* Re: [PATCH v6 2/5] dt-bindings: scsi: ufs: add document for hisi-ufs
From: Rob Herring @ 2017-12-07 23:35 UTC (permalink / raw)
To: Li Wei
Cc: mark.rutland, xuwei5, catalin.marinas, will.deacon, vinholikatti,
jejb, martin.petersen, khilman, arnd, gregory.clement,
thomas.petazzoni, yamada.masahiro, riku.voipio, treding, krzk,
eric, devicetree, linux-kernel, linux-arm-kernel, linux-scsi,
zangleigang, gengjianfeng, guodong.xu, zhangfei.gao, fengbaopeng
In-Reply-To: <20171207102026.14977-3-liwei213@huawei.com>
On Thu, Dec 07, 2017 at 06:20:23PM +0800, Li Wei wrote:
> add ufs node document for Hisilicon.
>
> Signed-off-by: Li Wei <liwei213@huawei.com>
> ---
Version history?
> Documentation/devicetree/bindings/ufs/ufs-hisi.txt | 38 ++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/ufs/ufs-hisi.txt
>
> diff --git a/Documentation/devicetree/bindings/ufs/ufs-hisi.txt b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
> new file mode 100644
> index 000000000000..73e10698960e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
> @@ -0,0 +1,38 @@
> +* Hisilicon Universal Flash Storage (UFS) Host Controller
> +
> +UFS nodes are defined to describe on-chip UFS hardware macro.
> +Each UFS Host Controller should have its own node.
> +
> +Required properties:
> +- compatible : compatible list, contains one of the following -
> + "hisilicon,hi3660-ufs", "jedec,ufs-1.1" for hisi ufs
> + host controller present on Hi36xx chipset.
> +- reg : should contain UFS register address space & UFS SYS CTRL register address,
> +- interrupt-parent : interrupt device
> +- interrupts : interrupt number
> +- clocks : List of phandle and clock specifier pairs
> +- clock-names : List of clock input name strings sorted in the same
> + order as the clocks property. "ref_clk", "phy_clk" is optional
> +- resets : reset node register, one reset the clk and the other reset the controller
> +- reset-names : describe reset node register
> +
> +Example:
> +
> + ufs: ufs@ff3b0000 {
> + compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
> + /* 0: HCI standard */
> + /* 1: UFS SYS CTRL */
> + reg = <0x0 0xff3b0000 0x0 0x1000>,
> + <0x0 0xff3b1000 0x0 0x1000>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
> + <&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
> + clock-names = "ref_clk", "phy_clk";
> + freq-table-hz = <0 0>, <0 0>;
? Not documented.
> + /* offset: 0x84; bit: 12 */
> + /* offset: 0x84; bit: 7 */
> + resets = <&crg_rst 0x84 12>,
> + <&crg_rst 0x84 7>;
> + reset-names = "rst", "assert";
> + };
> --
> 2.15.0
>
^ permalink raw reply
* Re: [PATCH v2 1/7] dt-bindings: marvell: Add documentation for the North Bridge PM on Armada 37xx
From: Rob Herring @ 2017-12-07 23:36 UTC (permalink / raw)
To: Gregory CLEMENT
Cc: Rafael J. Wysocki, Viresh Kumar, linux-pm-u79uwXL29TY76Z2rM5mHXA,
Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
devicetree-u79uwXL29TY76Z2rM5mHXA, Thomas Petazzoni,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Antoine Tenart,
Miquèl Raynal, Nadav Haklai, Victor Gu, Marcin Wojtas,
Wilson Ding, Hua Jing, Neta Zur Hershkovits, Evan Wang,
Andre Heider
In-Reply-To: <20171207135616.23670-2-gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
On Thu, Dec 07, 2017 at 02:56:10PM +0100, Gregory CLEMENT wrote:
> Extend the documentation of the Armada 37xx SoC with the the North
> Bridge Power Management component.
>
> Signed-off-by: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> ---
> .../devicetree/bindings/arm/marvell/armada-37xx.txt | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
Reviewed-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v2 2/2] uio: Introduce UIO driver dt-binding documentation
From: Rob Herring @ 2017-12-07 23:42 UTC (permalink / raw)
To: Andrey Zhizhikin
Cc: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <1512658019-30279-3-git-send-email-andrey.z-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
On Thu, Dec 07, 2017 at 03:46:59PM +0100, Andrey Zhizhikin wrote:
> Create Documentation portion of UIO driver with Generic Interrupt Handler.
>
> This patch creates a dt-binding documentation portion of the UIO Driver.
>
> In addition to definition of standard required properties, new optional
> property defined:
> - no-threaded-irq: when present, request_irq() is called with
> IRQF_NO_THREAD flag set, effectively skipping threaded interrupt
> handler and taking bottom-half into irq_handler
>
> Signed-off-by: Andrey Zhizhikin <andrey.z-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>
> diff --git a/Documentation/devicetree/bindings/uio/uio-pdrv-genirq.txt b/Documentation/devicetree/bindings/uio/uio-pdrv-genirq.txt
> new file mode 100644
> index 0000000..dfcc362
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/uio/uio-pdrv-genirq.txt
> @@ -0,0 +1,46 @@
> +* Userspace I/O platform driver with generic IRQ handling code.
No. See prior discussions:
https://lkml.org/lkml/2016/5/18/457
https://lkml.org/lkml/2017/10/8/238
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v4 1/2] of: documentation: add bindings documentation for TS-7970
From: Rob Herring @ 2017-12-07 23:45 UTC (permalink / raw)
To: Sebastien Bourdelin
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
kernel-4ysUXcep3aM1wj+D4I0NRVaTQe2KTcn/,
fabio.estevam-3arQi8VN3Tc, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
shawnguo-DgEjT+Ai2ygdnm+yROfE0A, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
mark.rutland-5wv7dgnIgG8, devicetree-u79uwXL29TY76Z2rM5mHXA,
mark-L1vi/lXTdtvnC/t2CciAbw, kris-L1vi/lXTdtvnC/t2CciAbw
In-Reply-To: <20171207160550.2782-1-sebastien.bourdelin-4ysUXcep3aM1wj+D4I0NRVaTQe2KTcn/@public.gmane.org>
On Thu, Dec 07, 2017 at 11:05:49AM -0500, Sebastien Bourdelin wrote:
> This adds the documentation for the TS-7970 by Technologic Systems.
>
> Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin-4ysUXcep3aM1wj+D4I0NRVaTQe2KTcn/@public.gmane.org>
> ---
> Changes v3 -> v4:
> - rebase on master
>
> Changes v1 -> v2:
> - rebase on master
> ---
> Documentation/devicetree/bindings/arm/technologic.txt | 6 ++++++
> 1 file changed, 6 insertions(+)
Reviewed-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v2 1/3] regulator: axp20x: add drivevbus support for axp803
From: Rob Herring @ 2017-12-07 23:46 UTC (permalink / raw)
To: Jagan Teki
Cc: Maxime Ripard, Chen-Yu Tsai, Icenowy Zheng, Mark Rutland,
Catalin Marinas, Will Deacon, Michael Trimarchi,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Jagan Teki
In-Reply-To: <1512673460-7865-1-git-send-email-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
On Fri, Dec 08, 2017 at 12:34:18AM +0530, Jagan Teki wrote:
> Like axp221, axp223, axp813 the axp803 is also supporting external
> regulator to drive the OTG VBus through N_VBUSEN PMIC pin.
>
> Add support for it.
>
> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
> ---
> Changes for v2:
> - New patch
>
> Documentation/devicetree/bindings/mfd/axp20x.txt | 2 +-
> drivers/regulator/axp20x-regulator.c | 2 ++
> 2 files changed, 3 insertions(+), 1 deletion(-)
Reviewed-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v6 2/2] dt-bindings: add eeprom "no-read-rollover" property
From: Rob Herring @ 2017-12-07 23:51 UTC (permalink / raw)
To: Sven Van Asbroeck
Cc: Mark Rutland, wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org,
Bartosz Golaszewski, Sekhar Nori, Sakari Ailus, David Lechner,
Javier Martinez Canillas, Divagar Mohandass,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
In-Reply-To: <1512674779-10349-3-git-send-email-svendev-fuHqz3Nb1YI@public.gmane.org>
On Thu, Dec 7, 2017 at 1:26 PM, Sven Van Asbroeck <svendev-fuHqz3Nb1YI@public.gmane.org> wrote:
> Adds an optional property for at24 eeproms.
> This parameterless property indicates that the multi-address eeprom
> does not automatically roll over reads to the next slave address.
>
> Signed-off-by: Sven Van Asbroeck <svendev-fuHqz3Nb1YI@public.gmane.org>
> ---
> Documentation/devicetree/bindings/eeprom/eeprom.txt | 5 +++++
> 1 file changed, 5 insertions(+)
I acked v5. Please add acks/reviewed-bys when posting new versions.
Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH] dt-bindings: at24/eeprom: add an undocumented compatible string
From: Javier Martinez Canillas @ 2017-12-08 0:03 UTC (permalink / raw)
To: Rob Herring
Cc: Bartosz Golaszewski, Mark Rutland, Wolfram Sang,
Divagar Mohandass, David Lechner, devicetree@vger.kernel.org,
Linux Kernel
In-Reply-To: <20171207225045.tm3rnyjaylx46nxy@rob-hp-laptop>
Hello Rob and Bartosz,
On Thu, Dec 7, 2017 at 11:50 PM, Rob Herring <robh@kernel.org> wrote:
> On Wed, Dec 06, 2017 at 11:12:19AM +0100, Bartosz Golaszewski wrote:
>> The "atmel,sdp" compatible is reported by checkpatch as undocumented.
>>
>> Add it to the device tree bindings document for at24.
>>
>> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
>> ---
>> Documentation/devicetree/bindings/eeprom/eeprom.txt | 2 ++
>> 1 file changed, 2 insertions(+)
>
> Reviewed-by: Rob Herring <robh@kernel.org>
My understanding is that DT bindings not necessarily have to list all
the possible compatible strings but can also document a set
comprehension of the possible values. If that's the case, then I
disagree with this patch and I think that this is caused by a
checkpatch limitation.
In the case of the Atmel EEPROM DT binding, it was quite lax at
describing the possible compatible strings. It just used to say:
- compatible : should be "<manufacturer>,<type>", like these:
Followed by a list of _possible_ compatible strings. So these were
just examples, it was by no means a comprehensive list.
And then it used to say:
If there is no specific driver for <manufacturer>, a generic driver
based on <type> is selected. Possible types are:
"24c00", "24c01", "24c02", "24c04", "24c08", "24c16", "24c32",
"24c64", "24c128", "24c256", "24c512", "24c1024", "spd"
Which basically said that it was valid to only match using the device
model but not the vendor part of the compatible string. This is
obviously incorrect and only worked due a implementation detail in the
I2C core.
After some discussions, the DT binding was changed to say the following:
If there is no specific driver for <manufacturer>, a generic device
with <type> and manufacturer "atmel" should be used. Possible types
are:
"24c00", "24c01", "24c02", "24c04", "24c08", "24c16", "24c32",
"24c64", "24c128", "24c256", "24c512", "24c1024", "spd"
And the driver changed accordingly to honor these. Old DTBs just using
"24c08" or "microchip,24c08" should still work, but the correct thing
to do now is to use "atmel,24c08".
The "spd" <type> is in the list mentioned above, so the "atmel,spd"
isn't documented as the $SUBJECT commit message says. In any case,
what could be done is to instead reword the DT binding to list all the
valid "atmel,<type>" combinations.
I didn't do that in my patch since it originally said "Possibles types
are", not "all the possible types are" so it wasn't clear to me if
there were other undocumented <types> that were still valid.
Best regards,
Javier
^ permalink raw reply
* [PATCH v6 net-next,mips 0/7] Cavium OCTEON-III network driver.
From: David Daney @ 2017-12-08 0:09 UTC (permalink / raw)
To: linux-mips-6z/3iImG2C8G8FEW9MqTrA, ralf-6z/3iImG2C8G8FEW9MqTrA,
James Hogan, netdev-u79uwXL29TY76Z2rM5mHXA, David S. Miller,
Rob Herring, Mark Rutland
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA, Steven J. Hill,
devicetree-u79uwXL29TY76Z2rM5mHXA, Andrew Lunn, Florian Fainelli,
Philippe Ombredanne, David Daney
We are adding the Cavium OCTEON-III network driver. But since
interacting with the input and output queues is done via special CPU
local memory, we also need to add support to the MIPS/Octeon
architecture code. Aren't SoCs nice in this way?
The first five patches add the SoC support needed by the driver, the
last two add the driver and an entry in MAINTAINERS.
Since these touch several subsystems (mips, netdev), I would
propose merging via netdev, but defer to the maintainers if they think
something else would work better.
A separate pull request was recently done by Steven Hill for the
firmware required by the driver.
Changes in v6:
o Added back cleanup patch for previous generation SoC "staging"
driver, as Greg K-H acked it.
o Moved FPA driver to drivers/net/ethernet/cavium/octeon as it is
currently only used by the octeon3-ethernet driver.
o Many code formatting fixes as noted by davem.
Changes in v5:
o Removed cleanup patch for previous generation SoC "staging" driver,
as it will be sent as a follow-on.
o Fixed kernel doc formatting in all patches.
o Removed redundant licensing text boilerplate.
o Reviewed-by: header added to 2/7.
o Rewrote locking code in 3/7 to eliminate inline asm.
Changes in v4:
o Use phy_print_status() instead of open coding the equivalent.
o Print warning on phy mode mismatch.
o Improve dt-bindings and add Acked-by.
Changes in v3:
o Fix PKI (RX path) initialization to work with little endian kernel.
Changes in v2:
o Cleanup and use of standard bindings in the device tree bindings
document.
o Added (hopefully) clarifying comments about several OCTEON
architectural peculiarities.
o Removed unused testing code from the driver.
o Removed some module parameters that already default to the proper
values.
o KConfig cleanup, including testing on x86_64, arm64 and mips.
o Fixed breakage to the driver for previous generation of OCTEON SoCs (in
the staging directory still).
o Verified bisectability of the patch set.
Carlos Munoz (4):
dt-bindings: Add Cavium Octeon Common Ethernet Interface.
MIPS: Octeon: Enable LMTDMA/LMTST operations.
MIPS: Octeon: Add a global resource manager.
netdev: octeon-ethernet: Add Cavium Octeon III support.
David Daney (3):
MIPS: Octeon: Automatically provision CVMSEG space.
staging: octeon: Remove USE_ASYNC_IOBDMA macro.
MAINTAINERS: Add entry for
drivers/net/ethernet/cavium/octeon/octeon3-*
.../devicetree/bindings/net/cavium-bgx.txt | 61 +
MAINTAINERS | 6 +
arch/mips/cavium-octeon/Kconfig | 27 +-
arch/mips/cavium-octeon/Makefile | 1 +
arch/mips/cavium-octeon/resource-mgr.c | 351 ++++
arch/mips/cavium-octeon/setup.c | 22 +-
.../asm/mach-cavium-octeon/kernel-entry-init.h | 20 +-
arch/mips/include/asm/mipsregs.h | 2 +
arch/mips/include/asm/octeon/octeon.h | 32 +-
arch/mips/include/asm/processor.h | 2 +-
arch/mips/kernel/octeon_switch.S | 2 -
arch/mips/mm/tlbex.c | 29 +-
drivers/net/ethernet/cavium/Kconfig | 59 +-
drivers/net/ethernet/cavium/octeon/Makefile | 7 +
.../net/ethernet/cavium/octeon/octeon3-bgx-nexus.c | 417 ++++
.../net/ethernet/cavium/octeon/octeon3-bgx-port.c | 2018 +++++++++++++++++++
drivers/net/ethernet/cavium/octeon/octeon3-core.c | 2079 ++++++++++++++++++++
drivers/net/ethernet/cavium/octeon/octeon3-fpa.c | 358 ++++
drivers/net/ethernet/cavium/octeon/octeon3-pki.c | 823 ++++++++
drivers/net/ethernet/cavium/octeon/octeon3-pko.c | 1688 ++++++++++++++++
drivers/net/ethernet/cavium/octeon/octeon3-sso.c | 301 +++
drivers/net/ethernet/cavium/octeon/octeon3.h | 430 ++++
drivers/staging/octeon/ethernet-defines.h | 6 -
drivers/staging/octeon/ethernet-rx.c | 25 +-
drivers/staging/octeon/ethernet-tx.c | 85 +-
25 files changed, 8709 insertions(+), 142 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/cavium-bgx.txt
create mode 100644 arch/mips/cavium-octeon/resource-mgr.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-bgx-nexus.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-bgx-port.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-core.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-fpa.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-pki.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-pko.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-sso.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3.h
--
2.14.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH v6 net-next,mips 1/7] dt-bindings: Add Cavium Octeon Common Ethernet Interface.
From: David Daney @ 2017-12-08 0:09 UTC (permalink / raw)
To: linux-mips, ralf, James Hogan, netdev, David S. Miller,
Rob Herring, Mark Rutland
Cc: linux-kernel, Steven J. Hill, devicetree, Andrew Lunn,
Florian Fainelli, Philippe Ombredanne, Carlos Munoz,
Steven J . Hill, David Daney
In-Reply-To: <20171208000934.6554-1-david.daney@cavium.com>
From: Carlos Munoz <cmunoz@cavium.com>
Add bindings for Common Ethernet Interface (BGX) block.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Carlos Munoz <cmunoz@cavium.com>
Signed-off-by: Steven J. Hill <Steven.Hill@cavium.com>
Signed-off-by: David Daney <david.daney@cavium.com>
---
.../devicetree/bindings/net/cavium-bgx.txt | 61 ++++++++++++++++++++++
1 file changed, 61 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/cavium-bgx.txt
diff --git a/Documentation/devicetree/bindings/net/cavium-bgx.txt b/Documentation/devicetree/bindings/net/cavium-bgx.txt
new file mode 100644
index 000000000000..830c5f08dddd
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cavium-bgx.txt
@@ -0,0 +1,61 @@
+* Common Ethernet Interface (BGX) block
+
+Properties:
+
+- compatible: "cavium,octeon-7890-bgx": Compatibility with all cn7xxx SOCs.
+
+- reg: The base address of the BGX block.
+
+- #address-cells: Must be <1>.
+
+- #size-cells: Must be <0>. BGX addresses have no size component.
+
+A BGX block has several children, each representing an Ethernet
+interface.
+
+
+* Ethernet Interface (BGX port) connects to PKI/PKO
+
+Properties:
+
+- compatible: "cavium,octeon-7890-bgx-port": Compatibility with all
+ cn7xxx SOCs.
+
+ "cavium,octeon-7360-xcv": Compatibility with cn73xx SOCs
+ for RGMII.
+
+- reg: The index of the interface within the BGX block.
+
+Optional properties:
+
+- local-mac-address: Mac address for the interface.
+
+- phy-handle: phandle to the phy node connected to the interface.
+
+- phy-mode: described in ethernet.txt.
+
+- fixed-link: described in fixed-link.txt.
+
+Example:
+
+ ethernet-mac-nexus@11800e0000000 {
+ compatible = "cavium,octeon-7890-bgx";
+ reg = <0x00011800 0xe0000000 0x00000000 0x01000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@0 {
+ compatible = "cavium,octeon-7360-xcv";
+ reg = <0>;
+ local-mac-address = [ 00 01 23 45 67 89 ];
+ phy-handle = <&phy3>;
+ phy-mode = "rgmii-rxid"
+ };
+ ethernet@1 {
+ compatible = "cavium,octeon-7890-bgx-port";
+ reg = <1>;
+ local-mac-address = [ 00 01 23 45 67 8a ];
+ phy-handle = <&phy4>;
+ phy-mode = "sgmii"
+ };
+ };
--
2.14.3
^ permalink raw reply related
* [PATCH v6 net-next,mips 2/7] MIPS: Octeon: Enable LMTDMA/LMTST operations.
From: David Daney @ 2017-12-08 0:09 UTC (permalink / raw)
To: linux-mips, ralf, James Hogan, netdev, David S. Miller,
Rob Herring, Mark Rutland
Cc: linux-kernel, Steven J. Hill, devicetree, Andrew Lunn,
Florian Fainelli, Philippe Ombredanne, Carlos Munoz,
Steven J . Hill, David Daney
In-Reply-To: <20171208000934.6554-1-david.daney@cavium.com>
From: Carlos Munoz <cmunoz@cavium.com>
LMTDMA/LMTST operations move data between cores and I/O devices:
* LMTST operations can send an address and a variable length
(up to 128 bytes) of data to an I/O device.
* LMTDMA operations can send an address and a variable length
(up to 128) of data to the I/O device and then return a
variable length (up to 128 bytes) response from the I/O device.
For both LMTST and LMTDMA, the data sent to the device is first stored
in the CVMSEG core local memory cache line indexed by
CVMMEMCTL[LMTLINE], the data is then atomically transmitted to the
device with a store to the CVMSEG LMTDMA trigger location.
Reviewed-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Carlos Munoz <cmunoz@cavium.com>
Signed-off-by: Steven J. Hill <Steven.Hill@cavium.com>
Signed-off-by: David Daney <david.daney@cavium.com>
---
arch/mips/cavium-octeon/setup.c | 6 ++++++
arch/mips/include/asm/octeon/octeon.h | 12 ++++++++++--
2 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index a8034d0dcade..99e6a68bc652 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -609,6 +609,12 @@ void octeon_user_io_init(void)
#else
cvmmemctl.s.cvmsegenak = 0;
#endif
+ if (OCTEON_IS_OCTEON3()) {
+ /* Enable LMTDMA */
+ cvmmemctl.s.lmtena = 1;
+ /* Scratch line to use for LMT operation */
+ cvmmemctl.s.lmtline = 2;
+ }
/* R/W If set, CVMSEG is available for loads/stores in
* supervisor mode. */
cvmmemctl.s.cvmsegenas = 0;
diff --git a/arch/mips/include/asm/octeon/octeon.h b/arch/mips/include/asm/octeon/octeon.h
index c99c4b6a79f4..92a17d67c1fa 100644
--- a/arch/mips/include/asm/octeon/octeon.h
+++ b/arch/mips/include/asm/octeon/octeon.h
@@ -179,7 +179,15 @@ union octeon_cvmemctl {
/* RO 1 = BIST fail, 0 = BIST pass */
__BITFIELD_FIELD(uint64_t wbfbist:1,
/* Reserved */
- __BITFIELD_FIELD(uint64_t reserved:17,
+ __BITFIELD_FIELD(uint64_t reserved_52_57:6,
+ /* When set, LMTDMA/LMTST operations are permitted */
+ __BITFIELD_FIELD(uint64_t lmtena:1,
+ /* Selects the CVMSEG LM cacheline used by LMTDMA
+ * LMTST and wide atomic store operations.
+ */
+ __BITFIELD_FIELD(uint64_t lmtline:6,
+ /* Reserved */
+ __BITFIELD_FIELD(uint64_t reserved_41_44:4,
/* OCTEON II - TLB replacement policy: 0 = bitmask LRU; 1 = NLU.
* This field selects between the TLB replacement policies:
* bitmask LRU or NLU. Bitmask LRU maintains a mask of
@@ -275,7 +283,7 @@ union octeon_cvmemctl {
/* R/W Size of local memory in cache blocks, 54 (6912
* bytes) is max legal value. */
__BITFIELD_FIELD(uint64_t lmemsz:6,
- ;)))))))))))))))))))))))))))))))))
+ ;))))))))))))))))))))))))))))))))))))
} s;
};
--
2.14.3
^ permalink raw reply related
* [PATCH v6 net-next,mips 3/7] MIPS: Octeon: Automatically provision CVMSEG space.
From: David Daney @ 2017-12-08 0:09 UTC (permalink / raw)
To: linux-mips, ralf, James Hogan, netdev, David S. Miller,
Rob Herring, Mark Rutland
Cc: linux-kernel, Steven J. Hill, devicetree, Andrew Lunn,
Florian Fainelli, Philippe Ombredanne, David Daney, Carlos Munoz
In-Reply-To: <20171208000934.6554-1-david.daney@cavium.com>
Remove CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE and automatically calculate
the amount of CVMSEG space needed.
1st 128-bytes: Use by IOBDMA
2nd 128-bytes: Reserved by kernel for scratch/TLS emulation.
3rd 128-bytes: OCTEON-III LMTLINE
New config variable CONFIG_CAVIUM_OCTEON_EXTRA_CVMSEG provisions
additional lines, defaults to zero.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Carlos Munoz <cmunoz@caviumnetworks.com>
---
arch/mips/cavium-octeon/Kconfig | 27 ++++++++++++--------
arch/mips/cavium-octeon/setup.c | 16 ++++++------
.../asm/mach-cavium-octeon/kernel-entry-init.h | 20 +++++++++------
arch/mips/include/asm/mipsregs.h | 2 ++
arch/mips/include/asm/octeon/octeon.h | 2 ++
arch/mips/include/asm/processor.h | 2 +-
arch/mips/kernel/octeon_switch.S | 2 --
arch/mips/mm/tlbex.c | 29 ++++++----------------
drivers/staging/octeon/ethernet-defines.h | 2 +-
9 files changed, 50 insertions(+), 52 deletions(-)
diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig
index 204a1670fd9b..a50d1aa5863b 100644
--- a/arch/mips/cavium-octeon/Kconfig
+++ b/arch/mips/cavium-octeon/Kconfig
@@ -11,21 +11,26 @@ config CAVIUM_CN63XXP1
non-CN63XXP1 hardware, so it is recommended to select "n"
unless it is known the workarounds are needed.
-config CAVIUM_OCTEON_CVMSEG_SIZE
- int "Number of L1 cache lines reserved for CVMSEG memory"
- range 0 54
- default 1
- help
- CVMSEG LM is a segment that accesses portions of the dcache as a
- local memory; the larger CVMSEG is, the smaller the cache is.
- This selects the size of CVMSEG LM, which is in cache blocks. The
- legally range is from zero to 54 cache blocks (i.e. CVMSEG LM is
- between zero and 6192 bytes).
-
endif # CPU_CAVIUM_OCTEON
if CAVIUM_OCTEON_SOC
+config CAVIUM_OCTEON_EXTRA_CVMSEG
+ int "Number of extra L1 cache lines reserved for CVMSEG memory"
+ range 0 50
+ default 0
+ help
+ CVMSEG LM is a segment that accesses portions of the dcache
+ as a local memory; the larger CVMSEG is, the smaller the
+ cache is. The kernel uses two or three blocks (one for TLB
+ exception handlers, one for driver IOBDMA operations, and on
+ models that need it, one for LMTDMA operations). This
+ selects an optional extra number of CVMSEG lines for use by
+ other software.
+
+ Normally no extra lines are required, and this parameter
+ should be set to zero.
+
config CAVIUM_OCTEON_LOCK_L2
bool "Lock often used kernel code in the L2"
default "y"
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 99e6a68bc652..51c4d3c3cada 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -68,6 +68,12 @@ extern void pci_console_init(const char *arg);
static unsigned long long max_memory = ULLONG_MAX;
static unsigned long long reserve_low_mem;
+/*
+ * modified in hernel-entry-init.h, must have an initial value to keep
+ * it from being clobbered when bss is zeroed.
+ */
+u32 octeon_cvmseg_lines = 2;
+
DEFINE_SEMAPHORE(octeon_bootbus_sem);
EXPORT_SYMBOL(octeon_bootbus_sem);
@@ -604,11 +610,7 @@ void octeon_user_io_init(void)
/* R/W If set, CVMSEG is available for loads/stores in
* kernel/debug mode. */
-#if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
cvmmemctl.s.cvmsegenak = 1;
-#else
- cvmmemctl.s.cvmsegenak = 0;
-#endif
if (OCTEON_IS_OCTEON3()) {
/* Enable LMTDMA */
cvmmemctl.s.lmtena = 1;
@@ -626,9 +628,9 @@ void octeon_user_io_init(void)
/* Setup of CVMSEG is done in kernel-entry-init.h */
if (smp_processor_id() == 0)
- pr_notice("CVMSEG size: %d cache lines (%d bytes)\n",
- CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE,
- CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE * 128);
+ pr_notice("CVMSEG size: %u cache lines (%u bytes)\n",
+ octeon_cvmseg_lines,
+ octeon_cvmseg_lines * 128);
if (octeon_has_feature(OCTEON_FEATURE_FAU)) {
union cvmx_iob_fau_timeout fau_timeout;
diff --git a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
index c38b38ce5a3d..cdcca60978a2 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
@@ -26,11 +26,18 @@
# a3 = address of boot descriptor block
.set push
.set arch=octeon
+ mfc0 v1, CP0_PRID_REG
+ andi v1, 0xff00
+ li v0, 0x9500 # cn78XX or later
+ subu v1, v1, v0
+ li t2, 2 + CONFIG_CAVIUM_OCTEON_EXTRA_CVMSEG
+ bltz v1, 1f
+ addiu t2, 1 # t2 has cvmseg_size
+1:
# Read the cavium mem control register
dmfc0 v0, CP0_CVMMEMCTL_REG
# Clear the lower 6 bits, the CVMSEG size
- dins v0, $0, 0, 6
- ori v0, CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE
+ dins v0, t2, 0, 6
dmtc0 v0, CP0_CVMMEMCTL_REG # Write the cavium mem control register
dmfc0 v0, CP0_CVMCTL_REG # Read the cavium control register
# Disable unaligned load/store support but leave HW fixup enabled
@@ -70,7 +77,7 @@
# Flush dcache after config change
cache 9, 0($0)
# Zero all of CVMSEG to make sure parity is correct
- dli v0, CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE
+ move v0, t2
dsll v0, 7
beqz v0, 2f
1: dsubu v0, 8
@@ -126,12 +133,7 @@
LONG_L sp, (t0)
# Set the SP global variable to zero so the master knows we've started
LONG_S zero, (t0)
-#ifdef __OCTEON__
- syncw
- syncw
-#else
sync
-#endif
# Jump to the normal Linux SMP entry point
j smp_bootstrap
nop
@@ -148,6 +150,8 @@
#endif /* CONFIG_SMP */
octeon_main_processor:
+ dla v0, octeon_cvmseg_lines
+ sw t2, 0(v0)
.set pop
.endm
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 6b1f1ad0542c..0b588640b65a 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -1126,6 +1126,8 @@
#define FPU_CSR_RD 0x3 /* towards -Infinity */
+#define CAVIUM_OCTEON_SCRATCH_OFFSET (2 * 128 - 16 - 32768)
+
#ifndef __ASSEMBLY__
/*
diff --git a/arch/mips/include/asm/octeon/octeon.h b/arch/mips/include/asm/octeon/octeon.h
index 92a17d67c1fa..f01af2469874 100644
--- a/arch/mips/include/asm/octeon/octeon.h
+++ b/arch/mips/include/asm/octeon/octeon.h
@@ -359,6 +359,8 @@ static inline uint32_t octeon_npi_read32(uint64_t address)
extern struct cvmx_bootinfo *octeon_bootinfo;
+extern u32 octeon_cvmseg_lines;
+
extern uint64_t octeon_bootloader_entry_addr;
extern void (*octeon_irq_setup_secondary)(void);
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index af34afbc32d9..1a20f9c5509f 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -216,7 +216,7 @@ struct octeon_cop2_state {
.cp2 = {0,},
struct octeon_cvmseg_state {
- unsigned long cvmseg[CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE]
+ unsigned long cvmseg[CONFIG_CAVIUM_OCTEON_EXTRA_CVMSEG + 3]
[cpu_dcache_line_size() / sizeof(unsigned long)];
};
diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S
index e42113fe2762..4f56902d5ee7 100644
--- a/arch/mips/kernel/octeon_switch.S
+++ b/arch/mips/kernel/octeon_switch.S
@@ -29,7 +29,6 @@
cpu_save_nonscratch a0
LONG_S ra, THREAD_REG31(a0)
-#if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
/* Check if we need to store CVMSEG state */
dmfc0 t0, $11,7 /* CvmMemCtl */
bbit0 t0, 6, 3f /* Is user access enabled? */
@@ -58,7 +57,6 @@
dmfc0 t0, $11,7 /* CvmMemCtl */
xori t0, t0, 0x40 /* Bit 6 is CVMSEG user enable */
dmtc0 t0, $11,7 /* CvmMemCtl */
-#endif
3:
#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 79b9f2ad3ff5..3d3dfba465ae 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -115,33 +115,17 @@ static int use_lwx_insns(void)
return 0;
}
}
-#if defined(CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE) && \
- CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
-static bool scratchpad_available(void)
-{
- return true;
-}
-static int scratchpad_offset(int i)
-{
- /*
- * CVMSEG starts at address -32768 and extends for
- * CAVIUM_OCTEON_CVMSEG_SIZE 128 byte cache lines.
- */
- i += 1; /* Kernel use starts at the top and works down. */
- return CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE * 128 - (8 * i) - 32768;
-}
-#else
-static bool scratchpad_available(void)
-{
- return false;
-}
+
static int scratchpad_offset(int i)
{
+ if (IS_ENABLED(CONFIG_CPU_CAVIUM_OCTEON))
+ return (CAVIUM_OCTEON_SCRATCH_OFFSET - (8 * i));
+
BUG();
/* Really unreachable, but evidently some GCC want this. */
return 0;
}
-#endif
+
/*
* Found by experiment: At least some revisions of the 4kc throw under
* some circumstances a machine check exception, triggered by invalid
@@ -1302,7 +1286,8 @@ static void build_r4000_tlb_refill_handler(void)
memset(relocs, 0, sizeof(relocs));
memset(final_handler, 0, sizeof(final_handler));
- if (IS_ENABLED(CONFIG_64BIT) && (scratch_reg >= 0 || scratchpad_available()) && use_bbit_insns()) {
+ if (IS_ENABLED(CONFIG_64BIT) && use_bbit_insns() &&
+ (scratch_reg >= 0 || IS_ENABLED(CONFIG_CPU_CAVIUM_OCTEON))) {
htlb_info = build_fast_tlb_refill_handler(&p, &l, &r, K0, K1,
scratch_reg);
vmalloc_mode = refill_scratch;
diff --git a/drivers/staging/octeon/ethernet-defines.h b/drivers/staging/octeon/ethernet-defines.h
index 07bd2b87f6a0..e898df25b87f 100644
--- a/drivers/staging/octeon/ethernet-defines.h
+++ b/drivers/staging/octeon/ethernet-defines.h
@@ -32,7 +32,7 @@
#define REUSE_SKBUFFS_WITHOUT_FREE 1
#endif
-#define USE_ASYNC_IOBDMA (CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0)
+#define USE_ASYNC_IOBDMA 1
/* Maximum number of SKBs to try to free per xmit packet. */
#define MAX_OUT_QUEUE_DEPTH 1000
--
2.14.3
^ permalink raw reply related
* [PATCH v6 net-next,mips 4/7] staging: octeon: Remove USE_ASYNC_IOBDMA macro.
From: David Daney @ 2017-12-08 0:09 UTC (permalink / raw)
To: linux-mips, ralf, James Hogan, netdev, David S. Miller,
Rob Herring, Mark Rutland
Cc: linux-kernel, Steven J. Hill, devicetree, Andrew Lunn,
Florian Fainelli, Philippe Ombredanne, David Daney
In-Reply-To: <20171208000934.6554-1-david.daney@cavium.com>
Previous patch sets USE_ASYNC_IOBDMA to 1 unconditionally. Remove
USE_ASYNC_IOBDMA from all if statements. Remove dead code caused by
the change.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Daney <david.daney@cavium.com>
---
drivers/staging/octeon/ethernet-defines.h | 6 ---
drivers/staging/octeon/ethernet-rx.c | 25 ++++-----
drivers/staging/octeon/ethernet-tx.c | 85 ++++++++++---------------------
3 files changed, 37 insertions(+), 79 deletions(-)
diff --git a/drivers/staging/octeon/ethernet-defines.h b/drivers/staging/octeon/ethernet-defines.h
index e898df25b87f..21438c804a43 100644
--- a/drivers/staging/octeon/ethernet-defines.h
+++ b/drivers/staging/octeon/ethernet-defines.h
@@ -10,10 +10,6 @@
/*
* A few defines are used to control the operation of this driver:
- * USE_ASYNC_IOBDMA
- * Use asynchronous IO access to hardware. This uses Octeon's asynchronous
- * IOBDMAs to issue IO accesses without stalling. Set this to zero
- * to disable this. Note that IOBDMAs require CVMSEG.
* REUSE_SKBUFFS_WITHOUT_FREE
* Allows the TX path to free an skbuff into the FPA hardware pool. This
* can significantly improve performance for forwarding and bridging, but
@@ -32,8 +28,6 @@
#define REUSE_SKBUFFS_WITHOUT_FREE 1
#endif
-#define USE_ASYNC_IOBDMA 1
-
/* Maximum number of SKBs to try to free per xmit packet. */
#define MAX_OUT_QUEUE_DEPTH 1000
diff --git a/drivers/staging/octeon/ethernet-rx.c b/drivers/staging/octeon/ethernet-rx.c
index 1a44291318ee..dd76c99d5ae0 100644
--- a/drivers/staging/octeon/ethernet-rx.c
+++ b/drivers/staging/octeon/ethernet-rx.c
@@ -201,11 +201,9 @@ static int cvm_oct_poll(struct oct_rx_group *rx_group, int budget)
/* Prefetch cvm_oct_device since we know we need it soon */
prefetch(cvm_oct_device);
- if (USE_ASYNC_IOBDMA) {
- /* Save scratch in case userspace is using it */
- CVMX_SYNCIOBDMA;
- old_scratch = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
- }
+ /* Save scratch in case userspace is using it */
+ CVMX_SYNCIOBDMA;
+ old_scratch = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
/* Only allow work for our group (and preserve priorities) */
if (OCTEON_IS_MODEL(OCTEON_CN68XX)) {
@@ -220,10 +218,8 @@ static int cvm_oct_poll(struct oct_rx_group *rx_group, int budget)
BIT(rx_group->group));
}
- if (USE_ASYNC_IOBDMA) {
- cvmx_pow_work_request_async(CVMX_SCR_SCRATCH, CVMX_POW_NO_WAIT);
- did_work_request = 1;
- }
+ cvmx_pow_work_request_async(CVMX_SCR_SCRATCH, CVMX_POW_NO_WAIT);
+ did_work_request = 1;
while (rx_count < budget) {
struct sk_buff *skb = NULL;
@@ -232,7 +228,7 @@ static int cvm_oct_poll(struct oct_rx_group *rx_group, int budget)
cvmx_wqe_t *work;
int port;
- if (USE_ASYNC_IOBDMA && did_work_request)
+ if (did_work_request)
work = cvmx_pow_work_response_async(CVMX_SCR_SCRATCH);
else
work = cvmx_pow_work_request_sync(CVMX_POW_NO_WAIT);
@@ -260,7 +256,7 @@ static int cvm_oct_poll(struct oct_rx_group *rx_group, int budget)
sizeof(void *));
prefetch(pskb);
- if (USE_ASYNC_IOBDMA && rx_count < (budget - 1)) {
+ if (rx_count < (budget - 1)) {
cvmx_pow_work_request_async_nocheck(CVMX_SCR_SCRATCH,
CVMX_POW_NO_WAIT);
did_work_request = 1;
@@ -403,10 +399,9 @@ static int cvm_oct_poll(struct oct_rx_group *rx_group, int budget)
cvmx_write_csr(CVMX_POW_PP_GRP_MSKX(coreid), old_group_mask);
}
- if (USE_ASYNC_IOBDMA) {
- /* Restore the scratch area */
- cvmx_scratch_write64(CVMX_SCR_SCRATCH, old_scratch);
- }
+ /* Restore the scratch area */
+ cvmx_scratch_write64(CVMX_SCR_SCRATCH, old_scratch);
+
cvm_oct_rx_refill_pool(0);
return rx_count;
diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c
index 31f35025d19e..2eede0907924 100644
--- a/drivers/staging/octeon/ethernet-tx.c
+++ b/drivers/staging/octeon/ethernet-tx.c
@@ -179,23 +179,18 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
qos = 0;
}
- if (USE_ASYNC_IOBDMA) {
- /* Save scratch in case userspace is using it */
- CVMX_SYNCIOBDMA;
- old_scratch = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
- old_scratch2 = cvmx_scratch_read64(CVMX_SCR_SCRATCH + 8);
-
- /*
- * Fetch and increment the number of packets to be
- * freed.
- */
- cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH + 8,
- FAU_NUM_PACKET_BUFFERS_TO_FREE,
- 0);
- cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH,
- priv->fau + qos * 4,
- MAX_SKB_TO_FREE);
- }
+ /* Save scratch in case userspace is using it */
+ CVMX_SYNCIOBDMA;
+ old_scratch = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
+ old_scratch2 = cvmx_scratch_read64(CVMX_SCR_SCRATCH + 8);
+
+ /* Fetch and increment the number of packets to be freed. */
+ cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH + 8,
+ FAU_NUM_PACKET_BUFFERS_TO_FREE,
+ 0);
+ cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH,
+ priv->fau + qos * 4,
+ MAX_SKB_TO_FREE);
/*
* We have space for 6 segment pointers, If there will be more
@@ -204,22 +199,11 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
if (unlikely(skb_shinfo(skb)->nr_frags > 5)) {
if (unlikely(__skb_linearize(skb))) {
queue_type = QUEUE_DROP;
- if (USE_ASYNC_IOBDMA) {
- /*
- * Get the number of skbuffs in use
- * by the hardware
- */
- CVMX_SYNCIOBDMA;
- skb_to_free =
- cvmx_scratch_read64(CVMX_SCR_SCRATCH);
- } else {
- /*
- * Get the number of skbuffs in use
- * by the hardware
- */
- skb_to_free = cvmx_fau_fetch_and_add32(
- priv->fau + qos * 4, MAX_SKB_TO_FREE);
- }
+ /* Get the number of skbuffs in use by the
+ * hardware
+ */
+ CVMX_SYNCIOBDMA;
+ skb_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free,
priv->fau +
qos * 4);
@@ -387,18 +371,10 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
pko_command.s.ipoffp1 = skb_network_offset(skb) + 1;
}
- if (USE_ASYNC_IOBDMA) {
- /* Get the number of skbuffs in use by the hardware */
- CVMX_SYNCIOBDMA;
- skb_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
- buffers_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH + 8);
- } else {
- /* Get the number of skbuffs in use by the hardware */
- skb_to_free = cvmx_fau_fetch_and_add32(priv->fau + qos * 4,
- MAX_SKB_TO_FREE);
- buffers_to_free =
- cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0);
- }
+ /* Get the number of skbuffs in use by the hardware */
+ CVMX_SYNCIOBDMA;
+ skb_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
+ buffers_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH + 8);
skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free,
priv->fau + qos * 4);
@@ -416,9 +392,7 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
} else {
queue_type = QUEUE_HW;
}
- if (USE_ASYNC_IOBDMA)
- cvmx_fau_async_fetch_and_add32(
- CVMX_SCR_SCRATCH, FAU_TOTAL_TX_TO_CLEAN, 1);
+ cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH, FAU_TOTAL_TX_TO_CLEAN, 1);
spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
@@ -488,16 +462,11 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
dev_kfree_skb_any(t);
}
- if (USE_ASYNC_IOBDMA) {
- CVMX_SYNCIOBDMA;
- total_to_clean = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
- /* Restore the scratch area */
- cvmx_scratch_write64(CVMX_SCR_SCRATCH, old_scratch);
- cvmx_scratch_write64(CVMX_SCR_SCRATCH + 8, old_scratch2);
- } else {
- total_to_clean = cvmx_fau_fetch_and_add32(
- FAU_TOTAL_TX_TO_CLEAN, 1);
- }
+ CVMX_SYNCIOBDMA;
+ total_to_clean = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
+ /* Restore the scratch area */
+ cvmx_scratch_write64(CVMX_SCR_SCRATCH, old_scratch);
+ cvmx_scratch_write64(CVMX_SCR_SCRATCH + 8, old_scratch2);
if (total_to_clean & 0x3ff) {
/*
--
2.14.3
^ permalink raw reply related
* [PATCH v6 net-next,mips 5/7] MIPS: Octeon: Add a global resource manager.
From: David Daney @ 2017-12-08 0:09 UTC (permalink / raw)
To: linux-mips, ralf, James Hogan, netdev, David S. Miller,
Rob Herring, Mark Rutland
Cc: linux-kernel, Steven J. Hill, devicetree, Andrew Lunn,
Florian Fainelli, Philippe Ombredanne, Carlos Munoz,
Steven J . Hill, David Daney
In-Reply-To: <20171208000934.6554-1-david.daney@cavium.com>
From: Carlos Munoz <cmunoz@cavium.com>
Add a global resource manager to manage tagged pointers within
bootmem allocated memory. This is used by various functional
blocks in the Octeon core like the FPA, Ethernet nexus, etc.
Signed-off-by: Carlos Munoz <cmunoz@cavium.com>
Signed-off-by: Steven J. Hill <Steven.Hill@cavium.com>
Signed-off-by: David Daney <david.daney@cavium.com>
---
arch/mips/cavium-octeon/Makefile | 1 +
arch/mips/cavium-octeon/resource-mgr.c | 351 +++++++++++++++++++++++++++++++++
arch/mips/include/asm/octeon/octeon.h | 18 ++
3 files changed, 370 insertions(+)
create mode 100644 arch/mips/cavium-octeon/resource-mgr.c
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index 7c02e542959a..28c0bb75d1a4 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -10,6 +10,7 @@
#
obj-y := cpu.o setup.o octeon-platform.o octeon-irq.o csrc-octeon.o
+obj-y += resource-mgr.o
obj-y += dma-octeon.o
obj-y += octeon-memcpy.o
obj-y += executive/
diff --git a/arch/mips/cavium-octeon/resource-mgr.c b/arch/mips/cavium-octeon/resource-mgr.c
new file mode 100644
index 000000000000..74efda5420ff
--- /dev/null
+++ b/arch/mips/cavium-octeon/resource-mgr.c
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Resource manager for Octeon.
+ *
+ * Copyright (C) 2017 Cavium, Inc.
+ */
+#include <linux/module.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-bootmem.h>
+
+#define RESOURCE_MGR_BLOCK_NAME "cvmx-global-resources"
+#define MAX_RESOURCES 128
+#define INST_AVAILABLE -88
+#define OWNER 0xbadc0de
+
+struct global_resource_entry {
+ struct global_resource_tag tag;
+ u64 phys_addr;
+ u64 size;
+};
+
+struct global_resources {
+#ifdef __LITTLE_ENDIAN_BITFIELD
+ u32 rlock;
+ u32 pad;
+#else
+ u32 pad;
+ u32 rlock;
+#endif
+ u64 entry_cnt;
+ struct global_resource_entry resource_entry[];
+};
+
+static struct global_resources *res_mgr_info;
+
+
+/*
+ * The resource manager interacts with software running outside of the
+ * Linux kernel, which necessitates locking to maintain data structure
+ * consistency. These custom locking functions implement the locking
+ * protocol, and cannot be replaced by kernel locking functions that
+ * may use different in-memory structures.
+ */
+
+static void res_mgr_lock(void)
+{
+ while (cmpxchg(&res_mgr_info->rlock, 0, 1))
+ ; /* Loop while not zero */
+ rmb();
+}
+
+static void res_mgr_unlock(void)
+{
+ /* Wait until all resource operations finish before unlocking. */
+ wmb();
+ WRITE_ONCE(res_mgr_info->rlock, 0);
+ /* Force a write buffer flush. */
+ wmb();
+}
+
+static int res_mgr_find_resource(struct global_resource_tag tag)
+{
+ struct global_resource_entry *res_entry;
+ int i;
+
+ for (i = 0; i < res_mgr_info->entry_cnt; i++) {
+ res_entry = &res_mgr_info->resource_entry[i];
+ if (res_entry->tag.lo == tag.lo && res_entry->tag.hi == tag.hi)
+ return i;
+ }
+ return -1;
+}
+
+/**
+ * res_mgr_create_resource() - Create a resource.
+ * @tag: Identifies the resource.
+ * @inst_cnt: Number of resource instances to create.
+ *
+ * Returns 0 if the source was created successfully.
+ * Returns < 0 for error codes.
+ */
+int res_mgr_create_resource(struct global_resource_tag tag, int inst_cnt)
+{
+ struct global_resource_entry *res_entry;
+ u64 size;
+ u64 *res_addr;
+ int res_index, i, rc = 0;
+
+ res_mgr_lock();
+
+ /* Make sure resource doesn't already exist. */
+ res_index = res_mgr_find_resource(tag);
+ if (res_index >= 0) {
+ rc = -EEXIST;
+ goto err;
+ }
+
+ if (res_mgr_info->entry_cnt >= MAX_RESOURCES) {
+ pr_err("Resource max limit reached, not created\n");
+ rc = -ENOSPC;
+ goto err;
+ }
+
+ /*
+ * Each instance is kept in an array of u64s. The first array element
+ * holds the number of allocated instances.
+ */
+ size = sizeof(u64) * (inst_cnt + 1);
+ res_addr = cvmx_bootmem_alloc_range(size, CVMX_CACHE_LINE_SIZE, 0, 0);
+ if (!res_addr) {
+ pr_err("Failed to allocate resource. not created\n");
+ rc = -ENOMEM;
+ goto err;
+ }
+
+ /* Initialize the newly created resource. */
+ *res_addr = inst_cnt;
+ for (i = 1; i <= inst_cnt; i++)
+ res_addr[i] = INST_AVAILABLE;
+
+ res_index = res_mgr_info->entry_cnt;
+ res_entry = &res_mgr_info->resource_entry[res_index];
+ res_entry->tag = tag;
+ res_entry->phys_addr = virt_to_phys(res_addr);
+ res_entry->size = size;
+ res_mgr_info->entry_cnt++;
+
+err:
+ res_mgr_unlock();
+
+ return rc;
+}
+EXPORT_SYMBOL(res_mgr_create_resource);
+
+/**
+ * res_mgr_alloc_range() - Allocate a range of resource instances.
+ * @tag: Identifies the resource.
+ * @req_inst: Requested start of instance range to allocate.
+ * Range instances are guaranteed to be sequential
+ * (-1 for don't care).
+ * @req_cnt: Number of instances to allocate.
+ * @use_last_avail: Set to request the last available instance.
+ * @inst: Updated with the allocated instances.
+ *
+ * Returns 0 if the source was created successfully.
+ * Returns < 0 for error codes.
+ */
+int res_mgr_alloc_range(struct global_resource_tag tag, int req_inst,
+ int req_cnt, bool use_last_avail, int *inst)
+{
+ struct global_resource_entry *res_entry;
+ int res_index;
+ u64 *res_addr;
+ u64 inst_cnt;
+ int alloc_cnt, i, rc = -ENOENT;
+
+ /* Start with no instances allocated. */
+ for (i = 0; i < req_cnt; i++)
+ inst[i] = INST_AVAILABLE;
+
+ res_mgr_lock();
+
+ /* Find the resource. */
+ res_index = res_mgr_find_resource(tag);
+ if (res_index < 0) {
+ pr_err("Resource not found, can't allocate instance\n");
+ goto err;
+ }
+
+ /* Get resource data. */
+ res_entry = &res_mgr_info->resource_entry[res_index];
+ res_addr = phys_to_virt(res_entry->phys_addr);
+ inst_cnt = *res_addr;
+
+ /* Allocate the requested instances. */
+ if (req_inst >= 0) {
+ /* Specific instance range requested. */
+ if (req_inst + req_cnt >= inst_cnt) {
+ pr_err("Requested instance out of range\n");
+ goto err;
+ }
+
+ for (i = 0; i < req_cnt; i++) {
+ if (*(res_addr + req_inst + 1 + i) == INST_AVAILABLE) {
+ inst[i] = req_inst + i;
+ } else {
+ inst[0] = INST_AVAILABLE;
+ break;
+ }
+ }
+ } else if (use_last_avail) {
+ /* Last available instance requested. */
+ alloc_cnt = 0;
+ for (i = inst_cnt; i > 0; i--) {
+ if (*(res_addr + i) == INST_AVAILABLE) {
+ /*
+ * Instance off by 1 (first element holds the
+ * count).
+ */
+ inst[alloc_cnt] = i - 1;
+
+ alloc_cnt++;
+ if (alloc_cnt == req_cnt)
+ break;
+ }
+ }
+
+ if (i == 0)
+ inst[0] = INST_AVAILABLE;
+ } else {
+ /* Next available instance requested. */
+ alloc_cnt = 0;
+ for (i = 1; i <= inst_cnt; i++) {
+ if (*(res_addr + i) == INST_AVAILABLE) {
+ /*
+ * Instance off by 1 (first element holds the
+ * count).
+ */
+ inst[alloc_cnt] = i - 1;
+
+ alloc_cnt++;
+ if (alloc_cnt == req_cnt)
+ break;
+ }
+ }
+
+ if (i > inst_cnt)
+ inst[0] = INST_AVAILABLE;
+ }
+
+ if (inst[0] != INST_AVAILABLE) {
+ for (i = 0; i < req_cnt; i++)
+ *(res_addr + inst[i] + 1) = OWNER;
+ rc = 0;
+ }
+
+err:
+ res_mgr_unlock();
+
+ return rc;
+}
+EXPORT_SYMBOL(res_mgr_alloc_range);
+
+/**
+ * res_mgr_alloc() - Allocate a resource instance.
+ * @tag: Identifies the resource.
+ * @req_inst: Requested instance to allocate (-1 for don't care).
+ * @use_last_avail: Set to request the last available instance.
+ *
+ * Returns: Allocated resource instance if successful.
+ * Returns <0 for error codes.
+ */
+int res_mgr_alloc(struct global_resource_tag tag, int req_inst,
+ bool use_last_avail)
+{
+ int inst, rc;
+
+ rc = res_mgr_alloc_range(tag, req_inst, 1, use_last_avail, &inst);
+ if (!rc)
+ return inst;
+ return rc;
+}
+EXPORT_SYMBOL(res_mgr_alloc);
+
+/**
+ * res_mgr_free_range() - Free a resource instance range.
+ * @tag: Identifies the resource.
+ * @inst: Requested instance to free.
+ * @req_cnt: Number of instances to free.
+ */
+void res_mgr_free_range(struct global_resource_tag tag, const int *inst,
+ int req_cnt)
+{
+ struct global_resource_entry *res_entry;
+ int res_index, i;
+ u64 *res_addr;
+
+ res_mgr_lock();
+
+ /* Find the resource. */
+ res_index = res_mgr_find_resource(tag);
+ if (res_index < 0) {
+ pr_err("Resource not found, can't free instance\n");
+ goto err;
+ }
+
+ /* Get the resource data. */
+ res_entry = &res_mgr_info->resource_entry[res_index];
+ res_addr = phys_to_virt(res_entry->phys_addr);
+
+ /* Free the resource instances. */
+ for (i = 0; i < req_cnt; i++) {
+ /* Instance off by 1 (first element holds the count). */
+ *(res_addr + inst[i] + 1) = INST_AVAILABLE;
+ }
+
+err:
+ res_mgr_unlock();
+}
+EXPORT_SYMBOL(res_mgr_free_range);
+
+/**
+ * res_mgr_free() - Free a resource instance.
+ * @tag: Identifies the resource.
+ * @req_inst: Requested instance to free.
+ */
+void res_mgr_free(struct global_resource_tag tag, int inst)
+{
+ res_mgr_free_range(tag, &inst, 1);
+}
+EXPORT_SYMBOL(res_mgr_free);
+
+static int __init res_mgr_init(void)
+{
+ struct cvmx_bootmem_named_block_desc *block;
+ int block_size;
+ u64 addr;
+
+ cvmx_bootmem_lock();
+
+ /* Search for the resource manager data in boot memory. */
+ block = cvmx_bootmem_phy_named_block_find(RESOURCE_MGR_BLOCK_NAME,
+ CVMX_BOOTMEM_FLAG_NO_LOCKING);
+ if (block) {
+ /* Found. */
+ res_mgr_info = phys_to_virt(block->base_addr);
+ } else {
+ /* Create it. */
+ block_size = sizeof(struct global_resources) +
+ sizeof(struct global_resource_entry) * MAX_RESOURCES;
+ addr = cvmx_bootmem_phy_named_block_alloc(block_size, 0, 0,
+ CVMX_CACHE_LINE_SIZE, RESOURCE_MGR_BLOCK_NAME,
+ CVMX_BOOTMEM_FLAG_NO_LOCKING);
+ if (!addr) {
+ pr_err("Failed to allocate name block %s\n",
+ RESOURCE_MGR_BLOCK_NAME);
+ } else {
+ res_mgr_info = phys_to_virt(addr);
+ memset(res_mgr_info, 0, block_size);
+ }
+ }
+
+ cvmx_bootmem_unlock();
+
+ return 0;
+}
+device_initcall(res_mgr_init);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cavium, Inc. Octeon resource manager");
diff --git a/arch/mips/include/asm/octeon/octeon.h b/arch/mips/include/asm/octeon/octeon.h
index f01af2469874..4dafeaf262b5 100644
--- a/arch/mips/include/asm/octeon/octeon.h
+++ b/arch/mips/include/asm/octeon/octeon.h
@@ -346,6 +346,24 @@ void octeon_mult_restore3_end(void);
void octeon_mult_restore2(void);
void octeon_mult_restore2_end(void);
+/*
+ * This definition must be kept in sync with the one in
+ * cvmx-global-resources.c
+ */
+struct global_resource_tag {
+ uint64_t lo;
+ uint64_t hi;
+};
+
+void res_mgr_free(struct global_resource_tag tag, int inst);
+void res_mgr_free_range(struct global_resource_tag tag, const int *inst,
+ int req_cnt);
+int res_mgr_alloc(struct global_resource_tag tag, int req_inst,
+ bool use_last_avail);
+int res_mgr_alloc_range(struct global_resource_tag tag, int req_inst,
+ int req_cnt, bool use_last_avail, int *inst);
+int res_mgr_create_resource(struct global_resource_tag tag, int inst_cnt);
+
/**
* Read a 32bit value from the Octeon NPI register space
*
--
2.14.3
^ permalink raw reply related
* [PATCH v6 net-next,mips 6/7] netdev: octeon-ethernet: Add Cavium Octeon III support.
From: David Daney @ 2017-12-08 0:09 UTC (permalink / raw)
To: linux-mips, ralf, James Hogan, netdev, David S. Miller,
Rob Herring, Mark Rutland
Cc: linux-kernel, Steven J. Hill, devicetree, Andrew Lunn,
Florian Fainelli, Philippe Ombredanne, Carlos Munoz,
Steven J . Hill, David Daney
In-Reply-To: <20171208000934.6554-1-david.daney@cavium.com>
From: Carlos Munoz <cmunoz@cavium.com>
The Cavium OCTEON cn78xx and cn73xx SoCs have network packet I/O
hardware that is significantly different from previous generations of
the family.
Add a new driver for this hardware. The Ethernet MAC is called BGX on
these devices. Common code for the MAC is in octeon3-bgx-port.c.
Four of these BGX MACs are grouped together and managed as a group by
octeon3-bgx-nexus.c. Ingress packet classification is done by the PKI
unit initialized in octeon3-pki.c. Queue management is done in the
SSO, initialized by octeon3-sso.c. Egress is handled by the PKO,
initialized in octeon3-pko.c.
Hardware memory buffer management is done in octeon3-fpa.c
Signed-off-by: Carlos Munoz <cmunoz@cavium.com>
Signed-off-by: Steven J. Hill <Steven.Hill@cavium.com>
Signed-off-by: David Daney <david.daney@cavium.com>
---
drivers/net/ethernet/cavium/Kconfig | 59 +-
drivers/net/ethernet/cavium/octeon/Makefile | 7 +
.../net/ethernet/cavium/octeon/octeon3-bgx-nexus.c | 417 ++++
.../net/ethernet/cavium/octeon/octeon3-bgx-port.c | 2018 +++++++++++++++++++
drivers/net/ethernet/cavium/octeon/octeon3-core.c | 2079 ++++++++++++++++++++
drivers/net/ethernet/cavium/octeon/octeon3-fpa.c | 358 ++++
drivers/net/ethernet/cavium/octeon/octeon3-pki.c | 823 ++++++++
drivers/net/ethernet/cavium/octeon/octeon3-pko.c | 1688 ++++++++++++++++
drivers/net/ethernet/cavium/octeon/octeon3-sso.c | 301 +++
drivers/net/ethernet/cavium/octeon/octeon3.h | 430 ++++
10 files changed, 8170 insertions(+), 10 deletions(-)
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-bgx-nexus.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-bgx-port.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-core.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-fpa.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-pki.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-pko.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-sso.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3.h
diff --git a/drivers/net/ethernet/cavium/Kconfig b/drivers/net/ethernet/cavium/Kconfig
index 63be75eb34d2..3fadf8940166 100644
--- a/drivers/net/ethernet/cavium/Kconfig
+++ b/drivers/net/ethernet/cavium/Kconfig
@@ -4,7 +4,7 @@
config NET_VENDOR_CAVIUM
bool "Cavium ethernet drivers"
- depends on PCI
+ depends on PCI || CAVIUM_OCTEON_SOC
default y
---help---
Select this option if you want enable Cavium network support.
@@ -13,6 +13,12 @@ config NET_VENDOR_CAVIUM
if NET_VENDOR_CAVIUM
+#
+# The Thunder* and LiquidIO drivers require PCI.
+#
+
+if PCI
+
config THUNDER_NIC_PF
tristate "Thunder Physical function driver"
depends on 64BIT
@@ -64,6 +70,20 @@ config LIQUIDIO
To compile this driver as a module, choose M here: the module
will be called liquidio. This is recommended.
+config LIQUIDIO_VF
+ tristate "Cavium LiquidIO VF support"
+ depends on 64BIT && PCI_MSI
+ imply PTP_1588_CLOCK
+ ---help---
+ This driver supports Cavium LiquidIO Intelligent Server Adapter
+ based on CN23XX chips.
+
+ To compile this driver as a module, choose M here: The module
+ will be called liquidio_vf. MSI-X interrupt support is required
+ for this driver to work correctly
+
+endif # PCI
+
config OCTEON_MGMT_ETHERNET
tristate "Octeon Management port ethernet driver (CN5XXX, CN6XXX)"
depends on CAVIUM_OCTEON_SOC
@@ -75,16 +95,35 @@ config OCTEON_MGMT_ETHERNET
port on Cavium Networks' Octeon CN57XX, CN56XX, CN55XX,
CN54XX, CN52XX, and CN6XXX chips.
-config LIQUIDIO_VF
- tristate "Cavium LiquidIO VF support"
- depends on 64BIT && PCI_MSI
- imply PTP_1588_CLOCK
+config OCTEON_FPA3
+ tristate
+ depends on CAVIUM_OCTEON_SOC
+
+config OCTEON3_BGX_NEXUS
+ tristate
+ depends on CAVIUM_OCTEON_SOC
+
+config OCTEON3_BGX_PORT
+ tristate "Cavium OCTEON-III BGX port support"
+ depends on CAVIUM_OCTEON_SOC
+ select OCTEON3_BGX_NEXUS
---help---
- This driver supports Cavium LiquidIO Intelligent Server Adapter
- based on CN23XX chips.
+ Enable the driver for Cavium Octeon III BGX ports. BGX ports
+ support sgmii, rgmii, xaui, rxaui, xlaui, xfi, 10KR and 40KR modes.
- To compile this driver as a module, choose M here: The module
- will be called liquidio_vf. MSI-X interrupt support is required
- for this driver to work correctly
+ Say Y for support of any Octeon III SoC Ethernet port.
+
+config OCTEON3_ETHERNET
+ tristate "Cavium OCTEON-III PKI/PKO Ethernet support"
+ depends on CAVIUM_OCTEON_SOC
+ select OCTEON_BGX_PORT
+ select OCTEON_FPA3
+ select FW_LOADER
+ ---help---
+ Enable the driver for Cavium Octeon III Ethernet via PKI/PKO
+ units. No support for cn70xx chips (use OCTEON_ETHERNET for
+ cn70xx).
+
+ Say Y for support of any Octeon III SoC Ethernet port.
endif # NET_VENDOR_CAVIUM
diff --git a/drivers/net/ethernet/cavium/octeon/Makefile b/drivers/net/ethernet/cavium/octeon/Makefile
index efa41c1d91c5..13efb90aed51 100644
--- a/drivers/net/ethernet/cavium/octeon/Makefile
+++ b/drivers/net/ethernet/cavium/octeon/Makefile
@@ -3,3 +3,10 @@
#
obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon_mgmt.o
+obj-$(CONFIG_OCTEON3_BGX_PORT) += octeon3-bgx-port.o
+obj-$(CONFIG_OCTEON3_BGX_NEXUS) += octeon3-bgx-nexus.o
+obj-$(CONFIG_OCTEON_FPA3) += octeon3-fpa.o
+obj-$(CONFIG_OCTEON3_ETHERNET) += octeon3-ethernet.o
+
+octeon3-ethernet-objs += octeon3-core.o octeon3-pki.o octeon3-sso.o \
+ octeon3-pko.o
diff --git a/drivers/net/ethernet/cavium/octeon/octeon3-bgx-nexus.c b/drivers/net/ethernet/cavium/octeon/octeon3-bgx-nexus.c
new file mode 100644
index 000000000000..bdb489d84b7f
--- /dev/null
+++ b/drivers/net/ethernet/cavium/octeon/octeon3-bgx-nexus.c
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: GPL-2.0
+/* The BGX nexus consists of a group of up to four Ethernet MACs (the
+ * LMACs). This driver manages the LMACs and creates a child device
+ * for each of the configured LMACs.
+ *
+ * Copyright (c) 2017 Cavium, Inc.
+ */
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+
+#include "octeon3.h"
+
+static atomic_t request_mgmt_once;
+static atomic_t load_driver_once;
+static atomic_t pki_id;
+
+#define MAX_MIX_PER_NODE 2
+
+#define MAX_MIX (MAX_NODES * MAX_MIX_PER_NODE)
+
+/**
+ * struct mix_port_lmac - Describes a lmac that connects to a mix
+ * port. The lmac must be on the same node as
+ * the mix.
+ * @node: Node of the lmac.
+ * @bgx: Bgx of the lmac.
+ * @lmac: Lmac index.
+ */
+struct mix_port_lmac {
+ int node;
+ int bgx;
+ int lmac;
+};
+
+/* mix_ports_lmacs contains all the lmacs connected to mix ports */
+static struct mix_port_lmac mix_port_lmacs[MAX_MIX];
+
+/* pki_ports keeps track of the lmacs connected to the pki */
+static bool pki_ports[MAX_NODES][MAX_BGX_PER_NODE][MAX_LMAC_PER_BGX];
+
+/* Created platform devices get added to this list */
+static struct list_head pdev_list;
+static struct mutex pdev_list_lock;
+
+/* Created platform device use this structure to add themselves to the list */
+struct pdev_list_item {
+ struct list_head list;
+ struct platform_device *pdev;
+};
+
+/**
+ * is_lmac_to_mix() - Search the list of lmacs connected to mix'es for a match.
+ * @node: Numa node of lmac to search for.
+ * @bgx: Bgx of lmac to search for.
+ * @lmac: Lmac index to search for.
+ *
+ * Return: true if the lmac is connected to a mix.
+ * false if the lmac is not connected to a mix.
+ */
+static bool is_lmac_to_mix(int node, int bgx, int lmac)
+{
+ int i;
+
+ for (i = 0; i < MAX_MIX; i++) {
+ if (mix_port_lmacs[i].node == node &&
+ mix_port_lmacs[i].bgx == bgx &&
+ mix_port_lmacs[i].lmac == lmac)
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * is_lmac_to_pki() - Search the list of lmacs connected to the pki for a match.
+ * @node: Numa node of lmac to search for.
+ * @bgx: Bgx of lmac to search for.
+ * @lmac: Lmac index to search for.
+ *
+ * Return: true if the lmac is connected to the pki.
+ * false if the lmac is not connected to the pki.
+ */
+static bool is_lmac_to_pki(int node, int bgx, int lmac)
+{
+ return pki_ports[node][bgx][lmac];
+}
+
+/**
+ * is_lmac_to_xcv() - Check if this lmac is connected to the xcv block (rgmii).
+ * @of_node: Device node to check.
+ *
+ * Return: true if the lmac is connected to the xcv port.
+ * false if the lmac is not connected to the xcv port.
+ */
+static bool is_lmac_to_xcv(struct device_node *of_node)
+{
+ return of_device_is_compatible(of_node, "cavium,octeon-7360-xcv");
+}
+
+static int bgx_probe(struct platform_device *pdev)
+{
+ struct mac_platform_data platform_data;
+ struct platform_device *new_dev;
+ struct platform_device *pki_dev;
+ struct device_node *child;
+ const __be32 *reg;
+ int interface;
+ int numa_node;
+ char id[64];
+ int r = 0;
+ u64 addr;
+ u32 port;
+ u64 data;
+ int i;
+
+ reg = of_get_property(pdev->dev.of_node, "reg", NULL);
+ addr = of_translate_address(pdev->dev.of_node, reg);
+ interface = bgx_addr_to_interface(addr);
+ numa_node = bgx_node_to_numa_node(pdev->dev.of_node);
+
+ /* Assign 8 CAM entries per LMAC */
+ for (i = 0; i < 32; i++) {
+ data = i >> 3;
+ oct_csr_write(data, BGX_CMR_RX_ADRX_CAM(numa_node, interface, i));
+ }
+
+ for_each_available_child_of_node(pdev->dev.of_node, child) {
+ struct pdev_list_item *pdev_item;
+ bool is_mix = false;
+ bool is_pki = false;
+ bool is_xcv = false;
+
+ if (!of_device_is_compatible(child, "cavium,octeon-7890-bgx-port") &&
+ !of_device_is_compatible(child, "cavium,octeon-7360-xcv"))
+ continue;
+ r = of_property_read_u32(child, "reg", &port);
+ if (r)
+ return -ENODEV;
+
+ is_mix = is_lmac_to_mix(numa_node, interface, port);
+ is_pki = is_lmac_to_pki(numa_node, interface, port);
+ is_xcv = is_lmac_to_xcv(child);
+
+ /* Check if this port should be configured */
+ if (!is_mix && !is_pki)
+ continue;
+
+ /* Connect to PKI/PKO */
+ data = oct_csr_read(BGX_CMR_CONFIG(numa_node, interface, port));
+ if (is_mix)
+ data |= BIT(11);
+ else
+ data &= ~BIT(11);
+ oct_csr_write(data, BGX_CMR_CONFIG(numa_node, interface, port));
+
+ /* Unreset the mix bgx interface or it will interfare with the
+ * other ports.
+ */
+ if (is_mix) {
+ data = oct_csr_read(BGX_CMR_GLOBAL_CONFIG(numa_node, interface));
+ if (!port)
+ data &= ~BIT(3);
+ else if (port == 1)
+ data &= ~BIT(4);
+ oct_csr_write(data, BGX_CMR_GLOBAL_CONFIG(numa_node, interface));
+ }
+
+ snprintf(id, sizeof(id), "%llx.%u.ethernet-mac",
+ (unsigned long long)addr, port);
+ new_dev = of_platform_device_create(child, id, &pdev->dev);
+ if (!new_dev) {
+ dev_err(&pdev->dev, "Error creating %s\n", id);
+ continue;
+ }
+ platform_data.mac_type = BGX_MAC;
+ platform_data.numa_node = numa_node;
+ platform_data.interface = interface;
+ platform_data.port = port;
+ if (is_xcv)
+ platform_data.src_type = XCV;
+ else
+ platform_data.src_type = QLM;
+
+ /* Add device to the list of created devices so we can
+ * remove it on exit.
+ */
+ pdev_item = kmalloc(sizeof(*pdev_item), GFP_KERNEL);
+ pdev_item->pdev = new_dev;
+ mutex_lock(&pdev_list_lock);
+ list_add(&pdev_item->list, &pdev_list);
+ mutex_unlock(&pdev_list_lock);
+
+ i = atomic_inc_return(&pki_id);
+ pki_dev = platform_device_register_data(&new_dev->dev,
+ is_mix ? "octeon_mgmt" : "ethernet-mac-pki",
+ i, &platform_data,
+ sizeof(platform_data));
+ dev_info(&pdev->dev, "Created %s %u\n",
+ is_mix ? "MIX" : "PKI", pki_dev->id);
+
+ /* Add device to the list of created devices so we can
+ * remove it on exit.
+ */
+ pdev_item = kmalloc(sizeof(*pdev_item), GFP_KERNEL);
+ pdev_item->pdev = pki_dev;
+ mutex_lock(&pdev_list_lock);
+ list_add(&pdev_item->list, &pdev_list);
+ mutex_unlock(&pdev_list_lock);
+
+#ifdef CONFIG_NUMA
+ new_dev->dev.numa_node = pdev->dev.numa_node;
+ pki_dev->dev.numa_node = pdev->dev.numa_node;
+#endif
+ /* One time request driver module */
+ if (is_mix) {
+ if (atomic_cmpxchg(&request_mgmt_once, 0, 1) == 0)
+ request_module_nowait("octeon_mgmt");
+ }
+ if (is_pki) {
+ if (atomic_cmpxchg(&load_driver_once, 0, 1) == 0)
+ request_module_nowait("octeon3-ethernet");
+ }
+ }
+
+ dev_info(&pdev->dev, "Probed\n");
+ return 0;
+}
+
+/**
+ * bgx_mix_init_from_fdt() - Initialize the list of lmacs that connect to mix
+ * ports from information in the device tree.
+ *
+ * Return: 0 if successful.
+ * < 0 for error codes.
+ */
+static int bgx_mix_init_from_fdt(void)
+{
+ struct device_node *parent = NULL;
+ struct device_node *node;
+ int mix = 0;
+
+ for_each_compatible_node(node, NULL, "cavium,octeon-7890-mix") {
+ struct device_node *lmac_fdt_node;
+ const __be32 *reg;
+ u64 addr;
+ u32 t;
+
+ /* Get the fdt node of the lmac connected to this mix */
+ lmac_fdt_node = of_parse_phandle(node, "cavium,mac-handle", 0);
+ if (!lmac_fdt_node)
+ goto err;
+
+ /* Get the numa node and bgx of the lmac */
+ parent = of_get_parent(lmac_fdt_node);
+ if (!parent)
+ goto err;
+ reg = of_get_property(parent, "reg", NULL);
+ if (!reg)
+ goto err;
+ addr = of_translate_address(parent, reg);
+ of_node_put(parent);
+ parent = NULL;
+
+ mix_port_lmacs[mix].node = bgx_node_to_numa_node(parent);
+ mix_port_lmacs[mix].bgx = bgx_addr_to_interface(addr);
+
+ /* Get the lmac index */
+ if (!of_property_read_u32(lmac_fdt_node, "reg", &t))
+ goto err;
+
+ mix_port_lmacs[mix].lmac = t;
+
+ mix++;
+ if (mix >= MAX_MIX)
+ break;
+ }
+
+ return 0;
+ err:
+ pr_warn("Invalid device tree mix port information\n");
+ for (mix = 0; mix < MAX_MIX; mix++) {
+ mix_port_lmacs[mix].node = -1;
+ mix_port_lmacs[mix].bgx = -1;
+ mix_port_lmacs[mix].lmac = -1;
+ }
+ if (parent)
+ of_node_put(parent);
+
+ return -EINVAL;
+}
+
+/**
+ * bgx_mix_port_lmacs_init() - Initialize the mix_port_lmacs variable with the
+ * lmacs that connect to mix ports.
+ *
+ * Return: 0 if successful.
+ * < 0 for error codes.
+ */
+static int bgx_mix_port_lmacs_init(void)
+{
+ int mix;
+
+ /* Start with no mix ports configured */
+ for (mix = 0; mix < MAX_MIX; mix++) {
+ mix_port_lmacs[mix].node = -1;
+ mix_port_lmacs[mix].bgx = -1;
+ mix_port_lmacs[mix].lmac = -1;
+ }
+
+ /* Configure the mix ports using information from the device tree if no
+ * parameter was passed. Otherwise, use the information in the module
+ * parameter.
+ */
+ bgx_mix_init_from_fdt();
+
+ return 0;
+}
+
+/**
+ * bgx_pki_ports_init() - Initialize the pki_ports variable with the lmacs that
+ * connect to the pki.
+ *
+ * Returns 0 if successful.
+ * Returns < 0 for error codes.
+ */
+static int bgx_pki_ports_init(void)
+{
+ int i;
+ int j;
+ int k;
+
+ for (i = 0; i < MAX_NODES; i++) {
+ for (j = 0; j < MAX_BGX_PER_NODE; j++) {
+ for (k = 0; k < MAX_LMAC_PER_BGX; k++)
+ pki_ports[i][j][k] = true;
+ }
+ }
+
+ return 0;
+}
+
+static int bgx_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static void bgx_shutdown(struct platform_device *pdev)
+{
+}
+
+static const struct of_device_id bgx_match[] = {
+ {
+ .compatible = "cavium,octeon-7890-bgx",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, bgx_match);
+
+static struct platform_driver bgx_driver = {
+ .probe = bgx_probe,
+ .remove = bgx_remove,
+ .shutdown = bgx_shutdown,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = KBUILD_MODNAME,
+ .of_match_table = bgx_match,
+ },
+};
+
+/* Allow bgx_port driver to force this driver to load */
+void bgx_nexus_load(void)
+{
+}
+EXPORT_SYMBOL(bgx_nexus_load);
+
+static int __init bgx_driver_init(void)
+{
+ int r;
+
+ INIT_LIST_HEAD(&pdev_list);
+ mutex_init(&pdev_list_lock);
+
+ bgx_mix_port_lmacs_init();
+ bgx_pki_ports_init();
+
+ r = platform_driver_register(&bgx_driver);
+
+ return r;
+}
+
+static void __exit bgx_driver_exit(void)
+{
+ struct pdev_list_item *pdev_item;
+
+ mutex_lock(&pdev_list_lock);
+ while (!list_empty(&pdev_list)) {
+ pdev_item = list_first_entry(&pdev_list,
+ struct pdev_list_item, list);
+ list_del(&pdev_item->list);
+ platform_device_unregister(pdev_item->pdev);
+ kfree(pdev_item);
+ }
+ mutex_unlock(&pdev_list_lock);
+
+ platform_driver_unregister(&bgx_driver);
+}
+
+module_init(bgx_driver_init);
+module_exit(bgx_driver_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cavium, Inc. <support@caviumnetworks.com>");
+MODULE_DESCRIPTION("Cavium, Inc. BGX MAC Nexus driver.");
diff --git a/drivers/net/ethernet/cavium/octeon/octeon3-bgx-port.c b/drivers/net/ethernet/cavium/octeon/octeon3-bgx-port.c
new file mode 100644
index 000000000000..72bcb66a516d
--- /dev/null
+++ b/drivers/net/ethernet/cavium/octeon/octeon3-bgx-port.c
@@ -0,0 +1,2018 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2017 Cavium, Inc.
+ *
+ * The BGX port (LMAC) is a single Ethernet MAC that may be assigned
+ * to either the octeon3-ethernet packet processor or the octeon_mgmt
+ * packet processor.
+ */
+#include <linux/platform_device.h>
+#include <linux/etherdevice.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/netdevice.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+
+#include <asm/octeon/octeon.h>
+
+#include "octeon3.h"
+
+struct bgx_port_priv {
+ int node;
+ int bgx;
+ int index; /* Port index on BGX block*/
+ enum port_mode mode;
+ int pknd;
+ int qlm;
+ const u8 *mac_addr;
+ struct phy_device *phydev;
+ struct device_node *phy_np;
+ int phy_mode;
+ bool mode_1000basex;
+ bool bgx_as_phy;
+ struct net_device *netdev;
+ struct mutex lock; /* Serializes delayed work */
+ struct port_status (*get_link)(struct bgx_port_priv *priv);
+ int (*set_link)(struct bgx_port_priv *priv, struct port_status status);
+ struct port_status last_status;
+ struct delayed_work dwork;
+ bool work_queued;
+};
+
+/* lmac_pknd keeps track of the port kinds assigned to the lmacs */
+static int lmac_pknd[MAX_NODES][MAX_BGX_PER_NODE][MAX_LMAC_PER_BGX];
+
+static struct workqueue_struct *check_state_wq;
+static DEFINE_MUTEX(check_state_wq_mutex);
+
+int bgx_port_get_qlm(int node, int bgx, int index)
+{
+ int qlm = -1;
+ u64 data;
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX)) {
+ if (bgx < 2) {
+ data = oct_csr_read(BGX_CMR_GLOBAL_CONFIG(node, bgx));
+ if (data & 1)
+ qlm = bgx + 2;
+ else
+ qlm = bgx;
+ } else {
+ qlm = bgx + 2;
+ }
+ } else if (OCTEON_IS_MODEL(OCTEON_CN73XX)) {
+ if (bgx < 2) {
+ qlm = bgx + 2;
+ } else {
+ /* Ports on bgx2 can be connected to qlm5 or qlm6 */
+ if (index < 2)
+ qlm = 5;
+ else
+ qlm = 6;
+ }
+ } else if (OCTEON_IS_MODEL(OCTEON_CNF75XX)) {
+ /* Ports on bgx0 can be connected to qlm4 or qlm5 */
+ if (index < 2)
+ qlm = 4;
+ else
+ qlm = 5;
+ }
+
+ return qlm;
+}
+EXPORT_SYMBOL(bgx_port_get_qlm);
+
+/* Returns the mode of the bgx port */
+enum port_mode bgx_port_get_mode(int node, int bgx, int index)
+{
+ enum port_mode mode;
+ u64 data;
+
+ data = oct_csr_read(BGX_CMR_CONFIG(node, bgx, index));
+
+ switch ((data >> 8) & 7) {
+ case 0:
+ mode = PORT_MODE_SGMII;
+ break;
+ case 1:
+ mode = PORT_MODE_XAUI;
+ break;
+ case 2:
+ mode = PORT_MODE_RXAUI;
+ break;
+ case 3:
+ data = oct_csr_read(BGX_SPU_BR_PMD_CONTROL(node, bgx, index));
+ /* The use of training differentiates 10G_KR from xfi */
+ if (data & BIT(1))
+ mode = PORT_MODE_10G_KR;
+ else
+ mode = PORT_MODE_XFI;
+ break;
+ case 4:
+ data = oct_csr_read(BGX_SPU_BR_PMD_CONTROL(node, bgx, index));
+ /* The use of training differentiates 40G_KR4 from xlaui */
+ if (data & BIT(1))
+ mode = PORT_MODE_40G_KR4;
+ else
+ mode = PORT_MODE_XLAUI;
+ break;
+ case 5:
+ mode = PORT_MODE_RGMII;
+ break;
+ default:
+ mode = PORT_MODE_DISABLED;
+ break;
+ }
+
+ return mode;
+}
+EXPORT_SYMBOL(bgx_port_get_mode);
+
+int bgx_port_allocate_pknd(int node)
+{
+ struct global_resource_tag tag;
+ char buf[16];
+ int pknd;
+
+ strncpy((char *)&tag.lo, "cvm_pknd", 8);
+ snprintf(buf, 16, "_%d......", node);
+ memcpy(&tag.hi, buf, 8);
+
+ res_mgr_create_resource(tag, 64);
+ pknd = res_mgr_alloc(tag, -1, false);
+ if (pknd < 0) {
+ pr_err("bgx-port: Failed to allocate pknd\n");
+ return -ENODEV;
+ }
+
+ return pknd;
+}
+EXPORT_SYMBOL(bgx_port_allocate_pknd);
+
+int bgx_port_get_pknd(int node, int bgx, int index)
+{
+ return lmac_pknd[node][bgx][index];
+}
+EXPORT_SYMBOL(bgx_port_get_pknd);
+
+/* GSER-20075 */
+static void bgx_port_gser_20075(struct bgx_port_priv *priv, int qlm, int lane)
+{
+ u64 addr;
+ u64 data;
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) &&
+ (lane == -1 || lane == 3)) {
+ /* Enable software control */
+ addr = GSER_BR_RX_CTL(priv->node, qlm, 3);
+ data = oct_csr_read(addr);
+ data |= BIT(2);
+ oct_csr_write(data, addr);
+
+ /* Clear the completion flag */
+ addr = GSER_BR_RX_EER(priv->node, qlm, 3);
+ data = oct_csr_read(addr);
+ data &= ~BIT(14);
+ oct_csr_write(data, addr);
+
+ /* Initiate a new request on lane 2 */
+ if (lane == 3) {
+ addr = GSER_BR_RX_EER(priv->node, qlm, 2);
+ data = oct_csr_read(addr);
+ data |= BIT(15);
+ oct_csr_write(data, addr);
+ }
+ }
+}
+
+static void bgx_common_init_pknd(struct bgx_port_priv *priv)
+{
+ int num_ports;
+ u64 data;
+
+ /* Setup pkind */
+ priv->pknd = bgx_port_allocate_pknd(priv->node);
+ lmac_pknd[priv->node][priv->bgx][priv->index] = priv->pknd;
+ data = oct_csr_read(BGX_CMR_RX_ID_MAP(priv->node, priv->bgx, priv->index));
+ data &= ~GENMASK_ULL(7, 0);
+ data |= priv->pknd;
+ if (OCTEON_IS_MODEL(OCTEON_CN73XX)) {
+ /* Change the default reassembly id (max allowed is 14) */
+ data &= ~GENMASK_ULL(14, 8);
+ data |= ((4 * priv->bgx) + 2 + priv->index) << 8;
+ }
+ oct_csr_write(data, BGX_CMR_RX_ID_MAP(priv->node, priv->bgx, priv->index));
+
+ /* Set backpressure channel mask AND/OR registers */
+ data = oct_csr_read(BGX_CMR_CHAN_MSK_AND(priv->node, priv->bgx));
+ data |= 0xffff << (16 * priv->index);
+ oct_csr_write(data, BGX_CMR_CHAN_MSK_AND(priv->node, priv->bgx));
+
+ data = oct_csr_read(BGX_CMR_CHAN_MSK_OR(priv->node, priv->bgx));
+ data |= 0xffff << (16 * priv->index);
+ oct_csr_write(data, BGX_CMR_CHAN_MSK_OR(priv->node, priv->bgx));
+
+ /* Rx back pressure watermark:
+ * Set to 1/4 of the available lmacs buffer (in multiple of 16 bytes)
+ */
+ data = oct_csr_read(BGX_CMR_TX_LMACS(priv->node, priv->bgx));
+ num_ports = data & 7;
+ data = BGX_RX_FIFO_SIZE / (num_ports * 4 * 16);
+ oct_csr_write(data, BGX_CMR_RX_BP_ON(priv->node, priv->bgx, priv->index));
+}
+
+static int bgx_xgmii_hardware_init(struct bgx_port_priv *priv)
+{
+ u64 clock_mhz;
+ u64 data;
+ u64 ctl;
+
+ /* Set TX Threshold */
+ data = 0x20;
+ oct_csr_write(data, BGX_GMP_GMI_TX_THRESH(priv->node, priv->bgx, priv->index));
+
+ data = oct_csr_read(BGX_GMP_PCS_MISC_CTL(priv->node, priv->bgx, priv->index));
+ data &= ~(BIT(8) | BIT(9));
+ if (priv->mode_1000basex)
+ data |= BIT(8);
+ if (priv->bgx_as_phy)
+ data |= BIT(9);
+ oct_csr_write(data, BGX_GMP_PCS_MISC_CTL(priv->node, priv->bgx, priv->index));
+
+ data = oct_csr_read(BGX_GMP_PCS_LINK_TIMER(priv->node, priv->bgx, priv->index));
+ clock_mhz = octeon_get_io_clock_rate() / 1000000;
+ if (priv->mode_1000basex)
+ data = (10000ull * clock_mhz) >> 10;
+ else
+ data = (1600ull * clock_mhz) >> 10;
+ oct_csr_write(data, BGX_GMP_PCS_LINK_TIMER(priv->node, priv->bgx, priv->index));
+
+ if (priv->mode_1000basex) {
+ data = oct_csr_read(BGX_GMP_PCS_AN_ADV(priv->node, priv->bgx, priv->index));
+ data &= ~(GENMASK_ULL(13, 12) | GENMASK_ULL(8, 7));
+ data |= 3 << 7;
+ data |= BIT(6) | BIT(5);
+ oct_csr_write(data, BGX_GMP_PCS_AN_ADV(priv->node, priv->bgx, priv->index));
+ } else if (priv->bgx_as_phy) {
+ data = oct_csr_read(BGX_GMP_PCS_SGM_AN_ADV(priv->node, priv->bgx, priv->index));
+ data |= BIT(12);
+ data &= ~(GENMASK_ULL(11, 10));
+ data |= 2 << 10;
+ oct_csr_write(data, BGX_GMP_PCS_SGM_AN_ADV(priv->node, priv->bgx, priv->index));
+ }
+
+ data = oct_csr_read(BGX_GMP_GMI_TX_APPEND(priv->node, priv->bgx, priv->index));
+ ctl = oct_csr_read(BGX_GMP_GMI_TX_SGMII_CTL(priv->node, priv->bgx, priv->index));
+ ctl &= ~BIT(0);
+ ctl |= (data & BIT(0)) ? 0 : 1;
+ oct_csr_write(ctl, BGX_GMP_GMI_TX_SGMII_CTL(priv->node, priv->bgx, priv->index));
+
+ if (priv->mode == PORT_MODE_RGMII) {
+ /* Disable XCV interface when initialized */
+ data = oct_csr_read(XCV_RESET(priv->node));
+ data &= ~(BIT(63) | BIT(3) | BIT(1));
+ oct_csr_write(data, XCV_RESET(priv->node));
+ }
+
+ return 0;
+}
+
+int bgx_get_tx_fifo_size(struct bgx_port_priv *priv)
+{
+ u64 data;
+ int num_ports;
+
+ data = oct_csr_read(BGX_CMR_TX_LMACS(priv->node, priv->bgx));
+ num_ports = data & 7;
+
+ switch (num_ports) {
+ case 1:
+ return BGX_TX_FIFO_SIZE;
+ case 2:
+ return BGX_TX_FIFO_SIZE / 2;
+ case 3:
+ case 4:
+ return BGX_TX_FIFO_SIZE / 4;
+ default:
+ return 0;
+ }
+}
+
+static int bgx_xaui_hardware_init(struct bgx_port_priv *priv)
+{
+ u64 tx_fifo_size;
+ u64 clock_mhz;
+ u64 data;
+
+ if (octeon_is_simulation()) {
+ /* Enable the port */
+ data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+ data |= BIT(15);
+ oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+ } else {
+ /* Reset the port */
+ data = oct_csr_read(BGX_SPU_CONTROL1(priv->node, priv->bgx, priv->index));
+ data |= BIT(15);
+ oct_csr_write(data, BGX_SPU_CONTROL1(priv->node, priv->bgx, priv->index));
+
+ /* Wait for reset to complete */
+ udelay(1);
+ data = oct_csr_read(BGX_SPU_CONTROL1(priv->node, priv->bgx, priv->index));
+ if (data & BIT(15)) {
+ netdev_err(priv->netdev,
+ "BGX%d:%d: SPU stuck in reset\n", priv->bgx, priv->node);
+ return -1;
+ }
+
+ /* Reset the SerDes lanes */
+ data = oct_csr_read(BGX_SPU_CONTROL1(priv->node, priv->bgx, priv->index));
+ data |= BIT(11);
+ oct_csr_write(data, BGX_SPU_CONTROL1(priv->node, priv->bgx, priv->index));
+
+ /* Disable packet reception */
+ data = oct_csr_read(BGX_SPU_MISC_CONTROL(priv->node, priv->bgx, priv->index));
+ data |= BIT(12);
+ oct_csr_write(data, BGX_SPU_MISC_CONTROL(priv->node, priv->bgx, priv->index));
+
+ /* Clear/disable interrupts */
+ data = oct_csr_read(BGX_SMU_RX_INT(priv->node, priv->bgx, priv->index));
+ oct_csr_write(data, BGX_SMU_RX_INT(priv->node, priv->bgx, priv->index));
+ data = oct_csr_read(BGX_SMU_TX_INT(priv->node, priv->bgx, priv->index));
+ oct_csr_write(data, BGX_SMU_TX_INT(priv->node, priv->bgx, priv->index));
+ data = oct_csr_read(BGX_SPU_INT(priv->node, priv->bgx, priv->index));
+ oct_csr_write(data, BGX_SPU_INT(priv->node, priv->bgx, priv->index));
+
+ if ((priv->mode == PORT_MODE_10G_KR ||
+ priv->mode == PORT_MODE_40G_KR4) &&
+ !OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+ oct_csr_write(0, BGX_SPU_BR_PMD_LP_CUP(priv->node, priv->bgx, priv->index));
+ oct_csr_write(0, BGX_SPU_BR_PMD_LD_CUP(priv->node, priv->bgx, priv->index));
+ oct_csr_write(0, BGX_SPU_BR_PMD_LD_REP(priv->node, priv->bgx, priv->index));
+ data = oct_csr_read(BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+ data |= BIT(1);
+ oct_csr_write(data, BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+ }
+ }
+
+ data = oct_csr_read(BGX_SMU_TX_APPEND(priv->node, priv->bgx, priv->index));
+ data |= BIT(3);
+ oct_csr_write(data, BGX_SMU_TX_APPEND(priv->node, priv->bgx, priv->index));
+
+ if (!octeon_is_simulation()) {
+ /* Disable fec */
+ data = oct_csr_read(BGX_SPU_FEC_CONTROL(priv->node, priv->bgx, priv->index));
+ data &= ~BIT(0);
+ oct_csr_write(data, BGX_SPU_FEC_CONTROL(priv->node, priv->bgx, priv->index));
+
+ /* Disable/configure auto negotiation */
+ data = oct_csr_read(BGX_SPU_AN_CONTROL(priv->node, priv->bgx, priv->index));
+ data &= ~(BIT(13) | BIT(12));
+ oct_csr_write(data, BGX_SPU_AN_CONTROL(priv->node, priv->bgx, priv->index));
+
+ data = oct_csr_read(BGX_SPU_AN_ADV(priv->node, priv->bgx, priv->index));
+ data &= ~(BIT(47) | BIT(26) | BIT(25) | BIT(22) | BIT(21) |
+ BIT(13) | BIT(12));
+ data |= BIT(46);
+ if (priv->mode == PORT_MODE_40G_KR4)
+ data |= BIT(24);
+ else
+ data &= ~BIT(24);
+ if (priv->mode == PORT_MODE_10G_KR)
+ data |= BIT(23);
+ else
+ data &= ~BIT(23);
+ oct_csr_write(data, BGX_SPU_AN_ADV(priv->node, priv->bgx, priv->index));
+
+ data = oct_csr_read(BGX_SPU_DBG_CONTROL(priv->node, priv->bgx));
+ data |= BIT(29);
+ if (priv->mode == PORT_MODE_10G_KR ||
+ priv->mode == PORT_MODE_40G_KR4)
+ data |= BIT(18);
+ else
+ data &= ~BIT(18);
+ oct_csr_write(data, BGX_SPU_DBG_CONTROL(priv->node, priv->bgx));
+
+ /* Enable the port */
+ data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+ data |= BIT(15);
+ oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) && priv->index) {
+ /* BGX-22429 */
+ data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, 0));
+ data |= BIT(15);
+ oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, 0));
+ }
+ }
+
+ data = oct_csr_read(BGX_SPU_CONTROL1(priv->node, priv->bgx, priv->index));
+ data &= ~BIT(11);
+ oct_csr_write(data, BGX_SPU_CONTROL1(priv->node, priv->bgx, priv->index));
+
+ data = oct_csr_read(BGX_SMU_TX_CTL(priv->node, priv->bgx, priv->index));
+ data |= BIT(0);
+ data &= ~BIT(1);
+ oct_csr_write(data, BGX_SMU_TX_CTL(priv->node, priv->bgx, priv->index));
+
+ clock_mhz = octeon_get_io_clock_rate() / 1000000;
+ data = oct_csr_read(BGX_SPU_DBG_CONTROL(priv->node, priv->bgx));
+ data &= ~GENMASK_ULL(43, 32);
+ data |= (clock_mhz - 1) << 32;
+ oct_csr_write(data, BGX_SPU_DBG_CONTROL(priv->node, priv->bgx));
+
+ /* Fifo in 16-byte words */
+ tx_fifo_size = bgx_get_tx_fifo_size(priv);
+ tx_fifo_size >>= 4;
+ oct_csr_write(tx_fifo_size - 10, BGX_SMU_TX_THRESH(priv->node, priv->bgx, priv->index));
+
+ if (priv->mode == PORT_MODE_RXAUI && priv->phy_np) {
+ data = oct_csr_read(BGX_SPU_MISC_CONTROL(priv->node, priv->bgx, priv->index));
+ data |= BIT(10);
+ oct_csr_write(data, BGX_SPU_MISC_CONTROL(priv->node, priv->bgx, priv->index));
+ }
+
+ /* Some PHYs take up to 250ms to stabilize */
+ if (!octeon_is_simulation())
+ usleep_range(250000, 300000);
+
+ return 0;
+}
+
+/* Configure/initialize a bgx port. */
+static int bgx_port_init(struct bgx_port_priv *priv)
+{
+ int rc = 0;
+ u64 data;
+
+ /* GSER-20956 */
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) &&
+ (priv->mode == PORT_MODE_10G_KR ||
+ priv->mode == PORT_MODE_XFI ||
+ priv->mode == PORT_MODE_40G_KR4 ||
+ priv->mode == PORT_MODE_XLAUI)) {
+ /* Disable link training */
+ data = oct_csr_read(BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+ data &= ~(1 << 1);
+ oct_csr_write(data, BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+ }
+
+ bgx_common_init_pknd(priv);
+
+ if (priv->mode == PORT_MODE_SGMII ||
+ priv->mode == PORT_MODE_RGMII)
+ rc = bgx_xgmii_hardware_init(priv);
+ else
+ rc = bgx_xaui_hardware_init(priv);
+
+ return rc;
+}
+
+static int bgx_port_get_qlm_speed(struct bgx_port_priv *priv, int qlm)
+{
+ enum lane_mode lmode;
+ u64 data;
+
+ data = oct_csr_read(GSER_LANE_MODE(priv->node, qlm));
+ lmode = data & 0xf;
+
+ switch (lmode) {
+ case R_25G_REFCLK100:
+ return 2500;
+ case R_5G_REFCLK100:
+ return 5000;
+ case R_8G_REFCLK100:
+ return 8000;
+ case R_125G_REFCLK15625_KX:
+ return 1250;
+ case R_3125G_REFCLK15625_XAUI:
+ return 3125;
+ case R_103125G_REFCLK15625_KR:
+ return 10312;
+ case R_125G_REFCLK15625_SGMII:
+ return 1250;
+ case R_5G_REFCLK15625_QSGMII:
+ return 5000;
+ case R_625G_REFCLK15625_RXAUI:
+ return 6250;
+ case R_25G_REFCLK125:
+ return 2500;
+ case R_5G_REFCLK125:
+ return 5000;
+ case R_8G_REFCLK125:
+ return 8000;
+ default:
+ return 0;
+ }
+}
+
+static struct port_status bgx_port_get_sgmii_link(struct bgx_port_priv *priv)
+{
+ struct port_status status;
+ int speed;
+
+ /* The simulator always uses a 1Gbps full duplex port */
+ if (octeon_is_simulation()) {
+ status.link = 1;
+ status.duplex = DUPLEX_FULL;
+ status.speed = 1000;
+ } else {
+ /* Use the qlm speed */
+ speed = bgx_port_get_qlm_speed(priv, priv->qlm);
+ status.link = 1;
+ status.duplex = DUPLEX_FULL;
+ status.speed = speed * 8 / 10;
+ }
+
+ return status;
+}
+
+static int bgx_port_xgmii_set_link_up(struct bgx_port_priv *priv)
+{
+ u64 data;
+ int timeout;
+
+ if (!octeon_is_simulation()) {
+ /* PCS reset sequence */
+ data = oct_csr_read(BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+ data |= BIT(15);
+ oct_csr_write(data, BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+
+ /* Wait for reset to complete */
+ udelay(1);
+ data = oct_csr_read(BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+ if (data & BIT(15)) {
+ netdev_err(priv->netdev,
+ "BGX%d:%d: PCS stuck in reset\n", priv->bgx, priv->node);
+ return -1;
+ }
+ }
+
+ /* Autonegotiation */
+ if (priv->phy_np) {
+ data = oct_csr_read(BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+ data |= BIT(9);
+ if (priv->mode != PORT_MODE_RGMII)
+ data |= BIT(12);
+ else
+ data &= ~BIT(12);
+ data &= ~BIT(11);
+ oct_csr_write(data, BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+ } else {
+ data = oct_csr_read(BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+ data |= BIT(6);
+ data &= ~(BIT(13) | BIT(12) | BIT(11));
+ oct_csr_write(data, BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+ }
+
+ data = oct_csr_read(BGX_GMP_PCS_MISC_CTL(priv->node, priv->bgx, priv->index));
+ data &= ~(BIT(9) | BIT(8));
+ if (priv->mode_1000basex)
+ data |= BIT(8);
+ if (priv->bgx_as_phy)
+ data |= BIT(9);
+ oct_csr_write(data, BGX_GMP_PCS_MISC_CTL(priv->node, priv->bgx, priv->index));
+
+ /* Wait for autonegotiation to complete */
+ if (!octeon_is_simulation() && !priv->bgx_as_phy &&
+ priv->mode != PORT_MODE_RGMII) {
+ timeout = 10000;
+ do {
+ data = oct_csr_read(BGX_GMP_PCS_MR_STATUS(priv->node, priv->bgx, priv->index));
+ if (data & BIT(5))
+ break;
+ timeout--;
+ udelay(1);
+ } while (timeout);
+ if (!timeout) {
+ netdev_err(priv->netdev, "BGX%d:%d: AN timeout\n", priv->bgx, priv->node);
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+static void bgx_port_rgmii_set_link_down(struct bgx_port_priv *priv)
+{
+ int rx_fifo_len;
+ u64 data;
+
+ data = oct_csr_read(XCV_RESET(priv->node));
+ data &= ~BIT(1);
+ oct_csr_write(data, XCV_RESET(priv->node));
+ /* Is this read really needed? TODO */
+ data = oct_csr_read(XCV_RESET(priv->node));
+
+ /* Wait for 2 MTUs */
+ mdelay(10);
+
+ data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+ data &= ~BIT(14);
+ oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+
+ /* Wait for the rx and tx fifos to drain */
+ do {
+ data = oct_csr_read(BGX_CMR_RX_FIFO_LEN(priv->node, priv->bgx, priv->index));
+ rx_fifo_len = data & 0x1fff;
+ data = oct_csr_read(BGX_CMR_TX_FIFO_LEN(priv->node, priv->bgx, priv->index));
+ } while (rx_fifo_len > 0 || !(data & BIT(13)));
+
+ data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+ data &= ~BIT(13);
+ oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+
+ data = oct_csr_read(XCV_RESET(priv->node));
+ data &= ~BIT(3);
+ oct_csr_write(data, XCV_RESET(priv->node));
+
+ data = oct_csr_read(BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+ data |= BIT(11);
+ oct_csr_write(data, BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+}
+
+static void bgx_port_sgmii_set_link_down(struct bgx_port_priv *priv)
+{
+ u64 data;
+
+ data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+ data &= ~(BIT(14) | BIT(13));
+ oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+
+ data = oct_csr_read(BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+ data &= ~BIT(12);
+ oct_csr_write(data, BGX_GMP_PCS_MR_CONTROL(priv->node, priv->bgx, priv->index));
+
+ data = oct_csr_read(BGX_GMP_PCS_MISC_CTL(priv->node, priv->bgx, priv->index));
+ data |= BIT(11);
+ oct_csr_write(data, BGX_GMP_PCS_MISC_CTL(priv->node, priv->bgx, priv->index));
+ data = oct_csr_read(BGX_GMP_PCS_MISC_CTL(priv->node, priv->bgx, priv->index));
+}
+
+static int bgx_port_sgmii_set_link_speed(struct bgx_port_priv *priv,
+ struct port_status status)
+{
+ int timeout;
+ u64 miscx;
+ u64 data;
+ u64 prtx;
+
+ data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+ data &= ~(BIT(14) | BIT(13));
+ oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+
+ timeout = 10000;
+ do {
+ prtx = oct_csr_read(BGX_GMP_GMI_PRT_CFG(priv->node, priv->bgx, priv->index));
+ if (prtx & BIT(13) && prtx & BIT(12))
+ break;
+ timeout--;
+ udelay(1);
+ } while (timeout);
+ if (!timeout) {
+ netdev_err(priv->netdev, "BGX%d:%d: GMP idle timeout\n",
+ priv->bgx, priv->node);
+ return -1;
+ }
+
+ prtx = oct_csr_read(BGX_GMP_GMI_PRT_CFG(priv->node, priv->bgx, priv->index));
+ miscx = oct_csr_read(BGX_GMP_PCS_MISC_CTL(priv->node, priv->bgx, priv->index));
+ if (status.link) {
+ miscx &= ~BIT(11);
+ if (status.duplex == DUPLEX_FULL)
+ prtx |= BIT(2);
+ else
+ prtx &= ~BIT(2);
+ } else {
+ miscx |= BIT(11);
+ }
+
+ switch (status.speed) {
+ case 10:
+ prtx &= ~(BIT(3) | BIT(1));
+ prtx |= BIT(8);
+ miscx &= ~GENMASK_ULL(6, 0);
+ miscx |= 25;
+ oct_csr_write(64, BGX_GMP_GMI_TX_SLOT(priv->node, priv->bgx, priv->index));
+ oct_csr_write(0, BGX_GMP_GMI_TX_BURST(priv->node, priv->bgx, priv->index));
+ break;
+ case 100:
+ prtx &= ~(BIT(8) | BIT(3) | BIT(1));
+ miscx &= ~GENMASK_ULL(6, 0);
+ miscx |= 5;
+ oct_csr_write(64, BGX_GMP_GMI_TX_SLOT(priv->node, priv->bgx, priv->index));
+ oct_csr_write(0, BGX_GMP_GMI_TX_BURST(priv->node, priv->bgx, priv->index));
+ break;
+ case 1000:
+ prtx |= (BIT(3) | BIT(1));
+ prtx &= ~BIT(8);
+ miscx &= ~GENMASK_ULL(6, 0);
+ miscx |= 1;
+ oct_csr_write(512, BGX_GMP_GMI_TX_SLOT(priv->node, priv->bgx, priv->index));
+ if (status.duplex == DUPLEX_FULL)
+ oct_csr_write(0, BGX_GMP_GMI_TX_BURST(priv->node, priv->bgx, priv->index));
+ else
+ oct_csr_write(8192, BGX_GMP_GMI_TX_BURST(priv->node, priv->bgx, priv->index));
+ break;
+ default:
+ break;
+ }
+
+ oct_csr_write(miscx, BGX_GMP_PCS_MISC_CTL(priv->node, priv->bgx, priv->index));
+ oct_csr_write(prtx, BGX_GMP_GMI_PRT_CFG(priv->node, priv->bgx, priv->index));
+ /* This read verifies the write completed */
+ prtx = oct_csr_read(BGX_GMP_GMI_PRT_CFG(priv->node, priv->bgx, priv->index));
+
+ data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+ data |= (BIT(14) | BIT(13));
+ oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+
+ return 0;
+}
+
+static int bgx_port_rgmii_set_link_speed(struct bgx_port_priv *priv,
+ struct port_status status)
+{
+ bool speed_changed = false;
+ bool int_lpbk = false;
+ bool do_credits;
+ int speed;
+ u64 data;
+
+ switch (status.speed) {
+ case 10:
+ speed = 0;
+ break;
+ case 100:
+ speed = 1;
+ break;
+ case 1000:
+ default:
+ speed = 2;
+ break;
+ }
+
+ /* Do credits if link came up */
+ data = oct_csr_read(XCV_RESET(priv->node));
+ do_credits = status.link && !(data & BIT(63));
+
+ /* Was there a speed change */
+ data = oct_csr_read(XCV_CTL(priv->node));
+ if ((data & GENMASK_ULL(1, 0)) != speed)
+ speed_changed = true;
+
+ /* Clear clkrst when in internal loopback */
+ if (data & BIT(2)) {
+ int_lpbk = true;
+ data = oct_csr_read(XCV_RESET(priv->node));
+ data &= ~BIT(15);
+ oct_csr_write(data, XCV_RESET(priv->node));
+ }
+
+ /* Link came up or there was a speed change */
+ data = oct_csr_read(XCV_RESET(priv->node));
+ if (status.link && (!(data & BIT(63)) || speed_changed)) {
+ data |= BIT(63);
+ oct_csr_write(data, XCV_RESET(priv->node));
+
+ data = oct_csr_read(XCV_CTL(priv->node));
+ data &= ~GENMASK_ULL(1, 0);
+ data |= speed;
+ oct_csr_write(data, XCV_CTL(priv->node));
+
+ data = oct_csr_read(XCV_DLL_CTL(priv->node));
+ data |= BIT(23);
+ data &= ~GENMASK_ULL(22, 16);
+ data &= ~BIT(15);
+ oct_csr_write(data, XCV_DLL_CTL(priv->node));
+
+ data = oct_csr_read(XCV_DLL_CTL(priv->node));
+ data &= ~GENMASK_ULL(1, 0);
+ oct_csr_write(data, XCV_DLL_CTL(priv->node));
+
+ data = oct_csr_read(XCV_RESET(priv->node));
+ data &= ~BIT(11);
+ oct_csr_write(data, XCV_RESET(priv->node));
+
+ usleep_range(10, 100);
+
+ data = oct_csr_read(XCV_COMP_CTL(priv->node));
+ data &= ~BIT(63);
+ oct_csr_write(data, XCV_COMP_CTL(priv->node));
+
+ data = oct_csr_read(XCV_RESET(priv->node));
+ data |= BIT(7);
+ oct_csr_write(data, XCV_RESET(priv->node));
+
+ data = oct_csr_read(XCV_RESET(priv->node));
+ if (int_lpbk)
+ data &= ~BIT(15);
+ else
+ data |= BIT(15);
+ oct_csr_write(data, XCV_RESET(priv->node));
+
+ data = oct_csr_read(XCV_RESET(priv->node));
+ data |= BIT(2) | BIT(0);
+ oct_csr_write(data, XCV_RESET(priv->node));
+ }
+
+ data = oct_csr_read(XCV_RESET(priv->node));
+ if (status.link)
+ data |= BIT(3) | BIT(1);
+ else
+ data &= ~(BIT(3) | BIT(1));
+ oct_csr_write(data, XCV_RESET(priv->node));
+
+ if (!status.link) {
+ mdelay(10);
+ oct_csr_write(0, XCV_RESET(priv->node));
+ }
+
+ /* Grant pko tx credits */
+ if (do_credits) {
+ data = oct_csr_read(XCV_BATCH_CRD_RET(priv->node));
+ data |= BIT(0);
+ oct_csr_write(data, XCV_BATCH_CRD_RET(priv->node));
+ }
+
+ return 0;
+}
+
+static int bgx_port_set_xgmii_link(struct bgx_port_priv *priv,
+ struct port_status status)
+{
+ int rc = 0;
+ u64 data;
+
+ if (status.link) {
+ /* Link up */
+ data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+ data |= BIT(15);
+ oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+
+ /* BGX-22429 */
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) && priv->index) {
+ data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, 0));
+ data |= BIT(15);
+ oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, 0));
+ }
+
+ rc = bgx_port_xgmii_set_link_up(priv);
+ if (rc)
+ return rc;
+ rc = bgx_port_sgmii_set_link_speed(priv, status);
+ if (rc)
+ return rc;
+ if (priv->mode == PORT_MODE_RGMII)
+ rc = bgx_port_rgmii_set_link_speed(priv, status);
+ } else {
+ /* Link down */
+ if (priv->mode == PORT_MODE_RGMII) {
+ bgx_port_rgmii_set_link_down(priv);
+ rc = bgx_port_sgmii_set_link_speed(priv, status);
+ if (rc)
+ return rc;
+ rc = bgx_port_rgmii_set_link_speed(priv, status);
+ } else {
+ bgx_port_sgmii_set_link_down(priv);
+ }
+ }
+
+ return rc;
+}
+
+static struct port_status bgx_port_get_xaui_link(struct bgx_port_priv *priv)
+{
+ struct port_status status;
+ int lanes;
+ int speed;
+ u64 data;
+
+ status.link = 0;
+ status.duplex = DUPLEX_HALF;
+ status.speed = 0;
+
+ /* Get the link state */
+ data = oct_csr_read(BGX_SMU_TX_CTL(priv->node, priv->bgx, priv->index));
+ data &= GENMASK_ULL(5, 4);
+ if (!data) {
+ data = oct_csr_read(BGX_SMU_RX_CTL(priv->node, priv->bgx, priv->index));
+ data &= GENMASK_ULL(1, 0);
+ if (!data) {
+ data = oct_csr_read(BGX_SPU_STATUS1(priv->node, priv->bgx, priv->index));
+ if (data & BIT(2))
+ status.link = 1;
+ }
+ }
+
+ if (status.link) {
+ /* Always full duplex */
+ status.duplex = DUPLEX_FULL;
+
+ /* Speed */
+ speed = bgx_port_get_qlm_speed(priv, priv->qlm);
+ data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+ switch ((data >> 8) & 7) {
+ default:
+ case 1:
+ speed = (speed * 8 + 5) / 10;
+ lanes = 4;
+ break;
+ case 2:
+ speed = (speed * 8 + 5) / 10;
+ lanes = 2;
+ break;
+ case 3:
+ speed = (speed * 64 + 33) / 66;
+ lanes = 1;
+ break;
+ case 4:
+ if (speed == 6250)
+ speed = 6445;
+ speed = (speed * 64 + 33) / 66;
+ lanes = 4;
+ break;
+ }
+
+ speed *= lanes;
+ status.speed = speed;
+ }
+
+ return status;
+}
+
+static int bgx_port_init_xaui_an(struct bgx_port_priv *priv)
+{
+ u64 data;
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+ data = oct_csr_read(BGX_SPU_INT(priv->node, priv->bgx, priv->index));
+ /* If autonegotiation is no good */
+ if (!(data & BIT(11))) {
+ data = BIT(12) | BIT(11) | BIT(10);
+ oct_csr_write(data, BGX_SPU_INT(priv->node, priv->bgx, priv->index));
+
+ data = oct_csr_read(BGX_SPU_AN_CONTROL(priv->node, priv->bgx, priv->index));
+ data |= BIT(9);
+ oct_csr_write(data, BGX_SPU_AN_CONTROL(priv->node, priv->bgx, priv->index));
+ return -1;
+ }
+ } else {
+ data = oct_csr_read(BGX_SPU_AN_STATUS(priv->node, priv->bgx, priv->index));
+ /* If autonegotiation hasn't completed */
+ if (!(data & BIT(5))) {
+ data = oct_csr_read(BGX_SPU_AN_CONTROL(priv->node, priv->bgx, priv->index));
+ data |= BIT(9);
+ oct_csr_write(data, BGX_SPU_AN_CONTROL(priv->node, priv->bgx, priv->index));
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+static void bgx_port_xaui_start_training(struct bgx_port_priv *priv)
+{
+ u64 data;
+
+ data = BIT(14) | BIT(13);
+ oct_csr_write(data, BGX_SPU_INT(priv->node, priv->bgx, priv->index));
+
+ /* BGX-20968 */
+ oct_csr_write(0, BGX_SPU_BR_PMD_LP_CUP(priv->node, priv->bgx, priv->index));
+ oct_csr_write(0, BGX_SPU_BR_PMD_LD_CUP(priv->node, priv->bgx, priv->index));
+ oct_csr_write(0, BGX_SPU_BR_PMD_LD_REP(priv->node, priv->bgx, priv->index));
+ data = oct_csr_read(BGX_SPU_AN_CONTROL(priv->node, priv->bgx, priv->index));
+ data &= ~BIT(12);
+ oct_csr_write(data, BGX_SPU_AN_CONTROL(priv->node, priv->bgx, priv->index));
+ udelay(1);
+
+ data = oct_csr_read(BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+ data |= BIT(1);
+ oct_csr_write(data, BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+ udelay(1);
+
+ data = oct_csr_read(BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+ data |= BIT(0);
+ oct_csr_write(data, BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+}
+
+static int bgx_port_gser_27882(struct bgx_port_priv *priv)
+{
+ int timeout;
+ u64 addr;
+ u64 data;
+
+ timeout = 200;
+ do {
+ data = oct_csr_read(GSER_RX_EIE_DETSTS(priv->node, priv->qlm));
+ if (data & (1 << (priv->index + 8)))
+ break;
+ timeout--;
+ udelay(1);
+ } while (timeout);
+ if (!timeout)
+ return -1;
+
+ addr = GSER_LANE_PCS_CTLIFC_0(priv->node, priv->qlm, priv->index);
+ data = oct_csr_read(addr);
+ data |= BIT(12);
+ oct_csr_write(data, addr);
+
+ addr = GSER_LANE_PCS_CTLIFC_2(priv->node, priv->qlm, priv->index);
+ data = oct_csr_read(addr);
+ data |= BIT(7);
+ oct_csr_write(data, addr);
+
+ data = oct_csr_read(addr);
+ data |= BIT(15);
+ oct_csr_write(data, addr);
+
+ data = oct_csr_read(addr);
+ data &= ~BIT(7);
+ oct_csr_write(data, addr);
+
+ data = oct_csr_read(addr);
+ data |= BIT(15);
+ oct_csr_write(data, addr);
+
+ return 0;
+}
+
+static void bgx_port_xaui_restart_training(struct bgx_port_priv *priv)
+{
+ u64 data;
+
+ data = BIT(14) | BIT(13);
+ oct_csr_write(data, BGX_SPU_INT(priv->node, priv->bgx, priv->index));
+ usleep_range(1700, 2000);
+
+ /* BGX-20968 */
+ oct_csr_write(0, BGX_SPU_BR_PMD_LP_CUP(priv->node, priv->bgx, priv->index));
+ oct_csr_write(0, BGX_SPU_BR_PMD_LD_CUP(priv->node, priv->bgx, priv->index));
+ oct_csr_write(0, BGX_SPU_BR_PMD_LD_REP(priv->node, priv->bgx, priv->index));
+
+ /* Restart training */
+ data = oct_csr_read(BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+ data |= BIT(0);
+ oct_csr_write(data, BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+}
+
+static int bgx_port_get_max_qlm_lanes(int qlm)
+{
+ if (OCTEON_IS_MODEL(OCTEON_CN73XX))
+ return (qlm < 4) ? 4 : 2;
+ else if (OCTEON_IS_MODEL(OCTEON_CNF75XX))
+ return 2;
+ return 4;
+}
+
+static int bgx_port_qlm_rx_equalization(struct bgx_port_priv *priv,
+ int qlm, int lane)
+{
+ int max_lanes = bgx_port_get_max_qlm_lanes(qlm);
+ int lane_mask;
+ int timeout;
+ int rc = 0;
+ u64 lmode;
+ u64 addr;
+ u64 data;
+ int i;
+
+ lane_mask = lane == -1 ? ((1 << max_lanes) - 1) : (1 << lane);
+
+ /* Nothing to do for qlms in reset */
+ data = oct_csr_read(GSER_PHY_CTL(priv->node, qlm));
+ if (data & (BIT(0) | BIT(1)))
+ return -1;
+
+ for (i = 0; i < max_lanes; i++) {
+ if (!(i & lane_mask))
+ continue;
+
+ addr = GSER_LANE_LBERT_CFG(priv->node, qlm, i);
+ data = oct_csr_read(addr);
+ /* Rx equalization can't be completed while pattern matcher is
+ * enabled because it causes errors.
+ */
+ if (data & BIT(6))
+ return -1;
+ }
+
+ lmode = oct_csr_read(GSER_LANE_MODE(priv->node, qlm));
+ lmode &= 0xf;
+ addr = GSER_LANE_P_MODE_1(priv->node, qlm, lmode);
+ data = oct_csr_read(addr);
+ /* Don't complete rx equalization if in VMA manual mode */
+ if (data & BIT(14))
+ return 0;
+
+ /* Apply rx equalization for speed > 6250 */
+ if (bgx_port_get_qlm_speed(priv, qlm) < 6250)
+ return 0;
+
+ /* Wait until rx data is valid (CDRLOCK) */
+ timeout = 500;
+ addr = GSER_RX_EIE_DETSTS(priv->node, qlm);
+ do {
+ data = oct_csr_read(addr);
+ data >>= 8;
+ data &= lane_mask;
+ if (data == lane_mask)
+ break;
+ timeout--;
+ udelay(1);
+ } while (timeout);
+ if (!timeout) {
+ pr_debug("QLM%d:%d: CDRLOCK timeout\n", qlm, priv->node);
+ return -1;
+ }
+
+ bgx_port_gser_20075(priv, qlm, lane);
+
+ for (i = 0; i < max_lanes; i++) {
+ if (!(i & lane_mask))
+ continue;
+ /* Skip lane 3 on 78p1.x due to gser-20075. Handled above */
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) && i == 3)
+ continue;
+
+ /* Enable software control */
+ addr = GSER_BR_RX_CTL(priv->node, qlm, i);
+ data = oct_csr_read(addr);
+ data |= BIT(2);
+ oct_csr_write(data, addr);
+
+ /* Clear the completion flag */
+ addr = GSER_BR_RX_EER(priv->node, qlm, i);
+ data = oct_csr_read(addr);
+ data &= ~BIT(14);
+ data |= BIT(15);
+ oct_csr_write(data, addr);
+ }
+
+ /* Wait for rx equalization to complete */
+ for (i = 0; i < max_lanes; i++) {
+ if (!(i & lane_mask))
+ continue;
+
+ timeout = 250000;
+ addr = GSER_BR_RX_EER(priv->node, qlm, i);
+ do {
+ data = oct_csr_read(addr);
+ if (data & BIT(14))
+ break;
+ timeout--;
+ udelay(1);
+ } while (timeout);
+ if (!timeout) {
+ pr_debug("QLM%d:%d: RXT_ESV timeout\n",
+ qlm, priv->node);
+ rc = -1;
+ }
+
+ /* Switch back to hardware control */
+ addr = GSER_BR_RX_CTL(priv->node, qlm, i);
+ data = oct_csr_read(addr);
+ data &= ~BIT(2);
+ oct_csr_write(data, addr);
+ }
+
+ return rc;
+}
+
+static int bgx_port_xaui_equalization(struct bgx_port_priv *priv)
+{
+ u64 data;
+ int lane;
+
+ /* Nothing to do for loopback mode */
+ data = oct_csr_read(BGX_SPU_CONTROL1(priv->node, priv->bgx,
+ priv->index));
+ if (data & BIT(14))
+ return 0;
+
+ if (priv->mode == PORT_MODE_XAUI || priv->mode == PORT_MODE_XLAUI) {
+ if (bgx_port_qlm_rx_equalization(priv, priv->qlm, -1))
+ return -1;
+
+ /* BGX2 of 73xx uses 2 dlms */
+ if (OCTEON_IS_MODEL(OCTEON_CN73XX) && priv->bgx == 2) {
+ if (bgx_port_qlm_rx_equalization(priv, priv->qlm + 1, -1))
+ return -1;
+ }
+ } else if (priv->mode == PORT_MODE_RXAUI) {
+ /* Rxaui always uses 2 lanes */
+ if (bgx_port_qlm_rx_equalization(priv, priv->qlm, -1))
+ return -1;
+ } else if (priv->mode == PORT_MODE_XFI) {
+ lane = priv->index;
+ if ((OCTEON_IS_MODEL(OCTEON_CN73XX) && priv->qlm == 6) ||
+ (OCTEON_IS_MODEL(OCTEON_CNF75XX) && priv->qlm == 5))
+ lane -= 2;
+
+ if (bgx_port_qlm_rx_equalization(priv, priv->qlm, lane))
+ return -1;
+ }
+
+ return 0;
+}
+
+static int bgx_port_init_xaui_link(struct bgx_port_priv *priv)
+{
+ int use_training = 0;
+ int use_ber = 0;
+ int timeout;
+ int rc = 0;
+ u64 data;
+
+ if (priv->mode == PORT_MODE_10G_KR || priv->mode == PORT_MODE_40G_KR4)
+ use_training = 1;
+
+ if (!octeon_is_simulation() &&
+ (priv->mode == PORT_MODE_XFI || priv->mode == PORT_MODE_XLAUI ||
+ priv->mode == PORT_MODE_10G_KR || priv->mode == PORT_MODE_40G_KR4))
+ use_ber = 1;
+
+ data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+ data &= ~(BIT(14) | BIT(13));
+ oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+
+ data = oct_csr_read(BGX_SPU_MISC_CONTROL(priv->node, priv->bgx, priv->index));
+ data |= BIT(12);
+ oct_csr_write(data, BGX_SPU_MISC_CONTROL(priv->node, priv->bgx, priv->index));
+
+ if (!octeon_is_simulation()) {
+ data = oct_csr_read(BGX_SPU_AN_CONTROL(priv->node, priv->bgx, priv->index));
+ /* Restart autonegotiation */
+ if (data & BIT(12)) {
+ rc = bgx_port_init_xaui_an(priv);
+ if (rc)
+ return rc;
+ }
+
+ if (use_training) {
+ data = oct_csr_read(BGX_SPU_BR_PMD_CONTROL(priv->node, priv->bgx, priv->index));
+ /* Check if training is enabled */
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) &&
+ !(data & BIT(1))) {
+ bgx_port_xaui_start_training(priv);
+ return -1;
+ }
+
+ if (OCTEON_IS_MODEL(OCTEON_CN73XX) ||
+ OCTEON_IS_MODEL(OCTEON_CNF75XX) ||
+ OCTEON_IS_MODEL(OCTEON_CN78XX))
+ bgx_port_gser_27882(priv);
+
+ data = oct_csr_read(BGX_SPU_INT(priv->node, priv->bgx, priv->index));
+
+ /* Restart training if it failed */
+ if ((data & BIT(14)) &&
+ !OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+ bgx_port_xaui_restart_training(priv);
+ return -1;
+ }
+
+ if (!(data & BIT(13))) {
+ pr_debug("Waiting for link training\n");
+ return -1;
+ }
+ } else {
+ bgx_port_xaui_equalization(priv);
+ }
+
+ /* Wait until the reset is complete */
+ timeout = 10000;
+ do {
+ data = oct_csr_read(BGX_SPU_CONTROL1(priv->node, priv->bgx, priv->index));
+ if (!(data & BIT(15)))
+ break;
+ timeout--;
+ udelay(1);
+ } while (timeout);
+ if (!timeout) {
+ pr_debug("BGX%d:%d:%d: Reset timeout\n", priv->bgx,
+ priv->index, priv->node);
+ return -1;
+ }
+
+ if (use_ber) {
+ timeout = 10000;
+ do {
+ data =
+ oct_csr_read(BGX_SPU_BR_STATUS1(priv->node, priv->bgx, priv->index));
+ if (data & BIT(0))
+ break;
+ timeout--;
+ udelay(1);
+ } while (timeout);
+ if (!timeout) {
+ pr_debug("BGX%d:%d:%d: BLK_LOCK timeout\n",
+ priv->bgx, priv->index, priv->node);
+ return -1;
+ }
+ } else {
+ timeout = 10000;
+ do {
+ data =
+ oct_csr_read(BGX_SPU_BX_STATUS(priv->node, priv->bgx, priv->index));
+ if (data & BIT(12))
+ break;
+ timeout--;
+ udelay(1);
+ } while (timeout);
+ if (!timeout) {
+ pr_debug("BGX%d:%d:%d: Lanes align timeout\n",
+ priv->bgx, priv->index, priv->node);
+ return -1;
+ }
+ }
+
+ if (use_ber) {
+ data = oct_csr_read(BGX_SPU_BR_STATUS2(priv->node, priv->bgx, priv->index));
+ data |= BIT(15);
+ oct_csr_write(data, BGX_SPU_BR_STATUS2(priv->node, priv->bgx, priv->index));
+ }
+
+ data = oct_csr_read(BGX_SPU_STATUS2(priv->node, priv->bgx, priv->index));
+ data |= BIT(10);
+ oct_csr_write(data, BGX_SPU_STATUS2(priv->node, priv->bgx, priv->index));
+
+ data = oct_csr_read(BGX_SPU_STATUS2(priv->node, priv->bgx, priv->index));
+ if (data & BIT(10)) {
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) &&
+ use_training)
+ bgx_port_xaui_restart_training(priv);
+ return -1;
+ }
+
+ /* Wait for mac rx to be ready */
+ timeout = 10000;
+ do {
+ data = oct_csr_read(BGX_SMU_RX_CTL(priv->node, priv->bgx, priv->index));
+ data &= GENMASK_ULL(1, 0);
+ if (!data)
+ break;
+ timeout--;
+ udelay(1);
+ } while (timeout);
+ if (!timeout) {
+ pr_debug("BGX%d:%d:%d: mac ready timeout\n",
+ priv->bgx, priv->index, priv->node);
+ return -1;
+ }
+
+ /* Wait for bgx rx to be idle */
+ timeout = 10000;
+ do {
+ data = oct_csr_read(BGX_SMU_CTRL(priv->node, priv->bgx, priv->index));
+ if (data & BIT(0))
+ break;
+ timeout--;
+ udelay(1);
+ } while (timeout);
+ if (!timeout) {
+ pr_debug("BGX%d:%d:%d: rx idle timeout\n",
+ priv->bgx, priv->index, priv->node);
+ return -1;
+ }
+
+ /* Wait for gmx tx to be idle */
+ timeout = 10000;
+ do {
+ data = oct_csr_read(BGX_SMU_CTRL(priv->node, priv->bgx, priv->index));
+ if (data & BIT(1))
+ break;
+ timeout--;
+ udelay(1);
+ } while (timeout);
+ if (!timeout) {
+ pr_debug("BGX%d:%d:%d: tx idle timeout\n",
+ priv->bgx, priv->index, priv->node);
+ return -1;
+ }
+
+ /* Check rcvflt is still be 0 */
+ data = oct_csr_read(BGX_SPU_STATUS2(priv->node, priv->bgx, priv->index));
+ if (data & BIT(10)) {
+ pr_debug("BGX%d:%d:%d: receive fault\n",
+ priv->bgx, priv->index, priv->node);
+ return -1;
+ }
+
+ /* Receive link is latching low. Force it high and verify it */
+ data = oct_csr_read(BGX_SPU_STATUS1(priv->node, priv->bgx, priv->index));
+ data |= BIT(2);
+ oct_csr_write(data, BGX_SPU_STATUS1(priv->node, priv->bgx, priv->index));
+ timeout = 10000;
+ do {
+ data = oct_csr_read(BGX_SPU_STATUS1(priv->node, priv->bgx, priv->index));
+ if (data & BIT(2))
+ break;
+ timeout--;
+ udelay(1);
+ } while (timeout);
+ if (!timeout) {
+ pr_debug("BGX%d:%d:%d: rx link down\n",
+ priv->bgx, priv->index, priv->node);
+ return -1;
+ }
+ }
+
+ if (use_ber) {
+ /* Read error counters to clear */
+ data = oct_csr_read(BGX_SPU_BR_BIP_ERR_CNT(priv->node, priv->bgx, priv->index));
+ data = oct_csr_read(BGX_SPU_BR_STATUS2(priv->node, priv->bgx, priv->index));
+
+ /* Verify latch lock is set */
+ if (!(data & BIT(15))) {
+ pr_debug("BGX%d:%d:%d: latch lock lost\n",
+ priv->bgx, priv->index, priv->node);
+ return -1;
+ }
+
+ /* LATCHED_BER is cleared by writing 1 to it */
+ if (data & BIT(14))
+ oct_csr_write(data, BGX_SPU_BR_STATUS2(priv->node, priv->bgx, priv->index));
+
+ usleep_range(1500, 2000);
+ data = oct_csr_read(BGX_SPU_BR_STATUS2(priv->node, priv->bgx, priv->index));
+ if (data & BIT(14)) {
+ pr_debug("BGX%d:%d:%d: BER test failed\n",
+ priv->bgx, priv->index, priv->node);
+ return -1;
+ }
+ }
+
+ /* Enable packet transmit and receive */
+ data = oct_csr_read(BGX_SPU_MISC_CONTROL(priv->node, priv->bgx, priv->index));
+ data &= ~BIT(12);
+ oct_csr_write(data, BGX_SPU_MISC_CONTROL(priv->node, priv->bgx, priv->index));
+ data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+ data |= BIT(14) | BIT(13);
+ oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+
+ return 0;
+}
+
+static int bgx_port_set_xaui_link(struct bgx_port_priv *priv,
+ struct port_status status)
+{
+ bool spu_link_ok = false;
+ bool smu_rx_ok = false;
+ bool smu_tx_ok = false;
+ int rc = 0;
+ u64 data;
+
+ /* Initialize hardware if link is up but hardware is not happy */
+ if (status.link) {
+ data = oct_csr_read(BGX_SMU_TX_CTL(priv->node, priv->bgx, priv->index));
+ data &= GENMASK_ULL(5, 4);
+ smu_tx_ok = data == 0;
+
+ data = oct_csr_read(BGX_SMU_RX_CTL(priv->node, priv->bgx, priv->index));
+ data &= GENMASK_ULL(1, 0);
+ smu_rx_ok = data == 0;
+
+ data = oct_csr_read(BGX_SPU_STATUS1(priv->node, priv->bgx, priv->index));
+ data &= BIT(2);
+ spu_link_ok = data == BIT(2);
+
+ if (!smu_tx_ok || !smu_rx_ok || !spu_link_ok)
+ rc = bgx_port_init_xaui_link(priv);
+ }
+
+ return rc;
+}
+
+static struct bgx_port_priv *bgx_port_netdev2priv(struct net_device *netdev)
+{
+ struct bgx_port_netdev_priv *nd_priv = netdev_priv(netdev);
+
+ return nd_priv->bgx_priv;
+}
+
+void bgx_port_set_netdev(struct device *dev, struct net_device *netdev)
+{
+ struct bgx_port_priv *priv = dev_get_drvdata(dev);
+
+ if (netdev) {
+ struct bgx_port_netdev_priv *nd_priv = netdev_priv(netdev);
+
+ nd_priv->bgx_priv = priv;
+ }
+
+ priv->netdev = netdev;
+}
+EXPORT_SYMBOL(bgx_port_set_netdev);
+
+int bgx_port_ethtool_get_link_ksettings(struct net_device *netdev,
+ struct ethtool_link_ksettings *cmd)
+{
+ struct bgx_port_priv *priv = bgx_port_netdev2priv(netdev);
+
+ if (priv->phydev) {
+ phy_ethtool_ksettings_get(priv->phydev, cmd);
+ return 0;
+ }
+ return -EINVAL;
+}
+EXPORT_SYMBOL(bgx_port_ethtool_get_link_ksettings);
+
+int bgx_port_ethtool_set_settings(struct net_device *netdev,
+ struct ethtool_cmd *cmd)
+{
+ struct bgx_port_priv *p = bgx_port_netdev2priv(netdev);
+
+ if (p->phydev)
+ return phy_ethtool_sset(p->phydev, cmd);
+
+ return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL(bgx_port_ethtool_set_settings);
+
+int bgx_port_ethtool_nway_reset(struct net_device *netdev)
+{
+ struct bgx_port_priv *p = bgx_port_netdev2priv(netdev);
+
+ if (p->phydev)
+ return phy_start_aneg(p->phydev);
+
+ return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL(bgx_port_ethtool_nway_reset);
+
+const u8 *bgx_port_get_mac(struct net_device *netdev)
+{
+ struct bgx_port_priv *priv = bgx_port_netdev2priv(netdev);
+
+ return priv->mac_addr;
+}
+EXPORT_SYMBOL(bgx_port_get_mac);
+
+int bgx_port_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ struct bgx_port_priv *p = bgx_port_netdev2priv(netdev);
+
+ if (p->phydev)
+ return phy_mii_ioctl(p->phydev, ifr, cmd);
+ return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL(bgx_port_do_ioctl);
+
+static void bgx_port_write_cam(struct bgx_port_priv *priv, int cam,
+ const u8 *mac)
+{
+ u64 m = 0;
+ int i;
+
+ if (mac) {
+ for (i = 0; i < 6; i++)
+ m |= (((u64)mac[i]) << ((5 - i) * 8));
+ m |= BIT(48);
+ }
+
+ m |= (u64)priv->index << 52;
+ oct_csr_write(m, BGX_CMR_RX_ADRX_CAM(priv->node, priv->bgx, priv->index * 8 + cam));
+}
+
+/* Set MAC address for the net_device that is attached. */
+void bgx_port_set_rx_filtering(struct net_device *netdev)
+{
+ struct bgx_port_priv *priv = bgx_port_netdev2priv(netdev);
+ struct netdev_hw_addr *ha;
+ int available_cam_entries;
+ int current_cam_entry;
+ u64 data;
+
+ available_cam_entries = 8;
+ data = 0;
+ data |= BIT(0); /* Accept all Broadcast*/
+
+ if ((netdev->flags & IFF_PROMISC) || netdev->uc.count > 7) {
+ data &= ~BIT(3); /* Reject CAM match */
+ available_cam_entries = 0;
+ } else {
+ /* One CAM entry for the primary address, leaves seven
+ * for the secondary addresses.
+ */
+ data |= BIT(3); /* Accept CAM match */
+ available_cam_entries = 7 - netdev->uc.count;
+ }
+
+ if (netdev->flags & IFF_PROMISC) {
+ data |= 1 << 1; /* Accept all Multicast */
+ } else {
+ if (netdev->flags & IFF_MULTICAST) {
+ if ((netdev->flags & IFF_ALLMULTI) ||
+ netdev_mc_count(netdev) > available_cam_entries)
+ data |= 1 << 1; /* Accept all Multicast */
+ else
+ data |= 2 << 1; /* Accept all Mcast via CAM */
+ }
+ }
+ current_cam_entry = 0;
+ if (data & BIT(3)) {
+ bgx_port_write_cam(priv, current_cam_entry, netdev->dev_addr);
+ current_cam_entry++;
+ netdev_for_each_uc_addr(ha, netdev) {
+ bgx_port_write_cam(priv, current_cam_entry, ha->addr);
+ current_cam_entry++;
+ }
+ }
+ if (((data & GENMASK_ULL(2, 1)) >> 1) == 2) {
+ /* Accept all Multicast via CAM */
+ netdev_for_each_mc_addr(ha, netdev) {
+ bgx_port_write_cam(priv, current_cam_entry, ha->addr);
+ current_cam_entry++;
+ }
+ }
+ while (current_cam_entry < 8) {
+ bgx_port_write_cam(priv, current_cam_entry, NULL);
+ current_cam_entry++;
+ }
+ oct_csr_write(data, BGX_CMR_RX_ADR_CTL(priv->node, priv->bgx,
+ priv->index));
+}
+EXPORT_SYMBOL(bgx_port_set_rx_filtering);
+
+static void bgx_port_adjust_link(struct net_device *netdev)
+{
+ struct bgx_port_priv *priv = bgx_port_netdev2priv(netdev);
+ bool link_changed = false;
+ unsigned int duplex;
+ unsigned int speed;
+ unsigned int link;
+
+ mutex_lock(&priv->lock);
+
+ if (!priv->phydev->link && priv->last_status.link)
+ link_changed = true;
+
+ if (priv->phydev->link &&
+ (priv->last_status.link != priv->phydev->link ||
+ priv->last_status.duplex != priv->phydev->duplex ||
+ priv->last_status.speed != priv->phydev->speed))
+ link_changed = true;
+
+ link = priv->phydev->link;
+ priv->last_status.link = priv->phydev->link;
+
+ speed = priv->phydev->speed;
+ priv->last_status.speed = priv->phydev->speed;
+
+ duplex = priv->phydev->duplex;
+ priv->last_status.duplex = priv->phydev->duplex;
+
+ mutex_unlock(&priv->lock);
+
+ if (link_changed) {
+ struct port_status status;
+
+ phy_print_status(priv->phydev);
+
+ status.link = link ? 1 : 0;
+ status.duplex = duplex;
+ status.speed = speed;
+ if (!link)
+ /* Let TX drain. FIXME check that it is drained. */
+ mdelay(50);
+ priv->set_link(priv, status);
+ }
+}
+
+static void bgx_port_check_state(struct work_struct *work)
+{
+ struct bgx_port_priv *priv;
+ struct port_status status;
+
+ priv = container_of(work, struct bgx_port_priv, dwork.work);
+
+ status = priv->get_link(priv);
+
+ if (!status.link &&
+ priv->mode != PORT_MODE_SGMII && priv->mode != PORT_MODE_RGMII)
+ bgx_port_init_xaui_link(priv);
+
+ /* Only used when there is no phy device, so we cannot use
+ * phy_print_status() here.
+ */
+ if (priv->last_status.link != status.link) {
+ priv->last_status.link = status.link;
+ if (status.link)
+ netdev_info(priv->netdev, "Link is up - %d/%s\n",
+ status.speed,
+ status.duplex == DUPLEX_FULL ? "Full" : "Half");
+ else
+ netdev_info(priv->netdev, "Link is down\n");
+ }
+
+ mutex_lock(&priv->lock);
+ if (priv->work_queued)
+ queue_delayed_work(check_state_wq, &priv->dwork, HZ);
+ mutex_unlock(&priv->lock);
+}
+
+int bgx_port_enable(struct net_device *netdev)
+{
+ struct bgx_port_priv *priv = bgx_port_netdev2priv(netdev);
+ struct port_status status;
+ bool dont_use_phy;
+ u64 data;
+
+ if (priv->mode == PORT_MODE_SGMII || priv->mode == PORT_MODE_RGMII) {
+ /* 1G */
+ data = oct_csr_read(BGX_GMP_GMI_TX_APPEND(priv->node, priv->bgx, priv->index));
+ data |= BIT(2) | BIT(1);
+ oct_csr_write(data, BGX_GMP_GMI_TX_APPEND(priv->node, priv->bgx, priv->index));
+
+ /* Packets are padded (without FCS) to MIN_SIZE + 1 in SGMII */
+ data = 60 - 1;
+ oct_csr_write(data, BGX_GMP_GMI_TX_MIN_PKT(priv->node, priv->bgx, priv->index));
+ } else {
+ /* 10G or higher */
+ data = oct_csr_read(BGX_SMU_TX_APPEND(priv->node, priv->bgx, priv->index));
+ data |= BIT(2) | BIT(1);
+ oct_csr_write(data, BGX_SMU_TX_APPEND(priv->node, priv->bgx, priv->index));
+
+ /* Packets are padded(with FCS) to MIN_SIZE in non-SGMII */
+ data = 60 + 4;
+ oct_csr_write(data, BGX_SMU_TX_MIN_PKT(priv->node, priv->bgx, priv->index));
+ }
+
+ switch (priv->mode) {
+ case PORT_MODE_XLAUI:
+ case PORT_MODE_XFI:
+ case PORT_MODE_10G_KR:
+ case PORT_MODE_40G_KR4:
+ dont_use_phy = true;
+ break;
+ default:
+ dont_use_phy = false;
+ break;
+ }
+
+ if (!priv->phy_np || dont_use_phy) {
+ status = priv->get_link(priv);
+ priv->set_link(priv, status);
+ netif_carrier_on(netdev);
+
+ mutex_lock(&check_state_wq_mutex);
+ if (!check_state_wq) {
+ check_state_wq =
+ alloc_workqueue("check_state_wq", WQ_UNBOUND | WQ_MEM_RECLAIM, 1);
+ }
+ mutex_unlock(&check_state_wq_mutex);
+ if (!check_state_wq)
+ return -ENOMEM;
+
+ mutex_lock(&priv->lock);
+ INIT_DELAYED_WORK(&priv->dwork, bgx_port_check_state);
+ queue_delayed_work(check_state_wq, &priv->dwork, 0);
+ priv->work_queued = true;
+ mutex_unlock(&priv->lock);
+
+ netdev_info(priv->netdev, "Link is not ready\n");
+
+ } else {
+ priv->phydev = of_phy_connect(netdev, priv->phy_np,
+ bgx_port_adjust_link, 0, priv->phy_mode);
+ if (!priv->phydev)
+ return -ENODEV;
+
+ netif_carrier_off(netdev);
+ phy_start_aneg(priv->phydev);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(bgx_port_enable);
+
+int bgx_port_disable(struct net_device *netdev)
+{
+ struct bgx_port_priv *priv = bgx_port_netdev2priv(netdev);
+ struct port_status status;
+
+ if (priv->phydev) {
+ phy_stop(priv->phydev);
+ phy_disconnect(priv->phydev);
+ }
+ priv->phydev = NULL;
+
+ netif_carrier_off(netdev);
+ memset(&status, 0, sizeof(status));
+ priv->last_status.link = 0;
+ priv->set_link(priv, status);
+
+ mutex_lock(&priv->lock);
+ if (priv->work_queued) {
+ cancel_delayed_work_sync(&priv->dwork);
+ priv->work_queued = false;
+ }
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(bgx_port_disable);
+
+int bgx_port_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct bgx_port_priv *priv = bgx_port_netdev2priv(netdev);
+ int max_frame;
+
+ netdev->mtu = new_mtu;
+
+ max_frame = round_up(new_mtu + ETH_HLEN + ETH_FCS_LEN, 8);
+
+ if (priv->mode == PORT_MODE_SGMII || priv->mode == PORT_MODE_RGMII) {
+ /* 1G */
+ oct_csr_write(max_frame, BGX_GMP_GMI_RX_JABBER(priv->node, priv->bgx, priv->index));
+ } else {
+ /* 10G or higher */
+ oct_csr_write(max_frame, BGX_SMU_RX_JABBER(priv->node, priv->bgx, priv->index));
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(bgx_port_change_mtu);
+
+void bgx_port_mix_assert_reset(struct net_device *netdev, int mix, bool v)
+{
+ struct bgx_port_priv *priv = bgx_port_netdev2priv(netdev);
+ u64 mask = 1ull << (3 + (mix & 1));
+ u64 data;
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) && v) {
+ /* Need to disable the mix before resetting the bgx-mix
+ * interface as not doing so confuses the other already up
+ * lmacs.
+ */
+ data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+ data &= ~BIT(11);
+ oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+ }
+
+ data = oct_csr_read(BGX_CMR_GLOBAL_CONFIG(priv->node, priv->bgx));
+ if (v)
+ data |= mask;
+ else
+ data &= ~mask;
+ oct_csr_write(data, BGX_CMR_GLOBAL_CONFIG(priv->node, priv->bgx));
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) && !v) {
+ data = oct_csr_read(BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+ data |= BIT(11);
+ oct_csr_write(data, BGX_CMR_CONFIG(priv->node, priv->bgx, priv->index));
+ }
+}
+EXPORT_SYMBOL(bgx_port_mix_assert_reset);
+
+static int bgx_port_probe(struct platform_device *pdev)
+{
+ struct bgx_port_priv *priv;
+ const __be32 *reg;
+ const u8 *mac;
+ int numa_node;
+ u32 index;
+ u64 addr;
+ int rc;
+
+ reg = of_get_property(pdev->dev.parent->of_node, "reg", NULL);
+ addr = of_translate_address(pdev->dev.parent->of_node, reg);
+ mac = of_get_mac_address(pdev->dev.of_node);
+
+ numa_node = bgx_node_to_numa_node(pdev->dev.parent->of_node);
+
+ rc = of_property_read_u32(pdev->dev.of_node, "reg", &index);
+ if (rc)
+ return -ENODEV;
+ priv = kzalloc_node(sizeof(*priv), GFP_KERNEL, numa_node);
+ if (!priv)
+ return -ENOMEM;
+ priv->phy_np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
+ priv->phy_mode = of_get_phy_mode(pdev->dev.of_node);
+ /* If phy-mode absent, default to SGMII. */
+ if (priv->phy_mode < 0)
+ priv->phy_mode = PHY_INTERFACE_MODE_SGMII;
+
+ if (priv->phy_mode == PHY_INTERFACE_MODE_1000BASEX)
+ priv->mode_1000basex = true;
+
+ if (of_phy_is_fixed_link(pdev->dev.of_node))
+ priv->bgx_as_phy = true;
+
+ mutex_init(&priv->lock);
+ priv->node = numa_node;
+ priv->bgx = bgx_addr_to_interface(addr);
+ priv->index = index;
+ if (mac)
+ priv->mac_addr = mac;
+
+ priv->qlm = bgx_port_get_qlm(priv->node, priv->bgx, priv->index);
+ priv->mode = bgx_port_get_mode(priv->node, priv->bgx, priv->index);
+
+ switch (priv->mode) {
+ case PORT_MODE_SGMII:
+ if (priv->phy_np &&
+ priv->phy_mode != PHY_INTERFACE_MODE_SGMII)
+ dev_warn(&pdev->dev, "SGMII phy mode mismatch.\n");
+ goto set_link_functions;
+ case PORT_MODE_RGMII:
+ if (priv->phy_np && phy_interface_mode_is_rgmii(priv->phy_mode))
+ dev_warn(&pdev->dev, "RGMII phy mode mismatch.\n");
+set_link_functions:
+ priv->get_link = bgx_port_get_sgmii_link;
+ priv->set_link = bgx_port_set_xgmii_link;
+ break;
+ case PORT_MODE_XAUI:
+ case PORT_MODE_RXAUI:
+ case PORT_MODE_XLAUI:
+ case PORT_MODE_XFI:
+ case PORT_MODE_10G_KR:
+ case PORT_MODE_40G_KR4:
+ priv->get_link = bgx_port_get_xaui_link;
+ priv->set_link = bgx_port_set_xaui_link;
+ break;
+ default:
+ goto err;
+ }
+
+ dev_set_drvdata(&pdev->dev, priv);
+
+ bgx_port_init(priv);
+
+ dev_info(&pdev->dev, "Probed\n");
+ return 0;
+ err:
+ kfree(priv);
+ return rc;
+}
+
+static int bgx_port_remove(struct platform_device *pdev)
+{
+ struct bgx_port_priv *priv = dev_get_drvdata(&pdev->dev);
+
+ kfree(priv);
+ return 0;
+}
+
+static void bgx_port_shutdown(struct platform_device *pdev)
+{
+}
+
+static const struct of_device_id bgx_port_match[] = {
+ {
+ .compatible = "cavium,octeon-7890-bgx-port",
+ },
+ {
+ .compatible = "cavium,octeon-7360-xcv",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, bgx_port_match);
+
+static struct platform_driver bgx_port_driver = {
+ .probe = bgx_port_probe,
+ .remove = bgx_port_remove,
+ .shutdown = bgx_port_shutdown,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = KBUILD_MODNAME,
+ .of_match_table = bgx_port_match,
+ },
+};
+
+static int __init bgx_port_driver_init(void)
+{
+ int r;
+ int i;
+ int j;
+ int k;
+
+ for (i = 0; i < MAX_NODES; i++) {
+ for (j = 0; j < MAX_BGX_PER_NODE; j++) {
+ for (k = 0; k < MAX_LMAC_PER_BGX; k++)
+ lmac_pknd[i][j][k] = -1;
+ }
+ }
+
+ bgx_nexus_load();
+ r = platform_driver_register(&bgx_port_driver);
+ return r;
+}
+module_init(bgx_port_driver_init);
+
+static void __exit bgx_port_driver_exit(void)
+{
+ platform_driver_unregister(&bgx_port_driver);
+ if (check_state_wq)
+ destroy_workqueue(check_state_wq);
+}
+module_exit(bgx_port_driver_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cavium, Inc. <support@caviumnetworks.com>");
+MODULE_DESCRIPTION("Cavium, Inc. BGX Ethernet MAC driver.");
diff --git a/drivers/net/ethernet/cavium/octeon/octeon3-core.c b/drivers/net/ethernet/cavium/octeon/octeon3-core.c
new file mode 100644
index 000000000000..2d842d589684
--- /dev/null
+++ b/drivers/net/ethernet/cavium/octeon/octeon3-core.c
@@ -0,0 +1,2079 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2017 Cavium, Inc.
+ *
+ * Core packet processing and initialization for the octeon3_ethernet
+ * packet processor. The packets are received, classified and initial
+ * input checks done by the PKI unit. Input queuing is done by the
+ * SSO. All output processing and hardware queuing is done in the
+ * PKO.
+ */
+#include <linux/ptp_clock_kernel.h>
+#include <linux/platform_device.h>
+#include <linux/etherdevice.h>
+#include <linux/timecounter.h>
+#include <linux/net_tstamp.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/if_vlan.h>
+#include <linux/kthread.h>
+#include <linux/rculist.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/atomic.h>
+#include <linux/module.h>
+#include <linux/wait.h>
+#include <linux/ipv6.h>
+#include <linux/ip.h>
+
+#include <asm/octeon/octeon.h>
+
+#include "octeon3.h"
+
+/* First buffer:
+ *
+ * +---SKB---------+
+ * | |
+ * | |
+ * +--+--*data |
+ * | | |
+ * | | |
+ * | +---------------+
+ * | /|\
+ * | |
+ * | |
+ * \|/ |
+ * WQE - 128 -+-----> +-------------+-------+ -+-
+ * | | *skb ----+ | |
+ * | | | |
+ * | | | |
+ * WQE_SKIP = 128 | | |
+ * | | | |
+ * | | | |
+ * | | | |
+ * | | | First Skip
+ * WQE -----+-----> +---------------------+ |
+ * | word 0 | |
+ * | word 1 | |
+ * | word 2 | |
+ * | word 3 | |
+ * | word 4 | |
+ * +---------------------+ -+-
+ * +----+- packet link |
+ * | | packet data |
+ * | | |
+ * | | |
+ * | | . |
+ * | | . |
+ * | | . |
+ * | +---------------------+
+ * |
+ * |
+ * Later buffers:|
+ * |
+ * |
+ * |
+ * |
+ * |
+ * | +---SKB---------+
+ * | | |
+ * | | |
+ * | +--+--*data |
+ * | | | |
+ * | | | |
+ * | | +---------------+
+ * | | /|\
+ * | | |
+ * | | |
+ * | \|/ |
+ * WQE - 128 ----+--> +-------------+-------+ -+-
+ * | | *skb ----+ | |
+ * | | | |
+ * | | | |
+ * | | | |
+ * | | | LATER_SKIP = 128
+ * | | | |
+ * | | | |
+ * | | | |
+ * | +---------------------+ -+-
+ * | | packet link |
+ * +--> | packet data |
+ * | |
+ * | |
+ * | . |
+ * | . |
+ * | . |
+ * +---------------------+
+ */
+
+#define MAX_TX_QUEUE_DEPTH 512
+#define SSO_INTSN_EXE 0x61
+#define MAX_RX_QUEUES 32
+
+#define SKB_PTR_OFFSET 0
+
+#define MAX_CORES 48
+#define FPA3_NUM_AURAS 1024
+
+#define USE_ASYNC_IOBDMA 1
+#define SCR_SCRATCH 0ull
+#define SSO_NO_WAIT 0ull
+#define DID_TAG_SWTAG 0x60ull
+#define IOBDMA_SENDSINGLE 0xffffffffffffa200ull
+
+/* Values for the value of wqe word2 [ERRLEV] */
+#define PKI_ERRLEV_LA 0x01
+
+/* Values for the value of wqe word2 [OPCODE] */
+#define PKI_OPCODE_NONE 0x00
+#define PKI_OPCODE_JABBER 0x02
+#define PKI_OPCODE_FCS 0x07
+
+/* Values for the layer type in the wqe */
+#define PKI_LTYPE_IP4 0x08
+#define PKI_LTYPE_IP6 0x0a
+#define PKI_LTYPE_TCP 0x10
+#define PKI_LTYPE_UDP 0x11
+#define PKI_LTYPE_SCTP 0x12
+
+/* Registers are accessed via xkphys */
+#define SSO_BASE 0x1670000000000ull
+#define SSO_ADDR(node) (SET_XKPHYS + NODE_OFFSET(node) + \
+ SSO_BASE)
+#define GRP_OFFSET(grp) ((grp) << 16)
+#define GRP_ADDR(n, g) (SSO_ADDR(n) + GRP_OFFSET(g))
+#define SSO_GRP_AQ_CNT(n, g) (GRP_ADDR(n, g) + 0x20000700)
+
+#define MIO_PTP_BASE 0x1070000000000ull
+#define MIO_PTP_ADDR(node) (SET_XKPHYS + NODE_OFFSET(node) + \
+ MIO_PTP_BASE)
+#define MIO_PTP_CLOCK_CFG(node) (MIO_PTP_ADDR(node) + 0xf00)
+#define MIO_PTP_CLOCK_HI(node) (MIO_PTP_ADDR(node) + 0xf10)
+#define MIO_PTP_CLOCK_COMP(node) (MIO_PTP_ADDR(node) + 0xf18)
+
+struct octeon3_ethernet;
+
+struct octeon3_rx {
+ struct napi_struct napi;
+ struct octeon3_ethernet *parent;
+ int rx_grp;
+ int rx_irq;
+ cpumask_t rx_affinity_hint;
+} ____cacheline_aligned_in_smp;
+
+struct octeon3_ethernet {
+ struct bgx_port_netdev_priv bgx_priv; /* Must be first element. */
+ struct list_head list;
+ struct net_device *netdev;
+ enum octeon3_mac_type mac_type;
+ struct octeon3_rx rx_cxt[MAX_RX_QUEUES];
+ struct ptp_clock_info ptp_info;
+ struct ptp_clock *ptp_clock;
+ struct cyclecounter cc;
+ struct timecounter tc;
+ spinlock_t ptp_lock; /* Serialize ptp clock adjustments */
+ int num_rx_cxt;
+ int pki_aura;
+ int pknd;
+ int pko_queue;
+ int node;
+ int interface;
+ int index;
+ int rx_buf_count;
+ int tx_complete_grp;
+ unsigned int rx_timestamp_hw:1;
+ unsigned int tx_timestamp_hw:1;
+ struct delayed_work stat_work;
+ spinlock_t stat_lock; /* Protects stats counters */
+ u64 last_packets;
+ u64 last_octets;
+ u64 last_dropped;
+ atomic64_t rx_packets;
+ atomic64_t rx_octets;
+ atomic64_t rx_dropped;
+ atomic64_t rx_errors;
+ atomic64_t rx_length_errors;
+ atomic64_t rx_crc_errors;
+ atomic64_t tx_packets;
+ atomic64_t tx_octets;
+ atomic64_t tx_dropped;
+ /* The following two fields need to be on a different cache line as
+ * they are updated by pko which invalidates the cache every time it
+ * updates them. The idea is to prevent other fields from being
+ * invalidated unnecessarily.
+ */
+ char cacheline_pad1[CVMX_CACHE_LINE_SIZE];
+ atomic64_t buffers_needed;
+ atomic64_t tx_backlog;
+ char cacheline_pad2[CVMX_CACHE_LINE_SIZE];
+};
+
+static DEFINE_MUTEX(octeon3_eth_init_mutex);
+
+struct octeon3_ethernet_node;
+
+struct octeon3_ethernet_worker {
+ wait_queue_head_t queue;
+ struct task_struct *task;
+ struct octeon3_ethernet_node *oen;
+ atomic_t kick;
+ int order;
+};
+
+struct octeon3_ethernet_node {
+ bool init_done;
+ int next_cpu_irq_affinity;
+ int node;
+ int pki_packet_pool;
+ int sso_pool;
+ int pko_pool;
+ void *sso_pool_stack;
+ void *pko_pool_stack;
+ void *pki_packet_pool_stack;
+ int sso_aura;
+ int pko_aura;
+ int tx_complete_grp;
+ int tx_irq;
+ cpumask_t tx_affinity_hint;
+ struct octeon3_ethernet_worker workers[8];
+ struct mutex device_list_lock; /* Protects the device list */
+ struct list_head device_list;
+ spinlock_t napi_alloc_lock; /* Protects napi allocations */
+};
+
+static int num_packet_buffers = 768;
+
+int ilk0_lanes = 1;
+int ilk1_lanes = 1;
+
+static int rx_queues = 1;
+static int packet_buffer_size = 2048;
+
+static struct octeon3_ethernet_node octeon3_eth_node[MAX_NODES];
+static struct kmem_cache *octeon3_eth_sso_pko_cache;
+
+/**
+ * scratch_read64() - Read a 64 bit value from the processor local
+ * scratchpad memory.
+ *
+ * @offset: Byte offset into scratch pad to read.
+ *
+ * Return: The value read.
+ */
+static inline u64 scratch_read64(u64 offset)
+{
+ /* Barriers never needed for this CPU-local memory. */
+ return *(u64 *)((long)SCRATCH_BASE + offset);
+}
+
+/**
+ * scratch_write64() - Write a 64 bit value to the processor local
+ * scratchpad memory.
+ *
+ * @offset: Byte offset into scratch pad to write
+ * @value: Value to write
+ */
+static inline void scratch_write64(u64 offset, u64 value)
+{
+ /* Barriers never needed for this CPU-local memory. */
+ *(u64 *)((long)SCRATCH_BASE + offset) = value;
+}
+
+static int get_pki_chan(int node, int interface, int index)
+{
+ int pki_chan;
+
+ pki_chan = node << 12;
+
+ if (OCTEON_IS_MODEL(OCTEON_CNF75XX) &&
+ (interface == 1 || interface == 2)) {
+ /* SRIO */
+ pki_chan |= 0x240 + (2 * (interface - 1)) + index;
+ } else {
+ /* BGX */
+ pki_chan |= 0x800 + (0x100 * interface) + (0x10 * index);
+ }
+
+ return pki_chan;
+}
+
+static int octeon3_eth_lgrp_to_ggrp(int node, int grp)
+{
+ return (node << 8) | grp;
+}
+
+static void octeon3_eth_gen_affinity(int node, cpumask_t *mask)
+{
+ int cpu;
+
+ do {
+ cpu = cpumask_next(octeon3_eth_node[node].next_cpu_irq_affinity, cpu_online_mask);
+ octeon3_eth_node[node].next_cpu_irq_affinity++;
+ if (cpu >= nr_cpu_ids) {
+ octeon3_eth_node[node].next_cpu_irq_affinity = -1;
+ continue;
+ }
+ } while (false);
+ cpumask_clear(mask);
+ cpumask_set_cpu(cpu, mask);
+}
+
+struct wr_ret {
+ void *work;
+ u16 grp;
+};
+
+static inline struct wr_ret octeon3_core_get_work_sync(int grp)
+{
+ u64 node = cvmx_get_node_num();
+ struct wr_ret r;
+ u64 response;
+ u64 addr;
+
+ /* See SSO_GET_WORK_LD_S for the address to read */
+ addr = 1ull << 63;
+ addr |= BIT(48);
+ addr |= DID_TAG_SWTAG << 40;
+ addr |= node << 36;
+ addr |= BIT(30);
+ addr |= BIT(29);
+ addr |= octeon3_eth_lgrp_to_ggrp(node, grp) << 4;
+ addr |= SSO_NO_WAIT << 3;
+ response = __raw_readq((void __iomem *)addr);
+
+ /* See SSO_GET_WORK_RTN_S for the format of the response */
+ r.grp = (response & GENMASK_ULL(57, 48)) >> 48;
+ if (response & BIT(63))
+ r.work = NULL;
+ else
+ r.work = phys_to_virt(response & GENMASK_ULL(41, 0));
+
+ return r;
+}
+
+/**
+ * octeon3_core_get_work_async() - Request work via a iobdma command.
+ * Doesn't wait for the response.
+ *
+ * @grp: Group to request work for.
+ */
+static inline void octeon3_core_get_work_async(unsigned int grp)
+{
+ u64 node = cvmx_get_node_num();
+ u64 data;
+
+ /* See SSO_GET_WORK_DMA_S for the command structure */
+ data = SCR_SCRATCH << 56;
+ data |= 1ull << 48;
+ data |= DID_TAG_SWTAG << 40;
+ data |= node << 36;
+ data |= 1ull << 30;
+ data |= 1ull << 29;
+ data |= octeon3_eth_lgrp_to_ggrp(node, grp) << 4;
+ data |= SSO_NO_WAIT << 3;
+
+ __raw_writeq(data, (void __iomem *)IOBDMA_SENDSINGLE);
+}
+
+/**
+ * octeon3_core_get_response_async() - Read the request work response. Must be
+ * called after calling
+ * octeon3_core_get_work_async().
+ *
+ * Return: Work queue entry.
+ */
+static inline struct wr_ret octeon3_core_get_response_async(void)
+{
+ struct wr_ret r;
+ u64 response;
+
+ CVMX_SYNCIOBDMA;
+ response = scratch_read64(SCR_SCRATCH);
+
+ /* See SSO_GET_WORK_RTN_S for the format of the response */
+ r.grp = (response & GENMASK_ULL(57, 48)) >> 48;
+ if (response & BIT(63))
+ r.work = NULL;
+ else
+ r.work = phys_to_virt(response & GENMASK_ULL(41, 0));
+
+ return r;
+}
+
+static void octeon3_eth_replenish_rx(struct octeon3_ethernet *priv, int count)
+{
+ struct sk_buff *skb;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ void **buf;
+
+ skb = __alloc_skb(packet_buffer_size, GFP_ATOMIC, 0, priv->node);
+ if (!skb)
+ break;
+ buf = (void **)PTR_ALIGN(skb->head, 128);
+ buf[SKB_PTR_OFFSET] = skb;
+ octeon_fpa3_free(priv->node, priv->pki_aura, buf);
+ }
+}
+
+static bool octeon3_eth_tx_complete_runnable(struct octeon3_ethernet_worker *worker)
+{
+ return atomic_read(&worker->kick) != 0 || kthread_should_stop();
+}
+
+static int octeon3_eth_replenish_all(struct octeon3_ethernet_node *oen)
+{
+ struct octeon3_ethernet *priv;
+ int batch_size = 32;
+ int pending = 0;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(priv, &oen->device_list, list) {
+ int amount = atomic64_sub_if_positive(batch_size, &priv->buffers_needed);
+
+ if (amount >= 0) {
+ octeon3_eth_replenish_rx(priv, batch_size);
+ pending += amount;
+ }
+ }
+ rcu_read_unlock();
+ return pending;
+}
+
+static int octeon3_eth_tx_complete_hwtstamp(struct octeon3_ethernet *priv,
+ struct sk_buff *skb)
+{
+ struct skb_shared_hwtstamps shts;
+ u64 hwts;
+ u64 ns;
+
+ hwts = *((u64 *)(skb->cb) + 1);
+ ns = timecounter_cyc2time(&priv->tc, hwts);
+ memset(&shts, 0, sizeof(shts));
+ shts.hwtstamp = ns_to_ktime(ns);
+ skb_tstamp_tx(skb, &shts);
+
+ return 0;
+}
+
+static int octeon3_eth_tx_complete_worker(void *data)
+{
+ struct octeon3_ethernet_worker *worker = data;
+ struct octeon3_ethernet_node *oen;
+ int tx_complete_stop_thresh;
+ int backlog_stop_thresh;
+ int backlog;
+ u64 aq_cnt;
+ int order;
+ int i;
+
+ oen = worker->oen;
+ order = worker->order;
+ tx_complete_stop_thresh = order * 100;
+ backlog_stop_thresh = order == 0 ? 31 : order * 80;
+
+ while (!kthread_should_stop()) {
+ wait_event_interruptible(worker->queue, octeon3_eth_tx_complete_runnable(worker));
+ atomic_dec_if_positive(&worker->kick); /* clear the flag */
+
+ do {
+ backlog = octeon3_eth_replenish_all(oen);
+ for (i = 0; i < 100; i++) {
+ struct octeon3_ethernet *tx_priv;
+ struct net_device *tx_netdev;
+ struct sk_buff *skb;
+ struct wr_ret r;
+ void **work;
+
+ r = octeon3_core_get_work_sync(oen->tx_complete_grp);
+ work = r.work;
+ if (!work)
+ break;
+ tx_netdev = work[0];
+ tx_priv = netdev_priv(tx_netdev);
+ if (unlikely(netif_queue_stopped(tx_netdev)) &&
+ atomic64_read(&tx_priv->tx_backlog) < MAX_TX_QUEUE_DEPTH)
+ netif_wake_queue(tx_netdev);
+ skb = container_of((void *)work, struct sk_buff, cb);
+ if (unlikely(tx_priv->tx_timestamp_hw) &&
+ unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS))
+ octeon3_eth_tx_complete_hwtstamp(tx_priv, skb);
+ consume_skb(skb);
+ }
+
+ aq_cnt = oct_csr_read(SSO_GRP_AQ_CNT(oen->node, oen->tx_complete_grp));
+ aq_cnt &= GENMASK_ULL(32, 0);
+ if ((backlog > backlog_stop_thresh || aq_cnt > tx_complete_stop_thresh) &&
+ order < ARRAY_SIZE(oen->workers) - 1) {
+ atomic_set(&oen->workers[order + 1].kick, 1);
+ wake_up(&oen->workers[order + 1].queue);
+ }
+ } while (!need_resched() && (backlog > backlog_stop_thresh ||
+ aq_cnt > tx_complete_stop_thresh));
+
+ cond_resched();
+
+ if (!octeon3_eth_tx_complete_runnable(worker))
+ octeon3_sso_irq_set(oen->node, oen->tx_complete_grp, true);
+ }
+
+ return 0;
+}
+
+static irqreturn_t octeon3_eth_tx_handler(int irq, void *info)
+{
+ struct octeon3_ethernet_node *oen = info;
+ /* Disarm the irq. */
+ octeon3_sso_irq_set(oen->node, oen->tx_complete_grp, false);
+ atomic_set(&oen->workers[0].kick, 1);
+ wake_up(&oen->workers[0].queue);
+ return IRQ_HANDLED;
+}
+
+static int octeon3_eth_global_init(unsigned int node,
+ struct platform_device *pdev)
+{
+ struct octeon3_ethernet_node *oen;
+ unsigned int sso_intsn;
+ int rv = 0;
+ int i;
+
+ mutex_lock(&octeon3_eth_init_mutex);
+
+ oen = octeon3_eth_node + node;
+
+ if (oen->init_done)
+ goto done;
+
+ /* CN78XX-P1.0 cannot un-initialize PKO, so get a module
+ * reference to prevent it from being unloaded.
+ */
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_0))
+ if (!try_module_get(THIS_MODULE))
+ dev_err(&pdev->dev,
+ "ERROR: Could not obtain module reference for CN78XX-P1.0\n");
+
+ INIT_LIST_HEAD(&oen->device_list);
+ mutex_init(&oen->device_list_lock);
+ spin_lock_init(&oen->napi_alloc_lock);
+
+ oen->node = node;
+
+ octeon_fpa3_init(node);
+ rv = octeon_fpa3_pool_init(node, -1, &oen->sso_pool,
+ &oen->sso_pool_stack, 40960);
+ if (rv)
+ goto done;
+
+ rv = octeon_fpa3_pool_init(node, -1, &oen->pko_pool,
+ &oen->pko_pool_stack, 40960);
+ if (rv)
+ goto done;
+
+ rv = octeon_fpa3_pool_init(node, -1, &oen->pki_packet_pool,
+ &oen->pki_packet_pool_stack, 64 * num_packet_buffers);
+ if (rv)
+ goto done;
+
+ rv = octeon_fpa3_aura_init(node, oen->sso_pool, -1,
+ &oen->sso_aura, num_packet_buffers, 20480);
+ if (rv)
+ goto done;
+
+ rv = octeon_fpa3_aura_init(node, oen->pko_pool, -1,
+ &oen->pko_aura, num_packet_buffers, 20480);
+ if (rv)
+ goto done;
+
+ dev_info(&pdev->dev, "SSO:%d:%d, PKO:%d:%d\n", oen->sso_pool,
+ oen->sso_aura, oen->pko_pool, oen->pko_aura);
+
+ if (!octeon3_eth_sso_pko_cache) {
+ octeon3_eth_sso_pko_cache = kmem_cache_create("sso_pko", 4096, 128, 0, NULL);
+ if (!octeon3_eth_sso_pko_cache) {
+ rv = -ENOMEM;
+ goto done;
+ }
+ }
+
+ rv = octeon_fpa3_mem_fill(node, octeon3_eth_sso_pko_cache,
+ oen->sso_aura, 1024);
+ if (rv)
+ goto done;
+
+ rv = octeon_fpa3_mem_fill(node, octeon3_eth_sso_pko_cache,
+ oen->pko_aura, 1024);
+ if (rv)
+ goto done;
+
+ rv = octeon3_sso_init(node, oen->sso_aura);
+ if (rv)
+ goto done;
+
+ oen->tx_complete_grp = octeon3_sso_alloc_grp(node, -1);
+ if (oen->tx_complete_grp < 0)
+ goto done;
+
+ sso_intsn = SSO_INTSN_EXE << 12 | oen->tx_complete_grp;
+ oen->tx_irq = irq_create_mapping(NULL, sso_intsn);
+ if (!oen->tx_irq) {
+ rv = -ENODEV;
+ goto done;
+ }
+
+ rv = octeon3_pko_init_global(node, oen->pko_aura);
+ if (rv) {
+ rv = -ENODEV;
+ goto done;
+ }
+
+ octeon3_pki_vlan_init(node);
+ octeon3_pki_cluster_init(node, pdev);
+ octeon3_pki_ltype_init(node);
+ octeon3_pki_enable(node);
+
+ for (i = 0; i < ARRAY_SIZE(oen->workers); i++) {
+ oen->workers[i].oen = oen;
+ init_waitqueue_head(&oen->workers[i].queue);
+ oen->workers[i].order = i;
+ }
+ for (i = 0; i < ARRAY_SIZE(oen->workers); i++) {
+ oen->workers[i].task = kthread_create_on_node(octeon3_eth_tx_complete_worker,
+ oen->workers + i, node,
+ "oct3_eth/%d:%d", node, i);
+ if (IS_ERR(oen->workers[i].task)) {
+ rv = PTR_ERR(oen->workers[i].task);
+ goto done;
+ } else {
+#ifdef CONFIG_NUMA
+ set_cpus_allowed_ptr(oen->workers[i].task, cpumask_of_node(node));
+#endif
+ wake_up_process(oen->workers[i].task);
+ }
+ }
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X))
+ octeon3_sso_pass1_limit(node, oen->tx_complete_grp);
+
+ rv = request_irq(oen->tx_irq, octeon3_eth_tx_handler,
+ IRQ_TYPE_EDGE_RISING, "oct3_eth_tx_done", oen);
+ if (rv)
+ goto done;
+ octeon3_eth_gen_affinity(node, &oen->tx_affinity_hint);
+ irq_set_affinity_hint(oen->tx_irq, &oen->tx_affinity_hint);
+
+ octeon3_sso_irq_set(node, oen->tx_complete_grp, true);
+
+ oen->init_done = true;
+done:
+ mutex_unlock(&octeon3_eth_init_mutex);
+ return rv;
+}
+
+static struct sk_buff *octeon3_eth_work_to_skb(void *w)
+{
+ struct sk_buff *skb;
+ void **f = w;
+
+ skb = f[-16];
+ return skb;
+}
+
+/* Receive one packet.
+ * returns the number of RX buffers consumed.
+ */
+static int octeon3_eth_rx_one(struct octeon3_rx *rx,
+ bool is_async, bool req_next)
+{
+ struct octeon3_ethernet *priv = rx->parent;
+ union buf_ptr packet_ptr;
+ unsigned int packet_len;
+ struct sk_buff *skb;
+ int len_remaining;
+ struct wqe *work;
+ struct wr_ret r;
+ int segments;
+ u8 *data;
+ int ret;
+
+ if (is_async)
+ r = octeon3_core_get_response_async();
+ else
+ r = octeon3_core_get_work_sync(rx->rx_grp);
+ work = r.work;
+ if (!work)
+ return 0;
+
+ /* Request the next work so it'll be ready when we need it */
+ if (is_async && req_next)
+ octeon3_core_get_work_async(rx->rx_grp);
+
+ skb = octeon3_eth_work_to_skb(work);
+
+ segments = work->word0.bufs;
+ ret = segments;
+ packet_ptr = work->packet_ptr;
+ if (unlikely(work->word2.err_level <= PKI_ERRLEV_LA &&
+ work->word2.err_code != PKI_OPCODE_NONE)) {
+ atomic64_inc(&priv->rx_errors);
+ switch (work->word2.err_code) {
+ case PKI_OPCODE_JABBER:
+ atomic64_inc(&priv->rx_length_errors);
+ break;
+ case PKI_OPCODE_FCS:
+ atomic64_inc(&priv->rx_crc_errors);
+ break;
+ }
+ data = phys_to_virt(packet_ptr.addr);
+ for (;;) {
+ dev_kfree_skb_any(skb);
+ segments--;
+ if (segments <= 0)
+ break;
+ packet_ptr.u64 = *(u64 *)(data - 8);
+#ifndef __LITTLE_ENDIAN
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+ /* PKI_BUFLINK_S's are endian-swapped */
+ packet_ptr.u64 = swab64(packet_ptr.u64);
+ }
+#endif
+ data = phys_to_virt(packet_ptr.addr);
+ skb = octeon3_eth_work_to_skb((void *)round_down((unsigned long)data, 128ull));
+ }
+ goto out;
+ }
+
+ packet_len = work->word1.len;
+ data = phys_to_virt(packet_ptr.addr);
+ skb->data = data;
+ skb->len = packet_len;
+ len_remaining = packet_len;
+ if (segments == 1) {
+ /* Strip the ethernet fcs */
+ skb->len -= 4;
+ skb_set_tail_pointer(skb, skb->len);
+ } else {
+ struct sk_buff *current_skb = skb;
+ struct sk_buff *next_skb = NULL;
+ unsigned int segment_size;
+ bool first_frag = true;
+
+ skb_frag_list_init(skb);
+ for (;;) {
+ segment_size = (segments == 1) ? len_remaining : packet_ptr.size;
+ len_remaining -= segment_size;
+ if (!first_frag) {
+ current_skb->len = segment_size;
+ skb->data_len += segment_size;
+ skb->truesize += current_skb->truesize;
+ }
+ skb_set_tail_pointer(current_skb, segment_size);
+ segments--;
+ if (segments == 0)
+ break;
+ packet_ptr.u64 = *(u64 *)(data - 8);
+#ifndef __LITTLE_ENDIAN
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+ /* PKI_BUFLINK_S's are endian-swapped */
+ packet_ptr.u64 = swab64(packet_ptr.u64);
+ }
+#endif
+ data = phys_to_virt(packet_ptr.addr);
+ next_skb = octeon3_eth_work_to_skb((void *)round_down((unsigned long)data, 128ull));
+ if (first_frag) {
+ next_skb->next = skb_shinfo(current_skb)->frag_list;
+ skb_shinfo(current_skb)->frag_list = next_skb;
+ } else {
+ current_skb->next = next_skb;
+ next_skb->next = NULL;
+ }
+ current_skb = next_skb;
+ first_frag = false;
+ current_skb->data = data;
+ }
+
+ /* Strip the ethernet fcs */
+ pskb_trim(skb, skb->len - 4);
+ }
+
+ skb_checksum_none_assert(skb);
+ if (unlikely(priv->rx_timestamp_hw)) {
+ /* The first 8 bytes are the timestamp */
+ u64 hwts = *(u64 *)skb->data;
+ u64 ns;
+ struct skb_shared_hwtstamps *shts;
+
+ ns = timecounter_cyc2time(&priv->tc, hwts);
+ shts = skb_hwtstamps(skb);
+ memset(shts, 0, sizeof(*shts));
+ shts->hwtstamp = ns_to_ktime(ns);
+ __skb_pull(skb, 8);
+ }
+
+ skb->protocol = eth_type_trans(skb, priv->netdev);
+ skb->dev = priv->netdev;
+ if (priv->netdev->features & NETIF_F_RXCSUM) {
+ if ((work->word2.lc_hdr_type == PKI_LTYPE_IP4 ||
+ work->word2.lc_hdr_type == PKI_LTYPE_IP6) &&
+ (work->word2.lf_hdr_type == PKI_LTYPE_TCP ||
+ work->word2.lf_hdr_type == PKI_LTYPE_UDP ||
+ work->word2.lf_hdr_type == PKI_LTYPE_SCTP))
+ if (work->word2.err_code == 0)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ }
+
+ napi_gro_receive(&rx->napi, skb);
+out:
+ return ret;
+}
+
+static int octeon3_eth_napi(struct napi_struct *napi, int budget)
+{
+ struct octeon3_ethernet *priv;
+ struct octeon3_rx *cxt;
+ int rx_count = 0;
+ u64 old_scratch;
+ int n_bufs = 0;
+ u64 aq_cnt;
+ int n = 0;
+
+ cxt = container_of(napi, struct octeon3_rx, napi);
+ priv = cxt->parent;
+
+ /* Get the amount of work pending */
+ aq_cnt = oct_csr_read(SSO_GRP_AQ_CNT(priv->node, cxt->rx_grp));
+ aq_cnt &= GENMASK_ULL(32, 0);
+
+ if (likely(USE_ASYNC_IOBDMA)) {
+ /* Save scratch in case userspace is using it */
+ CVMX_SYNCIOBDMA;
+ old_scratch = scratch_read64(SCR_SCRATCH);
+
+ octeon3_core_get_work_async(cxt->rx_grp);
+ }
+
+ while (rx_count < budget) {
+ n = 0;
+
+ if (likely(USE_ASYNC_IOBDMA)) {
+ bool req_next = rx_count < (budget - 1) ? true : false;
+
+ n = octeon3_eth_rx_one(cxt, true, req_next);
+ } else {
+ n = octeon3_eth_rx_one(cxt, false, false);
+ }
+
+ if (n == 0)
+ break;
+
+ n_bufs += n;
+ rx_count++;
+ }
+
+ /* Wake up worker threads */
+ n_bufs = atomic64_add_return(n_bufs, &priv->buffers_needed);
+ if (n_bufs >= 32) {
+ struct octeon3_ethernet_node *oen;
+
+ oen = octeon3_eth_node + priv->node;
+ atomic_set(&oen->workers[0].kick, 1);
+ wake_up(&oen->workers[0].queue);
+ }
+
+ /* Stop the thread when no work is pending */
+ if (rx_count < budget) {
+ napi_complete(napi);
+ octeon3_sso_irq_set(cxt->parent->node, cxt->rx_grp, true);
+ }
+
+ if (likely(USE_ASYNC_IOBDMA)) {
+ /* Restore the scratch area */
+ scratch_write64(SCR_SCRATCH, old_scratch);
+ }
+
+ return rx_count;
+}
+
+#undef BROKEN_SIMULATOR_CSUM
+
+static void ethtool_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, "octeon3-ethernet", sizeof(info->driver));
+ strlcpy(info->version, "1.0", sizeof(info->version));
+ strlcpy(info->bus_info,
+ dev_name(netdev->dev.parent), sizeof(info->bus_info));
+}
+
+static int ethtool_get_ts_info(struct net_device *ndev,
+ struct ethtool_ts_info *info)
+{
+ struct octeon3_ethernet *priv = netdev_priv(ndev);
+
+ info->so_timestamping =
+ SOF_TIMESTAMPING_TX_HARDWARE |
+ SOF_TIMESTAMPING_RX_HARDWARE |
+ SOF_TIMESTAMPING_RAW_HARDWARE;
+
+ if (priv->ptp_clock)
+ info->phc_index = ptp_clock_index(priv->ptp_clock);
+ else
+ info->phc_index = -1;
+
+ info->tx_types = (1 << HWTSTAMP_TX_OFF) | (1 << HWTSTAMP_TX_ON);
+
+ info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) | (1 << HWTSTAMP_FILTER_ALL);
+
+ return 0;
+}
+
+static const struct ethtool_ops octeon3_ethtool_ops = {
+ .get_drvinfo = ethtool_get_drvinfo,
+ .get_link_ksettings = bgx_port_ethtool_get_link_ksettings,
+ .set_settings = bgx_port_ethtool_set_settings,
+ .nway_reset = bgx_port_ethtool_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_ts_info = ethtool_get_ts_info,
+};
+
+static int octeon3_eth_common_ndo_init(struct net_device *netdev,
+ int extra_skip)
+{
+ struct octeon3_ethernet_node *oen;
+ int base_rx_grp[MAX_RX_QUEUES];
+ struct octeon3_ethernet *priv;
+ int pki_chan;
+ int aura;
+ int dq;
+ int i;
+ int r;
+
+ priv = netdev_priv(netdev);
+ oen = octeon3_eth_node + priv->node;
+
+ netif_carrier_off(netdev);
+
+ netdev->features |=
+#ifndef BROKEN_SIMULATOR_CSUM
+ NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM |
+#endif
+ NETIF_F_SG |
+ NETIF_F_FRAGLIST |
+ NETIF_F_RXCSUM |
+ NETIF_F_LLTX;
+
+ if (!OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X))
+ netdev->features |= NETIF_F_SCTP_CRC;
+
+ netdev->features |= NETIF_F_TSO | NETIF_F_TSO6;
+
+ /* Set user changeable settings */
+ netdev->hw_features = netdev->features;
+
+ priv->rx_buf_count = num_packet_buffers;
+
+ pki_chan = get_pki_chan(priv->node, priv->interface, priv->index);
+
+ dq = octeon3_pko_interface_init(priv->node, priv->interface,
+ priv->index, priv->mac_type, pki_chan);
+ if (dq < 0) {
+ dev_err(netdev->dev.parent, "Failed to initialize pko\n");
+ return -ENODEV;
+ }
+
+ r = octeon3_pko_activate_dq(priv->node, dq, 1);
+ if (r < 0) {
+ dev_err(netdev->dev.parent, "Failed to activate dq\n");
+ return -ENODEV;
+ }
+
+ priv->pko_queue = dq;
+ octeon_fpa3_aura_init(priv->node, oen->pki_packet_pool, -1, &aura,
+ num_packet_buffers, num_packet_buffers * 2);
+ priv->pki_aura = aura;
+
+ r = octeon3_sso_alloc_grp_range(priv->node,
+ -1, rx_queues, false, base_rx_grp);
+ if (r) {
+ dev_err(netdev->dev.parent, "Failed to allocated SSO group\n");
+ return -ENODEV;
+ }
+ for (i = 0; i < rx_queues; i++) {
+ priv->rx_cxt[i].rx_grp = base_rx_grp[i];
+ priv->rx_cxt[i].parent = priv;
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X))
+ octeon3_sso_pass1_limit(priv->node, priv->rx_cxt[i].rx_grp);
+ }
+ priv->num_rx_cxt = rx_queues;
+
+ priv->tx_complete_grp = oen->tx_complete_grp;
+ dev_info(netdev->dev.parent,
+ "rx sso grp:%d..%d aura:%d pknd:%d pko_queue:%d\n",
+ *base_rx_grp, *(base_rx_grp + priv->num_rx_cxt - 1),
+ priv->pki_aura, priv->pknd, priv->pko_queue);
+
+ octeon3_pki_port_init(priv->node, priv->pki_aura, *base_rx_grp,
+ extra_skip, (packet_buffer_size - 128),
+ priv->pknd, priv->num_rx_cxt);
+
+ priv->last_packets = 0;
+ priv->last_octets = 0;
+ priv->last_dropped = 0;
+
+ /* Register ethtool methods */
+ netdev->ethtool_ops = &octeon3_ethtool_ops;
+
+ return 0;
+}
+
+static int octeon3_eth_bgx_ndo_init(struct net_device *netdev)
+{
+ struct octeon3_ethernet *priv = netdev_priv(netdev);
+ const u8 *mac;
+ int r;
+
+ priv->pknd = bgx_port_get_pknd(priv->node, priv->interface, priv->index);
+ octeon3_eth_common_ndo_init(netdev, 0);
+
+ /* Padding and FCS are done in BGX */
+ r = octeon3_pko_set_mac_options(priv->node, priv->interface, priv->index,
+ priv->mac_type, false, false, 0);
+ if (r)
+ return r;
+
+ mac = bgx_port_get_mac(netdev);
+ if (mac && is_valid_ether_addr(mac)) {
+ memcpy(netdev->dev_addr, mac, ETH_ALEN);
+ netdev->addr_assign_type &= ~NET_ADDR_RANDOM;
+ } else {
+ eth_hw_addr_random(netdev);
+ }
+
+ bgx_port_set_rx_filtering(netdev);
+ bgx_port_change_mtu(netdev, netdev->mtu);
+
+ return 0;
+}
+
+static void octeon3_eth_ndo_uninit(struct net_device *netdev)
+{
+ struct octeon3_ethernet *priv = netdev_priv(netdev);
+ int grp[MAX_RX_QUEUES];
+ int i;
+
+ /* Shutdwon pki for this interface */
+ octeon3_pki_port_shutdown(priv->node, priv->pknd);
+ octeon_fpa3_release_aura(priv->node, priv->pki_aura);
+
+ /* Shutdown pko for this interface */
+ octeon3_pko_interface_uninit(priv->node, &priv->pko_queue, 1);
+
+ /* Free the receive contexts sso groups */
+ for (i = 0; i < rx_queues; i++)
+ grp[i] = priv->rx_cxt[i].rx_grp;
+ octeon3_sso_free_grp_range(priv->node, grp, rx_queues);
+}
+
+static void octeon3_eth_ndo_get_stats64(struct net_device *netdev,
+ struct rtnl_link_stats64 *s)
+{
+ struct octeon3_ethernet *priv = netdev_priv(netdev);
+ u64 delta_packets;
+ u64 delta_dropped;
+ u64 delta_octets;
+ u64 dropped;
+ u64 packets;
+ u64 octets;
+
+ /* The 48 bits counters may wrap around. We need to call this
+ * function periodically, to catch any wrap. Locking is
+ * needed to ensure consistency of the RMW operation on the
+ * last_{packets, octets, dropped} variables if two or more
+ * threads enter here at the same time.
+ */
+ spin_lock(&priv->stat_lock);
+
+ octeon3_pki_get_stats(priv->node, priv->pknd, &packets, &octets, &dropped);
+
+ delta_packets = (packets - priv->last_packets) & ((1ull << 48) - 1);
+ delta_octets = (octets - priv->last_octets) & ((1ull << 48) - 1);
+ delta_dropped = (dropped - priv->last_dropped) & ((1ull << 48) - 1);
+
+ priv->last_packets = packets;
+ priv->last_octets = octets;
+ priv->last_dropped = dropped;
+
+ spin_unlock(&priv->stat_lock);
+
+ s->rx_packets = atomic64_add_return_relaxed(delta_packets, &priv->rx_packets);
+ s->rx_bytes = atomic64_add_return_relaxed(delta_octets, &priv->rx_octets);
+ s->rx_dropped = atomic64_add_return_relaxed(delta_dropped, &priv->rx_dropped);
+
+ s->rx_errors = atomic64_read(&priv->rx_errors);
+ s->rx_length_errors = atomic64_read(&priv->rx_length_errors);
+ s->rx_crc_errors = atomic64_read(&priv->rx_crc_errors);
+
+ s->tx_packets = atomic64_read(&priv->tx_packets);
+ s->tx_bytes = atomic64_read(&priv->tx_octets);
+ s->tx_dropped = atomic64_read(&priv->tx_dropped);
+}
+
+static void octeon3_eth_stat_poll(struct work_struct *work)
+{
+ struct octeon3_ethernet *priv;
+ struct rtnl_link_stats64 s;
+
+ priv = container_of(work, struct octeon3_ethernet, stat_work.work);
+ octeon3_eth_ndo_get_stats64(priv->netdev, &s);
+
+ /* Poll every 60s */
+ mod_delayed_work(system_unbound_wq,
+ &priv->stat_work, msecs_to_jiffies(60000));
+}
+
+static irqreturn_t octeon3_eth_rx_handler(int irq, void *info)
+{
+ struct octeon3_rx *rx = info;
+
+ /* Disarm the irq. */
+ octeon3_sso_irq_set(rx->parent->node, rx->rx_grp, false);
+
+ napi_schedule(&rx->napi);
+ return IRQ_HANDLED;
+}
+
+static int octeon3_eth_common_ndo_open(struct net_device *netdev)
+{
+ struct octeon3_ethernet *priv = netdev_priv(netdev);
+ struct octeon3_rx *rx;
+ int i;
+ int r;
+
+ for (i = 0; i < priv->num_rx_cxt; i++) {
+ unsigned int sso_intsn;
+
+ rx = priv->rx_cxt + i;
+ sso_intsn = SSO_INTSN_EXE << 12 | rx->rx_grp;
+
+ rx->rx_irq = irq_create_mapping(NULL, sso_intsn);
+ if (!rx->rx_irq) {
+ netdev_err(netdev,
+ "ERROR: Couldn't map hwirq: %x\n", sso_intsn);
+ r = -EINVAL;
+ goto err1;
+ }
+ r = request_irq(rx->rx_irq, octeon3_eth_rx_handler,
+ IRQ_TYPE_EDGE_RISING, netdev_name(netdev), rx);
+ if (r) {
+ netdev_err(netdev, "ERROR: Couldn't request irq: %d\n",
+ rx->rx_irq);
+ r = -ENOMEM;
+ goto err2;
+ }
+
+ octeon3_eth_gen_affinity(priv->node, &rx->rx_affinity_hint);
+ irq_set_affinity_hint(rx->rx_irq, &rx->rx_affinity_hint);
+
+ netif_napi_add(priv->netdev, &rx->napi,
+ octeon3_eth_napi, NAPI_POLL_WEIGHT);
+ napi_enable(&rx->napi);
+
+ /* Arm the irq. */
+ octeon3_sso_irq_set(priv->node, rx->rx_grp, true);
+ }
+ octeon3_eth_replenish_rx(priv, priv->rx_buf_count);
+
+ /* Start stat polling */
+ octeon3_eth_stat_poll(&priv->stat_work.work);
+
+ return 0;
+
+err2:
+ irq_dispose_mapping(rx->rx_irq);
+err1:
+ for (i--; i >= 0; i--) {
+ rx = priv->rx_cxt + i;
+ free_irq(rx->rx_irq, rx);
+ irq_dispose_mapping(rx->rx_irq);
+ napi_disable(&rx->napi);
+ netif_napi_del(&rx->napi);
+ }
+
+ return r;
+}
+
+static int octeon3_eth_bgx_ndo_open(struct net_device *netdev)
+{
+ int rc;
+
+ rc = octeon3_eth_common_ndo_open(netdev);
+ if (rc == 0)
+ rc = bgx_port_enable(netdev);
+
+ return rc;
+}
+
+static int octeon3_eth_common_ndo_stop(struct net_device *netdev)
+{
+ struct octeon3_ethernet *priv = netdev_priv(netdev);
+ struct octeon3_rx *rx;
+ struct sk_buff *skb;
+ void **w;
+ int i;
+
+ cancel_delayed_work_sync(&priv->stat_work);
+
+ /* Allow enough time for ingress in transit packets to be drained */
+ msleep(20);
+
+ /* Wait until sso has no more work for this interface */
+ for (i = 0; i < priv->num_rx_cxt; i++) {
+ rx = priv->rx_cxt + i;
+ while (oct_csr_read(SSO_GRP_AQ_CNT(priv->node, rx->rx_grp)))
+ msleep(20);
+ }
+
+ /* Free the irq and napi context for each rx context */
+ for (i = 0; i < priv->num_rx_cxt; i++) {
+ rx = priv->rx_cxt + i;
+ octeon3_sso_irq_set(priv->node, rx->rx_grp, false);
+ irq_set_affinity_hint(rx->rx_irq, NULL);
+ free_irq(rx->rx_irq, rx);
+ irq_dispose_mapping(rx->rx_irq);
+ rx->rx_irq = 0;
+ napi_disable(&rx->napi);
+ netif_napi_del(&rx->napi);
+ }
+
+ /* Free the packet buffers */
+ for (;;) {
+ w = octeon_fpa3_alloc(priv->node, priv->pki_aura);
+ if (!w)
+ break;
+ skb = w[0];
+ dev_kfree_skb(skb);
+ }
+
+ return 0;
+}
+
+static int octeon3_eth_bgx_ndo_stop(struct net_device *netdev)
+{
+ int r;
+
+ r = bgx_port_disable(netdev);
+ if (r)
+ return r;
+
+ return octeon3_eth_common_ndo_stop(netdev);
+}
+
+static inline u64 build_pko_send_hdr_desc(struct sk_buff *skb)
+{
+ u64 checksum_alg;
+ u64 send_hdr = 0;
+ u8 l4_hdr = 0;
+
+ /* See PKO_SEND_HDR_S in the HRM for the send header descriptor
+ * format.
+ */
+#ifdef __LITTLE_ENDIAN
+ send_hdr |= BIT(43);
+#endif
+
+ if (!OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+ /* Don't allocate to L2 */
+ send_hdr |= BIT(42);
+ }
+
+ /* Don't automatically free to FPA */
+ send_hdr |= BIT(40);
+
+ send_hdr |= skb->len;
+
+ if (skb->ip_summed != CHECKSUM_NONE &&
+ skb->ip_summed != CHECKSUM_UNNECESSARY) {
+#ifndef BROKEN_SIMULATOR_CSUM
+ switch (skb->protocol) {
+ case htons(ETH_P_IP):
+ send_hdr |= ETH_HLEN << 16;
+ send_hdr |= BIT(45);
+ l4_hdr = ip_hdr(skb)->protocol;
+ send_hdr |= (ETH_HLEN + (4 * ip_hdr(skb)->ihl)) << 24;
+ break;
+
+ case htons(ETH_P_IPV6):
+ l4_hdr = ipv6_hdr(skb)->nexthdr;
+ send_hdr |= ETH_HLEN << 16;
+ break;
+
+ default:
+ break;
+ }
+#endif
+
+ checksum_alg = 1; /* UDP == 1 */
+ switch (l4_hdr) {
+ case IPPROTO_SCTP:
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X))
+ break;
+ checksum_alg++; /* SCTP == 3 */
+ /* Fall through */
+ case IPPROTO_TCP: /* TCP == 2 */
+ checksum_alg++;
+ /* Fall through */
+ case IPPROTO_UDP:
+ if (skb_transport_header_was_set(skb)) {
+ int l4ptr = skb_transport_header(skb) -
+ skb->data;
+ send_hdr &= ~GENMASK_ULL(31, 24);
+ send_hdr |= l4ptr << 24;
+ send_hdr |= checksum_alg << 46;
+ }
+ break;
+
+ default:
+ break;
+ }
+ }
+
+ return send_hdr;
+}
+
+static inline u64 build_pko_send_ext_desc(struct sk_buff *skb)
+{
+ u64 send_ext;
+
+ /* See PKO_SEND_EXT_S in the HRM for the send extended descriptor
+ * format.
+ */
+ skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+ send_ext = (u64)PKO_SENDSUBDC_EXT << 44;
+ send_ext |= 1ull << 40;
+ send_ext |= BIT(39);
+ send_ext |= ETH_HLEN << 16;
+
+ return send_ext;
+}
+
+static inline u64 build_pko_send_tso(struct sk_buff *skb, uint mtu)
+{
+ u64 send_tso;
+
+ /* See PKO_SEND_TSO_S in the HRM for the send tso descriptor format */
+ send_tso = 12ull << 56;
+ send_tso |= (u64)PKO_SENDSUBDC_TSO << 44;
+ send_tso |= (skb_transport_offset(skb) + tcp_hdrlen(skb)) << 24;
+ send_tso |= (mtu + ETH_HLEN) << 8;
+
+ return send_tso;
+}
+
+static inline u64 build_pko_send_mem_sub(u64 addr)
+{
+ u64 send_mem;
+
+ /* See PKO_SEND_MEM_S in the HRM for the send mem descriptor format */
+ send_mem = (u64)PKO_SENDSUBDC_MEM << 44;
+ send_mem |= (u64)MEMDSZ_B64 << 60;
+ send_mem |= (u64)MEMALG_SUB << 56;
+ send_mem |= BIT_ULL(48);
+ send_mem |= addr;
+
+ return send_mem;
+}
+
+static inline u64 build_pko_send_mem_ts(u64 addr)
+{
+ u64 send_mem;
+
+ /* See PKO_SEND_MEM_S in the HRM for the send mem descriptor format */
+ send_mem = 1ull << 62;
+ send_mem |= (u64)PKO_SENDSUBDC_MEM << 44;
+ send_mem |= (u64)MEMDSZ_B64 << 60;
+ send_mem |= (u64)MEMALG_SETTSTMP << 56;
+ send_mem |= addr;
+
+ return send_mem;
+}
+
+static inline u64 build_pko_send_free(u64 addr)
+{
+ u64 send_free;
+
+ /* See PKO_SEND_FREE_S in the HRM for the send free descriptor format */
+ send_free = (u64)PKO_SENDSUBDC_FREE << 44;
+ send_free |= addr;
+
+ return send_free;
+}
+
+static inline u64 build_pko_send_work(int grp, u64 addr)
+{
+ u64 send_work;
+
+ /* See PKO_SEND_WORK_S in the HRM for the send work descriptor format */
+ send_work = (u64)PKO_SENDSUBDC_WORK << 44;
+ send_work |= (u64)grp << 52;
+ send_work |= 2ull << 50;
+ send_work |= addr;
+
+ return send_work;
+}
+
+static int octeon3_eth_ndo_start_xmit(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ struct octeon3_ethernet *priv = netdev_priv(netdev);
+ struct octeon3_ethernet_node *oen;
+ u64 scr_off = LMTDMA_SCR_OFFSET;
+ struct sk_buff *skb_tmp;
+ u64 pko_send_desc;
+ u64 *lmtdma_addr;
+ unsigned int mss;
+ u64 lmtdma_data;
+ u64 aq_cnt = 0;
+ int frag_count;
+ long backlog;
+ u64 head_len;
+ void **work;
+ int grp;
+ int i;
+
+ frag_count = 0;
+ if (skb_has_frag_list(skb))
+ skb_walk_frags(skb, skb_tmp)
+ frag_count++;
+
+ /* Stop the queue if pko or sso are not keeping up */
+ oen = octeon3_eth_node + priv->node;
+ aq_cnt = oct_csr_read(SSO_GRP_AQ_CNT(oen->node, oen->tx_complete_grp));
+ aq_cnt &= GENMASK_ULL(32, 0);
+ backlog = atomic64_inc_return(&priv->tx_backlog);
+ if (unlikely(backlog > MAX_TX_QUEUE_DEPTH || aq_cnt > 100000))
+ netif_stop_queue(netdev);
+
+ /* We have space for 11 segment pointers, If there will be
+ * more than that, we must linearize. The count is: 1 (base
+ * SKB) + frag_count + nr_frags.
+ */
+ if (unlikely(skb_shinfo(skb)->nr_frags + frag_count > 10)) {
+ if (unlikely(__skb_linearize(skb)))
+ goto skip_xmit;
+ frag_count = 0;
+ }
+
+ work = (void **)skb->cb;
+ work[0] = netdev;
+ work[1] = NULL;
+
+ /* Adjust the port statistics. */
+ atomic64_inc(&priv->tx_packets);
+ atomic64_add(skb->len, &priv->tx_octets);
+
+ /* Make sure packet data writes are committed before
+ * submitting the command below
+ */
+ wmb();
+
+ /* Build the pko command */
+ pko_send_desc = build_pko_send_hdr_desc(skb);
+ /* We don't save/restore state of CPU local memory for kernel
+ * space access, so we must disable preemption while we build
+ * and transmit the PKO command.
+ */
+ preempt_disable();
+ scratch_write64(scr_off, pko_send_desc);
+ scr_off += sizeof(pko_send_desc);
+
+ /* Request packet to be ptp timestamped */
+ if ((unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) &&
+ unlikely(priv->tx_timestamp_hw)) {
+ pko_send_desc = build_pko_send_ext_desc(skb);
+ scratch_write64(scr_off, pko_send_desc);
+ scr_off += sizeof(pko_send_desc);
+ }
+
+ /* Add the tso descriptor if needed */
+ mss = skb_shinfo(skb)->gso_size;
+ if (unlikely(mss)) {
+ pko_send_desc = build_pko_send_tso(skb, netdev->mtu);
+ scratch_write64(scr_off, pko_send_desc);
+ scr_off += sizeof(pko_send_desc);
+ }
+
+ /* Add a gather descriptor for each segment. See PKO_SEND_GATHER_S for
+ * the send gather descriptor format.
+ */
+ pko_send_desc = (u64)PKO_SENDSUBDC_GATHER << 45;
+ head_len = skb_headlen(skb);
+ if (head_len > 0) {
+ pko_send_desc |= head_len << 48;
+ pko_send_desc |= virt_to_phys(skb->data);
+ scratch_write64(scr_off, pko_send_desc);
+ scr_off += sizeof(pko_send_desc);
+ }
+ for (i = 1; i <= skb_shinfo(skb)->nr_frags; i++) {
+ struct skb_frag_struct *fs = skb_shinfo(skb)->frags + i - 1;
+
+ pko_send_desc &= ~(GENMASK_ULL(63, 48) | GENMASK_ULL(41, 0));
+ pko_send_desc |= (u64)fs->size << 48;
+ pko_send_desc |= virt_to_phys((u8 *)page_address(fs->page.p) + fs->page_offset);
+ scratch_write64(scr_off, pko_send_desc);
+ scr_off += sizeof(pko_send_desc);
+ }
+ skb_walk_frags(skb, skb_tmp) {
+ pko_send_desc &= ~(GENMASK_ULL(63, 48) | GENMASK_ULL(41, 0));
+ pko_send_desc |= (u64)skb_tmp->len << 48;
+ pko_send_desc |= virt_to_phys(skb_tmp->data);
+ scratch_write64(scr_off, pko_send_desc);
+ scr_off += sizeof(pko_send_desc);
+ }
+
+ /* Subtract 1 from the tx_backlog. */
+ pko_send_desc = build_pko_send_mem_sub(virt_to_phys(&priv->tx_backlog));
+ scratch_write64(scr_off, pko_send_desc);
+ scr_off += sizeof(pko_send_desc);
+
+ /* Write the ptp timestamp in the skb itself */
+ if ((unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) &&
+ unlikely(priv->tx_timestamp_hw)) {
+ pko_send_desc = build_pko_send_mem_ts(virt_to_phys(&work[1]));
+ scratch_write64(scr_off, pko_send_desc);
+ scr_off += sizeof(pko_send_desc);
+ }
+
+ /* Send work when finished with the packet. */
+ grp = octeon3_eth_lgrp_to_ggrp(priv->node, priv->tx_complete_grp);
+ pko_send_desc = build_pko_send_work(grp, virt_to_phys(work));
+ scratch_write64(scr_off, pko_send_desc);
+ scr_off += sizeof(pko_send_desc);
+
+ /* See PKO_SEND_DMA_S in the HRM for the lmtdam data format */
+ lmtdma_data = 0;
+ lmtdma_data |= (u64)(LMTDMA_SCR_OFFSET >> 3) << 56;
+ lmtdma_data |= 0x51ull << 40;
+ lmtdma_data |= (u64)priv->node << 36;
+ lmtdma_data |= priv->pko_queue << 16;
+
+ lmtdma_addr = (u64 *)(LMTDMA_ORDERED_IO_ADDR | ((scr_off & 0x78) - 8));
+ *lmtdma_addr = lmtdma_data;
+
+ preempt_enable();
+
+ return NETDEV_TX_OK;
+skip_xmit:
+ atomic64_inc(&priv->tx_dropped);
+ dev_consume_skb_any(skb);
+ return NETDEV_TX_OK;
+}
+
+static int octeon3_eth_set_mac_address(struct net_device *netdev, void *addr)
+{
+ int r = eth_mac_addr(netdev, addr);
+
+ if (r)
+ return r;
+
+ bgx_port_set_rx_filtering(netdev);
+
+ return 0;
+}
+
+static u64 octeon3_cyclecounter_read(const struct cyclecounter *cc)
+{
+ struct octeon3_ethernet *priv;
+ u64 count;
+
+ priv = container_of(cc, struct octeon3_ethernet, cc);
+ count = oct_csr_read(MIO_PTP_CLOCK_HI(priv->node));
+ return count;
+}
+
+static int octeon3_bgx_hwtstamp(struct net_device *netdev, int en)
+{
+ struct octeon3_ethernet *priv = netdev_priv(netdev);
+ u64 data;
+
+ switch (bgx_port_get_mode(priv->node, priv->interface, priv->index)) {
+ case PORT_MODE_RGMII:
+ case PORT_MODE_SGMII:
+ data = oct_csr_read(BGX_GMP_GMI_RX_FRM_CTL(priv->node, priv->interface, priv->index));
+ if (en)
+ data |= BIT(12);
+ else
+ data &= ~BIT(12);
+ oct_csr_write(data, BGX_GMP_GMI_RX_FRM_CTL(priv->node, priv->interface, priv->index));
+ break;
+
+ case PORT_MODE_XAUI:
+ case PORT_MODE_RXAUI:
+ case PORT_MODE_10G_KR:
+ case PORT_MODE_XLAUI:
+ case PORT_MODE_40G_KR4:
+ case PORT_MODE_XFI:
+ data = oct_csr_read(BGX_SMU_RX_FRM_CTL(priv->node, priv->interface, priv->index));
+ if (en)
+ data |= BIT(12);
+ else
+ data &= ~BIT(12);
+ oct_csr_write(data, BGX_SMU_RX_FRM_CTL(priv->node, priv->interface, priv->index));
+ break;
+
+ default:
+ /* No timestamp support*/
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static int octeon3_pki_hwtstamp(struct net_device *netdev, int en)
+{
+ struct octeon3_ethernet *priv = netdev_priv(netdev);
+ int skip = en ? 8 : 0;
+
+ octeon3_pki_set_ptp_skip(priv->node, priv->pknd, skip);
+
+ return 0;
+}
+
+static int octeon3_ioctl_hwtstamp(struct net_device *netdev,
+ struct ifreq *rq, int cmd)
+{
+ struct octeon3_ethernet *priv = netdev_priv(netdev);
+ struct hwtstamp_config config;
+ u64 data;
+ int en;
+
+ /* The PTP block should be enabled */
+ data = oct_csr_read(MIO_PTP_CLOCK_CFG(priv->node));
+ if (!(data & BIT(0))) {
+ netdev_err(netdev, "Error: PTP clock not enabled\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (copy_from_user(&config, rq->ifr_data, sizeof(config)))
+ return -EFAULT;
+
+ if (config.flags) /* reserved for future extensions */
+ return -EINVAL;
+
+ switch (config.tx_type) {
+ case HWTSTAMP_TX_OFF:
+ priv->tx_timestamp_hw = 0;
+ break;
+ case HWTSTAMP_TX_ON:
+ priv->tx_timestamp_hw = 1;
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ switch (config.rx_filter) {
+ case HWTSTAMP_FILTER_NONE:
+ priv->rx_timestamp_hw = 0;
+ en = 0;
+ break;
+ case HWTSTAMP_FILTER_ALL:
+ case HWTSTAMP_FILTER_SOME:
+ case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
+ case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
+ case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
+ case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+ case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+ case HWTSTAMP_FILTER_PTP_V2_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+ priv->rx_timestamp_hw = 1;
+ en = 1;
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ octeon3_bgx_hwtstamp(netdev, en);
+ octeon3_pki_hwtstamp(netdev, en);
+
+ priv->cc.read = octeon3_cyclecounter_read;
+ priv->cc.mask = CYCLECOUNTER_MASK(64);
+ /* Ptp counter is always in nsec */
+ priv->cc.mult = 1;
+ priv->cc.shift = 0;
+ timecounter_init(&priv->tc, &priv->cc, ktime_to_ns(ktime_get_real()));
+
+ return 0;
+}
+
+static int octeon3_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
+{
+ struct octeon3_ethernet *priv;
+ int neg_ppb = 0;
+ u64 comp;
+ u64 diff;
+
+ priv = container_of(ptp, struct octeon3_ethernet, ptp_info);
+
+ if (ppb < 0) {
+ ppb = -ppb;
+ neg_ppb = 1;
+ }
+
+ /* The part per billion (ppb) is a delta from the base frequency */
+ comp = (NSEC_PER_SEC << 32) / octeon_get_io_clock_rate();
+
+ diff = comp;
+ diff *= ppb;
+ diff = div_u64(diff, 1000000000ULL);
+
+ comp = neg_ppb ? comp - diff : comp + diff;
+
+ oct_csr_write(comp, MIO_PTP_CLOCK_COMP(priv->node));
+
+ return 0;
+}
+
+static int octeon3_adjtime(struct ptp_clock_info *ptp, s64 delta)
+{
+ struct octeon3_ethernet *priv;
+ unsigned long flags;
+ s64 now;
+
+ priv = container_of(ptp, struct octeon3_ethernet, ptp_info);
+
+ spin_lock_irqsave(&priv->ptp_lock, flags);
+ now = timecounter_read(&priv->tc);
+ now += delta;
+ timecounter_init(&priv->tc, &priv->cc, now);
+ spin_unlock_irqrestore(&priv->ptp_lock, flags);
+
+ return 0;
+}
+
+static int octeon3_gettime(struct ptp_clock_info *ptp, struct timespec *ts)
+{
+ struct octeon3_ethernet *priv;
+ unsigned long flags;
+ u32 remainder;
+ u64 ns;
+
+ priv = container_of(ptp, struct octeon3_ethernet, ptp_info);
+
+ spin_lock_irqsave(&priv->ptp_lock, flags);
+ ns = timecounter_read(&priv->tc);
+ spin_unlock_irqrestore(&priv->ptp_lock, flags);
+ ts->tv_sec = div_u64_rem(ns, 1000000000ULL, &remainder);
+ ts->tv_nsec = remainder;
+
+ return 0;
+}
+
+static int octeon3_settime(struct ptp_clock_info *ptp,
+ const struct timespec *ts)
+{
+ struct octeon3_ethernet *priv;
+ unsigned long flags;
+ u64 ns;
+
+ priv = container_of(ptp, struct octeon3_ethernet, ptp_info);
+ ns = timespec_to_ns(ts);
+
+ spin_lock_irqsave(&priv->ptp_lock, flags);
+ timecounter_init(&priv->tc, &priv->cc, ns);
+ spin_unlock_irqrestore(&priv->ptp_lock, flags);
+
+ return 0;
+}
+
+static int octeon3_enable(struct ptp_clock_info *ptp,
+ struct ptp_clock_request *rq, int on)
+{
+ return -EOPNOTSUPP;
+}
+
+static int octeon3_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ int rc;
+
+ switch (cmd) {
+ case SIOCSHWTSTAMP:
+ rc = octeon3_ioctl_hwtstamp(netdev, ifr, cmd);
+ break;
+
+ default:
+ rc = bgx_port_do_ioctl(netdev, ifr, cmd);
+ break;
+ }
+
+ return rc;
+}
+
+static const struct net_device_ops octeon3_eth_netdev_ops = {
+ .ndo_init = octeon3_eth_bgx_ndo_init,
+ .ndo_uninit = octeon3_eth_ndo_uninit,
+ .ndo_open = octeon3_eth_bgx_ndo_open,
+ .ndo_stop = octeon3_eth_bgx_ndo_stop,
+ .ndo_start_xmit = octeon3_eth_ndo_start_xmit,
+ .ndo_get_stats64 = octeon3_eth_ndo_get_stats64,
+ .ndo_set_rx_mode = bgx_port_set_rx_filtering,
+ .ndo_set_mac_address = octeon3_eth_set_mac_address,
+ .ndo_change_mtu = bgx_port_change_mtu,
+ .ndo_do_ioctl = octeon3_ioctl,
+};
+
+static int octeon3_eth_probe(struct platform_device *pdev)
+{
+ struct octeon3_ethernet *priv;
+ struct net_device *netdev;
+ int r;
+
+ struct mac_platform_data *pd = dev_get_platdata(&pdev->dev);
+
+ r = octeon3_eth_global_init(pd->numa_node, pdev);
+ if (r)
+ return r;
+
+ dev_info(&pdev->dev, "Probing %d-%d:%d\n",
+ pd->numa_node, pd->interface, pd->port);
+ netdev = alloc_etherdev(sizeof(struct octeon3_ethernet));
+ if (!netdev) {
+ dev_err(&pdev->dev, "Failed to allocated ethernet device\n");
+ return -ENOMEM;
+ }
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+ dev_set_drvdata(&pdev->dev, netdev);
+
+ if (pd->mac_type == BGX_MAC)
+ bgx_port_set_netdev(pdev->dev.parent, netdev);
+ priv = netdev_priv(netdev);
+ priv->netdev = netdev;
+ priv->mac_type = pd->mac_type;
+ INIT_LIST_HEAD(&priv->list);
+ priv->node = pd->numa_node;
+
+ mutex_lock(&octeon3_eth_node[priv->node].device_list_lock);
+ list_add_tail_rcu(&priv->list, &octeon3_eth_node[priv->node].device_list);
+ mutex_unlock(&octeon3_eth_node[priv->node].device_list_lock);
+
+ priv->index = pd->port;
+ priv->interface = pd->interface;
+ spin_lock_init(&priv->stat_lock);
+ INIT_DEFERRABLE_WORK(&priv->stat_work, octeon3_eth_stat_poll);
+
+ if (pd->src_type == XCV)
+ snprintf(netdev->name, IFNAMSIZ, "rgmii%d", pd->port);
+
+ if (priv->mac_type == BGX_MAC)
+ netdev->netdev_ops = &octeon3_eth_netdev_ops;
+
+ netdev->min_mtu = 60;
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+ int fifo_size;
+ int max_mtu = 1500;
+
+ /* On 78XX-Pass1 the mtu must be limited. The PKO may
+ * to lock up when calculating the L4 checksum for
+ * large packets. How large the packets can be depends
+ * on the amount of pko fifo assigned to the port.
+ *
+ * FIFO size Max frame size
+ * 2.5 KB 1920
+ * 5.0 KB 4480
+ * 10.0 KB 9600
+ *
+ * The maximum mtu is set to the largest frame size minus the
+ * l2 header.
+ */
+ fifo_size = octeon3_pko_get_fifo_size(priv->node, priv->interface,
+ priv->index, priv->mac_type);
+
+ switch (fifo_size) {
+ case 2560:
+ max_mtu = 1920 - ETH_HLEN - ETH_FCS_LEN - (2 * VLAN_HLEN);
+ break;
+
+ case 5120:
+ max_mtu = 4480 - ETH_HLEN - ETH_FCS_LEN - (2 * VLAN_HLEN);
+ break;
+
+ case 10240:
+ max_mtu = 9600 - ETH_HLEN - ETH_FCS_LEN - (2 * VLAN_HLEN);
+ break;
+
+ default:
+ break;
+ }
+ netdev->max_mtu = max_mtu;
+ } else {
+ netdev->max_mtu = 65392;
+ }
+
+ if (register_netdev(netdev) < 0) {
+ dev_err(&pdev->dev, "Failed to register ethernet device\n");
+ list_del(&priv->list);
+ free_netdev(netdev);
+ }
+
+ spin_lock_init(&priv->ptp_lock);
+ priv->ptp_info.owner = THIS_MODULE;
+ snprintf(priv->ptp_info.name, 16, "octeon3 ptp");
+ priv->ptp_info.max_adj = 250000000;
+ priv->ptp_info.n_alarm = 0;
+ priv->ptp_info.n_ext_ts = 0;
+ priv->ptp_info.n_per_out = 0;
+ priv->ptp_info.pps = 0;
+ priv->ptp_info.adjfreq = octeon3_adjfreq;
+ priv->ptp_info.adjtime = octeon3_adjtime;
+ priv->ptp_info.gettime64 = octeon3_gettime;
+ priv->ptp_info.settime64 = octeon3_settime;
+ priv->ptp_info.enable = octeon3_enable;
+ priv->ptp_clock = ptp_clock_register(&priv->ptp_info, &pdev->dev);
+
+ netdev_info(netdev, "%d rx queues\n", rx_queues);
+ return 0;
+}
+
+/**
+ * octeon3_eth_global_exit() - Free all the used resources and restore the
+ * hardware to the default state.
+ * @node: Node to free/reset.
+ *
+ * Return: 0 if successful.
+ * < 0 for error codes.
+ */
+static int octeon3_eth_global_exit(int node)
+{
+ struct octeon3_ethernet_node *oen = octeon3_eth_node + node;
+ int i;
+
+ /* Free the tx_complete irq */
+ octeon3_sso_irq_set(node, oen->tx_complete_grp, false);
+ irq_set_affinity_hint(oen->tx_irq, NULL);
+ free_irq(oen->tx_irq, oen);
+ irq_dispose_mapping(oen->tx_irq);
+ oen->tx_irq = 0;
+
+ /* Stop the worker threads */
+ for (i = 0; i < ARRAY_SIZE(oen->workers); i++)
+ kthread_stop(oen->workers[i].task);
+
+ /* Shutdown pki */
+ octeon3_pki_shutdown(node);
+ octeon_fpa3_release_pool(node, oen->pki_packet_pool);
+ kfree(oen->pki_packet_pool_stack);
+
+ /* Shutdown pko */
+ octeon3_pko_exit_global(node);
+ for (;;) {
+ void **w;
+
+ w = octeon_fpa3_alloc(node, oen->pko_aura);
+ if (!w)
+ break;
+ kmem_cache_free(octeon3_eth_sso_pko_cache, w);
+ }
+ octeon_fpa3_release_aura(node, oen->pko_aura);
+ octeon_fpa3_release_pool(node, oen->pko_pool);
+ kfree(oen->pko_pool_stack);
+
+ /* Shutdown sso */
+ octeon3_sso_shutdown(node, oen->sso_aura);
+ octeon3_sso_free_grp(node, oen->tx_complete_grp);
+ for (;;) {
+ void **w;
+
+ w = octeon_fpa3_alloc(node, oen->sso_aura);
+ if (!w)
+ break;
+ kmem_cache_free(octeon3_eth_sso_pko_cache, w);
+ }
+ octeon_fpa3_release_aura(node, oen->sso_aura);
+ octeon_fpa3_release_pool(node, oen->sso_pool);
+ kfree(oen->sso_pool_stack);
+
+ return 0;
+}
+
+static int octeon3_eth_remove(struct platform_device *pdev)
+{
+ struct net_device *netdev = dev_get_drvdata(&pdev->dev);
+ struct octeon3_ethernet *priv = netdev_priv(netdev);
+ struct octeon3_ethernet_node *oen;
+ struct mac_platform_data *pd;
+ int node;
+
+ node = priv->node;
+ oen = octeon3_eth_node + node;
+ pd = dev_get_platdata(&pdev->dev);
+
+ ptp_clock_unregister(priv->ptp_clock);
+ unregister_netdev(netdev);
+ if (pd->mac_type == BGX_MAC)
+ bgx_port_set_netdev(pdev->dev.parent, NULL);
+ dev_set_drvdata(&pdev->dev, NULL);
+
+ /* Free all resources when there are no more devices */
+ mutex_lock(&octeon3_eth_init_mutex);
+ mutex_lock(&oen->device_list_lock);
+ list_del_rcu(&priv->list);
+ if (oen->init_done && list_empty(&oen->device_list)) {
+ oen->init_done = false;
+ octeon3_eth_global_exit(node);
+ }
+
+ mutex_unlock(&oen->device_list_lock);
+ mutex_unlock(&octeon3_eth_init_mutex);
+ free_netdev(netdev);
+
+ return 0;
+}
+
+static void octeon3_eth_shutdown(struct platform_device *pdev)
+{
+ octeon3_eth_remove(pdev);
+}
+
+static struct platform_driver octeon3_eth_driver = {
+ .probe = octeon3_eth_probe,
+ .remove = octeon3_eth_remove,
+ .shutdown = octeon3_eth_shutdown,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ethernet-mac-pki",
+ },
+};
+
+static int __init octeon3_eth_init(void)
+{
+ int nr = num_online_cpus();
+
+ if (nr >= 4)
+ rx_queues = 4;
+ else if (nr >= 2)
+ rx_queues = 2;
+ else
+ rx_queues = 1;
+
+ return platform_driver_register(&octeon3_eth_driver);
+}
+module_init(octeon3_eth_init);
+
+static void __exit octeon3_eth_exit(void)
+{
+ platform_driver_unregister(&octeon3_eth_driver);
+
+ /* Destroy the memory cache used by sso and pko */
+ kmem_cache_destroy(octeon3_eth_sso_pko_cache);
+}
+module_exit(octeon3_eth_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cavium, Inc. <support@caviumnetworks.com>");
+MODULE_DESCRIPTION("Cavium, Inc. PKI/PKO Ethernet driver.");
diff --git a/drivers/net/ethernet/cavium/octeon/octeon3-fpa.c b/drivers/net/ethernet/cavium/octeon/octeon3-fpa.c
new file mode 100644
index 000000000000..d6445cb74e74
--- /dev/null
+++ b/drivers/net/ethernet/cavium/octeon/octeon3-fpa.c
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Driver for the Octeon III Free Pool Unit (fpa).
+ *
+ * Copyright (C) 2015-2017 Cavium, Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <asm/octeon/octeon.h>
+
+#include "octeon3.h"
+
+/* Registers are accessed via xkphys */
+#define FPA_BASE(node) (SET_XKPHYS + NODE_OFFSET(node) + 0x1280000000000ull)
+
+#define FPA_GEN_CFG(n) (FPA_BASE(n) + 0x00000050)
+
+#define FPA_POOLX_CFG(n, p) (FPA_BASE(n) + ((p) << 3) + 0x10000000)
+#define FPA_POOLX_START_ADDR(n, p) (FPA_BASE(n) + ((p) << 3) + 0x10500000)
+#define FPA_POOLX_END_ADDR(n, p) (FPA_BASE(n) + ((p) << 3) + 0x10600000)
+#define FPA_POOLX_STACK_BASE(n, p) (FPA_BASE(n) + ((p) << 3) + 0x10700000)
+#define FPA_POOLX_STACK_END(n, p) (FPA_BASE(n) + ((p) << 3) + 0x10800000)
+#define FPA_POOLX_STACK_ADDR(n, p) (FPA_BASE(n) + ((p) << 3) + 0x10900000)
+
+#define FPA_AURAX_POOL(n, a) (FPA_BASE(n) + ((a) << 3) + 0x20000000)
+#define FPA_AURAX_CFG(n, a) (FPA_BASE(n) + ((a) << 3) + 0x20100000)
+#define FPA_AURAX_CNT(n, a) (FPA_BASE(n) + ((a) << 3) + 0x20200000)
+#define FPA_AURAX_CNT_LIMIT(n, a) (FPA_BASE(n) + ((a) << 3) + 0x20400000)
+#define FPA_AURAX_CNT_THRESHOLD(n, a) (FPA_BASE(n) + ((a) << 3) + 0x20500000)
+#define FPA_AURAX_POOL_LEVELS(n, a) (FPA_BASE(n) + ((a) << 3) + 0x20700000)
+#define FPA_AURAX_CNT_LEVELS(n, a) (FPA_BASE(n) + ((a) << 3) + 0x20800000)
+
+static DEFINE_MUTEX(octeon_fpa3_lock);
+
+static int get_num_pools(void)
+{
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+ return 64;
+ if (OCTEON_IS_MODEL(OCTEON_CNF75XX) || OCTEON_IS_MODEL(OCTEON_CN73XX))
+ return 32;
+ return 0;
+}
+
+static int get_num_auras(void)
+{
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+ return 1024;
+ if (OCTEON_IS_MODEL(OCTEON_CNF75XX) || OCTEON_IS_MODEL(OCTEON_CN73XX))
+ return 512;
+ return 0;
+}
+
+/**
+ * octeon_fpa3_init() - Initialize the fpa to default values.
+ * @node: Node of fpa to initialize.
+ *
+ * Return: 0 if successful.
+ * < 0 for error codes.
+ */
+int octeon_fpa3_init(int node)
+{
+ static bool init_done[2];
+ int aura_cnt;
+ u64 data;
+ int i;
+
+ mutex_lock(&octeon_fpa3_lock);
+
+ if (init_done[node])
+ goto done;
+
+ aura_cnt = get_num_auras();
+ for (i = 0; i < aura_cnt; i++) {
+ oct_csr_write(0x100000000ull, FPA_AURAX_CNT(node, i));
+ oct_csr_write(0xfffffffffull, FPA_AURAX_CNT_LIMIT(node, i));
+ oct_csr_write(0xffffffffeull, FPA_AURAX_CNT_THRESHOLD(node, i));
+ }
+
+ data = oct_csr_read(FPA_GEN_CFG(node));
+ data &= ~GENMASK_ULL(9, 4);
+ data |= 3 << 4;
+ oct_csr_write(data, FPA_GEN_CFG(node));
+
+ init_done[node] = 1;
+ done:
+ mutex_unlock(&octeon_fpa3_lock);
+ return 0;
+}
+EXPORT_SYMBOL(octeon_fpa3_init);
+
+/**
+ * octeon_fpa3_pool_init() - Initialize a pool.
+ * @node: Node to initialize pool on.
+ * @pool_num: Requested pool number (-1 for don't care).
+ * @pool: Updated with the initialized pool number.
+ * @pool_stack: Updated with the base of the memory allocated for the pool
+ * stack.
+ * @num_ptrs: Number of pointers to allocated on the stack.
+ *
+ * Return: 0 if successful.
+ * < 0 for error codes.
+ */
+int octeon_fpa3_pool_init(int node, int pool_num, int *pool,
+ void **pool_stack, int num_ptrs)
+{
+ struct global_resource_tag tag;
+ u64 pool_stack_start;
+ u64 pool_stack_end;
+ int stack_size;
+ char buf[16];
+ int rc = 0;
+ u64 data;
+
+ mutex_lock(&octeon_fpa3_lock);
+
+ strncpy((char *)&tag.lo, "cvm_pool", 8);
+ snprintf(buf, 16, "_%d......", node);
+ memcpy(&tag.hi, buf, 8);
+
+ res_mgr_create_resource(tag, get_num_pools());
+ *pool = res_mgr_alloc(tag, pool_num, true);
+ if (*pool < 0) {
+ rc = -ENODEV;
+ goto error;
+ }
+
+ oct_csr_write(0, FPA_POOLX_CFG(node, *pool));
+ oct_csr_write(128, FPA_POOLX_START_ADDR(node, *pool));
+ oct_csr_write(GENMASK_ULL(41, 7), FPA_POOLX_END_ADDR(node, *pool));
+
+ stack_size = (DIV_ROUND_UP(num_ptrs, 29) + 1) * 128;
+ *pool_stack = kmalloc_node(stack_size, GFP_KERNEL, node);
+ if (!*pool_stack) {
+ pr_err("Failed to allocate pool stack memory pool=%d\n",
+ pool_num);
+ rc = -ENOMEM;
+ goto error_stack;
+ }
+
+ pool_stack_start = virt_to_phys(*pool_stack);
+ pool_stack_end = round_down(pool_stack_start + stack_size, 128);
+ pool_stack_start = round_up(pool_stack_start, 128);
+ oct_csr_write(pool_stack_start, FPA_POOLX_STACK_BASE(node, *pool));
+ oct_csr_write(pool_stack_start, FPA_POOLX_STACK_ADDR(node, *pool));
+ oct_csr_write(pool_stack_end, FPA_POOLX_STACK_END(node, *pool));
+
+ data = (2 << 3) | BIT(0);
+ oct_csr_write(data, FPA_POOLX_CFG(node, *pool));
+
+ mutex_unlock(&octeon_fpa3_lock);
+ return 0;
+
+error_stack:
+ res_mgr_free(tag, *pool);
+error:
+ mutex_unlock(&octeon_fpa3_lock);
+ return rc;
+}
+EXPORT_SYMBOL(octeon_fpa3_pool_init);
+
+/**
+ * octeon_fpa3_release_pool() - Release a pool.
+ * @node: Node pool is on.
+ * @pool: Pool to release.
+ */
+void octeon_fpa3_release_pool(int node, int pool)
+{
+ struct global_resource_tag tag;
+ char buf[16];
+
+ mutex_lock(&octeon_fpa3_lock);
+
+ strncpy((char *)&tag.lo, "cvm_pool", 8);
+ snprintf(buf, 16, "_%d......", node);
+ memcpy(&tag.hi, buf, 8);
+
+ res_mgr_free(tag, pool);
+
+ mutex_unlock(&octeon_fpa3_lock);
+}
+EXPORT_SYMBOL(octeon_fpa3_release_pool);
+
+/**
+ * octeon_fpa3_aura_init() - Initialize an aura.
+ * @node: Node to initialize aura on.
+ * @pool: Pool the aura belongs to.
+ * @aura_num: Requested aura number (-1 for don't care).
+ * @aura: Updated with the initialized aura number.
+ * @num_bufs: Number of buffers in the aura.
+ * @limit: Limit for the aura.
+ *
+ * Return: 0 if successful.
+ * < 0 for error codes.
+ */
+int octeon_fpa3_aura_init(int node, int pool, int aura_num,
+ int *aura, int num_bufs, unsigned int limit)
+{
+ struct global_resource_tag tag;
+ unsigned int drop;
+ unsigned int pass;
+ char buf[16];
+ int rc = 0;
+ u64 shift;
+ u64 data;
+
+ mutex_lock(&octeon_fpa3_lock);
+
+ strncpy((char *)&tag.lo, "cvm_aura", 8);
+ snprintf(buf, 16, "_%d......", node);
+ memcpy(&tag.hi, buf, 8);
+
+ res_mgr_create_resource(tag, get_num_auras());
+ *aura = res_mgr_alloc(tag, aura_num, true);
+ if (*aura < 0) {
+ rc = -ENODEV;
+ goto error;
+ }
+
+ oct_csr_write(0, FPA_AURAX_CFG(node, *aura));
+
+ /* Allow twice the limit before saturation at zero */
+ limit *= 2;
+ data = limit;
+ oct_csr_write(data, FPA_AURAX_CNT_LIMIT(node, *aura));
+ oct_csr_write(data, FPA_AURAX_CNT(node, *aura));
+
+ oct_csr_write(pool, FPA_AURAX_POOL(node, *aura));
+
+ /* No per-pool RED/Drop */
+ oct_csr_write(0, FPA_AURAX_POOL_LEVELS(node, *aura));
+
+ shift = 0;
+ while ((limit >> shift) > 255)
+ shift++;
+
+ drop = (limit - num_bufs / 20) >> shift; /* 95% */
+ pass = (limit - (num_bufs * 3) / 20) >> shift; /* 85% */
+
+ /* Enable per aura RED/drop */
+ data = BIT(38) | (shift << 32) | (drop << 16) | (pass << 8);
+ oct_csr_write(data, FPA_AURAX_CNT_LEVELS(node, *aura));
+
+error:
+ mutex_unlock(&octeon_fpa3_lock);
+ return rc;
+}
+EXPORT_SYMBOL(octeon_fpa3_aura_init);
+
+/**
+ * octeon_fpa3_release_aura() - Release an aura.
+ * @node: Node to aura is on.
+ * @aura: Aura to release.
+ */
+void octeon_fpa3_release_aura(int node, int aura)
+{
+ struct global_resource_tag tag;
+ char buf[16];
+
+ mutex_lock(&octeon_fpa3_lock);
+
+ strncpy((char *)&tag.lo, "cvm_aura", 8);
+ snprintf(buf, 16, "_%d......", node);
+ memcpy(&tag.hi, buf, 8);
+
+ res_mgr_free(tag, aura);
+
+ mutex_unlock(&octeon_fpa3_lock);
+}
+EXPORT_SYMBOL(octeon_fpa3_release_aura);
+
+/**
+ * octeon_fpa3_alloc() - Get a buffer from a aura's pool.
+ * @node: Node to free memory to.
+ * @aura: Aura to free memory to.
+ *
+ * Return: Allocated buffer pointer if successful, NULL on error.
+ */
+void *octeon_fpa3_alloc(int node, int aura)
+{
+ void *buf = NULL;
+ u64 buf_phys;
+ u64 addr;
+
+ /* Buffer pointers are obtained using load operations */
+ addr = BIT(63) | BIT(48) | (0x29ull << 40) | ((u64)node << 36) |
+ (aura << 16);
+ buf_phys = READ_ONCE(*(u64 *)addr);
+
+ if (buf_phys)
+ buf = phys_to_virt(buf_phys);
+
+ return buf;
+}
+EXPORT_SYMBOL(octeon_fpa3_alloc);
+
+/**
+ * octeon_fpa3_free() - Add a buffer back to the aura's pool.
+ * @node: Node to free memory to.
+ * @aura: Aura to free memory to.
+ * @buf: Address of buffer to free to the aura's pool.
+ */
+void octeon_fpa3_free(int node, int aura, const void *buf)
+{
+ u64 buf_phys;
+ u64 addr;
+
+ buf_phys = virt_to_phys(buf);
+
+ /* Make sure that any previous writes to memory go out before we free
+ * this buffer. This also serves as a barrier to prevent GCC from
+ * reordering operations to after the free.
+ */
+ wmb();
+
+ /* Buffers are added to fpa pools using store operations */
+ addr = BIT(63) | BIT(48) | (0x29ull << 40) | ((u64)node << 36);
+ addr |= (aura << 16);
+ WRITE_ONCE(*(u64 *)addr, buf_phys);
+}
+EXPORT_SYMBOL(octeon_fpa3_free);
+
+/**
+ * octeon_fpa3_mem_fill() - Add buffers to an aura.
+ * @node: Node to get memory from.
+ * @cache: Memory cache to allocate from.
+ * @aura: Aura to add buffers to.
+ * @num_bufs: Number of buffers to add to the aura.
+ *
+ * Return: 0 if successful.
+ * < 0 for error codes.
+ */
+int octeon_fpa3_mem_fill(int node, struct kmem_cache *cache,
+ int aura, int num_bufs)
+{
+ void *mem;
+ int rc = 0;
+ int i;
+
+ mutex_lock(&octeon_fpa3_lock);
+
+ for (i = 0; i < num_bufs; i++) {
+ mem = kmem_cache_alloc_node(cache, GFP_KERNEL, node);
+ if (!mem) {
+ pr_err("Failed to allocate memory for aura=%d\n", aura);
+ rc = -ENOMEM;
+ break;
+ }
+ octeon_fpa3_free(node, aura, mem);
+ }
+
+ mutex_unlock(&octeon_fpa3_lock);
+ return rc;
+}
+EXPORT_SYMBOL(octeon_fpa3_mem_fill);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cavium, Inc. Octeon III FPA manager.");
diff --git a/drivers/net/ethernet/cavium/octeon/octeon3-pki.c b/drivers/net/ethernet/cavium/octeon/octeon3-pki.c
new file mode 100644
index 000000000000..e574dd9cd3b6
--- /dev/null
+++ b/drivers/net/ethernet/cavium/octeon/octeon3-pki.c
@@ -0,0 +1,823 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2017 Cavium, Inc.
+ *
+ * Configuration and management of the PacKet Input (PKI) block.
+ */
+#include <linux/firmware.h>
+#include <linux/module.h>
+
+#include <asm/octeon/octeon.h>
+
+#include "octeon3.h"
+
+#define PKI_CLUSTER_FIRMWARE "cavium/pki-cluster.bin"
+#define VERSION_LEN 8
+
+#define MAX_CLUSTERS 4
+#define MAX_BANKS 2
+#define MAX_BANK_ENTRIES 192
+#define PKI_NUM_QPG_ENTRY 2048
+#define PKI_NUM_STYLE 256
+#define PKI_NUM_FINAL_STYLE 64
+#define MAX_PKNDS 64
+
+/* Registers are accessed via xkphys */
+#define PKI_BASE 0x1180044000000ull
+#define PKI_ADDR(node) (SET_XKPHYS + NODE_OFFSET(node) + \
+ PKI_BASE)
+
+#define PKI_SFT_RST(n) (PKI_ADDR(n) + 0x000010)
+#define PKI_BUF_CTL(n) (PKI_ADDR(n) + 0x000100)
+#define PKI_STAT_CTL(n) (PKI_ADDR(n) + 0x000110)
+#define PKI_ICG_CFG(n) (PKI_ADDR(n) + 0x00a000)
+
+#define CLUSTER_OFFSET(c) ((c) << 16)
+#define CL_ADDR(n, c) (PKI_ADDR(n) + CLUSTER_OFFSET(c))
+#define PKI_CL_ECC_CTL(n, c) (CL_ADDR(n, c) + 0x00c020)
+
+#define PKI_STYLE_BUF(n, s) (PKI_ADDR(n) + ((s) << 3) + 0x024000)
+
+#define PKI_LTYPE_MAP(n, l) (PKI_ADDR(n) + ((l) << 3) + 0x005000)
+#define PKI_IMEM(n, i) (PKI_ADDR(n) + ((i) << 3) + 0x100000)
+
+#define PKI_CL_PKIND_CFG(n, c, p) (CL_ADDR(n, c) + ((p) << 8) + 0x300040)
+#define PKI_CL_PKIND_STYLE(n, c, p) (CL_ADDR(n, c) + ((p) << 8) + 0x300048)
+#define PKI_CL_PKIND_SKIP(n, c, p) (CL_ADDR(n, c) + ((p) << 8) + 0x300050)
+#define PKI_CL_PKIND_L2_CUSTOM(n, c, p) (CL_ADDR(n, c) + ((p) << 8) + 0x300058)
+#define PKI_CL_PKIND_LG_CUSTOM(n, c, p) (CL_ADDR(n, c) + ((p) << 8) + 0x300060)
+
+#define STYLE_OFFSET(s) ((s) << 3)
+#define STYLE_ADDR(n, c, s) (PKI_ADDR(n) + CLUSTER_OFFSET(c) + \
+ STYLE_OFFSET(s))
+#define PKI_CL_STYLE_CFG(n, c, s) (STYLE_ADDR(n, c, s) + 0x500000)
+#define PKI_CL_STYLE_CFG2(n, c, s) (STYLE_ADDR(n, c, s) + 0x500800)
+#define PKI_CLX_STYLEX_ALG(n, c, s) (STYLE_ADDR(n, c, s) + 0x501000)
+
+#define PCAM_OFFSET(bank) ((bank) << 12)
+#define PCAM_ENTRY_OFFSET(entry) ((entry) << 3)
+#define PCAM_ADDR(n, c, b, e) (PKI_ADDR(n) + CLUSTER_OFFSET(c) + \
+ PCAM_OFFSET(b) + PCAM_ENTRY_OFFSET(e))
+#define PKI_CL_PCAM_TERM(n, c, b, e) (PCAM_ADDR(n, c, b, e) + 0x700000)
+#define PKI_CL_PCAM_MATCH(n, c, b, e) (PCAM_ADDR(n, c, b, e) + 0x704000)
+#define PKI_CL_PCAM_ACTION(n, c, b, e) (PCAM_ADDR(n, c, b, e) + 0x708000)
+
+#define PKI_QPG_TBLX(n, i) (PKI_ADDR(n) + ((i) << 3) + 0x800000)
+#define PKI_AURAX_CFG(n, a) (PKI_ADDR(n) + ((a) << 3) + 0x900000)
+#define PKI_STATX_STAT0(n, p) (PKI_ADDR(n) + ((p) << 8) + 0xe00038)
+#define PKI_STATX_STAT1(n, p) (PKI_ADDR(n) + ((p) << 8) + 0xe00040)
+#define PKI_STATX_STAT3(n, p) (PKI_ADDR(n) + ((p) << 8) + 0xe00050)
+
+enum pcam_term {
+ NONE = 0x0,
+ L2_CUSTOM = 0x2,
+ HIGIGD = 0x4,
+ HIGIG = 0x5,
+ SMACH = 0x8,
+ SMACL = 0x9,
+ DMACH = 0xa,
+ DMACL = 0xb,
+ GLORT = 0x12,
+ DSA = 0x13,
+ ETHTYPE0 = 0x18,
+ ETHTYPE1 = 0x19,
+ ETHTYPE2 = 0x1a,
+ ETHTYPE3 = 0x1b,
+ MPLS0 = 0x1e,
+ L3_SIPHH = 0x1f,
+ L3_SIPMH = 0x20,
+ L3_SIPML = 0x21,
+ L3_SIPLL = 0x22,
+ L3_FLAGS = 0x23,
+ L3_DIPHH = 0x24,
+ L3_DIPMH = 0x25,
+ L3_DIPML = 0x26,
+ L3_DIPLL = 0x27,
+ LD_VNI = 0x28,
+ IL3_FLAGS = 0x2b,
+ LF_SPI = 0x2e,
+ L4_SPORT = 0x2f,
+ L4_PORT = 0x30,
+ LG_CUSTOM = 0x39
+};
+
+enum pki_ltype {
+ LTYPE_NONE = 0x00,
+ LTYPE_ENET = 0x01,
+ LTYPE_VLAN = 0x02,
+ LTYPE_SNAP_PAYLD = 0x05,
+ LTYPE_ARP = 0x06,
+ LTYPE_RARP = 0x07,
+ LTYPE_IP4 = 0x08,
+ LTYPE_IP4_OPT = 0x09,
+ LTYPE_IP6 = 0x0a,
+ LTYPE_IP6_OPT = 0x0b,
+ LTYPE_IPSEC_ESP = 0x0c,
+ LTYPE_IPFRAG = 0x0d,
+ LTYPE_IPCOMP = 0x0e,
+ LTYPE_TCP = 0x10,
+ LTYPE_UDP = 0x11,
+ LTYPE_SCTP = 0x12,
+ LTYPE_UDP_VXLAN = 0x13,
+ LTYPE_GRE = 0x14,
+ LTYPE_NVGRE = 0x15,
+ LTYPE_GTP = 0x16,
+ LTYPE_UDP_GENEVE = 0x17,
+ LTYPE_SW28 = 0x1c,
+ LTYPE_SW29 = 0x1d,
+ LTYPE_SW30 = 0x1e,
+ LTYPE_SW31 = 0x1f
+};
+
+enum pki_beltype {
+ BELTYPE_NONE = 0x00,
+ BELTYPE_MISC = 0x01,
+ BELTYPE_IP4 = 0x02,
+ BELTYPE_IP6 = 0x03,
+ BELTYPE_TCP = 0x04,
+ BELTYPE_UDP = 0x05,
+ BELTYPE_SCTP = 0x06,
+ BELTYPE_SNAP = 0x07
+};
+
+struct ltype_beltype {
+ enum pki_ltype ltype;
+ enum pki_beltype beltype;
+};
+
+/**
+ * struct pcam_term_info - Describes a term to configure in the pcam.
+ * @term: Identifies the term to configure.
+ * @term_mask: Specifies don't cares in the term.
+ * @style: Style to compare.
+ * @style_mask: Specifies don't cares in the style.
+ * @data: Data to compare.
+ * @data_mask: Specifies don't cares in the data.
+ */
+struct pcam_term_info {
+ u8 term;
+ u8 term_mask;
+ u8 style;
+ u8 style_mask;
+ u32 data;
+ u32 data_mask;
+};
+
+/**
+ * struct fw_hdr - Describes the firmware.
+ * @version: Firmware version.
+ * @size: Size of the data in bytes.
+ * @data: Actual firmware data.
+ */
+struct fw_hdr {
+ char version[VERSION_LEN];
+ u64 size;
+ u64 data[];
+};
+
+static struct ltype_beltype dflt_ltype_config[] = {
+ { LTYPE_NONE, BELTYPE_NONE },
+ { LTYPE_ENET, BELTYPE_MISC },
+ { LTYPE_VLAN, BELTYPE_MISC },
+ { LTYPE_SNAP_PAYLD, BELTYPE_MISC },
+ { LTYPE_ARP, BELTYPE_MISC },
+ { LTYPE_RARP, BELTYPE_MISC },
+ { LTYPE_IP4, BELTYPE_IP4 },
+ { LTYPE_IP4_OPT, BELTYPE_IP4 },
+ { LTYPE_IP6, BELTYPE_IP6 },
+ { LTYPE_IP6_OPT, BELTYPE_IP6 },
+ { LTYPE_IPSEC_ESP, BELTYPE_MISC },
+ { LTYPE_IPFRAG, BELTYPE_MISC },
+ { LTYPE_IPCOMP, BELTYPE_MISC },
+ { LTYPE_TCP, BELTYPE_TCP },
+ { LTYPE_UDP, BELTYPE_UDP },
+ { LTYPE_SCTP, BELTYPE_SCTP },
+ { LTYPE_UDP_VXLAN, BELTYPE_UDP },
+ { LTYPE_GRE, BELTYPE_MISC },
+ { LTYPE_NVGRE, BELTYPE_MISC },
+ { LTYPE_GTP, BELTYPE_MISC },
+ { LTYPE_UDP_GENEVE, BELTYPE_UDP },
+ { LTYPE_SW28, BELTYPE_MISC },
+ { LTYPE_SW29, BELTYPE_MISC },
+ { LTYPE_SW30, BELTYPE_MISC },
+ { LTYPE_SW31, BELTYPE_MISC }
+};
+
+static int get_num_clusters(void)
+{
+ if (OCTEON_IS_MODEL(OCTEON_CN73XX) || OCTEON_IS_MODEL(OCTEON_CNF75XX))
+ return 2;
+ return 4;
+}
+
+static int octeon3_pki_pcam_alloc_entry(int node, int entry, int bank)
+{
+ struct global_resource_tag tag;
+ char buf[16];
+ int num_clusters;
+ int rc;
+ int i;
+
+ /* Allocate a pcam entry for cluster0*/
+ strncpy((char *)&tag.lo, "cvm_pcam", 8);
+ snprintf(buf, 16, "_%d%d%d....", node, 0, bank);
+ memcpy(&tag.hi, buf, 8);
+
+ res_mgr_create_resource(tag, MAX_BANK_ENTRIES);
+ rc = res_mgr_alloc(tag, entry, false);
+ if (rc < 0)
+ return rc;
+
+ entry = rc;
+
+ /* Need to allocate entries for all clusters as se code needs it */
+ num_clusters = get_num_clusters();
+ for (i = 1; i < num_clusters; i++) {
+ strncpy((char *)&tag.lo, "cvm_pcam", 8);
+ snprintf(buf, 16, "_%d%d%d....", node, i, bank);
+ memcpy(&tag.hi, buf, 8);
+
+ res_mgr_create_resource(tag, MAX_BANK_ENTRIES);
+ rc = res_mgr_alloc(tag, entry, false);
+ if (rc < 0) {
+ int j;
+
+ pr_err("octeon3-pki: Failed to allocate pcam entry\n");
+ /* Undo whatever we've did */
+ for (j = 0; i < i; j++) {
+ strncpy((char *)&tag.lo, "cvm_pcam", 8);
+ snprintf(buf, 16, "_%d%d%d....", node, j, bank);
+ memcpy(&tag.hi, buf, 8);
+ res_mgr_free(tag, entry);
+ }
+
+ return -1;
+ }
+ }
+
+ return entry;
+}
+
+static int octeon3_pki_pcam_write_entry(int node,
+ struct pcam_term_info *term_info)
+{
+ int num_clusters;
+ u64 action;
+ int entry;
+ u64 match;
+ int bank;
+ u64 term;
+ int i;
+
+ /* Bit 0 of the pcam term determines the bank to use */
+ bank = term_info->term & 1;
+
+ /* Allocate a pcam entry */
+ entry = octeon3_pki_pcam_alloc_entry(node, -1, bank);
+ if (entry < 0)
+ return entry;
+
+ term = 1ull << 63;
+ term |= (u64)(term_info->term & term_info->term_mask) << 40;
+ term |= (~term_info->term & term_info->term_mask) << 8;
+ term |= (u64)(term_info->style & term_info->style_mask) << 32;
+ term |= ~term_info->style & term_info->style_mask;
+
+ match = (u64)(term_info->data & term_info->data_mask) << 32;
+ match |= ~term_info->data & term_info->data_mask;
+
+ action = 0;
+ if (term_info->term >= ETHTYPE0 && term_info->term <= ETHTYPE3) {
+ action |= 2 << 8;
+ action |= 4;
+ }
+
+ /* Must write the term to all clusters */
+ num_clusters = get_num_clusters();
+ for (i = 0; i < num_clusters; i++) {
+ oct_csr_write(0, PKI_CL_PCAM_TERM(node, i, bank, entry));
+ oct_csr_write(match, PKI_CL_PCAM_MATCH(node, i, bank, entry));
+ oct_csr_write(action, PKI_CL_PCAM_ACTION(node, i, bank, entry));
+ oct_csr_write(term, PKI_CL_PCAM_TERM(node, i, bank, entry));
+ }
+
+ return 0;
+}
+
+static int octeon3_pki_alloc_qpg_entry(int node)
+{
+ struct global_resource_tag tag;
+ char buf[16];
+ int entry;
+
+ /* Allocate a qpg entry */
+ strncpy((char *)&tag.lo, "cvm_qpge", 8);
+ snprintf(buf, 16, "t_%d.....", node);
+ memcpy(&tag.hi, buf, 8);
+
+ res_mgr_create_resource(tag, PKI_NUM_QPG_ENTRY);
+ entry = res_mgr_alloc(tag, -1, false);
+ if (entry < 0)
+ pr_err("octeon3-pki: Failed to allocate qpg entry");
+
+ return entry;
+}
+
+static int octeon3_pki_alloc_style(int node)
+{
+ struct global_resource_tag tag;
+ char buf[16];
+ int entry;
+
+ /* Allocate a style entry */
+ strncpy((char *)&tag.lo, "cvm_styl", 8);
+ snprintf(buf, 16, "e_%d.....", node);
+ memcpy(&tag.hi, buf, 8);
+
+ res_mgr_create_resource(tag, PKI_NUM_STYLE);
+ entry = res_mgr_alloc(tag, -1, false);
+ if (entry < 0)
+ pr_err("octeon3-pki: Failed to allocate style");
+
+ return entry;
+}
+
+int octeon3_pki_set_ptp_skip(int node, int pknd, int skip)
+{
+ int num_clusters;
+ u64 data;
+ u64 i;
+
+ num_clusters = get_num_clusters();
+ for (i = 0; i < num_clusters; i++) {
+ data = oct_csr_read(PKI_CL_PKIND_SKIP(node, i, pknd));
+ data &= ~(GENMASK_ULL(15, 8) | GENMASK_ULL(7, 0));
+ data |= (skip << 8) | skip;
+ oct_csr_write(data, PKI_CL_PKIND_SKIP(node, i, pknd));
+
+ data = oct_csr_read(PKI_CL_PKIND_L2_CUSTOM(node, i, pknd));
+ data &= ~GENMASK_ULL(7, 0);
+ data |= skip;
+ oct_csr_write(data, PKI_CL_PKIND_L2_CUSTOM(node, i, pknd));
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(octeon3_pki_set_ptp_skip);
+
+/**
+ * octeon3_pki_get_stats() - Get the statistics for a given pknd (port).
+ * @node: Node to get statistics for.
+ * @pknd: Pknd to get statistis for.
+ * @packets: Updated with the number of packets received.
+ * @octets: Updated with the number of octets received.
+ * @dropped: Updated with the number of dropped packets.
+ *
+ * Return: 0 if successful.
+ * < 0 for error codes.
+ */
+int octeon3_pki_get_stats(int node, int pknd,
+ u64 *packets, u64 *octets, u64 *dropped)
+{
+ /* PKI-20775, must read until not all ones. */
+ do {
+ *packets = oct_csr_read(PKI_STATX_STAT0(node, pknd));
+ } while (*packets == 0xffffffffffffffffull);
+
+ do {
+ *octets = oct_csr_read(PKI_STATX_STAT1(node, pknd));
+ } while (*octets == 0xffffffffffffffffull);
+
+ do {
+ *dropped = oct_csr_read(PKI_STATX_STAT3(node, pknd));
+ } while (*dropped == 0xffffffffffffffffull);
+
+ return 0;
+}
+EXPORT_SYMBOL(octeon3_pki_get_stats);
+
+/**
+ * octeon3_pki_port_init() - Initialize a port.
+ * @node: Node port is using.
+ * @aura: Aura to use for packet buffers.
+ * @grp: SSO group packets will be queued up for.
+ * @skip: Extra bytes to skip before packet data.
+ * @mb_size: Size of packet buffers.
+ * @pknd: Port kind assigned to the port.
+ * @num_rx_cxt: Number of sso groups used by the port.
+ *
+ * Return: 0 if successful.
+ * < 0 for error codes.
+ */
+int octeon3_pki_port_init(int node, int aura, int grp, int skip,
+ int mb_size, int pknd, int num_rx_cxt)
+{
+ int num_clusters;
+ int qpg_entry;
+ int style;
+ u64 data;
+ u64 i;
+
+ /* Allocate and configure a qpg table entry for the port's group */
+ i = 0;
+ while ((num_rx_cxt & (1 << i)) == 0)
+ i++;
+ qpg_entry = octeon3_pki_alloc_qpg_entry(node);
+ data = i << 45; /* GRPTAG_OK */
+ data |= ((u64)((node << 8) | grp) << 32); /* GRP_OK */
+ data |= i << 29; /* GRPTAG_BAD*/
+ data |= ((u64)((node << 8) | grp) << 16); /* GRP_BAD */
+ data |= aura; /* LAURA */
+ oct_csr_write(data, PKI_QPG_TBLX(node, qpg_entry));
+
+ /* Allocate a style for the port */
+ style = octeon3_pki_alloc_style(node);
+
+ /* Map the qpg table entry to the style */
+ num_clusters = get_num_clusters();
+ for (i = 0; i < num_clusters; i++) {
+ data = BIT(29) | BIT(22) | qpg_entry;
+ oct_csr_write(data, PKI_CL_STYLE_CFG(node, i, style));
+
+ /* Specify the tag generation rules and checksum to use */
+ oct_csr_write(0xfff49f, PKI_CL_STYLE_CFG2(node, i, style));
+
+ data = BIT(31);
+ oct_csr_write(data, PKI_CLX_STYLEX_ALG(node, i, style));
+ }
+
+ /* Set the style's buffer size and skips:
+ * Every buffer has 128 bytes reserved for Linux.
+ * The first buffer must also skip the wqe (40 bytes).
+ * Srio also requires skipping its header (skip)
+ */
+ data = 1ull << 28; /* WQE_SKIP */
+#ifdef __LITTLE_ENDIAN
+ data |= BIT(32); /* PKT_LEND */
+#endif
+ data |= ((128 + 40 + skip) / 8) << 22; /* FIRST_SKIP */
+ data |= (128 / 8) << 16; /* LATER_SKIP */
+ data |= (mb_size & ~0xf) / 8; /* MB_SIZE */
+ oct_csr_write(data, PKI_STYLE_BUF(node, style));
+
+ /* Assign the initial style to the port via the pknd */
+ for (i = 0; i < num_clusters; i++) {
+ data = oct_csr_read(PKI_CL_PKIND_STYLE(node, i, pknd));
+ data &= ~GENMASK_ULL(7, 0);
+ data |= style;
+ oct_csr_write(data, PKI_CL_PKIND_STYLE(node, i, pknd));
+ }
+
+ /* Enable red */
+ data = BIT(18);
+ oct_csr_write(data, PKI_AURAX_CFG(node, aura));
+
+ /* Clear statistic counters */
+ oct_csr_write(0, PKI_STATX_STAT0(node, pknd));
+ oct_csr_write(0, PKI_STATX_STAT1(node, pknd));
+ oct_csr_write(0, PKI_STATX_STAT3(node, pknd));
+
+ return 0;
+}
+EXPORT_SYMBOL(octeon3_pki_port_init);
+
+/**
+ * octeon3_pki_port_shutdown() - Release all the resources used by a port.
+ * @node: Node port is on.
+ * @pknd: Pknd assigned to the port.
+ *
+ * Return: 0 if successful.
+ * < 0 for error codes.
+ */
+int octeon3_pki_port_shutdown(int node, int pknd)
+{
+ /* Nothing at the moment */
+ return 0;
+}
+EXPORT_SYMBOL(octeon3_pki_port_shutdown);
+
+/**
+ * octeon3_pki_cluster_init() - Loads the cluster firmware into the
+ * pki clusters.
+ * @node: Node to configure.
+ * @pdev: Device requesting the firmware.
+ *
+ * Return: 0 if successful.
+ * < 0 for error codes.
+ */
+int octeon3_pki_cluster_init(int node, struct platform_device *pdev)
+{
+ const struct firmware *pki_fw;
+ const struct fw_hdr *hdr;
+ const u64 *data;
+ int rc;
+ int i;
+
+ rc = request_firmware(&pki_fw, PKI_CLUSTER_FIRMWARE, &pdev->dev);
+ if (rc) {
+ dev_err(&pdev->dev, "octeon3-pki: Failed to load %s error=%d\n",
+ PKI_CLUSTER_FIRMWARE, rc);
+ return rc;
+ }
+
+ /* Verify the firmware is valid */
+ hdr = (const struct fw_hdr *)pki_fw->data;
+ if ((pki_fw->size - sizeof(const struct fw_hdr) != hdr->size) ||
+ hdr->size % 8) {
+ dev_err(&pdev->dev, ("octeon3-pki: Corrupted PKI firmware\n"));
+ goto err;
+ }
+
+ dev_info(&pdev->dev, "octeon3-pki: Loading PKI firmware %s\n",
+ hdr->version);
+ data = hdr->data;
+ for (i = 0; i < hdr->size / 8; i++) {
+ oct_csr_write(cpu_to_be64(*data), PKI_IMEM(node, i));
+ data++;
+ }
+err:
+ release_firmware(pki_fw);
+
+ return 0;
+}
+EXPORT_SYMBOL(octeon3_pki_cluster_init);
+
+/**
+ * octeon3_pki_vlan_init() - Configures the pcam to recognize the vlan ethtypes.
+ *
+ * @node: Node to configure.
+ *
+ * Return: 0 if successful.
+ * < 0 for error codes.
+ */
+int octeon3_pki_vlan_init(int node)
+{
+ u64 data;
+ int rc;
+ int i;
+
+ /* PKI-20858 */
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+ for (i = 0; i < 4; i++) {
+ data = oct_csr_read(PKI_CL_ECC_CTL(node, i));
+ data &= ~BIT(63);
+ data |= BIT(4) | BIT(3);
+ oct_csr_write(data, PKI_CL_ECC_CTL(node, i));
+ }
+ }
+
+ /* Configure the pcam ethtype0 and ethtype1 terms */
+ for (i = ETHTYPE0; i <= ETHTYPE1; i++) {
+ struct pcam_term_info term_info;
+
+ /* Term for 0x8100 ethtype */
+ term_info.term = i;
+ term_info.term_mask = 0xfd;
+ term_info.style = 0;
+ term_info.style_mask = 0;
+ term_info.data = 0x81000000;
+ term_info.data_mask = 0xffff0000;
+ rc = octeon3_pki_pcam_write_entry(node, &term_info);
+ if (rc)
+ return rc;
+
+ /* Term for 0x88a8 ethtype */
+ term_info.data = 0x88a80000;
+ rc = octeon3_pki_pcam_write_entry(node, &term_info);
+ if (rc)
+ return rc;
+
+ /* Term for 0x9200 ethtype */
+ term_info.data = 0x92000000;
+ rc = octeon3_pki_pcam_write_entry(node, &term_info);
+ if (rc)
+ return rc;
+
+ /* Term for 0x9100 ethtype */
+ term_info.data = 0x91000000;
+ rc = octeon3_pki_pcam_write_entry(node, &term_info);
+ if (rc)
+ return rc;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(octeon3_pki_vlan_init);
+
+/**
+ * octeon3_pki_ltype_init() - Configures the pki layer types.
+ *
+ * @node: Node to configure.
+ *
+ * Return: 0 if successful.
+ * < 0 for error codes.
+ */
+int octeon3_pki_ltype_init(int node)
+{
+ enum pki_ltype ltype;
+ u64 data;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dflt_ltype_config); i++) {
+ ltype = dflt_ltype_config[i].ltype;
+ data = oct_csr_read(PKI_LTYPE_MAP(node, ltype));
+ data &= ~GENMASK_ULL(2, 0);
+ data |= dflt_ltype_config[i].beltype;
+ oct_csr_write(data, PKI_LTYPE_MAP(node, ltype));
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(octeon3_pki_ltype_init);
+
+int octeon3_pki_srio_init(int node, int pknd)
+{
+ int num_clusters;
+ int style;
+ u64 data;
+ int i;
+
+ num_clusters = get_num_clusters();
+ for (i = 0; i < num_clusters; i++) {
+ data = oct_csr_read(PKI_CL_PKIND_STYLE(node, i, pknd));
+ style = data & GENMASK_ULL(7, 0);
+ data &= ~GENMASK_ULL(14, 8);
+ oct_csr_write(data, PKI_CL_PKIND_STYLE(node, i, pknd));
+
+ /* Disable packet length errors and fcs */
+ data = oct_csr_read(PKI_CL_STYLE_CFG(node, i, style));
+ data &= ~(BIT(29) | BIT(26) | BIT(25) | BIT(23) | BIT(22));
+ oct_csr_write(data, PKI_CL_STYLE_CFG(node, i, style));
+
+ /* Packets have no fcs */
+ data = oct_csr_read(PKI_CL_PKIND_CFG(node, i, pknd));
+ data &= ~BIT(7);
+ oct_csr_write(data, PKI_CL_PKIND_CFG(node, i, pknd));
+
+ /* Skip the srio header and the INST_HDR_S data */
+ data = oct_csr_read(PKI_CL_PKIND_SKIP(node, i, pknd));
+ data &= ~(GENMASK_ULL(15, 8) | GENMASK_ULL(7, 0));
+ data |= (16 << 8) | 16;
+ oct_csr_write(data, PKI_CL_PKIND_SKIP(node, i, pknd));
+
+ /* Exclude port number from qpg */
+ data = oct_csr_read(PKI_CLX_STYLEX_ALG(node, i, style));
+ data &= ~GENMASK_ULL(20, 17);
+ oct_csr_write(data, PKI_CLX_STYLEX_ALG(node, i, style));
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(octeon3_pki_srio_init);
+
+/**
+ * octeon3_pki_enable() - Enable the pki.
+ *
+ * @node: Node to configure.
+ *
+ * Return: 0 if successful.
+ * < 0 for error codes.
+ */
+int octeon3_pki_enable(int node)
+{
+ int timeout;
+ u64 data;
+
+ /* Enable backpressure */
+ data = oct_csr_read(PKI_BUF_CTL(node));
+ data |= BIT(2);
+ oct_csr_write(data, PKI_BUF_CTL(node));
+
+ /* Enable cluster parsing */
+ data = oct_csr_read(PKI_ICG_CFG(node));
+ data |= BIT(24);
+ oct_csr_write(data, PKI_ICG_CFG(node));
+
+ /* Wait until the pki is out of reset */
+ timeout = 10000;
+ do {
+ data = oct_csr_read(PKI_SFT_RST(node));
+ if (!(data & BIT(63)))
+ break;
+ timeout--;
+ udelay(1);
+ } while (timeout);
+ if (!timeout) {
+ pr_err("octeon3-pki: timeout waiting for reset\n");
+ return -1;
+ }
+
+ /* Enable the pki */
+ data = oct_csr_read(PKI_BUF_CTL(node));
+ data |= BIT(0);
+ oct_csr_write(data, PKI_BUF_CTL(node));
+
+ /* Statistics are kept per pkind */
+ oct_csr_write(0, PKI_STAT_CTL(node));
+
+ return 0;
+}
+EXPORT_SYMBOL(octeon3_pki_enable);
+
+void octeon3_pki_shutdown(int node)
+{
+ struct global_resource_tag tag;
+ char buf[16];
+ int timeout;
+ u64 data;
+ int i;
+ int j;
+ int k;
+
+ /* Disable the pki */
+ data = oct_csr_read(PKI_BUF_CTL(node));
+ if (data & BIT(0)) {
+ data &= ~BIT(0);
+ oct_csr_write(data, PKI_BUF_CTL(node));
+
+ /* Wait until the pki has finished processing packets */
+ timeout = 10000;
+ do {
+ data = oct_csr_read(PKI_SFT_RST(node));
+ if (data & BIT(32))
+ break;
+ timeout--;
+ udelay(1);
+ } while (timeout);
+ if (!timeout)
+ pr_warn("octeon3_pki: disable timeout\n");
+ }
+
+ /* Free all prefetched fpa buffers back to the fpa */
+ data = oct_csr_read(PKI_BUF_CTL(node));
+ data |= BIT(5) | BIT(9);
+ oct_csr_write(data, PKI_BUF_CTL(node));
+ /* Dummy read to get the register write to take effect */
+ data = oct_csr_read(PKI_BUF_CTL(node));
+
+ /* Now we can reset the pki */
+ data = oct_csr_read(PKI_SFT_RST(node));
+ data |= BIT(0);
+ oct_csr_write(data, PKI_SFT_RST(node));
+ timeout = 10000;
+ do {
+ data = oct_csr_read(PKI_SFT_RST(node));
+ if ((data & BIT(63)) == 0)
+ break;
+ timeout--;
+ udelay(1);
+ } while (timeout);
+ if (!timeout)
+ pr_warn("octeon3_pki: reset timeout\n");
+
+ /* Free all the allocated resources. We should only free the
+ * resources allocated by us (TODO).
+ */
+ for (i = 0; i < PKI_NUM_STYLE; i++) {
+ strncpy((char *)&tag.lo, "cvm_styl", 8);
+ snprintf(buf, 16, "e_%d.....", node);
+ memcpy(&tag.hi, buf, 8);
+ res_mgr_free(tag, i);
+ }
+ for (i = 0; i < PKI_NUM_QPG_ENTRY; i++) {
+ strncpy((char *)&tag.lo, "cvm_qpge", 8);
+ snprintf(buf, 16, "t_%d.....", node);
+ memcpy(&tag.hi, buf, 8);
+ res_mgr_free(tag, i);
+ }
+ for (i = 0; i < get_num_clusters(); i++) {
+ for (j = 0; j < MAX_BANKS; j++) {
+ strncpy((char *)&tag.lo, "cvm_pcam", 8);
+ snprintf(buf, 16, "_%d%d%d....", node, i, j);
+ memcpy(&tag.hi, buf, 8);
+ for (k = 0; k < MAX_BANK_ENTRIES; k++)
+ res_mgr_free(tag, k);
+ }
+ }
+
+ /* Restore the registers back to their reset state. We should
+ * only reset the registers used by us (TODO).
+ */
+ for (i = 0; i < get_num_clusters(); i++) {
+ for (j = 0; j < MAX_PKNDS; j++) {
+ oct_csr_write(0, PKI_CL_PKIND_CFG(node, i, j));
+ oct_csr_write(0, PKI_CL_PKIND_STYLE(node, i, j));
+ oct_csr_write(0, PKI_CL_PKIND_SKIP(node, i, j));
+ oct_csr_write(0, PKI_CL_PKIND_L2_CUSTOM(node, i, j));
+ oct_csr_write(0, PKI_CL_PKIND_LG_CUSTOM(node, i, j));
+ }
+
+ for (j = 0; j < PKI_NUM_FINAL_STYLE; j++) {
+ oct_csr_write(0, PKI_CL_STYLE_CFG(node, i, j));
+ oct_csr_write(0, PKI_CL_STYLE_CFG2(node, i, j));
+ oct_csr_write(0, PKI_CLX_STYLEX_ALG(node, i, j));
+ }
+ }
+ for (i = 0; i < PKI_NUM_FINAL_STYLE; i++)
+ oct_csr_write((0x5 << 22) | 0x20, PKI_STYLE_BUF(node, i));
+}
+EXPORT_SYMBOL(octeon3_pki_shutdown);
+
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(PKI_CLUSTER_FIRMWARE);
+MODULE_AUTHOR("Carlos Munoz <cmunoz@cavium.com>");
+MODULE_DESCRIPTION("Cavium, Inc. PKI management.");
diff --git a/drivers/net/ethernet/cavium/octeon/octeon3-pko.c b/drivers/net/ethernet/cavium/octeon/octeon3-pko.c
new file mode 100644
index 000000000000..27206a26929b
--- /dev/null
+++ b/drivers/net/ethernet/cavium/octeon/octeon3-pko.c
@@ -0,0 +1,1688 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2017 Cavium, Inc.
+ *
+ * Configuration and management of the PacKet Output (PKO) block.
+ */
+#include <linux/module.h>
+
+#include <asm/octeon/octeon.h>
+
+#include "octeon3.h"
+
+#define MAX_OUTPUT_MAC 28
+#define MAX_FIFO_GRP 8
+
+#define FIFO_SIZE 2560
+
+/* Registers are accessed via xkphys */
+#define PKO_BASE 0x1540000000000ull
+#define PKO_ADDR(node) (SET_XKPHYS + NODE_OFFSET(node) + \
+ PKO_BASE)
+
+#define PKO_L1_SQ_SHAPE(n, q) (PKO_ADDR(n) + ((q) << 9) + 0x000010)
+#define PKO_L1_SQ_LINK(n, q) (PKO_ADDR(n) + ((q) << 9) + 0x000038)
+#define PKO_DQ_WM_CTL(n, q) (PKO_ADDR(n) + ((q) << 9) + 0x000040)
+#define PKO_L1_SQ_TOPOLOGY(n, q) (PKO_ADDR(n) + ((q) << 9) + 0x080000)
+#define PKO_L2_SQ_SCHEDULE(n, q) (PKO_ADDR(n) + ((q) << 9) + 0x080008)
+#define PKO_L3_L2_SQ_CHANNEL(n, q) (PKO_ADDR(n) + ((q) << 9) + 0x080038)
+#define PKO_CHANNEL_LEVEL(n) (PKO_ADDR(n) + 0x0800f0)
+#define PKO_SHAPER_CFG(n) (PKO_ADDR(n) + 0x0800f8)
+#define PKO_L2_SQ_TOPOLOGY(n, q) (PKO_ADDR(n) + ((q) << 9) + 0x100000)
+#define PKO_L3_SQ_SCHEDULE(n, q) (PKO_ADDR(n) + ((q) << 9) + 0x100008)
+#define PKO_L3_SQ_TOPOLOGY(n, q) (PKO_ADDR(n) + ((q) << 9) + 0x180000)
+#define PKO_L4_SQ_SCHEDULE(n, q) (PKO_ADDR(n) + ((q) << 9) + 0x180008)
+#define PKO_L4_SQ_TOPOLOGY(n, q) (PKO_ADDR(n) + ((q) << 9) + 0x200000)
+#define PKO_L5_SQ_SCHEDULE(n, q) (PKO_ADDR(n) + ((q) << 9) + 0x200008)
+#define PKO_L5_SQ_TOPOLOGY(n, q) (PKO_ADDR(n) + ((q) << 9) + 0x280000)
+#define PKO_DQ_SCHEDULE(n, q) (PKO_ADDR(n) + ((q) << 9) + 0x280008)
+#define PKO_DQ_SW_XOFF(n, q) (PKO_ADDR(n) + ((q) << 9) + 0x2800e0)
+#define PKO_DQ_TOPOLOGY(n, q) (PKO_ADDR(n) + ((q) << 9) + 0x300000)
+#define PKO_PDM_CFG(n) (PKO_ADDR(n) + 0x800000)
+#define PKO_PDM_DQ_MINPAD(n, q) (PKO_ADDR(n) + ((q) << 3) + 0x8f0000)
+#define PKO_MAC_CFG(n, m) (PKO_ADDR(n) + ((m) << 3) + 0x900000)
+#define PKO_PTF_STATUS(n, f) (PKO_ADDR(n) + ((f) << 3) + 0x900100)
+#define PKO_PTGF_CFG(n, g) (PKO_ADDR(n) + ((g) << 3) + 0x900200)
+#define PKO_PTF_IOBP_CFG(n) (PKO_ADDR(n) + 0x900300)
+#define PKO_MCI0_MAX_CRED(n, m) (PKO_ADDR(n) + ((m) << 3) + 0xa00000)
+#define PKO_MCI1_MAX_CRED(n, m) (PKO_ADDR(n) + ((m) << 3) + 0xa80000)
+#define PKO_LUT(n, c) (PKO_ADDR(n) + ((c) << 3) + 0xb00000)
+#define PKO_DPFI_STATUS(n) (PKO_ADDR(n) + 0xc00000)
+#define PKO_DPFI_FLUSH(n) (PKO_ADDR(n) + 0xc00008)
+#define PKO_DPFI_FPA_AURA(n) (PKO_ADDR(n) + 0xc00010)
+#define PKO_DPFI_ENA(n) (PKO_ADDR(n) + 0xc00018)
+#define PKO_STATUS(n) (PKO_ADDR(n) + 0xd00000)
+#define PKO_ENABLE(n) (PKO_ADDR(n) + 0xd00008)
+
+/* These levels mimic the pko internal linked queue structure */
+enum queue_level {
+ PQ = 1,
+ L2_SQ = 2,
+ L3_SQ = 3,
+ L4_SQ = 4,
+ L5_SQ = 5,
+ DQ = 6
+};
+
+enum pko_dqop_e {
+ DQOP_SEND,
+ DQOP_OPEN,
+ DQOP_CLOSE,
+ DQOP_QUERY
+};
+
+enum pko_dqstatus_e {
+ PASS = 0,
+ BADSTATE = 0x8,
+ NOFPABUF = 0x9,
+ NOPKOBUF = 0xa,
+ FAILRTNPTR = 0xb,
+ ALREADY = 0xc,
+ NOTCREATED = 0xd,
+ NOTEMPTY = 0xe,
+ SENDPKTDROP = 0xf
+};
+
+struct mac_info {
+ int fifo_cnt;
+ int prio;
+ int speed;
+ int fifo;
+ int num_lmacs;
+};
+
+struct fifo_grp_info {
+ int speed;
+ int size;
+};
+
+static const int lut_index_78xx[] = {
+ 0x200,
+ 0x240,
+ 0x280,
+ 0x2c0,
+ 0x300,
+ 0x340
+};
+
+static const int lut_index_73xx[] = {
+ 0x000,
+ 0x040,
+ 0x080
+};
+
+static enum queue_level max_sq_level(void)
+{
+ /* 73xx and 75xx only have 3 scheduler queue levels */
+ if (OCTEON_IS_MODEL(OCTEON_CN73XX) || OCTEON_IS_MODEL(OCTEON_CNF75XX))
+ return L3_SQ;
+
+ return L5_SQ;
+}
+
+static int get_num_fifos(void)
+{
+ if (OCTEON_IS_MODEL(OCTEON_CN73XX) || OCTEON_IS_MODEL(OCTEON_CNF75XX))
+ return 16;
+
+ return 28;
+}
+
+static int get_num_fifo_groups(void)
+{
+ if (OCTEON_IS_MODEL(OCTEON_CN73XX) || OCTEON_IS_MODEL(OCTEON_CNF75XX))
+ return 5;
+
+ return 8;
+}
+
+static int get_num_output_macs(void)
+{
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+ return 28;
+ else if (OCTEON_IS_MODEL(OCTEON_CNF75XX))
+ return 10;
+ else if (OCTEON_IS_MODEL(OCTEON_CN73XX))
+ return 14;
+
+ return 0;
+}
+
+static int get_output_mac(int interface, int index,
+ enum octeon3_mac_type mac_type)
+{
+ int mac;
+
+ /* Output macs are hardcoded in the hardware. See PKO Output MACs
+ * section in the HRM.
+ */
+ if (OCTEON_IS_MODEL(OCTEON_CN73XX) || OCTEON_IS_MODEL(OCTEON_CNF75XX)) {
+ if (mac_type == SRIO_MAC)
+ mac = 4 + 2 * interface + index;
+ else
+ mac = 2 + 4 * interface + index;
+ } else {
+ mac = 4 + 4 * interface + index;
+ }
+
+ return mac;
+}
+
+static int get_num_port_queues(void)
+{
+ if (OCTEON_IS_MODEL(OCTEON_CN73XX) || OCTEON_IS_MODEL(OCTEON_CNF75XX))
+ return 16;
+
+ return 32;
+}
+
+static int allocate_queues(int node, enum queue_level level,
+ int num_queues, int *queues)
+{
+ struct global_resource_tag tag;
+ int max_queues = 0;
+ char buf[16];
+ int rc;
+
+ if (level == PQ) {
+ strncpy((char *)&tag.lo, "cvm_pkop", 8);
+ snprintf(buf, 16, "oq_%d....", node);
+ memcpy(&tag.hi, buf, 8);
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+ max_queues = 32;
+ else
+ max_queues = 16;
+ } else if (level == L2_SQ) {
+ strncpy((char *)&tag.lo, "cvm_pkol", 8);
+ snprintf(buf, 16, "2q_%d....", node);
+ memcpy(&tag.hi, buf, 8);
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+ max_queues = 512;
+ else
+ max_queues = 256;
+ } else if (level == L3_SQ) {
+ strncpy((char *)&tag.lo, "cvm_pkol", 8);
+ snprintf(buf, 16, "3q_%d....", node);
+ memcpy(&tag.hi, buf, 8);
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+ max_queues = 512;
+ else
+ max_queues = 256;
+ } else if (level == L4_SQ) {
+ strncpy((char *)&tag.lo, "cvm_pkol", 8);
+ snprintf(buf, 16, "4q_%d....", node);
+ memcpy(&tag.hi, buf, 8);
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+ max_queues = 1024;
+ else
+ max_queues = 0;
+ } else if (level == L5_SQ) {
+ strncpy((char *)&tag.lo, "cvm_pkol", 8);
+ snprintf(buf, 16, "5q_%d....", node);
+ memcpy(&tag.hi, buf, 8);
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+ max_queues = 1024;
+ else
+ max_queues = 0;
+ } else if (level == DQ) {
+ strncpy((char *)&tag.lo, "cvm_pkod", 8);
+ snprintf(buf, 16, "eq_%d....", node);
+ memcpy(&tag.hi, buf, 8);
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+ max_queues = 1024;
+ else
+ max_queues = 256;
+ }
+
+ res_mgr_create_resource(tag, max_queues);
+ rc = res_mgr_alloc_range(tag, -1, num_queues, false, queues);
+ if (rc < 0)
+ return rc;
+
+ return 0;
+}
+
+static void free_queues(int node, enum queue_level level,
+ int num_queues, const int *queues)
+{
+ struct global_resource_tag tag;
+ char buf[16];
+
+ if (level == PQ) {
+ strncpy((char *)&tag.lo, "cvm_pkop", 8);
+ snprintf(buf, 16, "oq_%d....", node);
+ memcpy(&tag.hi, buf, 8);
+ } else if (level == L2_SQ) {
+ strncpy((char *)&tag.lo, "cvm_pkol", 8);
+ snprintf(buf, 16, "2q_%d....", node);
+ memcpy(&tag.hi, buf, 8);
+ } else if (level == L3_SQ) {
+ strncpy((char *)&tag.lo, "cvm_pkol", 8);
+ snprintf(buf, 16, "3q_%d....", node);
+ memcpy(&tag.hi, buf, 8);
+ } else if (level == L4_SQ) {
+ strncpy((char *)&tag.lo, "cvm_pkol", 8);
+ snprintf(buf, 16, "4q_%d....", node);
+ memcpy(&tag.hi, buf, 8);
+ } else if (level == L5_SQ) {
+ strncpy((char *)&tag.lo, "cvm_pkol", 8);
+ snprintf(buf, 16, "5q_%d....", node);
+ memcpy(&tag.hi, buf, 8);
+ } else if (level == DQ) {
+ strncpy((char *)&tag.lo, "cvm_pkod", 8);
+ snprintf(buf, 16, "eq_%d....", node);
+ memcpy(&tag.hi, buf, 8);
+ }
+
+ res_mgr_free_range(tag, queues, num_queues);
+}
+
+static int port_queue_init(int node, int pq, int mac)
+{
+ u64 data;
+
+ data = mac << 16;
+ oct_csr_write(data, PKO_L1_SQ_TOPOLOGY(node, pq));
+
+ data = mac << 13;
+ oct_csr_write(data, PKO_L1_SQ_SHAPE(node, pq));
+
+ data = mac;
+ data <<= 44;
+ oct_csr_write(data, PKO_L1_SQ_LINK(node, pq));
+
+ return 0;
+}
+
+static int scheduler_queue_l2_init(int node, int queue, int parent_q)
+{
+ u64 data;
+
+ data = oct_csr_read(PKO_L1_SQ_TOPOLOGY(node, parent_q));
+ data &= ~(GENMASK_ULL(40, 32) | GENMASK_ULL(4, 1));
+ data |= (u64)queue << 32;
+ data |= 0xf << 1;
+ oct_csr_write(data, PKO_L1_SQ_TOPOLOGY(node, parent_q));
+
+ oct_csr_write(0, PKO_L2_SQ_SCHEDULE(node, queue));
+
+ data = parent_q << 16;
+ oct_csr_write(data, PKO_L2_SQ_TOPOLOGY(node, queue));
+
+ return 0;
+}
+
+static int scheduler_queue_l3_init(int node, int queue, int parent_q)
+{
+ u64 data;
+
+ data = oct_csr_read(PKO_L2_SQ_TOPOLOGY(node, parent_q));
+ data &= ~(GENMASK_ULL(40, 32) | GENMASK_ULL(4, 1));
+ data |= (u64)queue << 32;
+ data |= 0xf << 1;
+ oct_csr_write(data, PKO_L2_SQ_TOPOLOGY(node, parent_q));
+
+ oct_csr_write(0, PKO_L3_SQ_SCHEDULE(node, queue));
+
+ data = parent_q << 16;
+ oct_csr_write(data, PKO_L3_SQ_TOPOLOGY(node, queue));
+
+ return 0;
+}
+
+static int scheduler_queue_l4_init(int node, int queue, int parent_q)
+{
+ u64 data;
+
+ data = oct_csr_read(PKO_L3_SQ_TOPOLOGY(node, parent_q));
+ data &= ~(GENMASK_ULL(41, 32) | GENMASK_ULL(4, 1));
+ data |= (u64)queue << 32;
+ data |= 0xf << 1;
+ oct_csr_write(data, PKO_L3_SQ_TOPOLOGY(node, parent_q));
+
+ oct_csr_write(0, PKO_L4_SQ_SCHEDULE(node, queue));
+
+ data = parent_q << 16;
+ oct_csr_write(data, PKO_L4_SQ_TOPOLOGY(node, queue));
+
+ return 0;
+}
+
+static int scheduler_queue_l5_init(int node, int queue, int parent_q)
+{
+ u64 data;
+
+ data = oct_csr_read(PKO_L4_SQ_TOPOLOGY(node, parent_q));
+ data &= ~(GENMASK_ULL(41, 32) | GENMASK_ULL(4, 1));
+ data |= (u64)queue << 32;
+ data |= 0xf << 1;
+ oct_csr_write(data, PKO_L4_SQ_TOPOLOGY(node, parent_q));
+
+ oct_csr_write(0, PKO_L5_SQ_SCHEDULE(node, queue));
+
+ data = parent_q << 16;
+ oct_csr_write(data, PKO_L5_SQ_TOPOLOGY(node, queue));
+
+ return 0;
+}
+
+static int descriptor_queue_init(int node, const int *queue, int parent_q,
+ int num_dq)
+{
+ int rr_quantum;
+ int rr_prio;
+ u64 addr;
+ u64 data;
+ int prio;
+ int i;
+
+ /* Limit static priorities to the available prio field bits */
+ if (num_dq > 9) {
+ pr_err("octeon3-pko: Invalid number of dqs\n");
+ return -1;
+ }
+
+ prio = 0;
+
+ if (num_dq == 1) {
+ /* Single dq */
+ rr_prio = 0xf;
+ rr_quantum = 0x10;
+ } else {
+ /* Multiple dqs */
+ rr_prio = num_dq;
+ rr_quantum = 0;
+ }
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+ addr = PKO_L5_SQ_TOPOLOGY(node, parent_q);
+ else
+ addr = PKO_L3_SQ_TOPOLOGY(node, parent_q);
+
+ data = oct_csr_read(addr);
+ data &= ~(GENMASK_ULL(41, 32) | GENMASK_ULL(4, 1));
+ data |= (u64)queue[0] << 32;
+ data |= rr_prio << 1;
+ oct_csr_write(data, addr);
+
+ for (i = 0; i < num_dq; i++) {
+ data = (prio << 24) | rr_quantum;
+ oct_csr_write(data, PKO_DQ_SCHEDULE(node, queue[i]));
+
+ data = parent_q << 16;
+ oct_csr_write(data, PKO_DQ_TOPOLOGY(node, queue[i]));
+
+ data = BIT(49);
+ oct_csr_write(data, PKO_DQ_WM_CTL(node, queue[i]));
+
+ if (prio << rr_prio)
+ prio++;
+ }
+
+ return 0;
+}
+
+static int map_channel(int node, int pq, int queue, int ipd_port)
+{
+ int lut_index = 0;
+ int table_index;
+ u64 data;
+
+ data = oct_csr_read(PKO_L3_L2_SQ_CHANNEL(node, queue));
+ data &= ~GENMASK_ULL(43, 32);
+ data |= (u64)ipd_port << 32;
+ oct_csr_write(data, PKO_L3_L2_SQ_CHANNEL(node, queue));
+
+ /* See PKO_LUT register description in the HRM for how to compose the
+ * lut_index.
+ */
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX)) {
+ table_index = ((ipd_port & 0xf00) - 0x800) >> 8;
+ lut_index = lut_index_78xx[table_index];
+ lut_index += ipd_port & 0xff;
+ } else if (OCTEON_IS_MODEL(OCTEON_CN73XX)) {
+ table_index = ((ipd_port & 0xf00) - 0x800) >> 8;
+ lut_index = lut_index_73xx[table_index];
+ lut_index += ipd_port & 0xff;
+ } else if (OCTEON_IS_MODEL(OCTEON_CNF75XX)) {
+ if ((ipd_port & 0xf00) != 0x800)
+ return -1;
+ lut_index = ipd_port & 0xff;
+ }
+
+ data = BIT(15);
+ data |= pq << 9;
+ data |= queue;
+ oct_csr_write(data, PKO_LUT(node, lut_index));
+
+ return 0;
+}
+
+static int open_dq(int node, int dq)
+{
+ enum pko_dqstatus_e status;
+ u64 *scratch_addr;
+ u64 *iobdma_addr;
+ u64 data;
+
+ /* Build the dq open query. See PKO_QUERY_DMA_S in the HRM for the
+ * query format.
+ */
+ data = (LMTDMA_SCR_OFFSET >> 3) << 56;
+ data |= 1ull << 48;
+ data |= 0x51ull << 40;
+ data |= (u64)node << 36;
+ data |= (u64)DQOP_OPEN << 32;
+ data |= dq << 16;
+
+ CVMX_SYNCWS;
+ preempt_disable();
+
+ /* Clear return location */
+ scratch_addr = (u64 *)(SCRATCH_BASE + LMTDMA_SCR_OFFSET);
+ *scratch_addr = ~0ull;
+
+ /* Issue pko lmtdma command */
+ iobdma_addr = (u64 *)(IOBDMA_ORDERED_IO_ADDR);
+ *iobdma_addr = data;
+
+ /* Wait for lmtdma command to complete and get response*/
+ CVMX_SYNCIOBDMA;
+ data = *scratch_addr;
+
+ preempt_enable();
+
+ /* See PKO_QUERY_RTN_S in the HRM for response format */
+ status = (data & GENMASK_ULL(63, 60)) >> 60;
+ if (status != PASS && status != ALREADY) {
+ pr_err("octeon3-pko: Failed to open dq\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static s64 query_dq(int node, int dq)
+{
+ enum pko_dqstatus_e status;
+ u64 *scratch_addr;
+ u64 *iobdma_addr;
+ s64 depth;
+ u64 data;
+
+ /* Build the dq open query. See PKO_QUERY_DMA_S in the HRM for the
+ * query format.
+ */
+ data = (LMTDMA_SCR_OFFSET >> 3) << 56;
+ data |= 1ull << 48;
+ data |= 0x51ull << 40;
+ data |= (u64)node << 36;
+ data |= (u64)DQOP_QUERY << 32;
+ data |= dq << 16;
+
+ CVMX_SYNCWS;
+ preempt_disable();
+
+ /* Clear return location */
+ scratch_addr = (u64 *)(SCRATCH_BASE + LMTDMA_SCR_OFFSET);
+ *scratch_addr = ~0ull;
+
+ /* Issue pko lmtdma command */
+ iobdma_addr = (u64 *)(IOBDMA_ORDERED_IO_ADDR);
+ *iobdma_addr = data;
+
+ /* Wait for lmtdma command to complete and get response*/
+ CVMX_SYNCIOBDMA;
+ data = *scratch_addr;
+
+ preempt_enable();
+
+ /* See PKO_QUERY_RTN_S in the HRM for response format */
+ status = (data & GENMASK_ULL(63, 60)) >> 60;
+ if (status != PASS) {
+ pr_err("octeon3-pko: Failed to query dq=%d\n", dq);
+ return -1;
+ }
+
+ depth = data & GENMASK_ULL(47, 0);
+
+ return depth;
+}
+
+static u64 close_dq(int node, int dq)
+{
+ enum pko_dqstatus_e status;
+ u64 *scratch_addr;
+ u64 *iobdma_addr;
+ u64 data;
+
+ /* Build the dq open query. See PKO_QUERY_DMA_S in the HRM for the
+ * query format.
+ */
+ data = (LMTDMA_SCR_OFFSET >> 3) << 56;
+ data |= 1ull << 48;
+ data |= 0x51ull << 40;
+ data |= (u64)node << 36;
+ data |= (u64)DQOP_CLOSE << 32;
+ data |= dq << 16;
+
+ CVMX_SYNCWS;
+ preempt_disable();
+
+ /* Clear return location */
+ scratch_addr = (u64 *)(SCRATCH_BASE + LMTDMA_SCR_OFFSET);
+ *scratch_addr = ~0ull;
+
+ /* Issue pko lmtdma command */
+ iobdma_addr = (u64 *)(IOBDMA_ORDERED_IO_ADDR);
+ *iobdma_addr = data;
+
+ /* Wait for lmtdma command to complete and get response*/
+ CVMX_SYNCIOBDMA;
+ data = *scratch_addr;
+
+ preempt_enable();
+
+ /* See PKO_QUERY_RTN_S in the HRM for response format */
+ status = (data & GENMASK_ULL(63, 60)) >> 60;
+ if (status != PASS) {
+ pr_err("octeon3-pko: Failed to close dq\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int get_78xx_fifos_required(int node, struct mac_info *macs)
+{
+ enum port_mode mode;
+ int fifo_cnt = 0;
+ int num_lmacs;
+ int index;
+ u64 data;
+ int prio;
+ int bgx;
+ int cnt;
+ int qlm;
+ int i;
+
+ /* The loopback mac gets 1 fifo by default */
+ macs[0].fifo_cnt = 1;
+ macs[0].speed = 1;
+ fifo_cnt += 1;
+
+ /* The dpi mac gets 1 fifo by default */
+ macs[1].fifo_cnt = 1;
+ macs[1].speed = 50;
+ fifo_cnt += 1;
+
+ /* The ilk macs get default number of fifos (module param) */
+ macs[2].fifo_cnt = ilk0_lanes <= 4 ? ilk0_lanes : 4;
+ macs[2].speed = 40;
+ fifo_cnt += macs[2].fifo_cnt;
+ macs[3].fifo_cnt = ilk1_lanes <= 4 ? ilk1_lanes : 4;
+ macs[3].speed = 40;
+ fifo_cnt += macs[3].fifo_cnt;
+
+ /* Assign fifos to the active bgx macs */
+ for (i = 4; i < get_num_output_macs(); i += 4) {
+ bgx = (i - 4) / 4;
+ qlm = bgx_port_get_qlm(node, bgx, 0);
+
+ data = oct_csr_read(GSER_CFG(node, qlm));
+ if (data & BIT(2)) {
+ data = oct_csr_read(BGX_CMR_TX_LMACS(node, bgx));
+ num_lmacs = data & 7;
+
+ for (index = 0; index < num_lmacs; index++) {
+ switch (num_lmacs) {
+ case 1:
+ macs[i + index].num_lmacs = 4;
+ break;
+ case 2:
+ macs[i + index].num_lmacs = 2;
+ break;
+ case 4:
+ default:
+ macs[i + index].num_lmacs = 1;
+ break;
+ }
+
+ mode = bgx_port_get_mode(node, bgx, 0);
+ switch (mode) {
+ case PORT_MODE_SGMII:
+ case PORT_MODE_RGMII:
+ macs[i + index].fifo_cnt = 1;
+ macs[i + index].prio = 1;
+ macs[i + index].speed = 1;
+ break;
+
+ case PORT_MODE_XAUI:
+ case PORT_MODE_RXAUI:
+ macs[i + index].fifo_cnt = 4;
+ macs[i + index].prio = 2;
+ macs[i + index].speed = 20;
+ break;
+
+ case PORT_MODE_10G_KR:
+ case PORT_MODE_XFI:
+ macs[i + index].fifo_cnt = 4;
+ macs[i + index].prio = 2;
+ macs[i + index].speed = 10;
+ break;
+
+ case PORT_MODE_40G_KR4:
+ case PORT_MODE_XLAUI:
+ macs[i + index].fifo_cnt = 4;
+ macs[i + index].prio = 3;
+ macs[i + index].speed = 40;
+ break;
+
+ default:
+ macs[i + index].fifo_cnt = 0;
+ macs[i + index].prio = 0;
+ macs[i + index].speed = 0;
+ macs[i + index].num_lmacs = 0;
+ break;
+ }
+
+ fifo_cnt += macs[i + index].fifo_cnt;
+ }
+ }
+ }
+
+ /* If more fifos than available were assigned, reduce the number of
+ * fifos until within limit. Start with the lowest priority macs with 4
+ * fifos.
+ */
+ prio = 1;
+ cnt = 4;
+ while (fifo_cnt > get_num_fifos()) {
+ for (i = 0; i < get_num_output_macs(); i++) {
+ if (macs[i].prio == prio && macs[i].fifo_cnt == cnt) {
+ macs[i].fifo_cnt >>= 1;
+ fifo_cnt -= macs[i].fifo_cnt;
+ }
+
+ if (fifo_cnt <= get_num_fifos())
+ break;
+ }
+
+ if (prio >= 3) {
+ prio = 1;
+ cnt >>= 1;
+ } else {
+ prio++;
+ }
+
+ if (cnt == 0)
+ break;
+ }
+
+ /* Assign left over fifos to dpi */
+ if (get_num_fifos() - fifo_cnt > 0) {
+ if (get_num_fifos() - fifo_cnt >= 3) {
+ macs[1].fifo_cnt += 3;
+ fifo_cnt -= 3;
+ } else {
+ macs[1].fifo_cnt += 1;
+ fifo_cnt -= 1;
+ }
+ }
+
+ return 0;
+}
+
+static int get_75xx_fifos_required(int node, struct mac_info *macs)
+{
+ enum port_mode mode;
+ int fifo_cnt = 0;
+ int index;
+ u64 data;
+ int prio;
+ int bgx;
+ int cnt;
+ int qlm;
+ int i;
+
+ /* The loopback mac gets 1 fifo by default */
+ macs[0].fifo_cnt = 1;
+ macs[0].speed = 1;
+ fifo_cnt += 1;
+
+ /* The dpi mac gets 1 fifo by default */
+ macs[1].fifo_cnt = 1;
+ macs[1].speed = 50;
+ fifo_cnt += 1;
+
+ /* Assign fifos to the active bgx macs */
+ bgx = 0;
+ for (i = 2; i < 6; i++) {
+ index = i - 2;
+ qlm = bgx_port_get_qlm(node, bgx, index);
+ data = oct_csr_read(GSER_CFG(node, qlm));
+ if (data & BIT(2)) {
+ macs[i].num_lmacs = 1;
+
+ mode = bgx_port_get_mode(node, bgx, index);
+ switch (mode) {
+ case PORT_MODE_SGMII:
+ case PORT_MODE_RGMII:
+ macs[i].fifo_cnt = 1;
+ macs[i].prio = 1;
+ macs[i].speed = 1;
+ break;
+
+ case PORT_MODE_10G_KR:
+ case PORT_MODE_XFI:
+ macs[i].fifo_cnt = 4;
+ macs[i].prio = 2;
+ macs[i].speed = 10;
+ break;
+
+ default:
+ macs[i].fifo_cnt = 0;
+ macs[i].prio = 0;
+ macs[i].speed = 0;
+ macs[i].num_lmacs = 0;
+ break;
+ }
+
+ fifo_cnt += macs[i].fifo_cnt;
+ }
+ }
+
+ /* If more fifos than available were assigned, reduce the number of
+ * fifos until within limit. Start with the lowest priority macs with 4
+ * fifos.
+ */
+ prio = 1;
+ cnt = 4;
+ while (fifo_cnt > get_num_fifos()) {
+ for (i = 0; i < get_num_output_macs(); i++) {
+ if (macs[i].prio == prio && macs[i].fifo_cnt == cnt) {
+ macs[i].fifo_cnt >>= 1;
+ fifo_cnt -= macs[i].fifo_cnt;
+ }
+
+ if (fifo_cnt <= get_num_fifos())
+ break;
+ }
+
+ if (prio >= 3) {
+ prio = 1;
+ cnt >>= 1;
+ } else {
+ prio++;
+ }
+
+ if (cnt == 0)
+ break;
+ }
+
+ /* Assign left over fifos to dpi */
+ if (get_num_fifos() - fifo_cnt > 0) {
+ if (get_num_fifos() - fifo_cnt >= 3) {
+ macs[1].fifo_cnt += 3;
+ fifo_cnt -= 3;
+ } else {
+ macs[1].fifo_cnt += 1;
+ fifo_cnt -= 1;
+ }
+ }
+
+ return 0;
+}
+
+static int get_73xx_fifos_required(int node, struct mac_info *macs)
+{
+ enum port_mode mode;
+ int fifo_cnt = 0;
+ int num_lmacs;
+ int index;
+ u64 data;
+ int prio;
+ int bgx;
+ int cnt;
+ int qlm;
+ int i;
+
+ /* The loopback mac gets 1 fifo by default */
+ macs[0].fifo_cnt = 1;
+ macs[0].speed = 1;
+ fifo_cnt += 1;
+
+ /* The dpi mac gets 1 fifo by default */
+ macs[1].fifo_cnt = 1;
+ macs[1].speed = 50;
+ fifo_cnt += 1;
+
+ /* Assign fifos to the active bgx macs */
+ for (i = 2; i < get_num_output_macs(); i += 4) {
+ bgx = (i - 2) / 4;
+ qlm = bgx_port_get_qlm(node, bgx, 0);
+ data = oct_csr_read(GSER_CFG(node, qlm));
+
+ /* Bgx2 can be connected to dlm 5, 6, or both */
+ if (bgx == 2) {
+ if (!(data & BIT(2))) {
+ qlm = bgx_port_get_qlm(node, bgx, 2);
+ data = oct_csr_read(GSER_CFG(node, qlm));
+ }
+ }
+
+ if (data & BIT(2)) {
+ data = oct_csr_read(BGX_CMR_TX_LMACS(node, bgx));
+ num_lmacs = data & 7;
+
+ for (index = 0; index < num_lmacs; index++) {
+ switch (num_lmacs) {
+ case 1:
+ macs[i + index].num_lmacs = 4;
+ break;
+ case 2:
+ macs[i + index].num_lmacs = 2;
+ break;
+ case 4:
+ default:
+ macs[i + index].num_lmacs = 1;
+ break;
+ }
+
+ mode = bgx_port_get_mode(node, bgx, index);
+ switch (mode) {
+ case PORT_MODE_SGMII:
+ case PORT_MODE_RGMII:
+ macs[i + index].fifo_cnt = 1;
+ macs[i + index].prio = 1;
+ macs[i + index].speed = 1;
+ break;
+
+ case PORT_MODE_XAUI:
+ case PORT_MODE_RXAUI:
+ macs[i + index].fifo_cnt = 4;
+ macs[i + index].prio = 2;
+ macs[i + index].speed = 20;
+ break;
+
+ case PORT_MODE_10G_KR:
+ case PORT_MODE_XFI:
+ macs[i + index].fifo_cnt = 4;
+ macs[i + index].prio = 2;
+ macs[i + index].speed = 10;
+ break;
+
+ case PORT_MODE_40G_KR4:
+ case PORT_MODE_XLAUI:
+ macs[i + index].fifo_cnt = 4;
+ macs[i + index].prio = 3;
+ macs[i + index].speed = 40;
+ break;
+
+ default:
+ macs[i + index].fifo_cnt = 0;
+ macs[i + index].prio = 0;
+ macs[i + index].speed = 0;
+ break;
+ }
+
+ fifo_cnt += macs[i + index].fifo_cnt;
+ }
+ }
+ }
+
+ /* If more fifos than available were assigned, reduce the number of
+ * fifos until within limit. Start with the lowest priority macs with 4
+ * fifos.
+ */
+ prio = 1;
+ cnt = 4;
+ while (fifo_cnt > get_num_fifos()) {
+ for (i = 0; i < get_num_output_macs(); i++) {
+ if (macs[i].prio == prio && macs[i].fifo_cnt == cnt) {
+ macs[i].fifo_cnt >>= 1;
+ fifo_cnt -= macs[i].fifo_cnt;
+ }
+
+ if (fifo_cnt <= get_num_fifos())
+ break;
+ }
+
+ if (prio >= 3) {
+ prio = 1;
+ cnt >>= 1;
+ } else {
+ prio++;
+ }
+
+ if (cnt == 0)
+ break;
+ }
+
+ /* Assign left over fifos to dpi */
+ if (get_num_fifos() - fifo_cnt > 0) {
+ if (get_num_fifos() - fifo_cnt >= 3) {
+ macs[1].fifo_cnt += 3;
+ fifo_cnt -= 3;
+ } else {
+ macs[1].fifo_cnt += 1;
+ fifo_cnt -= 1;
+ }
+ }
+
+ return 0;
+}
+
+static int setup_macs(int node)
+{
+ struct fifo_grp_info fifo_grp[MAX_FIFO_GRP];
+ struct mac_info macs[MAX_OUTPUT_MAC];
+ u64 data;
+ int fifo;
+ int size;
+ int cnt;
+ int grp;
+ int i;
+
+ memset(macs, 0, sizeof(macs));
+ memset(fifo_grp, 0, sizeof(fifo_grp));
+
+ /* Get the number of fifos required by each mac */
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX)) {
+ get_78xx_fifos_required(node, macs);
+ } else if (OCTEON_IS_MODEL(OCTEON_CNF75XX)) {
+ get_75xx_fifos_required(node, macs);
+ } else if (OCTEON_IS_MODEL(OCTEON_CN73XX)) {
+ get_73xx_fifos_required(node, macs);
+ } else {
+ pr_err("octeon3-pko: Unsupported board type\n");
+ return -1;
+ }
+
+ /* Assign fifos to each mac. Start with macs requiring 4 fifos */
+ fifo = 0;
+ for (cnt = 4; cnt > 0; cnt >>= 1) {
+ for (i = 0; i < get_num_output_macs(); i++) {
+ if (macs[i].fifo_cnt != cnt)
+ continue;
+
+ macs[i].fifo = fifo;
+ grp = fifo / 4;
+
+ fifo_grp[grp].speed += macs[i].speed;
+
+ if (cnt == 4) {
+ /* 10, 0, 0, 0 */
+ fifo_grp[grp].size = 4;
+ } else if (cnt == 2) {
+ /* 5, 0, 5, 0 */
+ fifo_grp[grp].size = 3;
+ } else if (cnt == 1) {
+ if ((fifo & 0x2) && fifo_grp[grp].size == 3) {
+ /* 5, 0, 2.5, 2.5 */
+ fifo_grp[grp].size = 1;
+ } else {
+ /* 2.5, 2.5, 2.5, 2.5 */
+ fifo_grp[grp].size = 0;
+ }
+ }
+
+ fifo += cnt;
+ }
+ }
+
+ /* Configure the fifo groups */
+ for (i = 0; i < get_num_fifo_groups(); i++) {
+ data = oct_csr_read(PKO_PTGF_CFG(node, i));
+ size = data & GENMASK_ULL(2, 0);
+ if (size != fifo_grp[i].size)
+ data |= BIT(6);
+ data &= ~GENMASK_ULL(2, 0);
+ data |= fifo_grp[i].size;
+
+ data &= ~GENMASK_ULL(5, 3);
+ if (fifo_grp[i].speed >= 40) {
+ if (fifo_grp[i].size >= 3) {
+ /* 50 Gbps */
+ data |= 0x3 << 3;
+ } else {
+ /* 25 Gbps */
+ data |= 0x2 << 3;
+ }
+ } else if (fifo_grp[i].speed >= 20) {
+ /* 25 Gbps */
+ data |= 0x2 << 3;
+ } else if (fifo_grp[i].speed >= 10) {
+ /* 12.5 Gbps */
+ data |= 0x1 << 3;
+ }
+ oct_csr_write(data, PKO_PTGF_CFG(node, i));
+ data &= ~BIT(6);
+ oct_csr_write(data, PKO_PTGF_CFG(node, i));
+ }
+
+ /* Configure the macs with their assigned fifo */
+ for (i = 0; i < get_num_output_macs(); i++) {
+ data = oct_csr_read(PKO_MAC_CFG(node, i));
+ data &= ~GENMASK_ULL(4, 0);
+ if (!macs[i].fifo_cnt)
+ data |= 0x1f;
+ else
+ data |= macs[i].fifo;
+ oct_csr_write(data, PKO_MAC_CFG(node, i));
+ }
+
+ /* Setup mci0/mci1/skid credits */
+ for (i = 0; i < get_num_output_macs(); i++) {
+ int fifo_credit;
+ int skid_credit;
+ int mac_credit;
+
+ if (!macs[i].fifo_cnt)
+ continue;
+
+ if (i == 0) {
+ /* Loopback */
+ mac_credit = 4 * 1024;
+ skid_credit = 0;
+ } else if (i == 1) {
+ /* Dpi */
+ mac_credit = 2 * 1024;
+ skid_credit = 0;
+ } else if (OCTEON_IS_MODEL(OCTEON_CN78XX) && ((i == 2 || i == 3))) {
+ /* ILK */
+ mac_credit = 4 * 1024;
+ skid_credit = 0;
+ } else if (OCTEON_IS_MODEL(OCTEON_CNF75XX) && ((i >= 6 && i <= 9))) {
+ /* Srio */
+ mac_credit = 1024 / 2;
+ skid_credit = 0;
+ } else {
+ /* Bgx */
+ mac_credit = macs[i].num_lmacs * 8 * 1024;
+ skid_credit = macs[i].num_lmacs * 256;
+ }
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+ fifo_credit = macs[i].fifo_cnt * FIFO_SIZE;
+ data = (fifo_credit + mac_credit) / 16;
+ oct_csr_write(data, PKO_MCI0_MAX_CRED(node, i));
+ }
+
+ data = mac_credit / 16;
+ oct_csr_write(data, PKO_MCI1_MAX_CRED(node, i));
+
+ data = oct_csr_read(PKO_MAC_CFG(node, i));
+ data &= ~GENMASK_ULL(6, 5);
+ data |= ((skid_credit / 256) >> 1) << 5;
+ oct_csr_write(data, PKO_MAC_CFG(node, i));
+ }
+
+ return 0;
+}
+
+static int hw_init_global(int node, int aura)
+{
+ int timeout;
+ u64 data;
+
+ data = oct_csr_read(PKO_ENABLE(node));
+ if (data & BIT(0)) {
+ pr_info("octeon3-pko: Pko already enabled on node %d\n", node);
+ return 0;
+ }
+
+ /* Enable color awareness */
+ data = oct_csr_read(PKO_SHAPER_CFG(node));
+ data |= BIT(1);
+ oct_csr_write(data, PKO_SHAPER_CFG(node));
+
+ /* Clear flush command */
+ oct_csr_write(0, PKO_DPFI_FLUSH(node));
+
+ /* Set the aura number */
+ data = (node << 10) | aura;
+ oct_csr_write(data, PKO_DPFI_FPA_AURA(node));
+
+ data = BIT(0);
+ oct_csr_write(data, PKO_DPFI_ENA(node));
+
+ /* Wait until all pointers have been returned */
+ timeout = 100000;
+ do {
+ data = oct_csr_read(PKO_STATUS(node));
+ if (data & BIT(63))
+ break;
+ udelay(1);
+ timeout--;
+ } while (timeout);
+ if (!timeout) {
+ pr_err("octeon3-pko: Pko dfpi failed on node %d\n", node);
+ return -1;
+ }
+
+ /* Set max outstanding requests in IOBP for any FIFO.*/
+ data = oct_csr_read(PKO_PTF_IOBP_CFG(node));
+ data &= ~GENMASK_ULL(6, 0);
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+ data |= 0x10;
+ else
+ data |= 3;
+ oct_csr_write(data, PKO_PTF_IOBP_CFG(node));
+
+ /* Set minimum packet size per Ethernet standard */
+ data = 0x3c << 3;
+ oct_csr_write(data, PKO_PDM_CFG(node));
+
+ /* Initialize macs and fifos */
+ setup_macs(node);
+
+ /* Enable pko */
+ data = BIT(0);
+ oct_csr_write(data, PKO_ENABLE(node));
+
+ /* Verify pko is ready */
+ data = oct_csr_read(PKO_STATUS(node));
+ if (!(data & BIT(63))) {
+ pr_err("octeon3_pko: pko is not ready\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int hw_exit_global(int node)
+{
+ int timeout;
+ u64 data;
+ int i;
+
+ /* Wait until there are no in-flight packets */
+ for (i = 0; i < get_num_fifos(); i++) {
+ data = oct_csr_read(PKO_PTF_STATUS(node, i));
+ if ((data & GENMASK_ULL(4, 0)) == 0x1f)
+ continue;
+
+ timeout = 10000;
+ do {
+ if (!(data & GENMASK_ULL(11, 5)))
+ break;
+ udelay(1);
+ timeout--;
+ data = oct_csr_read(PKO_PTF_STATUS(node, i));
+ } while (timeout);
+ if (!timeout) {
+ pr_err("octeon3-pko: Timeout in-flight fifo\n");
+ return -1;
+ }
+ }
+
+ /* Disable pko */
+ oct_csr_write(0, PKO_ENABLE(node));
+
+ /* Reset all port queues to the virtual mac */
+ for (i = 0; i < get_num_port_queues(); i++) {
+ data = get_num_output_macs() << 16;
+ oct_csr_write(data, PKO_L1_SQ_TOPOLOGY(node, i));
+
+ data = get_num_output_macs() << 13;
+ oct_csr_write(data, PKO_L1_SQ_SHAPE(node, i));
+
+ data = (u64)get_num_output_macs() << 48;
+ oct_csr_write(data, PKO_L1_SQ_LINK(node, i));
+ }
+
+ /* Reset all output macs */
+ for (i = 0; i < get_num_output_macs(); i++) {
+ data = 0x1f;
+ oct_csr_write(data, PKO_MAC_CFG(node, i));
+ }
+
+ /* Reset all fifo groups */
+ for (i = 0; i < get_num_fifo_groups(); i++) {
+ data = oct_csr_read(PKO_PTGF_CFG(node, i));
+ /* Simulator asserts if an unused group is reset */
+ if (data == 0)
+ continue;
+ data = BIT(6);
+ oct_csr_write(data, PKO_PTGF_CFG(node, i));
+ }
+
+ /* Return cache pointers to fpa */
+ data = BIT(0);
+ oct_csr_write(data, PKO_DPFI_FLUSH(node));
+ timeout = 10000;
+ do {
+ data = oct_csr_read(PKO_DPFI_STATUS(node));
+ if (data & BIT(0))
+ break;
+ udelay(1);
+ timeout--;
+ } while (timeout);
+ if (!timeout) {
+ pr_err("octeon3-pko: Timeout flushing cache\n");
+ return -1;
+ }
+ oct_csr_write(0, PKO_DPFI_ENA(node));
+ oct_csr_write(0, PKO_DPFI_FLUSH(node));
+
+ return 0;
+}
+
+static int virtual_mac_config(int node)
+{
+ enum queue_level level;
+ int parent_q;
+ int num_dq;
+ int dq[8];
+ int queue;
+ int vmac;
+ int pq;
+ int i;
+ int rc;
+
+ /* The virtual mac is after the last output mac. Note: for the 73xx it
+ * might be 2 after the last output mac (15).
+ */
+ vmac = get_num_output_macs();
+
+ /* Allocate a port queue */
+ rc = allocate_queues(node, PQ, 1, &pq);
+ if (rc < 0) {
+ pr_err("octeon3-pko: Failed to allocate port queue\n");
+ return rc;
+ }
+
+ /* Connect the port queue to the output mac */
+ port_queue_init(node, pq, vmac);
+
+ parent_q = pq;
+ for (level = L2_SQ; level <= max_sq_level(); level++) {
+ rc = allocate_queues(node, level, 1, &queue);
+ if (rc < 0) {
+ pr_err("octeon3-pko: Failed to allocate queue\n");
+ return rc;
+ }
+
+ switch (level) {
+ case L2_SQ:
+ scheduler_queue_l2_init(node, queue, parent_q);
+ break;
+ case L3_SQ:
+ scheduler_queue_l3_init(node, queue, parent_q);
+ break;
+ case L4_SQ:
+ scheduler_queue_l4_init(node, queue, parent_q);
+ break;
+ case L5_SQ:
+ scheduler_queue_l5_init(node, queue, parent_q);
+ break;
+ default:
+ break;
+ }
+
+ parent_q = queue;
+ }
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_0))
+ num_dq = 8;
+ else
+ num_dq = 1;
+
+ rc = allocate_queues(node, DQ, num_dq, dq);
+ if (rc < 0) {
+ pr_err("octeon3-pko: Failed to allocate description queues\n");
+ return rc;
+ }
+
+ /* By convention the dq must be zero */
+ if (dq[0] != 0) {
+ pr_err("octeon3-pko: Failed to reserve description queues\n");
+ return -1;
+ }
+ descriptor_queue_init(node, dq, parent_q, num_dq);
+
+ /* Open the dqs */
+ for (i = 0; i < num_dq; i++)
+ open_dq(node, dq[i]);
+
+ return 0;
+}
+
+static int drain_dq(int node, int dq)
+{
+ int timeout;
+ u64 data;
+ s64 rc;
+
+ data = BIT(2) | BIT(1);
+ oct_csr_write(data, PKO_DQ_SW_XOFF(node, dq));
+
+ usleep_range(1000, 2000);
+
+ data = 0;
+ oct_csr_write(data, PKO_DQ_SW_XOFF(node, dq));
+
+ /* Wait for the dq to drain */
+ timeout = 10000;
+ do {
+ rc = query_dq(node, dq);
+ if (!rc)
+ break;
+ else if (rc < 0)
+ return rc;
+ udelay(1);
+ timeout--;
+ } while (timeout);
+ if (!timeout) {
+ pr_err("octeon3-pko: Timeout waiting for dq to drain\n");
+ return -1;
+ }
+
+ /* Close the queue anf free internal buffers */
+ close_dq(node, dq);
+
+ return 0;
+}
+
+int octeon3_pko_exit_global(int node)
+{
+ int num_dq;
+ int dq[8];
+ int i;
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_0))
+ num_dq = 8;
+ else
+ num_dq = 1;
+
+ /* Shutdown the virtual/null interface */
+ for (i = 0; i < ARRAY_SIZE(dq); i++)
+ dq[i] = i;
+ octeon3_pko_interface_uninit(node, dq, num_dq);
+
+ /* Shutdown pko */
+ hw_exit_global(node);
+
+ return 0;
+}
+EXPORT_SYMBOL(octeon3_pko_exit_global);
+
+int octeon3_pko_init_global(int node, int aura)
+{
+ int rc;
+
+ rc = hw_init_global(node, aura);
+ if (rc)
+ return rc;
+
+ /* Channel credit level at level 2 */
+ oct_csr_write(0, PKO_CHANNEL_LEVEL(node));
+
+ /* Configure the null mac */
+ rc = virtual_mac_config(node);
+ if (rc)
+ return rc;
+
+ return 0;
+}
+EXPORT_SYMBOL(octeon3_pko_init_global);
+
+int octeon3_pko_set_mac_options(int node, int interface, int index,
+ enum octeon3_mac_type mac_type,
+ bool fcs_en, bool pad_en, int fcs_sop_off)
+{
+ int fifo_num;
+ u64 data;
+ int mac;
+
+ mac = get_output_mac(interface, index, mac_type);
+
+ data = oct_csr_read(PKO_MAC_CFG(node, mac));
+ fifo_num = data & GENMASK_ULL(4, 0);
+ if (fifo_num == 0x1f) {
+ pr_err("octeon3_pko: mac not configured %d:%d:%d\n",
+ node, interface, index);
+ return -ENODEV;
+ }
+
+ /* Some silicon requires fifo_num=0x1f to change padding, fcs */
+ data &= ~GENMASK_ULL(4, 0);
+ data |= 0x1f;
+
+ data &= ~(BIT(16) | BIT(15) | GENMASK_ULL(14, 7));
+ if (pad_en)
+ data |= BIT(16);
+ if (fcs_en)
+ data |= BIT(15);
+ if (fcs_sop_off)
+ data |= fcs_sop_off << 7;
+
+ oct_csr_write(data, PKO_MAC_CFG(node, mac));
+
+ data &= ~GENMASK_ULL(4, 0);
+ data |= fifo_num;
+ oct_csr_write(data, PKO_MAC_CFG(node, mac));
+
+ return 0;
+}
+EXPORT_SYMBOL(octeon3_pko_set_mac_options);
+
+int octeon3_pko_get_fifo_size(int node, int interface, int index,
+ enum octeon3_mac_type mac_type)
+{
+ int fifo_grp;
+ int fifo_off;
+ u64 data;
+ int size;
+ int mac;
+
+ /* Set fifo size to 2.4 KB */
+ size = FIFO_SIZE;
+
+ mac = get_output_mac(interface, index, mac_type);
+
+ data = oct_csr_read(PKO_MAC_CFG(node, mac));
+ if ((data & GENMASK_ULL(4, 0)) == 0x1f) {
+ pr_err("octeon3_pko: mac not configured %d:%d:%d\n",
+ node, interface, index);
+ return -ENODEV;
+ }
+ fifo_grp = (data & GENMASK_ULL(4, 0)) >> 2;
+ fifo_off = data & GENMASK_ULL(1, 0);
+
+ data = oct_csr_read(PKO_PTGF_CFG(node, fifo_grp));
+ data &= GENMASK_ULL(2, 0);
+ switch (data) {
+ case 0:
+ /* 2.5l, 2.5k, 2.5k, 2.5k */
+ break;
+ case 1:
+ /* 5.0k, 0.0k, 2.5k, 2.5k */
+ if (fifo_off == 0)
+ size *= 2;
+ if (fifo_off == 1)
+ size = 0;
+ break;
+ case 2:
+ /* 2.5k, 2.5k, 5.0k, 0.0k */
+ if (fifo_off == 2)
+ size *= 2;
+ if (fifo_off == 3)
+ size = 0;
+ break;
+ case 3:
+ /* 5k, 0, 5k, 0 */
+ if ((fifo_off & 1) != 0)
+ size = 0;
+ size *= 2;
+ break;
+ case 4:
+ /* 10k, 0, 0, 0 */
+ if (fifo_off != 0)
+ size = 0;
+ size *= 4;
+ break;
+ default:
+ size = -1;
+ }
+
+ return size;
+}
+EXPORT_SYMBOL(octeon3_pko_get_fifo_size);
+
+int octeon3_pko_activate_dq(int node, int dq, int cnt)
+{
+ int rc = 0;
+ u64 data;
+ int i;
+
+ for (i = 0; i < cnt; i++) {
+ rc = open_dq(node, dq + i);
+ if (rc)
+ break;
+
+ data = oct_csr_read(PKO_PDM_DQ_MINPAD(node, dq + i));
+ data &= ~BIT(0);
+ oct_csr_write(data, PKO_PDM_DQ_MINPAD(node, dq + i));
+ }
+
+ return rc;
+}
+EXPORT_SYMBOL(octeon3_pko_activate_dq);
+
+int octeon3_pko_interface_init(int node, int interface, int index,
+ enum octeon3_mac_type mac_type, int ipd_port)
+{
+ enum queue_level level;
+ int parent_q;
+ int queue;
+ int mac;
+ int pq;
+ int rc;
+
+ mac = get_output_mac(interface, index, mac_type);
+
+ /* Allocate a port queue for this interface */
+ rc = allocate_queues(node, PQ, 1, &pq);
+ if (rc < 0) {
+ pr_err("octeon3-pko: Failed to allocate port queue\n");
+ return rc;
+ }
+
+ /* Connect the port queue to the output mac */
+ port_queue_init(node, pq, mac);
+
+ /* Link scheduler queues to the port queue */
+ parent_q = pq;
+ for (level = L2_SQ; level <= max_sq_level(); level++) {
+ rc = allocate_queues(node, level, 1, &queue);
+ if (rc < 0) {
+ pr_err("octeon3-pko: Failed to allocate queue\n");
+ return rc;
+ }
+
+ switch (level) {
+ case L2_SQ:
+ scheduler_queue_l2_init(node, queue, parent_q);
+ map_channel(node, pq, queue, ipd_port);
+ break;
+ case L3_SQ:
+ scheduler_queue_l3_init(node, queue, parent_q);
+ break;
+ case L4_SQ:
+ scheduler_queue_l4_init(node, queue, parent_q);
+ break;
+ case L5_SQ:
+ scheduler_queue_l5_init(node, queue, parent_q);
+ break;
+ default:
+ break;
+ }
+
+ parent_q = queue;
+ }
+
+ /* Link the descriptor queue */
+ rc = allocate_queues(node, DQ, 1, &queue);
+ if (rc < 0) {
+ pr_err("octeon3-pko: Failed to allocate descriptor queue\n");
+ return rc;
+ }
+ descriptor_queue_init(node, &queue, parent_q, 1);
+
+ return queue;
+}
+EXPORT_SYMBOL(octeon3_pko_interface_init);
+
+int octeon3_pko_interface_uninit(int node, const int *dq, int num_dq)
+{
+ enum queue_level level;
+ int parent_q;
+ int queue;
+ u64 addr;
+ u64 data;
+ int rc;
+ int i;
+
+ /* Drain all dqs */
+ for (i = 0; i < num_dq; i++) {
+ rc = drain_dq(node, dq[i]);
+ if (rc)
+ return rc;
+
+ /* Free the dq */
+ data = oct_csr_read(PKO_DQ_TOPOLOGY(node, dq[i]));
+ parent_q = (data & GENMASK_ULL(25, 16)) >> 16;
+ free_queues(node, DQ, 1, &dq[i]);
+
+ /* Free all the scheduler queues */
+ queue = parent_q;
+ for (level = max_sq_level(); (signed int)level >= PQ; level--) {
+ switch (level) {
+ case L5_SQ:
+ addr = PKO_L5_SQ_TOPOLOGY(node, queue);
+ data = oct_csr_read(addr);
+ parent_q = (data & GENMASK_ULL(25, 16)) >> 16;
+ break;
+
+ case L4_SQ:
+ addr = PKO_L4_SQ_TOPOLOGY(node, queue);
+ data = oct_csr_read(addr);
+ parent_q = (data & GENMASK_ULL(24, 16)) >> 16;
+ break;
+
+ case L3_SQ:
+ addr = PKO_L3_SQ_TOPOLOGY(node, queue);
+ data = oct_csr_read(addr);
+ parent_q = (data & GENMASK_ULL(24, 16)) >> 16;
+ break;
+
+ case L2_SQ:
+ addr = PKO_L2_SQ_TOPOLOGY(node, queue);
+ data = oct_csr_read(addr);
+ parent_q = (data & GENMASK_ULL(20, 16)) >> 16;
+ break;
+
+ case PQ:
+ break;
+
+ default:
+ pr_err("octeon3-pko: Invalid level=%d\n",
+ level);
+ return -1;
+ }
+
+ free_queues(node, level, 1, &queue);
+ queue = parent_q;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(octeon3_pko_interface_uninit);
diff --git a/drivers/net/ethernet/cavium/octeon/octeon3-sso.c b/drivers/net/ethernet/cavium/octeon/octeon3-sso.c
new file mode 100644
index 000000000000..2c7488b53547
--- /dev/null
+++ b/drivers/net/ethernet/cavium/octeon/octeon3-sso.c
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2017 Cavium, Inc.
+ *
+ * Configuration of Schedule/Synchronize/Order (SSO) block.
+ */
+#include <linux/module.h>
+
+#include <asm/octeon/octeon.h>
+
+#include "octeon3.h"
+
+/* Registers are accessed via xkphys */
+#define SSO_BASE 0x1670000000000ull
+#define SSO_ADDR(node) (SET_XKPHYS + NODE_OFFSET(node) + \
+ SSO_BASE)
+
+#define SSO_AW_STATUS(n) (SSO_ADDR(n) + 0x000010e0)
+#define SSO_AW_CFG(n) (SSO_ADDR(n) + 0x000010f0)
+#define SSO_ERR0(n) (SSO_ADDR(n) + 0x00001240)
+#define SSO_TAQ_ADD(n) (SSO_ADDR(n) + 0x000020e0)
+#define SSO_XAQ_AURA(n) (SSO_ADDR(n) + 0x00002100)
+
+#define AQ_OFFSET(g) ((g) << 3)
+#define AQ_ADDR(n, g) (SSO_ADDR(n) + AQ_OFFSET(g))
+#define SSO_XAQ_HEAD_PTR(n, g) (AQ_ADDR(n, g) + 0x00080000)
+#define SSO_XAQ_TAIL_PTR(n, g) (AQ_ADDR(n, g) + 0x00090000)
+#define SSO_XAQ_HEAD_NEXT(n, g) (AQ_ADDR(n, g) + 0x000a0000)
+#define SSO_XAQ_TAIL_NEXT(n, g) (AQ_ADDR(n, g) + 0x000b0000)
+
+#define GRP_OFFSET(grp) ((grp) << 16)
+#define GRP_ADDR(n, g) (SSO_ADDR(n) + GRP_OFFSET(g))
+#define SSO_GRP_TAQ_THR(n, g) (GRP_ADDR(n, g) + 0x20000100)
+#define SSO_GRP_PRI(n, g) (GRP_ADDR(n, g) + 0x20000200)
+#define SSO_GRP_INT(n, g) (GRP_ADDR(n, g) + 0x20000400)
+#define SSO_GRP_INT_THR(n, g) (GRP_ADDR(n, g) + 0x20000500)
+#define SSO_GRP_AQ_CNT(n, g) (GRP_ADDR(n, g) + 0x20000700)
+
+static int get_num_sso_grps(void)
+{
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+ return 256;
+ if (OCTEON_IS_MODEL(OCTEON_CNF75XX) || OCTEON_IS_MODEL(OCTEON_CN73XX))
+ return 64;
+ return 0;
+}
+
+void octeon3_sso_irq_set(int node, int grp, bool en)
+{
+ if (en)
+ oct_csr_write(1, SSO_GRP_INT_THR(node, grp));
+ else
+ oct_csr_write(0, SSO_GRP_INT_THR(node, grp));
+
+ oct_csr_write(BIT(1), SSO_GRP_INT(node, grp));
+}
+EXPORT_SYMBOL(octeon3_sso_irq_set);
+
+/**
+ * octeon3_sso_alloc_grp_range() - Allocate a range of sso groups.
+ * @node: Node where sso resides.
+ * @req_grp: Group number to start allocating sequentially from. -1 for don't
+ * care.
+ * @req_cnt: Number of groups to allocate.
+ * @use_last_avail: Set to request the last available groups.
+ * @grp: Updated with allocated groups.
+ *
+ * Return: 0 if successful.
+ * < 0 for error codes.
+ */
+int octeon3_sso_alloc_grp_range(int node, int req_grp, int req_cnt,
+ bool use_last_avail, int *grp)
+{
+ struct global_resource_tag tag;
+ char buf[16];
+
+ /* Allocate the request group range */
+ strncpy((char *)&tag.lo, "cvm_sso_", 8);
+ snprintf(buf, 16, "0%d......", node);
+ memcpy(&tag.hi, buf, 8);
+
+ res_mgr_create_resource(tag, get_num_sso_grps());
+ return res_mgr_alloc_range(tag, req_grp, req_cnt, false, grp);
+}
+EXPORT_SYMBOL(octeon3_sso_alloc_grp_range);
+
+/**
+ * octeon3_sso_alloc_grp() - Allocate a sso group.
+ * @node: Node where sso resides.
+ * @req_grp: Group number to allocate, -1 for don't care.
+ *
+ * Return: allocated group.
+ * < 0 for error codes.
+ */
+int octeon3_sso_alloc_grp(int node, int req_grp)
+{
+ int grp;
+ int rc;
+
+ rc = octeon3_sso_alloc_grp_range(node, req_grp, 1, false, &grp);
+ if (!rc)
+ rc = grp;
+
+ return rc;
+}
+EXPORT_SYMBOL(octeon3_sso_alloc_grp);
+
+/**
+ * octeon3_sso_free_grp_range() - Free a range of sso groups.
+ * @node: Node where sso resides.
+ * @grp: Array of groups to free.
+ * @req_cnt: Number of groups to free.
+ */
+void octeon3_sso_free_grp_range(int node, int *grp, int req_cnt)
+{
+ struct global_resource_tag tag;
+ char buf[16];
+
+ /* Allocate the request group range */
+ strncpy((char *)&tag.lo, "cvm_sso_", 8);
+ snprintf(buf, 16, "0%d......", node);
+ memcpy(&tag.hi, buf, 8);
+
+ res_mgr_free_range(tag, grp, req_cnt);
+}
+EXPORT_SYMBOL(octeon3_sso_free_grp_range);
+
+/**
+ * octeon3_sso_free_grp() - Free a sso group.
+ * @node: Node where sso resides.
+ * @grp: Group to free.
+ */
+void octeon3_sso_free_grp(int node, int grp)
+{
+ octeon3_sso_free_grp_range(node, &grp, 1);
+}
+EXPORT_SYMBOL(octeon3_sso_free_grp);
+
+/**
+ * octeon3_sso_pass1_limit() - Near full TAQ can cause hang. When the TAQ
+ * (Transitory Admission Queue) is near-full, it is
+ * possible for SSO to hang.
+ * Workaround: Ensure that the sum of
+ * SSO_GRP(0..255)_TAQ_THR[MAX_THR] of all used
+ * groups is <= 1264. This may reduce single-group
+ * performance when many groups are used.
+ *
+ * @node: Node to update.
+ * @grp: SSO group to update.
+ */
+void octeon3_sso_pass1_limit(int node, int grp)
+{
+ u64 rsvd_thr;
+ u64 max_thr;
+ u64 taq_add;
+ u64 taq_thr;
+
+ /* Ideally, we would like to divide the maximum number of TAQ buffers
+ * (1264) among the sso groups in use. However, since we don't know how
+ * many sso groups are used by code outside this driver we take the
+ * worst case approach and assume all 256 sso groups must be supported.
+ */
+ max_thr = 1264 / get_num_sso_grps();
+ if (max_thr < 4)
+ max_thr = 4;
+ rsvd_thr = max_thr - 1;
+
+ /* Changes to SSO_GRP_TAQ_THR[rsvd_thr] must also update
+ * SSO_TAQ_ADD[RSVD_FREE].
+ */
+ taq_thr = oct_csr_read(SSO_GRP_TAQ_THR(node, grp));
+ taq_add = (rsvd_thr - (taq_thr & GENMASK_ULL(10, 0))) << 16;
+
+ taq_thr &= ~(GENMASK_ULL(42, 32) | GENMASK_ULL(10, 0));
+ taq_thr |= max_thr << 32;
+ taq_thr |= rsvd_thr;
+
+ oct_csr_write(taq_thr, SSO_GRP_TAQ_THR(node, grp));
+ oct_csr_write(taq_add, SSO_TAQ_ADD(node));
+}
+EXPORT_SYMBOL(octeon3_sso_pass1_limit);
+
+/**
+ * octeon3_sso_shutdown() - Shutdown the sso. It undoes what octeon3_sso_init()
+ * did.
+ * @node: Node where sso to disable is.
+ * @aura: Aura used for the sso buffers.
+ */
+void octeon3_sso_shutdown(int node, int aura)
+{
+ int max_grps;
+ int timeout;
+ u64 data;
+ int i;
+
+ /* Disable sso */
+ data = oct_csr_read(SSO_AW_CFG(node));
+ data |= BIT(6) | BIT(4);
+ data &= ~BIT(0);
+ oct_csr_write(data, SSO_AW_CFG(node));
+
+ /* Extract the fpa buffers */
+ max_grps = get_num_sso_grps();
+ for (i = 0; i < max_grps; i++) {
+ void *ptr;
+ u64 head;
+ u64 tail;
+
+ head = oct_csr_read(SSO_XAQ_HEAD_PTR(node, i));
+ tail = oct_csr_read(SSO_XAQ_TAIL_PTR(node, i));
+ data = oct_csr_read(SSO_GRP_AQ_CNT(node, i));
+
+ /* Verify pointers */
+ head &= GENMASK_ULL(41, 7);
+ tail &= GENMASK_ULL(41, 7);
+ if (head != tail) {
+ pr_err("octeon3_sso: bad ptr\n");
+ continue;
+ }
+
+ /* This sso group should have no pending entries */
+ if (data & GENMASK_ULL(32, 0))
+ pr_err("octeon3_sso: not empty\n");
+
+ ptr = phys_to_virt(head);
+ octeon_fpa3_free(node, aura, ptr);
+
+ /* Clear pointers */
+ oct_csr_write(0, SSO_XAQ_HEAD_PTR(node, i));
+ oct_csr_write(0, SSO_XAQ_HEAD_NEXT(node, i));
+ oct_csr_write(0, SSO_XAQ_TAIL_PTR(node, i));
+ oct_csr_write(0, SSO_XAQ_TAIL_NEXT(node, i));
+ }
+
+ /* Make sure all buffers drained */
+ timeout = 10000;
+ do {
+ data = oct_csr_read(SSO_AW_STATUS(node));
+ if ((data & GENMASK_ULL(5, 0)) == 0)
+ break;
+ timeout--;
+ udelay(1);
+ } while (timeout);
+ if (!timeout)
+ pr_err("octeon3_sso: timeout\n");
+}
+EXPORT_SYMBOL(octeon3_sso_shutdown);
+
+/**
+ * octeon3_sso_init() - Initialize the sso.
+ * @node: Node where sso resides.
+ * @aura: Aura used for the sso buffers.
+ */
+int octeon3_sso_init(int node, int aura)
+{
+ int max_grps;
+ int rc = 0;
+ u64 data;
+ int i;
+
+ data = BIT(3) | BIT(2) | BIT(1);
+ oct_csr_write(data, SSO_AW_CFG(node));
+
+ data = (node << 10) | aura;
+ oct_csr_write(data, SSO_XAQ_AURA(node));
+
+ max_grps = get_num_sso_grps();
+ for (i = 0; i < max_grps; i++) {
+ void *mem;
+ u64 phys;
+
+ mem = octeon_fpa3_alloc(node, aura);
+ if (!mem) {
+ rc = -ENOMEM;
+ goto err;
+ }
+
+ phys = virt_to_phys(mem);
+ oct_csr_write(phys, SSO_XAQ_HEAD_PTR(node, i));
+ oct_csr_write(phys, SSO_XAQ_HEAD_NEXT(node, i));
+ oct_csr_write(phys, SSO_XAQ_TAIL_PTR(node, i));
+ oct_csr_write(phys, SSO_XAQ_TAIL_NEXT(node, i));
+
+ /* SSO-18678 */
+ data = 0x3f << 16;
+ oct_csr_write(data, SSO_GRP_PRI(node, i));
+ }
+
+ data = BIT(0);
+ oct_csr_write(data, SSO_ERR0(node));
+
+ data = BIT(3) | BIT(2) | BIT(1) | BIT(0);
+ oct_csr_write(data, SSO_AW_CFG(node));
+
+ err:
+ return rc;
+}
+EXPORT_SYMBOL(octeon3_sso_init);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cavium, Inc. <support@cavium.com>");
+MODULE_DESCRIPTION("Cavium, Inc. SSO management.");
diff --git a/drivers/net/ethernet/cavium/octeon/octeon3.h b/drivers/net/ethernet/cavium/octeon/octeon3.h
new file mode 100644
index 000000000000..0250d8f578f4
--- /dev/null
+++ b/drivers/net/ethernet/cavium/octeon/octeon3.h
@@ -0,0 +1,430 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2017 Cavium, Inc. */
+#ifndef _OCTEON3_H_
+#define _OCTEON3_H_
+
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+
+#define MAX_NODES 2
+#define NODE_MASK (MAX_NODES - 1)
+#define MAX_BGX_PER_NODE 6
+#define MAX_LMAC_PER_BGX 4
+
+#define IOBDMA_ORDERED_IO_ADDR 0xffffffffffffa200ull
+#define LMTDMA_ORDERED_IO_ADDR 0xffffffffffffa400ull
+
+#define SCRATCH_BASE 0xffffffffffff8000ull
+#define PKO_LMTLINE 2ull
+#define LMTDMA_SCR_OFFSET (PKO_LMTLINE * CVMX_CACHE_LINE_SIZE)
+
+/* Pko sub-command three bit codes (SUBDC3) */
+#define PKO_SENDSUBDC_GATHER 0x1
+
+/* Pko sub-command four bit codes (SUBDC4) */
+#define PKO_SENDSUBDC_TSO 0x8
+#define PKO_SENDSUBDC_FREE 0x9
+#define PKO_SENDSUBDC_WORK 0xa
+#define PKO_SENDSUBDC_MEM 0xc
+#define PKO_SENDSUBDC_EXT 0xd
+
+#define BGX_RX_FIFO_SIZE (64 * 1024)
+#define BGX_TX_FIFO_SIZE (32 * 1024)
+
+/* Registers are accessed via xkphys */
+#define SET_XKPHYS BIT_ULL(63)
+#define NODE_OFFSET(node) ((node) * 0x1000000000ull)
+
+/* Bgx register definitions */
+#define BGX_BASE 0x11800e0000000ull
+#define BGX_OFFSET(bgx) (BGX_BASE + ((bgx) << 24))
+#define INDEX_OFFSET(index) ((index) << 20)
+#define INDEX_ADDR(n, b, i) (SET_XKPHYS + NODE_OFFSET(n) + \
+ BGX_OFFSET(b) + INDEX_OFFSET(i))
+#define CAM_OFFSET(mac) ((mac) << 3)
+#define CAM_ADDR(n, b, m) (INDEX_ADDR(n, b, 0) + CAM_OFFSET(m))
+
+#define BGX_CMR_CONFIG(n, b, i) (INDEX_ADDR(n, b, i) + 0x00000)
+#define BGX_CMR_GLOBAL_CONFIG(n, b) (INDEX_ADDR(n, b, 0) + 0x00008)
+#define BGX_CMR_RX_ID_MAP(n, b, i) (INDEX_ADDR(n, b, i) + 0x00028)
+#define BGX_CMR_RX_BP_ON(n, b, i) (INDEX_ADDR(n, b, i) + 0x00088)
+#define BGX_CMR_RX_ADR_CTL(n, b, i) (INDEX_ADDR(n, b, i) + 0x000a0)
+#define BGX_CMR_RX_FIFO_LEN(n, b, i) (INDEX_ADDR(n, b, i) + 0x000c0)
+#define BGX_CMR_RX_ADRX_CAM(n, b, m) (CAM_ADDR(n, b, m) + 0x00100)
+#define BGX_CMR_CHAN_MSK_AND(n, b) (INDEX_ADDR(n, b, 0) + 0x00200)
+#define BGX_CMR_CHAN_MSK_OR(n, b) (INDEX_ADDR(n, b, 0) + 0x00208)
+#define BGX_CMR_TX_FIFO_LEN(n, b, i) (INDEX_ADDR(n, b, i) + 0x00418)
+#define BGX_CMR_TX_LMACS(n, b) (INDEX_ADDR(n, b, 0) + 0x01000)
+
+#define BGX_SPU_CONTROL1(n, b, i) (INDEX_ADDR(n, b, i) + 0x10000)
+#define BGX_SPU_STATUS1(n, b, i) (INDEX_ADDR(n, b, i) + 0x10008)
+#define BGX_SPU_STATUS2(n, b, i) (INDEX_ADDR(n, b, i) + 0x10020)
+#define BGX_SPU_BX_STATUS(n, b, i) (INDEX_ADDR(n, b, i) + 0x10028)
+#define BGX_SPU_BR_STATUS1(n, b, i) (INDEX_ADDR(n, b, i) + 0x10030)
+#define BGX_SPU_BR_STATUS2(n, b, i) (INDEX_ADDR(n, b, i) + 0x10038)
+#define BGX_SPU_BR_BIP_ERR_CNT(n, b, i) (INDEX_ADDR(n, b, i) + 0x10058)
+#define BGX_SPU_BR_PMD_CONTROL(n, b, i) (INDEX_ADDR(n, b, i) + 0x10068)
+#define BGX_SPU_BR_PMD_LP_CUP(n, b, i) (INDEX_ADDR(n, b, i) + 0x10078)
+#define BGX_SPU_BR_PMD_LD_CUP(n, b, i) (INDEX_ADDR(n, b, i) + 0x10088)
+#define BGX_SPU_BR_PMD_LD_REP(n, b, i) (INDEX_ADDR(n, b, i) + 0x10090)
+#define BGX_SPU_FEC_CONTROL(n, b, i) (INDEX_ADDR(n, b, i) + 0x100a0)
+#define BGX_SPU_AN_CONTROL(n, b, i) (INDEX_ADDR(n, b, i) + 0x100c8)
+#define BGX_SPU_AN_STATUS(n, b, i) (INDEX_ADDR(n, b, i) + 0x100d0)
+#define BGX_SPU_AN_ADV(n, b, i) (INDEX_ADDR(n, b, i) + 0x100d8)
+#define BGX_SPU_MISC_CONTROL(n, b, i) (INDEX_ADDR(n, b, i) + 0x10218)
+#define BGX_SPU_INT(n, b, i) (INDEX_ADDR(n, b, i) + 0x10220)
+#define BGX_SPU_DBG_CONTROL(n, b) (INDEX_ADDR(n, b, 0) + 0x10300)
+
+#define BGX_SMU_RX_INT(n, b, i) (INDEX_ADDR(n, b, i) + 0x20000)
+#define BGX_SMU_RX_FRM_CTL(n, b, i) (INDEX_ADDR(n, b, i) + 0x20008)
+#define BGX_SMU_RX_JABBER(n, b, i) (INDEX_ADDR(n, b, i) + 0x20018)
+#define BGX_SMU_RX_CTL(n, b, i) (INDEX_ADDR(n, b, i) + 0x20030)
+#define BGX_SMU_TX_APPEND(n, b, i) (INDEX_ADDR(n, b, i) + 0x20100)
+#define BGX_SMU_TX_MIN_PKT(n, b, i) (INDEX_ADDR(n, b, i) + 0x20118)
+#define BGX_SMU_TX_INT(n, b, i) (INDEX_ADDR(n, b, i) + 0x20140)
+#define BGX_SMU_TX_CTL(n, b, i) (INDEX_ADDR(n, b, i) + 0x20160)
+#define BGX_SMU_TX_THRESH(n, b, i) (INDEX_ADDR(n, b, i) + 0x20168)
+#define BGX_SMU_CTRL(n, b, i) (INDEX_ADDR(n, b, i) + 0x20200)
+
+#define BGX_GMP_PCS_MR_CONTROL(n, b, i) (INDEX_ADDR(n, b, i) + 0x30000)
+#define BGX_GMP_PCS_MR_STATUS(n, b, i) (INDEX_ADDR(n, b, i) + 0x30008)
+#define BGX_GMP_PCS_AN_ADV(n, b, i) (INDEX_ADDR(n, b, i) + 0x30010)
+#define BGX_GMP_PCS_LINK_TIMER(n, b, i) (INDEX_ADDR(n, b, i) + 0x30040)
+#define BGX_GMP_PCS_SGM_AN_ADV(n, b, i) (INDEX_ADDR(n, b, i) + 0x30068)
+#define BGX_GMP_PCS_MISC_CTL(n, b, i) (INDEX_ADDR(n, b, i) + 0x30078)
+#define BGX_GMP_GMI_PRT_CFG(n, b, i) (INDEX_ADDR(n, b, i) + 0x38010)
+#define BGX_GMP_GMI_RX_FRM_CTL(n, b, i) (INDEX_ADDR(n, b, i) + 0x38018)
+#define BGX_GMP_GMI_RX_JABBER(n, b, i) (INDEX_ADDR(n, b, i) + 0x38038)
+#define BGX_GMP_GMI_TX_THRESH(n, b, i) (INDEX_ADDR(n, b, i) + 0x38210)
+#define BGX_GMP_GMI_TX_APPEND(n, b, i) (INDEX_ADDR(n, b, i) + 0x38218)
+#define BGX_GMP_GMI_TX_SLOT(n, b, i) (INDEX_ADDR(n, b, i) + 0x38220)
+#define BGX_GMP_GMI_TX_BURST(n, b, i) (INDEX_ADDR(n, b, i) + 0x38228)
+#define BGX_GMP_GMI_TX_MIN_PKT(n, b, i) (INDEX_ADDR(n, b, i) + 0x38240)
+#define BGX_GMP_GMI_TX_SGMII_CTL(n, b, i) (INDEX_ADDR(n, b, i) + 0x38300)
+
+/* XCV register definitions */
+#define XCV_BASE 0x11800db000000ull
+#define SET_XCV_BASE(node) (SET_XKPHYS + NODE_OFFSET(node) + \
+ XCV_BASE)
+#define XCV_RESET(node) (SET_XCV_BASE(node) + 0x0000)
+#define XCV_DLL_CTL(node) (SET_XCV_BASE(node) + 0x0010)
+#define XCV_COMP_CTL(node) (SET_XCV_BASE(node) + 0x0020)
+#define XCV_CTL(node) (SET_XCV_BASE(node) + 0x0030)
+#define XCV_INT(node) (SET_XCV_BASE(node) + 0x0040)
+#define XCV_INBND_STATUS(node) (SET_XCV_BASE(node) + 0x0080)
+#define XCV_BATCH_CRD_RET(node) (SET_XCV_BASE(node) + 0x0100)
+
+/* Gser register definitions */
+#define GSER_BASE 0x1180090000000ull
+#define GSER_OFFSET(gser) (GSER_BASE + ((gser) << 24))
+#define GSER_LANE_OFFSET(lane) ((lane) << 20)
+#define GSER_LANE_ADDR(n, g, l) (SET_XKPHYS + NODE_OFFSET(n) + \
+ GSER_OFFSET(g) + GSER_LANE_OFFSET(l))
+#define GSER_PHY_CTL(n, g) (GSER_LANE_ADDR(n, g, 0) + 0x000000)
+#define GSER_CFG(n, g) (GSER_LANE_ADDR(n, g, 0) + 0x000080)
+#define GSER_LANE_MODE(n, g) (GSER_LANE_ADDR(n, g, 0) + 0x000118)
+#define GSER_RX_EIE_DETSTS(n, g) (GSER_LANE_ADDR(n, g, 0) + 0x000150)
+#define GSER_LANE_LBERT_CFG(n, g, l) (GSER_LANE_ADDR(n, g, l) + 0x4c0020)
+#define GSER_LANE_PCS_CTLIFC_0(n, g, l) (GSER_LANE_ADDR(n, g, l) + 0x4c0060)
+#define GSER_LANE_PCS_CTLIFC_2(n, g, l) (GSER_LANE_ADDR(n, g, l) + 0x4c0070)
+
+/* Odd gser registers */
+#define GSER_LANE_OFFSET_1(lane) ((lane) << 7)
+#define GSER_LANE_ADDR_1(n, g, l) (SET_XKPHYS + NODE_OFFSET(n) + \
+ GSER_OFFSET(g) + GSER_LANE_OFFSET_1(l))
+
+#define GSER_BR_RX_CTL(n, g, l) (GSER_LANE_ADDR_1(n, g, l) + 0x000400)
+#define GSER_BR_RX_EER(n, g, l) (GSER_LANE_ADDR_1(n, g, l) + 0x000418)
+
+#define GSER_LANE_OFFSET_2(mode) ((mode) << 5)
+#define GSER_LANE_ADDR_2(n, g, m) (SET_XKPHYS + NODE_OFFSET(n) + \
+ GSER_OFFSET(g) + GSER_LANE_OFFSET_2(m))
+
+#define GSER_LANE_P_MODE_1(n, g, m) (GSER_LANE_ADDR_2(n, g, m) + 0x4e0048)
+
+#define DPI_BASE 0x1df0000000000ull
+#define DPI_ADDR(n) (SET_XKPHYS + NODE_OFFSET(n) + DPI_BASE)
+#define DPI_CTL(n) (DPI_ADDR(n) + 0x00040)
+
+enum octeon3_mac_type {
+ BGX_MAC,
+ SRIO_MAC
+};
+
+enum octeon3_src_type {
+ QLM,
+ XCV
+};
+
+struct mac_platform_data {
+ enum octeon3_mac_type mac_type;
+ int numa_node;
+ int interface;
+ int port;
+ enum octeon3_src_type src_type;
+};
+
+struct bgx_port_netdev_priv {
+ struct bgx_port_priv *bgx_priv;
+};
+
+/* Remove this define to use these enums after the last cvmx code
+ * references are gone.
+ */
+/* PKO_MEMDSZ_E */
+enum pko_memdsz_e {
+ MEMDSZ_B64 = 0,
+ MEMDSZ_B32 = 1,
+ MEMDSZ_B16 = 2,
+ MEMDSZ_B8 = 3
+};
+
+/* PKO_MEMALG_E */
+enum pko_memalg_e {
+ MEMALG_SET = 0,
+ MEMALG_SETTSTMP = 1,
+ MEMALG_SETRSLT = 2,
+ MEMALG_ADD = 8,
+ MEMALG_SUB = 9,
+ MEMALG_ADDLEN = 0xA,
+ MEMALG_SUBLEN = 0xB,
+ MEMALG_ADDMBUF = 0xC,
+ MEMALG_SUBMBUF = 0xD
+};
+
+/* PKO_QUERY_RTN_S[DQSTATUS] */
+enum pko_query_dqstatus {
+ PKO_DQSTATUS_PASS = 0,
+ PKO_DQSTATUS_BADSTATE = 0x8,
+ PKO_DQSTATUS_NOFPABUF = 0x9,
+ PKO_DQSTATUS_NOPKOBUF = 0xA,
+ PKO_DQSTATUS_FAILRTNPTR = 0xB,
+ PKO_DQSTATUS_ALREADY = 0xC,
+ PKO_DQSTATUS_NOTCREATED = 0xD,
+ PKO_DQSTATUS_NOTEMPTY = 0xE,
+ PKO_DQSTATUS_SENDPKTDROP = 0xF
+};
+
+union wqe_word0 {
+ u64 u64;
+ struct {
+ __BITFIELD_FIELD(u64 rsvd_0:4,
+ __BITFIELD_FIELD(u64 aura:12,
+ __BITFIELD_FIELD(u64 rsvd_1:1,
+ __BITFIELD_FIELD(u64 apad:3,
+ __BITFIELD_FIELD(u64 channel:12,
+ __BITFIELD_FIELD(u64 bufs:8,
+ __BITFIELD_FIELD(u64 style:8,
+ __BITFIELD_FIELD(u64 rsvd_2:10,
+ __BITFIELD_FIELD(u64 pknd:6,
+ ;)))))))))
+ };
+};
+
+union wqe_word1 {
+ u64 u64;
+ struct {
+ __BITFIELD_FIELD(u64 len:16,
+ __BITFIELD_FIELD(u64 rsvd_0:2,
+ __BITFIELD_FIELD(u64 rsvd_1:2,
+ __BITFIELD_FIELD(u64 grp:10,
+ __BITFIELD_FIELD(u64 tag_type:2,
+ __BITFIELD_FIELD(u64 tag:32,
+ ;))))))
+ };
+};
+
+union wqe_word2 {
+ u64 u64;
+ struct {
+ __BITFIELD_FIELD(u64 software:1,
+ __BITFIELD_FIELD(u64 lg_hdr_type:5,
+ __BITFIELD_FIELD(u64 lf_hdr_type:5,
+ __BITFIELD_FIELD(u64 le_hdr_type:5,
+ __BITFIELD_FIELD(u64 ld_hdr_type:5,
+ __BITFIELD_FIELD(u64 lc_hdr_type:5,
+ __BITFIELD_FIELD(u64 lb_hdr_type:5,
+ __BITFIELD_FIELD(u64 is_la_ether:1,
+ __BITFIELD_FIELD(u64 rsvd_0:8,
+ __BITFIELD_FIELD(u64 vlan_valid:1,
+ __BITFIELD_FIELD(u64 vlan_stacked:1,
+ __BITFIELD_FIELD(u64 stat_inc:1,
+ __BITFIELD_FIELD(u64 pcam_flag4:1,
+ __BITFIELD_FIELD(u64 pcam_flag3:1,
+ __BITFIELD_FIELD(u64 pcam_flag2:1,
+ __BITFIELD_FIELD(u64 pcam_flag1:1,
+ __BITFIELD_FIELD(u64 is_frag:1,
+ __BITFIELD_FIELD(u64 is_l3_bcast:1,
+ __BITFIELD_FIELD(u64 is_l3_mcast:1,
+ __BITFIELD_FIELD(u64 is_l2_bcast:1,
+ __BITFIELD_FIELD(u64 is_l2_mcast:1,
+ __BITFIELD_FIELD(u64 is_raw:1,
+ __BITFIELD_FIELD(u64 err_level:3,
+ __BITFIELD_FIELD(u64 err_code:8,
+ ;))))))))))))))))))))))))
+ };
+};
+
+union buf_ptr {
+ u64 u64;
+ struct {
+ __BITFIELD_FIELD(u64 size:16,
+ __BITFIELD_FIELD(u64 packet_outside_wqe:1,
+ __BITFIELD_FIELD(u64 rsvd0:5,
+ __BITFIELD_FIELD(u64 addr:42,
+ ;))))
+ };
+};
+
+union wqe_word4 {
+ u64 u64;
+ struct {
+ __BITFIELD_FIELD(u64 ptr_vlan:8,
+ __BITFIELD_FIELD(u64 ptr_layer_g:8,
+ __BITFIELD_FIELD(u64 ptr_layer_f:8,
+ __BITFIELD_FIELD(u64 ptr_layer_e:8,
+ __BITFIELD_FIELD(u64 ptr_layer_d:8,
+ __BITFIELD_FIELD(u64 ptr_layer_c:8,
+ __BITFIELD_FIELD(u64 ptr_layer_b:8,
+ __BITFIELD_FIELD(u64 ptr_layer_a:8,
+ ;))))))))
+ };
+};
+
+struct wqe {
+ union wqe_word0 word0;
+ union wqe_word1 word1;
+ union wqe_word2 word2;
+ union buf_ptr packet_ptr;
+ union wqe_word4 word4;
+ u64 wqe_data[11];
+};
+
+enum port_mode {
+ PORT_MODE_DISABLED,
+ PORT_MODE_SGMII,
+ PORT_MODE_RGMII,
+ PORT_MODE_XAUI,
+ PORT_MODE_RXAUI,
+ PORT_MODE_XLAUI,
+ PORT_MODE_XFI,
+ PORT_MODE_10G_KR,
+ PORT_MODE_40G_KR4
+};
+
+enum lane_mode {
+ R_25G_REFCLK100,
+ R_5G_REFCLK100,
+ R_8G_REFCLK100,
+ R_125G_REFCLK15625_KX,
+ R_3125G_REFCLK15625_XAUI,
+ R_103125G_REFCLK15625_KR,
+ R_125G_REFCLK15625_SGMII,
+ R_5G_REFCLK15625_QSGMII,
+ R_625G_REFCLK15625_RXAUI,
+ R_25G_REFCLK125,
+ R_5G_REFCLK125,
+ R_8G_REFCLK125
+};
+
+struct port_status {
+ int link;
+ int duplex;
+ int speed;
+};
+
+static inline u64 oct_csr_read(u64 addr)
+{
+ return __raw_readq((void __iomem *)addr);
+}
+
+static inline void oct_csr_write(u64 data, u64 addr)
+{
+ __raw_writeq(data, (void __iomem *)addr);
+}
+
+static inline int bgx_addr_to_interface(u64 addr)
+{
+ return (addr >> 24) & 0xf;
+}
+
+static inline int bgx_node_to_numa_node(struct device_node *np)
+{
+ int ret = of_node_to_nid(np);
+
+ return ret == NUMA_NO_NODE ? 0 : ret;
+}
+
+extern int ilk0_lanes;
+extern int ilk1_lanes;
+
+void bgx_nexus_load(void);
+
+int bgx_port_allocate_pknd(int node);
+int bgx_port_get_pknd(int node, int bgx, int index);
+enum port_mode bgx_port_get_mode(int node, int bgx, int index);
+int bgx_port_get_qlm(int node, int bgx, int index);
+void bgx_port_set_netdev(struct device *dev, struct net_device *netdev);
+int bgx_port_enable(struct net_device *netdev);
+int bgx_port_disable(struct net_device *netdev);
+const u8 *bgx_port_get_mac(struct net_device *netdev);
+void bgx_port_set_rx_filtering(struct net_device *netdev);
+int bgx_port_change_mtu(struct net_device *netdev, int new_mtu);
+int bgx_port_ethtool_get_link_ksettings(struct net_device *netdev,
+ struct ethtool_link_ksettings *cmd);
+int bgx_port_ethtool_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *cmd);
+int bgx_port_ethtool_set_settings(struct net_device *netdev,
+ struct ethtool_cmd *cmd);
+int bgx_port_ethtool_nway_reset(struct net_device *netdev);
+int bgx_port_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
+
+void bgx_port_mix_assert_reset(struct net_device *netdev, int mix, bool v);
+
+int octeon3_pki_vlan_init(int node);
+int octeon3_pki_cluster_init(int node, struct platform_device *pdev);
+int octeon3_pki_ltype_init(int node);
+int octeon3_pki_enable(int node);
+int octeon3_pki_port_init(int node, int aura, int grp, int skip, int mb_size,
+ int pknd, int num_rx_cxt);
+int octeon3_pki_get_stats(int node, int pknd, u64 *packets, u64 *octets,
+ u64 *dropped);
+int octeon3_pki_set_ptp_skip(int node, int pknd, int skip);
+int octeon3_pki_port_shutdown(int node, int pknd);
+void octeon3_pki_shutdown(int node);
+
+void octeon3_sso_pass1_limit(int node, int grp);
+int octeon3_sso_init(int node, int aura);
+void octeon3_sso_shutdown(int node, int aura);
+int octeon3_sso_alloc_grp(int node, int grp);
+int octeon3_sso_alloc_grp_range(int node, int req_grp, int req_cnt,
+ bool use_last_avail, int *grp);
+void octeon3_sso_free_grp(int node, int grp);
+void octeon3_sso_free_grp_range(int node, int *grp, int req_cnt);
+void octeon3_sso_irq_set(int node, int grp, bool en);
+
+int octeon3_pko_interface_init(int node, int interface, int index,
+ enum octeon3_mac_type mac_type, int ipd_port);
+int octeon3_pko_activate_dq(int node, int dq, int cnt);
+int octeon3_pko_get_fifo_size(int node, int interface, int index,
+ enum octeon3_mac_type mac_type);
+int octeon3_pko_set_mac_options(int node, int interface, int index,
+ enum octeon3_mac_type mac_type, bool fcs_en,
+ bool pad_en, int fcs_sop_off);
+int octeon3_pko_init_global(int node, int aura);
+int octeon3_pko_interface_uninit(int node, const int *dq, int num_dq);
+int octeon3_pko_exit_global(int node);
+
+int octeon_fpa3_init(int node);
+int octeon_fpa3_pool_init(int node, int pool_num, int *pool, void **pool_stack,
+ int num_ptrs);
+int octeon_fpa3_aura_init(int node, int pool, int aura_num, int *aura,
+ int num_bufs, unsigned int limit);
+int octeon_fpa3_mem_fill(int node, struct kmem_cache *cache, int aura,
+ int num_bufs);
+void octeon_fpa3_free(int node, int aura, const void *buf);
+void *octeon_fpa3_alloc(int node, int aura);
+void octeon_fpa3_release_pool(int node, int pool);
+void octeon_fpa3_release_aura(int node, int aura);
+
+#endif /* _OCTEON3_H_ */
--
2.14.3
^ permalink raw reply related
* [PATCH v6 net-next,mips 7/7] MAINTAINERS: Add entry for drivers/net/ethernet/cavium/octeon/octeon3-*
From: David Daney @ 2017-12-08 0:09 UTC (permalink / raw)
To: linux-mips, ralf, James Hogan, netdev, David S. Miller,
Rob Herring, Mark Rutland
Cc: linux-kernel, Steven J. Hill, devicetree, Andrew Lunn,
Florian Fainelli, Philippe Ombredanne, David Daney
In-Reply-To: <20171208000934.6554-1-david.daney@cavium.com>
Signed-off-by: David Daney <david.daney@cavium.com>
---
MAINTAINERS | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 4007fa2e193e..b4bf5b205380 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3249,6 +3249,12 @@ W: http://www.cavium.com
S: Supported
F: drivers/mmc/host/cavium*
+CAVIUM OCTEON-III NETWORK DRIVER
+M: David Daney <david.daney@cavium.com>
+L: netdev@vger.kernel.org
+S: Supported
+F: drivers/net/ethernet/cavium/octeon/octeon3-*
+
CAVIUM OCTEON-TX CRYPTO DRIVER
M: George Cherian <george.cherian@cavium.com>
L: linux-crypto@vger.kernel.org
--
2.14.3
^ permalink raw reply related
* Re: [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
From: Yixun Lan @ 2017-12-08 1:14 UTC (permalink / raw)
To: Rob Herring
Cc: yixun.lan, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Mark Rutland, Michael Turquette, Stephen Boyd, Carlo Caione,
Qiufang Dai, Jian Hu, linux-amlogic, devicetree, linux-clk,
linux-arm-kernel, linux-kernel
In-Reply-To: <20171207221014.6qwcb43w5hms4ma5@rob-hp-laptop>
On 12/08/17 06:10, Rob Herring wrote:
> On Thu, Dec 07, 2017 at 05:52:58PM +0800, Yixun Lan wrote:
>> From: Qiufang Dai <qiufang.dai@amlogic.com>
>>
>> Add the required header for the clocks ID dt-bindings
>> exported from various subsystem in the Meson-AXG SoC.
>>
>> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>> ---
>> include/dt-bindings/clock/axg-clkc.h | 71 ++++++++++++++++++++++++++++++++++++
>> 1 file changed, 71 insertions(+)
>> create mode 100644 include/dt-bindings/clock/axg-clkc.h
>
> Please add acks when posting new versions.
>
HI Rob
thanks for the suggestion, I will keep this in mind
^ permalink raw reply
* 答复: [PATCH v6 2/5] dt-bindings: scsi: ufs: add document for hisi-ufs
From: liwei (CM) @ 2017-12-08 1:22 UTC (permalink / raw)
To: Rob Herring
Cc: mark.rutland@arm.com, catalin.marinas@arm.com,
will.deacon@arm.com, eric@anholt.net, krzk@kernel.org,
vinholikatti@gmail.com, jejb@linux.vnet.ibm.com,
linux-scsi@vger.kernel.org, khilman@baylibre.com, zangleigang,
xuwei (O), zhangfei.gao@linaro.org, treding@nvidia.com,
devicetree@vger.kernel.org, arnd@arndb.de,
Fengbaopeng (kevin, Kirin Solution Dept),
gregory.clement@free-electrons.com, linux-arm-kernel
In-Reply-To: <20171207233548.kcgtlxfdsh3ibsxu@rob-hp-laptop>
Hi, Rob
Thank you for your attention ,it's the new version. The bellow is no use, so I'll remove it next patch.
> + freq-table-hz = <0 0>, <0 0>;
In the new version, we remove some no use codes in the driver; And taking into account the our next hi3670 platform, some of the public functions in the drive are extracted.
In addition:
1) we do not have a single area that controls PHY as Qualcomm, so "phy_clk" remains the same.
2）"rst", "assert" is not generic and related with our soc implementation, So it's kept and there's no change.
-----邮件原件-----
发件人: Rob Herring [mailto:robh@kernel.org]
发送时间: 2017年12月8日 7:36
收件人: liwei (CM)
抄送: mark.rutland@arm.com; xuwei (O); catalin.marinas@arm.com; will.deacon@arm.com; vinholikatti@gmail.com; jejb@linux.vnet.ibm.com; martin.petersen@oracle.com; khilman@baylibre.com; arnd@arndb.de; gregory.clement@free-electrons.com; thomas.petazzoni@free-electrons.com; yamada.masahiro@socionext.com; riku.voipio@linaro.org; treding@nvidia.com; krzk@kernel.org; eric@anholt.net; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-scsi@vger.kernel.org; zangleigang; Gengjianfeng; guodong.xu@linaro.org; zhangfei.gao@linaro.org; Fengbaopeng (kevin, Kirin Solution Dept)
主题: Re: [PATCH v6 2/5] dt-bindings: scsi: ufs: add document for hisi-ufs
On Thu, Dec 07, 2017 at 06:20:23PM +0800, Li Wei wrote:
> add ufs node document for Hisilicon.
>
> Signed-off-by: Li Wei <liwei213@huawei.com>
> ---
Version history?
> Documentation/devicetree/bindings/ufs/ufs-hisi.txt | 38 ++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/ufs/ufs-hisi.txt
>
> diff --git a/Documentation/devicetree/bindings/ufs/ufs-hisi.txt b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
> new file mode 100644
> index 000000000000..73e10698960e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
> @@ -0,0 +1,38 @@
> +* Hisilicon Universal Flash Storage (UFS) Host Controller
> +
> +UFS nodes are defined to describe on-chip UFS hardware macro.
> +Each UFS Host Controller should have its own node.
> +
> +Required properties:
> +- compatible : compatible list, contains one of the following -
> + "hisilicon,hi3660-ufs", "jedec,ufs-1.1" for hisi ufs
> + host controller present on Hi36xx chipset.
> +- reg : should contain UFS register address space & UFS SYS CTRL register address,
> +- interrupt-parent : interrupt device
> +- interrupts : interrupt number
> +- clocks : List of phandle and clock specifier pairs
> +- clock-names : List of clock input name strings sorted in the same
> + order as the clocks property. "ref_clk", "phy_clk" is optional
> +- resets : reset node register, one reset the clk and the other reset the controller
> +- reset-names : describe reset node register
> +
> +Example:
> +
> + ufs: ufs@ff3b0000 {
> + compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
> + /* 0: HCI standard */
> + /* 1: UFS SYS CTRL */
> + reg = <0x0 0xff3b0000 0x0 0x1000>,
> + <0x0 0xff3b1000 0x0 0x1000>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
> + <&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
> + clock-names = "ref_clk", "phy_clk";
> + freq-table-hz = <0 0>, <0 0>;
? Not documented.
> + /* offset: 0x84; bit: 12 */
> + /* offset: 0x84; bit: 7 */
> + resets = <&crg_rst 0x84 12>,
> + <&crg_rst 0x84 7>;
> + reset-names = "rst", "assert";
> + };
> --
> 2.15.0
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* 答复: [PATCH v6 1/5] scsi: ufs: add Hisilicon ufs driver code
From: liwei (CM) @ 2017-12-08 1:25 UTC (permalink / raw)
To: Philippe Ombredanne
Cc: Rob Herring, Mark Rutland, xuwei (O), Catalin Marinas,
Will Deacon, vinholikatti@gmail.com, James E.J. Bottomley,
Martin K. Petersen, khilman@baylibre.com, Arnd Bergmann,
gregory.clement@free-electrons.com, Thomas Petazzoni,
yamada.masahiro@socionext.com, riku.voipio@linaro.org,
treding@nvidia.com, krzk@kernel.org, eric
In-Reply-To: <CAOFm3uEgT4gzusQpXb3SnriTdU0nAha2tcVKOoZJRjZw=dx7sg@mail.gmail.com>
Hi,Philippe,
Thank you for your suggestion, and I'll consider that next patch.
-----邮件原件-----
发件人: Philippe Ombredanne [mailto:pombredanne@nexb.com]
发送时间: 2017年12月7日 18:34
收件人: liwei (CM)
抄送: Rob Herring; Mark Rutland; xuwei (O); Catalin Marinas; Will Deacon; vinholikatti@gmail.com; James E.J. Bottomley; Martin K. Petersen; khilman@baylibre.com; Arnd Bergmann; gregory.clement@free-electrons.com; Thomas Petazzoni; yamada.masahiro@socionext.com; riku.voipio@linaro.org; treding@nvidia.com; krzk@kernel.org; eric@anholt.net; open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS; LKML; moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE; linux-scsi@vger.kernel.org; zangleigang; Gengjianfeng; guodong.xu@linaro.org; zhangfei.gao@linaro.org; Fengbaopeng (kevin, Kirin Solution Dept)
主题: Re: [PATCH v6 1/5] scsi: ufs: add Hisilicon ufs driver code
Dear Li,
On Thu, Dec 7, 2017 at 11:20 AM, Li Wei <liwei213@huawei.com> wrote:
> add Hisilicon ufs driver code.
>
> Signed-off-by: Li Wei <liwei213@huawei.com>
> Signed-off-by: Geng Jianfeng <gengjianfeng@hisilicon.com>
> Signed-off-by: Zang Leigang <zangleigang@hisilicon.com>
> Signed-off-by: Yu Jianfeng <steven.yujianfeng@hisilicon.com>
[]
> --- /dev/null
> +++ b/drivers/scsi/ufs/ufs-hisi.c
> @@ -0,0 +1,624 @@
> +/*
> + *
> + * HiSilicon Hixxxx UFS Driver
> + *
> + * Copyright (c) 2016-2017 Linaro Ltd.
> + * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or
> +modify
> + * it under the terms of the GNU General Public License as published
> +by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
Would you consider using the new SPDX license ids instead?
Check Thomas doc patches for instructions.
This would be great and while you are it may be this could be adopted for all HiSilicon and Huawei past, present and future contributions?
Thank you for your kind consideration!
--
Cordially
Philippe Ombredanne
^ permalink raw reply
* Re: [PATCH v7 2/2] media: i2c: Add the ov7740 image sensor driver
From: Yang, Wenyou @ 2017-12-08 1:44 UTC (permalink / raw)
To: Sakari Ailus
Cc: Mauro Carvalho Chehab, Rob Herring, Mark Rutland, linux-kernel,
Nicolas Ferre, devicetree, Jonathan Corbet, Hans Verkuil,
linux-arm-kernel, Linux Media Mailing List, Songjun Wu
In-Reply-To: <20171207131643.syotl3iwtsqacqay@valkosipuli.retiisi.org.uk>
Hi Sakari,
On 2017/12/7 21:16, Sakari Ailus wrote:
> Hi Wenyou,
>
> On Wed, Dec 06, 2017 at 10:23:43AM +0800, Wenyou Yang wrote:
>> The ov7740 (color) image sensor is a high performance VGA CMOS
>> image snesor, which supports for output formats: RAW RGB and YUV
>> and image sizes: VGA, and QVGA, CIF and any size smaller.
>>
>> Signed-off-by: Songjun Wu <songjun.wu@microchip.com>
>> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
>> ---
>>
>> Changes in v7:
>> - Fix the wrong handle of default register configuration.
>> - Add the missed assignment of ov7740->frmsize.
>>
>> Changes in v6:
>> - Remove unnecessary #include <linux/init>.
>> - Remove unnecessary comments and extra newline.
>> - Add const for some structures.
>> - Add the check of the return value from regmap_write().
>> - Simplify the calling of __v4l2_ctrl_handler_setup().
>> - Add the default format initialization function.
>> - Integrate the set_power() and enable/disable the clock into
>> one function.
>>
>> Changes in v5:
>> - Squash the driver and MAINTAINERS entry patches to one.
>> - Precede the driver patch with the bindings patch.
>>
>> Changes in v4:
>> - Assign 'val' a initial value to avoid warning: 'val' may be
>> used uninitialized.
>> - Rename REG_REG15 to avoid warning: "REG_REG15" redefined.
>>
>> Changes in v3:
>> - Put the MAINTAINERS change to a separate patch.
>>
>> Changes in v2:
>> - Split off the bindings into a separate patch.
>> - Add a new entry to the MAINTAINERS file.
>>
>> MAINTAINERS | 8 +
>> drivers/media/i2c/Kconfig | 8 +
>> drivers/media/i2c/Makefile | 1 +
>> drivers/media/i2c/ov7740.c | 1234 ++++++++++++++++++++++++++++++++++++++++++++
>> 4 files changed, 1251 insertions(+)
>> create mode 100644 drivers/media/i2c/ov7740.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 7a52a66aa991..1de965009b13 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -10053,6 +10053,14 @@ S: Maintained
>> F: drivers/media/i2c/ov7670.c
>> F: Documentation/devicetree/bindings/media/i2c/ov7670.txt
>>
>> +OMNIVISION OV7740 SENSOR DRIVER
>> +M: Wenyou Yang <wenyou.yang@microchip.com>
>> +L: linux-media@vger.kernel.org
>> +T: git git://linuxtv.org/media_tree.git
>> +S: Maintained
>> +F: drivers/media/i2c/ov7740.c
>> +F: Documentation/devicetree/bindings/media/i2c/ov7740.txt
>> +
>> ONENAND FLASH DRIVER
>> M: Kyungmin Park <kyungmin.park@samsung.com>
>> L: linux-mtd@lists.infradead.org
>> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
>> index cb5d7ff82915..00b1c4c031d4 100644
>> --- a/drivers/media/i2c/Kconfig
>> +++ b/drivers/media/i2c/Kconfig
>> @@ -665,6 +665,14 @@ config VIDEO_OV7670
>> OV7670 VGA camera. It currently only works with the M88ALP01
>> controller.
>>
>> +config VIDEO_OV7740
>> + tristate "OmniVision OV7740 sensor support"
>> + depends on I2C && VIDEO_V4L2
>> + depends on MEDIA_CAMERA_SUPPORT
>> + ---help---
>> + This is a Video4Linux2 sensor-level driver for the OmniVision
>> + OV7740 VGA camera sensor.
>> +
>> config VIDEO_OV9650
>> tristate "OmniVision OV9650/OV9652 sensor support"
>> depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
>> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
>> index 548a9efce966..9b19ec7fcaf4 100644
>> --- a/drivers/media/i2c/Makefile
>> +++ b/drivers/media/i2c/Makefile
>> @@ -68,6 +68,7 @@ obj-$(CONFIG_VIDEO_OV5670) += ov5670.o
>> obj-$(CONFIG_VIDEO_OV6650) += ov6650.o
>> obj-$(CONFIG_VIDEO_OV7640) += ov7640.o
>> obj-$(CONFIG_VIDEO_OV7670) += ov7670.o
>> +obj-$(CONFIG_VIDEO_OV7740) += ov7740.o
>> obj-$(CONFIG_VIDEO_OV9650) += ov9650.o
>> obj-$(CONFIG_VIDEO_OV13858) += ov13858.o
>> obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o
>> diff --git a/drivers/media/i2c/ov7740.c b/drivers/media/i2c/ov7740.c
>> new file mode 100644
>> index 000000000000..26b56a627377
>> --- /dev/null
>> +++ b/drivers/media/i2c/ov7740.c
>> @@ -0,0 +1,1234 @@
>> +/*
>> + * Copyright (c) 2017 Microchip Corporation.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License version
>> + * 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + */
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/gpio.h>
>> +#include <linux/i2c.h>
>> +#include <linux/module.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/regmap.h>
>> +#include <media/v4l2-ctrls.h>
>> +#include <media/v4l2-event.h>
>> +#include <media/v4l2-image-sizes.h>
>> +#include <media/v4l2-subdev.h>
>> +
>> +#define REG_OUTSIZE_LSB 0x34
>> +
>> +/* OV7740 register tables */
>> +#define REG_GAIN 0x00 /* Gain lower 8 bits (rest in vref) */
>> +#define REG_BGAIN 0x01 /* blue gain */
>> +#define REG_RGAIN 0x02 /* red gain */
>> +#define REG_GGAIN 0x03 /* green gain */
>> +#define REG_REG04 0x04 /* analog setting, dont change*/
>> +#define REG_BAVG 0x05 /* b channel average */
>> +#define REG_GAVG 0x06 /* g channel average */
>> +#define REG_RAVG 0x07 /* r channel average */
>> +
>> +#define REG_REG0C 0x0C /* filp enable */
>> +#define REG0C_IMG_FLIP 0x80
>> +#define REG0C_IMG_MIRROR 0x40
>> +
>> +#define REG_REG0E 0x0E /* blc line */
>> +#define REG_HAEC 0x0F /* auto exposure cntrl */
>> +#define REG_AEC 0x10 /* auto exposure cntrl */
>> +
>> +#define REG_CLK 0x11 /* Clock control */
>> +#define REG_REG55 0x55 /* Clock PLL DIV/PreDiv */
>> +
>> +#define REG_REG12 0x12
>> +
>> +#define REG_REG13 0x13 /* auto/manual AGC, AEC, Write Balance*/
>> +#define REG13_AEC_EN 0x01
>> +#define REG13_AGC_EN 0x04
>> +
>> +#define REG_REG14 0x14
>> +#define REG_CTRL15 0x15
>> +#define REG15_GAIN_MSB 0x03
>> +
>> +#define REG_REG16 0x16
>> +
>> +#define REG_MIDH 0x1C /* manufacture id byte */
>> +#define REG_MIDL 0x1D /* manufacture id byre */
>> +#define REG_PIDH 0x0A /* Product ID MSB */
>> +#define REG_PIDL 0x0B /* Product ID LSB */
>> +
>> +#define REG_84 0x84 /* lots of stuff */
>> +#define REG_REG38 0x38 /* sub-addr */
>> +
>> +#define REG_AHSTART 0x17 /* Horiz start high bits */
>> +#define REG_AHSIZE 0x18
>> +#define REG_AVSTART 0x19 /* Vert start high bits */
>> +#define REG_AVSIZE 0x1A
>> +#define REG_PSHFT 0x1b /* Pixel delay after HREF */
>> +
>> +#define REG_HOUTSIZE 0x31
>> +#define REG_VOUTSIZE 0x32
>> +#define REG_HVSIZEOFF 0x33
>> +#define REG_REG34 0x34 /* DSP output size H/V LSB*/
>> +
>> +#define REG_ISP_CTRL00 0x80
>> +#define ISPCTRL00_AWB_EN 0x10
>> +#define ISPCTRL00_AWB_GAIN_EN 0x04
>> +
>> +#define REG_YGAIN 0xE2 /* ygain for contrast control */
>> +
>> +#define REG_YBRIGHT 0xE3
>> +#define REG_SGNSET 0xE4
>> +#define SGNSET_YBRIGHT_MASK 0x08
>> +
>> +#define REG_USAT 0xDD
>> +#define REG_VSAT 0xDE
>> +
>> +
>> +struct ov7740 {
>> + struct v4l2_subdev subdev;
>> +#if defined(CONFIG_MEDIA_CONTROLLER)
>> + struct media_pad pad;
>> +#endif
>> + struct v4l2_mbus_framefmt format;
>> + const struct ov7740_pixfmt *fmt; /* Current format */
>> + const struct ov7740_framesize *frmsize;
>> + struct regmap *regmap;
>> + struct clk *xvclk;
>> + struct v4l2_ctrl_handler ctrl_handler;
>> + struct {
>> + /* gain cluster */
>> + struct v4l2_ctrl *auto_gain;
>> + struct v4l2_ctrl *gain;
>> + };
>> + struct {
>> + struct v4l2_ctrl *auto_wb;
>> + struct v4l2_ctrl *blue_balance;
>> + struct v4l2_ctrl *red_balance;
>> + };
>> + struct {
>> + struct v4l2_ctrl *hflip;
>> + struct v4l2_ctrl *vflip;
>> + };
>> + struct {
>> + /* exposure cluster */
>> + struct v4l2_ctrl *auto_exposure;
>> + struct v4l2_ctrl *exposure;
>> + };
>> + struct {
>> + /* saturation/hue cluster */
>> + struct v4l2_ctrl *saturation;
>> + struct v4l2_ctrl *hue;
>> + };
>> + struct v4l2_ctrl *brightness;
>> + struct v4l2_ctrl *contrast;
>> +
>> + struct mutex mutex; /* To serialize asynchronus callbacks */
>> + bool streaming; /* Streaming on/off */
>> +
>> + struct gpio_desc *resetb_gpio;
>> + struct gpio_desc *pwdn_gpio;
>> +};
>> +
>> +struct ov7740_pixfmt {
>> + u32 mbus_code;
>> + enum v4l2_colorspace colorspace;
>> + const struct reg_sequence *regs;
>> + u32 reg_num;
>> +};
>> +
>> +struct ov7740_framesize {
>> + u16 width;
>> + u16 height;
>> + const struct reg_sequence *regs;
>> + u32 reg_num;
>> +};
>> +
>> +static const struct reg_sequence ov7740_vga[] = {
>> + {0x55, 0x40},
>> + {0x11, 0x02},
>> +
>> + {0xd5, 0x10},
>> + {0x0c, 0x12},
>> + {0x0d, 0x34},
>> + {0x17, 0x25},
>> + {0x18, 0xa0},
>> + {0x19, 0x03},
>> + {0x1a, 0xf0},
>> + {0x1b, 0x89},
>> + {0x22, 0x03},
>> + {0x29, 0x18},
>> + {0x2b, 0xf8},
>> + {0x2c, 0x01},
>> + {REG_HOUTSIZE, 0xa0},
>> + {REG_VOUTSIZE, 0xf0},
>> + {0x33, 0xc4},
>> + {REG_OUTSIZE_LSB, 0x0},
>> + {0x35, 0x05},
>> + {0x04, 0x60},
>> + {0x27, 0x80},
>> + {0x3d, 0x0f},
>> + {0x3e, 0x80},
>> + {0x3f, 0x40},
>> + {0x40, 0x7f},
>> + {0x41, 0x6a},
>> + {0x42, 0x29},
>> + {0x44, 0x22},
>> + {0x45, 0x41},
>> + {0x47, 0x02},
>> + {0x49, 0x64},
>> + {0x4a, 0xa1},
>> + {0x4b, 0x40},
>> + {0x4c, 0x1a},
>> + {0x4d, 0x50},
>> + {0x4e, 0x13},
>> + {0x64, 0x00},
>> + {0x67, 0x88},
>> + {0x68, 0x1a},
>> +
>> + {0x14, 0x28},
>> + {0x24, 0x3c},
>> + {0x25, 0x30},
>> + {0x26, 0x72},
>> + {0x50, 0x97},
>> + {0x51, 0x1f},
>> + {0x52, 0x00},
>> + {0x53, 0x00},
>> + {0x20, 0x00},
>> + {0x21, 0xcf},
>> + {0x50, 0x4b},
>> + {0x38, 0x14},
>> + {0xe9, 0x00},
>> + {0x56, 0x55},
>> + {0x57, 0xff},
>> + {0x58, 0xff},
>> + {0x59, 0xff},
>> + {0x5f, 0x04},
>> + {0xec, 0x00},
>> + {0x13, 0xff},
>> +
>> + {0x81, 0x3f},
>> + {0x82, 0x32},
>> + {0x38, 0x11},
>> + {0x84, 0x70},
>> + {0x85, 0x00},
>> + {0x86, 0x03},
>> + {0x87, 0x01},
>> + {0x88, 0x05},
>> + {0x89, 0x30},
>> + {0x8d, 0x30},
>> + {0x8f, 0x85},
>> + {0x93, 0x30},
>> + {0x95, 0x85},
>> + {0x99, 0x30},
>> + {0x9b, 0x85},
>> +
>> + {0x9c, 0x08},
>> + {0x9d, 0x12},
>> + {0x9e, 0x23},
>> + {0x9f, 0x45},
>> + {0xa0, 0x55},
>> + {0xa1, 0x64},
>> + {0xa2, 0x72},
>> + {0xa3, 0x7f},
>> + {0xa4, 0x8b},
>> + {0xa5, 0x95},
>> + {0xa6, 0xa7},
>> + {0xa7, 0xb5},
>> + {0xa8, 0xcb},
>> + {0xa9, 0xdd},
>> + {0xaa, 0xec},
>> + {0xab, 0x1a},
>> +
>> + {0xce, 0x78},
>> + {0xcf, 0x6e},
>> + {0xd0, 0x0a},
>> + {0xd1, 0x0c},
>> + {0xd2, 0x84},
>> + {0xd3, 0x90},
>> + {0xd4, 0x1e},
>> +
>> + {0x5a, 0x24},
>> + {0x5b, 0x1f},
>> + {0x5c, 0x88},
>> + {0x5d, 0x60},
>> +
>> + {0xac, 0x6e},
>> + {0xbe, 0xff},
>> + {0xbf, 0x00},
>> +
>> + {0x0f, 0x1d},
>> + {0x0f, 0x1f},
>> +};
>> +
>> +static const struct ov7740_framesize ov7740_framesizes[] = {
>> + {
>> + .width = VGA_WIDTH,
>> + .height = VGA_HEIGHT,
>> + .regs = ov7740_vga,
>> + .reg_num = ARRAY_SIZE(ov7740_vga),
>> + },
>> +};
>> +
>> +#ifdef CONFIG_VIDEO_ADV_DEBUG
>> +static int ov7740_get_register(struct v4l2_subdev *sd,
>> + struct v4l2_dbg_register *reg)
>> +{
>> + struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
>> + struct regmap *regmap = ov7740->regmap;
>> + unsigned int val = 0;
>> + int ret;
>> +
>> + ret = regmap_read(regmap, reg->reg & 0xff, &val);
>> + reg->val = val;
>> + reg->size = 1;
>> +
>> + return 0;
>> +}
>> +
>> +static int ov7740_set_register(struct v4l2_subdev *sd,
>> + const struct v4l2_dbg_register *reg)
>> +{
>> + struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
>> + struct regmap *regmap = ov7740->regmap;
>> +
>> + regmap_write(regmap, reg->reg & 0xff, reg->val & 0xff);
>> +
>> + return 0;
>> +}
>> +#endif
>> +
>> +static int ov7740_set_power(struct ov7740 *ov7740, int on)
>> +{
>> + int ret;
>> +
>> + if (on) {
>> + ret = clk_prepare_enable(ov7740->xvclk);
>> + if (ret)
>> + return ret;
>> +
>> + if (ov7740->pwdn_gpio)
>> + gpiod_direction_output(ov7740->pwdn_gpio, 0);
>> +
>> + if (ov7740->resetb_gpio) {
>> + gpiod_set_value(ov7740->resetb_gpio, 1);
>> + usleep_range(500, 1000);
>> + gpiod_set_value(ov7740->resetb_gpio, 0);
>> + usleep_range(3000, 5000);
>> + }
>> + } else {
>> + clk_disable_unprepare(ov7740->xvclk);
>> +
>> + if (ov7740->pwdn_gpio)
>> + gpiod_direction_output(ov7740->pwdn_gpio, 0);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static struct v4l2_subdev_core_ops ov7740_subdev_core_ops = {
>> + .log_status = v4l2_ctrl_subdev_log_status,
>> +#ifdef CONFIG_VIDEO_ADV_DEBUG
>> + .g_register = ov7740_get_register,
>> + .s_register = ov7740_set_register,
>> +#endif
>> + .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
>> + .unsubscribe_event = v4l2_event_subdev_unsubscribe,
>> +};
>> +
>> +static int ov7740_set_white_balance(struct ov7740 *ov7740, int awb)
>> +{
>> + struct regmap *regmap = ov7740->regmap;
>> + unsigned int value;
>> + int ret;
>> +
>> + ret = regmap_read(regmap, REG_ISP_CTRL00, &value);
>> + if (!ret) {
>> + if (awb)
>> + value |= (ISPCTRL00_AWB_EN | ISPCTRL00_AWB_GAIN_EN);
>> + else
>> + value &= ~(ISPCTRL00_AWB_EN | ISPCTRL00_AWB_GAIN_EN);
>> + ret = regmap_write(regmap, REG_ISP_CTRL00, value);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + if (!awb) {
>> + ret = regmap_write(regmap, REG_BGAIN,
>> + ov7740->blue_balance->val);
>> + if (ret)
>> + return ret;
>> +
>> + ret = regmap_write(regmap, REG_RGAIN, ov7740->red_balance->val);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int ov7740_set_saturation(struct regmap *regmap, int value)
>> +{
>> + int ret;
>> +
>> + ret = regmap_write(regmap, REG_USAT, (unsigned char)value);
>> + if (ret)
>> + return ret;
>> +
>> + return regmap_write(regmap, REG_VSAT, (unsigned char)value);
>> +}
>> +
>> +static int ov7740_set_gain(struct regmap *regmap, int value)
>> +{
>> + int ret;
>> +
>> + ret = regmap_write(regmap, REG_GAIN, value & 0xff);
>> + if (ret)
>> + return ret;
>> +
>> + ret = regmap_update_bits(regmap, REG_CTRL15,
>> + REG15_GAIN_MSB, (value >> 8) & 0x3);
>> + if (!ret)
>> + ret = regmap_update_bits(regmap, REG_REG13, REG13_AGC_EN, 0);
>> +
>> + return ret;
>> +}
>> +
>> +static int ov7740_set_autogain(struct regmap *regmap, int value)
>> +{
>> + unsigned int reg;
>> + int ret;
>> +
>> + ret = regmap_read(regmap, REG_REG13, ®);
>> + if (ret)
>> + return ret;
>> + if (value)
>> + reg |= REG13_AGC_EN;
>> + else
>> + reg &= ~REG13_AGC_EN;
>> + return regmap_write(regmap, REG_REG13, reg);
>> +}
>> +
>> +static int ov7740_set_brightness(struct regmap *regmap, int value)
>> +{
>> + /* Turn off AEC/AGC */
>> + regmap_update_bits(regmap, REG_REG13, REG13_AEC_EN, 0);
>> + regmap_update_bits(regmap, REG_REG13, REG13_AGC_EN, 0);
>> +
>> + if (value >= 0) {
>> + regmap_write(regmap, REG_YBRIGHT, (unsigned char)value);
>> + regmap_update_bits(regmap, REG_SGNSET, SGNSET_YBRIGHT_MASK, 0);
>> + } else{
>> + regmap_write(regmap, REG_YBRIGHT, (unsigned char)(-value));
>> + regmap_update_bits(regmap, REG_SGNSET, SGNSET_YBRIGHT_MASK, 1);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int ov7740_set_contrast(struct regmap *regmap, int value)
>> +{
>> + return regmap_write(regmap, REG_YGAIN, (unsigned char)value);
>> +}
>> +
>> +static int ov7740_get_gain(struct ov7740 *ov7740, struct v4l2_ctrl *ctrl)
>> +{
>> + struct regmap *regmap = ov7740->regmap;
>> + unsigned int value0, value1;
>> + int ret;
>> +
>> + if (!ctrl->val)
>> + return 0;
>> +
>> + ret = regmap_read(regmap, REG_GAIN, &value0);
>> + if (ret)
>> + return ret;
>> + ret = regmap_read(regmap, REG_CTRL15, &value1);
>> + if (ret)
>> + return ret;
>> +
>> + ov7740->gain->val = (value1 << 8) | (value0 & 0xff);
>> +
>> + return 0;
>> +}
>> +
>> +static int ov7740_set_exp(struct regmap *regmap, int value)
>> +{
>> + int ret;
>> +
>> + /* Turn off AEC/AGC */
>> + ret = regmap_update_bits(regmap, REG_REG13,
>> + REG13_AEC_EN | REG13_AGC_EN, 0);
>> + if (ret)
>> + return ret;
>> +
>> + ret = regmap_write(regmap, REG_AEC, (unsigned char)value);
>> + if (ret)
>> + return ret;
>> +
>> + return regmap_write(regmap, REG_HAEC, (unsigned char)(value >> 8));
>> +}
>> +
>> +static int ov7740_set_autoexp(struct regmap *regmap,
>> + enum v4l2_exposure_auto_type value)
>> +{
>> + unsigned int reg;
>> + int ret;
>> +
>> + ret = regmap_read(regmap, REG_REG13, ®);
>> + if (!ret) {
>> + if (value == V4L2_EXPOSURE_AUTO)
>> + reg |= (REG13_AEC_EN | REG13_AGC_EN);
>> + else
>> + reg &= ~(REG13_AEC_EN | REG13_AGC_EN);
>> + ret = regmap_write(regmap, REG_REG13, reg);
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +
>> +static int ov7740_get_volatile_ctrl(struct v4l2_ctrl *ctrl)
>> +{
>> + struct ov7740 *ov7740 = container_of(ctrl->handler,
>> + struct ov7740, ctrl_handler);
>> + int ret;
>> +
>> + switch (ctrl->id) {
>> + case V4L2_CID_AUTOGAIN:
>> + ret = ov7740_get_gain(ov7740, ctrl);
>> + break;
>> + default:
>> + ret = -EINVAL;
>> + break;
>> + }
>> + return ret;
>> +}
>> +
>> +static int ov7740_set_ctrl(struct v4l2_ctrl *ctrl)
>> +{
>> + struct ov7740 *ov7740 = container_of(ctrl->handler,
>> + struct ov7740, ctrl_handler);
>> + struct i2c_client *client = v4l2_get_subdevdata(&ov7740->subdev);
>> + struct regmap *regmap = ov7740->regmap;
>> + int ret;
>> + u8 val = 0;
>> +
>> + if (pm_runtime_get_if_in_use(&client->dev) <= 0)
>> + return 0;
>> +
>> + switch (ctrl->id) {
>> + case V4L2_CID_AUTO_WHITE_BALANCE:
>> + ret = ov7740_set_white_balance(ov7740, ctrl->val);
>> + break;
>> + case V4L2_CID_SATURATION:
>> + ret = ov7740_set_saturation(regmap, ctrl->val);
>> + break;
>> + case V4L2_CID_BRIGHTNESS:
>> + ret = ov7740_set_brightness(regmap, ctrl->val);
>> + break;
>> + case V4L2_CID_CONTRAST:
>> + ret = ov7740_set_contrast(regmap, ctrl->val);
>> + break;
>> + case V4L2_CID_VFLIP:
>> + ret = regmap_update_bits(regmap, REG_REG0C,
>> + REG0C_IMG_FLIP, val);
>> + break;
>> + case V4L2_CID_HFLIP:
>> + val = ctrl->val ? REG0C_IMG_MIRROR : 0x00;
>> + ret = regmap_update_bits(regmap, REG_REG0C,
>> + REG0C_IMG_MIRROR, val);
>> + break;
>> + case V4L2_CID_AUTOGAIN:
>> + if (!ctrl->val)
>> + return ov7740_set_gain(regmap, ov7740->gain->val);
>> +
>> + ret = ov7740_set_autogain(regmap, ctrl->val);
>> + break;
>> +
>> + case V4L2_CID_EXPOSURE_AUTO:
>> + if (ctrl->val == V4L2_EXPOSURE_MANUAL)
>> + return ov7740_set_exp(regmap, ov7740->exposure->val);
>> +
>> + ret = ov7740_set_autoexp(regmap, ctrl->val);
>> + break;
>> + default:
>> + ret = -EINVAL;
>> + break;
>> + }
>> +
>> + pm_runtime_put(&client->dev);
>> +
>> + return ret;
>> +}
>> +
>> +static const struct v4l2_ctrl_ops ov7740_ctrl_ops = {
>> + .g_volatile_ctrl = ov7740_get_volatile_ctrl,
>> + .s_ctrl = ov7740_set_ctrl,
>> +};
>> +
>> +static int ov7740_start_streaming(struct ov7740 *ov7740)
>> +{
>> + int ret;
>> +
>> + if (ov7740->fmt) {
>> + ret = regmap_multi_reg_write(ov7740->regmap,
>> + ov7740->fmt->regs,
>> + ov7740->fmt->reg_num);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + if (ov7740->frmsize) {
>> + ret = regmap_multi_reg_write(ov7740->regmap,
>> + ov7740->frmsize->regs,
>> + ov7740->frmsize->reg_num);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + return __v4l2_ctrl_handler_setup(ov7740->subdev.ctrl_handler);
>> +}
>> +
>> +static int ov7740_set_stream(struct v4l2_subdev *sd, int enable)
>> +{
>> + struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
>> + struct i2c_client *client = v4l2_get_subdevdata(sd);
>> + int ret = 0;
>> +
>> + mutex_lock(&ov7740->mutex);
>> + if (ov7740->streaming == enable) {
>> + mutex_unlock(&ov7740->mutex);
>> + return 0;
>> + }
>> +
>> + if (enable) {
>> + ret = pm_runtime_get_sync(&client->dev);
>> + if (ret < 0) {
>> + pm_runtime_put_noidle(&client->dev);
>> + goto err_unlock;
>> + }
>> +
>> + ret = ov7740_start_streaming(ov7740);
>> + if (ret)
>> + goto err_rpm_put;
>> + } else {
>> + pm_runtime_put(&client->dev);
>> + }
>> +
>> + ov7740->streaming = enable;
>> +
>> + mutex_unlock(&ov7740->mutex);
>> + return ret;
>> +
>> +err_rpm_put:
>> + pm_runtime_put(&client->dev);
>> +err_unlock:
>> + mutex_unlock(&ov7740->mutex);
>> + return ret;
>> +}
>> +
>> +static int ov7740_get_parm(struct v4l2_subdev *sd,
>> + struct v4l2_streamparm *parms)
>> +{
>> + struct v4l2_captureparm *cp = &parms->parm.capture;
>> + struct v4l2_fract *tpf = &cp->timeperframe;
>> +
>> + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
>> + return -EINVAL;
>> +
>> + memset(cp, 0, sizeof(struct v4l2_captureparm));
>> + cp->capability = V4L2_CAP_TIMEPERFRAME;
>> +
>> + tpf->numerator = 1;
>> + tpf->denominator = 60;
>> +
>> + return 0;
>> +}
>> +
>> +static int ov7740_set_parm(struct v4l2_subdev *sd,
>> + struct v4l2_streamparm *parms)
>> +{
>> + struct v4l2_captureparm *cp = &parms->parm.capture;
>> + struct v4l2_fract *tpf = &cp->timeperframe;
>> +
>> + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
>> + return -EINVAL;
>> + if (cp->extendedmode != 0)
>> + return -EINVAL;
>> +
>> + cp->capability = V4L2_CAP_TIMEPERFRAME;
>> +
>> + tpf->numerator = 1;
>> + tpf->denominator = 60;
>> +
>> + return 0;
>> +}
>> +
>> +static struct v4l2_subdev_video_ops ov7740_subdev_video_ops = {
>> + .s_stream = ov7740_set_stream,
>> + .s_parm = ov7740_set_parm,
>> + .g_parm = ov7740_get_parm,
>> +};
>> +
>> +static const struct reg_sequence ov7740_format_yuyv[] = {
>> + {0x12, 0x00},
>> + {0x36, 0x3f},
>> + {0x80, 0x7f},
>> + {0x83, 0x01},
>> +};
>> +
>> +static const struct reg_sequence ov7740_format_bggr8[] = {
>> + {0x36, 0x2f},
>> + {0x80, 0x01},
>> + {0x83, 0x04},
>> +};
>> +
>> +static const struct ov7740_pixfmt ov7740_formats[] = {
>> + {
>> + .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8,
>> + .colorspace = V4L2_COLORSPACE_SRGB,
>> + .regs = ov7740_format_yuyv,
>> + .reg_num = ARRAY_SIZE(ov7740_format_yuyv),
>> + },
>> + {
>> + .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8,
>> + .colorspace = V4L2_COLORSPACE_SRGB,
>> + .regs = ov7740_format_bggr8,
>> + .reg_num = ARRAY_SIZE(ov7740_format_bggr8),
>> + }
>> +};
>> +#define N_OV7740_FMTS ARRAY_SIZE(ov7740_formats)
>> +
>> +static int ov7740_enum_mbus_code(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_pad_config *cfg,
>> + struct v4l2_subdev_mbus_code_enum *code)
>> +{
>> + if (code->pad || code->index >= N_OV7740_FMTS)
>> + return -EINVAL;
>> +
>> + code->code = ov7740_formats[code->index].mbus_code;
>> +
>> + return 0;
>> +}
>> +
>> +static int ov7740_enum_frame_interval(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_pad_config *cfg,
>> + struct v4l2_subdev_frame_interval_enum *fie)
>> +{
>> + if (fie->pad)
>> + return -EINVAL;
>> +
>> + if (fie->index >= 1)
>> + return -EINVAL;
>> +
>> + if ((fie->width != VGA_WIDTH) || (fie->height != VGA_HEIGHT))
>> + return -EINVAL;
>> +
>> + fie->interval.numerator = 1;
>> + fie->interval.denominator = 60;
>> +
>> + return 0;
>> +}
>> +
>> +static int ov7740_enum_frame_size(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_pad_config *cfg,
>> + struct v4l2_subdev_frame_size_enum *fse)
>> +{
>> + if (fse->pad)
>> + return -EINVAL;
>> +
>> + if (fse->index > 0)
>> + return -EINVAL;
>> +
>> + fse->min_width = fse->max_width = VGA_WIDTH;
>> + fse->min_height = fse->max_height = VGA_HEIGHT;
>> +
>> + return 0;
>> +}
>> +
>> +static int ov7740_try_fmt_internal(struct v4l2_subdev *sd,
>> + struct v4l2_mbus_framefmt *fmt,
>> + const struct ov7740_pixfmt **ret_fmt,
>> + const struct ov7740_framesize **ret_frmsize)
>> +{
>> + struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
>> + const struct ov7740_framesize *fsize = &ov7740_framesizes[0];
>> + int index, i;
>> +
>> + for (index = 0; index < N_OV7740_FMTS; index++) {
>> + if (ov7740_formats[index].mbus_code == fmt->code)
>> + break;
>> + }
>> + if (index >= N_OV7740_FMTS) {
>> + /* default to first format */
>> + index = 0;
>> + fmt->code = ov7740_formats[0].mbus_code;
>> + }
>> + if (ret_fmt != NULL)
>> + *ret_fmt = ov7740_formats + index;
>> +
>> + for (i = 0; i < ARRAY_SIZE(ov7740_framesizes); i++) {
>> + if ((fsize->width >= fmt->width) &&
>> + (fsize->height >= fmt->height)) {
>> + fmt->width = fsize->width;
>> + fmt->height = fsize->height;
>> + break;
>> + }
>> +
>> + fsize++;
>> + }
>> +
>> + if (ret_frmsize != NULL)
>> + *ret_frmsize = fsize;
>> +
>> + fmt->field = V4L2_FIELD_NONE;
>> + fmt->colorspace = ov7740_formats[index].colorspace;
>> +
>> + ov7740->format = *fmt;
>> +
>> + return 0;
>> +}
>> +
>> +static int ov7740_set_fmt(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_pad_config *cfg,
>> + struct v4l2_subdev_format *format)
>> +{
>> + struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
>> + const struct ov7740_pixfmt *ovfmt;
>> + const struct ov7740_framesize *fsize;
>> +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
>> + struct v4l2_mbus_framefmt *mbus_fmt;
>> +#endif
>> + int ret;
>> +
>> + mutex_lock(&ov7740->mutex);
>> + if (format->pad) {
>> + ret = -EINVAL;
>> + goto error;
>> + }
>> +
>> + if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
>> + ret = ov7740_try_fmt_internal(sd, &format->format, NULL, NULL);
>> + if (ret)
>> + goto error;
>> +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
>> + mbus_fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
>> + *mbus_fmt = format->format;
>> +
>> + mutex_unlock(&ov7740->mutex);
>> + return 0;
>> +#else
>> + ret = -ENOTTY;
>> + goto error;
>> +#endif
>> + }
>> +
>> + ret = ov7740_try_fmt_internal(sd, &format->format, &ovfmt, &fsize);
>> + if (ret)
>> + goto error;
>> +
>> + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
>> + regmap_multi_reg_write(ov7740->regmap,
>> + ovfmt->regs, ovfmt->reg_num);
>> +
>> + regmap_multi_reg_write(ov7740->regmap,
>> + fsize->regs, fsize->reg_num);
>> + }
> Now that these registers are written at stream start, shouldn't you omit
> the writes here?
Yes, Agree.
>
> Further on, it would appear that the registers that contain the format
> configuration, also will contain the command to start streaming. If this is
> the case, shouldn't this be the last operation in the streaming start
> sequence?
Right.
>
>> +
>> + ov7740->fmt = ovfmt;
>> + ov7740->frmsize = fsize;
>> +
>> + mutex_unlock(&ov7740->mutex);
>> + return 0;
>> +
>> +error:
>> + mutex_unlock(&ov7740->mutex);
>> + return ret;
>> +}
>> +
>> +static int ov7740_get_fmt(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_pad_config *cfg,
>> + struct v4l2_subdev_format *format)
>> +{
>> + struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
>> +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
>> + struct v4l2_mbus_framefmt *mbus_fmt;
>> +#endif
>> + int ret = 0;
>> +
>> + mutex_lock(&ov7740->mutex);
>> + if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
>> +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
>> + mbus_fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
>> + format->format = *mbus_fmt;
>> + ret = 0;
>> +#else
>> + ret = -ENOTTY;
>> +#endif
>> + } else {
>> + format->format = ov7740->format;
>> + }
>> + mutex_unlock(&ov7740->mutex);
>> +
>> + return ret;
>> +}
>> +
>> +static const struct v4l2_subdev_pad_ops ov7740_subdev_pad_ops = {
>> + .enum_frame_interval = ov7740_enum_frame_interval,
>> + .enum_frame_size = ov7740_enum_frame_size,
>> + .enum_mbus_code = ov7740_enum_mbus_code,
>> + .get_fmt = ov7740_get_fmt,
>> + .set_fmt = ov7740_set_fmt,
>> +};
>> +
>> +static const struct v4l2_subdev_ops ov7740_subdev_ops = {
>> + .core = &ov7740_subdev_core_ops,
>> + .video = &ov7740_subdev_video_ops,
>> + .pad = &ov7740_subdev_pad_ops,
>> +};
>> +
>> +static void ov7740_get_default_format(struct v4l2_subdev *sd,
>> + struct v4l2_mbus_framefmt *format)
>> +{
>> + struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
>> +
>> + format->width = ov7740->frmsize->width;
>> + format->height = ov7740->frmsize->height;
>> + format->colorspace = ov7740->fmt->colorspace;
>> + format->code = ov7740->fmt->mbus_code;
>> + format->field = V4L2_FIELD_NONE;
>> +}
>> +
>> +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
>> +static int ov7740_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
>> +{
>> + struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
>> + struct v4l2_mbus_framefmt *format =
>> + v4l2_subdev_get_try_format(sd, fh->pad, 0);
>> +
>> + mutex_lock(&ov7740->mutex);
>> + ov7740_get_default_format(sd, format);
>> + mutex_unlock(&ov7740->mutex);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct v4l2_subdev_internal_ops ov7740_subdev_internal_ops = {
>> + .open = ov7740_open,
>> +};
>> +#endif
>> +
>> +static int ov7740_probe_dt(struct i2c_client *client,
>> + struct ov7740 *ov7740)
>> +{
>> + ov7740->resetb_gpio = devm_gpiod_get_optional(&client->dev, "reset",
>> + GPIOD_OUT_HIGH);
>> + if (IS_ERR(ov7740->resetb_gpio)) {
>> + dev_info(&client->dev, "can't get %s GPIO\n", "reset");
>> + return PTR_ERR(ov7740->resetb_gpio);
>> + }
>> +
>> + ov7740->pwdn_gpio = devm_gpiod_get_optional(&client->dev, "powerdown",
>> + GPIOD_OUT_LOW);
>> + if (IS_ERR(ov7740->pwdn_gpio)) {
>> + dev_info(&client->dev, "can't get %s GPIO\n", "powerdown");
>> + return PTR_ERR(ov7740->pwdn_gpio);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int ov7740_detect(struct ov7740 *ov7740)
>> +{
>> + struct regmap *regmap = ov7740->regmap;
>> + unsigned int midh, midl, pidh, pidl;
>> + int ret;
>> +
>> + ret = regmap_read(regmap, REG_MIDH, &midh);
>> + if (ret)
>> + return ret;
>> + if (midh != 0x7f)
>> + return -ENODEV;
>> +
>> + ret = regmap_read(regmap, REG_MIDL, &midl);
>> + if (ret)
>> + return ret;
>> + if (midl != 0xa2)
>> + return -ENODEV;
>> +
>> + ret = regmap_read(regmap, REG_PIDH, &pidh);
>> + if (ret)
>> + return ret;
>> + if (pidh != 0x77)
>> + return -ENODEV;
>> +
>> + ret = regmap_read(regmap, REG_PIDL, &pidl);
>> + if (ret)
>> + return ret;
>> + if ((pidl != 0x40) && (pidl != 0x41) && (pidl != 0x42))
>> + return -ENODEV;
>> +
>> + return 0;
>> +}
>> +
>> +static int ov7740_init_controls(struct ov7740 *ov7740)
>> +{
>> + struct i2c_client *client = v4l2_get_subdevdata(&ov7740->subdev);
>> + struct v4l2_ctrl_handler *ctrl_hdlr = &ov7740->ctrl_handler;
>> + int ret;
>> +
>> + ret = v4l2_ctrl_handler_init(ctrl_hdlr, 2);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ctrl_hdlr->lock = &ov7740->mutex;
>> + ov7740->auto_wb = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
>> + V4L2_CID_AUTO_WHITE_BALANCE,
>> + 0, 1, 1, 1);
>> + ov7740->blue_balance = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
>> + V4L2_CID_BLUE_BALANCE,
>> + 0, 0xff, 1, 0x80);
>> + ov7740->red_balance = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
>> + V4L2_CID_RED_BALANCE,
>> + 0, 0xff, 1, 0x80);
>> +
>> + ov7740->brightness = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
>> + V4L2_CID_BRIGHTNESS,
>> + -255, 255, 1, 0);
>> + ov7740->contrast = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
>> + V4L2_CID_CONTRAST,
>> + 0, 127, 1, 0x20);
>> + ov7740->saturation = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
>> + V4L2_CID_SATURATION, 0, 256, 1, 0x80);
>> + ov7740->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
>> + V4L2_CID_HFLIP, 0, 1, 1, 0);
>> + ov7740->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
>> + V4L2_CID_VFLIP, 0, 1, 1, 0);
>> + ov7740->gain = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
>> + V4L2_CID_GAIN, 0, 1023, 1, 500);
>> + ov7740->auto_gain = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
>> + V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
>> + ov7740->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
>> + V4L2_CID_EXPOSURE, 0, 65535, 1, 500);
>> + ov7740->auto_exposure = v4l2_ctrl_new_std_menu(ctrl_hdlr,
>> + &ov7740_ctrl_ops,
>> + V4L2_CID_EXPOSURE_AUTO,
>> + V4L2_EXPOSURE_MANUAL, 0,
>> + V4L2_EXPOSURE_AUTO);
>> +
>> + ov7740->gain->flags |= V4L2_CTRL_FLAG_VOLATILE;
>> + ov7740->exposure->flags |= V4L2_CTRL_FLAG_VOLATILE;
>> +
>> + v4l2_ctrl_auto_cluster(3, &ov7740->auto_wb, 0, false);
>> + v4l2_ctrl_auto_cluster(2, &ov7740->auto_gain, 0, true);
>> + v4l2_ctrl_auto_cluster(2, &ov7740->auto_exposure,
>> + V4L2_EXPOSURE_MANUAL, false);
>> + v4l2_ctrl_cluster(2, &ov7740->hflip);
>> +
>> + ret = v4l2_ctrl_handler_setup(ctrl_hdlr);
>> + if (ret) {
>> + dev_err(&client->dev, "%s control init failed (%d)\n",
>> + __func__, ret);
>> + goto error;
>> + }
>> +
>> + ov7740->subdev.ctrl_handler = ctrl_hdlr;
>> + return 0;
>> +
>> +error:
>> + v4l2_ctrl_handler_free(ctrl_hdlr);
>> + mutex_destroy(&ov7740->mutex);
>> + return ret;
>> +}
>> +
>> +static void ov7740_free_controls(struct ov7740 *ov7740)
>> +{
>> + v4l2_ctrl_handler_free(ov7740->subdev.ctrl_handler);
>> + mutex_destroy(&ov7740->mutex);
>> +}
>> +
>> +#define OV7740_MAX_REGISTER 0xff
>> +static const struct regmap_config ov7740_regmap_config = {
>> + .reg_bits = 8,
>> + .val_bits = 8,
>> + .max_register = OV7740_MAX_REGISTER,
>> +};
>> +
>> +static int ov7740_probe(struct i2c_client *client,
>> + const struct i2c_device_id *id)
>> +{
>> + struct ov7740 *ov7740;
>> + struct v4l2_subdev *sd;
>> + int ret;
>> +
>> + if (!i2c_check_functionality(client->adapter,
>> + I2C_FUNC_SMBUS_BYTE_DATA)) {
>> + dev_err(&client->dev,
>> + "OV7740: I2C-Adapter doesn't support SMBUS\n");
>> + return -EIO;
>> + }
>> +
>> + ov7740 = devm_kzalloc(&client->dev, sizeof(*ov7740), GFP_KERNEL);
>> + if (!ov7740)
>> + return -ENOMEM;
>> +
>> + ov7740->xvclk = devm_clk_get(&client->dev, "xvclk");
>> + if (IS_ERR(ov7740->xvclk)) {
>> + ret = PTR_ERR(ov7740->xvclk);
>> + dev_err(&client->dev,
>> + "OV7740: fail to get xvclk: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = ov7740_probe_dt(client, ov7740);
>> + if (ret)
>> + return ret;
>> +
>> + ov7740->regmap = devm_regmap_init_i2c(client, &ov7740_regmap_config);
>> + if (IS_ERR(ov7740->regmap)) {
>> + ret = PTR_ERR(ov7740->regmap);
>> + dev_err(&client->dev, "Failed to allocate register map: %d\n",
>> + ret);
>> + return ret;
>> + }
>> +
>> + sd = &ov7740->subdev;
>> + client->flags |= I2C_CLIENT_SCCB;
>> + v4l2_i2c_subdev_init(sd, client, &ov7740_subdev_ops);
>> +
>> +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
>> + sd->internal_ops = &ov7740_subdev_internal_ops;
>> + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
>> +#endif
>> +
>> +#if defined(CONFIG_MEDIA_CONTROLLER)
>> + ov7740->pad.flags = MEDIA_PAD_FL_SOURCE;
>> + sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
>> + ret = media_entity_pads_init(&sd->entity, 1, &ov7740->pad);
>> + if (ret)
>> + return ret;
>> +#endif
>> +
>> + ret = ov7740_set_power(ov7740, 1);
>> + if (ret)
>> + return ret;
>> +
>> + ret = ov7740_detect(ov7740);
>> + if (ret)
>> + goto error_detect;
>> +
>> + mutex_init(&ov7740->mutex);
>> +
>> + ret = ov7740_init_controls(ov7740);
>> + if (ret)
>> + goto error_init_controls;
>> +
>> + v4l_info(client, "chip found @ 0x%02x (%s)\n",
>> + client->addr << 1, client->adapter->name);
>> +
>> + ov7740->fmt = &ov7740_formats[0];
>> + ov7740->frmsize = &ov7740_framesizes[0];
>> +
>> + ov7740_get_default_format(sd, &ov7740->format);
>> +
>> + ret = v4l2_async_register_subdev(sd);
>> + if (ret)
>> + goto error_async_register;
>> +
>> + pm_runtime_set_active(&client->dev);
>> + pm_runtime_enable(&client->dev);
>> + pm_runtime_idle(&client->dev);
>> +
>> + return 0;
>> +
>> +error_async_register:
>> + v4l2_ctrl_handler_free(ov7740->subdev.ctrl_handler);
>> +error_init_controls:
>> + ov7740_free_controls(ov7740);
>> +error_detect:
>> + ov7740_set_power(ov7740, 0);
>> + media_entity_cleanup(&ov7740->subdev.entity);
>> +
>> + return ret;
>> +}
>> +
>> +static int ov7740_remove(struct i2c_client *client)
>> +{
>> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
>> + struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
>> +
>> + mutex_destroy(&ov7740->mutex);
>> + v4l2_ctrl_handler_free(ov7740->subdev.ctrl_handler);
>> +#if defined(CONFIG_MEDIA_CONTROLLER)
>> + media_entity_cleanup(&ov7740->subdev.entity);
>> +#endif
>> + v4l2_async_unregister_subdev(sd);
>> + ov7740_free_controls(ov7740);
>> +
>> + pm_runtime_get_sync(&client->dev);
>> + pm_runtime_disable(&client->dev);
>> + pm_runtime_set_suspended(&client->dev);
>> + pm_runtime_put_noidle(&client->dev);
>> +
>> + ov7740_set_power(ov7740, 0);
>> + return 0;
>> +}
>> +
>> +static int __maybe_unused ov7740_runtime_suspend(struct device *dev)
>> +{
>> + struct i2c_client *client = to_i2c_client(dev);
>> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
>> + struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
>> +
>> + ov7740_set_power(ov7740, 0);
>> +
>> + return 0;
>> +}
>> +
>> +static int __maybe_unused ov7740_runtime_resume(struct device *dev)
>> +{
>> + struct i2c_client *client = to_i2c_client(dev);
>> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
>> + struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
>> +
>> + return ov7740_set_power(ov7740, 1);
>> +}
>> +
>> +static const struct i2c_device_id ov7740_id[] = {
>> + { "ov7740", 0 },
>> + { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(i2c, ov7740_id);
>> +
>> +static const struct dev_pm_ops ov7740_pm_ops = {
>> + SET_RUNTIME_PM_OPS(ov7740_runtime_suspend, ov7740_runtime_resume, NULL)
>> +};
>> +
>> +static const struct of_device_id ov7740_of_match[] = {
>> + {.compatible = "ovti,ov7740", },
>> + { /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, ov7740_of_match);
>> +
>> +static struct i2c_driver ov7740_i2c_driver = {
>> + .driver = {
>> + .name = "ov7740",
>> + .pm = &ov7740_pm_ops,
>> + .of_match_table = of_match_ptr(ov7740_of_match),
>> + },
>> + .probe = ov7740_probe,
>> + .remove = ov7740_remove,
>> + .id_table = ov7740_id,
>> +};
>> +module_i2c_driver(ov7740_i2c_driver);
>> +
>> +MODULE_DESCRIPTION("The V4L2 driver for Omnivision 7740 sensor");
>> +MODULE_AUTHOR("Songjun Wu <songjun.wu@atmel.com>");
>> +MODULE_LICENSE("GPL v2");
>> --
>> 2.15.0
>>
Best Regards,
Weyou Yang
^ permalink raw reply
* [PATCH v4 0/2] dt: add pinctrl driver for Meson-AXG SoC
From: Yixun Lan @ 2017-12-08 1:54 UTC (permalink / raw)
To: Kevin Hilman, linux-amlogic
Cc: Rob Herring, Mark Rutland, Linus Walleij, Neil Armstrong,
Jerome Brunet, Carlo Caione, Yixun Lan, Xingyu Chen, devicetree,
linux-gpio, linux-arm-kernel, linux-kernel
This is DT part patchset for adding pinctrl support for
the Amlogic's Meson-AXG SoC.
Changes since v3 at [3]
-- rebase to khilman's v4.16/dt64 branch and re-send
-- add Rob's Ack
Changes since v2 at [2]:
-- Resend this patch series due to fail to send patch [2/2]
Changes since v1 at [1]:
-- Separate DT part patches
-- Add Neil Armstrong's Ack
[3]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005392.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005393.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005394.html
[2]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005390.html
[1]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005270.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005271.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005272.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005273.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005274.html
Xingyu Chen (2):
documentation: Add compatibles for Amlogic Meson AXG pin controllers
ARM64: dts: meson-axg: add pinctrl DT info for Meson-AXG SoC
.../devicetree/bindings/pinctrl/meson,pinctrl.txt | 2 +
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 44 ++++++++++++++++++++++
2 files changed, 46 insertions(+)
--
2.15.1
^ permalink raw reply
* [PATCH v4 1/2] documentation: Add compatibles for Amlogic Meson AXG pin controllers
From: Yixun Lan @ 2017-12-08 1:54 UTC (permalink / raw)
To: Kevin Hilman, linux-amlogic
Cc: Rob Herring, Mark Rutland, Linus Walleij, Neil Armstrong,
Jerome Brunet, Carlo Caione, Yixun Lan, Xingyu Chen, devicetree,
linux-gpio, linux-arm-kernel, linux-kernel
In-Reply-To: <20171208015418.9632-1-yixun.lan@amlogic.com>
From: Xingyu Chen <xingyu.chen@amlogic.com>
Add compatibles for Amlogic Meson AXG pin controllers
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Rob Herring <robh at kernel.org>
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
index 2392557ede27..2c12f9789116 100644
--- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
@@ -9,6 +9,8 @@ Required properties for the root node:
"amlogic,meson-gxbb-aobus-pinctrl"
"amlogic,meson-gxl-periphs-pinctrl"
"amlogic,meson-gxl-aobus-pinctrl"
+ "amlogic,meson-axg-periphs-pinctrl"
+ "amlogic,meson-axg-aobus-pinctrl"
- reg: address and size of registers controlling irq functionality
=== GPIO sub-nodes ===
--
2.15.1
^ permalink raw reply related
* [PATCH v4 2/2] ARM64: dts: meson-axg: add pinctrl DT info for Meson-AXG SoC
From: Yixun Lan @ 2017-12-08 1:54 UTC (permalink / raw)
To: Kevin Hilman, linux-amlogic
Cc: Rob Herring, Mark Rutland, Linus Walleij, Neil Armstrong,
Jerome Brunet, Carlo Caione, Yixun Lan, Xingyu Chen, devicetree,
linux-gpio, linux-arm-kernel, linux-kernel
In-Reply-To: <20171208015418.9632-1-yixun.lan@amlogic.com>
From: Xingyu Chen <xingyu.chen@amlogic.com>
Add new pinctrl DT info for the Amlogic's Meson-AXG SoC.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 44 ++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index e7213eb53958..7b24f83ab4bf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/meson-axg-gpio.h>
/ {
compatible = "amlogic,meson-axg";
@@ -157,6 +158,32 @@
#mbox-cells = <1>;
};
+ periphs: periphs@ff634000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff634000 0x0 0x2000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
+
+ pinctrl_periphs: pinctrl@480 {
+ compatible = "amlogic,meson-axg-periphs-pinctrl";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio: bank@480 {
+ reg = <0x0 0x00480 0x0 0x40>,
+ <0x0 0x004e8 0x0 0x14>,
+ <0x0 0x00520 0x0 0x14>,
+ <0x0 0x00430 0x0 0x3c>;
+ reg-names = "mux", "pull", "pull-enable", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_periphs 0 0 86>;
+ };
+ };
+ };
+
sram: sram@fffc0000 {
compatible = "amlogic,meson-axg-sram", "mmio-sram";
reg = <0x0 0xfffc0000 0x0 0x20000>;
@@ -182,6 +209,23 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
+ pinctrl_aobus: pinctrl@14 {
+ compatible = "amlogic,meson-axg-aobus-pinctrl";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio_ao: bank@14 {
+ reg = <0x0 0x00014 0x0 0x8>,
+ <0x0 0x0002c 0x0 0x4>,
+ <0x0 0x00024 0x0 0x8>;
+ reg-names = "mux", "pull", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_aobus 0 0 15>;
+ };
+ };
+
uart_AO: serial@3000 {
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
reg = <0x0 0x3000 0x0 0x18>;
--
2.15.1
^ permalink raw reply related
* [PATCH v8 0/2] media: ov7740: Add a V4L2 sensor-level driver
From: Wenyou Yang @ 2017-12-08 1:55 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Mark Rutland
Cc: linux-kernel, Nicolas Ferre, devicetree, Sakari Ailus,
Jonathan Corbet, Hans Verkuil, linux-arm-kernel,
Linux Media Mailing List, Wenyou Yang
Add a Video4Linux2 sensor-level driver for the OmniVision OV7740
VGA camera image sensor.
Changes in v8:
- As the registers are written at stream start, remove the written
code from the set fmt function.
Changes in v7:
- Add Acked-by tag.
- Fix the wrong handle of default register configuration.
- Add the missed assignment of ov7740->frmsize.
Changes in v6:
- Remove unnecessary #include <linux/init>.
- Remove unnecessary comments and extra newline.
- Add const for some structures.
- Add the check of the return value from regmap_write().
- Simplify the calling of __v4l2_ctrl_handler_setup().
- Add the default format initialization function.
- Integrate the set_power() and enable/disable the clock into
one function.
Changes in v5:
- Squash the driver and MAINTAINERS entry patches to one.
- Precede the driver patch with the bindings patch.
Changes in v4:
- Assign 'val' a initial value to avoid warning: 'val' may be
used uninitialized.
- Rename REG_REG15 to avoid warning: "REG_REG15" redefined.
Changes in v3:
- Explicitly document the "remote-endpoint" property.
- Put the MAINTAINERS change to a separate patch.
Changes in v2:
- Split off the bindings into a separate patch.
- Add a new entry to the MAINTAINERS file.
Wenyou Yang (2):
media: ov7740: Document device tree bindings
media: i2c: Add the ov7740 image sensor driver
.../devicetree/bindings/media/i2c/ov7740.txt | 47 +
MAINTAINERS | 8 +
drivers/media/i2c/Kconfig | 8 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/ov7740.c | 1226 ++++++++++++++++++++
5 files changed, 1290 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov7740.txt
create mode 100644 drivers/media/i2c/ov7740.c
--
2.15.0
^ permalink raw reply
* [PATCH v8 1/2] media: ov7740: Document device tree bindings
From: Wenyou Yang @ 2017-12-08 1:55 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Mark Rutland
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA, Nicolas Ferre,
devicetree-u79uwXL29TY76Z2rM5mHXA, Sakari Ailus, Jonathan Corbet,
Hans Verkuil, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux Media Mailing List, Wenyou Yang
In-Reply-To: <20171208015542.15444-1-wenyou.yang-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org>
Add the device tree binding documentation for the ov7740 sensor driver.
Signed-off-by: Wenyou Yang <wenyou.yang-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
Changes in v8: None
Changes in v7:
- Add Acked-by tag.
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- Explicitly document the "remote-endpoint" property.
Changes in v2: None
.../devicetree/bindings/media/i2c/ov7740.txt | 47 ++++++++++++++++++++++
1 file changed, 47 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov7740.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/ov7740.txt b/Documentation/devicetree/bindings/media/i2c/ov7740.txt
new file mode 100644
index 000000000000..af781c3a5f0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov7740.txt
@@ -0,0 +1,47 @@
+* Omnivision OV7740 CMOS image sensor
+
+The Omnivision OV7740 image sensor supports multiple output image
+size, such as VGA, and QVGA, CIF and any size smaller. It also
+supports the RAW RGB and YUV output formats.
+
+The common video interfaces bindings (see video-interfaces.txt) should
+be used to specify link to the image data receiver. The OV7740 device
+node should contain one 'port' child node with an 'endpoint' subnode.
+
+Required Properties:
+- compatible: "ovti,ov7740".
+- reg: I2C slave address of the sensor.
+- clocks: Reference to the xvclk input clock.
+- clock-names: "xvclk".
+
+Optional Properties:
+- reset-gpios: Rreference to the GPIO connected to the reset_b pin,
+ if any. Active low with pull-ip resistor.
+- powerdown-gpios: Reference to the GPIO connected to the pwdn pin,
+ if any. Active high with pull-down resistor.
+
+Endpoint node mandatory properties:
+- remote-endpoint: A phandle to the bus receiver's endpoint node.
+
+Example:
+
+ i2c1: i2c@fc028000 {
+ ov7740: camera@21 {
+ compatible = "ovti,ov7740";
+ reg = <0x21>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sensor_power &pinctrl_sensor_reset>;
+ clocks = <&isc>;
+ clock-names = "xvclk";
+ assigned-clocks = <&isc>;
+ assigned-clock-rates = <24000000>;
+ reset-gpios = <&pioA 43 GPIO_ACTIVE_LOW>;
+ powerdown-gpios = <&pioA 44 GPIO_ACTIVE_HIGH>;
+
+ port {
+ ov7740_0: endpoint {
+ remote-endpoint = <&isc_0>;
+ };
+ };
+ };
+ };
--
2.15.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v8 2/2] media: i2c: Add the ov7740 image sensor driver
From: Wenyou Yang @ 2017-12-08 1:55 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Mark Rutland
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA, Nicolas Ferre,
devicetree-u79uwXL29TY76Z2rM5mHXA, Sakari Ailus, Jonathan Corbet,
Hans Verkuil, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Linux Media Mailing List, Wenyou Yang, Songjun Wu
In-Reply-To: <20171208015542.15444-1-wenyou.yang-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org>
The ov7740 (color) image sensor is a high performance VGA CMOS
image snesor, which supports for output formats: RAW RGB and YUV
and image sizes: VGA, and QVGA, CIF and any size smaller.
Signed-off-by: Songjun Wu <songjun.wu-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org>
Signed-off-by: Wenyou Yang <wenyou.yang-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org>
---
Changes in v8:
- As the registers are written at stream start, remove the written
code from the set fmt function.
Changes in v7:
- Fix the wrong handle of default register configuration.
- Add the missed assignment of ov7740->frmsize.
Changes in v6:
- Remove unnecessary #include <linux/init>.
- Remove unnecessary comments and extra newline.
- Add const for some structures.
- Add the check of the return value from regmap_write().
- Simplify the calling of __v4l2_ctrl_handler_setup().
- Add the default format initialization function.
- Integrate the set_power() and enable/disable the clock into
one function.
Changes in v5:
- Squash the driver and MAINTAINERS entry patches to one.
- Precede the driver patch with the bindings patch.
Changes in v4:
- Assign 'val' a initial value to avoid warning: 'val' may be
used uninitialized.
- Rename REG_REG15 to avoid warning: "REG_REG15" redefined.
Changes in v3:
- Put the MAINTAINERS change to a separate patch.
Changes in v2:
- Split off the bindings into a separate patch.
- Add a new entry to the MAINTAINERS file.
MAINTAINERS | 8 +
drivers/media/i2c/Kconfig | 8 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/ov7740.c | 1226 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 1243 insertions(+)
create mode 100644 drivers/media/i2c/ov7740.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 7a52a66aa991..1de965009b13 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10053,6 +10053,14 @@ S: Maintained
F: drivers/media/i2c/ov7670.c
F: Documentation/devicetree/bindings/media/i2c/ov7670.txt
+OMNIVISION OV7740 SENSOR DRIVER
+M: Wenyou Yang <wenyou.yang-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org>
+L: linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
+T: git git://linuxtv.org/media_tree.git
+S: Maintained
+F: drivers/media/i2c/ov7740.c
+F: Documentation/devicetree/bindings/media/i2c/ov7740.txt
+
ONENAND FLASH DRIVER
M: Kyungmin Park <kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
L: linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index cb5d7ff82915..00b1c4c031d4 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -665,6 +665,14 @@ config VIDEO_OV7670
OV7670 VGA camera. It currently only works with the M88ALP01
controller.
+config VIDEO_OV7740
+ tristate "OmniVision OV7740 sensor support"
+ depends on I2C && VIDEO_V4L2
+ depends on MEDIA_CAMERA_SUPPORT
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the OmniVision
+ OV7740 VGA camera sensor.
+
config VIDEO_OV9650
tristate "OmniVision OV9650/OV9652 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 548a9efce966..9b19ec7fcaf4 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -68,6 +68,7 @@ obj-$(CONFIG_VIDEO_OV5670) += ov5670.o
obj-$(CONFIG_VIDEO_OV6650) += ov6650.o
obj-$(CONFIG_VIDEO_OV7640) += ov7640.o
obj-$(CONFIG_VIDEO_OV7670) += ov7670.o
+obj-$(CONFIG_VIDEO_OV7740) += ov7740.o
obj-$(CONFIG_VIDEO_OV9650) += ov9650.o
obj-$(CONFIG_VIDEO_OV13858) += ov13858.o
obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o
diff --git a/drivers/media/i2c/ov7740.c b/drivers/media/i2c/ov7740.c
new file mode 100644
index 000000000000..536971e8ce8b
--- /dev/null
+++ b/drivers/media/i2c/ov7740.c
@@ -0,0 +1,1226 @@
+/*
+ * Copyright (c) 2017 Microchip Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-image-sizes.h>
+#include <media/v4l2-subdev.h>
+
+#define REG_OUTSIZE_LSB 0x34
+
+/* OV7740 register tables */
+#define REG_GAIN 0x00 /* Gain lower 8 bits (rest in vref) */
+#define REG_BGAIN 0x01 /* blue gain */
+#define REG_RGAIN 0x02 /* red gain */
+#define REG_GGAIN 0x03 /* green gain */
+#define REG_REG04 0x04 /* analog setting, dont change*/
+#define REG_BAVG 0x05 /* b channel average */
+#define REG_GAVG 0x06 /* g channel average */
+#define REG_RAVG 0x07 /* r channel average */
+
+#define REG_REG0C 0x0C /* filp enable */
+#define REG0C_IMG_FLIP 0x80
+#define REG0C_IMG_MIRROR 0x40
+
+#define REG_REG0E 0x0E /* blc line */
+#define REG_HAEC 0x0F /* auto exposure cntrl */
+#define REG_AEC 0x10 /* auto exposure cntrl */
+
+#define REG_CLK 0x11 /* Clock control */
+#define REG_REG55 0x55 /* Clock PLL DIV/PreDiv */
+
+#define REG_REG12 0x12
+
+#define REG_REG13 0x13 /* auto/manual AGC, AEC, Write Balance*/
+#define REG13_AEC_EN 0x01
+#define REG13_AGC_EN 0x04
+
+#define REG_REG14 0x14
+#define REG_CTRL15 0x15
+#define REG15_GAIN_MSB 0x03
+
+#define REG_REG16 0x16
+
+#define REG_MIDH 0x1C /* manufacture id byte */
+#define REG_MIDL 0x1D /* manufacture id byre */
+#define REG_PIDH 0x0A /* Product ID MSB */
+#define REG_PIDL 0x0B /* Product ID LSB */
+
+#define REG_84 0x84 /* lots of stuff */
+#define REG_REG38 0x38 /* sub-addr */
+
+#define REG_AHSTART 0x17 /* Horiz start high bits */
+#define REG_AHSIZE 0x18
+#define REG_AVSTART 0x19 /* Vert start high bits */
+#define REG_AVSIZE 0x1A
+#define REG_PSHFT 0x1b /* Pixel delay after HREF */
+
+#define REG_HOUTSIZE 0x31
+#define REG_VOUTSIZE 0x32
+#define REG_HVSIZEOFF 0x33
+#define REG_REG34 0x34 /* DSP output size H/V LSB*/
+
+#define REG_ISP_CTRL00 0x80
+#define ISPCTRL00_AWB_EN 0x10
+#define ISPCTRL00_AWB_GAIN_EN 0x04
+
+#define REG_YGAIN 0xE2 /* ygain for contrast control */
+
+#define REG_YBRIGHT 0xE3
+#define REG_SGNSET 0xE4
+#define SGNSET_YBRIGHT_MASK 0x08
+
+#define REG_USAT 0xDD
+#define REG_VSAT 0xDE
+
+
+struct ov7740 {
+ struct v4l2_subdev subdev;
+#if defined(CONFIG_MEDIA_CONTROLLER)
+ struct media_pad pad;
+#endif
+ struct v4l2_mbus_framefmt format;
+ const struct ov7740_pixfmt *fmt; /* Current format */
+ const struct ov7740_framesize *frmsize;
+ struct regmap *regmap;
+ struct clk *xvclk;
+ struct v4l2_ctrl_handler ctrl_handler;
+ struct {
+ /* gain cluster */
+ struct v4l2_ctrl *auto_gain;
+ struct v4l2_ctrl *gain;
+ };
+ struct {
+ struct v4l2_ctrl *auto_wb;
+ struct v4l2_ctrl *blue_balance;
+ struct v4l2_ctrl *red_balance;
+ };
+ struct {
+ struct v4l2_ctrl *hflip;
+ struct v4l2_ctrl *vflip;
+ };
+ struct {
+ /* exposure cluster */
+ struct v4l2_ctrl *auto_exposure;
+ struct v4l2_ctrl *exposure;
+ };
+ struct {
+ /* saturation/hue cluster */
+ struct v4l2_ctrl *saturation;
+ struct v4l2_ctrl *hue;
+ };
+ struct v4l2_ctrl *brightness;
+ struct v4l2_ctrl *contrast;
+
+ struct mutex mutex; /* To serialize asynchronus callbacks */
+ bool streaming; /* Streaming on/off */
+
+ struct gpio_desc *resetb_gpio;
+ struct gpio_desc *pwdn_gpio;
+};
+
+struct ov7740_pixfmt {
+ u32 mbus_code;
+ enum v4l2_colorspace colorspace;
+ const struct reg_sequence *regs;
+ u32 reg_num;
+};
+
+struct ov7740_framesize {
+ u16 width;
+ u16 height;
+ const struct reg_sequence *regs;
+ u32 reg_num;
+};
+
+static const struct reg_sequence ov7740_vga[] = {
+ {0x55, 0x40},
+ {0x11, 0x02},
+
+ {0xd5, 0x10},
+ {0x0c, 0x12},
+ {0x0d, 0x34},
+ {0x17, 0x25},
+ {0x18, 0xa0},
+ {0x19, 0x03},
+ {0x1a, 0xf0},
+ {0x1b, 0x89},
+ {0x22, 0x03},
+ {0x29, 0x18},
+ {0x2b, 0xf8},
+ {0x2c, 0x01},
+ {REG_HOUTSIZE, 0xa0},
+ {REG_VOUTSIZE, 0xf0},
+ {0x33, 0xc4},
+ {REG_OUTSIZE_LSB, 0x0},
+ {0x35, 0x05},
+ {0x04, 0x60},
+ {0x27, 0x80},
+ {0x3d, 0x0f},
+ {0x3e, 0x80},
+ {0x3f, 0x40},
+ {0x40, 0x7f},
+ {0x41, 0x6a},
+ {0x42, 0x29},
+ {0x44, 0x22},
+ {0x45, 0x41},
+ {0x47, 0x02},
+ {0x49, 0x64},
+ {0x4a, 0xa1},
+ {0x4b, 0x40},
+ {0x4c, 0x1a},
+ {0x4d, 0x50},
+ {0x4e, 0x13},
+ {0x64, 0x00},
+ {0x67, 0x88},
+ {0x68, 0x1a},
+
+ {0x14, 0x28},
+ {0x24, 0x3c},
+ {0x25, 0x30},
+ {0x26, 0x72},
+ {0x50, 0x97},
+ {0x51, 0x1f},
+ {0x52, 0x00},
+ {0x53, 0x00},
+ {0x20, 0x00},
+ {0x21, 0xcf},
+ {0x50, 0x4b},
+ {0x38, 0x14},
+ {0xe9, 0x00},
+ {0x56, 0x55},
+ {0x57, 0xff},
+ {0x58, 0xff},
+ {0x59, 0xff},
+ {0x5f, 0x04},
+ {0xec, 0x00},
+ {0x13, 0xff},
+
+ {0x81, 0x3f},
+ {0x82, 0x32},
+ {0x38, 0x11},
+ {0x84, 0x70},
+ {0x85, 0x00},
+ {0x86, 0x03},
+ {0x87, 0x01},
+ {0x88, 0x05},
+ {0x89, 0x30},
+ {0x8d, 0x30},
+ {0x8f, 0x85},
+ {0x93, 0x30},
+ {0x95, 0x85},
+ {0x99, 0x30},
+ {0x9b, 0x85},
+
+ {0x9c, 0x08},
+ {0x9d, 0x12},
+ {0x9e, 0x23},
+ {0x9f, 0x45},
+ {0xa0, 0x55},
+ {0xa1, 0x64},
+ {0xa2, 0x72},
+ {0xa3, 0x7f},
+ {0xa4, 0x8b},
+ {0xa5, 0x95},
+ {0xa6, 0xa7},
+ {0xa7, 0xb5},
+ {0xa8, 0xcb},
+ {0xa9, 0xdd},
+ {0xaa, 0xec},
+ {0xab, 0x1a},
+
+ {0xce, 0x78},
+ {0xcf, 0x6e},
+ {0xd0, 0x0a},
+ {0xd1, 0x0c},
+ {0xd2, 0x84},
+ {0xd3, 0x90},
+ {0xd4, 0x1e},
+
+ {0x5a, 0x24},
+ {0x5b, 0x1f},
+ {0x5c, 0x88},
+ {0x5d, 0x60},
+
+ {0xac, 0x6e},
+ {0xbe, 0xff},
+ {0xbf, 0x00},
+
+ {0x0f, 0x1d},
+ {0x0f, 0x1f},
+};
+
+static const struct ov7740_framesize ov7740_framesizes[] = {
+ {
+ .width = VGA_WIDTH,
+ .height = VGA_HEIGHT,
+ .regs = ov7740_vga,
+ .reg_num = ARRAY_SIZE(ov7740_vga),
+ },
+};
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int ov7740_get_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+ struct regmap *regmap = ov7740->regmap;
+ unsigned int val = 0;
+ int ret;
+
+ ret = regmap_read(regmap, reg->reg & 0xff, &val);
+ reg->val = val;
+ reg->size = 1;
+
+ return 0;
+}
+
+static int ov7740_set_register(struct v4l2_subdev *sd,
+ const struct v4l2_dbg_register *reg)
+{
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+ struct regmap *regmap = ov7740->regmap;
+
+ regmap_write(regmap, reg->reg & 0xff, reg->val & 0xff);
+
+ return 0;
+}
+#endif
+
+static int ov7740_set_power(struct ov7740 *ov7740, int on)
+{
+ int ret;
+
+ if (on) {
+ ret = clk_prepare_enable(ov7740->xvclk);
+ if (ret)
+ return ret;
+
+ if (ov7740->pwdn_gpio)
+ gpiod_direction_output(ov7740->pwdn_gpio, 0);
+
+ if (ov7740->resetb_gpio) {
+ gpiod_set_value(ov7740->resetb_gpio, 1);
+ usleep_range(500, 1000);
+ gpiod_set_value(ov7740->resetb_gpio, 0);
+ usleep_range(3000, 5000);
+ }
+ } else {
+ clk_disable_unprepare(ov7740->xvclk);
+
+ if (ov7740->pwdn_gpio)
+ gpiod_direction_output(ov7740->pwdn_gpio, 0);
+ }
+
+ return 0;
+}
+
+static struct v4l2_subdev_core_ops ov7740_subdev_core_ops = {
+ .log_status = v4l2_ctrl_subdev_log_status,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = ov7740_get_register,
+ .s_register = ov7740_set_register,
+#endif
+ .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
+ .unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+
+static int ov7740_set_white_balance(struct ov7740 *ov7740, int awb)
+{
+ struct regmap *regmap = ov7740->regmap;
+ unsigned int value;
+ int ret;
+
+ ret = regmap_read(regmap, REG_ISP_CTRL00, &value);
+ if (!ret) {
+ if (awb)
+ value |= (ISPCTRL00_AWB_EN | ISPCTRL00_AWB_GAIN_EN);
+ else
+ value &= ~(ISPCTRL00_AWB_EN | ISPCTRL00_AWB_GAIN_EN);
+ ret = regmap_write(regmap, REG_ISP_CTRL00, value);
+ if (ret)
+ return ret;
+ }
+
+ if (!awb) {
+ ret = regmap_write(regmap, REG_BGAIN,
+ ov7740->blue_balance->val);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(regmap, REG_RGAIN, ov7740->red_balance->val);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ov7740_set_saturation(struct regmap *regmap, int value)
+{
+ int ret;
+
+ ret = regmap_write(regmap, REG_USAT, (unsigned char)value);
+ if (ret)
+ return ret;
+
+ return regmap_write(regmap, REG_VSAT, (unsigned char)value);
+}
+
+static int ov7740_set_gain(struct regmap *regmap, int value)
+{
+ int ret;
+
+ ret = regmap_write(regmap, REG_GAIN, value & 0xff);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(regmap, REG_CTRL15,
+ REG15_GAIN_MSB, (value >> 8) & 0x3);
+ if (!ret)
+ ret = regmap_update_bits(regmap, REG_REG13, REG13_AGC_EN, 0);
+
+ return ret;
+}
+
+static int ov7740_set_autogain(struct regmap *regmap, int value)
+{
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_read(regmap, REG_REG13, ®);
+ if (ret)
+ return ret;
+ if (value)
+ reg |= REG13_AGC_EN;
+ else
+ reg &= ~REG13_AGC_EN;
+ return regmap_write(regmap, REG_REG13, reg);
+}
+
+static int ov7740_set_brightness(struct regmap *regmap, int value)
+{
+ /* Turn off AEC/AGC */
+ regmap_update_bits(regmap, REG_REG13, REG13_AEC_EN, 0);
+ regmap_update_bits(regmap, REG_REG13, REG13_AGC_EN, 0);
+
+ if (value >= 0) {
+ regmap_write(regmap, REG_YBRIGHT, (unsigned char)value);
+ regmap_update_bits(regmap, REG_SGNSET, SGNSET_YBRIGHT_MASK, 0);
+ } else{
+ regmap_write(regmap, REG_YBRIGHT, (unsigned char)(-value));
+ regmap_update_bits(regmap, REG_SGNSET, SGNSET_YBRIGHT_MASK, 1);
+ }
+
+ return 0;
+}
+
+static int ov7740_set_contrast(struct regmap *regmap, int value)
+{
+ return regmap_write(regmap, REG_YGAIN, (unsigned char)value);
+}
+
+static int ov7740_get_gain(struct ov7740 *ov7740, struct v4l2_ctrl *ctrl)
+{
+ struct regmap *regmap = ov7740->regmap;
+ unsigned int value0, value1;
+ int ret;
+
+ if (!ctrl->val)
+ return 0;
+
+ ret = regmap_read(regmap, REG_GAIN, &value0);
+ if (ret)
+ return ret;
+ ret = regmap_read(regmap, REG_CTRL15, &value1);
+ if (ret)
+ return ret;
+
+ ov7740->gain->val = (value1 << 8) | (value0 & 0xff);
+
+ return 0;
+}
+
+static int ov7740_set_exp(struct regmap *regmap, int value)
+{
+ int ret;
+
+ /* Turn off AEC/AGC */
+ ret = regmap_update_bits(regmap, REG_REG13,
+ REG13_AEC_EN | REG13_AGC_EN, 0);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(regmap, REG_AEC, (unsigned char)value);
+ if (ret)
+ return ret;
+
+ return regmap_write(regmap, REG_HAEC, (unsigned char)(value >> 8));
+}
+
+static int ov7740_set_autoexp(struct regmap *regmap,
+ enum v4l2_exposure_auto_type value)
+{
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_read(regmap, REG_REG13, ®);
+ if (!ret) {
+ if (value == V4L2_EXPOSURE_AUTO)
+ reg |= (REG13_AEC_EN | REG13_AGC_EN);
+ else
+ reg &= ~(REG13_AEC_EN | REG13_AGC_EN);
+ ret = regmap_write(regmap, REG_REG13, reg);
+ }
+
+ return ret;
+}
+
+
+static int ov7740_get_volatile_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct ov7740 *ov7740 = container_of(ctrl->handler,
+ struct ov7740, ctrl_handler);
+ int ret;
+
+ switch (ctrl->id) {
+ case V4L2_CID_AUTOGAIN:
+ ret = ov7740_get_gain(ov7740, ctrl);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int ov7740_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct ov7740 *ov7740 = container_of(ctrl->handler,
+ struct ov7740, ctrl_handler);
+ struct i2c_client *client = v4l2_get_subdevdata(&ov7740->subdev);
+ struct regmap *regmap = ov7740->regmap;
+ int ret;
+ u8 val = 0;
+
+ if (pm_runtime_get_if_in_use(&client->dev) <= 0)
+ return 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_AUTO_WHITE_BALANCE:
+ ret = ov7740_set_white_balance(ov7740, ctrl->val);
+ break;
+ case V4L2_CID_SATURATION:
+ ret = ov7740_set_saturation(regmap, ctrl->val);
+ break;
+ case V4L2_CID_BRIGHTNESS:
+ ret = ov7740_set_brightness(regmap, ctrl->val);
+ break;
+ case V4L2_CID_CONTRAST:
+ ret = ov7740_set_contrast(regmap, ctrl->val);
+ break;
+ case V4L2_CID_VFLIP:
+ ret = regmap_update_bits(regmap, REG_REG0C,
+ REG0C_IMG_FLIP, val);
+ break;
+ case V4L2_CID_HFLIP:
+ val = ctrl->val ? REG0C_IMG_MIRROR : 0x00;
+ ret = regmap_update_bits(regmap, REG_REG0C,
+ REG0C_IMG_MIRROR, val);
+ break;
+ case V4L2_CID_AUTOGAIN:
+ if (!ctrl->val)
+ return ov7740_set_gain(regmap, ov7740->gain->val);
+
+ ret = ov7740_set_autogain(regmap, ctrl->val);
+ break;
+
+ case V4L2_CID_EXPOSURE_AUTO:
+ if (ctrl->val == V4L2_EXPOSURE_MANUAL)
+ return ov7740_set_exp(regmap, ov7740->exposure->val);
+
+ ret = ov7740_set_autoexp(regmap, ctrl->val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ pm_runtime_put(&client->dev);
+
+ return ret;
+}
+
+static const struct v4l2_ctrl_ops ov7740_ctrl_ops = {
+ .g_volatile_ctrl = ov7740_get_volatile_ctrl,
+ .s_ctrl = ov7740_set_ctrl,
+};
+
+static int ov7740_start_streaming(struct ov7740 *ov7740)
+{
+ int ret;
+
+ if (ov7740->fmt) {
+ ret = regmap_multi_reg_write(ov7740->regmap,
+ ov7740->fmt->regs,
+ ov7740->fmt->reg_num);
+ if (ret)
+ return ret;
+ }
+
+ if (ov7740->frmsize) {
+ ret = regmap_multi_reg_write(ov7740->regmap,
+ ov7740->frmsize->regs,
+ ov7740->frmsize->reg_num);
+ if (ret)
+ return ret;
+ }
+
+ return __v4l2_ctrl_handler_setup(ov7740->subdev.ctrl_handler);
+}
+
+static int ov7740_set_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int ret = 0;
+
+ mutex_lock(&ov7740->mutex);
+ if (ov7740->streaming == enable) {
+ mutex_unlock(&ov7740->mutex);
+ return 0;
+ }
+
+ if (enable) {
+ ret = pm_runtime_get_sync(&client->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&client->dev);
+ goto err_unlock;
+ }
+
+ ret = ov7740_start_streaming(ov7740);
+ if (ret)
+ goto err_rpm_put;
+ } else {
+ pm_runtime_put(&client->dev);
+ }
+
+ ov7740->streaming = enable;
+
+ mutex_unlock(&ov7740->mutex);
+ return ret;
+
+err_rpm_put:
+ pm_runtime_put(&client->dev);
+err_unlock:
+ mutex_unlock(&ov7740->mutex);
+ return ret;
+}
+
+static int ov7740_get_parm(struct v4l2_subdev *sd,
+ struct v4l2_streamparm *parms)
+{
+ struct v4l2_captureparm *cp = &parms->parm.capture;
+ struct v4l2_fract *tpf = &cp->timeperframe;
+
+ if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ memset(cp, 0, sizeof(struct v4l2_captureparm));
+ cp->capability = V4L2_CAP_TIMEPERFRAME;
+
+ tpf->numerator = 1;
+ tpf->denominator = 60;
+
+ return 0;
+}
+
+static int ov7740_set_parm(struct v4l2_subdev *sd,
+ struct v4l2_streamparm *parms)
+{
+ struct v4l2_captureparm *cp = &parms->parm.capture;
+ struct v4l2_fract *tpf = &cp->timeperframe;
+
+ if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+ if (cp->extendedmode != 0)
+ return -EINVAL;
+
+ cp->capability = V4L2_CAP_TIMEPERFRAME;
+
+ tpf->numerator = 1;
+ tpf->denominator = 60;
+
+ return 0;
+}
+
+static struct v4l2_subdev_video_ops ov7740_subdev_video_ops = {
+ .s_stream = ov7740_set_stream,
+ .s_parm = ov7740_set_parm,
+ .g_parm = ov7740_get_parm,
+};
+
+static const struct reg_sequence ov7740_format_yuyv[] = {
+ {0x12, 0x00},
+ {0x36, 0x3f},
+ {0x80, 0x7f},
+ {0x83, 0x01},
+};
+
+static const struct reg_sequence ov7740_format_bggr8[] = {
+ {0x36, 0x2f},
+ {0x80, 0x01},
+ {0x83, 0x04},
+};
+
+static const struct ov7740_pixfmt ov7740_formats[] = {
+ {
+ .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .regs = ov7740_format_yuyv,
+ .reg_num = ARRAY_SIZE(ov7740_format_yuyv),
+ },
+ {
+ .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .regs = ov7740_format_bggr8,
+ .reg_num = ARRAY_SIZE(ov7740_format_bggr8),
+ }
+};
+#define N_OV7740_FMTS ARRAY_SIZE(ov7740_formats)
+
+static int ov7740_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->pad || code->index >= N_OV7740_FMTS)
+ return -EINVAL;
+
+ code->code = ov7740_formats[code->index].mbus_code;
+
+ return 0;
+}
+
+static int ov7740_enum_frame_interval(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_interval_enum *fie)
+{
+ if (fie->pad)
+ return -EINVAL;
+
+ if (fie->index >= 1)
+ return -EINVAL;
+
+ if ((fie->width != VGA_WIDTH) || (fie->height != VGA_HEIGHT))
+ return -EINVAL;
+
+ fie->interval.numerator = 1;
+ fie->interval.denominator = 60;
+
+ return 0;
+}
+
+static int ov7740_enum_frame_size(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ if (fse->pad)
+ return -EINVAL;
+
+ if (fse->index > 0)
+ return -EINVAL;
+
+ fse->min_width = fse->max_width = VGA_WIDTH;
+ fse->min_height = fse->max_height = VGA_HEIGHT;
+
+ return 0;
+}
+
+static int ov7740_try_fmt_internal(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *fmt,
+ const struct ov7740_pixfmt **ret_fmt,
+ const struct ov7740_framesize **ret_frmsize)
+{
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+ const struct ov7740_framesize *fsize = &ov7740_framesizes[0];
+ int index, i;
+
+ for (index = 0; index < N_OV7740_FMTS; index++) {
+ if (ov7740_formats[index].mbus_code == fmt->code)
+ break;
+ }
+ if (index >= N_OV7740_FMTS) {
+ /* default to first format */
+ index = 0;
+ fmt->code = ov7740_formats[0].mbus_code;
+ }
+ if (ret_fmt != NULL)
+ *ret_fmt = ov7740_formats + index;
+
+ for (i = 0; i < ARRAY_SIZE(ov7740_framesizes); i++) {
+ if ((fsize->width >= fmt->width) &&
+ (fsize->height >= fmt->height)) {
+ fmt->width = fsize->width;
+ fmt->height = fsize->height;
+ break;
+ }
+
+ fsize++;
+ }
+
+ if (ret_frmsize != NULL)
+ *ret_frmsize = fsize;
+
+ fmt->field = V4L2_FIELD_NONE;
+ fmt->colorspace = ov7740_formats[index].colorspace;
+
+ ov7740->format = *fmt;
+
+ return 0;
+}
+
+static int ov7740_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+ const struct ov7740_pixfmt *ovfmt;
+ const struct ov7740_framesize *fsize;
+#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
+ struct v4l2_mbus_framefmt *mbus_fmt;
+#endif
+ int ret;
+
+ mutex_lock(&ov7740->mutex);
+ if (format->pad) {
+ ret = -EINVAL;
+ goto error;
+ }
+
+ if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+ ret = ov7740_try_fmt_internal(sd, &format->format, NULL, NULL);
+ if (ret)
+ goto error;
+#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
+ mbus_fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
+ *mbus_fmt = format->format;
+
+ mutex_unlock(&ov7740->mutex);
+ return 0;
+#else
+ ret = -ENOTTY;
+ goto error;
+#endif
+ }
+
+ ret = ov7740_try_fmt_internal(sd, &format->format, &ovfmt, &fsize);
+ if (ret)
+ goto error;
+
+ ov7740->fmt = ovfmt;
+ ov7740->frmsize = fsize;
+
+ mutex_unlock(&ov7740->mutex);
+ return 0;
+
+error:
+ mutex_unlock(&ov7740->mutex);
+ return ret;
+}
+
+static int ov7740_get_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
+ struct v4l2_mbus_framefmt *mbus_fmt;
+#endif
+ int ret = 0;
+
+ mutex_lock(&ov7740->mutex);
+ if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
+ mbus_fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
+ format->format = *mbus_fmt;
+ ret = 0;
+#else
+ ret = -ENOTTY;
+#endif
+ } else {
+ format->format = ov7740->format;
+ }
+ mutex_unlock(&ov7740->mutex);
+
+ return ret;
+}
+
+static const struct v4l2_subdev_pad_ops ov7740_subdev_pad_ops = {
+ .enum_frame_interval = ov7740_enum_frame_interval,
+ .enum_frame_size = ov7740_enum_frame_size,
+ .enum_mbus_code = ov7740_enum_mbus_code,
+ .get_fmt = ov7740_get_fmt,
+ .set_fmt = ov7740_set_fmt,
+};
+
+static const struct v4l2_subdev_ops ov7740_subdev_ops = {
+ .core = &ov7740_subdev_core_ops,
+ .video = &ov7740_subdev_video_ops,
+ .pad = &ov7740_subdev_pad_ops,
+};
+
+static void ov7740_get_default_format(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *format)
+{
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+
+ format->width = ov7740->frmsize->width;
+ format->height = ov7740->frmsize->height;
+ format->colorspace = ov7740->fmt->colorspace;
+ format->code = ov7740->fmt->mbus_code;
+ format->field = V4L2_FIELD_NONE;
+}
+
+#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
+static int ov7740_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+ struct v4l2_mbus_framefmt *format =
+ v4l2_subdev_get_try_format(sd, fh->pad, 0);
+
+ mutex_lock(&ov7740->mutex);
+ ov7740_get_default_format(sd, format);
+ mutex_unlock(&ov7740->mutex);
+
+ return 0;
+}
+
+static const struct v4l2_subdev_internal_ops ov7740_subdev_internal_ops = {
+ .open = ov7740_open,
+};
+#endif
+
+static int ov7740_probe_dt(struct i2c_client *client,
+ struct ov7740 *ov7740)
+{
+ ov7740->resetb_gpio = devm_gpiod_get_optional(&client->dev, "reset",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(ov7740->resetb_gpio)) {
+ dev_info(&client->dev, "can't get %s GPIO\n", "reset");
+ return PTR_ERR(ov7740->resetb_gpio);
+ }
+
+ ov7740->pwdn_gpio = devm_gpiod_get_optional(&client->dev, "powerdown",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(ov7740->pwdn_gpio)) {
+ dev_info(&client->dev, "can't get %s GPIO\n", "powerdown");
+ return PTR_ERR(ov7740->pwdn_gpio);
+ }
+
+ return 0;
+}
+
+static int ov7740_detect(struct ov7740 *ov7740)
+{
+ struct regmap *regmap = ov7740->regmap;
+ unsigned int midh, midl, pidh, pidl;
+ int ret;
+
+ ret = regmap_read(regmap, REG_MIDH, &midh);
+ if (ret)
+ return ret;
+ if (midh != 0x7f)
+ return -ENODEV;
+
+ ret = regmap_read(regmap, REG_MIDL, &midl);
+ if (ret)
+ return ret;
+ if (midl != 0xa2)
+ return -ENODEV;
+
+ ret = regmap_read(regmap, REG_PIDH, &pidh);
+ if (ret)
+ return ret;
+ if (pidh != 0x77)
+ return -ENODEV;
+
+ ret = regmap_read(regmap, REG_PIDL, &pidl);
+ if (ret)
+ return ret;
+ if ((pidl != 0x40) && (pidl != 0x41) && (pidl != 0x42))
+ return -ENODEV;
+
+ return 0;
+}
+
+static int ov7740_init_controls(struct ov7740 *ov7740)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&ov7740->subdev);
+ struct v4l2_ctrl_handler *ctrl_hdlr = &ov7740->ctrl_handler;
+ int ret;
+
+ ret = v4l2_ctrl_handler_init(ctrl_hdlr, 2);
+ if (ret < 0)
+ return ret;
+
+ ctrl_hdlr->lock = &ov7740->mutex;
+ ov7740->auto_wb = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_AUTO_WHITE_BALANCE,
+ 0, 1, 1, 1);
+ ov7740->blue_balance = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_BLUE_BALANCE,
+ 0, 0xff, 1, 0x80);
+ ov7740->red_balance = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_RED_BALANCE,
+ 0, 0xff, 1, 0x80);
+
+ ov7740->brightness = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_BRIGHTNESS,
+ -255, 255, 1, 0);
+ ov7740->contrast = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_CONTRAST,
+ 0, 127, 1, 0x20);
+ ov7740->saturation = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_SATURATION, 0, 256, 1, 0x80);
+ ov7740->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ ov7740->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ ov7740->gain = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_GAIN, 0, 1023, 1, 500);
+ ov7740->auto_gain = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
+ ov7740->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_EXPOSURE, 0, 65535, 1, 500);
+ ov7740->auto_exposure = v4l2_ctrl_new_std_menu(ctrl_hdlr,
+ &ov7740_ctrl_ops,
+ V4L2_CID_EXPOSURE_AUTO,
+ V4L2_EXPOSURE_MANUAL, 0,
+ V4L2_EXPOSURE_AUTO);
+
+ ov7740->gain->flags |= V4L2_CTRL_FLAG_VOLATILE;
+ ov7740->exposure->flags |= V4L2_CTRL_FLAG_VOLATILE;
+
+ v4l2_ctrl_auto_cluster(3, &ov7740->auto_wb, 0, false);
+ v4l2_ctrl_auto_cluster(2, &ov7740->auto_gain, 0, true);
+ v4l2_ctrl_auto_cluster(2, &ov7740->auto_exposure,
+ V4L2_EXPOSURE_MANUAL, false);
+ v4l2_ctrl_cluster(2, &ov7740->hflip);
+
+ ret = v4l2_ctrl_handler_setup(ctrl_hdlr);
+ if (ret) {
+ dev_err(&client->dev, "%s control init failed (%d)\n",
+ __func__, ret);
+ goto error;
+ }
+
+ ov7740->subdev.ctrl_handler = ctrl_hdlr;
+ return 0;
+
+error:
+ v4l2_ctrl_handler_free(ctrl_hdlr);
+ mutex_destroy(&ov7740->mutex);
+ return ret;
+}
+
+static void ov7740_free_controls(struct ov7740 *ov7740)
+{
+ v4l2_ctrl_handler_free(ov7740->subdev.ctrl_handler);
+ mutex_destroy(&ov7740->mutex);
+}
+
+#define OV7740_MAX_REGISTER 0xff
+static const struct regmap_config ov7740_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = OV7740_MAX_REGISTER,
+};
+
+static int ov7740_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ov7740 *ov7740;
+ struct v4l2_subdev *sd;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev,
+ "OV7740: I2C-Adapter doesn't support SMBUS\n");
+ return -EIO;
+ }
+
+ ov7740 = devm_kzalloc(&client->dev, sizeof(*ov7740), GFP_KERNEL);
+ if (!ov7740)
+ return -ENOMEM;
+
+ ov7740->xvclk = devm_clk_get(&client->dev, "xvclk");
+ if (IS_ERR(ov7740->xvclk)) {
+ ret = PTR_ERR(ov7740->xvclk);
+ dev_err(&client->dev,
+ "OV7740: fail to get xvclk: %d\n", ret);
+ return ret;
+ }
+
+ ret = ov7740_probe_dt(client, ov7740);
+ if (ret)
+ return ret;
+
+ ov7740->regmap = devm_regmap_init_i2c(client, &ov7740_regmap_config);
+ if (IS_ERR(ov7740->regmap)) {
+ ret = PTR_ERR(ov7740->regmap);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ sd = &ov7740->subdev;
+ client->flags |= I2C_CLIENT_SCCB;
+ v4l2_i2c_subdev_init(sd, client, &ov7740_subdev_ops);
+
+#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
+ sd->internal_ops = &ov7740_subdev_internal_ops;
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+#endif
+
+#if defined(CONFIG_MEDIA_CONTROLLER)
+ ov7740->pad.flags = MEDIA_PAD_FL_SOURCE;
+ sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
+ ret = media_entity_pads_init(&sd->entity, 1, &ov7740->pad);
+ if (ret)
+ return ret;
+#endif
+
+ ret = ov7740_set_power(ov7740, 1);
+ if (ret)
+ return ret;
+
+ ret = ov7740_detect(ov7740);
+ if (ret)
+ goto error_detect;
+
+ mutex_init(&ov7740->mutex);
+
+ ret = ov7740_init_controls(ov7740);
+ if (ret)
+ goto error_init_controls;
+
+ v4l_info(client, "chip found @ 0x%02x (%s)\n",
+ client->addr << 1, client->adapter->name);
+
+ ov7740->fmt = &ov7740_formats[0];
+ ov7740->frmsize = &ov7740_framesizes[0];
+
+ ov7740_get_default_format(sd, &ov7740->format);
+
+ ret = v4l2_async_register_subdev(sd);
+ if (ret)
+ goto error_async_register;
+
+ pm_runtime_set_active(&client->dev);
+ pm_runtime_enable(&client->dev);
+ pm_runtime_idle(&client->dev);
+
+ return 0;
+
+error_async_register:
+ v4l2_ctrl_handler_free(ov7740->subdev.ctrl_handler);
+error_init_controls:
+ ov7740_free_controls(ov7740);
+error_detect:
+ ov7740_set_power(ov7740, 0);
+ media_entity_cleanup(&ov7740->subdev.entity);
+
+ return ret;
+}
+
+static int ov7740_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+
+ mutex_destroy(&ov7740->mutex);
+ v4l2_ctrl_handler_free(ov7740->subdev.ctrl_handler);
+#if defined(CONFIG_MEDIA_CONTROLLER)
+ media_entity_cleanup(&ov7740->subdev.entity);
+#endif
+ v4l2_async_unregister_subdev(sd);
+ ov7740_free_controls(ov7740);
+
+ pm_runtime_get_sync(&client->dev);
+ pm_runtime_disable(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
+ pm_runtime_put_noidle(&client->dev);
+
+ ov7740_set_power(ov7740, 0);
+ return 0;
+}
+
+static int __maybe_unused ov7740_runtime_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+
+ ov7740_set_power(ov7740, 0);
+
+ return 0;
+}
+
+static int __maybe_unused ov7740_runtime_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+
+ return ov7740_set_power(ov7740, 1);
+}
+
+static const struct i2c_device_id ov7740_id[] = {
+ { "ov7740", 0 },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, ov7740_id);
+
+static const struct dev_pm_ops ov7740_pm_ops = {
+ SET_RUNTIME_PM_OPS(ov7740_runtime_suspend, ov7740_runtime_resume, NULL)
+};
+
+static const struct of_device_id ov7740_of_match[] = {
+ {.compatible = "ovti,ov7740", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ov7740_of_match);
+
+static struct i2c_driver ov7740_i2c_driver = {
+ .driver = {
+ .name = "ov7740",
+ .pm = &ov7740_pm_ops,
+ .of_match_table = of_match_ptr(ov7740_of_match),
+ },
+ .probe = ov7740_probe,
+ .remove = ov7740_remove,
+ .id_table = ov7740_id,
+};
+module_i2c_driver(ov7740_i2c_driver);
+
+MODULE_DESCRIPTION("The V4L2 driver for Omnivision 7740 sensor");
+MODULE_AUTHOR("Songjun Wu <songjun.wu-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>");
+MODULE_LICENSE("GPL v2");
--
2.15.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox