* [PATCH v19 4/9] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
From: Krishna Kurapati @ 2024-04-04 5:12 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Bjorn Andersson, Wesley Cheng,
Konrad Dybcio, Greg Kroah-Hartman, Conor Dooley, Thinh Nguyen,
Felipe Balbi, Johan Hovold
Cc: devicetree, linux-arm-msm, linux-usb, linux-kernel, quic_ppratap,
quic_jackp, Krishna Kurapati, Johan Hovold
In-Reply-To: <20240404051229.3082902-1-quic_kriskura@quicinc.com>
Currently the DWC3 driver supports only single port controller
which requires at least one HS PHY and at most one SS PHY.
But the DWC3 USB controller can be connected to multiple ports and
each port can have their own PHYs. Each port of the multiport
controller can either be HS+SS capable or HS only capable
Proper quantification of them is required to modify GUSB2PHYCFG
and GUSB3PIPECTL registers appropriately.
Add support for detecting, obtaining and configuring PHYs supported
by a multiport controller. Limit support to multiport controllers
with up to four ports for now (e.g. as needed for SC8280XP).
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/usb/dwc3/core.c | 251 ++++++++++++++++++++++++++++------------
drivers/usb/dwc3/core.h | 14 ++-
drivers/usb/dwc3/drd.c | 15 ++-
3 files changed, 193 insertions(+), 87 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index b023012b9321..71d6f361b3df 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -124,6 +124,7 @@ static void __dwc3_set_mode(struct work_struct *work)
int ret;
u32 reg;
u32 desired_dr_role;
+ int i;
mutex_lock(&dwc->mutex);
spin_lock_irqsave(&dwc->lock, flags);
@@ -201,8 +202,10 @@ static void __dwc3_set_mode(struct work_struct *work)
} else {
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, true);
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
- phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
+ phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
+ }
if (dwc->dis_split_quirk) {
reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
reg |= DWC3_GUCTL3_SPLITDISABLE;
@@ -217,8 +220,8 @@ static void __dwc3_set_mode(struct work_struct *work)
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, false);
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
- phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE);
ret = dwc3_gadget_init(dwc);
if (ret)
@@ -589,22 +592,14 @@ static int dwc3_core_ulpi_init(struct dwc3 *dwc)
return ret;
}
-/**
- * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
- * @dwc: Pointer to our controller context structure
- *
- * Returns 0 on success. The USB PHY interfaces are configured but not
- * initialized. The PHY interfaces and the PHYs get initialized together with
- * the core in dwc3_core_init.
- */
-static int dwc3_phy_setup(struct dwc3 *dwc)
+static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index)
{
unsigned int hw_mode;
u32 reg;
hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
- reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(index));
/*
* Make sure UX_EXIT_PX is cleared as that causes issues with some
@@ -659,9 +654,19 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->dis_del_phy_power_chg_quirk)
reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
- dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+ dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(index), reg);
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+ return 0;
+}
+
+static int dwc3_hs_phy_setup(struct dwc3 *dwc, int index)
+{
+ unsigned int hw_mode;
+ u32 reg;
+
+ hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(index));
/* Select the HS PHY interface */
switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {
@@ -673,7 +678,7 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
} else if (dwc->hsphy_interface &&
!strncmp(dwc->hsphy_interface, "ulpi", 4)) {
reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg);
} else {
/* Relying on default value. */
if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI))
@@ -740,7 +745,35 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->ulpi_ext_vbus_drv)
reg |= DWC3_GUSB2PHYCFG_ULPIEXTVBUSDRV;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg);
+
+ return 0;
+}
+
+/**
+ * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
+ * @dwc: Pointer to our controller context structure
+ *
+ * Returns 0 on success. The USB PHY interfaces are configured but not
+ * initialized. The PHY interfaces and the PHYs get initialized together with
+ * the core in dwc3_core_init.
+ */
+static int dwc3_phy_setup(struct dwc3 *dwc)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < dwc->num_usb3_ports; i++) {
+ ret = dwc3_ss_phy_setup(dwc, i);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ ret = dwc3_hs_phy_setup(dwc, i);
+ if (ret)
+ return ret;
+ }
return 0;
}
@@ -748,23 +781,32 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
static int dwc3_phy_init(struct dwc3 *dwc)
{
int ret;
+ int i;
+ int j;
usb_phy_init(dwc->usb2_phy);
usb_phy_init(dwc->usb3_phy);
- ret = phy_init(dwc->usb2_generic_phy);
- if (ret < 0)
- goto err_shutdown_usb3_phy;
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ ret = phy_init(dwc->usb2_generic_phy[i]);
+ if (ret < 0)
+ goto err_exit_phy;
- ret = phy_init(dwc->usb3_generic_phy);
- if (ret < 0)
- goto err_exit_usb2_phy;
+ ret = phy_init(dwc->usb3_generic_phy[i]);
+ if (ret < 0) {
+ phy_exit(dwc->usb2_generic_phy[i]);
+ goto err_exit_phy;
+ }
+ }
return 0;
-err_exit_usb2_phy:
- phy_exit(dwc->usb2_generic_phy);
-err_shutdown_usb3_phy:
+err_exit_phy:
+ for (j = i - 1; j >= 0; j--) {
+ phy_exit(dwc->usb3_generic_phy[j]);
+ phy_exit(dwc->usb2_generic_phy[j]);
+ }
+
usb_phy_shutdown(dwc->usb3_phy);
usb_phy_shutdown(dwc->usb2_phy);
@@ -773,8 +815,12 @@ static int dwc3_phy_init(struct dwc3 *dwc)
static void dwc3_phy_exit(struct dwc3 *dwc)
{
- phy_exit(dwc->usb3_generic_phy);
- phy_exit(dwc->usb2_generic_phy);
+ int i;
+
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ phy_exit(dwc->usb3_generic_phy[i]);
+ phy_exit(dwc->usb2_generic_phy[i]);
+ }
usb_phy_shutdown(dwc->usb3_phy);
usb_phy_shutdown(dwc->usb2_phy);
@@ -783,23 +829,32 @@ static void dwc3_phy_exit(struct dwc3 *dwc)
static int dwc3_phy_power_on(struct dwc3 *dwc)
{
int ret;
+ int i;
+ int j;
usb_phy_set_suspend(dwc->usb2_phy, 0);
usb_phy_set_suspend(dwc->usb3_phy, 0);
- ret = phy_power_on(dwc->usb2_generic_phy);
- if (ret < 0)
- goto err_suspend_usb3_phy;
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ ret = phy_power_on(dwc->usb2_generic_phy[i]);
+ if (ret < 0)
+ goto err_power_off_phy;
- ret = phy_power_on(dwc->usb3_generic_phy);
- if (ret < 0)
- goto err_power_off_usb2_phy;
+ ret = phy_power_on(dwc->usb3_generic_phy[i]);
+ if (ret < 0) {
+ phy_power_off(dwc->usb2_generic_phy[i]);
+ goto err_power_off_phy;
+ }
+ }
return 0;
-err_power_off_usb2_phy:
- phy_power_off(dwc->usb2_generic_phy);
-err_suspend_usb3_phy:
+err_power_off_phy:
+ for (j = i - 1; j >= 0; j--) {
+ phy_power_off(dwc->usb3_generic_phy[j]);
+ phy_power_off(dwc->usb2_generic_phy[j]);
+ }
+
usb_phy_set_suspend(dwc->usb3_phy, 1);
usb_phy_set_suspend(dwc->usb2_phy, 1);
@@ -808,8 +863,12 @@ static int dwc3_phy_power_on(struct dwc3 *dwc)
static void dwc3_phy_power_off(struct dwc3 *dwc)
{
- phy_power_off(dwc->usb3_generic_phy);
- phy_power_off(dwc->usb2_generic_phy);
+ int i;
+
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ phy_power_off(dwc->usb3_generic_phy[i]);
+ phy_power_off(dwc->usb2_generic_phy[i]);
+ }
usb_phy_set_suspend(dwc->usb3_phy, 1);
usb_phy_set_suspend(dwc->usb2_phy, 1);
@@ -1201,6 +1260,7 @@ static int dwc3_core_init(struct dwc3 *dwc)
unsigned int hw_mode;
u32 reg;
int ret;
+ int i;
hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
@@ -1244,15 +1304,19 @@ static int dwc3_core_init(struct dwc3 *dwc)
if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD &&
!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) {
if (!dwc->dis_u3_susphy_quirk) {
- reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
- reg |= DWC3_GUSB3PIPECTL_SUSPHY;
- dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+ for (i = 0; i < dwc->num_usb3_ports; i++) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(i));
+ reg |= DWC3_GUSB3PIPECTL_SUSPHY;
+ dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(i), reg);
+ }
}
if (!dwc->dis_u2_susphy_quirk) {
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- reg |= DWC3_GUSB2PHYCFG_SUSPHY;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
+ reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
+ }
}
}
@@ -1372,7 +1436,9 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
{
struct device *dev = dwc->dev;
struct device_node *node = dev->of_node;
+ char phy_name[9];
int ret;
+ int i;
if (node) {
dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
@@ -1398,22 +1464,36 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
return dev_err_probe(dev, ret, "no usb3 phy configured\n");
}
- dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
- if (IS_ERR(dwc->usb2_generic_phy)) {
- ret = PTR_ERR(dwc->usb2_generic_phy);
- if (ret == -ENOSYS || ret == -ENODEV)
- dwc->usb2_generic_phy = NULL;
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ if (dwc->num_usb2_ports == 1)
+ sprintf(phy_name, "usb2-phy");
else
- return dev_err_probe(dev, ret, "no usb2 phy configured\n");
- }
+ sprintf(phy_name, "usb2-%d", i);
+
+ dwc->usb2_generic_phy[i] = devm_phy_get(dev, phy_name);
+ if (IS_ERR(dwc->usb2_generic_phy[i])) {
+ ret = PTR_ERR(dwc->usb2_generic_phy[i]);
+ if (ret == -ENOSYS || ret == -ENODEV)
+ dwc->usb2_generic_phy[i] = NULL;
+ else
+ return dev_err_probe(dev, ret, "failed to lookup phy %s\n",
+ phy_name);
+ }
- dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
- if (IS_ERR(dwc->usb3_generic_phy)) {
- ret = PTR_ERR(dwc->usb3_generic_phy);
- if (ret == -ENOSYS || ret == -ENODEV)
- dwc->usb3_generic_phy = NULL;
+ if (dwc->num_usb2_ports == 1)
+ sprintf(phy_name, "usb3-phy");
else
- return dev_err_probe(dev, ret, "no usb3 phy configured\n");
+ sprintf(phy_name, "usb3-%d", i);
+
+ dwc->usb3_generic_phy[i] = devm_phy_get(dev, phy_name);
+ if (IS_ERR(dwc->usb3_generic_phy[i])) {
+ ret = PTR_ERR(dwc->usb3_generic_phy[i]);
+ if (ret == -ENOSYS || ret == -ENODEV)
+ dwc->usb3_generic_phy[i] = NULL;
+ else
+ return dev_err_probe(dev, ret, "failed to lookup phy %s\n",
+ phy_name);
+ }
}
return 0;
@@ -1423,6 +1503,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
{
struct device *dev = dwc->dev;
int ret;
+ int i;
switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
@@ -1430,8 +1511,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, false);
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
- phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE);
ret = dwc3_gadget_init(dwc);
if (ret)
@@ -1442,8 +1523,10 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, true);
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
- phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
+ phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
+ }
ret = dwc3_host_init(dwc);
if (ret)
@@ -1937,6 +2020,10 @@ static int dwc3_get_num_ports(struct dwc3 *dwc)
iounmap(base);
+ if (dwc->num_usb2_ports > DWC3_MAX_PORTS ||
+ dwc->num_usb3_ports > DWC3_MAX_PORTS)
+ return -ENOMEM;
+
return 0;
}
@@ -2174,6 +2261,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
{
unsigned long flags;
u32 reg;
+ int i;
switch (dwc->current_dr_role) {
case DWC3_GCTL_PRTCAP_DEVICE:
@@ -2192,17 +2280,21 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
/* Let controller to suspend HSPHY before PHY driver suspends */
if (dwc->dis_u2_susphy_quirk ||
dwc->dis_enblslpm_quirk) {
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- reg |= DWC3_GUSB2PHYCFG_ENBLSLPM |
- DWC3_GUSB2PHYCFG_SUSPHY;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
+ reg |= DWC3_GUSB2PHYCFG_ENBLSLPM |
+ DWC3_GUSB2PHYCFG_SUSPHY;
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
+ }
/* Give some time for USB2 PHY to suspend */
usleep_range(5000, 6000);
}
- phy_pm_runtime_put_sync(dwc->usb2_generic_phy);
- phy_pm_runtime_put_sync(dwc->usb3_generic_phy);
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ phy_pm_runtime_put_sync(dwc->usb2_generic_phy[i]);
+ phy_pm_runtime_put_sync(dwc->usb3_generic_phy[i]);
+ }
break;
case DWC3_GCTL_PRTCAP_OTG:
/* do nothing during runtime_suspend */
@@ -2232,6 +2324,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
unsigned long flags;
int ret;
u32 reg;
+ int i;
switch (dwc->current_dr_role) {
case DWC3_GCTL_PRTCAP_DEVICE:
@@ -2251,17 +2344,21 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
break;
}
/* Restore GUSB2PHYCFG bits that were modified in suspend */
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- if (dwc->dis_u2_susphy_quirk)
- reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
+ if (dwc->dis_u2_susphy_quirk)
+ reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
- if (dwc->dis_enblslpm_quirk)
- reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
+ if (dwc->dis_enblslpm_quirk)
+ reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
+ }
- phy_pm_runtime_get_sync(dwc->usb2_generic_phy);
- phy_pm_runtime_get_sync(dwc->usb3_generic_phy);
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ phy_pm_runtime_get_sync(dwc->usb2_generic_phy[i]);
+ phy_pm_runtime_get_sync(dwc->usb3_generic_phy[i]);
+ }
break;
case DWC3_GCTL_PRTCAP_OTG:
/* nothing to do on runtime_resume */
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 341e4c73cb2e..df2e111aa848 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -33,6 +33,12 @@
#include <linux/power_supply.h>
+/*
+ * Maximum number of ports currently supported for multiport
+ * controllers.
+ */
+#define DWC3_MAX_PORTS 4
+
#define DWC3_MSG_MAX 500
/* Global constants */
@@ -1037,8 +1043,8 @@ struct dwc3_scratchpad_array {
* @usb_psy: pointer to power supply interface.
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
- * @usb2_generic_phy: pointer to USB2 PHY
- * @usb3_generic_phy: pointer to USB3 PHY
+ * @usb2_generic_phy: pointer to array of USB2 PHYs
+ * @usb3_generic_phy: pointer to array of USB3 PHYs
* @num_usb2_ports: number of USB2 ports
* @num_usb3_ports: number of USB3 ports
* @phys_ready: flag to indicate that PHYs are ready
@@ -1186,8 +1192,8 @@ struct dwc3 {
struct usb_phy *usb2_phy;
struct usb_phy *usb3_phy;
- struct phy *usb2_generic_phy;
- struct phy *usb3_generic_phy;
+ struct phy *usb2_generic_phy[DWC3_MAX_PORTS];
+ struct phy *usb3_generic_phy[DWC3_MAX_PORTS];
u8 num_usb2_ports;
u8 num_usb3_ports;
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 57ddd2e43022..d76ae676783c 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -331,6 +331,7 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
u32 reg;
int id;
unsigned long flags;
+ int i;
if (dwc->dr_mode != USB_DR_MODE_OTG)
return;
@@ -386,9 +387,12 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
} else {
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, true);
- if (dwc->usb2_generic_phy)
- phy_set_mode(dwc->usb2_generic_phy,
- PHY_MODE_USB_HOST);
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ if (dwc->usb2_generic_phy[i]) {
+ phy_set_mode(dwc->usb2_generic_phy[i],
+ PHY_MODE_USB_HOST);
+ }
+ }
}
break;
case DWC3_OTG_ROLE_DEVICE:
@@ -400,9 +404,8 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, false);
- if (dwc->usb2_generic_phy)
- phy_set_mode(dwc->usb2_generic_phy,
- PHY_MODE_USB_DEVICE);
+ if (dwc->usb2_generic_phy[0])
+ phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
ret = dwc3_gadget_init(dwc);
if (ret)
dev_err(dwc->dev, "failed to initialize peripheral\n");
--
2.34.1
^ permalink raw reply related
* [PATCH v19 5/9] dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport
From: Krishna Kurapati @ 2024-04-04 5:12 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Bjorn Andersson, Wesley Cheng,
Konrad Dybcio, Greg Kroah-Hartman, Conor Dooley, Thinh Nguyen,
Felipe Balbi, Johan Hovold
Cc: devicetree, linux-arm-msm, linux-usb, linux-kernel, quic_ppratap,
quic_jackp, Krishna Kurapati, Johan Hovold
In-Reply-To: <20240404051229.3082902-1-quic_kriskura@quicinc.com>
Add the compatible string for SC8280 Multiport USB controller from
Qualcomm.
There are 4 power event irq interrupts supported by this controller
(one for each port of multiport). Added all the 4 as non-optional
interrupts for SC8280XP-MP
Also each port of multiport has one DP and oen DM IRQ. Add all DP/DM
IRQ's related to 4 ports of SC8280XP Teritiary controller.
Also added ss phy irq for both SS Ports.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
---
.../devicetree/bindings/usb/qcom,dwc3.yaml | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 38a3404ec71b..f55f601c0329 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -30,6 +30,7 @@ properties:
- qcom,sc7180-dwc3
- qcom,sc7280-dwc3
- qcom,sc8280xp-dwc3
+ - qcom,sc8280xp-dwc3-mp
- qcom,sdm660-dwc3
- qcom,sdm670-dwc3
- qcom,sdm845-dwc3
@@ -282,6 +283,7 @@ allOf:
contains:
enum:
- qcom,sc8280xp-dwc3
+ - qcom,sc8280xp-dwc3-mp
- qcom,x1e80100-dwc3
then:
properties:
@@ -470,6 +472,38 @@ allOf:
- const: dm_hs_phy_irq
- const: ss_phy_irq
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc8280xp-dwc3-mp
+ then:
+ properties:
+ interrupts:
+ minItems: 18
+ maxItems: 18
+ interrupt-names:
+ items:
+ - const: pwr_event_1
+ - const: pwr_event_2
+ - const: pwr_event_3
+ - const: pwr_event_4
+ - const: hs_phy_1
+ - const: hs_phy_2
+ - const: hs_phy_3
+ - const: hs_phy_4
+ - const: dp_hs_phy_1
+ - const: dm_hs_phy_1
+ - const: dp_hs_phy_2
+ - const: dm_hs_phy_2
+ - const: dp_hs_phy_3
+ - const: dm_hs_phy_3
+ - const: dp_hs_phy_4
+ - const: dm_hs_phy_4
+ - const: ss_phy_1
+ - const: ss_phy_2
+
additionalProperties: false
examples:
--
2.34.1
^ permalink raw reply related
* [PATCH v19 6/9] usb: dwc3: qcom: Add helper function to request wakeup interrupts
From: Krishna Kurapati @ 2024-04-04 5:12 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Bjorn Andersson, Wesley Cheng,
Konrad Dybcio, Greg Kroah-Hartman, Conor Dooley, Thinh Nguyen,
Felipe Balbi, Johan Hovold
Cc: devicetree, linux-arm-msm, linux-usb, linux-kernel, quic_ppratap,
quic_jackp, Krishna Kurapati, Johan Hovold
In-Reply-To: <20240404051229.3082902-1-quic_kriskura@quicinc.com>
The logic for requesting interrupts is duplicated for each interrupt. In
the upcoming patches that introduces support for multiport, it would be
better to clean up the duplication before reading mulitport related
interrupts.
Refactor interrupt setup call by adding a new helper function for
requesting the wakeup interrupts. To simplify implementation, make
the display name same as the interrupt name expected in DT.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/usb/dwc3/dwc3-qcom.c | 53 ++++++++++++++++--------------------
1 file changed, 24 insertions(+), 29 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index f6b2fab49d5e..cae5dab8fcfc 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -501,6 +501,22 @@ static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom)
PIPE_UTMI_CLK_DIS);
}
+static int dwc3_qcom_request_irq(struct dwc3_qcom *qcom, int irq,
+ const char *name)
+{
+ int ret;
+
+ /* Keep wakeup interrupts disabled until suspend */
+ ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
+ qcom_dwc3_resume_irq,
+ IRQF_ONESHOT | IRQF_NO_AUTOEN,
+ name, qcom);
+ if (ret)
+ dev_err(qcom->dev, "failed to request irq %s: %d\n", name, ret);
+
+ return ret;
+}
+
static int dwc3_qcom_setup_irq(struct platform_device *pdev)
{
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
@@ -509,54 +525,33 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
if (irq > 0) {
- /* Keep wakeup interrupts disabled until suspend */
- ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
- qcom_dwc3_resume_irq,
- IRQF_ONESHOT | IRQF_NO_AUTOEN,
- "qcom_dwc3 QUSB2", qcom);
- if (ret) {
- dev_err(qcom->dev, "qusb2_phy_irq failed: %d\n", ret);
+ ret = dwc3_qcom_request_irq(qcom, irq, "qusb2_phy");
+ if (ret)
return ret;
- }
qcom->qusb2_phy_irq = irq;
}
irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_irq");
if (irq > 0) {
- ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
- qcom_dwc3_resume_irq,
- IRQF_ONESHOT | IRQF_NO_AUTOEN,
- "qcom_dwc3 DP_HS", qcom);
- if (ret) {
- dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
+ ret = dwc3_qcom_request_irq(qcom, irq, "dp_hs_phy_irq");
+ if (ret)
return ret;
- }
qcom->dp_hs_phy_irq = irq;
}
irq = platform_get_irq_byname_optional(pdev, "dm_hs_phy_irq");
if (irq > 0) {
- ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
- qcom_dwc3_resume_irq,
- IRQF_ONESHOT | IRQF_NO_AUTOEN,
- "qcom_dwc3 DM_HS", qcom);
- if (ret) {
- dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
+ ret = dwc3_qcom_request_irq(qcom, irq, "dm_hs_phy_irq");
+ if (ret)
return ret;
- }
qcom->dm_hs_phy_irq = irq;
}
irq = platform_get_irq_byname_optional(pdev, "ss_phy_irq");
if (irq > 0) {
- ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
- qcom_dwc3_resume_irq,
- IRQF_ONESHOT | IRQF_NO_AUTOEN,
- "qcom_dwc3 SS", qcom);
- if (ret) {
- dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret);
+ ret = dwc3_qcom_request_irq(qcom, irq, "ss_phy_irq");
+ if (ret)
return ret;
- }
qcom->ss_phy_irq = irq;
}
--
2.34.1
^ permalink raw reply related
* [PATCH v19 7/9] usb: dwc3: qcom: Refactor IRQ handling in glue driver
From: Krishna Kurapati @ 2024-04-04 5:12 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Bjorn Andersson, Wesley Cheng,
Konrad Dybcio, Greg Kroah-Hartman, Conor Dooley, Thinh Nguyen,
Felipe Balbi, Johan Hovold
Cc: devicetree, linux-arm-msm, linux-usb, linux-kernel, quic_ppratap,
quic_jackp, Krishna Kurapati, Johan Hovold
In-Reply-To: <20240404051229.3082902-1-quic_kriskura@quicinc.com>
On multiport supported controllers, each port has its own DP/DM
and SS (if super speed capable) interrupts. As per the bindings,
their interrupt names differ from standard ones having "_x" added
as suffix (x indicates port number). Identify from the interrupt
names whether the controller is a multiport controller or not.
Refactor dwc3_qcom_setup_irq() call to parse multiport interrupts
along with non-multiport ones accordingly..
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/usb/dwc3/dwc3-qcom.c | 137 ++++++++++++++++++++++++++---------
1 file changed, 103 insertions(+), 34 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index cae5dab8fcfc..35eb338514bc 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -52,6 +52,13 @@
#define APPS_USB_AVG_BW 0
#define APPS_USB_PEAK_BW MBps_to_icc(40)
+struct dwc3_qcom_port {
+ int qusb2_phy_irq;
+ int dp_hs_phy_irq;
+ int dm_hs_phy_irq;
+ int ss_phy_irq;
+};
+
struct dwc3_qcom {
struct device *dev;
void __iomem *qscratch_base;
@@ -59,11 +66,8 @@ struct dwc3_qcom {
struct clk **clks;
int num_clocks;
struct reset_control *resets;
-
- int qusb2_phy_irq;
- int dp_hs_phy_irq;
- int dm_hs_phy_irq;
- int ss_phy_irq;
+ struct dwc3_qcom_port ports[DWC3_MAX_PORTS];
+ u8 num_ports;
enum usb_device_speed usb2_speed;
struct extcon_dev *edev;
@@ -354,24 +358,24 @@ static void dwc3_qcom_disable_wakeup_irq(int irq)
static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
{
- dwc3_qcom_disable_wakeup_irq(qcom->qusb2_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(qcom->ports[0].qusb2_phy_irq);
if (qcom->usb2_speed == USB_SPEED_LOW) {
- dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq);
} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
(qcom->usb2_speed == USB_SPEED_FULL)) {
- dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq);
} else {
- dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
- dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq);
}
- dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(qcom->ports[0].ss_phy_irq);
}
static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
{
- dwc3_qcom_enable_wakeup_irq(qcom->qusb2_phy_irq, 0);
+ dwc3_qcom_enable_wakeup_irq(qcom->ports[0].qusb2_phy_irq, 0);
/*
* Configure DP/DM line interrupts based on the USB2 device attached to
@@ -383,20 +387,20 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
*/
if (qcom->usb2_speed == USB_SPEED_LOW) {
- dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq,
- IRQ_TYPE_EDGE_FALLING);
+ dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq,
+ IRQ_TYPE_EDGE_FALLING);
} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
(qcom->usb2_speed == USB_SPEED_FULL)) {
- dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq,
- IRQ_TYPE_EDGE_FALLING);
+ dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq,
+ IRQ_TYPE_EDGE_FALLING);
} else {
- dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq,
- IRQ_TYPE_EDGE_RISING);
- dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq,
- IRQ_TYPE_EDGE_RISING);
+ dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq,
+ IRQ_TYPE_EDGE_RISING);
+ dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq,
+ IRQ_TYPE_EDGE_RISING);
}
- dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq, 0);
+ dwc3_qcom_enable_wakeup_irq(qcom->ports[0].ss_phy_irq, 0);
}
static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
@@ -517,42 +521,107 @@ static int dwc3_qcom_request_irq(struct dwc3_qcom *qcom, int irq,
return ret;
}
-static int dwc3_qcom_setup_irq(struct platform_device *pdev)
+static int dwc3_qcom_setup_port_irq(struct platform_device *pdev, int port_index, bool is_multiport)
{
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
+ const char *irq_name;
int irq;
int ret;
- irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
+ if (is_multiport)
+ irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dp_hs_phy_%d", port_index + 1);
+ else
+ irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dp_hs_phy_irq");
+ if (!irq_name)
+ return -ENOMEM;
+
+ irq = platform_get_irq_byname_optional(pdev, irq_name);
if (irq > 0) {
- ret = dwc3_qcom_request_irq(qcom, irq, "qusb2_phy");
+ ret = dwc3_qcom_request_irq(qcom, irq, irq_name);
if (ret)
return ret;
- qcom->qusb2_phy_irq = irq;
+ qcom->ports[port_index].dp_hs_phy_irq = irq;
}
- irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_irq");
+ if (is_multiport)
+ irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dm_hs_phy_%d", port_index + 1);
+ else
+ irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dm_hs_phy_irq");
+ if (!irq_name)
+ return -ENOMEM;
+
+ irq = platform_get_irq_byname_optional(pdev, irq_name);
if (irq > 0) {
- ret = dwc3_qcom_request_irq(qcom, irq, "dp_hs_phy_irq");
+ ret = dwc3_qcom_request_irq(qcom, irq, irq_name);
if (ret)
return ret;
- qcom->dp_hs_phy_irq = irq;
+ qcom->ports[port_index].dm_hs_phy_irq = irq;
}
- irq = platform_get_irq_byname_optional(pdev, "dm_hs_phy_irq");
+ if (is_multiport)
+ irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "ss_phy_%d", port_index + 1);
+ else
+ irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "ss_phy_irq");
+ if (!irq_name)
+ return -ENOMEM;
+
+ irq = platform_get_irq_byname_optional(pdev, irq_name);
if (irq > 0) {
- ret = dwc3_qcom_request_irq(qcom, irq, "dm_hs_phy_irq");
+ ret = dwc3_qcom_request_irq(qcom, irq, irq_name);
if (ret)
return ret;
- qcom->dm_hs_phy_irq = irq;
+ qcom->ports[port_index].ss_phy_irq = irq;
}
- irq = platform_get_irq_byname_optional(pdev, "ss_phy_irq");
+ if (is_multiport)
+ return 0;
+
+ irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
if (irq > 0) {
- ret = dwc3_qcom_request_irq(qcom, irq, "ss_phy_irq");
+ ret = dwc3_qcom_request_irq(qcom, irq, "qusb2_phy");
+ if (ret)
+ return ret;
+ qcom->ports[port_index].qusb2_phy_irq = irq;
+ }
+
+ return 0;
+}
+
+static int dwc3_qcom_find_num_ports(struct platform_device *pdev)
+{
+ char irq_name[14];
+ int port_num;
+ int irq;
+
+ irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_1");
+ if (irq <= 0)
+ return 1;
+
+ for (port_num = 2; port_num <= DWC3_MAX_PORTS; port_num++) {
+ sprintf(irq_name, "dp_hs_phy_%d", port_num);
+
+ irq = platform_get_irq_byname_optional(pdev, irq_name);
+ if (irq <= 0)
+ return port_num - 1;
+ }
+
+ return DWC3_MAX_PORTS;
+}
+
+static int dwc3_qcom_setup_irq(struct platform_device *pdev)
+{
+ struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
+ bool is_multiport;
+ int ret;
+ int i;
+
+ qcom->num_ports = dwc3_qcom_find_num_ports(pdev);
+ is_multiport = (qcom->num_ports > 1);
+
+ for (i = 0; i < qcom->num_ports; i++) {
+ ret = dwc3_qcom_setup_port_irq(pdev, i, is_multiport);
if (ret)
return ret;
- qcom->ss_phy_irq = irq;
}
return 0;
--
2.34.1
^ permalink raw reply related
* [PATCH v19 8/9] usb: dwc3: qcom: Enable wakeup for applicable ports of multiport
From: Krishna Kurapati @ 2024-04-04 5:12 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Bjorn Andersson, Wesley Cheng,
Konrad Dybcio, Greg Kroah-Hartman, Conor Dooley, Thinh Nguyen,
Felipe Balbi, Johan Hovold
Cc: devicetree, linux-arm-msm, linux-usb, linux-kernel, quic_ppratap,
quic_jackp, Krishna Kurapati, Johan Hovold
In-Reply-To: <20240404051229.3082902-1-quic_kriskura@quicinc.com>
DWC3 Qcom wrapper currently supports only wakeup configuration
for single port controllers. Read speed of each port connected
to the controller and enable wakeup for each of them accordingly.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/usb/dwc3/dwc3-qcom.c | 71 +++++++++++++++++++++---------------
1 file changed, 41 insertions(+), 30 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 35eb338514bc..12182e0f8f45 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -57,6 +57,7 @@ struct dwc3_qcom_port {
int dp_hs_phy_irq;
int dm_hs_phy_irq;
int ss_phy_irq;
+ enum usb_device_speed usb2_speed;
};
struct dwc3_qcom {
@@ -68,7 +69,6 @@ struct dwc3_qcom {
struct reset_control *resets;
struct dwc3_qcom_port ports[DWC3_MAX_PORTS];
u8 num_ports;
- enum usb_device_speed usb2_speed;
struct extcon_dev *edev;
struct extcon_dev *host_edev;
@@ -307,7 +307,7 @@ static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom)
return dwc->xhci;
}
-static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom)
+static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom, int port_index)
{
struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
struct usb_device *udev;
@@ -318,14 +318,8 @@ static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom)
*/
hcd = platform_get_drvdata(dwc->xhci);
- /*
- * It is possible to query the speed of all children of
- * USB2.0 root hub via usb_hub_for_each_child(). DWC3 code
- * currently supports only 1 port per controller. So
- * this is sufficient.
- */
#ifdef CONFIG_USB
- udev = usb_hub_find_child(hcd->self.root_hub, 1);
+ udev = usb_hub_find_child(hcd->self.root_hub, port_index + 1);
#else
udev = NULL;
#endif
@@ -356,26 +350,26 @@ static void dwc3_qcom_disable_wakeup_irq(int irq)
disable_irq_nosync(irq);
}
-static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
+static void dwc3_qcom_disable_port_interrupts(struct dwc3_qcom_port *port)
{
- dwc3_qcom_disable_wakeup_irq(qcom->ports[0].qusb2_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(port->qusb2_phy_irq);
- if (qcom->usb2_speed == USB_SPEED_LOW) {
- dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq);
- } else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
- (qcom->usb2_speed == USB_SPEED_FULL)) {
- dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq);
+ if (port->usb2_speed == USB_SPEED_LOW) {
+ dwc3_qcom_disable_wakeup_irq(port->dm_hs_phy_irq);
+ } else if ((port->usb2_speed == USB_SPEED_HIGH) ||
+ (port->usb2_speed == USB_SPEED_FULL)) {
+ dwc3_qcom_disable_wakeup_irq(port->dp_hs_phy_irq);
} else {
- dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq);
- dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(port->dp_hs_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(port->dm_hs_phy_irq);
}
- dwc3_qcom_disable_wakeup_irq(qcom->ports[0].ss_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(port->ss_phy_irq);
}
-static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
+static void dwc3_qcom_enable_port_interrupts(struct dwc3_qcom_port *port)
{
- dwc3_qcom_enable_wakeup_irq(qcom->ports[0].qusb2_phy_irq, 0);
+ dwc3_qcom_enable_wakeup_irq(port->qusb2_phy_irq, 0);
/*
* Configure DP/DM line interrupts based on the USB2 device attached to
@@ -386,21 +380,37 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
* DP and DM lines as rising edge to detect HS/HS/LS device connect scenario.
*/
- if (qcom->usb2_speed == USB_SPEED_LOW) {
- dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq,
+ if (port->usb2_speed == USB_SPEED_LOW) {
+ dwc3_qcom_enable_wakeup_irq(port->dm_hs_phy_irq,
IRQ_TYPE_EDGE_FALLING);
- } else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
- (qcom->usb2_speed == USB_SPEED_FULL)) {
- dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq,
+ } else if ((port->usb2_speed == USB_SPEED_HIGH) ||
+ (port->usb2_speed == USB_SPEED_FULL)) {
+ dwc3_qcom_enable_wakeup_irq(port->dp_hs_phy_irq,
IRQ_TYPE_EDGE_FALLING);
} else {
- dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq,
+ dwc3_qcom_enable_wakeup_irq(port->dp_hs_phy_irq,
IRQ_TYPE_EDGE_RISING);
- dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq,
+ dwc3_qcom_enable_wakeup_irq(port->dm_hs_phy_irq,
IRQ_TYPE_EDGE_RISING);
}
- dwc3_qcom_enable_wakeup_irq(qcom->ports[0].ss_phy_irq, 0);
+ dwc3_qcom_enable_wakeup_irq(port->ss_phy_irq, 0);
+}
+
+static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
+{
+ int i;
+
+ for (i = 0; i < qcom->num_ports; i++)
+ dwc3_qcom_disable_port_interrupts(&qcom->ports[i]);
+}
+
+static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
+{
+ int i;
+
+ for (i = 0; i < qcom->num_ports; i++)
+ dwc3_qcom_enable_port_interrupts(&qcom->ports[i]);
}
static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
@@ -427,7 +437,8 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
* freezable workqueue.
*/
if (dwc3_qcom_is_host(qcom) && wakeup) {
- qcom->usb2_speed = dwc3_qcom_read_usb2_speed(qcom);
+ for (i = 0; i < qcom->num_ports; i++)
+ qcom->ports[i].usb2_speed = dwc3_qcom_read_usb2_speed(qcom, i);
dwc3_qcom_enable_interrupts(qcom);
}
--
2.34.1
^ permalink raw reply related
* [PATCH v19 9/9] usb: dwc3: qcom: Add multiport suspend/resume support for wrapper
From: Krishna Kurapati @ 2024-04-04 5:12 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Bjorn Andersson, Wesley Cheng,
Konrad Dybcio, Greg Kroah-Hartman, Conor Dooley, Thinh Nguyen,
Felipe Balbi, Johan Hovold
Cc: devicetree, linux-arm-msm, linux-usb, linux-kernel, quic_ppratap,
quic_jackp, Krishna Kurapati, Johan Hovold
In-Reply-To: <20240404051229.3082902-1-quic_kriskura@quicinc.com>
Power event IRQ is used for wakeup in cases:
a) where the controller is super speed capable and missing an
ss_phy interrupt.
b) where the GIC is not capable of detecting DP/DM hs phy irq's.
Power event IRQ stat register indicates whether high speed phy
entered and exited L2 successfully during suspend and resume.
Indicate the same for all ports of multiport.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/usb/dwc3/dwc3-qcom.c | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 12182e0f8f45..d3e6d5d5e8bf 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -52,6 +52,13 @@
#define APPS_USB_AVG_BW 0
#define APPS_USB_PEAK_BW MBps_to_icc(40)
+static const u32 pwr_evnt_irq_stat_reg[DWC3_MAX_PORTS] = {
+ 0x58,
+ 0x1dc,
+ 0x228,
+ 0x238,
+};
+
struct dwc3_qcom_port {
int qusb2_phy_irq;
int dp_hs_phy_irq;
@@ -421,9 +428,11 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
if (qcom->is_suspended)
return 0;
- val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
- if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
- dev_err(qcom->dev, "HS-PHY not in L2\n");
+ for (i = 0; i < qcom->num_ports; i++) {
+ val = readl(qcom->qscratch_base + pwr_evnt_irq_stat_reg[i]);
+ if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
+ dev_err(qcom->dev, "port-%d HS-PHY not in L2\n", i + 1);
+ }
for (i = qcom->num_clocks - 1; i >= 0; i--)
clk_disable_unprepare(qcom->clks[i]);
@@ -472,8 +481,11 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup)
dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
/* Clear existing events from PHY related to L2 in/out */
- dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
- PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
+ for (i = 0; i < qcom->num_ports; i++) {
+ dwc3_qcom_setbits(qcom->qscratch_base,
+ pwr_evnt_irq_stat_reg[i],
+ PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
+ }
qcom->is_suspended = false;
--
2.34.1
^ permalink raw reply related
* Re: [PATCH V2 RESEND 6/6] arm64: dts: qcom: sm8650: Add video and camera clock controllers
From: Jagadeesh Kona @ 2024-04-04 5:13 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Bjorn Andersson, Konrad Dybcio, Michael Turquette, Stephen Boyd,
Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Vladimir Zapolskiy, linux-arm-msm, linux-clk, devicetree,
linux-kernel, Taniya Das, Satya Priya Kakitapalli, Ajit Pandey,
Imran Shaik
In-Reply-To: <CAA8EJpqDwCVAjDphnC-HdfseMJ-xd8VVxb5+9UcGEcKLcn-heg@mail.gmail.com>
On 4/3/2024 9:24 PM, Dmitry Baryshkov wrote:
> On Wed, 3 Apr 2024 at 10:16, Jagadeesh Kona <quic_jkona@quicinc.com> wrote:
>>
>>
>>
>> On 3/25/2024 11:38 AM, Jagadeesh Kona wrote:
>>>
>>>
>>> On 3/21/2024 6:43 PM, Dmitry Baryshkov wrote:
>>>> On Thu, 21 Mar 2024 at 11:27, Jagadeesh Kona <quic_jkona@quicinc.com>
>>>> wrote:
>>>>>
>>>>> Add device nodes for video and camera clock controllers on Qualcomm
>>>>> SM8650 platform.
>>>>>
>>>>> Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
>>>>> ---
>>>>> arch/arm64/boot/dts/qcom/sm8650.dtsi | 28 ++++++++++++++++++++++++++++
>>>>> 1 file changed, 28 insertions(+)
>>>>>
>>>>> diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi
>>>>> b/arch/arm64/boot/dts/qcom/sm8650.dtsi
>>>>> index 32c0a7b9aded..d862aa6be824 100644
>>>>> --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
>>>>> +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
>>>>> @@ -4,6 +4,8 @@
>>>>> */
>>>>>
>>>>> #include <dt-bindings/clock/qcom,rpmh.h>
>>>>> +#include <dt-bindings/clock/qcom,sm8450-videocc.h>
>>>>> +#include <dt-bindings/clock/qcom,sm8650-camcc.h>
>>>>> #include <dt-bindings/clock/qcom,sm8650-dispcc.h>
>>>>> #include <dt-bindings/clock/qcom,sm8650-gcc.h>
>>>>> #include <dt-bindings/clock/qcom,sm8650-gpucc.h>
>>>>> @@ -3110,6 +3112,32 @@ opp-202000000 {
>>>>> };
>>>>> };
>>>>>
>>>>> + videocc: clock-controller@aaf0000 {
>>>>> + compatible = "qcom,sm8650-videocc";
>>>>> + reg = <0 0x0aaf0000 0 0x10000>;
>>>>> + clocks = <&bi_tcxo_div2>,
>>>>> + <&gcc GCC_VIDEO_AHB_CLK>;
>>>>> + power-domains = <&rpmhpd RPMHPD_MMCX>;
>>>>> + required-opps = <&rpmhpd_opp_low_svs>;
>>>>
>>>> The required-opps should no longer be necessary.
>>>>
>>>
>>> Sure, will check and remove this if not required.
>>
>>
>> I checked further on this and without required-opps, if there is no vote
>> on the power-domain & its peer from any other consumers, when runtime
>> get is called on device, it enables the power domain just at the minimum
>> non-zero level. But in some cases, the minimum non-zero level of
>> power-domain could be just retention and is not sufficient for clock
>> controller to operate, hence required-opps property is needed to specify
>> the minimum level required on power-domain for this clock controller.
>
> In which cases? If it ends up with the retention vote, it is a bug
> which must be fixed.
>
The minimum non-zero level(configured from bootloaders) of MMCX is
retention on few chipsets but it can vary across the chipsets. Hence to
be on safer side from our end, it is good to have required-opps in DT to
specify the minimum level required for this clock controller.
Thanks,
Jagadeesh
>>
>> Thanks,
>> Jagadeesh
>>
>>>
>>>>> + #clock-cells = <1>;
>>>>> + #reset-cells = <1>;
>>>>> + #power-domain-cells = <1>;
>>>>> + };
>>>>> +
>>>>> + camcc: clock-controller@ade0000 {
>>>>> + compatible = "qcom,sm8650-camcc";
>>>>> + reg = <0 0x0ade0000 0 0x20000>;
>>>>> + clocks = <&gcc GCC_CAMERA_AHB_CLK>,
>>>>> + <&bi_tcxo_div2>,
>>>>> + <&bi_tcxo_ao_div2>,
>>>>> + <&sleep_clk>;
>>>>> + power-domains = <&rpmhpd RPMHPD_MMCX>;
>>>>> + required-opps = <&rpmhpd_opp_low_svs>;
>>>>> + #clock-cells = <1>;
>>>>> + #reset-cells = <1>;
>>>>> + #power-domain-cells = <1>;
>>>>> + };
>>>>> +
>>>>> mdss: display-subsystem@ae00000 {
>>>>> compatible = "qcom,sm8650-mdss";
>>>>> reg = <0 0x0ae00000 0 0x1000>;
>>>>> --
>>>>> 2.43.0
>>>>>
>>>>>
>>>>
>>>>
>
>
>
^ permalink raw reply
* [RESEND v7 00/37] Device Tree support for SH7751 based board
From: Yoshinori Sato @ 2024-04-04 5:14 UTC (permalink / raw)
To: linux-sh
Cc: Yoshinori Sato, Damien Le Moal, Niklas Cassel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
Michael Turquette, Stephen Boyd, David Airlie, Daniel Vetter,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
Thomas Gleixner, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Greg Kroah-Hartman, Jiri Slaby,
Magnus Damm, Daniel Lezcano, Rich Felker,
John Paul Adrian Glaubitz, Lee Jones, Helge Deller,
Heiko Stuebner, Shawn Guo, Sebastian Reichel, Chris Morgan,
Linus Walleij, Arnd Bergmann, David Rientjes, Hyeonggon Yoo,
Vlastimil Babka, Baoquan He, Andrew Morton, Guenter Roeck,
Kefeng Wang, Stephen Rothwell, Javier Martinez Canillas, Guo Ren,
Azeem Shaikh, Max Filippov, Jonathan Corbet, Jacky Huang,
Herve Codina, Manikanta Guntupalli, Anup Patel, Biju Das,
Uwe Kleine-König, Sam Ravnborg, Sergey Shtylyov,
Laurent Pinchart, linux-ide, devicetree, linux-kernel,
linux-renesas-soc, linux-clk, dri-devel, linux-pci, linux-serial,
linux-fbdev
Sorry. previus mail is thread broken.
This is an updated version of something I wrote about 7 years ago.
Minimum support for R2D-plus and LANDISK.
I think R2D-1 will work if you add AX88796 to dts.
And board-specific functions and SCI's SPI functions are not supported.
You can get it working with qemu found here.
https://gitlab.com/yoshinori.sato/qemu/-/tree/landisk
v7 changes.
- sh/kernel/setup.c: fix kernel parameter handling.
- clk-sh7750.c: cleanup.
- sh_tmu.c: cleanup.
- irq-renesas-sh7751.c: IPR definition move to code.
- irq-renesas-sh7751irl.c: update register definition.
- pci-sh7751.c: Register initialization fix.
- sm501 and sm501fb: Re-design Device Tree properties.
v6 changes.
- pci-sh7751: merge register define.
- pci-sh7751: use 'dma-ranges' property.
- pci-sh7751: rename general PCI properties.
- sm501 and sm501fb: Re-design Device Tree properties.
- sh/kernel/setup: cleanup command line setup.
- irq-sh7751.c: some cleanup.
v5 changes.
- pci-sh7751: revert header changes. and some fix in previuous driver.
- sh/kernel/iomap.c: Use SH io functions.
- sm501 and sm501fb: re-write DT support.
v4 changes.
- cpg-sh7750: use clk-divider and clk-gate.
- pci-sh7751: unified header files to old PCI driver.
- irq-renesas-sh7751: IPR registers direct mapping.
- irq-renesas-sh7751irl: useful register bit mapping.
- sm501 and sm501fb: re-write dt parser.
- j2_minus: fix build error.
- dt-binding schema: fix some errors.
- *.dts: cleanup.
v3 changes.
- Rewrite clk drivers.
- Added sh_tmu to OF support.
- Cleanup PCI stuff.
- Update sm501 and sm501fb OF support.
- Update devicetree and documents.
v2 changes.
- Rebasing v6,6-rc1
- re-write irqchip driver.
- Add binding documents.
- Cleanup review comment.
Yoshinori Sato (37):
sh: passing FDT address to kernel startup.
sh: Kconfig unified OF supported targets.
sh: Enable OF support for build and configuration.
dt-bindings: interrupt-controller: Add header for Renesas SH3/4 INTC.
sh: GENERIC_IRQ_CHIP support for CONFIG_OF=y
sh: kernel/setup Update DT support.
sh: Fix COMMON_CLK support in CONFIG_OF=y.
clocksource: sh_tmu: CLOCKSOURCE support.
dt-binding: Add compatible SH7750 SoC
sh: Common PCI Framework driver support.
pci: pci-sh7751: Add SH7751 PCI driver
dt-bindings: pci: pci-sh7751: Add SH7751 PCI
dt-bindings: clock: sh7750-cpg: Add renesas,sh7750-cpg header.
clk: Compatible with narrow registers
clk: renesas: Add SH7750/7751 CPG Driver
irqchip: Add SH7751 INTC driver
dt-bindings: interrupt-controller: renesas,sh7751-intc: Add
json-schema
irqchip: SH7751 external interrupt encoder with enable gate.
dt-bindings: interrupt-controller: renesas,sh7751-irl-ext: Add
json-schema
serial: sh-sci: fix SH4 OF support.
dt-bindings: serial: renesas,scif: Add scif-sh7751.
dt-bindings: display: smi,sm501: SMI SM501 binding json-schema
dt-bindings: display: sm501 register definition helper
mfd: sm501: Convert platform_data to OF property
dt-binding: sh: cpus: Add SH CPUs json-schema
dt-bindings: vendor-prefixes: Add iodata
dt-bindings: ata: ata-generic: Add new targets
dt-bindings: soc: renesas: sh: Add SH7751 based target
sh: SH7751R SoC Internal peripheral definition dtsi.
sh: add RTS7751R2D Plus DTS
sh: Add IO DATA LANDISK dts
sh: Add IO DATA USL-5P dts
sh: j2_mimas_v2.dts update
sh: Add dtbs target support.
sh: RTS7751R2D Plus OF defconfig
sh: LANDISK OF defconfig
sh: j2_defconfig: update
.../devicetree/bindings/ata/ata-generic.yaml | 2 +
.../bindings/clock/renesas,sh7750-cpg.yaml | 105 ++++
.../bindings/display/smi,sm501.yaml | 398 +++++++++++++++
.../renesas,sh7751-intc.yaml | 53 ++
.../renesas,sh7751-irl-ext.yaml | 57 +++
.../bindings/pci/renesas,sh7751-pci.yaml | 89 ++++
.../bindings/serial/renesas,scif.yaml | 1 +
.../devicetree/bindings/sh/cpus.yaml | 63 +++
.../devicetree/bindings/soc/renesas/sh.yaml | 27 +
.../bindings/timer/renesas,tmu.yaml | 2 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/sh/Kconfig | 33 +-
arch/sh/boards/Kconfig | 23 +-
arch/sh/boards/of-generic.c | 28 +-
arch/sh/boot/compressed/head_32.S | 5 +-
arch/sh/boot/dts/Makefile | 5 +
arch/sh/boot/dts/j2_mimas_v2.dts | 2 +-
arch/sh/boot/dts/landisk.dts | 77 +++
arch/sh/boot/dts/rts7751r2dplus.dts | 169 ++++++
arch/sh/boot/dts/sh7751r.dtsi | 105 ++++
arch/sh/boot/dts/usl-5p.dts | 85 ++++
arch/sh/configs/j2_defconfig | 11 +-
arch/sh/configs/landisk-of_defconfig | 104 ++++
arch/sh/configs/rts7751r2dplus-of_defconfig | 75 +++
arch/sh/drivers/Makefile | 2 +
arch/sh/include/asm/io.h | 8 +
arch/sh/include/asm/irq.h | 10 +-
arch/sh/include/asm/pci.h | 4 +
arch/sh/include/asm/setup.h | 1 +
arch/sh/kernel/cpu/Makefile | 6 +-
arch/sh/kernel/cpu/irq/imask.c | 17 +
arch/sh/kernel/cpu/sh4/Makefile | 3 +
arch/sh/kernel/iomap.c | 18 +
arch/sh/kernel/setup.c | 36 +-
arch/sh/kernel/time.c | 12 +
drivers/clk/clk-divider.c | 56 +-
drivers/clk/clk-gate.c | 62 ++-
drivers/clk/renesas/Kconfig | 13 +-
drivers/clk/renesas/Makefile | 1 +
drivers/clk/renesas/clk-sh7750.c | 480 ++++++++++++++++++
drivers/clocksource/sh_tmu.c | 198 +++++---
drivers/irqchip/Kconfig | 15 +
drivers/irqchip/Makefile | 3 +
drivers/irqchip/irq-renesas-sh7751.c | 282 ++++++++++
drivers/irqchip/irq-renesas-sh7751irl.c | 221 ++++++++
drivers/mfd/sm501.c | 315 ++++++++++++
drivers/pci/controller/Kconfig | 9 +
drivers/pci/controller/Makefile | 1 +
drivers/pci/controller/pci-sh7751.c | 342 +++++++++++++
drivers/tty/serial/Kconfig | 2 +-
drivers/tty/serial/sh-sci.c | 6 +-
drivers/video/fbdev/sm501fb.c | 106 ++++
include/dt-bindings/clock/sh7750-cpg.h | 26 +
include/dt-bindings/display/sm501.h | 76 +++
.../renesas,sh7751-intc.h | 19 +
include/linux/clk-provider.h | 22 +-
include/linux/sh_intc.h | 7 +-
57 files changed, 3713 insertions(+), 187 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/renesas,sh7750-cpg.yaml
create mode 100644 Documentation/devicetree/bindings/display/smi,sm501.yaml
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-intc.yaml
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-irl-ext.yaml
create mode 100644 Documentation/devicetree/bindings/pci/renesas,sh7751-pci.yaml
create mode 100644 Documentation/devicetree/bindings/sh/cpus.yaml
create mode 100644 Documentation/devicetree/bindings/soc/renesas/sh.yaml
create mode 100644 arch/sh/boot/dts/landisk.dts
create mode 100644 arch/sh/boot/dts/rts7751r2dplus.dts
create mode 100644 arch/sh/boot/dts/sh7751r.dtsi
create mode 100644 arch/sh/boot/dts/usl-5p.dts
create mode 100644 arch/sh/configs/landisk-of_defconfig
create mode 100644 arch/sh/configs/rts7751r2dplus-of_defconfig
create mode 100644 drivers/clk/renesas/clk-sh7750.c
create mode 100644 drivers/irqchip/irq-renesas-sh7751.c
create mode 100644 drivers/irqchip/irq-renesas-sh7751irl.c
create mode 100644 drivers/pci/controller/pci-sh7751.c
create mode 100644 include/dt-bindings/clock/sh7750-cpg.h
create mode 100644 include/dt-bindings/display/sm501.h
create mode 100644 include/dt-bindings/interrupt-controller/renesas,sh7751-intc.h
--
2.39.2
^ permalink raw reply
* [RESEND v7 01/37] sh: passing FDT address to kernel startup.
From: Yoshinori Sato @ 2024-04-04 5:14 UTC (permalink / raw)
To: linux-sh
Cc: Yoshinori Sato, Damien Le Moal, Niklas Cassel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
Michael Turquette, Stephen Boyd, David Airlie, Daniel Vetter,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
Thomas Gleixner, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Greg Kroah-Hartman, Jiri Slaby,
Magnus Damm, Daniel Lezcano, Rich Felker,
John Paul Adrian Glaubitz, Lee Jones, Helge Deller,
Heiko Stuebner, Shawn Guo, Sebastian Reichel, Chris Morgan,
Linus Walleij, Arnd Bergmann, David Rientjes, Hyeonggon Yoo,
Vlastimil Babka, Baoquan He, Andrew Morton, Guenter Roeck,
Kefeng Wang, Stephen Rothwell, Javier Martinez Canillas, Guo Ren,
Azeem Shaikh, Max Filippov, Jonathan Corbet, Jacky Huang,
Herve Codina, Manikanta Guntupalli, Anup Patel, Biju Das,
Uwe Kleine-König, Sam Ravnborg, Sergey Shtylyov,
Laurent Pinchart, linux-ide, devicetree, linux-kernel,
linux-renesas-soc, linux-clk, dri-devel, linux-pci, linux-serial,
linux-fbdev
In-Reply-To: <cover.1712207606.git.ysato@users.sourceforge.jp>
R4 is caller saved in SH ABI.
Save it so it doesn't get corrupted until it's needed for initialization.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/sh/boot/compressed/head_32.S | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/sh/boot/compressed/head_32.S b/arch/sh/boot/compressed/head_32.S
index 7bb168133dbb..6be59851122e 100644
--- a/arch/sh/boot/compressed/head_32.S
+++ b/arch/sh/boot/compressed/head_32.S
@@ -15,7 +15,8 @@ startup:
/* Load initial status register */
mov.l init_sr, r1
ldc r1, sr
-
+ /* Save FDT address */
+ mov r4, r13
/* Move myself to proper location if necessary */
mova 1f, r0
mov.l 1f, r2
@@ -84,7 +85,7 @@ l1:
/* Jump to the start of the decompressed kernel */
mov.l kernel_start_addr, r0
jmp @r0
- nop
+ mov r13, r4
.align 2
bss_start_addr:
--
2.39.2
^ permalink raw reply related
* [RESEND v7 02/37] sh: Kconfig unified OF supported targets.
From: Yoshinori Sato @ 2024-04-04 5:14 UTC (permalink / raw)
To: linux-sh
Cc: Yoshinori Sato, Damien Le Moal, Niklas Cassel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
Michael Turquette, Stephen Boyd, David Airlie, Daniel Vetter,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
Thomas Gleixner, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Greg Kroah-Hartman, Jiri Slaby,
Magnus Damm, Daniel Lezcano, Rich Felker,
John Paul Adrian Glaubitz, Lee Jones, Helge Deller,
Heiko Stuebner, Shawn Guo, Sebastian Reichel, Chris Morgan,
Linus Walleij, Arnd Bergmann, David Rientjes, Hyeonggon Yoo,
Vlastimil Babka, Baoquan He, Andrew Morton, Guenter Roeck,
Kefeng Wang, Stephen Rothwell, Javier Martinez Canillas, Guo Ren,
Azeem Shaikh, Max Filippov, Jonathan Corbet, Jacky Huang,
Herve Codina, Manikanta Guntupalli, Anup Patel, Biju Das,
Uwe Kleine-König, Sam Ravnborg, Sergey Shtylyov,
Laurent Pinchart, linux-ide, devicetree, linux-kernel,
linux-renesas-soc, linux-clk, dri-devel, linux-pci, linux-serial,
linux-fbdev
In-Reply-To: <cover.1712207606.git.ysato@users.sourceforge.jp>
Targets that support OF should be treated as one board.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/sh/Kconfig | 1 +
arch/sh/boards/Kconfig | 23 +++++++++++++----------
2 files changed, 14 insertions(+), 10 deletions(-)
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 2ad3e29f0ebe..cbf48e69ad74 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -711,6 +711,7 @@ choice
prompt "Kernel command line"
optional
default CMDLINE_OVERWRITE
+ depends on !OF || USE_BUILTIN_DTB
help
Setting this option allows the kernel command line arguments
to be set.
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 109bec4dad94..46387fd040ad 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -19,16 +19,9 @@ config SH_DEVICE_TREE
select TIMER_OF
select COMMON_CLK
select GENERIC_CALIBRATE_DELAY
-
-config SH_JCORE_SOC
- bool "J-Core SoC"
- select SH_DEVICE_TREE
- select CLKSRC_JCORE_PIT
- select JCORE_AIC
- depends on CPU_J2
- help
- Select this option to include drivers core components of the
- J-Core SoC, including interrupt controllers and timers.
+ select GENERIC_IRQ_CHIP
+ select SYS_SUPPORTS_PCI
+ select GENERIC_PCI_IOMAP if PCI
config SH_SOLUTION_ENGINE
bool "SolutionEngine"
@@ -293,6 +286,7 @@ config SH_LANDISK
bool "LANDISK"
depends on CPU_SUBTYPE_SH7751R
select HAVE_PCI
+ select SYS_SUPPORTS_PCI
help
I-O DATA DEVICE, INC. "LANDISK Series" support.
@@ -369,6 +363,15 @@ config SH_APSH4AD0A
help
Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
+config SH_OF_BOARD
+ bool "General Open Firmware boards"
+ select SH_DEVICE_TREE
+ select CLKSRC_JCORE_PIT if CPU_J2
+ select JCORE_AIC if CPU_J2
+ select HAVE_PCI if CPU_SUBTYPE_SH7751R
+ help
+ This board means general OF supported targets.
+
source "arch/sh/boards/mach-r2d/Kconfig"
source "arch/sh/boards/mach-highlander/Kconfig"
source "arch/sh/boards/mach-sdk7780/Kconfig"
--
2.39.2
^ permalink raw reply related
* [RESEND v7 03/37] sh: Enable OF support for build and configuration.
From: Yoshinori Sato @ 2024-04-04 5:14 UTC (permalink / raw)
To: linux-sh
Cc: Yoshinori Sato, Damien Le Moal, Niklas Cassel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
Michael Turquette, Stephen Boyd, David Airlie, Daniel Vetter,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
Thomas Gleixner, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Greg Kroah-Hartman, Jiri Slaby,
Magnus Damm, Daniel Lezcano, Rich Felker,
John Paul Adrian Glaubitz, Lee Jones, Helge Deller,
Heiko Stuebner, Shawn Guo, Sebastian Reichel, Chris Morgan,
Linus Walleij, Arnd Bergmann, David Rientjes, Hyeonggon Yoo,
Vlastimil Babka, Baoquan He, Andrew Morton, Guenter Roeck,
Kefeng Wang, Stephen Rothwell, Javier Martinez Canillas, Guo Ren,
Azeem Shaikh, Max Filippov, Jonathan Corbet, Jacky Huang,
Herve Codina, Manikanta Guntupalli, Anup Patel, Biju Das,
Uwe Kleine-König, Sam Ravnborg, Sergey Shtylyov,
Laurent Pinchart, linux-ide, devicetree, linux-kernel,
linux-renesas-soc, linux-clk, dri-devel, linux-pci, linux-serial,
linux-fbdev
In-Reply-To: <cover.1712207606.git.ysato@users.sourceforge.jp>
IRQ, CLK and PCI will be migrated to a common driver framework.
So if OF, disable the SH specific drivers.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/sh/Kconfig | 11 ++++++-----
arch/sh/drivers/Makefile | 2 ++
arch/sh/kernel/cpu/Makefile | 9 +++++++--
arch/sh/kernel/cpu/sh4/Makefile | 3 +++
4 files changed, 18 insertions(+), 7 deletions(-)
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index cbf48e69ad74..6711cde0d973 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -66,10 +66,10 @@ config SUPERH
select MODULES_USE_ELF_RELA
select NEED_SG_DMA_LENGTH
select NO_DMA if !MMU && !DMA_COHERENT
- select NO_GENERIC_PCI_IOPORT_MAP if PCI
+ select NO_GENERIC_PCI_IOPORT_MAP if !SH_DEVICE_TREE
select OLD_SIGACTION
select OLD_SIGSUSPEND
- select PCI_DOMAINS if PCI
+ select PCI_DOMAINS if PCI && !SH_DEVICE_TREE
select PERF_EVENTS
select PERF_USE_VMALLOC
select RTC_LIB
@@ -153,7 +153,7 @@ menu "System type"
#
config CPU_SH2
bool
- select SH_INTC
+ select SH_INTC if !SH_DEVICE_TREE
config CPU_SH2A
bool
@@ -179,7 +179,7 @@ config CPU_SH4
select CPU_HAS_INTEVT
select CPU_HAS_SR_RB
select CPU_HAS_FPU if !CPU_SH4AL_DSP
- select SH_INTC
+ select SH_INTC if !SH_DEVICE_TREE
select SYS_SUPPORTS_SH_TMU
config CPU_SH4A
@@ -522,6 +522,7 @@ config SH_PCLK_FREQ
config SH_CLK_CPG
def_bool y
+ depends on !COMMON_CLK
config SH_CLK_CPG_LEGACY
depends on SH_CLK_CPG
@@ -666,7 +667,7 @@ config BUILTIN_DTB_SOURCE
kernel.
config ZERO_PAGE_OFFSET
- hex
+ hex "Zero page offset"
default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \
SH_7751_SOLUTION_ENGINE
default "0x00004000" if PAGE_SIZE_16KB || SH_SH03
diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile
index 8bd10b904bf9..83f609ca1eb4 100644
--- a/arch/sh/drivers/Makefile
+++ b/arch/sh/drivers/Makefile
@@ -5,6 +5,8 @@
obj-y += dma/ platform_early.o
+ifndef CONFIG_SH_DEVICE_TREE
obj-$(CONFIG_PCI) += pci/
+endif
obj-$(CONFIG_PUSH_SWITCH) += push-switch.o
obj-$(CONFIG_HEARTBEAT) += heartbeat.o
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index 46118236bf04..e00ebf134985 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -16,6 +16,11 @@ obj-$(CONFIG_ARCH_SHMOBILE) += shmobile/
# Common interfaces.
obj-$(CONFIG_SH_ADC) += adc.o
+ifndef CONFIG_COMMON_CLK
+obj-y += clock.o
obj-$(CONFIG_SH_CLK_CPG_LEGACY) += clock-cpg.o
-
-obj-y += irq/ init.o clock.o fpu.o pfc.o proc.o
+endif
+ifndef CONFIG_GENERIC_IRQ_CHIP
+obj-y += irq/
+endif
+obj-y += init.o fpu.o pfc.o proc.o
diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile
index 02e3ee16e15c..33da4c86feff 100644
--- a/arch/sh/kernel/cpu/sh4/Makefile
+++ b/arch/sh/kernel/cpu/sh4/Makefile
@@ -15,6 +15,7 @@ perf-$(CONFIG_CPU_SUBTYPE_SH7750) := perf_event.o
perf-$(CONFIG_CPU_SUBTYPE_SH7750S) := perf_event.o
perf-$(CONFIG_CPU_SUBTYPE_SH7091) := perf_event.o
+ifndef CONFIG_SH_DEVICE_TREE
# CPU subtype setup
obj-$(CONFIG_CPU_SUBTYPE_SH7750) += setup-sh7750.o
obj-$(CONFIG_CPU_SUBTYPE_SH7750R) += setup-sh7750.o
@@ -29,5 +30,7 @@ ifndef CONFIG_CPU_SH4A
clock-$(CONFIG_CPU_SH4) := clock-sh4.o
endif
+endif # CONFIG_SH_DEVICE_TREE
+
obj-y += $(clock-y)
obj-$(CONFIG_PERF_EVENTS) += $(perf-y)
--
2.39.2
^ permalink raw reply related
* [RESEND v7 04/37] dt-bindings: interrupt-controller: Add header for Renesas SH3/4 INTC.
From: Yoshinori Sato @ 2024-04-04 5:14 UTC (permalink / raw)
To: linux-sh
Cc: Yoshinori Sato, Damien Le Moal, Niklas Cassel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
Michael Turquette, Stephen Boyd, David Airlie, Daniel Vetter,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
Thomas Gleixner, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Greg Kroah-Hartman, Jiri Slaby,
Magnus Damm, Daniel Lezcano, Rich Felker,
John Paul Adrian Glaubitz, Lee Jones, Helge Deller,
Heiko Stuebner, Shawn Guo, Sebastian Reichel, Chris Morgan,
Linus Walleij, Arnd Bergmann, David Rientjes, Hyeonggon Yoo,
Vlastimil Babka, Baoquan He, Andrew Morton, Guenter Roeck,
Kefeng Wang, Stephen Rothwell, Javier Martinez Canillas, Guo Ren,
Azeem Shaikh, Max Filippov, Jonathan Corbet, Jacky Huang,
Herve Codina, Manikanta Guntupalli, Anup Patel, Biju Das,
Uwe Kleine-König, Sam Ravnborg, Sergey Shtylyov,
Laurent Pinchart, linux-ide, devicetree, linux-kernel,
linux-renesas-soc, linux-clk, dri-devel, linux-pci, linux-serial,
linux-fbdev
In-Reply-To: <cover.1712207606.git.ysato@users.sourceforge.jp>
Renesas SH7751 Interrupt controller priority register define.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
.../renesas,sh7751-intc.h | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
create mode 100644 include/dt-bindings/interrupt-controller/renesas,sh7751-intc.h
diff --git a/include/dt-bindings/interrupt-controller/renesas,sh7751-intc.h b/include/dt-bindings/interrupt-controller/renesas,sh7751-intc.h
new file mode 100644
index 000000000000..0543bd1b895e
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/renesas,sh7751-intc.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+ *
+ * SH3/4 INTC IPR register offsets (Address / bits)
+ */
+
+#ifndef __DT_BINDINGS_RENESAS_SH7751_INTC
+#define __DT_BINDINGS_RENESAS_SH7751_INTC
+
+#define IPRA 0
+#define IPRB 4
+#define IPRC 8
+#define IPRD 12
+#define INTPRI00 256
+#define IPR_B12 12
+#define IPR_B8 8
+#define IPR_B4 4
+#define IPR_B0 0
+
+#endif
--
2.39.2
^ permalink raw reply related
* [RESEND v7 05/37] sh: GENERIC_IRQ_CHIP support for CONFIG_OF=y
From: Yoshinori Sato @ 2024-04-04 5:14 UTC (permalink / raw)
To: linux-sh
Cc: Yoshinori Sato, Damien Le Moal, Niklas Cassel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
Michael Turquette, Stephen Boyd, David Airlie, Daniel Vetter,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
Thomas Gleixner, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Greg Kroah-Hartman, Jiri Slaby,
Magnus Damm, Daniel Lezcano, Rich Felker,
John Paul Adrian Glaubitz, Lee Jones, Helge Deller,
Heiko Stuebner, Shawn Guo, Sebastian Reichel, Chris Morgan,
Linus Walleij, Arnd Bergmann, David Rientjes, Hyeonggon Yoo,
Vlastimil Babka, Baoquan He, Andrew Morton, Guenter Roeck,
Kefeng Wang, Stephen Rothwell, Javier Martinez Canillas, Guo Ren,
Azeem Shaikh, Max Filippov, Jonathan Corbet, Jacky Huang,
Herve Codina, Manikanta Guntupalli, Anup Patel, Biju Das,
Uwe Kleine-König, Sam Ravnborg, Sergey Shtylyov,
Laurent Pinchart, linux-ide, devicetree, linux-kernel,
linux-renesas-soc, linux-clk, dri-devel, linux-pci, linux-serial,
linux-fbdev
In-Reply-To: <cover.1712207606.git.ysato@users.sourceforge.jp>
Remove unused function prototype.
Add helper update_sr_imask. use for SH7751 irq driver.
Add stub intc_finalize.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/sh/include/asm/io.h | 2 ++
arch/sh/include/asm/irq.h | 10 ++++++++--
arch/sh/kernel/cpu/Makefile | 5 +----
arch/sh/kernel/cpu/irq/imask.c | 17 +++++++++++++++++
include/linux/sh_intc.h | 7 ++++++-
5 files changed, 34 insertions(+), 7 deletions(-)
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index cf5eab840d57..5c544cf5201b 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -121,7 +121,9 @@ __BUILD_MEMORY_STRING(__raw_, q, u64)
#define ioport_map ioport_map
#define ioport_unmap ioport_unmap
+#ifndef CONFIG_SH_DEVICE_TREE
#define pci_iounmap pci_iounmap
+#endif
#define ioread8 ioread8
#define ioread16 ioread16
diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h
index 0f384b1f45ca..3d897229dcc4 100644
--- a/arch/sh/include/asm/irq.h
+++ b/arch/sh/include/asm/irq.h
@@ -16,8 +16,8 @@
/*
* Simple Mask Register Support
*/
-extern void make_maskreg_irq(unsigned int irq);
-extern unsigned short *irq_mask_register;
+
+void update_sr_imask(unsigned int irq, bool enable);
/*
* PINT IRQs
@@ -54,4 +54,10 @@ extern void irq_finish(unsigned int irq);
#include <asm-generic/irq.h>
+/* SH3/4 INTC stuff */
+/* IRL level 0 - 15 */
+#define NR_IRL 15
+/* IRL0 -> IRQ16 */
+#define IRL_BASE_IRQ 16
+
#endif /* __ASM_SH_IRQ_H */
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index e00ebf134985..ad12807fae9c 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -20,7 +20,4 @@ ifndef CONFIG_COMMON_CLK
obj-y += clock.o
obj-$(CONFIG_SH_CLK_CPG_LEGACY) += clock-cpg.o
endif
-ifndef CONFIG_GENERIC_IRQ_CHIP
-obj-y += irq/
-endif
-obj-y += init.o fpu.o pfc.o proc.o
+obj-y += init.o fpu.o pfc.o proc.o irq/
diff --git a/arch/sh/kernel/cpu/irq/imask.c b/arch/sh/kernel/cpu/irq/imask.c
index 572585c3f2fd..7589ca7c506c 100644
--- a/arch/sh/kernel/cpu/irq/imask.c
+++ b/arch/sh/kernel/cpu/irq/imask.c
@@ -51,6 +51,7 @@ static inline void set_interrupt_registers(int ip)
: "t");
}
+#ifndef CONFIG_GENERIC_IRQ_CHIP
static void mask_imask_irq(struct irq_data *data)
{
unsigned int irq = data->irq;
@@ -83,3 +84,19 @@ void make_imask_irq(unsigned int irq)
irq_set_chip_and_handler_name(irq, &imask_irq_chip, handle_level_irq,
"level");
}
+#else
+void update_sr_imask(unsigned int irq, bool enable)
+{
+ if (enable) {
+ set_bit(irq, imask_mask);
+ interrupt_priority = IMASK_PRIORITY -
+ find_first_bit(imask_mask, IMASK_PRIORITY);
+ } else {
+ clear_bit(irq, imask_mask);
+ if (interrupt_priority < IMASK_PRIORITY - irq)
+ interrupt_priority = IMASK_PRIORITY - irq;
+ }
+ set_interrupt_registers(interrupt_priority);
+}
+EXPORT_SYMBOL(update_sr_imask);
+#endif
diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h
index 27ae79191bdc..994b5b05a0d7 100644
--- a/include/linux/sh_intc.h
+++ b/include/linux/sh_intc.h
@@ -139,8 +139,13 @@ struct intc_desc symbol __initdata = { \
int register_intc_controller(struct intc_desc *desc);
int intc_set_priority(unsigned int irq, unsigned int prio);
int intc_irq_lookup(const char *chipname, intc_enum enum_id);
+#ifndef CONFIG_SH_DEVICE_TREE
void intc_finalize(void);
-
+#else
+static inline void intc_finalize(void)
+{
+}
+#endif
#ifdef CONFIG_INTC_USERIMASK
int register_intc_userimask(unsigned long addr);
#else
--
2.39.2
^ permalink raw reply related
* [RESEND v7 06/37] sh: kernel/setup Update DT support.
From: Yoshinori Sato @ 2024-04-04 5:14 UTC (permalink / raw)
To: linux-sh
Cc: Yoshinori Sato, Damien Le Moal, Niklas Cassel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
Michael Turquette, Stephen Boyd, David Airlie, Daniel Vetter,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
Thomas Gleixner, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Greg Kroah-Hartman, Jiri Slaby,
Magnus Damm, Daniel Lezcano, Rich Felker,
John Paul Adrian Glaubitz, Lee Jones, Helge Deller,
Heiko Stuebner, Shawn Guo, Sebastian Reichel, Chris Morgan,
Linus Walleij, Arnd Bergmann, David Rientjes, Hyeonggon Yoo,
Vlastimil Babka, Baoquan He, Andrew Morton, Guenter Roeck,
Kefeng Wang, Stephen Rothwell, Javier Martinez Canillas, Guo Ren,
Azeem Shaikh, Max Filippov, Jonathan Corbet, Jacky Huang,
Herve Codina, Manikanta Guntupalli, Anup Patel, Biju Das,
Uwe Kleine-König, Sam Ravnborg, Sergey Shtylyov,
Laurent Pinchart, linux-ide, devicetree, linux-kernel,
linux-renesas-soc, linux-clk, dri-devel, linux-pci, linux-serial,
linux-fbdev
In-Reply-To: <cover.1712207606.git.ysato@users.sourceforge.jp>
Fix extrnal fdt initialize and bootargs.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/sh/Kconfig | 23 +++++++++++------------
arch/sh/include/asm/setup.h | 1 +
arch/sh/kernel/setup.c | 36 +++++++++++++++++++++++-------------
3 files changed, 35 insertions(+), 25 deletions(-)
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 6711cde0d973..242cf30e704d 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -708,17 +708,22 @@ config ROMIMAGE_MMCIF
first part of the romImage which in turn loads the rest the kernel
image to RAM using the MMCIF hardware block.
+config CMDLINE
+ string "Kernel command line arguments string"
+ default "console=ttySC1,115200"
+
choice
prompt "Kernel command line"
- optional
- default CMDLINE_OVERWRITE
- depends on !OF || USE_BUILTIN_DTB
+ default CMDLINE_BOOTLOADER
+
+config CMDLINE_BOOTLOADER
+ bool "Use bootloader kernel arguments"
help
- Setting this option allows the kernel command line arguments
- to be set.
+ Uses the command-line options passed by the boot loader.
+ If boot loader dosen't provide kernel argments, Use built-in argments.
config CMDLINE_OVERWRITE
- bool "Overwrite bootloader kernel arguments"
+ bool "Overwrite built-in kernel arguments"
help
Given string will overwrite any arguments passed in by
a bootloader.
@@ -730,12 +735,6 @@ config CMDLINE_EXTEND
by a bootloader.
endchoice
-
-config CMDLINE
- string "Kernel command line arguments string"
- depends on CMDLINE_OVERWRITE || CMDLINE_EXTEND
- default "console=ttySC1,115200"
-
endmenu
menu "Bus options"
diff --git a/arch/sh/include/asm/setup.h b/arch/sh/include/asm/setup.h
index fc807011187f..84bb23a771f3 100644
--- a/arch/sh/include/asm/setup.h
+++ b/arch/sh/include/asm/setup.h
@@ -21,5 +21,6 @@
void sh_mv_setup(void);
void check_for_initrd(void);
void per_cpu_trap_init(void);
+void sh_fdt_init(phys_addr_t dt_phys);
#endif /* _SH_SETUP_H */
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 620e5cf8ae1e..42e6292a40cf 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -30,6 +30,7 @@
#include <linux/memblock.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
+#include <linux/libfdt.h>
#include <linux/uaccess.h>
#include <uapi/linux/mount.h>
#include <asm/io.h>
@@ -269,8 +270,22 @@ void __ref sh_fdt_init(phys_addr_t dt_phys)
void __init setup_arch(char **cmdline_p)
{
+#if defined(CONFIG_OF) && defined(CONFIG_OF_EARLY_FLATTREE)
+ if (IS_ENABLED(CONFIG_USE_BUILTIN_DTB)) {
+ /* Relocate Embedded DTB */
+ unflatten_and_copy_device_tree();
+ } else if (initial_boot_params) {
+ /* Reserve external DTB area */
+ memblock_reserve(__pa(initial_boot_params),
+ fdt_totalsize(initial_boot_params));
+ unflatten_device_tree();
+ }
+ /* copy from /chosen/bootargs */
+ strscpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
+#endif
enable_mmu();
+#ifndef CONFIG_OF
ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
printk(KERN_NOTICE "Boot params:\n"
@@ -299,14 +314,17 @@ void __init setup_arch(char **cmdline_p)
bss_resource.start = virt_to_phys(__bss_start);
bss_resource.end = virt_to_phys(__bss_stop)-1;
-#ifdef CONFIG_CMDLINE_OVERWRITE
- strscpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
-#else
- strscpy(command_line, COMMAND_LINE, sizeof(command_line));
+#endif
+#if !defined(CONFIG_OF) || defined(CONFIG_USE_BUILTIN_DTB)
+ if (*COMMAND_LINE)
+ strscpy(command_line, COMMAND_LINE, sizeof(command_line));
+#endif
+ if (*command_line == '\0' || IS_ENABLED(CONFIG_CMDLINE_OVERWRITE))
+ /* Use built-in parameter */
+ strscpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
#ifdef CONFIG_CMDLINE_EXTEND
strlcat(command_line, " ", sizeof(command_line));
strlcat(command_line, CONFIG_CMDLINE, sizeof(command_line));
-#endif
#endif
/* Save unparsed command line copy for /proc/cmdline */
@@ -322,14 +340,6 @@ void __init setup_arch(char **cmdline_p)
/* Let earlyprintk output early console messages */
sh_early_platform_driver_probe("earlyprintk", 1, 1);
-#ifdef CONFIG_OF_EARLY_FLATTREE
-#ifdef CONFIG_USE_BUILTIN_DTB
- unflatten_and_copy_device_tree();
-#else
- unflatten_device_tree();
-#endif
-#endif
-
paging_init();
/* Perform the machine specific initialisation */
--
2.39.2
^ permalink raw reply related
* [RESEND v7 07/37] sh: Fix COMMON_CLK support in CONFIG_OF=y.
From: Yoshinori Sato @ 2024-04-04 5:14 UTC (permalink / raw)
To: linux-sh
Cc: Yoshinori Sato, Damien Le Moal, Niklas Cassel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
Michael Turquette, Stephen Boyd, David Airlie, Daniel Vetter,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
Thomas Gleixner, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Greg Kroah-Hartman, Jiri Slaby,
Magnus Damm, Daniel Lezcano, Rich Felker,
John Paul Adrian Glaubitz, Lee Jones, Helge Deller,
Heiko Stuebner, Shawn Guo, Sebastian Reichel, Chris Morgan,
Linus Walleij, Arnd Bergmann, David Rientjes, Hyeonggon Yoo,
Vlastimil Babka, Baoquan He, Andrew Morton, Guenter Roeck,
Kefeng Wang, Stephen Rothwell, Javier Martinez Canillas, Guo Ren,
Azeem Shaikh, Max Filippov, Jonathan Corbet, Jacky Huang,
Herve Codina, Manikanta Guntupalli, Anup Patel, Biju Das,
Uwe Kleine-König, Sam Ravnborg, Sergey Shtylyov,
Laurent Pinchart, linux-ide, devicetree, linux-kernel,
linux-renesas-soc, linux-clk, dri-devel, linux-pci, linux-serial,
linux-fbdev
In-Reply-To: <cover.1712207606.git.ysato@users.sourceforge.jp>
Initialize the clock and timer using the COMMON_CLK procedure.
sh's earlytimer mechanism doesn't work properly in OF,
so timer initialization is delayed.
If CONFIG_OF=y, perform the general timer initialization procedure.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/sh/boards/of-generic.c | 28 ++++------------------------
arch/sh/kernel/time.c | 12 ++++++++++++
2 files changed, 16 insertions(+), 24 deletions(-)
diff --git a/arch/sh/boards/of-generic.c b/arch/sh/boards/of-generic.c
index f7f3e618e85b..f1ca5a914c11 100644
--- a/arch/sh/boards/of-generic.c
+++ b/arch/sh/boards/of-generic.c
@@ -8,6 +8,7 @@
#include <linux/of.h>
#include <linux/of_clk.h>
#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
#include <linux/clocksource.h>
#include <linux/irqchip.h>
#include <asm/machvec.h>
@@ -98,16 +99,7 @@ static void sh_of_smp_probe(void)
#endif
-static void noop(void)
-{
-}
-
-static int noopi(void)
-{
- return 0;
-}
-
-static void __init sh_of_mem_reserve(void)
+static void __init sh_of_mem_init(void)
{
early_init_fdt_reserve_self();
early_init_fdt_scan_reserved_mem();
@@ -140,25 +132,13 @@ static void __init sh_of_init_irq(void)
irqchip_init();
}
-static int __init sh_of_clk_init(void)
-{
-#ifdef CONFIG_COMMON_CLK
- /* Disabled pending move to COMMON_CLK framework. */
- pr_info("SH generic board support: scanning for clk providers\n");
- of_clk_init(NULL);
-#endif
- return 0;
-}
-
static struct sh_machine_vector __initmv sh_of_generic_mv = {
.mv_setup = sh_of_setup,
.mv_name = "devicetree", /* replaced by DT root's model */
.mv_irq_demux = sh_of_irq_demux,
.mv_init_irq = sh_of_init_irq,
- .mv_clk_init = sh_of_clk_init,
- .mv_mode_pins = noopi,
- .mv_mem_init = noop,
- .mv_mem_reserve = sh_of_mem_reserve,
+ .mv_mode_pins = generic_mode_pins,
+ .mv_mem_init = sh_of_mem_init,
};
struct sh_clk_ops;
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
index 821a09cbd605..ce5b7c2f8628 100644
--- a/arch/sh/kernel/time.c
+++ b/arch/sh/kernel/time.c
@@ -19,7 +19,9 @@
#include <asm/clock.h>
#include <asm/rtc.h>
#include <asm/platform_early.h>
+#include <linux/of_clk.h>
+#ifndef CONFIG_SH_DEVICE_TREE
static void __init sh_late_time_init(void)
{
/*
@@ -43,3 +45,13 @@ void __init time_init(void)
late_time_init = sh_late_time_init;
}
+#else
+/* CONFIG_SH_DEVICE_TREE */
+void __init time_init(void)
+{
+ pr_info("SH generic board support: scanning for clk providers\n");
+
+ of_clk_init(NULL);
+ timer_probe();
+}
+#endif
--
2.39.2
^ permalink raw reply related
* [RESEND v7 08/37] clocksource: sh_tmu: CLOCKSOURCE support.
From: Yoshinori Sato @ 2024-04-04 5:14 UTC (permalink / raw)
To: linux-sh
Cc: Yoshinori Sato, Damien Le Moal, Niklas Cassel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
Michael Turquette, Stephen Boyd, David Airlie, Daniel Vetter,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
Thomas Gleixner, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Greg Kroah-Hartman, Jiri Slaby,
Magnus Damm, Daniel Lezcano, Rich Felker,
John Paul Adrian Glaubitz, Lee Jones, Helge Deller,
Heiko Stuebner, Shawn Guo, Sebastian Reichel, Chris Morgan,
Linus Walleij, Arnd Bergmann, David Rientjes, Hyeonggon Yoo,
Vlastimil Babka, Baoquan He, Andrew Morton, Guenter Roeck,
Kefeng Wang, Stephen Rothwell, Javier Martinez Canillas, Guo Ren,
Azeem Shaikh, Max Filippov, Jonathan Corbet, Jacky Huang,
Herve Codina, Manikanta Guntupalli, Anup Patel, Biju Das,
Uwe Kleine-König, Sam Ravnborg, Sergey Shtylyov,
Laurent Pinchart, linux-ide, devicetree, linux-kernel,
linux-renesas-soc, linux-clk, dri-devel, linux-pci, linux-serial,
linux-fbdev
In-Reply-To: <cover.1712207606.git.ysato@users.sourceforge.jp>
Allows initialization as CLOCKSOURCE.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
drivers/clocksource/sh_tmu.c | 198 ++++++++++++++++++++++++-----------
1 file changed, 134 insertions(+), 64 deletions(-)
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index beffff81c00f..59f9da7fd987 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -17,6 +17,8 @@
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
@@ -51,6 +53,7 @@ struct sh_tmu_channel {
struct sh_tmu_device {
struct platform_device *pdev;
+ struct device_node *np;
void __iomem *mapbase;
struct clk *clk;
@@ -65,6 +68,7 @@ struct sh_tmu_device {
bool has_clockevent;
bool has_clocksource;
+ const char *name;
};
#define TSTR -1 /* shared register */
@@ -148,8 +152,8 @@ static int __sh_tmu_enable(struct sh_tmu_channel *ch)
/* enable clock */
ret = clk_enable(ch->tmu->clk);
if (ret) {
- dev_err(&ch->tmu->pdev->dev, "ch%u: cannot enable clock\n",
- ch->index);
+ pr_err("%s ch%u: cannot enable clock\n",
+ ch->tmu->name, ch->index);
return ret;
}
@@ -174,9 +178,10 @@ static int sh_tmu_enable(struct sh_tmu_channel *ch)
if (ch->enable_count++ > 0)
return 0;
- pm_runtime_get_sync(&ch->tmu->pdev->dev);
- dev_pm_syscore_device(&ch->tmu->pdev->dev, true);
-
+ if (ch->tmu->pdev) {
+ pm_runtime_get_sync(&ch->tmu->pdev->dev);
+ dev_pm_syscore_device(&ch->tmu->pdev->dev, true);
+ }
return __sh_tmu_enable(ch);
}
@@ -202,8 +207,10 @@ static void sh_tmu_disable(struct sh_tmu_channel *ch)
__sh_tmu_disable(ch);
- dev_pm_syscore_device(&ch->tmu->pdev->dev, false);
- pm_runtime_put(&ch->tmu->pdev->dev);
+ if (ch->tmu->pdev) {
+ dev_pm_syscore_device(&ch->tmu->pdev->dev, false);
+ pm_runtime_put(&ch->tmu->pdev->dev);
+ }
}
static void sh_tmu_set_next(struct sh_tmu_channel *ch, unsigned long delta,
@@ -245,7 +252,7 @@ static irqreturn_t sh_tmu_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct sh_tmu_channel *cs_to_sh_tmu(struct clocksource *cs)
+static inline struct sh_tmu_channel *cs_to_sh_tmu(struct clocksource *cs)
{
return container_of(cs, struct sh_tmu_channel, cs);
}
@@ -292,7 +299,8 @@ static void sh_tmu_clocksource_suspend(struct clocksource *cs)
if (--ch->enable_count == 0) {
__sh_tmu_disable(ch);
- dev_pm_genpd_suspend(&ch->tmu->pdev->dev);
+ if (ch->tmu->pdev)
+ dev_pm_genpd_suspend(&ch->tmu->pdev->dev);
}
}
@@ -304,7 +312,8 @@ static void sh_tmu_clocksource_resume(struct clocksource *cs)
return;
if (ch->enable_count++ == 0) {
- dev_pm_genpd_resume(&ch->tmu->pdev->dev);
+ if (ch->tmu->pdev)
+ dev_pm_genpd_resume(&ch->tmu->pdev->dev);
__sh_tmu_enable(ch);
}
}
@@ -324,14 +333,14 @@ static int sh_tmu_register_clocksource(struct sh_tmu_channel *ch,
cs->mask = CLOCKSOURCE_MASK(32);
cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
- dev_info(&ch->tmu->pdev->dev, "ch%u: used as clock source\n",
- ch->index);
+ pr_info("%s ch%u: used as clock source\n",
+ ch->tmu->name, ch->index);
clocksource_register_hz(cs, ch->tmu->rate);
return 0;
}
-static struct sh_tmu_channel *ced_to_sh_tmu(struct clock_event_device *ced)
+static inline struct sh_tmu_channel *ced_to_sh_tmu(struct clock_event_device *ced)
{
return container_of(ced, struct sh_tmu_channel, ced);
}
@@ -364,8 +373,8 @@ static int sh_tmu_clock_event_set_state(struct clock_event_device *ced,
if (clockevent_state_oneshot(ced) || clockevent_state_periodic(ced))
sh_tmu_disable(ch);
- dev_info(&ch->tmu->pdev->dev, "ch%u: used for %s clock events\n",
- ch->index, periodic ? "periodic" : "oneshot");
+ pr_info("%s ch%u: used for %s clock events\n",
+ ch->tmu->name, ch->index, periodic ? "periodic" : "oneshot");
sh_tmu_clock_event_start(ch, periodic);
return 0;
}
@@ -417,20 +426,22 @@ static void sh_tmu_register_clockevent(struct sh_tmu_channel *ch,
ced->set_state_shutdown = sh_tmu_clock_event_shutdown;
ced->set_state_periodic = sh_tmu_clock_event_set_periodic;
ced->set_state_oneshot = sh_tmu_clock_event_set_oneshot;
- ced->suspend = sh_tmu_clock_event_suspend;
- ced->resume = sh_tmu_clock_event_resume;
+ if (ch->tmu->pdev) {
+ ced->suspend = sh_tmu_clock_event_suspend;
+ ced->resume = sh_tmu_clock_event_resume;
+ }
- dev_info(&ch->tmu->pdev->dev, "ch%u: used for clock events\n",
- ch->index);
+ pr_info("%s ch%u: used for clock events\n",
+ ch->tmu->name, ch->index);
clockevents_config_and_register(ced, ch->tmu->rate, 0x300, 0xffffffff);
ret = request_irq(ch->irq, sh_tmu_interrupt,
IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
- dev_name(&ch->tmu->pdev->dev), ch);
+ ch->tmu->name, ch);
if (ret) {
- dev_err(&ch->tmu->pdev->dev, "ch%u: failed to request irq %d\n",
- ch->index, ch->irq);
+ pr_err("%s ch%u: failed to request irq %d\n",
+ ch->tmu->name, ch->index, ch->irq);
return;
}
}
@@ -465,28 +476,36 @@ static int sh_tmu_channel_setup(struct sh_tmu_channel *ch, unsigned int index,
else
ch->base = tmu->mapbase + 8 + ch->index * 12;
- ch->irq = platform_get_irq(tmu->pdev, index);
+ if (tmu->pdev)
+ ch->irq = platform_get_irq(tmu->pdev, index);
+ if (tmu->np)
+ ch->irq = of_irq_get(tmu->np, index);
+
if (ch->irq < 0)
return ch->irq;
ch->cs_enabled = false;
ch->enable_count = 0;
- return sh_tmu_register(ch, dev_name(&tmu->pdev->dev),
- clockevent, clocksource);
+ return sh_tmu_register(ch, tmu->name, clockevent, clocksource);
}
static int sh_tmu_map_memory(struct sh_tmu_device *tmu)
{
struct resource *res;
- res = platform_get_resource(tmu->pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&tmu->pdev->dev, "failed to get I/O memory\n");
- return -ENXIO;
+ if (tmu->pdev) {
+ res = platform_get_resource(tmu->pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ pr_err("sh_tmu failed to get I/O memory\n");
+ return -ENXIO;
+ }
+
+ tmu->mapbase = ioremap(res->start, resource_size(res));
}
+ if (tmu->np)
+ tmu->mapbase = of_iomap(tmu->np, 0);
- tmu->mapbase = ioremap(res->start, resource_size(res));
if (tmu->mapbase == NULL)
return -ENXIO;
@@ -495,7 +514,12 @@ static int sh_tmu_map_memory(struct sh_tmu_device *tmu)
static int sh_tmu_parse_dt(struct sh_tmu_device *tmu)
{
- struct device_node *np = tmu->pdev->dev.of_node;
+ struct device_node *np;
+
+ if (tmu->pdev)
+ np = tmu->pdev->dev.of_node;
+ if (tmu->np)
+ np = tmu->np;
tmu->model = SH_TMU;
tmu->num_channels = 3;
@@ -503,45 +527,19 @@ static int sh_tmu_parse_dt(struct sh_tmu_device *tmu)
of_property_read_u32(np, "#renesas,channels", &tmu->num_channels);
if (tmu->num_channels != 2 && tmu->num_channels != 3) {
- dev_err(&tmu->pdev->dev, "invalid number of channels %u\n",
- tmu->num_channels);
+ pr_err("%s: invalid number of channels %u\n",
+ tmu->name, tmu->num_channels);
return -EINVAL;
}
return 0;
}
-static int sh_tmu_setup(struct sh_tmu_device *tmu, struct platform_device *pdev)
+static int sh_tmu_setup(struct sh_tmu_device *tmu)
{
unsigned int i;
int ret;
- tmu->pdev = pdev;
-
- raw_spin_lock_init(&tmu->lock);
-
- if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
- ret = sh_tmu_parse_dt(tmu);
- if (ret < 0)
- return ret;
- } else if (pdev->dev.platform_data) {
- const struct platform_device_id *id = pdev->id_entry;
- struct sh_timer_config *cfg = pdev->dev.platform_data;
-
- tmu->model = id->driver_data;
- tmu->num_channels = hweight8(cfg->channels_mask);
- } else {
- dev_err(&tmu->pdev->dev, "missing platform data\n");
- return -ENXIO;
- }
-
- /* Get hold of clock. */
- tmu->clk = clk_get(&tmu->pdev->dev, "fck");
- if (IS_ERR(tmu->clk)) {
- dev_err(&tmu->pdev->dev, "cannot get clock\n");
- return PTR_ERR(tmu->clk);
- }
-
ret = clk_prepare(tmu->clk);
if (ret < 0)
goto err_clk_put;
@@ -557,7 +555,7 @@ static int sh_tmu_setup(struct sh_tmu_device *tmu, struct platform_device *pdev)
/* Map the memory resource. */
ret = sh_tmu_map_memory(tmu);
if (ret < 0) {
- dev_err(&tmu->pdev->dev, "failed to remap I/O memory\n");
+ pr_err("%s: failed to remap I/O memory\n", tmu->name);
goto err_clk_unprepare;
}
@@ -580,8 +578,6 @@ static int sh_tmu_setup(struct sh_tmu_device *tmu, struct platform_device *pdev)
goto err_unmap;
}
- platform_set_drvdata(pdev, tmu);
-
return 0;
err_unmap:
@@ -594,6 +590,39 @@ static int sh_tmu_setup(struct sh_tmu_device *tmu, struct platform_device *pdev)
return ret;
}
+static int sh_tmu_setup_pdev(struct sh_tmu_device *tmu, struct platform_device *pdev)
+{
+ int ret;
+
+ tmu->pdev = pdev;
+
+ raw_spin_lock_init(&tmu->lock);
+
+ if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
+ ret = sh_tmu_parse_dt(tmu);
+ if (ret < 0)
+ return ret;
+ } else if (pdev->dev.platform_data) {
+ const struct platform_device_id *id = pdev->id_entry;
+ struct sh_timer_config *cfg = pdev->dev.platform_data;
+
+ tmu->model = id->driver_data;
+ tmu->num_channels = hweight8(cfg->channels_mask);
+ } else {
+ dev_err(&tmu->pdev->dev, "missing platform data\n");
+ return -ENXIO;
+ }
+
+ tmu->name = dev_name(&pdev->dev);
+ tmu->clk = clk_get(&tmu->pdev->dev, "fck");
+ if (IS_ERR(tmu->clk)) {
+ dev_err(&tmu->pdev->dev, "cannot get clock\n");
+ return PTR_ERR(tmu->clk);
+ }
+
+ return sh_tmu_setup(tmu);
+}
+
static int sh_tmu_probe(struct platform_device *pdev)
{
struct sh_tmu_device *tmu = platform_get_drvdata(pdev);
@@ -613,12 +642,13 @@ static int sh_tmu_probe(struct platform_device *pdev)
if (tmu == NULL)
return -ENOMEM;
- ret = sh_tmu_setup(tmu, pdev);
+ ret = sh_tmu_setup_pdev(tmu, pdev);
if (ret) {
kfree(tmu);
pm_runtime_idle(&pdev->dev);
return ret;
}
+ platform_set_drvdata(pdev, tmu);
if (is_sh_early_platform_device(pdev))
return 0;
@@ -632,6 +662,45 @@ static int sh_tmu_probe(struct platform_device *pdev)
return 0;
}
+static int sh_tmu_setup_of(struct sh_tmu_device *tmu, struct device_node *np)
+{
+ int ret;
+
+ tmu->np = np;
+ raw_spin_lock_init(&tmu->lock);
+
+ ret = sh_tmu_parse_dt(tmu);
+ if (ret < 0)
+ return ret;
+
+ tmu->clk = of_clk_get(np, 0);
+ tmu->name = of_node_full_name(np);
+
+ if (IS_ERR(tmu->clk)) {
+ pr_err("%pOF: cannot get clock\n", np);
+ return PTR_ERR(tmu->clk);
+ }
+
+ return sh_tmu_setup(tmu);
+}
+
+static int __init sh_tmu_of_register(struct device_node *np)
+{
+ struct sh_tmu_device *tmu;
+ int ret;
+
+ tmu = kzalloc(sizeof(*tmu), GFP_KERNEL);
+ if (tmu == NULL)
+ return -ENOMEM;
+
+ ret = sh_tmu_setup_of(tmu, np);
+ if (ret) {
+ kfree(tmu);
+ pr_warn("%pOF: Timer register failed (%d)", np, ret);
+ }
+ return ret;
+}
+
static const struct platform_device_id sh_tmu_id_table[] = {
{ "sh-tmu", SH_TMU },
{ "sh-tmu-sh3", SH_TMU_SH3 },
@@ -665,6 +734,7 @@ static void __exit sh_tmu_exit(void)
platform_driver_unregister(&sh_tmu_device_driver);
}
+TIMER_OF_DECLARE(sh_tmu, "renesas,tmu", sh_tmu_of_register);
#ifdef CONFIG_SUPERH
sh_early_platform_init("earlytimer", &sh_tmu_device_driver);
#endif
--
2.39.2
^ permalink raw reply related
* [RESEND v7 09/37] dt-binding: Add compatible SH7750 SoC
From: Yoshinori Sato @ 2024-04-04 5:14 UTC (permalink / raw)
To: linux-sh
Cc: Yoshinori Sato, Damien Le Moal, Niklas Cassel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
Michael Turquette, Stephen Boyd, David Airlie, Daniel Vetter,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
Thomas Gleixner, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Greg Kroah-Hartman, Jiri Slaby,
Magnus Damm, Daniel Lezcano, Rich Felker,
John Paul Adrian Glaubitz, Lee Jones, Helge Deller,
Heiko Stuebner, Shawn Guo, Sebastian Reichel, Chris Morgan,
Linus Walleij, Arnd Bergmann, David Rientjes, Hyeonggon Yoo,
Vlastimil Babka, Baoquan He, Andrew Morton, Guenter Roeck,
Kefeng Wang, Stephen Rothwell, Javier Martinez Canillas, Guo Ren,
Azeem Shaikh, Max Filippov, Jonathan Corbet, Jacky Huang,
Herve Codina, Manikanta Guntupalli, Anup Patel, Biju Das,
Uwe Kleine-König, Sam Ravnborg, Sergey Shtylyov,
Laurent Pinchart, linux-ide, devicetree, linux-kernel,
linux-renesas-soc, linux-clk, dri-devel, linux-pci, linux-serial,
linux-fbdev
In-Reply-To: <cover.1712207606.git.ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
Documentation/devicetree/bindings/timer/renesas,tmu.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml
index 84bbe15028a1..265d286ffb2f 100644
--- a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml
+++ b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml
@@ -39,6 +39,7 @@ properties:
- renesas,tmu-r8a779a0 # R-Car V3U
- renesas,tmu-r8a779f0 # R-Car S4-8
- renesas,tmu-r8a779g0 # R-Car V4H
+ - renesas,tmu-sh7750 # SH7750
- const: renesas,tmu
reg:
@@ -96,6 +97,7 @@ if:
- renesas,tmu-r8a7740
- renesas,tmu-r8a7778
- renesas,tmu-r8a7779
+ - renesas,tmu-sh7750
then:
required:
- resets
--
2.39.2
^ permalink raw reply related
* [RESEND v7 10/37] sh: Common PCI Framework driver support.
From: Yoshinori Sato @ 2024-04-04 5:14 UTC (permalink / raw)
To: linux-sh
Cc: Yoshinori Sato, Damien Le Moal, Niklas Cassel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
Michael Turquette, Stephen Boyd, David Airlie, Daniel Vetter,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
Thomas Gleixner, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Greg Kroah-Hartman, Jiri Slaby,
Magnus Damm, Daniel Lezcano, Rich Felker,
John Paul Adrian Glaubitz, Lee Jones, Helge Deller,
Heiko Stuebner, Shawn Guo, Sebastian Reichel, Chris Morgan,
Linus Walleij, Arnd Bergmann, David Rientjes, Hyeonggon Yoo,
Vlastimil Babka, Baoquan He, Andrew Morton, Guenter Roeck,
Kefeng Wang, Stephen Rothwell, Javier Martinez Canillas, Guo Ren,
Azeem Shaikh, Max Filippov, Jonathan Corbet, Jacky Huang,
Herve Codina, Manikanta Guntupalli, Anup Patel, Biju Das,
Uwe Kleine-König, Sam Ravnborg, Sergey Shtylyov,
Laurent Pinchart, linux-ide, devicetree, linux-kernel,
linux-renesas-soc, linux-clk, dri-devel, linux-pci, linux-serial,
linux-fbdev
In-Reply-To: <cover.1712207606.git.ysato@users.sourceforge.jp>
Add New OF based PCI Host driver.
This driver conflicts some point in legacy PCI driver.
To resolve the conflict, I made some changes to the legacy driver.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/sh/include/asm/io.h | 6 ++++++
arch/sh/include/asm/pci.h | 4 ++++
arch/sh/kernel/iomap.c | 18 ++++++++++++++++++
3 files changed, 28 insertions(+)
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index 5c544cf5201b..29b5f996cde3 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -20,6 +20,7 @@
#include <asm/page.h>
#include <linux/pgtable.h>
#include <asm-generic/iomap.h>
+#include <linux/ioport.h>
#define __IO_PREFIX generic
#include <asm/io_generic.h>
@@ -310,4 +311,9 @@ unsigned long long poke_real_address_q(unsigned long long addr,
int valid_phys_addr_range(phys_addr_t addr, size_t size);
int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
+#if defined(CONFIG_PCI) && !defined(CONFIG_GENERIC_IOMAP)
+#define pci_remap_iospace pci_remap_iospace
+int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr);
+#endif
+
#endif /* __ASM_SH_IO_H */
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
index 54c30126ea17..92b3bd604319 100644
--- a/arch/sh/include/asm/pci.h
+++ b/arch/sh/include/asm/pci.h
@@ -2,6 +2,7 @@
#ifndef __ASM_SH_PCI_H
#define __ASM_SH_PCI_H
+#ifndef CONFIG_SH_DEVICE_TREE
/* Can be used to override the logic in pci_scan_bus for skipping
already-configured bus numbers - to be used for buggy BIOSes
or architectures with incomplete PCI setup by the loader */
@@ -88,4 +89,7 @@ static inline int pci_proc_domain(struct pci_bus *bus)
return hose->need_domain_info;
}
+#else /* CONFIG_SH_DEVICE_TREE */
+#include <asm-generic/pci.h>
+#endif
#endif /* __ASM_SH_PCI_H */
diff --git a/arch/sh/kernel/iomap.c b/arch/sh/kernel/iomap.c
index 0a0dff4e66de..d1b8e496ca23 100644
--- a/arch/sh/kernel/iomap.c
+++ b/arch/sh/kernel/iomap.c
@@ -160,3 +160,21 @@ void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
mmio_outsl(addr, src, count);
}
EXPORT_SYMBOL(iowrite32_rep);
+
+#if defined(pci_remap_iospace)
+int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
+{
+ unsigned long vaddr = res->start;
+
+ if (!(res->flags & IORESOURCE_IO))
+ return -EINVAL;
+
+ if (res->end > IO_SPACE_LIMIT)
+ return -EINVAL;
+
+ __set_io_port_base(phys_addr);
+ return vmap_page_range(vaddr, vaddr + resource_size(res), phys_addr,
+ pgprot_device(PAGE_KERNEL));
+}
+EXPORT_SYMBOL(pci_remap_iospace);
+#endif
--
2.39.2
^ permalink raw reply related
* [RESEND v7 11/37] pci: pci-sh7751: Add SH7751 PCI driver
From: Yoshinori Sato @ 2024-04-04 5:14 UTC (permalink / raw)
To: linux-sh
Cc: Yoshinori Sato, Damien Le Moal, Niklas Cassel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
Michael Turquette, Stephen Boyd, David Airlie, Daniel Vetter,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
Thomas Gleixner, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Greg Kroah-Hartman, Jiri Slaby,
Magnus Damm, Daniel Lezcano, Rich Felker,
John Paul Adrian Glaubitz, Lee Jones, Helge Deller,
Heiko Stuebner, Shawn Guo, Sebastian Reichel, Chris Morgan,
Linus Walleij, Arnd Bergmann, David Rientjes, Hyeonggon Yoo,
Vlastimil Babka, Baoquan He, Andrew Morton, Guenter Roeck,
Kefeng Wang, Stephen Rothwell, Javier Martinez Canillas, Guo Ren,
Azeem Shaikh, Max Filippov, Jonathan Corbet, Jacky Huang,
Herve Codina, Manikanta Guntupalli, Anup Patel, Biju Das,
Uwe Kleine-König, Sam Ravnborg, Sergey Shtylyov,
Laurent Pinchart, linux-ide, devicetree, linux-kernel,
linux-renesas-soc, linux-clk, dri-devel, linux-pci, linux-serial,
linux-fbdev
In-Reply-To: <cover.1712207606.git.ysato@users.sourceforge.jp>
Renesas SH7751 CPU Internal PCI Controller driver.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
drivers/pci/controller/Kconfig | 9 +
drivers/pci/controller/Makefile | 1 +
drivers/pci/controller/pci-sh7751.c | 342 ++++++++++++++++++++++++++++
3 files changed, 352 insertions(+)
create mode 100644 drivers/pci/controller/pci-sh7751.c
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index e534c02ee34f..a2fd917a2e03 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -353,6 +353,15 @@ config PCIE_XILINX_CPM
Say 'Y' here if you want kernel support for the
Xilinx Versal CPM host bridge.
+config PCI_SH7751
+ bool "Renesas SH7751 PCI controller"
+ depends on OF
+ depends on CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R || COMPILE_TEST
+ select PCI_HOST_COMMON
+ help
+ Say 'Y' here if you want kernel to support the Renesas SH7751 PCI
+ Host Bridge driver.
+
source "drivers/pci/controller/cadence/Kconfig"
source "drivers/pci/controller/dwc/Kconfig"
source "drivers/pci/controller/mobiveil/Kconfig"
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index f2b19e6174af..aa97e5d74e58 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o
obj-$(CONFIG_PCIE_HISI_ERR) += pcie-hisi-error.o
obj-$(CONFIG_PCIE_APPLE) += pcie-apple.o
obj-$(CONFIG_PCIE_MT7621) += pcie-mt7621.o
+obj-$(CONFIG_PCI_SH7751) += pci-sh7751.o
# pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
obj-y += dwc/
diff --git a/drivers/pci/controller/pci-sh7751.c b/drivers/pci/controller/pci-sh7751.c
new file mode 100644
index 000000000000..a5340689f737
--- /dev/null
+++ b/drivers/pci/controller/pci-sh7751.c
@@ -0,0 +1,342 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SH7751 PCI driver
+ * Copyright (C) 2023 Yoshinori Sato
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
+#include <linux/pci-ecam.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/dma-direct.h>
+#include <asm/addrspace.h>
+
+/* PCICR and PCICLKCR write enable magic key */
+#define PCIC_WE_KEY (0xa5 << 24)
+
+/* PCIC registers */
+/* 0x0000 - 0x00ff mapped to PCI device configuration space */
+#define PCIC_PCICR 0x100 /* PCI Control Register */
+#define PCIC_PCICR_TRSB BIT(9) /* Target Read Single */
+#define PCIC_PCICR_BSWP BIT(8) /* Target Byte Swap */
+#define PCIC_PCICR_PLUP BIT(7) /* Enable PCI Pullup */
+#define PCIC_PCICR_ARBM BIT(6) /* PCI Arbitration Mode */
+#define PCIC_PCICR_MD10 BIT(5) /* MD10 status */
+#define PCIC_PCICR_MD9 BIT(4) /* MD9 status */
+#define PCIC_PCICR_SERR BIT(3) /* SERR output assert */
+#define PCIC_PCICR_INTA BIT(2) /* INTA output assert */
+#define PCIC_PCICR_PRST BIT(1) /* PCI Reset Assert */
+#define PCIC_PCICR_CFIN BIT(0) /* Central Fun. Init Done */
+
+#define PCIC_PCILSR0 0x104 /* PCI Local Space Register0 */
+#define PCIC_PCILSR1 0x108 /* PCI Local Space Register1 */
+#define PCIC_PCILAR0 0x10c /* PCI Local Addr Register1 */
+#define PCIC_PCILAR1 0x110 /* PCI Local Addr Register1 */
+#define PCIC_PCIINT 0x114 /* PCI Interrupt Register */
+#define PCIC_PCIINTM 0x118 /* PCI Interrupt Mask */
+#define PCIC_PCIALR 0x11c /* Error Address Register */
+#define PCIC_PCICLR 0x120 /* Error Command/Data */
+#define PCIC_PCIAINT 0x130 /* Arbiter Interrupt Register */
+#define PCIC_PCIAINTM 0x134 /* Arbiter Int. Mask Register */
+#define PCIC_PCIBMLR 0x138 /* Error Bus Master Register */
+#define PCIC_PCIDMABT 0x140 /* DMA Transfer Arb. Register */
+#define PCIC_PCIPAR 0x1c0 /* PIO Address Register */
+#define PCIC_PCIMBR 0x1c4 /* Memory Base Address */
+#define PCIC_PCIIOBR 0x1c8 /* I/O Base Address Register */
+
+#define PCIC_PCIPINT 0x1cc /* Power Mgmnt Int. Register */
+#define PCIC_PCIPINT_D3 BIT(1) /* D3 Pwr Mgmt. Interrupt */
+#define PCIC_PCIPINT_D0 BIT(0) /* D0 Pwr Mgmt. Interrupt */
+
+#define PCIC_PCIPINTM 0x1d0 /* Power Mgmnt Mask Register */
+#define PCIC_PCICLKR 0x1d4 /* Clock Ctrl. Register */
+#define PCIC_PCIBCR1 0x1e0 /* Memory BCR1 Register */
+#define PCIC_PCIBCR2 0x1e4 /* Memory BCR2 Register */
+#define PCIC_PCIWCR1 0x1e8 /* Wait Control 1 Register */
+#define PCIC_PCIWCR2 0x1ec /* Wait Control 2 Register */
+#define PCIC_PCIWCR3 0x1f0 /* Wait Control 3 Register */
+#define PCIC_PCIMCR 0x1f4 /* Memory Control Register */
+#define PCIC_PCIBCR3 0x1f8 /* Memory BCR3 Register */
+#define PCIC_PCIPDR 0x220 /* Port IO Data Register */
+
+/* PCI IDs */
+/* Hitachi is the company that led to Renesas. */
+/* The SH7751 was designed by Hitachi, so it has a Hitachi ID. */
+#define PCI_VENDOR_ID_HITACHI 0x1054
+#define PCI_DEVICE_ID_SH7751 0x3505
+#define PCI_DEVICE_ID_SH7751R 0x350e
+
+/* BSC registers */
+/* Copy BSC setting to PCI BSC */
+#define BSC_BCR1 0x0000
+#define BSC_BCR1_SLAVE BIT(30)
+#define BSC_BCR1_BRQEN BIT(19)
+#define BSC_BCR2 0x0004
+#define BSC_BCR3 0x0050
+#define BSC_WCR1 0x0008
+#define BSC_WCR2 0x000c
+#define BSC_WCR3 0x0010
+#define BSC_MCR 0x0014
+#define BSC_MCR_MRSET BIT(30)
+#define BSC_MCR_RFSH BIT(2)
+
+/* PCIC access wrapper */
+#define pcic_writel(val, base, reg) writel(val, base + (reg))
+#define pcic_readl(base, reg) readl(base + (reg))
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ */
+#define IO_REGION_BASE 0x1000
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ resource_size_t start = res->start;
+
+ if (res->flags & IORESOURCE_IO) {
+ if (start < PCIBIOS_MIN_IO + IO_REGION_BASE)
+ start = PCIBIOS_MIN_IO + IO_REGION_BASE;
+
+ /*
+ * Put everything into 0x00-0xff region modulo 0x400.
+ */
+ if (start & 0x300)
+ start = (start + 0x3ff) & ~0x3ff;
+ }
+
+ return start;
+}
+
+static int setup_pci_bsc(struct device *dev, void __iomem *pcic,
+ void __iomem *bsc, unsigned int area, bool bcr3)
+{
+ u32 word;
+
+ word = __raw_readl(bsc + BSC_BCR1);
+ /* check BCR for SDRAM in area */
+ if (((word >> area) & 1) == 0) {
+ dev_err(dev, "Area %u is not configured for SDRAM. BCR1=0x%x\n",
+ area, word);
+ return -EINVAL;
+ }
+ word |= BSC_BCR1_SLAVE; /* PCIC BSC is slave only */
+ pcic_writel(word, pcic, PCIC_PCIBCR1);
+
+ word = __raw_readw(bsc + BSC_BCR2);
+ /* check BCR2 for 32bit SDRAM interface*/
+ if (((word >> (area << 1)) & 0x3) != 0x3) {
+ dev_err(dev, "Area %u is not 32 bit SDRAM. BCR2=0x%x\n",
+ area, word);
+ return -EINVAL;
+ }
+ pcic_writel(word, pcic, PCIC_PCIBCR2);
+
+ if (bcr3) {
+ /* BCR3 have only SH7751R */
+ word = __raw_readw(bsc + BSC_BCR3);
+ pcic_writel(word, pcic, PCIC_PCIBCR3);
+ }
+
+ /* configure the wait control registers */
+ word = __raw_readl(bsc + BSC_WCR1);
+ pcic_writel(word, pcic, PCIC_PCIWCR1);
+ word = __raw_readl(bsc + BSC_WCR2);
+ pcic_writel(word, pcic, PCIC_PCIWCR2);
+ word = __raw_readl(bsc + BSC_WCR3);
+ pcic_writel(word, pcic, PCIC_PCIWCR3);
+ word = __raw_readl(bsc + BSC_MCR);
+ /* Clear MRSET and RFSH bit */
+ word &= ~(BSC_MCR_MRSET | BSC_MCR_RFSH);
+ pcic_writel(word, pcic, PCIC_PCIMCR);
+
+ return 0;
+}
+
+#define NUM_AREA 7
+static int set_pci_ranges(struct device *dev,
+ void __iomem *pcic, void __iomem *bsc, bool bcr3)
+{
+ struct resource_entry *dma, *tmp;
+ struct pci_host_bridge *bridge;
+ u32 bsc_done[NUM_AREA];
+ unsigned int la;
+
+ bridge = dev_get_drvdata(dev);
+ pcic_writel(0, pcic, PCIC_PCILAR0);
+ pcic_writel(0, pcic, PCIC_PCILAR1);
+ la = 0;
+ memset(&bsc_done, 0, sizeof(bsc_done));
+ resource_list_for_each_entry_safe(dma, tmp, &bridge->dma_ranges) {
+ struct resource *res = dma->res;
+ unsigned int area;
+ u32 word;
+
+ switch (resource_type(res)) {
+ case IORESOURCE_IO:
+ /* BAR0 is I/O space */
+ word = res->start | 1;
+ pcic_writel(word, pcic, PCI_BASE_ADDRESS_0);
+ word = pcic_readl(pcic, PCI_COMMAND);
+ word |= PCI_COMMAND_IO;
+ pcic_writel(word, pcic, PCI_COMMAND);
+ break;
+ case IORESOURCE_MEM:
+ if (la > 4) {
+ dev_err(dev, "Invalid range definition.\n");
+ return -EINVAL;
+ }
+ area = (res->start >> 26) & 0x07;
+ word = res->end - res->start;
+ if (area >= NUM_AREA) {
+ /* Area 7 is reserved. */
+ dev_info(dev, "Invalid local address 0x%08x. Ignore it.\n",
+ res->start);
+ break;
+ }
+ pcic_writel(res->start, pcic, PCI_BASE_ADDRESS_1 + la);
+ /* if dummy entry, skip BSC setup */
+ if (word < 4)
+ break;
+ /* BAR1 is local area 0, BAR2 is local area 1 */
+ pcic_writel(word, pcic, PCIC_PCILSR0 + la);
+ word = P2SEGADDR(res->start);
+ pcic_writel(word, pcic, PCIC_PCILAR0 + la);
+ la += 4;
+ if (!bsc_done[area]) {
+ /* check BCR for SDRAM in specified area. And setup PCI BSC. */
+ if (setup_pci_bsc(dev, pcic, bsc, area, bcr3))
+ return -EINVAL;
+ bsc_done[area] = 1;
+ }
+ break;
+ }
+ }
+ return 0;
+}
+
+static int sh7751_pci_probe(struct platform_device *pdev)
+{
+ struct resource *res, *bscres;
+ void __iomem *pcic;
+ void __iomem *bsc;
+ u16 vid, did;
+ u32 word;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (IS_ERR(res))
+ return PTR_ERR(res);
+ pcic = ioremap(res->start, res->end - res->start + 1);
+
+ bscres = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ bsc = devm_ioremap_resource(&pdev->dev, bscres);
+ if (IS_ERR(bsc))
+ return PTR_ERR(bsc);
+
+ /* check for SH7751/SH7751R hardware */
+ word = pcic_readl(pcic, PCI_VENDOR_ID);
+ vid = word & 0xffff;
+ did = word >> 16;
+ if ((vid != PCI_VENDOR_ID_HITACHI) ||
+ ((did != PCI_DEVICE_ID_SH7751) &&
+ (did != PCI_DEVICE_ID_SH7751R))) {
+ dev_err(&pdev->dev, "This is not an SH7751(R)\n");
+ return -ENODEV;
+ }
+ dev_info(&pdev->dev, "PCI core found at %pR\n", res);
+
+ /* Set the BCR's to enable PCI access */
+ word = __raw_readl(bsc + BSC_BCR1);
+ word |= BSC_BCR1_BRQEN;
+ __raw_writel(word, bsc + BSC_BCR1);
+
+ /* Turn the clocks back on (not done in reset)*/
+ pcic_writel(PCIC_WE_KEY | 0, pcic, PCIC_PCICLKR);
+ /* Clear Powerdown IRQ's (not done in reset) */
+ word = PCIC_PCIPINT_D3 | PCIC_PCIPINT_D0;
+ pcic_writel(word, pcic, PCIC_PCIPINT);
+
+ /* set the command/status */
+ word = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+ PCI_COMMAND_PARITY | PCI_COMMAND_WAIT;
+ pcic_writel(word, pcic, PCI_COMMAND);
+
+ /* define this host as the host bridge */
+ word = PCI_BASE_CLASS_BRIDGE << 24;
+ pcic_writel(word, pcic, PCI_CLASS_REVISION);
+
+ ret = pci_host_common_probe(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Initialize failed (%d)\n", ret);
+ return ret;
+ }
+
+ /* Set IO and Mem windows to local address */
+ if (set_pci_ranges(&pdev->dev, pcic, bsc,
+ did == PCI_DEVICE_ID_SH7751R))
+ return -EINVAL;
+ pcic_writel(0, pcic, PCIC_PCIIOBR);
+
+ if (of_property_read_bool(pdev->dev.of_node, "renesas,bus-arbit-round-robin"))
+ word |= BIT(0);
+ else
+ word = 0;
+ pcic_writel(word, pcic, PCIC_PCIDMABT);
+
+ /* SH7751 init done, set central function init complete */
+ /* use round robin mode to stop a device starving/overrunning */
+ word = PCIC_PCICR_CFIN | PCIC_PCICR_ARBM;
+ pcic_writel(PCIC_WE_KEY | word, pcic, PCIC_PCICR);
+
+ return 0;
+}
+
+/*
+ * Direct access to PCI hardware...
+ */
+#define CONFIG_CMD(bus, devfn, where) \
+ (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
+
+static void __iomem *sh4_pci_map_bus(struct pci_bus *bus,
+ unsigned int devfn, int where)
+{
+ struct pci_config_window *cfg = bus->sysdata;
+ void __iomem *pcic = (void __iomem *)cfg->res.start;
+
+ pcic_writel(CONFIG_CMD(bus, devfn, where), pcic, PCIC_PCIPAR);
+ return pcic + PCIC_PCIPDR;
+}
+
+static const struct pci_ecam_ops pci_sh7751_bus_ops = {
+ .pci_ops = {
+ .map_bus = sh4_pci_map_bus,
+ .read = pci_generic_config_read32,
+ .write = pci_generic_config_write32,
+ }
+};
+
+static const struct of_device_id sh7751_pci_of_match[] = {
+ { .compatible = "renesas,sh7751-pci",
+ .data = &pci_sh7751_bus_ops },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sh7751_pci_of_match);
+
+static struct platform_driver sh7751_pci_driver = {
+ .driver = {
+ .name = "sh7751-pci",
+ .of_match_table = sh7751_pci_of_match,
+ },
+ .probe = sh7751_pci_probe,
+};
+module_platform_driver(sh7751_pci_driver);
+
+MODULE_DESCRIPTION("SH7751 PCI driver");
--
2.39.2
^ permalink raw reply related
* [RESEND v7 12/37] dt-bindings: pci: pci-sh7751: Add SH7751 PCI
From: Yoshinori Sato @ 2024-04-04 5:14 UTC (permalink / raw)
To: linux-sh
Cc: Yoshinori Sato, Damien Le Moal, Niklas Cassel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
Michael Turquette, Stephen Boyd, David Airlie, Daniel Vetter,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
Thomas Gleixner, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Greg Kroah-Hartman, Jiri Slaby,
Magnus Damm, Daniel Lezcano, Rich Felker,
John Paul Adrian Glaubitz, Lee Jones, Helge Deller,
Heiko Stuebner, Shawn Guo, Sebastian Reichel, Chris Morgan,
Linus Walleij, Arnd Bergmann, David Rientjes, Hyeonggon Yoo,
Vlastimil Babka, Baoquan He, Andrew Morton, Guenter Roeck,
Kefeng Wang, Stephen Rothwell, Javier Martinez Canillas, Guo Ren,
Azeem Shaikh, Max Filippov, Jonathan Corbet, Jacky Huang,
Herve Codina, Manikanta Guntupalli, Anup Patel, Biju Das,
Uwe Kleine-König, Sam Ravnborg, Sergey Shtylyov,
Laurent Pinchart, linux-ide, devicetree, linux-kernel,
linux-renesas-soc, linux-clk, dri-devel, linux-pci, linux-serial,
linux-fbdev
In-Reply-To: <cover.1712207606.git.ysato@users.sourceforge.jp>
Renesas SH7751 PCI Controller json-schema.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
.../bindings/pci/renesas,sh7751-pci.yaml | 89 +++++++++++++++++++
1 file changed, 89 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/renesas,sh7751-pci.yaml
diff --git a/Documentation/devicetree/bindings/pci/renesas,sh7751-pci.yaml b/Documentation/devicetree/bindings/pci/renesas,sh7751-pci.yaml
new file mode 100644
index 000000000000..115c2bb67339
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/renesas,sh7751-pci.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/renesas,sh7751-pci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas SH7751 PCI Host controller
+
+maintainers:
+ - Yoshinori Sato <ysato@users.sourceforge.jp>
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ compatible:
+ const: renesas,sh7751-pci
+
+ reg:
+ minItems: 2
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: PCI Controller
+ - const: Bus State Controller
+
+ "#interrupt-cells":
+ const: 1
+
+ "#address-cells":
+ const: 3
+
+ "#size-cells":
+ const: 2
+
+ ranges: true
+
+ dma-ranges: true
+
+ interrupt-controller: true
+
+ renesas,bus-arbit-round-robin:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ Set DMA bus arbitration to round robin.
+
+required:
+ - compatible
+ - reg
+ - "#interrupt-cells"
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+ - interrupt-map
+ - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pci@fe200000 {
+ compatible = "renesas,sh7751-pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ device_type = "pci";
+ bus-range = <0 0>;
+ ranges = <0x02000000 0 0xfd000000 0xfd000000 0 0x01000000>,
+ <0x01000000 0 0x00000000 0xfe240000 0 0x00040000>;
+ dma-ranges = <0x02000000 0 0xc000000 0x0c000000 0 0x04000000>;
+ reg = <0xfe200000 0x0400>,
+ <0xff800000 0x0100>;
+ interrupt-map = <0x0000 0 0 1 &julianintc 5 IRQ_TYPE_LEVEL_LOW>,
+ <0x0000 0 0 2 &julianintc 6 IRQ_TYPE_LEVEL_LOW>,
+ <0x0000 0 0 3 &julianintc 7 IRQ_TYPE_LEVEL_LOW>,
+ <0x0000 0 0 4 &julianintc 8 IRQ_TYPE_LEVEL_LOW>,
+ <0x0800 0 0 1 &julianintc 6 IRQ_TYPE_LEVEL_LOW>,
+ <0x0800 0 0 2 &julianintc 7 IRQ_TYPE_LEVEL_LOW>,
+ <0x0800 0 0 3 &julianintc 8 IRQ_TYPE_LEVEL_LOW>,
+ <0x0800 0 0 4 &julianintc 5 IRQ_TYPE_LEVEL_LOW>,
+ <0x1000 0 0 1 &julianintc 7 IRQ_TYPE_LEVEL_LOW>,
+ <0x1000 0 0 2 &julianintc 8 IRQ_TYPE_LEVEL_LOW>,
+ <0x1000 0 0 3 &julianintc 5 IRQ_TYPE_LEVEL_LOW>,
+ <0x1000 0 0 4 &julianintc 6 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-map-mask = <0x1800 0 0 7>;
+ };
--
2.39.2
^ permalink raw reply related
* [RESEND v7 13/37] dt-bindings: clock: sh7750-cpg: Add renesas,sh7750-cpg header.
From: Yoshinori Sato @ 2024-04-04 5:14 UTC (permalink / raw)
To: linux-sh
Cc: Yoshinori Sato, Damien Le Moal, Niklas Cassel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
Michael Turquette, Stephen Boyd, David Airlie, Daniel Vetter,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
Thomas Gleixner, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Greg Kroah-Hartman, Jiri Slaby,
Magnus Damm, Daniel Lezcano, Rich Felker,
John Paul Adrian Glaubitz, Lee Jones, Helge Deller,
Heiko Stuebner, Shawn Guo, Sebastian Reichel, Chris Morgan,
Linus Walleij, Arnd Bergmann, David Rientjes, Hyeonggon Yoo,
Vlastimil Babka, Baoquan He, Andrew Morton, Guenter Roeck,
Kefeng Wang, Stephen Rothwell, Javier Martinez Canillas, Guo Ren,
Azeem Shaikh, Max Filippov, Jonathan Corbet, Jacky Huang,
Herve Codina, Manikanta Guntupalli, Anup Patel, Biju Das,
Uwe Kleine-König, Sam Ravnborg, Sergey Shtylyov,
Laurent Pinchart, linux-ide, devicetree, linux-kernel,
linux-renesas-soc, linux-clk, dri-devel, linux-pci, linux-serial,
linux-fbdev
In-Reply-To: <cover.1712207606.git.ysato@users.sourceforge.jp>
SH7750 CPG Clock output define.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
.../bindings/clock/renesas,sh7750-cpg.yaml | 105 ++++++++++++++++++
include/dt-bindings/clock/sh7750-cpg.h | 26 +++++
2 files changed, 131 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/renesas,sh7750-cpg.yaml
create mode 100644 include/dt-bindings/clock/sh7750-cpg.h
diff --git a/Documentation/devicetree/bindings/clock/renesas,sh7750-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,sh7750-cpg.yaml
new file mode 100644
index 000000000000..04c10b0834ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,sh7750-cpg.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,sh7750-cpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas SH7750/7751 Clock Pulse Generator (CPG)
+
+maintainers:
+ - Yoshinori Sato <ysato@users.sourceforge.jp>
+
+description:
+ The Clock Pulse Generator (CPG) generates core clocks for the SoC. It
+ includes PLLs, and variable ratio dividers.
+
+ The CPG may also provide a Clock Domain for SoC devices, in combination with
+ the CPG Module Stop (MSTP) Clocks.
+
+properties:
+ compatible:
+ enum:
+ - renesas,sh7750-cpg # SH7750
+ - renesas,sh7750s-cpg # SH775S
+ - renesas,sh7750r-cpg # SH7750R
+ - renesas,sh7751-cpg # SH7751
+ - renesas,sh7751r-cpg # SH7751R
+
+ reg: true
+
+ reg-names: true
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: extal
+
+ '#clock-cells':
+ const: 1
+
+ renesas,mode:
+ description: Board-specific settings of the MD[0-2] pins on SoC
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 6
+
+ '#power-domain-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - '#clock-cells'
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,sh7750-cpg
+ - renesas,sh7750s-cpg
+ then:
+ properties:
+ reg:
+ maxItems: 1
+ reg-names:
+ items:
+ - const: FRQCR
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,sh7750r-cpg
+ - renesas,sh7751-cpg
+ - renesas,sh7751r-cpg
+ then:
+ properties:
+ reg:
+ maxItems: 2
+ reg-names:
+ items:
+ - const: FRQCR
+ - const: CLKSTP00
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sh7750-cpg.h>
+ cpg: clock-controller@ffc00000 {
+ #clock-cells = <1>;
+ #power-domain-cells = <0>;
+ compatible = "renesas,sh7751r-cpg";
+ clocks = <&extal>;
+ clock-names = "extal";
+ reg = <0xffc00000 20>, <0xfe0a0000 16>;
+ reg-names = "FRQCR", "CLKSTP00";
+ renesas,mode = <0>;
+ };
diff --git a/include/dt-bindings/clock/sh7750-cpg.h b/include/dt-bindings/clock/sh7750-cpg.h
new file mode 100644
index 000000000000..ec267be91adf
--- /dev/null
+++ b/include/dt-bindings/clock/sh7750-cpg.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+ *
+ * Copyright 2023 Yoshinori Sato
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_SH7750_H__
+#define __DT_BINDINGS_CLOCK_SH7750_H__
+
+#define SH7750_CPG_PLLOUT 0
+
+#define SH7750_CPG_PCK 1
+#define SH7750_CPG_BCK 2
+#define SH7750_CPG_ICK 3
+
+#define SH7750_MSTP_SCI 4
+#define SH7750_MSTP_RTC 5
+#define SH7750_MSTP_TMU012 6
+#define SH7750_MSTP_SCIF 7
+#define SH7750_MSTP_DMAC 8
+#define SH7750_MSTP_UBC 9
+#define SH7750_MSTP_SQ 10
+#define SH7750_CSTP_INTC 11
+#define SH7750_CSTP_TMU34 12
+#define SH7750_CSTP_PCIC 13
+
+#endif
--
2.39.2
^ permalink raw reply related
* [RESEND v7 14/37] clk: Compatible with narrow registers
From: Yoshinori Sato @ 2024-04-04 5:14 UTC (permalink / raw)
To: linux-sh
Cc: Yoshinori Sato, Damien Le Moal, Niklas Cassel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
Michael Turquette, Stephen Boyd, David Airlie, Daniel Vetter,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
Thomas Gleixner, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Greg Kroah-Hartman, Jiri Slaby,
Magnus Damm, Daniel Lezcano, Rich Felker,
John Paul Adrian Glaubitz, Lee Jones, Helge Deller,
Heiko Stuebner, Shawn Guo, Sebastian Reichel, Chris Morgan,
Linus Walleij, Arnd Bergmann, David Rientjes, Hyeonggon Yoo,
Vlastimil Babka, Baoquan He, Andrew Morton, Guenter Roeck,
Kefeng Wang, Stephen Rothwell, Javier Martinez Canillas, Guo Ren,
Azeem Shaikh, Max Filippov, Jonathan Corbet, Jacky Huang,
Herve Codina, Manikanta Guntupalli, Anup Patel, Biju Das,
Uwe Kleine-König, Sam Ravnborg, Sergey Shtylyov,
Laurent Pinchart, linux-ide, devicetree, linux-kernel,
linux-renesas-soc, linux-clk, dri-devel, linux-pci, linux-serial,
linux-fbdev
In-Reply-To: <cover.1712207606.git.ysato@users.sourceforge.jp>
divider and gate only support 32-bit registers.
Older hardware uses narrower registers, so I want to be able to handle
8-bit and 16-bit wide registers.
Seven clk_divider flags are used, and if I add flags for 8bit access and
16bit access, 8bit will not be enough, so I expanded it to u16.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
drivers/clk/clk-divider.c | 56 +++++++++++++++++++++-----------
drivers/clk/clk-gate.c | 62 ++++++++++++++++++++++++++++--------
include/linux/clk-provider.h | 22 ++++++++++---
3 files changed, 103 insertions(+), 37 deletions(-)
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index a2c2b5203b0a..a1b5187cd63d 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -26,20 +26,38 @@
* parent - fixed parent. No clk_set_parent support
*/
-static inline u32 clk_div_readl(struct clk_divider *divider)
-{
- if (divider->flags & CLK_DIVIDER_BIG_ENDIAN)
- return ioread32be(divider->reg);
-
- return readl(divider->reg);
+static inline u32 clk_div_read(struct clk_divider *divider)
+{
+ if (divider->flags & CLK_DIVIDER_REG_8BIT)
+ return readb(divider->reg);
+ else if (divider->flags & CLK_DIVIDER_REG_16BIT) {
+ if (divider->flags & CLK_DIVIDER_BIG_ENDIAN)
+ return ioread16be(divider->reg);
+ else
+ return readw(divider->reg);
+ } else {
+ if (divider->flags & CLK_DIVIDER_BIG_ENDIAN)
+ return ioread32be(divider->reg);
+ else
+ return readl(divider->reg);
+ }
}
-static inline void clk_div_writel(struct clk_divider *divider, u32 val)
+static inline void clk_div_write(struct clk_divider *divider, u32 val)
{
- if (divider->flags & CLK_DIVIDER_BIG_ENDIAN)
- iowrite32be(val, divider->reg);
- else
- writel(val, divider->reg);
+ if (divider->flags & CLK_DIVIDER_REG_8BIT)
+ writeb(val, divider->reg);
+ else if (divider->flags & CLK_DIVIDER_REG_16BIT) {
+ if (divider->flags & CLK_DIVIDER_BIG_ENDIAN)
+ iowrite16be(val, divider->reg);
+ else
+ writew(val, divider->reg);
+ } else {
+ if (divider->flags & CLK_DIVIDER_BIG_ENDIAN)
+ iowrite32be(val, divider->reg);
+ else
+ writel(val, divider->reg);
+ }
}
static unsigned int _get_table_maxdiv(const struct clk_div_table *table,
@@ -152,7 +170,7 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
struct clk_divider *divider = to_clk_divider(hw);
unsigned int val;
- val = clk_div_readl(divider) >> divider->shift;
+ val = clk_div_read(divider) >> divider->shift;
val &= clk_div_mask(divider->width);
return divider_recalc_rate(hw, parent_rate, val, divider->table,
@@ -434,7 +452,7 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
if (divider->flags & CLK_DIVIDER_READ_ONLY) {
u32 val;
- val = clk_div_readl(divider) >> divider->shift;
+ val = clk_div_read(divider) >> divider->shift;
val &= clk_div_mask(divider->width);
return divider_ro_round_rate(hw, rate, prate, divider->table,
@@ -455,7 +473,7 @@ static int clk_divider_determine_rate(struct clk_hw *hw,
if (divider->flags & CLK_DIVIDER_READ_ONLY) {
u32 val;
- val = clk_div_readl(divider) >> divider->shift;
+ val = clk_div_read(divider) >> divider->shift;
val &= clk_div_mask(divider->width);
return divider_ro_determine_rate(hw, req, divider->table,
@@ -505,11 +523,11 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
if (divider->flags & CLK_DIVIDER_HIWORD_MASK) {
val = clk_div_mask(divider->width) << (divider->shift + 16);
} else {
- val = clk_div_readl(divider);
+ val = clk_div_read(divider);
val &= ~(clk_div_mask(divider->width) << divider->shift);
}
val |= (u32)value << divider->shift;
- clk_div_writel(divider, val);
+ clk_div_write(divider, val);
if (divider->lock)
spin_unlock_irqrestore(divider->lock, flags);
@@ -538,7 +556,7 @@ struct clk_hw *__clk_hw_register_divider(struct device *dev,
struct device_node *np, const char *name,
const char *parent_name, const struct clk_hw *parent_hw,
const struct clk_parent_data *parent_data, unsigned long flags,
- void __iomem *reg, u8 shift, u8 width, u8 clk_divider_flags,
+ void __iomem *reg, u8 shift, u8 width, u32 clk_divider_flags,
const struct clk_div_table *table, spinlock_t *lock)
{
struct clk_divider *div;
@@ -610,7 +628,7 @@ EXPORT_SYMBOL_GPL(__clk_hw_register_divider);
struct clk *clk_register_divider_table(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
- u8 clk_divider_flags, const struct clk_div_table *table,
+ u32 clk_divider_flags, const struct clk_div_table *table,
spinlock_t *lock)
{
struct clk_hw *hw;
@@ -664,7 +682,7 @@ struct clk_hw *__devm_clk_hw_register_divider(struct device *dev,
struct device_node *np, const char *name,
const char *parent_name, const struct clk_hw *parent_hw,
const struct clk_parent_data *parent_data, unsigned long flags,
- void __iomem *reg, u8 shift, u8 width, u8 clk_divider_flags,
+ void __iomem *reg, u8 shift, u8 width, u32 clk_divider_flags,
const struct clk_div_table *table, spinlock_t *lock)
{
struct clk_hw **ptr, *hw;
diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index 68e585a02fd9..65191f9684ff 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -24,20 +24,38 @@
* parent - fixed parent. No clk_set_parent support
*/
-static inline u32 clk_gate_readl(struct clk_gate *gate)
+static inline u32 clk_gate_read(struct clk_gate *gate)
{
- if (gate->flags & CLK_GATE_BIG_ENDIAN)
- return ioread32be(gate->reg);
-
- return readl(gate->reg);
+ if (gate->flags & CLK_GATE_REG_8BIT)
+ return readb(gate->reg);
+ else if (gate->flags & CLK_GATE_REG_16BIT) {
+ if (gate->flags & CLK_GATE_BIG_ENDIAN)
+ return ioread16be(gate->reg);
+ else
+ return readw(gate->reg);
+ } else {
+ if (gate->flags & CLK_GATE_BIG_ENDIAN)
+ return ioread32be(gate->reg);
+ else
+ return readl(gate->reg);
+ }
}
-static inline void clk_gate_writel(struct clk_gate *gate, u32 val)
+static inline void clk_gate_write(struct clk_gate *gate, u32 val)
{
- if (gate->flags & CLK_GATE_BIG_ENDIAN)
- iowrite32be(val, gate->reg);
- else
- writel(val, gate->reg);
+ if (gate->flags & CLK_GATE_REG_8BIT)
+ writeb(val, gate->reg);
+ else if (gate->flags & CLK_GATE_REG_16BIT) {
+ if (gate->flags & CLK_GATE_BIG_ENDIAN)
+ iowrite16be(val, gate->reg);
+ else
+ writew(val, gate->reg);
+ } else {
+ if (gate->flags & CLK_GATE_BIG_ENDIAN)
+ iowrite32be(val, gate->reg);
+ else
+ writel(val, gate->reg);
+ }
}
/*
@@ -72,7 +90,7 @@ static void clk_gate_endisable(struct clk_hw *hw, int enable)
if (set)
reg |= BIT(gate->bit_idx);
} else {
- reg = clk_gate_readl(gate);
+ reg = clk_gate_read(gate);
if (set)
reg |= BIT(gate->bit_idx);
@@ -80,7 +98,7 @@ static void clk_gate_endisable(struct clk_hw *hw, int enable)
reg &= ~BIT(gate->bit_idx);
}
- clk_gate_writel(gate, reg);
+ clk_gate_write(gate, reg);
if (gate->lock)
spin_unlock_irqrestore(gate->lock, flags);
@@ -105,7 +123,7 @@ int clk_gate_is_enabled(struct clk_hw *hw)
u32 reg;
struct clk_gate *gate = to_clk_gate(hw);
- reg = clk_gate_readl(gate);
+ reg = clk_gate_read(gate);
/* if a set bit disables this clk, flip it before masking */
if (gate->flags & CLK_GATE_SET_TO_DISABLE)
@@ -137,12 +155,30 @@ struct clk_hw *__clk_hw_register_gate(struct device *dev,
struct clk_init_data init = {};
int ret = -EINVAL;
+ /* validate register size option and bit_idx */
if (clk_gate_flags & CLK_GATE_HIWORD_MASK) {
if (bit_idx > 15) {
pr_err("gate bit exceeds LOWORD field\n");
return ERR_PTR(-EINVAL);
}
}
+ if (clk_gate_flags & CLK_GATE_REG_16BIT) {
+ if (bit_idx > 15) {
+ pr_err("gate bit exceeds 16 bits\n");
+ return ERR_PTR(-EINVAL);
+ }
+ }
+ if (clk_gate_flags & CLK_GATE_REG_8BIT) {
+ if (bit_idx > 7) {
+ pr_err("gate bit exceeds 8 bits\n");
+ return ERR_PTR(-EINVAL);
+ }
+ }
+ if ((clk_gate_flags & CLK_GATE_HIWORD_MASK) &&
+ clk_gate_flags & (CLK_GATE_REG_8BIT | CLK_GATE_REG_16BIT)) {
+ pr_err("HIWORD_MASK required 32-bit register\n");
+ return ERR_PTR(-EINVAL);
+ }
/* allocate the gate */
gate = kzalloc(sizeof(*gate), GFP_KERNEL);
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 4a537260f655..eaa6ff1d0b2e 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -508,12 +508,16 @@ void of_fixed_clk_setup(struct device_node *np);
* CLK_GATE_BIG_ENDIAN - by default little endian register accesses are used for
* the gate register. Setting this flag makes the register accesses big
* endian.
+ * CLK_GATE_REG_8BIT - by default 32bit register accesses are used for
+ * the gate register. Setting this flag makes the register accesses 8bit.
+ * CLK_GATE_REG_16BIT - by default 32bit register accesses are used for
+ * the gate register. Setting this flag makes the register accesses 16bit.
*/
struct clk_gate {
struct clk_hw hw;
void __iomem *reg;
u8 bit_idx;
- u8 flags;
+ u32 flags;
spinlock_t *lock;
};
@@ -522,6 +526,8 @@ struct clk_gate {
#define CLK_GATE_SET_TO_DISABLE BIT(0)
#define CLK_GATE_HIWORD_MASK BIT(1)
#define CLK_GATE_BIG_ENDIAN BIT(2)
+#define CLK_GATE_REG_8BIT BIT(3)
+#define CLK_GATE_REG_16BIT BIT(4)
extern const struct clk_ops clk_gate_ops;
struct clk_hw *__clk_hw_register_gate(struct device *dev,
@@ -675,13 +681,17 @@ struct clk_div_table {
* CLK_DIVIDER_BIG_ENDIAN - By default little endian register accesses are used
* for the divider register. Setting this flag makes the register accesses
* big endian.
+ * CLK_DIVIDER_REG_8BIT - by default 32bit register accesses are used for
+ * the gate register. Setting this flag makes the register accesses 8bit.
+ * CLK_DIVIDER_REG_16BIT - by default 32bit register accesses are used for
+ * the gate register. Setting this flag makes the register accesses 16bit.
*/
struct clk_divider {
struct clk_hw hw;
void __iomem *reg;
u8 shift;
u8 width;
- u8 flags;
+ u16 flags;
const struct clk_div_table *table;
spinlock_t *lock;
};
@@ -697,6 +707,8 @@ struct clk_divider {
#define CLK_DIVIDER_READ_ONLY BIT(5)
#define CLK_DIVIDER_MAX_AT_ZERO BIT(6)
#define CLK_DIVIDER_BIG_ENDIAN BIT(7)
+#define CLK_DIVIDER_REG_8BIT BIT(8)
+#define CLK_DIVIDER_REG_16BIT BIT(9)
extern const struct clk_ops clk_divider_ops;
extern const struct clk_ops clk_divider_ro_ops;
@@ -726,18 +738,18 @@ struct clk_hw *__clk_hw_register_divider(struct device *dev,
struct device_node *np, const char *name,
const char *parent_name, const struct clk_hw *parent_hw,
const struct clk_parent_data *parent_data, unsigned long flags,
- void __iomem *reg, u8 shift, u8 width, u8 clk_divider_flags,
+ void __iomem *reg, u8 shift, u8 width, u32 clk_divider_flags,
const struct clk_div_table *table, spinlock_t *lock);
struct clk_hw *__devm_clk_hw_register_divider(struct device *dev,
struct device_node *np, const char *name,
const char *parent_name, const struct clk_hw *parent_hw,
const struct clk_parent_data *parent_data, unsigned long flags,
- void __iomem *reg, u8 shift, u8 width, u8 clk_divider_flags,
+ void __iomem *reg, u8 shift, u8 width, u32 clk_divider_flags,
const struct clk_div_table *table, spinlock_t *lock);
struct clk *clk_register_divider_table(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
- u8 clk_divider_flags, const struct clk_div_table *table,
+ u32 clk_divider_flags, const struct clk_div_table *table,
spinlock_t *lock);
/**
* clk_register_divider - register a divider clock with the clock framework
--
2.39.2
^ permalink raw reply related
* [RESEND v7 15/37] clk: renesas: Add SH7750/7751 CPG Driver
From: Yoshinori Sato @ 2024-04-04 5:14 UTC (permalink / raw)
To: linux-sh
Cc: Yoshinori Sato, Damien Le Moal, Niklas Cassel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
Michael Turquette, Stephen Boyd, David Airlie, Daniel Vetter,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
Thomas Gleixner, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Greg Kroah-Hartman, Jiri Slaby,
Magnus Damm, Daniel Lezcano, Rich Felker,
John Paul Adrian Glaubitz, Lee Jones, Helge Deller,
Heiko Stuebner, Shawn Guo, Sebastian Reichel, Chris Morgan,
Linus Walleij, Arnd Bergmann, David Rientjes, Hyeonggon Yoo,
Vlastimil Babka, Baoquan He, Andrew Morton, Guenter Roeck,
Kefeng Wang, Stephen Rothwell, Javier Martinez Canillas, Guo Ren,
Azeem Shaikh, Max Filippov, Jonathan Corbet, Jacky Huang,
Herve Codina, Manikanta Guntupalli, Anup Patel, Biju Das,
Uwe Kleine-König, Sam Ravnborg, Sergey Shtylyov,
Laurent Pinchart, linux-ide, devicetree, linux-kernel,
linux-renesas-soc, linux-clk, dri-devel, linux-pci, linux-serial,
linux-fbdev
In-Reply-To: <cover.1712207606.git.ysato@users.sourceforge.jp>
Renesas SH7750 and SH7751 series CPG driver.
This driver supported frequency control and clock gating.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
drivers/clk/renesas/Kconfig | 13 +-
drivers/clk/renesas/Makefile | 1 +
drivers/clk/renesas/clk-sh7750.c | 480 +++++++++++++++++++++++++++++++
3 files changed, 491 insertions(+), 3 deletions(-)
create mode 100644 drivers/clk/renesas/clk-sh7750.c
diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index d252150402e8..482efcb6e76e 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
config CLK_RENESAS
- bool "Renesas SoC clock support" if COMPILE_TEST && !ARCH_RENESAS
- default y if ARCH_RENESAS
+ bool "Renesas SoC clock support" if COMPILE_TEST && !ARCH_RENESAS && !SUPERH
+ default y if ARCH_RENESAS || SUPERH
select CLK_EMEV2 if ARCH_EMEV2
select CLK_RZA1 if ARCH_R7S72100
select CLK_R7S9210 if ARCH_R7S9210
@@ -41,6 +41,9 @@ config CLK_RENESAS
select CLK_R9A08G045 if ARCH_R9A08G045
select CLK_R9A09G011 if ARCH_R9A09G011
select CLK_SH73A0 if ARCH_SH73A0
+ select CLK_SH7750 if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
+ CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751 || \
+ CPU_SUBTYPE_SH7751R
if CLK_RENESAS
@@ -198,7 +201,6 @@ config CLK_SH73A0
select CLK_RENESAS_CPG_MSTP
select CLK_RENESAS_DIV6
-
# Family
config CLK_RCAR_CPG_LIB
bool "CPG/MSSR library functions" if COMPILE_TEST
@@ -228,6 +230,11 @@ config CLK_RZG2L
bool "Renesas RZ/{G2L,G2UL,G3S,V2L} family clock support" if COMPILE_TEST
select RESET_CONTROLLER
+config CLK_SH7750
+ bool "Renesas SH7750/7751 family clock support" if COMPILE_TEST
+ help
+ This is a driver for SH7750 / SH7751 CPG.
+
# Generic
config CLK_RENESAS_CPG_MSSR
bool "CPG/MSSR clock support" if COMPILE_TEST
diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile
index f7e18679c3b8..ea0ffa8d59c4 100644
--- a/drivers/clk/renesas/Makefile
+++ b/drivers/clk/renesas/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_CLK_R9A07G054) += r9a07g044-cpg.o
obj-$(CONFIG_CLK_R9A08G045) += r9a08g045-cpg.o
obj-$(CONFIG_CLK_R9A09G011) += r9a09g011-cpg.o
obj-$(CONFIG_CLK_SH73A0) += clk-sh73a0.o
+obj-$(CONFIG_CLK_SH7750) += clk-sh7750.o
# Family
obj-$(CONFIG_CLK_RCAR_CPG_LIB) += rcar-cpg-lib.o
diff --git a/drivers/clk/renesas/clk-sh7750.c b/drivers/clk/renesas/clk-sh7750.c
new file mode 100644
index 000000000000..043269d31200
--- /dev/null
+++ b/drivers/clk/renesas/clk-sh7750.c
@@ -0,0 +1,480 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas SH7750/51 CPG driver
+ *
+ * Copyright 2023 Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+/* PCLK divide rate selector */
+static const struct clk_div_table pdiv_table[] = {
+ { .val = 0, .div = 2, },
+ { .val = 1, .div = 3, },
+ { .val = 2, .div = 4, },
+ { .val = 3, .div = 6, },
+ { .val = 4, .div = 8, },
+ { }
+};
+
+/* ICLK and BCLK divide rate selector */
+static const struct clk_div_table div_table[] = {
+ { .val = 0, .div = 1, },
+ { .val = 1, .div = 2, },
+ { .val = 2, .div = 3, },
+ { .val = 3, .div = 4, },
+ { .val = 4, .div = 6, },
+ { .val = 5, .div = 8, },
+ { }
+};
+
+struct cpg_priv {
+ struct clk_hw hw;
+ spinlock_t clklock;
+ void __iomem *frqcr;
+ void __iomem *clkstp00;
+ u32 mode;
+ u32 feat;
+};
+
+/* CPG feature flag */
+#define CPG_DIV1 BIT(0) /* 7750, 7750S, 7751 */
+#define MSTP_CR2 BIT(1) /* 7750S, 7750R, 7751, 7751R */
+#define MSTP_CLKSTP BIT(2) /* 7750R, 7751, 7751R */
+#define MSTP_CSTP2 BIT(3) /* 7751, 7751R */
+
+enum {
+ CPG_SH7750,
+ CPG_SH7750S,
+ CPG_SH7750R,
+ CPG_SH7751,
+ CPG_SH7751R,
+};
+
+static const u32 cpg_feature[] = {
+ [CPG_SH7750] = CPG_DIV1,
+ [CPG_SH7750S] = CPG_DIV1 | MSTP_CR2,
+ [CPG_SH7750R] = MSTP_CR2 | MSTP_CLKSTP,
+ [CPG_SH7751] = CPG_DIV1 | MSTP_CR2 | MSTP_CLKSTP | MSTP_CSTP2,
+ [CPG_SH7751R] = MSTP_CR2 | MSTP_CLKSTP | MSTP_CSTP2,
+};
+
+enum clk_type {CLK_DIV, CLK_STBCR, CLK_STBCR2, CLK_CLKSTP00};
+
+enum {
+ FRQCR = 0,
+ STBCR = 4,
+ WTCNT = 8,
+ WTCSR = 12,
+ STBCR2 = 16,
+ CLKSTP00 = 0,
+ CLKSTPCLR00 = 8,
+};
+
+static struct cpg_priv *cpg_data;
+
+#define to_priv(_hw) container_of(_hw, struct cpg_priv, hw)
+
+#define FRQCR_PLL1EN BIT(10)
+static const unsigned int pll1mult[] = { 12, 12, 6, 12, 6, 12, 1};
+
+static unsigned long pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct cpg_priv *cpg = to_priv(hw);
+ unsigned long rate = parent_rate;
+ u16 frqcr;
+
+ frqcr = ioread16(cpg->frqcr);
+ if (frqcr & FRQCR_PLL1EN) {
+ rate *= pll1mult[cpg->mode];
+ if (cpg->mode < 6 && (cpg->feat & CPG_DIV1))
+ rate /= 2;
+ }
+ return rate;
+}
+
+static void get_round_rate(struct cpg_priv *cpg,
+ unsigned long *out, bool *pllen,
+ unsigned long rate, unsigned long prate)
+{
+ long pllout, res;
+ bool pll;
+
+ if (cpg->mode < 6 && (cpg->feat & CPG_DIV1))
+ prate /= 2;
+
+ pllout = prate * pll1mult[cpg->mode];
+ if (abs(pllout - rate) > abs(prate - rate)) {
+ res = prate;
+ pll = false;
+ } else {
+ res = pllout;
+ pll = true;
+ }
+ if (out)
+ *out = res;
+ if (pllen)
+ *pllen = pll;
+}
+
+static int pll_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
+{
+ struct cpg_priv *cpg = to_priv(hw);
+
+ get_round_rate(cpg, &req->rate, NULL, req->rate, req->best_parent_rate);
+ return 0;
+}
+
+static int pll_set_rate(struct clk_hw *hw,
+ unsigned long rate, unsigned long prate)
+{
+ struct cpg_priv *cpg = to_priv(hw);
+ bool oldpll, newpll;
+ u16 frqcr;
+
+ frqcr = ioread16(cpg->frqcr);
+ get_round_rate(cpg, NULL, &newpll, rate, prate);
+ oldpll = frqcr & FRQCR_PLL1EN;
+ frqcr &= ~FRQCR_PLL1EN;
+
+ if (newpll) {
+ frqcr |= FRQCR_PLL1EN;
+ if (!oldpll) {
+ /* set PLL wakeup delay time */
+ iowrite16(0xa500, cpg->frqcr + WTCNT);
+ iowrite16(0xa507, cpg->frqcr + WTCNT);
+ iowrite16(0x5a00, cpg->frqcr + WTCSR);
+ }
+ }
+ iowrite16(frqcr, cpg->frqcr);
+
+ /* Test for new PLL state */
+ frqcr = ioread16(cpg->frqcr);
+ oldpll = frqcr & FRQCR_PLL1EN;
+ return !(oldpll == newpll);
+}
+
+static const struct clk_ops pll_ops = {
+ .recalc_rate = pll_recalc_rate,
+ .determine_rate = pll_determine_rate,
+ .set_rate = pll_set_rate,
+};
+
+#define PLLOUT "pllout"
+
+static int register_pll(struct device_node *node, struct cpg_priv *cpg)
+{
+ const char *clk_name = node->name;
+ const char *parent_name;
+ struct clk_init_data init = {
+ .name = PLLOUT,
+ .ops = &pll_ops,
+ .flags = 0,
+ .num_parents = 1,
+ };
+ int ret;
+
+ parent_name = of_clk_get_parent_name(node, 0);
+ init.parent_names = &parent_name;
+ cpg->hw.init = &init;
+
+ ret = of_clk_hw_register(node, &cpg->hw);
+ if (ret < 0)
+ pr_err("%pOF: failed to add provider %s (%d)\n",
+ node, clk_name, ret);
+ return ret;
+}
+
+static void clkstp00_sw(struct clk_hw *hw, bool on)
+{
+ u32 val;
+ struct clk_gate *gate = to_clk_gate(hw);
+
+ val = BIT(gate->bit_idx);
+ if (on)
+ writel(val, gate->reg + CLKSTPCLR00);
+ else
+ writel(val, gate->reg);
+}
+
+static int clkstp00_enable(struct clk_hw *hw)
+{
+ clkstp00_sw(hw, true);
+ return 0;
+}
+
+static void clkstp00_disable(struct clk_hw *hw)
+{
+ clkstp00_sw(hw, false);
+}
+
+static int clkstp00_is_enabled(struct clk_hw *hw)
+{
+ u8 val;
+ struct clk_gate *gate = to_clk_gate(hw);
+
+ val = readb(gate->reg);
+ val &= 1 << gate->bit_idx;
+ return val == 0;
+}
+
+static const struct clk_ops gate_clkstp00_ops = {
+ .enable = clkstp00_enable,
+ .disable = clkstp00_disable,
+ .is_enabled = clkstp00_is_enabled,
+};
+
+static struct clk_hw *clk_hw_register_clkstp(struct device_node *node,
+ const char *name,
+ const char *parent,
+ void __iomem *reg, int bit,
+ spinlock_t *lock)
+{
+ struct clk_gate *gate;
+ struct clk_init_data init = {
+ .name = name,
+ .ops = &gate_clkstp00_ops,
+ .flags = 0,
+ .parent_names = &parent,
+ .num_parents = 1,
+ };
+ struct clk_hw *hw;
+ int ret;
+
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (gate == NULL)
+ goto error;
+ gate->reg = reg;
+ gate->bit_idx = bit;
+ gate->flags = 0;
+ gate->lock = lock;
+ gate->hw.init = &init;
+ hw = &gate->hw;
+ ret = of_clk_hw_register(node, hw);
+ if (ret < 0)
+ goto error;
+ return hw;
+error:
+ kfree(gate);
+ return ERR_PTR(ret);
+}
+
+#define STBCR_BASE 5
+#define CLKSTP_BASE 2
+static int register_div(struct device_node *node, struct cpg_priv *cpg)
+{
+ static const char * const divout[] = {
+ "fck", "bck", "ick",
+ };
+ static const char * const stbcrout[] = {
+ "sci_clk", "rtc_clk", "tmu012_clk", /* STBCR */
+ "scif_clk", "dmac_clk", /* STBCR */
+ "ubc_clk", "sq_clk", /* STBCR2 */
+ };
+ static const char * const clkstpout[] = {
+ "intc_clk", "tmu34_clk", "pcic_clk", /* CLKSTP00 */
+ };
+
+ int num_clk = ARRAY_SIZE(divout) + ARRAY_SIZE(stbcrout) + ARRAY_SIZE(clkstpout);
+ struct clk_hw_onecell_data *data;
+ struct clk_hw *reg_hw;
+ unsigned int i, n;
+ int ret;
+
+ data = kzalloc(struct_size(data, hws, num_clk + 1), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ num_clk = 0;
+ for (i = 0; i < ARRAY_SIZE(divout); i++) {
+ reg_hw = __clk_hw_register_divider(NULL, node, divout[i],
+ PLLOUT, NULL, NULL,
+ 0, cpg->frqcr, i * 3, 3,
+ CLK_DIVIDER_REG_16BIT,
+ (i == 0) ? pdiv_table : div_table,
+ &cpg->clklock);
+ if (IS_ERR(reg_hw)) {
+ ret = PTR_ERR(reg_hw);
+ goto error;
+ }
+ data->hws[num_clk++] = reg_hw;
+ }
+
+ n = (cpg->feat & MSTP_CR2) ? ARRAY_SIZE(stbcrout) : STBCR_BASE;
+ for (i = 0; i < n; i++) {
+ u32 off = (i < (ARRAY_SIZE(stbcrout) - 2)) ? STBCR : STBCR2;
+
+ reg_hw = __clk_hw_register_gate(NULL, node, stbcrout[i],
+ divout[0], NULL, NULL,
+ 0, cpg->frqcr + off, i % STBCR_BASE,
+ CLK_GATE_REG_8BIT | CLK_GATE_SET_TO_DISABLE,
+ &cpg->clklock);
+ if (IS_ERR(reg_hw)) {
+ ret = PTR_ERR(reg_hw);
+ goto error;
+ }
+ data->hws[num_clk++] = reg_hw;
+ }
+
+ if (cpg->feat & MSTP_CLKSTP) {
+ n = (cpg->feat & MSTP_CSTP2) ? ARRAY_SIZE(clkstpout) : CLKSTP_BASE;
+ for (i = 0; i < n; i++) {
+ reg_hw = clk_hw_register_clkstp(node, clkstpout[i],
+ divout[0], cpg->clkstp00,
+ i, &cpg->clklock);
+ if (IS_ERR(reg_hw)) {
+ ret = PTR_ERR(reg_hw);
+ goto error;
+ }
+ data->hws[num_clk++] = reg_hw;
+ }
+ }
+
+ data->num = num_clk;
+ ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, data);
+ if (ret < 0)
+ goto error;
+ return 0;
+
+error:
+ pr_err("%pOF: failed to register clock (%d)\n",
+ node, ret);
+ for (num_clk--; num_clk >= 0; num_clk--)
+ kfree(data->hws[num_clk]);
+ kfree(data);
+ return ret;
+}
+
+#define NR_CLKMODE 7
+static int sh7750_cpg_setup(struct device_node *node, u32 feat)
+{
+ struct cpg_priv *cpg;
+ u32 mode = NR_CLKMODE;
+ int ret = 0;
+
+ cpg_data = NULL;
+
+ of_property_read_u32_index(node, "renesas,mode", 0, &mode);
+ if (mode >= NR_CLKMODE) {
+ pr_err("%s: Invalid clock mode setting (%u)\n",
+ node->name, mode);
+ return -EINVAL;
+ }
+
+ cpg = kzalloc(sizeof(struct cpg_priv), GFP_KERNEL);
+ if (!cpg)
+ return -ENOMEM;
+
+ cpg->frqcr = of_iomap(node, 0);
+ if (cpg->frqcr == NULL) {
+ pr_err("%pOF: failed to map divide register", node);
+ ret = -ENODEV;
+ goto cpg_free;
+ }
+
+ if (feat & MSTP_CLKSTP) {
+ cpg->clkstp00 = of_iomap(node, 1);
+ if (cpg->clkstp00 == NULL) {
+ pr_err("%pOF: failed to map clkstp00 register", node);
+ ret = -ENODEV;
+ goto unmap_frqcr;
+ }
+ }
+ cpg->feat = feat;
+ cpg->mode = mode;
+
+ ret = register_pll(node, cpg);
+ if (ret < 0)
+ goto unmap_clkstp00;
+
+ ret = register_div(node, cpg);
+ if (ret < 0)
+ goto unmap_clkstp00;
+
+ cpg_data = cpg;
+ return 0;
+
+unmap_clkstp00:
+ iounmap(cpg->clkstp00);
+unmap_frqcr:
+ iounmap(cpg->frqcr);
+cpg_free:
+ kfree(cpg);
+ return ret;
+}
+
+static void __init sh7750_cpg_init(struct device_node *node)
+{
+ sh7750_cpg_setup(node, cpg_feature[CPG_SH7750]);
+}
+
+static void __init sh7750s_cpg_init(struct device_node *node)
+{
+ sh7750_cpg_setup(node, cpg_feature[CPG_SH7750S]);
+}
+
+static void __init sh7750r_cpg_init(struct device_node *node)
+{
+ sh7750_cpg_setup(node, cpg_feature[CPG_SH7750R]);
+}
+
+static void __init sh7751_cpg_init(struct device_node *node)
+{
+ sh7750_cpg_setup(node, cpg_feature[CPG_SH7751]);
+}
+
+static void __init sh7751r_cpg_init(struct device_node *node)
+{
+ sh7750_cpg_setup(node, cpg_feature[CPG_SH7751R]);
+}
+
+CLK_OF_DECLARE_DRIVER(sh7750_cpg, "renesas,sh7750-cpg",
+ sh7750_cpg_init);
+CLK_OF_DECLARE_DRIVER(sh7750s_cpg, "renesas,sh7750s-cpg",
+ sh7750s_cpg_init);
+CLK_OF_DECLARE_DRIVER(sh7750r_cpg, "renesas,sh7750r-cpg",
+ sh7750r_cpg_init);
+CLK_OF_DECLARE_DRIVER(sh7751_cpg, "renesas,sh7751-cpg",
+ sh7751_cpg_init);
+CLK_OF_DECLARE_DRIVER(sh7751r_cpg, "renesas,sh7751r-cpg",
+ sh7751r_cpg_init);
+
+static int sh7750_cpg_probe(struct platform_device *pdev)
+{
+ u32 feature;
+
+ if (cpg_data)
+ return 0;
+ feature = *(u32 *)of_device_get_match_data(&pdev->dev);
+ return sh7750_cpg_setup(pdev->dev.of_node, feature);
+}
+
+static const struct of_device_id sh7750_cpg_of_match[] = {
+ { .compatible = "renesas,sh7750-cpg",
+ .data = &cpg_feature[CPG_SH7750] },
+ { .compatible = "renesas,sh7750s-cpg",
+ .data = &cpg_feature[CPG_SH7750S] },
+ { .compatible = "renesas,sh7750r-cpg",
+ .data = &cpg_feature[CPG_SH7750R] },
+ { .compatible = "renesas,sh7751-cpg",
+ .data = &cpg_feature[CPG_SH7751] },
+ { .compatible = "renesas,sh7751r-cpg",
+ .data = &cpg_feature[CPG_SH7751R] },
+ { }
+};
+
+static struct platform_driver sh7750_cpg_driver = {
+ .probe = sh7750_cpg_probe,
+ .driver = {
+ .name = "sh7750-cpg",
+ .of_match_table = sh7750_cpg_of_match,
+ },
+};
+builtin_platform_driver(sh7750_cpg_driver);
--
2.39.2
^ permalink raw reply related
* [RESEND v7 16/37] irqchip: Add SH7751 INTC driver
From: Yoshinori Sato @ 2024-04-04 5:14 UTC (permalink / raw)
To: linux-sh
Cc: Yoshinori Sato, Damien Le Moal, Niklas Cassel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
Michael Turquette, Stephen Boyd, David Airlie, Daniel Vetter,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
Thomas Gleixner, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Greg Kroah-Hartman, Jiri Slaby,
Magnus Damm, Daniel Lezcano, Rich Felker,
John Paul Adrian Glaubitz, Lee Jones, Helge Deller,
Heiko Stuebner, Shawn Guo, Sebastian Reichel, Chris Morgan,
Linus Walleij, Arnd Bergmann, David Rientjes, Hyeonggon Yoo,
Vlastimil Babka, Baoquan He, Andrew Morton, Guenter Roeck,
Kefeng Wang, Stephen Rothwell, Javier Martinez Canillas, Guo Ren,
Azeem Shaikh, Max Filippov, Jonathan Corbet, Jacky Huang,
Herve Codina, Manikanta Guntupalli, Anup Patel, Biju Das,
Uwe Kleine-König, Sam Ravnborg, Sergey Shtylyov,
Laurent Pinchart, linux-ide, devicetree, linux-kernel,
linux-renesas-soc, linux-clk, dri-devel, linux-pci, linux-serial,
linux-fbdev
In-Reply-To: <cover.1712207606.git.ysato@users.sourceforge.jp>
Renesas SH7751 Internal interrupt controller driver.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
drivers/irqchip/Kconfig | 8 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-renesas-sh7751.c | 282 +++++++++++++++++++++++++++
3 files changed, 291 insertions(+)
create mode 100644 drivers/irqchip/irq-renesas-sh7751.c
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 72c07a12f5e1..33badb5b4f00 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -690,4 +690,12 @@ config SUNPLUS_SP7021_INTC
chained controller, routing all interrupt source in P-Chip to
the primary controller on C-Chip.
+config RENESAS_SH7751_INTC
+ bool "Renesas SH7751 Interrupt Controller"
+ depends on SH_DEVICE_TREE || COMPILE_TEST
+ select IRQ_DOMAIN_HIERARCHY
+ help
+ Support for the Renesas SH7751 On-chip interrupt controller.
+ And external interrupt encoder for some targets.
+
endmenu
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index ec4a18380998..51855034a895 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -121,3 +121,4 @@ obj-$(CONFIG_IRQ_IDT3243X) += irq-idt3243x.o
obj-$(CONFIG_APPLE_AIC) += irq-apple-aic.o
obj-$(CONFIG_MCHP_EIC) += irq-mchp-eic.o
obj-$(CONFIG_SUNPLUS_SP7021_INTC) += irq-sp7021-intc.o
+obj-$(CONFIG_RENESAS_SH7751_INTC) += irq-renesas-sh7751.o
diff --git a/drivers/irqchip/irq-renesas-sh7751.c b/drivers/irqchip/irq-renesas-sh7751.c
new file mode 100644
index 000000000000..91d6dc3ed04c
--- /dev/null
+++ b/drivers/irqchip/irq-renesas-sh7751.c
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas SH7751 interrupt controller driver
+ *
+ * Copyright 2023 Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <dt-bindings/interrupt-controller/renesas,sh7751-intc.h>
+
+struct ipr {
+ u16 off;
+ u16 idx;
+};
+
+struct sh7751_intc_priv {
+ const struct ipr *iprmap;
+ void __iomem *base;
+ void __iomem *intpri00;
+ bool irlm;
+};
+
+enum {
+ R_ICR = 0x00,
+ R_IPR = 0x04,
+ R_INTPRI00 = 0x00,
+ R_INTREQ00 = 0x20,
+ R_INTMSK00 = 0x40,
+ R_INTMSKCLR00 = 0x60,
+};
+
+#define ICR_IRLM BIT(7)
+
+/*
+ * SH7751 IRQ mapping
+ * IRQ16 - 63: Group0 - IPRA to IPRD
+ * IRQ16 - 31: external IRL input (ICR.IRLM is 0)
+ * IRQ80 - 92: Group1 - INTPRI00
+ */
+#define IRQ_START 16
+#define MAX_IRL (IRQ_START + NR_IRL)
+#define GRP0_IRQ_END 63
+#define GRP1_IRQ_START 80
+#define IRQ_END 92
+
+#define NR_IPRMAP0 (GRP0_IRQ_END - IRQ_START + 1)
+#define NR_IPRMAP1 (IRQ_END - GRP1_IRQ_START)
+#define IPR_PRI_MASK 0x000f
+
+#define IPRA 0
+#define IPRB 4
+#define IPRC 8
+#define IPRD 12
+#define INTPRI00 256
+#define IPR_B12 12
+#define IPR_B8 8
+#define IPR_B4 4
+#define IPR_B0 0
+
+/* SH7751 EVT to IPR mapping table */
+static const struct ipr sh7751_iprmap[] = {
+ [evt2irq(0x240)] = {IPRD, IPR_B12}, /* IRL0 (ICR.IRLM=1) */
+ [evt2irq(0x2a0)] = {IPRD, IPR_B8}, /* IRL1 (ICR.IRLM=1) */
+ [evt2irq(0x300)] = {IPRD, IPR_B4}, /* IRL2 (ICR.IRLM=1) */
+ [evt2irq(0x360)] = {IPRD, IPR_B0}, /* IRL3 (ICR.IRLM=1) */
+ [evt2irq(0x400)] = {IPRA, IPR_B12}, /* TMU0 */
+ [evt2irq(0x420)] = {IPRA, IPR_B8}, /* TMU1 */
+ [evt2irq(0x440)] = {IPRA, IPR_B4}, /* TMU2 TNUI */
+ [evt2irq(0x460)] = {IPRA, IPR_B4}, /* TMU2 TICPI */
+ [evt2irq(0x480)] = {IPRA, IPR_B0}, /* RTC ATI */
+ [evt2irq(0x4a0)] = {IPRA, IPR_B0}, /* RTC PRI */
+ [evt2irq(0x4c0)] = {IPRA, IPR_B0}, /* RTC CUI */
+ [evt2irq(0x4e0)] = {IPRB, IPR_B4}, /* SCI ERI */
+ [evt2irq(0x500)] = {IPRB, IPR_B4}, /* SCI RXI */
+ [evt2irq(0x520)] = {IPRB, IPR_B4}, /* SCI TXI */
+ [evt2irq(0x540)] = {IPRB, IPR_B4}, /* SCI TEI */
+ [evt2irq(0x560)] = {IPRB, IPR_B12}, /* WDT */
+ [evt2irq(0x580)] = {IPRB, IPR_B8}, /* REF RCMI */
+ [evt2irq(0x5a0)] = {IPRB, IPR_B4}, /* REF ROVI */
+ [evt2irq(0x600)] = {IPRC, IPR_B0}, /* H-UDI */
+ [evt2irq(0x620)] = {IPRC, IPR_B12}, /* GPIO */
+ [evt2irq(0x640)] = {IPRC, IPR_B8}, /* DMAC DMTE0 */
+ [evt2irq(0x660)] = {IPRC, IPR_B8}, /* DMAC DMTE1 */
+ [evt2irq(0x680)] = {IPRC, IPR_B8}, /* DMAC DMTE2 */
+ [evt2irq(0x6a0)] = {IPRC, IPR_B8}, /* DMAC DMTE3 */
+ [evt2irq(0x6c0)] = {IPRC, IPR_B8}, /* DMAC DMAE */
+ [evt2irq(0x700)] = {IPRC, IPR_B4}, /* SCIF ERI */
+ [evt2irq(0x720)] = {IPRC, IPR_B4}, /* SCIF RXI */
+ [evt2irq(0x740)] = {IPRC, IPR_B4}, /* SCIF BRI */
+ [evt2irq(0x760)] = {IPRC, IPR_B4}, /* SCIF TXI */
+ [evt2irq(0x780)] = {IPRC, IPR_B8}, /* DMAC DMTE4 */
+ [evt2irq(0x7a0)] = {IPRC, IPR_B8}, /* DMAC DMTE5 */
+ [evt2irq(0x7c0)] = {IPRC, IPR_B8}, /* DMAC DMTE6 */
+ [evt2irq(0x7e0)] = {IPRC, IPR_B8}, /* DMAC DMTE7 */
+ [evt2irq(0xa00)] = {INTPRI00, IPR_B0}, /* PCIC PCISERR */
+ [evt2irq(0xa20)] = {INTPRI00, IPR_B4}, /* PCIC PCIDMA3 */
+ [evt2irq(0xa40)] = {INTPRI00, IPR_B4}, /* PCIC PCIDMA2 */
+ [evt2irq(0xa60)] = {INTPRI00, IPR_B4}, /* PCIC PCIDMA1 */
+ [evt2irq(0xa80)] = {INTPRI00, IPR_B4}, /* PCIC PCIDMA0 */
+ [evt2irq(0xaa0)] = {INTPRI00, IPR_B4}, /* PCIC PCIPWON */
+ [evt2irq(0xac0)] = {INTPRI00, IPR_B4}, /* PCIC PCIPWDWN */
+ [evt2irq(0xae0)] = {INTPRI00, IPR_B4}, /* PCIC PCIERR */
+ [evt2irq(0xb00)] = {INTPRI00, IPR_B8}, /* TMU3 */
+ [evt2irq(0xb80)] = {INTPRI00, IPR_B12}, /* TMU4 */
+};
+
+/*
+ * IPR registers have 4bit priority x 4 entry (16bits)
+ */
+static void update_ipr(struct sh7751_intc_priv *priv, unsigned int irq, u16 pri)
+{
+ const struct ipr *ipr = NULL;
+ void __iomem *ipr_base;
+ unsigned int offset;
+ u16 mask;
+
+ ipr = priv->iprmap + irq;
+ if (irq < GRP1_IRQ_START) {
+ /* Group0 */
+ ipr_base = priv->base + R_IPR;
+ offset = ipr->off;
+ } else {
+ /* Group1 */
+ ipr_base = priv->intpri00;
+ offset = ipr->off - INTPRI00;
+ }
+ mask = ~(IPR_PRI_MASK << ipr->idx);
+ pri = (pri & IPR_PRI_MASK) << ipr->idx;
+ mask &= __raw_readw(ipr_base + offset);
+ __raw_writew(mask | pri, ipr_base + offset);
+}
+
+static inline bool is_valid_irq(unsigned int irq)
+{
+ /* IRQ16 - 63 */
+ if (irq >= IRQ_START && irq < IRQ_START + NR_IPRMAP0)
+ return true;
+ /* IRQ80 - 92 */
+ if (irq >= GRP1_IRQ_START && irq <= IRQ_END)
+ return true;
+ return false;
+}
+
+static inline struct sh7751_intc_priv *irq_data_to_priv(struct irq_data *data)
+{
+ return data->domain->host_data;
+}
+
+/* Interrupt unmask priority is 1, mask priority is 0 */
+#define PRI_ENABLE 1
+#define PRI_DISABLE 0
+static void endisable_irq(struct irq_data *data, bool enable)
+{
+ struct sh7751_intc_priv *priv;
+ unsigned int irq;
+
+ priv = irq_data_to_priv(data);
+
+ irq = irqd_to_hwirq(data);
+ if (!is_valid_irq(irq)) {
+ /* IRQ out of range */
+ pr_warn_once("%s: IRQ %u is out of range\n", __FILE__, irq);
+ return;
+ }
+
+ if (irq <= MAX_IRL && !priv->irlm) {
+ /* IRL encoded external interrupt */
+ /* enable and disable from SR.IMASK */
+ update_sr_imask(irq - IRQ_START, enable);
+ } else {
+ /* Internal peripheral interrupt */
+ /* enable and disable from interrupt priority */
+ update_ipr(priv, irq, enable ? PRI_ENABLE : PRI_DISABLE);
+ }
+}
+
+static void sh7751_mask_irq(struct irq_data *data)
+{
+ endisable_irq(data, false);
+}
+
+static void sh7751_unmask_irq(struct irq_data *data)
+{
+ endisable_irq(data, true);
+}
+
+static const struct irq_chip sh7751_irq_chip = {
+ .name = "SH7751-INTC",
+ .irq_unmask = sh7751_unmask_irq,
+ .irq_mask = sh7751_mask_irq,
+};
+
+static int irq_sh7751_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw_irq_num)
+{
+ irq_set_chip_and_handler(virq, &sh7751_irq_chip, handle_level_irq);
+ irq_get_irq_data(virq)->chip_data = h->host_data;
+ irq_modify_status(virq, IRQ_NOREQUEST, IRQ_NOPROBE);
+ return 0;
+}
+
+static int irq_sh7751_xlate(struct irq_domain *d, struct device_node *ctrlr,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq, unsigned int *out_type)
+{
+ if (WARN_ON(intsize < 1))
+ return -EINVAL;
+ *out_hwirq = evt2irq(intspec[0]);
+ *out_type = IRQ_TYPE_NONE;
+ return 0;
+}
+
+static const struct irq_domain_ops irq_ops = {
+ .map = irq_sh7751_map,
+ .xlate = irq_sh7751_xlate,
+};
+
+static int __init shintc_of_init(struct device_node *intc, struct device_node *parent,
+ const struct ipr *iprmap)
+{
+ struct sh7751_intc_priv *priv;
+ void __iomem *base, *base2;
+ struct irq_domain *domain;
+ u16 icr;
+ int ret;
+
+ priv = kzalloc(sizeof(struct sh7751_intc_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return -ENOMEM;
+
+ base = of_iomap(intc, 0);
+ base2 = of_iomap(intc, 1);
+ if (!base || !base2) {
+ pr_err("%pOFP: Invalid register definition\n", intc);
+ ret = -EINVAL;
+ goto error;
+ }
+
+ priv->base = base;
+ priv->intpri00 = base2;
+ priv->iprmap = iprmap;
+
+ if (of_property_read_bool(intc, "renesas,irlm")) {
+ priv->irlm = true;
+ icr = __raw_readw(priv->base + R_ICR);
+ icr |= ICR_IRLM;
+ __raw_writew(icr, priv->base + R_ICR);
+ }
+
+ domain = irq_domain_add_linear(intc, NR_IRQS, &irq_ops, priv);
+ if (domain == NULL) {
+ pr_err("%pOFP: cannot initialize irq domain\n", intc);
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ irq_set_default_host(domain);
+ pr_info("%pOFP: SH7751 Interrupt controller (%s external IRQ)",
+ intc, priv->irlm ? "4 lines" : "15 level");
+ return 0;
+
+error:
+ if (base)
+ iounmap(base);
+ if (base2)
+ iounmap(base);
+ kfree(priv);
+ return ret;
+}
+
+static int __init sh7751_intc_of_init(struct device_node *intc,
+ struct device_node *parent)
+{
+ return shintc_of_init(intc, parent, sh7751_iprmap);
+}
+
+IRQCHIP_DECLARE(sh_7751_intc, "renesas,sh7751-intc", sh7751_intc_of_init);
--
2.39.2
^ permalink raw reply related
* [RESEND v7 17/37] dt-bindings: interrupt-controller: renesas,sh7751-intc: Add json-schema
From: Yoshinori Sato @ 2024-04-04 5:14 UTC (permalink / raw)
To: linux-sh
Cc: Yoshinori Sato, Damien Le Moal, Niklas Cassel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
Michael Turquette, Stephen Boyd, David Airlie, Daniel Vetter,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
Thomas Gleixner, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Greg Kroah-Hartman, Jiri Slaby,
Magnus Damm, Daniel Lezcano, Rich Felker,
John Paul Adrian Glaubitz, Lee Jones, Helge Deller,
Heiko Stuebner, Shawn Guo, Sebastian Reichel, Chris Morgan,
Linus Walleij, Arnd Bergmann, David Rientjes, Hyeonggon Yoo,
Vlastimil Babka, Baoquan He, Andrew Morton, Guenter Roeck,
Kefeng Wang, Stephen Rothwell, Javier Martinez Canillas, Guo Ren,
Azeem Shaikh, Max Filippov, Jonathan Corbet, Jacky Huang,
Herve Codina, Manikanta Guntupalli, Anup Patel, Biju Das,
Uwe Kleine-König, Sam Ravnborg, Sergey Shtylyov,
Laurent Pinchart, linux-ide, devicetree, linux-kernel,
linux-renesas-soc, linux-clk, dri-devel, linux-pci, linux-serial,
linux-fbdev
In-Reply-To: <cover.1712207606.git.ysato@users.sourceforge.jp>
Renesas SH7751 INTC json-schema.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
.../renesas,sh7751-intc.yaml | 53 +++++++++++++++++++
1 file changed, 53 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-intc.yaml
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-intc.yaml
new file mode 100644
index 000000000000..fb924eff465d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-intc.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,sh7751-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas SH7751 Interrupt Controller
+
+maintainers:
+ - Yoshinori Sato <ysato@users.sourceforge.jp>
+
+properties:
+ compatible:
+ items:
+ - const: renesas,sh7751-intc
+
+ '#interrupt-cells':
+ const: 1
+
+ interrupt-controller: true
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: ICR
+ - const: INTPRI00
+
+ renesas,icr-irlm:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: If true four independent interrupt requests mode (ICR.IRLM is 1).
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - '#interrupt-cells'
+ - interrupt-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/renesas,sh7751-intc.h>
+ shintc: interrupt-controller@ffd00000 {
+ compatible = "renesas,sh7751-intc";
+ reg = <0xffd00000 14>, <0xfe080000 128>;
+ reg-names = "ICR", "INTPRI00";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+...
--
2.39.2
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox