* [PATCH v6 4/6] clk: meson: make the spinlock naming more specific
From: Yixun Lan @ 2017-12-11 6:48 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman
Cc: Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
Carlo Caione, Yixun Lan, Qiufang Dai, Jian Hu, linux-amlogic,
devicetree, linux-clk, linux-arm-kernel, linux-kernel
In-Reply-To: <20171211064853.32111-1-yixun.lan@amlogic.com>
Make the spinlock more specific, so better for lockdep
debugging and ctags/grep.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
this patch try to address the issue which bring up by Stephen at [1]
[1] http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005534.html
---
drivers/clk/meson/axg.c | 34 +++++++-------
drivers/clk/meson/clkc.h | 2 +-
drivers/clk/meson/gxbb.c | 112 ++++++++++++++++++++++----------------------
drivers/clk/meson/meson8b.c | 24 +++++-----
4 files changed, 86 insertions(+), 86 deletions(-)
diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
index cba75409f929..8d8758089472 100644
--- a/drivers/clk/meson/axg.c
+++ b/drivers/clk/meson/axg.c
@@ -19,7 +19,7 @@
#include "clkc.h"
#include "axg.h"
-static DEFINE_SPINLOCK(clk_lock);
+static DEFINE_SPINLOCK(meson_clk_lock);
static const struct pll_rate_table sys_pll_rate_table[] = {
PLL_RATE(24000000, 56, 1, 2),
@@ -129,7 +129,7 @@ static struct meson_clk_pll axg_fixed_pll = {
.shift = 16,
.width = 2,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "fixed_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -157,7 +157,7 @@ static struct meson_clk_pll axg_sys_pll = {
},
.rate_table = sys_pll_rate_table,
.rate_count = ARRAY_SIZE(sys_pll_rate_table),
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sys_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -291,7 +291,7 @@ static struct meson_clk_pll axg_gp0_pll = {
},
.rate_table = axg_gp0_pll_rate_table,
.rate_count = ARRAY_SIZE(axg_gp0_pll_rate_table),
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "gp0_pll",
.ops = &meson_clk_pll_ops,
@@ -383,7 +383,7 @@ static struct meson_clk_mpll axg_mpll0 = {
.shift = 25,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll0",
.ops = &meson_clk_mpll_ops,
@@ -413,7 +413,7 @@ static struct meson_clk_mpll axg_mpll1 = {
.shift = 14,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll1",
.ops = &meson_clk_mpll_ops,
@@ -443,7 +443,7 @@ static struct meson_clk_mpll axg_mpll2 = {
.shift = 14,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll2",
.ops = &meson_clk_mpll_ops,
@@ -473,7 +473,7 @@ static struct meson_clk_mpll axg_mpll3 = {
.shift = 0,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll3",
.ops = &meson_clk_mpll_ops,
@@ -499,7 +499,7 @@ static struct clk_mux axg_mpeg_clk_sel = {
.shift = 12,
.flags = CLK_MUX_READ_ONLY,
.table = mux_table_clk81,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_sel",
.ops = &clk_mux_ro_ops,
@@ -518,7 +518,7 @@ static struct clk_divider axg_mpeg_clk_div = {
.reg = (void *)HHI_MPEG_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_div",
.ops = &clk_divider_ops,
@@ -531,7 +531,7 @@ static struct clk_divider axg_mpeg_clk_div = {
static struct clk_gate axg_clk81 = {
.reg = (void *)HHI_MPEG_CLK_CNTL,
.bit_idx = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "clk81",
.ops = &clk_gate_ops,
@@ -557,7 +557,7 @@ static struct clk_mux axg_sd_emmc_b_clk0_sel = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.mask = 0x7,
.shift = 25,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_b_clk0_sel",
.ops = &clk_mux_ops,
@@ -571,7 +571,7 @@ static struct clk_divider axg_sd_emmc_b_clk0_div = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.shift = 16,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.flags = CLK_DIVIDER_ROUND_CLOSEST,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_b_clk0_div",
@@ -585,7 +585,7 @@ static struct clk_divider axg_sd_emmc_b_clk0_div = {
static struct clk_gate axg_sd_emmc_b_clk0 = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.bit_idx = 23,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sd_emmc_b_clk0",
.ops = &clk_gate_ops,
@@ -600,7 +600,7 @@ static struct clk_mux axg_sd_emmc_c_clk0_sel = {
.reg = (void *)HHI_NAND_CLK_CNTL,
.mask = 0x7,
.shift = 9,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_c_clk0_sel",
.ops = &clk_mux_ops,
@@ -614,7 +614,7 @@ static struct clk_divider axg_sd_emmc_c_clk0_div = {
.reg = (void *)HHI_NAND_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.flags = CLK_DIVIDER_ROUND_CLOSEST,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_c_clk0_div",
@@ -628,7 +628,7 @@ static struct clk_divider axg_sd_emmc_c_clk0_div = {
static struct clk_gate axg_sd_emmc_c_clk0 = {
.reg = (void *)HHI_NAND_CLK_CNTL,
.bit_idx = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sd_emmc_c_clk0",
.ops = &clk_gate_ops,
diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
index 1629da9b4141..87f06a801a4d 100644
--- a/drivers/clk/meson/clkc.h
+++ b/drivers/clk/meson/clkc.h
@@ -134,7 +134,7 @@ struct meson_clk_audio_divider {
struct clk_gate _name = { \
.reg = (void __iomem *) _reg, \
.bit_idx = (_bit), \
- .lock = &clk_lock, \
+ .lock = &meson_clk_lock, \
.hw.init = &(struct clk_init_data) { \
.name = #_name, \
.ops = &clk_gate_ops, \
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index ae385310e980..48936fbe7fd0 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -27,7 +27,7 @@
#include "clkc.h"
#include "gxbb.h"
-static DEFINE_SPINLOCK(clk_lock);
+static DEFINE_SPINLOCK(meson_clk_lock);
static const struct pll_rate_table sys_pll_rate_table[] = {
PLL_RATE(24000000, 56, 1, 2),
@@ -294,7 +294,7 @@ static struct meson_clk_pll gxbb_fixed_pll = {
.shift = 16,
.width = 2,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "fixed_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -330,7 +330,7 @@ static struct meson_clk_pll gxbb_hdmi_pll = {
.shift = 22,
.width = 2,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "hdmi_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -358,7 +358,7 @@ static struct meson_clk_pll gxbb_sys_pll = {
},
.rate_table = sys_pll_rate_table,
.rate_count = ARRAY_SIZE(sys_pll_rate_table),
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sys_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -399,7 +399,7 @@ static struct meson_clk_pll gxbb_gp0_pll = {
},
.rate_table = gxbb_gp0_pll_rate_table,
.rate_count = ARRAY_SIZE(gxbb_gp0_pll_rate_table),
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "gp0_pll",
.ops = &meson_clk_pll_ops,
@@ -442,7 +442,7 @@ static struct meson_clk_pll gxl_gp0_pll = {
},
.rate_table = gxl_gp0_pll_rate_table,
.rate_count = ARRAY_SIZE(gxl_gp0_pll_rate_table),
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "gp0_pll",
.ops = &meson_clk_pll_ops,
@@ -533,7 +533,7 @@ static struct meson_clk_mpll gxbb_mpll0 = {
.shift = 25,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll0",
.ops = &meson_clk_mpll_ops,
@@ -563,7 +563,7 @@ static struct meson_clk_mpll gxbb_mpll1 = {
.shift = 14,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll1",
.ops = &meson_clk_mpll_ops,
@@ -593,7 +593,7 @@ static struct meson_clk_mpll gxbb_mpll2 = {
.shift = 14,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll2",
.ops = &meson_clk_mpll_ops,
@@ -620,7 +620,7 @@ static struct clk_mux gxbb_mpeg_clk_sel = {
.shift = 12,
.flags = CLK_MUX_READ_ONLY,
.table = mux_table_clk81,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_sel",
.ops = &clk_mux_ro_ops,
@@ -639,7 +639,7 @@ static struct clk_divider gxbb_mpeg_clk_div = {
.reg = (void *)HHI_MPEG_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_div",
.ops = &clk_divider_ops,
@@ -653,7 +653,7 @@ static struct clk_divider gxbb_mpeg_clk_div = {
static struct clk_gate gxbb_clk81 = {
.reg = (void *)HHI_MPEG_CLK_CNTL,
.bit_idx = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "clk81",
.ops = &clk_gate_ops,
@@ -667,7 +667,7 @@ static struct clk_mux gxbb_sar_adc_clk_sel = {
.reg = (void *)HHI_SAR_CLK_CNTL,
.mask = 0x3,
.shift = 9,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sar_adc_clk_sel",
.ops = &clk_mux_ops,
@@ -681,7 +681,7 @@ static struct clk_divider gxbb_sar_adc_clk_div = {
.reg = (void *)HHI_SAR_CLK_CNTL,
.shift = 0,
.width = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sar_adc_clk_div",
.ops = &clk_divider_ops,
@@ -693,7 +693,7 @@ static struct clk_divider gxbb_sar_adc_clk_div = {
static struct clk_gate gxbb_sar_adc_clk = {
.reg = (void *)HHI_SAR_CLK_CNTL,
.bit_idx = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sar_adc_clk",
.ops = &clk_gate_ops,
@@ -719,7 +719,7 @@ static struct clk_mux gxbb_mali_0_sel = {
.mask = 0x7,
.shift = 9,
.table = mux_table_mali_0_1,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali_0_sel",
.ops = &clk_mux_ops,
@@ -738,7 +738,7 @@ static struct clk_divider gxbb_mali_0_div = {
.reg = (void *)HHI_MALI_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali_0_div",
.ops = &clk_divider_ops,
@@ -751,7 +751,7 @@ static struct clk_divider gxbb_mali_0_div = {
static struct clk_gate gxbb_mali_0 = {
.reg = (void *)HHI_MALI_CLK_CNTL,
.bit_idx = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali_0",
.ops = &clk_gate_ops,
@@ -766,7 +766,7 @@ static struct clk_mux gxbb_mali_1_sel = {
.mask = 0x7,
.shift = 25,
.table = mux_table_mali_0_1,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali_1_sel",
.ops = &clk_mux_ops,
@@ -785,7 +785,7 @@ static struct clk_divider gxbb_mali_1_div = {
.reg = (void *)HHI_MALI_CLK_CNTL,
.shift = 16,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali_1_div",
.ops = &clk_divider_ops,
@@ -798,7 +798,7 @@ static struct clk_divider gxbb_mali_1_div = {
static struct clk_gate gxbb_mali_1 = {
.reg = (void *)HHI_MALI_CLK_CNTL,
.bit_idx = 24,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali_1",
.ops = &clk_gate_ops,
@@ -818,7 +818,7 @@ static struct clk_mux gxbb_mali = {
.mask = 1,
.shift = 31,
.table = mux_table_mali,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali",
.ops = &clk_mux_ops,
@@ -834,7 +834,7 @@ static struct clk_mux gxbb_cts_amclk_sel = {
.shift = 9,
/* Default parent unknown (register reset value: 0) */
.table = (u32[]){ 1, 2, 3 },
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "cts_amclk_sel",
.ops = &clk_mux_ops,
@@ -851,7 +851,7 @@ static struct meson_clk_audio_divider gxbb_cts_amclk_div = {
.width = 8,
},
.flags = CLK_DIVIDER_ROUND_CLOSEST,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "cts_amclk_div",
.ops = &meson_clk_audio_divider_ops,
@@ -864,7 +864,7 @@ static struct meson_clk_audio_divider gxbb_cts_amclk_div = {
static struct clk_gate gxbb_cts_amclk = {
.reg = (void *) HHI_AUD_CLK_CNTL,
.bit_idx = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "cts_amclk",
.ops = &clk_gate_ops,
@@ -880,7 +880,7 @@ static struct clk_mux gxbb_cts_mclk_i958_sel = {
.shift = 25,
/* Default parent unknown (register reset value: 0) */
.table = (u32[]){ 1, 2, 3 },
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "cts_mclk_i958_sel",
.ops = &clk_mux_ops,
@@ -894,7 +894,7 @@ static struct clk_divider gxbb_cts_mclk_i958_div = {
.reg = (void *)HHI_AUD_CLK_CNTL2,
.shift = 16,
.width = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.flags = CLK_DIVIDER_ROUND_CLOSEST,
.hw.init = &(struct clk_init_data) {
.name = "cts_mclk_i958_div",
@@ -908,7 +908,7 @@ static struct clk_divider gxbb_cts_mclk_i958_div = {
static struct clk_gate gxbb_cts_mclk_i958 = {
.reg = (void *)HHI_AUD_CLK_CNTL2,
.bit_idx = 24,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "cts_mclk_i958",
.ops = &clk_gate_ops,
@@ -922,7 +922,7 @@ static struct clk_mux gxbb_cts_i958 = {
.reg = (void *)HHI_AUD_CLK_CNTL2,
.mask = 0x1,
.shift = 27,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "cts_i958",
.ops = &clk_mux_ops,
@@ -940,7 +940,7 @@ static struct clk_divider gxbb_32k_clk_div = {
.reg = (void *)HHI_32K_CLK_CNTL,
.shift = 0,
.width = 14,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "32k_clk_div",
.ops = &clk_divider_ops,
@@ -953,7 +953,7 @@ static struct clk_divider gxbb_32k_clk_div = {
static struct clk_gate gxbb_32k_clk = {
.reg = (void *)HHI_32K_CLK_CNTL,
.bit_idx = 15,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "32k_clk",
.ops = &clk_gate_ops,
@@ -971,7 +971,7 @@ static struct clk_mux gxbb_32k_clk_sel = {
.reg = (void *)HHI_32K_CLK_CNTL,
.mask = 0x3,
.shift = 16,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "32k_clk_sel",
.ops = &clk_mux_ops,
@@ -997,7 +997,7 @@ static struct clk_mux gxbb_sd_emmc_a_clk0_sel = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.mask = 0x7,
.shift = 9,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_a_clk0_sel",
.ops = &clk_mux_ops,
@@ -1011,7 +1011,7 @@ static struct clk_divider gxbb_sd_emmc_a_clk0_div = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.flags = CLK_DIVIDER_ROUND_CLOSEST,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_a_clk0_div",
@@ -1025,7 +1025,7 @@ static struct clk_divider gxbb_sd_emmc_a_clk0_div = {
static struct clk_gate gxbb_sd_emmc_a_clk0 = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.bit_idx = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sd_emmc_a_clk0",
.ops = &clk_gate_ops,
@@ -1050,7 +1050,7 @@ static struct clk_mux gxbb_sd_emmc_b_clk0_sel = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.mask = 0x7,
.shift = 25,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_b_clk0_sel",
.ops = &clk_mux_ops,
@@ -1064,7 +1064,7 @@ static struct clk_divider gxbb_sd_emmc_b_clk0_div = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.shift = 16,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.flags = CLK_DIVIDER_ROUND_CLOSEST,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_b_clk0_div",
@@ -1078,7 +1078,7 @@ static struct clk_divider gxbb_sd_emmc_b_clk0_div = {
static struct clk_gate gxbb_sd_emmc_b_clk0 = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.bit_idx = 23,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sd_emmc_b_clk0",
.ops = &clk_gate_ops,
@@ -1093,7 +1093,7 @@ static struct clk_mux gxbb_sd_emmc_c_clk0_sel = {
.reg = (void *)HHI_NAND_CLK_CNTL,
.mask = 0x7,
.shift = 9,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_c_clk0_sel",
.ops = &clk_mux_ops,
@@ -1107,7 +1107,7 @@ static struct clk_divider gxbb_sd_emmc_c_clk0_div = {
.reg = (void *)HHI_NAND_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.flags = CLK_DIVIDER_ROUND_CLOSEST,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_c_clk0_div",
@@ -1121,7 +1121,7 @@ static struct clk_divider gxbb_sd_emmc_c_clk0_div = {
static struct clk_gate gxbb_sd_emmc_c_clk0 = {
.reg = (void *)HHI_NAND_CLK_CNTL,
.bit_idx = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sd_emmc_c_clk0",
.ops = &clk_gate_ops,
@@ -1142,7 +1142,7 @@ static struct clk_mux gxbb_vpu_0_sel = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.mask = 0x3,
.shift = 9,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.table = mux_table_vpu,
.hw.init = &(struct clk_init_data){
.name = "vpu_0_sel",
@@ -1161,7 +1161,7 @@ static struct clk_divider gxbb_vpu_0_div = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vpu_0_div",
.ops = &clk_divider_ops,
@@ -1174,7 +1174,7 @@ static struct clk_divider gxbb_vpu_0_div = {
static struct clk_gate gxbb_vpu_0 = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.bit_idx = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "vpu_0",
.ops = &clk_gate_ops,
@@ -1188,7 +1188,7 @@ static struct clk_mux gxbb_vpu_1_sel = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.mask = 0x3,
.shift = 25,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.table = mux_table_vpu,
.hw.init = &(struct clk_init_data){
.name = "vpu_1_sel",
@@ -1207,7 +1207,7 @@ static struct clk_divider gxbb_vpu_1_div = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.shift = 16,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vpu_1_div",
.ops = &clk_divider_ops,
@@ -1220,7 +1220,7 @@ static struct clk_divider gxbb_vpu_1_div = {
static struct clk_gate gxbb_vpu_1 = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.bit_idx = 24,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "vpu_1",
.ops = &clk_gate_ops,
@@ -1234,7 +1234,7 @@ static struct clk_mux gxbb_vpu = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.mask = 1,
.shift = 31,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vpu",
.ops = &clk_mux_ops,
@@ -1259,7 +1259,7 @@ static struct clk_mux gxbb_vapb_0_sel = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.mask = 0x3,
.shift = 9,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.table = mux_table_vapb,
.hw.init = &(struct clk_init_data){
.name = "vapb_0_sel",
@@ -1278,7 +1278,7 @@ static struct clk_divider gxbb_vapb_0_div = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vapb_0_div",
.ops = &clk_divider_ops,
@@ -1291,7 +1291,7 @@ static struct clk_divider gxbb_vapb_0_div = {
static struct clk_gate gxbb_vapb_0 = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.bit_idx = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "vapb_0",
.ops = &clk_gate_ops,
@@ -1305,7 +1305,7 @@ static struct clk_mux gxbb_vapb_1_sel = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.mask = 0x3,
.shift = 25,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.table = mux_table_vapb,
.hw.init = &(struct clk_init_data){
.name = "vapb_1_sel",
@@ -1324,7 +1324,7 @@ static struct clk_divider gxbb_vapb_1_div = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.shift = 16,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vapb_1_div",
.ops = &clk_divider_ops,
@@ -1337,7 +1337,7 @@ static struct clk_divider gxbb_vapb_1_div = {
static struct clk_gate gxbb_vapb_1 = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.bit_idx = 24,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "vapb_1",
.ops = &clk_gate_ops,
@@ -1351,7 +1351,7 @@ static struct clk_mux gxbb_vapb_sel = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.mask = 1,
.shift = 31,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vapb_sel",
.ops = &clk_mux_ops,
@@ -1368,7 +1368,7 @@ static struct clk_mux gxbb_vapb_sel = {
static struct clk_gate gxbb_vapb = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.bit_idx = 30,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "vapb",
.ops = &clk_gate_ops,
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 20ab7190d328..3ffea80c1308 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -32,7 +32,7 @@
#include "clkc.h"
#include "meson8b.h"
-static DEFINE_SPINLOCK(clk_lock);
+static DEFINE_SPINLOCK(meson_clk_lock);
static void __iomem *clk_base;
@@ -136,7 +136,7 @@ static struct meson_clk_pll meson8b_fixed_pll = {
.shift = 16,
.width = 2,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "fixed_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -162,7 +162,7 @@ static struct meson_clk_pll meson8b_vid_pll = {
.shift = 16,
.width = 2,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vid_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -190,7 +190,7 @@ static struct meson_clk_pll meson8b_sys_pll = {
},
.rate_table = sys_pll_rate_table,
.rate_count = ARRAY_SIZE(sys_pll_rate_table),
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sys_pll",
.ops = &meson_clk_pll_ops,
@@ -281,7 +281,7 @@ static struct meson_clk_mpll meson8b_mpll0 = {
.shift = 25,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll0",
.ops = &meson_clk_mpll_ops,
@@ -311,7 +311,7 @@ static struct meson_clk_mpll meson8b_mpll1 = {
.shift = 14,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll1",
.ops = &meson_clk_mpll_ops,
@@ -341,7 +341,7 @@ static struct meson_clk_mpll meson8b_mpll2 = {
.shift = 14,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll2",
.ops = &meson_clk_mpll_ops,
@@ -375,7 +375,7 @@ struct clk_mux meson8b_mpeg_clk_sel = {
.shift = 12,
.flags = CLK_MUX_READ_ONLY,
.table = mux_table_clk81,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_sel",
.ops = &clk_mux_ro_ops,
@@ -395,7 +395,7 @@ struct clk_divider meson8b_mpeg_clk_div = {
.reg = (void *)HHI_MPEG_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_div",
.ops = &clk_divider_ops,
@@ -408,7 +408,7 @@ struct clk_divider meson8b_mpeg_clk_div = {
struct clk_gate meson8b_clk81 = {
.reg = (void *)HHI_MPEG_CLK_CNTL,
.bit_idx = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "clk81",
.ops = &clk_gate_ops,
@@ -773,7 +773,7 @@ static int meson8b_clk_reset_update(struct reset_controller_dev *rcdev,
reset = &meson8b_clk_reset_bits[id];
- spin_lock_irqsave(&clk_lock, flags);
+ spin_lock_irqsave(&meson_clk_lock, flags);
val = readl(meson8b_clk_reset->base + reset->reg);
if (assert)
@@ -782,7 +782,7 @@ static int meson8b_clk_reset_update(struct reset_controller_dev *rcdev,
val &= ~BIT(reset->bit_idx);
writel(val, meson8b_clk_reset->base + reset->reg);
- spin_unlock_irqrestore(&clk_lock, flags);
+ spin_unlock_irqrestore(&meson_clk_lock, flags);
return 0;
}
--
2.15.1
^ permalink raw reply related
* [PATCH v6 3/6] clk: meson-axg: add clock controller drivers
From: Yixun Lan @ 2017-12-11 6:48 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman
Cc: Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
Carlo Caione, Yixun Lan, Qiufang Dai, Jian Hu, linux-amlogic,
devicetree, linux-clk, linux-arm-kernel, linux-kernel
In-Reply-To: <20171211064853.32111-1-yixun.lan@amlogic.com>
From: Qiufang Dai <qiufang.dai@amlogic.com>
Add clock controller drivers for Amlogic Meson-AXG SoC.
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
arch/arm64/Kconfig.platforms | 1 +
drivers/clk/meson/Kconfig | 8 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/axg.c | 944 +++++++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/axg.h | 126 ++++++
5 files changed, 1080 insertions(+)
create mode 100644 drivers/clk/meson/axg.c
create mode 100644 drivers/clk/meson/axg.h
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 2401373565ff..fbedbd8f619a 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -105,6 +105,7 @@ config ARCH_MESON
select PINCTRL_MESON
select COMMON_CLK_AMLOGIC
select COMMON_CLK_GXBB
+ select COMMON_CLK_AXG
select MESON_IRQ_GPIO
help
This enables support for the Amlogic S905 SoCs.
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index d2d0174a6eca..7694302c70a4 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -19,3 +19,11 @@ config COMMON_CLK_GXBB
help
Support for the clock controller on AmLogic S905 devices, aka gxbb.
Say Y if you want peripherals and CPU frequency scaling to work.
+
+config COMMON_CLK_AXG
+ bool
+ depends on COMMON_CLK_AMLOGIC
+ select RESET_CONTROLLER
+ help
+ Support for the clock controller on AmLogic A113D devices, aka axg.
+ Say Y if you want peripherals and CPU frequency scaling to work.
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index b139d41b25da..3c03ce583798 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -5,3 +5,4 @@
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o clk-audio-divider.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o gxbb-aoclk-32k.o
+obj-$(CONFIG_COMMON_CLK_AXG) += axg.o
diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
new file mode 100644
index 000000000000..cba75409f929
--- /dev/null
+++ b/drivers/clk/meson/axg.c
@@ -0,0 +1,944 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * AmLogic Meson-AXG Clock Controller Driver
+ *
+ * Copyright (c) 2016 Baylibre SAS.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2017 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+
+#include "clkc.h"
+#include "axg.h"
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static const struct pll_rate_table sys_pll_rate_table[] = {
+ PLL_RATE(24000000, 56, 1, 2),
+ PLL_RATE(48000000, 64, 1, 2),
+ PLL_RATE(72000000, 72, 1, 2),
+ PLL_RATE(96000000, 64, 1, 2),
+ PLL_RATE(120000000, 80, 1, 2),
+ PLL_RATE(144000000, 96, 1, 2),
+ PLL_RATE(168000000, 56, 1, 1),
+ PLL_RATE(192000000, 64, 1, 1),
+ PLL_RATE(216000000, 72, 1, 1),
+ PLL_RATE(240000000, 80, 1, 1),
+ PLL_RATE(264000000, 88, 1, 1),
+ PLL_RATE(288000000, 96, 1, 1),
+ PLL_RATE(312000000, 52, 1, 2),
+ PLL_RATE(336000000, 56, 1, 2),
+ PLL_RATE(360000000, 60, 1, 2),
+ PLL_RATE(384000000, 64, 1, 2),
+ PLL_RATE(408000000, 68, 1, 2),
+ PLL_RATE(432000000, 72, 1, 2),
+ PLL_RATE(456000000, 76, 1, 2),
+ PLL_RATE(480000000, 80, 1, 2),
+ PLL_RATE(504000000, 84, 1, 2),
+ PLL_RATE(528000000, 88, 1, 2),
+ PLL_RATE(552000000, 92, 1, 2),
+ PLL_RATE(576000000, 96, 1, 2),
+ PLL_RATE(600000000, 50, 1, 1),
+ PLL_RATE(624000000, 52, 1, 1),
+ PLL_RATE(648000000, 54, 1, 1),
+ PLL_RATE(672000000, 56, 1, 1),
+ PLL_RATE(696000000, 58, 1, 1),
+ PLL_RATE(720000000, 60, 1, 1),
+ PLL_RATE(744000000, 62, 1, 1),
+ PLL_RATE(768000000, 64, 1, 1),
+ PLL_RATE(792000000, 66, 1, 1),
+ PLL_RATE(816000000, 68, 1, 1),
+ PLL_RATE(840000000, 70, 1, 1),
+ PLL_RATE(864000000, 72, 1, 1),
+ PLL_RATE(888000000, 74, 1, 1),
+ PLL_RATE(912000000, 76, 1, 1),
+ PLL_RATE(936000000, 78, 1, 1),
+ PLL_RATE(960000000, 80, 1, 1),
+ PLL_RATE(984000000, 82, 1, 1),
+ PLL_RATE(1008000000, 84, 1, 1),
+ PLL_RATE(1032000000, 86, 1, 1),
+ PLL_RATE(1056000000, 88, 1, 1),
+ PLL_RATE(1080000000, 90, 1, 1),
+ PLL_RATE(1104000000, 92, 1, 1),
+ PLL_RATE(1128000000, 94, 1, 1),
+ PLL_RATE(1152000000, 96, 1, 1),
+ PLL_RATE(1176000000, 98, 1, 1),
+ PLL_RATE(1200000000, 50, 1, 0),
+ PLL_RATE(1224000000, 51, 1, 0),
+ PLL_RATE(1248000000, 52, 1, 0),
+ PLL_RATE(1272000000, 53, 1, 0),
+ PLL_RATE(1296000000, 54, 1, 0),
+ PLL_RATE(1320000000, 55, 1, 0),
+ PLL_RATE(1344000000, 56, 1, 0),
+ PLL_RATE(1368000000, 57, 1, 0),
+ PLL_RATE(1392000000, 58, 1, 0),
+ PLL_RATE(1416000000, 59, 1, 0),
+ PLL_RATE(1440000000, 60, 1, 0),
+ PLL_RATE(1464000000, 61, 1, 0),
+ PLL_RATE(1488000000, 62, 1, 0),
+ PLL_RATE(1512000000, 63, 1, 0),
+ PLL_RATE(1536000000, 64, 1, 0),
+ PLL_RATE(1560000000, 65, 1, 0),
+ PLL_RATE(1584000000, 66, 1, 0),
+ PLL_RATE(1608000000, 67, 1, 0),
+ PLL_RATE(1632000000, 68, 1, 0),
+ PLL_RATE(1656000000, 68, 1, 0),
+ PLL_RATE(1680000000, 68, 1, 0),
+ PLL_RATE(1704000000, 68, 1, 0),
+ PLL_RATE(1728000000, 69, 1, 0),
+ PLL_RATE(1752000000, 69, 1, 0),
+ PLL_RATE(1776000000, 69, 1, 0),
+ PLL_RATE(1800000000, 69, 1, 0),
+ PLL_RATE(1824000000, 70, 1, 0),
+ PLL_RATE(1848000000, 70, 1, 0),
+ PLL_RATE(1872000000, 70, 1, 0),
+ PLL_RATE(1896000000, 70, 1, 0),
+ PLL_RATE(1920000000, 71, 1, 0),
+ PLL_RATE(1944000000, 71, 1, 0),
+ PLL_RATE(1968000000, 71, 1, 0),
+ PLL_RATE(1992000000, 71, 1, 0),
+ PLL_RATE(2016000000, 72, 1, 0),
+ PLL_RATE(2040000000, 72, 1, 0),
+ PLL_RATE(2064000000, 72, 1, 0),
+ PLL_RATE(2088000000, 72, 1, 0),
+ PLL_RATE(2112000000, 73, 1, 0),
+ { /* sentinel */ },
+};
+
+static struct meson_clk_pll axg_fixed_pll = {
+ .m = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "fixed_pll",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ .flags = CLK_GET_RATE_NOCACHE,
+ },
+};
+
+static struct meson_clk_pll axg_sys_pll = {
+ .m = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 10,
+ .width = 2,
+ },
+ .rate_table = sys_pll_rate_table,
+ .rate_count = ARRAY_SIZE(sys_pll_rate_table),
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sys_pll",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ .flags = CLK_GET_RATE_NOCACHE,
+ },
+};
+
+static const struct pll_rate_table axg_gp0_pll_rate_table[] = {
+ PLL_RATE(240000000, 40, 1, 2),
+ PLL_RATE(246000000, 41, 1, 2),
+ PLL_RATE(252000000, 42, 1, 2),
+ PLL_RATE(258000000, 43, 1, 2),
+ PLL_RATE(264000000, 44, 1, 2),
+ PLL_RATE(270000000, 45, 1, 2),
+ PLL_RATE(276000000, 46, 1, 2),
+ PLL_RATE(282000000, 47, 1, 2),
+ PLL_RATE(288000000, 48, 1, 2),
+ PLL_RATE(294000000, 49, 1, 2),
+ PLL_RATE(300000000, 50, 1, 2),
+ PLL_RATE(306000000, 51, 1, 2),
+ PLL_RATE(312000000, 52, 1, 2),
+ PLL_RATE(318000000, 53, 1, 2),
+ PLL_RATE(324000000, 54, 1, 2),
+ PLL_RATE(330000000, 55, 1, 2),
+ PLL_RATE(336000000, 56, 1, 2),
+ PLL_RATE(342000000, 57, 1, 2),
+ PLL_RATE(348000000, 58, 1, 2),
+ PLL_RATE(354000000, 59, 1, 2),
+ PLL_RATE(360000000, 60, 1, 2),
+ PLL_RATE(366000000, 61, 1, 2),
+ PLL_RATE(372000000, 62, 1, 2),
+ PLL_RATE(378000000, 63, 1, 2),
+ PLL_RATE(384000000, 64, 1, 2),
+ PLL_RATE(390000000, 65, 1, 3),
+ PLL_RATE(396000000, 66, 1, 3),
+ PLL_RATE(402000000, 67, 1, 3),
+ PLL_RATE(408000000, 68, 1, 3),
+ PLL_RATE(480000000, 40, 1, 1),
+ PLL_RATE(492000000, 41, 1, 1),
+ PLL_RATE(504000000, 42, 1, 1),
+ PLL_RATE(516000000, 43, 1, 1),
+ PLL_RATE(528000000, 44, 1, 1),
+ PLL_RATE(540000000, 45, 1, 1),
+ PLL_RATE(552000000, 46, 1, 1),
+ PLL_RATE(564000000, 47, 1, 1),
+ PLL_RATE(576000000, 48, 1, 1),
+ PLL_RATE(588000000, 49, 1, 1),
+ PLL_RATE(600000000, 50, 1, 1),
+ PLL_RATE(612000000, 51, 1, 1),
+ PLL_RATE(624000000, 52, 1, 1),
+ PLL_RATE(636000000, 53, 1, 1),
+ PLL_RATE(648000000, 54, 1, 1),
+ PLL_RATE(660000000, 55, 1, 1),
+ PLL_RATE(672000000, 56, 1, 1),
+ PLL_RATE(684000000, 57, 1, 1),
+ PLL_RATE(696000000, 58, 1, 1),
+ PLL_RATE(708000000, 59, 1, 1),
+ PLL_RATE(720000000, 60, 1, 1),
+ PLL_RATE(732000000, 61, 1, 1),
+ PLL_RATE(744000000, 62, 1, 1),
+ PLL_RATE(756000000, 63, 1, 1),
+ PLL_RATE(768000000, 64, 1, 1),
+ PLL_RATE(780000000, 65, 1, 1),
+ PLL_RATE(792000000, 66, 1, 1),
+ PLL_RATE(804000000, 67, 1, 1),
+ PLL_RATE(816000000, 68, 1, 1),
+ PLL_RATE(960000000, 40, 1, 0),
+ PLL_RATE(984000000, 41, 1, 0),
+ PLL_RATE(1008000000, 42, 1, 0),
+ PLL_RATE(1032000000, 43, 1, 0),
+ PLL_RATE(1056000000, 44, 1, 0),
+ PLL_RATE(1080000000, 45, 1, 0),
+ PLL_RATE(1104000000, 46, 1, 0),
+ PLL_RATE(1128000000, 47, 1, 0),
+ PLL_RATE(1152000000, 48, 1, 0),
+ PLL_RATE(1176000000, 49, 1, 0),
+ PLL_RATE(1200000000, 50, 1, 0),
+ PLL_RATE(1224000000, 51, 1, 0),
+ PLL_RATE(1248000000, 52, 1, 0),
+ PLL_RATE(1272000000, 53, 1, 0),
+ PLL_RATE(1296000000, 54, 1, 0),
+ PLL_RATE(1320000000, 55, 1, 0),
+ PLL_RATE(1344000000, 56, 1, 0),
+ PLL_RATE(1368000000, 57, 1, 0),
+ PLL_RATE(1392000000, 58, 1, 0),
+ PLL_RATE(1416000000, 59, 1, 0),
+ PLL_RATE(1440000000, 60, 1, 0),
+ PLL_RATE(1464000000, 61, 1, 0),
+ PLL_RATE(1488000000, 62, 1, 0),
+ PLL_RATE(1512000000, 63, 1, 0),
+ PLL_RATE(1536000000, 64, 1, 0),
+ PLL_RATE(1560000000, 65, 1, 0),
+ PLL_RATE(1584000000, 66, 1, 0),
+ PLL_RATE(1608000000, 67, 1, 0),
+ PLL_RATE(1632000000, 68, 1, 0),
+ { /* sentinel */ },
+};
+
+struct pll_params_table axg_gp0_params_table[] = {
+ PLL_PARAM(HHI_GP0_PLL_CNTL, 0x40010250),
+ PLL_PARAM(HHI_GP0_PLL_CNTL1, 0xc084a000),
+ PLL_PARAM(HHI_GP0_PLL_CNTL2, 0xb75020be),
+ PLL_PARAM(HHI_GP0_PLL_CNTL3, 0x0a59a288),
+ PLL_PARAM(HHI_GP0_PLL_CNTL4, 0xc000004d),
+ PLL_PARAM(HHI_GP0_PLL_CNTL5, 0x00078000),
+};
+
+static struct meson_clk_pll axg_gp0_pll = {
+ .m = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .params = {
+ .params_table = axg_gp0_params_table,
+ .params_count = ARRAY_SIZE(axg_gp0_params_table),
+ .no_init_reset = true,
+ .reset_lock_loop = true,
+ },
+ .rate_table = axg_gp0_pll_rate_table,
+ .rate_count = ARRAY_SIZE(axg_gp0_pll_rate_table),
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "gp0_pll",
+ .ops = &meson_clk_pll_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ .flags = CLK_GET_RATE_NOCACHE,
+ },
+};
+
+
+static struct clk_fixed_factor axg_fclk_div2 = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div3 = {
+ .mult = 1,
+ .div = 3,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div3",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div4 = {
+ .mult = 1,
+ .div = 4,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div4",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div5 = {
+ .mult = 1,
+ .div = 5,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div5",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div7 = {
+ .mult = 1,
+ .div = 7,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div7",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll0 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 14,
+ .width = 1,
+ },
+ .ssen = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 25,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll0",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll1 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 14,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll1",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll2 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 14,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll2",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll3 = {
+ .sdm = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 12,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 11,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 2,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 0,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll3",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+/*
+ * FIXME The legacy composite clocks (e.g. clk81) are both PLL post-dividers
+ * and should be modeled with their respective PLLs via the forthcoming
+ * coordinated clock rates feature
+ */
+static u32 mux_table_clk81[] = { 0, 2, 3, 4, 5, 6, 7 };
+static const char * const clk81_parent_names[] = {
+ "xtal", "fclk_div7", "mpll1", "mpll2", "fclk_div4",
+ "fclk_div3", "fclk_div5"
+};
+
+static struct clk_mux axg_mpeg_clk_sel = {
+ .reg = (void *)HHI_MPEG_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 12,
+ .flags = CLK_MUX_READ_ONLY,
+ .table = mux_table_clk81,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpeg_clk_sel",
+ .ops = &clk_mux_ro_ops,
+ /*
+ * bits 14:12 selects from 8 possible parents:
+ * xtal, 1'b0 (wtf), fclk_div7, mpll_clkout1, mpll_clkout2,
+ * fclk_div4, fclk_div3, fclk_div5
+ */
+ .parent_names = clk81_parent_names,
+ .num_parents = ARRAY_SIZE(clk81_parent_names),
+ .flags = CLK_SET_RATE_NO_REPARENT,
+ },
+};
+
+static struct clk_divider axg_mpeg_clk_div = {
+ .reg = (void *)HHI_MPEG_CLK_CNTL,
+ .shift = 0,
+ .width = 7,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpeg_clk_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "mpeg_clk_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_gate axg_clk81 = {
+ .reg = (void *)HHI_MPEG_CLK_CNTL,
+ .bit_idx = 7,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "clk81",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "mpeg_clk_div" },
+ .num_parents = 1,
+ .flags = (CLK_SET_RATE_PARENT | CLK_IS_CRITICAL),
+ },
+};
+
+static const char * const axg_sd_emmc_clk0_parent_names[] = {
+ "xtal", "fclk_div2", "fclk_div3", "fclk_div5", "fclk_div7",
+
+ /*
+ * Following these parent clocks, we should also have had mpll2, mpll3
+ * and gp0_pll but these clocks are too precious to be used here. All
+ * the necessary rates for MMC and NAND operation can be acheived using
+ * xtal or fclk_div clocks
+ */
+};
+
+/* SDcard clock */
+static struct clk_mux axg_sd_emmc_b_clk0_sel = {
+ .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 25,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_b_clk0_sel",
+ .ops = &clk_mux_ops,
+ .parent_names = axg_sd_emmc_clk0_parent_names,
+ .num_parents = ARRAY_SIZE(axg_sd_emmc_clk0_parent_names),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_divider axg_sd_emmc_b_clk0_div = {
+ .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+ .shift = 16,
+ .width = 7,
+ .lock = &clk_lock,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_b_clk0_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "sd_emmc_b_clk0_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_gate axg_sd_emmc_b_clk0 = {
+ .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+ .bit_idx = 23,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sd_emmc_b_clk0",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "sd_emmc_b_clk0_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* EMMC/NAND clock */
+static struct clk_mux axg_sd_emmc_c_clk0_sel = {
+ .reg = (void *)HHI_NAND_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 9,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_c_clk0_sel",
+ .ops = &clk_mux_ops,
+ .parent_names = axg_sd_emmc_clk0_parent_names,
+ .num_parents = ARRAY_SIZE(axg_sd_emmc_clk0_parent_names),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_divider axg_sd_emmc_c_clk0_div = {
+ .reg = (void *)HHI_NAND_CLK_CNTL,
+ .shift = 0,
+ .width = 7,
+ .lock = &clk_lock,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_c_clk0_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "sd_emmc_c_clk0_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_gate axg_sd_emmc_c_clk0 = {
+ .reg = (void *)HHI_NAND_CLK_CNTL,
+ .bit_idx = 7,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sd_emmc_c_clk0",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "sd_emmc_c_clk0_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* Everything Else (EE) domain gates */
+static MESON_GATE(axg_ddr, HHI_GCLK_MPEG0, 0);
+static MESON_GATE(axg_audio_locker, HHI_GCLK_MPEG0, 2);
+static MESON_GATE(axg_mipi_dsi_host, HHI_GCLK_MPEG0, 3);
+static MESON_GATE(axg_isa, HHI_GCLK_MPEG0, 5);
+static MESON_GATE(axg_pl301, HHI_GCLK_MPEG0, 6);
+static MESON_GATE(axg_periphs, HHI_GCLK_MPEG0, 7);
+static MESON_GATE(axg_spicc_0, HHI_GCLK_MPEG0, 8);
+static MESON_GATE(axg_i2c, HHI_GCLK_MPEG0, 9);
+static MESON_GATE(axg_rng0, HHI_GCLK_MPEG0, 12);
+static MESON_GATE(axg_uart0, HHI_GCLK_MPEG0, 13);
+static MESON_GATE(axg_mipi_dsi_phy, HHI_GCLK_MPEG0, 14);
+static MESON_GATE(axg_spicc_1, HHI_GCLK_MPEG0, 15);
+static MESON_GATE(axg_pcie_a, HHI_GCLK_MPEG0, 16);
+static MESON_GATE(axg_pcie_b, HHI_GCLK_MPEG0, 17);
+static MESON_GATE(axg_hiu_reg, HHI_GCLK_MPEG0, 19);
+static MESON_GATE(axg_assist_misc, HHI_GCLK_MPEG0, 23);
+static MESON_GATE(axg_emmc_b, HHI_GCLK_MPEG0, 25);
+static MESON_GATE(axg_emmc_c, HHI_GCLK_MPEG0, 26);
+static MESON_GATE(axg_dma, HHI_GCLK_MPEG0, 27);
+static MESON_GATE(axg_spi, HHI_GCLK_MPEG0, 30);
+
+static MESON_GATE(axg_audio, HHI_GCLK_MPEG1, 0);
+static MESON_GATE(axg_eth_core, HHI_GCLK_MPEG1, 3);
+static MESON_GATE(axg_uart1, HHI_GCLK_MPEG1, 16);
+static MESON_GATE(axg_g2d, HHI_GCLK_MPEG1, 20);
+static MESON_GATE(axg_usb0, HHI_GCLK_MPEG1, 21);
+static MESON_GATE(axg_usb1, HHI_GCLK_MPEG1, 22);
+static MESON_GATE(axg_reset, HHI_GCLK_MPEG1, 23);
+static MESON_GATE(axg_usb_general, HHI_GCLK_MPEG1, 26);
+static MESON_GATE(axg_ahb_arb0, HHI_GCLK_MPEG1, 29);
+static MESON_GATE(axg_efuse, HHI_GCLK_MPEG1, 30);
+static MESON_GATE(axg_boot_rom, HHI_GCLK_MPEG1, 31);
+
+static MESON_GATE(axg_ahb_data_bus, HHI_GCLK_MPEG2, 1);
+static MESON_GATE(axg_ahb_ctrl_bus, HHI_GCLK_MPEG2, 2);
+static MESON_GATE(axg_usb1_to_ddr, HHI_GCLK_MPEG2, 8);
+static MESON_GATE(axg_usb0_to_ddr, HHI_GCLK_MPEG2, 9);
+static MESON_GATE(axg_mmc_pclk, HHI_GCLK_MPEG2, 11);
+static MESON_GATE(axg_vpu_intr, HHI_GCLK_MPEG2, 25);
+static MESON_GATE(axg_sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26);
+static MESON_GATE(axg_gic, HHI_GCLK_MPEG2, 30);
+
+/* Always On (AO) domain gates */
+
+static MESON_GATE(axg_ao_media_cpu, HHI_GCLK_AO, 0);
+static MESON_GATE(axg_ao_ahb_sram, HHI_GCLK_AO, 1);
+static MESON_GATE(axg_ao_ahb_bus, HHI_GCLK_AO, 2);
+static MESON_GATE(axg_ao_iface, HHI_GCLK_AO, 3);
+static MESON_GATE(axg_ao_i2c, HHI_GCLK_AO, 4);
+
+/* Array of all clocks provided by this provider */
+
+static struct clk_hw_onecell_data axg_hw_onecell_data = {
+ .hws = {
+ [CLKID_SYS_PLL] = &axg_sys_pll.hw,
+ [CLKID_FIXED_PLL] = &axg_fixed_pll.hw,
+ [CLKID_FCLK_DIV2] = &axg_fclk_div2.hw,
+ [CLKID_FCLK_DIV3] = &axg_fclk_div3.hw,
+ [CLKID_FCLK_DIV4] = &axg_fclk_div4.hw,
+ [CLKID_FCLK_DIV5] = &axg_fclk_div5.hw,
+ [CLKID_FCLK_DIV7] = &axg_fclk_div7.hw,
+ [CLKID_GP0_PLL] = &axg_gp0_pll.hw,
+ [CLKID_MPEG_SEL] = &axg_mpeg_clk_sel.hw,
+ [CLKID_MPEG_DIV] = &axg_mpeg_clk_div.hw,
+ [CLKID_CLK81] = &axg_clk81.hw,
+ [CLKID_MPLL0] = &axg_mpll0.hw,
+ [CLKID_MPLL1] = &axg_mpll1.hw,
+ [CLKID_MPLL2] = &axg_mpll2.hw,
+ [CLKID_MPLL3] = &axg_mpll3.hw,
+ [CLKID_DDR] = &axg_ddr.hw,
+ [CLKID_AUDIO_LOCKER] = &axg_audio_locker.hw,
+ [CLKID_MIPI_DSI_HOST] = &axg_mipi_dsi_host.hw,
+ [CLKID_ISA] = &axg_isa.hw,
+ [CLKID_PL301] = &axg_pl301.hw,
+ [CLKID_PERIPHS] = &axg_periphs.hw,
+ [CLKID_SPICC0] = &axg_spicc_0.hw,
+ [CLKID_I2C] = &axg_i2c.hw,
+ [CLKID_RNG0] = &axg_rng0.hw,
+ [CLKID_UART0] = &axg_uart0.hw,
+ [CLKID_MIPI_DSI_PHY] = &axg_mipi_dsi_phy.hw,
+ [CLKID_SPICC1] = &axg_spicc_1.hw,
+ [CLKID_PCIE_A] = &axg_pcie_a.hw,
+ [CLKID_PCIE_B] = &axg_pcie_b.hw,
+ [CLKID_HIU_IFACE] = &axg_hiu_reg.hw,
+ [CLKID_ASSIST_MISC] = &axg_assist_misc.hw,
+ [CLKID_SD_EMMC_B] = &axg_emmc_b.hw,
+ [CLKID_SD_EMMC_C] = &axg_emmc_c.hw,
+ [CLKID_DMA] = &axg_dma.hw,
+ [CLKID_SPI] = &axg_spi.hw,
+ [CLKID_AUDIO] = &axg_audio.hw,
+ [CLKID_ETH] = &axg_eth_core.hw,
+ [CLKID_UART1] = &axg_uart1.hw,
+ [CLKID_G2D] = &axg_g2d.hw,
+ [CLKID_USB0] = &axg_usb0.hw,
+ [CLKID_USB1] = &axg_usb1.hw,
+ [CLKID_RESET] = &axg_reset.hw,
+ [CLKID_USB] = &axg_usb_general.hw,
+ [CLKID_AHB_ARB0] = &axg_ahb_arb0.hw,
+ [CLKID_EFUSE] = &axg_efuse.hw,
+ [CLKID_BOOT_ROM] = &axg_boot_rom.hw,
+ [CLKID_AHB_DATA_BUS] = &axg_ahb_data_bus.hw,
+ [CLKID_AHB_CTRL_BUS] = &axg_ahb_ctrl_bus.hw,
+ [CLKID_USB1_DDR_BRIDGE] = &axg_usb1_to_ddr.hw,
+ [CLKID_USB0_DDR_BRIDGE] = &axg_usb0_to_ddr.hw,
+ [CLKID_MMC_PCLK] = &axg_mmc_pclk.hw,
+ [CLKID_VPU_INTR] = &axg_vpu_intr.hw,
+ [CLKID_SEC_AHB_AHB3_BRIDGE] = &axg_sec_ahb_ahb3_bridge.hw,
+ [CLKID_GIC] = &axg_gic.hw,
+ [CLKID_AO_MEDIA_CPU] = &axg_ao_media_cpu.hw,
+ [CLKID_AO_AHB_SRAM] = &axg_ao_ahb_sram.hw,
+ [CLKID_AO_AHB_BUS] = &axg_ao_ahb_bus.hw,
+ [CLKID_AO_IFACE] = &axg_ao_iface.hw,
+ [CLKID_AO_I2C] = &axg_ao_i2c.hw,
+ [CLKID_SD_EMMC_B_CLK0_SEL] = &axg_sd_emmc_b_clk0_sel.hw,
+ [CLKID_SD_EMMC_B_CLK0_DIV] = &axg_sd_emmc_b_clk0_div.hw,
+ [CLKID_SD_EMMC_B_CLK0] = &axg_sd_emmc_b_clk0.hw,
+ [CLKID_SD_EMMC_C_CLK0_SEL] = &axg_sd_emmc_c_clk0_sel.hw,
+ [CLKID_SD_EMMC_C_CLK0_DIV] = &axg_sd_emmc_c_clk0_div.hw,
+ [CLKID_SD_EMMC_C_CLK0] = &axg_sd_emmc_c_clk0.hw,
+ [NR_CLKS] = NULL,
+ },
+ .num = NR_CLKS,
+};
+
+/* Convenience tables to populate base addresses in .probe */
+
+static struct meson_clk_pll *const axg_clk_plls[] = {
+ &axg_fixed_pll,
+ &axg_sys_pll,
+ &axg_gp0_pll,
+};
+
+static struct meson_clk_mpll *const axg_clk_mplls[] = {
+ &axg_mpll0,
+ &axg_mpll1,
+ &axg_mpll2,
+ &axg_mpll3,
+};
+
+static struct clk_gate *const axg_clk_gates[] = {
+ &axg_clk81,
+ &axg_ddr,
+ &axg_audio_locker,
+ &axg_mipi_dsi_host,
+ &axg_isa,
+ &axg_pl301,
+ &axg_periphs,
+ &axg_spicc_0,
+ &axg_i2c,
+ &axg_rng0,
+ &axg_uart0,
+ &axg_mipi_dsi_phy,
+ &axg_spicc_1,
+ &axg_pcie_a,
+ &axg_pcie_b,
+ &axg_hiu_reg,
+ &axg_assist_misc,
+ &axg_emmc_b,
+ &axg_emmc_c,
+ &axg_dma,
+ &axg_spi,
+ &axg_audio,
+ &axg_eth_core,
+ &axg_uart1,
+ &axg_g2d,
+ &axg_usb0,
+ &axg_usb1,
+ &axg_reset,
+ &axg_usb_general,
+ &axg_ahb_arb0,
+ &axg_efuse,
+ &axg_boot_rom,
+ &axg_ahb_data_bus,
+ &axg_ahb_ctrl_bus,
+ &axg_usb1_to_ddr,
+ &axg_usb0_to_ddr,
+ &axg_mmc_pclk,
+ &axg_vpu_intr,
+ &axg_sec_ahb_ahb3_bridge,
+ &axg_gic,
+ &axg_ao_media_cpu,
+ &axg_ao_ahb_sram,
+ &axg_ao_ahb_bus,
+ &axg_ao_iface,
+ &axg_ao_i2c,
+ &axg_sd_emmc_b_clk0,
+ &axg_sd_emmc_c_clk0,
+};
+
+static struct clk_mux *const axg_clk_muxes[] = {
+ &axg_mpeg_clk_sel,
+ &axg_sd_emmc_b_clk0_sel,
+ &axg_sd_emmc_c_clk0_sel,
+};
+
+static struct clk_divider *const axg_clk_dividers[] = {
+ &axg_mpeg_clk_div,
+ &axg_sd_emmc_b_clk0_div,
+ &axg_sd_emmc_c_clk0_div,
+};
+
+struct clkc_data {
+ struct clk_gate *const *clk_gates;
+ unsigned int clk_gates_count;
+ struct meson_clk_mpll *const *clk_mplls;
+ unsigned int clk_mplls_count;
+ struct meson_clk_pll *const *clk_plls;
+ unsigned int clk_plls_count;
+ struct clk_mux *const *clk_muxes;
+ unsigned int clk_muxes_count;
+ struct clk_divider *const *clk_dividers;
+ unsigned int clk_dividers_count;
+ struct clk_hw_onecell_data *hw_onecell_data;
+};
+
+static const struct clkc_data axg_clkc_data = {
+ .clk_gates = axg_clk_gates,
+ .clk_gates_count = ARRAY_SIZE(axg_clk_gates),
+ .clk_mplls = axg_clk_mplls,
+ .clk_mplls_count = ARRAY_SIZE(axg_clk_mplls),
+ .clk_plls = axg_clk_plls,
+ .clk_plls_count = ARRAY_SIZE(axg_clk_plls),
+ .clk_muxes = axg_clk_muxes,
+ .clk_muxes_count = ARRAY_SIZE(axg_clk_muxes),
+ .clk_dividers = axg_clk_dividers,
+ .clk_dividers_count = ARRAY_SIZE(axg_clk_dividers),
+ .hw_onecell_data = &axg_hw_onecell_data,
+};
+
+static const struct of_device_id clkc_match_table[] = {
+ { .compatible = "amlogic,axg-clkc", .data = &axg_clkc_data },
+ {}
+};
+
+static int axg_clkc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct clkc_data *clkc_data;
+ struct resource *res;
+ void __iomem *clk_base;
+ int ret, clkid, i;
+
+ clkc_data = of_device_get_match_data(&pdev->dev);
+ if (!clkc_data)
+ return -EINVAL;
+
+ /* Generic clocks and PLLs */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ clk_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (IS_ERR(clk_base)) {
+ dev_err(&pdev->dev, "Unable to map clk base\n");
+ return -ENXIO;
+ }
+
+ /* Populate base address for PLLs */
+ for (i = 0; i < clkc_data->clk_plls_count; i++)
+ clkc_data->clk_plls[i]->base = clk_base;
+
+ /* Populate base address for MPLLs */
+ for (i = 0; i < clkc_data->clk_mplls_count; i++)
+ clkc_data->clk_mplls[i]->base = clk_base;
+
+ /* Populate base address for gates */
+ for (i = 0; i < clkc_data->clk_gates_count; i++)
+ clkc_data->clk_gates[i]->reg = clk_base +
+ (u64)clkc_data->clk_gates[i]->reg;
+
+ /* Populate base address for muxes */
+ for (i = 0; i < clkc_data->clk_muxes_count; i++)
+ clkc_data->clk_muxes[i]->reg = clk_base +
+ (u64)clkc_data->clk_muxes[i]->reg;
+
+ /* Populate base address for dividers */
+ for (i = 0; i < clkc_data->clk_dividers_count; i++)
+ clkc_data->clk_dividers[i]->reg = clk_base +
+ (u64)clkc_data->clk_dividers[i]->reg;
+
+ for (clkid = 0; clkid < clkc_data->hw_onecell_data->num; clkid++) {
+ /* array might be sparse */
+ if (!clkc_data->hw_onecell_data->hws[clkid])
+ continue;
+
+ ret = devm_clk_hw_register(dev,
+ clkc_data->hw_onecell_data->hws[clkid]);
+ if (ret) {
+ dev_err(&pdev->dev, "Clock registration failed\n");
+ return ret;
+ }
+ }
+
+ return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+ clkc_data->hw_onecell_data);
+}
+
+static struct platform_driver axg_driver = {
+ .probe = axg_clkc_probe,
+ .driver = {
+ .name = "axg-clkc",
+ .of_match_table = clkc_match_table,
+ },
+};
+
+builtin_platform_driver(axg_driver);
diff --git a/drivers/clk/meson/axg.h b/drivers/clk/meson/axg.h
new file mode 100644
index 000000000000..ce0bafdb6b28
--- /dev/null
+++ b/drivers/clk/meson/axg.h
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2016 AmLogic, Inc.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2017 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ *
+ */
+#ifndef __AXG_H
+#define __AXG_H
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet must be multiplied by 4 before
+ * adding them to the base address to get the right value.
+ */
+#define HHI_GP0_PLL_CNTL 0x40
+#define HHI_GP0_PLL_CNTL2 0x44
+#define HHI_GP0_PLL_CNTL3 0x48
+#define HHI_GP0_PLL_CNTL4 0x4c
+#define HHI_GP0_PLL_CNTL5 0x50
+#define HHI_GP0_PLL_STS 0x54
+#define HHI_GP0_PLL_CNTL1 0x58
+#define HHI_HIFI_PLL_CNTL 0x80
+#define HHI_HIFI_PLL_CNTL2 0x84
+#define HHI_HIFI_PLL_CNTL3 0x88
+#define HHI_HIFI_PLL_CNTL4 0x8C
+#define HHI_HIFI_PLL_CNTL5 0x90
+#define HHI_HIFI_PLL_STS 0x94
+#define HHI_HIFI_PLL_CNTL1 0x98
+
+#define HHI_XTAL_DIVN_CNTL 0xbc
+#define HHI_GCLK2_MPEG0 0xc0
+#define HHI_GCLK2_MPEG1 0xc4
+#define HHI_GCLK2_MPEG2 0xc8
+#define HHI_GCLK2_OTHER 0xd0
+#define HHI_GCLK2_AO 0xd4
+#define HHI_PCIE_PLL_CNTL 0xd8
+#define HHI_PCIE_PLL_CNTL1 0xdC
+#define HHI_PCIE_PLL_CNTL2 0xe0
+#define HHI_PCIE_PLL_CNTL3 0xe4
+#define HHI_PCIE_PLL_CNTL4 0xe8
+#define HHI_PCIE_PLL_CNTL5 0xec
+#define HHI_PCIE_PLL_CNTL6 0xf0
+#define HHI_PCIE_PLL_STS 0xf4
+
+#define HHI_MEM_PD_REG0 0x100
+#define HHI_VPU_MEM_PD_REG0 0x104
+#define HHI_VIID_CLK_DIV 0x128
+#define HHI_VIID_CLK_CNTL 0x12c
+
+#define HHI_GCLK_MPEG0 0x140
+#define HHI_GCLK_MPEG1 0x144
+#define HHI_GCLK_MPEG2 0x148
+#define HHI_GCLK_OTHER 0x150
+#define HHI_GCLK_AO 0x154
+#define HHI_SYS_CPU_CLK_CNTL1 0x15c
+#define HHI_SYS_CPU_RESET_CNTL 0x160
+#define HHI_VID_CLK_DIV 0x164
+#define HHI_SPICC_HCLK_CNTL 0x168
+
+#define HHI_MPEG_CLK_CNTL 0x174
+#define HHI_VID_CLK_CNTL 0x17c
+#define HHI_TS_CLK_CNTL 0x190
+#define HHI_VID_CLK_CNTL2 0x194
+#define HHI_SYS_CPU_CLK_CNTL0 0x19c
+#define HHI_VID_PLL_CLK_DIV 0x1a0
+#define HHI_VPU_CLK_CNTL 0x1bC
+
+#define HHI_VAPBCLK_CNTL 0x1F4
+
+#define HHI_GEN_CLK_CNTL 0x228
+
+#define HHI_VDIN_MEAS_CLK_CNTL 0x250
+#define HHI_NAND_CLK_CNTL 0x25C
+#define HHI_SD_EMMC_CLK_CNTL 0x264
+
+#define HHI_MPLL_CNTL 0x280
+#define HHI_MPLL_CNTL2 0x284
+#define HHI_MPLL_CNTL3 0x288
+#define HHI_MPLL_CNTL4 0x28C
+#define HHI_MPLL_CNTL5 0x290
+#define HHI_MPLL_CNTL6 0x294
+#define HHI_MPLL_CNTL7 0x298
+#define HHI_MPLL_CNTL8 0x29C
+#define HHI_MPLL_CNTL9 0x2A0
+#define HHI_MPLL_CNTL10 0x2A4
+
+#define HHI_MPLL3_CNTL0 0x2E0
+#define HHI_MPLL3_CNTL1 0x2E4
+#define HHI_PLL_TOP_MISC 0x2E8
+
+#define HHI_SYS_PLL_CNTL1 0x2FC
+#define HHI_SYS_PLL_CNTL 0x300
+#define HHI_SYS_PLL_CNTL2 0x304
+#define HHI_SYS_PLL_CNTL3 0x308
+#define HHI_SYS_PLL_CNTL4 0x30c
+#define HHI_SYS_PLL_CNTL5 0x310
+#define HHI_SYS_PLL_STS 0x314
+#define HHI_DPLL_TOP_I 0x318
+#define HHI_DPLL_TOP2_I 0x31C
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_MPEG_SEL 8
+#define CLKID_MPEG_DIV 9
+#define CLKID_SD_EMMC_B_CLK0_SEL 61
+#define CLKID_SD_EMMC_B_CLK0_DIV 62
+#define CLKID_SD_EMMC_C_CLK0_SEL 63
+#define CLKID_SD_EMMC_C_CLK0_DIV 64
+
+#define NR_CLKS 65
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/axg-clkc.h>
+
+#endif /* __AXG_H */
--
2.15.1
^ permalink raw reply related
* [PATCH v6 2/6] clk: meson-axg: add clocks dt-bindings required header
From: Yixun Lan @ 2017-12-11 6:48 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman
Cc: Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
Carlo Caione, Yixun Lan, Qiufang Dai, Jian Hu, linux-amlogic,
devicetree, linux-clk, linux-arm-kernel, linux-kernel
In-Reply-To: <20171211064853.32111-1-yixun.lan@amlogic.com>
From: Qiufang Dai <qiufang.dai@amlogic.com>
Add the required header for the clocks ID dt-bindings
exported from various subsystem in the Meson-AXG SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
include/dt-bindings/clock/axg-clkc.h | 71 ++++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
create mode 100644 include/dt-bindings/clock/axg-clkc.h
diff --git a/include/dt-bindings/clock/axg-clkc.h b/include/dt-bindings/clock/axg-clkc.h
new file mode 100644
index 000000000000..941ac70e7f30
--- /dev/null
+++ b/include/dt-bindings/clock/axg-clkc.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Meson-AXG clock tree IDs
+ *
+ * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __AXG_CLKC_H
+#define __AXG_CLKC_H
+
+#define CLKID_SYS_PLL 0
+#define CLKID_FIXED_PLL 1
+#define CLKID_FCLK_DIV2 2
+#define CLKID_FCLK_DIV3 3
+#define CLKID_FCLK_DIV4 4
+#define CLKID_FCLK_DIV5 5
+#define CLKID_FCLK_DIV7 6
+#define CLKID_GP0_PLL 7
+#define CLKID_CLK81 10
+#define CLKID_MPLL0 11
+#define CLKID_MPLL1 12
+#define CLKID_MPLL2 13
+#define CLKID_MPLL3 14
+#define CLKID_DDR 15
+#define CLKID_AUDIO_LOCKER 16
+#define CLKID_MIPI_DSI_HOST 17
+#define CLKID_ISA 18
+#define CLKID_PL301 19
+#define CLKID_PERIPHS 20
+#define CLKID_SPICC0 21
+#define CLKID_I2C 22
+#define CLKID_RNG0 23
+#define CLKID_UART0 24
+#define CLKID_MIPI_DSI_PHY 25
+#define CLKID_SPICC1 26
+#define CLKID_PCIE_A 27
+#define CLKID_PCIE_B 28
+#define CLKID_HIU_IFACE 29
+#define CLKID_ASSIST_MISC 30
+#define CLKID_SD_EMMC_B 31
+#define CLKID_SD_EMMC_C 32
+#define CLKID_DMA 33
+#define CLKID_SPI 34
+#define CLKID_AUDIO 35
+#define CLKID_ETH 36
+#define CLKID_UART1 37
+#define CLKID_G2D 38
+#define CLKID_USB0 39
+#define CLKID_USB1 40
+#define CLKID_RESET 41
+#define CLKID_USB 42
+#define CLKID_AHB_ARB0 43
+#define CLKID_EFUSE 44
+#define CLKID_BOOT_ROM 45
+#define CLKID_AHB_DATA_BUS 46
+#define CLKID_AHB_CTRL_BUS 47
+#define CLKID_USB1_DDR_BRIDGE 48
+#define CLKID_USB0_DDR_BRIDGE 49
+#define CLKID_MMC_PCLK 50
+#define CLKID_VPU_INTR 51
+#define CLKID_SEC_AHB_AHB3_BRIDGE 52
+#define CLKID_GIC 53
+#define CLKID_AO_MEDIA_CPU 54
+#define CLKID_AO_AHB_SRAM 55
+#define CLKID_AO_AHB_BUS 56
+#define CLKID_AO_IFACE 57
+#define CLKID_AO_I2C 58
+#define CLKID_SD_EMMC_B_CLK0 59
+#define CLKID_SD_EMMC_C_CLK0 60
+
+#endif /* __AXG_CLKC_H */
--
2.15.1
^ permalink raw reply related
* [PATCH v6 1/6] dt-bindings: clock: add compatible variant for the Meson-AXG
From: Yixun Lan @ 2017-12-11 6:48 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman
Cc: Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
Carlo Caione, Yixun Lan, Qiufang Dai, Jian Hu, linux-amlogic,
devicetree, linux-clk, linux-arm-kernel, linux-kernel
In-Reply-To: <20171211064853.32111-1-yixun.lan@amlogic.com>
Update the documentation to support clock driver for the Amlogic's
Meson-AXG SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index 924040769186..e2b377ed6f91 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -5,8 +5,11 @@ controllers within the SoC.
Required Properties:
-- compatible: should be "amlogic,gxbb-clkc" for GXBB SoC,
- or "amlogic,gxl-clkc" for GXL and GXM SoC.
+- compatible: should be:
+ "amlogic,gxbb-clkc" for GXBB SoC,
+ "amlogic,gxl-clkc" for GXL and GXM SoC,
+ "amlogic,axg-clkc" for AXG SoC.
+
- reg: physical base address of the clock controller and length of memory
mapped region.
--
2.15.1
^ permalink raw reply related
* [PATCH v6 0/6] add clk controller driver for Meson-AXG SoC
From: Yixun Lan @ 2017-12-11 6:48 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman
Cc: Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
Carlo Caione, Yixun Lan, Qiufang Dai, Jian Hu,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Add driver for the clk controller which found in Meson AXG SoC
Note, we deliberately create a seperate source file for the Meson AXG
series, instead of sharing code with previous GXBB/GXL - the file axg.c
It would help us maintaining the code more easily.
Changes since v5 [5]:
- add Rob's Ack for patch 2, add Neil's Ack for patch 3
- include spinlock' name change patch, patch 4
- include uart_ao clock DTS patch
Changes since v4 [4]:
- use devm_ioremap instead of devm_ioremap_resource
- rename DT node using generic name 'bus'
Changes since v3 [3]:
- separate dt-bindings header file
- adjust license note as standard way
- replace of_iomap with platform/devm API
- add Rob's Ack to Patch 1,4
Changes since v2 [2]:
- drop register offset calculation
- update dt-bindings for new compatible variant
Changes since v1 [1]:
- rework register definion, use '(offset << 2)' to better match
the description from data sheet
- drop "#include dt-bindings/clock/gxbb-aoclkc.h" from dts
- rebase code to v4.15-rc1
[5]
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005655.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005656.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005657.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005658.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005659.html
[4]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005522.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005525.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005526.html
[3]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005487.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005488.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005489.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005490.html
[2]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005468.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005469.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005470.html
[1]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005239.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005240.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005241.html
Qiufang Dai (3):
clk: meson-axg: add clocks dt-bindings required header
clk: meson-axg: add clock controller drivers
arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
Yixun Lan (3):
dt-bindings: clock: add compatible variant for the Meson-AXG
clk: meson: make the spinlock naming more specific
arm64: dts: meson-axg: switch uart_ao clock to CLK81
.../bindings/clock/amlogic,gxbb-clkc.txt | 7 +-
arch/arm64/Kconfig.platforms | 1 +
arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 2 +
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 19 +-
drivers/clk/meson/Kconfig | 8 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/axg.c | 944 +++++++++++++++++++++
drivers/clk/meson/axg.h | 126 +++
drivers/clk/meson/clkc.h | 2 +-
drivers/clk/meson/gxbb.c | 112 +--
drivers/clk/meson/meson8b.c | 24 +-
include/dt-bindings/clock/axg-clkc.h | 71 ++
12 files changed, 1242 insertions(+), 75 deletions(-)
create mode 100644 drivers/clk/meson/axg.c
create mode 100644 drivers/clk/meson/axg.h
create mode 100644 include/dt-bindings/clock/axg-clkc.h
--
2.15.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH 20/20] ARM: dts: aspeed-plametto: Add flash layout
From: Joel Stanley @ 2017-12-11 5:07 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
The OpenBMC flash layout is used by Palmetto systems.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index a8f0c046e83e..cc18137386f2 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -34,6 +34,7 @@
status = "okay";
m25p,fast-read;
label = "bmc";
+#include "openbmc-flash-layout.dtsi"
};
};
--
2.14.1
^ permalink raw reply related
* [PATCH 19/20] ARM: dts: aspeed-romulus: Update Romulus system
From: Joel Stanley @ 2017-12-11 5:07 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
- Fix incorrect RAM size
- Remove alias; these are now specified in the dtsi
- Add newly upstreamed devices
- Include OpenBMC flash layout
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 155 +++++++++++++++++++++++++--
1 file changed, 149 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index 8067793129ea..bfdf643584df 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
/dts-v1/;
#include "aspeed-g5.dtsi"
@@ -7,17 +7,13 @@
model = "Romulus BMC";
compatible = "ibm,romulus-bmc", "aspeed,ast2500";
- aliases {
- serial4 = &uart5;
- };
-
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200 earlyprintk";
};
memory {
- reg = <0x80000000 0x40000000>;
+ reg = <0x80000000 0x20000000>;
};
reserved-memory {
@@ -29,6 +25,73 @@
no-map;
reg = <0xbf000000 0x01000000>; /* 16M */
};
+
+ flash_memory: region@98000000 {
+ no-map;
+ reg = <0x98000000 0x04000000>; /* 64M */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ fault {
+ gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ identify {
+ gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+ };
+
+ power {
+ gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ fsi: gpio-fsi {
+ compatible = "fsi-master-gpio", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ checkstop {
+ label = "checkstop";
+ gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(J, 2)>;
+ };
+ };
+};
+
+&fmc {
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
};
};
@@ -38,6 +101,7 @@
status = "okay";
m25p,fast-read;
label = "bmc";
+#include "openbmc-flash-layout.dtsi"
};
};
@@ -53,6 +117,12 @@
};
};
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
&uart1 {
/* Rear RS-232 connector */
status = "okay";
@@ -81,6 +151,10 @@
pinctrl-0 = <&pinctrl_rmii1_default>;
};
+&i2c1 {
+ status = "okay";
+};
+
&i2c2 {
status = "okay";
};
@@ -133,8 +207,77 @@
&i2c12 {
status = "okay";
+
+ max31785@52 {
+ compatible = "maxim,max31785";
+ reg = <0x52>;
+ };
+};
+
+&gpio {
+ nic_func_mode0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "nic_func_mode0";
+ };
+ nic_func_mode1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "nic_func_mode1";
+ };
};
&vuart {
status = "okay";
};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+ };
+
+ fan@1 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+ };
+
+ fan@2 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+ };
+
+ fan@3 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+ };
+
+ fan@4 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+ };
+
+ fan@5 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+ };
+
+ fan@6 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+ };
+};
--
2.14.1
^ permalink raw reply related
* [PATCH 18/20] ARM: dts: aspeed: Add Qanta Q71L BMC machine
From: Joel Stanley @ 2017-12-11 5:07 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Rick Altherr, Cédric Le Goater, Benjamin Herrenschmidt,
Jeremy Kerr, devicetree, linux-arm-kernel, linux-kernel,
linux-aspeed, Peter Hanson
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
From: Rick Altherr <raltherr@google.com>
The Qanta Q71L BMC is an ASPEED ast2400 based BMC that is part of a
Qanta x86 server.
This adds the device tree description for most upstream components. It
is a squashed commit from the OpenBMC kernel tree.
Signed-off-by: Peter Hanson <peterh@google.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Rick Altherr <raltherr@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts | 458 +++++++++++++++++++++++++++
2 files changed, 460 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 48c55f307aa9..5ab5d9169511 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1106,5 +1106,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-opp-palmetto.dtb \
aspeed-bmc-opp-romulus.dtb \
aspeed-bmc-opp-witherspoon.dtb \
- aspeed-bmc-opp-zaius.dtb
+ aspeed-bmc-opp-zaius.dtb \
+ aspeed-bmc-quanta-q71l.dtb
endif
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
new file mode 100644
index 000000000000..2f40bab63149
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
@@ -0,0 +1,458 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+
+/ {
+ model = "Quanta Q71L BMC";
+ compatible = "quanta,q71l-bmc", "aspeed,ast2400";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory {
+ reg = <0x40000000 0x8000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@47800000 {
+ no-map;
+ reg = <0x47800000 0x00800000>; /* 8MB */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ power {
+ gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ identify {
+ gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 11>;
+ };
+
+ i2c1mux: i2cmux {
+ compatible = "i2c-mux-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* mux-gpios = <&sgpio 10 GPIO_ACTIVE_HIGH> */
+ i2c-parent = <&i2c1>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default
+ &pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ /* temp2 inlet */
+ tmp75@4c {
+ compatible = "ti,tmp75";
+ reg = <0x4c>;
+ };
+
+ /* temp3 */
+ tmp75@4e {
+ compatible = "ti,tmp75";
+ reg = <0x4e>;
+ };
+
+ /* temp1 */
+ tmp75@4f {
+ compatible = "ti,tmp75";
+ reg = <0x4f>;
+ };
+
+ /* Baseboard FRU */
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ };
+
+ /* FP FRU */
+ eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ /* 0: PCIe Slot 2,
+ * Slot 3,
+ * Slot 6,
+ * Slot 7
+ */
+ i2c-switch@74 {
+ compatible = "nxp,pca9546";
+ reg = <0x74>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect; /* may use mux@77 next. */
+
+ i2c_pcie2: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c_pcie3: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c_pcie6: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c_pcie7: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ /* 0: PCIe Slot 1,
+ * Slot 4,
+ * Slot 5,
+ * Slot 8,
+ * Slot 9,
+ * Slot 10,
+ * SSD 1,
+ * SSD 2
+ */
+ i2c-switch@77 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+ i2c-mux-idle-disconnect; /* may use mux@74 next. */
+
+ i2c_pcie1: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c_pcie4: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c_pcie5: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c_pcie8: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c_pcie9: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ i2c_pcie10: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c_ssd1: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ i2c_ssd2: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ /* BIOS FRU */
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+
+ /* 0: PSU4
+ * PSU1
+ * PSU3
+ * PSU2
+ */
+ i2c-switch@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c_psu4: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c_psu1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c_psu3: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c_psu2: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ /* PDB FRU */
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ /* BMC FRU */
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&vuart {
+ status = "okay";
+};
+
+&wdt2 {
+ status = "okay";
+};
+
+&pwm_tacho {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm1_default
+ &pinctrl_pwm2_default
+ &pinctrl_pwm3_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan@4 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+
+ fan@5 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+ };
+
+ fan@6 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+ };
+
+ fan@7 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+ };
+};
+
+&i2c1mux {
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Memory Riser 1 FRU */
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+
+ /* Memory Riser 2 FRU */
+ eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ };
+
+ /* Memory Riser 3 FRU */
+ eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ };
+
+ /* Memory Riser 4 FRU */
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ };
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Memory Riser 5 FRU */
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+
+ /* Memory Riser 6 FRU */
+ eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ };
+
+ /* Memory Riser 7 FRU */
+ eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ };
+
+ /* Memory Riser 8 FRU */
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ };
+ };
+};
--
2.14.1
^ permalink raw reply related
* [PATCH 17/20] ARM: dts: aspeed: Add Ingrasys Zaius BMC machine
From: Joel Stanley @ 2017-12-11 5:07 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed,
Robert Lippert, Peter Hanson, Rick Altherr
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
From: Xo Wang <xow@google.com>
Zaius is a POWER9 platform announced at OpenPOWER Summit 2016. This adds
basic DTS support for its AST2500 BMC.
This adds the device tree description for most upstream components. It
is a squashed commit of all of the patches from the OpenBMC kernel tree.
Signed-off-by: Xo Wang <xow@google.com>
Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Robert Lippert <rlippert@google.com>
Signed-off-by: Peter Hanson <peterh@google.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Rick Altherr <raltherr@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/Makefile | 4 +-
arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 427 +++++++++++++++++++++++++++++
2 files changed, 429 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 15a9207319c1..48c55f307aa9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1105,6 +1105,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
aspeed-bmc-opp-palmetto.dtb \
aspeed-bmc-opp-romulus.dtb \
- aspeed-bmc-opp-witherspoon.dtb
-
+ aspeed-bmc-opp-witherspoon.dtb \
+ aspeed-bmc-opp-zaius.dtb
endif
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
new file mode 100644
index 000000000000..90d77012495d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Zaius BMC";
+ compatible = "ingrasys,zaius-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flash_memory: region@98000000 {
+ no-map;
+ reg = <0x98000000 0x04000000>; /* 64M */
+ };
+ };
+
+ onewire0 {
+ compatible = "w1-gpio";
+ gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+ };
+
+ onewire1 {
+ compatible = "w1-gpio";
+ gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ };
+
+ onewire2 {
+ compatible = "w1-gpio";
+ gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ onewire3 {
+ compatible = "w1-gpio";
+ gpios = <&gpio ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ checkstop {
+ label = "checkstop";
+ gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 7)>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ sys_boot_status {
+ label = "System boot status";
+ gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_LOW>;
+ };
+
+ attention {
+ label = "Attention";
+ gpios = <&gpio ASPEED_GPIO(D, 6) GPIO_ACTIVE_LOW>;
+ };
+
+ plt_fault {
+ label = "Platform fault";
+ gpios = <&gpio ASPEED_GPIO(D, 7) GPIO_ACTIVE_LOW>;
+ };
+
+ hdd_fault {
+ label = "Onboard drive fault";
+ gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ fsi: gpio-fsi {
+ compatible = "fsi-master-gpio", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ trans-gpios = <&gpio ASPEED_GPIO(O, 6) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ clock-gpios = <&gpio ASPEED_GPIO(G, 0) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(G, 1) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(P, 6) GPIO_ACTIVE_HIGH>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 13>, <&adc 14>, <&adc 15>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 12>;
+ };
+
+};
+
+&fmc {
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
+ };
+};
+
+&spi2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2ck_default
+ &pinctrl_spi2cs0_default
+ &pinctrl_spi2cs1_default
+ &pinctrl_spi2miso_default
+ &pinctrl_spi2mosi_default>;
+
+ flash@0 {
+ status = "okay";
+ };
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default>;
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+
+ rtc@68 {
+ compatible = "nxp,pcf8523";
+ reg = <0x68>;
+ };
+
+ ucd90160@64 {
+ compatible = "ti,ucd90160";
+ reg = <0x64>;
+ };
+
+ /* Power sequencer UCD90160 PMBUS @64h
+ * FRU AT24C64D @50h
+ * RTC PCF8523 @68h
+ * Clock buffer 9DBL04 @6dh
+ */
+};
+
+&i2c1 {
+ status = "okay";
+
+ i2c-switch@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* MUX1 PCA9546A @71h
+ * PCIe 0
+ * PCIe 1
+ * PCIe 2
+ * TPM header
+ */
+};
+
+&i2c2 {
+ status = "disabled";
+
+ /* OCP Mezz Connector A (OOB SMBUS) */
+};
+
+&i2c3 {
+ status = "disabled";
+
+ /* OCP Mezz Connector A (PCIe slot SMBUS) */
+};
+
+&i2c4 {
+ status = "okay";
+
+ i2c-switch@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* MUX1 PCA9546A @71h
+ * PCIe 3
+ * PCIe 4
+ */
+};
+
+
+&i2c5 {
+ status = "disabled";
+
+ /* CPU0 PRM 0.7V */
+ /* CPU0 PRM 1.2V CH03 */
+ /* CPU0 PRM 0.8V */
+ /* CPU0 PRM 1.2V CH47 */
+};
+
+&i2c6 {
+ status = "disabled";
+
+ /* CPU1 PRM 0.7V */
+ /* CPU1 PRM 1.2V CH03 */
+ /* CPU1 PRM 0.8V */
+ /* CPU1 PRM 1.2V CH47 */
+};
+
+&i2c7 {
+ status = "okay";
+
+ pca9541a@70 {
+ compatible = "nxp,pca9541";
+ reg = <0x70>;
+
+ i2c-arb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hotswap@54 {
+ compatible = "ti,lm5066i";
+ reg = <0x54>;
+ };
+ };
+ };
+
+ /* Master selector PCA9541A @70h (other master: CPU0)
+ * LM5066I PMBUS @10h
+ */
+
+ /* 12V Quarter Brick DC/DC Converter Q54SJ12050 @61h */
+ power-brick@61 {
+ compatible = "delta,dps800";
+ reg = <0x61>;
+ };
+
+ /* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */
+ /* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */
+ /* CPU0 VR ISL68137 0.8V PMBUS @60h */
+ /* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @41h */
+ /* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */
+};
+
+&i2c8 {
+ status = "okay";
+
+ /* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @65h */
+ /* CPU1 VR ISL68137 1.2V CH03 PMBUS @44h */
+ /* CPU1 VR ISL68137 0.8V PMBUS @61h */
+ /* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */
+ /* CPU0 VR ISL68137 1.2V CH47 PMBUS @45h */
+};
+
+
+&i2c9 {
+ status = "disabled";
+
+ /* Fan board */
+};
+
+&i2c10 {
+ status = "disabled";
+};
+
+&i2c11 {
+ status = "disabled";
+
+ /* GPU sideband */
+};
+
+&i2c12 {
+ status = "disabled";
+};
+
+&i2c13 {
+ status = "disabled";
+
+ /* MUX PI3USB102
+ * CPU0 debug
+ * CPU1 debug
+ */
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+
+ pinctrl_gpioh_unbiased: gpioi_unbiased {
+ pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7";
+ bias-disable;
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpioh_unbiased>;
+
+ line_iso_u146_en {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "iso_u164_en";
+ };
+
+ ncsi_mux_en_n {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "ncsi_mux_en_n";
+ };
+
+ line_bmc_i2c2_sw_rst_n {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "bmc_i2c2_sw_rst_n";
+ };
+
+ line_bmc_i2c5_sw_rst_n {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "bmc_i2c5_sw_rst_n";
+ };
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+};
--
2.14.1
^ permalink raw reply related
* [PATCH 16/20] ARM: dts: aspeed: Add Witherspoon BMC machine
From: Joel Stanley @ 2017-12-11 5:07 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed,
Brandon Wyman, Matt Spinler, Brad Bishop, Edward A . James
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
The Witherspoon BMC is an ASPEED ast2500 based BMC that is part of an
OpenPower Power9 server.
This adds the device tree description for most upstream components. It
is a squashed commit from the OpenBMC kernel tree.
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Signed-off-by: Edward A. James <eajames@us.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/Makefile | 4 +-
arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts | 547 +++++++++++++++++++++++
2 files changed, 550 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5d1e9d37bf3a..15a9207319c1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1104,5 +1104,7 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
aspeed-bmc-opp-palmetto.dtb \
- aspeed-bmc-opp-romulus.dtb
+ aspeed-bmc-opp-romulus.dtb \
+ aspeed-bmc-opp-witherspoon.dtb
+
endif
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
new file mode 100644
index 000000000000..9a0937512e5b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -0,0 +1,547 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "Witherspoon BMC";
+ compatible = "ibm,witherspoon-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flash_memory: region@98000000 {
+ no-map;
+ reg = <0x98000000 0x04000000>; /* 64M */
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <1000>;
+
+ fan0-presence {
+ label = "fan0-presence";
+ gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+ linux,code = <4>;
+ };
+
+ fan1-presence {
+ label = "fan1-presence";
+ gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+ linux,code = <5>;
+ };
+
+ fan2-presence {
+ label = "fan2-presence";
+ gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+ linux,code = <6>;
+ };
+
+ fan3-presence {
+ label = "fan3-presence";
+ gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <7>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ fan0 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
+ };
+
+ fan1 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+ };
+
+ fan2 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
+ };
+
+ fan3 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
+ };
+
+ front-fault {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ front-power {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ front-id {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+ };
+
+ rear-fault {
+ gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ rear-id {
+ gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
+ };
+
+ rear-power {
+ gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
+ };
+
+ power-button {
+ gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ fsi: gpio-fsi {
+ compatible = "fsi-master-gpio", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ iio-hwmon-dps310 {
+ compatible = "iio-hwmon";
+ io-channels = <&dps 0>;
+ };
+
+ iio-hwmon-bmp280 {
+ compatible = "iio-hwmon";
+ io-channels = <&bmp 1>;
+ };
+
+};
+
+&fmc {
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+
+ flash@1 {
+ status = "okay";
+ label = "alt";
+ m25p,fast-read;
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
+ };
+};
+
+&uart1 {
+ /* Rear RS-232 connector */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_nri1_default>;
+};
+
+&uart2 {
+ /* APSS */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&i2c2 {
+ status = "okay";
+
+ /* MUX ->
+ * Samtec 1
+ * Samtec 2
+ */
+};
+
+&i2c3 {
+ status = "okay";
+
+ bmp: bmp280@77 {
+ compatible = "bosch,bmp280";
+ reg = <0x77>;
+ #io-channel-cells = <1>;
+ };
+
+ max31785@52 {
+ compatible = "maxim,max31785a";
+ reg = <0x52>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ dps: dps310@76 {
+ compatible = "infineon,dps310";
+ reg = <0x76>;
+ #io-channel-cells = <0>;
+ };
+
+ pca0: pca9552@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ power-supply@68 {
+ compatible = "ibm,cffps1";
+ reg = <0x68>;
+ };
+
+ power-supply@69 {
+ compatible = "ibm,cffps1";
+ reg = <0x69>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ tmp423a@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+
+ ir35221@70 {
+ compatible = "infineon,ir35221";
+ reg = <0x70>;
+ };
+
+ ir35221@71 {
+ compatible = "infineon,ir35221";
+ reg = <0x71>;
+ };
+};
+
+
+&i2c5 {
+ status = "okay";
+
+ tmp423a@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+
+ ir35221@70 {
+ compatible = "infineon,ir35221";
+ reg = <0x70>;
+ };
+
+ ir35221@71 {
+ compatible = "infineon,ir35221";
+ reg = <0x71>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ tmp275@4a {
+ compatible = "ti,tmp275";
+ reg = <0x4a>;
+ };
+};
+
+&i2c10 {
+ /* MUX
+ * -> PCIe Slot 3
+ * -> PCIe Slot 4
+ */
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+
+ pca9552: pca9552@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+ "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF",
+ "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+ "GPU4_TH_OVERT_N_BUFF", "GPU5_TH_OVERT_N_BUFF",
+ "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+ "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+ "GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
+ "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ ucd90160@64 {
+ compatible = "ti,ucd90160";
+ reg = <0x64>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
--
2.14.1
^ permalink raw reply related
* [PATCH 15/20] ARM: dts: aspeed: Sort ASPEED entries in makefile
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
In preperation for adding more boards.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/Makefile | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9caf21..5d1e9d37bf3a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1101,7 +1101,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt8127-moose.dtb \
mt8135-evbp1.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
-dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \
- aspeed-bmc-opp-romulus.dtb \
- aspeed-ast2500-evb.dtb
+dtb-$(CONFIG_ARCH_ASPEED) += \
+ aspeed-ast2500-evb.dtb \
+ aspeed-bmc-opp-palmetto.dtb \
+ aspeed-bmc-opp-romulus.dtb
endif
--
2.14.1
^ permalink raw reply related
* [PATCH 14/20] ARM: dts: Add OpenBMC flash layout
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
This is a layout used by OpenBMC systems. It describes the fixed flash
layout of a 32MB mtd device.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/openbmc-flash-layout.dtsi | 32 +++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100644 arch/arm/boot/dts/openbmc-flash-layout.dtsi
diff --git a/arch/arm/boot/dts/openbmc-flash-layout.dtsi b/arch/arm/boot/dts/openbmc-flash-layout.dtsi
new file mode 100644
index 000000000000..63ad8db7a431
--- /dev/null
+++ b/arch/arm/boot/dts/openbmc-flash-layout.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u-boot@0 {
+ reg = <0x0 0x60000>;
+ label = "u-boot";
+ };
+
+ u-boot-env@60000 {
+ reg = <0x60000 0x20000>;
+ label = "u-boot-env";
+ };
+
+ kernel@80000 {
+ reg = <0x80000 0x440000>;
+ label = "kernel";
+ };
+
+ rofs@0c0000 {
+ reg = <0x4c0000 0x1740000>;
+ label = "rofs";
+ };
+
+ rwfs@1c00000 {
+ reg = <0x1c00000 0x400000>;
+ label = "rwfs";
+ };
+};
--
2.14.1
^ permalink raw reply related
* [PATCH 13/20] ARM: dts: aspeed: Update license headers
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-aspeed-uLR06cmDAlY/bJ5BZ2RsiQ
In-Reply-To: <20171211050704.20621-1-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
In b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier
to files with no license") these files had the GPL-2.0 licence added
automatically. Update them to be GPL 2.0+ in line with other IBM kernel
contributions.
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
arch/arm/boot/dts/aspeed-ast2500-evb.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 2 +-
arch/arm/boot/dts/aspeed-g4.dtsi | 2 +-
arch/arm/boot/dts/aspeed-g5.dtsi | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 602bc10fdaf4..3e6f38e5d5d0 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
/dts-v1/;
#include "aspeed-g5.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index c786bc2f2919..a8f0c046e83e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
/dts-v1/;
#include "aspeed-g4.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 2d7ac577d6b5..9c175832babc 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
#include <dt-bindings/clock/aspeed-clock.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 030a760696fd..360329eab7c3 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
#include <dt-bindings/clock/aspeed-clock.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH 12/20] ARM: dts: aspeed: Remove skeleton.dtsi
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-aspeed-uLR06cmDAlY/bJ5BZ2RsiQ
In-Reply-To: <20171211050704.20621-1-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
We don't require it for any of the ASPEED systems.
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 1 -
arch/arm/boot/dts/aspeed-g5.dtsi | 1 -
2 files changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b3580f37f507..2d7ac577d6b5 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0
-#include "skeleton.dtsi"
#include <dt-bindings/clock/aspeed-clock.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 50766f0629f8..030a760696fd 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0
-#include "skeleton.dtsi"
#include <dt-bindings/clock/aspeed-clock.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH 11/20] ARM: dts: aspeed: Add LPC Snoop device
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
LPC snoop hardware on the ASPEED BMC, used for monitoring
host I/O port activity.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 7 +++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 6 ++++++
2 files changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index f6fee40c04c0..b3580f37f507 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -236,6 +236,13 @@
status = "disabled";
};
+ lpc_snoop: lpc-snoop@0 {
+ compatible = "aspeed,ast2500-lpc-snoop";
+ reg = <0x0 0x80>;
+ interrupts = <8>;
+ status = "disabled";
+ };
+
lhc: lhc@20 {
compatible = "aspeed,ast2500-lhc";
reg = <0x20 0x24 0x48 0x8>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 96a9d2fe3f0d..50766f0629f8 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -287,6 +287,12 @@
status = "disabled";
};
+ lpc_snoop: lpc-snoop@0 {
+ compatible = "aspeed,ast2500-lpc-snoop";
+ reg = <0x0 0x80>;
+ interrupts = <8>;
+ status = "disabled";
+ };
lhc: lhc@20 {
compatible = "aspeed,ast2500-lhc";
--
2.14.1
^ permalink raw reply related
* [PATCH 10/20] ARM: dts: aspeed: Add PWM and tachometer node
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 9 +++++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 9 +++++++++
2 files changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index fa52a01f50b5..f6fee40c04c0 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -189,6 +189,15 @@
clocks = <&syscon ASPEED_CLK_APB>;
};
+ pwm_tacho: pwm-tacho-controller@1e786000 {
+ compatible = "aspeed,ast2400-pwm-tacho";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1e786000 0x1000>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ status = "disabled";
+ };
+
vuart: serial@1e787000 {
compatible = "aspeed,ast2400-vuart";
reg = <0x1e787000 0x40>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 5e6db2aa5c23..96a9d2fe3f0d 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -239,6 +239,15 @@
status = "disabled";
};
+ pwm_tacho: pwm-tacho-controller@1e786000 {
+ compatible = "aspeed,ast2500-pwm-tacho";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1e786000 0x1000>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ status = "disabled";
+ };
+
vuart: serial@1e787000 {
compatible = "aspeed,ast2500-vuart";
reg = <0x1e787000 0x40>;
--
2.14.1
^ permalink raw reply related
* [PATCH 09/20] ARM: dts: aspeed: Add clock phandle to GPIO
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
This enables a feature where the driver can debounce inputs.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 1 +
arch/arm/boot/dts/aspeed-g5.dtsi | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index afac0ca0cb10..fa52a01f50b5 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -144,6 +144,7 @@
reg = <0x1e780000 0x1000>;
interrupts = <20>;
gpio-ranges = <&pinctrl 0 0 220>;
+ clocks = <&syscon ASPEED_CLK_APB>;
interrupt-controller;
};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index f3689caf6fe2..5e6db2aa5c23 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -187,6 +187,7 @@
reg = <0x1e780000 0x1000>;
interrupts = <20>;
gpio-ranges = <&pinctrl 0 0 220>;
+ clocks = <&syscon ASPEED_CLK_APB>;
interrupt-controller;
};
--
2.14.1
^ permalink raw reply related
* [PATCH 08/20] ARM: dts: aspeed: Add flash controller clocks
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 2 ++
arch/arm/boot/dts/aspeed-g5.dtsi | 3 +++
2 files changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 2e3666d4fbeb..afac0ca0cb10 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -56,6 +56,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2400-fmc";
+ clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
interrupts = <19>;
flash@0 {
@@ -71,6 +72,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2400-spi";
+ clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
flash@0 {
reg = < 0 >;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 24bb2d16b900..f3689caf6fe2 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -56,6 +56,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2500-fmc";
+ clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
interrupts = <19>;
flash@0 {
@@ -81,6 +82,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2500-spi";
+ clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
flash@0 {
reg = < 0 >;
@@ -100,6 +102,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2500-spi";
+ clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
flash@0 {
reg = < 0 >;
--
2.14.1
^ permalink raw reply related
* [PATCH 07/20] ARM: dts: aspeed: Add watchdog clocks
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 2 ++
arch/arm/boot/dts/aspeed-g5.dtsi | 3 +++
2 files changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index cf407b4db630..2e3666d4fbeb 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -177,11 +177,13 @@
wdt1: watchdog@1e785000 {
compatible = "aspeed,ast2400-wdt";
reg = <0x1e785000 0x1c>;
+ clocks = <&syscon ASPEED_CLK_APB>;
};
wdt2: watchdog@1e785020 {
compatible = "aspeed,ast2400-wdt";
reg = <0x1e785020 0x1c>;
+ clocks = <&syscon ASPEED_CLK_APB>;
};
vuart: serial@1e787000 {
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index ab26156d6822..24bb2d16b900 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -219,16 +219,19 @@
wdt1: watchdog@1e785000 {
compatible = "aspeed,ast2500-wdt";
reg = <0x1e785000 0x20>;
+ clocks = <&syscon ASPEED_CLK_APB>;
};
wdt2: watchdog@1e785020 {
compatible = "aspeed,ast2500-wdt";
reg = <0x1e785020 0x20>;
+ clocks = <&syscon ASPEED_CLK_APB>;
};
wdt3: watchdog@1e785040 {
compatible = "aspeed,ast2500-wdt";
reg = <0x1e785040 0x20>;
+ clocks = <&syscon ASPEED_CLK_APB>;
status = "disabled";
};
--
2.14.1
^ permalink raw reply related
* [PATCH 06/20] ARM: dts: aspeed: Add MAC clocks
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-aspeed-uLR06cmDAlY/bJ5BZ2RsiQ
In-Reply-To: <20171211050704.20621-1-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 2 ++
arch/arm/boot/dts/aspeed-g5.dtsi | 2 ++
2 files changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index c87883a7f250..cf407b4db630 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -91,6 +91,7 @@
compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
reg = <0x1e660000 0x180>;
interrupts = <2>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
status = "disabled";
};
@@ -98,6 +99,7 @@
compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
reg = <0x1e680000 0x180>;
interrupts = <3>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 90bc09d93ea6..ab26156d6822 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -125,6 +125,7 @@
compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
reg = <0x1e660000 0x180>;
interrupts = <2>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
status = "disabled";
};
@@ -132,6 +133,7 @@
compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
reg = <0x1e680000 0x180>;
interrupts = <3>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
status = "disabled";
};
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH 05/20] ARM: dts: aspeed: Add proper clock references
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
The existing device trees use fixed-clocks in order to boot without a
clk driver. The newly added clk driver provides proper clock support,
including gating, so we move the device trees over to properly request
clocks.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 100 +++++++++++++++----------------------
arch/arm/boot/dts/aspeed-g5.dtsi | 104 +++++++++++++++------------------------
2 files changed, 81 insertions(+), 123 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b6d01523555a..c87883a7f250 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "skeleton.dtsi"
+#include <dt-bindings/clock/aspeed-clock.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
@@ -107,47 +108,12 @@
ranges;
syscon: syscon@1e6e2000 {
- compatible = "aspeed,g4-scu", "syscon", "simple-mfd";
+ compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1a8>;
#address-cells = <1>;
#size-cells = <0>;
-
- clk_clkin: clk_clkin {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <48000000>;
- };
-
- clk_hpll: clk_hpll@70 {
- #clock-cells = <0>;
- compatible = "aspeed,g4-hpll-clock", "fixed-clock";
- reg = <0x70>;
- clocks = <&clk_clkin>;
- clock-frequency = <384000000>;
- };
-
- clk_ahb: clk_ahb@70 {
- #clock-cells = <0>;
- compatible = "aspeed,g4-ahb-clock", "fixed-clock";
- reg = <0x70>;
- clocks = <&clk_hpll>;
- clock-frequency = <192000000>;
- };
-
- clk_apb: clk_apb@8 {
- #clock-cells = <0>;
- compatible = "aspeed,g4-apb-clock", "fixed-clock";
- reg = <0x08>;
- clocks = <&clk_hpll>;
- clock-frequency = <48000000>;
- };
-
- clk_uart: clk_uart@2c{
- #clock-cells = <0>;
- compatible = "aspeed,g4-uart-clock", "fixed-clock";
- reg = <0x2c>;
- clock-frequency = <24000000>;
- };
+ #clock-cells = <1>;
+ #reset-cells = <1>;
pinctrl: pinctrl {
compatible = "aspeed,g4-pinctrl";
@@ -157,7 +123,7 @@
adc: adc@1e6e9000 {
compatible = "aspeed,ast2400-adc";
reg = <0x1e6e9000 0xb0>;
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
#io-channel-cells = <1>;
status = "disabled";
};
@@ -182,7 +148,7 @@
compatible = "aspeed,ast2400-timer";
reg = <0x1e782000 0x90>;
interrupts = <16 17 18 35 36 37 38 39>;
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
clock-names = "PCLK";
};
@@ -191,7 +157,7 @@
reg = <0x1e783000 0x20>;
reg-shift = <2>;
interrupts = <9>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
no-loopback-test;
status = "disabled";
};
@@ -201,7 +167,7 @@
reg = <0x1e784000 0x20>;
reg-shift = <2>;
interrupts = <10>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
no-loopback-test;
status = "disabled";
};
@@ -221,7 +187,7 @@
reg = <0x1e787000 0x40>;
reg-shift = <2>;
interrupts = <8>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_APB>;
no-loopback-test;
status = "disabled";
};
@@ -266,7 +232,7 @@
reg = <0x1e78d000 0x20>;
reg-shift = <2>;
interrupts = <32>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
no-loopback-test;
status = "disabled";
};
@@ -276,7 +242,7 @@
reg = <0x1e78e000 0x20>;
reg-shift = <2>;
interrupts = <33>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
no-loopback-test;
status = "disabled";
};
@@ -286,7 +252,7 @@
reg = <0x1e78f000 0x20>;
reg-shift = <2>;
interrupts = <34>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
no-loopback-test;
status = "disabled";
};
@@ -317,7 +283,8 @@
reg = <0x40 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <0>;
interrupt-parent = <&i2c_ic>;
@@ -332,7 +299,8 @@
reg = <0x80 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <1>;
interrupt-parent = <&i2c_ic>;
@@ -347,7 +315,8 @@
reg = <0xc0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <2>;
interrupt-parent = <&i2c_ic>;
@@ -363,7 +332,8 @@
reg = <0x100 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <3>;
interrupt-parent = <&i2c_ic>;
@@ -379,7 +349,8 @@
reg = <0x140 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <4>;
interrupt-parent = <&i2c_ic>;
@@ -395,7 +366,8 @@
reg = <0x180 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <5>;
interrupt-parent = <&i2c_ic>;
@@ -411,7 +383,8 @@
reg = <0x1c0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <6>;
interrupt-parent = <&i2c_ic>;
@@ -427,7 +400,8 @@
reg = <0x300 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <7>;
interrupt-parent = <&i2c_ic>;
@@ -443,7 +417,8 @@
reg = <0x340 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <8>;
interrupt-parent = <&i2c_ic>;
@@ -459,7 +434,8 @@
reg = <0x380 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <9>;
interrupt-parent = <&i2c_ic>;
@@ -475,7 +451,8 @@
reg = <0x3c0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <10>;
interrupt-parent = <&i2c_ic>;
@@ -491,7 +468,8 @@
reg = <0x400 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <11>;
interrupt-parent = <&i2c_ic>;
@@ -507,7 +485,8 @@
reg = <0x440 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <12>;
interrupt-parent = <&i2c_ic>;
@@ -523,7 +502,8 @@
reg = <0x480 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <13>;
interrupt-parent = <&i2c_ic>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 7861631940fe..90bc09d93ea6 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "skeleton.dtsi"
+#include <dt-bindings/clock/aspeed-clock.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
@@ -141,55 +142,18 @@
ranges;
syscon: syscon@1e6e2000 {
- compatible = "aspeed,g5-scu", "syscon", "simple-mfd";
+ compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1a8>;
#address-cells = <1>;
#size-cells = <0>;
-
- clk_clkin: clk_clkin@70 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-clkin-clock", "fixed-clock";
- reg = <0x70>;
- clock-frequency = <24000000>;
- };
-
- clk_hpll: clk_hpll@24 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-hpll-clock", "fixed-clock";
- reg = <0x24>;
- clocks = <&clk_clkin>;
- clock-frequency = <792000000>;
- };
-
- clk_ahb: clk_ahb@70 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-ahb-clock", "fixed-clock";
- reg = <0x70>;
- clocks = <&clk_hpll>;
- clock-frequency = <198000000>;
- };
-
- clk_apb: clk_apb@8 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-apb-clock", "fixed-clock";
- reg = <0x08>;
- clocks = <&clk_hpll>;
- clock-frequency = <24750000>;
- };
-
- clk_uart: clk_uart@2c {
- #clock-cells = <0>;
- compatible = "aspeed,uart-clock", "fixed-clock";
- reg = <0x2c>;
- clock-frequency = <24000000>;
- };
+ #clock-cells = <1>;
+ #reset-cells = <1>;
pinctrl: pinctrl {
compatible = "aspeed,g5-pinctrl";
aspeed,external-nodes = <&gfx &lhc>;
};
-
};
gfx: display@1e6e6000 {
@@ -201,7 +165,7 @@
adc: adc@1e6e9000 {
compatible = "aspeed,ast2500-adc";
reg = <0x1e6e9000 0xb0>;
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
#io-channel-cells = <1>;
status = "disabled";
};
@@ -226,7 +190,7 @@
compatible = "aspeed,ast2400-timer";
reg = <0x1e782000 0x90>;
interrupts = <16 17 18 35 36 37 38 39>;
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
clock-names = "PCLK";
};
@@ -235,7 +199,7 @@
reg = <0x1e783000 0x20>;
reg-shift = <2>;
interrupts = <9>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
no-loopback-test;
status = "disabled";
};
@@ -245,7 +209,7 @@
reg = <0x1e784000 0x20>;
reg-shift = <2>;
interrupts = <10>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
no-loopback-test;
status = "disabled";
};
@@ -270,8 +234,8 @@
compatible = "aspeed,ast2500-vuart";
reg = <0x1e787000 0x40>;
reg-shift = <2>;
- interrupts = <10>;
- clocks = <&clk_uart>;
+ interrupts = <8>;
+ clocks = <&syscon ASPEED_CLK_APB>;
no-loopback-test;
status = "disabled";
};
@@ -318,7 +282,7 @@
reg = <0x1e78d000 0x20>;
reg-shift = <2>;
interrupts = <32>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
no-loopback-test;
status = "disabled";
};
@@ -328,7 +292,7 @@
reg = <0x1e78e000 0x20>;
reg-shift = <2>;
interrupts = <33>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
no-loopback-test;
status = "disabled";
};
@@ -338,7 +302,7 @@
reg = <0x1e78f000 0x20>;
reg-shift = <2>;
interrupts = <34>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
no-loopback-test;
status = "disabled";
};
@@ -369,7 +333,8 @@
reg = <0x40 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <0>;
interrupt-parent = <&i2c_ic>;
@@ -384,7 +349,8 @@
reg = <0x80 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <1>;
interrupt-parent = <&i2c_ic>;
@@ -399,7 +365,8 @@
reg = <0xc0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <2>;
interrupt-parent = <&i2c_ic>;
@@ -415,7 +382,8 @@
reg = <0x100 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <3>;
interrupt-parent = <&i2c_ic>;
@@ -431,7 +399,8 @@
reg = <0x140 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <4>;
interrupt-parent = <&i2c_ic>;
@@ -447,7 +416,8 @@
reg = <0x180 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <5>;
interrupt-parent = <&i2c_ic>;
@@ -463,7 +433,8 @@
reg = <0x1c0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <6>;
interrupt-parent = <&i2c_ic>;
@@ -479,7 +450,8 @@
reg = <0x300 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <7>;
interrupt-parent = <&i2c_ic>;
@@ -495,7 +467,8 @@
reg = <0x340 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <8>;
interrupt-parent = <&i2c_ic>;
@@ -511,7 +484,8 @@
reg = <0x380 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <9>;
interrupt-parent = <&i2c_ic>;
@@ -527,7 +501,8 @@
reg = <0x3c0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <10>;
interrupt-parent = <&i2c_ic>;
@@ -543,7 +518,8 @@
reg = <0x400 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <11>;
interrupt-parent = <&i2c_ic>;
@@ -559,7 +535,8 @@
reg = <0x440 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <12>;
interrupt-parent = <&i2c_ic>;
@@ -575,7 +552,8 @@
reg = <0x480 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <13>;
interrupt-parent = <&i2c_ic>;
--
2.14.1
^ permalink raw reply related
* [PATCH 04/20] ARM: dts: aspeed: Add LPC and child devices
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
From: Andrew Jeffery <andrew@aj.id.au>
Ensure the ordering is correct and add all of the children in the SoC
device trees for the ast2400 and ast2500.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 35 +++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 27 +++++++++++++++++----------
2 files changed, 52 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 9ebf90f34709..b6d01523555a 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -226,6 +226,41 @@
status = "disabled";
};
+ lpc: lpc@1e789000 {
+ compatible = "aspeed,ast2400-lpc", "simple-mfd";
+ reg = <0x1e789000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e789000 0x1000>;
+
+ lpc_bmc: lpc-bmc@0 {
+ compatible = "aspeed,ast2400-lpc-bmc";
+ reg = <0x0 0x80>;
+ };
+
+ lpc_host: lpc-host@80 {
+ compatible = "aspeed,ast2400-lpc-host", "simple-mfd", "syscon";
+ reg = <0x80 0x1e0>;
+ reg-io-width = <4>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80 0x1e0>;
+
+ lpc_ctrl: lpc-ctrl@0 {
+ compatible = "aspeed,ast2400-lpc-ctrl";
+ reg = <0x0 0x80>;
+ status = "disabled";
+ };
+
+ lhc: lhc@20 {
+ compatible = "aspeed,ast2500-lhc";
+ reg = <0x20 0x24 0x48 0x8>;
+ };
+ };
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 1f9d28313f82..7861631940fe 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -266,6 +266,16 @@
status = "disabled";
};
+ vuart: serial@1e787000 {
+ compatible = "aspeed,ast2500-vuart";
+ reg = <0x1e787000 0x40>;
+ reg-shift = <2>;
+ interrupts = <10>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
lpc: lpc@1e789000 {
compatible = "aspeed,ast2500-lpc", "simple-mfd";
reg = <0x1e789000 0x1000>;
@@ -289,6 +299,13 @@
reg-io-width = <4>;
+ lpc_ctrl: lpc-ctrl@0 {
+ compatible = "aspeed,ast2500-lpc-ctrl";
+ reg = <0x0 0x80>;
+ status = "disabled";
+ };
+
+
lhc: lhc@20 {
compatible = "aspeed,ast2500-lhc";
reg = <0x20 0x24 0x48 0x8>;
@@ -296,16 +313,6 @@
};
};
- vuart: serial@1e787000 {
- compatible = "aspeed,ast2500-vuart";
- reg = <0x1e787000 0x40>;
- reg-shift = <2>;
- interrupts = <10>;
- clocks = <&clk_uart>;
- no-loopback-test;
- status = "disabled";
- };
-
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
--
2.14.1
^ permalink raw reply related
* [PATCH 03/20] ARM: dts: aspeed-g4: Correct VUART IRQ number
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
This should have always been 8.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 100d092e6c07..9ebf90f34709 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -220,7 +220,7 @@
compatible = "aspeed,ast2400-vuart";
reg = <0x1e787000 0x40>;
reg-shift = <2>;
- interrupts = <10>;
+ interrupts = <8>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
--
2.14.1
^ permalink raw reply related
* [PATCH 02/20] dt-bindings: gpio: Add ASPEED constants
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
These are used to by the device tree to map pin numbers to constants
required by the GPIO bindings.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 1 +
arch/arm/boot/dts/aspeed-g5.dtsi | 1 +
include/dt-bindings/gpio/aspeed-gpio.h | 49 ++++++++++++++++++++++++++++++++++
3 files changed, 51 insertions(+)
create mode 100644 include/dt-bindings/gpio/aspeed-gpio.h
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 45d815a86d42..100d092e6c07 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "skeleton.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
model = "Aspeed BMC";
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 5c4ecdba3a6b..1f9d28313f82 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "skeleton.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
model = "Aspeed BMC";
diff --git a/include/dt-bindings/gpio/aspeed-gpio.h b/include/dt-bindings/gpio/aspeed-gpio.h
new file mode 100644
index 000000000000..56fc4889b2c4
--- /dev/null
+++ b/include/dt-bindings/gpio/aspeed-gpio.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * This header provides constants for binding aspeed,*-gpio.
+ *
+ * The first cell in Aspeed's GPIO specifier is the GPIO ID. The macros below
+ * provide names for this.
+ *
+ * The second cell contains standard flag values specified in gpio.h.
+ */
+
+#ifndef _DT_BINDINGS_GPIO_ASPEED_GPIO_H
+#define _DT_BINDINGS_GPIO_ASPEED_GPIO_H
+
+#include <dt-bindings/gpio/gpio.h>
+
+#define ASPEED_GPIO_PORT_A 0
+#define ASPEED_GPIO_PORT_B 1
+#define ASPEED_GPIO_PORT_C 2
+#define ASPEED_GPIO_PORT_D 3
+#define ASPEED_GPIO_PORT_E 4
+#define ASPEED_GPIO_PORT_F 5
+#define ASPEED_GPIO_PORT_G 6
+#define ASPEED_GPIO_PORT_H 7
+#define ASPEED_GPIO_PORT_I 8
+#define ASPEED_GPIO_PORT_J 9
+#define ASPEED_GPIO_PORT_K 10
+#define ASPEED_GPIO_PORT_L 11
+#define ASPEED_GPIO_PORT_M 12
+#define ASPEED_GPIO_PORT_N 13
+#define ASPEED_GPIO_PORT_O 14
+#define ASPEED_GPIO_PORT_P 15
+#define ASPEED_GPIO_PORT_Q 16
+#define ASPEED_GPIO_PORT_R 17
+#define ASPEED_GPIO_PORT_S 18
+#define ASPEED_GPIO_PORT_T 19
+#define ASPEED_GPIO_PORT_U 20
+#define ASPEED_GPIO_PORT_V 21
+#define ASPEED_GPIO_PORT_W 22
+#define ASPEED_GPIO_PORT_X 23
+#define ASPEED_GPIO_PORT_Y 24
+#define ASPEED_GPIO_PORT_Z 25
+#define ASPEED_GPIO_PORT_AA 26
+#define ASPEED_GPIO_PORT_AB 27
+#define ASPEED_GPIO_PORT_AC 28
+
+#define ASPEED_GPIO(port, offset) \
+ ((ASPEED_GPIO_PORT_##port * 8) + offset)
+
+#endif
--
2.14.1
^ permalink raw reply related
* [PATCH 01/20] dt-bindings: clock: Add ASPEED constants
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-aspeed-uLR06cmDAlY/bJ5BZ2RsiQ
In-Reply-To: <20171211050704.20621-1-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
These will be merged as part of the clock driver. This commit is
included so the tree will build without the clock series being applied.
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
include/dt-bindings/clock/aspeed-clock.h | 54 ++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644 include/dt-bindings/clock/aspeed-clock.h
diff --git a/include/dt-bindings/clock/aspeed-clock.h b/include/dt-bindings/clock/aspeed-clock.h
new file mode 100644
index 000000000000..fe46ab69da5c
--- /dev/null
+++ b/include/dt-bindings/clock/aspeed-clock.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+#ifndef DT_BINDINGS_ASPEED_CLOCK_H
+#define DT_BINDINGS_ASPEED_CLOCK_H
+
+#define ASPEED_CLK_GATE_ECLK 0
+#define ASPEED_CLK_GATE_GCLK 1
+#define ASPEED_CLK_GATE_MCLK 2
+#define ASPEED_CLK_GATE_VCLK 3
+#define ASPEED_CLK_GATE_BCLK 4
+#define ASPEED_CLK_GATE_DCLK 5
+#define ASPEED_CLK_GATE_REFCLK 6
+#define ASPEED_CLK_GATE_USBPORT2CLK 7
+#define ASPEED_CLK_GATE_LCLK 8
+#define ASPEED_CLK_GATE_USBUHCICLK 9
+#define ASPEED_CLK_GATE_D1CLK 10
+#define ASPEED_CLK_GATE_YCLK 11
+#define ASPEED_CLK_GATE_USBPORT1CLK 12
+#define ASPEED_CLK_GATE_UART1CLK 13
+#define ASPEED_CLK_GATE_UART2CLK 14
+#define ASPEED_CLK_GATE_UART5CLK 15
+#define ASPEED_CLK_GATE_ESPICLK 16
+#define ASPEED_CLK_GATE_MAC1CLK 17
+#define ASPEED_CLK_GATE_MAC2CLK 18
+#define ASPEED_CLK_GATE_RSACLK 19
+#define ASPEED_CLK_GATE_UART3CLK 20
+#define ASPEED_CLK_GATE_UART4CLK 21
+#define ASPEED_CLK_GATE_SDCLKCLK 22
+#define ASPEED_CLK_GATE_LHCCLK 23
+#define ASPEED_CLK_HPLL 24
+#define ASPEED_CLK_AHB 25
+#define ASPEED_CLK_APB 26
+#define ASPEED_CLK_UART 27
+#define ASPEED_CLK_SDIO 28
+#define ASPEED_CLK_ECLK 29
+#define ASPEED_CLK_ECLK_MUX 30
+#define ASPEED_CLK_LHCLK 31
+#define ASPEED_CLK_MAC 32
+#define ASPEED_CLK_BCLK 33
+#define ASPEED_CLK_MPLL 34
+
+#define ASPEED_NUM_CLKS 35
+
+#define ASPEED_RESET_XDMA 0
+#define ASPEED_RESET_MCTP 1
+#define ASPEED_RESET_ADC 2
+#define ASPEED_RESET_JTAG_MASTER 3
+#define ASPEED_RESET_MIC 4
+#define ASPEED_RESET_PWM 5
+#define ASPEED_RESET_PCIVGA 6
+#define ASPEED_RESET_I2C 7
+#define ASPEED_RESET_AHB 8
+
+#endif
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox