller (controller driver) which could be in process context too.
>
>> +/**
>> + * slim_do_transfer() - Process a slimbus-messaging transaction
>> + *
>> + * @ctrl: Controller handle
>> + * @txn: Transaction to be sent over SLIMbus
>> + *
>> + * Called by controller to transmit messaging transactions not dealing with
>> + * Interface/Value elements. (e.g. transmittting a message to assign logical
>> + * address to a slave device
>> + *
>> + * Return: -ETIMEDOUT: If transmission of this message timed out
>> + * (e.g. due to bus lines not being clocked or driven by controller)
>> + * -ENOTCONN: If the transmitted message was not ACKed by destination
>> + * device.
>
> I am preferring ENODATA in SDW for this case, as Slaves didnt respond or
> ACK.
Isn't that a timeout error then.
ENODATA is for "No data available", reporting ENODATA would be misleading.
>
> ENOTCONN is defined as /* Transport endpoint is not connected */ which is
> not the case here, connected yes but not responded.
Code as it is would not return this, so i will be deleting ENOTCONN from
kernel doc.
>
>> +static int slim_val_inf_sanity(struct slim_controller *ctrl,
>> + struct slim_val_inf *msg, u8 mc)
>> +{
>> + if (!msg || msg->num_bytes > 16 ||
>> + (msg->start_offset + msg->num_bytes) > 0xC00)
>> + goto reterr;
>> + switch (mc) {
>> + case SLIM_MSG_MC_REQUEST_VALUE:
>> + case SLIM_MSG_MC_REQUEST_INFORMATION:
>> + if (msg->rbuf != NULL)
>> + return 0;
>> + break;
>
> empty line here and after each break make it look better
Yep, will remove this in next version.
>
>> + case SLIM_MSG_MC_CHANGE_VALUE:
>> + case SLIM_MSG_MC_CLEAR_INFORMATION:
>> + if (msg->wbuf != NULL)
>> + return 0;
>> + break;
>> + case SLIM_MSG_MC_REQUEST_CHANGE_VALUE:
>> + case SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION:
>> + if (msg->rbuf != NULL && msg->wbuf != NULL)
>> + return 0;
>> + break;
>> + default:
>> + break;
>
> this seems superflous and we can just fall thru to error below.
>
Agree..
will fix it in next version.
>> + }
>> +reterr:
>> + dev_err(ctrl->dev, "Sanity check failed:msg:offset:0x%x, mc:%d\n",
>> + msg->start_offset, mc);
>> + return -EINVAL;
>
> ...
>
>> +static int slim_xfer_msg(struct slim_controller *ctrl,
>> + struct slim_device *sbdev,
>> + struct slim_val_inf *msg, u8 mc)
>> +{
>> + DEFINE_SLIM_LDEST_TXN(txn_stack, mc, 6, sbdev->laddr, msg);
>> + struct slim_msg_txn *txn = &txn_stack;
>> + int ret;
>> + u16 sl;
>> +
>> + ret = slim_val_inf_sanity(ctrl, msg, mc);
>> + if (ret)
>> + return ret;
>> +
>> + sl = slim_slicesize(msg->num_bytes);
>> +
>> + dev_dbg(ctrl->dev, "SB xfer msg:os:%x, len:%d, MC:%x, sl:%x\n",
>> + msg->start_offset, msg->num_bytes, mc, sl);
>
> better to add tracing support for these debug prints
>
Will explore tracing side of it..
>> +
>> + txn->ec = ((sl | (1 << 3)) | ((msg->start_offset & 0xFFF) << 4));
>> +
>> + switch (mc) {
>> + case SLIM_MSG_MC_REQUEST_CHANGE_VALUE:
>> + case SLIM_MSG_MC_CHANGE_VALUE:
>> + case SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION:
>> +int slim_request_change_val_element(struct slim_device *sb,
>> + struct slim_val_inf *msg)
>> +{
>> + struct slim_controller *ctrl = sb->ctrl;
>> +
>> + if (!ctrl)
>> + return -EINVAL;
>> +
>> + return slim_xfer_msg(ctrl, sb, msg, SLIM_MSG_MC_REQUEST_CHANGE_VALUE);
>> +}
>> +EXPORT_SYMBOL_GPL(slim_request_change_val_element);
>
> looking at this, does it really help to have different APIs for SLIM_MSG_XXX
> why not slim_xfer_msg() be an exported one..
I did think about this cleanup, and it makes sense.
I will have a go at removing this and just leaving slim_readb/writeb()
slim_read/write() and slim_xfer_msg() API's in next version.
We can discuss to add this in future incase its required.
>
>> +int slim_write(struct slim_device *sdev, u32 addr, size_t count, u8 *val)
>> +{
>> + struct slim_val_inf msg;
>> + int ret;
>> +
>> + slim_fill_msg(&msg, addr, count, val, NULL);
>> + ret = slim_change_val_element(sdev, &msg);
>
> return slim_change_val_element()
Makes sense.
>
>> +
>> + return ret;
>> +
>> +}
>
> ...
>
>> +/* Destination type Values */
>> +#define SLIM_MSG_DEST_LOGICALADDR 0
>> +#define SLIM_MSG_DEST_ENUMADDR 1
>> +#define SLIM_MSG_DEST_BROADCAST 3
> ^^^
> why tab here
Will fix it in next version.
>
>
^ permalink raw reply
* Re: [PATCH v7 04/13] slimbus: core: Add slim controllers support
From: Srinivas Kandagatla @ 2017-11-20 6:47 UTC (permalink / raw)
To: Greg KH, Vinod Koul
Cc: broonie, alsa-devel, sdharia, bp, poeschel, treding,
andreas.noever, alan, mathieu.poirier, daniel, jkosina,
sharon.dvir1, joe, davem, james.hogan, michael.opdenacker,
robh+dt, pawel.moll, mark.rutland, devicetree, linux-kernel,
linux-arm-msm, arnd
In-Reply-To: <20171117081322.GF10671@kroah.com>
On 17/11/17 08:13, Greg KH wrote:
> On Fri, Nov 17, 2017 at 10:12:22AM +0530, Vinod Koul wrote:
>> On Thu, Nov 16, 2017 at 05:29:35PM +0000, Srinivas Kandagatla wrote:
>>> thanks for the comments.
>>>
>>>
>>> On 16/11/17 16:42, Vinod Koul wrote:
>>>> On Wed, Nov 15, 2017 at 02:10:34PM +0000,srinivas.kandagatla@linaro.org wrote:
>>>>
>>>>> +static void slim_dev_release(struct device *dev)
>>>>> +{
>>>>> + struct slim_device *sbdev = to_slim_device(dev);
>>>>> +
>>>>> + put_device(sbdev->ctrl->dev);
>>>> which device would that be?
>>> This is controller device
>>>
>>>>> +static int slim_add_device(struct slim_controller *ctrl,
>>>>> + struct slim_device *sbdev,
>>>>> + struct device_node *node)
>>>>> +{
>>>>> + sbdev->dev.bus = &slimbus_bus;
>>>>> + sbdev->dev.parent = ctrl->dev;
>>>>> + sbdev->dev.release = slim_dev_release;
>>>>> + sbdev->dev.driver = NULL;
>>>>> + sbdev->ctrl = ctrl;
>>>>> +
>>>>> + dev_set_name(&sbdev->dev, "%x:%x:%x:%x",
>>>>> + sbdev->e_addr.manf_id,
>>>>> + sbdev->e_addr.prod_code,
>>>>> + sbdev->e_addr.dev_index,
>>>>> + sbdev->e_addr.instance);
>>>>> +
>>>>> + get_device(ctrl->dev);
>>>> is this controller device and you ensuring it doesnt go away while you have
>>>> slaves on it?
>>> Yes.
>> I thought since you are marking ctrl->dev as parent, the device core should
>> ensure that parent doesn't go off when you have child device?
>>
>> Greg, is that understanding correct, if so we may not need these calls.
> That understanding should be correct, as the reference count is
> incremented on the parent when a child is added.
>
> It would be trivial for this to be tested, and yes, I am pretty sure you
> don't need this call.
>
Thanks for suggestion, I will remove this in next version.
thanks,
srini
^ permalink raw reply
* [PATCH v3] mfd: syscon: Add hardware spinlock support
From: Baolin Wang @ 2017-11-20 6:54 UTC (permalink / raw)
To: lee.jones-QSEj5FYQhm4dnm+yROfE0A, arnd-r2nGTMty4D4,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8
Cc: broonie-DgEjT+Ai2ygdnm+yROfE0A,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
baolin.wang-QSEj5FYQhm4dnm+yROfE0A
Some system control registers need hardware spinlock to synchronize
between the multiple subsystems, so we should add hardware spinlock
support for syscon.
Signed-off-by: Baolin Wang <baolin.wang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
Changes since v2:
- Add acked tag from Rob.
Changes since v1:
- Remove timeout configuration.
- Modify the binding file to add hwlocks.
Note: The hwspinlock support in regmap was merged by commit:
(8698b9364710: "regmap: Add hardware spinlock support")
The hwspinlock was changed to a bool by commit:
(d048236dfdfe: "hwspinlock: Change hwspinlock to a bool")
---
Documentation/devicetree/bindings/mfd/syscon.txt | 1 +
drivers/mfd/syscon.c | 7 +++++++
2 files changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt
index 8b92d45..f464cc8 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.txt
+++ b/Documentation/devicetree/bindings/mfd/syscon.txt
@@ -16,6 +16,7 @@ Required properties:
Optional property:
- reg-io-width: the size (in bytes) of the IO accesses that should be
performed on the device.
+- hwlocks: reference to a phandle of a hardware spinlock provider node.
Examples:
gpr: iomuxc-gpr@20e0000 {
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index b93fe4c..f1dccce 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -13,6 +13,7 @@
*/
#include <linux/err.h>
+#include <linux/hwspinlock.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/list.h>
@@ -87,6 +88,12 @@ static struct syscon *of_syscon_register(struct device_node *np)
if (ret)
reg_io_width = 4;
+ ret = of_hwspin_lock_get_id(np, 0);
+ if (ret > 0) {
+ syscon_config.hwlock_id = ret;
+ syscon_config.hwlock_mode = HWLOCK_IRQSTATE;
+ }
+
syscon_config.reg_stride = reg_io_width;
syscon_config.val_bits = reg_io_width * 8;
syscon_config.max_register = resource_size(&res) - reg_io_width;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* Re: [patches] Re: [PATCH v9 03/12] dt-bindings: RISC-V CPU Bindings
From: Jonathan Neuschäfer @ 2017-11-20 7:35 UTC (permalink / raw)
To: patches-q3qR2WxjNRFS9aJRtSZj7A
Cc: Palmer Dabbelt, Arnd Bergmann, sfr-3FnU+UHB4dNDw9hX6IcOSA,
Olof Johansson, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, albert-SpMDHPYPyPbQT0dZR+AlfA,
yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A, mmarek-IBi9RG/b67k,
will.deacon-5wv7dgnIgG8, peterz-wEGCiKHe2LqWVfeAwA7xHQ,
boqun.feng-Re5JQEeQqe8AvxtiuMwx3w, oleg-H+wXaHxf7aLQT0dZR+AlfA,
mingo-H+wXaHxf7aLQT0dZR+AlfA, devicetree-u79uwXL29TY76Z2rM5mHXA,
ron minnich
In-Reply-To: <20171005101633.GA4929@leverpostej>
[-- Attachment #1: Type: text/plain, Size: 1154 bytes --]
Hi Palmer,
On Thu, Oct 05, 2017 at 11:16:33AM +0100, Mark Rutland wrote:
[...]
> I would *strongly* recommend that from day one, you determine the SMP
> bringup mechanism via an enable-method property, and document the
> contract with FW/bootloader somewhere in the kernel tree.
Somewhat, but not quite related: Please consider making the availability
of the Supervisor Binary Interface explicit in the devicetree.
I understand that the general plan is to make the SBI a mandatory
feature of every RISC-V system capable of running Linux, but I do want
to explore the possibility of running without run-time resident firmware
at some point in the future. Thus it would be nice if the devicetree
would indicate the presence of the SBI from the start, to avoid having
to invent a way to express its *absence* later on.
It could look something like this (modelled after qcom,scm):
/ {
firmware {
sbi {
compatible = "riscv,sbi";
};
};
};
This topic may warrant some discussion, because other people may have
different opinions, and there hasn't been a discussion about it, AFAICS.
Thanks,
Jonathan Neuschäfer
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply
* Re: [PATCH] arm64: dts: renesas: ulcb-kf: add pfc node for USB3.0 channel 0
From: Vladimir Barinov @ 2017-11-20 8:08 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland,
Catalin Marinas, Will Deacon, devicetree@vger.kernel.org,
Linux-Renesas
In-Reply-To: <CAMuHMdX+7cHF4ZWBkZ8jQzhuycKYGNdFuZK5Ge9e9coX9pUKcQ@mail.gmail.com>
Hi Geert,
Thank you for valuable review.
On 15.11.2017 19:49, Geert Uytterhoeven wrote:
> Hi Vladimir,
>
> On Wed, Nov 8, 2017 at 2:06 PM, Vladimir Barinov
> <vladimir.barinov@cogentembedded.com> wrote:
>> Adds the pfc node for USB3.0 channel 0.
>>
>> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
>> ---
>> arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 8 ++++++++
>> 1 file changed, 8 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
>> index 48a2e8f..2ecb6ac 100644
>> --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
>> +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
>> @@ -173,6 +173,11 @@
>> groups = "usb0";
>> function = "usb0";
>> };
>> +
>> + usb30_pins: usb30 {
>> + groups = "usb30";
>> + function = "usb30";
> This enabled USB30_PWEN and USB30_OVC.
>
> However, these pins are routed via CN1A pins A97/A98 to HDMI_CS_A
> and HDMI_CS_B, not to a USB PHY?
>
> USB30_PWEN of the real USB PHY is provided by the i2c GPIO
> expander U11.
>
> I'm a bit puzzled by this... What am I missing?
This is my fault.
(Seems I've been looking for older KF schematic).
Please ignore this patch.
>
>> + };
>> };
>>
>> &scif1 {
>> @@ -191,5 +196,8 @@
>> };
>>
>> &xhci0 {
>> + pinctrl-0 = <&usb30_pins>;
>> + pinctrl-names = "default";
>> +
>> status = "okay";
>> };
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
--
Regards,
Vladimir
^ permalink raw reply
* Re: [PATCH] ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen
From: Roger Quadros @ 2017-11-20 8:44 UTC (permalink / raw)
To: Tony Lindgren, linux-omap-u79uwXL29TY76Z2rM5mHXA
Cc: Benoît Cousson, devicetree-u79uwXL29TY76Z2rM5mHXA,
Dave Gerlach, Nishanth Menon, Marc Zyngier, Sebastian Reichel,
Tero Kristo
In-Reply-To: <20171117165658.21003-1-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
On 17/11/17 18:56, Tony Lindgren wrote:
> There's been a reproducable USB OHCI/EHCI cpuidle related hang on omap4
> for a while that happens after about 20 - 40 minutes on an idle system
> with some data feeding device being connected, like a USB GPS device or
> a cellular modem.
>
> This issue happens in cpuidle states C2 and C3 and does not happen if
> cpuidle is limited to C1 state only. The symptoms are that the whole
> system hangs and never wakes up from idle, and if a watchdog is
> configured the system reboots after a while.
>
> Turns out that OHCI/EHCI devices on omap4 are trying to use the GIC
> interrupt controller directly as a parent instead of the WUGEN. We
> need to pass the interrupts through WUGEN to GIC to provide the wakeup
> events for the processor.
>
> Let's fix the issue by removing the gic interrupt-parent and use the
> default interrupt-parent wakeupgen instead. Note that omap5.dtsi had
> this already fixes earlier by commit 7136d457f365 ("ARM: omap: convert
> wakeupgen to stacked domains") but we somehow missed omap4 at that
> point.
>
> Fixes: 7136d457f365 ("ARM: omap: convert wakeupgen to stacked domains")
> Cc: Dave Gerlach <d-gerlach-l0cyMroinI0@public.gmane.org>
> Cc: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
> Cc: Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org>
> Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> Cc: Sebastian Reichel <sebastian.reichel-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Reviewed-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> ---
> arch/arm/boot/dts/omap4.dtsi | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -1081,14 +1081,12 @@
> usbhsohci: ohci@4a064800 {
> compatible = "ti,ohci-omap3";
> reg = <0x4a064800 0x400>;
> - interrupt-parent = <&gic>;
> interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> usbhsehci: ehci@4a064c00 {
> compatible = "ti,ehci-omap";
> reg = <0x4a064c00 0x400>;
> - interrupt-parent = <&gic>;
> interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
> };
> };
>
--
cheers,
-roger
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v2] dt-bindings: mtd: Add sst25vf016b to the list of supported chip names
From: Geert Uytterhoeven @ 2017-11-20 8:49 UTC (permalink / raw)
To: Cyrille Pitchen
Cc: Fabrizio Castro, David Woodhouse, Brian Norris, Boris Brezillon,
Marek Vasut, Richard Weinberger, Rob Herring, Mark Rutland,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Chris Paterson,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Biju Das,
MTD Maling List
In-Reply-To: <658ceb2b-5d2b-9349-f140-27858459e5a8-yU5RGvR974pGWvitb5QawA@public.gmane.org>
Hi Cyrille,
On Fri, Nov 17, 2017 at 6:36 PM, Cyrille Pitchen
<cyrille.pitchen-yU5RGvR974pGWvitb5QawA@public.gmane.org> wrote:
> sorry but I won't apply this patch.
>
> New values for the 'compatible' DT properties should only be added for
> memory parts not supporting the JEDEC READ ID (0x9F) command.
I tent to disagree. Documenting part numbers in the DT bindings serves two
purposes:
1. Documenting which parts are supported,
2. Allowing checkpatch to validate compatible values in DTS files (see
below).
Unfortunately the current
Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
is useless for the latter, as the values listed don't contain the vendor
prefixes, still causing warnings like
WARNING: DT compatible string "sst,sst25vf016b" appears un-documented
-- check ./Documentation/devicetree/bindings/
#79: FILE: arch/arm/boot/dts/r8a7743-iwg20m.dtsi:79:
+ compatible = "sst,sst25vf016b", "jedec,spi-nor";
So I suggest prepending all part number with the appropriate vendor prefixes
in jedec,spi-nor.txt.
BTW, "sst" (for Silicon Storage Technology) should be added to
Documentation/devicetree/bindings/vendor-prefixes.txt, too, to avoid another
warning:
WARNING: DT compatible string vendor "sst" appears un-documented --
check ./Documentation/devicetree/bindings/vendor-prefixes.txt
#79: FILE: arch/arm/boot/dts/r8a7743-iwg20m.dtsi:79:
+ compatible = "sst,sst25vf016b", "jedec,spi-nor";
> SST25 memories do support this command hence should use the "jedec,spi-nor"
> value alone. For historical reasons, some DT nodes set their 'compatible'
> string to something like "<vendor>,<model>", "jedec,spi-nor".
> It should work as expected in most case however I discourage from doing so
> in new device trees because it may have some side effects especially when
> the m25p80.c driver is used between the spi-nor.c driver and the SPI
> controller driver.
It is considered good practice to always have in DT a compatible value for
the real part number, not just for a generic fallback.
This allows to discriminate using the real part number, in case an anomaly
shows up later.
How else are you gonna handle e.g. a production batch that accidentally
contains a wrong JEDEC ID? And adding the part-specific compatible value
after the discovery won't help, as it won't be present in existing DTSes.
> It's all about setting the 2nd parameter of spi_nor_scan(), the 'name'
> parameter, as NULL when possible. This parameter should be set to a non NULL
> value only for memories not supporting the JEDEC READ ID op code (0x9F).
>
> Best regards,
>
> Cyrille
>
> Le 24/10/2017 à 15:50, Fabrizio Castro a écrit :
>> There are a few DT files that make use of sst25vf016b in their
>> compatible strings, and the driver supports this chip already.
>> This patch improves the documentation and therefore the result
>> of ./scripts/checkpatch.pl.
>>
>> Signed-off-by: Fabrizio Castro <fabrizio.castro-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org>
>> Signed-off-by: Chris Paterson <Chris.Paterson2-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
>> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
>> Acked-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
>> ---
>> Thank you Rob, thank you Geert, and sorry for the delay on this one.
>> Here is v2.
>>
>> Changes in v2:
>> * fixed subject prefix
>> * added changelog
>>
>> Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
>> index 4cab5d8..bf56d77 100644
>> --- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
>> +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
>> @@ -31,6 +31,7 @@ Required properties:
>> s25sl12801
>> s25fl008k
>> s25fl064k
>> + sst25vf016b
>> sst25vf040b
>> sst25wf040b
>> m25p40
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* RE: [PATCH 3/3] arm: dts: owl-s500: Add Sparky
From: sudeep kumar @ 2017-11-20 9:02 UTC (permalink / raw)
To: 'Andreas Färber', linux-arm-kernel
Cc: 'Mark Rutland', devicetree,
'张天益', '梅利',
linux-kernel, 'Thomas Liau', 'Russell King',
'Rob Herring', '张东风',
'刘炜', 'Ioan B', 'Jeff Chen'
In-Reply-To: <20171114180114.26408-4-afaerber@suse.de>
Acked-by : sudeep
-----Original Message-----
From: Andreas Färber [mailto:afaerber@suse.de]
Sent: Tuesday, November 14, 2017 11:31 PM
To: linux-arm-kernel@lists.infradead.org
Cc: Thomas Liau <thomas.liau@actions-semi.com>; Jeff Chen <jeff.chen@actions-semi.com>; 张东风 <zhangdf@actions-semi.com>; 刘炜 <liuwei@actions-semi.com>; 张天益 <tyzhang@actions-semi.com>; 梅利 <harrymei@actions-semi.com>; Ioan B <ioan@allo.com>; Sudeep Kumar <sudeepkumar@cem-solutions.net>; linux-kernel@vger.kernel.org; Andreas Färber <afaerber@suse.de>; Rob Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; Russell King <linux@armlinux.org.uk>; devicetree@vger.kernel.org
Subject: [PATCH 3/3] arm: dts: owl-s500: Add Sparky
Add a Device Tree for the Allo.com Sparky SBC.
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
arch/arm/boot/dts/Makefile | 3 ++-
arch/arm/boot/dts/owl-s500-sparky.dts | 44 +++++++++++++++++++++++++++++++++++
2 files changed, 46 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/owl-s500-sparky.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d0381e9caf21..ad77f7656a70 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -707,7 +707,8 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
orion5x-rd88f5182-nas.dtb
dtb-$(CONFIG_ARCH_ACTIONS) += \
owl-s500-cubieboard6.dtb \
- owl-s500-guitar-bb-rev-b.dtb
+ owl-s500-guitar-bb-rev-b.dtb \
+ owl-s500-sparky.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += \
prima2-evb.dtb
dtb-$(CONFIG_ARCH_OXNAS) += \
diff --git a/arch/arm/boot/dts/owl-s500-sparky.dts b/arch/arm/boot/dts/owl-s500-sparky.dts
new file mode 100644
index 000000000000..f620548c6c0b
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-sparky.dts
@@ -0,0 +1,44 @@
+/*
+ * Allo.com Sparky
+ *
+ * Copyright (c) 2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+/dts-v1/;
+
+#include "owl-s500.dtsi"
+
+/ {
+ compatible = "allo,sparky", "actions,s500";
+ model = "Allo.com Sparky";
+
+ aliases {
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial3:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1 or 2 GiB */
+ };
+
+ uart3_clk: uart3-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <921600>;
+ #clock-cells = <0>;
+ };
+};
+
+&timer {
+ clocks = <&hosc>;
+};
+
+&uart3 {
+ status = "okay";
+ clocks = <&uart3_clk>;
+};
--
2.13.6
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* RE: [PATCH v2] dt-bindings: mtd: Add sst25vf016b to the list of supported chip names
From: Fabrizio Castro @ 2017-11-20 9:43 UTC (permalink / raw)
To: Geert Uytterhoeven, Cyrille Pitchen
Cc: David Woodhouse, Brian Norris, Boris Brezillon, Marek Vasut,
Richard Weinberger, Rob Herring, Mark Rutland,
devicetree@vger.kernel.org, Chris Paterson,
linux-kernel@vger.kernel.org, Biju Das, MTD Maling List
In-Reply-To: <CAMuHMdWZ=71XvVyzsiPyiAz+0RsCZjmWqqvOKs=bDdSQMpLmnA@mail.gmail.com>
Dear All,
> Subject: Re: [PATCH v2] dt-bindings: mtd: Add sst25vf016b to the list of supported chip names
>
> Hi Cyrille,
>
> On Fri, Nov 17, 2017 at 6:36 PM, Cyrille Pitchen
> <cyrille.pitchen@wedev4u.fr> wrote:
> > sorry but I won't apply this patch.
> >
> > New values for the 'compatible' DT properties should only be added for
> > memory parts not supporting the JEDEC READ ID (0x9F) command.
>
> I tent to disagree. Documenting part numbers in the DT bindings serves two
> purposes:
> 1. Documenting which parts are supported,
> 2. Allowing checkpatch to validate compatible values in DTS files (see
> below).
that's precisely why we decided to submit the patch, thank you Geert!
>
> Unfortunately the current
> Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
> is useless for the latter, as the values listed don't contain the vendor
> prefixes, still causing warnings like
>
> WARNING: DT compatible string "sst,sst25vf016b" appears un-documented
> -- check ./Documentation/devicetree/bindings/
> #79: FILE: arch/arm/boot/dts/r8a7743-iwg20m.dtsi:79:
> + compatible = "sst,sst25vf016b", "jedec,spi-nor";
>
> So I suggest prepending all part number with the appropriate vendor prefixes
> in jedec,spi-nor.txt.
>
> BTW, "sst" (for Silicon Storage Technology) should be added to
> Documentation/devicetree/bindings/vendor-prefixes.txt, too, to avoid another
> warning:
>
> WARNING: DT compatible string vendor "sst" appears un-documented --
> check ./Documentation/devicetree/bindings/vendor-prefixes.txt
> #79: FILE: arch/arm/boot/dts/r8a7743-iwg20m.dtsi:79:
> + compatible = "sst,sst25vf016b", "jedec,spi-nor";
we did submit a patch to fix this ("of: add vendor prefix for Silicon Storage Technology Inc."):
https://patchwork.kernel.org/patch/9946889/
a while ago
>
> > SST25 memories do support this command hence should use the "jedec,spi-nor"
> > value alone. For historical reasons, some DT nodes set their 'compatible'
> > string to something like "<vendor>,<model>", "jedec,spi-nor".
> > It should work as expected in most case however I discourage from doing so
> > in new device trees because it may have some side effects especially when
> > the m25p80.c driver is used between the spi-nor.c driver and the SPI
> > controller driver.
>
> It is considered good practice to always have in DT a compatible value for
> the real part number, not just for a generic fallback.
> This allows to discriminate using the real part number, in case an anomaly
> shows up later.
> How else are you gonna handle e.g. a production batch that accidentally
> contains a wrong JEDEC ID? And adding the part-specific compatible value
> after the discovery won't help, as it won't be present in existing DTSes.
Totally agree with Geert.
Thanks,
Fab
>
> > It's all about setting the 2nd parameter of spi_nor_scan(), the 'name'
> > parameter, as NULL when possible. This parameter should be set to a non NULL
> > value only for memories not supporting the JEDEC READ ID op code (0x9F).
> >
> > Best regards,
> >
> > Cyrille
> >
> > Le 24/10/2017 à 15:50, Fabrizio Castro a écrit :
> >> There are a few DT files that make use of sst25vf016b in their
> >> compatible strings, and the driver supports this chip already.
> >> This patch improves the documentation and therefore the result
> >> of ./scripts/checkpatch.pl.
> >>
> >> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> >> Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>
> >> Acked-by: Rob Herring <robh@kernel.org>
> >> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
> >> ---
> >> Thank you Rob, thank you Geert, and sorry for the delay on this one.
> >> Here is v2.
> >>
> >> Changes in v2:
> >> * fixed subject prefix
> >> * added changelog
> >>
> >> Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt | 1 +
> >> 1 file changed, 1 insertion(+)
> >>
> >> diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-
> nor.txt
> >> index 4cab5d8..bf56d77 100644
> >> --- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
> >> +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
> >> @@ -31,6 +31,7 @@ Required properties:
> >> s25sl12801
> >> s25fl008k
> >> s25fl064k
> >> + sst25vf016b
> >> sst25vf040b
> >> sst25wf040b
> >> m25p40
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
^ permalink raw reply
* Re: [PATCH v2] arm64: dts: renesas: salvator-common: Add BD9571 PMIC
From: Simon Horman @ 2017-11-20 9:48 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Magnus Damm, linux-renesas-soc, devicetree, linux-arm-kernel
In-Reply-To: <1510839250-11199-1-git-send-email-geert+renesas@glider.be>
On Thu, Nov 16, 2017 at 02:34:10PM +0100, Geert Uytterhoeven wrote:
> Add a device node for the ROHM BD9571MWV PMIC.
>
> This was based on the example in the DT binding documentation, but using
> IRQ0 instead of a GPIO interrupt, as that matches the schematics, and
> because INTC-EX is a simpler block.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> v2:
> - Clarify the choice for INTC-EX.
Thanks, applied.
^ permalink raw reply
* Re: [PATCH] ARM: dts: r8a779x: Add '#reset-cells' in cpg-mssr
From: Simon Horman @ 2017-11-20 9:49 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Magnus Damm, Arnd Bergmann, linux-renesas-soc, devicetree,
linux-arm-kernel
In-Reply-To: <1510839357-11450-1-git-send-email-geert+renesas@glider.be>
On Thu, Nov 16, 2017 at 02:35:57PM +0100, Geert Uytterhoeven wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> With the latest dtc, we get many warnings about the missing
> '#reset-cells' property in these controllers, e.g.:
>
> arch/arm/boot/dts/r8a7790-lager.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /can@e6e80000:resets[0])
> arch/arm/boot/dts/r8a7792-blanche.dtb: Warning (resets_property): Missing property '#reset-cells' in node /soc/clock-controller@e6150000 or bad phandle (referred from /soc/dma-controller@e6700000:resets[0])
> arch/arm/boot/dts/r8a7792-wheat.dtb: Warning (resets_property): Missing property '#reset-cells' in node /soc/clock-controller@e6150000 or bad phandle (referred from /soc/ethernet@e6800000:resets[0])
> arch/arm/boot/dts/r8a7793-gose.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /gpio@e6050000:resets[0])
> arch/arm/boot/dts/r8a7794-alt.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /i2c@e6500000:resets[0])
> arch/arm/boot/dts/r8a7794-silk.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /interrupt-controller@e61c0000:resets[0])
>
> This adds it for the three r8a779x chips that were lacking it. The
> binding mandates this as <1>, so this is the value I use.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> [geert: Add fix for r8a7793.dtsi]
> Fixes: 34fbd2b12761d111 ("ARM: dts: r8a7790: Add reset control properties")
> Fixes: 6e11a322f1d7505d ("ARM: dts: r8a7792: Add reset control properties")
> Fixes: 84fb19e1d201ba86 ("ARM: dts: r8a7793: Add reset control properties")
> Fixes: 615beb759ca494a4 ("ARM: dts: r8a7794: Add reset control properties")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Thanks for following up on this, its been fouling up my todo list for a
while now. Applied for v4.16.
^ permalink raw reply
* Re: [PATCH 0/2] ARM: dts: renesas: Correct primary compatible value for eeprom
From: Simon Horman @ 2017-11-20 9:54 UTC (permalink / raw)
To: Geert Uytterhoeven; +Cc: Magnus Damm, linux-renesas-soc, devicetree
In-Reply-To: <1510840296-12767-1-git-send-email-geert+renesas@glider.be>
On Thu, Nov 16, 2017 at 02:51:34PM +0100, Geert Uytterhoeven wrote:
> Hi Simon, Magnus,
>
> The Renesas part numbers of the two-wire serial interface EEPROMs do not
> follow the 24Cxx pattern, but the R1EX24xxx pattern.
>
> Hence change the primary compatible values to the appropriate variant of
> "renesas,r1ex24xxx", like is already done on Gose.
>
> Note that the second patch depends on (trivial) "[PATCH] dt-bindings:
> i2c: eeprom: Add Renesas R1EX24128" to please checkpatch.
Noted.
I have applied these patches for v4.16.
^ permalink raw reply
* Re: [PATCH] ARM: dts: r8a779x: Add '#reset-cells' in cpg-mssr
From: Geert Uytterhoeven @ 2017-11-20 9:57 UTC (permalink / raw)
To: Simon Horman
Cc: Geert Uytterhoeven, Magnus Damm, Arnd Bergmann, Linux-Renesas,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
In-Reply-To: <20171120094957.2seep3qw4j274zrv-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>
Hi Simon,
On Mon, Nov 20, 2017 at 10:49 AM, Simon Horman <horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org> wrote:
> On Thu, Nov 16, 2017 at 02:35:57PM +0100, Geert Uytterhoeven wrote:
>> From: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
>>
>> With the latest dtc, we get many warnings about the missing
>> '#reset-cells' property in these controllers, e.g.:
>>
>> arch/arm/boot/dts/r8a7790-lager.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /can@e6e80000:resets[0])
>> arch/arm/boot/dts/r8a7792-blanche.dtb: Warning (resets_property): Missing property '#reset-cells' in node /soc/clock-controller@e6150000 or bad phandle (referred from /soc/dma-controller@e6700000:resets[0])
>> arch/arm/boot/dts/r8a7792-wheat.dtb: Warning (resets_property): Missing property '#reset-cells' in node /soc/clock-controller@e6150000 or bad phandle (referred from /soc/ethernet@e6800000:resets[0])
>> arch/arm/boot/dts/r8a7793-gose.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /gpio@e6050000:resets[0])
>> arch/arm/boot/dts/r8a7794-alt.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /i2c@e6500000:resets[0])
>> arch/arm/boot/dts/r8a7794-silk.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /interrupt-controller@e61c0000:resets[0])
>>
>> This adds it for the three r8a779x chips that were lacking it. The
>> binding mandates this as <1>, so this is the value I use.
>>
>> Signed-off-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
>> [geert: Add fix for r8a7793.dtsi]
>> Fixes: 34fbd2b12761d111 ("ARM: dts: r8a7790: Add reset control properties")
>> Fixes: 6e11a322f1d7505d ("ARM: dts: r8a7792: Add reset control properties")
>> Fixes: 84fb19e1d201ba86 ("ARM: dts: r8a7793: Add reset control properties")
>> Fixes: 615beb759ca494a4 ("ARM: dts: r8a7794: Add reset control properties")
>> Signed-off-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
>
> Thanks for following up on this, its been fouling up my todo list for a
> while now. Applied for v4.16.
As this is a fix for changes made in v4.15-rc1, don't we want it in v4.15?
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH 1/8] dt-bindings: can: rcar_can: document r8a774[35] can support
From: Simon Horman @ 2017-11-20 10:05 UTC (permalink / raw)
To: Fabrizio Castro
Cc: Wolfgang Grandegger, Marc Kleine-Budde, Rob Herring, Mark Rutland,
Geert Uytterhoeven, linux-can, netdev, devicetree,
linux-renesas-soc, Chris Paterson, Biju Das
In-Reply-To: <1510067449-17017-2-git-send-email-fabrizio.castro@bp.renesas.com>
On Tue, Nov 07, 2017 at 03:10:42PM +0000, Fabrizio Castro wrote:
> Document "renesas,can-r8a7743" and "renesas,can-r8a7745" compatible
> strings. Since the fallback compatible string ("renesas,rcar-gen2-can")
> activates the right code in the driver, no driver change is needed.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
^ permalink raw reply
* Re: [PATCH 0/8] Add CAN support to iwg2[02]d
From: Simon Horman @ 2017-11-20 10:07 UTC (permalink / raw)
To: Fabrizio Castro
Cc: Wolfgang Grandegger, Marc Kleine-Budde, Rob Herring, Mark Rutland,
Russell King, Laurent Pinchart, Geert Uytterhoeven, Linus Walleij,
Magnus Damm, linux-can, netdev, devicetree, linux-arm-kernel,
linux-renesas-soc, linux-gpio, Chris Paterson, Biju Das
In-Reply-To: <1510067449-17017-1-git-send-email-fabrizio.castro@bp.renesas.com>
On Tue, Nov 07, 2017 at 03:10:41PM +0000, Fabrizio Castro wrote:
> Hello,
>
> this series delivers all of the changes necessary to add CAN bus
> support to the:
> * iW-RainboW-G22D SODIMM, and
> * iW-RainboW-G20M-Qseven-RZG1M
> development platforms, including documentation, pinctrl driver, SoC
> specific device trees, and board specific device trees.
>
> This work has been based and tested on top of:
> renesas-devel-20171106-v4.14-rc8
>
> Best regards,
>
> Fabrizio Castro (8):
> dt-bindings: can: rcar_can: document r8a774[35] can support
> pinctrl: sh-pfc: r8a7745: Add CAN[01] support
> ARM: dts: r8a7745: Add CAN[01] SoC support
> ARM: dts: iwg22d-sodimm: Add can0 support to carrier board
> ARM: dts: iwg22d-sodimm-dbhd-ca: Add can1 support to HDMI DB
> ARM: dts: r8a7743: Add CAN[01] SoC support
> ARM: dts: iwg20d-q7-common: Add can0 support to carrier board
> ARM: dts: iwg20d-q7-dbcm-ca: Add can1 support to camera DB
Thanks, I have applied the "ARM: dts" patches for inclusion in v4.16.
^ permalink raw reply
* Re: [PATCH v2] dt-bindings: mtd: Add sst25vf016b to the list of supported chip names
From: Geert Uytterhoeven @ 2017-11-20 10:08 UTC (permalink / raw)
To: Fabrizio Castro
Cc: Cyrille Pitchen, David Woodhouse, Brian Norris, Boris Brezillon,
Marek Vasut, Richard Weinberger, Rob Herring, Mark Rutland,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Chris Paterson,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Biju Das,
MTD Maling List
In-Reply-To: <TY1PR06MB0895157B208F8281B635340EC0220-/PRLmSCtZ16EeHdvShrxA20DtJ1/0DrXvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
Hi Fabrizio,
On Mon, Nov 20, 2017 at 10:43 AM, Fabrizio Castro
<fabrizio.castro-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org> wrote:
>> On Fri, Nov 17, 2017 at 6:36 PM, Cyrille Pitchen
>> <cyrille.pitchen-yU5RGvR974pGWvitb5QawA@public.gmane.org> wrote:
>> BTW, "sst" (for Silicon Storage Technology) should be added to
>> Documentation/devicetree/bindings/vendor-prefixes.txt, too, to avoid another
>> warning:
>>
>> WARNING: DT compatible string vendor "sst" appears un-documented --
>> check ./Documentation/devicetree/bindings/vendor-prefixes.txt
>> #79: FILE: arch/arm/boot/dts/r8a7743-iwg20m.dtsi:79:
>> + compatible = "sst,sst25vf016b", "jedec,spi-nor";
>
> we did submit a patch to fix this ("of: add vendor prefix for Silicon Storage Technology Inc."):
> https://patchwork.kernel.org/patch/9946889/
>
> a while ago
And it is queued in dt-rh/for-next (I thought I had that tree included, but
apparently I hadn't. Fixed ;-)
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox