* Re: [PATCH 10/25] arm: orion5x: dts: Remove leading 0x and 0s from bindings notation
From: Andrew Lunn @ 2017-12-15 13:01 UTC (permalink / raw)
To: Mathieu Malaterre
Cc: Rob Herring, Jason Cooper, Sebastian Hesselbarth, Gregory Clement,
Mark Rutland, Russell King, linux-arm-kernel, devicetree,
linux-kernel
In-Reply-To: <20171215124642.30384-1-malat@debian.org>
On Fri, Dec 15, 2017 at 01:46:42PM +0100, Mathieu Malaterre wrote:
> Improve the DTS files by removing all the leading "0x" and zeros to fix the
...
> };
>
> - uboot_env@3F000 {
> + uboot_env@3f000 {
> reg = <0x3F000 0x1000>;
Hi Mathieu
Thanks for looking at this. But the commit message does not fit the
actual change.
Andrew
^ permalink raw reply
* Re: [PATCH 01/25] arm: artpec: dts: Remove leading 0x and 0s from bindings notation
From: Jesper Nilsson @ 2017-12-15 12:57 UTC (permalink / raw)
To: Mathieu Malaterre
Cc: Rob Herring, Jesper Nilsson, Lars Persson, Niklas Cassel,
Mark Rutland, Russell King, linux-arm-kernel-VrBV9hrLPhE,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <20171215124621.29928-1-malat-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
On Fri, Dec 15, 2017 at 01:46:21PM +0100, Mathieu Malaterre wrote:
> Improve the DTS files by removing all the leading "0x" and zeros to fix the
> following dtc warnings:
>
> Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
>
> and
>
> Warning (unit_address_format): Node /XXX unit name should not have leading 0s
>
> Converted using the following command:
>
> find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
>
> For simplicity, two sed expressions were used to solve each warnings separately.
>
> To make the regex expression more robust a few other issues were resolved,
> namely setting unit-address to lower case, and adding a whitespace before the
> the opening curly brace:
>
> https://elinux.org/Device_Tree_Linux#Linux_conventions
>
> This will solve as a side effect warning:
>
> Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
>
> This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
>
> Reported-by: David Daney <ddaney-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
> Suggested-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Signed-off-by: Mathieu Malaterre <malat-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
Acked-by: Jesper Nilsson <jesper.nilsson-VrBV9hrLPhE@public.gmane.org>
> ---
> arch/arm/boot/dts/artpec6.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
> index 2ed11773048d..71e0e75e986b 100644
> --- a/arch/arm/boot/dts/artpec6.dtsi
> +++ b/arch/arm/boot/dts/artpec6.dtsi
> @@ -98,7 +98,7 @@
> clock-frequency = <125000000>;
> };
>
> - clkctrl: clkctrl@0xf8000000 {
> + clkctrl: clkctrl@f8000000 {
> #clock-cells = <1>;
> compatible = "axis,artpec6-clkctrl";
> reg = <0xf8000000 0x48>;
> --
> 2.11.0
/^JN - Jesper Nilsson
--
Jesper Nilsson -- jesper.nilsson-VrBV9hrLPhE@public.gmane.org
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH 05/25] arm: imx: dts: Remove leading 0x and 0s from bindings notation
From: Fabio Estevam @ 2017-12-15 12:51 UTC (permalink / raw)
To: Mathieu Malaterre
Cc: Rob Herring, Mark Rutland, devicetree-u79uwXL29TY76Z2rM5mHXA,
Russell King, linux-kernel, Sascha Hauer, Fabio Estevam,
Shawn Guo, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
In-Reply-To: <20171215124631.30132-1-malat-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
Hi Mathieu,
On Fri, Dec 15, 2017 at 10:46 AM, Mathieu Malaterre <malat-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org> wrote:
reg = <0x6C>;
> diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
> index 4d308d17f040..369d5a166b3e 100644
> --- a/arch/arm/boot/dts/imx7d.dtsi
> +++ b/arch/arm/boot/dts/imx7d.dtsi
> @@ -129,7 +129,7 @@
> status = "disabled";
> };
>
> - pcie: pcie@0x33800000 {
> + pcie: pcie@33800000 {
I have already sent a fix for this one.
> compatible = "fsl,imx7d-pcie", "snps,dw-pcie";
> reg = <0x33800000 0x4000>,
> <0x4ff00000 0x80000>;
> diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
> index 82ad26e766eb..a00ba897e58d 100644
> --- a/arch/arm/boot/dts/imx7s.dtsi
> +++ b/arch/arm/boot/dts/imx7s.dtsi
> @@ -583,7 +583,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
>
> - pgc_pcie_phy: pgc-power-domain@IMX7_POWER_DOMAIN_PCIE_PHY {
> + pgc_pcie_phy: pgc-power-domain@imx7_power_domain_pcie_phy {
Original code was correct.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH 25/25] arm: ste: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mathieu Malaterre, Mark Rutland, Russell King,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
Suggested-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Mathieu Malaterre <malat-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
---
arch/arm/boot/dts/ste-dbx5x0.dtsi | 2 +-
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 130 ++++++++++++++---------------
arch/arm/boot/dts/ste-u300.dts | 50 +++++------
3 files changed, 91 insertions(+), 91 deletions(-)
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 2310a4e97768..cff985f9fb77 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -474,7 +474,7 @@
clocks = <&prcc_pclk 5 0>;
};
- dma: dma-controller@801C0000 {
+ dma: dma-controller@801c0000 {
compatible = "stericsson,db8500-dma40", "stericsson,dma40";
reg = <0x801C0000 0x1000 0x40010000 0x800>;
reg-names = "base", "lcpa";
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 68aab50a73ab..2970719ed22c 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -195,7 +195,7 @@
* MXTAL "Main Chrystal" is a chrystal oscillator @19.2 MHz
* that is parent of TIMCLK, PLL1 and PLL2
*/
- mxtal: mxtal-QvK0ZaTcdGg@public.gmane.org {
+ mxtal: mxtal-JMGrCxkcPhs@public.gmane.org {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <19200000>;
@@ -207,7 +207,7 @@
* divided by 8. This clock is used by the timers and
* watchdog. See page 105 ff.
*/
- timclk: timclk@2.4M {
+ timclk: timclk@2.4m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <8>;
@@ -245,21 +245,21 @@
pll-id = <2>;
clocks = <&mxtal>;
};
- clk216: clk216@216M {
+ clk216: clk216@216m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <4>;
clock-mult = <1>;
clocks = <&pll2>;
};
- clk108: clk108@108M {
+ clk108: clk108@108m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <2>;
clock-mult = <1>;
clocks = <&clk216>;
};
- clk72: clk72@72M {
+ clk72: clk72@72m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
/* The data sheet does not say how this is derived */
@@ -267,7 +267,7 @@
clock-mult = <1>;
clocks = <&pll2>;
};
- clk48: clk48@48M {
+ clk48: clk48@48m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
/* The data sheet does not say how this is derived */
@@ -275,7 +275,7 @@
clock-mult = <1>;
clocks = <&pll2>;
};
- clk27: clk27@27M {
+ clk27: clk27@27m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <4>;
@@ -284,7 +284,7 @@
};
/* This apparently exists as well */
- ulpiclk: ulpiclk@60M {
+ ulpiclk: ulpiclk@60m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <60000000>;
@@ -295,193 +295,193 @@
* peripheral clocking, clock gates.
*/
- hclkdma0: hclkdma0@48M {
+ hclkdma0: hclkdma0@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <0>;
clocks = <&hclk>;
};
- hclksmc: hclksmc@48M {
+ hclksmc: hclksmc@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <1>;
clocks = <&hclk>;
};
- hclksdram: hclksdram@48M {
+ hclksdram: hclksdram@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <2>;
clocks = <&hclk>;
};
- hclkdma1: hclkdma1@48M {
+ hclkdma1: hclkdma1@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <3>;
clocks = <&hclk>;
};
- hclkclcd: hclkclcd@48M {
+ hclkclcd: hclkclcd@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <4>;
clocks = <&hclk>;
};
- pclkirda: pclkirda@48M {
+ pclkirda: pclkirda@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <5>;
clocks = <&pclk>;
};
- pclkssp: pclkssp@48M {
+ pclkssp: pclkssp@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <6>;
clocks = <&pclk>;
};
- pclkuart0: pclkuart0@48M {
+ pclkuart0: pclkuart0@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <7>;
clocks = <&pclk>;
};
- pclksdi: pclksdi@48M {
+ pclksdi: pclksdi@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <8>;
clocks = <&pclk>;
};
- pclki2c0: pclki2c0@48M {
+ pclki2c0: pclki2c0@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <9>;
clocks = <&pclk>;
};
- pclki2c1: pclki2c1@48M {
+ pclki2c1: pclki2c1@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <10>;
clocks = <&pclk>;
};
- pclkuart1: pclkuart1@48M {
+ pclkuart1: pclkuart1@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <11>;
clocks = <&pclk>;
};
- pclkmsp0: pclkmsp0@48M {
+ pclkmsp0: pclkmsp0@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <12>;
clocks = <&pclk>;
};
- hclkusb: hclkusb@48M {
+ hclkusb: hclkusb@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <13>;
clocks = <&hclk>;
};
- hclkdif: hclkdif@48M {
+ hclkdif: hclkdif@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <14>;
clocks = <&hclk>;
};
- hclksaa: hclksaa@48M {
+ hclksaa: hclksaa@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <15>;
clocks = <&hclk>;
};
- hclksva: hclksva@48M {
+ hclksva: hclksva@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <16>;
clocks = <&hclk>;
};
- pclkhsi: pclkhsi@48M {
+ pclkhsi: pclkhsi@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <17>;
clocks = <&pclk>;
};
- pclkxti: pclkxti@48M {
+ pclkxti: pclkxti@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <18>;
clocks = <&pclk>;
};
- pclkuart2: pclkuart2@48M {
+ pclkuart2: pclkuart2@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <19>;
clocks = <&pclk>;
};
- pclkmsp1: pclkmsp1@48M {
+ pclkmsp1: pclkmsp1@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <20>;
clocks = <&pclk>;
};
- pclkmsp2: pclkmsp2@48M {
+ pclkmsp2: pclkmsp2@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <21>;
clocks = <&pclk>;
};
- pclkowm: pclkowm@48M {
+ pclkowm: pclkowm@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <22>;
clocks = <&pclk>;
};
- hclkhpi: hclkhpi@48M {
+ hclkhpi: hclkhpi@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <23>;
clocks = <&hclk>;
};
- pclkske: pclkske@48M {
+ pclkske: pclkske@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <24>;
clocks = <&pclk>;
};
- pclkhsem: pclkhsem@48M {
+ pclkhsem: pclkhsem@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <25>;
clocks = <&pclk>;
};
- hclk3d: hclk3d@48M {
+ hclk3d: hclk3d@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <26>;
clocks = <&hclk>;
};
- hclkhash: hclkhash@48M {
+ hclkhash: hclkhash@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <27>;
clocks = <&hclk>;
};
- hclkcryp: hclkcryp@48M {
+ hclkcryp: hclkcryp@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <28>;
clocks = <&hclk>;
};
- pclkmshc: pclkmshc@48M {
+ pclkmshc: pclkmshc@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <29>;
clocks = <&pclk>;
};
- hclkusbm: hclkusbm@48M {
+ hclkusbm: hclkusbm@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <30>;
clocks = <&hclk>;
};
- hclkrng: hclkrng@48M {
+ hclkrng: hclkrng@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <31>;
@@ -495,153 +495,153 @@
clock-id = <36>;
clocks = <&clk72 &clk48>;
};
- irdaclk: irdaclk@48M {
+ irdaclk: irdaclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <37>;
clocks = <&clk48>;
};
- sspiclk: sspiclk@48M {
+ sspiclk: sspiclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <38>;
clocks = <&clk48>;
};
- uart0clk: uart0clk@48M {
+ uart0clk: uart0clk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <39>;
clocks = <&clk48>;
};
- sdiclk: sdiclk@48M {
+ sdiclk: sdiclk@48m {
/* Also called MCCLK in some documents */
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <40>;
clocks = <&clk48>;
};
- i2c0clk: i2c0clk@48M {
+ i2c0clk: i2c0clk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <41>;
clocks = <&clk48>;
};
- i2c1clk: i2c1clk@48M {
+ i2c1clk: i2c1clk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <42>;
clocks = <&clk48>;
};
- uart1clk: uart1clk@48M {
+ uart1clk: uart1clk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <43>;
clocks = <&clk48>;
};
- mspclk0: mspclk0@48M {
+ mspclk0: mspclk0@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <44>;
clocks = <&clk48>;
};
- usbclk: usbclk@48M {
+ usbclk: usbclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <45>;
clocks = <&clk48>; /* 48 MHz not ULPI */
};
- difclk: difclk@72M {
+ difclk: difclk@72m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <46>;
clocks = <&clk72>;
};
- ipi2cclk: ipi2cclk@48M {
+ ipi2cclk: ipi2cclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <47>;
clocks = <&clk48>; /* Guess */
};
- ipbmcclk: ipbmcclk@48M {
+ ipbmcclk: ipbmcclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <48>;
clocks = <&clk48>; /* Guess */
};
- hsiclkrx: hsiclkrx@216M {
+ hsiclkrx: hsiclkrx@216m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <49>;
clocks = <&clk216>;
};
- hsiclktx: hsiclktx@108M {
+ hsiclktx: hsiclktx@108m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <50>;
clocks = <&clk108>;
};
- uart2clk: uart2clk@48M {
+ uart2clk: uart2clk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <51>;
clocks = <&clk48>;
};
- mspclk1: mspclk1@48M {
+ mspclk1: mspclk1@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <52>;
clocks = <&clk48>;
};
- mspclk2: mspclk2@48M {
+ mspclk2: mspclk2@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <53>;
clocks = <&clk48>;
};
- owmclk: owmclk@48M {
+ owmclk: owmclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <54>;
clocks = <&clk48>; /* Guess */
};
- skeclk: skeclk@48M {
+ skeclk: skeclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <56>;
clocks = <&clk48>; /* Guess */
};
- x3dclk: x3dclk@48M {
+ x3dclk: x3dclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <58>;
clocks = <&clk48>; /* Guess */
};
- pclkmsp3: pclkmsp3@48M {
+ pclkmsp3: pclkmsp3@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <59>;
clocks = <&pclk>;
};
- mspclk3: mspclk3@48M {
+ mspclk3: mspclk3@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <60>;
clocks = <&clk48>;
};
- mshcclk: mshcclk@48M {
+ mshcclk: mshcclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <61>;
clocks = <&clk48>; /* Guess */
};
- usbmclk: usbmclk@48M {
+ usbmclk: usbmclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <62>;
/* Stated as "48 MHz not ULPI clock" */
clocks = <&clk48>;
};
- rngcclk: rngcclk@48M {
+ rngcclk: rngcclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <63>;
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 62ecb6a2fa39..08edee80f022 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -39,88 +39,88 @@
compatible = "fixed-clock";
clock-frequency = <32768>;
};
- pll13: pll13@13M {
+ pll13: pll13@13m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <13000000>;
};
/* Slow bridge clocks under PLL13 */
- slow_clk: slow_clk@13M {
+ slow_clk: slow_clk@13m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <0>; /* Slow */
clock-id = <0>;
clocks = <&pll13>;
};
- uart0_clk: uart0_clk@13M {
+ uart0_clk: uart0_clk@13m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <0>; /* Slow */
clock-id = <1>;
clocks = <&slow_clk>;
};
- gpio_clk: gpio_clk@13M {
+ gpio_clk: gpio_clk@13m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <0>; /* Slow */
clock-id = <4>;
clocks = <&slow_clk>;
};
- rtc_clk: rtc_clk@13M {
+ rtc_clk: rtc_clk@13m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <0>; /* Slow */
clock-id = <6>;
clocks = <&slow_clk>;
};
- apptimer_clk: app_tmr_clk@13M {
+ apptimer_clk: app_tmr_clk@13m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <0>; /* Slow */
clock-id = <7>;
clocks = <&slow_clk>;
};
- acc_tmr_clk@13M {
+ acc_tmr_clk@13m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <0>; /* Slow */
clock-id = <8>;
clocks = <&slow_clk>;
};
- pll208: pll208@208M {
+ pll208: pll208@208m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <208000000>;
};
- app208: app_208_clk@208M {
+ app208: app_208_clk@208m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
clock-mult = <1>;
clocks = <&pll208>;
};
- cpu_clk@208M {
+ cpu_clk@208m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <3>;
clocks = <&app208>;
};
- app104: app_104_clk@104M {
+ app104: app_104_clk@104m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <2>;
clock-mult = <1>;
clocks = <&pll208>;
};
- semi_clk@104M {
+ semi_clk@104m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <9>;
clocks = <&app104>;
};
- app52: app_52_clk@52M {
+ app52: app_52_clk@52m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <4>;
@@ -128,49 +128,49 @@
clocks = <&pll208>;
};
/* AHB subsystem clocks */
- ahb_clk: ahb_subsys_clk@52M {
+ ahb_clk: ahb_subsys_clk@52m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <10>;
clocks = <&app52>;
};
- intcon_clk@52M {
+ intcon_clk@52m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <12>;
clocks = <&ahb_clk>;
};
- emif_clk@52M {
+ emif_clk@52m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <5>;
clocks = <&ahb_clk>;
};
- dmac_clk: dmac_clk@52M {
+ dmac_clk: dmac_clk@52m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <4>;
clocks = <&app52>;
};
- fsmc_clk: fsmc_clk@52M {
+ fsmc_clk: fsmc_clk@52m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <6>;
clocks = <&app52>;
};
- xgam_clk: xgam_clk@52M {
+ xgam_clk: xgam_clk@52m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <8>;
clocks = <&app52>;
};
- app26: app_26_clk@26M {
+ app26: app_26_clk@26m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <2>;
@@ -178,28 +178,28 @@
clocks = <&app52>;
};
/* Fast bridge clocks */
- fast_clk: fast_clk@26M {
+ fast_clk: fast_clk@26m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <1>; /* Fast */
clock-id = <0>;
clocks = <&app26>;
};
- i2c0_clk: i2c0_clk@26M {
+ i2c0_clk: i2c0_clk@26m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <1>; /* Fast */
clock-id = <1>;
clocks = <&fast_clk>;
};
- i2c1_clk: i2c1_clk@26M {
+ i2c1_clk: i2c1_clk@26m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <1>; /* Fast */
clock-id = <2>;
clocks = <&fast_clk>;
};
- mmc_pclk: mmc_p_clk@26M {
+ mmc_pclk: mmc_p_clk@26m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <1>; /* Fast */
@@ -211,7 +211,7 @@
compatible = "stericsson,u300-syscon-mclk";
clocks = <&mmc_pclk>;
};
- spi_clk: spi_p_clk@26M {
+ spi_clk: spi_p_clk@26m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <1>; /* Fast */
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH 24/25] arm: dm8: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mathieu Malaterre, Mark Rutland, Russell King, devicetree,
linux-arm-kernel, linux-kernel
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
arch/arm/boot/dts/dm8148-evm.dts | 8 ++++----
arch/arm/boot/dts/dm8168-evm.dts | 8 ++++----
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
index d6657b3bae84..7747a5b9657f 100644
--- a/arch/arm/boot/dts/dm8148-evm.dts
+++ b/arch/arm/boot/dts/dm8148-evm.dts
@@ -74,19 +74,19 @@
label = "X-Loader";
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
- partition@0x1c0000 {
+ partition@1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
- partition@0x280000 {
+ partition@280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
- partition@0x780000 {
+ partition@780000 {
label = "Filesystem";
reg = <0x780000 0xf880000>;
};
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
index c72a2132aa82..85dd3c703dff 100644
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ b/arch/arm/boot/dts/dm8168-evm.dts
@@ -158,19 +158,19 @@
label = "X-Loader";
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
- partition@0x1c0000 {
+ partition@1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
- partition@0x280000 {
+ partition@280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
- partition@0x780000 {
+ partition@780000 {
label = "Filesystem";
reg = <0x780000 0xf880000>;
};
--
2.11.0
^ permalink raw reply related
* [PATCH 23/25] arm: da8: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mathieu Malaterre, Sekhar Nori, Kevin Hilman, Mark Rutland,
Russell King, linux-arm-kernel, devicetree, linux-kernel
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
arch/arm/boot/dts/da850-lcdk.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index eed89e659143..a1f4d6d5a569 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -293,12 +293,12 @@
label = "u-boot env";
reg = <0 0x020000>;
};
- partition@0x020000 {
+ partition@20000 {
/* The LCDK defaults to booting from this partition */
label = "u-boot";
reg = <0x020000 0x080000>;
};
- partition@0x0a0000 {
+ partition@a0000 {
label = "free space";
reg = <0x0a0000 0>;
};
--
2.11.0
^ permalink raw reply related
* [PATCH 22/25] arm: atlas: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mathieu Malaterre, Mark Rutland, Russell King, devicetree,
linux-arm-kernel, linux-kernel
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
arch/arm/boot/dts/atlas6.dtsi | 2 +-
arch/arm/boot/dts/atlas7.dtsi | 24 ++++++++++++------------
2 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
index 29598667420b..b19d5a6368c9 100644
--- a/arch/arm/boot/dts/atlas6.dtsi
+++ b/arch/arm/boot/dts/atlas6.dtsi
@@ -293,7 +293,7 @@
#dma-cells = <1>;
};
- vip@b00C0000 {
+ vip@b00c0000 {
compatible = "sirf,prima2-vip";
reg = <0xb00C0000 0x10000>;
clocks = <&clks 31>;
diff --git a/arch/arm/boot/dts/atlas7.dtsi b/arch/arm/boot/dts/atlas7.dtsi
index 83449b33de6b..97a24248c988 100644
--- a/arch/arm/boot/dts/atlas7.dtsi
+++ b/arch/arm/boot/dts/atlas7.dtsi
@@ -76,7 +76,7 @@
<0x10302000 0x0100>;
};
- pmu_regulator: pmu_regulator@10E30020 {
+ pmu_regulator: pmu_regulator@10e30020 {
compatible = "sirf,atlas7-pmu-ldo";
reg = <0x10E30020 0x4>;
ldo: ldo {
@@ -84,7 +84,7 @@
};
};
- atlas7_codec: atlas7_codec@10E30000 {
+ atlas7_codec: atlas7_codec@10e30000 {
#sound-dai-cells = <0>;
compatible = "sirf,atlas7-codec";
reg = <0x10E30000 0x400>;
@@ -92,7 +92,7 @@
ldo-supply = <&ldo>;
};
- atlas7_iacc: atlas7_iacc@10D01000 {
+ atlas7_iacc: atlas7_iacc@10d01000 {
#sound-dai-cells = <0>;
compatible = "sirf,atlas7-iacc";
reg = <0x10D01000 0x100>;
@@ -1170,7 +1170,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x13240000 0x13240000 0x00010000>;
- pmipc@0x13240000 {
+ pmipc@13240000 {
compatible = "sirf,atlas7-pmipc";
reg = <0x13240000 0x00010000>;
};
@@ -1265,7 +1265,7 @@
#dma-cells = <1>;
};
- gnssmfw@0x18100000 {
+ gnssmfw@18100000 {
compatible = "sirf,nocfw-gnssm";
reg = <0x18100000 0x3000>;
};
@@ -1374,7 +1374,7 @@
<0x13010000 0x13010000 0x1400>,
<0x13010800 0x13010800 0x100>,
<0x13011000 0x13011000 0x100>;
- gpum@0x13000000 {
+ gpum@13000000 {
compatible = "sirf,nocfw-gpum";
reg = <0x13000000 0x3000>;
};
@@ -1396,7 +1396,7 @@
#dma-cells = <1>;
#dma-channels = <1>;
};
- sdr@0x13010000 {
+ sdr@13010000 {
compatible = "sirf,atlas7-sdr";
reg = <0x13010000 0x1400>;
interrupts = <0 7 0>,
@@ -1432,7 +1432,7 @@
clocks = <&car 102>;
};
- mediam@170A0000 {
+ mediam@170a0000 {
compatible = "sirf,nocfw-mediam";
reg = <0x170A0000 0x3000>;
};
@@ -1740,7 +1740,7 @@
clocks = <&car 54>;
};
- audiom@10ED0000 {
+ audiom@10ed0000 {
compatible = "sirf,nocfw-audiom";
reg = <0x10ED0000 0x3000>;
interrupts = <0 102 0>;
@@ -1780,7 +1780,7 @@
interrupts = <0 105 0>;
};
- memory-controller@0x10800000 {
+ memory-controller@10800000 {
compatible = "sirf,atlas7-memc";
reg = <0x10800000 0x2000>;
};
@@ -1887,7 +1887,7 @@
};
};
- qspi: flash@188B0000 {
+ qspi: flash@188b0000 {
cell-index = <0>;
compatible = "sirf,atlas7-qspi-nor";
reg = <0x188B0000 0x10000>;
@@ -1896,7 +1896,7 @@
#size-cells = <0>;
};
- retain@0x188D0000 {
+ retain@188d0000 {
compatible = "sirf,atlas7-retain";
reg = <0x188D0000 0x1000>;
};
--
2.11.0
^ permalink raw reply related
* [PATCH 21/25] arm: realview: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mathieu Malaterre, Mark Rutland, Russell King,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
Suggested-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Mathieu Malaterre <malat-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
---
arch/arm/boot/dts/arm-realview-eb.dtsi | 32 +++++++++++++++----------------
arch/arm/boot/dts/arm-realview-pb1176.dts | 30 ++++++++++++++---------------
arch/arm/boot/dts/arm-realview-pb11mp.dts | 32 +++++++++++++++----------------
arch/arm/boot/dts/arm-realview-pbx.dtsi | 32 +++++++++++++++----------------
4 files changed, 63 insertions(+), 63 deletions(-)
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
index e2e9599596e2..bc07a1755073 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -51,13 +51,13 @@
regulator-boot-on;
};
- xtal24mhz: xtal24mhz@24M {
+ xtal24mhz: xtal24mhz@24m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
- timclk: timclk@1M {
+ timclk: timclk@1m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
@@ -65,7 +65,7 @@
clocks = <&xtal24mhz>;
};
- mclk: mclk@24M {
+ mclk: mclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -73,7 +73,7 @@
clocks = <&xtal24mhz>;
};
- kmiclk: kmiclk@24M {
+ kmiclk: kmiclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -81,7 +81,7 @@
clocks = <&xtal24mhz>;
};
- sspclk: sspclk@24M {
+ sspclk: sspclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -89,7 +89,7 @@
clocks = <&xtal24mhz>;
};
- uartclk: uartclk@24M {
+ uartclk: uartclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -97,7 +97,7 @@
clocks = <&xtal24mhz>;
};
- wdogclk: wdogclk@24M {
+ wdogclk: wdogclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -154,7 +154,7 @@
compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
- led@08.0 {
+ led@8.0 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x01>;
@@ -162,7 +162,7 @@
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8.1 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x02>;
@@ -170,7 +170,7 @@
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8.2 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x04>;
@@ -178,42 +178,42 @@
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8.3 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
default-state = "off";
};
- led@08.4 {
+ led@8.4 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
default-state = "off";
};
- led@08.5 {
+ led@8.5 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
default-state = "off";
};
- led@08.6 {
+ led@8.6 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8.7 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
default-state = "off";
};
- oscclk0: osc0@0c {
+ oscclk0: osc0@c {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index c789564f2803..658b27ba002b 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -61,13 +61,13 @@
regulator-boot-on;
};
- xtal24mhz: xtal24mhz@24M {
+ xtal24mhz: xtal24mhz@24m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
- timclk: timclk@1M {
+ timclk: timclk@1m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
@@ -75,7 +75,7 @@
clocks = <&xtal24mhz>;
};
- mclk: mclk@24M {
+ mclk: mclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -83,7 +83,7 @@
clocks = <&xtal24mhz>;
};
- kmiclk: kmiclk@24M {
+ kmiclk: kmiclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -91,7 +91,7 @@
clocks = <&xtal24mhz>;
};
- sspclk: sspclk@24M {
+ sspclk: sspclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -99,7 +99,7 @@
clocks = <&xtal24mhz>;
};
- uartclk: uartclk@24M {
+ uartclk: uartclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -172,7 +172,7 @@
compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
- led@08.0 {
+ led@8.0 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x01>;
@@ -180,7 +180,7 @@
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8.1 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x02>;
@@ -188,7 +188,7 @@
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8.2 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x04>;
@@ -196,42 +196,42 @@
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8.3 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
default-state = "off";
};
- led@08.4 {
+ led@8.4 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
default-state = "off";
};
- led@08.5 {
+ led@8.5 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
default-state = "off";
};
- led@08.6 {
+ led@8.6 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8.7 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
default-state = "off";
};
- oscclk0: osc0@0c {
+ oscclk0: osc0@c {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
index 3944765ac4b0..312b4ff5f2ea 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -161,7 +161,7 @@
regulator-boot-on;
};
- xtal24mhz: xtal24mhz@24M {
+ xtal24mhz: xtal24mhz@24m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -173,7 +173,7 @@
clock-frequency = <32768>;
};
- timclk: timclk@1M {
+ timclk: timclk@1m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
@@ -181,7 +181,7 @@
clocks = <&xtal24mhz>;
};
- mclk: mclk@24M {
+ mclk: mclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -189,7 +189,7 @@
clocks = <&xtal24mhz>;
};
- kmiclk: kmiclk@24M {
+ kmiclk: kmiclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -197,7 +197,7 @@
clocks = <&xtal24mhz>;
};
- sspclk: sspclk@24M {
+ sspclk: sspclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -205,7 +205,7 @@
clocks = <&xtal24mhz>;
};
- uartclk: uartclk@24M {
+ uartclk: uartclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -213,7 +213,7 @@
clocks = <&xtal24mhz>;
};
- wdogclk: wdogclk@24M {
+ wdogclk: wdogclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -253,7 +253,7 @@
compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
- led@08.0 {
+ led@8.0 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x01>;
@@ -261,7 +261,7 @@
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8.1 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x02>;
@@ -269,7 +269,7 @@
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8.2 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x04>;
@@ -277,7 +277,7 @@
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8.3 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x08>;
@@ -285,7 +285,7 @@
linux,default-trigger = "cpu1";
default-state = "off";
};
- led@08.4 {
+ led@8.4 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x10>;
@@ -293,7 +293,7 @@
linux,default-trigger = "cpu2";
default-state = "off";
};
- led@08.5 {
+ led@8.5 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x20>;
@@ -301,14 +301,14 @@
linux,default-trigger = "cpu3";
default-state = "off";
};
- led@08.6 {
+ led@8.6 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8.7 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x80>;
@@ -316,7 +316,7 @@
default-state = "off";
};
- oscclk0: osc0@0c {
+ oscclk0: osc0@c {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
index aeb49c4bd773..86c9eb94b5ad 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -59,7 +59,7 @@
regulator-boot-on;
};
- xtal24mhz: xtal24mhz@24M {
+ xtal24mhz: xtal24mhz@24m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -71,7 +71,7 @@
clock-frequency = <32768>;
};
- timclk: timclk@1M {
+ timclk: timclk@1m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
@@ -79,7 +79,7 @@
clocks = <&xtal24mhz>;
};
- mclk: mclk@24M {
+ mclk: mclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -87,7 +87,7 @@
clocks = <&xtal24mhz>;
};
- kmiclk: kmiclk@24M {
+ kmiclk: kmiclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -95,7 +95,7 @@
clocks = <&xtal24mhz>;
};
- sspclk: sspclk@24M {
+ sspclk: sspclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -103,7 +103,7 @@
clocks = <&xtal24mhz>;
};
- uartclk: uartclk@24M {
+ uartclk: uartclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -111,7 +111,7 @@
clocks = <&xtal24mhz>;
};
- wdogclk: wdogclk@24M {
+ wdogclk: wdogclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -169,7 +169,7 @@
compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
- led@08.0 {
+ led@8.0 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x01>;
@@ -177,7 +177,7 @@
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8.1 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x02>;
@@ -185,7 +185,7 @@
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8.2 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x04>;
@@ -193,42 +193,42 @@
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8.3 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
default-state = "off";
};
- led@08.4 {
+ led@8.4 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
default-state = "off";
};
- led@08.5 {
+ led@8.5 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
default-state = "off";
};
- led@08.6 {
+ led@8.6 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8.7 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
default-state = "off";
};
- oscclk0: osc0@0c {
+ oscclk0: osc0@c {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH 20/25] arm: kirkwood: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mathieu Malaterre, Jason Cooper, Andrew Lunn, Gregory Clement,
Sebastian Hesselbarth, Mark Rutland, Russell King,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
Suggested-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Mathieu Malaterre <malat-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
---
arch/arm/boot/dts/kirkwood-linksys-viper.dts | 10 +++++-----
arch/arm/boot/dts/kirkwood-ns2-common.dtsi | 2 +-
arch/arm/boot/dts/kirkwood-ts219.dtsi | 2 +-
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
index df7851820507..f21a50dd9869 100644
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
@@ -157,7 +157,7 @@
reg = <0x80000 0x20000>;
};
- partition@A0000 {
+ partition@a0000 {
label = "s_env";
reg = <0xA0000 0x20000>;
};
@@ -167,17 +167,17 @@
reg = <0x200000 0x2A0000>;
};
- partition@4A0000 {
+ partition@4a0000 {
label = "rootfs";
reg = <0x4A0000 0x1760000>;
};
- partition@1C00000 {
+ partition@1c00000 {
label = "alt_kernel";
reg = <0x1C00000 0x2A0000>;
};
- partition@1EA0000 {
+ partition@1ea0000 {
label = "alt_rootfs";
reg = <0x1EA0000 0x1760000>;
};
@@ -187,7 +187,7 @@
reg = <0x3600000 0x4A00000>;
};
- partition@C0000 {
+ partition@c0000 {
label = "unused";
reg = <0xC0000 0x140000>;
};
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index 51530ea86622..dc52e3ca7536 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -84,7 +84,7 @@
&mdio {
status = "okay";
- ethphy0: ethernet-phy@X {
+ ethphy0: ethernet-phy@x {
/* overwrite reg property in board file */
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index a88eb22070a1..1d3a7fbe1ca9 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -85,7 +85,7 @@
&mdio {
status = "okay";
- ethphy0: ethernet-phy@X {
+ ethphy0: ethernet-phy@x {
/* overwrite reg property in board file */
};
};
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH 19/25] arm: mt7: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mathieu Malaterre, Matthias Brugger, Mark Rutland, Russell King,
linux-arm-kernel, linux-mediatek, devicetree, linux-kernel
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
arch/arm/boot/dts/mt7623n-rfb-nand.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
index 17c578f0d261..e66de8611650 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-nand.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
@@ -51,7 +51,7 @@
reg = <0x40000 0x80000>;
};
- partition@C0000 {
+ partition@c0000 {
label = "uboot-env";
reg = <0xC0000 0x40000>;
};
--
2.11.0
^ permalink raw reply related
* [PATCH 18/25] arm: am3/am4/dra7/omap: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mathieu Malaterre, Benoît Cousson, Tony Lindgren,
Mark Rutland, Russell King, linux-omap-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
Suggested-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Mathieu Malaterre <malat-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
---
arch/arm/boot/dts/am33xx.dtsi | 4 ++--
arch/arm/boot/dts/am3517.dtsi | 4 ++--
arch/arm/boot/dts/am4372.dtsi | 4 ++--
arch/arm/boot/dts/dra62x-j5eco-evm.dts | 8 ++++----
arch/arm/boot/dts/dra7.dtsi | 2 +-
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 8 ++++----
arch/arm/boot/dts/omap3-evm-37xx.dts | 8 ++++----
arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 8 ++++----
8 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index d37f95025807..6699fcb77509 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -496,7 +496,7 @@
status = "disabled";
};
- mailbox: mailbox@480C8000 {
+ mailbox: mailbox@480c8000 {
compatible = "ti,omap4-mailbox";
reg = <0x480C8000 0x200>;
interrupts = <77>;
@@ -991,7 +991,7 @@
dma-names = "tx", "rx";
};
- mcasp1: mcasp@4803C000 {
+ mcasp1: mcasp@4803c000 {
compatible = "ti,am33xx-mcasp-audio";
ti,hwmods = "mcasp1";
reg = <0x4803C000 0x2000>,
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index 00da3f2c4072..76994165fb3a 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -26,7 +26,7 @@
interrupt-names = "mc";
};
- davinci_emac: ethernet@0x5c000000 {
+ davinci_emac: ethernet@5c000000 {
compatible = "ti,am3517-emac";
ti,hwmods = "davinci_emac";
status = "disabled";
@@ -41,7 +41,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
};
- davinci_mdio: ethernet@0x5c030000 {
+ davinci_mdio: ethernet@5c030000 {
compatible = "ti,davinci_mdio";
ti,hwmods = "davinci_mdio";
status = "disabled";
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 4714a59fd86d..5aff7f01a513 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -325,7 +325,7 @@
status = "disabled";
};
- mailbox: mailbox@480C8000 {
+ mailbox: mailbox@480c8000 {
compatible = "ti,omap4-mailbox";
reg = <0x480C8000 0x200>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -936,7 +936,7 @@
dma-names = "tx", "rx";
};
- mcasp1: mcasp@4803C000 {
+ mcasp1: mcasp@4803c000 {
compatible = "ti,am33xx-mcasp-audio";
ti,hwmods = "mcasp1";
reg = <0x4803C000 0x2000>,
diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
index 155eb32ee213..fee0547f7302 100644
--- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts
+++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
@@ -74,19 +74,19 @@
label = "X-Loader";
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
- partition@0x1c0000 {
+ partition@1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
- partition@0x280000 {
+ partition@280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
- partition@0x780000 {
+ partition@780000 {
label = "Filesystem";
reg = <0x780000 0xf880000>;
};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index ac9216293b7c..f8f5206130d6 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1373,7 +1373,7 @@
ranges;
reg = <0x4a090000 0x20>;
ti,hwmods = "ocp2scp3";
- sata_phy: phy@4A096000 {
+ sata_phy: phy@4a096000 {
compatible = "ti,phy-pipe3-sata";
reg = <0x4A096000 0x80>, /* phy_rx */
<0x4A096400 0x64>, /* phy_tx */
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index ab6003fe5a43..9dcb18d22cde 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -306,19 +306,19 @@
label = "xloader";
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "uboot";
reg = <0x80000 0x1e0000>;
};
- partition@0x260000 {
+ partition@260000 {
label = "uboot environment";
reg = <0x260000 0x40000>;
};
- partition@0x2a0000 {
+ partition@2a0000 {
label = "linux";
reg = <0x2a0000 0x400000>;
};
- partition@0x6a0000 {
+ partition@6a0000 {
label = "rootfs";
reg = <0x6a0000 0x1f880000>;
};
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index 5a4ba0aea447..a14303b09ae2 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -90,19 +90,19 @@
label = "X-Loader";
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
- partition@0x1c0000 {
+ partition@1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
- partition@0x280000 {
+ partition@280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
- partition@0x780000 {
+ partition@780000 {
label = "Filesystem";
reg = <0x780000 0x1f880000>;
};
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index 7ada1e93e166..cf7a2a72348d 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -405,22 +405,22 @@
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "u-boot";
reg = <0x80000 0x1e0000>;
};
- partition@0x260000 {
+ partition@260000 {
label = "u-boot-environment";
reg = <0x260000 0x20000>;
};
- partition@0x280000 {
+ partition@280000 {
label = "kernel";
reg = <0x280000 0x500000>;
};
- partition@0x780000 {
+ partition@780000 {
label = "filesystem";
reg = <0x780000 0xf880000>;
};
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH 17/25] arm: rk3: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mathieu Malaterre, Heiko Stuebner, Mark Rutland, Russell King,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
Suggested-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Mathieu Malaterre <malat-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
---
arch/arm/boot/dts/rk3288.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index cd24894ee5c6..3d81281be280 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -744,7 +744,7 @@
* *_HDMI HDMI
* *_MIPI_* MIPI
*/
- pd_vio@RK3288_PD_VIO {
+ pd_vio@rk3288_pd_vio {
reg = <RK3288_PD_VIO>;
clocks = <&cru ACLK_IEP>,
<&cru ACLK_ISP>,
@@ -786,7 +786,7 @@
* Note: The following 3 are HEVC(H.265) clocks,
* and on the ACLK_HEVC_NIU (NOC).
*/
- pd_hevc@RK3288_PD_HEVC {
+ pd_hevc@rk3288_pd_hevc {
reg = <RK3288_PD_HEVC>;
clocks = <&cru ACLK_HEVC>,
<&cru SCLK_HEVC_CABAC>,
@@ -800,7 +800,7 @@
* (video endecoder & decoder) clocks that on the
* ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
*/
- pd_video@RK3288_PD_VIDEO {
+ pd_video@rk3288_pd_video {
reg = <RK3288_PD_VIDEO>;
clocks = <&cru ACLK_VCODEC>,
<&cru HCLK_VCODEC>;
@@ -811,7 +811,7 @@
* Note: ACLK_GPU is the GPU clock,
* and on the ACLK_GPU_NIU (NOC).
*/
- pd_gpu@RK3288_PD_GPU {
+ pd_gpu@rk3288_pd_gpu {
reg = <RK3288_PD_GPU>;
clocks = <&cru ACLK_GPU>;
pm_qos = <&qos_gpu_r>,
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH 16/25] arm: zx: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mathieu Malaterre, Jun Nie, Baoyou Xie, Shawn Guo, Mark Rutland,
Russell King, linux-arm-kernel, devicetree, linux-kernel
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
arch/arm/boot/dts/zx296702.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/zx296702.dtsi b/arch/arm/boot/dts/zx296702.dtsi
index 8a74efdb6360..240e7a23d81f 100644
--- a/arch/arm/boot/dts/zx296702.dtsi
+++ b/arch/arm/boot/dts/zx296702.dtsi
@@ -56,7 +56,7 @@
clocks = <&topclk ZX296702_A9_PERIPHCLK>;
};
- l2cc: l2-cache-controller@0x00c00000 {
+ l2cc: l2-cache-controller@c00000 {
compatible = "arm,pl310-cache";
reg = <0x00c00000 0x1000>;
cache-unified;
@@ -67,30 +67,30 @@
arm,double-linefill-incr = <0>;
};
- pcu: pcu@0xa0008000 {
+ pcu: pcu@a0008000 {
compatible = "zte,zx296702-pcu";
reg = <0xa0008000 0x1000>;
};
- topclk: topclk@0x09800000 {
+ topclk: topclk@9800000 {
compatible = "zte,zx296702-topcrm-clk";
reg = <0x09800000 0x1000>;
#clock-cells = <1>;
};
- lsp1clk: lsp1clk@0x09400000 {
+ lsp1clk: lsp1clk@9400000 {
compatible = "zte,zx296702-lsp1crpm-clk";
reg = <0x09400000 0x1000>;
#clock-cells = <1>;
};
- lsp0clk: lsp0clk@0x0b000000 {
+ lsp0clk: lsp0clk@b000000 {
compatible = "zte,zx296702-lsp0crpm-clk";
reg = <0x0b000000 0x1000>;
#clock-cells = <1>;
};
- uart0: serial@0x09405000 {
+ uart0: serial@9405000 {
compatible = "zte,zx296702-uart";
reg = <0x09405000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -98,7 +98,7 @@
status = "disabled";
};
- uart1: serial@0x09406000 {
+ uart1: serial@9406000 {
compatible = "zte,zx296702-uart";
reg = <0x09406000 0x1000>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -106,7 +106,7 @@
status = "disabled";
};
- mmc0: mmc@0x09408000 {
+ mmc0: mmc@9408000 {
compatible = "snps,dw-mshc";
#address-cells = <1>;
#size-cells = <0>;
@@ -119,7 +119,7 @@
status = "disabled";
};
- mmc1: mmc@0x0b003000 {
+ mmc1: mmc@b003000 {
compatible = "snps,dw-mshc";
#address-cells = <1>;
#size-cells = <0>;
@@ -132,7 +132,7 @@
status = "disabled";
};
- sysctrl: sysctrl@0xa0007000 {
+ sysctrl: sysctrl@a0007000 {
compatible = "zte,sysctrl", "syscon";
reg = <0xa0007000 0x1000>;
};
--
2.11.0
^ permalink raw reply related
* [PATCH 15/25] arm: versatile: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Rutland, devicetree, Mathieu Malaterre, linux-kernel,
Russell King, linux-arm-kernel
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
arch/arm/boot/dts/versatile-ab.dts | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 4a51612996bc..2f60ecd7741e 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -24,7 +24,7 @@
reg = <0x0 0x08000000>;
};
- xtal24mhz: xtal24mhz@24M {
+ xtal24mhz: xtal24mhz@24m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -34,7 +34,7 @@
compatible = "arm,core-module-versatile", "syscon", "simple-mfd";
reg = <0x10000000 0x200>;
- led@08.0 {
+ led@8.0 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x01>;
@@ -42,7 +42,7 @@
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8.1 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x02>;
@@ -50,7 +50,7 @@
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8.2 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x04>;
@@ -58,35 +58,35 @@
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8.3 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
default-state = "off";
};
- led@08.4 {
+ led@8.4 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
default-state = "off";
};
- led@08.5 {
+ led@8.5 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
default-state = "off";
};
- led@08.6 {
+ led@8.6 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8.7 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x80>;
@@ -95,14 +95,14 @@
};
/* OSC1 on AB, OSC4 on PB */
- osc1: cm_aux_osc@24M {
+ osc1: cm_aux_osc@24m {
#clock-cells = <0>;
compatible = "arm,versatile-cm-auxosc";
clocks = <&xtal24mhz>;
};
/* The timer clock is the 24 MHz oscillator divided to 1MHz */
- timclk: timclk@1M {
+ timclk: timclk@1m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
@@ -110,7 +110,7 @@
clocks = <&xtal24mhz>;
};
- pclk: pclk@24M {
+ pclk: pclk@24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
--
2.11.0
^ permalink raw reply related
* [PATCH 14/25] arm: stm32: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Rutland, devicetree, Alexandre Torgue, Mathieu Malaterre,
Russell King, linux-kernel, Maxime Coquelin, linux-arm-kernel
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
arch/arm/boot/dts/stm32h743.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index bbfcbaca0b36..a559d8b6a4a3 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -304,7 +304,7 @@
};
};
- vrefbuf: regulator@58003C00 {
+ vrefbuf: regulator@58003c00 {
compatible = "st,stm32-vrefbuf";
reg = <0x58003C00 0x8>;
clocks = <&rcc VREF_CK>;
--
2.11.0
^ permalink raw reply related
* [PATCH 13/25] arm: spear: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mathieu Malaterre, Viresh Kumar, Shiraz Hashim, Mark Rutland,
Russell King, linux-arm-kernel, devicetree, linux-kernel
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
arch/arm/boot/dts/spear1310-evb.dts | 4 ++--
arch/arm/boot/dts/spear300.dtsi | 2 +-
arch/arm/boot/dts/spear310.dtsi | 2 +-
arch/arm/boot/dts/spear320-hmi.dts | 4 ++--
arch/arm/boot/dts/spear320.dtsi | 2 +-
5 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index 84101e4eebbf..438e3e16aeda 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -133,7 +133,7 @@
label = "u-boot";
reg = <0x80000 0x140000>;
};
- partition@1C0000 {
+ partition@1c0000 {
label = "environment";
reg = <0x1C0000 0x40000>;
};
@@ -145,7 +145,7 @@
label = "linux";
reg = <0x240000 0xC00000>;
};
- partition@E40000 {
+ partition@e40000 {
label = "rootfs";
reg = <0xE40000 0x0>;
};
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
index f4e92e599729..266fefa67223 100644
--- a/arch/arm/boot/dts/spear300.dtsi
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -52,7 +52,7 @@
status = "disabled";
};
- shirq: interrupt-controller@0x50000000 {
+ shirq: interrupt-controller@50000000 {
compatible = "st,spear300-shirq";
reg = <0x50000000 0x1000>;
interrupts = <28>;
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
index da210b454753..f995ecf09acf 100644
--- a/arch/arm/boot/dts/spear310.dtsi
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -40,7 +40,7 @@
status = "disabled";
};
- shirq: interrupt-controller@0xb4000000 {
+ shirq: interrupt-controller@b4000000 {
compatible = "st,spear310-shirq";
reg = <0xb4000000 0x1000>;
interrupts = <28 29 30 1>;
diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts
index 0d0da1f65f0e..6591cd616d0e 100644
--- a/arch/arm/boot/dts/spear320-hmi.dts
+++ b/arch/arm/boot/dts/spear320-hmi.dts
@@ -113,7 +113,7 @@
label = "u-boot";
reg = <0x80000 0x140000>;
};
- partition@1C0000 {
+ partition@1c0000 {
label = "environment";
reg = <0x1C0000 0x40000>;
};
@@ -125,7 +125,7 @@
label = "linux";
reg = <0x240000 0xC00000>;
};
- partition@E40000 {
+ partition@e40000 {
label = "rootfs";
reg = <0xE40000 0x0>;
};
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
index 22be6e5edaac..2a062a3ee139 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -55,7 +55,7 @@
status = "disabled";
};
- shirq: interrupt-controller@0xb3000000 {
+ shirq: interrupt-controller@b3000000 {
compatible = "st,spear320-shirq";
reg = <0xb3000000 0x1000>;
interrupts = <30 28 29 1>;
--
2.11.0
^ permalink raw reply related
* [PATCH 12/25] arm: socfpga: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Rutland, devicetree, Mathieu Malaterre, Russell King,
linux-kernel, Dinh Nguyen, linux-arm-kernel
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
arch/arm/boot/dts/socfpga.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 7e24dc8e82d4..36f87eb389b1 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -724,7 +724,7 @@
arm,prefetch-offset = <7>;
};
- l3regs@0xff800000 {
+ l3regs@ff800000 {
compatible = "altr,l3regs", "syscon";
reg = <0xff800000 0x1000>;
};
--
2.11.0
^ permalink raw reply related
* [PATCH 11/25] arm: prima2: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Rutland, devicetree, Barry Song, Mathieu Malaterre,
Russell King, linux-kernel, linux-arm-kernel
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
arch/arm/boot/dts/prima2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
index 1ca1a9aa953f..0b6e37da9a9e 100644
--- a/arch/arm/boot/dts/prima2.dtsi
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -309,7 +309,7 @@
#dma-cells = <1>;
};
- vip@b00C0000 {
+ vip@b00c0000 {
compatible = "sirf,prima2-vip";
reg = <0xb00C0000 0x10000>;
clocks = <&clks 31>;
--
2.11.0
^ permalink raw reply related
* [PATCH 10/25] arm: orion5x: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mathieu Malaterre, Jason Cooper, Andrew Lunn,
Sebastian Hesselbarth, Gregory Clement, Mark Rutland,
Russell King, linux-arm-kernel, devicetree, linux-kernel
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
arch/arm/boot/dts/orion5x-linkstation.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi
index e9991c83d7b7..7e418539fa54 100644
--- a/arch/arm/boot/dts/orion5x-linkstation.dtsi
+++ b/arch/arm/boot/dts/orion5x-linkstation.dtsi
@@ -126,7 +126,7 @@
read-only;
};
- uboot_env@3F000 {
+ uboot_env@3f000 {
reg = <0x3F000 0x1000>;
};
};
--
2.11.0
^ permalink raw reply related
* [PATCH 09/25] arm: nspire: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Rutland, devicetree, Mathieu Malaterre, linux-kernel,
Russell King, linux-arm-kernel
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
arch/arm/boot/dts/nspire-classic.dtsi | 2 +-
arch/arm/boot/dts/nspire-cx.dts | 2 +-
arch/arm/boot/dts/nspire.dtsi | 28 ++++++++++++++--------------
3 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi
index 4907c5085d4b..84db1986001c 100644
--- a/arch/arm/boot/dts/nspire-classic.dtsi
+++ b/arch/arm/boot/dts/nspire-classic.dtsi
@@ -66,7 +66,7 @@
#address-cells = <1>;
#size-cells = <1>;
- intc: interrupt-controller@DC000000 {
+ intc: interrupt-controller@dc000000 {
compatible = "lsi,zevio-intc";
interrupt-controller;
reg = <0xDC000000 0x1000>;
diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts
index 08e0b81b3385..bf58fe095f19 100644
--- a/arch/arm/boot/dts/nspire-cx.dts
+++ b/arch/arm/boot/dts/nspire-cx.dts
@@ -92,7 +92,7 @@
#address-cells = <1>;
#size-cells = <1>;
- intc: interrupt-controller@DC000000 {
+ intc: interrupt-controller@dc000000 {
compatible = "arm,pl190-vic";
interrupt-controller;
reg = <0xDC000000 0x1000>;
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
index 1a5ae4cd107f..88b9126fad9f 100644
--- a/arch/arm/boot/dts/nspire.dtsi
+++ b/arch/arm/boot/dts/nspire.dtsi
@@ -24,7 +24,7 @@
reg = <0x00000000 0x80000>;
};
- sram: sram@A4000000 {
+ sram: sram@a4000000 {
device = "memory";
reg = <0xA4000000 0x20000>;
};
@@ -75,11 +75,11 @@
#size-cells = <1>;
ranges;
- spi: spi@A9000000 {
+ spi: spi@a9000000 {
reg = <0xA9000000 0x1000>;
};
- usb0: usb@B0000000 {
+ usb0: usb@b0000000 {
compatible = "lsi,zevio-usb";
reg = <0xB0000000 0x1000>;
interrupts = <8>;
@@ -88,13 +88,13 @@
vbus-supply = <&vbus_reg>;
};
- usb1: usb@B4000000 {
+ usb1: usb@b4000000 {
reg = <0xB4000000 0x1000>;
interrupts = <9>;
status = "disabled";
};
- lcd: lcd@C0000000 {
+ lcd: lcd@c0000000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0xC0000000 0x1000>;
interrupts = <21>;
@@ -103,16 +103,16 @@
clock-names = "apb_pclk";
};
- adc: adc@C4000000 {
+ adc: adc@c4000000 {
reg = <0xC4000000 0x1000>;
interrupts = <11>;
};
- tdes: crypto@C8010000 {
+ tdes: crypto@c8010000 {
reg = <0xC8010000 0x1000>;
};
- sha256: crypto@CC000000 {
+ sha256: crypto@cc000000 {
reg = <0xCC000000 0x1000>;
};
@@ -141,13 +141,13 @@
interrupts = <1>;
};
- timer0: timer@900C0000 {
+ timer0: timer@900c0000 {
reg = <0x900C0000 0x1000>;
clocks = <&timer_clk>;
};
- timer1: timer@900D0000 {
+ timer1: timer@900d0000 {
reg = <0x900D0000 0x1000>;
interrupts = <19>;
@@ -165,16 +165,16 @@
interrupts = <4>;
};
- misc: misc@900A0000 {
+ misc: misc@900a0000 {
reg = <0x900A0000 0x1000>;
};
- pwr: pwr@900B0000 {
+ pwr: pwr@900b0000 {
reg = <0x900B0000 0x1000>;
interrupts = <15>;
};
- keypad: input@900E0000 {
+ keypad: input@900e0000 {
compatible = "ti,nspire-keypad";
reg = <0x900E0000 0x1000>;
interrupts = <16>;
@@ -185,7 +185,7 @@
clocks = <&apb_pclk>;
};
- contrast: contrast@900F0000 {
+ contrast: contrast@900f0000 {
reg = <0x900F0000 0x1000>;
};
--
2.11.0
^ permalink raw reply related
* [PATCH 08/25] arm: lpc32: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Rutland, devicetree, Mathieu Malaterre, linux-kernel,
Russell King, Vladimir Zapolskiy, Sylvain Lemieux,
linux-arm-kernel
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
arch/arm/boot/dts/lpc32xx.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index abff7ef7c9cd..4981741377f3 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -230,7 +230,7 @@
status = "disabled";
};
- i2s1: i2s@2009C000 {
+ i2s1: i2s@2009c000 {
compatible = "nxp,lpc3220-i2s";
reg = <0x2009C000 0x1000>;
};
@@ -273,7 +273,7 @@
status = "disabled";
};
- i2c1: i2c@400A0000 {
+ i2c1: i2c@400a0000 {
compatible = "nxp,pnx-i2c";
reg = <0x400A0000 0x100>;
interrupt-parent = <&sic1>;
@@ -284,7 +284,7 @@
clocks = <&clk LPC32XX_CLK_I2C1>;
};
- i2c2: i2c@400A8000 {
+ i2c2: i2c@400a8000 {
compatible = "nxp,pnx-i2c";
reg = <0x400A8000 0x100>;
interrupt-parent = <&sic1>;
@@ -295,7 +295,7 @@
clocks = <&clk LPC32XX_CLK_I2C2>;
};
- mpwm: mpwm@400E8000 {
+ mpwm: mpwm@400e8000 {
compatible = "nxp,lpc3220-motor-pwm";
reg = <0x400E8000 0x78>;
status = "disabled";
@@ -394,7 +394,7 @@
#gpio-cells = <3>; /* bank, pin, flags */
};
- timer4: timer@4002C000 {
+ timer4: timer@4002c000 {
compatible = "nxp,lpc3220-timer";
reg = <0x4002C000 0x1000>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -412,7 +412,7 @@
status = "disabled";
};
- watchdog: watchdog@4003C000 {
+ watchdog: watchdog@4003c000 {
compatible = "nxp,pnx4008-wdt";
reg = <0x4003C000 0x1000>;
clocks = <&clk LPC32XX_CLK_WDOG>;
@@ -451,7 +451,7 @@
status = "disabled";
};
- timer1: timer@4004C000 {
+ timer1: timer@4004c000 {
compatible = "nxp,lpc3220-timer";
reg = <0x4004C000 0x1000>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
@@ -475,7 +475,7 @@
status = "disabled";
};
- pwm1: pwm@4005C000 {
+ pwm1: pwm@4005c000 {
compatible = "nxp,lpc3220-pwm";
reg = <0x4005C000 0x4>;
clocks = <&clk LPC32XX_CLK_PWM1>;
@@ -484,7 +484,7 @@
status = "disabled";
};
- pwm2: pwm@4005C004 {
+ pwm2: pwm@4005c004 {
compatible = "nxp,lpc3220-pwm";
reg = <0x4005C004 0x4>;
clocks = <&clk LPC32XX_CLK_PWM2>;
--
2.11.0
^ permalink raw reply related
* [PATCH 07/25] arm: keystone: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Rutland, devicetree, Mathieu Malaterre, Russell King,
linux-kernel, Santosh Shilimkar, linux-arm-kernel
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
arch/arm/boot/dts/keystone-k2e-netcp.dtsi | 2 +-
arch/arm/boot/dts/keystone-k2hk-netcp.dtsi | 2 +-
arch/arm/boot/dts/keystone-k2l-netcp.dtsi | 2 +-
arch/arm/boot/dts/keystone.dtsi | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
index ba828cb59587..940b64935bde 100644
--- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
@@ -98,7 +98,7 @@ qmss: qmss@2a40000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
- pdsp0@0x2a10000 {
+ pdsp0@2a10000 {
reg = <0x2a10000 0x1000 /*iram */
0x2a0f000 0x100 /*reg*/
0x2a0c000 0x3c8 /*intd */
diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
index a5ac845464bf..ed7287a274a0 100644
--- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
@@ -115,7 +115,7 @@ qmss: qmss@2a40000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
- pdsp0@0x2a10000 {
+ pdsp0@2a10000 {
reg = <0x2a10000 0x1000 /*iram */
0x2a0f000 0x100 /*reg*/
0x2a0c000 0x3c8 /*intd */
diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
index 66f615a74118..b6af5f78e498 100644
--- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
@@ -97,7 +97,7 @@ qmss: qmss@2a40000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
- pdsp0@0x2a10000 {
+ pdsp0@2a10000 {
reg = <0x2a10000 0x1000 /*iram */
0x2a0f000 0x100 /*reg*/
0x2a0c000 0x3c8 /*intd */
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index 06e10544f9b1..f8ecbe504182 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -271,7 +271,7 @@
ti,davinci-gpio-unbanked = <32>;
};
- aemif: aemif@21000A00 {
+ aemif: aemif@21000a00 {
compatible = "ti,keystone-aemif", "ti,davinci-aemif";
#address-cells = <2>;
#size-cells = <1>;
--
2.11.0
^ permalink raw reply related
* [PATCH 06/25] arm: integrator: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mathieu Malaterre, Mark Rutland, Russell King, devicetree,
linux-arm-kernel, linux-kernel
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
arch/arm/boot/dts/integratorap.dts | 14 +++++++-------
arch/arm/boot/dts/integratorcp.dts | 20 ++++++++++----------
2 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index 94d2ff9836d0..9efc753acb6d 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -56,7 +56,7 @@
};
/* 24 MHz chrystal on the Integrator/AP development board */
- xtal24mhz: xtal24mhz@24M {
+ xtal24mhz: xtal24mhz@24m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -71,7 +71,7 @@
};
/* The UART clock is 14.74 MHz divided by an ICS525 */
- uartclk: uartclk@14.74M {
+ uartclk: uartclk@14.74m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <14745600>;
@@ -80,14 +80,14 @@
core-module@10000000 {
/* 24 MHz chrystal on the core module */
- cm24mhz: cm24mhz@24M {
+ cm24mhz: cm24mhz@24m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
/* Oscillator on the core module, clocks the CPU core */
- cmosc: cmosc@24M {
+ cmosc: cmosc@24m {
compatible = "arm,syscon-icst525-integratorap-cm";
#clock-cells = <0>;
lock-offset = <0x14>;
@@ -96,7 +96,7 @@
};
/* Auxilary oscillator on the core module, 32.369MHz at boot */
- auxosc: auxosc@24M {
+ auxosc: auxosc@24m {
compatible = "arm,syscon-icst525";
#clock-cells = <0>;
lock-offset = <0x14>;
@@ -116,7 +116,7 @@
* SYSCLK clocks PCIv3 bridge, system controller and the
* logic modules.
*/
- sysclk: apsys@24M {
+ sysclk: apsys@24m {
compatible = "arm,syscon-icst525-integratorap-sys";
#clock-cells = <0>;
lock-offset = <0x1c>;
@@ -125,7 +125,7 @@
};
/* One-bit control for the PCI bus clock (33 or 25 MHz) */
- pciclk: pciclk@24M {
+ pciclk: pciclk@24m {
compatible = "arm,syscon-icst525-integratorap-pci";
#clock-cells = <0>;
lock-offset = <0x1c>;
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
index a185ab8759fa..76c41a04e8a0 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -47,14 +47,14 @@
*/
/* The codec chrystal operates at 24.576 MHz */
- xtal_codec: xtal24.576@24.576M {
+ xtal_codec: xtal24.576@24.576m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24576000>;
};
/* The chrystal is divided by 2 by the codec for the AACI bit clock */
- aaci_bitclk: aaci_bitclk@12.288M {
+ aaci_bitclk: aaci_bitclk@12.288m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <2>;
@@ -63,14 +63,14 @@
};
/* This is a 25MHz chrystal on the base board */
- xtal25mhz: xtal25mhz@25M {
+ xtal25mhz: xtal25mhz@25m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
};
/* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
- uartclk: uartclk@14.74M {
+ uartclk: uartclk@14.74m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <14745600>;
@@ -85,14 +85,14 @@
core-module@10000000 {
/* 24 MHz chrystal on the core module */
- cm24mhz: cm24mhz@24M {
+ cm24mhz: cm24mhz@24m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
/* Oscillator on the core module, clocks the CPU core */
- cmcore: cmosc@24M {
+ cmcore: cmosc@24m {
compatible = "arm,syscon-icst525-integratorcp-cm-core";
#clock-cells = <0>;
lock-offset = <0x14>;
@@ -101,7 +101,7 @@
};
/* Oscillator on the core module, clocks the memory bus */
- cmmem: cmosc@24M {
+ cmmem: cmosc@24m {
compatible = "arm,syscon-icst525-integratorcp-cm-mem";
#clock-cells = <0>;
lock-offset = <0x14>;
@@ -110,7 +110,7 @@
};
/* Auxilary oscillator on the core module, clocks the CLCD */
- auxosc: auxosc@24M {
+ auxosc: auxosc@24m {
compatible = "arm,syscon-icst525";
#clock-cells = <0>;
lock-offset = <0x14>;
@@ -119,7 +119,7 @@
};
/* The KMI clock is the 24 MHz oscillator divided to 8MHz */
- kmiclk: kmiclk@1M {
+ kmiclk: kmiclk@1m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <3>;
@@ -128,7 +128,7 @@
};
/* The timer clock is the 24 MHz oscillator divided to 1MHz */
- timclk: timclk@1M {
+ timclk: timclk@1m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
--
2.11.0
^ permalink raw reply related
* [PATCH 05/25] arm: imx: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mathieu Malaterre, Shawn Guo, Sascha Hauer, Fabio Estevam,
Mark Rutland, Russell King, linux-arm-kernel, devicetree,
linux-kernel
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
arch/arm/boot/dts/imx6q-display5.dtsi | 2 +-
arch/arm/boot/dts/imx7d.dtsi | 2 +-
arch/arm/boot/dts/imx7s.dtsi | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi
index 4084de43d4d9..09085fde3341 100644
--- a/arch/arm/boot/dts/imx6q-display5.dtsi
+++ b/arch/arm/boot/dts/imx6q-display5.dtsi
@@ -255,7 +255,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- codec: tfa9879@6C {
+ codec: tfa9879@6c {
#sound-dai-cells = <0>;
compatible = "nxp,tfa9879";
reg = <0x6C>;
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 4d308d17f040..369d5a166b3e 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -129,7 +129,7 @@
status = "disabled";
};
- pcie: pcie@0x33800000 {
+ pcie: pcie@33800000 {
compatible = "fsl,imx7d-pcie", "snps,dw-pcie";
reg = <0x33800000 0x4000>,
<0x4ff00000 0x80000>;
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 82ad26e766eb..a00ba897e58d 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -583,7 +583,7 @@
#address-cells = <1>;
#size-cells = <0>;
- pgc_pcie_phy: pgc-power-domain@IMX7_POWER_DOMAIN_PCIE_PHY {
+ pgc_pcie_phy: pgc-power-domain@imx7_power_domain_pcie_phy {
#power-domain-cells = <0>;
reg = <IMX7_POWER_DOMAIN_PCIE_PHY>;
power-supply = <®_1p0d>;
--
2.11.0
^ permalink raw reply related
* [PATCH 04/25] arm: exynos/s3c: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre @ 2017-12-15 12:46 UTC (permalink / raw)
To: Rob Herring
Cc: Mathieu Malaterre, Mark Rutland, Russell King, Kukjin Kim,
Krzysztof Kozlowski, devicetree, linux-arm-kernel,
linux-samsung-soc, linux-kernel
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
arch/arm/boot/dts/exynos3250.dtsi | 34 ++++++------
arch/arm/boot/dts/exynos4.dtsi | 56 +++++++++----------
arch/arm/boot/dts/exynos4210.dtsi | 8 +--
arch/arm/boot/dts/exynos4412-pinctrl.dtsi | 2 +-
arch/arm/boot/dts/exynos4412.dtsi | 22 ++++----
arch/arm/boot/dts/exynos5.dtsi | 22 ++++----
arch/arm/boot/dts/exynos5250.dtsi | 64 +++++++++++-----------
arch/arm/boot/dts/exynos5260.dtsi | 26 ++++-----
arch/arm/boot/dts/exynos5420.dtsi | 78 +++++++++++++--------------
arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 2 +-
arch/arm/boot/dts/exynos5440.dtsi | 14 ++---
arch/arm/boot/dts/s3c2416.dtsi | 8 +--
12 files changed, 168 insertions(+), 168 deletions(-)
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 2bd3872221a1..8d47571b3984 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -164,31 +164,31 @@
syscon = <&pmu_system_controller>;
};
- pd_cam: cam-power-domain@10023C00 {
+ pd_cam: cam-power-domain@10023c00 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023C00 0x20>;
#power-domain-cells = <0>;
};
- pd_mfc: mfc-power-domain@10023C40 {
+ pd_mfc: mfc-power-domain@10023c40 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023C40 0x20>;
#power-domain-cells = <0>;
};
- pd_g3d: g3d-power-domain@10023C60 {
+ pd_g3d: g3d-power-domain@10023c60 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023C60 0x20>;
#power-domain-cells = <0>;
};
- pd_lcd0: lcd0-power-domain@10023C80 {
+ pd_lcd0: lcd0-power-domain@10023c80 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023C80 0x20>;
#power-domain-cells = <0>;
};
- pd_isp: isp-power-domain@10023CA0 {
+ pd_isp: isp-power-domain@10023ca0 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023CA0 0x20>;
#power-domain-cells = <0>;
@@ -204,7 +204,7 @@
<&cmu CLK_FIN_PLL>;
};
- cmu_dmc: clock-controller@105C0000 {
+ cmu_dmc: clock-controller@105c0000 {
compatible = "samsung,exynos3250-cmu-dmc";
reg = <0x105C0000 0x2000>;
#clock-cells = <1>;
@@ -219,7 +219,7 @@
status = "disabled";
};
- tmu: tmu@100C0000 {
+ tmu: tmu@100c0000 {
compatible = "samsung,exynos3250-tmu";
reg = <0x100C0000 0x100>;
interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
@@ -287,7 +287,7 @@
status = "disabled";
};
- sysmmu_jpeg: sysmmu@11A60000 {
+ sysmmu_jpeg: sysmmu@11a60000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11a60000 0x1000>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
@@ -313,7 +313,7 @@
status = "disabled";
};
- dsi_0: dsi@11C80000 {
+ dsi_0: dsi@11c80000 {
compatible = "samsung,exynos3250-mipi-dsi";
reg = <0x11C80000 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -328,7 +328,7 @@
status = "disabled";
};
- sysmmu_fimd0: sysmmu@11E20000 {
+ sysmmu_fimd0: sysmmu@11e20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11e20000 0x1000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
@@ -386,7 +386,7 @@
status = "disabled";
};
- exynos_usbphy: exynos-usbphy@125B0000 {
+ exynos_usbphy: exynos-usbphy@125b0000 {
compatible = "samsung,exynos3250-usb2-phy";
reg = <0x125B0000 0x100>;
samsung,pmureg-phandle = <&pmu_system_controller>;
@@ -425,7 +425,7 @@
};
};
- adc: adc@126C0000 {
+ adc: adc@126c0000 {
compatible = "samsung,exynos3250-adc",
"samsung,exynos-adc-v2";
reg = <0x126C0000 0x100>;
@@ -544,7 +544,7 @@
status = "disabled";
};
- i2c_4: i2c@138A0000 {
+ i2c_4: i2c@138a0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -557,7 +557,7 @@
status = "disabled";
};
- i2c_5: i2c@138B0000 {
+ i2c_5: i2c@138b0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -570,7 +570,7 @@
status = "disabled";
};
- i2c_6: i2c@138C0000 {
+ i2c_6: i2c@138c0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -583,7 +583,7 @@
status = "disabled";
};
- i2c_7: i2c@138D0000 {
+ i2c_7: i2c@138d0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -641,7 +641,7 @@
status = "disabled";
};
- pwm: pwm@139D0000 {
+ pwm: pwm@139d0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x139D0000 0x1000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 4768b086ed67..d40fcf7bd273 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -101,28 +101,28 @@
syscon = <&pmu_system_controller>;
};
- pd_mfc: mfc-power-domain@10023C40 {
+ pd_mfc: mfc-power-domain@10023c40 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023C40 0x20>;
#power-domain-cells = <0>;
label = "MFC";
};
- pd_g3d: g3d-power-domain@10023C60 {
+ pd_g3d: g3d-power-domain@10023c60 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023C60 0x20>;
#power-domain-cells = <0>;
label = "G3D";
};
- pd_lcd0: lcd0-power-domain@10023C80 {
+ pd_lcd0: lcd0-power-domain@10023c80 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023C80 0x20>;
#power-domain-cells = <0>;
label = "LCD0";
};
- pd_tv: tv-power-domain@10023C20 {
+ pd_tv: tv-power-domain@10023c20 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023C20 0x20>;
#power-domain-cells = <0>;
@@ -130,21 +130,21 @@
label = "TV";
};
- pd_cam: cam-power-domain@10023C00 {
+ pd_cam: cam-power-domain@10023c00 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023C00 0x20>;
#power-domain-cells = <0>;
label = "CAM";
};
- pd_gps: gps-power-domain@10023CE0 {
+ pd_gps: gps-power-domain@10023ce0 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023CE0 0x20>;
#power-domain-cells = <0>;
label = "GPS";
};
- pd_gps_alive: gps-alive-power-domain@10023D00 {
+ pd_gps_alive: gps-alive-power-domain@10023d00 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023D00 0x20>;
#power-domain-cells = <0>;
@@ -184,7 +184,7 @@
interrupt-parent = <&gic>;
};
- dsi_0: dsi@11C80000 {
+ dsi_0: dsi@11c80000 {
compatible = "samsung,exynos4210-mipi-dsi";
reg = <0x11C80000 0x10000>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -297,7 +297,7 @@
status = "disabled";
};
- keypad: keypad@100A0000 {
+ keypad: keypad@100a0000 {
compatible = "samsung,s5pv210-keypad";
reg = <0x100A0000 0x100>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
@@ -342,7 +342,7 @@
status = "disabled";
};
- exynos_usbphy: exynos-usbphy@125B0000 {
+ exynos_usbphy: exynos-usbphy@125b0000 {
compatible = "samsung,exynos4210-usb2-phy";
reg = <0x125B0000 0x100>;
samsung,pmureg-phandle = <&pmu_system_controller>;
@@ -538,7 +538,7 @@
status = "disabled";
};
- i2c_4: i2c@138A0000 {
+ i2c_4: i2c@138a0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -551,7 +551,7 @@
status = "disabled";
};
- i2c_5: i2c@138B0000 {
+ i2c_5: i2c@138b0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -564,7 +564,7 @@
status = "disabled";
};
- i2c_6: i2c@138C0000 {
+ i2c_6: i2c@138c0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -577,7 +577,7 @@
status = "disabled";
};
- i2c_7: i2c@138D0000 {
+ i2c_7: i2c@138d0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -590,7 +590,7 @@
status = "disabled";
};
- i2c_8: i2c@138E0000 {
+ i2c_8: i2c@138e0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-hdmiphy-i2c";
@@ -651,7 +651,7 @@
status = "disabled";
};
- pwm: pwm@139D0000 {
+ pwm: pwm@139d0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x139D0000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
@@ -720,7 +720,7 @@
status = "disabled";
};
- tmu: tmu@100C0000 {
+ tmu: tmu@100c0000 {
#include "exynos4412-tmu-sensor-conf.dtsi"
};
@@ -743,7 +743,7 @@
iommus = <&sysmmu_rotator>;
};
- hdmi: hdmi@12D00000 {
+ hdmi: hdmi@12d00000 {
compatible = "samsung,exynos4210-hdmi";
reg = <0x12D00000 0x70000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -758,7 +758,7 @@
status = "disabled";
};
- hdmicec: cec@100B0000 {
+ hdmicec: cec@100b0000 {
compatible = "samsung,s5p-cec";
reg = <0x100B0000 0x200>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
@@ -771,7 +771,7 @@
status = "disabled";
};
- mixer: mixer@12C10000 {
+ mixer: mixer@12c10000 {
compatible = "samsung,exynos4210-mixer";
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
@@ -910,7 +910,7 @@
#iommu-cells = <0>;
};
- sysmmu_tv: sysmmu@12E20000 {
+ sysmmu_tv: sysmmu@12e20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x12E20000 0x1000>;
interrupt-parent = <&combiner>;
@@ -921,7 +921,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimc0: sysmmu@11A20000 {
+ sysmmu_fimc0: sysmmu@11a20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11A20000 0x1000>;
interrupt-parent = <&combiner>;
@@ -932,7 +932,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimc1: sysmmu@11A30000 {
+ sysmmu_fimc1: sysmmu@11a30000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11A30000 0x1000>;
interrupt-parent = <&combiner>;
@@ -943,7 +943,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimc2: sysmmu@11A40000 {
+ sysmmu_fimc2: sysmmu@11a40000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11A40000 0x1000>;
interrupt-parent = <&combiner>;
@@ -954,7 +954,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimc3: sysmmu@11A50000 {
+ sysmmu_fimc3: sysmmu@11a50000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11A50000 0x1000>;
interrupt-parent = <&combiner>;
@@ -965,7 +965,7 @@
#iommu-cells = <0>;
};
- sysmmu_jpeg: sysmmu@11A60000 {
+ sysmmu_jpeg: sysmmu@11a60000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11A60000 0x1000>;
interrupt-parent = <&combiner>;
@@ -976,7 +976,7 @@
#iommu-cells = <0>;
};
- sysmmu_rotator: sysmmu@12A30000 {
+ sysmmu_rotator: sysmmu@12a30000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x12A30000 0x1000>;
interrupt-parent = <&combiner>;
@@ -986,7 +986,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimd0: sysmmu@11E20000 {
+ sysmmu_fimd0: sysmmu@11e20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11E20000 0x1000>;
interrupt-parent = <&combiner>;
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 03dd61f64809..ce161ad1215d 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -82,7 +82,7 @@
};
};
- pd_lcd1: lcd1-power-domain@10023CA0 {
+ pd_lcd1: lcd1-power-domain@10023ca0 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023CA0 0x20>;
#power-domain-cells = <0>;
@@ -156,7 +156,7 @@
reg = <0x03860000 0x1000>;
};
- tmu: tmu@100C0000 {
+ tmu: tmu@100c0000 {
compatible = "samsung,exynos4210-tmu";
interrupt-parent = <&combiner>;
reg = <0x100C0000 0x100>;
@@ -229,7 +229,7 @@
};
};
- mixer: mixer@12C10000 {
+ mixer: mixer@12c10000 {
clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer",
"sclk_mixer";
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
@@ -245,7 +245,7 @@
status = "disabled";
};
- sysmmu_g2d: sysmmu@12A20000 {
+ sysmmu_g2d: sysmmu@12a20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x12A20000 0x1000>;
interrupt-parent = <&combiner>;
diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
index 4eebd4721a5f..ef7b89d3db9e 100644
--- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
@@ -925,7 +925,7 @@
};
};
- pinctrl_3: pinctrl@106E0000 {
+ pinctrl_3: pinctrl@106e0000 {
gpv0: gpv0 {
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index b255ac55b1c1..29990ad56e1f 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -38,7 +38,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu0: cpu@A00 {
+ cpu0: cpu@a00 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA00>;
@@ -50,21 +50,21 @@
#cooling-cells = <2>; /* min followed by max */
};
- cpu@A01 {
+ cpu@a01 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA01>;
operating-points-v2 = <&cpu0_opp_table>;
};
- cpu@A02 {
+ cpu@a02 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA02>;
operating-points-v2 = <&cpu0_opp_table>;
};
- cpu@A03 {
+ cpu@a03 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA03>;
@@ -168,7 +168,7 @@
};
};
- pd_isp: isp-power-domain@10023CA0 {
+ pd_isp: isp-power-domain@10023ca0 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023CA0 0x20>;
#power-domain-cells = <0>;
@@ -224,7 +224,7 @@
samsung,syscon-phandle = <&pmu_system_controller>;
};
- adc: adc@126C0000 {
+ adc: adc@126c0000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x126C0000 0x100>;
interrupt-parent = <&combiner>;
@@ -263,7 +263,7 @@
status = "disabled";
};
- fimc_lite_1: fimc-lite@123A0000 {
+ fimc_lite_1: fimc-lite@123a0000 {
compatible = "samsung,exynos4212-fimc-lite";
reg = <0x123A0000 0x1000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
@@ -370,7 +370,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimc_fd: sysmmu@122A0000 {
+ sysmmu_fimc_fd: sysmmu@122a0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x122A0000 0x1000>;
interrupt-parent = <&combiner>;
@@ -381,7 +381,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimc_mcuctl: sysmmu@122B0000 {
+ sysmmu_fimc_mcuctl: sysmmu@122b0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x122B0000 0x1000>;
interrupt-parent = <&combiner>;
@@ -392,7 +392,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimc_lite0: sysmmu@123B0000 {
+ sysmmu_fimc_lite0: sysmmu@123b0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x123B0000 0x1000>;
interrupt-parent = <&combiner>;
@@ -403,7 +403,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimc_lite1: sysmmu@123C0000 {
+ sysmmu_fimc_lite1: sysmmu@123c0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x123C0000 0x1000>;
interrupt-parent = <&combiner>;
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 66d22521c976..7d7b3133cbcb 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -106,31 +106,31 @@
reg = <0x10050000 0x5000>;
};
- serial_0: serial@12C00000 {
+ serial_0: serial@12c00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
};
- serial_1: serial@12C10000 {
+ serial_1: serial@12c10000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C10000 0x100>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
};
- serial_2: serial@12C20000 {
+ serial_2: serial@12c20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C20000 0x100>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
};
- serial_3: serial@12C30000 {
+ serial_3: serial@12c30000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C30000 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
};
- i2c_0: i2c@12C60000 {
+ i2c_0: i2c@12c60000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C60000 0x100>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
@@ -140,7 +140,7 @@
status = "disabled";
};
- i2c_1: i2c@12C70000 {
+ i2c_1: i2c@12c70000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C70000 0x100>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
@@ -150,7 +150,7 @@
status = "disabled";
};
- i2c_2: i2c@12C80000 {
+ i2c_2: i2c@12c80000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C80000 0x100>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
@@ -160,7 +160,7 @@
status = "disabled";
};
- i2c_3: i2c@12C90000 {
+ i2c_3: i2c@12c90000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C90000 0x100>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
@@ -170,14 +170,14 @@
status = "disabled";
};
- pwm: pwm@12DD0000 {
+ pwm: pwm@12dd0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x12DD0000 0x100>;
samsung,pwm-outputs = <0>, <1>, <2>, <3>;
#pwm-cells = <3>;
};
- rtc: rtc@101E0000 {
+ rtc: rtc@101e0000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x101E0000 0x100>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
@@ -195,7 +195,7 @@
status = "disabled";
};
- dp: dp-controller@145B0000 {
+ dp: dp-controller@145b0000 {
compatible = "samsung,exynos5-dp";
reg = <0x145B0000 0x1000>;
interrupts = <10 3>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 5286084e1032..a596ce260e2a 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -125,7 +125,7 @@
label = "MFC";
};
- pd_disp1: disp1-power-domain@100440A0 {
+ pd_disp1: disp1-power-domain@100440a0 {
compatible = "samsung,exynos4210-pd";
reg = <0x100440A0 0x20>;
#power-domain-cells = <0>;
@@ -165,7 +165,7 @@
clock-frequency = <24000000>;
};
- mct@101C0000 {
+ mct@101c0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>;
interrupt-controller;
@@ -236,7 +236,7 @@
interrupt-parent = <&gic>;
};
- watchdog@101D0000 {
+ watchdog@101d0000 {
compatible = "samsung,exynos5250-wdt";
reg = <0x101D0000 0x100>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
@@ -265,7 +265,7 @@
iommu-names = "left", "right";
};
- rotator: rotator@11C00000 {
+ rotator: rotator@11c00000 {
compatible = "samsung,exynos5250-rotator";
reg = <0x11C00000 0x64>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -283,7 +283,7 @@
#include "exynos4412-tmu-sensor-conf.dtsi"
};
- sata: sata@122F0000 {
+ sata: sata@122f0000 {
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
@@ -306,7 +306,7 @@
};
/* i2c_0-3 are defined in exynos5.dtsi */
- i2c_4: i2c@12CA0000 {
+ i2c_4: i2c@12ca0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CA0000 0x100>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
@@ -319,7 +319,7 @@
status = "disabled";
};
- i2c_5: i2c@12CB0000 {
+ i2c_5: i2c@12cb0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CB0000 0x100>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
@@ -332,7 +332,7 @@
status = "disabled";
};
- i2c_6: i2c@12CC0000 {
+ i2c_6: i2c@12cc0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CC0000 0x100>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
@@ -345,7 +345,7 @@
status = "disabled";
};
- i2c_7: i2c@12CD0000 {
+ i2c_7: i2c@12cd0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CD0000 0x100>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
@@ -358,7 +358,7 @@
status = "disabled";
};
- i2c_8: i2c@12CE0000 {
+ i2c_8: i2c@12ce0000 {
compatible = "samsung,s3c2440-hdmiphy-i2c";
reg = <0x12CE0000 0x1000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
@@ -374,7 +374,7 @@
};
};
- i2c_9: i2c@121D0000 {
+ i2c_9: i2c@121d0000 {
compatible = "samsung,exynos5-sata-phy-i2c";
reg = <0x121D0000 0x100>;
#address-cells = <1>;
@@ -497,7 +497,7 @@
pinctrl-0 = <&i2s0_bus>;
};
- i2s1: i2s@12D60000 {
+ i2s1: i2s@12d60000 {
compatible = "samsung,s3c6410-i2s";
status = "disabled";
reg = <0x12D60000 0x100>;
@@ -510,7 +510,7 @@
pinctrl-0 = <&i2s1_bus>;
};
- i2s2: i2s@12D70000 {
+ i2s2: i2s@12d70000 {
compatible = "samsung,s3c6410-i2s";
status = "disabled";
reg = <0x12D70000 0x100>;
@@ -596,7 +596,7 @@
interrupt-parent = <&gic>;
ranges;
- pdma0: pdma@121A0000 {
+ pdma0: pdma@121a0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
@@ -607,7 +607,7 @@
#dma-requests = <32>;
};
- pdma1: pdma@121B0000 {
+ pdma1: pdma@121b0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
@@ -629,7 +629,7 @@
#dma-requests = <1>;
};
- mdma1: mdma@11C10000 {
+ mdma1: mdma@11c10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
@@ -696,7 +696,7 @@
status = "disabled";
};
- hdmicec: cec@101B0000 {
+ hdmicec: cec@101b0000 {
compatible = "samsung,s5p-cec";
reg = <0x101B0000 0x200>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
@@ -727,7 +727,7 @@
#phy-cells = <0>;
};
- adc: adc@12D10000 {
+ adc: adc@12d10000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
@@ -747,7 +747,7 @@
clock-names = "secss";
};
- sysmmu_g2d: sysmmu@10A60000 {
+ sysmmu_g2d: sysmmu@10a60000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x10A60000 0x1000>;
interrupt-parent = <&combiner>;
@@ -779,7 +779,7 @@
#iommu-cells = <0>;
};
- sysmmu_rotator: sysmmu@11D40000 {
+ sysmmu_rotator: sysmmu@11d40000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11D40000 0x1000>;
interrupt-parent = <&combiner>;
@@ -789,7 +789,7 @@
#iommu-cells = <0>;
};
- sysmmu_jpeg: sysmmu@11F20000 {
+ sysmmu_jpeg: sysmmu@11f20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11F20000 0x1000>;
interrupt-parent = <&combiner>;
@@ -820,7 +820,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimc_fd: sysmmu@132A0000 {
+ sysmmu_fimc_fd: sysmmu@132a0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x132A0000 0x1000>;
interrupt-parent = <&combiner>;
@@ -850,7 +850,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimc_mcuctl: sysmmu@132B0000 {
+ sysmmu_fimc_mcuctl: sysmmu@132b0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x132B0000 0x1000>;
interrupt-parent = <&combiner>;
@@ -860,7 +860,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimc_odc: sysmmu@132C0000 {
+ sysmmu_fimc_odc: sysmmu@132c0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x132C0000 0x1000>;
interrupt-parent = <&combiner>;
@@ -870,7 +870,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimc_dis0: sysmmu@132D0000 {
+ sysmmu_fimc_dis0: sysmmu@132d0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x132D0000 0x1000>;
interrupt-parent = <&combiner>;
@@ -890,7 +890,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimc_3dnr: sysmmu@132F0000 {
+ sysmmu_fimc_3dnr: sysmmu@132f0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x132F0000 0x1000>;
interrupt-parent = <&combiner>;
@@ -900,7 +900,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimc_lite0: sysmmu@13C40000 {
+ sysmmu_fimc_lite0: sysmmu@13c40000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13C40000 0x1000>;
interrupt-parent = <&combiner>;
@@ -911,7 +911,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimc_lite1: sysmmu@13C50000 {
+ sysmmu_fimc_lite1: sysmmu@13c50000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13C50000 0x1000>;
interrupt-parent = <&combiner>;
@@ -922,7 +922,7 @@
#iommu-cells = <0>;
};
- sysmmu_gsc0: sysmmu@13E80000 {
+ sysmmu_gsc0: sysmmu@13e80000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13E80000 0x1000>;
interrupt-parent = <&combiner>;
@@ -933,7 +933,7 @@
#iommu-cells = <0>;
};
- sysmmu_gsc1: sysmmu@13E90000 {
+ sysmmu_gsc1: sysmmu@13e90000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13E90000 0x1000>;
interrupt-parent = <&combiner>;
@@ -944,7 +944,7 @@
#iommu-cells = <0>;
};
- sysmmu_gsc2: sysmmu@13EA0000 {
+ sysmmu_gsc2: sysmmu@13ea0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13EA0000 0x1000>;
interrupt-parent = <&combiner>;
@@ -955,7 +955,7 @@
#iommu-cells = <0>;
};
- sysmmu_gsc3: sysmmu@13EB0000 {
+ sysmmu_gsc3: sysmmu@13eb0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13EB0000 0x1000>;
interrupt-parent = <&combiner>;
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index 5e88c9645975..12c6b011576b 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -106,13 +106,13 @@
#clock-cells = <1>;
};
- clock_g2d: clock-controller@10A00000 {
+ clock_g2d: clock-controller@10a00000 {
compatible = "samsung,exynos5260-clock-g2d";
reg = <0x10A00000 0x10000>;
#clock-cells = <1>;
};
- clock_mif: clock-controller@10CE0000 {
+ clock_mif: clock-controller@10ce0000 {
compatible = "samsung,exynos5260-clock-mif";
reg = <0x10CE0000 0x10000>;
#clock-cells = <1>;
@@ -130,25 +130,25 @@
#clock-cells = <1>;
};
- clock_fsys: clock-controller@122E0000 {
+ clock_fsys: clock-controller@122e0000 {
compatible = "samsung,exynos5260-clock-fsys";
reg = <0x122E0000 0x10000>;
#clock-cells = <1>;
};
- clock_aud: clock-controller@128C0000 {
+ clock_aud: clock-controller@128c0000 {
compatible = "samsung,exynos5260-clock-aud";
reg = <0x128C0000 0x10000>;
#clock-cells = <1>;
};
- clock_isp: clock-controller@133C0000 {
+ clock_isp: clock-controller@133c0000 {
compatible = "samsung,exynos5260-clock-isp";
reg = <0x133C0000 0x10000>;
#clock-cells = <1>;
};
- clock_gscl: clock-controller@13F00000 {
+ clock_gscl: clock-controller@13f00000 {
compatible = "samsung,exynos5260-clock-gscl";
reg = <0x13F00000 0x10000>;
#clock-cells = <1>;
@@ -179,7 +179,7 @@
reg = <0x10000000 0x100>;
};
- mct: mct@100B0000 {
+ mct: mct@100b0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x100B0000 0x1000>;
clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
@@ -198,7 +198,7 @@
<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
};
- cci: cci@10F00000 {
+ cci: cci@10f00000 {
compatible = "arm,cci-400";
#address-cells = <1>;
#size-cells = <1>;
@@ -236,18 +236,18 @@
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
};
- pinctrl_2: pinctrl@128B0000 {
+ pinctrl_2: pinctrl@128b0000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x128B0000 0x1000>;
interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
};
- pmu_system_controller: system-controller@10D50000 {
+ pmu_system_controller: system-controller@10d50000 {
compatible = "samsung,exynos5260-pmu", "syscon";
reg = <0x10D50000 0x10000>;
};
- uart0: serial@12C00000 {
+ uart0: serial@12c00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
@@ -256,7 +256,7 @@
status = "disabled";
};
- uart1: serial@12C10000 {
+ uart1: serial@12c10000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C10000 0x100>;
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
@@ -265,7 +265,7 @@
status = "disabled";
};
- uart2: serial@12C20000 {
+ uart2: serial@12c20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C20000 0x100>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 8aa2cc7aa125..fd3bdb7297ac 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -237,37 +237,37 @@
status = "disabled";
};
- nocp_mem0_0: nocp@10CA1000 {
+ nocp_mem0_0: nocp@10ca1000 {
compatible = "samsung,exynos5420-nocp";
reg = <0x10CA1000 0x200>;
status = "disabled";
};
- nocp_mem0_1: nocp@10CA1400 {
+ nocp_mem0_1: nocp@10ca1400 {
compatible = "samsung,exynos5420-nocp";
reg = <0x10CA1400 0x200>;
status = "disabled";
};
- nocp_mem1_0: nocp@10CA1800 {
+ nocp_mem1_0: nocp@10ca1800 {
compatible = "samsung,exynos5420-nocp";
reg = <0x10CA1800 0x200>;
status = "disabled";
};
- nocp_mem1_1: nocp@10CA1C00 {
+ nocp_mem1_1: nocp@10ca1c00 {
compatible = "samsung,exynos5420-nocp";
reg = <0x10CA1C00 0x200>;
status = "disabled";
};
- nocp_g3d_0: nocp@11A51000 {
+ nocp_g3d_0: nocp@11a51000 {
compatible = "samsung,exynos5420-nocp";
reg = <0x11A51000 0x200>;
status = "disabled";
};
- nocp_g3d_1: nocp@11A51400 {
+ nocp_g3d_1: nocp@11a51400 {
compatible = "samsung,exynos5420-nocp";
reg = <0x11A51400 0x200>;
status = "disabled";
@@ -309,7 +309,7 @@
label = "MSC";
};
- disp_pd: power-domain@100440C0 {
+ disp_pd: power-domain@100440c0 {
compatible = "samsung,exynos4210-pd";
reg = <0x100440C0 0x20>;
#power-domain-cells = <0>;
@@ -376,7 +376,7 @@
#dma-requests = <16>;
};
- pdma0: pdma@121A0000 {
+ pdma0: pdma@121a0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
@@ -387,7 +387,7 @@
#dma-requests = <32>;
};
- pdma1: pdma@121B0000 {
+ pdma1: pdma@121b0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
@@ -409,7 +409,7 @@
#dma-requests = <1>;
};
- mdma1: mdma@11C10000 {
+ mdma1: mdma@11c10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
@@ -449,7 +449,7 @@
status = "disabled";
};
- i2s1: i2s@12D60000 {
+ i2s1: i2s@12d60000 {
compatible = "samsung,exynos5420-i2s";
reg = <0x12D60000 0x100>;
dmas = <&pdma1 12
@@ -465,7 +465,7 @@
status = "disabled";
};
- i2s2: i2s@12D70000 {
+ i2s2: i2s@12d70000 {
compatible = "samsung,exynos5420-i2s";
reg = <0x12D70000 0x100>;
dmas = <&pdma0 12
@@ -554,7 +554,7 @@
status = "disabled";
};
- adc: adc@12D10000 {
+ adc: adc@12d10000 {
compatible = "samsung,exynos-adc-v2";
reg = <0x12D10000 0x100>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
@@ -566,7 +566,7 @@
status = "disabled";
};
- hsi2c_8: i2c@12E00000 {
+ hsi2c_8: i2c@12e00000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12E00000 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
@@ -579,7 +579,7 @@
status = "disabled";
};
- hsi2c_9: i2c@12E10000 {
+ hsi2c_9: i2c@12e10000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12E10000 0x1000>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
@@ -592,7 +592,7 @@
status = "disabled";
};
- hsi2c_10: i2c@12E20000 {
+ hsi2c_10: i2c@12e20000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12E20000 0x1000>;
interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
@@ -620,11 +620,11 @@
power-domains = <&disp_pd>;
};
- hdmiphy: hdmiphy@145D0000 {
+ hdmiphy: hdmiphy@145d0000 {
reg = <0x145D0000 0x20>;
};
- hdmicec: cec@101B0000 {
+ hdmicec: cec@101b0000 {
compatible = "samsung,s5p-cec";
reg = <0x101B0000 0x200>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
@@ -649,7 +649,7 @@
status = "disabled";
};
- rotator: rotator@11C00000 {
+ rotator: rotator@11c00000 {
compatible = "samsung,exynos5250-rotator";
reg = <0x11C00000 0x64>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -678,7 +678,7 @@
iommus = <&sysmmu_gscl1>;
};
- jpeg_0: jpeg@11F50000 {
+ jpeg_0: jpeg@11f50000 {
compatible = "samsung,exynos5420-jpeg";
reg = <0x11F50000 0x1000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
@@ -687,7 +687,7 @@
iommus = <&sysmmu_jpeg0>;
};
- jpeg_1: jpeg@11F60000 {
+ jpeg_1: jpeg@11f60000 {
compatible = "samsung,exynos5420-jpeg";
reg = <0x11F60000 0x1000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
@@ -752,7 +752,7 @@
#include "exynos5420-tmu-sensor-conf.dtsi"
};
- sysmmu_g2dr: sysmmu@0x10A60000 {
+ sysmmu_g2dr: sysmmu@10a60000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x10A60000 0x1000>;
interrupt-parent = <&combiner>;
@@ -762,7 +762,7 @@
#iommu-cells = <0>;
};
- sysmmu_g2dw: sysmmu@0x10A70000 {
+ sysmmu_g2dw: sysmmu@10a70000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x10A70000 0x1000>;
interrupt-parent = <&combiner>;
@@ -772,7 +772,7 @@
#iommu-cells = <0>;
};
- sysmmu_tv: sysmmu@0x14650000 {
+ sysmmu_tv: sysmmu@14650000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x14650000 0x1000>;
interrupt-parent = <&combiner>;
@@ -783,7 +783,7 @@
#iommu-cells = <0>;
};
- sysmmu_gscl0: sysmmu@0x13E80000 {
+ sysmmu_gscl0: sysmmu@13e80000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13E80000 0x1000>;
interrupt-parent = <&combiner>;
@@ -794,7 +794,7 @@
#iommu-cells = <0>;
};
- sysmmu_gscl1: sysmmu@0x13E90000 {
+ sysmmu_gscl1: sysmmu@13e90000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13E90000 0x1000>;
interrupt-parent = <&combiner>;
@@ -805,7 +805,7 @@
#iommu-cells = <0>;
};
- sysmmu_scaler0r: sysmmu@0x12880000 {
+ sysmmu_scaler0r: sysmmu@12880000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x12880000 0x1000>;
interrupt-parent = <&combiner>;
@@ -815,7 +815,7 @@
#iommu-cells = <0>;
};
- sysmmu_scaler1r: sysmmu@0x12890000 {
+ sysmmu_scaler1r: sysmmu@12890000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x12890000 0x1000>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
@@ -824,7 +824,7 @@
#iommu-cells = <0>;
};
- sysmmu_scaler2r: sysmmu@0x128A0000 {
+ sysmmu_scaler2r: sysmmu@128a0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x128A0000 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
@@ -833,7 +833,7 @@
#iommu-cells = <0>;
};
- sysmmu_scaler0w: sysmmu@0x128C0000 {
+ sysmmu_scaler0w: sysmmu@128c0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x128C0000 0x1000>;
interrupt-parent = <&combiner>;
@@ -843,7 +843,7 @@
#iommu-cells = <0>;
};
- sysmmu_scaler1w: sysmmu@0x128D0000 {
+ sysmmu_scaler1w: sysmmu@128d0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x128D0000 0x1000>;
interrupt-parent = <&combiner>;
@@ -853,7 +853,7 @@
#iommu-cells = <0>;
};
- sysmmu_scaler2w: sysmmu@0x128E0000 {
+ sysmmu_scaler2w: sysmmu@128e0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x128E0000 0x1000>;
interrupt-parent = <&combiner>;
@@ -863,7 +863,7 @@
#iommu-cells = <0>;
};
- sysmmu_rotator: sysmmu@0x11D40000 {
+ sysmmu_rotator: sysmmu@11d40000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11D40000 0x1000>;
interrupt-parent = <&combiner>;
@@ -873,7 +873,7 @@
#iommu-cells = <0>;
};
- sysmmu_jpeg0: sysmmu@0x11F10000 {
+ sysmmu_jpeg0: sysmmu@11f10000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11F10000 0x1000>;
interrupt-parent = <&combiner>;
@@ -883,7 +883,7 @@
#iommu-cells = <0>;
};
- sysmmu_jpeg1: sysmmu@0x11F20000 {
+ sysmmu_jpeg1: sysmmu@11f20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11F20000 0x1000>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
@@ -892,7 +892,7 @@
#iommu-cells = <0>;
};
- sysmmu_mfc_l: sysmmu@0x11200000 {
+ sysmmu_mfc_l: sysmmu@11200000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11200000 0x1000>;
interrupt-parent = <&combiner>;
@@ -903,7 +903,7 @@
#iommu-cells = <0>;
};
- sysmmu_mfc_r: sysmmu@0x11210000 {
+ sysmmu_mfc_r: sysmmu@11210000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11210000 0x1000>;
interrupt-parent = <&combiner>;
@@ -914,7 +914,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimd1_0: sysmmu@0x14640000 {
+ sysmmu_fimd1_0: sysmmu@14640000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x14640000 0x1000>;
interrupt-parent = <&combiner>;
@@ -925,7 +925,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimd1_1: sysmmu@0x14680000 {
+ sysmmu_fimd1_1: sysmmu@14680000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x14680000 0x1000>;
interrupt-parent = <&combiner>;
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index a5b8d0f0877e..353428fe10c4 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -26,7 +26,7 @@
stdout-path = "serial2:115200n8";
};
- firmware@02073000 {
+ firmware@2073000 {
compatible = "samsung,secure-firmware";
reg = <0x02073000 0x1000>;
};
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 9c3c75ae5e48..3acf3f2d643e 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -35,7 +35,7 @@
#clock-cells = <1>;
};
- gic: interrupt-controller@2E0000 {
+ gic: interrupt-controller@2e0000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
interrupt-controller;
@@ -108,7 +108,7 @@
>;
};
- serial_0: serial@B0000 {
+ serial_0: serial@b0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xB0000 0x1000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -116,7 +116,7 @@
clock-names = "uart", "clk_uart_baud0";
};
- serial_1: serial@C0000 {
+ serial_1: serial@c0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xC0000 0x1000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
@@ -124,7 +124,7 @@
clock-names = "uart", "clk_uart_baud0";
};
- spi_0: spi@D0000 {
+ spi_0: spi@d0000 {
compatible = "samsung,exynos5440-spi";
reg = <0xD0000 0x100>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
@@ -136,7 +136,7 @@
clock-names = "spi", "spi_busclk0";
};
- pin_ctrl: pinctrl@E0000 {
+ pin_ctrl: pinctrl@e0000 {
compatible = "samsung,exynos5440-pinctrl";
reg = <0xE0000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
@@ -168,7 +168,7 @@
};
};
- i2c@F0000 {
+ i2c@f0000 {
compatible = "samsung,exynos5440-i2c";
reg = <0xF0000 0x1000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
@@ -233,7 +233,7 @@
#include "exynos5440-tmu-sensor-conf.dtsi"
};
- tmuctrl_1: tmuctrl@16011C {
+ tmuctrl_1: tmuctrl@16011c {
compatible = "samsung,exynos5440-tmu";
reg = <0x16011C 0x230>, <0x160368 0x10>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index 80f007550324..568524325f1a 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -33,7 +33,7 @@
compatible = "samsung,s3c2416-irq";
};
- clocks: clock-controller@0x4c000000 {
+ clocks: clock-controller@4c000000 {
compatible = "samsung,s3c2416-clock";
reg = <0x4c000000 0x40>;
#clock-cells = <1>;
@@ -72,7 +72,7 @@
<&clocks SCLK_UART>;
};
- uart_3: serial@5000C000 {
+ uart_3: serial@5000c000 {
compatible = "samsung,s3c2440-uart";
reg = <0x5000C000 0x4000>;
interrupts = <1 18 24 4>, <1 18 25 4>;
@@ -83,7 +83,7 @@
status = "disabled";
};
- sdhci_1: sdhci@4AC00000 {
+ sdhci_1: sdhci@4ac00000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0x4AC00000 0x100>;
interrupts = <0 0 21 3>;
@@ -94,7 +94,7 @@
status = "disabled";
};
- sdhci_0: sdhci@4A800000 {
+ sdhci_0: sdhci@4a800000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0x4A800000 0x100>;
interrupts = <0 0 20 3>;
--
2.11.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox