* Re: [PATCH v3 8/9] arm64: dts: qcom: x1e80100: describe USB signals properly
From: Konrad Dybcio @ 2024-04-02 14:41 UTC (permalink / raw)
To: Dmitry Baryshkov, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Bryan O'Donoghue
Cc: linux-arm-msm, devicetree, linux-kernel, Luca Weiss
In-Reply-To: <20240401-typec-fix-sm8250-v3-8-604dce3ad103@linaro.org>
On 1.04.2024 10:33 PM, Dmitry Baryshkov wrote:
> Follow example of other platforms. Rename HS graph nodes to contain
> 'dwc3_hs' and link SS lanes from DWC3 controllers to QMP PHYs.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/x1e80100.dtsi | 149 +++++++++++++++++++++++++++++++--
> 1 file changed, 141 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> index f5a3b39ae70e..3213eccc3a3a 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> @@ -2543,6 +2543,33 @@ usb_1_ss0_qmpphy: phy@fd5000 {
> #phy-cells = <1>;
>
> status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + usb_1_ss0_qmpphy_out: endpoint {
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + usb_1_ss0_qmpphy_usb_ss_in: endpoint {
> + remote-endpoint = <&usb_1_ss0_dwc3_ss>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> +
> + usb_1_ss0_qmpphy_dp_in: endpoint {
This is more than just DP AFAIU, please call it SBU
Konrad
^ permalink raw reply
* Re: [PATCH v3 7/9] arm64: dts: qcom: sc8280xp: describe USB signals properly
From: Konrad Dybcio @ 2024-04-02 14:40 UTC (permalink / raw)
To: Dmitry Baryshkov, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Bryan O'Donoghue
Cc: linux-arm-msm, devicetree, linux-kernel, Luca Weiss
In-Reply-To: <20240401-typec-fix-sm8250-v3-7-604dce3ad103@linaro.org>
On 1.04.2024 10:33 PM, Dmitry Baryshkov wrote:
> Follow example of other platforms. Rename HS graph nodes to contain
> 'dwc3_hs' and link SS lanes from DWC3 controllers to QMP PHYs.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply
* Re: [Patch v2 1/2] dt-bindings: make sid and broadcast reg optional
From: Rob Herring @ 2024-04-02 14:40 UTC (permalink / raw)
To: Sumit Gupta
Cc: amhetre, conor+dt, maz, mark.rutland, treding, devicetree, bbasu,
jonathanh, linux-kernel, linux-tegra, krzysztof.kozlowski
In-Reply-To: <20240402132626.24693-2-sumitg@nvidia.com>
On Tue, 02 Apr 2024 18:56:25 +0530, Sumit Gupta wrote:
> MC SID and Broadbast channel register access is restricted for Guest VM.
> Make both the regions as optional for SoC's from Tegra186 onwards.
> Tegra MC driver will skip access to the restricted registers from Guest
> if the respective regions are not present in the memory-controller node
> of Guest DT.
>
> Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
> ---
> .../memory-controllers/nvidia,tegra186-mc.yaml | 18 +++++++++---------
> 1 file changed, 9 insertions(+), 9 deletions(-)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.example.dtb: memory-controller@2c00000: reg: [[0, 46137344, 0, 65536], [0, 46202880, 0, 65536], [0, 46268416, 0, 65536], [0, 46333952, 0, 65536], [0, 46399488, 0, 65536], [0, 46465024, 0, 65536]] is too long
from schema $id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra186-mc.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.example.dtb: memory-controller@2c00000: reg-names:0: 'ch0' was expected
from schema $id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra186-mc.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.example.dtb: memory-controller@2c00000: reg-names:1: 'ch1' was expected
from schema $id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra186-mc.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.example.dtb: memory-controller@2c00000: reg-names:2: 'ch2' was expected
from schema $id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra186-mc.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.example.dtb: memory-controller@2c00000: reg-names:3: 'ch3' was expected
from schema $id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra186-mc.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.example.dtb: memory-controller@2c00000: reg-names:4: 'sid' was expected
from schema $id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra186-mc.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.example.dtb: memory-controller@2c00000: reg-names:5: 'broadcast' was expected
from schema $id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra186-mc.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240402132626.24693-2-sumitg@nvidia.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
^ permalink raw reply
* Re: [PATCH v3 6/9] arm64: dts: qcom: sc8180x: describe USB signals properly
From: Konrad Dybcio @ 2024-04-02 14:39 UTC (permalink / raw)
To: Dmitry Baryshkov, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Bryan O'Donoghue
Cc: linux-arm-msm, devicetree, linux-kernel, Luca Weiss
In-Reply-To: <20240401-typec-fix-sm8250-v3-6-604dce3ad103@linaro.org>
On 1.04.2024 10:33 PM, Dmitry Baryshkov wrote:
> Follow example of other platforms. Rename HS graph nodes to contain
> 'dwc3_hs' and link SS lanes from DWC3 controllers to QMP PHYs.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply
* Re: [PATCH v3 4/9] arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY
From: Konrad Dybcio @ 2024-04-02 14:39 UTC (permalink / raw)
To: Dmitry Baryshkov, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Bryan O'Donoghue
Cc: linux-arm-msm, devicetree, linux-kernel, Luca Weiss
In-Reply-To: <20240401-typec-fix-sm8250-v3-4-604dce3ad103@linaro.org>
On 1.04.2024 10:33 PM, Dmitry Baryshkov wrote:
> The SuperSpeed signals originate from the DWC3 host controller and then
> are routed through the Combo QMP PHY, where they are multiplexed with
> the DisplayPort signals. Add corresponding OF graph link.
>
> Reported-by: Luca Weiss <luca.weiss@fairphone.com>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply
* Re: [PATCH v3 3/9] arm64: dts: qcom: sm8250: describe HS signals properly
From: Konrad Dybcio @ 2024-04-02 14:39 UTC (permalink / raw)
To: Dmitry Baryshkov, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Bryan O'Donoghue
Cc: linux-arm-msm, devicetree, linux-kernel, Luca Weiss
In-Reply-To: <20240401-typec-fix-sm8250-v3-3-604dce3ad103@linaro.org>
On 1.04.2024 10:33 PM, Dmitry Baryshkov wrote:
> The OF graph should describe physical signals. There is no 'role switch'
> signal between Type-C connector and the DWC3 USB controller. Instead
> there is a HighSpeed signal lane between DWC3 controller and the USB-C
> connector. Rename endpoints in accordance to that (this follows the
> example lead by other plaforms, including QRB2210 RB1, QRB4210 RB2 and
> all PMIC GLINK platforms).
>
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Hot discussions aside, this is consistent with bindings, so:
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply
* Re: [PATCH v4 1/4] dt-bindings: arm: fsl: add NXP S32G3 board
From: Shawn Guo @ 2024-04-02 14:34 UTC (permalink / raw)
To: Wadim Mueller
Cc: Krzysztof Kozlowski, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Ulf Hansson, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Greg Kroah-Hartman, Jiri Slaby, Chester Lin, Andreas Färber,
Matthias Brugger, NXP S32 Linux Team, Tim Harvey, Alexander Stein,
Marek Vasut, Gregor Herburger, Hugo Villeneuve,
Joao Paulo Goncalves, Markus Niebel, Marco Felsch,
Matthias Schiffer, Stefan Wahren, Bjorn Helgaas, Josua Mayer,
Li Yang, devicetree, linux-kernel, linux-mmc, linux-arm-kernel,
linux-serial
In-Reply-To: <20240324214329.29988-2-wafgo01@gmail.com>
On Sun, Mar 24, 2024 at 10:43:23PM +0100, Wadim Mueller wrote:
> Add bindings for NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3) [1]
>
> [1]
> https://www.nxp.com/design/design-center/designs/s32g3-vehicle-networking-reference-design:S32G-VNP-RDB3
>
> Signed-off-by: Wadim Mueller <wafgo01@gmail.com>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Applied, thanks!
^ permalink raw reply
* [PATCH] dt-bindings: timer: renesas,tmu: Add R-Car V4M support
From: Geert Uytterhoeven @ 2024-04-02 14:37 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Laurent Pinchart
Cc: devicetree, linux-renesas-soc, linux-kernel, Geert Uytterhoeven
Document support for the Timer Unit (TMU) in the Renesas R-Car V4M
(R8A779H0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Documentation/devicetree/bindings/timer/renesas,tmu.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml
index 50b5225ceb10b64c..75b0e7c70b62c89f 100644
--- a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml
+++ b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml
@@ -50,6 +50,7 @@ properties:
- renesas,tmu-r8a779a0 # R-Car V3U
- renesas,tmu-r8a779f0 # R-Car S4-8
- renesas,tmu-r8a779g0 # R-Car V4H
+ - renesas,tmu-r8a779h0 # R-Car V4M
- const: renesas,tmu
reg:
--
2.34.1
^ permalink raw reply related
* Re: [PATCH 1/3] dt-bindings: leds: add LED_FUNCTION_FNLOCK
From: Gergo Koteles @ 2024-04-02 14:36 UTC (permalink / raw)
To: Krzysztof Kozlowski, Ike Panhc, Hans de Goede, Ilpo Järvinen,
Pavel Machek, Lee Jones, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: platform-driver-x86, linux-kernel, linux-leds, devicetree
In-Reply-To: <6b47886e-09ac-4cb9-ab53-ca64f5320005@linaro.org>
Hi Krzysztof,
On Tue, 2024-04-02 at 15:55 +0200, Krzysztof Kozlowski wrote:
>
> Do we really need to define all these possible LED functions? Please
> link to DTS user for this.
>
I think for userspace it's easier to support an LED with a specified
name than to use various sysfs attributes. LED devices are easy to find
because they available are in the /sys/class/leds/ directory.
So I think it's a good thing to define LED names somewhere.
J Luke missed this LED from /sys/class/leds/, that's where the idea
came from. The scrollock, numlock, capslock and kbd_backlight LEDs are
already exported.
https://github.com/tomsom/yoga-linux/issues/58#issuecomment-2029926094
Best regards,
Gergo
^ permalink raw reply
* [PATCH] dt-bindings: timer: renesas,cmt: Add R-Car V4M support
From: Geert Uytterhoeven @ 2024-04-02 14:36 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Laurent Pinchart
Cc: devicetree, linux-renesas-soc, linux-kernel, Geert Uytterhoeven
Document support for the Compare Match Timer Type0 (CMT0) and Type1
(CMT1) in the Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Documentation/devicetree/bindings/timer/renesas,cmt.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml
index a0be1755ea28b996..5e09c04da30e47d5 100644
--- a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml
+++ b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml
@@ -103,6 +103,7 @@ properties:
- renesas,r8a779a0-cmt0 # 32-bit CMT0 on R-Car V3U
- renesas,r8a779f0-cmt0 # 32-bit CMT0 on R-Car S4-8
- renesas,r8a779g0-cmt0 # 32-bit CMT0 on R-Car V4H
+ - renesas,r8a779h0-cmt0 # 32-bit CMT0 on R-Car V4M
- const: renesas,rcar-gen4-cmt0 # 32-bit CMT0 on R-Car Gen4
- items:
@@ -110,6 +111,7 @@ properties:
- renesas,r8a779a0-cmt1 # 48-bit CMT on R-Car V3U
- renesas,r8a779f0-cmt1 # 48-bit CMT on R-Car S4-8
- renesas,r8a779g0-cmt1 # 48-bit CMT on R-Car V4H
+ - renesas,r8a779h0-cmt1 # 48-bit CMT on R-Car V4M
- const: renesas,rcar-gen4-cmt1 # 48-bit CMT on R-Car Gen4
reg:
--
2.34.1
^ permalink raw reply related
* Re: [PATCH v7 3/4] ASoc: PCM6240: Add compile item for PCM6240 Family driver
From: Dan Carpenter @ 2024-04-02 14:35 UTC (permalink / raw)
To: oe-kbuild, Shenghao Ding, linux-kernel
Cc: lkp, oe-kbuild-all, lgirdwood, broonie, robh+dt,
krzysztof.kozlowski+dt, conor+dt, linux-sound, devicetree, perex,
tiwai, 13916275206, mohit.chawla, soyer, jkhuang3, tiwai,
pdjuandi, manisha.agrawal, s-hari, aviel, hnagalla, praneeth,
Baojun.Xu, Shenghao Ding
In-Reply-To: <20240331021835.1470-4-shenghao-ding@ti.com>
Hi Shenghao,
kernel test robot noticed the following build warnings:
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Shenghao-Ding/ASoc-PCM6240-Create-PCM6240-Family-driver-code/20240331-102303
base: v6.9-rc1
patch link: https://lore.kernel.org/r/20240331021835.1470-4-shenghao-ding%40ti.com
patch subject: [PATCH v7 3/4] ASoc: PCM6240: Add compile item for PCM6240 Family driver
config: um-randconfig-r081-20240402 (https://download.01.org/0day-ci/archive/20240402/202404021225.mx5KlUlV-lkp@intel.com/config)
compiler: gcc-7 (Ubuntu 7.5.0-6ubuntu2) 7.5.0
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
| Closes: https://lore.kernel.org/r/202404021225.mx5KlUlV-lkp@intel.com/
smatch warnings:
sound/soc/codecs/pcm6240.c:1715 pcmdevice_process_block() warn: inconsistent indenting
vim +/fw_entry +1577 sound/soc/codecs/pcm6240.c
051d749b6eaeb0 Shenghao Ding 2024-03-31 1619 static int pcmdevice_process_block(void *ctxt, unsigned char *data,
051d749b6eaeb0 Shenghao Ding 2024-03-31 1620 unsigned char dev_idx, int sublocksize)
051d749b6eaeb0 Shenghao Ding 2024-03-31 1621 {
051d749b6eaeb0 Shenghao Ding 2024-03-31 1622 struct pcmdevice_priv *pcm_dev = (struct pcmdevice_priv *)ctxt;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1623 int subblk_offset = 2, chn, chnend, ret;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1624 unsigned char subblk_typ = data[1];
051d749b6eaeb0 Shenghao Ding 2024-03-31 1625
051d749b6eaeb0 Shenghao Ding 2024-03-31 1626 if (dev_idx) {
051d749b6eaeb0 Shenghao Ding 2024-03-31 1627 chn = dev_idx - 1;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1628 chnend = dev_idx;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1629 } else {
051d749b6eaeb0 Shenghao Ding 2024-03-31 1630 chn = 0;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1631 chnend = pcm_dev->ndev;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1632 }
051d749b6eaeb0 Shenghao Ding 2024-03-31 1633
051d749b6eaeb0 Shenghao Ding 2024-03-31 1634 for (; chn < chnend; chn++) {
051d749b6eaeb0 Shenghao Ding 2024-03-31 1635 switch (subblk_typ) {
051d749b6eaeb0 Shenghao Ding 2024-03-31 1636 case PCMDEVICE_CMD_SING_W: {
051d749b6eaeb0 Shenghao Ding 2024-03-31 1637 unsigned short len = get_unaligned_be16(&data[2]);
051d749b6eaeb0 Shenghao Ding 2024-03-31 1638 int i = 0;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1639
051d749b6eaeb0 Shenghao Ding 2024-03-31 1640 subblk_offset += 2;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1641 if (subblk_offset + 4 * len > sublocksize) {
051d749b6eaeb0 Shenghao Ding 2024-03-31 1642 dev_err(pcm_dev->dev,
051d749b6eaeb0 Shenghao Ding 2024-03-31 1643 "%s: byt wr out of boundary\n",
051d749b6eaeb0 Shenghao Ding 2024-03-31 1644 __func__);
051d749b6eaeb0 Shenghao Ding 2024-03-31 1645 break;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1646 }
051d749b6eaeb0 Shenghao Ding 2024-03-31 1647
051d749b6eaeb0 Shenghao Ding 2024-03-31 1648 for (i = 0; i < len; i++) {
051d749b6eaeb0 Shenghao Ding 2024-03-31 1649 ret = pcmdev_dev_write(pcm_dev, chn,
051d749b6eaeb0 Shenghao Ding 2024-03-31 1650 PCMDEVICE_REG(data[subblk_offset + 1],
051d749b6eaeb0 Shenghao Ding 2024-03-31 1651 data[subblk_offset + 2]),
051d749b6eaeb0 Shenghao Ding 2024-03-31 1652 data[subblk_offset + 3]);
051d749b6eaeb0 Shenghao Ding 2024-03-31 1653 if (ret < 0)
051d749b6eaeb0 Shenghao Ding 2024-03-31 1654 dev_err(pcm_dev->dev,
051d749b6eaeb0 Shenghao Ding 2024-03-31 1655 "%s: single write error\n",
051d749b6eaeb0 Shenghao Ding 2024-03-31 1656 __func__);
051d749b6eaeb0 Shenghao Ding 2024-03-31 1657
051d749b6eaeb0 Shenghao Ding 2024-03-31 1658 subblk_offset += 4;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1659 }
051d749b6eaeb0 Shenghao Ding 2024-03-31 1660 }
051d749b6eaeb0 Shenghao Ding 2024-03-31 1661 break;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1662 case PCMDEVICE_CMD_BURST: {
051d749b6eaeb0 Shenghao Ding 2024-03-31 1663 unsigned short len = get_unaligned_be16(&data[2]);
051d749b6eaeb0 Shenghao Ding 2024-03-31 1664
051d749b6eaeb0 Shenghao Ding 2024-03-31 1665 subblk_offset += 2;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1666 if (subblk_offset + 4 + len > sublocksize) {
051d749b6eaeb0 Shenghao Ding 2024-03-31 1667 dev_err(pcm_dev->dev,
051d749b6eaeb0 Shenghao Ding 2024-03-31 1668 "%s: burst Out of boundary\n",
051d749b6eaeb0 Shenghao Ding 2024-03-31 1669 __func__);
051d749b6eaeb0 Shenghao Ding 2024-03-31 1670 break;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1671 }
051d749b6eaeb0 Shenghao Ding 2024-03-31 1672 if (len % 4) {
051d749b6eaeb0 Shenghao Ding 2024-03-31 1673 dev_err(pcm_dev->dev,
051d749b6eaeb0 Shenghao Ding 2024-03-31 1674 "%s: burst-len(%u) not div by 4\n",
051d749b6eaeb0 Shenghao Ding 2024-03-31 1675 __func__, len);
051d749b6eaeb0 Shenghao Ding 2024-03-31 1676 break;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1677 }
051d749b6eaeb0 Shenghao Ding 2024-03-31 1678 ret = pcmdev_dev_bulk_write(pcm_dev, chn,
051d749b6eaeb0 Shenghao Ding 2024-03-31 1679 PCMDEVICE_REG(data[subblk_offset + 1],
051d749b6eaeb0 Shenghao Ding 2024-03-31 1680 data[subblk_offset + 2]),
051d749b6eaeb0 Shenghao Ding 2024-03-31 1681 &(data[subblk_offset + 4]), len);
051d749b6eaeb0 Shenghao Ding 2024-03-31 1682 if (ret < 0)
051d749b6eaeb0 Shenghao Ding 2024-03-31 1683 dev_err(pcm_dev->dev,
051d749b6eaeb0 Shenghao Ding 2024-03-31 1684 "%s: bulk_write err = %d\n",
051d749b6eaeb0 Shenghao Ding 2024-03-31 1685 __func__, ret);
051d749b6eaeb0 Shenghao Ding 2024-03-31 1686
051d749b6eaeb0 Shenghao Ding 2024-03-31 1687 subblk_offset += (len + 4);
051d749b6eaeb0 Shenghao Ding 2024-03-31 1688 }
051d749b6eaeb0 Shenghao Ding 2024-03-31 1689 break;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1690 case PCMDEVICE_CMD_DELAY: {
051d749b6eaeb0 Shenghao Ding 2024-03-31 1691 unsigned int delay_time = 0;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1692
051d749b6eaeb0 Shenghao Ding 2024-03-31 1693 if (subblk_offset + 2 > sublocksize) {
051d749b6eaeb0 Shenghao Ding 2024-03-31 1694 dev_err(pcm_dev->dev,
051d749b6eaeb0 Shenghao Ding 2024-03-31 1695 "%s: deley out of boundary\n",
051d749b6eaeb0 Shenghao Ding 2024-03-31 1696 __func__);
051d749b6eaeb0 Shenghao Ding 2024-03-31 1697 break;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1698 }
051d749b6eaeb0 Shenghao Ding 2024-03-31 1699 delay_time = get_unaligned_be16(&data[2]) * 1000;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1700 usleep_range(delay_time, delay_time + 50);
051d749b6eaeb0 Shenghao Ding 2024-03-31 1701 subblk_offset += 2;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1702 }
051d749b6eaeb0 Shenghao Ding 2024-03-31 1703 break;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1704 case PCMDEVICE_CMD_FIELD_W:
051d749b6eaeb0 Shenghao Ding 2024-03-31 1705 if (subblk_offset + 6 > sublocksize) {
051d749b6eaeb0 Shenghao Ding 2024-03-31 1706 dev_err(pcm_dev->dev,
051d749b6eaeb0 Shenghao Ding 2024-03-31 1707 "%s: bit write out of memory\n", __func__);
051d749b6eaeb0 Shenghao Ding 2024-03-31 1708 break;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1709 }
051d749b6eaeb0 Shenghao Ding 2024-03-31 1710 ret = pcmdev_dev_update_bits(pcm_dev, chn,
051d749b6eaeb0 Shenghao Ding 2024-03-31 1711 PCMDEVICE_REG(data[subblk_offset + 3],
051d749b6eaeb0 Shenghao Ding 2024-03-31 1712 data[subblk_offset + 4]),
051d749b6eaeb0 Shenghao Ding 2024-03-31 1713 data[subblk_offset + 1],
051d749b6eaeb0 Shenghao Ding 2024-03-31 1714 data[subblk_offset + 5]);
This line is indented too far.
051d749b6eaeb0 Shenghao Ding 2024-03-31 @1715 if (ret < 0)
051d749b6eaeb0 Shenghao Ding 2024-03-31 1716 dev_err(pcm_dev->dev, "%s: update_bits err = %d\n",
051d749b6eaeb0 Shenghao Ding 2024-03-31 1717 __func__, ret);
051d749b6eaeb0 Shenghao Ding 2024-03-31 1718
051d749b6eaeb0 Shenghao Ding 2024-03-31 1719 subblk_offset += 6;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1720 break;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1721 default:
051d749b6eaeb0 Shenghao Ding 2024-03-31 1722 break;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1723 }
051d749b6eaeb0 Shenghao Ding 2024-03-31 1724 }
051d749b6eaeb0 Shenghao Ding 2024-03-31 1725
051d749b6eaeb0 Shenghao Ding 2024-03-31 1726 return subblk_offset;
051d749b6eaeb0 Shenghao Ding 2024-03-31 1727 }
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
^ permalink raw reply
* RE: [PATCH v6 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
From: Peng Fan @ 2024-04-02 14:35 UTC (permalink / raw)
To: Andy Shevchenko, Cristian Marussi
Cc: Peng Fan (OSS), Sudeep Holla, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Linus Walleij, Dan Carpenter,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-gpio@vger.kernel.org, Oleksii Moisieiev
In-Reply-To: <DU0PR04MB94172B29B33AC0002CF6991B883E2@DU0PR04MB9417.eurprd04.prod.outlook.com>
Hi Andy,
> Subject: RE: [PATCH v6 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol
> protocol basic support
>
> > Subject: Re: [PATCH v6 3/4] firmware: arm_scmi: Add SCMI v3.2
> > pincontrol protocol basic support
> >
> > On Tue, Apr 2, 2024 at 10:48 AM Cristian Marussi
> > <cristian.marussi@arm.com> wrote:
> > > On Sun, Mar 31, 2024 at 01:44:28PM +0000, Peng Fan wrote:
> > > > > Sat, Mar 23, 2024 at 08:15:16PM +0800, Peng Fan (OSS) kirjoitti:
> >
> > ...
> >
> > > > > > +#include <linux/module.h>
> > > > > > +#include <linux/scmi_protocol.h> #include <linux/slab.h>
> > > > >
> > > > > This is semi-random list of headers. Please, follow IWYU
> > > > > principle (include what you use). There are a lot of inclusions
> > > > > I see missing (just in the context of this page I see bits.h,
> > > > > types.h, and
> > asm/byteorder.h).
> > > >
> > > > Is there any documentation about this requirement?
> > > > Some headers are already included by others.
> >
> > The documentation here is called "a common sense".
> > The C language is built like this and we expect that nobody will
> > invest into the dependency hell that we have already, that's why IWYU
> > principle, please follow it.
> >
> > > Andy made (mostly) the same remarks on this same patch ~1-year ago
> > > on this same patch while it was posted by Oleksii.
> > >
> > > And I told that time that most of the remarks around devm_ usage
> > > were wrong due to how the SCMI core handles protocol initialization
> > > (using a devres group transparently).
> > >
> > > This is what I answered that time.
> > >
> > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flo
> > > re
> > > .kernel.org%2Flinux-arm-kernel%2FZJ78hBcjAhiU%2BZBO%40e120937-
> > lin%2F%2
> > >
> >
> 3t&data=05%7C02%7Cpeng.fan%40nxp.com%7C3f8c12062db048608e2a08d
> > c5315bed
> > >
> >
> 0%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6384766000583
> > 40430%7CUn
> > >
> >
> known%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6I
> > k1haW
> > >
> >
> wiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=Whn3ehZjXy%2BcKG4irlWjQ6
> > K3HF%2FofD
> > > Yu7j0Lrm8dN5k%3D&reserved=0
> > >
> > > I wont repeat myself, but, in a nutshell the memory allocation like
> > > it is now is fine: a bit happens via devm_ at protocol
> > > initialization, the other is doe via explicit kmalloc at runtime and
> > > freed via kfree at remove time (if needed...i.e. checking the
> > > present flag of some
> > > structs)
> >
> > This sounds like a mess. devm_ is expected to be used only for the
> > ->probe() stage, otherwise you may consider cleanup.h (__free() macro)
> > to have automatic free at the paths where memory is not needed.
> >
> > And the function naming doesn't suggest that you have a probe-remove
> pair.
> > Moreover, if the init-deinit part is called in the probe-remove, the
> > devm_ must not be mixed with non-devm ones, as it breaks the order and
> > leads to subtle mistakes.
>
> I am new to __free() honestly. I'll let Cristian and Sudeep to comment on
> what should I do for v8.
Just give a look. But since most scmi firmware drivers are using
devm_x APIs in protocol init. I would follow the style to use
devm_x as of now.
And for pinctrl protocol deinit phase, I will add a comment on why
use kfree and what it is to free.
For the __free macro, people drop all the scmi firmware drivers
using devm_x APIs in init phase in a future patch.
Is this ok?
Thanks,
Peng.
>
> Thanks,
> Peng.
>
> >
> > > I'll made further remarks on v7 that you just posted.
> >
> > --
> > With Best Regards,
> > Andy Shevchenko
^ permalink raw reply
* [PATCH v3 11/11] PCI: imx6: Add i.MX8Q PCIe support
From: Frank Li @ 2024-04-02 14:33 UTC (permalink / raw)
To: Richard Zhu, Lucas Stach, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring, Bjorn Helgaas, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, Philipp Zabel, Liam Girdwood, Mark Brown,
Manivannan Sadhasivam, Krzysztof Kozlowski, Conor Dooley
Cc: linux-pci, imx, linux-arm-kernel, linux-kernel, bpf, devicetree,
Frank Li
In-Reply-To: <20240402-pci2_upstream-v3-0-803414bdb430@nxp.com>
From: Richard Zhu <hongxing.zhu@nxp.com>
Add i.MX8Q (i.MX8QM, i.MX8QXP and i.MX8DXL) PCIe support.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/pci/controller/dwc/pcie-imx.c | 54 +++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/drivers/pci/controller/dwc/pcie-imx.c b/drivers/pci/controller/dwc/pcie-imx.c
index 378808262d16b..af7c79e869e70 100644
--- a/drivers/pci/controller/dwc/pcie-imx.c
+++ b/drivers/pci/controller/dwc/pcie-imx.c
@@ -30,6 +30,7 @@
#include <linux/interrupt.h>
#include <linux/reset.h>
#include <linux/phy/phy.h>
+#include <linux/phy/pcie.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
@@ -81,6 +82,7 @@ enum imx_pcie_variants {
IMX8MQ,
IMX8MM,
IMX8MP,
+ IMX8Q,
IMX95,
IMX8MQ_EP,
IMX8MM_EP,
@@ -96,6 +98,7 @@ enum imx_pcie_variants {
#define IMX_PCIE_FLAG_HAS_PHY_RESET BIT(5)
#define IMX_PCIE_FLAG_HAS_SERDES BIT(6)
#define IMX_PCIE_FLAG_SUPPORT_64BIT BIT(7)
+#define IMX_PCIE_FLAG_CPU_ADDR_FIXUP BIT(8)
#define imx_check_flag(pci, val) (pci->drvdata->flags & val)
@@ -132,6 +135,7 @@ struct imx_pcie {
struct regmap *iomuxc_gpr;
u16 msi_ctrl;
u32 controller_id;
+ u32 local_addr;
struct reset_control *pciephy_reset;
struct reset_control *apps_reset;
struct reset_control *turnoff_reset;
@@ -402,6 +406,10 @@ static void imx_pcie_configure_type(struct imx_pcie *imx_pcie)
if (!drvdata->mode_mask[id])
id = 0;
+ /* If mode_mask is 0, means use phy driver to set mode */
+ if (!drvdata->mode_mask[id])
+ return;
+
mask = drvdata->mode_mask[id];
val = mode << (ffs(mask) - 1);
@@ -957,6 +965,7 @@ static void imx_pcie_ltssm_enable(struct device *dev)
struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
const struct imx_pcie_drvdata *drvdata = imx_pcie->drvdata;
+ phy_set_speed(imx_pcie->phy, PCI_EXP_LNKCAP_SLS_2_5GB);
if (drvdata->ltssm_mask)
regmap_update_bits(imx_pcie->iomuxc_gpr, drvdata->ltssm_off, drvdata->ltssm_mask,
drvdata->ltssm_mask);
@@ -969,6 +978,7 @@ static void imx_pcie_ltssm_disable(struct device *dev)
struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
const struct imx_pcie_drvdata *drvdata = imx_pcie->drvdata;
+ phy_set_speed(imx_pcie->phy, 0);
if (drvdata->ltssm_mask)
regmap_update_bits(imx_pcie->iomuxc_gpr, drvdata->ltssm_off,
drvdata->ltssm_mask, 0);
@@ -1104,6 +1114,12 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
goto err_clk_disable;
}
+ ret = phy_set_mode_ext(imx_pcie->phy, PHY_MODE_PCIE, PHY_MODE_PCIE_RC);
+ if (ret) {
+ dev_err(dev, "unable to set pcie PHY mode\n");
+ goto err_phy_off;
+ }
+
ret = phy_power_on(imx_pcie->phy);
if (ret) {
dev_err(dev, "waiting for PHY ready timeout!\n");
@@ -1154,6 +1170,28 @@ static void imx_pcie_host_exit(struct dw_pcie_rp *pp)
regulator_disable(imx_pcie->vpcie);
}
+static u64 imx_pcie_cpu_addr_fixup(struct dw_pcie *pcie, u64 cpu_addr)
+{
+ struct imx_pcie *imx_pcie = to_imx_pcie(pcie);
+ struct dw_pcie_ep *ep = &pcie->ep;
+ struct dw_pcie_rp *pp = &pcie->pp;
+ struct resource_entry *entry;
+ unsigned int offset;
+
+ if (!(imx_pcie->drvdata->flags & IMX_PCIE_FLAG_CPU_ADDR_FIXUP))
+ return cpu_addr;
+
+ if (imx_pcie->drvdata->mode == DW_PCIE_EP_TYPE) {
+ offset = ep->phys_base;
+ } else {
+ entry = resource_list_first_type(&pp->bridge->windows,
+ IORESOURCE_MEM);
+ offset = entry->res->start;
+ }
+
+ return (cpu_addr + imx_pcie->local_addr - offset);
+}
+
static const struct dw_pcie_host_ops imx_pcie_host_ops = {
.init = imx_pcie_host_init,
.deinit = imx_pcie_host_exit,
@@ -1162,6 +1200,7 @@ static const struct dw_pcie_host_ops imx_pcie_host_ops = {
static const struct dw_pcie_ops dw_pcie_ops = {
.start_link = imx_pcie_start_link,
.stop_link = imx_pcie_stop_link,
+ .cpu_addr_fixup = imx_pcie_cpu_addr_fixup,
};
static void imx_pcie_ep_init(struct dw_pcie_ep *ep)
@@ -1481,6 +1520,12 @@ static int imx_pcie_probe(struct platform_device *pdev)
"Failed to get PCIEPHY reset control\n");
}
+ if (imx_check_flag(imx_pcie, IMX_PCIE_FLAG_CPU_ADDR_FIXUP)) {
+ ret = of_property_read_u32(node, "fsl,local-address", &imx_pcie->local_addr);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to get local-address");
+ }
+
switch (imx_pcie->drvdata->variant) {
case IMX8MQ:
case IMX8MQ_EP:
@@ -1605,6 +1650,7 @@ static const char * const imx6q_clks[] = {"pcie_bus", "pcie", "pcie_phy"};
static const char * const imx8mm_clks[] = {"pcie_bus", "pcie", "pcie_aux"};
static const char * const imx8mq_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_aux"};
static const char * const imx6sx_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_inbound_axi"};
+static const char * const imx8q_clks[] = {"mstr", "slv", "dbi"};
static const struct imx_pcie_drvdata drvdata[] = {
[IMX6Q] = {
@@ -1708,6 +1754,13 @@ static const struct imx_pcie_drvdata drvdata[] = {
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
.set_ref_clk = imx8mm_pcie_set_ref_clk,
},
+ [IMX8Q] = {
+ .variant = IMX8Q,
+ .flags = IMX_PCIE_FLAG_HAS_PHYDRV |
+ IMX_PCIE_FLAG_CPU_ADDR_FIXUP,
+ .clk_names = imx8q_clks,
+ .clks_cnt = ARRAY_SIZE(imx8q_clks),
+ },
[IMX95] = {
.variant = IMX95,
.flags = IMX_PCIE_FLAG_HAS_SERDES,
@@ -1785,6 +1838,7 @@ static const struct of_device_id imx_pcie_of_match[] = {
{ .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], },
{ .compatible = "fsl,imx8mm-pcie", .data = &drvdata[IMX8MM], },
{ .compatible = "fsl,imx8mp-pcie", .data = &drvdata[IMX8MP], },
+ { .compatible = "fsl,imx8q-pcie", .data = &drvdata[IMX8Q], },
{ .compatible = "fsl,imx95-pcie", .data = &drvdata[IMX95], },
{ .compatible = "fsl,imx8mq-pcie-ep", .data = &drvdata[IMX8MQ_EP], },
{ .compatible = "fsl,imx8mm-pcie-ep", .data = &drvdata[IMX8MM_EP], },
--
2.34.1
^ permalink raw reply related
* [PATCH v3 10/11] dt-bindings: imx6q-pcie: Add i.MX8Q pcie compatible string
From: Frank Li @ 2024-04-02 14:33 UTC (permalink / raw)
To: Richard Zhu, Lucas Stach, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring, Bjorn Helgaas, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, Philipp Zabel, Liam Girdwood, Mark Brown,
Manivannan Sadhasivam, Krzysztof Kozlowski, Conor Dooley
Cc: linux-pci, imx, linux-arm-kernel, linux-kernel, bpf, devicetree,
Frank Li
In-Reply-To: <20240402-pci2_upstream-v3-0-803414bdb430@nxp.com>
From: Richard Zhu <hongxing.zhu@nxp.com>
Add i.MX8Q PCIe "fsl,imx8q-pcie" compatible strings.
Add "fsl,local-address" property for i.MX8Q platforms. fsl,local-address
is address of PCIe module in high speed io (HSIO)subsystem bus fabric. HSIO
bus fabric convert the incoming address base to this local-address. Two
instances of PCI have difference local address.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
.../devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml | 5 +++++
.../devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 18 ++++++++++++++++++
2 files changed, 23 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
index a8b34f58f8f49..9e767695d6480 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
@@ -92,6 +92,11 @@ properties:
enum: [1, 2, 3, 4]
default: 1
+ fsl,local-address:
+ description: Specify the local address mapped by the HSIO bus fabric
+ for i.MX8QM and i.MX8QXP PCIe module.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
phys:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index 8b8d77b1154b5..b73218933b80a 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -30,6 +30,7 @@ properties:
- fsl,imx8mm-pcie
- fsl,imx8mp-pcie
- fsl,imx95-pcie
+ - fsl,imx8q-pcie
clocks:
minItems: 3
@@ -184,6 +185,23 @@ allOf:
- const: pcie_bus
- const: pcie_aux
+ - if:
+ properties:
+ compatible:
+ enum:
+ - fsl,imx8q-pcie
+ then:
+ properties:
+ clocks:
+ maxItems: 3
+ clock-names:
+ items:
+ - const: dbi
+ - const: mstr
+ - const: slv
+ required:
+ - fsl,local-address
+
unevaluatedProperties: false
examples:
--
2.34.1
^ permalink raw reply related
* [PATCH v3 09/11] PCI: imx: Consolidate redundant if-checks
From: Frank Li @ 2024-04-02 14:33 UTC (permalink / raw)
To: Richard Zhu, Lucas Stach, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring, Bjorn Helgaas, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, Philipp Zabel, Liam Girdwood, Mark Brown,
Manivannan Sadhasivam, Krzysztof Kozlowski, Conor Dooley
Cc: linux-pci, imx, linux-arm-kernel, linux-kernel, bpf, devicetree,
Frank Li
In-Reply-To: <20240402-pci2_upstream-v3-0-803414bdb430@nxp.com>
Consolidated redundant if-checks pertaining to imx_pcie->phy. Instead of
two separate checks, merged them into one to improve code readability.
if (imx_pcie->phy) {
... code 1
}
if (imx_pcie->phy) {
... code 2
}
Merge into one if block.
if (imx_pcie->phy) {
... code 1
... code 2
}
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/pci/controller/dwc/pcie-imx.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-imx.c b/drivers/pci/controller/dwc/pcie-imx.c
index 653d8e8ee1abc..378808262d16b 100644
--- a/drivers/pci/controller/dwc/pcie-imx.c
+++ b/drivers/pci/controller/dwc/pcie-imx.c
@@ -1103,9 +1103,7 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
dev_err(dev, "pcie PHY power up failed\n");
goto err_clk_disable;
}
- }
- if (imx_pcie->phy) {
ret = phy_power_on(imx_pcie->phy);
if (ret) {
dev_err(dev, "waiting for PHY ready timeout!\n");
--
2.34.1
^ permalink raw reply related
* [PATCH v3 08/11] PCI: imx: Config look up table(LUT) to support MSI ITS and IOMMU for i.MX95
From: Frank Li @ 2024-04-02 14:33 UTC (permalink / raw)
To: Richard Zhu, Lucas Stach, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring, Bjorn Helgaas, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, Philipp Zabel, Liam Girdwood, Mark Brown,
Manivannan Sadhasivam, Krzysztof Kozlowski, Conor Dooley
Cc: linux-pci, imx, linux-arm-kernel, linux-kernel, bpf, devicetree,
Frank Li
In-Reply-To: <20240402-pci2_upstream-v3-0-803414bdb430@nxp.com>
i.MX95 need config LUT to convert bpf to stream id. IOMMU and ITS use the
same stream id. Check msi-map and smmu-map and make sure the same PCI bpf
map to the same stream id. Then config LUT related registers.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/pci/controller/dwc/pcie-imx.c | 175 ++++++++++++++++++++++++++++++++++
1 file changed, 175 insertions(+)
diff --git a/drivers/pci/controller/dwc/pcie-imx.c b/drivers/pci/controller/dwc/pcie-imx.c
index af0f960f28757..653d8e8ee1abc 100644
--- a/drivers/pci/controller/dwc/pcie-imx.c
+++ b/drivers/pci/controller/dwc/pcie-imx.c
@@ -55,6 +55,22 @@
#define IMX95_PE0_GEN_CTRL_3 0x1058
#define IMX95_PCIE_LTSSM_EN BIT(0)
+#define IMX95_PE0_LUT_ACSCTRL 0x1008
+#define IMX95_PEO_LUT_RWA BIT(16)
+#define IMX95_PE0_LUT_ENLOC GENMASK(4, 0)
+
+#define IMX95_PE0_LUT_DATA1 0x100c
+#define IMX95_PE0_LUT_VLD BIT(31)
+#define IMX95_PE0_LUT_DAC_ID GENMASK(10, 8)
+#define IMX95_PE0_LUT_STREAM_ID GENMASK(5, 0)
+
+#define IMX95_PE0_LUT_DATA2 0x1010
+#define IMX95_PE0_LUT_REQID GENMASK(31, 16)
+#define IMX95_PE0_LUT_MASK GENMASK(15, 0)
+
+#define IMX95_SID_MASK GENMASK(5, 0)
+#define IMX95_MAX_LUT 32
+
#define to_imx_pcie(x) dev_get_drvdata((x)->dev)
enum imx_pcie_variants {
@@ -217,6 +233,159 @@ static int imx95_pcie_init_phy(struct imx_pcie *imx_pcie)
return 0;
}
+static int imx_pcie_update_lut(struct imx_pcie *imx_pcie, int index, u16 reqid, u16 mask, u8 sid)
+{
+ struct dw_pcie *pci = imx_pcie->pci;
+ struct device *dev = pci->dev;
+ u32 data1, data2;
+
+ if (sid >= 64) {
+ dev_err(dev, "Too big stream id: %d\n", sid);
+ return -EINVAL;
+ }
+
+ data1 = FIELD_PREP(IMX95_PE0_LUT_DAC_ID, 0);
+ data1 |= FIELD_PREP(IMX95_PE0_LUT_STREAM_ID, sid);
+ data1 |= IMX95_PE0_LUT_VLD;
+
+ regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA1, data1);
+
+ data2 = mask;
+ data2 |= FIELD_PREP(IMX95_PE0_LUT_REQID, reqid);
+
+ regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA2, data2);
+
+ regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_ACSCTRL, index);
+
+ return 0;
+}
+
+struct imx_of_map {
+ u32 bdf;
+ u32 phandle;
+ u32 sid;
+ u32 sid_len;
+};
+
+static int imx_check_msi_and_smmmu(struct imx_pcie *imx_pcie,
+ struct imx_of_map *msi_map, u32 msi_size, u32 msi_map_mask,
+ struct imx_of_map *smmu_map, u32 smmu_size, u32 smmu_map_mask)
+{
+ struct dw_pcie *pci = imx_pcie->pci;
+ struct device *dev = pci->dev;
+ int i;
+
+ if (msi_map && smmu_map) {
+ if (msi_size != smmu_size)
+ return -EINVAL;
+ if (msi_map_mask != smmu_map_mask)
+ return -EINVAL;
+
+ for (i = 0; i < msi_size / sizeof(*msi_map); i++) {
+ if (msi_map->bdf != smmu_map->bdf) {
+ dev_err(dev, "bdf setting is not match\n");
+ return -EINVAL;
+ }
+ if ((msi_map->sid & IMX95_SID_MASK) != smmu_map->sid) {
+ dev_err(dev, "sid setting is not match\n");
+ return -EINVAL;
+ }
+ if ((msi_map->sid_len & IMX95_SID_MASK) != smmu_map->sid_len) {
+ dev_err(dev, "sid_len setting is not match\n");
+ return -EINVAL;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Simple static config lut according to dts settings DAC index and stream ID used as a match result
+ * of LUT pre-allocated and used by PCIes.
+ *
+ * Currently stream ID from 32-64 for PCIe.
+ * 32-40: first PCI bus.
+ * 40-48: second PCI bus.
+ *
+ * DAC_ID is index of TRDC.DAC index, start from 2 at iMX95.
+ * ITS [pci(2bit): streamid(6bits)]
+ * pci 0 is 0
+ * pci 1 is 3
+ */
+static int imx_pcie_config_sid(struct imx_pcie *imx_pcie)
+{
+ struct imx_of_map *msi_map = NULL, *smmu_map = NULL, *cur;
+ int i, j, lut_index, nr_map, msi_size = 0, smmu_size = 0;
+ u32 msi_map_mask = 0xffff, smmu_map_mask = 0xffff;
+ struct dw_pcie *pci = imx_pcie->pci;
+ struct device *dev = pci->dev;
+ u32 mask;
+ int size;
+
+ of_get_property(dev->of_node, "msi-map", &msi_size);
+ if (msi_size) {
+ msi_map = devm_kzalloc(dev, msi_size, GFP_KERNEL);
+ if (!msi_map)
+ return -ENOMEM;
+
+ if (of_property_read_u32_array(dev->of_node, "msi-map", (u32 *)msi_map,
+ msi_size / sizeof(u32)))
+ return -EINVAL;
+
+ of_property_read_u32(dev->of_node, "msi-map-mask", &msi_map_mask);
+ }
+
+ cur = msi_map;
+ size = msi_size;
+ mask = msi_map_mask;
+
+ of_get_property(dev->of_node, "iommu-map", &smmu_size);
+ if (smmu_size) {
+ smmu_map = devm_kzalloc(dev, smmu_size, GFP_KERNEL);
+ if (!smmu_map)
+ return -ENOMEM;
+
+ if (of_property_read_u32_array(dev->of_node, "iommu-map", (u32 *)smmu_map,
+ smmu_size / sizeof(u32)))
+ return -EINVAL;
+
+ of_property_read_u32(dev->of_node, "iommu_map_mask", &smmu_map_mask);
+ }
+
+ if (imx_check_msi_and_smmmu(imx_pcie, msi_map, msi_size, msi_map_mask,
+ smmu_map, smmu_size, smmu_map_mask))
+ return -EINVAL;
+
+ if (!cur) {
+ cur = smmu_map;
+ size = smmu_size;
+ mask = smmu_map_mask;
+ }
+
+ nr_map = size / (sizeof(*cur));
+
+ lut_index = 0;
+ for (i = 0; i < nr_map; i++) {
+ for (j = 0; j < cur->sid_len; j++) {
+ imx_pcie_update_lut(imx_pcie, lut_index, cur->bdf + j, mask,
+ (cur->sid + j) & IMX95_SID_MASK);
+ lut_index++;
+ }
+ cur++;
+
+ if (lut_index >= IMX95_MAX_LUT) {
+ dev_err(dev, "its-map/iommu-map exceed HW limiation\n");
+ return -EINVAL;
+ }
+ }
+
+ devm_kfree(dev, smmu_map);
+ devm_kfree(dev, msi_map);
+
+ return 0;
+}
+
static void imx_pcie_configure_type(struct imx_pcie *imx_pcie)
{
const struct imx_pcie_drvdata *drvdata = imx_pcie->drvdata;
@@ -950,6 +1119,12 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
goto err_phy_off;
}
+ ret = imx_pcie_config_sid(imx_pcie);
+ if (ret < 0) {
+ dev_err(dev, "failed to config sid:%d\n", ret);
+ goto err_phy_off;
+ }
+
imx_setup_phy_mpll(imx_pcie);
return 0;
--
2.34.1
^ permalink raw reply related
* [PATCH v3 07/11] PCI: imx: Simplify switch-case logic by involve core_reset callback
From: Frank Li @ 2024-04-02 14:33 UTC (permalink / raw)
To: Richard Zhu, Lucas Stach, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring, Bjorn Helgaas, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, Philipp Zabel, Liam Girdwood, Mark Brown,
Manivannan Sadhasivam, Krzysztof Kozlowski, Conor Dooley
Cc: linux-pci, imx, linux-arm-kernel, linux-kernel, bpf, devicetree,
Frank Li
In-Reply-To: <20240402-pci2_upstream-v3-0-803414bdb430@nxp.com>
Instead of using the switch case statement to assert/dassert the core reset
handled by this driver itself, let's introduce a new callback core_reset()
and define it for platforms that require it. This simplifies the code.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/pci/controller/dwc/pcie-imx.c | 131 ++++++++++++++++++----------------
1 file changed, 68 insertions(+), 63 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-imx.c b/drivers/pci/controller/dwc/pcie-imx.c
index 77dae5c3f7057..af0f960f28757 100644
--- a/drivers/pci/controller/dwc/pcie-imx.c
+++ b/drivers/pci/controller/dwc/pcie-imx.c
@@ -104,6 +104,7 @@ struct imx_pcie_drvdata {
const struct pci_epc_features *epc_features;
int (*init_phy)(struct imx_pcie *pcie);
int (*set_ref_clk)(struct imx_pcie *pcie, bool enable);
+ int (*core_reset)(struct imx_pcie *pcie, bool assert);
};
struct imx_pcie {
@@ -671,35 +672,72 @@ static void imx_pcie_clk_disable(struct imx_pcie *imx_pcie)
clk_bulk_disable_unprepare(imx_pcie->drvdata->clks_cnt, imx_pcie->clks);
}
+static int imx6sx_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
+{
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
+ assert ? IMX6SX_GPR12_PCIE_TEST_POWERDOWN : 0);
+ /* Force PCIe PHY reset */
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR5, IMX6SX_GPR5_PCIE_BTNRST_RESET,
+ assert ? IMX6SX_GPR5_PCIE_BTNRST_RESET : 0);
+ return 0;
+}
+
+static int imx6qp_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
+{
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_SW_RST,
+ assert ? IMX6Q_GPR1_PCIE_SW_RST : 0);
+ if (!assert)
+ usleep_range(200, 500);
+
+ return 0;
+}
+
+static int imx6q_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
+{
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_TEST_PD,
+ assert ? IMX6Q_GPR1_PCIE_TEST_PD : 0);
+
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_REF_CLK_EN,
+ assert ? 0 : IMX6Q_GPR1_PCIE_REF_CLK_EN);
+
+ return 0;
+}
+
+static int imx7d_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
+{
+ struct dw_pcie *pci = imx_pcie->pci;
+ struct device *dev = pci->dev;
+
+ if (assert)
+ return 0;
+
+ /*
+ * Workaround for ERR010728, failure of PCI-e PLL VCO to oscillate, especially when cold.
+ * This turns off "Duty-cycle Corrector" and other mysterious undocumented things.
+ */
+
+ if (likely(imx_pcie->phy_base)) {
+ /* De-assert DCC_FB_EN */
+ writel(PCIE_PHY_CMN_REG4_DCC_FB_EN, imx_pcie->phy_base + PCIE_PHY_CMN_REG4);
+ /* Assert RX_EQS and RX_EQS_SEL */
+ writel(PCIE_PHY_CMN_REG24_RX_EQ_SEL | PCIE_PHY_CMN_REG24_RX_EQ,
+ imx_pcie->phy_base + PCIE_PHY_CMN_REG24);
+ /* Assert ATT_MODE */
+ writel(PCIE_PHY_CMN_REG26_ATT_MODE, imx_pcie->phy_base + PCIE_PHY_CMN_REG26);
+ } else {
+ dev_warn(dev, "Unable to apply ERR010728 workaround. DT missing fsl,imx7d-pcie-phy phandle ?\n");
+ }
+ imx7d_pcie_wait_for_phy_pll_lock(imx_pcie);
+ return 0;
+}
+
static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie)
{
reset_control_assert(imx_pcie->pciephy_reset);
reset_control_assert(imx_pcie->apps_reset);
- switch (imx_pcie->drvdata->variant) {
- case IMX6SX:
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
- IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
- IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
- /* Force PCIe PHY reset */
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR5,
- IMX6SX_GPR5_PCIE_BTNRST_RESET,
- IMX6SX_GPR5_PCIE_BTNRST_RESET);
- break;
- case IMX6QP:
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
- IMX6Q_GPR1_PCIE_SW_RST,
- IMX6Q_GPR1_PCIE_SW_RST);
- break;
- case IMX6Q:
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
- IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
- IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
- break;
- default:
- break;
- }
+ if (imx_pcie->drvdata->core_reset)
+ imx_pcie->drvdata->core_reset(imx_pcie, true);
/* Some boards don't have PCIe reset GPIO. */
if (gpio_is_valid(imx_pcie->reset_gpio))
@@ -709,47 +747,10 @@ static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie)
static int imx_pcie_deassert_core_reset(struct imx_pcie *imx_pcie)
{
- struct dw_pcie *pci = imx_pcie->pci;
- struct device *dev = pci->dev;
-
reset_control_deassert(imx_pcie->pciephy_reset);
- switch (imx_pcie->drvdata->variant) {
- case IMX7D:
- /* Workaround for ERR010728, failure of PCI-e PLL VCO to
- * oscillate, especially when cold. This turns off "Duty-cycle
- * Corrector" and other mysterious undocumented things.
- */
- if (likely(imx_pcie->phy_base)) {
- /* De-assert DCC_FB_EN */
- writel(PCIE_PHY_CMN_REG4_DCC_FB_EN,
- imx_pcie->phy_base + PCIE_PHY_CMN_REG4);
- /* Assert RX_EQS and RX_EQS_SEL */
- writel(PCIE_PHY_CMN_REG24_RX_EQ_SEL
- | PCIE_PHY_CMN_REG24_RX_EQ,
- imx_pcie->phy_base + PCIE_PHY_CMN_REG24);
- /* Assert ATT_MODE */
- writel(PCIE_PHY_CMN_REG26_ATT_MODE,
- imx_pcie->phy_base + PCIE_PHY_CMN_REG26);
- } else {
- dev_warn(dev, "Unable to apply ERR010728 workaround. DT missing fsl,imx7d-pcie-phy phandle ?\n");
- }
-
- imx7d_pcie_wait_for_phy_pll_lock(imx_pcie);
- break;
- case IMX6SX:
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR5,
- IMX6SX_GPR5_PCIE_BTNRST_RESET, 0);
- break;
- case IMX6QP:
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
- IMX6Q_GPR1_PCIE_SW_RST, 0);
-
- usleep_range(200, 500);
- break;
- default:
- break;
- }
+ if (imx_pcie->drvdata->core_reset)
+ imx_pcie->drvdata->core_reset(imx_pcie, false);
/* Some boards don't have PCIe reset GPIO. */
if (gpio_is_valid(imx_pcie->reset_gpio)) {
@@ -1447,6 +1448,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
.init_phy = imx_pcie_init_phy,
.set_ref_clk = imx6q_pcie_set_ref_clk,
+ .core_reset = imx6q_pcie_core_reset,
},
[IMX6SX] = {
.variant = IMX6SX,
@@ -1462,6 +1464,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
.init_phy = imx6sx_pcie_init_phy,
.set_ref_clk = imx6sx_pcie_set_ref_clk,
+ .core_reset = imx6sx_pcie_core_reset,
},
[IMX6QP] = {
.variant = IMX6QP,
@@ -1478,6 +1481,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
.init_phy = imx_pcie_init_phy,
.set_ref_clk = imx6q_pcie_set_ref_clk,
+ .core_reset = imx6qp_pcie_core_reset,
},
[IMX7D] = {
.variant = IMX7D,
@@ -1491,6 +1495,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
.init_phy = imx7d_pcie_init_phy,
.set_ref_clk = imx7d_pcie_set_ref_clk,
+ .core_reset = imx7d_pcie_core_reset,
},
[IMX8MQ] = {
.variant = IMX8MQ,
--
2.34.1
^ permalink raw reply related
* Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi
From: Konrad Dybcio @ 2024-04-02 14:34 UTC (permalink / raw)
To: Krzysztof Kozlowski, Marc Gonzalez, Kalle Valo, Jeff Johnson,
ath10k
Cc: wireless, DT, MSM, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Pierre-Hugues Husson, Arnaud Vrac, Bjorn Andersson, Jami Kettunen,
Jeffrey Hugo
In-Reply-To: <252618e8-9e80-4774-a96c-caa7f838ef01@linaro.org>
On 30.03.2024 7:25 PM, Krzysztof Kozlowski wrote:
> On 28/03/2024 18:39, Marc Gonzalez wrote:
>> The ath10k driver waits for an "MSA_READY" indicator
>> to complete initialization. If the indicator is not
>> received, then the device remains unusable.
>>
>> cf. ath10k_qmi_driver_event_work()
>>
>> Several msm8998-based devices are affected by this issue.
>> Oddly, it seems safe to NOT wait for the indicator, and
>> proceed immediately when QMI_EVENT_SERVER_ARRIVE.
>>
>> Jeff Johnson wrote:
>>
>> The feedback I received was "it might be ok to change all ath10k qmi
>> to skip waiting for msa_ready", and it was pointed out that ath11k
>> (and ath12k) do not wait for it.
>>
>> However with so many deployed devices, "might be ok" isn't a strong
>> argument for changing the default behavior.
>>
>
> I think you got pretty clear comments:
>
> "This sounds more like a firmware feature, not a hardware feature."
>
> "This is why having this property in DT does not look right
> place for this."
Translating from dt maintainer speak to English, a functionally-equivalent
resolution of adding an of_machine_is_compatible("qcom,msm8998") is more
in line with the guidelines of not sprinkling firmware specifics in DTs
Konrad
^ permalink raw reply
* [PATCH v3 06/11] PCI: imx: Simplify switch-case logic by involve set_ref_clk callback
From: Frank Li @ 2024-04-02 14:33 UTC (permalink / raw)
To: Richard Zhu, Lucas Stach, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring, Bjorn Helgaas, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, Philipp Zabel, Liam Girdwood, Mark Brown,
Manivannan Sadhasivam, Krzysztof Kozlowski, Conor Dooley
Cc: linux-pci, imx, linux-arm-kernel, linux-kernel, bpf, devicetree,
Frank Li
In-Reply-To: <20240402-pci2_upstream-v3-0-803414bdb430@nxp.com>
Instead of using the switch case statement to enable/disable the reference
clock handled by this driver itself, let's introduce a new callback
set_ref_clk() and define it for platforms that require it. This simplifies
the code.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/pci/controller/dwc/pcie-imx.c | 119 ++++++++++++++++------------------
1 file changed, 55 insertions(+), 64 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-imx.c b/drivers/pci/controller/dwc/pcie-imx.c
index e93070d60df52..77dae5c3f7057 100644
--- a/drivers/pci/controller/dwc/pcie-imx.c
+++ b/drivers/pci/controller/dwc/pcie-imx.c
@@ -103,6 +103,7 @@ struct imx_pcie_drvdata {
const u32 mode_mask[IMX_PCIE_MAX_INSTANCES];
const struct pci_epc_features *epc_features;
int (*init_phy)(struct imx_pcie *pcie);
+ int (*set_ref_clk)(struct imx_pcie *pcie, bool enable);
};
struct imx_pcie {
@@ -585,77 +586,54 @@ static int imx_pcie_attach_pd(struct device *dev)
return 0;
}
-static int imx_pcie_enable_ref_clk(struct imx_pcie *imx_pcie)
+static int imx6sx_pcie_set_ref_clk(struct imx_pcie *imx_pcie, bool enable)
{
- unsigned int offset;
- int ret = 0;
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
+ enable ? 0 : IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
- switch (imx_pcie->drvdata->variant) {
- case IMX6SX:
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
- IMX6SX_GPR12_PCIE_TEST_POWERDOWN, 0);
- break;
- case IMX6QP:
- case IMX6Q:
+ return 0;
+}
+
+static int imx6q_pcie_set_ref_clk(struct imx_pcie *imx_pcie, bool enable)
+{
+ if (enable) {
/* power up core phy and enable ref clock */
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
- IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_TEST_PD, 0);
/*
- * the async reset input need ref clock to sync internally,
- * when the ref clock comes after reset, internal synced
- * reset time is too short, cannot meet the requirement.
- * add one ~10us delay here.
+ * the async reset input need ref clock to sync internally, when the ref clock comes
+ * after reset, internal synced reset time is too short, cannot meet the
+ * requirement.add one ~10us delay here.
*/
usleep_range(10, 100);
regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
- IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
- break;
- case IMX7D:
- case IMX95:
- case IMX95_EP:
- break;
- case IMX8MM:
- case IMX8MM_EP:
- case IMX8MQ:
- case IMX8MQ_EP:
- case IMX8MP:
- case IMX8MP_EP:
- offset = imx_pcie_grp_offset(imx_pcie);
- /*
- * Set the over ride low and enabled
- * make sure that REF_CLK is turned on.
- */
- regmap_update_bits(imx_pcie->iomuxc_gpr, offset,
- IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE,
- 0);
- regmap_update_bits(imx_pcie->iomuxc_gpr, offset,
- IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN,
- IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN);
- break;
+ IMX6Q_GPR1_PCIE_REF_CLK_EN, IMX6Q_GPR1_PCIE_REF_CLK_EN);
+ } else {
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ IMX6Q_GPR1_PCIE_REF_CLK_EN, 0);
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ IMX6Q_GPR1_PCIE_TEST_PD, IMX6Q_GPR1_PCIE_TEST_PD);
}
- return ret;
+ return 0;
}
-static void imx_pcie_disable_ref_clk(struct imx_pcie *imx_pcie)
+static int imx8mm_pcie_set_ref_clk(struct imx_pcie *imx_pcie, bool enable)
{
- switch (imx_pcie->drvdata->variant) {
- case IMX6QP:
- case IMX6Q:
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
- IMX6Q_GPR1_PCIE_REF_CLK_EN, 0);
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
- IMX6Q_GPR1_PCIE_TEST_PD,
- IMX6Q_GPR1_PCIE_TEST_PD);
- break;
- case IMX7D:
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
- IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
- IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
- break;
- default:
- break;
- }
+ int offset = imx_pcie_grp_offset(imx_pcie);
+
+ /* Set the over ride low and enabled make sure that REF_CLK is turned on.*/
+ regmap_update_bits(imx_pcie->iomuxc_gpr, offset, IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE,
+ enable ? 0 : IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE);
+ regmap_update_bits(imx_pcie->iomuxc_gpr, offset, IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN,
+ enable ? IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN : 0);
+ return 0;
+}
+
+static int imx7d_pcie_set_ref_clk(struct imx_pcie *imx_pcie, bool enable)
+{
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
+ enable ? 0 : IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
+ return 0;
}
static int imx_pcie_clk_enable(struct imx_pcie *imx_pcie)
@@ -668,10 +646,12 @@ static int imx_pcie_clk_enable(struct imx_pcie *imx_pcie)
if (ret)
return ret;
- ret = imx_pcie_enable_ref_clk(imx_pcie);
- if (ret) {
- dev_err(dev, "unable to enable pcie ref clock\n");
- goto err_ref_clk;
+ if (imx_pcie->drvdata->set_ref_clk) {
+ ret = imx_pcie->drvdata->set_ref_clk(imx_pcie, true);
+ if (ret) {
+ dev_err(dev, "unable to enable pcie ref clock\n");
+ goto err_ref_clk;
+ }
}
/* allow the clocks to stabilize */
@@ -686,7 +666,8 @@ static int imx_pcie_clk_enable(struct imx_pcie *imx_pcie)
static void imx_pcie_clk_disable(struct imx_pcie *imx_pcie)
{
- imx_pcie_disable_ref_clk(imx_pcie);
+ if (imx_pcie->drvdata->set_ref_clk)
+ imx_pcie->drvdata->set_ref_clk(imx_pcie, false);
clk_bulk_disable_unprepare(imx_pcie->drvdata->clks_cnt, imx_pcie->clks);
}
@@ -1465,6 +1446,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
.mode_off[0] = IOMUXC_GPR12,
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
.init_phy = imx_pcie_init_phy,
+ .set_ref_clk = imx6q_pcie_set_ref_clk,
},
[IMX6SX] = {
.variant = IMX6SX,
@@ -1479,6 +1461,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
.mode_off[0] = IOMUXC_GPR12,
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
.init_phy = imx6sx_pcie_init_phy,
+ .set_ref_clk = imx6sx_pcie_set_ref_clk,
},
[IMX6QP] = {
.variant = IMX6QP,
@@ -1494,6 +1477,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
.mode_off[0] = IOMUXC_GPR12,
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
.init_phy = imx_pcie_init_phy,
+ .set_ref_clk = imx6q_pcie_set_ref_clk,
},
[IMX7D] = {
.variant = IMX7D,
@@ -1506,6 +1490,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
.mode_off[0] = IOMUXC_GPR12,
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
.init_phy = imx7d_pcie_init_phy,
+ .set_ref_clk = imx7d_pcie_set_ref_clk,
},
[IMX8MQ] = {
.variant = IMX8MQ,
@@ -1519,6 +1504,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
.mode_off[1] = IOMUXC_GPR12,
.mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
.init_phy = imx8mq_pcie_init_phy,
+ .set_ref_clk = imx8mm_pcie_set_ref_clk,
},
[IMX8MM] = {
.variant = IMX8MM,
@@ -1530,6 +1516,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
.clks_cnt = ARRAY_SIZE(imx8mm_clks),
.mode_off[0] = IOMUXC_GPR12,
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
+ .set_ref_clk = imx8mm_pcie_set_ref_clk,
},
[IMX8MP] = {
.variant = IMX8MP,
@@ -1541,6 +1528,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
.clks_cnt = ARRAY_SIZE(imx8mm_clks),
.mode_off[0] = IOMUXC_GPR12,
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
+ .set_ref_clk = imx8mm_pcie_set_ref_clk,
},
[IMX95] = {
.variant = IMX95,
@@ -1567,6 +1555,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
.mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
.epc_features = &imx8m_pcie_epc_features,
.init_phy = imx8mq_pcie_init_phy,
+ .set_ref_clk = imx8mm_pcie_set_ref_clk,
},
[IMX8MM_EP] = {
.variant = IMX8MM_EP,
@@ -1579,6 +1568,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
.mode_off[0] = IOMUXC_GPR12,
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
.epc_features = &imx8m_pcie_epc_features,
+ .set_ref_clk = imx8mm_pcie_set_ref_clk,
},
[IMX8MP_EP] = {
.variant = IMX8MP_EP,
@@ -1591,6 +1581,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
.mode_off[0] = IOMUXC_GPR12,
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
.epc_features = &imx8m_pcie_epc_features,
+ .set_ref_clk = imx8mm_pcie_set_ref_clk,
},
[IMX95_EP] = {
.variant = IMX95_EP,
--
2.34.1
^ permalink raw reply related
* [PATCH v3 05/11] MAINTAINERS: pci: imx: update imx6* to imx* since rename driver file
From: Frank Li @ 2024-04-02 14:33 UTC (permalink / raw)
To: Richard Zhu, Lucas Stach, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring, Bjorn Helgaas, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, Philipp Zabel, Liam Girdwood, Mark Brown,
Manivannan Sadhasivam, Krzysztof Kozlowski, Conor Dooley
Cc: linux-pci, imx, linux-arm-kernel, linux-kernel, bpf, devicetree,
Frank Li
In-Reply-To: <20240402-pci2_upstream-v3-0-803414bdb430@nxp.com>
Add me to imx pcie driver maintainer.
Add mail list imx@lists.linux.dev.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
MAINTAINERS | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 8d1052fa6a692..59a409dd604d8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16736,14 +16736,16 @@ F: drivers/pci/controller/pci-host-generic.c
PCI DRIVER FOR IMX6
M: Richard Zhu <hongxing.zhu@nxp.com>
+M: Frank Li <Frank.Li@nxp.com>
M: Lucas Stach <l.stach@pengutronix.de>
L: linux-pci@vger.kernel.org
+L: imx@lists.linux.dev
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
F: Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
F: Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
-F: drivers/pci/controller/dwc/*imx6*
+F: drivers/pci/controller/dwc/*imx*
PCI DRIVER FOR INTEL IXP4XX
M: Linus Walleij <linus.walleij@linaro.org>
--
2.34.1
^ permalink raw reply related
* [PATCH v3 04/11] PCI: imx6: Rename pci-imx6.c to pcie-imx.c
From: Frank Li @ 2024-04-02 14:33 UTC (permalink / raw)
To: Richard Zhu, Lucas Stach, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring, Bjorn Helgaas, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, Philipp Zabel, Liam Girdwood, Mark Brown,
Manivannan Sadhasivam, Krzysztof Kozlowski, Conor Dooley
Cc: linux-pci, imx, linux-arm-kernel, linux-kernel, bpf, devicetree,
Frank Li
In-Reply-To: <20240402-pci2_upstream-v3-0-803414bdb430@nxp.com>
Update the filename from 'pci-imx6.c' to 'pcie-imx.c' to accurately reflect
its applicability to all i.MX chips (i.MX6x, i.MX7x, i.MX8x, i.MX9x).
Eliminate the '6' to prevent confusion. Additionally, correct the prefix
from 'pci-' to 'pcie-'.
Retain the previous configuration CONFIG_PCI_IMX6 unchanged to maintain
compatibility.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/pci/controller/dwc/Makefile | 2 +-
drivers/pci/controller/dwc/{pci-imx6.c => pcie-imx.c} | 0
2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index bac103faa5237..eaea7abbabc2c 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -7,7 +7,7 @@ obj-$(CONFIG_PCIE_BT1) += pcie-bt1.o
obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
obj-$(CONFIG_PCIE_FU740) += pcie-fu740.o
-obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
+obj-$(CONFIG_PCI_IMX6) += pcie-imx.o
obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pcie-imx.c
similarity index 100%
rename from drivers/pci/controller/dwc/pci-imx6.c
rename to drivers/pci/controller/dwc/pcie-imx.c
--
2.34.1
^ permalink raw reply related
* [PATCH v3 03/11] PCI: imx6: Rename imx6_* with imx_*
From: Frank Li @ 2024-04-02 14:33 UTC (permalink / raw)
To: Richard Zhu, Lucas Stach, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring, Bjorn Helgaas, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, Philipp Zabel, Liam Girdwood, Mark Brown,
Manivannan Sadhasivam, Krzysztof Kozlowski, Conor Dooley
Cc: linux-pci, imx, linux-arm-kernel, linux-kernel, bpf, devicetree,
Frank Li
In-Reply-To: <20240402-pci2_upstream-v3-0-803414bdb430@nxp.com>
imx6_* actually mean for all imx chips (imx6x, imx7x, imx8x and imx9x).
Rename imx6_* with imx_* to avoid confuse.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 760 +++++++++++++++++-----------------
1 file changed, 380 insertions(+), 380 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 6c4d25b92225e..e93070d60df52 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -55,9 +55,9 @@
#define IMX95_PE0_GEN_CTRL_3 0x1058
#define IMX95_PCIE_LTSSM_EN BIT(0)
-#define to_imx6_pcie(x) dev_get_drvdata((x)->dev)
+#define to_imx_pcie(x) dev_get_drvdata((x)->dev)
-enum imx6_pcie_variants {
+enum imx_pcie_variants {
IMX6Q,
IMX6SX,
IMX6QP,
@@ -72,25 +72,25 @@ enum imx6_pcie_variants {
IMX95_EP,
};
-#define IMX6_PCIE_FLAG_IMX6_PHY BIT(0)
-#define IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE BIT(1)
-#define IMX6_PCIE_FLAG_SUPPORTS_SUSPEND BIT(2)
-#define IMX6_PCIE_FLAG_HAS_PHYDRV BIT(3)
-#define IMX6_PCIE_FLAG_HAS_APP_RESET BIT(4)
-#define IMX6_PCIE_FLAG_HAS_PHY_RESET BIT(5)
-#define IMX6_PCIE_FLAG_HAS_SERDES BIT(6)
-#define IMX6_PCIE_FLAG_SUPPORT_64BIT BIT(7)
+#define IMX_PCIE_FLAG_IMX_PHY BIT(0)
+#define IMX_PCIE_FLAG_IMX_SPEED_CHANGE BIT(1)
+#define IMX_PCIE_FLAG_SUPPORTS_SUSPEND BIT(2)
+#define IMX_PCIE_FLAG_HAS_PHYDRV BIT(3)
+#define IMX_PCIE_FLAG_HAS_APP_RESET BIT(4)
+#define IMX_PCIE_FLAG_HAS_PHY_RESET BIT(5)
+#define IMX_PCIE_FLAG_HAS_SERDES BIT(6)
+#define IMX_PCIE_FLAG_SUPPORT_64BIT BIT(7)
-#define imx6_check_flag(pci, val) (pci->drvdata->flags & val)
+#define imx_check_flag(pci, val) (pci->drvdata->flags & val)
-#define IMX6_PCIE_MAX_CLKS 6
+#define IMX_PCIE_MAX_CLKS 6
-#define IMX6_PCIE_MAX_INSTANCES 2
+#define IMX_PCIE_MAX_INSTANCES 2
-struct imx6_pcie;
+struct imx_pcie;
-struct imx6_pcie_drvdata {
- enum imx6_pcie_variants variant;
+struct imx_pcie_drvdata {
+ enum imx_pcie_variants variant;
enum dw_pcie_device_mode mode;
u32 flags;
int dbi_length;
@@ -99,18 +99,18 @@ struct imx6_pcie_drvdata {
const u32 clks_cnt;
const u32 ltssm_off;
const u32 ltssm_mask;
- const u32 mode_off[IMX6_PCIE_MAX_INSTANCES];
- const u32 mode_mask[IMX6_PCIE_MAX_INSTANCES];
+ const u32 mode_off[IMX_PCIE_MAX_INSTANCES];
+ const u32 mode_mask[IMX_PCIE_MAX_INSTANCES];
const struct pci_epc_features *epc_features;
- int (*init_phy)(struct imx6_pcie *pcie);
+ int (*init_phy)(struct imx_pcie *pcie);
};
-struct imx6_pcie {
+struct imx_pcie {
struct dw_pcie *pci;
int reset_gpio;
bool gpio_active_high;
bool link_is_up;
- struct clk_bulk_data clks[IMX6_PCIE_MAX_CLKS];
+ struct clk_bulk_data clks[IMX_PCIE_MAX_CLKS];
struct regmap *iomuxc_gpr;
u16 msi_ctrl;
u32 controller_id;
@@ -131,7 +131,7 @@ struct imx6_pcie {
/* power domain for pcie phy */
struct device *pd_pcie_phy;
struct phy *phy;
- const struct imx6_pcie_drvdata *drvdata;
+ const struct imx_pcie_drvdata *drvdata;
};
/* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */
@@ -186,28 +186,28 @@ struct imx6_pcie {
#define PHY_RX_OVRD_IN_LO_RX_DATA_EN BIT(5)
#define PHY_RX_OVRD_IN_LO_RX_PLL_EN BIT(3)
-static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
+static unsigned int imx_pcie_grp_offset(const struct imx_pcie *imx_pcie)
{
- WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ &&
- imx6_pcie->drvdata->variant != IMX8MQ_EP &&
- imx6_pcie->drvdata->variant != IMX8MM &&
- imx6_pcie->drvdata->variant != IMX8MM_EP &&
- imx6_pcie->drvdata->variant != IMX8MP &&
- imx6_pcie->drvdata->variant != IMX8MP_EP);
- return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
+ WARN_ON(imx_pcie->drvdata->variant != IMX8MQ &&
+ imx_pcie->drvdata->variant != IMX8MQ_EP &&
+ imx_pcie->drvdata->variant != IMX8MM &&
+ imx_pcie->drvdata->variant != IMX8MM_EP &&
+ imx_pcie->drvdata->variant != IMX8MP &&
+ imx_pcie->drvdata->variant != IMX8MP_EP);
+ return imx_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
}
-static int imx95_pcie_init_phy(struct imx6_pcie *imx6_pcie)
+static int imx95_pcie_init_phy(struct imx_pcie *imx_pcie)
{
- regmap_update_bits(imx6_pcie->iomuxc_gpr,
+ regmap_update_bits(imx_pcie->iomuxc_gpr,
IMX95_PCIE_SS_RW_REG_0,
IMX95_PCIE_PHY_CR_PARA_SEL,
IMX95_PCIE_PHY_CR_PARA_SEL);
- regmap_update_bits(imx6_pcie->iomuxc_gpr,
+ regmap_update_bits(imx_pcie->iomuxc_gpr,
IMX95_PCIE_PHY_GEN_CTRL,
IMX95_PCIE_REF_USE_PAD, 0);
- regmap_update_bits(imx6_pcie->iomuxc_gpr,
+ regmap_update_bits(imx_pcie->iomuxc_gpr,
IMX95_PCIE_SS_RW_REG_0,
IMX95_PCIE_REF_CLKEN,
IMX95_PCIE_REF_CLKEN);
@@ -215,9 +215,9 @@ static int imx95_pcie_init_phy(struct imx6_pcie *imx6_pcie)
return 0;
}
-static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
+static void imx_pcie_configure_type(struct imx_pcie *imx_pcie)
{
- const struct imx6_pcie_drvdata *drvdata = imx6_pcie->drvdata;
+ const struct imx_pcie_drvdata *drvdata = imx_pcie->drvdata;
unsigned int mask, val, mode, id;
if (drvdata->mode == DW_PCIE_EP_TYPE)
@@ -225,7 +225,7 @@ static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
else
mode = PCI_EXP_TYPE_ROOT_PORT;
- id = imx6_pcie->controller_id;
+ id = imx_pcie->controller_id;
/* If mode_mask[id] is zero, means each controller have its individual gpr */
if (!drvdata->mode_mask[id])
@@ -234,12 +234,12 @@ static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
mask = drvdata->mode_mask[id];
val = mode << (ffs(mask) - 1);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, drvdata->mode_off[id], mask, val);
+ regmap_update_bits(imx_pcie->iomuxc_gpr, drvdata->mode_off[id], mask, val);
}
-static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val)
+static int pcie_phy_poll_ack(struct imx_pcie *imx_pcie, bool exp_val)
{
- struct dw_pcie *pci = imx6_pcie->pci;
+ struct dw_pcie *pci = imx_pcie->pci;
bool val;
u32 max_iterations = 10;
u32 wait_counter = 0;
@@ -258,9 +258,9 @@ static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val)
return -ETIMEDOUT;
}
-static int pcie_phy_wait_ack(struct imx6_pcie *imx6_pcie, int addr)
+static int pcie_phy_wait_ack(struct imx_pcie *imx_pcie, int addr)
{
- struct dw_pcie *pci = imx6_pcie->pci;
+ struct dw_pcie *pci = imx_pcie->pci;
u32 val;
int ret;
@@ -270,24 +270,24 @@ static int pcie_phy_wait_ack(struct imx6_pcie *imx6_pcie, int addr)
val |= PCIE_PHY_CTRL_CAP_ADR;
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val);
- ret = pcie_phy_poll_ack(imx6_pcie, true);
+ ret = pcie_phy_poll_ack(imx_pcie, true);
if (ret)
return ret;
val = PCIE_PHY_CTRL_DATA(addr);
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val);
- return pcie_phy_poll_ack(imx6_pcie, false);
+ return pcie_phy_poll_ack(imx_pcie, false);
}
/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */
-static int pcie_phy_read(struct imx6_pcie *imx6_pcie, int addr, u16 *data)
+static int pcie_phy_read(struct imx_pcie *imx_pcie, int addr, u16 *data)
{
- struct dw_pcie *pci = imx6_pcie->pci;
+ struct dw_pcie *pci = imx_pcie->pci;
u32 phy_ctl;
int ret;
- ret = pcie_phy_wait_ack(imx6_pcie, addr);
+ ret = pcie_phy_wait_ack(imx_pcie, addr);
if (ret)
return ret;
@@ -295,7 +295,7 @@ static int pcie_phy_read(struct imx6_pcie *imx6_pcie, int addr, u16 *data)
phy_ctl = PCIE_PHY_CTRL_RD;
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, phy_ctl);
- ret = pcie_phy_poll_ack(imx6_pcie, true);
+ ret = pcie_phy_poll_ack(imx_pcie, true);
if (ret)
return ret;
@@ -304,18 +304,18 @@ static int pcie_phy_read(struct imx6_pcie *imx6_pcie, int addr, u16 *data)
/* deassert Read signal */
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, 0x00);
- return pcie_phy_poll_ack(imx6_pcie, false);
+ return pcie_phy_poll_ack(imx_pcie, false);
}
-static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data)
+static int pcie_phy_write(struct imx_pcie *imx_pcie, int addr, u16 data)
{
- struct dw_pcie *pci = imx6_pcie->pci;
+ struct dw_pcie *pci = imx_pcie->pci;
u32 var;
int ret;
/* write addr */
/* cap addr */
- ret = pcie_phy_wait_ack(imx6_pcie, addr);
+ ret = pcie_phy_wait_ack(imx_pcie, addr);
if (ret)
return ret;
@@ -326,7 +326,7 @@ static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data)
var |= PCIE_PHY_CTRL_CAP_DAT;
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
- ret = pcie_phy_poll_ack(imx6_pcie, true);
+ ret = pcie_phy_poll_ack(imx_pcie, true);
if (ret)
return ret;
@@ -335,7 +335,7 @@ static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data)
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
/* wait for ack de-assertion */
- ret = pcie_phy_poll_ack(imx6_pcie, false);
+ ret = pcie_phy_poll_ack(imx_pcie, false);
if (ret)
return ret;
@@ -344,7 +344,7 @@ static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data)
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
/* wait for ack */
- ret = pcie_phy_poll_ack(imx6_pcie, true);
+ ret = pcie_phy_poll_ack(imx_pcie, true);
if (ret)
return ret;
@@ -353,7 +353,7 @@ static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data)
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
/* wait for ack de-assertion */
- ret = pcie_phy_poll_ack(imx6_pcie, false);
+ ret = pcie_phy_poll_ack(imx_pcie, false);
if (ret)
return ret;
@@ -362,74 +362,74 @@ static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data)
return 0;
}
-static int imx8mq_pcie_init_phy(struct imx6_pcie *imx6_pcie)
+static int imx8mq_pcie_init_phy(struct imx_pcie *imx_pcie)
{
/* TODO: Currently this code assumes external oscillator is being used */
- regmap_update_bits(imx6_pcie->iomuxc_gpr,
- imx6_pcie_grp_offset(imx6_pcie),
+ regmap_update_bits(imx_pcie->iomuxc_gpr,
+ imx_pcie_grp_offset(imx_pcie),
IMX8MQ_GPR_PCIE_REF_USE_PAD,
IMX8MQ_GPR_PCIE_REF_USE_PAD);
/*
* Regarding the datasheet, the PCIE_VPH is suggested to be 1.8V. If the PCIE_VPH is
* supplied by 3.3V, the VREG_BYPASS should be cleared to zero.
*/
- if (imx6_pcie->vph && regulator_get_voltage(imx6_pcie->vph) > 3000000)
- regmap_update_bits(imx6_pcie->iomuxc_gpr,
- imx6_pcie_grp_offset(imx6_pcie),
+ if (imx_pcie->vph && regulator_get_voltage(imx_pcie->vph) > 3000000)
+ regmap_update_bits(imx_pcie->iomuxc_gpr,
+ imx_pcie_grp_offset(imx_pcie),
IMX8MQ_GPR_PCIE_VREG_BYPASS,
0);
return 0;
}
-static int imx7d_pcie_init_phy(struct imx6_pcie *imx6_pcie)
+static int imx7d_pcie_init_phy(struct imx_pcie *imx_pcie)
{
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
return 0;
}
-static int imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
+static int imx_pcie_init_phy(struct imx_pcie *imx_pcie)
{
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
/* configure constant input signal to the pcie ctrl and phy */
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_DEEMPH_GEN1,
- imx6_pcie->tx_deemph_gen1 << 0);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ imx_pcie->tx_deemph_gen1 << 0);
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
- imx6_pcie->tx_deemph_gen2_3p5db << 6);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ imx_pcie->tx_deemph_gen2_3p5db << 6);
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
- imx6_pcie->tx_deemph_gen2_6db << 12);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ imx_pcie->tx_deemph_gen2_6db << 12);
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_SWING_FULL,
- imx6_pcie->tx_swing_full << 18);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ imx_pcie->tx_swing_full << 18);
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_SWING_LOW,
- imx6_pcie->tx_swing_low << 25);
+ imx_pcie->tx_swing_low << 25);
return 0;
}
-static int imx6sx_pcie_init_phy(struct imx6_pcie *imx6_pcie)
+static int imx6sx_pcie_init_phy(struct imx_pcie *imx_pcie)
{
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_RX_EQ_MASK, IMX6SX_GPR12_PCIE_RX_EQ_2);
- return imx6_pcie_init_phy(imx6_pcie);
+ return imx_pcie_init_phy(imx_pcie);
}
-static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
+static void imx7d_pcie_wait_for_phy_pll_lock(struct imx_pcie *imx_pcie)
{
u32 val;
- struct device *dev = imx6_pcie->pci->dev;
+ struct device *dev = imx_pcie->pci->dev;
- if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr,
+ if (regmap_read_poll_timeout(imx_pcie->iomuxc_gpr,
IOMUXC_GPR22, val,
val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED,
PHY_PLL_LOCK_WAIT_USLEEP_MAX,
@@ -437,19 +437,19 @@ static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
dev_err(dev, "PCIe PLL lock timeout\n");
}
-static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie)
+static int imx_setup_phy_mpll(struct imx_pcie *imx_pcie)
{
unsigned long phy_rate = 0;
int mult, div;
u16 val;
int i;
- if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_IMX6_PHY))
+ if (!(imx_pcie->drvdata->flags & IMX_PCIE_FLAG_IMX_PHY))
return 0;
- for (i = 0; i < imx6_pcie->drvdata->clks_cnt; i++)
- if (strncmp(imx6_pcie->clks[i].id, "pcie_phy", 8) == 0)
- phy_rate = clk_get_rate(imx6_pcie->clks[i].clk);
+ for (i = 0; i < imx_pcie->drvdata->clks_cnt; i++)
+ if (strncmp(imx_pcie->clks[i].id, "pcie_phy", 8) == 0)
+ phy_rate = clk_get_rate(imx_pcie->clks[i].clk);
switch (phy_rate) {
case 125000000:
@@ -467,46 +467,46 @@ static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie)
div = 1;
break;
default:
- dev_err(imx6_pcie->pci->dev,
+ dev_err(imx_pcie->pci->dev,
"Unsupported PHY reference clock rate %lu\n", phy_rate);
return -EINVAL;
}
- pcie_phy_read(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, &val);
+ pcie_phy_read(imx_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, &val);
val &= ~(PCIE_PHY_MPLL_MULTIPLIER_MASK <<
PCIE_PHY_MPLL_MULTIPLIER_SHIFT);
val |= mult << PCIE_PHY_MPLL_MULTIPLIER_SHIFT;
val |= PCIE_PHY_MPLL_MULTIPLIER_OVRD;
- pcie_phy_write(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, val);
+ pcie_phy_write(imx_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, val);
- pcie_phy_read(imx6_pcie, PCIE_PHY_ATEOVRD, &val);
+ pcie_phy_read(imx_pcie, PCIE_PHY_ATEOVRD, &val);
val &= ~(PCIE_PHY_ATEOVRD_REF_CLKDIV_MASK <<
PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT);
val |= div << PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT;
val |= PCIE_PHY_ATEOVRD_EN;
- pcie_phy_write(imx6_pcie, PCIE_PHY_ATEOVRD, val);
+ pcie_phy_write(imx_pcie, PCIE_PHY_ATEOVRD, val);
return 0;
}
-static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie)
+static void imx_pcie_reset_phy(struct imx_pcie *imx_pcie)
{
u16 tmp;
- if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_IMX6_PHY))
+ if (!(imx_pcie->drvdata->flags & IMX_PCIE_FLAG_IMX_PHY))
return;
- pcie_phy_read(imx6_pcie, PHY_RX_OVRD_IN_LO, &tmp);
+ pcie_phy_read(imx_pcie, PHY_RX_OVRD_IN_LO, &tmp);
tmp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
PHY_RX_OVRD_IN_LO_RX_PLL_EN);
- pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp);
+ pcie_phy_write(imx_pcie, PHY_RX_OVRD_IN_LO, tmp);
usleep_range(2000, 3000);
- pcie_phy_read(imx6_pcie, PHY_RX_OVRD_IN_LO, &tmp);
+ pcie_phy_read(imx_pcie, PHY_RX_OVRD_IN_LO, &tmp);
tmp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN |
PHY_RX_OVRD_IN_LO_RX_PLL_EN);
- pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp);
+ pcie_phy_write(imx_pcie, PHY_RX_OVRD_IN_LO, tmp);
}
#ifdef CONFIG_ARM
@@ -545,22 +545,22 @@ static int imx6q_pcie_abort_handler(unsigned long addr,
}
#endif
-static int imx6_pcie_attach_pd(struct device *dev)
+static int imx_pcie_attach_pd(struct device *dev)
{
- struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+ struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
struct device_link *link;
/* Do nothing when in a single power domain */
if (dev->pm_domain)
return 0;
- imx6_pcie->pd_pcie = dev_pm_domain_attach_by_name(dev, "pcie");
- if (IS_ERR(imx6_pcie->pd_pcie))
- return PTR_ERR(imx6_pcie->pd_pcie);
+ imx_pcie->pd_pcie = dev_pm_domain_attach_by_name(dev, "pcie");
+ if (IS_ERR(imx_pcie->pd_pcie))
+ return PTR_ERR(imx_pcie->pd_pcie);
/* Do nothing when power domain missing */
- if (!imx6_pcie->pd_pcie)
+ if (!imx_pcie->pd_pcie)
return 0;
- link = device_link_add(dev, imx6_pcie->pd_pcie,
+ link = device_link_add(dev, imx_pcie->pd_pcie,
DL_FLAG_STATELESS |
DL_FLAG_PM_RUNTIME |
DL_FLAG_RPM_ACTIVE);
@@ -569,11 +569,11 @@ static int imx6_pcie_attach_pd(struct device *dev)
return -EINVAL;
}
- imx6_pcie->pd_pcie_phy = dev_pm_domain_attach_by_name(dev, "pcie_phy");
- if (IS_ERR(imx6_pcie->pd_pcie_phy))
- return PTR_ERR(imx6_pcie->pd_pcie_phy);
+ imx_pcie->pd_pcie_phy = dev_pm_domain_attach_by_name(dev, "pcie_phy");
+ if (IS_ERR(imx_pcie->pd_pcie_phy))
+ return PTR_ERR(imx_pcie->pd_pcie_phy);
- link = device_link_add(dev, imx6_pcie->pd_pcie_phy,
+ link = device_link_add(dev, imx_pcie->pd_pcie_phy,
DL_FLAG_STATELESS |
DL_FLAG_PM_RUNTIME |
DL_FLAG_RPM_ACTIVE);
@@ -585,20 +585,20 @@ static int imx6_pcie_attach_pd(struct device *dev)
return 0;
}
-static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
+static int imx_pcie_enable_ref_clk(struct imx_pcie *imx_pcie)
{
unsigned int offset;
int ret = 0;
- switch (imx6_pcie->drvdata->variant) {
+ switch (imx_pcie->drvdata->variant) {
case IMX6SX:
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_TEST_POWERDOWN, 0);
break;
case IMX6QP:
case IMX6Q:
/* power up core phy and enable ref clock */
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
/*
* the async reset input need ref clock to sync internally,
@@ -607,7 +607,7 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
* add one ~10us delay here.
*/
usleep_range(10, 100);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
break;
case IMX7D:
@@ -620,15 +620,15 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
case IMX8MQ_EP:
case IMX8MP:
case IMX8MP_EP:
- offset = imx6_pcie_grp_offset(imx6_pcie);
+ offset = imx_pcie_grp_offset(imx_pcie);
/*
* Set the over ride low and enabled
* make sure that REF_CLK is turned on.
*/
- regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, offset,
IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE,
0);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, offset,
IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN,
IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN);
break;
@@ -637,19 +637,19 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
return ret;
}
-static void imx6_pcie_disable_ref_clk(struct imx6_pcie *imx6_pcie)
+static void imx_pcie_disable_ref_clk(struct imx_pcie *imx_pcie)
{
- switch (imx6_pcie->drvdata->variant) {
+ switch (imx_pcie->drvdata->variant) {
case IMX6QP:
case IMX6Q:
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_REF_CLK_EN, 0);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_TEST_PD,
IMX6Q_GPR1_PCIE_TEST_PD);
break;
case IMX7D:
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
break;
@@ -658,17 +658,17 @@ static void imx6_pcie_disable_ref_clk(struct imx6_pcie *imx6_pcie)
}
}
-static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie)
+static int imx_pcie_clk_enable(struct imx_pcie *imx_pcie)
{
- struct dw_pcie *pci = imx6_pcie->pci;
+ struct dw_pcie *pci = imx_pcie->pci;
struct device *dev = pci->dev;
int ret;
- ret = clk_bulk_prepare_enable(imx6_pcie->drvdata->clks_cnt, imx6_pcie->clks);
+ ret = clk_bulk_prepare_enable(imx_pcie->drvdata->clks_cnt, imx_pcie->clks);
if (ret)
return ret;
- ret = imx6_pcie_enable_ref_clk(imx6_pcie);
+ ret = imx_pcie_enable_ref_clk(imx_pcie);
if (ret) {
dev_err(dev, "unable to enable pcie ref clock\n");
goto err_ref_clk;
@@ -679,41 +679,41 @@ static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie)
return 0;
err_ref_clk:
- clk_bulk_disable_unprepare(imx6_pcie->drvdata->clks_cnt, imx6_pcie->clks);
+ clk_bulk_disable_unprepare(imx_pcie->drvdata->clks_cnt, imx_pcie->clks);
return ret;
}
-static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
+static void imx_pcie_clk_disable(struct imx_pcie *imx_pcie)
{
- imx6_pcie_disable_ref_clk(imx6_pcie);
- clk_bulk_disable_unprepare(imx6_pcie->drvdata->clks_cnt, imx6_pcie->clks);
+ imx_pcie_disable_ref_clk(imx_pcie);
+ clk_bulk_disable_unprepare(imx_pcie->drvdata->clks_cnt, imx_pcie->clks);
}
-static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
+static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie)
{
- reset_control_assert(imx6_pcie->pciephy_reset);
- reset_control_assert(imx6_pcie->apps_reset);
+ reset_control_assert(imx_pcie->pciephy_reset);
+ reset_control_assert(imx_pcie->apps_reset);
- switch (imx6_pcie->drvdata->variant) {
+ switch (imx_pcie->drvdata->variant) {
case IMX6SX:
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
/* Force PCIe PHY reset */
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR5,
IMX6SX_GPR5_PCIE_BTNRST_RESET,
IMX6SX_GPR5_PCIE_BTNRST_RESET);
break;
case IMX6QP:
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_SW_RST,
IMX6Q_GPR1_PCIE_SW_RST);
break;
case IMX6Q:
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
break;
default:
@@ -721,47 +721,47 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
}
/* Some boards don't have PCIe reset GPIO. */
- if (gpio_is_valid(imx6_pcie->reset_gpio))
- gpio_set_value_cansleep(imx6_pcie->reset_gpio,
- imx6_pcie->gpio_active_high);
+ if (gpio_is_valid(imx_pcie->reset_gpio))
+ gpio_set_value_cansleep(imx_pcie->reset_gpio,
+ imx_pcie->gpio_active_high);
}
-static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
+static int imx_pcie_deassert_core_reset(struct imx_pcie *imx_pcie)
{
- struct dw_pcie *pci = imx6_pcie->pci;
+ struct dw_pcie *pci = imx_pcie->pci;
struct device *dev = pci->dev;
- reset_control_deassert(imx6_pcie->pciephy_reset);
+ reset_control_deassert(imx_pcie->pciephy_reset);
- switch (imx6_pcie->drvdata->variant) {
+ switch (imx_pcie->drvdata->variant) {
case IMX7D:
/* Workaround for ERR010728, failure of PCI-e PLL VCO to
* oscillate, especially when cold. This turns off "Duty-cycle
* Corrector" and other mysterious undocumented things.
*/
- if (likely(imx6_pcie->phy_base)) {
+ if (likely(imx_pcie->phy_base)) {
/* De-assert DCC_FB_EN */
writel(PCIE_PHY_CMN_REG4_DCC_FB_EN,
- imx6_pcie->phy_base + PCIE_PHY_CMN_REG4);
+ imx_pcie->phy_base + PCIE_PHY_CMN_REG4);
/* Assert RX_EQS and RX_EQS_SEL */
writel(PCIE_PHY_CMN_REG24_RX_EQ_SEL
| PCIE_PHY_CMN_REG24_RX_EQ,
- imx6_pcie->phy_base + PCIE_PHY_CMN_REG24);
+ imx_pcie->phy_base + PCIE_PHY_CMN_REG24);
/* Assert ATT_MODE */
writel(PCIE_PHY_CMN_REG26_ATT_MODE,
- imx6_pcie->phy_base + PCIE_PHY_CMN_REG26);
+ imx_pcie->phy_base + PCIE_PHY_CMN_REG26);
} else {
dev_warn(dev, "Unable to apply ERR010728 workaround. DT missing fsl,imx7d-pcie-phy phandle ?\n");
}
- imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie);
+ imx7d_pcie_wait_for_phy_pll_lock(imx_pcie);
break;
case IMX6SX:
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR5,
IMX6SX_GPR5_PCIE_BTNRST_RESET, 0);
break;
case IMX6QP:
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_SW_RST, 0);
usleep_range(200, 500);
@@ -771,10 +771,10 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
}
/* Some boards don't have PCIe reset GPIO. */
- if (gpio_is_valid(imx6_pcie->reset_gpio)) {
+ if (gpio_is_valid(imx_pcie->reset_gpio)) {
msleep(100);
- gpio_set_value_cansleep(imx6_pcie->reset_gpio,
- !imx6_pcie->gpio_active_high);
+ gpio_set_value_cansleep(imx_pcie->reset_gpio,
+ !imx_pcie->gpio_active_high);
/* Wait for 100ms after PERST# deassertion (PCIe r5.0, 6.6.1) */
msleep(100);
}
@@ -782,9 +782,9 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
return 0;
}
-static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
+static int imx_pcie_wait_for_speed_change(struct imx_pcie *imx_pcie)
{
- struct dw_pcie *pci = imx6_pcie->pci;
+ struct dw_pcie *pci = imx_pcie->pci;
struct device *dev = pci->dev;
u32 tmp;
unsigned int retries;
@@ -801,33 +801,33 @@ static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
return -ETIMEDOUT;
}
-static void imx6_pcie_ltssm_enable(struct device *dev)
+static void imx_pcie_ltssm_enable(struct device *dev)
{
- struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
- const struct imx6_pcie_drvdata *drvdata = imx6_pcie->drvdata;
+ struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
+ const struct imx_pcie_drvdata *drvdata = imx_pcie->drvdata;
if (drvdata->ltssm_mask)
- regmap_update_bits(imx6_pcie->iomuxc_gpr, drvdata->ltssm_off, drvdata->ltssm_mask,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, drvdata->ltssm_off, drvdata->ltssm_mask,
drvdata->ltssm_mask);
- reset_control_deassert(imx6_pcie->apps_reset);
+ reset_control_deassert(imx_pcie->apps_reset);
}
-static void imx6_pcie_ltssm_disable(struct device *dev)
+static void imx_pcie_ltssm_disable(struct device *dev)
{
- struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
- const struct imx6_pcie_drvdata *drvdata = imx6_pcie->drvdata;
+ struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
+ const struct imx_pcie_drvdata *drvdata = imx_pcie->drvdata;
if (drvdata->ltssm_mask)
- regmap_update_bits(imx6_pcie->iomuxc_gpr, drvdata->ltssm_off,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, drvdata->ltssm_off,
drvdata->ltssm_mask, 0);
- reset_control_assert(imx6_pcie->apps_reset);
+ reset_control_assert(imx_pcie->apps_reset);
}
-static int imx6_pcie_start_link(struct dw_pcie *pci)
+static int imx_pcie_start_link(struct dw_pcie *pci)
{
- struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
+ struct imx_pcie *imx_pcie = to_imx_pcie(pci);
struct device *dev = pci->dev;
u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
u32 tmp;
@@ -846,7 +846,7 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
dw_pcie_dbi_ro_wr_dis(pci);
/* Start LTSSM. */
- imx6_pcie_ltssm_enable(dev);
+ imx_pcie_ltssm_enable(dev);
ret = dw_pcie_wait_for_link(pci);
if (ret)
@@ -869,8 +869,8 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
dw_pcie_dbi_ro_wr_dis(pci);
- if (imx6_pcie->drvdata->flags &
- IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE) {
+ if (imx_pcie->drvdata->flags &
+ IMX_PCIE_FLAG_IMX_SPEED_CHANGE) {
/*
* On i.MX7, DIRECT_SPEED_CHANGE behaves differently
* from i.MX6 family when no link speed transition
@@ -880,7 +880,7 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
* failure.
*/
- ret = imx6_pcie_wait_for_speed_change(imx6_pcie);
+ ret = imx_pcie_wait_for_speed_change(imx_pcie);
if (ret) {
dev_err(dev, "Failed to bring link up!\n");
goto err_reset_phy;
@@ -895,37 +895,37 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
dev_info(dev, "Link: Only Gen1 is enabled\n");
}
- imx6_pcie->link_is_up = true;
+ imx_pcie->link_is_up = true;
tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
dev_info(dev, "Link up, Gen%i\n", tmp & PCI_EXP_LNKSTA_CLS);
return 0;
err_reset_phy:
- imx6_pcie->link_is_up = false;
+ imx_pcie->link_is_up = false;
dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n",
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
- imx6_pcie_reset_phy(imx6_pcie);
+ imx_pcie_reset_phy(imx_pcie);
return 0;
}
-static void imx6_pcie_stop_link(struct dw_pcie *pci)
+static void imx_pcie_stop_link(struct dw_pcie *pci)
{
struct device *dev = pci->dev;
/* Turn off PCIe LTSSM */
- imx6_pcie_ltssm_disable(dev);
+ imx_pcie_ltssm_disable(dev);
}
-static int imx6_pcie_host_init(struct dw_pcie_rp *pp)
+static int imx_pcie_host_init(struct dw_pcie_rp *pp)
{
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
struct device *dev = pci->dev;
- struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
+ struct imx_pcie *imx_pcie = to_imx_pcie(pci);
int ret;
- if (imx6_pcie->vpcie) {
- ret = regulator_enable(imx6_pcie->vpcie);
+ if (imx_pcie->vpcie) {
+ ret = regulator_enable(imx_pcie->vpcie);
if (ret) {
dev_err(dev, "failed to enable vpcie regulator: %d\n",
ret);
@@ -933,83 +933,83 @@ static int imx6_pcie_host_init(struct dw_pcie_rp *pp)
}
}
- imx6_pcie_assert_core_reset(imx6_pcie);
+ imx_pcie_assert_core_reset(imx_pcie);
- if (imx6_pcie->drvdata->init_phy)
- imx6_pcie->drvdata->init_phy(imx6_pcie);
+ if (imx_pcie->drvdata->init_phy)
+ imx_pcie->drvdata->init_phy(imx_pcie);
- imx6_pcie_configure_type(imx6_pcie);
+ imx_pcie_configure_type(imx_pcie);
- ret = imx6_pcie_clk_enable(imx6_pcie);
+ ret = imx_pcie_clk_enable(imx_pcie);
if (ret) {
dev_err(dev, "unable to enable pcie clocks: %d\n", ret);
goto err_reg_disable;
}
- if (imx6_pcie->phy) {
- ret = phy_init(imx6_pcie->phy);
+ if (imx_pcie->phy) {
+ ret = phy_init(imx_pcie->phy);
if (ret) {
dev_err(dev, "pcie PHY power up failed\n");
goto err_clk_disable;
}
}
- if (imx6_pcie->phy) {
- ret = phy_power_on(imx6_pcie->phy);
+ if (imx_pcie->phy) {
+ ret = phy_power_on(imx_pcie->phy);
if (ret) {
dev_err(dev, "waiting for PHY ready timeout!\n");
goto err_phy_off;
}
}
- ret = imx6_pcie_deassert_core_reset(imx6_pcie);
+ ret = imx_pcie_deassert_core_reset(imx_pcie);
if (ret < 0) {
dev_err(dev, "pcie deassert core reset failed: %d\n", ret);
goto err_phy_off;
}
- imx6_setup_phy_mpll(imx6_pcie);
+ imx_setup_phy_mpll(imx_pcie);
return 0;
err_phy_off:
- if (imx6_pcie->phy)
- phy_exit(imx6_pcie->phy);
+ if (imx_pcie->phy)
+ phy_exit(imx_pcie->phy);
err_clk_disable:
- imx6_pcie_clk_disable(imx6_pcie);
+ imx_pcie_clk_disable(imx_pcie);
err_reg_disable:
- if (imx6_pcie->vpcie)
- regulator_disable(imx6_pcie->vpcie);
+ if (imx_pcie->vpcie)
+ regulator_disable(imx_pcie->vpcie);
return ret;
}
-static void imx6_pcie_host_exit(struct dw_pcie_rp *pp)
+static void imx_pcie_host_exit(struct dw_pcie_rp *pp)
{
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
- struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
+ struct imx_pcie *imx_pcie = to_imx_pcie(pci);
- if (imx6_pcie->phy) {
- if (phy_power_off(imx6_pcie->phy))
+ if (imx_pcie->phy) {
+ if (phy_power_off(imx_pcie->phy))
dev_err(pci->dev, "unable to power off PHY\n");
- phy_exit(imx6_pcie->phy);
+ phy_exit(imx_pcie->phy);
}
- imx6_pcie_clk_disable(imx6_pcie);
+ imx_pcie_clk_disable(imx_pcie);
- if (imx6_pcie->vpcie)
- regulator_disable(imx6_pcie->vpcie);
+ if (imx_pcie->vpcie)
+ regulator_disable(imx_pcie->vpcie);
}
-static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
- .init = imx6_pcie_host_init,
- .deinit = imx6_pcie_host_exit,
+static const struct dw_pcie_host_ops imx_pcie_host_ops = {
+ .init = imx_pcie_host_init,
+ .deinit = imx_pcie_host_exit,
};
static const struct dw_pcie_ops dw_pcie_ops = {
- .start_link = imx6_pcie_start_link,
- .stop_link = imx6_pcie_stop_link,
+ .start_link = imx_pcie_start_link,
+ .stop_link = imx_pcie_stop_link,
};
-static void imx6_pcie_ep_init(struct dw_pcie_ep *ep)
+static void imx_pcie_ep_init(struct dw_pcie_ep *ep)
{
enum pci_barno bar;
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
@@ -1018,7 +1018,7 @@ static void imx6_pcie_ep_init(struct dw_pcie_ep *ep)
dw_pcie_ep_reset_bar(pci, bar);
}
-static int imx6_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
+static int imx_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
unsigned int type, u16 interrupt_num)
{
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
@@ -1065,35 +1065,35 @@ static const struct pci_epc_features imx95_pcie_epc_features = {
};
static const struct pci_epc_features*
-imx6_pcie_ep_get_features(struct dw_pcie_ep *ep)
+imx_pcie_ep_get_features(struct dw_pcie_ep *ep)
{
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
- struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
+ struct imx_pcie *imx_pcie = to_imx_pcie(pci);
- return imx6_pcie->drvdata->epc_features;
+ return imx_pcie->drvdata->epc_features;
}
static const struct dw_pcie_ep_ops pcie_ep_ops = {
- .init = imx6_pcie_ep_init,
- .raise_irq = imx6_pcie_ep_raise_irq,
- .get_features = imx6_pcie_ep_get_features,
+ .init = imx_pcie_ep_init,
+ .raise_irq = imx_pcie_ep_raise_irq,
+ .get_features = imx_pcie_ep_get_features,
};
-static int imx6_add_pcie_ep(struct imx6_pcie *imx6_pcie,
+static int imx_add_pcie_ep(struct imx_pcie *imx_pcie,
struct platform_device *pdev)
{
int ret;
unsigned int pcie_dbi2_offset;
struct dw_pcie_ep *ep;
- struct dw_pcie *pci = imx6_pcie->pci;
+ struct dw_pcie *pci = imx_pcie->pci;
struct dw_pcie_rp *pp = &pci->pp;
struct device *dev = pci->dev;
- imx6_pcie_host_init(pp);
+ imx_pcie_host_init(pp);
ep = &pci->ep;
ep->ops = &pcie_ep_ops;
- switch (imx6_pcie->drvdata->variant) {
+ switch (imx_pcie->drvdata->variant) {
case IMX8MQ_EP:
case IMX8MM_EP:
case IMX8MP_EP:
@@ -1115,10 +1115,10 @@ static int imx6_add_pcie_ep(struct imx6_pcie *imx6_pcie,
if (device_property_match_string(dev, "reg-names", "dbi2") >= 0)
pci->dbi_base2 = NULL;
- if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_SUPPORT_64BIT))
+ if (imx_check_flag(imx_pcie, IMX_PCIE_FLAG_SUPPORT_64BIT))
dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
- ep->page_size = imx6_pcie->drvdata->epc_features->align;
+ ep->page_size = imx_pcie->drvdata->epc_features->align;
ret = dw_pcie_ep_init(ep);
if (ret) {
@@ -1126,30 +1126,30 @@ static int imx6_add_pcie_ep(struct imx6_pcie *imx6_pcie,
return ret;
}
/* Start LTSSM. */
- imx6_pcie_ltssm_enable(dev);
+ imx_pcie_ltssm_enable(dev);
return 0;
}
-static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
+static void imx_pcie_pm_turnoff(struct imx_pcie *imx_pcie)
{
- struct device *dev = imx6_pcie->pci->dev;
+ struct device *dev = imx_pcie->pci->dev;
/* Some variants have a turnoff reset in DT */
- if (imx6_pcie->turnoff_reset) {
- reset_control_assert(imx6_pcie->turnoff_reset);
- reset_control_deassert(imx6_pcie->turnoff_reset);
+ if (imx_pcie->turnoff_reset) {
+ reset_control_assert(imx_pcie->turnoff_reset);
+ reset_control_deassert(imx_pcie->turnoff_reset);
goto pm_turnoff_sleep;
}
/* Others poke directly at IOMUXC registers */
- switch (imx6_pcie->drvdata->variant) {
+ switch (imx_pcie->drvdata->variant) {
case IMX6SX:
case IMX6QP:
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_PM_TURN_OFF,
IMX6SX_GPR12_PCIE_PM_TURN_OFF);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_PM_TURN_OFF, 0);
break;
default:
@@ -1168,73 +1168,73 @@ static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
usleep_range(1000, 10000);
}
-static void imx6_pcie_msi_save_restore(struct imx6_pcie *imx6_pcie, bool save)
+static void imx_pcie_msi_save_restore(struct imx_pcie *imx_pcie, bool save)
{
u8 offset;
u16 val;
- struct dw_pcie *pci = imx6_pcie->pci;
+ struct dw_pcie *pci = imx_pcie->pci;
if (pci_msi_enabled()) {
offset = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI);
if (save) {
val = dw_pcie_readw_dbi(pci, offset + PCI_MSI_FLAGS);
- imx6_pcie->msi_ctrl = val;
+ imx_pcie->msi_ctrl = val;
} else {
dw_pcie_dbi_ro_wr_en(pci);
- val = imx6_pcie->msi_ctrl;
+ val = imx_pcie->msi_ctrl;
dw_pcie_writew_dbi(pci, offset + PCI_MSI_FLAGS, val);
dw_pcie_dbi_ro_wr_dis(pci);
}
}
}
-static int imx6_pcie_suspend_noirq(struct device *dev)
+static int imx_pcie_suspend_noirq(struct device *dev)
{
- struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
- struct dw_pcie_rp *pp = &imx6_pcie->pci->pp;
+ struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
+ struct dw_pcie_rp *pp = &imx_pcie->pci->pp;
- if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND))
+ if (!(imx_pcie->drvdata->flags & IMX_PCIE_FLAG_SUPPORTS_SUSPEND))
return 0;
- imx6_pcie_msi_save_restore(imx6_pcie, true);
- imx6_pcie_pm_turnoff(imx6_pcie);
- imx6_pcie_stop_link(imx6_pcie->pci);
- imx6_pcie_host_exit(pp);
+ imx_pcie_msi_save_restore(imx_pcie, true);
+ imx_pcie_pm_turnoff(imx_pcie);
+ imx_pcie_stop_link(imx_pcie->pci);
+ imx_pcie_host_exit(pp);
return 0;
}
-static int imx6_pcie_resume_noirq(struct device *dev)
+static int imx_pcie_resume_noirq(struct device *dev)
{
int ret;
- struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
- struct dw_pcie_rp *pp = &imx6_pcie->pci->pp;
+ struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
+ struct dw_pcie_rp *pp = &imx_pcie->pci->pp;
- if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND))
+ if (!(imx_pcie->drvdata->flags & IMX_PCIE_FLAG_SUPPORTS_SUSPEND))
return 0;
- ret = imx6_pcie_host_init(pp);
+ ret = imx_pcie_host_init(pp);
if (ret)
return ret;
- imx6_pcie_msi_save_restore(imx6_pcie, false);
+ imx_pcie_msi_save_restore(imx_pcie, false);
dw_pcie_setup_rc(pp);
- if (imx6_pcie->link_is_up)
- imx6_pcie_start_link(imx6_pcie->pci);
+ if (imx_pcie->link_is_up)
+ imx_pcie_start_link(imx_pcie->pci);
return 0;
}
-static const struct dev_pm_ops imx6_pcie_pm_ops = {
- NOIRQ_SYSTEM_SLEEP_PM_OPS(imx6_pcie_suspend_noirq,
- imx6_pcie_resume_noirq)
+static const struct dev_pm_ops imx_pcie_pm_ops = {
+ NOIRQ_SYSTEM_SLEEP_PM_OPS(imx_pcie_suspend_noirq,
+ imx_pcie_resume_noirq)
};
-static int imx6_pcie_probe(struct platform_device *pdev)
+static int imx_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct dw_pcie *pci;
- struct imx6_pcie *imx6_pcie;
+ struct imx_pcie *imx_pcie;
struct device_node *np;
struct resource *dbi_base;
struct device_node *node = dev->of_node;
@@ -1242,8 +1242,8 @@ static int imx6_pcie_probe(struct platform_device *pdev)
u16 val;
int i;
- imx6_pcie = devm_kzalloc(dev, sizeof(*imx6_pcie), GFP_KERNEL);
- if (!imx6_pcie)
+ imx_pcie = devm_kzalloc(dev, sizeof(*imx_pcie), GFP_KERNEL);
+ if (!imx_pcie)
return -ENOMEM;
pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
@@ -1252,10 +1252,10 @@ static int imx6_pcie_probe(struct platform_device *pdev)
pci->dev = dev;
pci->ops = &dw_pcie_ops;
- pci->pp.ops = &imx6_pcie_host_ops;
+ pci->pp.ops = &imx_pcie_host_ops;
- imx6_pcie->pci = pci;
- imx6_pcie->drvdata = of_device_get_match_data(dev);
+ imx_pcie->pci = pci;
+ imx_pcie->drvdata = of_device_get_match_data(dev);
/* Find the PHY if one is defined, only imx7d uses it */
np = of_parse_phandle(node, "fsl,imx7d-pcie-phy", 0);
@@ -1267,9 +1267,9 @@ static int imx6_pcie_probe(struct platform_device *pdev)
dev_err(dev, "Unable to map PCIe PHY\n");
return ret;
}
- imx6_pcie->phy_base = devm_ioremap_resource(dev, &res);
- if (IS_ERR(imx6_pcie->phy_base))
- return PTR_ERR(imx6_pcie->phy_base);
+ imx_pcie->phy_base = devm_ioremap_resource(dev, &res);
+ if (IS_ERR(imx_pcie->phy_base))
+ return PTR_ERR(imx_pcie->phy_base);
}
pci->dbi_base = devm_platform_get_and_ioremap_resource(pdev, 0, &dbi_base);
@@ -1277,12 +1277,12 @@ static int imx6_pcie_probe(struct platform_device *pdev)
return PTR_ERR(pci->dbi_base);
/* Fetch GPIOs */
- imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0);
- imx6_pcie->gpio_active_high = of_property_read_bool(node,
+ imx_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0);
+ imx_pcie->gpio_active_high = of_property_read_bool(node,
"reset-gpio-active-high");
- if (gpio_is_valid(imx6_pcie->reset_gpio)) {
- ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio,
- imx6_pcie->gpio_active_high ?
+ if (gpio_is_valid(imx_pcie->reset_gpio)) {
+ ret = devm_gpio_request_one(dev, imx_pcie->reset_gpio,
+ imx_pcie->gpio_active_high ?
GPIOF_OUT_INIT_HIGH :
GPIOF_OUT_INIT_LOW,
"PCIe reset");
@@ -1290,70 +1290,70 @@ static int imx6_pcie_probe(struct platform_device *pdev)
dev_err(dev, "unable to get reset gpio\n");
return ret;
}
- } else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) {
- return imx6_pcie->reset_gpio;
+ } else if (imx_pcie->reset_gpio == -EPROBE_DEFER) {
+ return imx_pcie->reset_gpio;
}
- if (imx6_pcie->drvdata->clks_cnt >= IMX6_PCIE_MAX_CLKS)
+ if (imx_pcie->drvdata->clks_cnt >= IMX_PCIE_MAX_CLKS)
return dev_err_probe(dev, -ENOMEM, "clks_cnt is too big\n");
- for (i = 0; i < imx6_pcie->drvdata->clks_cnt; i++)
- imx6_pcie->clks[i].id = imx6_pcie->drvdata->clk_names[i];
+ for (i = 0; i < imx_pcie->drvdata->clks_cnt; i++)
+ imx_pcie->clks[i].id = imx_pcie->drvdata->clk_names[i];
/* Fetch clocks */
- ret = devm_clk_bulk_get(dev, imx6_pcie->drvdata->clks_cnt, imx6_pcie->clks);
+ ret = devm_clk_bulk_get(dev, imx_pcie->drvdata->clks_cnt, imx_pcie->clks);
if (ret)
return ret;
- if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_PHYDRV)) {
- imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
- if (IS_ERR(imx6_pcie->phy))
- return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy),
+ if (imx_check_flag(imx_pcie, IMX_PCIE_FLAG_HAS_PHYDRV)) {
+ imx_pcie->phy = devm_phy_get(dev, "pcie-phy");
+ if (IS_ERR(imx_pcie->phy))
+ return dev_err_probe(dev, PTR_ERR(imx_pcie->phy),
"failed to get pcie phy\n");
}
- if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_APP_RESET)) {
- imx6_pcie->apps_reset = devm_reset_control_get_exclusive(dev, "apps");
- if (IS_ERR(imx6_pcie->apps_reset))
- return dev_err_probe(dev, PTR_ERR(imx6_pcie->apps_reset),
+ if (imx_check_flag(imx_pcie, IMX_PCIE_FLAG_HAS_APP_RESET)) {
+ imx_pcie->apps_reset = devm_reset_control_get_exclusive(dev, "apps");
+ if (IS_ERR(imx_pcie->apps_reset))
+ return dev_err_probe(dev, PTR_ERR(imx_pcie->apps_reset),
"failed to get pcie apps reset control\n");
}
- if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_PHY_RESET)) {
- imx6_pcie->pciephy_reset = devm_reset_control_get_exclusive(dev, "pciephy");
- if (IS_ERR(imx6_pcie->pciephy_reset))
- return dev_err_probe(dev, PTR_ERR(imx6_pcie->pciephy_reset),
+ if (imx_check_flag(imx_pcie, IMX_PCIE_FLAG_HAS_PHY_RESET)) {
+ imx_pcie->pciephy_reset = devm_reset_control_get_exclusive(dev, "pciephy");
+ if (IS_ERR(imx_pcie->pciephy_reset))
+ return dev_err_probe(dev, PTR_ERR(imx_pcie->pciephy_reset),
"Failed to get PCIEPHY reset control\n");
}
- switch (imx6_pcie->drvdata->variant) {
+ switch (imx_pcie->drvdata->variant) {
case IMX8MQ:
case IMX8MQ_EP:
case IMX7D:
if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
- imx6_pcie->controller_id = 1;
+ imx_pcie->controller_id = 1;
break;
default:
break;
}
/* Grab turnoff reset */
- imx6_pcie->turnoff_reset = devm_reset_control_get_optional_exclusive(dev, "turnoff");
- if (IS_ERR(imx6_pcie->turnoff_reset)) {
+ imx_pcie->turnoff_reset = devm_reset_control_get_optional_exclusive(dev, "turnoff");
+ if (IS_ERR(imx_pcie->turnoff_reset)) {
dev_err(dev, "Failed to get TURNOFF reset control\n");
- return PTR_ERR(imx6_pcie->turnoff_reset);
+ return PTR_ERR(imx_pcie->turnoff_reset);
}
- if (imx6_pcie->drvdata->gpr) {
+ if (imx_pcie->drvdata->gpr) {
/* Grab GPR config register range */
- imx6_pcie->iomuxc_gpr =
- syscon_regmap_lookup_by_compatible(imx6_pcie->drvdata->gpr);
- if (IS_ERR(imx6_pcie->iomuxc_gpr))
- return dev_err_probe(dev, PTR_ERR(imx6_pcie->iomuxc_gpr),
+ imx_pcie->iomuxc_gpr =
+ syscon_regmap_lookup_by_compatible(imx_pcie->drvdata->gpr);
+ if (IS_ERR(imx_pcie->iomuxc_gpr))
+ return dev_err_probe(dev, PTR_ERR(imx_pcie->iomuxc_gpr),
"unable to find iomuxc registers\n");
}
- if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_SERDES)) {
+ if (imx_check_flag(imx_pcie, IMX_PCIE_FLAG_HAS_SERDES)) {
void __iomem *off = devm_platform_ioremap_resource_byname(pdev, "app");
if (IS_ERR(off))
@@ -1366,59 +1366,59 @@ static int imx6_pcie_probe(struct platform_device *pdev)
.reg_stride = 4,
};
- imx6_pcie->iomuxc_gpr = devm_regmap_init_mmio(dev, off, ®map_config);
- if (IS_ERR(imx6_pcie->iomuxc_gpr))
- return dev_err_probe(dev, PTR_ERR(imx6_pcie->iomuxc_gpr),
+ imx_pcie->iomuxc_gpr = devm_regmap_init_mmio(dev, off, ®map_config);
+ if (IS_ERR(imx_pcie->iomuxc_gpr))
+ return dev_err_probe(dev, PTR_ERR(imx_pcie->iomuxc_gpr),
"unable to find iomuxc registers\n");
}
/* Grab PCIe PHY Tx Settings */
if (of_property_read_u32(node, "fsl,tx-deemph-gen1",
- &imx6_pcie->tx_deemph_gen1))
- imx6_pcie->tx_deemph_gen1 = 0;
+ &imx_pcie->tx_deemph_gen1))
+ imx_pcie->tx_deemph_gen1 = 0;
if (of_property_read_u32(node, "fsl,tx-deemph-gen2-3p5db",
- &imx6_pcie->tx_deemph_gen2_3p5db))
- imx6_pcie->tx_deemph_gen2_3p5db = 0;
+ &imx_pcie->tx_deemph_gen2_3p5db))
+ imx_pcie->tx_deemph_gen2_3p5db = 0;
if (of_property_read_u32(node, "fsl,tx-deemph-gen2-6db",
- &imx6_pcie->tx_deemph_gen2_6db))
- imx6_pcie->tx_deemph_gen2_6db = 20;
+ &imx_pcie->tx_deemph_gen2_6db))
+ imx_pcie->tx_deemph_gen2_6db = 20;
if (of_property_read_u32(node, "fsl,tx-swing-full",
- &imx6_pcie->tx_swing_full))
- imx6_pcie->tx_swing_full = 127;
+ &imx_pcie->tx_swing_full))
+ imx_pcie->tx_swing_full = 127;
if (of_property_read_u32(node, "fsl,tx-swing-low",
- &imx6_pcie->tx_swing_low))
- imx6_pcie->tx_swing_low = 127;
+ &imx_pcie->tx_swing_low))
+ imx_pcie->tx_swing_low = 127;
/* Limit link speed */
pci->link_gen = 1;
of_property_read_u32(node, "fsl,max-link-speed", &pci->link_gen);
- imx6_pcie->vpcie = devm_regulator_get_optional(&pdev->dev, "vpcie");
- if (IS_ERR(imx6_pcie->vpcie)) {
- if (PTR_ERR(imx6_pcie->vpcie) != -ENODEV)
- return PTR_ERR(imx6_pcie->vpcie);
- imx6_pcie->vpcie = NULL;
+ imx_pcie->vpcie = devm_regulator_get_optional(&pdev->dev, "vpcie");
+ if (IS_ERR(imx_pcie->vpcie)) {
+ if (PTR_ERR(imx_pcie->vpcie) != -ENODEV)
+ return PTR_ERR(imx_pcie->vpcie);
+ imx_pcie->vpcie = NULL;
}
- imx6_pcie->vph = devm_regulator_get_optional(&pdev->dev, "vph");
- if (IS_ERR(imx6_pcie->vph)) {
- if (PTR_ERR(imx6_pcie->vph) != -ENODEV)
- return PTR_ERR(imx6_pcie->vph);
- imx6_pcie->vph = NULL;
+ imx_pcie->vph = devm_regulator_get_optional(&pdev->dev, "vph");
+ if (IS_ERR(imx_pcie->vph)) {
+ if (PTR_ERR(imx_pcie->vph) != -ENODEV)
+ return PTR_ERR(imx_pcie->vph);
+ imx_pcie->vph = NULL;
}
- platform_set_drvdata(pdev, imx6_pcie);
+ platform_set_drvdata(pdev, imx_pcie);
- ret = imx6_pcie_attach_pd(dev);
+ ret = imx_pcie_attach_pd(dev);
if (ret)
return ret;
- if (imx6_pcie->drvdata->mode == DW_PCIE_EP_TYPE) {
- ret = imx6_add_pcie_ep(imx6_pcie, pdev);
+ if (imx_pcie->drvdata->mode == DW_PCIE_EP_TYPE) {
+ ret = imx_add_pcie_ep(imx_pcie, pdev);
if (ret < 0)
return ret;
} else {
@@ -1438,12 +1438,12 @@ static int imx6_pcie_probe(struct platform_device *pdev)
return 0;
}
-static void imx6_pcie_shutdown(struct platform_device *pdev)
+static void imx_pcie_shutdown(struct platform_device *pdev)
{
- struct imx6_pcie *imx6_pcie = platform_get_drvdata(pdev);
+ struct imx_pcie *imx_pcie = platform_get_drvdata(pdev);
/* bring down link, so bootloader gets clean state in case of reboot */
- imx6_pcie_assert_core_reset(imx6_pcie);
+ imx_pcie_assert_core_reset(imx_pcie);
}
static const char * const imx6q_clks[] = {"pcie_bus", "pcie", "pcie_phy"};
@@ -1451,11 +1451,11 @@ static const char * const imx8mm_clks[] = {"pcie_bus", "pcie", "pcie_aux"};
static const char * const imx8mq_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_aux"};
static const char * const imx6sx_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_inbound_axi"};
-static const struct imx6_pcie_drvdata drvdata[] = {
+static const struct imx_pcie_drvdata drvdata[] = {
[IMX6Q] = {
.variant = IMX6Q,
- .flags = IMX6_PCIE_FLAG_IMX6_PHY |
- IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE,
+ .flags = IMX_PCIE_FLAG_IMX_PHY |
+ IMX_PCIE_FLAG_IMX_SPEED_CHANGE,
.dbi_length = 0x200,
.gpr = "fsl,imx6q-iomuxc-gpr",
.clk_names = imx6q_clks,
@@ -1464,13 +1464,13 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
.mode_off[0] = IOMUXC_GPR12,
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
- .init_phy = imx6_pcie_init_phy,
+ .init_phy = imx_pcie_init_phy,
},
[IMX6SX] = {
.variant = IMX6SX,
- .flags = IMX6_PCIE_FLAG_IMX6_PHY |
- IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE |
- IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+ .flags = IMX_PCIE_FLAG_IMX_PHY |
+ IMX_PCIE_FLAG_IMX_SPEED_CHANGE |
+ IMX_PCIE_FLAG_SUPPORTS_SUSPEND,
.gpr = "fsl,imx6q-iomuxc-gpr",
.clk_names = imx6sx_clks,
.clks_cnt = ARRAY_SIZE(imx6sx_clks),
@@ -1482,9 +1482,9 @@ static const struct imx6_pcie_drvdata drvdata[] = {
},
[IMX6QP] = {
.variant = IMX6QP,
- .flags = IMX6_PCIE_FLAG_IMX6_PHY |
- IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE |
- IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+ .flags = IMX_PCIE_FLAG_IMX_PHY |
+ IMX_PCIE_FLAG_IMX_SPEED_CHANGE |
+ IMX_PCIE_FLAG_SUPPORTS_SUSPEND,
.dbi_length = 0x200,
.gpr = "fsl,imx6q-iomuxc-gpr",
.clk_names = imx6q_clks,
@@ -1493,13 +1493,13 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
.mode_off[0] = IOMUXC_GPR12,
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
- .init_phy = imx6_pcie_init_phy,
+ .init_phy = imx_pcie_init_phy,
},
[IMX7D] = {
.variant = IMX7D,
- .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
- IMX6_PCIE_FLAG_HAS_APP_RESET |
- IMX6_PCIE_FLAG_HAS_PHY_RESET,
+ .flags = IMX_PCIE_FLAG_SUPPORTS_SUSPEND |
+ IMX_PCIE_FLAG_HAS_APP_RESET |
+ IMX_PCIE_FLAG_HAS_PHY_RESET,
.gpr = "fsl,imx7d-iomuxc-gpr",
.clk_names = imx6q_clks,
.clks_cnt = ARRAY_SIZE(imx6q_clks),
@@ -1509,8 +1509,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
},
[IMX8MQ] = {
.variant = IMX8MQ,
- .flags = IMX6_PCIE_FLAG_HAS_APP_RESET |
- IMX6_PCIE_FLAG_HAS_PHY_RESET,
+ .flags = IMX_PCIE_FLAG_HAS_APP_RESET |
+ IMX_PCIE_FLAG_HAS_PHY_RESET,
.gpr = "fsl,imx8mq-iomuxc-gpr",
.clk_names = imx8mq_clks,
.clks_cnt = ARRAY_SIZE(imx8mq_clks),
@@ -1522,9 +1522,9 @@ static const struct imx6_pcie_drvdata drvdata[] = {
},
[IMX8MM] = {
.variant = IMX8MM,
- .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
- IMX6_PCIE_FLAG_HAS_PHYDRV |
- IMX6_PCIE_FLAG_HAS_APP_RESET,
+ .flags = IMX_PCIE_FLAG_SUPPORTS_SUSPEND |
+ IMX_PCIE_FLAG_HAS_PHYDRV |
+ IMX_PCIE_FLAG_HAS_APP_RESET,
.gpr = "fsl,imx8mm-iomuxc-gpr",
.clk_names = imx8mm_clks,
.clks_cnt = ARRAY_SIZE(imx8mm_clks),
@@ -1533,9 +1533,9 @@ static const struct imx6_pcie_drvdata drvdata[] = {
},
[IMX8MP] = {
.variant = IMX8MP,
- .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
- IMX6_PCIE_FLAG_HAS_PHYDRV |
- IMX6_PCIE_FLAG_HAS_APP_RESET,
+ .flags = IMX_PCIE_FLAG_SUPPORTS_SUSPEND |
+ IMX_PCIE_FLAG_HAS_PHYDRV |
+ IMX_PCIE_FLAG_HAS_APP_RESET,
.gpr = "fsl,imx8mp-iomuxc-gpr",
.clk_names = imx8mm_clks,
.clks_cnt = ARRAY_SIZE(imx8mm_clks),
@@ -1544,7 +1544,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
},
[IMX95] = {
.variant = IMX95,
- .flags = IMX6_PCIE_FLAG_HAS_SERDES,
+ .flags = IMX_PCIE_FLAG_HAS_SERDES,
.clk_names = imx8mq_clks,
.clks_cnt = ARRAY_SIZE(imx8mq_clks),
.ltssm_off = IMX95_PE0_GEN_CTRL_3,
@@ -1555,8 +1555,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
},
[IMX8MQ_EP] = {
.variant = IMX8MQ_EP,
- .flags = IMX6_PCIE_FLAG_HAS_APP_RESET |
- IMX6_PCIE_FLAG_HAS_PHY_RESET,
+ .flags = IMX_PCIE_FLAG_HAS_APP_RESET |
+ IMX_PCIE_FLAG_HAS_PHY_RESET,
.mode = DW_PCIE_EP_TYPE,
.gpr = "fsl,imx8mq-iomuxc-gpr",
.clk_names = imx8mq_clks,
@@ -1570,8 +1570,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
},
[IMX8MM_EP] = {
.variant = IMX8MM_EP,
- .flags = IMX6_PCIE_FLAG_HAS_APP_RESET |
- IMX6_PCIE_FLAG_HAS_PHYDRV,
+ .flags = IMX_PCIE_FLAG_HAS_APP_RESET |
+ IMX_PCIE_FLAG_HAS_PHYDRV,
.mode = DW_PCIE_EP_TYPE,
.gpr = "fsl,imx8mm-iomuxc-gpr",
.clk_names = imx8mm_clks,
@@ -1582,8 +1582,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
},
[IMX8MP_EP] = {
.variant = IMX8MP_EP,
- .flags = IMX6_PCIE_FLAG_HAS_APP_RESET |
- IMX6_PCIE_FLAG_HAS_PHYDRV,
+ .flags = IMX_PCIE_FLAG_HAS_APP_RESET |
+ IMX_PCIE_FLAG_HAS_PHYDRV,
.mode = DW_PCIE_EP_TYPE,
.gpr = "fsl,imx8mp-iomuxc-gpr",
.clk_names = imx8mm_clks,
@@ -1594,8 +1594,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
},
[IMX95_EP] = {
.variant = IMX95_EP,
- .flags = IMX6_PCIE_FLAG_HAS_SERDES |
- IMX6_PCIE_FLAG_SUPPORT_64BIT,
+ .flags = IMX_PCIE_FLAG_HAS_SERDES |
+ IMX_PCIE_FLAG_SUPPORT_64BIT,
.clk_names = imx8mq_clks,
.clks_cnt = ARRAY_SIZE(imx8mq_clks),
.ltssm_off = IMX95_PE0_GEN_CTRL_3,
@@ -1608,7 +1608,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
},
};
-static const struct of_device_id imx6_pcie_of_match[] = {
+static const struct of_device_id imx_pcie_of_match[] = {
{ .compatible = "fsl,imx6q-pcie", .data = &drvdata[IMX6Q], },
{ .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], },
{ .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], },
@@ -1624,19 +1624,19 @@ static const struct of_device_id imx6_pcie_of_match[] = {
{},
};
-static struct platform_driver imx6_pcie_driver = {
+static struct platform_driver imx_pcie_driver = {
.driver = {
.name = "imx6q-pcie",
- .of_match_table = imx6_pcie_of_match,
+ .of_match_table = imx_pcie_of_match,
.suppress_bind_attrs = true,
- .pm = &imx6_pcie_pm_ops,
+ .pm = &imx_pcie_pm_ops,
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
- .probe = imx6_pcie_probe,
- .shutdown = imx6_pcie_shutdown,
+ .probe = imx_pcie_probe,
+ .shutdown = imx_pcie_shutdown,
};
-static void imx6_pcie_quirk(struct pci_dev *dev)
+static void imx_pcie_quirk(struct pci_dev *dev)
{
struct pci_bus *bus = dev->bus;
struct dw_pcie_rp *pp = bus->sysdata;
@@ -1646,33 +1646,33 @@ static void imx6_pcie_quirk(struct pci_dev *dev)
return;
/* Make sure we only quirk devices associated with this driver */
- if (bus->dev.parent->parent->driver != &imx6_pcie_driver.driver)
+ if (bus->dev.parent->parent->driver != &imx_pcie_driver.driver)
return;
if (pci_is_root_bus(bus)) {
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
- struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
+ struct imx_pcie *imx_pcie = to_imx_pcie(pci);
/*
* Limit config length to avoid the kernel reading beyond
* the register set and causing an abort on i.MX 6Quad
*/
- if (imx6_pcie->drvdata->dbi_length) {
- dev->cfg_size = imx6_pcie->drvdata->dbi_length;
+ if (imx_pcie->drvdata->dbi_length) {
+ dev->cfg_size = imx_pcie->drvdata->dbi_length;
dev_info(&dev->dev, "Limiting cfg_size to %d\n",
dev->cfg_size);
}
}
}
DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_SYNOPSYS, 0xabcd,
- PCI_CLASS_BRIDGE_PCI, 8, imx6_pcie_quirk);
+ PCI_CLASS_BRIDGE_PCI, 8, imx_pcie_quirk);
-static int __init imx6_pcie_init(void)
+static int __init imx_pcie_init(void)
{
#ifdef CONFIG_ARM
struct device_node *np;
- np = of_find_matching_node(NULL, imx6_pcie_of_match);
+ np = of_find_matching_node(NULL, imx_pcie_of_match);
if (!np)
return -ENODEV;
of_node_put(np);
@@ -1688,6 +1688,6 @@ static int __init imx6_pcie_init(void)
"external abort on non-linefetch");
#endif
- return platform_driver_register(&imx6_pcie_driver);
+ return platform_driver_register(&imx_pcie_driver);
}
-device_initcall(imx6_pcie_init);
+device_initcall(imx_pcie_init);
--
2.34.1
^ permalink raw reply related
* [PATCH v3 02/11] PCI: imx6: Fix i.MX8MP PCIe EP can not trigger MSI
From: Frank Li @ 2024-04-02 14:33 UTC (permalink / raw)
To: Richard Zhu, Lucas Stach, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring, Bjorn Helgaas, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, Philipp Zabel, Liam Girdwood, Mark Brown,
Manivannan Sadhasivam, Krzysztof Kozlowski, Conor Dooley
Cc: linux-pci, imx, linux-arm-kernel, linux-kernel, bpf, devicetree,
Frank Li, Jason Liu
In-Reply-To: <20240402-pci2_upstream-v3-0-803414bdb430@nxp.com>
From: Richard Zhu <hongxing.zhu@nxp.com>
Fix i.MX8MP PCIe EP can't trigger MSI issue.
There is one 64Kbytes minimal requirement on i.MX8M PCIe outbound
region configuration.
EP uses Bar0 to set the outboud region to configure the MSI setting.
Set the page_size to "epc_features->align" to meet the requirement,
let the MSI can be triggered successfully.
Fixes: 1bd0d43dcf3b ("PCI: imx6: Clean up addr_space retrieval code")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index e43eda6b33ca7..6c4d25b92225e 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -1118,6 +1118,8 @@ static int imx6_add_pcie_ep(struct imx6_pcie *imx6_pcie,
if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_SUPPORT_64BIT))
dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
+ ep->page_size = imx6_pcie->drvdata->epc_features->align;
+
ret = dw_pcie_ep_init(ep);
if (ret) {
dev_err(dev, "failed to initialize endpoint\n");
--
2.34.1
^ permalink raw reply related
* [PATCH v3 01/11] PCI: imx6: Fix PCIe link down when i.MX8MM and i.MX8MP PCIe is EP mode
From: Frank Li @ 2024-04-02 14:33 UTC (permalink / raw)
To: Richard Zhu, Lucas Stach, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring, Bjorn Helgaas, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, Philipp Zabel, Liam Girdwood, Mark Brown,
Manivannan Sadhasivam, Krzysztof Kozlowski, Conor Dooley
Cc: linux-pci, imx, linux-arm-kernel, linux-kernel, bpf, devicetree,
Frank Li
In-Reply-To: <20240402-pci2_upstream-v3-0-803414bdb430@nxp.com>
From: Richard Zhu <hongxing.zhu@nxp.com>
Both IMX8MM_EP and IMX8MP_EP have the "IMX6_PCIE_FLAG_HAS_APP_RESET"
set indeed. Otherwise, the LTSSM_EN bit wouldn't be asserted anymore.
That's the root cause that PCIe link is down when i.MX8MM and i.MX8MP
PCIe are in the EP mode.
Fixes: 0c9651c21f2a ("PCI: imx6: Simplify reset handling by using *_FLAG_HAS_*_RESET")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 99a60270b26cd..e43eda6b33ca7 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -1568,7 +1568,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
},
[IMX8MM_EP] = {
.variant = IMX8MM_EP,
- .flags = IMX6_PCIE_FLAG_HAS_PHYDRV,
+ .flags = IMX6_PCIE_FLAG_HAS_APP_RESET |
+ IMX6_PCIE_FLAG_HAS_PHYDRV,
.mode = DW_PCIE_EP_TYPE,
.gpr = "fsl,imx8mm-iomuxc-gpr",
.clk_names = imx8mm_clks,
@@ -1579,7 +1580,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
},
[IMX8MP_EP] = {
.variant = IMX8MP_EP,
- .flags = IMX6_PCIE_FLAG_HAS_PHYDRV,
+ .flags = IMX6_PCIE_FLAG_HAS_APP_RESET |
+ IMX6_PCIE_FLAG_HAS_PHYDRV,
.mode = DW_PCIE_EP_TYPE,
.gpr = "fsl,imx8mp-iomuxc-gpr",
.clk_names = imx8mm_clks,
--
2.34.1
^ permalink raw reply related
* [PATCH v3 00/11] PCI: imx6: Fix\rename\clean up and add lut information for imx95
From: Frank Li @ 2024-04-02 14:33 UTC (permalink / raw)
To: Richard Zhu, Lucas Stach, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring, Bjorn Helgaas, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, Philipp Zabel, Liam Girdwood, Mark Brown,
Manivannan Sadhasivam, Krzysztof Kozlowski, Conor Dooley
Cc: linux-pci, imx, linux-arm-kernel, linux-kernel, bpf, devicetree,
Frank Li, Jason Liu
Fixed 8mp EP mode problem.
imx6 actaully for all imx chips (imx6*, imx7*, imx8*, imx9*). To avoid
confuse, rename all imx6_* to imx_*, IMX6_* to IMX_*. pci-imx6.c to
pci-imx.c to avoid confuse.
Using callback to reduce switch case for core reset and refclk.
Add imx95 iommux and its stream id information.
Base on linux-pci/controller/imx
To: Richard Zhu <hongxing.zhu@nxp.com>
To: Lucas Stach <l.stach@pengutronix.de>
To: Lorenzo Pieralisi <lpieralisi@kernel.org>
To: Krzysztof Wilczyński <kw@linux.com>
To: Rob Herring <robh@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>
To: Shawn Guo <shawnguo@kernel.org>
To: Sascha Hauer <s.hauer@pengutronix.de>
To: Pengutronix Kernel Team <kernel@pengutronix.de>
To: Fabio Estevam <festevam@gmail.com>
To: NXP Linux Team <linux-imx@nxp.com>
To: Philipp Zabel <p.zabel@pengutronix.de>
To: Liam Girdwood <lgirdwood@gmail.com>
To: Mark Brown <broonie@kernel.org>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: linux-pci@vger.kernel.org
Cc: imx@lists.linux.dev
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: bpf@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Changes in v3:
- Add an EP fixed patch
PCI: imx6: Fix PCIe link down when i.MX8MM and i.MX8MP PCIe is EP mode
PCI: imx6: Fix i.MX8MP PCIe EP can not trigger MSI
- Add 8qxp rc support
dt-bing yaml pass binding check
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j8 dt_binding_check DT_SCHEMA_FILES=fsl,imx6q-pcie.yaml
LINT Documentation/devicetree/bindings
DTEX Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.example.dts
CHKDT Documentation/devicetree/bindings/processed-schema.json
SCHEMA Documentation/devicetree/bindings/processed-schema.json
DTC_CHK Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.example.dtb
- Link to v2: https://lore.kernel.org/r/20240304-pci2_upstream-v2-0-ad07c5eb6d67@nxp.com
Changes in v2:
- remove file to 'pcie-imx.c'
- keep CONFIG unchange.
- Link to v1: https://lore.kernel.org/r/20240227-pci2_upstream-v1-0-b952f8333606@nxp.com
---
Frank Li (7):
PCI: imx6: Rename imx6_* with imx_*
PCI: imx6: Rename pci-imx6.c to pcie-imx.c
MAINTAINERS: pci: imx: update imx6* to imx* since rename driver file
PCI: imx: Simplify switch-case logic by involve set_ref_clk callback
PCI: imx: Simplify switch-case logic by involve core_reset callback
PCI: imx: Config look up table(LUT) to support MSI ITS and IOMMU for i.MX95
PCI: imx: Consolidate redundant if-checks
Richard Zhu (4):
PCI: imx6: Fix PCIe link down when i.MX8MM and i.MX8MP PCIe is EP mode
PCI: imx6: Fix i.MX8MP PCIe EP can not trigger MSI
dt-bindings: imx6q-pcie: Add i.MX8Q pcie compatible string
PCI: imx6: Add i.MX8Q PCIe support
.../bindings/pci/fsl,imx6q-pcie-common.yaml | 5 +
.../devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 18 +
MAINTAINERS | 4 +-
drivers/pci/controller/dwc/Makefile | 2 +-
.../pci/controller/dwc/{pci-imx6.c => pcie-imx.c} | 1173 ++++++++++++--------
5 files changed, 727 insertions(+), 475 deletions(-)
---
base-commit: 2e45e73eebd43365cb585c49b3a671dcfae6b5b5
change-id: 20240227-pci2_upstream-0cdd19a15163
Best regards,
---
Frank Li <Frank.Li@nxp.com>
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox