* [PATCH AUTOSEL 6.6 21/75] arm64: dts: rockchip: fix rk3328 hdmi ports node
From: Sasha Levin @ 2024-03-29 12:42 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Johan Jonker, Heiko Stuebner, Sasha Levin, robh,
krzysztof.kozlowski+dt, conor+dt, dsimic, shironeko, jonas,
devicetree, linux-arm-kernel, linux-rockchip
In-Reply-To: <20240329124330.3089520-1-sashal@kernel.org>
From: Johan Jonker <jbx6244@gmail.com>
[ Upstream commit 1d00ba4700d1e0f88ae70d028d2e17e39078fa1c ]
Fix rk3328 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/e5dea3b7-bf84-4474-9530-cc2da3c41104@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index cc8209795c3e5..3778fe5c42a4b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -743,11 +743,20 @@ hdmi: hdmi@ff3c0000 {
status = "disabled";
ports {
- hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
+
hdmi_in_vop: endpoint {
remote-endpoint = <&vop_out_hdmi>;
};
};
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
};
};
--
2.43.0
^ permalink raw reply related
* [PATCH AUTOSEL 6.6 22/75] arm64: dts: rockchip: fix rk3399 hdmi ports node
From: Sasha Levin @ 2024-03-29 12:42 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Johan Jonker, Heiko Stuebner, Sasha Levin, robh,
krzysztof.kozlowski+dt, conor+dt, dsimic, quentin.schulz,
lukasz.luba, s.hauer, rick.wertenbroek, chris.obbard, knaerzche,
devicetree, linux-arm-kernel, linux-rockchip
In-Reply-To: <20240329124330.3089520-1-sashal@kernel.org>
From: Johan Jonker <jbx6244@gmail.com>
[ Upstream commit f051b6ace7ffcc48d6d1017191f167c0a85799f6 ]
Fix rk3399 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/a6ab6f75-3b80-40b1-bd30-3113e14becdd@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 4a3d0af5ecfe2..fb1ea84c2b14f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1953,6 +1953,7 @@ simple-audio-card,codec {
hdmi: hdmi@ff940000 {
compatible = "rockchip,rk3399-dw-hdmi";
reg = <0x0 0xff940000 0x0 0x20000>;
+ reg-io-width = <4>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru PCLK_HDMI_CTRL>,
<&cru SCLK_HDMI_SFR>,
@@ -1961,13 +1962,16 @@ hdmi: hdmi@ff940000 {
<&cru PLL_VPLL>;
clock-names = "iahb", "isfr", "cec", "grf", "ref";
power-domains = <&power RK3399_PD_HDCP>;
- reg-io-width = <4>;
rockchip,grf = <&grf>;
#sound-dai-cells = <0>;
status = "disabled";
ports {
- hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1980,6 +1984,10 @@ hdmi_in_vopl: endpoint@1 {
remote-endpoint = <&vopl_out_hdmi>;
};
};
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
};
};
--
2.43.0
^ permalink raw reply related
* [PATCH AUTOSEL 6.6 25/75] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names
From: Sasha Levin @ 2024-03-29 12:42 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Krzysztof Kozlowski, Bjorn Andersson, Sasha Levin, konrad.dybcio,
robh, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree
In-Reply-To: <20240329124330.3089520-1-sashal@kernel.org>
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ Upstream commit 61474b18e762671a69b2df9665f3cec5c87a38af ]
Correct the TLMM pin configuration and muxing node names used for DMIC2
and DMIC3 (dmic01 -> dmic23). This has no functional impact, but
improves code readability and avoids any confusion when reading the DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212172335.124845-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 2 +-
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index f2055899ae7ae..4669af3fdb75e 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -1201,7 +1201,7 @@ &usb_1_role_switch {
};
&vamacro {
- pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
+ pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
pinctrl-names = "default";
vdd-micb-supply = <&vreg_s10b>;
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index b8081513176ac..f4dbb69b4ff37 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -2977,7 +2977,7 @@ data-pins {
};
};
- dmic02_default: dmic02-default-state {
+ dmic23_default: dmic23-default-state {
clk-pins {
pins = "gpio8";
function = "dmic2_clk";
@@ -2993,7 +2993,7 @@ data-pins {
};
};
- dmic02_sleep: dmic02-sleep-state {
+ dmic23_sleep: dmic23-sleep-state {
clk-pins {
pins = "gpio8";
function = "dmic2_clk";
--
2.43.0
^ permalink raw reply related
* [PATCH AUTOSEL 6.6 26/75] arm64: dts: sm8450: correct DMIC2 and DMIC3 pin config node names
From: Sasha Levin @ 2024-03-29 12:42 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Krzysztof Kozlowski, Bjorn Andersson, Sasha Levin, konrad.dybcio,
robh, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree
In-Reply-To: <20240329124330.3089520-1-sashal@kernel.org>
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ Upstream commit 0d3eb7ff1f3a994a5b3e49a9bd48f0c2f3c80ef5 ]
Correct the TLMM pin configuration and muxing node names used for DMIC2
and DMIC3 (dmic01 -> dmic23). This has no functional impact, but
improves code readability and avoids any confusion when reading the DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212172335.124845-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 2 +-
arch/arm64/boot/dts/qcom/sm8450.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index bd5e8181f2aa0..c1f58449f08c7 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -1129,7 +1129,7 @@ &usb_1_qmpphy_usb_ss_in {
};
&vamacro {
- pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
+ pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
pinctrl-names = "default";
vdd-micb-supply = <&vreg_s10b_1p8>;
qcom,dmic-sample-rate = <600000>;
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 91d856e5b06b5..77c90b3c616b6 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -3755,7 +3755,7 @@ data-pins {
};
};
- dmic02_default: dmic02-default-state {
+ dmic23_default: dmic23-default-state {
clk-pins {
pins = "gpio8";
function = "dmic2_clk";
--
2.43.0
^ permalink raw reply related
* [PATCH AUTOSEL 6.6 27/75] arm64: dts: sm8550: correct DMIC2 and DMIC3 pin config node names
From: Sasha Levin @ 2024-03-29 12:42 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Krzysztof Kozlowski, Neil Armstrong, Bjorn Andersson, Sasha Levin,
konrad.dybcio, robh, krzysztof.kozlowski+dt, conor+dt,
linux-arm-msm, devicetree
In-Reply-To: <20240329124330.3089520-1-sashal@kernel.org>
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ Upstream commit c6e5bf9278749eaa094dc944add747f10a15dceb ]
Correct the TLMM pin configuration and muxing node names used for DMIC2
and DMIC3 (dmic01 -> dmic23). This has no functional impact, but
improves code readability and avoids any confusion when reading the DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240212172335.124845-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8550.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 076715ef09d56..48c7dcca62764 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -2290,7 +2290,7 @@ data-pins {
};
};
- dmic02_default: dmic02-default-state {
+ dmic23_default: dmic23-default-state {
clk-pins {
pins = "gpio8";
function = "dmic2_clk";
--
2.43.0
^ permalink raw reply related
* [PATCH AUTOSEL 6.1 04/52] arm64: dts: qcom: sdm630: add USB QMP PHY support
From: Sasha Levin @ 2024-03-29 12:44 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Dmitry Baryshkov, Konrad Dybcio, Bjorn Andersson, Sasha Levin,
robh, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree
In-Reply-To: <20240329124605.3091273-1-sashal@kernel.org>
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit bb5009a24ec3f2f2ec1e2ed7b8a5dcde9a9e28d9 ]
Define USB3 QMP PHY presend on the SDM630 / SDM660 platforms. Enable it by
default in the USB3 host, but (for compatibility), force USB 2.0 mode
for all defined boards. The boards should opt-in to enable USB 3.0
support.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240116-sdm660-usb3-support-v1-3-2fbd683aea77@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../boot/dts/qcom/sda660-inforce-ifc6560.dts | 6 ++++
.../dts/qcom/sdm630-sony-xperia-nile.dtsi | 6 ++++
arch/arm64/boot/dts/qcom/sdm630.dtsi | 36 ++++++++++++++-----
.../boot/dts/qcom/sdm660-xiaomi-lavender.dts | 6 ++++
4 files changed, 46 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
index 28050bc5f0813..f824036871cc1 100644
--- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
+++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -452,10 +452,16 @@ &usb2_dwc3 {
};
&usb3 {
+ qcom,select-utmi-as-pipe-clk;
+
status = "okay";
};
&usb3_dwc3 {
+ maximum-speed = "high-speed";
+ phys = <&qusb2phy0>;
+ phy-names = "usb2-phy";
+
dr_mode = "peripheral";
extcon = <&extcon_usb>;
};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index 09c07800793a0..dd1d7e738c8da 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -650,10 +650,16 @@ cam_vdig_default: cam-vdig-default {
};
&usb3 {
+ qcom,select-utmi-as-pipe-clk;
+
status = "okay";
};
&usb3_dwc3 {
+ maximum-speed = "high-speed";
+ phys = <&qusb2phy0>;
+ phy-names = "usb2-phy";
+
dr_mode = "peripheral";
extcon = <&extcon_usb>;
};
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 2430549265d3f..1d18c85c5c5b0 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -1233,7 +1233,6 @@ usb3: usb@a8f8800 {
interrupt-names = "hs_phy_irq", "ss_phy_irq";
power-domains = <&gcc USB_30_GDSC>;
- qcom,select-utmi-as-pipe-clk;
resets = <&gcc GCC_USB_30_BCR>;
@@ -1244,17 +1243,38 @@ usb3_dwc3: usb@a800000 {
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- /*
- * SDM630 technically supports USB3 but I
- * haven't seen any devices making use of it.
- */
- maximum-speed = "high-speed";
- phys = <&qusb2phy0>;
- phy-names = "usb2-phy";
+ phys = <&qusb2phy0>, <&usb3_qmpphy>;
+ phy-names = "usb2-phy", "usb3-phy";
snps,hird-threshold = /bits/ 8 <0>;
};
};
+ usb3_qmpphy: phy@c010000 {
+ compatible = "qcom,sdm660-qmp-usb3-phy";
+ reg = <0x0c010000 0x1000>;
+
+ clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB3_CLKREF_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+
+ resets = <&gcc GCC_USB3_PHY_BCR>,
+ <&gcc GCC_USB3PHY_PHY_BCR>;
+ reset-names = "phy",
+ "phy_phy";
+
+ qcom,tcsr-reg = <&tcsr_regs_1 0x6b244>;
+
+ status = "disabled";
+ };
+
qusb2phy0: phy@c012000 {
compatible = "qcom,sdm660-qusb2-phy";
reg = <0x0c012000 0x180>;
diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
index a3559f6e34a5e..308f9786a648e 100644
--- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
+++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -411,10 +411,16 @@ &tlmm {
};
&usb3 {
+ qcom,select-utmi-as-pipe-clk;
+
status = "okay";
};
&usb3_dwc3 {
+ maximum-speed = "high-speed";
+ phys = <&qusb2phy0>;
+ phy-names = "usb2-phy";
+
dr_mode = "peripheral";
extcon = <&extcon_usb>;
};
--
2.43.0
^ permalink raw reply related
* [PATCH AUTOSEL 6.1 05/52] arm64: dts: qcom: sda660-ifc6560: enable USB 3.0 PHY
From: Sasha Levin @ 2024-03-29 12:44 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Dmitry Baryshkov, Bjorn Andersson, Sasha Levin, konrad.dybcio,
robh, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree
In-Reply-To: <20240329124605.3091273-1-sashal@kernel.org>
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 319a12e7c399df4316f54f6cc83cd6cdffb4ec4a ]
The Inforce IFC6560 board actually has USB SS lines routed to the USB-C
connector. Enable USB 3.0 PHY and SS mode for the USB3 host.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240116-sdm660-usb3-support-v1-4-2fbd683aea77@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
index f824036871cc1..2128a90e7ef97 100644
--- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
+++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -452,16 +452,15 @@ &usb2_dwc3 {
};
&usb3 {
- qcom,select-utmi-as-pipe-clk;
-
status = "okay";
};
&usb3_dwc3 {
- maximum-speed = "high-speed";
- phys = <&qusb2phy0>;
- phy-names = "usb2-phy";
-
dr_mode = "peripheral";
extcon = <&extcon_usb>;
};
+
+&usb3_qmpphy {
+ vdda-phy-supply = <&vreg_l1b_0p925>;
+ status = "okay";
+};
--
2.43.0
^ permalink raw reply related
* [PATCH AUTOSEL 6.1 15/52] arm64: dts: rockchip: fix rk3328 hdmi ports node
From: Sasha Levin @ 2024-03-29 12:45 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Johan Jonker, Heiko Stuebner, Sasha Levin, robh,
krzysztof.kozlowski+dt, conor+dt, dsimic, jonas, shironeko,
devicetree, linux-arm-kernel, linux-rockchip
In-Reply-To: <20240329124605.3091273-1-sashal@kernel.org>
From: Johan Jonker <jbx6244@gmail.com>
[ Upstream commit 1d00ba4700d1e0f88ae70d028d2e17e39078fa1c ]
Fix rk3328 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/e5dea3b7-bf84-4474-9530-cc2da3c41104@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 905a50aa5dc38..d42846efff2fe 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -741,11 +741,20 @@ hdmi: hdmi@ff3c0000 {
status = "disabled";
ports {
- hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
+
hdmi_in_vop: endpoint {
remote-endpoint = <&vop_out_hdmi>;
};
};
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
};
};
--
2.43.0
^ permalink raw reply related
* [PATCH AUTOSEL 6.1 16/52] arm64: dts: rockchip: fix rk3399 hdmi ports node
From: Sasha Levin @ 2024-03-29 12:45 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Johan Jonker, Heiko Stuebner, Sasha Levin, robh,
krzysztof.kozlowski+dt, conor+dt, dsimic, knaerzche, jay.xu,
rick.wertenbroek, chris.obbard, s.hauer, devicetree,
linux-arm-kernel, linux-rockchip
In-Reply-To: <20240329124605.3091273-1-sashal@kernel.org>
From: Johan Jonker <jbx6244@gmail.com>
[ Upstream commit f051b6ace7ffcc48d6d1017191f167c0a85799f6 ]
Fix rk3399 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/a6ab6f75-3b80-40b1-bd30-3113e14becdd@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index a7e6eccb14cc6..8363cc13ec517 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1906,6 +1906,7 @@ simple-audio-card,codec {
hdmi: hdmi@ff940000 {
compatible = "rockchip,rk3399-dw-hdmi";
reg = <0x0 0xff940000 0x0 0x20000>;
+ reg-io-width = <4>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru PCLK_HDMI_CTRL>,
<&cru SCLK_HDMI_SFR>,
@@ -1914,13 +1915,16 @@ hdmi: hdmi@ff940000 {
<&cru PLL_VPLL>;
clock-names = "iahb", "isfr", "cec", "grf", "ref";
power-domains = <&power RK3399_PD_HDCP>;
- reg-io-width = <4>;
rockchip,grf = <&grf>;
#sound-dai-cells = <0>;
status = "disabled";
ports {
- hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1933,6 +1937,10 @@ hdmi_in_vopl: endpoint@1 {
remote-endpoint = <&vopl_out_hdmi>;
};
};
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
};
};
--
2.43.0
^ permalink raw reply related
* [PATCH AUTOSEL 5.15 10/34] arm64: dts: rockchip: fix rk3328 hdmi ports node
From: Sasha Levin @ 2024-03-29 12:47 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Johan Jonker, Heiko Stuebner, Sasha Levin, robh,
krzysztof.kozlowski+dt, conor+dt, dsimic, jay.xu, shironeko,
jonas, devicetree, linux-arm-kernel, linux-rockchip
In-Reply-To: <20240329124750.3092394-1-sashal@kernel.org>
From: Johan Jonker <jbx6244@gmail.com>
[ Upstream commit 1d00ba4700d1e0f88ae70d028d2e17e39078fa1c ]
Fix rk3328 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/e5dea3b7-bf84-4474-9530-cc2da3c41104@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 3cbe83e6fb9a4..26f02cc70dc5d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -728,11 +728,20 @@ hdmi: hdmi@ff3c0000 {
status = "disabled";
ports {
- hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
+
hdmi_in_vop: endpoint {
remote-endpoint = <&vop_out_hdmi>;
};
};
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
};
};
--
2.43.0
^ permalink raw reply related
* [PATCH AUTOSEL 5.15 11/34] arm64: dts: rockchip: fix rk3399 hdmi ports node
From: Sasha Levin @ 2024-03-29 12:47 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Johan Jonker, Heiko Stuebner, Sasha Levin, robh,
krzysztof.kozlowski+dt, conor+dt, dsimic, knaerzche, jonas,
chris.obbard, quentin.schulz, rick.wertenbroek, s.hauer,
devicetree, linux-arm-kernel, linux-rockchip
In-Reply-To: <20240329124750.3092394-1-sashal@kernel.org>
From: Johan Jonker <jbx6244@gmail.com>
[ Upstream commit f051b6ace7ffcc48d6d1017191f167c0a85799f6 ]
Fix rk3399 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/a6ab6f75-3b80-40b1-bd30-3113e14becdd@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 9e33f0e6ed504..e98966899f53c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1801,6 +1801,7 @@ simple-audio-card,codec {
hdmi: hdmi@ff940000 {
compatible = "rockchip,rk3399-dw-hdmi";
reg = <0x0 0xff940000 0x0 0x20000>;
+ reg-io-width = <4>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru PCLK_HDMI_CTRL>,
<&cru SCLK_HDMI_SFR>,
@@ -1809,13 +1810,16 @@ hdmi: hdmi@ff940000 {
<&cru PLL_VPLL>;
clock-names = "iahb", "isfr", "cec", "grf", "vpll";
power-domains = <&power RK3399_PD_HDCP>;
- reg-io-width = <4>;
rockchip,grf = <&grf>;
#sound-dai-cells = <0>;
status = "disabled";
ports {
- hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1828,6 +1832,10 @@ hdmi_in_vopl: endpoint@1 {
remote-endpoint = <&vopl_out_hdmi>;
};
};
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
};
};
--
2.43.0
^ permalink raw reply related
* [PATCH AUTOSEL 5.10 09/31] arm64: dts: rockchip: fix rk3328 hdmi ports node
From: Sasha Levin @ 2024-03-29 12:48 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Johan Jonker, Heiko Stuebner, Sasha Levin, robh,
krzysztof.kozlowski+dt, conor+dt, dsimic, jonas, shironeko,
devicetree, linux-arm-kernel, linux-rockchip
In-Reply-To: <20240329124903.3093161-1-sashal@kernel.org>
From: Johan Jonker <jbx6244@gmail.com>
[ Upstream commit 1d00ba4700d1e0f88ae70d028d2e17e39078fa1c ]
Fix rk3328 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/e5dea3b7-bf84-4474-9530-cc2da3c41104@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 72112fe05a5c4..10df6636a6b6c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -732,11 +732,20 @@ hdmi: hdmi@ff3c0000 {
status = "disabled";
ports {
- hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
+
hdmi_in_vop: endpoint {
remote-endpoint = <&vop_out_hdmi>;
};
};
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
};
};
--
2.43.0
^ permalink raw reply related
* [PATCH AUTOSEL 5.10 10/31] arm64: dts: rockchip: fix rk3399 hdmi ports node
From: Sasha Levin @ 2024-03-29 12:48 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Johan Jonker, Heiko Stuebner, Sasha Levin, robh,
krzysztof.kozlowski+dt, conor+dt, dsimic, s.hauer, jonas,
rick.wertenbroek, knaerzche, quentin.schulz, chris.obbard,
devicetree, linux-arm-kernel, linux-rockchip
In-Reply-To: <20240329124903.3093161-1-sashal@kernel.org>
From: Johan Jonker <jbx6244@gmail.com>
[ Upstream commit f051b6ace7ffcc48d6d1017191f167c0a85799f6 ]
Fix rk3399 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/a6ab6f75-3b80-40b1-bd30-3113e14becdd@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 3180f576ed02e..e2515218ff734 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1769,6 +1769,7 @@ simple-audio-card,codec {
hdmi: hdmi@ff940000 {
compatible = "rockchip,rk3399-dw-hdmi";
reg = <0x0 0xff940000 0x0 0x20000>;
+ reg-io-width = <4>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru PCLK_HDMI_CTRL>,
<&cru SCLK_HDMI_SFR>,
@@ -1777,13 +1778,16 @@ hdmi: hdmi@ff940000 {
<&cru PLL_VPLL>;
clock-names = "iahb", "isfr", "cec", "grf", "vpll";
power-domains = <&power RK3399_PD_HDCP>;
- reg-io-width = <4>;
rockchip,grf = <&grf>;
#sound-dai-cells = <0>;
status = "disabled";
ports {
- hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1796,6 +1800,10 @@ hdmi_in_vopl: endpoint@1 {
remote-endpoint = <&vopl_out_hdmi>;
};
};
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
};
};
--
2.43.0
^ permalink raw reply related
* [PATCH AUTOSEL 5.4 08/23] arm64: dts: rockchip: fix rk3328 hdmi ports node
From: Sasha Levin @ 2024-03-29 12:49 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Johan Jonker, Heiko Stuebner, Sasha Levin, robh,
krzysztof.kozlowski+dt, conor+dt, dsimic, jonas, jay.xu,
shironeko, devicetree, linux-arm-kernel, linux-rockchip
In-Reply-To: <20240329125009.3093845-1-sashal@kernel.org>
From: Johan Jonker <jbx6244@gmail.com>
[ Upstream commit 1d00ba4700d1e0f88ae70d028d2e17e39078fa1c ]
Fix rk3328 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/e5dea3b7-bf84-4474-9530-cc2da3c41104@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 6ddb6b8c1fad5..ef45d5607ea1f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -684,11 +684,20 @@ hdmi: hdmi@ff3c0000 {
status = "disabled";
ports {
- hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
+
hdmi_in_vop: endpoint {
remote-endpoint = <&vop_out_hdmi>;
};
};
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
};
};
--
2.43.0
^ permalink raw reply related
* [PATCH AUTOSEL 5.4 09/23] arm64: dts: rockchip: fix rk3399 hdmi ports node
From: Sasha Levin @ 2024-03-29 12:49 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Johan Jonker, Heiko Stuebner, Sasha Levin, robh,
krzysztof.kozlowski+dt, conor+dt, dsimic, rick.wertenbroek,
knaerzche, quentin.schulz, chris.obbard, s.hauer, devicetree,
linux-arm-kernel, linux-rockchip
In-Reply-To: <20240329125009.3093845-1-sashal@kernel.org>
From: Johan Jonker <jbx6244@gmail.com>
[ Upstream commit f051b6ace7ffcc48d6d1017191f167c0a85799f6 ]
Fix rk3399 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/a6ab6f75-3b80-40b1-bd30-3113e14becdd@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 4496f7e1c68f8..e5a25bc7d7997 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1743,6 +1743,7 @@ simple-audio-card,codec {
hdmi: hdmi@ff940000 {
compatible = "rockchip,rk3399-dw-hdmi";
reg = <0x0 0xff940000 0x0 0x20000>;
+ reg-io-width = <4>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru PCLK_HDMI_CTRL>,
<&cru SCLK_HDMI_SFR>,
@@ -1751,13 +1752,16 @@ hdmi: hdmi@ff940000 {
<&cru PLL_VPLL>;
clock-names = "iahb", "isfr", "cec", "grf", "vpll";
power-domains = <&power RK3399_PD_HDCP>;
- reg-io-width = <4>;
rockchip,grf = <&grf>;
#sound-dai-cells = <0>;
status = "disabled";
ports {
- hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1770,6 +1774,10 @@ hdmi_in_vopl: endpoint@1 {
remote-endpoint = <&vopl_out_hdmi>;
};
};
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
};
};
--
2.43.0
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 06/19] arm64: dts: rockchip: fix rk3399 hdmi ports node
From: Sasha Levin @ 2024-03-29 12:50 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Johan Jonker, Heiko Stuebner, Sasha Levin, robh,
krzysztof.kozlowski+dt, conor+dt, dsimic, kmcopper, lukasz.luba,
s.hauer, knaerzche, quentin.schulz, rick.wertenbroek,
chris.obbard, devicetree, linux-arm-kernel, linux-rockchip
In-Reply-To: <20240329125100.3094358-1-sashal@kernel.org>
From: Johan Jonker <jbx6244@gmail.com>
[ Upstream commit f051b6ace7ffcc48d6d1017191f167c0a85799f6 ]
Fix rk3399 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/a6ab6f75-3b80-40b1-bd30-3113e14becdd@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 5a60faa8e9998..f19d43021a4e7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1683,6 +1683,7 @@ simple-audio-card,codec {
hdmi: hdmi@ff940000 {
compatible = "rockchip,rk3399-dw-hdmi";
reg = <0x0 0xff940000 0x0 0x20000>;
+ reg-io-width = <4>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru PCLK_HDMI_CTRL>,
<&cru SCLK_HDMI_SFR>,
@@ -1691,13 +1692,16 @@ hdmi: hdmi@ff940000 {
<&cru PLL_VPLL>;
clock-names = "iahb", "isfr", "cec", "grf", "vpll";
power-domains = <&power RK3399_PD_HDCP>;
- reg-io-width = <4>;
rockchip,grf = <&grf>;
#sound-dai-cells = <0>;
status = "disabled";
ports {
- hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1710,6 +1714,10 @@ hdmi_in_vopl: endpoint@1 {
remote-endpoint = <&vopl_out_hdmi>;
};
};
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
};
};
--
2.43.0
^ permalink raw reply related
* Re: [RFC PATCH 0/2] Add gpio-usb-c-connector compatible
From: Dmitry Baryshkov @ 2024-03-29 12:53 UTC (permalink / raw)
To: Krishna Kurapati
Cc: Krzysztof Kozlowski, Rob Herring, Greg Kroah-Hartman,
Conor Dooley, Miquel Raynal, Guenter Roeck, Bjorn Helgaas,
Kyle Tso, Fabrice Gasnier, Heikki Krogerus, u.kleine-koenig,
AngeloGioacchino Del Regno, devicetree, linux-usb, linux-kernel,
quic_ppratap, quic_jackp
In-Reply-To: <20240329071948.3101882-1-quic_kriskura@quicinc.com>
On Fri, 29 Mar 2024 at 09:20, Krishna Kurapati
<quic_kriskura@quicinc.com> wrote:
>
> QDU1000 IDP [1] has a Type-c connector and supports USB 3.0.
> However it relies on usb-conn-gpio driver to read the vbus and id
> gpio's and provide role switch. However the driver currently has
> only gpio-b-connector compatible present in ID table. Adding that
> in DT would mean that the device supports Type-B connector and not
> Type-c connector. Thanks to Dmitry Baryshkov for pointing it out [2].
USB-B connector is pretty simple, it really has just an ID pin and
VBUS input, which translates to two GPIOs being routed from the
_connector_ itself.
USB-C is much more complicated, it has two CC pins and a VBus power
pin. It is not enough just to measure CC pin levels. Moreover,
properly handling USB 3.0 inside a USB-C connector requires a separate
'orientation' signal to tell the host which two lanes must be used for
the USB SS signals. Thus it is no longer possible to route just two
pins from the connector to the SoC.
Having all that in mind, I suspect that you are not describing your
hardware properly. I suppose that you have a Type-C port controller /
redriver / switch, which handles CC lines communication and then
provides ID / VBUS signals to the host. In such a case, please
describe this TCPC in the DT file and use its compatible string
instead of "gpio-c-connector".
>
> This series intends to add that compatible in driver and bindings
> so that it can be used in QDU1000 IDP DT.
>
> [1]: https://lore.kernel.org/all/20240319091020.15137-3-quic_kbajaj@quicinc.com/
> [2]: https://lore.kernel.org/all/CAA8EJprXPvji8TgZu1idH7y4GtHtD4VmQABFBcRt-9BQaCberg@mail.gmail.com/
>
> Krishna Kurapati (2):
> dt-bindings: connector: Add gpio-usb-c-connector compatible
> usb: common: usb-conn-gpio: Update ID table to add usb-c connector
>
> Documentation/devicetree/bindings/connector/usb-connector.yaml | 3 +++
> drivers/usb/common/usb-conn-gpio.c | 1 +
> 2 files changed, 4 insertions(+)
>
> --
> 2.34.1
>
--
With best wishes
Dmitry
^ permalink raw reply
* [PATCH 3/3] ARM: dts: Modify I2C bus configuration
From: Renze Nicolai @ 2024-03-29 13:01 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel, linux-aspeed, arnd,
olof, soc, robh+dt, krzysztof.kozlowski+dt, joel, andrew, renze
In-Reply-To: <20240329130152.878944-1-renze@rnplus.nl>
This commit enables I2C bus 8 which is exposed on the IPMB_1 connector on the X570D4U mainboard.
Additionally it adds a descriptive comment to I2C busses 1 and 5.
Signed-off-by: Renze Nicolai <renze@rnplus.nl>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
index e93c2f0b8414..3b1c77a12605 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -183,6 +183,7 @@ &i2c0 {
};
&i2c1 {
+ /* Hardware monitoring SMBus */
status = "okay";
w83773g@4c {
@@ -240,6 +241,7 @@ i2c4mux0ch3: i2c@3 {
};
&i2c5 {
+ /* SMBus on BMC connector (BMC_SMB_1) */
status = "okay";
};
@@ -264,6 +266,11 @@ eth1_macaddress: macaddress@3f88 {
};
};
+&i2c8 {
+ /* SMBus on intelligent platform management bus header (IPMB_1) */
+ status = "okay";
+};
+
&gfx {
status = "okay";
};
--
2.44.0
^ permalink raw reply related
* [PATCH 2/3] ARM: dts: Disable unused ADC channels for Asrock X570D4U BMC
From: Renze Nicolai @ 2024-03-29 13:01 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel, linux-aspeed, arnd,
olof, soc, robh+dt, krzysztof.kozlowski+dt, joel, andrew, renze
In-Reply-To: <20240329130152.878944-1-renze@rnplus.nl>
This commit disables unused ADC channels and labels the ADC channels used with their function.
Signed-off-by: Renze Nicolai <renze@rnplus.nl>
---
.../dts/aspeed/aspeed-bmc-asrock-x570d4u.dts | 29 +++++++++----------
1 file changed, 13 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
index 34bc382bf492..e93c2f0b8414 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -358,20 +358,17 @@ fan@5 {
&adc {
status = "okay";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_adc0_default
- &pinctrl_adc1_default
- &pinctrl_adc2_default
- &pinctrl_adc3_default
- &pinctrl_adc4_default
- &pinctrl_adc5_default
- &pinctrl_adc6_default
- &pinctrl_adc7_default
- &pinctrl_adc8_default
- &pinctrl_adc9_default
- &pinctrl_adc10_default
- &pinctrl_adc11_default
- &pinctrl_adc12_default
- &pinctrl_adc13_default
- &pinctrl_adc14_default
- &pinctrl_adc15_default>;
+ pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
+ &pinctrl_adc1_default /* 5VSB */
+ &pinctrl_adc2_default /* VCPU */
+ &pinctrl_adc3_default /* VSOC */
+ &pinctrl_adc4_default /* VCCM */
+ &pinctrl_adc5_default /* APU-VDDP */
+ &pinctrl_adc6_default /* PM-VDD-CLDO */
+ &pinctrl_adc7_default /* PM-VDDCR-S5 */
+ &pinctrl_adc8_default /* PM-VDDCR */
+ &pinctrl_adc9_default /* VBAT */
+ &pinctrl_adc10_default /* 3V */
+ &pinctrl_adc11_default /* 5V */
+ &pinctrl_adc12_default>; /* 12V */
};
--
2.44.0
^ permalink raw reply related
* Re: [PATCH AUTOSEL 6.1 04/52] arm64: dts: qcom: sdm630: add USB QMP PHY support
From: Konrad Dybcio @ 2024-03-29 13:16 UTC (permalink / raw)
To: Sasha Levin, linux-kernel, stable
Cc: Dmitry Baryshkov, Bjorn Andersson, robh, krzysztof.kozlowski+dt,
conor+dt, linux-arm-msm, devicetree
In-Reply-To: <20240329124605.3091273-4-sashal@kernel.org>
On 29.03.2024 1:44 PM, Sasha Levin wrote:
> From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>
> [ Upstream commit bb5009a24ec3f2f2ec1e2ed7b8a5dcde9a9e28d9 ]
>
> Define USB3 QMP PHY presend on the SDM630 / SDM660 platforms. Enable it by
> default in the USB3 host, but (for compatibility), force USB 2.0 mode
> for all defined boards. The boards should opt-in to enable USB 3.0
> support.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Link: https://lore.kernel.org/r/20240116-sdm660-usb3-support-v1-3-2fbd683aea77@linaro.org
> Signed-off-by: Bjorn Andersson <andersson@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
Hi, this depends on other kernel changes and can possibly regress something
if EPROBE_DEFER isn't handled correctly (because it will never probe)
Please drop it from all queues
Konrad
^ permalink raw reply
* [PATCH 1/3] ARM: dts: Modify GPIO table for Asrock X570D4U BMC
From: Renze Nicolai @ 2024-03-29 13:01 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel, linux-aspeed, arnd,
olof, soc, robh+dt, krzysztof.kozlowski+dt, joel, andrew, renze
In-Reply-To: <20240329130152.878944-1-renze@rnplus.nl>
This commit removes button-nmi-n, this board does not have support for an NMI button.
Input status-locatorled-n has been renamed to input-locatorled-n to better indicate the signal type.
The suffix -n has been appended to the name of control-locatorbutton, button-power, control-power, button-reset, control-reset, input-id0, input-id1, input-id2, output-bmc-ready to reflect the inverted signal polarity.
GPIO output-rtc-battery-voltage-read-enable has been renamed to output-hwm-vbat-enable, input-alert1-n to input-aux-smb-alert-n, input-alert3-n to input-psu-smb-alert-n, input-mfg to input-mfg-mode-n and input-caseopen to input-case-open-n.
And GPIOs input-bmc-smb-present-n, input-pcie-wake-n, input-sleep-s3-n, input-sleep-s5-n and input-power-good have been added.
Signed-off-by: Renze Nicolai <renze@rnplus.nl>
---
.../dts/aspeed/aspeed-bmc-asrock-x570d4u.dts | 116 +++++++++---------
1 file changed, 58 insertions(+), 58 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
index 3c975bc41ae7..34bc382bf492 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -79,64 +79,64 @@ iio-hwmon {
&gpio {
status = "okay";
gpio-line-names =
- /*A0-A3*/ "status-locatorled-n", "", "button-nmi-n", "",
- /*A4-A7*/ "", "", "", "",
- /*B0-B3*/ "input-bios-post-cmplt-n", "", "", "",
- /*B4-B7*/ "", "", "", "",
- /*C0-C3*/ "", "", "", "",
- /*C4-C7*/ "", "", "control-locatorbutton", "",
- /*D0-D3*/ "button-power", "control-power", "button-reset", "control-reset",
- /*D4-D7*/ "", "", "", "",
- /*E0-E3*/ "", "", "", "",
- /*E4-E7*/ "", "", "", "",
- /*F0-F3*/ "", "", "", "",
- /*F4-F7*/ "", "", "", "",
- /*G0-G3*/ "output-rtc-battery-voltage-read-enable", "input-id0", "input-id1", "input-id2",
- /*G4-G7*/ "input-alert1-n", "input-alert2-n", "input-alert3-n", "",
- /*H0-H3*/ "", "", "", "",
- /*H4-H7*/ "input-mfg", "", "led-heartbeat-n", "input-caseopen",
- /*I0-I3*/ "", "", "", "",
- /*I4-I7*/ "", "", "", "",
- /*J0-J3*/ "output-bmc-ready", "", "", "",
- /*J4-J7*/ "", "", "", "",
- /*K0-K3*/ "", "", "", "",
- /*K4-K7*/ "", "", "", "",
- /*L0-L3*/ "", "", "", "",
- /*L4-L7*/ "", "", "", "",
- /*M0-M3*/ "", "", "", "",
- /*M4-M7*/ "", "", "", "",
- /*N0-N3*/ "", "", "", "",
- /*N4-N7*/ "", "", "", "",
- /*O0-O3*/ "", "", "", "",
- /*O4-O7*/ "", "", "", "",
- /*P0-P3*/ "", "", "", "",
- /*P4-P7*/ "", "", "", "",
- /*Q0-Q3*/ "", "", "", "",
- /*Q4-Q7*/ "", "", "", "",
- /*R0-R3*/ "", "", "", "",
- /*R4-R7*/ "", "", "", "",
- /*S0-S3*/ "input-bmc-pchhot-n", "", "", "",
- /*S4-S7*/ "", "", "", "",
- /*T0-T3*/ "", "", "", "",
- /*T4-T7*/ "", "", "", "",
- /*U0-U3*/ "", "", "", "",
- /*U4-U7*/ "", "", "", "",
- /*V0-V3*/ "", "", "", "",
- /*V4-V7*/ "", "", "", "",
- /*W0-W3*/ "", "", "", "",
- /*W4-W7*/ "", "", "", "",
- /*X0-X3*/ "", "", "", "",
- /*X4-X7*/ "", "", "", "",
- /*Y0-Y3*/ "", "", "", "",
- /*Y4-Y7*/ "", "", "", "",
- /*Z0-Z3*/ "", "", "led-fault-n", "output-bmc-throttle-n",
- /*Z4-Z7*/ "", "", "", "",
- /*AA0-AA3*/ "input-cpu1-thermtrip-latch-n", "", "input-cpu1-prochot-n", "",
- /*AA4-AC7*/ "", "", "", "",
- /*AB0-AB3*/ "", "", "", "",
- /*AB4-AC7*/ "", "", "", "",
- /*AC0-AC3*/ "", "", "", "",
- /*AC4-AC7*/ "", "", "", "";
+ /*A0-A3*/ "input-locatorled-n", "", "", "",
+ /*A4-A7*/ "", "", "", "",
+ /*B0-B3*/ "input-bios-post-cmplt-n", "", "", "",
+ /*B4-B7*/ "", "", "", "",
+ /*C0-C3*/ "", "", "", "",
+ /*C4-C7*/ "", "", "control-locatorbutton-n", "",
+ /*D0-D3*/ "button-power-n", "control-power-n", "button-reset-n", "control-reset-n",
+ /*D4-D7*/ "", "", "", "",
+ /*E0-E3*/ "", "", "", "",
+ /*E4-E7*/ "", "", "", "",
+ /*F0-F3*/ "", "", "", "",
+ /*F4-F7*/ "", "", "", "",
+ /*G0-G3*/ "output-hwm-vbat-enable", "input-id0-n", "input-id1-n", "input-id2-n",
+ /*G4-G7*/ "input-aux-smb-alert-n", "", "input-psu-smb-alert-n", "",
+ /*H0-H3*/ "", "", "", "",
+ /*H4-H7*/ "input-mfg-mode-n", "", "led-heartbeat-n", "input-case-open-n",
+ /*I0-I3*/ "", "", "", "",
+ /*I4-I7*/ "", "", "", "",
+ /*J0-J3*/ "output-bmc-ready-n", "", "", "",
+ /*J4-J7*/ "", "", "", "",
+ /*K0-K3*/ "", "", "", "",
+ /*K4-K7*/ "", "", "", "",
+ /*L0-L3*/ "", "", "", "",
+ /*L4-L7*/ "", "", "", "",
+ /*M0-M3*/ "", "", "", "",
+ /*M4-M7*/ "", "", "", "",
+ /*N0-N3*/ "", "", "", "",
+ /*N4-N7*/ "", "", "", "",
+ /*O0-O3*/ "", "", "", "",
+ /*O4-O7*/ "", "", "", "",
+ /*P0-P3*/ "", "", "", "",
+ /*P4-P7*/ "", "", "", "",
+ /*Q0-Q3*/ "", "", "", "",
+ /*Q4-Q7*/ "input-bmc-smb-present-n", "", "", "input-pcie-wake-n",
+ /*R0-R3*/ "", "", "", "",
+ /*R4-R7*/ "", "", "", "",
+ /*S0-S3*/ "input-bmc-pchhot-n", "", "", "",
+ /*S4-S7*/ "", "", "", "",
+ /*T0-T3*/ "", "", "", "",
+ /*T4-T7*/ "", "", "", "",
+ /*U0-U3*/ "", "", "", "",
+ /*U4-U7*/ "", "", "", "",
+ /*V0-V3*/ "", "", "", "",
+ /*V4-V7*/ "", "", "", "",
+ /*W0-W3*/ "", "", "", "",
+ /*W4-W7*/ "", "", "", "",
+ /*X0-X3*/ "", "", "", "",
+ /*X4-X7*/ "", "", "", "",
+ /*Y0-Y3*/ "input-sleep-s3-n", "input-sleep-s5-n", "", "",
+ /*Y4-Y7*/ "", "", "", "",
+ /*Z0-Z3*/ "", "", "led-fault-n", "output-bmc-throttle-n",
+ /*Z4-Z7*/ "", "", "", "",
+ /*AA0-AA3*/ "input-cpu1-thermtrip-latch-n", "", "input-cpu1-prochot-n", "",
+ /*AA4-AC7*/ "", "", "", "",
+ /*AB0-AB3*/ "", "input-power-good", "", "",
+ /*AB4-AC7*/ "", "", "", "",
+ /*AC0-AC3*/ "", "", "", "",
+ /*AC4-AC7*/ "", "", "", "";
};
&fmc {
--
2.44.0
^ permalink raw reply related
* [PATCH 0/3] ARM: dts: Update devicetree of Asrock X570D4U BMC
From: Renze Nicolai @ 2024-03-29 13:01 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel, linux-aspeed, arnd,
olof, soc, robh+dt, krzysztof.kozlowski+dt, joel, andrew, renze
Hello,
These patches change the GPIO table, ADC channel configuration and
I2C bus configuration of the devicetree for the X570D4U BMC as part of
ongoing efforts to support OpenBMC on this platform.
Best regards,
Renze Nicolai
Renze Nicolai (3):
ARM: dts: Modify GPIO table for Asrock X570D4U BMC
ARM: dts: Disable unused ADC channels for Asrock X570D4U BMC
ARM: dts: Modify I2C bus configuration
.../dts/aspeed/aspeed-bmc-asrock-x570d4u.dts | 152 +++++++++---------
1 file changed, 78 insertions(+), 74 deletions(-)
--
2.44.0
^ permalink raw reply
* Re: [PATCH 13/13] ASoC: ti: davinci-i2s: Opitonally drive DX pin during capture streams
From: Bastien Curutchet @ 2024-03-29 13:24 UTC (permalink / raw)
To: Péter Ujfalusi, Liam Girdwood, Mark Brown, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jaroslav Kysela, Takashi Iwai
Cc: linux-sound, devicetree, linux-kernel, alsa-devel,
Thomas Petazzoni, herve.codina, christophercordahi
In-Reply-To: <16e6cded-33c1-408c-9bfc-b0b9a8da4cbf@bootlin.com>
Hi Péter,
>> Can you use aplay /dev/zero and a DT property to select T1 framing for
>> the playback? Or that would be too coarse for timing the start of
>> playback and capture?
>>
>
> That's a good idea, thank you. I'll try this and come back to you.
>
>
I tried it and it works fine, thank you.
We still need to run some performance tests before fully adopting it but
anyway I'll send a new iteration of the patch series that drops the
drive-dx part and just keeps a DT property to select T1 framing.
Best regards,
Bastien
^ permalink raw reply
* Re: 回复: [PATCH v2 1/2] ASoC: dt-bindings: Add bindings for Cadence I2S-MC controller
From: Mark Brown @ 2024-03-29 13:36 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Xingyu Wu, Liam Girdwood, Claudiu Beznea, Jaroslav Kysela,
Takashi Iwai, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
alsa-devel@alsa-project.org, linux-sound@vger.kernel.org
In-Reply-To: <7b4a35d0-6764-4c6a-9f1d-57481324c680@linaro.org>
[-- Attachment #1: Type: text/plain, Size: 577 bytes --]
On Fri, Mar 29, 2024 at 12:42:22PM +0100, Krzysztof Kozlowski wrote:
> I stated and I keep my statement that such block is usually not usable
> on its own and always needs some sort of quirks or SoC-specific
> implementation. At least this is what I saw in other similar cases, but
> not exactly I2S.
I wouldn't be so pessimistic, especially not for I2S - a good portion of
quirks there are extra features rather than things needed for basic
operation, a lot of things that might in the past have been quirks for
basic operation are these days hidden behind the DT bindings.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply
* Re: [PATCH v6 0/2] ASoC: nau8325: Modify driver code and dtschema.
From: Mark Brown @ 2024-03-29 13:44 UTC (permalink / raw)
To: Seven Lee
Cc: lgirdwood, alsa-devel, devicetree, linux-sound,
krzysztof.kozlowski+dt, linux-kernel, robh+dt, conor+dt, perex,
tiwai, YHCHuang, KCHSU0, CTLIN0, SJLIN0, scott6986,
supercraig0719, dardar923
In-Reply-To: <20240329085402.3424749-1-wtli@nuvoton.com>
[-- Attachment #1: Type: text/plain, Size: 356 bytes --]
On Fri, Mar 29, 2024 at 04:54:00PM +0800, Seven Lee wrote:
> Revise properties description and use standard units in dtschema.
> The unit conversion driver based on the attribute must also be
> changed accordingly.
My applying the prior version raced with you sending this new one, could
you please send incremental patches with the changes from your v6?
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox