* [PATCH v4 09/17] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
From: Yong Wu @ 2020-05-30 8:10 UTC (permalink / raw)
To: Matthias Brugger, Joerg Roedel, Rob Herring
Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
linux-mediatek, srv_heupstream, devicetree, linux-kernel,
linux-arm-kernel, iommu, yong.wu, youlin.pei, Nicolas Boichat,
Matthias Kaehlcke, anan.sun, cui.zhang, chao.hao, ming-fan.chen,
eizan, acourbot, Tiffany Lin
In-Reply-To: <1590826218-23653-1-git-send-email-yong.wu@mediatek.com>
MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the vcodec device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.
CC: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
.../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 19 ---------------
drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 3 ---
drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 1 -
.../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 27 ----------------------
4 files changed, 50 deletions(-)
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
index 36dfe3f..1d7d14d 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
@@ -8,14 +8,12 @@
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/pm_runtime.h>
-#include <soc/mediatek/smi.h>
#include "mtk_vcodec_dec_pm.h"
#include "mtk_vcodec_util.h"
int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
{
- struct device_node *node;
struct platform_device *pdev;
struct mtk_vcodec_pm *pm;
struct mtk_vcodec_clk *dec_clk;
@@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
pm = &mtkdev->pm;
pm->mtkdev = mtkdev;
dec_clk = &pm->vdec_clk;
- node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
- if (!node) {
- mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
- return -1;
- }
- pdev = of_find_device_by_node(node);
- of_node_put(node);
- if (WARN_ON(!pdev)) {
- return -1;
- }
- pm->larbvdec = &pdev->dev;
pdev = mtkdev->plat_dev;
pm->dev = &pdev->dev;
@@ -113,11 +100,6 @@ void mtk_vcodec_dec_clock_on(struct mtk_vcodec_pm *pm)
}
}
- ret = mtk_smi_larb_get(pm->larbvdec);
- if (ret) {
- mtk_v4l2_err("mtk_smi_larb_get larbvdec fail %d", ret);
- goto error;
- }
return;
error:
@@ -130,7 +112,6 @@ void mtk_vcodec_dec_clock_off(struct mtk_vcodec_pm *pm)
struct mtk_vcodec_clk *dec_clk = &pm->vdec_clk;
int i = 0;
- mtk_smi_larb_put(pm->larbvdec);
for (i = dec_clk->clk_num - 1; i >= 0; i--)
clk_disable_unprepare(dec_clk->clk_info[i].vcodec_clk);
}
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
index 52d1ce1..7d3966a 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
@@ -190,10 +190,7 @@ struct mtk_vcodec_clk {
*/
struct mtk_vcodec_pm {
struct mtk_vcodec_clk vdec_clk;
- struct device *larbvdec;
-
struct mtk_vcodec_clk venc_clk;
- struct device *larbvenc;
struct device *dev;
struct mtk_vcodec_dev *mtkdev;
};
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
index 5301dca..18025f7 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
@@ -8,7 +8,6 @@
#include <media/v4l2-event.h>
#include <media/v4l2-mem2mem.h>
#include <media/videobuf2-dma-contig.h>
-#include <soc/mediatek/smi.h>
#include <linux/pm_runtime.h>
#include "mtk_vcodec_drv.h"
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
index 01c6a55..047919e 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
@@ -8,44 +8,25 @@
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/pm_runtime.h>
-#include <soc/mediatek/smi.h>
#include "mtk_vcodec_enc_pm.h"
#include "mtk_vcodec_util.h"
int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
{
- struct device_node *node;
struct platform_device *pdev;
struct mtk_vcodec_pm *pm;
struct mtk_vcodec_clk *enc_clk;
struct mtk_vcodec_clk_info *clk_info;
int ret = 0, i = 0;
- struct device *dev;
pdev = mtkdev->plat_dev;
pm = &mtkdev->pm;
memset(pm, 0, sizeof(struct mtk_vcodec_pm));
pm->mtkdev = mtkdev;
pm->dev = &pdev->dev;
- dev = &pdev->dev;
enc_clk = &pm->venc_clk;
- node = of_parse_phandle(dev->of_node, "mediatek,larb", 0);
- if (!node) {
- mtk_v4l2_err("no mediatek,larb found");
- return -ENODEV;
- }
- pdev = of_find_device_by_node(node);
- of_node_put(node);
- if (!pdev) {
- mtk_v4l2_err("no mediatek,larb device found");
- return -ENODEV;
- }
- pm->larbvenc = &pdev->dev;
- pdev = mtkdev->plat_dev;
- pm->dev = &pdev->dev;
-
enc_clk->clk_num = of_property_count_strings(pdev->dev.of_node,
"clock-names");
if (enc_clk->clk_num > 0) {
@@ -93,13 +74,6 @@ void mtk_vcodec_enc_clock_on(struct mtk_vcodec_pm *pm)
}
}
- ret = mtk_smi_larb_get(pm->larbvenc);
- if (ret) {
- mtk_v4l2_err("mtk_smi_larb_get larb3 fail %d", ret);
- goto clkerr;
- }
- return;
-
clkerr:
for (i -= 1; i >= 0; i--)
clk_disable_unprepare(enc_clk->clk_info[i].vcodec_clk);
@@ -110,7 +84,6 @@ void mtk_vcodec_enc_clock_off(struct mtk_vcodec_pm *pm)
struct mtk_vcodec_clk *enc_clk = &pm->venc_clk;
int i = 0;
- mtk_smi_larb_put(pm->larbvenc);
for (i = enc_clk->clk_num - 1; i >= 0; i--)
clk_disable_unprepare(enc_clk->clk_info[i].vcodec_clk);
}
--
1.9.1
^ permalink raw reply related
* [PATCH v4 08/17] media: mtk-vcodec: separate mtk-vcodec-enc node.
From: Yong Wu @ 2020-05-30 8:10 UTC (permalink / raw)
To: Matthias Brugger, Joerg Roedel, Rob Herring
Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
linux-mediatek, srv_heupstream, devicetree, linux-kernel,
linux-arm-kernel, iommu, yong.wu, youlin.pei, Nicolas Boichat,
Matthias Kaehlcke, anan.sun, cui.zhang, chao.hao, ming-fan.chen,
eizan, acourbot, Maoguang Meng, Hsin-Yi Wang, Irui Wang
In-Reply-To: <1590826218-23653-1-git-send-email-yong.wu@mediatek.com>
From: Maoguang Meng <maoguang.meng@mediatek.com>
MTK H264 Encoder(VENC_SYS) and VP8 Encoder(VENC_LT_SYS) are two
independent hardware instance. They have their owner interrupt,
register mapping, and special clocks.
This patch seperates the two instance. This is a preparing patch for
adding device_link between the larbs and venc-device. It's mainly for
fixing the problem:
https://lkml.org/lkml/2019/9/3/316
User Call "VIDIOC_QUERYCAP":
H264 Encoder return driver name "mtk-vcodec-enc";
VP8 Encoder return driver name "mtk-venc-vp8.
Signed-off-by: Maoguang Meng <maoguang.meng@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
---
drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 10 +-
drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 23 +++-
.../media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 127 +++++++++------------
.../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 31 +----
.../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.h | 1 -
.../media/platform/mtk-vcodec/venc/venc_vp8_if.c | 4 +-
6 files changed, 80 insertions(+), 116 deletions(-)
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
index a2716117..52d1ce1 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
@@ -19,6 +19,7 @@
#define MTK_VCODEC_DRV_NAME "mtk_vcodec_drv"
#define MTK_VCODEC_DEC_NAME "mtk-vcodec-dec"
#define MTK_VCODEC_ENC_NAME "mtk-vcodec-enc"
+#define MTK_VENC_VP8_NAME "mtk-venc-vp8"
#define MTK_PLATFORM_STR "platform:mt8173"
#define MTK_VCODEC_MAX_PLANES 3
@@ -193,7 +194,6 @@ struct mtk_vcodec_pm {
struct mtk_vcodec_clk venc_clk;
struct device *larbvenc;
- struct device *larbvenclt;
struct device *dev;
struct mtk_vcodec_dev *mtkdev;
};
@@ -311,25 +311,27 @@ enum mtk_chip {
* @chip: chip this encoder is compatible with
*
* @uses_ext: whether the encoder uses the extended firmware messaging format
- * @has_lt_irq: whether the encoder uses the LT irq
+ * @name: whether the encoder core is vp8
* @min_birate: minimum supported encoding bitrate
* @max_bitrate: maximum supported encoding bitrate
* @capture_formats: array of supported capture formats
* @num_capture_formats: number of entries in capture_formats
* @output_formats: array of supported output formats
* @num_output_formats: number of entries in output_formats
+ * @core_id: stand for h264 or vp8 encode index
*/
struct mtk_vcodec_enc_pdata {
enum mtk_chip chip;
bool uses_ext;
- bool has_lt_irq;
+ const char *name;
unsigned long min_bitrate;
unsigned long max_bitrate;
const struct mtk_video_fmt *capture_formats;
size_t num_capture_formats;
const struct mtk_video_fmt *output_formats;
size_t num_output_formats;
+ int core_id;
};
/**
@@ -359,7 +361,6 @@ struct mtk_vcodec_enc_pdata {
*
* @dec_irq: decoder irq resource
* @enc_irq: h264 encoder irq resource
- * @enc_lt_irq: vp8 encoder irq resource
*
* @dec_mutex: decoder hardware lock
* @enc_mutex: encoder hardware lock.
@@ -395,7 +396,6 @@ struct mtk_vcodec_dev {
int dec_irq;
int enc_irq;
- int enc_lt_irq;
struct mutex dec_mutex;
struct mutex enc_mutex;
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
index f0af78f..5301dca 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
@@ -9,6 +9,7 @@
#include <media/v4l2-mem2mem.h>
#include <media/videobuf2-dma-contig.h>
#include <soc/mediatek/smi.h>
+#include <linux/pm_runtime.h>
#include "mtk_vcodec_drv.h"
#include "mtk_vcodec_enc.h"
@@ -174,7 +175,10 @@ static int vidioc_enum_fmt_vid_out(struct file *file, void *priv,
static int vidioc_venc_querycap(struct file *file, void *priv,
struct v4l2_capability *cap)
{
- strscpy(cap->driver, MTK_VCODEC_ENC_NAME, sizeof(cap->driver));
+ const struct mtk_vcodec_enc_pdata *pdata =
+ fh_to_ctx(priv)->dev->venc_pdata;
+
+ strscpy(cap->driver, pdata->name, sizeof(cap->driver));
strscpy(cap->bus_info, MTK_PLATFORM_STR, sizeof(cap->bus_info));
strscpy(cap->card, MTK_PLATFORM_STR, sizeof(cap->card));
@@ -788,7 +792,7 @@ static int vb2ops_venc_start_streaming(struct vb2_queue *q, unsigned int count)
*/
if ((ctx->state == MTK_STATE_ABORT) || (ctx->state == MTK_STATE_FREE)) {
ret = -EIO;
- goto err_set_param;
+ goto err_start_stream;
}
/* Do the initialization when both start_streaming have been called */
@@ -800,6 +804,12 @@ static int vb2ops_venc_start_streaming(struct vb2_queue *q, unsigned int count)
return 0;
}
+ ret = pm_runtime_get_sync(&ctx->dev->plat_dev->dev);
+ if (ret < 0) {
+ mtk_v4l2_err("pm_runtime_get_sync fail %d", ret);
+ goto err_start_stream;
+ }
+
mtk_venc_set_param(ctx, ¶m);
ret = venc_if_set_param(ctx, VENC_SET_PARAM_ENC, ¶m);
if (ret) {
@@ -826,6 +836,11 @@ static int vb2ops_venc_start_streaming(struct vb2_queue *q, unsigned int count)
return 0;
err_set_param:
+ ret = pm_runtime_put(&ctx->dev->plat_dev->dev);
+ if (ret < 0)
+ mtk_v4l2_err("pm_runtime_put fail %d", ret);
+
+err_start_stream:
for (i = 0; i < q->num_buffers; ++i) {
struct vb2_buffer *buf = vb2_get_buffer(q, i);
@@ -879,6 +894,10 @@ static void vb2ops_venc_stop_streaming(struct vb2_queue *q)
if (ret)
mtk_v4l2_err("venc_if_deinit failed=%d", ret);
+ ret = pm_runtime_put(&ctx->dev->plat_dev->dev);
+ if (ret < 0)
+ mtk_v4l2_err("pm_runtime_put fail %d", ret);
+
ctx->state = MTK_STATE_FREE;
}
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
index b8fe408..fe17f0c 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
@@ -49,12 +49,15 @@
},
};
-static const struct mtk_video_fmt mtk_video_formats_capture_mt8173[] = {
+static const struct mtk_video_fmt mtk_video_formats_capture_mt8173_h264[] = {
{
.fourcc = V4L2_PIX_FMT_H264,
.type = MTK_FMT_ENC,
.num_planes = 1,
},
+};
+
+static const struct mtk_video_fmt mtk_video_formats_capture_mt8173_vp8[] = {
{
.fourcc = V4L2_PIX_FMT_VP8,
.type = MTK_FMT_ENC,
@@ -110,35 +113,13 @@ static irqreturn_t mtk_vcodec_enc_irq_handler(int irq, void *priv)
ctx = dev->curr_ctx;
spin_unlock_irqrestore(&dev->irqlock, flags);
- mtk_v4l2_debug(1, "id=%d", ctx->id);
- addr = dev->reg_base[VENC_SYS] + MTK_VENC_IRQ_ACK_OFFSET;
-
- ctx->irq_status = readl(dev->reg_base[VENC_SYS] +
- (MTK_VENC_IRQ_STATUS_OFFSET));
-
- clean_irq_status(ctx->irq_status, addr);
-
- wake_up_ctx(ctx, MTK_INST_IRQ_RECEIVED);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t mtk_vcodec_enc_lt_irq_handler(int irq, void *priv)
-{
- struct mtk_vcodec_dev *dev = priv;
- struct mtk_vcodec_ctx *ctx;
- unsigned long flags;
- void __iomem *addr;
-
- spin_lock_irqsave(&dev->irqlock, flags);
- ctx = dev->curr_ctx;
- spin_unlock_irqrestore(&dev->irqlock, flags);
+ mtk_v4l2_debug(1, "id=%d coreid:%d", ctx->id, dev->venc_pdata->core_id);
+ addr = dev->reg_base[dev->venc_pdata->core_id] +
+ MTK_VENC_IRQ_ACK_OFFSET;
- mtk_v4l2_debug(1, "id=%d", ctx->id);
- ctx->irq_status = readl(dev->reg_base[VENC_LT_SYS] +
+ ctx->irq_status = readl(dev->reg_base[dev->venc_pdata->core_id] +
(MTK_VENC_IRQ_STATUS_OFFSET));
- addr = dev->reg_base[VENC_LT_SYS] + MTK_VENC_IRQ_ACK_OFFSET;
-
clean_irq_status(ctx->irq_status, addr);
wake_up_ctx(ctx, MTK_INST_IRQ_RECEIVED);
@@ -265,7 +246,8 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
struct resource *res;
phandle rproc_phandle;
enum mtk_vcodec_fw_type fw_type;
- int i, j, ret;
+ int ret;
+ void __iomem *reg_base;
dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
if (!dev)
@@ -291,63 +273,39 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
dev->venc_pdata = of_device_get_match_data(&pdev->dev);
ret = mtk_vcodec_init_enc_pm(dev);
if (ret < 0) {
- dev_err(&pdev->dev, "Failed to get mt vcodec clock source!");
+ dev_err(&pdev->dev, "Failed to get mtk vcodec clock source!");
goto err_enc_pm;
}
- for (i = VENC_SYS, j = 0; i < NUM_MAX_VCODEC_REG_BASE; i++, j++) {
- res = platform_get_resource(pdev, IORESOURCE_MEM, j);
- dev->reg_base[i] = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR((__force void *)dev->reg_base[i])) {
- ret = PTR_ERR((__force void *)dev->reg_base[i]);
- goto err_res;
- }
- mtk_v4l2_debug(2, "reg[%d] base=0x%p", i, dev->reg_base[i]);
- }
+ pm_runtime_enable(&pdev->dev);
+
+ snprintf(dev->v4l2_dev.name, sizeof(dev->v4l2_dev.name), "%s",
+ dev->venc_pdata->name);
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (res == NULL) {
- dev_err(&pdev->dev, "failed to get irq resource");
- ret = -ENOENT;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR((__force void *)reg_base)) {
+ ret = PTR_ERR((__force void *)reg_base);
goto err_res;
}
+ dev->reg_base[dev->venc_pdata->core_id] = reg_base;
dev->enc_irq = platform_get_irq(pdev, 0);
ret = devm_request_irq(&pdev->dev, dev->enc_irq,
mtk_vcodec_enc_irq_handler,
0, pdev->name, dev);
if (ret) {
- dev_err(&pdev->dev, "Failed to install dev->enc_irq %d (%d)",
- dev->enc_irq,
- ret);
+ dev_err(&pdev->dev,
+ "Failed to install dev->enc_irq %d (%d) core_id:%d",
+ dev->enc_irq, ret, dev->venc_pdata->core_id);
ret = -EINVAL;
goto err_res;
}
disable_irq(dev->enc_irq);
- if (dev->venc_pdata->has_lt_irq) {
- dev->enc_lt_irq = platform_get_irq(pdev, 1);
- ret = devm_request_irq(&pdev->dev,
- dev->enc_lt_irq,
- mtk_vcodec_enc_lt_irq_handler,
- 0, pdev->name, dev);
- if (ret) {
- dev_err(&pdev->dev,
- "Failed to install dev->enc_lt_irq %d (%d)",
- dev->enc_lt_irq, ret);
- ret = -EINVAL;
- goto err_res;
- }
- disable_irq(dev->enc_lt_irq); /* VENC_LT */
- }
-
mutex_init(&dev->enc_mutex);
mutex_init(&dev->dev_mutex);
spin_lock_init(&dev->irqlock);
-
- snprintf(dev->v4l2_dev.name, sizeof(dev->v4l2_dev.name), "%s",
- "[MTK_V4L2_VENC]");
-
ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
if (ret) {
mtk_v4l2_err("v4l2_device_register err=%d", ret);
@@ -373,7 +331,7 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
V4L2_CAP_STREAMING;
snprintf(vfd_enc->name, sizeof(vfd_enc->name), "%s",
- MTK_VCODEC_ENC_NAME);
+ dev->venc_pdata->name);
video_set_drvdata(vfd_enc, dev);
dev->vfd_enc = vfd_enc;
platform_set_drvdata(pdev, dev);
@@ -401,8 +359,8 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
goto err_enc_reg;
}
- mtk_v4l2_debug(0, "encoder registered as /dev/video%d",
- vfd_enc->num);
+ mtk_v4l2_debug(0, "encoder %d registered as /dev/video%d",
+ dev->venc_pdata->core_id, vfd_enc->num);
return 0;
@@ -415,26 +373,39 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
err_enc_alloc:
v4l2_device_unregister(&dev->v4l2_dev);
err_res:
- mtk_vcodec_release_enc_pm(dev);
+ pm_runtime_disable(&pdev->dev);
err_enc_pm:
mtk_vcodec_fw_release(dev->fw_handler);
return ret;
}
-static const struct mtk_vcodec_enc_pdata mt8173_pdata = {
+static const struct mtk_vcodec_enc_pdata mt8173_avc_pdata = {
+ .chip = MTK_MT8173,
+ .name = MTK_VCODEC_ENC_NAME,
+ .capture_formats = mtk_video_formats_capture_mt8173_h264,
+ .num_capture_formats = 1,
+ .output_formats = mtk_video_formats_output_mt8173,
+ .num_output_formats = ARRAY_SIZE(mtk_video_formats_output_mt8173),
+ .min_bitrate = 1,
+ .max_bitrate = 4000000,
+ .core_id = VENC_SYS,
+};
+
+static const struct mtk_vcodec_enc_pdata mt8173_vp8_pdata = {
.chip = MTK_MT8173,
- .has_lt_irq = true,
- .capture_formats = mtk_video_formats_capture_mt8173,
- .num_capture_formats = ARRAY_SIZE(mtk_video_formats_capture_mt8173),
+ .name = MTK_VENC_VP8_NAME,
+ .capture_formats = mtk_video_formats_capture_mt8173_vp8,
+ .num_capture_formats = 1,
.output_formats = mtk_video_formats_output_mt8173,
.num_output_formats = ARRAY_SIZE(mtk_video_formats_output_mt8173),
.min_bitrate = 1,
.max_bitrate = 4000000,
+ .core_id = VENC_LT_SYS,
};
static const struct mtk_vcodec_enc_pdata mt8183_pdata = {
.chip = MTK_MT8183,
- .has_lt_irq = false,
+ .name = MTK_VCODEC_ENC_NAME,
.uses_ext = true,
.capture_formats = mtk_video_formats_capture_mt8183,
.num_capture_formats = ARRAY_SIZE(mtk_video_formats_capture_mt8183),
@@ -443,10 +414,14 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
.num_output_formats = ARRAY_SIZE(mtk_video_formats_output_mt8173),
.min_bitrate = 64,
.max_bitrate = 40000000,
+ .core_id = VENC_SYS,
};
static const struct of_device_id mtk_vcodec_enc_match[] = {
- {.compatible = "mediatek,mt8173-vcodec-enc", .data = &mt8173_pdata},
+ {.compatible = "mediatek,mt8173-vcodec-avc-enc",
+ .data = &mt8173_avc_pdata},
+ {.compatible = "mediatek,mt8173-vcodec-vp8-enc",
+ .data = &mt8173_vp8_pdata},
{.compatible = "mediatek,mt8183-vcodec-enc", .data = &mt8183_pdata},
{},
};
@@ -466,7 +441,7 @@ static int mtk_vcodec_enc_remove(struct platform_device *pdev)
video_unregister_device(dev->vfd_enc);
v4l2_device_unregister(&dev->v4l2_dev);
- mtk_vcodec_release_enc_pm(dev);
+ pm_runtime_disable(&pdev->dev);
mtk_vcodec_fw_release(dev->fw_handler);
return 0;
}
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
index ee22902..01c6a55 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
@@ -43,21 +43,6 @@ int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
return -ENODEV;
}
pm->larbvenc = &pdev->dev;
-
- node = of_parse_phandle(dev->of_node, "mediatek,larb", 1);
- if (!node) {
- mtk_v4l2_err("no mediatek,larb found");
- return -ENODEV;
- }
-
- pdev = of_find_device_by_node(node);
- of_node_put(node);
- if (!pdev) {
- mtk_v4l2_err("no mediatek,larb device found");
- return -ENODEV;
- }
-
- pm->larbvenclt = &pdev->dev;
pdev = mtkdev->plat_dev;
pm->dev = &pdev->dev;
@@ -94,11 +79,6 @@ int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
return ret;
}
-void mtk_vcodec_release_enc_pm(struct mtk_vcodec_dev *mtkdev)
-{
-}
-
-
void mtk_vcodec_enc_clock_on(struct mtk_vcodec_pm *pm)
{
struct mtk_vcodec_clk *enc_clk = &pm->venc_clk;
@@ -116,18 +96,10 @@ void mtk_vcodec_enc_clock_on(struct mtk_vcodec_pm *pm)
ret = mtk_smi_larb_get(pm->larbvenc);
if (ret) {
mtk_v4l2_err("mtk_smi_larb_get larb3 fail %d", ret);
- goto larbvencerr;
- }
- ret = mtk_smi_larb_get(pm->larbvenclt);
- if (ret) {
- mtk_v4l2_err("mtk_smi_larb_get larb4 fail %d", ret);
- goto larbvenclterr;
+ goto clkerr;
}
return;
-larbvenclterr:
- mtk_smi_larb_put(pm->larbvenc);
-larbvencerr:
clkerr:
for (i -= 1; i >= 0; i--)
clk_disable_unprepare(enc_clk->clk_info[i].vcodec_clk);
@@ -139,7 +111,6 @@ void mtk_vcodec_enc_clock_off(struct mtk_vcodec_pm *pm)
int i = 0;
mtk_smi_larb_put(pm->larbvenc);
- mtk_smi_larb_put(pm->larbvenclt);
for (i = enc_clk->clk_num - 1; i >= 0; i--)
clk_disable_unprepare(enc_clk->clk_info[i].vcodec_clk);
}
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.h
index b7ecdfd..c1b5986 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.h
@@ -10,7 +10,6 @@
#include "mtk_vcodec_drv.h"
int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *dev);
-void mtk_vcodec_release_enc_pm(struct mtk_vcodec_dev *dev);
void mtk_vcodec_enc_clock_on(struct mtk_vcodec_pm *pm);
void mtk_vcodec_enc_clock_off(struct mtk_vcodec_pm *pm);
diff --git a/drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c b/drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c
index 11abb19..8267a9c 100644
--- a/drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c
+++ b/drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c
@@ -367,7 +367,7 @@ static int vp8_enc_encode(void *handle,
mtk_vcodec_debug_enter(inst);
- enable_irq(ctx->dev->enc_lt_irq);
+ enable_irq(ctx->dev->enc_irq);
switch (opt) {
case VENC_START_OPT_ENCODE_FRAME:
@@ -386,7 +386,7 @@ static int vp8_enc_encode(void *handle,
encode_err:
- disable_irq(ctx->dev->enc_lt_irq);
+ disable_irq(ctx->dev->enc_irq);
mtk_vcodec_debug_leave(inst);
return ret;
--
1.9.1
^ permalink raw reply related
* [PATCH v4 07/17] media: mtk-mdp: Get rid of mtk_smi_larb_get/put
From: Yong Wu @ 2020-05-30 8:10 UTC (permalink / raw)
To: Matthias Brugger, Joerg Roedel, Rob Herring
Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
linux-mediatek, srv_heupstream, devicetree, linux-kernel,
linux-arm-kernel, iommu, yong.wu, youlin.pei, Nicolas Boichat,
Matthias Kaehlcke, anan.sun, cui.zhang, chao.hao, ming-fan.chen,
eizan, acourbot, Minghsiu Tsai, Houlong Wei
In-Reply-To: <1590826218-23653-1-git-send-email-yong.wu@mediatek.com>
MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the mdp device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.
CC: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
CC: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 44 +--------------------------
drivers/media/platform/mtk-mdp/mtk_mdp_comp.h | 2 --
drivers/media/platform/mtk-mdp/mtk_mdp_core.c | 1 -
3 files changed, 1 insertion(+), 46 deletions(-)
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
index 228c58f..388ae67 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
@@ -13,7 +13,6 @@
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <soc/mediatek/smi.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
@@ -58,18 +57,6 @@ void mtk_mdp_comp_clock_on(struct mtk_mdp_comp *comp)
{
int i, err;
- if (comp->larb_dev) {
- err = mtk_smi_larb_get(comp->larb_dev);
- if (err) {
- enum mtk_mdp_comp_type comp_type =
- (enum mtk_mdp_comp_type)
- of_device_get_match_data(comp->dev);
- dev_err(comp->dev,
- "failed to get larb, err %d. type:%d\n",
- err, comp_type);
- }
- }
-
err = pm_runtime_get_sync(comp->dev);
if (err < 0)
dev_err(comp->dev,
@@ -97,9 +84,6 @@ void mtk_mdp_comp_clock_off(struct mtk_mdp_comp *comp)
clk_disable_unprepare(comp->clk[i]);
}
- if (comp->larb_dev)
- mtk_smi_larb_put(comp->larb_dev);
-
pm_runtime_put_sync(comp->dev);
}
@@ -132,12 +116,10 @@ static void mtk_mdp_comp_unbind(struct device *dev, struct device *master,
int mtk_mdp_comp_init(struct mtk_mdp_comp *comp, struct device *dev)
{
- struct device_node *larb_node;
- struct platform_device *larb_pdev;
- int i;
struct device_node *node = dev->of_node;
enum mtk_mdp_comp_type comp_type =
(enum mtk_mdp_comp_type)of_device_get_match_data(dev);
+ int i;
INIT_LIST_HEAD(&comp->node);
comp->dev = dev;
@@ -156,30 +138,6 @@ int mtk_mdp_comp_init(struct mtk_mdp_comp *comp, struct device *dev)
break;
}
- /* Only DMA capable components need the LARB property */
- comp->larb_dev = NULL;
- if (comp_type != MTK_MDP_RDMA &&
- comp_type != MTK_MDP_WDMA &&
- comp_type != MTK_MDP_WROT)
- return 0;
-
- larb_node = of_parse_phandle(node, "mediatek,larb", 0);
- if (!larb_node) {
- dev_err(dev,
- "Missing mediadek,larb phandle in %pOF node\n", node);
- return -EINVAL;
- }
-
- larb_pdev = of_find_device_by_node(larb_node);
- if (!larb_pdev) {
- dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
- of_node_put(larb_node);
- return -EPROBE_DEFER;
- }
- of_node_put(larb_node);
-
- comp->larb_dev = &larb_pdev->dev;
-
return 0;
}
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
index de158d3..355e226 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
@@ -11,13 +11,11 @@
* struct mtk_mdp_comp - the MDP's function component data
* @node: list node to track sibing MDP components
* @clk: clocks required for component
- * @larb_dev: SMI device required for component
* @dev: component's device
*/
struct mtk_mdp_comp {
struct list_head node;
struct clk *clk[2];
- struct device *larb_dev;
struct device *dev;
};
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
index 133d107..bc5472d 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
@@ -18,7 +18,6 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/workqueue.h>
-#include <soc/mediatek/smi.h>
#include "mtk_mdp_comp.h"
#include "mtk_mdp_core.h"
--
1.9.1
^ permalink raw reply related
* [PATCH v4 06/17] media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
From: Yong Wu @ 2020-05-30 8:10 UTC (permalink / raw)
To: Matthias Brugger, Joerg Roedel, Rob Herring
Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
linux-mediatek, srv_heupstream, devicetree, linux-kernel,
linux-arm-kernel, iommu, yong.wu, youlin.pei, Nicolas Boichat,
Matthias Kaehlcke, anan.sun, cui.zhang, chao.hao, ming-fan.chen,
eizan, acourbot, Rick Chang
In-Reply-To: <1590826218-23653-1-git-send-email-yong.wu@mediatek.com>
MediaTek IOMMU has already added device_link between the consumer
and smi-larb device. If the jpg device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.
CC: Rick Chang <rick.chang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 22 ----------------------
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h | 2 --
2 files changed, 24 deletions(-)
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
index f82a81a..21fba6f 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
@@ -21,7 +21,6 @@
#include <media/v4l2-ioctl.h>
#include <media/videobuf2-core.h>
#include <media/videobuf2-dma-contig.h>
-#include <soc/mediatek/smi.h>
#include "mtk_jpeg_hw.h"
#include "mtk_jpeg_core.h"
@@ -893,11 +892,6 @@ static int mtk_jpeg_queue_init(void *priv, struct vb2_queue *src_vq,
static void mtk_jpeg_clk_on(struct mtk_jpeg_dev *jpeg)
{
- int ret;
-
- ret = mtk_smi_larb_get(jpeg->larb);
- if (ret)
- dev_err(jpeg->dev, "mtk_smi_larb_get larbvdec fail %d\n", ret);
clk_prepare_enable(jpeg->clk_jdec_smi);
clk_prepare_enable(jpeg->clk_jdec);
}
@@ -906,7 +900,6 @@ static void mtk_jpeg_clk_off(struct mtk_jpeg_dev *jpeg)
{
clk_disable_unprepare(jpeg->clk_jdec);
clk_disable_unprepare(jpeg->clk_jdec_smi);
- mtk_smi_larb_put(jpeg->larb);
}
static irqreturn_t mtk_jpeg_dec_irq(int irq, void *priv)
@@ -1051,21 +1044,6 @@ static int mtk_jpeg_release(struct file *file)
static int mtk_jpeg_clk_init(struct mtk_jpeg_dev *jpeg)
{
- struct device_node *node;
- struct platform_device *pdev;
-
- node = of_parse_phandle(jpeg->dev->of_node, "mediatek,larb", 0);
- if (!node)
- return -EINVAL;
- pdev = of_find_device_by_node(node);
- if (WARN_ON(!pdev)) {
- of_node_put(node);
- return -EINVAL;
- }
- of_node_put(node);
-
- jpeg->larb = &pdev->dev;
-
jpeg->clk_jdec = devm_clk_get(jpeg->dev, "jpgdec");
if (IS_ERR(jpeg->clk_jdec))
return PTR_ERR(jpeg->clk_jdec);
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
index 999bd14..8579494 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
@@ -47,7 +47,6 @@ enum mtk_jpeg_ctx_state {
* @dec_reg_base: JPEG registers mapping
* @clk_jdec: JPEG hw working clock
* @clk_jdec_smi: JPEG SMI bus clock
- * @larb: SMI device
*/
struct mtk_jpeg_dev {
struct mutex lock;
@@ -61,7 +60,6 @@ struct mtk_jpeg_dev {
void __iomem *dec_reg_base;
struct clk *clk_jdec;
struct clk *clk_jdec_smi;
- struct device *larb;
};
/**
--
1.9.1
^ permalink raw reply related
* [PATCH v4 05/17] memory: mtk-smi: Add device-link between smi-larb and smi-common
From: Yong Wu @ 2020-05-30 8:10 UTC (permalink / raw)
To: Matthias Brugger, Joerg Roedel, Rob Herring
Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
linux-mediatek, srv_heupstream, devicetree, linux-kernel,
linux-arm-kernel, iommu, yong.wu, youlin.pei, Nicolas Boichat,
Matthias Kaehlcke, anan.sun, cui.zhang, chao.hao, ming-fan.chen,
eizan, acourbot
In-Reply-To: <1590826218-23653-1-git-send-email-yong.wu@mediatek.com>
Normally, If the smi-larb HW need work, we should enable the smi-common
HW power and clock firstly.
This patch adds device-link between the smi-larb dev and the smi-common
dev. then If pm_runtime_get_sync(smi-larb-dev), the pm_runtime_get_sync
(smi-common-dev) will be called automatically.
Also, Add DL_FLAG_STATELESS to avoid the smi-common clocks be gated when
probe.
CC: Matthias Brugger <matthias.bgg@gmail.com>
Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
drivers/memory/mtk-smi.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index a113e81..6cdefda 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -273,6 +273,7 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *smi_node;
struct platform_device *smi_pdev;
+ struct device_link *link;
larb = devm_kzalloc(dev, sizeof(*larb), GFP_KERNEL);
if (!larb)
@@ -312,6 +313,12 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
if (!platform_get_drvdata(smi_pdev))
return -EPROBE_DEFER;
larb->smi_common_dev = &smi_pdev->dev;
+ link = device_link_add(dev, larb->smi_common_dev,
+ DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+ if (!link) {
+ dev_err(dev, "Unable to link smi-common dev\n");
+ return -ENODEV;
+ }
} else {
dev_err(dev, "Failed to get the smi_common device\n");
return -EINVAL;
@@ -324,6 +331,9 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
static int mtk_smi_larb_remove(struct platform_device *pdev)
{
+ struct mtk_smi_larb *larb = platform_get_drvdata(pdev);
+
+ device_link_remove(&pdev->dev, larb->smi_common_dev);
pm_runtime_disable(&pdev->dev);
component_del(&pdev->dev, &mtk_smi_larb_component_ops);
return 0;
@@ -335,17 +345,9 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
const struct mtk_smi_larb_gen *larb_gen = larb->larb_gen;
int ret;
- /* Power on smi-common. */
- ret = pm_runtime_get_sync(larb->smi_common_dev);
- if (ret < 0) {
- dev_err(dev, "Failed to pm get for smi-common(%d).\n", ret);
- return ret;
- }
-
ret = mtk_smi_clk_enable(&larb->smi);
if (ret < 0) {
dev_err(dev, "Failed to enable clock(%d).\n", ret);
- pm_runtime_put_sync(larb->smi_common_dev);
return ret;
}
@@ -360,7 +362,6 @@ static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
struct mtk_smi_larb *larb = dev_get_drvdata(dev);
mtk_smi_clk_disable(&larb->smi);
- pm_runtime_put_sync(larb->smi_common_dev);
return 0;
}
--
1.9.1
^ permalink raw reply related
* [PATCH v4 04/17] iommu/mediatek: Add device_link between the consumer and the larb devices
From: Yong Wu @ 2020-05-30 8:10 UTC (permalink / raw)
To: Matthias Brugger, Joerg Roedel, Rob Herring
Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
linux-mediatek, srv_heupstream, devicetree, linux-kernel,
linux-arm-kernel, iommu, yong.wu, youlin.pei, Nicolas Boichat,
Matthias Kaehlcke, anan.sun, cui.zhang, chao.hao, ming-fan.chen,
eizan, acourbot
In-Reply-To: <1590826218-23653-1-git-send-email-yong.wu@mediatek.com>
MediaTek IOMMU don't have its power-domain. all the consumer connect
with smi-larb, then connect with smi-common.
M4U
|
smi-common
|
-------------
| | ...
| |
larb1 larb2
| |
vdec venc
When the consumer works, it should enable the smi-larb's power which
also need enable the smi-common's power firstly.
Thus, First of all, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.
This patch adds device_link between the consumer and the larbs.
When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
pm_runtime_xx to keep the original status of clocks. It can avoid two
issues:
1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
all the clocks are enabled before entering kernel, but the clocks for
display HW(always in larb0) will be gated after clk_enable and clk_disable
called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
operation happened before display driver probe. At that time, the display
HW will be abnormal.
2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
pm_runtime_xx to avoid the deadlock.
Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
device_link_removed should be added explicitly.
[1] http://lists.infradead.org/pipermail/linux-mediatek/2019-July/
021500.html
[2] https://lore.kernel.org/patchwork/patch/1086569/
Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
drivers/iommu/mtk_iommu.c | 18 ++++++++++++++++++
drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
2 files changed, 37 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 7d8f3d0..5c3a6ba 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -445,22 +445,40 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
{
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
struct mtk_iommu_data *data;
+ struct device_link *link;
+ struct device *larbdev;
+ unsigned int larbid;
if (!fwspec || fwspec->ops != &mtk_iommu_ops)
return ERR_PTR(-ENODEV); /* Not a iommu client device */
data = dev_iommu_priv_get(dev);
+ /* Link the consumer device with the smi-larb device(supplier) */
+ larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+ larbdev = data->larb_imu[larbid].dev;
+ link = device_link_add(dev, larbdev,
+ DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+ if (!link)
+ dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
return &data->iommu;
}
static void mtk_iommu_release_device(struct device *dev)
{
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+ struct mtk_iommu_data *data;
+ struct device *larbdev;
+ unsigned int larbid;
if (!fwspec || fwspec->ops != &mtk_iommu_ops)
return;
+ data = dev_iommu_priv_get(dev);
+ larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+ larbdev = data->larb_imu[larbid].dev;
+ device_link_remove(dev, larbdev);
+
iommu_fwspec_free(dev);
}
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 02858a0..26b6c79 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -422,7 +422,9 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
struct of_phandle_args iommu_spec;
struct of_phandle_iterator it;
struct mtk_iommu_data *data;
- int err;
+ struct device_link *link;
+ struct device *larbdev;
+ int err, larbid;
of_for_each_phandle(&it, err, dev->of_node, "iommus",
"#iommu-cells", -1) {
@@ -444,6 +446,14 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
data = dev_iommu_priv_get(dev);
+ /* Link the consumer device with the smi-larb device(supplier) */
+ larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+ larbdev = data->larb_imu[larbid].dev;
+ link = device_link_add(dev, larbdev,
+ DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+ if (!link)
+ dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
+
return &data->iommu;
}
@@ -465,10 +475,18 @@ static void mtk_iommu_probe_finalize(struct device *dev)
static void mtk_iommu_release_device(struct device *dev)
{
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+ struct mtk_iommu_data *data;
+ struct device *larbdev;
+ unsigned int larbid;
if (!fwspec || fwspec->ops != &mtk_iommu_ops)
return;
+ data = dev_iommu_priv_get(dev);
+ larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+ larbdev = data->larb_imu[larbid].dev;
+ device_link_remove(dev, larbdev);
+
iommu_fwspec_free(dev);
}
--
1.9.1
^ permalink raw reply related
* [PATCH v4 03/17] iommu/mediatek: Add probe_defer for smi-larb
From: Yong Wu @ 2020-05-30 8:10 UTC (permalink / raw)
To: Matthias Brugger, Joerg Roedel, Rob Herring
Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
linux-mediatek, srv_heupstream, devicetree, linux-kernel,
linux-arm-kernel, iommu, yong.wu, youlin.pei, Nicolas Boichat,
Matthias Kaehlcke, anan.sun, cui.zhang, chao.hao, ming-fan.chen,
eizan, acourbot
In-Reply-To: <1590826218-23653-1-git-send-email-yong.wu@mediatek.com>
The iommu consumer should use device_link to connect with the
smi-larb(supplier). then the smi-larb should run before the iommu
consumer. Here we delay the iommu driver until the smi driver is
ready, then all the iommu consumer always is after the smi driver.
When there is no this patch, if some consumer drivers run before
smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
device_link_add, then device_links_driver_bound will use WARN_ON
to complain that the link_status of supplier is not right.
This is a preparing patch for adding device_link.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
drivers/iommu/mtk_iommu.c | 8 +++++++-
drivers/iommu/mtk_iommu_v1.c | 7 ++++++-
2 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 2be96f1..7d8f3d0 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -643,6 +643,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
for (i = 0; i < larb_nr; i++) {
struct device_node *larbnode;
struct platform_device *plarbdev;
+ bool larbdev_is_bound = false;
u32 id;
larbnode = of_parse_phandle(dev->of_node, "mediatek,larbs", i);
@@ -659,7 +660,12 @@ static int mtk_iommu_probe(struct platform_device *pdev)
id = i;
plarbdev = of_find_device_by_node(larbnode);
- if (!plarbdev) {
+ if (plarbdev) {
+ device_lock(&plarbdev->dev);
+ larbdev_is_bound = device_is_bound(&plarbdev->dev);
+ device_unlock(&plarbdev->dev);
+ }
+ if (!plarbdev || !larbdev_is_bound) {
of_node_put(larbnode);
return -EPROBE_DEFER;
}
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 1245e0c..02858a0 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -591,10 +591,15 @@ static int mtk_iommu_probe(struct platform_device *pdev)
plarbdev = of_find_device_by_node(larb_spec.np);
if (!plarbdev) {
+ bool larbdev_is_bound;
+
plarbdev = of_platform_device_create(
larb_spec.np, NULL,
platform_bus_type.dev_root);
- if (!plarbdev) {
+ device_lock(&plarbdev->dev);
+ larbdev_is_bound = device_is_bound(&plarbdev->dev);
+ device_unlock(&plarbdev->dev);
+ if (!plarbdev || !larbdev_is_bound) {
of_node_put(larb_spec.np);
return -EPROBE_DEFER;
}
--
1.9.1
^ permalink raw reply related
* [PATCH v4 02/17] dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
From: Yong Wu @ 2020-05-30 8:10 UTC (permalink / raw)
To: Matthias Brugger, Joerg Roedel, Rob Herring
Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
linux-mediatek, srv_heupstream, devicetree, linux-kernel,
linux-arm-kernel, iommu, yong.wu, youlin.pei, Nicolas Boichat,
Matthias Kaehlcke, anan.sun, cui.zhang, chao.hao, ming-fan.chen,
eizan, acourbot
In-Reply-To: <1590826218-23653-1-git-send-email-yong.wu@mediatek.com>
After adding device_link between the consumer with the smi-larbs,
if the consumer call its owner pm_runtime_get(_sync), the
pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. Thus, the consumer don't need the property.
And IOMMU also know which larb this consumer connects with from
iommu id in the "iommus=" property.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
.../devicetree/bindings/display/mediatek/mediatek,disp.txt | 9 ---------
.../devicetree/bindings/media/mediatek-jpeg-decoder.txt | 4 ----
Documentation/devicetree/bindings/media/mediatek-mdp.txt | 8 --------
Documentation/devicetree/bindings/media/mediatek-vcodec.txt | 4 ----
4 files changed, 25 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index b91e709..c7e2eb8 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -60,8 +60,6 @@ Required properties (DMA function blocks):
"mediatek,<chip>-disp-rdma"
"mediatek,<chip>-disp-wdma"
the supported chips are mt2701 and mt8173.
-- larb: Should contain a phandle pointing to the local arbiter device as defined
- in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
- iommus: Should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
@@ -82,7 +80,6 @@ ovl0: ovl@1400c000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_OVL0>;
iommus = <&iommu M4U_PORT_DISP_OVL0>;
- mediatek,larb = <&larb0>;
};
ovl1: ovl@1400d000 {
@@ -92,7 +89,6 @@ ovl1: ovl@1400d000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_OVL1>;
iommus = <&iommu M4U_PORT_DISP_OVL1>;
- mediatek,larb = <&larb4>;
};
rdma0: rdma@1400e000 {
@@ -102,7 +98,6 @@ rdma0: rdma@1400e000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA0>;
iommus = <&iommu M4U_PORT_DISP_RDMA0>;
- mediatek,larb = <&larb0>;
};
rdma1: rdma@1400f000 {
@@ -112,7 +107,6 @@ rdma1: rdma@1400f000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA1>;
iommus = <&iommu M4U_PORT_DISP_RDMA1>;
- mediatek,larb = <&larb4>;
};
rdma2: rdma@14010000 {
@@ -122,7 +116,6 @@ rdma2: rdma@14010000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA2>;
iommus = <&iommu M4U_PORT_DISP_RDMA2>;
- mediatek,larb = <&larb4>;
};
wdma0: wdma@14011000 {
@@ -132,7 +125,6 @@ wdma0: wdma@14011000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_WDMA0>;
iommus = <&iommu M4U_PORT_DISP_WDMA0>;
- mediatek,larb = <&larb0>;
};
wdma1: wdma@14012000 {
@@ -142,7 +134,6 @@ wdma1: wdma@14012000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_WDMA1>;
iommus = <&iommu M4U_PORT_DISP_WDMA1>;
- mediatek,larb = <&larb4>;
};
color0: color@14013000 {
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
index 044b119..7978f21 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
@@ -15,9 +15,6 @@ Required properties:
- clock-names: must contain "jpgdec-smi" and "jpgdec".
- power-domains: a phandle to the power domain, see
Documentation/devicetree/bindings/power/power_domain.txt for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
- Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
- for details.
- iommus: should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
@@ -32,7 +29,6 @@ Example:
clock-names = "jpgdec-smi",
"jpgdec";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
- mediatek,larb = <&larb2>;
iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
<&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
};
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
index 0d03e3a..df69c5a 100644
--- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
@@ -27,9 +27,6 @@ Required properties (DMA function blocks, child node):
- iommus: should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
- Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
- for details.
Example:
mdp_rdma0: rdma@14001000 {
@@ -40,7 +37,6 @@ Example:
<&mmsys CLK_MM_MUTEX_32K>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_RDMA0>;
- mediatek,larb = <&larb0>;
mediatek,vpu = <&vpu>;
};
@@ -51,7 +47,6 @@ Example:
<&mmsys CLK_MM_MUTEX_32K>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_RDMA1>;
- mediatek,larb = <&larb4>;
};
mdp_rsz0: rsz@14003000 {
@@ -81,7 +76,6 @@ Example:
clocks = <&mmsys CLK_MM_MDP_WDMA>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WDMA>;
- mediatek,larb = <&larb0>;
};
mdp_wrot0: wrot@14007000 {
@@ -90,7 +84,6 @@ Example:
clocks = <&mmsys CLK_MM_MDP_WROT0>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WROT0>;
- mediatek,larb = <&larb0>;
};
mdp_wrot1: wrot@14008000 {
@@ -99,5 +92,4 @@ Example:
clocks = <&mmsys CLK_MM_MDP_WROT1>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WROT1>;
- mediatek,larb = <&larb4>;
};
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index 1023740..50a27f2 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -12,7 +12,6 @@ Required properties:
- reg : Physical base address of the video codec registers and length of
memory mapped region.
- interrupts : interrupt number to the cpu.
-- mediatek,larb : must contain the local arbiters in the current Socs.
- clocks : list of clock specifiers, corresponding to entries in
the clock-names property.
- clock-names:
@@ -45,7 +44,6 @@ vcodec_dec: vcodec@16000000 {
<0 0x16027800 0 0x800>, /*VP8_VL*/
<0 0x16028400 0 0x400>; /*VP9_VD*/
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
- mediatek,larb = <&larb1>;
iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
<&iommu M4U_PORT_HW_VDEC_PP_EXT>,
<&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -98,7 +96,6 @@ vcodec_enc: vcodec@18002000 {
<&iommu M4U_PORT_VENC_REF_CHROMA>,
<&iommu M4U_PORT_VENC_NBM_RDMA>,
<&iommu M4U_PORT_VENC_NBM_WDMA>;
- mediatek,larb = <&larb3>;
mediatek,vpu = <&vpu>;
clocks = <&topckgen CLK_TOP_VENC_SEL>;
clock-names = "venc_sel";
@@ -119,7 +116,6 @@ vcodec_enc_lt: vcodec@19002000 {
<&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
<&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
<&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
- mediatek,larb = <&larb5>;
mediatek,vpu = <&vpu>;
clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
clock-names = "venc_lt_sel";
--
1.9.1
^ permalink raw reply related
* [PATCH v4 01/17] media: dt-binding: mtk-vcodec: Separating mtk-vcodec encode node.
From: Yong Wu @ 2020-05-30 8:10 UTC (permalink / raw)
To: Matthias Brugger, Joerg Roedel, Rob Herring
Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
linux-mediatek, srv_heupstream, devicetree, linux-kernel,
linux-arm-kernel, iommu, yong.wu, youlin.pei, Nicolas Boichat,
Matthias Kaehlcke, anan.sun, cui.zhang, chao.hao, ming-fan.chen,
eizan, acourbot, Maoguang Meng, Hsin-Yi Wang, Irui Wang
In-Reply-To: <1590826218-23653-1-git-send-email-yong.wu@mediatek.com>
From: Maoguang Meng <maoguang.meng@mediatek.com>
Update binding document since the avc and vp8 hardware encoder in
mt8173 are now separated. Separate "mediatek,mt8173-vcodec-enc" to
"mediatek,mt8173-vcodec-vp8-enc" and "mediatek,mt8173-vcodec-avc-enc".
This is a preparing patch for smi cleaning up "mediatek,larb".
Signed-off-by: Maoguang Meng <maoguang.meng@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
.../devicetree/bindings/media/mediatek-vcodec.txt | 58 ++++++++++++----------
1 file changed, 31 insertions(+), 27 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index 8093335..1023740 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -4,7 +4,9 @@ Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
supports high resolution encoding and decoding functionalities.
Required properties:
-- compatible : "mediatek,mt8173-vcodec-enc" for MT8173 encoder
+- compatible : must be one of the following string:
+ "mediatek,mt8173-vcodec-vp8-enc" for mt8173 vp8 encoder.
+ "mediatek,mt8173-vcodec-avc-enc" for mt8173 avc encoder.
"mediatek,mt8183-vcodec-enc" for MT8183 encoder.
"mediatek,mt8173-vcodec-dec" for MT8173 decoder.
- reg : Physical base address of the video codec registers and length of
@@ -13,10 +15,11 @@ Required properties:
- mediatek,larb : must contain the local arbiters in the current Socs.
- clocks : list of clock specifiers, corresponding to entries in
the clock-names property.
-- clock-names: encoder must contain "venc_sel_src", "venc_sel",,
- "venc_lt_sel_src", "venc_lt_sel", decoder must contain "vcodecpll",
- "univpll_d2", "clk_cci400_sel", "vdec_sel", "vdecpll", "vencpll",
- "venc_lt_sel", "vdec_bus_clk_src".
+- clock-names:
+ avc venc must contain "venc_sel";
+ vp8 venc must contain "venc_lt_sel";
+ decoder must contain "vcodecpll", "univpll_d2", "clk_cci400_sel",
+ "vdec_sel", "vdecpll", "vencpll", "venc_lt_sel", "vdec_bus_clk_src".
- iommus : should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
@@ -80,14 +83,10 @@ vcodec_dec: vcodec@16000000 {
assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
};
- vcodec_enc: vcodec@18002000 {
- compatible = "mediatek,mt8173-vcodec-enc";
- reg = <0 0x18002000 0 0x1000>, /*VENC_SYS*/
- <0 0x19002000 0 0x1000>; /*VENC_LT_SYS*/
- interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
- mediatek,larb = <&larb3>,
- <&larb5>;
+vcodec_enc: vcodec@18002000 {
+ compatible = "mediatek,mt8173-vcodec-avc-enc";
+ reg = <0 0x18002000 0 0x1000>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
iommus = <&iommu M4U_PORT_VENC_RCPU>,
<&iommu M4U_PORT_VENC_REC>,
<&iommu M4U_PORT_VENC_BSDMA>,
@@ -98,8 +97,20 @@ vcodec_dec: vcodec@16000000 {
<&iommu M4U_PORT_VENC_REF_LUMA>,
<&iommu M4U_PORT_VENC_REF_CHROMA>,
<&iommu M4U_PORT_VENC_NBM_RDMA>,
- <&iommu M4U_PORT_VENC_NBM_WDMA>,
- <&iommu M4U_PORT_VENC_RCPU_SET2>,
+ <&iommu M4U_PORT_VENC_NBM_WDMA>;
+ mediatek,larb = <&larb3>;
+ mediatek,vpu = <&vpu>;
+ clocks = <&topckgen CLK_TOP_VENC_SEL>;
+ clock-names = "venc_sel";
+ assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>;
+ };
+
+vcodec_enc_lt: vcodec@19002000 {
+ compatible = "mediatek,mt8173-vcodec-vp8-enc";
+ reg = <0 0x19002000 0 0x1000>; /* VENC_LT_SYS */
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
+ iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>,
<&iommu M4U_PORT_VENC_REC_FRM_SET2>,
<&iommu M4U_PORT_VENC_BSDMA_SET2>,
<&iommu M4U_PORT_VENC_SV_COMA_SET2>,
@@ -108,17 +119,10 @@ vcodec_dec: vcodec@16000000 {
<&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
<&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
<&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
+ mediatek,larb = <&larb5>;
mediatek,vpu = <&vpu>;
- clocks = <&topckgen CLK_TOP_VENCPLL_D2>,
- <&topckgen CLK_TOP_VENC_SEL>,
- <&topckgen CLK_TOP_UNIVPLL1_D2>,
- <&topckgen CLK_TOP_VENC_LT_SEL>;
- clock-names = "venc_sel_src",
- "venc_sel",
- "venc_lt_sel_src",
- "venc_lt_sel";
- assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>,
- <&topckgen CLK_TOP_VENC_LT_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>,
- <&topckgen CLK_TOP_UNIVPLL1_D2>;
+ clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
+ clock-names = "venc_lt_sel";
+ assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>;
};
--
1.9.1
^ permalink raw reply related
* [PATCH v4 00/17] Clean up "mediatek,larb" after adding device_link
From: Yong Wu @ 2020-05-30 8:10 UTC (permalink / raw)
To: Matthias Brugger, Joerg Roedel, Rob Herring
Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
linux-mediatek, srv_heupstream, devicetree, linux-kernel,
linux-arm-kernel, iommu, yong.wu, youlin.pei, Nicolas Boichat,
Matthias Kaehlcke, anan.sun, cui.zhang, chao.hao, ming-fan.chen,
eizan, acourbot
MediaTek IOMMU block diagram always like below:
M4U
|
smi-common
|
-------------
| | ...
| |
larb1 larb2
| |
vdec venc
All the consumer connect with smi-larb, then connect with smi-common.
MediaTek IOMMU don't have its power-domain. When the consumer works,
it should enable the smi-larb's power which also need enable the smi-common's
power firstly.
Thus, Firstly, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.
After adding the device_link, then "mediatek,larb" property can be removed.
the iommu consumer don't need call the mtk_smi_larb_get/put to enable
the power and clock of smi-larb and smi-common.
This patchset depends on v5.7-rc1 and several patchset. Mainly venc and MDP
adjust their flow, then this patchset can work successfully.
a) IOMMU depend on [1][2].
b) MDP depend on [3][4][5].
c) VENC depend on [6].
[1] iommu: Move iommu_group setup to IOMMU core code
https://lore.kernel.org/linux-iommu/20200429133712.31431-1-joro@8bytes.org/
[2] iommu/mediatek-v1: Fix a build warning for a unused variable 'data'
https://lore.kernel.org/linux-iommu/1589875064-662-1-git-send-email-yong.wu@mediatek.com/
[3] arm64: dts: mt8173: fix mdp aliases property name
https://lore.kernel.org/linux-mediatek/20200414030815.192104-1-hsinyi@chromium.org/
[4] MTK MDP driver cleanups to prep for futher work
https://lore.kernel.org/linux-mediatek/20200507102345.81849-1-eizan@chromium.org/
[5] Refactor MDP driver and add dummy component driver
https://lore.kernel.org/linux-mediatek/20200506084039.249977-1-eizan@chromium.org/
[6] media: mtk-vcodec: venc: support for MT8183
https://lore.kernel.org/linux-mediatek/20200520082723.96136-1-acourbot@chromium.org/
[1][2][3] have already been in lastest linux-next.
Change notes:
v4: base on v5.7-rc1.
1) Move drm PM patch before smi patchs.
2) Change builtin_platform_driver to module_platform_driver since we may need
build as module.
3) Rebase many patchset as above.
v3: https://lore.kernel.org/linux-iommu/1567503456-24725-1-git-send-email-yong.wu@mediatek.com/
1) rebase on v5.3-rc1 and the latest mt8183 patchset.
2) Use device_is_bound to check whether the driver is ready from Matthias.
3) Add DL_FLAG_STATELESS flag when calling device_link_add and explain the
reason in the commit message[3/14].
4) Add a display patch[12/14] into this series. otherwise it may affect
display HW fastlogo even though it don't happen in mt8183.
v2: http://lists.infradead.org/pipermail/linux-mediatek/2019-June/020440.html
1) rebase on v5.2-rc1.
2) Move adding device_link between the consumer and smi-larb into
iommu_add_device from Robin.
3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
4) Remove the shutdown callback in iommu.
v1: https://lists.linuxfoundation.org/pipermail/iommu/2019-January/032387.html
Irui Wang (1):
arm64: dts: mt8173: Separate mtk-vcodec-enc node
Maoguang Meng (2):
media: dt-binding: mtk-vcodec: Separating mtk-vcodec encode node.
media: mtk-vcodec: separate mtk-vcodec-enc node.
Yong Wu (13):
dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
iommu/mediatek: Add probe_defer for smi-larb
iommu/mediatek: Add device_link between the consumer and the larb
devices
memory: mtk-smi: Add device-link between smi-larb and smi-common
media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
media: mtk-mdp: Get rid of mtk_smi_larb_get/put
media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
drm/mediatek: Get rid of mtk_smi_larb_get/put
memory: mtk-smi: Get rid of mtk_smi_larb_get/put
iommu/mediatek: Use module_platform_driver
memory: mtk-smi: Use device_is_bound to check if smi-common is ready
arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes
Yongqiang Niu (1):
drm/mediatek: Add pm runtime support for ovl and rdma
.../bindings/display/mediatek/mediatek,disp.txt | 9 --
.../bindings/media/mediatek-jpeg-decoder.txt | 4 -
.../devicetree/bindings/media/mediatek-mdp.txt | 8 --
.../devicetree/bindings/media/mediatek-vcodec.txt | 58 +++++-----
arch/arm/boot/dts/mt2701.dtsi | 1 -
arch/arm/boot/dts/mt7623.dtsi | 1 -
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 72 +++++-------
drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 9 +-
drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 9 +-
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 19 +--
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 21 +---
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 2 +-
drivers/iommu/mtk_iommu.c | 44 ++++---
drivers/iommu/mtk_iommu_v1.c | 39 +++++--
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 22 ----
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h | 2 -
drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 44 +------
drivers/media/platform/mtk-mdp/mtk_mdp_comp.h | 2 -
drivers/media/platform/mtk-mdp/mtk_mdp_core.c | 1 -
.../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 19 ---
drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 13 +--
drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 24 +++-
.../media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 127 +++++++++------------
.../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 56 ---------
.../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.h | 1 -
.../media/platform/mtk-vcodec/venc/venc_vp8_if.c | 4 +-
drivers/memory/mtk-smi.c | 41 +++----
include/soc/mediatek/smi.h | 20 ----
28 files changed, 246 insertions(+), 426 deletions(-)
--
1.9.1
^ permalink raw reply
* Re: [PATCH v2 4/4] pinctrl: bcm2835: Add support for wake-up interrupts
From: Stefan Wahren @ 2020-05-30 7:49 UTC (permalink / raw)
To: Florian Fainelli, linux-kernel
Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Geert Uytterhoeven, Scott Branden, Ray Jui, Linus Walleij,
Matti Vaittinen, open list:PIN CONTROL SUBSYSTEM, Rob Herring,
maintainer:BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE...,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
Nicolas Saenz Julienne,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE
In-Reply-To: <20200529191522.27938-5-f.fainelli@gmail.com>
Hi Florian,
Am 29.05.20 um 21:15 schrieb Florian Fainelli:
> Leverage the IRQCHIP_MASK_ON_SUSPEND flag in order to avoid having to
> specifically treat the GPIO interrupts during suspend and resume, and
> simply implement an irq_set_wake() callback that is responsible for
> enabling the parent wake-up interrupt as a wake-up interrupt.
>
> To avoid allocating unnecessary resources for other chips, the wake-up
> interrupts are only initialized if we have a brcm,bcm7211-gpio
> compatibility string.
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
> drivers/pinctrl/bcm/pinctrl-bcm2835.c | 76 ++++++++++++++++++++++++++-
> 1 file changed, 75 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
> index 1b00d93aa66e..1fbf067a3eed 100644
> --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
> +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
> @@ -19,6 +19,7 @@
> #include <linux/irq.h>
> #include <linux/irqdesc.h>
> #include <linux/init.h>
> +#include <linux/interrupt.h>
> #include <linux/of_address.h>
> #include <linux/of.h>
> #include <linux/of_irq.h>
> @@ -76,6 +77,7 @@
> struct bcm2835_pinctrl {
> struct device *dev;
> void __iomem *base;
> + int *wake_irq;
>
> /* note: locking assumes each bank will have its own unsigned long */
> unsigned long enabled_irq_map[BCM2835_NUM_BANKS];
> @@ -435,6 +437,11 @@ static void bcm2835_gpio_irq_handler(struct irq_desc *desc)
> chained_irq_exit(host_chip, desc);
> }
>
> +static irqreturn_t bcm2835_gpio_wake_irq_handler(int irq, void *dev_id)
> +{
> + return IRQ_HANDLED;
> +}
> +
> static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
> unsigned reg, unsigned offset, bool enable)
> {
> @@ -634,6 +641,34 @@ static void bcm2835_gpio_irq_ack(struct irq_data *data)
> bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
> }
>
> +static int bcm2835_gpio_irq_set_wake(struct irq_data *data, unsigned int on)
> +{
> + struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
> + struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
> + unsigned gpio = irqd_to_hwirq(data);
> + unsigned int irqgroup;
> + int ret = -EINVAL;
> +
> + if (!pc->wake_irq)
> + return ret;
> +
> + if (gpio <= 27)
> + irqgroup = 0;
> + else if (gpio >= 28 && gpio <= 45)
> + irqgroup = 1;
> + else if (gpio >= 46 && gpio <= 53)
> + irqgroup = 2;
in case the BCM7211 has 58 GPIOs, but the wake up interrupts are only
available for the first 54 this should deserve a comment.
> + else
> + return ret;
> +
> + if (on)
> + ret = enable_irq_wake(pc->wake_irq[irqgroup]);
> + else
> + ret = disable_irq_wake(pc->wake_irq[irqgroup]);
> +
> + return ret;
> +}
> +
> static struct irq_chip bcm2835_gpio_irq_chip = {
> .name = MODULE_NAME,
> .irq_enable = bcm2835_gpio_irq_enable,
> @@ -642,6 +677,8 @@ static struct irq_chip bcm2835_gpio_irq_chip = {
> .irq_ack = bcm2835_gpio_irq_ack,
> .irq_mask = bcm2835_gpio_irq_disable,
> .irq_unmask = bcm2835_gpio_irq_enable,
> + .irq_set_wake = bcm2835_gpio_irq_set_wake,
> + .flags = IRQCHIP_MASK_ON_SUSPEND,
> };
>
> static int bcm2835_pctl_get_groups_count(struct pinctrl_dev *pctldev)
> @@ -1154,6 +1191,7 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
> struct resource iomem;
> int err, i;
> const struct of_device_id *match;
> + int is_7211 = 0;
>
> BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2711_NUM_GPIOS);
> BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2711_NUM_GPIOS);
> @@ -1180,6 +1218,7 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
> return -EINVAL;
>
> pdata = match->data;
> + is_7211 = of_device_is_compatible(np, "brcm,bcm7211-gpio");
>
> pc->gpio_chip = *pdata->gpio_chip;
> pc->gpio_chip.parent = dev;
> @@ -1214,6 +1253,15 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
> GFP_KERNEL);
> if (!girq->parents)
> return -ENOMEM;
> +
> + if (is_7211) {
> + pc->wake_irq = devm_kcalloc(dev, BCM2835_NUM_IRQS,
> + sizeof(*pc->wake_irq),
> + GFP_KERNEL);
> + if (!pc->wake_irq)
> + return -ENOMEM;
> + }
> +
> /*
> * Use the same handler for all groups: this is necessary
> * since we use one gpiochip to cover all lines - the
> @@ -1221,8 +1269,34 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
> * bank that was firing the IRQ and look up the per-group
> * and bank data.
> */
> - for (i = 0; i < BCM2835_NUM_IRQS; i++)
> + for (i = 0; i < BCM2835_NUM_IRQS; i++) {
> + int len;
> + char *name;
> +
> girq->parents[i] = irq_of_parse_and_map(np, i);
> + if (!is_7211)
> + continue;
> +
> + /* Skip over the all banks interrupts */
> + pc->wake_irq[i] = irq_of_parse_and_map(np, i +
> + BCM2835_NUM_IRQS + 1);
> +
> + len = strlen(dev_name(pc->dev)) + 16;
> + name = devm_kzalloc(pc->dev, len, GFP_KERNEL);
> + if (!name)
> + return -ENOMEM;
> +
> + snprintf(name, len, "%s:bank%d", dev_name(pc->dev), i);
> +
> + /* These are optional interrupts */
> + err = devm_request_irq(dev, pc->wake_irq[i],
> + bcm2835_gpio_wake_irq_handler,
> + IRQF_SHARED, name, pc);
> + if (err)
> + dev_warn(dev, "unable to request wake IRQ %d\n",
> + pc->wake_irq[i]);
> + }
> +
> girq->default_type = IRQ_TYPE_NONE;
> girq->handler = handle_level_irq;
>
^ permalink raw reply
* [PATCH v4 1/7] dt-bindings: watchdog: Convert DW WDT binding to DT schema
From: Serge Semin @ 2020-05-30 7:35 UTC (permalink / raw)
To: Wim Van Sebroeck, Guenter Roeck, Rob Herring
Cc: Serge Semin, Serge Semin, Rob Herring, Alexey Malahov,
Thomas Bogendoerfer, Arnd Bergmann, linux-mips, linux-watchdog,
devicetree, linux-kernel
In-Reply-To: <20200530073557.22661-1-Sergey.Semin@baikalelectronics.ru>
Modern device tree bindings are supposed to be created as YAML-files
in accordance with dt-schema. This commit replaces the DW Watchdog
legacy bare text bindings with YAML file. As before the binding states
that the corresponding dts node is supposed to have a registers
range, a watchdog timer references clock source, optional reset line and
pre-timeout interrupt.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
---
Changelog v2:
- Rearrange SoBs.
- Discard BE copyright header.
- Replace "additionalProperties: false" with "unevaluatedProperties: false"
property.
- Discard interrupts property from the required properties list.
- Remove a label definition from the binding example.
- Move the asynchronous APB3 clock support into a dedicated patch.
---
.../devicetree/bindings/watchdog/dw_wdt.txt | 24 ---------
.../bindings/watchdog/snps,dw-wdt.yaml | 50 +++++++++++++++++++
2 files changed, 50 insertions(+), 24 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/watchdog/dw_wdt.txt
create mode 100644 Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
diff --git a/Documentation/devicetree/bindings/watchdog/dw_wdt.txt b/Documentation/devicetree/bindings/watchdog/dw_wdt.txt
deleted file mode 100644
index eb0914420c7c..000000000000
--- a/Documentation/devicetree/bindings/watchdog/dw_wdt.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Synopsys Designware Watchdog Timer
-
-Required Properties:
-
-- compatible : Should contain "snps,dw-wdt"
-- reg : Base address and size of the watchdog timer registers.
-- clocks : phandle + clock-specifier for the clock that drives the
- watchdog timer.
-
-Optional Properties:
-
-- interrupts : The interrupt used for the watchdog timeout warning.
-- resets : phandle pointing to the system reset controller with
- line index for the watchdog.
-
-Example:
-
- watchdog0: wd@ffd02000 {
- compatible = "snps,dw-wdt";
- reg = <0xffd02000 0x1000>;
- interrupts = <0 171 4>;
- clocks = <&per_base_clk>;
- resets = <&rst WDT0_RESET>;
- };
diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
new file mode 100644
index 000000000000..4f6944756ab4
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/snps,dw-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware Watchdog Timer
+
+allOf:
+ - $ref: "watchdog.yaml#"
+
+maintainers:
+ - Jamie Iles <jamie@jamieiles.com>
+
+properties:
+ compatible:
+ const: snps,dw-wdt
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: DW Watchdog pre-timeout interrupt
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Watchdog timer reference clock
+
+ resets:
+ description: Phandle to the DW Watchdog reset lane
+ maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+examples:
+ - |
+ watchdog@ffd02000 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd02000 0x1000>;
+ interrupts = <0 171 4>;
+ clocks = <&per_base_clk>;
+ resets = <&wdt_rst>;
+ };
+...
--
2.26.2
^ permalink raw reply related
* [PATCH v4 3/7] dt-bindings: watchdog: dw-wdt: Add watchdog TOPs array property
From: Serge Semin @ 2020-05-30 7:35 UTC (permalink / raw)
To: Wim Van Sebroeck, Guenter Roeck, Rob Herring
Cc: Serge Semin, Serge Semin, Rob Herring, Alexey Malahov,
Thomas Bogendoerfer, Arnd Bergmann, linux-mips, linux-watchdog,
devicetree, linux-kernel
In-Reply-To: <20200530073557.22661-1-Sergey.Semin@baikalelectronics.ru>
In case if DW Watchdog IP core is built with WDT_USE_FIX_TOP == false,
a custom timeout periods are used to preset the timer counter. In
this case that periods should be specified in a new "snps,watchdog-tops"
property of the DW watchdog dts node.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
---
Changelog v2:
- Rearrange SoBs.
- Move $ref to the root level of the "snps,watchdog-tops" property
so does the constraints.
- Add default TOP values array.
- Discard the label definition from the new bindings example.
Changelog v3:
- Remove items property and move the minItems and maxItems constraints to
the root level of the snps,watchdog-tops property.
---
.../bindings/watchdog/snps,dw-wdt.yaml | 32 +++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
index 5bf6dc6377f3..d9fc7bb851b1 100644
--- a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
@@ -39,6 +39,23 @@ properties:
description: Phandle to the DW Watchdog reset lane
maxItems: 1
+ snps,watchdog-tops:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ DW APB Watchdog custom timer intervals - Timeout Period ranges (TOPs).
+ Each TOP is a number loaded into the watchdog counter at the moment of
+ the timer restart. The counter decrementing happens each tick of the
+ reference clock. Therefore the TOPs array is equivalent to an array of
+ the timer expiration intervals supported by the DW APB Watchdog. Note
+ DW APB Watchdog IP-core might be synthesized with fixed TOP values,
+ in which case this property is unnecessary with default TOPs utilized.
+ default: [0x0001000 0x0002000 0x0004000 0x0008000
+ 0x0010000 0x0020000 0x0040000 0x0080000
+ 0x0100000 0x0200000 0x0400000 0x0800000
+ 0x1000000 0x2000000 0x4000000 0x8000000]
+ minItems: 16
+ maxItems: 16
+
unevaluatedProperties: false
required:
@@ -55,4 +72,19 @@ examples:
clocks = <&per_base_clk>;
resets = <&wdt_rst>;
};
+
+ - |
+ watchdog@ffd02000 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd02000 0x1000>;
+ interrupts = <0 171 4>;
+ clocks = <&per_base_clk>;
+ clock-names = "tclk";
+ snps,watchdog-tops = <0x000000FF 0x000001FF 0x000003FF
+ 0x000007FF 0x0000FFFF 0x0001FFFF
+ 0x0003FFFF 0x0007FFFF 0x000FFFFF
+ 0x001FFFFF 0x003FFFFF 0x007FFFFF
+ 0x00FFFFFF 0x01FFFFFF 0x03FFFFFF
+ 0x07FFFFFF>;
+ };
...
--
2.26.2
^ permalink raw reply related
* [PATCH v4 0/7] watchdog: dw_wdt: Take Baikal-T1 DW WDT peculiarities into account
From: Serge Semin @ 2020-05-30 7:35 UTC (permalink / raw)
To: Wim Van Sebroeck, Guenter Roeck
Cc: Serge Semin, Serge Semin, Alexey Malahov, Maxim Kaurkin,
Pavel Parkhomenko, Ramil Zaripov, Ekaterina Skachko, Vadim Vlasov,
Alexey Kolotnikov, Thomas Bogendoerfer, Arnd Bergmann,
Rob Herring, linux-mips, linux-watchdog, devicetree, linux-kernel
Merge window is upon us. Please review/merge in/whatever the rest of the
patches.
There were a few features enabled at the time of the Baikal-T1 SoC DW WDT
IP synthesis, which weren't taken into account in the DW WDT driver available
in the kernel. First of all the SoC engineers synthesized the watchdog core
with WDT_USE_FIX_TOP set to false (don't really know why, but they did).
Due to this the timer reset values weren't fixed as the driver expected
but were initialized with a pre-defined values selected by the engineers.
Secondly the driver expected that the watchdog APB bus and the timer had
synchronous reference clocks, while Baikal-T1 SoC DW WDT was created with
asynchronous ones. So the driver should enable two clock devices: APB bus
clocks and a separate timer reference clock. Finally DW Watchdog Timer is
capable of generating a pre-timeout interrupt if corresponding config is
enabled. The problem was that the pre-timeout IRQ happens when the set
timeout elapses, while the actual WDT expiration and subsequent reboot take
place in the next timeout. This makes the pre-timeout functionality
implementation a bit tricky, since in this case we would have to find a
WDT timeout twice smaller the requested timeout. All of the changes described
above are provided by the patches in this patchset.
In addition traditionally we replaced the legacy plain text-based dt-binding
file with yaml-based one and added the controller registers dump DebugFS node
to ease the driver debug procedure.
This patchset is rebased and tested on the mainline Linux kernel 5.6-rc4:
base-commit: 0e698dfa2822 ("Linux 5.7-rc4")
tag: v5.7-rc4
Changelog v2:
- Rearrange SoBs.
- Discard BE copyright header from the binding file.
- Replace "additionalProperties: false" with "unevaluatedProperties: false"
property in the binding.
- Move the APB3 clocks support declared in the dt binding file into a
dedicated patch.
- Move $ref to the root level of the "snps,watchdog-tops" property
so does the constraints.
- Make Pre-timeout IRQs support being optional.
- Add "ms" suffix to the methods returning msec and convert the methods
with no "ms" suffix to return a timeout in sec.
- Make sure minimum timeout is at least 1 sec.
- Refactor the timeouts calculation procedure to to retain the timeouts in
the ascending order.
- Make sure there is no integer overflow in milliseconds calculation. It
is saved in a dedicated uint field of the timeout structure.
- Discard timeout/pretimeout/ping/enable DebugFS nodes. Registers state
dump node is only left.
Link: https://lore.kernel.org/linux-watchdog/20200510105807.880-1-Sergey.Semin@baikalelectronics.ru/
Changelog v3:
- Add Rob's Reviewed-by tag to the DT-related patches.
- Remove items from the "snps,watchdog-tops" property and move the
minItems and maxItems constraints to the root level of it.
Link: https://lore.kernel.org/linux-watchdog/20200526154123.24402-1-Sergey.Semin@baikalelectronics.ru
Changelog v4:
- Add Guenter's Reviewed-by tags.
- IRQ > 0 is only valid in Linux so make sure we request IRQ only if valid
number is returned from platform_get_irq_optional().
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Maxim Kaurkin <Maxim.Kaurkin@baikalelectronics.ru>
Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Ekaterina Skachko <Ekaterina.Skachko@baikalelectronics.ru>
Cc: Vadim Vlasov <V.Vlasov@baikalelectronics.ru>
Cc: Alexey Kolotnikov <Alexey.Kolotnikov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Serge Semin (7):
dt-bindings: watchdog: Convert DW WDT binding to DT schema
dt-bindings: watchdog: dw-wdt: Support devices with asynch clocks
dt-bindings: watchdog: dw-wdt: Add watchdog TOPs array property
watchdog: dw_wdt: Support devices with non-fixed TOP values
watchdog: dw_wdt: Support devices with asynch clocks
watchdog: dw_wdt: Add pre-timeouts support
watchdog: dw_wdt: Add DebugFS files
.../devicetree/bindings/watchdog/dw_wdt.txt | 24 -
.../bindings/watchdog/snps,dw-wdt.yaml | 90 ++++
drivers/watchdog/dw_wdt.c | 437 ++++++++++++++++--
3 files changed, 494 insertions(+), 57 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/watchdog/dw_wdt.txt
create mode 100644 Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
--
2.26.2
^ permalink raw reply
* [PATCH v4 5/7] watchdog: dw_wdt: Support devices with asynch clocks
From: Serge Semin @ 2020-05-30 7:35 UTC (permalink / raw)
To: Wim Van Sebroeck, Guenter Roeck
Cc: Serge Semin, Serge Semin, Alexey Malahov, Thomas Bogendoerfer,
Arnd Bergmann, Rob Herring, linux-mips, devicetree,
linux-watchdog, linux-kernel
In-Reply-To: <20200530073557.22661-1-Sergey.Semin@baikalelectronics.ru>
DW Watchdog IP core can be synthesised with asynchronous timer/APB
clocks support (WDT_ASYNC_CLK_MODE_ENABLE == 1). In this case
separate clock signals are supposed to be used to feed watchdog timer
and APB interface of the device. Currently the driver supports
the synchronous mode only. Since there is no way to determine which
mode was actually activated for device from its registers, we have to
rely on the platform device configuration data. If optional "pclk"
clock source is supplied, we consider the device working in asynchronous
mode, otherwise the driver falls back to the synchronous configuration.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
---
Changelog v2:
- Rearrange SoBs.
---
drivers/watchdog/dw_wdt.c | 48 +++++++++++++++++++++++++++++++++++----
1 file changed, 43 insertions(+), 5 deletions(-)
diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c
index 693c0d1fd796..efbc36872670 100644
--- a/drivers/watchdog/dw_wdt.c
+++ b/drivers/watchdog/dw_wdt.c
@@ -68,6 +68,7 @@ struct dw_wdt_timeout {
struct dw_wdt {
void __iomem *regs;
struct clk *clk;
+ struct clk *pclk;
unsigned long rate;
struct dw_wdt_timeout timeouts[DW_WDT_NUM_TOPS];
struct watchdog_device wdd;
@@ -274,6 +275,7 @@ static int dw_wdt_suspend(struct device *dev)
dw_wdt->control = readl(dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
dw_wdt->timeout = readl(dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
+ clk_disable_unprepare(dw_wdt->pclk);
clk_disable_unprepare(dw_wdt->clk);
return 0;
@@ -287,6 +289,12 @@ static int dw_wdt_resume(struct device *dev)
if (err)
return err;
+ err = clk_prepare_enable(dw_wdt->pclk);
+ if (err) {
+ clk_disable_unprepare(dw_wdt->clk);
+ return err;
+ }
+
writel(dw_wdt->timeout, dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
writel(dw_wdt->control, dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
@@ -393,9 +401,18 @@ static int dw_wdt_drv_probe(struct platform_device *pdev)
if (IS_ERR(dw_wdt->regs))
return PTR_ERR(dw_wdt->regs);
- dw_wdt->clk = devm_clk_get(dev, NULL);
- if (IS_ERR(dw_wdt->clk))
- return PTR_ERR(dw_wdt->clk);
+ /*
+ * Try to request the watchdog dedicated timer clock source. It must
+ * be supplied if asynchronous mode is enabled. Otherwise fallback
+ * to the common timer/bus clocks configuration, in which the very
+ * first found clock supply both timer and APB signals.
+ */
+ dw_wdt->clk = devm_clk_get(dev, "tclk");
+ if (IS_ERR(dw_wdt->clk)) {
+ dw_wdt->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(dw_wdt->clk))
+ return PTR_ERR(dw_wdt->clk);
+ }
ret = clk_prepare_enable(dw_wdt->clk);
if (ret)
@@ -407,10 +424,27 @@ static int dw_wdt_drv_probe(struct platform_device *pdev)
goto out_disable_clk;
}
+ /*
+ * Request APB clock if device is configured with async clocks mode.
+ * In this case both tclk and pclk clocks are supposed to be specified.
+ * Alas we can't know for sure whether async mode was really activated,
+ * so the pclk phandle reference is left optional. If it couldn't be
+ * found we consider the device configured in synchronous clocks mode.
+ */
+ dw_wdt->pclk = devm_clk_get_optional(dev, "pclk");
+ if (IS_ERR(dw_wdt->pclk)) {
+ ret = PTR_ERR(dw_wdt->pclk);
+ goto out_disable_clk;
+ }
+
+ ret = clk_prepare_enable(dw_wdt->pclk);
+ if (ret)
+ goto out_disable_clk;
+
dw_wdt->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
if (IS_ERR(dw_wdt->rst)) {
ret = PTR_ERR(dw_wdt->rst);
- goto out_disable_clk;
+ goto out_disable_pclk;
}
reset_control_deassert(dw_wdt->rst);
@@ -449,10 +483,13 @@ static int dw_wdt_drv_probe(struct platform_device *pdev)
ret = watchdog_register_device(wdd);
if (ret)
- goto out_disable_clk;
+ goto out_disable_pclk;
return 0;
+out_disable_pclk:
+ clk_disable_unprepare(dw_wdt->pclk);
+
out_disable_clk:
clk_disable_unprepare(dw_wdt->clk);
return ret;
@@ -464,6 +501,7 @@ static int dw_wdt_drv_remove(struct platform_device *pdev)
watchdog_unregister_device(&dw_wdt->wdd);
reset_control_assert(dw_wdt->rst);
+ clk_disable_unprepare(dw_wdt->pclk);
clk_disable_unprepare(dw_wdt->clk);
return 0;
--
2.26.2
^ permalink raw reply related
* [PATCH v4 4/7] watchdog: dw_wdt: Support devices with non-fixed TOP values
From: Serge Semin @ 2020-05-30 7:35 UTC (permalink / raw)
To: Wim Van Sebroeck, Guenter Roeck
Cc: Serge Semin, Serge Semin, Alexey Malahov, Thomas Bogendoerfer,
Arnd Bergmann, Rob Herring, linux-mips, devicetree,
linux-watchdog, linux-kernel
In-Reply-To: <20200530073557.22661-1-Sergey.Semin@baikalelectronics.ru>
In case if the DW Watchdog IP core is synthesised with
WDT_USE_FIX_TOP == false, the TOP interval indexes make the device
to load a custom periods to the counter. These periods are hardwired
at the IP synthesis stage and can be within [2^8, 2^(WDT_CNT_WIDTH - 1)].
Alas their values can't be detected at runtime and must be somehow
supplied to the driver so one could properly determine the watchdog
timeout intervals. For this purpose we suggest to have a vendor-
specific dts property "snps,watchdog-tops" utilized, which would
provide an array of sixteen counter values. At device probe stage they
will be used to initialize the watchdog device timeouts determined
from the array values and current clocks source rate.
In order to have custom TOP values supported the driver must be
altered in the following way. First of all the fixed-top values
ready-to-use array must be determined for compatibility with currently
supported devices, which were synthesised with WDT_USE_FIX_TOP == true.
It will be used if either fixed TOP feature is detected being enabled or
no custom TOPs are fetched from the device dt node. Secondly at the probe
stage we must initialize an array of the watchdog timeouts corresponding
to the detected TOPs list and the reference clock rate. For generality the
procedure of initialization is designed in a way to support the TOPs array
with no limitations on the items order or value. Finally the watchdog
period search methods should be altered to support the new timeouts data
structure.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
---
Changelog v2:
- Rearrange SoBs.
- Add "ms" suffix to the methods returning msec and convert the methods
with no "ms" suffix to return a timeout in sec.
- Make sure minimum timeout is at least 1 sec.
- Refactor the timeouts calculation procedure to retain the timeouts in
the ascending order.
- Make sure there is no integer overflow in milliseconds calculation. It
is saved in a dedicated uint field of the timeout structure.
---
drivers/watchdog/dw_wdt.c | 191 +++++++++++++++++++++++++++++++++-----
1 file changed, 167 insertions(+), 24 deletions(-)
diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c
index fba21de2bbad..693c0d1fd796 100644
--- a/drivers/watchdog/dw_wdt.c
+++ b/drivers/watchdog/dw_wdt.c
@@ -13,6 +13,8 @@
*/
#include <linux/bitops.h>
+#include <linux/limits.h>
+#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
@@ -34,21 +36,40 @@
#define WDOG_CURRENT_COUNT_REG_OFFSET 0x08
#define WDOG_COUNTER_RESTART_REG_OFFSET 0x0c
#define WDOG_COUNTER_RESTART_KICK_VALUE 0x76
+#define WDOG_COMP_PARAMS_1_REG_OFFSET 0xf4
+#define WDOG_COMP_PARAMS_1_USE_FIX_TOP BIT(6)
-/* The maximum TOP (timeout period) value that can be set in the watchdog. */
-#define DW_WDT_MAX_TOP 15
+/* There are sixteen TOPs (timeout periods) that can be set in the watchdog. */
+#define DW_WDT_NUM_TOPS 16
+#define DW_WDT_FIX_TOP(_idx) (1U << (16 + _idx))
#define DW_WDT_DEFAULT_SECONDS 30
+static const u32 dw_wdt_fix_tops[DW_WDT_NUM_TOPS] = {
+ DW_WDT_FIX_TOP(0), DW_WDT_FIX_TOP(1), DW_WDT_FIX_TOP(2),
+ DW_WDT_FIX_TOP(3), DW_WDT_FIX_TOP(4), DW_WDT_FIX_TOP(5),
+ DW_WDT_FIX_TOP(6), DW_WDT_FIX_TOP(7), DW_WDT_FIX_TOP(8),
+ DW_WDT_FIX_TOP(9), DW_WDT_FIX_TOP(10), DW_WDT_FIX_TOP(11),
+ DW_WDT_FIX_TOP(12), DW_WDT_FIX_TOP(13), DW_WDT_FIX_TOP(14),
+ DW_WDT_FIX_TOP(15)
+};
+
static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+struct dw_wdt_timeout {
+ u32 top_val;
+ unsigned int sec;
+ unsigned int msec;
+};
+
struct dw_wdt {
void __iomem *regs;
struct clk *clk;
unsigned long rate;
+ struct dw_wdt_timeout timeouts[DW_WDT_NUM_TOPS];
struct watchdog_device wdd;
struct reset_control *rst;
/* Save/restore */
@@ -64,20 +85,66 @@ static inline int dw_wdt_is_enabled(struct dw_wdt *dw_wdt)
WDOG_CONTROL_REG_WDT_EN_MASK;
}
-static inline int dw_wdt_top_in_seconds(struct dw_wdt *dw_wdt, unsigned top)
+static unsigned int dw_wdt_find_best_top(struct dw_wdt *dw_wdt,
+ unsigned int timeout, u32 *top_val)
{
+ int idx;
+
/*
- * There are 16 possible timeout values in 0..15 where the number of
- * cycles is 2 ^ (16 + i) and the watchdog counts down.
+ * Find a TOP with timeout greater or equal to the requested number.
+ * Note we'll select a TOP with maximum timeout if the requested
+ * timeout couldn't be reached.
*/
- return (1U << (16 + top)) / dw_wdt->rate;
+ for (idx = 0; idx < DW_WDT_NUM_TOPS; ++idx) {
+ if (dw_wdt->timeouts[idx].sec >= timeout)
+ break;
+ }
+
+ if (idx == DW_WDT_NUM_TOPS)
+ --idx;
+
+ *top_val = dw_wdt->timeouts[idx].top_val;
+
+ return dw_wdt->timeouts[idx].sec;
}
-static int dw_wdt_get_top(struct dw_wdt *dw_wdt)
+static unsigned int dw_wdt_get_min_timeout(struct dw_wdt *dw_wdt)
{
- int top = readl(dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET) & 0xF;
+ int idx;
+
+ /*
+ * We'll find a timeout greater or equal to one second anyway because
+ * the driver probe would have failed if there was none.
+ */
+ for (idx = 0; idx < DW_WDT_NUM_TOPS; ++idx) {
+ if (dw_wdt->timeouts[idx].sec)
+ break;
+ }
- return dw_wdt_top_in_seconds(dw_wdt, top);
+ return dw_wdt->timeouts[idx].sec;
+}
+
+static unsigned int dw_wdt_get_max_timeout_ms(struct dw_wdt *dw_wdt)
+{
+ struct dw_wdt_timeout *timeout = &dw_wdt->timeouts[DW_WDT_NUM_TOPS - 1];
+ u64 msec;
+
+ msec = (u64)timeout->sec * MSEC_PER_SEC + timeout->msec;
+
+ return msec < UINT_MAX ? msec : UINT_MAX;
+}
+
+static unsigned int dw_wdt_get_timeout(struct dw_wdt *dw_wdt)
+{
+ int top_val = readl(dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET) & 0xF;
+ int idx;
+
+ for (idx = 0; idx < DW_WDT_NUM_TOPS; ++idx) {
+ if (dw_wdt->timeouts[idx].top_val == top_val)
+ break;
+ }
+
+ return dw_wdt->timeouts[idx].sec;
}
static int dw_wdt_ping(struct watchdog_device *wdd)
@@ -93,17 +160,10 @@ static int dw_wdt_ping(struct watchdog_device *wdd)
static int dw_wdt_set_timeout(struct watchdog_device *wdd, unsigned int top_s)
{
struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
- int i, top_val = DW_WDT_MAX_TOP;
+ unsigned int timeout;
+ u32 top_val;
- /*
- * Iterate over the timeout values until we find the closest match. We
- * always look for >=.
- */
- for (i = 0; i <= DW_WDT_MAX_TOP; ++i)
- if (dw_wdt_top_in_seconds(dw_wdt, i) >= top_s) {
- top_val = i;
- break;
- }
+ timeout = dw_wdt_find_best_top(dw_wdt, top_s, &top_val);
/*
* Set the new value in the watchdog. Some versions of dw_wdt
@@ -120,7 +180,7 @@ static int dw_wdt_set_timeout(struct watchdog_device *wdd, unsigned int top_s)
* wdd->max_hw_heartbeat_ms
*/
if (top_s * 1000 <= wdd->max_hw_heartbeat_ms)
- wdd->timeout = dw_wdt_top_in_seconds(dw_wdt, top_val);
+ wdd->timeout = timeout;
else
wdd->timeout = top_s;
@@ -238,6 +298,86 @@ static int dw_wdt_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(dw_wdt_pm_ops, dw_wdt_suspend, dw_wdt_resume);
+/*
+ * In case if DW WDT IP core is synthesized with fixed TOP feature disabled the
+ * TOPs array can be arbitrary ordered with nearly any sixteen uint numbers
+ * depending on the system engineer imagination. The next method handles the
+ * passed TOPs array to pre-calculate the effective timeouts and to sort the
+ * TOP items out in the ascending order with respect to the timeouts.
+ */
+
+static void dw_wdt_handle_tops(struct dw_wdt *dw_wdt, const u32 *tops)
+{
+ struct dw_wdt_timeout tout, *dst;
+ int val, tidx;
+ u64 msec;
+
+ /*
+ * We walk over the passed TOPs array and calculate corresponding
+ * timeouts in seconds and milliseconds. The milliseconds granularity
+ * is needed to distinguish the TOPs with very close timeouts and to
+ * set the watchdog max heartbeat setting further.
+ */
+ for (val = 0; val < DW_WDT_NUM_TOPS; ++val) {
+ tout.top_val = val;
+ tout.sec = tops[val] / dw_wdt->rate;
+ msec = (u64)tops[val] * MSEC_PER_SEC;
+ do_div(msec, dw_wdt->rate);
+ tout.msec = msec - ((u64)tout.sec * MSEC_PER_SEC);
+
+ /*
+ * Find a suitable place for the current TOP in the timeouts
+ * array so that the list is remained in the ascending order.
+ */
+ for (tidx = 0; tidx < val; ++tidx) {
+ dst = &dw_wdt->timeouts[tidx];
+ if (tout.sec > dst->sec || (tout.sec == dst->sec &&
+ tout.msec >= dst->msec))
+ continue;
+ else
+ swap(*dst, tout);
+ }
+
+ dw_wdt->timeouts[val] = tout;
+ }
+}
+
+static int dw_wdt_init_timeouts(struct dw_wdt *dw_wdt, struct device *dev)
+{
+ u32 data, of_tops[DW_WDT_NUM_TOPS];
+ const u32 *tops;
+ int ret;
+
+ /*
+ * Retrieve custom or fixed counter values depending on the
+ * WDT_USE_FIX_TOP flag found in the component specific parameters
+ * #1 register.
+ */
+ data = readl(dw_wdt->regs + WDOG_COMP_PARAMS_1_REG_OFFSET);
+ if (data & WDOG_COMP_PARAMS_1_USE_FIX_TOP) {
+ tops = dw_wdt_fix_tops;
+ } else {
+ ret = of_property_read_variable_u32_array(dev_of_node(dev),
+ "snps,watchdog-tops", of_tops, DW_WDT_NUM_TOPS,
+ DW_WDT_NUM_TOPS);
+ if (ret < 0) {
+ dev_warn(dev, "No valid TOPs array specified\n");
+ tops = dw_wdt_fix_tops;
+ } else {
+ tops = of_tops;
+ }
+ }
+
+ /* Convert the specified TOPs into an array of watchdog timeouts. */
+ dw_wdt_handle_tops(dw_wdt, tops);
+ if (!dw_wdt->timeouts[DW_WDT_NUM_TOPS - 1].sec) {
+ dev_err(dev, "No any valid TOP detected\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int dw_wdt_drv_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -275,12 +415,15 @@ static int dw_wdt_drv_probe(struct platform_device *pdev)
reset_control_deassert(dw_wdt->rst);
+ ret = dw_wdt_init_timeouts(dw_wdt, dev);
+ if (ret)
+ goto out_disable_clk;
+
wdd = &dw_wdt->wdd;
wdd->info = &dw_wdt_ident;
wdd->ops = &dw_wdt_ops;
- wdd->min_timeout = 1;
- wdd->max_hw_heartbeat_ms =
- dw_wdt_top_in_seconds(dw_wdt, DW_WDT_MAX_TOP) * 1000;
+ wdd->min_timeout = dw_wdt_get_min_timeout(dw_wdt);
+ wdd->max_hw_heartbeat_ms = dw_wdt_get_max_timeout_ms(dw_wdt);
wdd->parent = dev;
watchdog_set_drvdata(wdd, dw_wdt);
@@ -293,7 +436,7 @@ static int dw_wdt_drv_probe(struct platform_device *pdev)
* devicetree.
*/
if (dw_wdt_is_enabled(dw_wdt)) {
- wdd->timeout = dw_wdt_get_top(dw_wdt);
+ wdd->timeout = dw_wdt_get_timeout(dw_wdt);
set_bit(WDOG_HW_RUNNING, &wdd->status);
} else {
wdd->timeout = DW_WDT_DEFAULT_SECONDS;
--
2.26.2
^ permalink raw reply related
* [PATCH v4 6/7] watchdog: dw_wdt: Add pre-timeouts support
From: Serge Semin @ 2020-05-30 7:35 UTC (permalink / raw)
To: Wim Van Sebroeck, Guenter Roeck
Cc: Serge Semin, Serge Semin, Alexey Malahov, Thomas Bogendoerfer,
Arnd Bergmann, Rob Herring, linux-mips, devicetree,
linux-watchdog, linux-kernel
In-Reply-To: <20200530073557.22661-1-Sergey.Semin@baikalelectronics.ru>
DW Watchdog can rise an interrupt in case if IRQ request mode is enabled
and timer reaches the zero value. In this case the IRQ lane is left
pending until either the next watchdog kick event (watchdog restart) or
until the WDT_EOI register is read or the device/system reset. This
interface can be used to implement the pre-timeout functionality
optionally provided by the Linux kernel watchdog devices.
IRQ mode provides a two stages timeout interface. It means the IRQ is
raised when the counter reaches zero, while the system reset occurs only
after subsequent timeout if the timer restart is not performed. Due to
this peculiarity the pre-timeout value is actually set to the achieved
hardware timeout, while the real watchdog timeout is considered to be
twice as much of it. This applies a significant limitation on the
pre-timeout values, so current implementation supports either zero value,
which disables the pre-timeout events, or non-zero values, which imply
the pre-timeout to be at least half of the current watchdog timeout.
Note that we ask the interrupt controller to detect the rising-edge
pre-timeout interrupts to prevent the high-level-IRQs flood, since
if the pre-timeout happens, the IRQ lane will be left pending until
it's cleared by the timer restart.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
---
Changelog v2:
- Rearrange SoBs.
- Make the Pre-timeout IRQ being optionally supported.
Changelog v4:
- Linux IRQ > 0 is only valid so make sure we request IRQ only if valid
number is returned from platform_get_irq_optional().
---
drivers/watchdog/dw_wdt.c | 138 +++++++++++++++++++++++++++++++++++---
1 file changed, 130 insertions(+), 8 deletions(-)
diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c
index efbc36872670..7a171920dd21 100644
--- a/drivers/watchdog/dw_wdt.c
+++ b/drivers/watchdog/dw_wdt.c
@@ -22,6 +22,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
@@ -36,6 +37,8 @@
#define WDOG_CURRENT_COUNT_REG_OFFSET 0x08
#define WDOG_COUNTER_RESTART_REG_OFFSET 0x0c
#define WDOG_COUNTER_RESTART_KICK_VALUE 0x76
+#define WDOG_INTERRUPT_STATUS_REG_OFFSET 0x10
+#define WDOG_INTERRUPT_CLEAR_REG_OFFSET 0x14
#define WDOG_COMP_PARAMS_1_REG_OFFSET 0xf4
#define WDOG_COMP_PARAMS_1_USE_FIX_TOP BIT(6)
@@ -59,6 +62,11 @@ module_param(nowayout, bool, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+enum dw_wdt_rmod {
+ DW_WDT_RMOD_RESET = 1,
+ DW_WDT_RMOD_IRQ = 2
+};
+
struct dw_wdt_timeout {
u32 top_val;
unsigned int sec;
@@ -70,6 +78,7 @@ struct dw_wdt {
struct clk *clk;
struct clk *pclk;
unsigned long rate;
+ enum dw_wdt_rmod rmod;
struct dw_wdt_timeout timeouts[DW_WDT_NUM_TOPS];
struct watchdog_device wdd;
struct reset_control *rst;
@@ -86,6 +95,20 @@ static inline int dw_wdt_is_enabled(struct dw_wdt *dw_wdt)
WDOG_CONTROL_REG_WDT_EN_MASK;
}
+static void dw_wdt_update_mode(struct dw_wdt *dw_wdt, enum dw_wdt_rmod rmod)
+{
+ u32 val;
+
+ val = readl(dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
+ if (rmod == DW_WDT_RMOD_IRQ)
+ val |= WDOG_CONTROL_REG_RESP_MODE_MASK;
+ else
+ val &= ~WDOG_CONTROL_REG_RESP_MODE_MASK;
+ writel(val, dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
+
+ dw_wdt->rmod = rmod;
+}
+
static unsigned int dw_wdt_find_best_top(struct dw_wdt *dw_wdt,
unsigned int timeout, u32 *top_val)
{
@@ -145,7 +168,11 @@ static unsigned int dw_wdt_get_timeout(struct dw_wdt *dw_wdt)
break;
}
- return dw_wdt->timeouts[idx].sec;
+ /*
+ * In IRQ mode due to the two stages counter, the actual timeout is
+ * twice greater than the TOP setting.
+ */
+ return dw_wdt->timeouts[idx].sec * dw_wdt->rmod;
}
static int dw_wdt_ping(struct watchdog_device *wdd)
@@ -164,7 +191,20 @@ static int dw_wdt_set_timeout(struct watchdog_device *wdd, unsigned int top_s)
unsigned int timeout;
u32 top_val;
- timeout = dw_wdt_find_best_top(dw_wdt, top_s, &top_val);
+ /*
+ * Note IRQ mode being enabled means having a non-zero pre-timeout
+ * setup. In this case we try to find a TOP as close to the half of the
+ * requested timeout as possible since DW Watchdog IRQ mode is designed
+ * in two stages way - first timeout rises the pre-timeout interrupt,
+ * second timeout performs the system reset. So basically the effective
+ * watchdog-caused reset happens after two watchdog TOPs elapsed.
+ */
+ timeout = dw_wdt_find_best_top(dw_wdt, DIV_ROUND_UP(top_s, dw_wdt->rmod),
+ &top_val);
+ if (dw_wdt->rmod == DW_WDT_RMOD_IRQ)
+ wdd->pretimeout = timeout;
+ else
+ wdd->pretimeout = 0;
/*
* Set the new value in the watchdog. Some versions of dw_wdt
@@ -175,25 +215,47 @@ static int dw_wdt_set_timeout(struct watchdog_device *wdd, unsigned int top_s)
writel(top_val | top_val << WDOG_TIMEOUT_RANGE_TOPINIT_SHIFT,
dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
+ /* Kick new TOP value into the watchdog counter if activated. */
+ if (watchdog_active(wdd))
+ dw_wdt_ping(wdd);
+
/*
* In case users set bigger timeout value than HW can support,
* kernel(watchdog_dev.c) helps to feed watchdog before
* wdd->max_hw_heartbeat_ms
*/
if (top_s * 1000 <= wdd->max_hw_heartbeat_ms)
- wdd->timeout = timeout;
+ wdd->timeout = timeout * dw_wdt->rmod;
else
wdd->timeout = top_s;
return 0;
}
+static int dw_wdt_set_pretimeout(struct watchdog_device *wdd, unsigned int req)
+{
+ struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
+
+ /*
+ * We ignore actual value of the timeout passed from user-space
+ * using it as a flag whether the pretimeout functionality is intended
+ * to be activated.
+ */
+ dw_wdt_update_mode(dw_wdt, req ? DW_WDT_RMOD_IRQ : DW_WDT_RMOD_RESET);
+ dw_wdt_set_timeout(wdd, wdd->timeout);
+
+ return 0;
+}
+
static void dw_wdt_arm_system_reset(struct dw_wdt *dw_wdt)
{
u32 val = readl(dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
- /* Disable interrupt mode; always perform system reset. */
- val &= ~WDOG_CONTROL_REG_RESP_MODE_MASK;
+ /* Disable/enable interrupt mode depending on the RMOD flag. */
+ if (dw_wdt->rmod == DW_WDT_RMOD_IRQ)
+ val |= WDOG_CONTROL_REG_RESP_MODE_MASK;
+ else
+ val &= ~WDOG_CONTROL_REG_RESP_MODE_MASK;
/* Enable watchdog. */
val |= WDOG_CONTROL_REG_WDT_EN_MASK;
writel(val, dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
@@ -231,6 +293,7 @@ static int dw_wdt_restart(struct watchdog_device *wdd,
struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
writel(0, dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
+ dw_wdt_update_mode(dw_wdt, DW_WDT_RMOD_RESET);
if (dw_wdt_is_enabled(dw_wdt))
writel(WDOG_COUNTER_RESTART_KICK_VALUE,
dw_wdt->regs + WDOG_COUNTER_RESTART_REG_OFFSET);
@@ -246,9 +309,19 @@ static int dw_wdt_restart(struct watchdog_device *wdd,
static unsigned int dw_wdt_get_timeleft(struct watchdog_device *wdd)
{
struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
+ unsigned int sec;
+ u32 val;
+
+ val = readl(dw_wdt->regs + WDOG_CURRENT_COUNT_REG_OFFSET);
+ sec = val / dw_wdt->rate;
- return readl(dw_wdt->regs + WDOG_CURRENT_COUNT_REG_OFFSET) /
- dw_wdt->rate;
+ if (dw_wdt->rmod == DW_WDT_RMOD_IRQ) {
+ val = readl(dw_wdt->regs + WDOG_INTERRUPT_STATUS_REG_OFFSET);
+ if (!val)
+ sec += wdd->pretimeout;
+ }
+
+ return sec;
}
static const struct watchdog_info dw_wdt_ident = {
@@ -257,16 +330,41 @@ static const struct watchdog_info dw_wdt_ident = {
.identity = "Synopsys DesignWare Watchdog",
};
+static const struct watchdog_info dw_wdt_pt_ident = {
+ .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+ WDIOF_PRETIMEOUT | WDIOF_MAGICCLOSE,
+ .identity = "Synopsys DesignWare Watchdog",
+};
+
static const struct watchdog_ops dw_wdt_ops = {
.owner = THIS_MODULE,
.start = dw_wdt_start,
.stop = dw_wdt_stop,
.ping = dw_wdt_ping,
.set_timeout = dw_wdt_set_timeout,
+ .set_pretimeout = dw_wdt_set_pretimeout,
.get_timeleft = dw_wdt_get_timeleft,
.restart = dw_wdt_restart,
};
+static irqreturn_t dw_wdt_irq(int irq, void *devid)
+{
+ struct dw_wdt *dw_wdt = devid;
+ u32 val;
+
+ /*
+ * We don't clear the IRQ status. It's supposed to be done by the
+ * following ping operations.
+ */
+ val = readl(dw_wdt->regs + WDOG_INTERRUPT_STATUS_REG_OFFSET);
+ if (!val)
+ return IRQ_NONE;
+
+ watchdog_notify_pretimeout(&dw_wdt->wdd);
+
+ return IRQ_HANDLED;
+}
+
#ifdef CONFIG_PM_SLEEP
static int dw_wdt_suspend(struct device *dev)
{
@@ -447,6 +545,31 @@ static int dw_wdt_drv_probe(struct platform_device *pdev)
goto out_disable_pclk;
}
+ /* Enable normal reset without pre-timeout by default. */
+ dw_wdt_update_mode(dw_wdt, DW_WDT_RMOD_RESET);
+
+ /*
+ * Pre-timeout IRQ is optional, since some hardware may lack support
+ * of it. Note we must request rising-edge IRQ, since the lane is left
+ * pending either until the next watchdog kick event or up to the
+ * system reset.
+ */
+ ret = platform_get_irq_optional(pdev, 0);
+ if (ret > 0) {
+ ret = devm_request_irq(dev, ret, dw_wdt_irq,
+ IRQF_SHARED | IRQF_TRIGGER_RISING,
+ pdev->name, dw_wdt);
+ if (ret)
+ goto out_disable_pclk;
+
+ dw_wdt->wdd.info = &dw_wdt_pt_ident;
+ } else {
+ if (ret == -EPROBE_DEFER)
+ goto out_disable_pclk;
+
+ dw_wdt->wdd.info = &dw_wdt_ident;
+ }
+
reset_control_deassert(dw_wdt->rst);
ret = dw_wdt_init_timeouts(dw_wdt, dev);
@@ -454,7 +577,6 @@ static int dw_wdt_drv_probe(struct platform_device *pdev)
goto out_disable_clk;
wdd = &dw_wdt->wdd;
- wdd->info = &dw_wdt_ident;
wdd->ops = &dw_wdt_ops;
wdd->min_timeout = dw_wdt_get_min_timeout(dw_wdt);
wdd->max_hw_heartbeat_ms = dw_wdt_get_max_timeout_ms(dw_wdt);
--
2.26.2
^ permalink raw reply related
* [PATCH v4 7/7] watchdog: dw_wdt: Add DebugFS files
From: Serge Semin @ 2020-05-30 7:35 UTC (permalink / raw)
To: Wim Van Sebroeck, Guenter Roeck
Cc: Serge Semin, Serge Semin, Alexey Malahov, Thomas Bogendoerfer,
Arnd Bergmann, Rob Herring, linux-mips, devicetree,
linux-watchdog, linux-kernel
In-Reply-To: <20200530073557.22661-1-Sergey.Semin@baikalelectronics.ru>
For the sake of the easier device-driver debug procedure, we added a
DebugFS file with the controller registers state. It's available only if
kernel is configured with DebugFS support.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
---
Changelog v2:
- Rearrange SoBs.
- Discard timeout/pretimeout/ping/enable DebugFS nodes. Registers state
dump node is only left.
---
drivers/watchdog/dw_wdt.c | 68 +++++++++++++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)
diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c
index 7a171920dd21..4fec2c6a3c01 100644
--- a/drivers/watchdog/dw_wdt.c
+++ b/drivers/watchdog/dw_wdt.c
@@ -28,6 +28,7 @@
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/watchdog.h>
+#include <linux/debugfs.h>
#define WDOG_CONTROL_REG_OFFSET 0x00
#define WDOG_CONTROL_REG_WDT_EN_MASK 0x01
@@ -39,8 +40,14 @@
#define WDOG_COUNTER_RESTART_KICK_VALUE 0x76
#define WDOG_INTERRUPT_STATUS_REG_OFFSET 0x10
#define WDOG_INTERRUPT_CLEAR_REG_OFFSET 0x14
+#define WDOG_COMP_PARAMS_5_REG_OFFSET 0xe4
+#define WDOG_COMP_PARAMS_4_REG_OFFSET 0xe8
+#define WDOG_COMP_PARAMS_3_REG_OFFSET 0xec
+#define WDOG_COMP_PARAMS_2_REG_OFFSET 0xf0
#define WDOG_COMP_PARAMS_1_REG_OFFSET 0xf4
#define WDOG_COMP_PARAMS_1_USE_FIX_TOP BIT(6)
+#define WDOG_COMP_VERSION_REG_OFFSET 0xf8
+#define WDOG_COMP_TYPE_REG_OFFSET 0xfc
/* There are sixteen TOPs (timeout periods) that can be set in the watchdog. */
#define DW_WDT_NUM_TOPS 16
@@ -85,6 +92,10 @@ struct dw_wdt {
/* Save/restore */
u32 control;
u32 timeout;
+
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *dbgfs_dir;
+#endif
};
#define to_dw_wdt(wdd) container_of(wdd, struct dw_wdt, wdd)
@@ -484,6 +495,59 @@ static int dw_wdt_init_timeouts(struct dw_wdt *dw_wdt, struct device *dev)
return 0;
}
+#ifdef CONFIG_DEBUG_FS
+
+#define DW_WDT_DBGFS_REG(_name, _off) \
+{ \
+ .name = _name, \
+ .offset = _off \
+}
+
+static const struct debugfs_reg32 dw_wdt_dbgfs_regs[] = {
+ DW_WDT_DBGFS_REG("cr", WDOG_CONTROL_REG_OFFSET),
+ DW_WDT_DBGFS_REG("torr", WDOG_TIMEOUT_RANGE_REG_OFFSET),
+ DW_WDT_DBGFS_REG("ccvr", WDOG_CURRENT_COUNT_REG_OFFSET),
+ DW_WDT_DBGFS_REG("crr", WDOG_COUNTER_RESTART_REG_OFFSET),
+ DW_WDT_DBGFS_REG("stat", WDOG_INTERRUPT_STATUS_REG_OFFSET),
+ DW_WDT_DBGFS_REG("param5", WDOG_COMP_PARAMS_5_REG_OFFSET),
+ DW_WDT_DBGFS_REG("param4", WDOG_COMP_PARAMS_4_REG_OFFSET),
+ DW_WDT_DBGFS_REG("param3", WDOG_COMP_PARAMS_3_REG_OFFSET),
+ DW_WDT_DBGFS_REG("param2", WDOG_COMP_PARAMS_2_REG_OFFSET),
+ DW_WDT_DBGFS_REG("param1", WDOG_COMP_PARAMS_1_REG_OFFSET),
+ DW_WDT_DBGFS_REG("version", WDOG_COMP_VERSION_REG_OFFSET),
+ DW_WDT_DBGFS_REG("type", WDOG_COMP_TYPE_REG_OFFSET)
+};
+
+static void dw_wdt_dbgfs_init(struct dw_wdt *dw_wdt)
+{
+ struct device *dev = dw_wdt->wdd.parent;
+ struct debugfs_regset32 *regset;
+
+ regset = devm_kzalloc(dev, sizeof(*regset), GFP_KERNEL);
+ if (!regset)
+ return;
+
+ regset->regs = dw_wdt_dbgfs_regs;
+ regset->nregs = ARRAY_SIZE(dw_wdt_dbgfs_regs);
+ regset->base = dw_wdt->regs;
+
+ dw_wdt->dbgfs_dir = debugfs_create_dir(dev_name(dev), NULL);
+
+ debugfs_create_regset32("registers", 0444, dw_wdt->dbgfs_dir, regset);
+}
+
+static void dw_wdt_dbgfs_clear(struct dw_wdt *dw_wdt)
+{
+ debugfs_remove_recursive(dw_wdt->dbgfs_dir);
+}
+
+#else /* !CONFIG_DEBUG_FS */
+
+static void dw_wdt_dbgfs_init(struct dw_wdt *dw_wdt) {}
+static void dw_wdt_dbgfs_clear(struct dw_wdt *dw_wdt) {}
+
+#endif /* !CONFIG_DEBUG_FS */
+
static int dw_wdt_drv_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -607,6 +671,8 @@ static int dw_wdt_drv_probe(struct platform_device *pdev)
if (ret)
goto out_disable_pclk;
+ dw_wdt_dbgfs_init(dw_wdt);
+
return 0;
out_disable_pclk:
@@ -621,6 +687,8 @@ static int dw_wdt_drv_remove(struct platform_device *pdev)
{
struct dw_wdt *dw_wdt = platform_get_drvdata(pdev);
+ dw_wdt_dbgfs_clear(dw_wdt);
+
watchdog_unregister_device(&dw_wdt->wdd);
reset_control_assert(dw_wdt->rst);
clk_disable_unprepare(dw_wdt->pclk);
--
2.26.2
^ permalink raw reply related
* [PATCH v4 2/7] dt-bindings: watchdog: dw-wdt: Support devices with asynch clocks
From: Serge Semin @ 2020-05-30 7:35 UTC (permalink / raw)
To: Wim Van Sebroeck, Guenter Roeck, Rob Herring
Cc: Serge Semin, Serge Semin, Rob Herring, Alexey Malahov,
Thomas Bogendoerfer, Arnd Bergmann, linux-mips, linux-watchdog,
devicetree, linux-kernel
In-Reply-To: <20200530073557.22661-1-Sergey.Semin@baikalelectronics.ru>
DW Watchdog IP core can be synthesised with asynchronous timer/APB
clocks support (WDT_ASYNC_CLK_MODE_ENABLE == 1). In this case
separate clock signals are supposed to be used to feed watchdog timer
and APB interface of the device. Let's update the DW Watchdog DT node
schema so it would support the optional APB3 bus clock specified along
with the mandatory watchdog timer reference clock.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
---
Changelog v2:
- It's a new patch unpinned from the previous one.
---
.../devicetree/bindings/watchdog/snps,dw-wdt.yaml | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
index 4f6944756ab4..5bf6dc6377f3 100644
--- a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
@@ -24,8 +24,16 @@ properties:
maxItems: 1
clocks:
+ minItems: 1
items:
- description: Watchdog timer reference clock
+ - description: APB3 interface clock
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: tclk
+ - const: pclk
resets:
description: Phandle to the DW Watchdog reset lane
--
2.26.2
^ permalink raw reply related
* checkpatch warnings with PCI DT compatible string
From: Jiaxun Yang @ 2020-05-30 7:17 UTC (permalink / raw)
To: robh; +Cc: apw, joe, devicetree, linux-kernel
Hi there,
When I was trying to create dts for my platform that need PCI
DeviceTree sub node to express interrupt of children devices under the
bridge, like this:
pci@1a000000 {
compatible = "loongson,ls7a-pci";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <2>;
msi-parent = <&msi>;
reg = <0 0x1a000000 0 0x02000000>,
<0xefe 0x00000000 0 0x20000000>;
ranges = <0x01000000 0x0 0x00020000 0x0 0x00020000 0x0 0x00020000>,
<0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>;
ohci@4,0 {
compatible = "pci0014,7a24.0",
"pci0014,7a24",
"pciclass0c0310",
"pciclass0c03";
reg = <0x2000 0x0 0x0 0x0 0x0>;
interrupts = <49 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&pic>;
};
};
I got such checkpatch warnings:
WARNING: DT compatible string "pci0014,7a24.0" appears un-documented --
check ./Documentation/devicetree/bindings/ #206: FILE:
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:38:
+ compatible = "pci0014,7a24.0",
WARNING: DT compatible string vendor "pci0014" appears un-documented --
check ./Documentation/devicetree/bindings/vendor-prefixes.yaml #206:
FILE: arch/mips/boot/dts/loongson/ls7a-pch.dtsi:38:
+ compatible = "pci0014,7a24.0",
Just wonder if using such compatible string is allowed?
I've saw some some usages like mine in the tree, such as
arch/x86/platform/ce4100/falconfalls.dts, and
arch/mips/boot/dts/img/boston.dts.
If that's allowed, should we surpress these warnings in checkpatch
script?
Thanks.
--
Jiaxun Yang
^ permalink raw reply
* Re: [PATCH 1/3] dt-bindings: net: wireless: mt76: add power-limits node
From: Felix Fietkau @ 2020-05-30 7:05 UTC (permalink / raw)
To: Rob Herring; +Cc: linux-wireless, devicetree
In-Reply-To: <20200529212637.GA2994957@bogus>
On 2020-05-29 23:26, Rob Herring wrote:
> On Fri, May 29, 2020 at 06:19:27PM +0200, Felix Fietkau wrote:
>> This subnode can be used to set per-rate tx power limits either per
>> country code / regdomain or globally.
>> These limits are typically provided by the device manufacturers and are
>> used to limit sideband emissions and stay within regulatory limits
>
> How do other WiFi chips handle this? If this is added to DT, then it
> should be common for all WiFi h/w.
Most devices store this data in EEPROM, and the way it's handled also
varies across different chips. QCA has EEPROM data that only provides
limits for edge channels (called "conformance test limits")
The only other example I could find of a driver that stores it in DT is
mwifiex, which uses an opaque short array of bytes that is passed to the
firmware directly.
So I don't think it makes sense to put this in the common bindings.
On the other hand, I did try to keep the format as generic and
extensible as possible, so we could always move it over from mt76 to the
common binding once we encounter another driver that needs something
like this.
- Felix
^ permalink raw reply
* Re: [PATCH v3 6/7] watchdog: dw_wdt: Add pre-timeouts support
From: Serge Semin @ 2020-05-30 6:51 UTC (permalink / raw)
To: Guenter Roeck
Cc: Serge Semin, Wim Van Sebroeck, Alexey Malahov,
Thomas Bogendoerfer, Arnd Bergmann, Rob Herring, linux-mips,
devicetree, linux-watchdog, linux-kernel
In-Reply-To: <20200529230219.GA194766@roeck-us.net>
On Fri, May 29, 2020 at 04:02:19PM -0700, Guenter Roeck wrote:
> On Tue, May 26, 2020 at 06:41:22PM +0300, Serge Semin wrote:
> > DW Watchdog can rise an interrupt in case if IRQ request mode is enabled
> > and timer reaches the zero value. In this case the IRQ lane is left
> > pending until either the next watchdog kick event (watchdog restart) or
> > until the WDT_EOI register is read or the device/system reset. This
> > interface can be used to implement the pre-timeout functionality
> > optionally provided by the Linux kernel watchdog devices.
> >
> > IRQ mode provides a two stages timeout interface. It means the IRQ is
> > raised when the counter reaches zero, while the system reset occurs only
> > after subsequent timeout if the timer restart is not performed. Due to
> > this peculiarity the pre-timeout value is actually set to the achieved
> > hardware timeout, while the real watchdog timeout is considered to be
> > twice as much of it. This applies a significant limitation on the
> > pre-timeout values, so current implementation supports either zero value,
> > which disables the pre-timeout events, or non-zero values, which imply
> > the pre-timeout to be at least half of the current watchdog timeout.
> >
> > Note that we ask the interrupt controller to detect the rising-edge
> > pre-timeout interrupts to prevent the high-level-IRQs flood, since
> > if the pre-timeout happens, the IRQ lane will be left pending until
> > it's cleared by the timer restart.
> >
> > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> > Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
> > Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> > Cc: Arnd Bergmann <arnd@arndb.de>
> > Cc: Rob Herring <robh+dt@kernel.org>
> > Cc: linux-mips@vger.kernel.org
> > Cc: devicetree@vger.kernel.org
>
> Nitpick below, but I don't really know what to do about it, so
>
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Right. Semantically platform_get_irq_optional() should never return zero even
though the comment above that function definition states otherwise. I'll fix the
conditional statement to check for > 0 you've commented below and resend with
your tag attached. Thanks.
-Sergey
>
> > ---
> >
> > Changelog v2:
> > - Rearrange SoBs.
> > - Make the Pre-timeout IRQ being optionally supported.
> > ---
> > drivers/watchdog/dw_wdt.c | 138 +++++++++++++++++++++++++++++++++++---
> > 1 file changed, 130 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c
> > index efbc36872670..3cd7c485cd70 100644
> > --- a/drivers/watchdog/dw_wdt.c
> > +++ b/drivers/watchdog/dw_wdt.c
> > @@ -22,6 +22,7 @@
> > #include <linux/kernel.h>
> > #include <linux/module.h>
> > #include <linux/moduleparam.h>
> > +#include <linux/interrupt.h>
> > #include <linux/of.h>
> > #include <linux/pm.h>
> > #include <linux/platform_device.h>
> > @@ -36,6 +37,8 @@
> > #define WDOG_CURRENT_COUNT_REG_OFFSET 0x08
> > #define WDOG_COUNTER_RESTART_REG_OFFSET 0x0c
> > #define WDOG_COUNTER_RESTART_KICK_VALUE 0x76
> > +#define WDOG_INTERRUPT_STATUS_REG_OFFSET 0x10
> > +#define WDOG_INTERRUPT_CLEAR_REG_OFFSET 0x14
> > #define WDOG_COMP_PARAMS_1_REG_OFFSET 0xf4
> > #define WDOG_COMP_PARAMS_1_USE_FIX_TOP BIT(6)
> >
> > @@ -59,6 +62,11 @@ module_param(nowayout, bool, 0);
> > MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
> > "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> >
> > +enum dw_wdt_rmod {
> > + DW_WDT_RMOD_RESET = 1,
> > + DW_WDT_RMOD_IRQ = 2
> > +};
> > +
> > struct dw_wdt_timeout {
> > u32 top_val;
> > unsigned int sec;
> > @@ -70,6 +78,7 @@ struct dw_wdt {
> > struct clk *clk;
> > struct clk *pclk;
> > unsigned long rate;
> > + enum dw_wdt_rmod rmod;
> > struct dw_wdt_timeout timeouts[DW_WDT_NUM_TOPS];
> > struct watchdog_device wdd;
> > struct reset_control *rst;
> > @@ -86,6 +95,20 @@ static inline int dw_wdt_is_enabled(struct dw_wdt *dw_wdt)
> > WDOG_CONTROL_REG_WDT_EN_MASK;
> > }
> >
> > +static void dw_wdt_update_mode(struct dw_wdt *dw_wdt, enum dw_wdt_rmod rmod)
> > +{
> > + u32 val;
> > +
> > + val = readl(dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
> > + if (rmod == DW_WDT_RMOD_IRQ)
> > + val |= WDOG_CONTROL_REG_RESP_MODE_MASK;
> > + else
> > + val &= ~WDOG_CONTROL_REG_RESP_MODE_MASK;
> > + writel(val, dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
> > +
> > + dw_wdt->rmod = rmod;
> > +}
> > +
> > static unsigned int dw_wdt_find_best_top(struct dw_wdt *dw_wdt,
> > unsigned int timeout, u32 *top_val)
> > {
> > @@ -145,7 +168,11 @@ static unsigned int dw_wdt_get_timeout(struct dw_wdt *dw_wdt)
> > break;
> > }
> >
> > - return dw_wdt->timeouts[idx].sec;
> > + /*
> > + * In IRQ mode due to the two stages counter, the actual timeout is
> > + * twice greater than the TOP setting.
> > + */
> > + return dw_wdt->timeouts[idx].sec * dw_wdt->rmod;
> > }
> >
> > static int dw_wdt_ping(struct watchdog_device *wdd)
> > @@ -164,7 +191,20 @@ static int dw_wdt_set_timeout(struct watchdog_device *wdd, unsigned int top_s)
> > unsigned int timeout;
> > u32 top_val;
> >
> > - timeout = dw_wdt_find_best_top(dw_wdt, top_s, &top_val);
> > + /*
> > + * Note IRQ mode being enabled means having a non-zero pre-timeout
> > + * setup. In this case we try to find a TOP as close to the half of the
> > + * requested timeout as possible since DW Watchdog IRQ mode is designed
> > + * in two stages way - first timeout rises the pre-timeout interrupt,
> > + * second timeout performs the system reset. So basically the effective
> > + * watchdog-caused reset happens after two watchdog TOPs elapsed.
> > + */
> > + timeout = dw_wdt_find_best_top(dw_wdt, DIV_ROUND_UP(top_s, dw_wdt->rmod),
> > + &top_val);
> > + if (dw_wdt->rmod == DW_WDT_RMOD_IRQ)
> > + wdd->pretimeout = timeout;
> > + else
> > + wdd->pretimeout = 0;
> >
> > /*
> > * Set the new value in the watchdog. Some versions of dw_wdt
> > @@ -175,25 +215,47 @@ static int dw_wdt_set_timeout(struct watchdog_device *wdd, unsigned int top_s)
> > writel(top_val | top_val << WDOG_TIMEOUT_RANGE_TOPINIT_SHIFT,
> > dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
> >
> > + /* Kick new TOP value into the watchdog counter if activated. */
> > + if (watchdog_active(wdd))
> > + dw_wdt_ping(wdd);
> > +
> > /*
> > * In case users set bigger timeout value than HW can support,
> > * kernel(watchdog_dev.c) helps to feed watchdog before
> > * wdd->max_hw_heartbeat_ms
> > */
> > if (top_s * 1000 <= wdd->max_hw_heartbeat_ms)
> > - wdd->timeout = timeout;
> > + wdd->timeout = timeout * dw_wdt->rmod;
> > else
> > wdd->timeout = top_s;
> >
> > return 0;
> > }
> >
> > +static int dw_wdt_set_pretimeout(struct watchdog_device *wdd, unsigned int req)
> > +{
> > + struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
> > +
> > + /*
> > + * We ignore actual value of the timeout passed from user-space
> > + * using it as a flag whether the pretimeout functionality is intended
> > + * to be activated.
> > + */
> > + dw_wdt_update_mode(dw_wdt, req ? DW_WDT_RMOD_IRQ : DW_WDT_RMOD_RESET);
> > + dw_wdt_set_timeout(wdd, wdd->timeout);
> > +
> > + return 0;
> > +}
> > +
> > static void dw_wdt_arm_system_reset(struct dw_wdt *dw_wdt)
> > {
> > u32 val = readl(dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
> >
> > - /* Disable interrupt mode; always perform system reset. */
> > - val &= ~WDOG_CONTROL_REG_RESP_MODE_MASK;
> > + /* Disable/enable interrupt mode depending on the RMOD flag. */
> > + if (dw_wdt->rmod == DW_WDT_RMOD_IRQ)
> > + val |= WDOG_CONTROL_REG_RESP_MODE_MASK;
> > + else
> > + val &= ~WDOG_CONTROL_REG_RESP_MODE_MASK;
> > /* Enable watchdog. */
> > val |= WDOG_CONTROL_REG_WDT_EN_MASK;
> > writel(val, dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
> > @@ -231,6 +293,7 @@ static int dw_wdt_restart(struct watchdog_device *wdd,
> > struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
> >
> > writel(0, dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
> > + dw_wdt_update_mode(dw_wdt, DW_WDT_RMOD_RESET);
> > if (dw_wdt_is_enabled(dw_wdt))
> > writel(WDOG_COUNTER_RESTART_KICK_VALUE,
> > dw_wdt->regs + WDOG_COUNTER_RESTART_REG_OFFSET);
> > @@ -246,9 +309,19 @@ static int dw_wdt_restart(struct watchdog_device *wdd,
> > static unsigned int dw_wdt_get_timeleft(struct watchdog_device *wdd)
> > {
> > struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
> > + unsigned int sec;
> > + u32 val;
> > +
> > + val = readl(dw_wdt->regs + WDOG_CURRENT_COUNT_REG_OFFSET);
> > + sec = val / dw_wdt->rate;
> >
> > - return readl(dw_wdt->regs + WDOG_CURRENT_COUNT_REG_OFFSET) /
> > - dw_wdt->rate;
> > + if (dw_wdt->rmod == DW_WDT_RMOD_IRQ) {
> > + val = readl(dw_wdt->regs + WDOG_INTERRUPT_STATUS_REG_OFFSET);
> > + if (!val)
> > + sec += wdd->pretimeout;
> > + }
> > +
> > + return sec;
> > }
> >
> > static const struct watchdog_info dw_wdt_ident = {
> > @@ -257,16 +330,41 @@ static const struct watchdog_info dw_wdt_ident = {
> > .identity = "Synopsys DesignWare Watchdog",
> > };
> >
> > +static const struct watchdog_info dw_wdt_pt_ident = {
> > + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
> > + WDIOF_PRETIMEOUT | WDIOF_MAGICCLOSE,
> > + .identity = "Synopsys DesignWare Watchdog",
> > +};
> > +
> > static const struct watchdog_ops dw_wdt_ops = {
> > .owner = THIS_MODULE,
> > .start = dw_wdt_start,
> > .stop = dw_wdt_stop,
> > .ping = dw_wdt_ping,
> > .set_timeout = dw_wdt_set_timeout,
> > + .set_pretimeout = dw_wdt_set_pretimeout,
> > .get_timeleft = dw_wdt_get_timeleft,
> > .restart = dw_wdt_restart,
> > };
> >
> > +static irqreturn_t dw_wdt_irq(int irq, void *devid)
> > +{
> > + struct dw_wdt *dw_wdt = devid;
> > + u32 val;
> > +
> > + /*
> > + * We don't clear the IRQ status. It's supposed to be done by the
> > + * following ping operations.
> > + */
> > + val = readl(dw_wdt->regs + WDOG_INTERRUPT_STATUS_REG_OFFSET);
> > + if (!val)
> > + return IRQ_NONE;
> > +
> > + watchdog_notify_pretimeout(&dw_wdt->wdd);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > #ifdef CONFIG_PM_SLEEP
> > static int dw_wdt_suspend(struct device *dev)
> > {
> > @@ -447,6 +545,31 @@ static int dw_wdt_drv_probe(struct platform_device *pdev)
> > goto out_disable_pclk;
> > }
> >
> > + /* Enable normal reset without pre-timeout by default. */
> > + dw_wdt_update_mode(dw_wdt, DW_WDT_RMOD_RESET);
> > +
> > + /*
> > + * Pre-timeout IRQ is optional, since some hardware may lack support
> > + * of it. Note we must request rising-edge IRQ, since the lane is left
> > + * pending either until the next watchdog kick event or up to the
> > + * system reset.
> > + */
> > + ret = platform_get_irq_optional(pdev, 0);
> > + if (ret >= 0) {
>
> I keep seeing notes that an interrupt value of 0 is invalid.
>
> > + ret = devm_request_irq(dev, ret, dw_wdt_irq,
> > + IRQF_SHARED | IRQF_TRIGGER_RISING,
> > + pdev->name, dw_wdt);
> > + if (ret)
> > + goto out_disable_pclk;
> > +
> > + dw_wdt->wdd.info = &dw_wdt_pt_ident;
> > + } else {
> > + if (ret == -EPROBE_DEFER)
> > + goto out_disable_pclk;
> > +
> > + dw_wdt->wdd.info = &dw_wdt_ident;
> > + }
> > +
> > reset_control_deassert(dw_wdt->rst);
> >
> > ret = dw_wdt_init_timeouts(dw_wdt, dev);
> > @@ -454,7 +577,6 @@ static int dw_wdt_drv_probe(struct platform_device *pdev)
> > goto out_disable_clk;
> >
> > wdd = &dw_wdt->wdd;
> > - wdd->info = &dw_wdt_ident;
> > wdd->ops = &dw_wdt_ops;
> > wdd->min_timeout = dw_wdt_get_min_timeout(dw_wdt);
> > wdd->max_hw_heartbeat_ms = dw_wdt_get_max_timeout_ms(dw_wdt);
^ permalink raw reply
* Re: [RFC v3 1/3] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements
From: Wesley Cheng @ 2020-05-30 6:42 UTC (permalink / raw)
To: Jack Pham
Cc: robh+dt, bjorn.andersson, balbi, gregkh, agross, linux-kernel,
linux-arm-msm, devicetree, linux-usb
In-Reply-To: <20200529162856.GA10327@jackp-linux.qualcomm.com>
On 5/29/2020 9:28 AM, Jack Pham wrote:
> Hi Wesley,
>
> On Wed, May 27, 2020 at 06:46:01PM -0700, Wesley Cheng wrote:
>> Some devices have USB compositions which may require multiple endpoints
>> that support EP bursting. HW defined TX FIFO sizes may not always be
>> sufficient for these compositions. By utilizing flexible TX FIFO
>> allocation, this allows for endpoints to request the required FIFO depth to
>> achieve higher bandwidth. With some higher bMaxBurst configurations, using
>> a larger TX FIFO size results in better TX throughput.
>>
>> Ensure that one TX FIFO is reserved for every IN endpoint. This allows for
>> the FIFO logic to prevent running out of FIFO space.
>>
>> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
>> ---
>
> <snip>
>
>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
>> index 00746c2..9b09528 100644
>> --- a/drivers/usb/dwc3/gadget.c
>> +++ b/drivers/usb/dwc3/gadget.c
>> @@ -540,6 +540,117 @@ static int dwc3_gadget_start_config(struct dwc3_ep *dep)
>> return 0;
>> }
>>
>> +/*
>> + * dwc3_gadget_resize_tx_fifos - reallocate fifo spaces for current use-case
>> + * @dwc: pointer to our context structure
>> + *
>> + * This function will a best effort FIFO allocation in order
>> + * to improve FIFO usage and throughput, while still allowing
>> + * us to enable as many endpoints as possible.
>> + *
>> + * Keep in mind that this operation will be highly dependent
>> + * on the configured size for RAM1 - which contains TxFifo -,
>> + * the amount of endpoints enabled on coreConsultant tool, and
>> + * the width of the Master Bus.
>> + *
>> + * In general, FIFO depths are represented with the following equation:
>> + *
>> + * fifo_size = mult * ((max_packet + mdwidth)/mdwidth + 1) + 1
>> + *
>> + * Conversions can be done to the equation to derive the number of packets that
>> + * will fit to a particular FIFO size value.
>> + */
>> +static int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc, struct dwc3_ep *dep)
>
> The 'dep' param should be sufficient; we can just get 'dwc' from
> dep->dwc. That will make it more clear this function operates on each
> endpoint that needs resizing.
>
Hi Jack,
Thanks for the inputs. Sure, I agree with that. Will make the changes
to pass in only the dep.
>> +{
>> + int ram1_depth, mdwidth, fifo_0_start, tmp, num_in_ep;
>> + int min_depth, remaining, fifo_size, mult = 1, fifo, max_packet = 1024;
>> +
>> + if (!dwc->needs_fifo_resize)
>> + return 0;
>> +
>> + /* resize IN endpoints except ep0 */
>> + if (!usb_endpoint_dir_in(dep->endpoint.desc) || dep->number <= 1)
>> + return 0;
>> +
>> + /* Don't resize already resized IN endpoint */
>> + if (dep->fifo_depth)
>> + return 0;
>> +
>> + ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
>> + mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
>> + /* MDWIDTH is represented in bits, we need it in bytes */
>> + mdwidth >>= 3;
>> +
>> + if (((dep->endpoint.maxburst > 1) &&
>> + usb_endpoint_xfer_bulk(dep->endpoint.desc))
>> + || usb_endpoint_xfer_isoc(dep->endpoint.desc))
>> + mult = 3;
>> +
>> + if ((dep->endpoint.maxburst > 6) &&
>> + usb_endpoint_xfer_bulk(dep->endpoint.desc)
>> + && dwc3_is_usb31(dwc))
>> + mult = 6;
>> +
>> + /* FIFO size for a single buffer */
>> + fifo = (max_packet + mdwidth)/mdwidth;
>> + fifo++;
>> +
>> + /* Calculate the number of remaining EPs w/o any FIFO */
>> + num_in_ep = dwc->num_eps/2;
>> + num_in_ep -= dwc->num_ep_resized;
>> + /* Ignore EP0 IN */
>> + num_in_ep--;
>> +
>> + /* Reserve at least one FIFO for the number of IN EPs */
>> + min_depth = num_in_ep * (fifo+1);
>> + remaining = ram1_depth - min_depth - dwc->last_fifo_depth;
>> +
>> + /* We've already reserved 1 FIFO per EP, so check what we can fit in
>> + * addition to it. If there is not enough remaining space, allocate
>> + * all the remaining space to the EP.
>> + */
>> + fifo_size = (mult-1) * fifo;
>> + if (remaining < fifo_size) {
>> + if (remaining > 0)
>> + fifo_size = remaining;
>> + else
>> + fifo_size = 0;
>> + }
>> +
>> + fifo_size += fifo;
>> + fifo_size++;
>> + dep->fifo_depth = fifo_size;
>> +
>> + /* Check if TXFIFOs start at non-zero addr */
>> + tmp = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(0));
>> + fifo_0_start = DWC3_GTXFIFOSIZ_TXFSTADDR(tmp);
>> +
>> + fifo_size |= (fifo_0_start + (dwc->last_fifo_depth << 16));
>> + if (dwc3_is_usb31(dwc))
>> + dwc->last_fifo_depth += DWC31_GTXFIFOSIZ_TXFDEP(fifo_size);
>> + else
>> + dwc->last_fifo_depth += DWC3_GTXFIFOSIZ_TXFDEP(fifo_size);
>> +
>> + /* Check fifo size allocation doesn't exceed available RAM size. */
>> + if (dwc->last_fifo_depth >= ram1_depth) {
>> + dev_err(dwc->dev, "Fifosize(%d) > RAM size(%d) %s depth:%d\n",
>> + (dwc->last_fifo_depth * mdwidth), ram1_depth,
>> + dep->endpoint.name, fifo_size);
>
> Use dev_WARN() here and eliminate the WARN_ON(1) below?
>
I think we can just remove the WARN_ON() entirely, and keep the
dev_err(). Printing the callstack might not be really useful in
general, since this would only be called during the EP enable step.
>> + if (dwc3_is_usb31(dwc))
>> + fifo_size = DWC31_GTXFIFOSIZ_TXFDEP(fifo_size);
>> + else
>> + fifo_size = DWC3_GTXFIFOSIZ_TXFDEP(fifo_size);
>> + dwc->last_fifo_depth -= fifo_size;
>> + dep->fifo_depth = 0;
>> + WARN_ON(1);
>> + return -ENOMEM;
>> + }
>> +
>> + dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(dep->number >> 1), fifo_size);
>> + dwc->num_ep_resized++;
>> + return 0;
>> +}
>> +
>> static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action)
>> {
>> const struct usb_ss_ep_comp_descriptor *comp_desc;
>> @@ -620,6 +731,10 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action)
>> int ret;
>>
>> if (!(dep->flags & DWC3_EP_ENABLED)) {
>> + ret = dwc3_gadget_resize_tx_fifos(dwc, dep);
>> + if (ret)
>> + return ret;
>> +
>> ret = dwc3_gadget_start_config(dep);
>> if (ret)
>> return ret;
>
> Jack
>
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply
* Re: [RFC v3 0/3] Re-introduce TX FIFO resize for larger EP bursting
From: Wesley Cheng @ 2020-05-30 6:31 UTC (permalink / raw)
To: Greg KH
Cc: robh+dt, bjorn.andersson, balbi, agross, linux-kernel,
linux-arm-msm, devicetree, linux-usb
In-Reply-To: <20200529101214.GA1321073@kroah.com>
On 5/29/2020 3:12 AM, Greg KH wrote:
> On Wed, May 27, 2020 at 06:46:00PM -0700, Wesley Cheng wrote:
>> Changes in V3:
>> - Removed "Reviewed-by" tags
>> - Renamed series back to RFC
>> - Modified logic to ensure that fifo_size is reset if we pass the minimum
>> threshold. Tested with binding multiple FDs requesting 6 FIFOs.
>>
>> Changes in V2:
>> - Modified TXFIFO resizing logic to ensure that each EP is reserved a
>> FIFO.
>> - Removed dev_dbg() prints and fixed typos from patches
>> - Added some more description on the dt-bindings commit message
>>
>> Currently, there is no functionality to allow for resizing the TXFIFOs, and
>> relying on the HW default setting for the TXFIFO depth. In most cases, the
>> HW default is probably sufficient, but for USB compositions that contain
>> multiple functions that require EP bursting, the default settings
>> might not be enough. Also to note, the current SW will assign an EP to a
>> function driver w/o checking to see if the TXFIFO size for that particular
>> EP is large enough. (this is a problem if there are multiple HW defined
>> values for the TXFIFO size)
>>
>> It is mentioned in the SNPS databook that a minimum of TX FIFO depth = 3
>> is required for an EP that supports bursting. Otherwise, there may be
>> frequent occurences of bursts ending. For high bandwidth functions,
>> such as data tethering (protocols that support data aggregation), mass
>> storage, and media transfer protocol (over FFS), the bMaxBurst value can be
>> large, and a bigger TXFIFO depth may prove to be beneficial in terms of USB
>> throughput. (which can be associated to system access latency, etc...) It
>> allows for a more consistent burst of traffic, w/o any interruptions, as
>> data is readily available in the FIFO.
>>
>> With testing done using the mass storage function driver, the results show
>> that with a larger TXFIFO depth, the bandwidth increased significantly.
>
> Why is this still a "RFC" series? That implies you don't want this
> applied...
>
Hi Greg,
As Felipe mentioned, we need to make sure that this TX FIFO resize logic
is carefully thought out, since the behavior could be different based
off the HW configuration as shown in the past. Eventually, I hope that
this does get applied, but I think the changes needs more detailed
reviews, as there may be potential shortfalls I did not consider due to
my limited knowledge of what happened w/ the previous logic. That's
pretty much the reason for tagging it as a RFC, since we still need to
hash out if this is the right approach.
Thanks!
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply
* [PATCH v11 2/2] mtd: rawnand: Add NAND controller support on Intel LGM SoC
From: Ramuthevar,Vadivel MuruganX @ 2020-05-30 0:51 UTC (permalink / raw)
To: linux-kernel, linux-mtd, devicetree, miquel.raynal
Cc: richard, vigneshr, arnd, brendanhiggins, tglx, boris.brezillon,
anders.roxell, masonccyang, robh+dt, linux-mips, hauke.mehrtens,
andriy.shevchenko, qi-ming.wu, cheol.yong.kim,
Ramuthevar Vadivel Murugan
In-Reply-To: <20200530005117.10986-1-vadivel.muruganx.ramuthevar@linux.intel.com>
From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
This patch adds the new IP of Nand Flash Controller(NFC) support
on Intel's Lightning Mountain(LGM) SoC.
DMA is used for burst data transfer operation, also DMA HW supports
aligned 32bit memory address and aligned data access by default.
DMA burst of 8 supported. Data register used to support the read/write
operation from/to device.
NAND controller driver implements ->exec_op() to replace legacy hooks,
these specific call-back method to execute NAND operations.
Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
---
drivers/mtd/nand/raw/Kconfig | 8 +
drivers/mtd/nand/raw/Makefile | 1 +
drivers/mtd/nand/raw/intel-nand-controller.c | 747 +++++++++++++++++++++++++++
3 files changed, 756 insertions(+)
create mode 100644 drivers/mtd/nand/raw/intel-nand-controller.c
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index a80a46bb5b8b..75ab2afb78cf 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -457,6 +457,14 @@ config MTD_NAND_CADENCE
Enable the driver for NAND flash on platforms using a Cadence NAND
controller.
+config MTD_NAND_INTEL_LGM
+ tristate "Support for NAND controller on Intel LGM SoC"
+ depends on OF || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Enables support for NAND Flash chips on Intel's LGM SoC.
+ NAND flash controller interfaced through the External Bus Unit.
+
comment "Misc"
config MTD_SM_COMMON
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index 2d136b158fb7..bfc8fe4d2cb0 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_MTD_NAND_TEGRA) += tegra_nand.o
obj-$(CONFIG_MTD_NAND_STM32_FMC2) += stm32_fmc2_nand.o
obj-$(CONFIG_MTD_NAND_MESON) += meson_nand.o
obj-$(CONFIG_MTD_NAND_CADENCE) += cadence-nand-controller.o
+obj-$(CONFIG_MTD_NAND_INTEL_LGM) += intel-nand-controller.o
nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
nand-objs += nand_onfi.o
diff --git a/drivers/mtd/nand/raw/intel-nand-controller.c b/drivers/mtd/nand/raw/intel-nand-controller.c
new file mode 100644
index 000000000000..564d28978943
--- /dev/null
+++ b/drivers/mtd/nand/raw/intel-nand-controller.c
@@ -0,0 +1,747 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (c) 2020 Intel Corporation. */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-direction.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/nand.h>
+#include <linux/resource.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+
+#define EBU_CLC 0x000
+#define EBU_CLC_RST 0x00000000u
+
+#define EBU_ADDR_SEL(n) (0x20 + (n) * 4)
+/* 5 bits 26:22 included for comparison in the ADDR_SELx */
+#define EBU_ADDR_MASK(x) ((x) << 4)
+#define EBU_ADDR_SEL_REGEN 0x1
+
+#define EBU_BUSCON(n) (0x60 + (n) * 4)
+#define EBU_BUSCON_CMULT_V4 0x1
+#define EBU_BUSCON_RECOVC(n) ((n) << 2)
+#define EBU_BUSCON_HOLDC(n) ((n) << 4)
+#define EBU_BUSCON_WAITRDC(n) ((n) << 6)
+#define EBU_BUSCON_WAITWRC(n) ((n) << 8)
+#define EBU_BUSCON_BCGEN_CS 0x0
+#define EBU_BUSCON_SETUP_EN BIT(22)
+#define EBU_BUSCON_ALEC 0xC000
+
+#define EBU_CON 0x0B0
+#define EBU_CON_NANDM_EN BIT(0)
+#define EBU_CON_NANDM_DIS 0x0
+#define EBU_CON_CSMUX_E_EN BIT(1)
+#define EBU_CON_ALE_P_LOW BIT(2)
+#define EBU_CON_CLE_P_LOW BIT(3)
+#define EBU_CON_CS_P_LOW BIT(4)
+#define EBU_CON_SE_P_LOW BIT(5)
+#define EBU_CON_WP_P_LOW BIT(6)
+#define EBU_CON_PRE_P_LOW BIT(7)
+#define EBU_CON_IN_CS_S(n) ((n) << 8)
+#define EBU_CON_OUT_CS_S(n) ((n) << 10)
+#define EBU_CON_LAT_EN_CS_P ((0x3D) << 18)
+
+#define EBU_WAIT 0x0B4
+#define EBU_WAIT_RDBY BIT(0)
+#define EBU_WAIT_WR_C BIT(3)
+
+#define HSNAND_CTL1 0x110
+#define HSNAND_CTL1_ADDR_SHIFT 24
+
+#define HSNAND_CTL2 0x114
+#define HSNAND_CTL2_ADDR_SHIFT 8
+#define HSNAND_CTL2_CYC_N_V5 (0x2 << 16)
+
+#define HSNAND_INT_MSK_CTL 0x124
+#define HSNAND_INT_MSK_CTL_WR_C BIT(4)
+
+#define HSNAND_INT_STA 0x128
+#define HSNAND_INT_STA_WR_C BIT(4)
+
+#define HSNAND_CTL 0x130
+#define HSNAND_CTL_ENABLE_ECC BIT(0)
+#define HSNAND_CTL_GO BIT(2)
+#define HSNAND_CTL_CE_SEL_CS(n) BIT(3 + (n))
+#define HSNAND_CTL_RW_READ 0x0
+#define HSNAND_CTL_RW_WRITE BIT(10)
+#define HSNAND_CTL_ECC_OFF_V8TH BIT(11)
+#define HSNAND_CTL_CKFF_EN 0x0
+#define HSNAND_CTL_MSG_EN BIT(17)
+
+#define HSNAND_PARA0 0x13c
+#define HSNAND_PARA0_PAGE_V8192 0x3
+#define HSNAND_PARA0_PIB_V256 (0x3 << 4)
+#define HSNAND_PARA0_BYP_EN_NP 0x0
+#define HSNAND_PARA0_BYP_DEC_NP 0x0
+#define HSNAND_PARA0_TYPE_ONFI BIT(18)
+#define HSNAND_PARA0_ADEP_EN BIT(21)
+
+#define HSNAND_CMSG_0 0x150
+#define HSNAND_CMSG_1 0x154
+
+#define HSNAND_ALE_OFFS BIT(2)
+#define HSNAND_CLE_OFFS BIT(3)
+#define HSNAND_CS_OFFS BIT(4)
+
+#define HSNAND_ECC_OFFSET 0x008
+
+#define NAND_DATA_IFACE_CHECK_ONLY -1
+
+#define MAX_CS 2
+
+struct ebu_nand_cs {
+ void __iomem *chipaddr;
+ dma_addr_t nand_pa;
+ u32 addr_sel;
+};
+
+struct ebu_nand_controller {
+ struct nand_controller controller;
+ struct nand_chip chip;
+ struct device *dev;
+ void __iomem *ebu;
+ void __iomem *hsnand;
+ struct dma_chan *dma_tx;
+ struct dma_chan *dma_rx;
+ struct completion dma_access_complete;
+ unsigned long clk_rate;
+ struct clk *clk;
+ u32 nd_para0;
+ u8 cs_num;
+ struct ebu_nand_cs cs[MAX_CS];
+};
+
+static inline struct ebu_nand_controller *nand_to_ebu(struct nand_chip *chip)
+{
+ return container_of(chip, struct ebu_nand_controller, chip);
+}
+
+static u8 ebu_nand_readb(struct nand_chip *chip)
+{
+ struct ebu_nand_controller *ebu_host = nand_get_controller_data(chip);
+ void __iomem *nand_wait = ebu_host->ebu + EBU_WAIT;
+ u8 cs_num = ebu_host->cs_num;
+ u32 stat;
+ int ret;
+ u8 val;
+
+ val = readb(ebu_host->cs[cs_num].chipaddr + HSNAND_CS_OFFS);
+
+ ret = readl_poll_timeout(nand_wait, stat, stat & EBU_WAIT_WR_C,
+ 20, 1000);
+ if (ret)
+ dev_warn(ebu_host->dev,
+ "ebu nand write timeout. nand_wait(0x%p)=0x%x\n",
+ nand_wait, readl(nand_wait));
+
+ return val;
+}
+
+static void ebu_nand_writeb(struct nand_chip *chip, u32 offset, u8 value)
+{
+ struct ebu_nand_controller *ebu_host = nand_get_controller_data(chip);
+ void __iomem *nand_wait = ebu_host->ebu + EBU_WAIT;
+ u8 cs_num = ebu_host->cs_num;
+ u32 stat;
+ int ret;
+
+ writeb(value, ebu_host->cs[cs_num].chipaddr + offset);
+
+ ret = readl_poll_timeout(nand_wait, stat, stat & EBU_WAIT_WR_C,
+ 20, 1000);
+ if (ret)
+ dev_warn(ebu_host->dev,
+ "ebu nand write timeout. nand_wait(0x%p)=0x%x\n",
+ nand_wait, readl(nand_wait));
+}
+
+static void ebu_read_buf(struct nand_chip *chip, u_char *buf, unsigned int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ buf[i] = ebu_nand_readb(chip);
+}
+
+static void ebu_write_buf(struct nand_chip *chip, const u_char *buf, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ ebu_nand_writeb(chip, HSNAND_CS_OFFS, buf[i]);
+}
+
+static void ebu_nand_disable(struct nand_chip *chip)
+{
+ struct ebu_nand_controller *ebu_host = nand_get_controller_data(chip);
+
+ writel(0, ebu_host->ebu + EBU_CON);
+}
+
+static void ebu_select_chip(struct nand_chip *chip)
+{
+ struct ebu_nand_controller *ebu_host = nand_get_controller_data(chip);
+ void __iomem *nand_con = ebu_host->ebu + EBU_CON;
+ u32 cs = ebu_host->cs_num;
+
+ writel(EBU_CON_NANDM_EN | EBU_CON_CSMUX_E_EN | EBU_CON_CS_P_LOW |
+ EBU_CON_SE_P_LOW | EBU_CON_WP_P_LOW | EBU_CON_PRE_P_LOW |
+ EBU_CON_IN_CS_S(cs) | EBU_CON_OUT_CS_S(cs) |
+ EBU_CON_LAT_EN_CS_P, nand_con);
+}
+
+static void ebu_nand_setup_timing(struct ebu_nand_controller *ctrl,
+ const struct nand_sdr_timings *timings)
+{
+ unsigned int rate = clk_get_rate(ctrl->clk) / 1000000;
+ unsigned int period = DIV_ROUND_UP(1000000, rate);
+ u32 trecov, thold, twrwait, trdwait;
+ u32 reg = 0;
+
+ trecov = DIV_ROUND_UP(max(timings->tREA_max, timings->tREH_min),
+ period);
+ reg |= EBU_BUSCON_RECOVC(trecov);
+
+ thold = DIV_ROUND_UP(max(timings->tDH_min, timings->tDS_min), period);
+ reg |= EBU_BUSCON_HOLDC(thold);
+
+ trdwait = DIV_ROUND_UP(max(timings->tRC_min, timings->tREH_min),
+ period);
+ reg |= EBU_BUSCON_WAITRDC(trdwait);
+
+ twrwait = DIV_ROUND_UP(max(timings->tWC_min, timings->tWH_min), period);
+ reg |= EBU_BUSCON_WAITWRC(twrwait);
+
+ reg |= EBU_BUSCON_CMULT_V4 | EBU_BUSCON_BCGEN_CS | EBU_BUSCON_ALEC |
+ EBU_BUSCON_SETUP_EN;
+
+ writel(reg, ctrl->ebu + EBU_BUSCON(ctrl->cs_num));
+}
+
+static int ebu_nand_setup_data_interface(struct nand_chip *chip, int csline,
+ const struct nand_data_interface *conf)
+{
+ struct ebu_nand_controller *ctrl = nand_to_ebu(chip);
+ const struct nand_sdr_timings *timings;
+
+ timings = nand_get_sdr_timings(conf);
+ if (IS_ERR(timings))
+ return PTR_ERR(timings);
+
+ if (csline == NAND_DATA_IFACE_CHECK_ONLY)
+ return 0;
+
+ ebu_nand_setup_timing(ctrl, timings);
+
+ return 0;
+}
+
+static int ebu_nand_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = HSNAND_ECC_OFFSET;
+ oobregion->length = chip->ecc.total;
+
+ return 0;
+}
+
+static int ebu_nand_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = chip->ecc.total + HSNAND_ECC_OFFSET;
+ oobregion->length = mtd->oobsize - oobregion->offset;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops ebu_nand_ooblayout_ops = {
+ .ecc = ebu_nand_ooblayout_ecc,
+ .free = ebu_nand_ooblayout_free,
+};
+
+static void ebu_dma_rx_callback(void *cookie)
+{
+ struct ebu_nand_controller *ebu_host = cookie;
+
+ dmaengine_terminate_async(ebu_host->dma_rx);
+
+ complete(&ebu_host->dma_access_complete);
+}
+
+static void ebu_dma_tx_callback(void *cookie)
+{
+ struct ebu_nand_controller *ebu_host = cookie;
+
+ dmaengine_terminate_async(ebu_host->dma_tx);
+
+ complete(&ebu_host->dma_access_complete);
+}
+
+static int ebu_dma_start(struct ebu_nand_controller *ebu_host, u32 dir,
+ const u8 *buf, u32 len)
+{
+ struct dma_async_tx_descriptor *tx;
+ struct completion *dma_completion;
+ dma_async_tx_callback callback;
+ struct dma_chan *chan;
+ dma_cookie_t cookie;
+ unsigned long flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
+ dma_addr_t buf_dma;
+ int ret;
+ u32 timeout;
+
+ if (dir == DMA_DEV_TO_MEM) {
+ chan = ebu_host->dma_rx;
+ dma_completion = &ebu_host->dma_access_complete;
+ callback = ebu_dma_rx_callback;
+ } else {
+ chan = ebu_host->dma_tx;
+ dma_completion = &ebu_host->dma_access_complete;
+ callback = ebu_dma_tx_callback;
+ }
+
+ buf_dma = dma_map_single(chan->device->dev, (void *)buf, len, dir);
+ if (dma_mapping_error(chan->device->dev, buf_dma)) {
+ dev_err(ebu_host->dev, "Failed to map DMA buffer\n");
+ ret = -EIO;
+ goto err_unmap;
+ }
+
+ tx = dmaengine_prep_slave_single(chan, buf_dma, len, dir, flags);
+ if (!tx)
+ return -ENXIO;
+
+ tx->callback = callback;
+ tx->callback_param = ebu_host;
+ cookie = tx->tx_submit(tx);
+
+ ret = dma_submit_error(cookie);
+ if (ret) {
+ dev_err(ebu_host->dev, "dma_submit_error %d\n", cookie);
+ ret = -EIO;
+ goto err_unmap;
+ }
+
+ init_completion(dma_completion);
+ dma_async_issue_pending(chan);
+
+ /* Wait DMA to finish the data transfer.*/
+ timeout =
+ wait_for_completion_timeout(dma_completion, msecs_to_jiffies(1000));
+ if (!timeout) {
+ dev_err(ebu_host->dev, "I/O Error in DMA RX (status %d)\n",
+ dmaengine_tx_status(chan, cookie, NULL));
+ dmaengine_terminate_sync(chan);
+ ret = -ETIMEDOUT;
+ goto err_unmap;
+ }
+
+ return 0;
+
+err_unmap:
+ dma_unmap_single(ebu_host->dev, buf_dma, len, dir);
+
+ return ret;
+}
+
+static void ebu_nand_trigger(struct ebu_nand_controller *ebu_host,
+ int page, u32 cmd)
+{
+ unsigned int val;
+
+ val = cmd | (page & 0xFF) << HSNAND_CTL1_ADDR_SHIFT;
+ writel(val, ebu_host->hsnand + HSNAND_CTL1);
+ val = (page & 0xFFFF00) >> 8 | HSNAND_CTL2_CYC_N_V5;
+ writel(val, ebu_host->hsnand + HSNAND_CTL2);
+
+ writel(ebu_host->nd_para0, ebu_host->hsnand + HSNAND_PARA0);
+
+ /* clear first, will update later */
+ writel(0xFFFFFFFF, ebu_host->hsnand + HSNAND_CMSG_0);
+ writel(0xFFFFFFFF, ebu_host->hsnand + HSNAND_CMSG_1);
+
+ writel(HSNAND_INT_MSK_CTL_WR_C,
+ ebu_host->hsnand + HSNAND_INT_MSK_CTL);
+
+ val = cmd == NAND_CMD_READ0 ? HSNAND_CTL_RW_READ : HSNAND_CTL_RW_WRITE;
+
+ writel(HSNAND_CTL_MSG_EN | HSNAND_CTL_CKFF_EN |
+ HSNAND_CTL_ECC_OFF_V8TH | HSNAND_CTL_CE_SEL_CS(ebu_host->cs_num) |
+ HSNAND_CTL_ENABLE_ECC | HSNAND_CTL_GO | val,
+ ebu_host->hsnand + HSNAND_CTL);
+}
+
+static int ebu_nand_read_page_hwecc(struct nand_chip *chip, u8 *buf,
+ int oob_required, int page)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct ebu_nand_controller *ebu_host = nand_get_controller_data(chip);
+ int ret, x;
+
+ ebu_nand_trigger(ebu_host, page, NAND_CMD_READ0);
+
+ ret = ebu_dma_start(ebu_host, DMA_DEV_TO_MEM, buf, mtd->writesize);
+ if (ret)
+ return ret;
+
+ if (oob_required)
+ chip->ecc.read_oob(chip, page);
+
+ x = readl(ebu_host->hsnand + HSNAND_CTL);
+ x &= ~HSNAND_CTL_GO;
+ writel(x, ebu_host->hsnand + HSNAND_CTL);
+
+ return 0;
+}
+
+static int ebu_nand_write_page_hwecc(struct nand_chip *chip, const u8 *buf,
+ int oob_required, int page)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct ebu_nand_controller *ebu_host = nand_get_controller_data(chip);
+ void __iomem *int_sta = ebu_host->hsnand + HSNAND_INT_STA;
+ int ret, val, x;
+ u32 reg;
+
+ ebu_nand_trigger(ebu_host, page, NAND_CMD_SEQIN);
+
+ ret = ebu_dma_start(ebu_host, DMA_MEM_TO_DEV, buf, mtd->writesize);
+ if (ret)
+ return ret;
+
+ if (oob_required) {
+ reg = (chip->oob_poi[3] << 24) | (chip->oob_poi[2] << 16) |
+ (chip->oob_poi[1] << 8) | chip->oob_poi[0];
+
+ writel(reg, ebu_host->hsnand + HSNAND_CMSG_0);
+
+ reg = (chip->oob_poi[7] << 24) | (chip->oob_poi[6] << 16) |
+ (chip->oob_poi[5] << 8) | chip->oob_poi[4];
+
+ writel(reg, ebu_host->hsnand + HSNAND_CMSG_1);
+ }
+
+ ret = readl_poll_timeout_atomic(int_sta, val,
+ !(val & HSNAND_INT_STA_WR_C), 10, 1000);
+ if (ret)
+ return -EIO;
+
+ x = readl(ebu_host->hsnand + HSNAND_CTL);
+ x &= ~HSNAND_CTL_GO;
+ writel(x, ebu_host->hsnand + HSNAND_CTL);
+
+ return 0;
+}
+
+static const u8 ecc_strength[] = { 1, 1, 4, 8, 24, 32, 40, 60, };
+
+static int ebu_nand_attach_chip(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct ebu_nand_controller *ebu_host = nand_get_controller_data(chip);
+ u32 eccsize, eccsteps, eccbytes, ecctotal, pagesize, pg_per_blk;
+ u32 eccstrength = chip->ecc.strength;
+ u32 writesize = mtd->writesize;
+ u32 blocksize = mtd->erasesize;
+ int start, val, i;
+
+ if (chip->ecc.mode != NAND_ECC_HW)
+ return 0;
+
+ /* Check whether eccsize is 0x0 or wrong. assign eccsize = 512 if YES */
+ if (!chip->ecc.size)
+ chip->ecc.size = 512;
+ eccsize = chip->ecc.size;
+
+ switch (eccsize) {
+ case 512:
+ start = 1;
+ if (!eccstrength)
+ eccstrength = 4;
+ break;
+ case 1024:
+ start = 4;
+ if (!eccstrength)
+ eccstrength = 32;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ i = round_up(start + 1, 4);
+ for (val = start; val < i; val++) {
+ if (eccstrength == ecc_strength[val])
+ break;
+ }
+ if (val == i)
+ return -EINVAL;
+
+ if (eccstrength == 8)
+ eccbytes = 14;
+ else
+ eccbytes = DIV_ROUND_UP(eccstrength * fls(8 * eccsize), 8);
+
+ eccsteps = writesize / eccsize;
+ ecctotal = eccsteps * eccbytes;
+ if ((ecctotal + 8) > mtd->oobsize)
+ return -ERANGE;
+
+ chip->ecc.total = ecctotal;
+ pagesize = fls(writesize >> 11);
+ if (pagesize > HSNAND_PARA0_PAGE_V8192)
+ return -ERANGE;
+
+ pg_per_blk = fls((blocksize / writesize) >> 6) << 4;
+ if (pg_per_blk > HSNAND_PARA0_PIB_V256)
+ return -ERANGE;
+
+ ebu_host->nd_para0 = pagesize | pg_per_blk | HSNAND_PARA0_BYP_EN_NP |
+ HSNAND_PARA0_BYP_DEC_NP | HSNAND_PARA0_ADEP_EN |
+ HSNAND_PARA0_TYPE_ONFI | (val << 29);
+
+ mtd_set_ooblayout(mtd, &ebu_nand_ooblayout_ops);
+ chip->ecc.read_page = ebu_nand_read_page_hwecc;
+ chip->ecc.write_page = ebu_nand_write_page_hwecc;
+
+ return 0;
+}
+
+static int ebu_nand_exec_op(struct nand_chip *chip,
+ const struct nand_operation *op, bool check_only)
+{
+ struct ebu_nand_controller *ctrl = nand_to_ebu(chip);
+ const struct nand_op_instr *instr = NULL;
+ unsigned int op_id;
+ int i, time_out, ret = 0;
+ u32 stat;
+
+ ebu_select_chip(chip);
+
+ for (op_id = 0; op_id < op->ninstrs; op_id++) {
+ instr = &op->instrs[op_id];
+
+ switch (instr->type) {
+ case NAND_OP_CMD_INSTR:
+ ebu_nand_writeb(chip, HSNAND_CLE_OFFS | HSNAND_CS_OFFS,
+ instr->ctx.cmd.opcode);
+ break;
+
+ case NAND_OP_ADDR_INSTR:
+ for (i = 0; i < instr->ctx.addr.naddrs; i++)
+ ebu_nand_writeb(chip,
+ HSNAND_ALE_OFFS | HSNAND_CS_OFFS,
+ instr->ctx.addr.addrs[i]);
+ break;
+
+ case NAND_OP_DATA_IN_INSTR:
+ ebu_read_buf(chip, instr->ctx.data.buf.in,
+ instr->ctx.data.len);
+ break;
+
+ case NAND_OP_DATA_OUT_INSTR:
+ ebu_write_buf(chip, instr->ctx.data.buf.out,
+ instr->ctx.data.len);
+ break;
+
+ case NAND_OP_WAITRDY_INSTR:
+ time_out = instr->ctx.waitrdy.timeout_ms * 1000;
+ ret = readl_poll_timeout(ctrl->ebu + EBU_WAIT,
+ stat, stat & EBU_WAIT_RDBY,
+ 20, time_out);
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static const struct nand_controller_ops ebu_nand_controller_ops = {
+ .attach_chip = ebu_nand_attach_chip,
+ .exec_op = ebu_nand_exec_op,
+ .setup_data_interface = ebu_nand_setup_data_interface,
+};
+
+static void ebu_dma_cleanup(struct ebu_nand_controller *ebu_host)
+{
+ if (ebu_host->dma_rx)
+ dma_release_channel(ebu_host->dma_rx);
+
+ if (ebu_host->dma_tx)
+ dma_release_channel(ebu_host->dma_tx);
+}
+
+static int ebu_nand_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ebu_nand_controller *ebu_host;
+ struct nand_chip *nand;
+ struct mtd_info *mtd;
+ struct resource *res;
+ char *resname;
+ int ret, i;
+ u32 reg;
+
+ ebu_host = devm_kzalloc(dev, sizeof(*ebu_host), GFP_KERNEL);
+ if (!ebu_host)
+ return -ENOMEM;
+
+ ebu_host->dev = dev;
+ nand_controller_init(&ebu_host->controller);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ebunand");
+ ebu_host->ebu = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ebu_host->ebu))
+ return PTR_ERR(ebu_host->ebu);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hsnand");
+ ebu_host->hsnand = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ebu_host->hsnand))
+ return PTR_ERR(ebu_host->hsnand);
+
+ ret = device_property_read_u32(dev, "nand,cs", ®);
+ if (ret) {
+ dev_err(dev, "failed to get chip select: %d\n", ret);
+ return ret;
+ }
+ ebu_host->cs_num = reg;
+
+ for (i = 0; i < MAX_CS; i++) {
+ resname = devm_kasprintf(dev, GFP_KERNEL, "nand_cs%d", i);
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ resname);
+ if (!res)
+ return -EINVAL;
+ ebu_host->cs[i].chipaddr = devm_ioremap_resource(dev, res);
+ ebu_host->cs[i].nand_pa = res->start;
+ if (IS_ERR(ebu_host->cs[i].chipaddr))
+ return PTR_ERR(ebu_host->cs[i].chipaddr);
+ }
+
+ ebu_host->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(ebu_host->clk)) {
+ ret = PTR_ERR(ebu_host->clk);
+ dev_err(dev, "failed to get clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(ebu_host->clk);
+ if (ret) {
+ dev_err(dev, "failed to enable clock: %d\n", ret);
+ return ret;
+ }
+ ebu_host->clk_rate = clk_get_rate(ebu_host->clk);
+
+ ebu_host->dma_tx = dma_request_chan(dev, "tx");
+ if (IS_ERR(ebu_host->dma_tx)) {
+ ret = PTR_ERR(ebu_host->dma_tx);
+ dev_err(dev, "DMA tx channel request fail!.\n");
+ goto err_cleanup_dma;
+ }
+
+ ebu_host->dma_rx = dma_request_chan(dev, "rx");
+ if (IS_ERR(ebu_host->dma_rx)) {
+ ret = PTR_ERR(ebu_host->dma_rx);
+ dev_err(dev, "DMA rx channel request fail!.\n");
+ goto err_cleanup_dma;
+ }
+
+ for (i = 0; i < MAX_CS; i++) {
+ resname = devm_kasprintf(dev, GFP_KERNEL, "addr_sel%d", i);
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ resname);
+ if (!res)
+ return -EINVAL;
+ ebu_host->cs[i].addr_sel = res->start;
+ writel(ebu_host->cs[i].addr_sel | EBU_ADDR_MASK(5) |
+ EBU_ADDR_SEL_REGEN, ebu_host->ebu + EBU_ADDR_SEL(i));
+ }
+
+ nand_set_flash_node(&ebu_host->chip, dev->of_node);
+ mtd = nand_to_mtd(&ebu_host->chip);
+ mtd->dev.parent = dev;
+ ebu_host->dev = dev;
+
+ platform_set_drvdata(pdev, ebu_host);
+ nand_set_controller_data(&ebu_host->chip, ebu_host);
+
+ nand = &ebu_host->chip;
+ nand->controller = &ebu_host->controller;
+ nand->controller->ops = &ebu_nand_controller_ops;
+
+ /* Scan to find existence of the device */
+ ret = nand_scan(&ebu_host->chip, 1);
+ if (ret)
+ goto err_cleanup_dma;
+
+ ret = mtd_device_register(mtd, NULL, 0);
+ if (ret)
+ goto err_clean_nand;
+
+ return 0;
+
+err_clean_nand:
+ nand_cleanup(&ebu_host->chip);
+err_cleanup_dma:
+ ebu_dma_cleanup(ebu_host);
+ clk_disable_unprepare(ebu_host->clk);
+
+ return ret;
+}
+
+static int ebu_nand_remove(struct platform_device *pdev)
+{
+ struct ebu_nand_controller *ebu_host = platform_get_drvdata(pdev);
+
+ mtd_device_unregister(nand_to_mtd(&ebu_host->chip));
+ nand_cleanup(&ebu_host->chip);
+ ebu_nand_disable(&ebu_host->chip);
+ ebu_dma_cleanup(ebu_host);
+ clk_disable_unprepare(ebu_host->clk);
+
+ return 0;
+}
+
+static const struct of_device_id ebu_nand_match[] = {
+ { .compatible = "intel,nand-controller", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ebu_nand_match);
+
+static struct platform_driver ebu_nand_driver = {
+ .probe = ebu_nand_probe,
+ .remove = ebu_nand_remove,
+ .driver = {
+ .name = "intel-nand-controller",
+ .of_match_table = ebu_nand_match,
+ },
+
+};
+module_platform_driver(ebu_nand_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Vadivel Murugan R <vadivel.muruganx.ramuthevar@intel.com>");
+MODULE_DESCRIPTION("Intel's LGM External Bus NAND Controller driver");
--
2.11.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox