* [PATCH 5/8] arm64: dts: qcom: lemans: Move platform resources into lemans-iq9.dtsi
From: Shawn Guo @ 2026-04-09 9:10 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Bartosz Golaszewski, Deepti Jaggi, linux-arm-msm, devicetree,
linux-kernel, Shawn Guo
In-Reply-To: <20260409091100.474358-1-shengchao.guo@oss.qualcomm.com>
Devicetree lemans-iq9.dtsi was created for Lemans variant where platform
resource like clocks, regulator, interconnects, pinctrls and PHYs are
managed by Linux. Move them from lemans.dtsi to lemans-iq9.dtsi, so that
lemans.dtsi could be used by SCMI variant SoCs.
ICE, GMU and PMU are completely moved to lemans-iq9.dtsi, as they do not
seem to be used by SCMI variant.
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/lemans-iq9.dtsi | 2893 ++++++++++++++++++++++
arch/arm64/boot/dts/qcom/lemans.dtsi | 2603 -------------------
2 files changed, 2893 insertions(+), 2603 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/lemans-iq9.dtsi b/arch/arm64/boot/dts/qcom/lemans-iq9.dtsi
index 5c2aa83fe8b4..68e211555909 100644
--- a/arch/arm64/boot/dts/qcom/lemans-iq9.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans-iq9.dtsi
@@ -3,10 +3,2661 @@
* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
*/
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
+#include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
+#include <dt-bindings/clock/qcom,sa8775p-videocc.h>
+#include <dt-bindings/clock/qcom,sa8775p-camcc.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
#include "lemans.dtsi"
/ {
+ clocks {
+ xo_board_clk: xo-board-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+ };
+
+ cpus {
+ cpu0: cpu@0 {
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl0 MASTER_EPSS_L3_APPS
+ &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
+ };
+
+ cpu1: cpu@100 {
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl0 MASTER_EPSS_L3_APPS
+ &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
+ };
+
+ cpu2: cpu@200 {
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl0 MASTER_EPSS_L3_APPS
+ &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
+ };
+
+ cpu3: cpu@300 {
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl0 MASTER_EPSS_L3_APPS
+ &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
+ };
+
+ cpu4: cpu@10000 {
+ operating-points-v2 = <&cpu4_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl1 MASTER_EPSS_L3_APPS
+ &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
+ };
+
+ cpu5: cpu@10100 {
+ operating-points-v2 = <&cpu4_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl1 MASTER_EPSS_L3_APPS
+ &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
+ };
+
+ cpu6: cpu@10200 {
+ operating-points-v2 = <&cpu4_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl1 MASTER_EPSS_L3_APPS
+ &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
+ };
+
+ cpu7: cpu@10300 {
+ operating-points-v2 = <&cpu4_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl1 MASTER_EPSS_L3_APPS
+ &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
+ };
+ };
+
+ cpu0_opp_table: opp-table-cpu0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1267200000 {
+ opp-hz = /bits/ 64 <1267200000>;
+ opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+ };
+
+ opp-1363200000 {
+ opp-hz = /bits/ 64 <1363200000>;
+ opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+ };
+
+ opp-1459200000 {
+ opp-hz = /bits/ 64 <1459200000>;
+ opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+ };
+
+ opp-1536000000 {
+ opp-hz = /bits/ 64 <1536000000>;
+ opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+ };
+
+ opp-1632000000 {
+ opp-hz = /bits/ 64 <1632000000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-1708800000 {
+ opp-hz = /bits/ 64 <1708800000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-1785600000 {
+ opp-hz = /bits/ 64 <1785600000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-1862400000 {
+ opp-hz = /bits/ 64 <1862400000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-1939200000 {
+ opp-hz = /bits/ 64 <1939200000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-2016000000 {
+ opp-hz = /bits/ 64 <2016000000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-2112000000 {
+ opp-hz = /bits/ 64 <2112000000>;
+ opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+ };
+
+ opp-2188800000 {
+ opp-hz = /bits/ 64 <2188800000>;
+ opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+ };
+
+ opp-2265600000 {
+ opp-hz = /bits/ 64 <2265600000>;
+ opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+ };
+
+ opp-2361600000 {
+ opp-hz = /bits/ 64 <2361600000>;
+ opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+ };
+
+ opp-2457600000 {
+ opp-hz = /bits/ 64 <2457600000>;
+ opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+ };
+
+ opp-2553600000 {
+ opp-hz = /bits/ 64 <2553600000>;
+ opp-peak-kBps = <(3196800 * 4) (1708800 * 32)>;
+ };
+ };
+
+ cpu4_opp_table: opp-table-cpu4 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1267200000 {
+ opp-hz = /bits/ 64 <1267200000>;
+ opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+ };
+
+ opp-1363200000 {
+ opp-hz = /bits/ 64 <1363200000>;
+ opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+ };
+
+ opp-1459200000 {
+ opp-hz = /bits/ 64 <1459200000>;
+ opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+ };
+
+ opp-1536000000 {
+ opp-hz = /bits/ 64 <1536000000>;
+ opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+ };
+
+ opp-1632000000 {
+ opp-hz = /bits/ 64 <1632000000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-1708800000 {
+ opp-hz = /bits/ 64 <1708800000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-1785600000 {
+ opp-hz = /bits/ 64 <1785600000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-1862400000 {
+ opp-hz = /bits/ 64 <1862400000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-1939200000 {
+ opp-hz = /bits/ 64 <1939200000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-2016000000 {
+ opp-hz = /bits/ 64 <2016000000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-2112000000 {
+ opp-hz = /bits/ 64 <2112000000>;
+ opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+ };
+
+ opp-2188800000 {
+ opp-hz = /bits/ 64 <2188800000>;
+ opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+ };
+
+ opp-2265600000 {
+ opp-hz = /bits/ 64 <2265600000>;
+ opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+ };
+
+ opp-2361600000 {
+ opp-hz = /bits/ 64 <2361600000>;
+ opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+ };
+
+ opp-2457600000 {
+ opp-hz = /bits/ 64 <2457600000>;
+ opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+ };
+
+ opp-2553600000 {
+ opp-hz = /bits/ 64 <2553600000>;
+ opp-peak-kBps = <(3196800 * 4) (1708800 * 32)>;
+ };
+ };
+
+ clk_virt: interconnect-clk-virt {
+ compatible = "qcom,sa8775p-clk-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mc_virt: interconnect-mc-virt {
+ compatible = "qcom,sa8775p-mc-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ qup_opp_table_100mhz: opp-table-qup100mhz {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+
soc: soc@0 {
+ gcc: clock-controller@100000 {
+ compatible = "qcom,sa8775p-gcc";
+ reg = <0x0 0x00100000 0x0 0xc7018>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>,
+ <&usb_0_qmpphy>,
+ <&usb_1_qmpphy>,
+ <0>,
+ <0>,
+ <0>,
+ <&pcie0_phy>,
+ <&pcie1_phy>,
+ <0>,
+ <0>,
+ <0>;
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ qupv3_id_2: geniqup@8c0000 {
+ clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+ clock-names = "m-ahb", "s-ahb";
+
+ i2c14: i2c@880000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c14_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi14: spi@880000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi14_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart14: serial@880000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart14_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ i2c15: i2c@884000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c15_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi15: spi@884000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi15_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart15: serial@884000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart15_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ i2c16: i2c@888000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c16_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi16: spi@888000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi16_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart16: serial@888000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart16_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ i2c17: i2c@88c000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c17_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi17: spi@88c000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi17_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart17: serial@88c000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart17_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ i2c18: i2c@890000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c18_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi18: spi@890000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi18_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart18: serial@890000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart18_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ i2c19: i2c@894000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c19_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi19: spi@894000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi19_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart19: serial@894000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart19_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ i2c20: i2c@898000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c20_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi20: spi@898000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi20_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart20: serial@898000 {
+ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart20_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+ };
+
+ qupv3_id_0: geniqup@9c0000 {
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+
+ i2c0: i2c@980000 {
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c0_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi0: spi@980000 {
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi0_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart0: serial@980000 {
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart0_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ i2c1: i2c@984000 {
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c1_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi1: spi@984000 {
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi1_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart1: serial@984000 {
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart1_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ i2c2: i2c@988000 {
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c2_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi2: spi@988000 {
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi2_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart2: serial@988000 {
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart2_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ i2c3: i2c@98c000 {
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c3_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi3: spi@98c000 {
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi3_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart3: serial@98c000 {
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart3_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ i2c4: i2c@990000 {
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c4_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi4: spi@990000 {
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi4_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart4: serial@990000 {
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart4_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ i2c5: i2c@994000 {
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c5_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi5: spi@994000 {
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi5_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart5: serial@994000 {
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart5_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+ };
+
+ qupv3_id_1: geniqup@ac0000 {
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+
+ i2c7: i2c@a80000 {
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c7_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi7: spi@a80000 {
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi7_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart7: serial@a80000 {
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ pinctrl-0 = <&qup_uart7_default>;
+ pinctrl-names = "default";
+ interconnect-names = "qup-core", "qup-config";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+ power-domains = <&rpmhpd SA8775P_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+ };
+
+ i2c8: i2c@a84000 {
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c8_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi8: spi@a84000 {
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi8_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart8: serial@a84000 {
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ pinctrl-0 = <&qup_uart8_default>;
+ pinctrl-names = "default";
+ interconnect-names = "qup-core", "qup-config";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+ power-domains = <&rpmhpd SA8775P_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+ };
+
+ i2c9: i2c@a88000 {
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c9_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi9: spi@a88000 {
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi9_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart9: serial@a88000 {
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart9_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ i2c10: i2c@a8c000 {
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c10_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi10: spi@a8c000 {
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi10_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart10: serial@a8c000 {
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ pinctrl-0 = <&qup_uart10_default>;
+ pinctrl-names = "default";
+ interconnect-names = "qup-core", "qup-config";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0
+ &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0
+ &config_noc SLAVE_QUP_1 0>;
+ power-domains = <&rpmhpd SA8775P_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+ };
+
+ i2c11: i2c@a90000 {
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c11_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi11: spi@a90000 {
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi11_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart11: serial@a90000 {
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-0 = <&qup_uart11_default>;
+ pinctrl-names = "default";
+ interconnect-names = "qup-core", "qup-config";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+ power-domains = <&rpmhpd SA8775P_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+ };
+
+ i2c12: i2c@a94000 {
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c12_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi12: spi@a94000 {
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi12_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart12: serial@a94000 {
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart12_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ i2c13: i2c@a98000 {
+ clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c13_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+ };
+
+ qupv3_id_3: geniqup@bc0000 {
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_3_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_3_S_AHB_CLK>;
+
+ i2c21: i2c@b80000 {
+ clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c21_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ spi21: spi@b80000 {
+ clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi21_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ };
+
+ uart21: serial@b80000 {
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+ interconnect-names = "qup-core", "qup-config";
+ pinctrl-0 = <&qup_uart21_default>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>;
+ power-domains = <&rpmhpd SA8775P_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+ };
+ };
+
+ config_noc: interconnect@14c0000 {
+ compatible = "qcom,sa8775p-config-noc";
+ reg = <0x0 0x014c0000 0x0 0x13080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ system_noc: interconnect@1680000 {
+ compatible = "qcom,sa8775p-system-noc";
+ reg = <0x0 0x01680000 0x0 0x15080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre1_noc: interconnect@16c0000 {
+ compatible = "qcom,sa8775p-aggre1-noc";
+ reg = <0x0 0x016c0000 0x0 0x18080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_QUPV3_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>;
+ };
+
+ aggre2_noc: interconnect@1700000 {
+ compatible = "qcom,sa8775p-aggre2-noc";
+ reg = <0x0 0x01700000 0x0 0x1b080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ clocks = <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>,
+ <&rpmhcc RPMH_IPA_CLK>;
+ };
+
+ pcie_anoc: interconnect@1760000 {
+ compatible = "qcom,sa8775p-pcie-anoc";
+ reg = <0x0 0x01760000 0x0 0xc080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ gpdsp_anoc: interconnect@1780000 {
+ compatible = "qcom,sa8775p-gpdsp-anoc";
+ reg = <0x0 0x01780000 0x0 0xe080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mmss_noc: interconnect@17a0000 {
+ compatible = "qcom,sa8775p-mmss-noc";
+ reg = <0x0 0x017a0000 0x0 0x40000>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ pcie0: pcie@1c00000 {
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a";
+
+ assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+
+ resets = <&gcc GCC_PCIE_0_BCR>,
+ <&gcc GCC_PCIE_0_LINK_DOWN_BCR>;
+ reset-names = "pci",
+ "link_down";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+
+ phys = <&pcie0_phy>;
+ phy-names = "pciephy";
+ };
+
+ pcie0_ep: pcie-ep@1c00000 {
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a";
+
+ interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "core";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+
+ phys = <&pcie0_phy>;
+ phy-names = "pciephy";
+ };
+
+ pcie0_phy: phy@1c04000 {
+ compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy";
+ reg = <0x0 0x1c04000 0x0 0x2000>;
+
+ clocks = <&gcc GCC_PCIE_0_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_CLKREF_EN>,
+ <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>,
+ <&gcc GCC_PCIE_0_PIPEDIV2_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "rchng",
+ "pipe",
+ "pipediv2";
+
+ assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+ reset-names = "phy";
+
+ #clock-cells = <0>;
+ clock-output-names = "pcie_0_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ pcie1: pcie@1c10000 {
+ clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a";
+
+ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+
+ resets = <&gcc GCC_PCIE_1_BCR>,
+ <&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
+ reset-names = "pci",
+ "link_down";
+
+ power-domains = <&gcc PCIE_1_GDSC>;
+
+ phys = <&pcie1_phy>;
+ phy-names = "pciephy";
+ };
+
+ pcie1_ep: pcie-ep@1c10000 {
+ clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a";
+
+ interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+
+ resets = <&gcc GCC_PCIE_1_BCR>;
+ reset-names = "core";
+
+ power-domains = <&gcc PCIE_1_GDSC>;
+
+ phys = <&pcie1_phy>;
+ phy-names = "pciephy";
+ };
+
+ pcie1_phy: phy@1c14000 {
+ compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy";
+ reg = <0x0 0x1c14000 0x0 0x4000>;
+
+ clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_CLKREF_EN>,
+ <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+ <&gcc GCC_PCIE_1_PIPE_CLK>,
+ <&gcc GCC_PCIE_1_PIPEDIV2_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "rchng",
+ "pipe",
+ "pipediv2";
+
+ assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+ reset-names = "phy";
+
+ #clock-cells = <0>;
+ clock-output-names = "pcie_1_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ ufs_mem_hc: ufshc@1d84000 {
+ phys = <&ufs_mem_phy>;
+ phy-names = "ufsphy";
+ #reset-cells = <1>;
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+ power-domains = <&gcc UFS_PHY_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+ clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ clock-names = "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ freq-table-hz = <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+ qcom,ice = <&ice>;
+ };
+
+ ufs_mem_phy: phy@1d87000 {
+ compatible = "qcom,sa8775p-qmp-ufs-phy";
+ reg = <0x0 0x01d87000 0x0 0xe10>;
+ /*
+ * Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It
+ * enables the CXO clock to eDP *and* UFS PHY.
+ */
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+ <&gcc GCC_EDP_REF_CLKREF_EN>;
+ clock-names = "ref", "ref_aux", "qref";
+ power-domains = <&gcc UFS_PHY_GDSC>;
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ ice: crypto@1d88000 {
+ compatible = "qcom,sa8775p-inline-crypto-engine",
+ "qcom,inline-crypto-engine";
+ reg = <0x0 0x01d88000 0x0 0x18000>;
+ clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+ };
+
+ crypto: crypto@1dfa000 {
+ interconnects = <&aggre2_noc MASTER_CRYPTO_CORE0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "memory";
+ };
+
+ lpass_ag_noc: interconnect@3c40000 {
+ compatible = "qcom,sa8775p-lpass-ag-noc";
+ reg = <0x0 0x03c40000 0x0 0x17200>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ sdhc: mmc@87c4000 {
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>;
+ clock-names = "iface",
+ "core";
+
+ interconnects = <&aggre1_noc MASTER_SDC QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_SDC1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "sdhc-ddr",
+ "cpu-sdhc";
+
+ operating-points-v2 = <&sdhc_opp_table>;
+ power-domains = <&rpmhpd SA8775P_CX>;
+ resets = <&gcc GCC_SDCC1_BCR>;
+
+ sdhc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <1800000 400000>;
+ opp-avg-kBps = <100000 0>;
+ };
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ opp-peak-kBps = <5400000 1600000>;
+ opp-avg-kBps = <390000 0>;
+ };
+ };
+ };
+
+ usb_0_hsphy: phy@88e4000 {
+ compatible = "qcom,sa8775p-usb-hs-phy",
+ "qcom,usb-snps-hs-5nm-phy";
+ reg = <0 0x088e4000 0 0x120>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+ resets = <&gcc GCC_USB2_PHY_PRIM_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_1_hsphy: phy@88e6000 {
+ compatible = "qcom,sa8775p-usb-hs-phy",
+ "qcom,usb-snps-hs-5nm-phy";
+ reg = <0 0x088e6000 0 0x120>;
+ clocks = <&gcc GCC_USB_CLKREF_EN>;
+ clock-names = "ref";
+ resets = <&gcc GCC_USB2_PHY_SEC_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_2_hsphy: phy@88e7000 {
+ compatible = "qcom,sa8775p-usb-hs-phy",
+ "qcom,usb-snps-hs-5nm-phy";
+ reg = <0 0x088e7000 0 0x120>;
+ clocks = <&gcc GCC_USB_CLKREF_EN>;
+ clock-names = "ref";
+ resets = <&gcc GCC_USB3_PHY_TERT_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_0_qmpphy: phy@88e8000 {
+ compatible = "qcom,sa8775p-qmp-usb3-uni-phy";
+ reg = <0 0x088e8000 0 0x2000>;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&gcc GCC_USB_CLKREF_EN>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux", "ref", "com_aux", "pipe";
+
+ resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+ <&gcc GCC_USB3PHY_PHY_PRIM_BCR>;
+ reset-names = "phy", "phy_phy";
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "usb3_prim_phy_pipe_clk_src";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_1_qmpphy: phy@88ea000 {
+ compatible = "qcom,sa8775p-qmp-usb3-uni-phy";
+ reg = <0 0x088ea000 0 0x2000>;
+
+ clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+ <&gcc GCC_USB_CLKREF_EN>,
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+ clock-names = "aux", "ref", "com_aux", "pipe";
+
+ resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+ <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+ reset-names = "phy", "phy_phy";
+
+ power-domains = <&gcc USB30_SEC_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "usb3_sec_phy_pipe_clk_src";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ refgen: regulator@891c000 {
+ compatible = "qcom,sa8775p-refgen-regulator",
+ "qcom,sm8250-refgen-regulator";
+ reg = <0x0 0x0891c000 0x0 0x84>;
+ };
+
+ dc_noc: interconnect@90e0000 {
+ compatible = "qcom,sa8775p-dc-noc";
+ reg = <0x0 0x090e0000 0x0 0x5080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ gem_noc: interconnect@9100000 {
+ compatible = "qcom,sa8775p-gem-noc";
+ reg = <0x0 0x09100000 0x0 0xf6080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ usb_0: usb@a600000 {
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ phys = <&usb_0_hsphy>, <&usb_0_qmpphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+
+ usb_1: usb@a800000 {
+ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_USB30_SEC_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+ <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SEC_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ power-domains = <&gcc USB30_SEC_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_SEC_BCR>;
+
+ interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ phys = <&usb_1_hsphy>, <&usb_1_qmpphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+
+ usb_2: usb@a400000 {
+ clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
+ <&gcc GCC_USB20_SLEEP_CLK>,
+ <&gcc GCC_USB20_MOCK_UTMI_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ power-domains = <&gcc USB20_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB20_PRIM_BCR>;
+
+ interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ phys = <&usb_2_hsphy>;
+ phy-names = "usb2-phy";
+ };
+
+ gpu: gpu@3d00000 {
+ operating-points-v2 = <&gpu_opp_table>;
+ qcom,gmu = <&gmu>;
+ interconnects = <&gem_noc MASTER_GFX3D QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "gfx-mem";
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-405000000 {
+ opp-hz = /bits/ 64 <405000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ opp-peak-kBps = <5285156>;
+ opp-supported-hw = <0x3>;
+ };
+
+ opp-530000000 {
+ opp-hz = /bits/ 64 <530000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ opp-peak-kBps = <12484375>;
+ opp-supported-hw = <0x2>;
+ };
+
+ opp-676000000 {
+ opp-hz = /bits/ 64 <676000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ opp-peak-kBps = <8171875>;
+ opp-supported-hw = <0x1>;
+ };
+
+ opp-778000000 {
+ opp-hz = /bits/ 64 <778000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ opp-peak-kBps = <10687500>;
+ opp-supported-hw = <0x1>;
+ };
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ opp-peak-kBps = <12484375>;
+ opp-supported-hw = <0x1>;
+ };
+ };
+ };
+
+ gmu: gmu@3d6a000 {
+ compatible = "qcom,adreno-gmu-663.0", "qcom,adreno-gmu";
+ reg = <0x0 0x03d6a000 0x0 0x34000>,
+ <0x0 0x03de0000 0x0 0x10000>,
+ <0x0 0x0b290000 0x0 0x10000>;
+ reg-names = "gmu", "rscc", "gmu_pdc";
+ interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hfi", "gmu";
+ clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_CXO_CLK>,
+ <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gpucc GPU_CC_AHB_CLK>,
+ <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+ <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
+ clock-names = "gmu",
+ "cxo",
+ "axi",
+ "memnoc",
+ "ahb",
+ "hub",
+ "smmu_vote";
+ power-domains = <&gpucc GPU_CC_CX_GDSC>,
+ <&gpucc GPU_CC_GX_GDSC>;
+ power-domain-names = "cx",
+ "gx";
+ iommus = <&adreno_smmu 5 0xc00>;
+ operating-points-v2 = <&gmu_opp_table>;
+
+ gmu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+ };
+ };
+
+ gpucc: clock-controller@3d90000 {
+ compatible = "qcom,sa8775p-gpucc";
+ reg = <0x0 0x03d90000 0x0 0xa000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+ clock-names = "bi_tcxo",
+ "gcc_gpu_gpll0_clk_src",
+ "gcc_gpu_gpll0_div_clk_src";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ adreno_smmu: iommu@3da0000 {
+ power-domains = <&gpucc GPU_CC_CX_GDSC>;
+ clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+ <&gpucc GPU_CC_AHB_CLK>,
+ <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+ <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+ <&gpucc GPU_CC_HUB_AON_CLK>;
+ clock-names = "gcc_gpu_memnoc_gfx_clk",
+ "gcc_gpu_snoc_dvm_gfx_clk",
+ "gpu_cc_ahb_clk",
+ "gpu_cc_hlos1_vote_gpu_smmu_clk",
+ "gpu_cc_cx_gmu_clk",
+ "gpu_cc_hub_cx_int_clk",
+ "gpu_cc_hub_aon_clk";
+ };
+
+ serdes0: phy@8901000 {
+ compatible = "qcom,sa8775p-dwmac-sgmii-phy";
+ reg = <0x0 0x08901000 0x0 0xe10>;
+ clocks = <&gcc GCC_SGMI_CLKREF_EN>;
+ clock-names = "sgmi_ref";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ serdes1: phy@8902000 {
+ compatible = "qcom,sa8775p-dwmac-sgmii-phy";
+ reg = <0x0 0x08902000 0x0 0xe10>;
+ clocks = <&gcc GCC_SGMI_CLKREF_EN>;
+ clock-names = "sgmi_ref";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ pmu@9091000 {
+ compatible = "qcom,sa8775p-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+ reg = <0x0 0x9091000 0x0 0x1000>;
+ interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+ operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+ llcc_bwmon_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-0 {
+ opp-peak-kBps = <762000>;
+ };
+
+ opp-1 {
+ opp-peak-kBps = <1720000>;
+ };
+
+ opp-2 {
+ opp-peak-kBps = <2086000>;
+ };
+
+ opp-3 {
+ opp-peak-kBps = <2601000>;
+ };
+
+ opp-4 {
+ opp-peak-kBps = <2929000>;
+ };
+
+ opp-5 {
+ opp-peak-kBps = <5931000>;
+ };
+
+ opp-6 {
+ opp-peak-kBps = <6515000>;
+ };
+
+ opp-7 {
+ opp-peak-kBps = <7984000>;
+ };
+
+ opp-8 {
+ opp-peak-kBps = <10437000>;
+ };
+
+ opp-9 {
+ opp-peak-kBps = <12195000>;
+ };
+ };
+ };
+
+ pmu@90b5400 {
+ compatible = "qcom,sa8775p-cpu-bwmon", "qcom,sdm845-bwmon";
+ reg = <0x0 0x90b5400 0x0 0x600>;
+ interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+ operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+ cpu_bwmon_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-0 {
+ opp-peak-kBps = <9155000>;
+ };
+
+ opp-1 {
+ opp-peak-kBps = <12298000>;
+ };
+
+ opp-2 {
+ opp-peak-kBps = <14236000>;
+ };
+
+ opp-3 {
+ opp-peak-kBps = <16265000>;
+ };
+ };
+
+ };
+
+ pmu@90b6400 {
+ compatible = "qcom,sa8775p-cpu-bwmon", "qcom,sdm845-bwmon";
+ reg = <0x0 0x90b6400 0x0 0x600>;
+ interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+ operating-points-v2 = <&cpu_bwmon_opp_table>;
+ };
+
+ iris: video-codec@aa00000 {
+ power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+ <&videocc VIDEO_CC_MVS0_GDSC>,
+ <&rpmhpd SA8775P_MX>,
+ <&rpmhpd SA8775P_MMCX>;
+ power-domain-names = "venus",
+ "vcodec0",
+ "mxc",
+ "mmcx";
+ operating-points-v2 = <&iris_opp_table>;
+
+ clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+ <&videocc VIDEO_CC_MVS0C_CLK>,
+ <&videocc VIDEO_CC_MVS0_CLK>;
+ clock-names = "iface",
+ "core",
+ "vcodec0_core";
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "cpu-cfg",
+ "video-mem";
+
+ iris_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-366000000 {
+ opp-hz = /bits/ 64 <366000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>,
+ <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-444000000 {
+ opp-hz = /bits/ 64 <444000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>,
+ <&rpmhpd_opp_nom>;
+ };
+
+ opp-533000000 {
+ opp-hz = /bits/ 64 <533000000>;
+ required-opps = <&rpmhpd_opp_nom>,
+ <&rpmhpd_opp_turbo>;
+ };
+
+ opp-560000000 {
+ opp-hz = /bits/ 64 <560000000>;
+ required-opps = <&rpmhpd_opp_nom>,
+ <&rpmhpd_opp_turbo_l1>;
+ };
+ };
+ };
+
+ iris: video-codec@aa00000 {
+ resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
+ reset-names = "bus";
+ };
+
+ videocc: clock-controller@abf0000 {
+ compatible = "qcom,sa8775p-videocc";
+ reg = <0x0 0x0abf0000 0x0 0x10000>;
+ clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>;
+ power-domains = <&rpmhpd SA8775P_MMCX>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ cci0: cci@ac13000 {
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_0_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci0_0_default &cci0_1_default>;
+ pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cci0_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci0_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+
+ cci1: cci@ac14000 {
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_1_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci1_0_default &cci1_1_default>;
+ pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cci1_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci1_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci2: cci@ac15000 {
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_2_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci2_0_default &cci2_1_default>;
+ pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cci2_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci2_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci3: cci@ac16000 {
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_3_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci3_0_default &cci3_1_default>;
+ pinctrl-1 = <&cci3_0_sleep &cci3_1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cci3_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci3_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ camss: isp@ac78000 {
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CORE_AHB_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+ <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+ <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+ <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+ <&camcc CAM_CC_CSID_CLK>,
+ <&camcc CAM_CC_CSIPHY0_CLK>,
+ <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY1_CLK>,
+ <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY2_CLK>,
+ <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY3_CLK>,
+ <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&gcc GCC_CAMERA_SF_AXI_CLK>,
+ <&camcc CAM_CC_ICP_AHB_CLK>,
+ <&camcc CAM_CC_IFE_0_CLK>,
+ <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+ <&camcc CAM_CC_IFE_1_CLK>,
+ <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CLK>,
+ <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+ clock-names = "camnoc_axi",
+ "core_ahb",
+ "cpas_ahb",
+ "cpas_fast_ahb_clk",
+ "cpas_vfe_lite",
+ "cpas_vfe0",
+ "cpas_vfe1",
+ "csid",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "csiphy_rx",
+ "gcc_axi_hf",
+ "gcc_axi_sf",
+ "icp_ahb",
+ "vfe0",
+ "vfe0_fast_ahb",
+ "vfe1",
+ "vfe1_fast_ahb",
+ "vfe_lite",
+ "vfe_lite_ahb",
+ "vfe_lite_cphy_rx",
+ "vfe_lite_csid";
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "ahb",
+ "hf_0";
+
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ power-domain-names = "top";
+ };
+
+ camcc: clock-controller@ade0000 {
+ compatible = "qcom,sa8775p-camcc";
+ reg = <0x0 0x0ade0000 0x0 0x20000>;
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>;
+ power-domains = <&rpmhpd SA8775P_MMCX>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ mdss0: display-subsystem@ae00000 {
+ /* same path used twice */
+ interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&mmss_noc MASTER_MDP1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "mdp0-mem",
+ "mdp1-mem",
+ "cpu-cfg";
+
+ resets = <&dispcc0 MDSS_DISP_CC_MDSS_CORE_BCR>;
+
+ power-domains = <&dispcc0 MDSS_DISP_CC_MDSS_CORE_GDSC>;
+
+ clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>;
+
+ mdss0_mdp: display-controller@ae01000 {
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdss0_mdp_opp_table>;
+ power-domains = <&rpmhpd SA8775P_MMCX>;
+
+ mdss0_mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-575000000 {
+ opp-hz = /bits/ 64 <575000000>;
+ required-opps = <&rpmhpd_opp_turbo>;
+ };
+
+ opp-650000000 {
+ opp-hz = /bits/ 64 <650000000>;
+ required-opps = <&rpmhpd_opp_turbo_l1>;
+ };
+ };
+ };
+
+ mdss0_dsi0: dsi@ae94000 {
+ clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss0_dsi0_phy DSI_BYTE_PLL_CLK>,
+ <&mdss0_dsi0_phy DSI_PIXEL_PLL_CLK>;
+ phys = <&mdss0_dsi0_phy>;
+
+ operating-points-v2 = <&mdss_dsi_opp_table>;
+ power-domains = <&rpmhpd SA8775P_MMCX>;
+
+ refgen-supply = <&refgen>;
+
+ mdss_dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ mdss0_dsi0_phy: phy@ae94400 {
+ compatible = "qcom,sa8775p-dsi-phy-5nm";
+ reg = <0x0 0x0ae94400 0x0 0x200>,
+ <0x0 0x0ae94600 0x0 0x280>,
+ <0x0 0x0ae94900 0x0 0x27c>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+
+ mdss0_dsi1: dsi@ae96000 {
+ clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&mdss0_dsi1_phy DSI_BYTE_PLL_CLK>,
+ <&mdss0_dsi1_phy DSI_PIXEL_PLL_CLK>;
+ phys = <&mdss0_dsi1_phy>;
+
+ operating-points-v2 = <&mdss_dsi_opp_table>;
+ power-domains = <&rpmhpd SA8775P_MMCX>;
+
+ refgen-supply = <&refgen>;
+ };
+
+ mdss0_dsi1_phy: phy@ae96400 {
+ compatible = "qcom,sa8775p-dsi-phy-5nm";
+ reg = <0x0 0x0ae96400 0x0 0x200>,
+ <0x0 0x0ae96600 0x0 0x280>,
+ <0x0 0x0ae96900 0x0 0x27c>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+
+ mdss0_dp0_phy: phy@aec2a00 {
+ compatible = "qcom,sa8775p-edp-phy";
+
+ reg = <0x0 0x0aec2a00 0x0 0x200>,
+ <0x0 0x0aec2200 0x0 0xd0>,
+ <0x0 0x0aec2600 0x0 0xd0>,
+ <0x0 0x0aec2000 0x0 0x1c8>;
+
+ clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>;
+ clock-names = "aux",
+ "cfg_ahb";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ mdss0_dp1_phy: phy@aec5a00 {
+ compatible = "qcom,sa8775p-edp-phy";
+
+ reg = <0x0 0x0aec5a00 0x0 0x200>,
+ <0x0 0x0aec5200 0x0 0xd0>,
+ <0x0 0x0aec5600 0x0 0xd0>,
+ <0x0 0x0aec5000 0x0 0x1c8>;
+
+ clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>;
+ clock-names = "aux",
+ "cfg_ahb";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ mdss0_dp0: displayport-controller@af54000 {
+ clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel",
+ "stream_1_pixel",
+ "stream_2_pixel",
+ "stream_3_pixel";
+ assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK_SRC>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK_SRC>;
+ assigned-clock-parents = <&mdss0_dp0_phy 0>,
+ <&mdss0_dp0_phy 1>,
+ <&mdss0_dp0_phy 1>,
+ <&mdss0_dp0_phy 1>,
+ <&mdss0_dp0_phy 1>;
+ phys = <&mdss0_dp0_phy>;
+ phy-names = "dp";
+
+ operating-points-v2 = <&dp_opp_table>;
+ power-domains = <&rpmhpd SA8775P_MMCX>;
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-162000000 {
+ opp-hz = /bits/ 64 <162000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss0_dp1: displayport-controller@af5c000 {
+ clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel",
+ "stream_1_pixel";
+ assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
+ assigned-clock-parents = <&mdss0_dp1_phy 0>,
+ <&mdss0_dp1_phy 1>,
+ <&mdss0_dp1_phy 1>;
+ phys = <&mdss0_dp1_phy>;
+ phy-names = "dp";
+
+ operating-points-v2 = <&dp1_opp_table>;
+ power-domains = <&rpmhpd SA8775P_MMCX>;
+
+ dp1_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-162000000 {
+ opp-hz = /bits/ 64 <162000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+ };
+
+ dispcc0: clock-controller@af00000 {
+ compatible = "qcom,sa8775p-dispcc0";
+ reg = <0x0 0x0af00000 0x0 0x20000>;
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>,
+ <&mdss0_dp0_phy 0>, <&mdss0_dp0_phy 1>,
+ <&mdss0_dp1_phy 0>, <&mdss0_dp1_phy 1>,
+ <&mdss0_dsi0_phy DSI_BYTE_PLL_CLK>,
+ <&mdss0_dsi0_phy DSI_PIXEL_PLL_CLK>,
+ <&mdss0_dsi1_phy DSI_BYTE_PLL_CLK>,
+ <&mdss0_dsi1_phy DSI_PIXEL_PLL_CLK>;
+ power-domains = <&rpmhpd SA8775P_MMCX>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
tlmm: pinctrl@f000000 {
dp0_hot_plug_det: dp0-hot-plug-det-state {
pins = "gpio101";
@@ -814,5 +3465,247 @@ data-pins {
};
};
};
+
+ apps_rsc: rsc@18200000 {
+ compatible = "qcom,rpmh-rsc";
+ reg = <0x0 0x18200000 0x0 0x10000>,
+ <0x0 0x18210000 0x0 0x10000>,
+ <0x0 0x18220000 0x0 0x10000>;
+ reg-names = "drv-0", "drv-1", "drv-2";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 2>,
+ <SLEEP_TCS 3>,
+ <WAKE_TCS 3>,
+ <CONTROL_TCS 0>;
+ label = "apps_rsc";
+ power-domains = <&system_pd>;
+
+ apps_bcm_voter: bcm-voter {
+ compatible = "qcom,bcm-voter";
+ };
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,sa8775p-rpmh-clk";
+ #clock-cells = <1>;
+ clock-names = "xo";
+ clocks = <&xo_board_clk>;
+ };
+
+ rpmhpd: power-controller {
+ compatible = "qcom,sa8775p-rpmhpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmhpd_opp_ret: opp-0 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
+
+ rpmhpd_opp_min_svs: opp-1 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+
+ rpmhpd_opp_low_svs: opp2 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ rpmhpd_opp_svs: opp3 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ rpmhpd_opp_svs_l1: opp-4 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ rpmhpd_opp_nom: opp-5 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ rpmhpd_opp_nom_l1: opp-6 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ rpmhpd_opp_nom_l2: opp-7 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
+
+ rpmhpd_opp_turbo: opp-8 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ rpmhpd_opp_turbo_l1: opp-9 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+ };
+ };
+ };
+
+ epss_l3_cl0: interconnect@18590000 {
+ compatible = "qcom,sa8775p-epss-l3",
+ "qcom,epss-l3";
+ reg = <0x0 0x18590000 0x0 0x1000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+ clock-names = "xo", "alternate";
+ #interconnect-cells = <1>;
+ };
+
+ cpufreq_hw: cpufreq@18591000 {
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+ clock-names = "xo", "alternate";
+ };
+
+ epss_l3_cl1: interconnect@18592000 {
+ compatible = "qcom,sa8775p-epss-l3",
+ "qcom,epss-l3";
+ reg = <0x0 0x18592000 0x0 0x1000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+ clock-names = "xo", "alternate";
+ #interconnect-cells = <1>;
+ };
+
+ remoteproc_gpdsp0: remoteproc@20c00000 {
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SA8775P_CX>,
+ <&rpmhpd SA8775P_MXC>;
+ power-domain-names = "cx", "mxc";
+
+ interconnects = <&gpdsp_anoc MASTER_DSP0 0
+ &config_noc SLAVE_CLK_CTL 0>;
+ };
+
+ remoteproc_gpdsp1: remoteproc@21c00000 {
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SA8775P_CX>,
+ <&rpmhpd SA8775P_MXC>;
+ power-domain-names = "cx", "mxc";
+
+ interconnects = <&gpdsp_anoc MASTER_DSP1 0
+ &config_noc SLAVE_CLK_CTL 0>;
+ };
+
+ dispcc1: clock-controller@22100000 {
+ compatible = "qcom,sa8775p-dispcc1";
+ reg = <0x0 0x22100000 0x0 0x20000>;
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>,
+ <0>, <0>, <0>, <0>,
+ <0>, <0>, <0>, <0>;
+ power-domains = <&rpmhpd SA8775P_MMCX>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ status = "disabled";
+ };
+
+ ethernet1: ethernet@23000000 {
+ clocks = <&gcc GCC_EMAC1_AXI_CLK>,
+ <&gcc GCC_EMAC1_SLV_AHB_CLK>,
+ <&gcc GCC_EMAC1_PTP_CLK>,
+ <&gcc GCC_EMAC1_PHY_AUX_CLK>;
+ clock-names = "stmmaceth",
+ "pclk",
+ "ptp_ref",
+ "phyaux";
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_EMAC1_CFG QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_EMAC_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "cpu-mac",
+ "mac-mem";
+
+ power-domains = <&gcc EMAC1_GDSC>;
+
+ phys = <&serdes1>;
+ phy-names = "serdes";
+ };
+
+ ethernet0: ethernet@23040000 {
+ clocks = <&gcc GCC_EMAC0_AXI_CLK>,
+ <&gcc GCC_EMAC0_SLV_AHB_CLK>,
+ <&gcc GCC_EMAC0_PTP_CLK>,
+ <&gcc GCC_EMAC0_PHY_AUX_CLK>;
+ clock-names = "stmmaceth",
+ "pclk",
+ "ptp_ref",
+ "phyaux";
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_EMAC_CFG QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_EMAC QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "cpu-mac",
+ "mac-mem";
+
+ power-domains = <&gcc EMAC0_GDSC>;
+
+ phys = <&serdes0>;
+ phy-names = "serdes";
+ };
+
+ nspa_noc: interconnect@260c0000 {
+ compatible = "qcom,sa8775p-nspa-noc";
+ reg = <0x0 0x260c0000 0x0 0x16080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ remoteproc_cdsp0: remoteproc@26300000 {
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SA8775P_CX>,
+ <&rpmhpd SA8775P_MXC>,
+ <&rpmhpd SA8775P_NSP0>;
+ power-domain-names = "cx", "mxc", "nsp";
+
+ interconnects = <&nspa_noc MASTER_CDSP_PROC 0
+ &mc_virt SLAVE_EBI1 0>;
+ };
+
+ nspb_noc: interconnect@2a0c0000 {
+ compatible = "qcom,sa8775p-nspb-noc";
+ reg = <0x0 0x2a0c0000 0x0 0x16080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ remoteproc_cdsp1: remoteproc@2a300000 {
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SA8775P_CX>,
+ <&rpmhpd SA8775P_MXC>,
+ <&rpmhpd SA8775P_NSP1>;
+ power-domain-names = "cx", "mxc", "nsp";
+
+ interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0
+ &mc_virt SLAVE_EBI1 0>;
+ };
+
+ remoteproc_adsp: remoteproc@30000000 {
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SA8775P_LCX>,
+ <&rpmhpd SA8775P_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ interconnects = <&lpass_ag_noc MASTER_LPASS_PROC 0
+ &mc_virt SLAVE_EBI1 0>;
+
+ };
};
};
diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index fa2f20a7b11f..099754e3bdfa 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -4,23 +4,11 @@
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
-#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
-#include <dt-bindings/clock/qcom,rpmh.h>
-#include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
-#include <dt-bindings/clock/qcom,sa8775p-gcc.h>
-#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
-#include <dt-bindings/clock/qcom,sa8775p-videocc.h>
-#include <dt-bindings/clock/qcom,sa8775p-camcc.h>
#include <dt-bindings/dma/qcom-gpi.h>
-#include <dt-bindings/interconnect/qcom,osm-l3.h>
-#include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/firmware/qcom,scm.h>
-#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,gpr.h>
-#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/thermal/thermal.h>
/ {
@@ -29,18 +17,6 @@ / {
#address-cells = <2>;
#size-cells = <2>;
- clocks {
- xo_board_clk: xo-board-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- };
-
- sleep_clk: sleep-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- };
- };
-
cpus {
#address-cells = <2>;
#size-cells = <0>;
@@ -57,11 +33,6 @@ cpu0: cpu@0 {
capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
dynamic-power-coefficient = <100>;
- operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
- <&epss_l3_cl0 MASTER_EPSS_L3_APPS
- &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
l2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
@@ -87,11 +58,6 @@ cpu1: cpu@100 {
capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
dynamic-power-coefficient = <100>;
- operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
- <&epss_l3_cl0 MASTER_EPSS_L3_APPS
- &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
l2_1: l2-cache {
compatible = "cache";
cache-level = <2>;
@@ -112,11 +78,6 @@ cpu2: cpu@200 {
capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
dynamic-power-coefficient = <100>;
- operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
- <&epss_l3_cl0 MASTER_EPSS_L3_APPS
- &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
l2_2: l2-cache {
compatible = "cache";
cache-level = <2>;
@@ -137,11 +98,6 @@ cpu3: cpu@300 {
capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
dynamic-power-coefficient = <100>;
- operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
- <&epss_l3_cl0 MASTER_EPSS_L3_APPS
- &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
l2_3: l2-cache {
compatible = "cache";
cache-level = <2>;
@@ -162,11 +118,6 @@ cpu4: cpu@10000 {
capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
dynamic-power-coefficient = <100>;
- operating-points-v2 = <&cpu4_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
- <&epss_l3_cl1 MASTER_EPSS_L3_APPS
- &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
l2_4: l2-cache {
compatible = "cache";
cache-level = <2>;
@@ -193,11 +144,6 @@ cpu5: cpu@10100 {
capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
dynamic-power-coefficient = <100>;
- operating-points-v2 = <&cpu4_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
- <&epss_l3_cl1 MASTER_EPSS_L3_APPS
- &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
l2_5: l2-cache {
compatible = "cache";
cache-level = <2>;
@@ -218,11 +164,6 @@ cpu6: cpu@10200 {
capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
dynamic-power-coefficient = <100>;
- operating-points-v2 = <&cpu4_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
- <&epss_l3_cl1 MASTER_EPSS_L3_APPS
- &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
l2_6: l2-cache {
compatible = "cache";
cache-level = <2>;
@@ -243,11 +184,6 @@ cpu7: cpu@10300 {
capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
dynamic-power-coefficient = <100>;
- operating-points-v2 = <&cpu4_opp_table>;
- interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
- <&epss_l3_cl1 MASTER_EPSS_L3_APPS
- &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
l2_7: l2-cache {
compatible = "cache";
cache-level = <2>;
@@ -337,176 +273,6 @@ cluster_sleep_apss_rsc_pc: cluster-sleep-1 {
};
};
- cpu0_opp_table: opp-table-cpu0 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp-1267200000 {
- opp-hz = /bits/ 64 <1267200000>;
- opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
- };
-
- opp-1363200000 {
- opp-hz = /bits/ 64 <1363200000>;
- opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
- };
-
- opp-1459200000 {
- opp-hz = /bits/ 64 <1459200000>;
- opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
- };
-
- opp-1536000000 {
- opp-hz = /bits/ 64 <1536000000>;
- opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
- };
-
- opp-1632000000 {
- opp-hz = /bits/ 64 <1632000000>;
- opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
- };
-
- opp-1708800000 {
- opp-hz = /bits/ 64 <1708800000>;
- opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
- };
-
- opp-1785600000 {
- opp-hz = /bits/ 64 <1785600000>;
- opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
- };
-
- opp-1862400000 {
- opp-hz = /bits/ 64 <1862400000>;
- opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
- };
-
- opp-1939200000 {
- opp-hz = /bits/ 64 <1939200000>;
- opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
- };
-
- opp-2016000000 {
- opp-hz = /bits/ 64 <2016000000>;
- opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
- };
-
- opp-2112000000 {
- opp-hz = /bits/ 64 <2112000000>;
- opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
- };
-
- opp-2188800000 {
- opp-hz = /bits/ 64 <2188800000>;
- opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
- };
-
- opp-2265600000 {
- opp-hz = /bits/ 64 <2265600000>;
- opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
- };
-
- opp-2361600000 {
- opp-hz = /bits/ 64 <2361600000>;
- opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
- };
-
- opp-2457600000 {
- opp-hz = /bits/ 64 <2457600000>;
- opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
- };
-
- opp-2553600000 {
- opp-hz = /bits/ 64 <2553600000>;
- opp-peak-kBps = <(3196800 * 4) (1708800 * 32)>;
- };
- };
-
- cpu4_opp_table: opp-table-cpu4 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp-1267200000 {
- opp-hz = /bits/ 64 <1267200000>;
- opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
- };
-
- opp-1363200000 {
- opp-hz = /bits/ 64 <1363200000>;
- opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
- };
-
- opp-1459200000 {
- opp-hz = /bits/ 64 <1459200000>;
- opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
- };
-
- opp-1536000000 {
- opp-hz = /bits/ 64 <1536000000>;
- opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
- };
-
- opp-1632000000 {
- opp-hz = /bits/ 64 <1632000000>;
- opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
- };
-
- opp-1708800000 {
- opp-hz = /bits/ 64 <1708800000>;
- opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
- };
-
- opp-1785600000 {
- opp-hz = /bits/ 64 <1785600000>;
- opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
- };
-
- opp-1862400000 {
- opp-hz = /bits/ 64 <1862400000>;
- opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
- };
-
- opp-1939200000 {
- opp-hz = /bits/ 64 <1939200000>;
- opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
- };
-
- opp-2016000000 {
- opp-hz = /bits/ 64 <2016000000>;
- opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
- };
-
- opp-2112000000 {
- opp-hz = /bits/ 64 <2112000000>;
- opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
- };
-
- opp-2188800000 {
- opp-hz = /bits/ 64 <2188800000>;
- opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
- };
-
- opp-2265600000 {
- opp-hz = /bits/ 64 <2265600000>;
- opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
- };
-
- opp-2361600000 {
- opp-hz = /bits/ 64 <2361600000>;
- opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
- };
-
- opp-2457600000 {
- opp-hz = /bits/ 64 <2457600000>;
- opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
- };
-
- opp-2553600000 {
- opp-hz = /bits/ 64 <2553600000>;
- opp-peak-kBps = <(3196800 * 4) (1708800 * 32)>;
- };
- };
-
dummy-sink {
compatible = "arm,coresight-dummy-sink";
@@ -527,33 +293,12 @@ scm {
};
};
- clk_virt: interconnect-clk-virt {
- compatible = "qcom,sa8775p-clk-virt";
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- mc_virt: interconnect-mc-virt {
- compatible = "qcom,sa8775p-mc-virt";
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
/* Will be updated by the bootloader. */
memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x0>;
};
- qup_opp_table_100mhz: opp-table-qup100mhz {
- compatible = "operating-points-v2";
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- };
- };
-
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -1002,30 +747,6 @@ soc: soc@0 {
#size-cells = <2>;
ranges = <0 0 0 0 0x10 0>;
- gcc: clock-controller@100000 {
- compatible = "qcom,sa8775p-gcc";
- reg = <0x0 0x00100000 0x0 0xc7018>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&sleep_clk>,
- <0>,
- <0>,
- <0>,
- <&usb_0_qmpphy>,
- <&usb_1_qmpphy>,
- <0>,
- <0>,
- <0>,
- <&pcie0_phy>,
- <&pcie1_phy>,
- <0>,
- <0>,
- <0>;
- power-domains = <&rpmhpd SA8775P_CX>;
- };
-
ipcc: mailbox@408000 {
compatible = "qcom,sa8775p-ipcc", "qcom,ipcc";
reg = <0x0 0x00408000 0x0 0x1000>;
@@ -1073,9 +794,6 @@ qupv3_id_2: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x008c0000 0x0 0x6000>;
ranges;
- clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
- <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
- clock-names = "m-ahb", "s-ahb";
iommus = <&apps_smmu 0x5a3 0x0>;
#address-cells = <2>;
#size-cells = <2>;
@@ -1087,20 +805,6 @@ i2c14: i2c@880000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c14_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
<&gpi_dma2 1 0 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1114,20 +818,6 @@ spi14: spi@880000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi14_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
<&gpi_dma2 1 0 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1139,16 +829,6 @@ uart14: serial@880000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x00880000 0x0 0x4000>;
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_uart14_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core", "qup-config";
- power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
@@ -1158,20 +838,6 @@ i2c15: i2c@884000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c15_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
<&gpi_dma2 1 1 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1185,20 +851,6 @@ spi15: spi@884000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi15_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
<&gpi_dma2 1 1 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1210,16 +862,6 @@ uart15: serial@884000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x00884000 0x0 0x4000>;
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_uart15_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core", "qup-config";
- power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
@@ -1229,20 +871,6 @@ i2c16: i2c@888000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c16_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
<&gpi_dma2 1 2 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1254,20 +882,6 @@ spi16: spi@888000 {
compatible = "qcom,geni-spi";
reg = <0x0 0x00888000 0x0 0x4000>;
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi16_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
<&gpi_dma2 1 2 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1281,16 +895,6 @@ uart16: serial@888000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x00888000 0x0 0x4000>;
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_uart16_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core", "qup-config";
- power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
@@ -1300,20 +904,6 @@ i2c17: i2c@88c000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c17_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
<&gpi_dma2 1 3 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1327,20 +917,6 @@ spi17: spi@88c000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi17_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
<&gpi_dma2 1 3 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1352,16 +928,6 @@ uart17: serial@88c000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x0088c000 0x0 0x4000>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_uart17_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core", "qup-config";
- power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
@@ -1369,20 +935,6 @@ i2c18: i2c@890000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x00890000 0x0 0x4000>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c18_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
<&gpi_dma2 1 4 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1398,20 +950,6 @@ spi18: spi@890000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi18_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
<&gpi_dma2 1 4 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1423,16 +961,6 @@ uart18: serial@890000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x00890000 0x0 0x4000>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_uart18_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core", "qup-config";
- power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
@@ -1442,20 +970,6 @@ i2c19: i2c@894000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c19_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
<&gpi_dma2 1 5 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1469,20 +983,6 @@ spi19: spi@894000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi19_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
<&gpi_dma2 1 5 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1494,16 +994,6 @@ uart19: serial@894000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x00894000 0x0 0x4000>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_uart19_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core", "qup-config";
- power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
@@ -1513,20 +1003,6 @@ i2c20: i2c@898000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c20_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
<&gpi_dma2 1 6 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1540,20 +1016,6 @@ spi20: spi@898000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi20_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
<&gpi_dma2 1 6 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1565,16 +1027,6 @@ uart20: serial@898000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x00898000 0x0 0x4000>;
interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_uart20_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core", "qup-config";
- power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
@@ -1608,9 +1060,6 @@ qupv3_id_0: geniqup@9c0000 {
#address-cells = <2>;
#size-cells = <2>;
ranges;
- clock-names = "m-ahb", "s-ahb";
- clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
- <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
iommus = <&apps_smmu 0x403 0x0>;
status = "disabled";
@@ -1620,20 +1069,6 @@ i2c0: i2c@980000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c0_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
<&gpi_dma0 1 0 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1647,20 +1082,6 @@ spi0: spi@980000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi0_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
<&gpi_dma0 1 0 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1672,16 +1093,6 @@ uart0: serial@980000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x980000 0x0 0x4000>;
interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_uart0_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core", "qup-config";
- power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
@@ -1691,20 +1102,6 @@ i2c1: i2c@984000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c1_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
<&gpi_dma0 1 1 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1718,20 +1115,6 @@ spi1: spi@984000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi1_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
<&gpi_dma0 1 1 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1743,16 +1126,6 @@ uart1: serial@984000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x984000 0x0 0x4000>;
interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_uart1_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core", "qup-config";
- power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
@@ -1762,20 +1135,6 @@ i2c2: i2c@988000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c2_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
<&gpi_dma0 1 2 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1789,20 +1148,6 @@ spi2: spi@988000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi2_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
<&gpi_dma0 1 2 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1814,16 +1159,6 @@ uart2: serial@988000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x988000 0x0 0x4000>;
interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_uart2_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core", "qup-config";
- power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
@@ -1833,20 +1168,6 @@ i2c3: i2c@98c000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c3_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
<&gpi_dma0 1 3 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1860,20 +1181,6 @@ spi3: spi@98c000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi3_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
<&gpi_dma0 1 3 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1885,16 +1192,6 @@ uart3: serial@98c000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x98c000 0x0 0x4000>;
interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_uart3_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core", "qup-config";
- power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
@@ -1904,20 +1201,6 @@ i2c4: i2c@990000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c4_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
<&gpi_dma0 1 4 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1931,20 +1214,6 @@ spi4: spi@990000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi4_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
<&gpi_dma0 1 4 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1956,16 +1225,6 @@ uart4: serial@990000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x990000 0x0 0x4000>;
interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_uart4_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core", "qup-config";
- power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
@@ -1975,20 +1234,6 @@ i2c5: i2c@994000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c5_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
<&gpi_dma0 1 5 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -2002,20 +1247,6 @@ spi5: spi@994000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi5_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
<&gpi_dma0 1 5 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -2027,16 +1258,6 @@ uart5: serial@994000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x994000 0x0 0x4000>;
interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_uart5_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core", "qup-config";
- power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
};
@@ -2069,9 +1290,6 @@ qupv3_id_1: geniqup@ac0000 {
#address-cells = <2>;
#size-cells = <2>;
ranges;
- clock-names = "m-ahb", "s-ahb";
- clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
- <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
iommus = <&apps_smmu 0x443 0x0>;
status = "disabled";
@@ -2081,20 +1299,6 @@ i2c7: i2c@a80000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c7_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
<&gpi_dma1 1 0 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -2108,20 +1312,6 @@ spi7: spi@a80000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi7_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
<&gpi_dma1 1 0 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -2133,17 +1323,6 @@ uart7: serial@a80000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x00a80000 0x0 0x4000>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
- pinctrl-0 = <&qup_uart7_default>;
- pinctrl-names = "default";
- interconnect-names = "qup-core", "qup-config";
- interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
- power-domains = <&rpmhpd SA8775P_CX>;
- operating-points-v2 = <&qup_opp_table_100mhz>;
status = "disabled";
};
@@ -2153,20 +1332,6 @@ i2c8: i2c@a84000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c8_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
<&gpi_dma1 1 1 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -2180,20 +1345,6 @@ spi8: spi@a84000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi8_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
<&gpi_dma1 1 1 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -2205,17 +1356,6 @@ uart8: serial@a84000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x00a84000 0x0 0x4000>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
- pinctrl-0 = <&qup_uart8_default>;
- pinctrl-names = "default";
- interconnect-names = "qup-core", "qup-config";
- interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
- power-domains = <&rpmhpd SA8775P_CX>;
- operating-points-v2 = <&qup_opp_table_100mhz>;
status = "disabled";
};
@@ -2225,20 +1365,6 @@ i2c9: i2c@a88000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c9_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
<&gpi_dma1 1 2 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -2252,20 +1378,6 @@ spi9: spi@a88000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi9_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
<&gpi_dma1 1 2 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -2277,16 +1389,6 @@ uart9: serial@a88000 {
compatible = "qcom,geni-uart";
reg = <0x0 0xa88000 0x0 0x4000>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_uart9_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core", "qup-config";
- power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
@@ -2296,20 +1398,6 @@ i2c10: i2c@a8c000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c10_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
<&gpi_dma1 1 3 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -2323,20 +1411,6 @@ spi10: spi@a8c000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi10_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
<&gpi_dma1 1 3 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -2348,17 +1422,6 @@ uart10: serial@a8c000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x00a8c000 0x0 0x4000>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
- pinctrl-0 = <&qup_uart10_default>;
- pinctrl-names = "default";
- interconnect-names = "qup-core", "qup-config";
- interconnects = <&clk_virt MASTER_QUP_CORE_1 0
- &clk_virt SLAVE_QUP_CORE_1 0>,
- <&gem_noc MASTER_APPSS_PROC 0
- &config_noc SLAVE_QUP_1 0>;
- power-domains = <&rpmhpd SA8775P_CX>;
- operating-points-v2 = <&qup_opp_table_100mhz>;
status = "disabled";
};
@@ -2368,20 +1431,6 @@ i2c11: i2c@a90000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c11_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
<&gpi_dma1 1 4 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -2395,20 +1444,6 @@ spi11: spi@a90000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi11_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
<&gpi_dma1 1 4 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -2420,17 +1455,6 @@ uart11: serial@a90000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x00a90000 0x0 0x4000>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
- pinctrl-0 = <&qup_uart11_default>;
- pinctrl-names = "default";
- interconnect-names = "qup-core", "qup-config";
- interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
- power-domains = <&rpmhpd SA8775P_CX>;
- operating-points-v2 = <&qup_opp_table_100mhz>;
status = "disabled";
};
@@ -2440,20 +1464,6 @@ i2c12: i2c@a94000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c12_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
<&gpi_dma1 1 5 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -2467,20 +1477,6 @@ spi12: spi@a94000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi12_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
<&gpi_dma1 1 5 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -2492,16 +1488,6 @@ uart12: serial@a94000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x00a94000 0x0 0x4000>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_uart12_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core", "qup-config";
- power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
@@ -2511,20 +1497,6 @@ i2c13: i2c@a98000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c13_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
- <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
<&gpi_dma1 1 6 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -2554,9 +1526,6 @@ qupv3_id_3: geniqup@bc0000 {
#address-cells = <2>;
#size-cells = <2>;
ranges;
- clock-names = "m-ahb", "s-ahb";
- clocks = <&gcc GCC_QUPV3_WRAP_3_M_AHB_CLK>,
- <&gcc GCC_QUPV3_WRAP_3_S_AHB_CLK>;
iommus = <&apps_smmu 0x43 0x0>;
status = "disabled";
@@ -2566,20 +1535,6 @@ i2c21: i2c@b80000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_i2c21_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>,
- <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma3 0 0 QCOM_GPI_I2C>,
<&gpi_dma3 1 0 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -2593,20 +1548,6 @@ spi21: spi@b80000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
- clock-names = "se";
- pinctrl-0 = <&qup_spi21_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>,
- <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "qup-core",
- "qup-config",
- "qup-memory";
- power-domains = <&rpmhpd SA8775P_CX>;
dmas = <&gpi_dma3 0 0 QCOM_GPI_SPI>,
<&gpi_dma3 1 0 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -2618,17 +1559,6 @@ uart21: serial@b80000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x00b80000 0x0 0x4000>;
interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
- interconnect-names = "qup-core", "qup-config";
- pinctrl-0 = <&qup_uart21_default>;
- pinctrl-names = "default";
- interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
- &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>;
- power-domains = <&rpmhpd SA8775P_CX>;
- operating-points-v2 = <&qup_opp_table_100mhz>;
status = "disabled";
};
};
@@ -2638,62 +1568,6 @@ rng: rng@10d2000 {
reg = <0 0x010d2000 0 0x1000>;
};
- config_noc: interconnect@14c0000 {
- compatible = "qcom,sa8775p-config-noc";
- reg = <0x0 0x014c0000 0x0 0x13080>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- system_noc: interconnect@1680000 {
- compatible = "qcom,sa8775p-system-noc";
- reg = <0x0 0x01680000 0x0 0x15080>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- aggre1_noc: interconnect@16c0000 {
- compatible = "qcom,sa8775p-aggre1-noc";
- reg = <0x0 0x016c0000 0x0 0x18080>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
- <&gcc GCC_AGGRE_NOC_QUPV3_AXI_CLK>,
- <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
- <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
- <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>;
- };
-
- aggre2_noc: interconnect@1700000 {
- compatible = "qcom,sa8775p-aggre2-noc";
- reg = <0x0 0x01700000 0x0 0x1b080>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- clocks = <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>,
- <&rpmhcc RPMH_IPA_CLK>;
- };
-
- pcie_anoc: interconnect@1760000 {
- compatible = "qcom,sa8775p-pcie-anoc";
- reg = <0x0 0x01760000 0x0 0xc080>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- gpdsp_anoc: interconnect@1780000 {
- compatible = "qcom,sa8775p-gpdsp-anoc";
- reg = <0x0 0x01780000 0x0 0xe080>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- mmss_noc: interconnect@17a0000 {
- compatible = "qcom,sa8775p-mmss-noc";
- reg = <0x0 0x017a0000 0x0 0x40000>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
pcie0: pcie@1c00000 {
compatible = "qcom,pcie-sa8775p";
reg = <0x0 0x01c00000 0x0 0x3000>,
@@ -2741,38 +1615,9 @@ pcie0: pcie@1c00000 {
<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
- <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
- <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
- <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
-
- clock-names = "aux",
- "cfg",
- "bus_master",
- "bus_slave",
- "slave_q2a";
-
- assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
- assigned-clock-rates = <19200000>;
-
- interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
- <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
- interconnect-names = "pcie-mem", "cpu-pcie";
-
iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
<0x100 &pcie_smmu 0x0001 0x1>;
- resets = <&gcc GCC_PCIE_0_BCR>,
- <&gcc GCC_PCIE_0_LINK_DOWN_BCR>;
- reset-names = "pci",
- "link_down";
-
- power-domains = <&gcc PCIE_0_GDSC>;
-
- phys = <&pcie0_phy>;
- phy-names = "pciephy";
-
eq-presets-8gts = /bits/ 16 <0x5555 0x5555>;
eq-presets-16gts = /bits/ 8 <0x55 0x55>;
@@ -2800,73 +1645,20 @@ pcie0_ep: pcie-ep@1c00000 {
<0x0 0x40005000 0x0 0x2000>;
reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
"mmio", "dma";
-
- clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
- <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
- <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
- <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
-
- clock-names = "aux",
- "cfg",
- "bus_master",
- "bus_slave",
- "slave_q2a";
-
interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "global", "doorbell", "dma";
- interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
- <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
- interconnect-names = "pcie-mem", "cpu-pcie";
-
dma-coherent;
iommus = <&pcie_smmu 0x0000 0x7f>;
- resets = <&gcc GCC_PCIE_0_BCR>;
- reset-names = "core";
- power-domains = <&gcc PCIE_0_GDSC>;
- phys = <&pcie0_phy>;
- phy-names = "pciephy";
num-lanes = <2>;
linux,pci-domain = <0>;
status = "disabled";
};
- pcie0_phy: phy@1c04000 {
- compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy";
- reg = <0x0 0x1c04000 0x0 0x2000>;
-
- clocks = <&gcc GCC_PCIE_0_PHY_AUX_CLK>,
- <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_CLKREF_EN>,
- <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
- <&gcc GCC_PCIE_0_PIPE_CLK>,
- <&gcc GCC_PCIE_0_PIPEDIV2_CLK>;
- clock-names = "aux",
- "cfg_ahb",
- "ref",
- "rchng",
- "pipe",
- "pipediv2";
-
- assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
- assigned-clock-rates = <100000000>;
-
- resets = <&gcc GCC_PCIE_0_PHY_BCR>;
- reset-names = "phy";
-
- #clock-cells = <0>;
- clock-output-names = "pcie_0_pipe_clk";
-
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
pcie1: pcie@1c10000 {
compatible = "qcom,pcie-sa8775p";
reg = <0x0 0x01c10000 0x0 0x3000>,
@@ -2914,38 +1706,9 @@ pcie1: pcie@1c10000 {
<0 0 0 3 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
- <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
- <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
- <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
-
- clock-names = "aux",
- "cfg",
- "bus_master",
- "bus_slave",
- "slave_q2a";
-
- assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
- assigned-clock-rates = <19200000>;
-
- interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
- <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>;
- interconnect-names = "pcie-mem", "cpu-pcie";
-
iommu-map = <0x0 &pcie_smmu 0x0080 0x1>,
<0x100 &pcie_smmu 0x0081 0x1>;
- resets = <&gcc GCC_PCIE_1_BCR>,
- <&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
- reset-names = "pci",
- "link_down";
-
- power-domains = <&gcc PCIE_1_GDSC>;
-
- phys = <&pcie1_phy>;
- phy-names = "pciephy";
-
eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>;
eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>;
@@ -2974,139 +1737,30 @@ pcie1_ep: pcie-ep@1c10000 {
reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
"mmio", "dma";
- clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
- <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
- <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
- <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
-
- clock-names = "aux",
- "cfg",
- "bus_master",
- "bus_slave",
- "slave_q2a";
-
interrupts = <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "global", "doorbell", "dma";
- interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
- <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>;
- interconnect-names = "pcie-mem", "cpu-pcie";
-
dma-coherent;
iommus = <&pcie_smmu 0x80 0x7f>;
- resets = <&gcc GCC_PCIE_1_BCR>;
- reset-names = "core";
- power-domains = <&gcc PCIE_1_GDSC>;
- phys = <&pcie1_phy>;
- phy-names = "pciephy";
num-lanes = <4>;
linux,pci-domain = <1>;
status = "disabled";
};
- pcie1_phy: phy@1c14000 {
- compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy";
- reg = <0x0 0x1c14000 0x0 0x4000>;
-
- clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
- <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_CLKREF_EN>,
- <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
- <&gcc GCC_PCIE_1_PIPE_CLK>,
- <&gcc GCC_PCIE_1_PIPEDIV2_CLK>;
- clock-names = "aux",
- "cfg_ahb",
- "ref",
- "rchng",
- "pipe",
- "pipediv2";
-
- assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
- assigned-clock-rates = <100000000>;
-
- resets = <&gcc GCC_PCIE_1_PHY_BCR>;
- reset-names = "phy";
-
- #clock-cells = <0>;
- clock-output-names = "pcie_1_pipe_clk";
-
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
reg = <0x0 0x01d84000 0x0 0x3000>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_mem_phy>;
- phy-names = "ufsphy";
lanes-per-direction = <2>;
- #reset-cells = <1>;
- resets = <&gcc GCC_UFS_PHY_BCR>;
- reset-names = "rst";
- power-domains = <&gcc UFS_PHY_GDSC>;
- required-opps = <&rpmhpd_opp_nom>;
iommus = <&apps_smmu 0x100 0x0>;
dma-coherent;
- clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
- <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
- <&gcc GCC_UFS_PHY_AHB_CLK>,
- <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
- <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
- <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
- clock-names = "core_clk",
- "bus_aggr_clk",
- "iface_clk",
- "core_clk_unipro",
- "ref_clk",
- "tx_lane0_sync_clk",
- "rx_lane0_sync_clk",
- "rx_lane1_sync_clk";
- freq-table-hz = <75000000 300000000>,
- <0 0>,
- <0 0>,
- <75000000 300000000>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>;
- qcom,ice = <&ice>;
- status = "disabled";
- };
-
- ufs_mem_phy: phy@1d87000 {
- compatible = "qcom,sa8775p-qmp-ufs-phy";
- reg = <0x0 0x01d87000 0x0 0xe10>;
- /*
- * Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It
- * enables the CXO clock to eDP *and* UFS PHY.
- */
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
- <&gcc GCC_EDP_REF_CLKREF_EN>;
- clock-names = "ref", "ref_aux", "qref";
- power-domains = <&gcc UFS_PHY_GDSC>;
- resets = <&ufs_mem_hc 0>;
- reset-names = "ufsphy";
- #phy-cells = <0>;
status = "disabled";
};
- ice: crypto@1d88000 {
- compatible = "qcom,sa8775p-inline-crypto-engine",
- "qcom,inline-crypto-engine";
- reg = <0x0 0x01d88000 0x0 0x18000>;
- clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
- };
-
cryptobam: dma-controller@1dc4000 {
compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
reg = <0x0 0x01dc4000 0x0 0x28000>;
@@ -3127,16 +1781,6 @@ crypto: crypto@1dfa000 {
dma-names = "rx", "tx";
iommus = <&apps_smmu 0x480 0x0>,
<&apps_smmu 0x481 0x0>;
- interconnects = <&aggre2_noc MASTER_CRYPTO_CORE0 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "memory";
- };
-
- lpass_ag_noc: interconnect@3c40000 {
- compatible = "qcom,sa8775p-lpass-ag-noc";
- reg = <0x0 0x03c40000 0x0 0x17200>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
};
ctcu@4001000 {
@@ -4306,171 +2950,19 @@ sdhc: mmc@87c4000 {
interrupt-names = "hc_irq",
"pwr_irq";
- clocks = <&gcc GCC_SDCC1_AHB_CLK>,
- <&gcc GCC_SDCC1_APPS_CLK>;
- clock-names = "iface",
- "core";
-
- interconnects = <&aggre1_noc MASTER_SDC QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
- &config_noc SLAVE_SDC1 QCOM_ICC_TAG_ACTIVE_ONLY>;
- interconnect-names = "sdhc-ddr",
- "cpu-sdhc";
-
iommus = <&apps_smmu 0x0 0x0>;
dma-coherent;
- operating-points-v2 = <&sdhc_opp_table>;
- power-domains = <&rpmhpd SA8775P_CX>;
- resets = <&gcc GCC_SDCC1_BCR>;
-
qcom,dll-config = <0x0007642c>;
qcom,ddr-config = <0x80040868>;
status = "disabled";
-
- sdhc_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- opp-peak-kBps = <1800000 400000>;
- opp-avg-kBps = <100000 0>;
- };
-
- opp-384000000 {
- opp-hz = /bits/ 64 <384000000>;
- required-opps = <&rpmhpd_opp_nom>;
- opp-peak-kBps = <5400000 1600000>;
- opp-avg-kBps = <390000 0>;
- };
- };
- };
-
- usb_0_hsphy: phy@88e4000 {
- compatible = "qcom,sa8775p-usb-hs-phy",
- "qcom,usb-snps-hs-5nm-phy";
- reg = <0 0x088e4000 0 0x120>;
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "ref";
- resets = <&gcc GCC_USB2_PHY_PRIM_BCR>;
-
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- usb_1_hsphy: phy@88e6000 {
- compatible = "qcom,sa8775p-usb-hs-phy",
- "qcom,usb-snps-hs-5nm-phy";
- reg = <0 0x088e6000 0 0x120>;
- clocks = <&gcc GCC_USB_CLKREF_EN>;
- clock-names = "ref";
- resets = <&gcc GCC_USB2_PHY_SEC_BCR>;
-
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- usb_2_hsphy: phy@88e7000 {
- compatible = "qcom,sa8775p-usb-hs-phy",
- "qcom,usb-snps-hs-5nm-phy";
- reg = <0 0x088e7000 0 0x120>;
- clocks = <&gcc GCC_USB_CLKREF_EN>;
- clock-names = "ref";
- resets = <&gcc GCC_USB3_PHY_TERT_BCR>;
-
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- usb_0_qmpphy: phy@88e8000 {
- compatible = "qcom,sa8775p-qmp-usb3-uni-phy";
- reg = <0 0x088e8000 0 0x2000>;
-
- clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
- <&gcc GCC_USB_CLKREF_EN>,
- <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
- <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
- clock-names = "aux", "ref", "com_aux", "pipe";
-
- resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
- <&gcc GCC_USB3PHY_PHY_PRIM_BCR>;
- reset-names = "phy", "phy_phy";
-
- power-domains = <&gcc USB30_PRIM_GDSC>;
-
- #clock-cells = <0>;
- clock-output-names = "usb3_prim_phy_pipe_clk_src";
-
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- usb_1_qmpphy: phy@88ea000 {
- compatible = "qcom,sa8775p-qmp-usb3-uni-phy";
- reg = <0 0x088ea000 0 0x2000>;
-
- clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
- <&gcc GCC_USB_CLKREF_EN>,
- <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
- <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
- clock-names = "aux", "ref", "com_aux", "pipe";
-
- resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
- <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
- reset-names = "phy", "phy_phy";
-
- power-domains = <&gcc USB30_SEC_GDSC>;
-
- #clock-cells = <0>;
- clock-output-names = "usb3_sec_phy_pipe_clk_src";
-
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- refgen: regulator@891c000 {
- compatible = "qcom,sa8775p-refgen-regulator",
- "qcom,sm8250-refgen-regulator";
- reg = <0x0 0x0891c000 0x0 0x84>;
- };
-
- dc_noc: interconnect@90e0000 {
- compatible = "qcom,sa8775p-dc-noc";
- reg = <0x0 0x090e0000 0x0 0x5080>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- gem_noc: interconnect@9100000 {
- compatible = "qcom,sa8775p-gem-noc";
- reg = <0x0 0x09100000 0x0 0xf6080>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
};
usb_0: usb@a600000 {
compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3";
reg = <0 0x0a600000 0 0xfc100>;
- clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
- <&gcc GCC_USB30_PRIM_MASTER_CLK>,
- <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
- <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
- <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
- clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
-
- assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_PRIM_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <200000000>;
-
interrupts-extended = <&intc GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
@@ -4484,20 +2976,9 @@ usb_0: usb@a600000 {
"dm_hs_phy_irq",
"ss_phy_irq";
- power-domains = <&gcc USB30_PRIM_GDSC>;
- required-opps = <&rpmhpd_opp_nom>;
-
- resets = <&gcc GCC_USB30_PRIM_BCR>;
-
- interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
- <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
- interconnect-names = "usb-ddr", "apps-usb";
-
wakeup-source;
iommus = <&apps_smmu 0x080 0x0>;
- phys = <&usb_0_hsphy>, <&usb_0_qmpphy>;
- phy-names = "usb2-phy", "usb3-phy";
snps,dis-u1-entry-quirk;
snps,dis-u2-entry-quirk;
@@ -4528,17 +3009,6 @@ usb_1: usb@a800000 {
compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3";
reg = <0 0x0a800000 0 0xfc100>;
- clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
- <&gcc GCC_USB30_SEC_MASTER_CLK>,
- <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
- <&gcc GCC_USB30_SEC_SLEEP_CLK>,
- <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>;
- clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
-
- assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_SEC_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <200000000>;
-
interrupts-extended = <&intc GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
@@ -4552,20 +3022,9 @@ usb_1: usb@a800000 {
"dm_hs_phy_irq",
"ss_phy_irq";
- power-domains = <&gcc USB30_SEC_GDSC>;
- required-opps = <&rpmhpd_opp_nom>;
-
- resets = <&gcc GCC_USB30_SEC_BCR>;
-
- interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
- <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
- interconnect-names = "usb-ddr", "apps-usb";
-
wakeup-source;
iommus = <&apps_smmu 0x0a0 0x0>;
- phys = <&usb_1_hsphy>, <&usb_1_qmpphy>;
- phy-names = "usb2-phy", "usb3-phy";
snps,dis-u1-entry-quirk;
snps,dis-u2-entry-quirk;
@@ -4576,17 +3035,6 @@ usb_2: usb@a400000 {
compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3";
reg = <0 0x0a400000 0 0xfc100>;
- clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
- <&gcc GCC_USB20_MASTER_CLK>,
- <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
- <&gcc GCC_USB20_SLEEP_CLK>,
- <&gcc GCC_USB20_MOCK_UTMI_CLK>;
- clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
-
- assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
- <&gcc GCC_USB20_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <200000000>;
-
interrupts-extended = <&intc GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
@@ -4598,21 +3046,10 @@ usb_2: usb@a400000 {
"dp_hs_phy_irq",
"dm_hs_phy_irq";
- power-domains = <&gcc USB20_PRIM_GDSC>;
- required-opps = <&rpmhpd_opp_nom>;
-
- resets = <&gcc GCC_USB20_PRIM_BCR>;
-
- interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>,
- <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>;
- interconnect-names = "usb-ddr", "apps-usb";
-
qcom,select-utmi-as-pipe-clk;
wakeup-source;
iommus = <&apps_smmu 0x020 0x0>;
- phys = <&usb_2_hsphy>;
- phy-names = "usb2-phy";
snps,dis-u1-entry-quirk;
snps,dis-u2-entry-quirk;
@@ -4648,11 +3085,6 @@ gpu: gpu@3d00000 {
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&adreno_smmu 0 0xc00>,
<&adreno_smmu 1 0xc00>;
- operating-points-v2 = <&gpu_opp_table>;
- qcom,gmu = <&gmu>;
- interconnects = <&gem_noc MASTER_GFX3D QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "gfx-mem";
#cooling-cells = <2>;
nvmem-cells = <&gpu_speed_bin>;
@@ -4663,99 +3095,6 @@ gpu: gpu@3d00000 {
gpu_zap_shader: zap-shader {
memory-region = <&pil_gpu_mem>;
};
-
- gpu_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-405000000 {
- opp-hz = /bits/ 64 <405000000>;
- opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
- opp-peak-kBps = <5285156>;
- opp-supported-hw = <0x3>;
- };
-
- opp-530000000 {
- opp-hz = /bits/ 64 <530000000>;
- opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
- opp-peak-kBps = <12484375>;
- opp-supported-hw = <0x2>;
- };
-
- opp-676000000 {
- opp-hz = /bits/ 64 <676000000>;
- opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
- opp-peak-kBps = <8171875>;
- opp-supported-hw = <0x1>;
- };
-
- opp-778000000 {
- opp-hz = /bits/ 64 <778000000>;
- opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
- opp-peak-kBps = <10687500>;
- opp-supported-hw = <0x1>;
- };
-
- opp-800000000 {
- opp-hz = /bits/ 64 <800000000>;
- opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
- opp-peak-kBps = <12484375>;
- opp-supported-hw = <0x1>;
- };
- };
- };
-
- gmu: gmu@3d6a000 {
- compatible = "qcom,adreno-gmu-663.0", "qcom,adreno-gmu";
- reg = <0x0 0x03d6a000 0x0 0x34000>,
- <0x0 0x03de0000 0x0 0x10000>,
- <0x0 0x0b290000 0x0 0x10000>;
- reg-names = "gmu", "rscc", "gmu_pdc";
- interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hfi", "gmu";
- clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
- <&gpucc GPU_CC_CXO_CLK>,
- <&gcc GCC_DDRSS_GPU_AXI_CLK>,
- <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
- <&gpucc GPU_CC_AHB_CLK>,
- <&gpucc GPU_CC_HUB_CX_INT_CLK>,
- <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
- clock-names = "gmu",
- "cxo",
- "axi",
- "memnoc",
- "ahb",
- "hub",
- "smmu_vote";
- power-domains = <&gpucc GPU_CC_CX_GDSC>,
- <&gpucc GPU_CC_GX_GDSC>;
- power-domain-names = "cx",
- "gx";
- iommus = <&adreno_smmu 5 0xc00>;
- operating-points-v2 = <&gmu_opp_table>;
-
- gmu_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
- };
- };
- };
-
- gpucc: clock-controller@3d90000 {
- compatible = "qcom,sa8775p-gpucc";
- reg = <0x0 0x03d90000 0x0 0xa000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_GPU_GPLL0_CLK_SRC>,
- <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
- clock-names = "bi_tcxo",
- "gcc_gpu_gpll0_clk_src",
- "gcc_gpu_gpll0_div_clk_src";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
};
adreno_smmu: iommu@3da0000 {
@@ -4765,21 +3104,6 @@ adreno_smmu: iommu@3da0000 {
#iommu-cells = <2>;
#global-interrupts = <2>;
dma-coherent;
- power-domains = <&gpucc GPU_CC_CX_GDSC>;
- clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
- <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
- <&gpucc GPU_CC_AHB_CLK>,
- <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
- <&gpucc GPU_CC_CX_GMU_CLK>,
- <&gpucc GPU_CC_HUB_CX_INT_CLK>,
- <&gpucc GPU_CC_HUB_AON_CLK>;
- clock-names = "gcc_gpu_memnoc_gfx_clk",
- "gcc_gpu_snoc_dvm_gfx_clk",
- "gpu_cc_ahb_clk",
- "gpu_cc_hlos1_vote_gpu_smmu_clk",
- "gpu_cc_cx_gmu_clk",
- "gpu_cc_hub_cx_int_clk",
- "gpu_cc_hub_aon_clk";
interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
@@ -4794,119 +3118,6 @@ adreno_smmu: iommu@3da0000 {
<GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
};
- serdes0: phy@8901000 {
- compatible = "qcom,sa8775p-dwmac-sgmii-phy";
- reg = <0x0 0x08901000 0x0 0xe10>;
- clocks = <&gcc GCC_SGMI_CLKREF_EN>;
- clock-names = "sgmi_ref";
- #phy-cells = <0>;
- status = "disabled";
- };
-
- serdes1: phy@8902000 {
- compatible = "qcom,sa8775p-dwmac-sgmii-phy";
- reg = <0x0 0x08902000 0x0 0xe10>;
- clocks = <&gcc GCC_SGMI_CLKREF_EN>;
- clock-names = "sgmi_ref";
- #phy-cells = <0>;
- status = "disabled";
- };
-
- pmu@9091000 {
- compatible = "qcom,sa8775p-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
- reg = <0x0 0x9091000 0x0 0x1000>;
- interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>;
- interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
-
- operating-points-v2 = <&llcc_bwmon_opp_table>;
-
- llcc_bwmon_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-0 {
- opp-peak-kBps = <762000>;
- };
-
- opp-1 {
- opp-peak-kBps = <1720000>;
- };
-
- opp-2 {
- opp-peak-kBps = <2086000>;
- };
-
- opp-3 {
- opp-peak-kBps = <2601000>;
- };
-
- opp-4 {
- opp-peak-kBps = <2929000>;
- };
-
- opp-5 {
- opp-peak-kBps = <5931000>;
- };
-
- opp-6 {
- opp-peak-kBps = <6515000>;
- };
-
- opp-7 {
- opp-peak-kBps = <7984000>;
- };
-
- opp-8 {
- opp-peak-kBps = <10437000>;
- };
-
- opp-9 {
- opp-peak-kBps = <12195000>;
- };
- };
- };
-
- pmu@90b5400 {
- compatible = "qcom,sa8775p-cpu-bwmon", "qcom,sdm845-bwmon";
- reg = <0x0 0x90b5400 0x0 0x600>;
- interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
- interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
- &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
-
- operating-points-v2 = <&cpu_bwmon_opp_table>;
-
- cpu_bwmon_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-0 {
- opp-peak-kBps = <9155000>;
- };
-
- opp-1 {
- opp-peak-kBps = <12298000>;
- };
-
- opp-2 {
- opp-peak-kBps = <14236000>;
- };
-
- opp-3 {
- opp-peak-kBps = <16265000>;
- };
- };
-
- };
-
- pmu@90b6400 {
- compatible = "qcom,sa8775p-cpu-bwmon", "qcom,sdm845-bwmon";
- reg = <0x0 0x90b6400 0x0 0x600>;
- interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
- interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
- &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
-
- operating-points-v2 = <&cpu_bwmon_opp_table>;
- };
-
llcc: system-cache-controller@9200000 {
compatible = "qcom,sa8775p-llcc";
reg = <0x0 0x09200000 0x0 0x80000>,
@@ -4932,237 +3143,41 @@ iris: video-codec@aa00000 {
reg = <0x0 0x0aa00000 0x0 0xf0000>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
- <&videocc VIDEO_CC_MVS0_GDSC>,
- <&rpmhpd SA8775P_MX>,
- <&rpmhpd SA8775P_MMCX>;
- power-domain-names = "venus",
- "vcodec0",
- "mxc",
- "mmcx";
- operating-points-v2 = <&iris_opp_table>;
-
- clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
- <&videocc VIDEO_CC_MVS0C_CLK>,
- <&videocc VIDEO_CC_MVS0_CLK>;
- clock-names = "iface",
- "core",
- "vcodec0_core";
-
- interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
- &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
- <&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "cpu-cfg",
- "video-mem";
-
memory-region = <&pil_video_mem>;
- resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
- reset-names = "bus";
-
iommus = <&apps_smmu 0x0880 0x0400>,
<&apps_smmu 0x0887 0x0400>;
dma-coherent;
status = "disabled";
-
- iris_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-366000000 {
- opp-hz = /bits/ 64 <366000000>;
- required-opps = <&rpmhpd_opp_svs_l1>,
- <&rpmhpd_opp_svs_l1>;
- };
-
- opp-444000000 {
- opp-hz = /bits/ 64 <444000000>;
- required-opps = <&rpmhpd_opp_svs_l1>,
- <&rpmhpd_opp_nom>;
- };
-
- opp-533000000 {
- opp-hz = /bits/ 64 <533000000>;
- required-opps = <&rpmhpd_opp_nom>,
- <&rpmhpd_opp_turbo>;
- };
-
- opp-560000000 {
- opp-hz = /bits/ 64 <560000000>;
- required-opps = <&rpmhpd_opp_nom>,
- <&rpmhpd_opp_turbo_l1>;
- };
- };
- };
-
- videocc: clock-controller@abf0000 {
- compatible = "qcom,sa8775p-videocc";
- reg = <0x0 0x0abf0000 0x0 0x10000>;
- clocks = <&gcc GCC_VIDEO_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
- <&rpmhcc RPMH_CXO_CLK_A>,
- <&sleep_clk>;
- power-domains = <&rpmhpd SA8775P_MMCX>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
};
cci0: cci@ac13000 {
compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
reg = <0x0 0x0ac13000 0x0 0x1000>;
-
interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
-
- power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
-
- clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
- <&camcc CAM_CC_CPAS_AHB_CLK>,
- <&camcc CAM_CC_CCI_0_CLK>;
- clock-names = "camnoc_axi",
- "cpas_ahb",
- "cci";
-
- pinctrl-0 = <&cci0_0_default &cci0_1_default>;
- pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
- pinctrl-names = "default", "sleep";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
status = "disabled";
-
- cci0_i2c0: i2c-bus@0 {
- reg = <0>;
- clock-frequency = <1000000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cci0_i2c1: i2c-bus@1 {
- reg = <1>;
- clock-frequency = <1000000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
};
cci1: cci@ac14000 {
compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
reg = <0x0 0x0ac14000 0x0 0x1000>;
-
interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
-
- power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
-
- clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
- <&camcc CAM_CC_CPAS_AHB_CLK>,
- <&camcc CAM_CC_CCI_1_CLK>;
- clock-names = "camnoc_axi",
- "cpas_ahb",
- "cci";
-
- pinctrl-0 = <&cci1_0_default &cci1_1_default>;
- pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>;
- pinctrl-names = "default", "sleep";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
status = "disabled";
-
- cci1_i2c0: i2c-bus@0 {
- reg = <0>;
- clock-frequency = <1000000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cci1_i2c1: i2c-bus@1 {
- reg = <1>;
- clock-frequency = <1000000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
};
cci2: cci@ac15000 {
compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
reg = <0x0 0x0ac15000 0x0 0x1000>;
-
interrupts = <GIC_SPI 651 IRQ_TYPE_EDGE_RISING>;
-
- power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
-
- clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
- <&camcc CAM_CC_CPAS_AHB_CLK>,
- <&camcc CAM_CC_CCI_2_CLK>;
- clock-names = "camnoc_axi",
- "cpas_ahb",
- "cci";
-
- pinctrl-0 = <&cci2_0_default &cci2_1_default>;
- pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
- pinctrl-names = "default", "sleep";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
status = "disabled";
-
- cci2_i2c0: i2c-bus@0 {
- reg = <0>;
- clock-frequency = <1000000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cci2_i2c1: i2c-bus@1 {
- reg = <1>;
- clock-frequency = <1000000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
};
cci3: cci@ac16000 {
compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
reg = <0x0 0x0ac16000 0x0 0x1000>;
-
interrupts = <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>;
-
- power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
-
- clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
- <&camcc CAM_CC_CPAS_AHB_CLK>,
- <&camcc CAM_CC_CCI_3_CLK>;
- clock-names = "camnoc_axi",
- "cpas_ahb",
- "cci";
-
- pinctrl-0 = <&cci3_0_default &cci3_1_default>;
- pinctrl-1 = <&cci3_0_sleep &cci3_1_sleep>;
- pinctrl-names = "default", "sleep";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
status = "disabled";
-
- cci3_i2c0: i2c-bus@0 {
- reg = <0>;
- clock-frequency = <1000000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cci3_i2c1: i2c-bus@1 {
- reg = <1>;
- clock-frequency = <1000000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
};
camss: isp@ac78000 {
@@ -5213,63 +3228,6 @@ camss: isp@ac78000 {
"vfe_lite3",
"vfe_lite4";
- clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
- <&camcc CAM_CC_CORE_AHB_CLK>,
- <&camcc CAM_CC_CPAS_AHB_CLK>,
- <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
- <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
- <&camcc CAM_CC_CPAS_IFE_0_CLK>,
- <&camcc CAM_CC_CPAS_IFE_1_CLK>,
- <&camcc CAM_CC_CSID_CLK>,
- <&camcc CAM_CC_CSIPHY0_CLK>,
- <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
- <&camcc CAM_CC_CSIPHY1_CLK>,
- <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
- <&camcc CAM_CC_CSIPHY2_CLK>,
- <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
- <&camcc CAM_CC_CSIPHY3_CLK>,
- <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
- <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
- <&gcc GCC_CAMERA_HF_AXI_CLK>,
- <&gcc GCC_CAMERA_SF_AXI_CLK>,
- <&camcc CAM_CC_ICP_AHB_CLK>,
- <&camcc CAM_CC_IFE_0_CLK>,
- <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
- <&camcc CAM_CC_IFE_1_CLK>,
- <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
- <&camcc CAM_CC_IFE_LITE_CLK>,
- <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
- <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
- <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
- clock-names = "camnoc_axi",
- "core_ahb",
- "cpas_ahb",
- "cpas_fast_ahb_clk",
- "cpas_vfe_lite",
- "cpas_vfe0",
- "cpas_vfe1",
- "csid",
- "csiphy0",
- "csiphy0_timer",
- "csiphy1",
- "csiphy1_timer",
- "csiphy2",
- "csiphy2_timer",
- "csiphy3",
- "csiphy3_timer",
- "csiphy_rx",
- "gcc_axi_hf",
- "gcc_axi_sf",
- "icp_ahb",
- "vfe0",
- "vfe0_fast_ahb",
- "vfe1",
- "vfe1_fast_ahb",
- "vfe_lite",
- "vfe_lite_ahb",
- "vfe_lite_cphy_rx",
- "vfe_lite_csid";
-
interrupts = <GIC_SPI 565 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 564 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
@@ -5313,18 +3271,8 @@ camss: isp@ac78000 {
"vfe_lite3",
"vfe_lite4";
- interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
- &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
- <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "ahb",
- "hf_0";
-
iommus = <&apps_smmu 0x3400 0x20>;
- power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
- power-domain-names = "top";
-
status = "disabled";
ports {
@@ -5349,43 +3297,11 @@ port@3 {
};
};
- camcc: clock-controller@ade0000 {
- compatible = "qcom,sa8775p-camcc";
- reg = <0x0 0x0ade0000 0x0 0x20000>;
- clocks = <&gcc GCC_CAMERA_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
- <&rpmhcc RPMH_CXO_CLK_A>,
- <&sleep_clk>;
- power-domains = <&rpmhpd SA8775P_MMCX>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- };
-
mdss0: display-subsystem@ae00000 {
compatible = "qcom,sa8775p-mdss";
reg = <0x0 0x0ae00000 0x0 0x1000>;
reg-names = "mdss";
- /* same path used twice */
- interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
- <&mmss_noc MASTER_MDP1 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
- &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
- interconnect-names = "mdp0-mem",
- "mdp1-mem",
- "cpu-cfg";
-
- resets = <&dispcc0 MDSS_DISP_CC_MDSS_CORE_BCR>;
-
- power-domains = <&dispcc0 MDSS_DISP_CC_MDSS_CORE_GDSC>;
-
- clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
- <&gcc GCC_DISP_HF_AXI_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>;
-
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
@@ -5404,23 +3320,6 @@ mdss0_mdp: display-controller@ae01000 {
<0x0 0x0aeb0000 0x0 0x3000>;
reg-names = "mdp", "vbif";
- clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
- clock-names = "nrt_bus",
- "iface",
- "lut",
- "core",
- "vsync";
-
- assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
- assigned-clock-rates = <19200000>;
-
- operating-points-v2 = <&mdss0_mdp_opp_table>;
- power-domains = <&rpmhpd SA8775P_MMCX>;
-
interrupt-parent = <&mdss0>;
interrupts = <0>;
@@ -5460,30 +3359,6 @@ dpu_intf2_out: endpoint {
};
};
};
-
- mdss0_mdp_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-375000000 {
- opp-hz = /bits/ 64 <375000000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- };
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- required-opps = <&rpmhpd_opp_nom>;
- };
-
- opp-575000000 {
- opp-hz = /bits/ 64 <575000000>;
- required-opps = <&rpmhpd_opp_turbo>;
- };
-
- opp-650000000 {
- opp-hz = /bits/ 64 <650000000>;
- required-opps = <&rpmhpd_opp_turbo_l1>;
- };
- };
};
mdss0_dsi0: dsi@ae94000 {
@@ -5494,29 +3369,6 @@ mdss0_dsi0: dsi@ae94000 {
interrupt-parent = <&mdss0>;
interrupts = <4>;
- clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_INTF_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_PCLK0_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_ESC0_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
- <&gcc GCC_DISP_HF_AXI_CLK>;
- clock-names = "byte",
- "byte_intf",
- "pixel",
- "core",
- "iface",
- "bus";
- assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_CLK_SRC>,
- <&dispcc0 MDSS_DISP_CC_MDSS_PCLK0_CLK_SRC>;
- assigned-clock-parents = <&mdss0_dsi0_phy DSI_BYTE_PLL_CLK>,
- <&mdss0_dsi0_phy DSI_PIXEL_PLL_CLK>;
- phys = <&mdss0_dsi0_phy>;
-
- operating-points-v2 = <&mdss_dsi_opp_table>;
- power-domains = <&rpmhpd SA8775P_MMCX>;
-
- refgen-supply = <&refgen>;
-
#address-cells = <1>;
#size-cells = <0>;
@@ -5540,34 +3392,6 @@ port@1 {
mdss0_dsi0_out: endpoint { };
};
};
-
- mdss_dsi_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-358000000 {
- opp-hz = /bits/ 64 <358000000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- };
- };
- };
-
- mdss0_dsi0_phy: phy@ae94400 {
- compatible = "qcom,sa8775p-dsi-phy-5nm";
- reg = <0x0 0x0ae94400 0x0 0x200>,
- <0x0 0x0ae94600 0x0 0x280>,
- <0x0 0x0ae94900 0x0 0x27c>;
- reg-names = "dsi_phy",
- "dsi_phy_lane",
- "dsi_pll";
-
- #clock-cells = <1>;
- #phy-cells = <0>;
-
- clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "ref";
-
- status = "disabled";
};
mdss0_dsi1: dsi@ae96000 {
@@ -5578,29 +3402,6 @@ mdss0_dsi1: dsi@ae96000 {
interrupt-parent = <&mdss0>;
interrupts = <5>;
- clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_INTF_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_PCLK1_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_ESC1_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
- <&gcc GCC_DISP_HF_AXI_CLK>;
- clock-names = "byte",
- "byte_intf",
- "pixel",
- "core",
- "iface",
- "bus";
- assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_CLK_SRC>,
- <&dispcc0 MDSS_DISP_CC_MDSS_PCLK1_CLK_SRC>;
- assigned-clock-parents = <&mdss0_dsi1_phy DSI_BYTE_PLL_CLK>,
- <&mdss0_dsi1_phy DSI_PIXEL_PLL_CLK>;
- phys = <&mdss0_dsi1_phy>;
-
- operating-points-v2 = <&mdss_dsi_opp_table>;
- power-domains = <&rpmhpd SA8775P_MMCX>;
-
- refgen-supply = <&refgen>;
-
#address-cells = <1>;
#size-cells = <0>;
@@ -5626,63 +3427,6 @@ port@1 {
};
};
- mdss0_dsi1_phy: phy@ae96400 {
- compatible = "qcom,sa8775p-dsi-phy-5nm";
- reg = <0x0 0x0ae96400 0x0 0x200>,
- <0x0 0x0ae96600 0x0 0x280>,
- <0x0 0x0ae96900 0x0 0x27c>;
- reg-names = "dsi_phy",
- "dsi_phy_lane",
- "dsi_pll";
-
- #clock-cells = <1>;
- #phy-cells = <0>;
-
- clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "ref";
-
- status = "disabled";
- };
-
- mdss0_dp0_phy: phy@aec2a00 {
- compatible = "qcom,sa8775p-edp-phy";
-
- reg = <0x0 0x0aec2a00 0x0 0x200>,
- <0x0 0x0aec2200 0x0 0xd0>,
- <0x0 0x0aec2600 0x0 0xd0>,
- <0x0 0x0aec2000 0x0 0x1c8>;
-
- clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>;
- clock-names = "aux",
- "cfg_ahb";
-
- #clock-cells = <1>;
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- mdss0_dp1_phy: phy@aec5a00 {
- compatible = "qcom,sa8775p-edp-phy";
-
- reg = <0x0 0x0aec5a00 0x0 0x200>,
- <0x0 0x0aec5200 0x0 0xd0>,
- <0x0 0x0aec5600 0x0 0xd0>,
- <0x0 0x0aec5000 0x0 0x1c8>;
-
- clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>;
- clock-names = "aux",
- "cfg_ahb";
-
- #clock-cells = <1>;
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
mdss0_dp0: displayport-controller@af54000 {
compatible = "qcom,sa8775p-dp";
@@ -5699,38 +3443,6 @@ mdss0_dp0: displayport-controller@af54000 {
interrupt-parent = <&mdss0>;
interrupts = <12>;
- clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK>;
- clock-names = "core_iface",
- "core_aux",
- "ctrl_link",
- "ctrl_link_iface",
- "stream_pixel",
- "stream_1_pixel",
- "stream_2_pixel",
- "stream_3_pixel";
- assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK_SRC>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK_SRC>;
- assigned-clock-parents = <&mdss0_dp0_phy 0>,
- <&mdss0_dp0_phy 1>,
- <&mdss0_dp0_phy 1>,
- <&mdss0_dp0_phy 1>,
- <&mdss0_dp0_phy 1>;
- phys = <&mdss0_dp0_phy>;
- phy-names = "dp";
-
- operating-points-v2 = <&dp_opp_table>;
- power-domains = <&rpmhpd SA8775P_MMCX>;
-
#sound-dai-cells = <0>;
status = "disabled";
@@ -5753,30 +3465,6 @@ port@1 {
mdss0_dp0_out: endpoint { };
};
};
-
- dp_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-162000000 {
- opp-hz = /bits/ 64 <162000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-270000000 {
- opp-hz = /bits/ 64 <270000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
-
- opp-540000000 {
- opp-hz = /bits/ 64 <540000000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- };
-
- opp-810000000 {
- opp-hz = /bits/ 64 <810000000>;
- required-opps = <&rpmhpd_opp_nom>;
- };
- };
};
mdss0_dp1: displayport-controller@af5c000 {
@@ -5795,30 +3483,6 @@ mdss0_dp1: displayport-controller@af5c000 {
interrupt-parent = <&mdss0>;
interrupts = <13>;
- clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
- clock-names = "core_iface",
- "core_aux",
- "ctrl_link",
- "ctrl_link_iface",
- "stream_pixel",
- "stream_1_pixel";
- assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
- assigned-clock-parents = <&mdss0_dp1_phy 0>,
- <&mdss0_dp1_phy 1>,
- <&mdss0_dp1_phy 1>;
- phys = <&mdss0_dp1_phy>;
- phy-names = "dp";
-
- operating-points-v2 = <&dp1_opp_table>;
- power-domains = <&rpmhpd SA8775P_MMCX>;
-
#sound-dai-cells = <0>;
status = "disabled";
@@ -5841,52 +3505,9 @@ port@1 {
mdss0_dp1_out: endpoint { };
};
};
-
- dp1_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-162000000 {
- opp-hz = /bits/ 64 <162000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-270000000 {
- opp-hz = /bits/ 64 <270000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
-
- opp-540000000 {
- opp-hz = /bits/ 64 <540000000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- };
-
- opp-810000000 {
- opp-hz = /bits/ 64 <810000000>;
- required-opps = <&rpmhpd_opp_nom>;
- };
- };
};
};
- dispcc0: clock-controller@af00000 {
- compatible = "qcom,sa8775p-dispcc0";
- reg = <0x0 0x0af00000 0x0 0x20000>;
- clocks = <&gcc GCC_DISP_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
- <&rpmhcc RPMH_CXO_CLK_A>,
- <&sleep_clk>,
- <&mdss0_dp0_phy 0>, <&mdss0_dp0_phy 1>,
- <&mdss0_dp1_phy 0>, <&mdss0_dp1_phy 1>,
- <&mdss0_dsi0_phy DSI_BYTE_PLL_CLK>,
- <&mdss0_dsi0_phy DSI_PIXEL_PLL_CLK>,
- <&mdss0_dsi1_phy DSI_BYTE_PLL_CLK>,
- <&mdss0_dsi1_phy DSI_PIXEL_PLL_CLK>;
- power-domains = <&rpmhpd SA8775P_MMCX>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- };
-
pdc: interrupt-controller@b220000 {
compatible = "qcom,sa8775p-pdc", "qcom,pdc";
reg = <0x0 0x0b220000 0x0 0x30000>,
@@ -6332,95 +3953,6 @@ frame@17c2d000 {
};
};
- apps_rsc: rsc@18200000 {
- compatible = "qcom,rpmh-rsc";
- reg = <0x0 0x18200000 0x0 0x10000>,
- <0x0 0x18210000 0x0 0x10000>,
- <0x0 0x18220000 0x0 0x10000>;
- reg-names = "drv-0", "drv-1", "drv-2";
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- qcom,tcs-offset = <0xd00>;
- qcom,drv-id = <2>;
- qcom,tcs-config = <ACTIVE_TCS 2>,
- <SLEEP_TCS 3>,
- <WAKE_TCS 3>,
- <CONTROL_TCS 0>;
- label = "apps_rsc";
- power-domains = <&system_pd>;
-
- apps_bcm_voter: bcm-voter {
- compatible = "qcom,bcm-voter";
- };
-
- rpmhcc: clock-controller {
- compatible = "qcom,sa8775p-rpmh-clk";
- #clock-cells = <1>;
- clock-names = "xo";
- clocks = <&xo_board_clk>;
- };
-
- rpmhpd: power-controller {
- compatible = "qcom,sa8775p-rpmhpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmhpd_opp_table>;
-
- rpmhpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmhpd_opp_ret: opp-0 {
- opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
- };
-
- rpmhpd_opp_min_svs: opp-1 {
- opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
- };
-
- rpmhpd_opp_low_svs: opp2 {
- opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
- };
-
- rpmhpd_opp_svs: opp3 {
- opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
- };
-
- rpmhpd_opp_svs_l1: opp-4 {
- opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
- };
-
- rpmhpd_opp_nom: opp-5 {
- opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
- };
-
- rpmhpd_opp_nom_l1: opp-6 {
- opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
- };
-
- rpmhpd_opp_nom_l2: opp-7 {
- opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
- };
-
- rpmhpd_opp_turbo: opp-8 {
- opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
- };
-
- rpmhpd_opp_turbo_l1: opp-9 {
- opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
- };
- };
- };
- };
-
- epss_l3_cl0: interconnect@18590000 {
- compatible = "qcom,sa8775p-epss-l3",
- "qcom,epss-l3";
- reg = <0x0 0x18590000 0x0 0x1000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
- clock-names = "xo", "alternate";
- #interconnect-cells = <1>;
- };
-
cpufreq_hw: cpufreq@18591000 {
compatible = "qcom,sa8775p-cpufreq-epss",
"qcom,cpufreq-epss";
@@ -6432,21 +3964,9 @@ cpufreq_hw: cpufreq@18591000 {
<GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1";
- clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
- clock-names = "xo", "alternate";
-
#freq-domain-cells = <1>;
};
- epss_l3_cl1: interconnect@18592000 {
- compatible = "qcom,sa8775p-epss-l3",
- "qcom,epss-l3";
- reg = <0x0 0x18592000 0x0 0x1000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
- clock-names = "xo", "alternate";
- #interconnect-cells = <1>;
- };
-
remoteproc_gpdsp0: remoteproc@20c00000 {
compatible = "qcom,sa8775p-gpdsp0-pas";
reg = <0x0 0x20c00000 0x0 0x10000>;
@@ -6459,16 +3979,6 @@ remoteproc_gpdsp0: remoteproc@20c00000 {
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "xo";
-
- power-domains = <&rpmhpd SA8775P_CX>,
- <&rpmhpd SA8775P_MXC>;
- power-domain-names = "cx", "mxc";
-
- interconnects = <&gpdsp_anoc MASTER_DSP0 0
- &config_noc SLAVE_CLK_CTL 0>;
-
memory-region = <&pil_gdsp0_mem>;
qcom,qmp = <&aoss_qmp>;
@@ -6531,16 +4041,6 @@ remoteproc_gpdsp1: remoteproc@21c00000 {
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "xo";
-
- power-domains = <&rpmhpd SA8775P_CX>,
- <&rpmhpd SA8775P_MXC>;
- power-domain-names = "cx", "mxc";
-
- interconnects = <&gpdsp_anoc MASTER_DSP1 0
- &config_noc SLAVE_CLK_CTL 0>;
-
memory-region = <&pil_gdsp1_mem>;
qcom,qmp = <&aoss_qmp>;
@@ -6591,22 +4091,6 @@ compute-cb@3 {
};
};
- dispcc1: clock-controller@22100000 {
- compatible = "qcom,sa8775p-dispcc1";
- reg = <0x0 0x22100000 0x0 0x20000>;
- clocks = <&gcc GCC_DISP_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
- <&rpmhcc RPMH_CXO_CLK_A>,
- <&sleep_clk>,
- <0>, <0>, <0>, <0>,
- <0>, <0>, <0>, <0>;
- power-domains = <&rpmhpd SA8775P_MMCX>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- status = "disabled";
- };
-
ethernet1: ethernet@23000000 {
compatible = "qcom,sa8775p-ethqos";
reg = <0x0 0x23000000 0x0 0x10000>,
@@ -6617,27 +4101,6 @@ ethernet1: ethernet@23000000 {
<GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "sfty";
- clocks = <&gcc GCC_EMAC1_AXI_CLK>,
- <&gcc GCC_EMAC1_SLV_AHB_CLK>,
- <&gcc GCC_EMAC1_PTP_CLK>,
- <&gcc GCC_EMAC1_PHY_AUX_CLK>;
- clock-names = "stmmaceth",
- "pclk",
- "ptp_ref",
- "phyaux";
-
- interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_EMAC1_CFG QCOM_ICC_TAG_ALWAYS>,
- <&aggre1_noc MASTER_EMAC_1 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "cpu-mac",
- "mac-mem";
-
- power-domains = <&gcc EMAC1_GDSC>;
-
- phys = <&serdes1>;
- phy-names = "serdes";
-
iommus = <&apps_smmu 0x140 0xf>;
dma-coherent;
@@ -6659,27 +4122,6 @@ ethernet0: ethernet@23040000 {
<GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "sfty";
- clocks = <&gcc GCC_EMAC0_AXI_CLK>,
- <&gcc GCC_EMAC0_SLV_AHB_CLK>,
- <&gcc GCC_EMAC0_PTP_CLK>,
- <&gcc GCC_EMAC0_PHY_AUX_CLK>;
- clock-names = "stmmaceth",
- "pclk",
- "ptp_ref",
- "phyaux";
-
- interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
- &config_noc SLAVE_EMAC_CFG QCOM_ICC_TAG_ALWAYS>,
- <&aggre1_noc MASTER_EMAC QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "cpu-mac",
- "mac-mem";
-
- power-domains = <&gcc EMAC0_GDSC>;
-
- phys = <&serdes0>;
- phy-names = "serdes";
-
iommus = <&apps_smmu 0x120 0xf>;
dma-coherent;
@@ -6691,13 +4133,6 @@ &config_noc SLAVE_EMAC_CFG QCOM_ICC_TAG_ALWAYS>,
status = "disabled";
};
- nspa_noc: interconnect@260c0000 {
- compatible = "qcom,sa8775p-nspa-noc";
- reg = <0x0 0x260c0000 0x0 0x16080>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
remoteproc_cdsp0: remoteproc@26300000 {
compatible = "qcom,sa8775p-cdsp0-pas";
reg = <0x0 0x26300000 0x0 0x10000>;
@@ -6710,17 +4145,6 @@ remoteproc_cdsp0: remoteproc@26300000 {
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "xo";
-
- power-domains = <&rpmhpd SA8775P_CX>,
- <&rpmhpd SA8775P_MXC>,
- <&rpmhpd SA8775P_NSP0>;
- power-domain-names = "cx", "mxc", "nsp";
-
- interconnects = <&nspa_noc MASTER_CDSP_PROC 0
- &mc_virt SLAVE_EBI1 0>;
-
memory-region = <&pil_cdsp0_mem>;
qcom,qmp = <&aoss_qmp>;
@@ -6830,13 +4254,6 @@ compute-cb@11 {
};
};
- nspb_noc: interconnect@2a0c0000 {
- compatible = "qcom,sa8775p-nspb-noc";
- reg = <0x0 0x2a0c0000 0x0 0x16080>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
remoteproc_cdsp1: remoteproc@2a300000 {
compatible = "qcom,sa8775p-cdsp1-pas";
reg = <0x0 0x2a300000 0x0 0x10000>;
@@ -6849,17 +4266,6 @@ remoteproc_cdsp1: remoteproc@2a300000 {
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "xo";
-
- power-domains = <&rpmhpd SA8775P_CX>,
- <&rpmhpd SA8775P_MXC>,
- <&rpmhpd SA8775P_NSP1>;
- power-domain-names = "cx", "mxc", "nsp";
-
- interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0
- &mc_virt SLAVE_EBI1 0>;
-
memory-region = <&pil_cdsp1_mem>;
qcom,qmp = <&aoss_qmp>;
@@ -7005,15 +4411,6 @@ remoteproc_adsp: remoteproc@30000000 {
interrupt-names = "wdog", "fatal", "ready", "handover",
"stop-ack";
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "xo";
-
- power-domains = <&rpmhpd SA8775P_LCX>,
- <&rpmhpd SA8775P_LMX>;
- power-domain-names = "lcx", "lmx";
-
- interconnects = <&lpass_ag_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
-
memory-region = <&pil_adsp_mem>;
qcom,qmp = <&aoss_qmp>;
--
2.43.0
^ permalink raw reply related
* [PATCH 7/8] dt-bindings: arm: qcom: add SA8255p Ride board
From: Shawn Guo @ 2026-04-09 9:10 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Bartosz Golaszewski, Deepti Jaggi, linux-arm-msm, devicetree,
linux-kernel, Nikunj Kela, Krzysztof Kozlowski, Shawn Guo
In-Reply-To: <20260409091100.474358-1-shengchao.guo@oss.qualcomm.com>
From: Nikunj Kela <quic_nkela@quicinc.com>
Document the SA8255p SoC and its reference board: sa8255p-ride.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Signed-off-by: Deepti Jaggi <deepti.jaggi@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 9f9930fb9a5e..9cb4a8623060 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -927,6 +927,11 @@ properties:
- qcom,sa8155p-adp
- const: qcom,sa8155p
+ - items:
+ - enum:
+ - qcom,sa8255p-ride
+ - const: qcom,sa8255p
+
- items:
- enum:
- qcom,sa8295p-adp
--
2.43.0
^ permalink raw reply related
* [PATCH 8/8] arm64: dts: qcom: sa8255p: Enable sa8255p-ride board support
From: Shawn Guo @ 2026-04-09 9:11 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Bartosz Golaszewski, Deepti Jaggi, linux-arm-msm, devicetree,
linux-kernel, Nikunj Kela, Shazad Hussain, Shawn Guo
In-Reply-To: <20260409091100.474358-1-shengchao.guo@oss.qualcomm.com>
From: Nikunj Kela <quic_nkela@quicinc.com>
Add initial device tree support for the SA8255P Ride board. Enable UFS
storage, UART10 as the serial console, PCIe EP interfaces, thermal zones
for PMM8654AU sensors, and SCMI protocol nodes.
Co-developed-by: Shazad Hussain <shazad.hussain@oss.qualcomm.com>
Signed-off-by: Shazad Hussain <shazad.hussain@oss.qualcomm.com>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Co-developed-by: Deepti Jaggi <deepti.jaggi@oss.qualcomm.com>
Signed-off-by: Deepti Jaggi <deepti.jaggi@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sa8255p-ride.dts | 222 ++++++++++++++++++++++
2 files changed, 223 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sa8255p-ride.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d69e5f3132c4..722532f4e82f 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -201,6 +201,7 @@ qrb5165-rb5-vision-mezzanine-dtbs := qrb5165-rb5.dtb qrb5165-rb5-vision-mezzanin
dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5-vision-mezzanine.dtb
dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sa8255p-ride.dtb
dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sa8540p-ride.dtb
dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride.dtb
diff --git a/arch/arm64/boot/dts/qcom/sa8255p-ride.dts b/arch/arm64/boot/dts/qcom/sa8255p-ride.dts
new file mode 100644
index 000000000000..9b83ccf32664
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8255p-ride.dts
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "lemans-sa8255p.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. SA8255P Ride";
+ compatible = "qcom,sa8255p-ride", "qcom,sa8255p";
+
+ aliases {
+ serial0 = &uart10;
+ serial1 = &uart4;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ thermal-zones {
+ pmm8654au_0_thermal: pm8255-0-thermal {
+ polling-delay-passive = <100>;
+ thermal-sensors = <&scmi23_sensor 0>;
+
+ trips {
+ trip0 {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ pmm8654au_1_thermal: pm8255-1-thermal {
+ polling-delay-passive = <100>;
+ thermal-sensors = <&scmi23_sensor 1>;
+
+ trips {
+ trip0 {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ pmm8654au_2_thermal: pm8255-2-thermal {
+ polling-delay-passive = <100>;
+ thermal-sensors = <&scmi23_sensor 2>;
+
+ trips {
+ trip0 {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ pmm8654au_3_thermal: pm8255-3-thermal {
+ polling-delay-passive = <100>;
+ thermal-sensors = <&scmi23_sensor 3>;
+
+ trips {
+ trip0 {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
+
+&gpll0_board_clk {
+ clock-frequency = <300000000>;
+};
+
+&pcie0_ep {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_ep_clkreq_default &pcie0_ep_perst_default
+ &pcie0_ep_wake_default>;
+ reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie1_ep {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_ep_clkreq_default &pcie1_ep_perst_default
+ &pcie1_ep_wake_default>;
+ reset-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&scmi3 {
+ status = "okay";
+};
+
+&scmi4 {
+ status = "okay";
+};
+
+&scmi5 {
+ status = "okay";
+};
+
+&scmi6 {
+ status = "okay";
+};
+
+&scmi11 {
+ status = "okay";
+};
+
+&scmi15 {
+ status = "okay";
+};
+
+&scmi23 {
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32000>;
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart10 {
+ status = "okay";
+};
+
+&tlmm {
+ pcie0_ep_clkreq_default: pcie0-ep-clkreq-default-state {
+ pins = "gpio1";
+ function = "pcie0_clkreq";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie0_ep_perst_default: pcie0-ep-perst-default-state {
+ pins = "gpio2";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-pull-down;
+ };
+
+ pcie0_ep_wake_default: pcie0-ep-wake-default-state {
+ pins = "gpio0";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie1_ep_clkreq_default: pcie1-ep-clkreq-default-state {
+ pins = "gpio3";
+ function = "pcie1_clkreq";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie1_ep_perst_default: pcie1-ep-perst-default-state {
+ pins = "gpio4";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ pcie1_ep_wake_default: pcie1-ep-wake-default-state {
+ pins = "gpio5";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&ufs_mem_hc {
+ status = "okay";
+};
+
+&xo_board_clk {
+ clock-frequency = <38400000>;
+};
--
2.43.0
^ permalink raw reply related
* Re: [PATCH 06/19] drm/of: add helper to count data-lanes on a remote endpoint
From: Javier Martinez Canillas @ 2026-04-09 9:15 UTC (permalink / raw)
To: Dmitry Baryshkov, Neil Armstrong, Jessica Zhang, David Airlie,
Simona Vetter, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Cong Yang, Ondrej Jirman, Jagan Teki, Liam Girdwood, Mark Brown,
Linus Walleij, Bartosz Golaszewski
Cc: dri-devel, devicetree, linux-kernel, linux-gpio
In-Reply-To: <20260401-waveshare-dsi-touch-v1-6-5e9119b5a014@oss.qualcomm.com>
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> writes:
Hello Dmitry,
> If the DSI panel supports versatile lanes configuration, its driver
> might require determining the number of DSI data lanes, which is usually
> specified on the DSI host side of the OF graph. Add new helper as a
> pair to drm_of_get_data_lanes_count_ep() that lets callers determine
> number of data-lanes on the remote side of the OF graph.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> ---
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
--
Best regards,
Javier Martinez Canillas
Core Platforms
Red Hat
^ permalink raw reply
* Re: [PATCH 08/19] drm/panel: himax-hx8394: set prepare_prev_first
From: Javier Martinez Canillas @ 2026-04-09 9:16 UTC (permalink / raw)
To: Dmitry Baryshkov, Neil Armstrong, Jessica Zhang, David Airlie,
Simona Vetter, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Cong Yang, Ondrej Jirman, Jagan Teki, Liam Girdwood, Mark Brown,
Linus Walleij, Bartosz Golaszewski
Cc: dri-devel, devicetree, linux-kernel, linux-gpio
In-Reply-To: <20260401-waveshare-dsi-touch-v1-8-5e9119b5a014@oss.qualcomm.com>
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> writes:
> Sending DSI commands from the prepare() callback requires DSI link to be
> up at that point. For DSI hosts is guaranteed only if the panel driver
> sets the .prepare_prev_first flag. Set it to let these panels work with
> the DSI hosts which don't power on the link in their .mode_set callback.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> ---
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
--
Best regards,
Javier Martinez Canillas
Core Platforms
Red Hat
^ permalink raw reply
* [PATCH 6/8] arm64: dts: qcom: lemans: Introduce SA8255P SoC support
From: Shawn Guo @ 2026-04-09 9:10 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Bartosz Golaszewski, Deepti Jaggi, linux-arm-msm, devicetree,
linux-kernel, Shawn Guo, Shazad Hussain, Nikunj Kela
In-Reply-To: <20260409091100.474358-1-shengchao.guo@oss.qualcomm.com>
Add support for SA8255P, a Lemans series SoC that utilizes firmware
to configure platform resources such as clocks, interconnects and TLMM.
Device drivers request these resources through the SCMI power, reset and
performance protocols. Assign each device driver a dedicated SCMI
channel and Tx/Rx doorbells to support parallel resource requests and
aggregation in the SCMI platform server. Operate the SCMI server stack
in an SMP-enabled VM using the Qualcomm SMC/HVC transport driver for
communication.
Group resource operations to improve abstraction and reduce the number of
SCMI requests. Follow the SCMI-based resource management approach
demonstrated by Qualcomm at Linaro Connect 2024 [1].
[1] https://resources.linaro.org/en/resource/wfnfEwBhRjLV1PEAJoDDte
Co-developed-by: Shazad Hussain <shazad.hussain@oss.qualcomm.com>
Signed-off-by: Shazad Hussain <shazad.hussain@oss.qualcomm.com>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Co-developed-by: Deepti Jaggi <deepti.jaggi@oss.qualcomm.com>
Signed-off-by: Deepti Jaggi <deepti.jaggi@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/lemans-sa8255p.dtsi | 3027 ++++++++++++++++++
1 file changed, 3027 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/lemans-sa8255p.dtsi
diff --git a/arch/arm64/boot/dts/qcom/lemans-sa8255p.dtsi b/arch/arm64/boot/dts/qcom/lemans-sa8255p.dtsi
new file mode 100644
index 000000000000..7f15d66c68f9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-sa8255p.dtsi
@@ -0,0 +1,3027 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include "lemans.dtsi"
+
+/delete-node/ &xbl_boot_mem;
+/delete-node/ &pil_adsp_mem;
+/delete-node/ &q6_adsp_dtb_mem;
+/delete-node/ &q6_gdsp0_dtb_mem;
+/delete-node/ &pil_gdsp0_mem;
+/delete-node/ &pil_gdsp1_mem;
+/delete-node/ &q6_gdsp1_dtb_mem;
+/delete-node/ &q6_cdsp0_dtb_mem;
+/delete-node/ &pil_cdsp0_mem;
+/delete-node/ &pil_gpu_mem;
+/delete-node/ &q6_cdsp1_dtb_mem;
+/delete-node/ &pil_cdsp1_mem;
+/delete-node/ &pil_cvp_mem;
+/delete-node/ &pil_video_mem;
+/delete-node/ &scmi_mem;
+/delete-node/ &firmware_reserved_mem;
+
+/ {
+ clocks {
+ bi_tcxo_div2: bi-tcxo-div2-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&xo_board_clk>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ #clock-cells = <0>;
+ };
+
+ gpll0_board_clk: gpll0-board-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ xo_board_clk: xo-board-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+ };
+
+ firmware: firmware {
+ scm {
+ memory-region = <&tz_ffi_mem>;
+ };
+
+ scmi0: scmi-0 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem0>;
+
+ interrupts = <GIC_SPI 963 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi0_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi0_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi0_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi1: scmi-1 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem1>;
+
+ interrupts = <GIC_SPI 964 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi1_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi1_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi1_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi2: scmi-2 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem2>;
+
+ interrupts = <GIC_SPI 965 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi2_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi2_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi2_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi3: scmi-3 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem3>;
+
+ interrupts = <GIC_SPI 966 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi3_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi3_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi3_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi4: scmi-4 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem4>;
+
+ interrupts = <GIC_SPI 967 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi4_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi4_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi4_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi5: scmi-5 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem5>;
+
+ interrupts = <GIC_SPI 968 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi5_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi5_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi5_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi6: scmi-6 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem6>;
+
+ interrupts = <GIC_SPI 969 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi6_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi6_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi6_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi7: scmi-7 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem7>;
+
+ interrupts = <GIC_SPI 970 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi7_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi7_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi7_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi8: scmi-8 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem8>;
+
+ interrupts = <GIC_SPI 971 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi8_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi8_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi8_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi9: scmi-9 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem9>;
+
+ interrupts = <GIC_SPI 972 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi9_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi9_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi9_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi10: scmi-10 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem10>;
+
+ interrupts = <GIC_SPI 973 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi10_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi10_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi10_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi11: scmi-11 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem11>;
+
+ interrupts = <GIC_SPI 974 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi11_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi11_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi11_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi12: scmi-12 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem12>;
+
+ interrupts = <GIC_SPI 975 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi12_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi12_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi12_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi13: scmi-13 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem13>;
+
+ interrupts = <GIC_SPI 976 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi13_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi13_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi13_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi14: scmi-14 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem14>;
+
+ interrupts = <GIC_SPI 977 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi14_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi14_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi14_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi15: scmi-15 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem15>;
+
+ interrupts = <GIC_SPI 978 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi15_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi15_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi15_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi16: scmi-16 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem16>;
+
+ interrupts = <GIC_SPI 979 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi16_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi16_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi16_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi17: scmi-17 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem17>;
+
+ interrupts = <GIC_SPI 980 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi17_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi17_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi17_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi18: scmi-18 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem18>;
+
+ interrupts = <GIC_SPI 981 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi18_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi18_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi18_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi19: scmi-19 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem19>;
+
+ interrupts = <GIC_SPI 982 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi19_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi19_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi19_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi20: scmi-20 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem20>;
+
+ interrupts = <GIC_SPI 983 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi20_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi20_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi20_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi21: scmi-21 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem21>;
+
+ interrupts = <GIC_SPI 984 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi21_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi21_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi21_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi22: scmi-22 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem22>;
+
+ interrupts = <GIC_SPI 985 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi22_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi22_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi22_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi23: scmi-23 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem23>;
+
+ interrupts = <GIC_SPI 986 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi23_sensor: protocol@15 {
+ reg = <0x15>;
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ scmi24: scmi-24 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem24>;
+
+ interrupts = <GIC_SPI 987 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi24_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi24_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi24_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi25: scmi-25 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem25>;
+
+ interrupts = <GIC_ESPI 0 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi25_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi25_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi25_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi26: scmi-26 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem26>;
+
+ interrupts = <GIC_ESPI 1 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi26_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi26_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi26_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi27: scmi-27 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem27>;
+
+ interrupts = <GIC_ESPI 2 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi27_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi27_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi27_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi28: scmi-28 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem28>;
+
+ interrupts = <GIC_ESPI 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi28_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi28_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi28_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi29: scmi-29 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem29>;
+
+ interrupts = <GIC_ESPI 4 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi29_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi29_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi29_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi30: scmi-30 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem30>;
+
+ interrupts = <GIC_ESPI 5 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi30_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi30_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi30_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi31: scmi-31 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem31>;
+
+ interrupts = <GIC_ESPI 6 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi31_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi31_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi31_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi32: scmi-32 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem32>;
+
+ interrupts = <GIC_ESPI 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi32_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi32_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi32_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi33: scmi-33 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem33>;
+
+ interrupts = <GIC_ESPI 8 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi33_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi33_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi33_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi34: scmi-34 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem34>;
+
+ interrupts = <GIC_ESPI 9 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi34_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi34_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi34_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi35: scmi-35 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem35>;
+
+ interrupts = <GIC_ESPI 10 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi35_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi35_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi35_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi36: scmi-36 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem36>;
+
+ interrupts = <GIC_ESPI 11 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi36_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi36_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi36_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi37: scmi-37 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem37>;
+
+ interrupts = <GIC_ESPI 12 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi37_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi37_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi37_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi38: scmi-38 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem38>;
+
+ interrupts = <GIC_ESPI 13 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi38_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi38_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi38_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi39: scmi-39 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem39>;
+
+ interrupts = <GIC_ESPI 14 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi39_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi39_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi39_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi40: scmi-40 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem40>;
+
+ interrupts = <GIC_ESPI 15 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi40_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi40_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi40_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi41: scmi-41 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem41>;
+
+ interrupts = <GIC_ESPI 16 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi41_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi41_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi41_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi42: scmi-42 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem42>;
+
+ interrupts = <GIC_ESPI 17 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi42_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi42_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi42_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi43: scmi-43 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem43>;
+
+ interrupts = <GIC_ESPI 18 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi43_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi43_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi43_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi44: scmi-44 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem44>;
+
+ interrupts = <GIC_ESPI 19 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi44_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi44_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi44_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi45: scmi-45 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem45>;
+
+ interrupts = <GIC_ESPI 20 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi45_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi45_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi45_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi46: scmi-46 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem46>;
+
+ interrupts = <GIC_ESPI 21 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi46_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi46_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi46_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi47: scmi-47 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem47>;
+
+ interrupts = <GIC_ESPI 22 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi47_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi47_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi47_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi48: scmi-48 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem48>;
+
+ interrupts = <GIC_ESPI 23 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi48_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi48_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi48_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi49: scmi-49 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem49>;
+
+ interrupts = <GIC_ESPI 24 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi49_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi49_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi49_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi50: scmi-50 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem50>;
+
+ interrupts = <GIC_ESPI 25 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi50_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi50_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi50_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi51: scmi-51 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem51>;
+
+ interrupts = <GIC_ESPI 26 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi51_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi51_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi51_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi52: scmi-52 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem52>;
+
+ interrupts = <GIC_ESPI 27 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi52_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi52_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi52_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi53: scmi-53 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem53>;
+
+ interrupts = <GIC_ESPI 28 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi53_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi53_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi53_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi54: scmi-54 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem54>;
+
+ interrupts = <GIC_ESPI 29 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi54_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi54_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi54_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi55: scmi-55 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem55>;
+
+ interrupts = <GIC_ESPI 30 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi55_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi55_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi55_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi56: scmi-56 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem56>;
+
+ interrupts = <GIC_ESPI 31 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi56_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi56_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi56_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi57: scmi-57 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem57>;
+
+ interrupts = <GIC_ESPI 32 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi57_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi57_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi57_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi58: scmi-58 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem58>;
+
+ interrupts = <GIC_ESPI 33 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi58_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi58_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi58_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi59: scmi-59 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem59>;
+
+ interrupts = <GIC_ESPI 34 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi59_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi59_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi59_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi60: scmi-60 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem60>;
+
+ interrupts = <GIC_ESPI 35 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi60_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi60_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi60_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi61: scmi-61 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem61>;
+
+ interrupts = <GIC_ESPI 36 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi61_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi61_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi61_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi62: scmi-62 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem62>;
+
+ interrupts = <GIC_ESPI 37 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi62_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi62_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi62_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+
+ scmi63: scmi-63 {
+ compatible = "qcom,scmi-smc";
+ arm,smc-id = <0xc6008012>;
+ shmem = <&shmem63>;
+
+ interrupts = <GIC_ESPI 38 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "a2p";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm,max-msg = <10>;
+ arm,max-msg-size = <256>;
+ arm,max-rx-timeout-ms = <3000>;
+
+ status = "disabled";
+
+ scmi63_pd: protocol@11 {
+ reg = <0x11>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi63_dvfs: protocol@13 {
+ reg = <0x13>;
+ #power-domain-cells = <1>;
+ };
+
+ scmi63_rst: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ xbl_boot_mem: xbl-boot@90700000 {
+ reg = <0x0 0x90700000 0x0 0x100000>;
+ no-map;
+ };
+
+ tz_ffi_mem: tz-ffi@91c00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x91c00000 0x0 0x1400000>;
+ no-map;
+ };
+
+ pil_adsp_mem: pil-adsp@95c00000 {
+ reg = <0x0 0x95c00000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ pil_adsp_dtb_mem: q6-adsp-dtb@97a00000 {
+ reg = <0x0 0x97a00000 0x0 0x80000>;
+ no-map;
+ };
+
+ pil_gdsp0_dtb_mem: pil-gdsp0-dtb@97a80000 {
+ reg = <0x0 0x97a80000 0x0 0x80000>;
+ no-map;
+ };
+
+ pil_gdsp0_mem: pil-gdsp0@97b00000 {
+ reg = <0x0 0x97b00000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ pil_gdsp1_mem: pil-gdsp1@99900000 {
+ reg = <0x0 0x99900000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ pil_gdsp1_dtb_mem: pil-gdsp1-dtb@9b700000 {
+ reg = <0x0 0x9b700000 0x0 0x80000>;
+ no-map;
+ };
+
+ pil_cdsp0_dtb_mem: pil-cdsp0-dtb@9b780000 {
+ reg = <0x0 0x9b780000 0x0 0x80000>;
+ no-map;
+ };
+
+ pil_cdsp0_mem: pil-cdsp0@9b800000 {
+ reg = <0x0 0x9b800000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ pil_gpu_mem: pil-gpu@9d600000 {
+ reg = <0x0 0x9d600000 0x0 0x2000>;
+ no-map;
+ };
+
+ pil_cdsp1_dtb_mem: pil-cdsp1-dtb@9d680000 {
+ reg = <0x0 0x9d680000 0x0 0x80000>;
+ no-map;
+ };
+
+ pil_cdsp1_mem: pil-cdsp1@9d700000 {
+ reg = <0x0 0x9d700000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ pil_cvp_mem: pil-cvp@9f500000 {
+ reg = <0x0 0x9f500000 0x0 0x700000>;
+ no-map;
+ };
+
+ pil_video_mem: pil-video@9fc00000 {
+ reg = <0x0 0x9fc00000 0x0 0x700000>;
+ no-map;
+ };
+
+ audio_config_mem: audio-config-region@ac600000 {
+ reg = <0x0 0xac600000 0x0 0xa00000>;
+ no-map;
+ };
+
+ audio_mdf_mem: audio-mdf-region@ad000000 {
+ reg = <0x0 0xad000000 0x0 0x2000000>;
+ no-map;
+ };
+
+ firmware_mem: firmware-region@b0000000 {
+ reg = <0x0 0xb0000000 0x0 0x800000>;
+ no-map;
+ };
+
+ hyptz_reserved_mem: hyptz-reserved@beb00000 {
+ reg = <0x0 0xbeb00000 0x0 0x11500000>;
+ no-map;
+ };
+
+ shmem0: scmi-mem@d0000000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0000000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem1: scmi-mem@d0001000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0001000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem2: scmi-mem@d0002000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0002000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem3: scmi-mem@d0003000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0003000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem4: scmi-mem@d0004000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0004000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem5: scmi-mem@d0005000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0005000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem6: scmi-mem@d0006000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0006000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem7: scmi-mem@d0007000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0007000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem8: scmi-mem@d0008000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0008000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem9: scmi-mem@d0009000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0009000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem10: scmi-mem@d000a000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd000a000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem11: scmi-mem@d000b000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd000b000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem12: scmi-mem@d000c000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd000c000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem13: scmi-mem@d000d000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd000d000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem14: scmi-mem@d000e000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd000e000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem15: scmi-mem@d000f000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd000f000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem16: scmi-mem@d0010000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0010000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem17: scmi-mem@d0011000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0011000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem18: scmi-mem@d0012000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0012000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem19: scmi-mem@d0013000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0013000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem20: scmi-mem@d0014000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0014000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem21: scmi-mem@d0015000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0015000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem22: scmi-mem@d0016000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0016000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem23: scmi-mem@d0017000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0017000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem24: scmi-mem@d0018000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0018000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem25: scmi-mem@d0019000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0019000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem26: scmi-mem@d001a000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd001a000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem27: scmi-mem@d001b000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd001b000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem28: scmi-mem@d001c000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd001c000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem29: scmi-mem@d001d000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd001d000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem30: scmi-mem@d001e000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd001e000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem31: scmi-mem@d001f000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd001f000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem32: scmi-mem@d0020000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0020000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem33: scmi-mem@d0021000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0021000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem34: scmi-mem@d0022000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0022000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem35: scmi-mem@d0023000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0023000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem36: scmi-mem@d0024000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0024000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem37: scmi-mem@d0025000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0025000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem38: scmi-mem@d0026000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0026000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem39: scmi-mem@d0027000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0027000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem40: scmi-mem@d0028000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0028000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem41: scmi-mem@d0029000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0029000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem42: scmi-mem@d002a000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd002a000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem43: scmi-mem@d002b000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd002b000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem44: scmi-mem@d002c000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd002c000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem45: scmi-mem@d002d000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd002d000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem46: scmi-mem@d002e000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd002e000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem47: scmi-mem@d002f000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd002f000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem48: scmi-mem@d0030000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0030000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem49: scmi-mem@d0031000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0031000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem50: scmi-mem@d0032000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0032000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem51: scmi-mem@d0033000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0033000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem52: scmi-mem@d0034000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0034000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem53: scmi-mem@d0035000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0035000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem54: scmi-mem@d0036000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0036000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem55: scmi-mem@d0037000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0037000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem56: scmi-mem@d0038000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0038000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem57: scmi-mem@d0039000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0039000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem58: scmi-mem@d003a000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd003a000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem59: scmi-mem@d003b000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd003b000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem60: scmi-mem@d003c000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd003c000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem61: scmi-mem@d003d000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd003d000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem62: scmi-mem@d003e000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd003e000 0x0 0x1000>;
+ no-map;
+ };
+
+ shmem63: scmi-mem@d003f000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd003f000 0x0 0x1000>;
+ no-map;
+ };
+
+ firmware_logs_mem: firmware-logs@d0040000 {
+ reg = <0x0 0xd0040000 0x0 0x10000>;
+ no-map;
+ };
+
+ firmware_audio_mem: firmware-audio@d0050000 {
+ reg = <0x0 0xd0050000 0x0 0x4000>;
+ no-map;
+ };
+
+ firmware_camera_mem: firmware-camera@d0054000 {
+ no-map;
+ reg = <0x0 0xd0054000 0x0 0x2000>;
+ };
+
+ firmware_reserved_mem: firmware-reserved@d0056000 {
+ reg = <0x0 0xd0056000 0x0 0x9a000>;
+ no-map;
+ };
+
+ firmware_quantum_test_mem: firmware-quantum-test@d00f0000 {
+ reg = <0x0 0xd00f0000 0x0 0x10000>;
+ no-map;
+ };
+
+ tags_mem: tags@d0100000 {
+ reg = <0x0 0xd0100000 0x0 0x1200000>;
+ no-map;
+ };
+
+ qtee_mem: qtee@d1300000 {
+ reg = <0x0 0xd1300000 0x0 0x500000>;
+ no-map;
+ };
+
+ deepsleep_backup_mem: deepsleep-backup@d1800000 {
+ reg = <0x0 0xd1800000 0x0 0x100000>;
+ no-map;
+ };
+
+ trusted_apps_mem: trusted-apps@d1900000 {
+ reg = <0x0 0xd1900000 0x0 0x3800000>;
+ no-map;
+ };
+
+ tz_stat_mem: tz-stat@db100000 {
+ reg = <0x0 0xdb100000 0x0 0x100000>;
+ no-map;
+ };
+
+ cpucp_fw_mem: cpucp-fw@db200000 {
+ reg = <0x0 0xdb200000 0x0 0x100000>;
+ no-map;
+ };
+
+ cma: linux,cma {
+ compatible = "shared-dma-pool";
+ alloc-ranges = <0x0 0x00000000 0x0 0xdfffffff>;
+ reusable;
+ alignment = <0x0 0x400000>;
+ size = <0x0 0x2000000>;
+ linux,cma-default;
+ };
+ };
+
+ soc: soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0 0 0 0x10 0>;
+
+ qupv3_id_2: geniqup@8c0000 {
+ compatible = "qcom,sa8255p-geni-se-qup";
+
+ i2c14: i2c@880000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi14: spi@880000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart14: serial@880000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ };
+
+ i2c15: i2c@884000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi15: spi@884000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart15: serial@884000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ };
+
+ i2c16: i2c@888000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi16: spi@888000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart16: serial@888000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ };
+
+ i2c17: i2c@88c000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi17: spi@88c000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart17: serial@88c000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ };
+
+ i2c18: i2c@890000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi18: spi@890000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart18: serial@890000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ };
+
+ i2c19: i2c@894000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi19: spi@894000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart19: serial@894000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ };
+
+ i2c20: i2c@898000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi20: spi@898000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart20: serial@898000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ };
+ };
+
+ qupv3_id_0: geniqup@9c0000 {
+ compatible = "qcom,sa8255p-geni-se-qup";
+
+ i2c0: i2c@980000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi0: spi@980000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart0: serial@980000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ power-domains = <&scmi11_pd 0>, <&scmi11_dvfs 0>;
+ power-domain-names = "power", "perf";
+ };
+
+ i2c1: i2c@984000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi1: spi@984000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart1: serial@984000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ power-domains = <&scmi11_pd 1>, <&scmi11_dvfs 1>;
+ power-domain-names = "power", "perf";
+ };
+
+ i2c2: i2c@988000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi2: spi@988000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart2: serial@988000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ power-domains = <&scmi11_pd 2>, <&scmi11_dvfs 2>;
+ power-domain-names = "power", "perf";
+ };
+
+ i2c3: i2c@98c000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi3: spi@98c000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart3: serial@98c000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ power-domains = <&scmi11_pd 3>, <&scmi11_dvfs 3>;
+ power-domain-names = "power", "perf";
+ };
+
+ i2c4: i2c@990000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi4: spi@990000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart4: serial@990000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ power-domains = <&scmi11_pd 4>, <&scmi11_dvfs 4>;
+ power-domain-names = "power", "perf";
+ };
+
+ i2c5: i2c@994000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi5: spi@994000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart5: serial@994000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ power-domains = <&scmi11_pd 5>, <&scmi11_dvfs 5>;
+ power-domain-names = "power", "perf";
+ };
+ };
+
+ qupv3_id_1: geniqup@ac0000 {
+ compatible = "qcom,sa8255p-geni-se-qup";
+
+ i2c7: i2c@a80000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi7: spi@a80000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart7: serial@a80000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ power-domains = <&scmi11_pd 7>, <&scmi11_dvfs 7>;
+ power-domain-names = "power", "perf";
+ };
+
+ i2c8: i2c@a84000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi8: spi@a84000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart8: serial@a84000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ power-domains = <&scmi11_pd 8>, <&scmi11_dvfs 8>;
+ power-domain-names = "power", "perf";
+ };
+
+ i2c9: i2c@a88000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi9: spi@a88000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart9: serial@a88000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ power-domains = <&scmi11_pd 9>, <&scmi11_dvfs 9>;
+ power-domain-names = "power", "perf";
+ };
+
+ i2c10: i2c@a8c000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi10: spi@a8c000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart10: serial@a8c000 {
+ compatible = "qcom,sa8255p-geni-debug-uart";
+ power-domains = <&scmi11_pd 10>, <&scmi11_dvfs 10>;
+ power-domain-names = "power", "perf";
+ };
+
+ i2c11: i2c@a90000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi11: spi@a90000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart11: serial@a90000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ power-domains = <&scmi11_pd 11>, <&scmi11_dvfs 11>;
+ power-domain-names = "power", "perf";
+ };
+
+ i2c12: i2c@a94000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi12: spi@a94000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart12: serial@a94000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ power-domains = <&scmi11_pd 12>, <&scmi11_dvfs 12>;
+ power-domain-names = "power", "perf";
+ };
+
+ i2c13: i2c@a98000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+ };
+
+ qupv3_id_3: geniqup@bc0000 {
+ compatible = "qcom,sa8255p-geni-se-qup";
+
+ i2c21: i2c@b80000 {
+ compatible = "qcom,sa8255p-geni-i2c";
+ };
+
+ spi21: spi@b80000 {
+ compatible = "qcom,sa8255p-geni-spi";
+ };
+
+ uart21: serial@b80000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ power-domains = <&scmi11_pd 21>, <&scmi11_dvfs 21>;
+ power-domain-names = "power", "perf";
+ };
+ };
+
+ pcie0_ep: pcie-ep@1c00000 {
+ compatible = "qcom,sa8255p-pcie-ep";
+ power-domains = <&scmi5_pd 1>;
+ /delete-property/ linux,pci-domain;
+ };
+
+ pcie1_ep: pcie-ep@1c10000 {
+ compatible = "qcom,sa8255p-pcie-ep";
+ power-domains = <&scmi6_pd 1>;
+ /delete-property/ linux,pci-domain;
+ };
+
+ ufs_mem_hc: ufshc@1d84000 {
+ compatible = "qcom,sa8255p-ufshc";
+ power-domains = <&scmi3_pd 0>;
+ };
+
+ adreno_smmu: iommu@3da0000 {
+ power-domains = <&scmi15_pd 0>;
+ };
+
+ cpufreq_hw: cpufreq@18591000 {
+ clocks = <&bi_tcxo_div2>, <&gpll0_board_clk>;
+ clock-names = "xo", "alternate";
+ };
+ };
+};
--
2.43.0
^ permalink raw reply related
* Re: [PATCH 09/19] drm/panel: himax-hx8394: simplify hx8394_enable()
From: Javier Martinez Canillas @ 2026-04-09 9:20 UTC (permalink / raw)
To: Dmitry Baryshkov, Neil Armstrong, Jessica Zhang, David Airlie,
Simona Vetter, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Cong Yang, Ondrej Jirman, Jagan Teki, Liam Girdwood, Mark Brown,
Linus Walleij, Bartosz Golaszewski
Cc: dri-devel, devicetree, linux-kernel, linux-gpio
In-Reply-To: <20260401-waveshare-dsi-touch-v1-9-5e9119b5a014@oss.qualcomm.com>
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> writes:
> Simplify hx8394_enable() function by using hx8394_disable() instead of
> open-coding it and mipi_dsi_msleep() instead of manual checks.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> ---
Nice cleanup.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
--
Best regards,
Javier Martinez Canillas
Core Platforms
Red Hat
^ permalink raw reply
* [PATCH v4 0/7] Add support for videocc and camcc on X1P42100 platform
From: Jagadeesh Kona @ 2026-04-09 9:21 UTC (permalink / raw)
To: Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jagadeesh Kona,
Bryan O'Donoghue, Konrad Dybcio
Cc: Ajit Pandey, Imran Shaik, Taniya Das, linux-arm-msm, linux-clk,
devicetree, linux-kernel, Jagadeesh Kona, Krzysztof Kozlowski,
Konrad Dybcio, Vladimir Zapolskiy, Abel Vesa
Add support for video and camera clock controllers on
X1P42100 platform.
The purwa(X1P42100) platform includes the hamoa dtsi file
and camcc node is already posted upstream on hamoa(X1E80100)
platform in Bryan's series[1]. Hence included the camcc node
patch[PATCH 06/15] from Bryan's series[1] and extended it for
purwa(X1P42100).
[1]: https://lore.kernel.org/all/20250711-b4-linux-next-25-03-13-dtsi-x1e80100-camss-v7-6-0bc5da82f526@linaro.org/
The camcc node was added in x1e80100.dtsi in above Bryan's series
but moved it to hamoa.dtsi in this series to align as per the latest
changes.
The series also adds the camera QDSS debug clocks support for X1E80100.
This change updates the X1E80100 camcc ABI, so X1E80100 camcc bindings
and driver changes need to be picked together.
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
---
Changes in v4:
- Added R-By tags received on v3
- Included x1e80100 camcc header file in hamoa dtsi which was missed in
v3.
- Link to v3: https://lore.kernel.org/r/20260331-purwa-videocc-camcc-v3-0-6daca180a4b1@oss.qualcomm.com
Changes in v3:
- Added a sepearate new header for Purwa videocc
- Dropped the fixes tags added in v2, since no user observable bug
- Updated the commit text for few patches
- Added R-By tags recieved on v2
- Link to v2: https://lore.kernel.org/r/20260304-purwa-videocc-camcc-v2-0-dbbd2d258bd6@oss.qualcomm.com
Changes in v2:
- Dropped new header file for X1P42100 videocc and included
additional clocks and resets in SM8650 videocc header file
- Updated commit text for videocc and camcc driver patches
- Squashed Purwa videocc & camcc DT compatible update into previous
camcc node patch based on review comments
- Added R-By tags received on v1
- Added Fixes tags based on review comments
- Link to v1: https://lore.kernel.org/r/20260128-purwa-videocc-camcc-v1-0-b23de57df5ba@oss.qualcomm.com
---
Bryan O'Donoghue (1):
arm64: dts: qcom: x1e80100: Add CAMCC block definition
Jagadeesh Kona (6):
dt-bindings: clock: qcom: Add X1P42100 video clock controller
dt-bindings: clock: qcom: Add X1P42100 camera clock controller
clk: qcom: videocc-x1p42100: Add support for video clock controller
clk: qcom: camcc-x1e80100: Add support for camera QDSS debug clocks
clk: qcom: camcc-x1p42100: Add support for camera clock controller
arm64: defconfig: Enable VIDEOCC and CAMCC drivers on Qualcomm X1P42100
.../bindings/clock/qcom,sm8450-videocc.yaml | 3 +
.../bindings/clock/qcom,x1e80100-camcc.yaml | 1 +
arch/arm64/boot/dts/qcom/hamoa.dtsi | 17 +
arch/arm64/boot/dts/qcom/purwa.dtsi | 10 +
arch/arm64/configs/defconfig | 2 +
drivers/clk/qcom/Kconfig | 20 +
drivers/clk/qcom/Makefile | 2 +
drivers/clk/qcom/camcc-x1e80100.c | 64 +
drivers/clk/qcom/camcc-x1p42100.c | 2223 ++++++++++++++++++++
drivers/clk/qcom/videocc-x1p42100.c | 585 ++++++
include/dt-bindings/clock/qcom,x1e80100-camcc.h | 3 +
include/dt-bindings/clock/qcom,x1p42100-videocc.h | 48 +
12 files changed, 2978 insertions(+)
---
base-commit: cf7c3c02fdd0dfccf4d6611714273dcb538af2cb
change-id: 20260331-purwa-videocc-camcc-d9700d0f797d
Best regards,
--
Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
^ permalink raw reply
* [PATCH v4 1/7] dt-bindings: clock: qcom: Add X1P42100 video clock controller
From: Jagadeesh Kona @ 2026-04-09 9:21 UTC (permalink / raw)
To: Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jagadeesh Kona,
Bryan O'Donoghue, Konrad Dybcio
Cc: Ajit Pandey, Imran Shaik, Taniya Das, linux-arm-msm, linux-clk,
devicetree, linux-kernel, Jagadeesh Kona, Krzysztof Kozlowski
In-Reply-To: <20260409-purwa-videocc-camcc-v4-0-5a8e5f2dd4b2@oss.qualcomm.com>
Add device tree bindings for the video clock controller on Qualcomm
X1P42100 (Purwa) SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
---
.../bindings/clock/qcom,sm8450-videocc.yaml | 3 ++
include/dt-bindings/clock/qcom,x1p42100-videocc.h | 48 ++++++++++++++++++++++
2 files changed, 51 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
index 7bbf120d928cc506a4f7aaeaa1c24e5da760e450..5d77029bfaf8830e2bc0c3b8f323c818ee48dba2 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
@@ -20,6 +20,7 @@ description: |
include/dt-bindings/clock/qcom,sm8450-videocc.h
include/dt-bindings/clock/qcom,sm8650-videocc.h
include/dt-bindings/clock/qcom,sm8750-videocc.h
+ include/dt-bindings/clock/qcom,x1p42100-videocc.h
properties:
compatible:
@@ -32,6 +33,7 @@ properties:
- qcom,sm8650-videocc
- qcom,sm8750-videocc
- qcom,x1e80100-videocc
+ - qcom,x1p42100-videocc
clocks:
items:
@@ -70,6 +72,7 @@ allOf:
- qcom,sm8450-videocc
- qcom,sm8550-videocc
- qcom,sm8750-videocc
+ - qcom,x1p42100-videocc
then:
required:
- required-opps
diff --git a/include/dt-bindings/clock/qcom,x1p42100-videocc.h b/include/dt-bindings/clock/qcom,x1p42100-videocc.h
new file mode 100644
index 0000000000000000000000000000000000000000..996408d1a0c32e175e5d4dd65c09bdc8dd47dacf
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,x1p42100-videocc.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_X1P42100_H
+#define _DT_BINDINGS_CLK_QCOM_VIDEO_CC_X1P42100_H
+
+/* VIDEO_CC clocks */
+#define VIDEO_CC_MVS0_CLK 0
+#define VIDEO_CC_MVS0_CLK_SRC 1
+#define VIDEO_CC_MVS0_DIV_CLK_SRC 2
+#define VIDEO_CC_MVS0C_CLK 3
+#define VIDEO_CC_MVS0C_DIV2_DIV_CLK_SRC 4
+#define VIDEO_CC_MVS1_CLK 5
+#define VIDEO_CC_MVS1_CLK_SRC 6
+#define VIDEO_CC_MVS1_DIV_CLK_SRC 7
+#define VIDEO_CC_MVS1C_CLK 8
+#define VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC 9
+#define VIDEO_CC_PLL0 10
+#define VIDEO_CC_PLL1 11
+#define VIDEO_CC_MVS0_SHIFT_CLK 12
+#define VIDEO_CC_MVS0C_SHIFT_CLK 13
+#define VIDEO_CC_MVS1_SHIFT_CLK 14
+#define VIDEO_CC_MVS1C_SHIFT_CLK 15
+#define VIDEO_CC_XO_CLK_SRC 16
+#define VIDEO_CC_MVS0_BSE_CLK 17
+#define VIDEO_CC_MVS0_BSE_CLK_SRC 18
+#define VIDEO_CC_MVS0_BSE_DIV4_DIV_CLK_SRC 19
+
+/* VIDEO_CC power domains */
+#define VIDEO_CC_MVS0C_GDSC 0
+#define VIDEO_CC_MVS0_GDSC 1
+#define VIDEO_CC_MVS1C_GDSC 2
+#define VIDEO_CC_MVS1_GDSC 3
+
+/* VIDEO_CC resets */
+#define CVP_VIDEO_CC_INTERFACE_BCR 0
+#define CVP_VIDEO_CC_MVS0_BCR 1
+#define CVP_VIDEO_CC_MVS0C_BCR 2
+#define CVP_VIDEO_CC_MVS1_BCR 3
+#define CVP_VIDEO_CC_MVS1C_BCR 4
+#define VIDEO_CC_MVS0C_CLK_ARES 5
+#define VIDEO_CC_MVS1C_CLK_ARES 6
+#define VIDEO_CC_XO_CLK_ARES 7
+#define VIDEO_CC_MVS0_BSE_BCR 8
+
+#endif
--
2.34.1
^ permalink raw reply related
* [PATCH v4 2/7] dt-bindings: clock: qcom: Add X1P42100 camera clock controller
From: Jagadeesh Kona @ 2026-04-09 9:21 UTC (permalink / raw)
To: Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jagadeesh Kona,
Bryan O'Donoghue, Konrad Dybcio
Cc: Ajit Pandey, Imran Shaik, Taniya Das, linux-arm-msm, linux-clk,
devicetree, linux-kernel, Jagadeesh Kona, Krzysztof Kozlowski
In-Reply-To: <20260409-purwa-videocc-camcc-v4-0-5a8e5f2dd4b2@oss.qualcomm.com>
Add X1P42100 camera clock controller support and clock bindings
for camera QDSS debug clocks which are applicable for both X1E80100
and X1P42100 platforms.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
---
Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml | 1 +
include/dt-bindings/clock/qcom,x1e80100-camcc.h | 3 +++
2 files changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml
index 938a2f1ff3fca899b5708101df7f8aa07e943336..b28614186cc098268ab0d8c32b21d9dd9508c9f9 100644
--- a/Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml
@@ -23,6 +23,7 @@ properties:
compatible:
enum:
- qcom,x1e80100-camcc
+ - qcom,x1p42100-camcc
reg:
maxItems: 1
diff --git a/include/dt-bindings/clock/qcom,x1e80100-camcc.h b/include/dt-bindings/clock/qcom,x1e80100-camcc.h
index d72fdfb06a7c716ed2ec376e061e4f0ca35f42c5..06c316022fb0d26ec6243b28477564d97f228c8e 100644
--- a/include/dt-bindings/clock/qcom,x1e80100-camcc.h
+++ b/include/dt-bindings/clock/qcom,x1e80100-camcc.h
@@ -115,6 +115,9 @@
#define CAM_CC_SLEEP_CLK_SRC 105
#define CAM_CC_SLOW_AHB_CLK_SRC 106
#define CAM_CC_XO_CLK_SRC 107
+#define CAM_CC_QDSS_DEBUG_CLK 108
+#define CAM_CC_QDSS_DEBUG_CLK_SRC 109
+#define CAM_CC_QDSS_DEBUG_XO_CLK 110
/* CAM_CC power domains */
#define CAM_CC_BPS_GDSC 0
--
2.34.1
^ permalink raw reply related
* [PATCH v4 3/7] clk: qcom: videocc-x1p42100: Add support for video clock controller
From: Jagadeesh Kona @ 2026-04-09 9:21 UTC (permalink / raw)
To: Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jagadeesh Kona,
Bryan O'Donoghue, Konrad Dybcio
Cc: Ajit Pandey, Imran Shaik, Taniya Das, linux-arm-msm, linux-clk,
devicetree, linux-kernel, Jagadeesh Kona, Konrad Dybcio
In-Reply-To: <20260409-purwa-videocc-camcc-v4-0-5a8e5f2dd4b2@oss.qualcomm.com>
Add support for the video clock controller for video clients to be
able to request for videocc clocks on X1P42100 platform. Although
X1P42100 is derived from X1E80100, the video clock controller differs
significantly. The BSE clocks are newly added, several cdiv clocks have
been removed, and most RCG frequency tables have been updated. Initial
PLL configurations also require changes, hence introduce a separate
videocc driver for X1P42100 platform.
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
---
drivers/clk/qcom/Kconfig | 10 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/videocc-x1p42100.c | 585 ++++++++++++++++++++++++++++++++++++
3 files changed, 596 insertions(+)
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 8f55f10261ec2dd4add61101c5619cc4516f7d66..920d5e78e57d1ac62b59eb1c39d1f79c0718abb8 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -199,6 +199,16 @@ config CLK_X1P42100_GPUCC
Say Y if you want to support graphics controller devices and
functionality such as 3D graphics.
+config CLK_X1P42100_VIDEOCC
+ tristate "X1P42100 Video Clock Controller"
+ depends on ARM64 || COMPILE_TEST
+ select CLK_X1E80100_GCC
+ help
+ Support for the video clock controller on Qualcomm Technologies, Inc.
+ X1P42100 devices.
+ Say Y if you want to support video devices and functionality such as
+ video encode/decode.
+
config CLK_QCM2290_GPUCC
tristate "QCM2290 Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 103d6c4b860ccbc6b4ad552e9e6af43298a4474d..ae1f3207a20be4c9163a6f7ce9f309f36e80fc6f 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_CLK_X1E80100_GCC) += gcc-x1e80100.o
obj-$(CONFIG_CLK_X1E80100_GPUCC) += gpucc-x1e80100.o
obj-$(CONFIG_CLK_X1E80100_TCSRCC) += tcsrcc-x1e80100.o
obj-$(CONFIG_CLK_X1P42100_GPUCC) += gpucc-x1p42100.o
+obj-$(CONFIG_CLK_X1P42100_VIDEOCC) += videocc-x1p42100.o
obj-$(CONFIG_CLK_QCM2290_GPUCC) += gpucc-qcm2290.o
obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o
obj-$(CONFIG_IPQ_APSS_5424) += apss-ipq5424.o
diff --git a/drivers/clk/qcom/videocc-x1p42100.c b/drivers/clk/qcom/videocc-x1p42100.c
new file mode 100644
index 0000000000000000000000000000000000000000..2bb40ac6fcc57e817ce8f0b6727a571c7c072ffa
--- /dev/null
+++ b/drivers/clk/qcom/videocc-x1p42100.c
@@ -0,0 +1,585 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,x1p42100-videocc.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "common.h"
+#include "gdsc.h"
+#include "reset.h"
+
+enum {
+ DT_BI_TCXO,
+};
+
+enum {
+ P_BI_TCXO,
+ P_VIDEO_CC_PLL0_OUT_MAIN,
+ P_VIDEO_CC_PLL1_OUT_MAIN,
+};
+
+static const struct pll_vco lucid_ole_vco[] = {
+ { 249600000, 2300000000, 0 },
+};
+
+/* 420.0 MHz Configuration */
+static const struct alpha_pll_config video_cc_pll0_config = {
+ .l = 0x15,
+ .alpha = 0xe000,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00182261,
+ .config_ctl_hi1_val = 0x82aa299c,
+ .test_ctl_val = 0x00000000,
+ .test_ctl_hi_val = 0x00000003,
+ .test_ctl_hi1_val = 0x00009000,
+ .test_ctl_hi2_val = 0x00000034,
+ .user_ctl_val = 0x00000000,
+ .user_ctl_hi_val = 0x00000005,
+};
+
+static struct clk_alpha_pll video_cc_pll0 = {
+ .offset = 0x0,
+ .config = &video_cc_pll0_config,
+ .vco_table = lucid_ole_vco,
+ .num_vco = ARRAY_SIZE(lucid_ole_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr = {
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_pll0",
+ .parent_data = &(const struct clk_parent_data) {
+ .index = DT_BI_TCXO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_evo_ops,
+ },
+ },
+};
+
+/* 1050.0 MHz Configuration */
+static const struct alpha_pll_config video_cc_pll1_config = {
+ .l = 0x36,
+ .alpha = 0xb000,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00182261,
+ .config_ctl_hi1_val = 0x82aa299c,
+ .test_ctl_val = 0x00000000,
+ .test_ctl_hi_val = 0x00000003,
+ .test_ctl_hi1_val = 0x00009000,
+ .test_ctl_hi2_val = 0x00000034,
+ .user_ctl_val = 0x00000000,
+ .user_ctl_hi_val = 0x00000005,
+};
+
+static struct clk_alpha_pll video_cc_pll1 = {
+ .offset = 0x1000,
+ .config = &video_cc_pll1_config,
+ .vco_table = lucid_ole_vco,
+ .num_vco = ARRAY_SIZE(lucid_ole_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr = {
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_pll1",
+ .parent_data = &(const struct clk_parent_data) {
+ .index = DT_BI_TCXO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_evo_ops,
+ },
+ },
+};
+
+static const struct parent_map video_cc_parent_map_0[] = {
+ { P_BI_TCXO, 0 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_0[] = {
+ { .index = DT_BI_TCXO },
+};
+
+static const struct parent_map video_cc_parent_map_1[] = {
+ { P_BI_TCXO, 0 },
+ { P_VIDEO_CC_PLL0_OUT_MAIN, 1 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_1[] = {
+ { .index = DT_BI_TCXO },
+ { .hw = &video_cc_pll0.clkr.hw },
+};
+
+static const struct parent_map video_cc_parent_map_2[] = {
+ { P_BI_TCXO, 0 },
+ { P_VIDEO_CC_PLL1_OUT_MAIN, 1 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_2[] = {
+ { .index = DT_BI_TCXO },
+ { .hw = &video_cc_pll1.clkr.hw },
+};
+
+static const struct freq_tbl ftbl_video_cc_mvs0_bse_clk_src[] = {
+ F(420000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+ F(600000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+ F(670000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+ F(848000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+ F(920000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 video_cc_mvs0_bse_clk_src = {
+ .cmd_rcgr = 0x8154,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = video_cc_parent_map_1,
+ .freq_tbl = ftbl_video_cc_mvs0_bse_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0_bse_clk_src",
+ .parent_data = video_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(video_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_video_cc_mvs0_clk_src[] = {
+ F(210000000, P_VIDEO_CC_PLL0_OUT_MAIN, 2, 0, 0),
+ F(300000000, P_VIDEO_CC_PLL0_OUT_MAIN, 2, 0, 0),
+ F(335000000, P_VIDEO_CC_PLL0_OUT_MAIN, 2, 0, 0),
+ F(424000000, P_VIDEO_CC_PLL0_OUT_MAIN, 2, 0, 0),
+ F(460000000, P_VIDEO_CC_PLL0_OUT_MAIN, 2, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 video_cc_mvs0_clk_src = {
+ .cmd_rcgr = 0x8000,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = video_cc_parent_map_1,
+ .freq_tbl = ftbl_video_cc_mvs0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0_clk_src",
+ .parent_data = video_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(video_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_video_cc_mvs1_clk_src[] = {
+ F(1050000000, P_VIDEO_CC_PLL1_OUT_MAIN, 1, 0, 0),
+ F(1350000000, P_VIDEO_CC_PLL1_OUT_MAIN, 1, 0, 0),
+ F(1650000000, P_VIDEO_CC_PLL1_OUT_MAIN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 video_cc_mvs1_clk_src = {
+ .cmd_rcgr = 0x8018,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = video_cc_parent_map_2,
+ .freq_tbl = ftbl_video_cc_mvs1_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1_clk_src",
+ .parent_data = video_cc_parent_data_2,
+ .num_parents = ARRAY_SIZE(video_cc_parent_data_2),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_video_cc_xo_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 video_cc_xo_clk_src = {
+ .cmd_rcgr = 0x810c,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = video_cc_parent_map_0,
+ .freq_tbl = ftbl_video_cc_xo_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_xo_clk_src",
+ .parent_data = video_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(video_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_regmap_div video_cc_mvs0_bse_div4_div_clk_src = {
+ .reg = 0x817c,
+ .shift = 0,
+ .width = 4,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0_bse_div4_div_clk_src",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_mvs0_bse_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_regmap_div_ro_ops,
+ },
+};
+
+static struct clk_regmap_div video_cc_mvs1_div_clk_src = {
+ .reg = 0x80ec,
+ .shift = 0,
+ .width = 4,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1_div_clk_src",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_mvs1_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_regmap_div_ro_ops,
+ },
+};
+
+static struct clk_regmap_div video_cc_mvs1c_div2_div_clk_src = {
+ .reg = 0x809c,
+ .shift = 0,
+ .width = 4,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1c_div2_div_clk_src",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_mvs1_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_regmap_div_ro_ops,
+ },
+};
+
+static struct clk_branch video_cc_mvs0_bse_clk = {
+ .halt_reg = 0x8170,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x8170,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0_bse_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_mvs0_bse_div4_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs0_clk = {
+ .halt_reg = 0x80b8,
+ .halt_check = BRANCH_HALT_VOTED,
+ .hwcg_reg = 0x80b8,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x80b8,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_mvs0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs0_shift_clk = {
+ .halt_reg = 0x8128,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x8128,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0_shift_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs0c_clk = {
+ .halt_reg = 0x8064,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x8064,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0c_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_mvs0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs0c_shift_clk = {
+ .halt_reg = 0x812c,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x812c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0c_shift_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs1_clk = {
+ .halt_reg = 0x80e0,
+ .halt_check = BRANCH_HALT_VOTED,
+ .hwcg_reg = 0x80e0,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x80e0,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_mvs1_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs1_shift_clk = {
+ .halt_reg = 0x8130,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x8130,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1_shift_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs1c_clk = {
+ .halt_reg = 0x8090,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x8090,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1c_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_mvs1c_div2_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs1c_shift_clk = {
+ .halt_reg = 0x8134,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x8134,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1c_shift_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct gdsc video_cc_mvs0c_gdsc = {
+ .gdscr = 0x804c,
+ .en_rest_wait_val = 0x2,
+ .en_few_wait_val = 0x2,
+ .clk_dis_wait_val = 0x6,
+ .pd = {
+ .name = "video_cc_mvs0c_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+};
+
+static struct gdsc video_cc_mvs0_gdsc = {
+ .gdscr = 0x80a4,
+ .en_rest_wait_val = 0x2,
+ .en_few_wait_val = 0x2,
+ .clk_dis_wait_val = 0x6,
+ .pd = {
+ .name = "video_cc_mvs0_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .parent = &video_cc_mvs0c_gdsc.pd,
+ .flags = HW_CTRL_TRIGGER | POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+};
+
+static struct gdsc video_cc_mvs1c_gdsc = {
+ .gdscr = 0x8078,
+ .en_rest_wait_val = 0x2,
+ .en_few_wait_val = 0x2,
+ .clk_dis_wait_val = 0xf,
+ .pd = {
+ .name = "video_cc_mvs1c_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+};
+
+static struct gdsc video_cc_mvs1_gdsc = {
+ .gdscr = 0x80cc,
+ .en_rest_wait_val = 0x2,
+ .en_few_wait_val = 0x2,
+ .clk_dis_wait_val = 0xf,
+ .pd = {
+ .name = "video_cc_mvs1_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .parent = &video_cc_mvs1c_gdsc.pd,
+ .flags = HW_CTRL_TRIGGER | POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+};
+
+static struct clk_regmap *video_cc_x1p42100_clocks[] = {
+ [VIDEO_CC_MVS0_BSE_CLK] = &video_cc_mvs0_bse_clk.clkr,
+ [VIDEO_CC_MVS0_BSE_CLK_SRC] = &video_cc_mvs0_bse_clk_src.clkr,
+ [VIDEO_CC_MVS0_BSE_DIV4_DIV_CLK_SRC] = &video_cc_mvs0_bse_div4_div_clk_src.clkr,
+ [VIDEO_CC_MVS0_CLK] = &video_cc_mvs0_clk.clkr,
+ [VIDEO_CC_MVS0_CLK_SRC] = &video_cc_mvs0_clk_src.clkr,
+ [VIDEO_CC_MVS0_SHIFT_CLK] = &video_cc_mvs0_shift_clk.clkr,
+ [VIDEO_CC_MVS0C_CLK] = &video_cc_mvs0c_clk.clkr,
+ [VIDEO_CC_MVS0C_SHIFT_CLK] = &video_cc_mvs0c_shift_clk.clkr,
+ [VIDEO_CC_MVS1_CLK] = &video_cc_mvs1_clk.clkr,
+ [VIDEO_CC_MVS1_CLK_SRC] = &video_cc_mvs1_clk_src.clkr,
+ [VIDEO_CC_MVS1_DIV_CLK_SRC] = &video_cc_mvs1_div_clk_src.clkr,
+ [VIDEO_CC_MVS1_SHIFT_CLK] = &video_cc_mvs1_shift_clk.clkr,
+ [VIDEO_CC_MVS1C_CLK] = &video_cc_mvs1c_clk.clkr,
+ [VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC] = &video_cc_mvs1c_div2_div_clk_src.clkr,
+ [VIDEO_CC_MVS1C_SHIFT_CLK] = &video_cc_mvs1c_shift_clk.clkr,
+ [VIDEO_CC_PLL0] = &video_cc_pll0.clkr,
+ [VIDEO_CC_PLL1] = &video_cc_pll1.clkr,
+ [VIDEO_CC_XO_CLK_SRC] = &video_cc_xo_clk_src.clkr,
+};
+
+static struct gdsc *video_cc_x1p42100_gdscs[] = {
+ [VIDEO_CC_MVS0_GDSC] = &video_cc_mvs0_gdsc,
+ [VIDEO_CC_MVS0C_GDSC] = &video_cc_mvs0c_gdsc,
+ [VIDEO_CC_MVS1_GDSC] = &video_cc_mvs1_gdsc,
+ [VIDEO_CC_MVS1C_GDSC] = &video_cc_mvs1c_gdsc,
+};
+
+static const struct qcom_reset_map video_cc_x1p42100_resets[] = {
+ [CVP_VIDEO_CC_INTERFACE_BCR] = { 0x80f0 },
+ [CVP_VIDEO_CC_MVS0_BCR] = { 0x80a0 },
+ [CVP_VIDEO_CC_MVS0C_BCR] = { 0x8048 },
+ [CVP_VIDEO_CC_MVS1_BCR] = { 0x80c8 },
+ [CVP_VIDEO_CC_MVS1C_BCR] = { 0x8074 },
+ [VIDEO_CC_MVS0_BSE_BCR] = { 0x816c },
+ [VIDEO_CC_MVS0C_CLK_ARES] = { 0x8064, 2 },
+ [VIDEO_CC_MVS1C_CLK_ARES] = { 0x8090, 2 },
+ [VIDEO_CC_XO_CLK_ARES] = { 0x8124, 2 },
+};
+
+static struct clk_alpha_pll *video_cc_x1p42100_plls[] = {
+ &video_cc_pll0,
+ &video_cc_pll1,
+};
+
+static u32 video_cc_x1p42100_critical_cbcrs[] = {
+ 0x80f4, /* VIDEO_CC_AHB_CLK */
+ 0x8150, /* VIDEO_CC_SLEEP_CLK */
+ 0x8124, /* VIDEO_CC_XO_CLK */
+};
+
+static const struct regmap_config video_cc_x1p42100_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x9f54,
+ .fast_io = true,
+};
+
+static struct qcom_cc_driver_data video_cc_x1p42100_driver_data = {
+ .alpha_plls = video_cc_x1p42100_plls,
+ .num_alpha_plls = ARRAY_SIZE(video_cc_x1p42100_plls),
+ .clk_cbcrs = video_cc_x1p42100_critical_cbcrs,
+ .num_clk_cbcrs = ARRAY_SIZE(video_cc_x1p42100_critical_cbcrs),
+};
+
+static const struct qcom_cc_desc video_cc_x1p42100_desc = {
+ .config = &video_cc_x1p42100_regmap_config,
+ .clks = video_cc_x1p42100_clocks,
+ .num_clks = ARRAY_SIZE(video_cc_x1p42100_clocks),
+ .resets = video_cc_x1p42100_resets,
+ .num_resets = ARRAY_SIZE(video_cc_x1p42100_resets),
+ .gdscs = video_cc_x1p42100_gdscs,
+ .num_gdscs = ARRAY_SIZE(video_cc_x1p42100_gdscs),
+ .use_rpm = true,
+ .driver_data = &video_cc_x1p42100_driver_data,
+};
+
+static const struct of_device_id video_cc_x1p42100_match_table[] = {
+ { .compatible = "qcom,x1p42100-videocc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, video_cc_x1p42100_match_table);
+
+static int video_cc_x1p42100_probe(struct platform_device *pdev)
+{
+ return qcom_cc_probe(pdev, &video_cc_x1p42100_desc);
+}
+
+static struct platform_driver video_cc_x1p42100_driver = {
+ .probe = video_cc_x1p42100_probe,
+ .driver = {
+ .name = "videocc-x1p42100",
+ .of_match_table = video_cc_x1p42100_match_table,
+ },
+};
+
+module_platform_driver(video_cc_x1p42100_driver);
+
+MODULE_DESCRIPTION("QTI VIDEOCC X1P42100 Driver");
+MODULE_LICENSE("GPL");
--
2.34.1
^ permalink raw reply related
* [PATCH v4 4/7] clk: qcom: camcc-x1e80100: Add support for camera QDSS debug clocks
From: Jagadeesh Kona @ 2026-04-09 9:21 UTC (permalink / raw)
To: Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jagadeesh Kona,
Bryan O'Donoghue, Konrad Dybcio
Cc: Ajit Pandey, Imran Shaik, Taniya Das, linux-arm-msm, linux-clk,
devicetree, linux-kernel, Jagadeesh Kona, Konrad Dybcio
In-Reply-To: <20260409-purwa-videocc-camcc-v4-0-5a8e5f2dd4b2@oss.qualcomm.com>
Add support for camera QDSS debug clocks on X1E80100 platform which
are required to be voted for camera icp and cpas usecases. This change
aligns the camcc driver to the new ABI exposed from X1E80100 camcc
bindings that supports these camcc QDSS debug clocks.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
---
drivers/clk/qcom/camcc-x1e80100.c | 64 +++++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/drivers/clk/qcom/camcc-x1e80100.c b/drivers/clk/qcom/camcc-x1e80100.c
index cbcc1c9fcb341e51272f5595f574f9cb7ef2b52e..7e3fc7aee854eee841176a1330f97dc91af91670 100644
--- a/drivers/clk/qcom/camcc-x1e80100.c
+++ b/drivers/clk/qcom/camcc-x1e80100.c
@@ -1052,6 +1052,31 @@ static struct clk_rcg2 cam_cc_mclk7_clk_src = {
},
};
+static const struct freq_tbl ftbl_cam_cc_qdss_debug_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(60000000, P_CAM_CC_PLL8_OUT_EVEN, 8, 0, 0),
+ F(75000000, P_CAM_CC_PLL0_OUT_EVEN, 8, 0, 0),
+ F(150000000, P_CAM_CC_PLL0_OUT_EVEN, 4, 0, 0),
+ F(300000000, P_CAM_CC_PLL0_OUT_MAIN, 4, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_qdss_debug_clk_src = {
+ .cmd_rcgr = 0x13938,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_qdss_debug_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_qdss_debug_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
static const struct freq_tbl ftbl_cam_cc_sfe_0_clk_src[] = {
F(345600000, P_CAM_CC_PLL6_OUT_EVEN, 1, 0, 0),
F(432000000, P_CAM_CC_PLL6_OUT_EVEN, 1, 0, 0),
@@ -2182,6 +2207,42 @@ static struct clk_branch cam_cc_mclk7_clk = {
},
};
+static struct clk_branch cam_cc_qdss_debug_clk = {
+ .halt_reg = 0x13a64,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13a64,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_qdss_debug_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_qdss_debug_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_qdss_debug_xo_clk = {
+ .halt_reg = 0x13a68,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13a68,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_qdss_debug_xo_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch cam_cc_sfe_0_clk = {
.halt_reg = 0x133c0,
.halt_check = BRANCH_HALT,
@@ -2398,6 +2459,9 @@ static struct clk_regmap *cam_cc_x1e80100_clocks[] = {
[CAM_CC_PLL6_OUT_EVEN] = &cam_cc_pll6_out_even.clkr,
[CAM_CC_PLL8] = &cam_cc_pll8.clkr,
[CAM_CC_PLL8_OUT_EVEN] = &cam_cc_pll8_out_even.clkr,
+ [CAM_CC_QDSS_DEBUG_CLK] = &cam_cc_qdss_debug_clk.clkr,
+ [CAM_CC_QDSS_DEBUG_CLK_SRC] = &cam_cc_qdss_debug_clk_src.clkr,
+ [CAM_CC_QDSS_DEBUG_XO_CLK] = &cam_cc_qdss_debug_xo_clk.clkr,
[CAM_CC_SFE_0_CLK] = &cam_cc_sfe_0_clk.clkr,
[CAM_CC_SFE_0_CLK_SRC] = &cam_cc_sfe_0_clk_src.clkr,
[CAM_CC_SFE_0_FAST_AHB_CLK] = &cam_cc_sfe_0_fast_ahb_clk.clkr,
--
2.34.1
^ permalink raw reply related
* [PATCH v4 5/7] clk: qcom: camcc-x1p42100: Add support for camera clock controller
From: Jagadeesh Kona @ 2026-04-09 9:21 UTC (permalink / raw)
To: Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jagadeesh Kona,
Bryan O'Donoghue, Konrad Dybcio
Cc: Ajit Pandey, Imran Shaik, Taniya Das, linux-arm-msm, linux-clk,
devicetree, linux-kernel, Jagadeesh Kona, Konrad Dybcio
In-Reply-To: <20260409-purwa-videocc-camcc-v4-0-5a8e5f2dd4b2@oss.qualcomm.com>
Add support for the camera clock controller for camera clients to
be able to request for camcc clocks on X1P42100 platform. Although
X1P42100 is derived from X1E80100, the camera clock controller driver
differs significantly. Few PLLs, clocks and GDSC's are removed, there
is delta in frequency tables for most RCG's and parent data structures
also changed for few RCG's. Hence introduce a separate camcc driver
for X1P42100 platform.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
---
drivers/clk/qcom/Kconfig | 10 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/camcc-x1p42100.c | 2223 +++++++++++++++++++++++++++++++++++++
3 files changed, 2234 insertions(+)
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 920d5e78e57d1ac62b59eb1c39d1f79c0718abb8..01778a82ffa294fe3f3e2d0a8101a4af04a355f0 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -190,6 +190,16 @@ config CLK_X1E80100_TCSRCC
Support for the TCSR clock controller on X1E80100 devices.
Say Y if you want to use peripheral devices such as SD/UFS.
+config CLK_X1P42100_CAMCC
+ tristate "X1P42100 Camera Clock Controller"
+ depends on ARM64 || COMPILE_TEST
+ select CLK_X1E80100_GCC
+ help
+ Support for the camera clock controller on Qualcomm Technologies, Inc.
+ X1P42100 devices.
+ Say Y if you want to support camera devices and camera functionality
+ such as capturing pictures.
+
config CLK_X1P42100_GPUCC
tristate "X1P42100 Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index ae1f3207a20be4c9163a6f7ce9f309f36e80fc6f..93a617580b10d6314f34d54d08ae107c1437d973 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_CLK_X1E80100_DISPCC) += dispcc-x1e80100.o
obj-$(CONFIG_CLK_X1E80100_GCC) += gcc-x1e80100.o
obj-$(CONFIG_CLK_X1E80100_GPUCC) += gpucc-x1e80100.o
obj-$(CONFIG_CLK_X1E80100_TCSRCC) += tcsrcc-x1e80100.o
+obj-$(CONFIG_CLK_X1P42100_CAMCC) += camcc-x1p42100.o
obj-$(CONFIG_CLK_X1P42100_GPUCC) += gpucc-x1p42100.o
obj-$(CONFIG_CLK_X1P42100_VIDEOCC) += videocc-x1p42100.o
obj-$(CONFIG_CLK_QCM2290_GPUCC) += gpucc-qcm2290.o
diff --git a/drivers/clk/qcom/camcc-x1p42100.c b/drivers/clk/qcom/camcc-x1p42100.c
new file mode 100644
index 0000000000000000000000000000000000000000..c1a61c267919976d2d869fef4cd3659433ad2993
--- /dev/null
+++ b/drivers/clk/qcom/camcc-x1p42100.c
@@ -0,0 +1,2223 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,x1e80100-camcc.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "common.h"
+#include "gdsc.h"
+#include "reset.h"
+
+enum {
+ DT_IFACE,
+ DT_BI_TCXO,
+ DT_BI_TCXO_AO,
+ DT_SLEEP_CLK,
+};
+
+enum {
+ P_BI_TCXO,
+ P_BI_TCXO_AO,
+ P_CAM_CC_PLL0_OUT_EVEN,
+ P_CAM_CC_PLL0_OUT_MAIN,
+ P_CAM_CC_PLL0_OUT_ODD,
+ P_CAM_CC_PLL1_OUT_EVEN,
+ P_CAM_CC_PLL2_OUT_EVEN,
+ P_CAM_CC_PLL2_OUT_MAIN,
+ P_CAM_CC_PLL3_OUT_EVEN,
+ P_CAM_CC_PLL6_OUT_EVEN,
+ P_SLEEP_CLK,
+};
+
+static const struct pll_vco lucid_ole_vco[] = {
+ { 249600000, 2300000000, 0 },
+};
+
+static const struct pll_vco rivian_ole_vco[] = {
+ { 777000000, 1285000000, 0 },
+};
+
+/* 1200.0 MHz Configuration */
+static const struct alpha_pll_config cam_cc_pll0_config = {
+ .l = 0x3e,
+ .alpha = 0x8000,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00182261,
+ .config_ctl_hi1_val = 0x82aa299c,
+ .test_ctl_val = 0x00000000,
+ .test_ctl_hi_val = 0x00000003,
+ .test_ctl_hi1_val = 0x00009000,
+ .test_ctl_hi2_val = 0x00000034,
+ .user_ctl_val = 0x00008400,
+ .user_ctl_hi_val = 0x00000005,
+};
+
+static struct clk_alpha_pll cam_cc_pll0 = {
+ .offset = 0x0,
+ .config = &cam_cc_pll0_config,
+ .vco_table = lucid_ole_vco,
+ .num_vco = ARRAY_SIZE(lucid_ole_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr = {
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll0",
+ .parent_data = &(const struct clk_parent_data) {
+ .index = DT_BI_TCXO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_evo_ops,
+ },
+ },
+};
+
+static const struct clk_div_table post_div_table_cam_cc_pll0_out_even[] = {
+ { 0x1, 2 },
+ { }
+};
+
+static struct clk_alpha_pll_postdiv cam_cc_pll0_out_even = {
+ .offset = 0x0,
+ .post_div_shift = 10,
+ .post_div_table = post_div_table_cam_cc_pll0_out_even,
+ .num_post_div = ARRAY_SIZE(post_div_table_cam_cc_pll0_out_even),
+ .width = 4,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll0_out_even",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_pll0.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_alpha_pll_postdiv_lucid_ole_ops,
+ },
+};
+
+static const struct clk_div_table post_div_table_cam_cc_pll0_out_odd[] = {
+ { 0x2, 3 },
+ { }
+};
+
+static struct clk_alpha_pll_postdiv cam_cc_pll0_out_odd = {
+ .offset = 0x0,
+ .post_div_shift = 14,
+ .post_div_table = post_div_table_cam_cc_pll0_out_odd,
+ .num_post_div = ARRAY_SIZE(post_div_table_cam_cc_pll0_out_odd),
+ .width = 4,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll0_out_odd",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_pll0.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_alpha_pll_postdiv_lucid_ole_ops,
+ },
+};
+
+/* 728.0 MHz Configuration */
+static const struct alpha_pll_config cam_cc_pll1_config = {
+ .l = 0x25,
+ .alpha = 0xeaaa,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00182261,
+ .config_ctl_hi1_val = 0x82aa299c,
+ .test_ctl_val = 0x00000000,
+ .test_ctl_hi_val = 0x00000003,
+ .test_ctl_hi1_val = 0x00009000,
+ .test_ctl_hi2_val = 0x00000034,
+ .user_ctl_val = 0x00000400,
+ .user_ctl_hi_val = 0x00000005,
+};
+
+static struct clk_alpha_pll cam_cc_pll1 = {
+ .offset = 0x1000,
+ .config = &cam_cc_pll1_config,
+ .vco_table = lucid_ole_vco,
+ .num_vco = ARRAY_SIZE(lucid_ole_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr = {
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll1",
+ .parent_data = &(const struct clk_parent_data) {
+ .index = DT_BI_TCXO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_evo_ops,
+ },
+ },
+};
+
+static const struct clk_div_table post_div_table_cam_cc_pll1_out_even[] = {
+ { 0x1, 2 },
+ { }
+};
+
+static struct clk_alpha_pll_postdiv cam_cc_pll1_out_even = {
+ .offset = 0x1000,
+ .post_div_shift = 10,
+ .post_div_table = post_div_table_cam_cc_pll1_out_even,
+ .num_post_div = ARRAY_SIZE(post_div_table_cam_cc_pll1_out_even),
+ .width = 4,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll1_out_even",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_pll1.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_alpha_pll_postdiv_lucid_ole_ops,
+ },
+};
+
+/* 960.0 MHz Configuration */
+static const struct alpha_pll_config cam_cc_pll2_config = {
+ .l = 0x32,
+ .alpha = 0x0,
+ .config_ctl_val = 0x10000030,
+ .config_ctl_hi_val = 0x80890263,
+ .config_ctl_hi1_val = 0x00000217,
+ .user_ctl_val = 0x00000000,
+ .user_ctl_hi_val = 0x00100000,
+};
+
+static struct clk_alpha_pll cam_cc_pll2 = {
+ .offset = 0x2000,
+ .config = &cam_cc_pll2_config,
+ .vco_table = rivian_ole_vco,
+ .num_vco = ARRAY_SIZE(rivian_ole_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_RIVIAN_EVO],
+ .clkr = {
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll2",
+ .parent_data = &(const struct clk_parent_data) {
+ .index = DT_BI_TCXO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_rivian_evo_ops,
+ },
+ },
+};
+
+/* 864.0 MHz Configuration */
+static const struct alpha_pll_config cam_cc_pll3_config = {
+ .l = 0x2d,
+ .alpha = 0x0,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00182261,
+ .config_ctl_hi1_val = 0x82aa299c,
+ .test_ctl_val = 0x00000000,
+ .test_ctl_hi_val = 0x00000003,
+ .test_ctl_hi1_val = 0x00009000,
+ .test_ctl_hi2_val = 0x00000034,
+ .user_ctl_val = 0x00000400,
+ .user_ctl_hi_val = 0x00000005,
+};
+
+static struct clk_alpha_pll cam_cc_pll3 = {
+ .offset = 0x3000,
+ .config = &cam_cc_pll3_config,
+ .vco_table = lucid_ole_vco,
+ .num_vco = ARRAY_SIZE(lucid_ole_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr = {
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll3",
+ .parent_data = &(const struct clk_parent_data) {
+ .index = DT_BI_TCXO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_evo_ops,
+ },
+ },
+};
+
+static const struct clk_div_table post_div_table_cam_cc_pll3_out_even[] = {
+ { 0x1, 2 },
+ { }
+};
+
+static struct clk_alpha_pll_postdiv cam_cc_pll3_out_even = {
+ .offset = 0x3000,
+ .post_div_shift = 10,
+ .post_div_table = post_div_table_cam_cc_pll3_out_even,
+ .num_post_div = ARRAY_SIZE(post_div_table_cam_cc_pll3_out_even),
+ .width = 4,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll3_out_even",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_pll3.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_alpha_pll_postdiv_lucid_ole_ops,
+ },
+};
+
+/* 960.0 MHz Configuration */
+static const struct alpha_pll_config cam_cc_pll6_config = {
+ .l = 0x32,
+ .alpha = 0x0,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00182261,
+ .config_ctl_hi1_val = 0x82aa299c,
+ .test_ctl_val = 0x00000000,
+ .test_ctl_hi_val = 0x00000003,
+ .test_ctl_hi1_val = 0x00009000,
+ .test_ctl_hi2_val = 0x00000034,
+ .user_ctl_val = 0x00000400,
+ .user_ctl_hi_val = 0x00000005,
+};
+
+static struct clk_alpha_pll cam_cc_pll6 = {
+ .offset = 0x6000,
+ .config = &cam_cc_pll6_config,
+ .vco_table = lucid_ole_vco,
+ .num_vco = ARRAY_SIZE(lucid_ole_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr = {
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll6",
+ .parent_data = &(const struct clk_parent_data) {
+ .index = DT_BI_TCXO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_evo_ops,
+ },
+ },
+};
+
+static const struct clk_div_table post_div_table_cam_cc_pll6_out_even[] = {
+ { 0x1, 2 },
+ { }
+};
+
+static struct clk_alpha_pll_postdiv cam_cc_pll6_out_even = {
+ .offset = 0x6000,
+ .post_div_shift = 10,
+ .post_div_table = post_div_table_cam_cc_pll6_out_even,
+ .num_post_div = ARRAY_SIZE(post_div_table_cam_cc_pll6_out_even),
+ .width = 4,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll6_out_even",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_pll6.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_alpha_pll_postdiv_lucid_ole_ops,
+ },
+};
+
+static const struct parent_map cam_cc_parent_map_0[] = {
+ { P_BI_TCXO, 0 },
+ { P_CAM_CC_PLL0_OUT_MAIN, 1 },
+ { P_CAM_CC_PLL0_OUT_EVEN, 2 },
+ { P_CAM_CC_PLL0_OUT_ODD, 3 },
+ { P_CAM_CC_PLL6_OUT_EVEN, 5 },
+};
+
+static const struct clk_parent_data cam_cc_parent_data_0[] = {
+ { .index = DT_BI_TCXO },
+ { .hw = &cam_cc_pll0.clkr.hw },
+ { .hw = &cam_cc_pll0_out_even.clkr.hw },
+ { .hw = &cam_cc_pll0_out_odd.clkr.hw },
+ { .hw = &cam_cc_pll6_out_even.clkr.hw },
+};
+
+static const struct parent_map cam_cc_parent_map_1[] = {
+ { P_BI_TCXO, 0 },
+ { P_CAM_CC_PLL2_OUT_EVEN, 3 },
+ { P_CAM_CC_PLL2_OUT_MAIN, 5 },
+};
+
+static const struct clk_parent_data cam_cc_parent_data_1[] = {
+ { .index = DT_BI_TCXO },
+ { .hw = &cam_cc_pll2.clkr.hw },
+ { .hw = &cam_cc_pll2.clkr.hw },
+};
+
+static const struct parent_map cam_cc_parent_map_2[] = {
+ { P_BI_TCXO, 0 },
+ { P_CAM_CC_PLL3_OUT_EVEN, 6 },
+};
+
+static const struct clk_parent_data cam_cc_parent_data_2[] = {
+ { .index = DT_BI_TCXO },
+ { .hw = &cam_cc_pll3_out_even.clkr.hw },
+};
+
+static const struct parent_map cam_cc_parent_map_3[] = {
+ { P_BI_TCXO, 0 },
+ { P_CAM_CC_PLL1_OUT_EVEN, 4 },
+};
+
+static const struct clk_parent_data cam_cc_parent_data_3[] = {
+ { .index = DT_BI_TCXO },
+ { .hw = &cam_cc_pll1_out_even.clkr.hw },
+};
+
+static const struct parent_map cam_cc_parent_map_4[] = {
+ { P_SLEEP_CLK, 0 },
+};
+
+static const struct clk_parent_data cam_cc_parent_data_4[] = {
+ { .index = DT_SLEEP_CLK },
+};
+
+static const struct parent_map cam_cc_parent_map_5[] = {
+ { P_BI_TCXO, 0 },
+};
+
+static const struct clk_parent_data cam_cc_parent_data_5[] = {
+ { .index = DT_BI_TCXO },
+};
+
+static const struct freq_tbl ftbl_cam_cc_bps_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(200000000, P_CAM_CC_PLL0_OUT_ODD, 2, 0, 0),
+ F(400000000, P_CAM_CC_PLL0_OUT_ODD, 1, 0, 0),
+ F(600000000, P_CAM_CC_PLL0_OUT_EVEN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_bps_clk_src = {
+ .cmd_rcgr = 0x10278,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_bps_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_bps_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_camnoc_axi_rt_clk_src[] = {
+ F(300000000, P_CAM_CC_PLL0_OUT_EVEN, 2, 0, 0),
+ F(400000000, P_CAM_CC_PLL0_OUT_ODD, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_camnoc_axi_rt_clk_src = {
+ .cmd_rcgr = 0x138f8,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_camnoc_axi_rt_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_camnoc_axi_rt_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_cci_0_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(37500000, P_CAM_CC_PLL0_OUT_EVEN, 16, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_cci_0_clk_src = {
+ .cmd_rcgr = 0x1365c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_cci_0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cci_0_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_cci_1_clk_src = {
+ .cmd_rcgr = 0x1378c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_cci_0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cci_1_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_cphy_rx_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(400000000, P_CAM_CC_PLL0_OUT_MAIN, 3, 0, 0),
+ F(480000000, P_CAM_CC_PLL0_OUT_MAIN, 2.5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_cphy_rx_clk_src = {
+ .cmd_rcgr = 0x11164,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_cphy_rx_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cphy_rx_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_csi0phytimer_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(400000000, P_CAM_CC_PLL0_OUT_ODD, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_csi0phytimer_clk_src = {
+ .cmd_rcgr = 0x150e0,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_csi0phytimer_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi0phytimer_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_csi1phytimer_clk_src = {
+ .cmd_rcgr = 0x15104,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_csi0phytimer_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi1phytimer_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_csi2phytimer_clk_src = {
+ .cmd_rcgr = 0x15124,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_csi0phytimer_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi2phytimer_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_csi3phytimer_clk_src = {
+ .cmd_rcgr = 0x15258,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_csi0phytimer_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi3phytimer_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_csi4phytimer_clk_src = {
+ .cmd_rcgr = 0x1538c,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_csi0phytimer_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi4phytimer_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_csi5phytimer_clk_src = {
+ .cmd_rcgr = 0x154c0,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_csi0phytimer_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi5phytimer_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_csid_clk_src[] = {
+ F(400000000, P_CAM_CC_PLL0_OUT_MAIN, 3, 0, 0),
+ F(480000000, P_CAM_CC_PLL0_OUT_MAIN, 2.5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_csid_clk_src = {
+ .cmd_rcgr = 0x138d4,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_csid_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csid_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_fast_ahb_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(100000000, P_CAM_CC_PLL0_OUT_EVEN, 6, 0, 0),
+ F(200000000, P_CAM_CC_PLL0_OUT_EVEN, 3, 0, 0),
+ F(300000000, P_CAM_CC_PLL0_OUT_MAIN, 4, 0, 0),
+ F(400000000, P_CAM_CC_PLL0_OUT_MAIN, 3, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_fast_ahb_clk_src = {
+ .cmd_rcgr = 0x10018,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_fast_ahb_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_fast_ahb_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_icp_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(400000000, P_CAM_CC_PLL0_OUT_ODD, 1, 0, 0),
+ F(480000000, P_CAM_CC_PLL6_OUT_EVEN, 1, 0, 0),
+ F(600000000, P_CAM_CC_PLL0_OUT_MAIN, 2, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_icp_clk_src = {
+ .cmd_rcgr = 0x13520,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_icp_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_icp_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_ife_0_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(432000000, P_CAM_CC_PLL3_OUT_EVEN, 1, 0, 0),
+ F(594000000, P_CAM_CC_PLL3_OUT_EVEN, 1, 0, 0),
+ F(675000000, P_CAM_CC_PLL3_OUT_EVEN, 1, 0, 0),
+ F(727000000, P_CAM_CC_PLL3_OUT_EVEN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_ife_0_clk_src = {
+ .cmd_rcgr = 0x11018,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_2,
+ .freq_tbl = ftbl_cam_cc_ife_0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_0_clk_src",
+ .parent_data = cam_cc_parent_data_2,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_2),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_ife_lite_clk_src[] = {
+ F(400000000, P_CAM_CC_PLL0_OUT_ODD, 1, 0, 0),
+ F(480000000, P_CAM_CC_PLL6_OUT_EVEN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_ife_lite_clk_src = {
+ .cmd_rcgr = 0x13000,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_ife_lite_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_lite_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_ife_lite_csid_clk_src = {
+ .cmd_rcgr = 0x1313c,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_ife_lite_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_lite_csid_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_ipe_nps_clk_src[] = {
+ F(364000000, P_CAM_CC_PLL1_OUT_EVEN, 1, 0, 0),
+ F(500000000, P_CAM_CC_PLL1_OUT_EVEN, 1, 0, 0),
+ F(600000000, P_CAM_CC_PLL1_OUT_EVEN, 1, 0, 0),
+ F(700000000, P_CAM_CC_PLL1_OUT_EVEN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_ipe_nps_clk_src = {
+ .cmd_rcgr = 0x103cc,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_3,
+ .freq_tbl = ftbl_cam_cc_ipe_nps_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ipe_nps_clk_src",
+ .parent_data = cam_cc_parent_data_3,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_3),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_jpeg_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(200000000, P_CAM_CC_PLL0_OUT_ODD, 2, 0, 0),
+ F(400000000, P_CAM_CC_PLL0_OUT_ODD, 1, 0, 0),
+ F(480000000, P_CAM_CC_PLL6_OUT_EVEN, 1, 0, 0),
+ F(600000000, P_CAM_CC_PLL0_OUT_EVEN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_jpeg_clk_src = {
+ .cmd_rcgr = 0x133dc,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_jpeg_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_jpeg_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_mclk0_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(24000000, P_CAM_CC_PLL2_OUT_MAIN, 10, 1, 4),
+ F(68571429, P_CAM_CC_PLL2_OUT_MAIN, 14, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_mclk0_clk_src = {
+ .cmd_rcgr = 0x15000,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk0_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_mclk1_clk_src = {
+ .cmd_rcgr = 0x1501c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk1_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_mclk2_clk_src = {
+ .cmd_rcgr = 0x15038,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk2_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_mclk3_clk_src = {
+ .cmd_rcgr = 0x15054,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk3_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_mclk4_clk_src = {
+ .cmd_rcgr = 0x15070,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk4_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_mclk5_clk_src = {
+ .cmd_rcgr = 0x1508c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk5_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_mclk6_clk_src = {
+ .cmd_rcgr = 0x150a8,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk6_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_mclk7_clk_src = {
+ .cmd_rcgr = 0x150c4,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk7_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_qdss_debug_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(75000000, P_CAM_CC_PLL0_OUT_EVEN, 8, 0, 0),
+ F(150000000, P_CAM_CC_PLL0_OUT_EVEN, 4, 0, 0),
+ F(300000000, P_CAM_CC_PLL0_OUT_MAIN, 4, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_qdss_debug_clk_src = {
+ .cmd_rcgr = 0x13938,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_qdss_debug_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_qdss_debug_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_sleep_clk_src[] = {
+ F(32000, P_SLEEP_CLK, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_sleep_clk_src = {
+ .cmd_rcgr = 0x13aa0,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_4,
+ .freq_tbl = ftbl_cam_cc_sleep_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_sleep_clk_src",
+ .parent_data = cam_cc_parent_data_4,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_4),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_slow_ahb_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(80000000, P_CAM_CC_PLL0_OUT_EVEN, 7.5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_slow_ahb_clk_src = {
+ .cmd_rcgr = 0x10148,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_slow_ahb_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_slow_ahb_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_xo_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_xo_clk_src = {
+ .cmd_rcgr = 0x13a84,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_5,
+ .freq_tbl = ftbl_cam_cc_xo_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_xo_clk_src",
+ .parent_data = cam_cc_parent_data_5,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_5),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_branch cam_cc_bps_ahb_clk = {
+ .halt_reg = 0x10274,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x10274,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_bps_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_slow_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_bps_clk = {
+ .halt_reg = 0x103a4,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x103a4,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_bps_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_bps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_bps_fast_ahb_clk = {
+ .halt_reg = 0x10144,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x10144,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_bps_fast_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_fast_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_camnoc_axi_nrt_clk = {
+ .halt_reg = 0x13920,
+ .halt_check = BRANCH_HALT_VOTED,
+ .hwcg_reg = 0x13920,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x13920,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_camnoc_axi_nrt_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_camnoc_axi_rt_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_camnoc_axi_rt_clk = {
+ .halt_reg = 0x13910,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13910,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_camnoc_axi_rt_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_camnoc_axi_rt_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_camnoc_dcd_xo_clk = {
+ .halt_reg = 0x1392c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1392c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_camnoc_dcd_xo_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_camnoc_xo_clk = {
+ .halt_reg = 0x13930,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13930,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_camnoc_xo_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_cci_0_clk = {
+ .halt_reg = 0x13788,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13788,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cci_0_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cci_0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_cci_1_clk = {
+ .halt_reg = 0x138b8,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x138b8,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cci_1_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cci_1_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_core_ahb_clk = {
+ .halt_reg = 0x13a80,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x13a80,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_core_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_slow_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_cpas_ahb_clk = {
+ .halt_reg = 0x138bc,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x138bc,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cpas_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_slow_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_cpas_bps_clk = {
+ .halt_reg = 0x103b0,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x103b0,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cpas_bps_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_bps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_cpas_fast_ahb_clk = {
+ .halt_reg = 0x138c8,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x138c8,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cpas_fast_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_fast_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_cpas_ife_0_clk = {
+ .halt_reg = 0x11150,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x11150,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cpas_ife_0_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_ife_0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_cpas_ife_lite_clk = {
+ .halt_reg = 0x13138,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13138,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cpas_ife_lite_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_ife_lite_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_cpas_ipe_nps_clk = {
+ .halt_reg = 0x10504,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x10504,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cpas_ipe_nps_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_ipe_nps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csi0phytimer_clk = {
+ .halt_reg = 0x150f8,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x150f8,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi0phytimer_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_csi0phytimer_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csi1phytimer_clk = {
+ .halt_reg = 0x1511c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1511c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi1phytimer_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_csi1phytimer_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csi2phytimer_clk = {
+ .halt_reg = 0x15250,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15250,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi2phytimer_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_csi2phytimer_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csi3phytimer_clk = {
+ .halt_reg = 0x15384,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15384,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi3phytimer_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_csi3phytimer_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csi4phytimer_clk = {
+ .halt_reg = 0x154b8,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x154b8,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi4phytimer_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_csi4phytimer_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csi5phytimer_clk = {
+ .halt_reg = 0x155ec,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x155ec,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi5phytimer_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_csi5phytimer_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csid_clk = {
+ .halt_reg = 0x138ec,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x138ec,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csid_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_csid_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csid_csiphy_rx_clk = {
+ .halt_reg = 0x15100,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15100,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csid_csiphy_rx_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csiphy0_clk = {
+ .halt_reg = 0x150fc,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x150fc,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csiphy0_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csiphy1_clk = {
+ .halt_reg = 0x15120,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15120,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csiphy1_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csiphy2_clk = {
+ .halt_reg = 0x15254,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15254,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csiphy2_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csiphy3_clk = {
+ .halt_reg = 0x15388,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15388,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csiphy3_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csiphy4_clk = {
+ .halt_reg = 0x154bc,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x154bc,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csiphy4_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csiphy5_clk = {
+ .halt_reg = 0x155f0,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x155f0,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csiphy5_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_icp_ahb_clk = {
+ .halt_reg = 0x13658,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13658,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_icp_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_slow_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_icp_clk = {
+ .halt_reg = 0x1364c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1364c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_icp_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_icp_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_0_clk = {
+ .halt_reg = 0x11144,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x11144,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_0_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_ife_0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_0_dsp_clk = {
+ .halt_reg = 0x11154,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x11154,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_0_dsp_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_ife_0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_0_fast_ahb_clk = {
+ .halt_reg = 0x11160,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x11160,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_0_fast_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_fast_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_lite_ahb_clk = {
+ .halt_reg = 0x13278,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13278,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_lite_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_slow_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_lite_clk = {
+ .halt_reg = 0x1312c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1312c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_lite_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_ife_lite_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_lite_cphy_rx_clk = {
+ .halt_reg = 0x13274,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13274,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_lite_cphy_rx_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_lite_csid_clk = {
+ .halt_reg = 0x13268,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13268,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_lite_csid_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_ife_lite_csid_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ipe_nps_ahb_clk = {
+ .halt_reg = 0x1051c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1051c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ipe_nps_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_slow_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ipe_nps_clk = {
+ .halt_reg = 0x104f8,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x104f8,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ipe_nps_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_ipe_nps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ipe_nps_fast_ahb_clk = {
+ .halt_reg = 0x10520,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x10520,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ipe_nps_fast_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_fast_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ipe_pps_clk = {
+ .halt_reg = 0x10508,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x10508,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ipe_pps_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_ipe_nps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ipe_pps_fast_ahb_clk = {
+ .halt_reg = 0x10524,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x10524,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ipe_pps_fast_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_fast_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_jpeg_clk = {
+ .halt_reg = 0x13508,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13508,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_jpeg_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_jpeg_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk0_clk = {
+ .halt_reg = 0x15018,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15018,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk0_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_mclk0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk1_clk = {
+ .halt_reg = 0x15034,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15034,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk1_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_mclk1_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk2_clk = {
+ .halt_reg = 0x15050,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15050,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk2_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_mclk2_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk3_clk = {
+ .halt_reg = 0x1506c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1506c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk3_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_mclk3_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk4_clk = {
+ .halt_reg = 0x15088,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15088,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk4_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_mclk4_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk5_clk = {
+ .halt_reg = 0x150a4,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x150a4,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk5_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_mclk5_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk6_clk = {
+ .halt_reg = 0x150c0,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x150c0,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk6_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_mclk6_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk7_clk = {
+ .halt_reg = 0x150dc,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x150dc,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk7_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_mclk7_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_qdss_debug_clk = {
+ .halt_reg = 0x13a64,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13a64,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_qdss_debug_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_qdss_debug_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_qdss_debug_xo_clk = {
+ .halt_reg = 0x13a68,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13a68,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_qdss_debug_xo_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct gdsc cam_cc_titan_top_gdsc = {
+ .gdscr = 0x13a6c,
+ .en_rest_wait_val = 0x2,
+ .en_few_wait_val = 0x2,
+ .clk_dis_wait_val = 0xf,
+ .pd = {
+ .name = "cam_cc_titan_top_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+};
+
+static struct gdsc cam_cc_bps_gdsc = {
+ .gdscr = 0x10004,
+ .en_rest_wait_val = 0x2,
+ .en_few_wait_val = 0x2,
+ .clk_dis_wait_val = 0xf,
+ .pd = {
+ .name = "cam_cc_bps_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .parent = &cam_cc_titan_top_gdsc.pd,
+ .flags = HW_CTRL_TRIGGER | POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+};
+
+static struct gdsc cam_cc_ife_0_gdsc = {
+ .gdscr = 0x11004,
+ .en_rest_wait_val = 0x2,
+ .en_few_wait_val = 0x2,
+ .clk_dis_wait_val = 0xf,
+ .pd = {
+ .name = "cam_cc_ife_0_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .parent = &cam_cc_titan_top_gdsc.pd,
+ .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+};
+
+static struct gdsc cam_cc_ipe_0_gdsc = {
+ .gdscr = 0x103b8,
+ .en_rest_wait_val = 0x2,
+ .en_few_wait_val = 0x2,
+ .clk_dis_wait_val = 0xf,
+ .pd = {
+ .name = "cam_cc_ipe_0_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .parent = &cam_cc_titan_top_gdsc.pd,
+ .flags = HW_CTRL_TRIGGER | POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+};
+
+static struct clk_regmap *cam_cc_x1p42100_clocks[] = {
+ [CAM_CC_BPS_AHB_CLK] = &cam_cc_bps_ahb_clk.clkr,
+ [CAM_CC_BPS_CLK] = &cam_cc_bps_clk.clkr,
+ [CAM_CC_BPS_CLK_SRC] = &cam_cc_bps_clk_src.clkr,
+ [CAM_CC_BPS_FAST_AHB_CLK] = &cam_cc_bps_fast_ahb_clk.clkr,
+ [CAM_CC_CAMNOC_AXI_NRT_CLK] = &cam_cc_camnoc_axi_nrt_clk.clkr,
+ [CAM_CC_CAMNOC_AXI_RT_CLK] = &cam_cc_camnoc_axi_rt_clk.clkr,
+ [CAM_CC_CAMNOC_AXI_RT_CLK_SRC] = &cam_cc_camnoc_axi_rt_clk_src.clkr,
+ [CAM_CC_CAMNOC_DCD_XO_CLK] = &cam_cc_camnoc_dcd_xo_clk.clkr,
+ [CAM_CC_CAMNOC_XO_CLK] = &cam_cc_camnoc_xo_clk.clkr,
+ [CAM_CC_CCI_0_CLK] = &cam_cc_cci_0_clk.clkr,
+ [CAM_CC_CCI_0_CLK_SRC] = &cam_cc_cci_0_clk_src.clkr,
+ [CAM_CC_CCI_1_CLK] = &cam_cc_cci_1_clk.clkr,
+ [CAM_CC_CCI_1_CLK_SRC] = &cam_cc_cci_1_clk_src.clkr,
+ [CAM_CC_CORE_AHB_CLK] = &cam_cc_core_ahb_clk.clkr,
+ [CAM_CC_CPAS_AHB_CLK] = &cam_cc_cpas_ahb_clk.clkr,
+ [CAM_CC_CPAS_BPS_CLK] = &cam_cc_cpas_bps_clk.clkr,
+ [CAM_CC_CPAS_FAST_AHB_CLK] = &cam_cc_cpas_fast_ahb_clk.clkr,
+ [CAM_CC_CPAS_IFE_0_CLK] = &cam_cc_cpas_ife_0_clk.clkr,
+ [CAM_CC_CPAS_IFE_LITE_CLK] = &cam_cc_cpas_ife_lite_clk.clkr,
+ [CAM_CC_CPAS_IPE_NPS_CLK] = &cam_cc_cpas_ipe_nps_clk.clkr,
+ [CAM_CC_CPHY_RX_CLK_SRC] = &cam_cc_cphy_rx_clk_src.clkr,
+ [CAM_CC_CSI0PHYTIMER_CLK] = &cam_cc_csi0phytimer_clk.clkr,
+ [CAM_CC_CSI0PHYTIMER_CLK_SRC] = &cam_cc_csi0phytimer_clk_src.clkr,
+ [CAM_CC_CSI1PHYTIMER_CLK] = &cam_cc_csi1phytimer_clk.clkr,
+ [CAM_CC_CSI1PHYTIMER_CLK_SRC] = &cam_cc_csi1phytimer_clk_src.clkr,
+ [CAM_CC_CSI2PHYTIMER_CLK] = &cam_cc_csi2phytimer_clk.clkr,
+ [CAM_CC_CSI2PHYTIMER_CLK_SRC] = &cam_cc_csi2phytimer_clk_src.clkr,
+ [CAM_CC_CSI3PHYTIMER_CLK] = &cam_cc_csi3phytimer_clk.clkr,
+ [CAM_CC_CSI3PHYTIMER_CLK_SRC] = &cam_cc_csi3phytimer_clk_src.clkr,
+ [CAM_CC_CSI4PHYTIMER_CLK] = &cam_cc_csi4phytimer_clk.clkr,
+ [CAM_CC_CSI4PHYTIMER_CLK_SRC] = &cam_cc_csi4phytimer_clk_src.clkr,
+ [CAM_CC_CSI5PHYTIMER_CLK] = &cam_cc_csi5phytimer_clk.clkr,
+ [CAM_CC_CSI5PHYTIMER_CLK_SRC] = &cam_cc_csi5phytimer_clk_src.clkr,
+ [CAM_CC_CSID_CLK] = &cam_cc_csid_clk.clkr,
+ [CAM_CC_CSID_CLK_SRC] = &cam_cc_csid_clk_src.clkr,
+ [CAM_CC_CSID_CSIPHY_RX_CLK] = &cam_cc_csid_csiphy_rx_clk.clkr,
+ [CAM_CC_CSIPHY0_CLK] = &cam_cc_csiphy0_clk.clkr,
+ [CAM_CC_CSIPHY1_CLK] = &cam_cc_csiphy1_clk.clkr,
+ [CAM_CC_CSIPHY2_CLK] = &cam_cc_csiphy2_clk.clkr,
+ [CAM_CC_CSIPHY3_CLK] = &cam_cc_csiphy3_clk.clkr,
+ [CAM_CC_CSIPHY4_CLK] = &cam_cc_csiphy4_clk.clkr,
+ [CAM_CC_CSIPHY5_CLK] = &cam_cc_csiphy5_clk.clkr,
+ [CAM_CC_FAST_AHB_CLK_SRC] = &cam_cc_fast_ahb_clk_src.clkr,
+ [CAM_CC_ICP_AHB_CLK] = &cam_cc_icp_ahb_clk.clkr,
+ [CAM_CC_ICP_CLK] = &cam_cc_icp_clk.clkr,
+ [CAM_CC_ICP_CLK_SRC] = &cam_cc_icp_clk_src.clkr,
+ [CAM_CC_IFE_0_CLK] = &cam_cc_ife_0_clk.clkr,
+ [CAM_CC_IFE_0_CLK_SRC] = &cam_cc_ife_0_clk_src.clkr,
+ [CAM_CC_IFE_0_DSP_CLK] = &cam_cc_ife_0_dsp_clk.clkr,
+ [CAM_CC_IFE_0_FAST_AHB_CLK] = &cam_cc_ife_0_fast_ahb_clk.clkr,
+ [CAM_CC_IFE_LITE_AHB_CLK] = &cam_cc_ife_lite_ahb_clk.clkr,
+ [CAM_CC_IFE_LITE_CLK] = &cam_cc_ife_lite_clk.clkr,
+ [CAM_CC_IFE_LITE_CLK_SRC] = &cam_cc_ife_lite_clk_src.clkr,
+ [CAM_CC_IFE_LITE_CPHY_RX_CLK] = &cam_cc_ife_lite_cphy_rx_clk.clkr,
+ [CAM_CC_IFE_LITE_CSID_CLK] = &cam_cc_ife_lite_csid_clk.clkr,
+ [CAM_CC_IFE_LITE_CSID_CLK_SRC] = &cam_cc_ife_lite_csid_clk_src.clkr,
+ [CAM_CC_IPE_NPS_AHB_CLK] = &cam_cc_ipe_nps_ahb_clk.clkr,
+ [CAM_CC_IPE_NPS_CLK] = &cam_cc_ipe_nps_clk.clkr,
+ [CAM_CC_IPE_NPS_CLK_SRC] = &cam_cc_ipe_nps_clk_src.clkr,
+ [CAM_CC_IPE_NPS_FAST_AHB_CLK] = &cam_cc_ipe_nps_fast_ahb_clk.clkr,
+ [CAM_CC_IPE_PPS_CLK] = &cam_cc_ipe_pps_clk.clkr,
+ [CAM_CC_IPE_PPS_FAST_AHB_CLK] = &cam_cc_ipe_pps_fast_ahb_clk.clkr,
+ [CAM_CC_JPEG_CLK] = &cam_cc_jpeg_clk.clkr,
+ [CAM_CC_JPEG_CLK_SRC] = &cam_cc_jpeg_clk_src.clkr,
+ [CAM_CC_MCLK0_CLK] = &cam_cc_mclk0_clk.clkr,
+ [CAM_CC_MCLK0_CLK_SRC] = &cam_cc_mclk0_clk_src.clkr,
+ [CAM_CC_MCLK1_CLK] = &cam_cc_mclk1_clk.clkr,
+ [CAM_CC_MCLK1_CLK_SRC] = &cam_cc_mclk1_clk_src.clkr,
+ [CAM_CC_MCLK2_CLK] = &cam_cc_mclk2_clk.clkr,
+ [CAM_CC_MCLK2_CLK_SRC] = &cam_cc_mclk2_clk_src.clkr,
+ [CAM_CC_MCLK3_CLK] = &cam_cc_mclk3_clk.clkr,
+ [CAM_CC_MCLK3_CLK_SRC] = &cam_cc_mclk3_clk_src.clkr,
+ [CAM_CC_MCLK4_CLK] = &cam_cc_mclk4_clk.clkr,
+ [CAM_CC_MCLK4_CLK_SRC] = &cam_cc_mclk4_clk_src.clkr,
+ [CAM_CC_MCLK5_CLK] = &cam_cc_mclk5_clk.clkr,
+ [CAM_CC_MCLK5_CLK_SRC] = &cam_cc_mclk5_clk_src.clkr,
+ [CAM_CC_MCLK6_CLK] = &cam_cc_mclk6_clk.clkr,
+ [CAM_CC_MCLK6_CLK_SRC] = &cam_cc_mclk6_clk_src.clkr,
+ [CAM_CC_MCLK7_CLK] = &cam_cc_mclk7_clk.clkr,
+ [CAM_CC_MCLK7_CLK_SRC] = &cam_cc_mclk7_clk_src.clkr,
+ [CAM_CC_PLL0] = &cam_cc_pll0.clkr,
+ [CAM_CC_PLL0_OUT_EVEN] = &cam_cc_pll0_out_even.clkr,
+ [CAM_CC_PLL0_OUT_ODD] = &cam_cc_pll0_out_odd.clkr,
+ [CAM_CC_PLL1] = &cam_cc_pll1.clkr,
+ [CAM_CC_PLL1_OUT_EVEN] = &cam_cc_pll1_out_even.clkr,
+ [CAM_CC_PLL2] = &cam_cc_pll2.clkr,
+ [CAM_CC_PLL3] = &cam_cc_pll3.clkr,
+ [CAM_CC_PLL3_OUT_EVEN] = &cam_cc_pll3_out_even.clkr,
+ [CAM_CC_PLL6] = &cam_cc_pll6.clkr,
+ [CAM_CC_PLL6_OUT_EVEN] = &cam_cc_pll6_out_even.clkr,
+ [CAM_CC_QDSS_DEBUG_CLK] = &cam_cc_qdss_debug_clk.clkr,
+ [CAM_CC_QDSS_DEBUG_CLK_SRC] = &cam_cc_qdss_debug_clk_src.clkr,
+ [CAM_CC_QDSS_DEBUG_XO_CLK] = &cam_cc_qdss_debug_xo_clk.clkr,
+ [CAM_CC_SLEEP_CLK_SRC] = &cam_cc_sleep_clk_src.clkr,
+ [CAM_CC_SLOW_AHB_CLK_SRC] = &cam_cc_slow_ahb_clk_src.clkr,
+ [CAM_CC_XO_CLK_SRC] = &cam_cc_xo_clk_src.clkr,
+};
+
+static struct gdsc *cam_cc_x1p42100_gdscs[] = {
+ [CAM_CC_BPS_GDSC] = &cam_cc_bps_gdsc,
+ [CAM_CC_IFE_0_GDSC] = &cam_cc_ife_0_gdsc,
+ [CAM_CC_IPE_0_GDSC] = &cam_cc_ipe_0_gdsc,
+ [CAM_CC_TITAN_TOP_GDSC] = &cam_cc_titan_top_gdsc,
+};
+
+static const struct qcom_reset_map cam_cc_x1p42100_resets[] = {
+ [CAM_CC_BPS_BCR] = { 0x10000 },
+ [CAM_CC_ICP_BCR] = { 0x1351c },
+ [CAM_CC_IFE_0_BCR] = { 0x11000 },
+ [CAM_CC_IPE_0_BCR] = { 0x103b4 },
+};
+
+static struct clk_alpha_pll *cam_cc_x1p42100_plls[] = {
+ &cam_cc_pll0,
+ &cam_cc_pll1,
+ &cam_cc_pll2,
+ &cam_cc_pll3,
+ &cam_cc_pll6,
+};
+
+static u32 cam_cc_x1p42100_critical_cbcrs[] = {
+ 0x13a9c, /* CAM_CC_GDSC_CLK */
+ 0x13ab8, /* CAM_CC_SLEEP_CLK */
+};
+
+static const struct regmap_config cam_cc_x1p42100_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x1603c,
+ .fast_io = true,
+};
+
+static struct qcom_cc_driver_data cam_cc_x1p42100_driver_data = {
+ .alpha_plls = cam_cc_x1p42100_plls,
+ .num_alpha_plls = ARRAY_SIZE(cam_cc_x1p42100_plls),
+ .clk_cbcrs = cam_cc_x1p42100_critical_cbcrs,
+ .num_clk_cbcrs = ARRAY_SIZE(cam_cc_x1p42100_critical_cbcrs),
+};
+
+static struct qcom_cc_desc cam_cc_x1p42100_desc = {
+ .config = &cam_cc_x1p42100_regmap_config,
+ .clks = cam_cc_x1p42100_clocks,
+ .num_clks = ARRAY_SIZE(cam_cc_x1p42100_clocks),
+ .resets = cam_cc_x1p42100_resets,
+ .num_resets = ARRAY_SIZE(cam_cc_x1p42100_resets),
+ .gdscs = cam_cc_x1p42100_gdscs,
+ .num_gdscs = ARRAY_SIZE(cam_cc_x1p42100_gdscs),
+ .use_rpm = true,
+ .driver_data = &cam_cc_x1p42100_driver_data,
+};
+
+static const struct of_device_id cam_cc_x1p42100_match_table[] = {
+ { .compatible = "qcom,x1p42100-camcc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, cam_cc_x1p42100_match_table);
+
+static int cam_cc_x1p42100_probe(struct platform_device *pdev)
+{
+ return qcom_cc_probe(pdev, &cam_cc_x1p42100_desc);
+}
+
+static struct platform_driver cam_cc_x1p42100_driver = {
+ .probe = cam_cc_x1p42100_probe,
+ .driver = {
+ .name = "camcc-x1p42100",
+ .of_match_table = cam_cc_x1p42100_match_table,
+ },
+};
+
+module_platform_driver(cam_cc_x1p42100_driver);
+
+MODULE_DESCRIPTION("QTI CAMCC X1P42100 Driver");
+MODULE_LICENSE("GPL");
--
2.34.1
^ permalink raw reply related
* [PATCH v4 6/7] arm64: dts: qcom: x1e80100: Add CAMCC block definition
From: Jagadeesh Kona @ 2026-04-09 9:21 UTC (permalink / raw)
To: Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jagadeesh Kona,
Bryan O'Donoghue, Konrad Dybcio
Cc: Ajit Pandey, Imran Shaik, Taniya Das, linux-arm-msm, linux-clk,
devicetree, linux-kernel, Jagadeesh Kona, Vladimir Zapolskiy,
Konrad Dybcio, Abel Vesa
In-Reply-To: <20260409-purwa-videocc-camcc-v4-0-5a8e5f2dd4b2@oss.qualcomm.com>
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Add the CAMCC block for x1e80100. The x1e80100 CAMCC block is an iteration
of previous CAMCC blocks with the exception of having two required
power-domains not just one. And update the compatible for camcc and
videocc nodes on Purwa to match with their respective Purwa (X1P42100)
specific drivers.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/hamoa.dtsi | 17 +++++++++++++++++
arch/arm64/boot/dts/qcom/purwa.dtsi | 10 ++++++++++
2 files changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/hamoa.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi
index 051dee0764167338023c96342d895f2871a61c59..a736ff0508be9b3c12975f8af3e06effc662a7ab 100644
--- a/arch/arm64/boot/dts/qcom/hamoa.dtsi
+++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
#include <dt-bindings/clock/qcom,sm8450-videocc.h>
+#include <dt-bindings/clock/qcom,x1e80100-camcc.h>
#include <dt-bindings/clock/qcom,x1e80100-dispcc.h>
#include <dt-bindings/clock/qcom,x1e80100-gcc.h>
#include <dt-bindings/clock/qcom,x1e80100-gpucc.h>
@@ -5550,6 +5551,22 @@ videocc: clock-controller@aaf0000 {
#power-domain-cells = <1>;
};
+ camcc: clock-controller@ade0000 {
+ compatible = "qcom,x1e80100-camcc";
+ reg = <0 0x0ade0000 0 0x20000>;
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&bi_tcxo_div2>,
+ <&bi_tcxo_ao_div2>,
+ <&sleep_clk>;
+ power-domains = <&rpmhpd RPMHPD_MXC>,
+ <&rpmhpd RPMHPD_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>,
+ <&rpmhpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
mdss: display-subsystem@ae00000 {
compatible = "qcom,x1e80100-mdss";
reg = <0 0x0ae00000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/qcom/purwa.dtsi b/arch/arm64/boot/dts/qcom/purwa.dtsi
index 9ab4f26b35f298ad7c6c361b3e232edf07baf223..ea65b8448836ead83f837e973ed536e8ea0ed8ef 100644
--- a/arch/arm64/boot/dts/qcom/purwa.dtsi
+++ b/arch/arm64/boot/dts/qcom/purwa.dtsi
@@ -6,6 +6,8 @@
/* X1P42100 is heavily based on hamoa, with some meaningful differences */
#include "hamoa.dtsi"
+#include <dt-bindings/clock/qcom,x1p42100-videocc.h>
+
/delete-node/ &bwmon_cluster0;
/delete-node/ &cluster_pd2;
/delete-node/ &cpu_map_cluster2;
@@ -36,10 +38,18 @@
/delete-node/ &thermal_gpuss_6;
/delete-node/ &thermal_gpuss_7;
+&camcc {
+ compatible = "qcom,x1p42100-camcc";
+};
+
&gcc {
compatible = "qcom,x1p42100-gcc", "qcom,x1e80100-gcc";
};
+&videocc {
+ compatible = "qcom,x1p42100-videocc";
+};
+
&gmu {
compatible = "qcom,adreno-gmu-x145.0", "qcom,adreno-gmu";
};
--
2.34.1
^ permalink raw reply related
* [PATCH v4 7/7] arm64: defconfig: Enable VIDEOCC and CAMCC drivers on Qualcomm X1P42100
From: Jagadeesh Kona @ 2026-04-09 9:21 UTC (permalink / raw)
To: Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jagadeesh Kona,
Bryan O'Donoghue, Konrad Dybcio
Cc: Ajit Pandey, Imran Shaik, Taniya Das, linux-arm-msm, linux-clk,
devicetree, linux-kernel, Jagadeesh Kona, Krzysztof Kozlowski
In-Reply-To: <20260409-purwa-videocc-camcc-v4-0-5a8e5f2dd4b2@oss.qualcomm.com>
Enable video and camera clock controller drivers for their respective
functionalities on Qualcomm X1P42100-CRD and similar other platforms
with Snapdragon X1P42100 SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
---
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index e44e83bc57812aaed21bff1b12d36ae4a373ce11..44dc5da9805ef01b30c39ad2235f9d294515b360 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1492,7 +1492,9 @@ CONFIG_CLK_X1E80100_DISPCC=m
CONFIG_CLK_X1E80100_GCC=y
CONFIG_CLK_X1E80100_GPUCC=m
CONFIG_CLK_X1E80100_TCSRCC=y
+CONFIG_CLK_X1P42100_CAMCC=m
CONFIG_CLK_X1P42100_GPUCC=m
+CONFIG_CLK_X1P42100_VIDEOCC=m
CONFIG_CLK_QCM2290_GPUCC=m
CONFIG_QCOM_A53PLL=y
CONFIG_QCOM_CLK_APCS_MSM8916=y
--
2.34.1
^ permalink raw reply related
* Re: [PATCH 10/19] drm/panel: himax-hx8394: support Waveshare DSI panels
From: Javier Martinez Canillas @ 2026-04-09 9:27 UTC (permalink / raw)
To: Dmitry Baryshkov, Neil Armstrong, Jessica Zhang, David Airlie,
Simona Vetter, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Cong Yang, Ondrej Jirman, Jagan Teki, Liam Girdwood, Mark Brown,
Linus Walleij, Bartosz Golaszewski
Cc: dri-devel, devicetree, linux-kernel, linux-gpio
In-Reply-To: <20260401-waveshare-dsi-touch-v1-10-5e9119b5a014@oss.qualcomm.com>
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> writes:
> Enable support for Waveshare 5.0" and 5.5" DSI TOUCH-A panels.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> ---
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
--
Best regards,
Javier Martinez Canillas
Core Platforms
Red Hat
^ permalink raw reply
* [PATCH] arm64: dts: qcom: ipq5210: add the bootph-all property
From: Kathiravan Thirumoorthy @ 2026-04-09 9:28 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Kathiravan Thirumoorthy
Add the bootph-all property to the nodes which are utilized by the
bootloaders.
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts | 5 +++++
arch/arm64/boot/dts/qcom/ipq5210.dtsi | 10 ++++++++++
2 files changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts b/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts
index 941f866ecfe9..56dbc506da78 100644
--- a/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts
@@ -17,6 +17,7 @@ aliases {
chosen {
stdout-path = "serial0";
+ bootph-all;
};
};
@@ -41,6 +42,7 @@ qup_uart1_default_state: qup-uart1-default-state {
function = "qup_se1";
drive-strength = <6>;
bias-pull-down;
+ bootph-all;
};
sdhc_default_state: sdhc-default-state {
@@ -49,6 +51,7 @@ clk-pins {
function = "sdc_clk";
drive-strength = <8>;
bias-disable;
+ bootph-all;
};
cmd-pins {
@@ -56,6 +59,7 @@ cmd-pins {
function = "sdc_cmd";
drive-strength = <8>;
bias-pull-up;
+ bootph-all;
};
data-pins {
@@ -63,6 +67,7 @@ data-pins {
function = "sdc_data";
drive-strength = <8>;
bias-pull-up;
+ bootph-all;
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/ipq5210.dtsi b/arch/arm64/boot/dts/qcom/ipq5210.dtsi
index 3761eb03ab24..e0a90b16b097 100644
--- a/arch/arm64/boot/dts/qcom/ipq5210.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5210.dtsi
@@ -14,11 +14,13 @@ / {
clocks {
sleep_clk: sleep-clk {
+ bootph-all;
compatible = "fixed-clock";
#clock-cells = <0>;
};
xo_board: xo-board-clk {
+ bootph-all;
compatible = "fixed-clock";
#clock-cells = <0>;
};
@@ -98,6 +100,7 @@ reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
+ bootph-all;
bootloader@87800000 {
reg = <0x0 0x87800000 0x0 0x400000>;
@@ -108,6 +111,7 @@ smem@87c00000 {
compatible = "qcom,smem";
reg = <0x0 0x87c00000 0x0 0x40000>;
no-map;
+ bootph-all;
hwlocks = <&tcsr_mutex 3>;
};
@@ -129,6 +133,7 @@ soc@0 {
#size-cells = <2>;
dma-ranges = <0 0 0 0 0x10 0>;
ranges = <0 0 0 0 0x10 0>;
+ bootph-all;
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq5210-tlmm";
@@ -139,6 +144,7 @@ tlmm: pinctrl@1000000 {
gpio-ranges = <&tlmm 0 0 54>;
interrupt-controller;
#interrupt-cells = <2>;
+ bootph-all;
};
gcc: clock-controller@1800000 {
@@ -152,6 +158,7 @@ gcc: clock-controller@1800000 {
<0>;
#clock-cells = <1>;
#reset-cells = <1>;
+ bootph-all;
};
tcsr_mutex: hwlock@1905000 {
@@ -169,6 +176,7 @@ qupv3: geniqup@1ac0000 {
ranges;
#address-cells = <2>;
#size-cells = <2>;
+ bootph-all;
uart1: serial@1a84000 {
compatible = "qcom,geni-debug-uart";
@@ -176,6 +184,7 @@ uart1: serial@1a84000 {
clocks = <&gcc GCC_QUPV3_WRAP_SE1_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ bootph-all;
status = "disabled";
};
@@ -200,6 +209,7 @@ sdhc: mmc@7804000 {
"core",
"xo";
non-removable;
+ bootph-all;
status = "disabled";
};
---
base-commit: db7efce4ae23ad5e42f5f55428f529ff62b86fab
change-id: 20260409-add_bootph-0c68315784c5
Best regards,
--
Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
^ permalink raw reply related
* [PATCH v1] arm64: dts: freescale: imx95-verdin-ivy: fix RS485 RTS polarity
From: Francesco Dolcini @ 2026-04-09 9:33 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
Cc: Francesco Dolcini, devicetree, imx, linux-arm-kernel,
linux-kernel
From: Francesco Dolcini <francesco.dolcini@toradex.com>
Fix the RS485 functionality, the RS485 RTS signal is active high on Ivy.
Fixes: f33a1f9a942c ("arm64: dts: freescale: imx95-verdin: Add Ivy carrier board")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
arch/arm64/boot/dts/freescale/imx95-verdin-ivy.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx95-verdin-ivy.dtsi b/arch/arm64/boot/dts/freescale/imx95-verdin-ivy.dtsi
index 8337c8b25f05..ff31f7c48cfb 100644
--- a/arch/arm64/boot/dts/freescale/imx95-verdin-ivy.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95-verdin-ivy.dtsi
@@ -452,7 +452,6 @@ &lpuart7 {
/* Verdin UART_2, through RS485 transceiver */
&lpuart8 {
- rs485-rts-active-low;
rs485-rx-during-tx;
linux,rs485-enabled-at-boot-time;
--
2.47.3
^ permalink raw reply related
* Re: [PATCH v3 0/7] arm64: dts: ti: k3-am62a7-sk: Split r5f memory region
From: Vignesh Raghavendra @ 2026-04-09 9:46 UTC (permalink / raw)
To: Rob Herring, Markus Schneider-Pargmann (TI)
Cc: Bjorn Andersson, Mathieu Poirier, Krzysztof Kozlowski,
Conor Dooley, Suman Anna, Nishanth Menon, Tero Kristo,
Vishal Mahaveer, Kevin Hilman, Dhruva Gole, Sebin Francis,
Kendall Willis, Akashdeep Kaur, linux-remoteproc, devicetree,
linux-kernel, linux-arm-kernel
In-Reply-To: <CAL_JsqJq=3z7SQX_26MGGRcmysnGHVke8aTwyDCesvOuQjEN+g@mail.gmail.com>
Hi Markus
On 08/04/26 20:33, Rob Herring wrote:
> On Wed, Mar 18, 2026 at 10:14 AM Markus Schneider-Pargmann (TI)
> <msp@baylibre.com> wrote:
>>
>> Hi,
>>
>> Split the firmware memory region in more specific parts so it is better
>> described where which information is stored. Specifically the LPM metadata
>> region is important as bootloader software like U-Boot has to know where
>> that data is to be able to read that data and resume from RAM.
>>
>> IO+DDR is a deep sleep state in which a few pins are set to be sensitive
>> for wakeup while the DDR is kept in self refresh. Everything else is
>> powered off.
>>
>> The changes in this series were suggested as part of the IO+DDR u-boot series:
>> https://lore.kernel.org/r/814c211f-a9eb-4311-bb84-165b1a69755f@ti.com
>>
>> There are currently no real users of the memory-region that is split in
>> this series. The size of the memory-region in total stays the same.
>> The new layout is derived from the software running on the r5f
>> processor:
>> https://github.com/TexasInstruments/mcupsdk-core-k3/blob/k3_main/examples/drivers/ipc/ipc_rpmsg_echo_linux/am62ax-sk/r5fss0-0_freertos/ti-arm-clang/linker.cmd#L172
>> https://github.com/TexasInstruments/mcupsdk-core-k3/blob/k3_main/source/drivers/device_manager/sciclient.h#L459
>>
>> Additionally the two important devicetree nodes for resuming from IO+DDR
>> have the bootph-pre-ram flag added as this data needs to be read before
>> the RAM is in use.
>>
>> Best
>> Markus
>>
>> Signed-off-by: Markus Schneider-Pargmann (TI) <msp@baylibre.com>
>> ---
>> Changes in v3:
>> - Squash the enforcement of the memory-region-names requirement in the
>> patch adding the memory-region-names, as suggested.
>> - Link to v2: https://lore.kernel.org/r/20260312-topic-am62a-ioddr-dt-v6-19-v2-0-37cb7ceec658@baylibre.com
>>
>> Changes in v2:
>> - Make memory-region-names required if memory-region is present
>> - Fixup memory-region and memory-region-names conditions. Require either
>> 2 or 6 regions for memory-region and memory-region-names
>> - Reword and restructure the binding documentation for memory-region and
>> memory-region-names
>> - Add memory-region-names to all uses of memory-region
>> - Link to v1: https://lore.kernel.org/r/20260303-topic-am62a-ioddr-dt-v6-19-v1-0-12fe72bb40d2@baylibre.com
>>
>> ---
>> Markus Schneider-Pargmann (TI) (7):
>> dt-bindings: remoteproc: k3-r5f: Split up memory regions
>> dt-bindings: remoteproc: k3-r5f: Add memory-region-names
>> arm64: dts: ti: k3: Use memory-region-names for r5f
>> arm64: dts: ti: k3-am62a7-sk: Split r5f memory region
>> arm64: dts: ti: k3-am62p5-sk: Split r5f memory region
>> arm64: dts: ti: k3-am62a7-sk: Add r5f nodes to pre-ram bootphase
>> arm64: dts: ti: k3-am62p5-sk: Add r5f nodes to pre-ram bootphase
>
> TI folks, Please make sure these dts patches are picked up for 7.1.
> There's now a crap load of warnings in next with the binding change:
>
> 58 (ti,am62-r5fss): r5f@78000000: 'memory-region-names' is a
> required property
[...]
> If they aren't applied, making 'memory-region-names' required needs
> to be dropped from the binding.
>
This breaks DT backward compatibility. Why is memory-region-names now a
required item and cannot be assumed as "dma" and "firmware" as default?
Is that intentional (should have at least had a Fixes tag then if the
original definition was wrong)?
--
Regards
Vignesh
https://ti.com/opensource
^ permalink raw reply
* Re: [PATCH] dt-bindings: sram: Allow multiple-word prefixes to sram subnode
From: Konrad Dybcio @ 2026-04-09 9:58 UTC (permalink / raw)
To: Krzysztof Kozlowski, Konrad Dybcio
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree,
linux-kernel, Luca Weiss
In-Reply-To: <20260409-augmented-stalwart-crow-3fcd3a@quoll>
On 4/9/26 10:45 AM, Krzysztof Kozlowski wrote:
> On Wed, Apr 08, 2026 at 03:28:13PM +0200, Konrad Dybcio wrote:
>> From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
>>
>> Currently, foo-sram is allowed, but foo-bar-sram is not.
>>
>> Allow it so that more complex names aren't unnecessarily simplified.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
>> ---
>> Documentation/devicetree/bindings/sram/sram.yaml | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
>> index c451140962c8..b65c2ff846f1 100644
>> --- a/Documentation/devicetree/bindings/sram/sram.yaml
>> +++ b/Documentation/devicetree/bindings/sram/sram.yaml
>> @@ -65,7 +65,7 @@ properties:
>> type: boolean
>>
>> patternProperties:
>> - "^([a-z0-9]*-)?sram(-section)?@[a-f0-9]+$":
>> + "^([a-z0-9]*-|)+sram(-section)?@[a-f0-9]+$":
>
> '|)' is an odd syntax, not really intuitive. Why this cannot be:
> ([a-z0-9]+-)*
Might as well
> ?
> (replacing also * -> + inside)
Yeah good idea
Although, as a fun tangent, I just checked and DTC accepts node
names starting with a hyphen.. We should probably change that..
Konrad
^ permalink raw reply
* [PATCH v1 0/7] Add verdin imx8m[mp] and imx95 zinnia board
From: Francesco Dolcini @ 2026-04-09 9:58 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, Shawn Guo
Cc: Francesco Dolcini, devicetree, linux-kernel, imx,
linux-arm-kernel
From: Francesco Dolcini <francesco.dolcini@toradex.com>
Add Zinnia Carrier Board mated with Verdin iMX8M Plus, Verdin iMX8M Mini and
Verdin iMX95.
It features 1 x RS232, 1 x RS485, 1 x CAN, 3 x isolated digital I/O,
2 x 1GBit/s Ethernet, a mini PCIe slot with USB / SIM card connector
for a modem, USB and SD card interfaces.
Some small fixes and cleanup are done on the SOM dtsi file, in preparation
for the Zinnia addition.
Shawn, Frank: bindings/arm/fsl.yaml still list Shawn as maintainer, maybe
confirm that this is wanted.
Link: https://www.toradex.com/products/carrier-board/zinnia-carrier-board
Francesco Dolcini (7):
dt-bindings: arm: fsl: Add verdin imx8m[mp] and imx95 zinnia board
arm64: dts: freescale: imx8mm-verdin: Split UART_2 pinctrl group
arm64: dts: freescale: imx8mm-verdin: Add Zinnia
arm64: dts: freescale: imx8mp-verdin: Split UART_2 pinctrl group
arm64: dts: freescale: imx8mp-verdin: Add Zinnia
arm64: dts: freescale: imx95-verdin: Split UART_2 pinctrl group
arm64: dts: freescale: imx95-verdin: Add Zinnia
.../devicetree/bindings/arm/fsl.yaml | 6 +
arch/arm64/boot/dts/freescale/Makefile | 6 +
.../imx8mm-verdin-nonwifi-zinnia.dts | 21 +
.../freescale/imx8mm-verdin-wifi-zinnia.dts | 21 +
.../dts/freescale/imx8mm-verdin-zinnia.dtsi | 383 ++++++++++++++++
.../boot/dts/freescale/imx8mm-verdin.dtsi | 16 +-
.../imx8mp-verdin-nonwifi-zinnia.dts | 21 +
.../freescale/imx8mp-verdin-wifi-zinnia.dts | 21 +
.../dts/freescale/imx8mp-verdin-zinnia.dtsi | 422 +++++++++++++++++
.../boot/dts/freescale/imx8mp-verdin.dtsi | 14 +-
.../freescale/imx95-verdin-nonwifi-zinnia.dts | 21 +
.../freescale/imx95-verdin-wifi-zinnia.dts | 21 +
.../dts/freescale/imx95-verdin-zinnia.dtsi | 429 ++++++++++++++++++
.../boot/dts/freescale/imx95-verdin.dtsi | 18 +-
14 files changed, 1408 insertions(+), 12 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-zinnia.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-zinnia.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-verdin-zinnia.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-zinnia.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-zinnia.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-zinnia.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx95-verdin-nonwifi-zinnia.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx95-verdin-wifi-zinnia.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx95-verdin-zinnia.dtsi
--
2.47.3
^ permalink raw reply
* [PATCH v1 1/7] dt-bindings: arm: fsl: Add verdin imx8m[mp] and imx95 zinnia board
From: Francesco Dolcini @ 2026-04-09 9:58 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, Shawn Guo
Cc: Francesco Dolcini, devicetree, linux-kernel, imx,
linux-arm-kernel
In-Reply-To: <20260409095855.61252-1-francesco@dolcini.it>
From: Francesco Dolcini <francesco.dolcini@toradex.com>
Add Toradex Verdin Zinnia carrier board mated with Verdin
iMX8M Plus, Verdin iMX8M Mini and Verdin iMX95.
Link: https://www.toradex.com/products/carrier-board/zinnia-carrier-board
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 0023cd126807..f5429e6c86ff 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1025,6 +1025,7 @@ properties:
- toradex,verdin-imx8mm-nonwifi-ivy # Verdin iMX8M Mini Module on Ivy
- toradex,verdin-imx8mm-nonwifi-mallow # Verdin iMX8M Mini Module on Mallow
- toradex,verdin-imx8mm-nonwifi-yavia # Verdin iMX8M Mini Module on Yavia
+ - toradex,verdin-imx8mm-nonwifi-zinnia # Verdin iMX8M Mini Module on Zinnia
- const: toradex,verdin-imx8mm-nonwifi # Verdin iMX8M Mini Module without Wi-Fi / BT
- const: toradex,verdin-imx8mm # Verdin iMX8M Mini Module
- const: fsl,imx8mm
@@ -1037,6 +1038,7 @@ properties:
- toradex,verdin-imx8mm-wifi-ivy # Verdin iMX8M Mini Wi-Fi / BT Module on Ivy
- toradex,verdin-imx8mm-wifi-mallow # Verdin iMX8M Mini Wi-Fi / BT Module on Mallow
- toradex,verdin-imx8mm-wifi-yavia # Verdin iMX8M Mini Wi-Fi / BT Module on Yavia
+ - toradex,verdin-imx8mm-wifi-zinnia # Verdin iMX8M Mini Wi-Fi / BT Module on Zinnia
- const: toradex,verdin-imx8mm-wifi # Verdin iMX8M Mini Wi-Fi / BT Module
- const: toradex,verdin-imx8mm # Verdin iMX8M Mini Module
- const: fsl,imx8mm
@@ -1271,6 +1273,7 @@ properties:
- toradex,verdin-imx8mp-nonwifi-ivy # Verdin iMX8M Plus Module on Ivy
- toradex,verdin-imx8mp-nonwifi-mallow # Verdin iMX8M Plus Module on Mallow
- toradex,verdin-imx8mp-nonwifi-yavia # Verdin iMX8M Plus Module on Yavia
+ - toradex,verdin-imx8mp-nonwifi-zinnia # Verdin iMX8M Plus Module on Zinnia
- const: toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Module without Wi-Fi / BT
- const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module
- const: fsl,imx8mp
@@ -1283,6 +1286,7 @@ properties:
- toradex,verdin-imx8mp-wifi-ivy # Verdin iMX8M Plus Wi-Fi / BT Module on Ivy
- toradex,verdin-imx8mp-wifi-mallow # Verdin iMX8M Plus Wi-Fi / BT Module on Mallow
- toradex,verdin-imx8mp-wifi-yavia # Verdin iMX8M Plus Wi-Fi / BT Module on Yavia
+ - toradex,verdin-imx8mp-wifi-zinnia # Verdin iMX8M Plus Wi-Fi / BT Module on Zinnia
- const: toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Module
- const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module
- const: fsl,imx8mp
@@ -1515,6 +1519,7 @@ properties:
- toradex,verdin-imx95-nonwifi-ivy # Verdin iMX95 Module on Ivy
- toradex,verdin-imx95-nonwifi-mallow # Verdin iMX95 Module on Mallow
- toradex,verdin-imx95-nonwifi-yavia # Verdin iMX95 Module on Yavia
+ - toradex,verdin-imx95-nonwifi-zinnia # Verdin iMX95 Module on Zinnia
- const: toradex,verdin-imx95-nonwifi # Verdin iMX95 Module without Wi-Fi / BT
- const: toradex,verdin-imx95 # Verdin iMX95 Module
- const: fsl,imx95
@@ -1527,6 +1532,7 @@ properties:
- toradex,verdin-imx95-wifi-ivy # Verdin iMX95 Wi-Fi / BT Module on Ivy
- toradex,verdin-imx95-wifi-mallow # Verdin iMX95 Wi-Fi / BT Module on Mallow
- toradex,verdin-imx95-wifi-yavia # Verdin iMX95 Wi-Fi / BT Module on Yavia
+ - toradex,verdin-imx95-wifi-zinnia # Verdin iMX95 Wi-Fi / BT Module on Zinnia
- const: toradex,verdin-imx95-wifi # Verdin iMX95 Wi-Fi / BT Module
- const: toradex,verdin-imx95 # Verdin iMX95 Module
- const: fsl,imx95
--
2.47.3
^ permalink raw reply related
* [PATCH v1 2/7] arm64: dts: freescale: imx8mm-verdin: Split UART_2 pinctrl group
From: Francesco Dolcini @ 2026-04-09 9:58 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, Shawn Guo
Cc: Francesco Dolcini, devicetree, linux-kernel, imx,
linux-arm-kernel
In-Reply-To: <20260409095855.61252-1-francesco@dolcini.it>
From: Francesco Dolcini <francesco.dolcini@toradex.com>
Some carrier board reuse the UART_2 control signals as GPIO, split
the pinctrl RTS/CTS in separated nodes to maximize flexibility.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 1594ce9182a5..5fc177f589cb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -735,7 +735,7 @@ &uart2 {
/* Verdin UART_2 */
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
+ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_cts>, <&pinctrl_uart3_rts>;
uart-has-rtscts;
};
@@ -1144,12 +1144,20 @@ pinctrl_uart2: uart2grp {
<MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x146>; /* SODIMM 129 */
};
+ pinctrl_uart3_cts: uart3ctsgrp {
+ fsl,pins =
+ <MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x146>; /* SODIMM 143 */
+ };
+
+ pinctrl_uart3_rts: uart3rtsgrp {
+ fsl,pins =
+ <MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x146>; /* SODIMM 141 */
+ };
+
pinctrl_uart3: uart3grp {
fsl,pins =
- <MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x146>, /* SODIMM 141 */
<MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x146>, /* SODIMM 139 */
- <MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x146>, /* SODIMM 137 */
- <MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x146>; /* SODIMM 143 */
+ <MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x146>; /* SODIMM 137 */
};
pinctrl_uart4: uart4grp {
--
2.47.3
^ permalink raw reply related
* [PATCH v1 3/7] arm64: dts: freescale: imx8mm-verdin: Add Zinnia
From: Francesco Dolcini @ 2026-04-09 9:58 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, Shawn Guo
Cc: Francesco Dolcini, devicetree, linux-kernel, imx,
linux-arm-kernel
In-Reply-To: <20260409095855.61252-1-francesco@dolcini.it>
From: Francesco Dolcini <francesco.dolcini@toradex.com>
Add Zinnia Carrier Board mated with Verdin iMX8M Mini.
It features 1 x RS232, 1 x RS485, 1 x CAN, 3 x isolated digital I/O,
1 x GBit/s Ethernet, a mini PCIe slot with USB / SIM card connector
for a modem, USB and SD card interfaces.
Link: https://www.toradex.com/products/carrier-board/zinnia-carrier-board
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
arch/arm64/boot/dts/freescale/Makefile | 2 +
.../imx8mm-verdin-nonwifi-zinnia.dts | 21 +
.../freescale/imx8mm-verdin-wifi-zinnia.dts | 21 +
.../dts/freescale/imx8mm-verdin-zinnia.dtsi | 383 ++++++++++++++++++
4 files changed, 427 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-zinnia.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-zinnia.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-verdin-zinnia.dtsi
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 711e36cc2c99..072df4128716 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -177,11 +177,13 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-ivy.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-mallow.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-yavia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-zinnia.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-ivy.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-mallow.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-yavia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-zinnia.dtb
imx8mm-tqma8mqml-mba8mx-lvds-g133han01-dtbs += imx8mm-tqma8mqml-mba8mx.dtb imx8mm-tqma8mqml-mba8mx-lvds-g133han01.dtbo
imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33-dtbs += imx8mm-tqma8mqml-mba8mx.dtb imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-zinnia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-zinnia.dts
new file mode 100644
index 000000000000..07b4daf916c2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-zinnia.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano
+ * https://www.toradex.com/products/carrier-board/zinnia-carrier-board
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-nonwifi.dtsi"
+#include "imx8mm-verdin-zinnia.dtsi"
+
+/ {
+ model = "Toradex Verdin iMX8M Mini on Zinnia";
+ compatible = "toradex,verdin-imx8mm-nonwifi-zinnia",
+ "toradex,verdin-imx8mm-nonwifi",
+ "toradex,verdin-imx8mm",
+ "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-zinnia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-zinnia.dts
new file mode 100644
index 000000000000..01a254dc1e6c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-zinnia.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano
+ * https://www.toradex.com/products/carrier-board/zinnia-carrier-board
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-wifi.dtsi"
+#include "imx8mm-verdin-zinnia.dtsi"
+
+/ {
+ model = "Toradex Verdin iMX8M Mini WB on Zinnia";
+ compatible = "toradex,verdin-imx8mm-wifi-zinnia",
+ "toradex,verdin-imx8mm-wifi",
+ "toradex,verdin-imx8mm",
+ "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-zinnia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-zinnia.dtsi
new file mode 100644
index 000000000000..686486e03178
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-zinnia.dtsi
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * Common dtsi for Verdin IMX8MM SoM on Zinnia carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano
+ * https://www.toradex.com/products/carrier-board/zinnia-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_zinnia_leds>;
+
+ /* LED1 Red - SODIMM 48 - LED1_R */
+ led-0 {
+ color = <LED_COLOR_ID_RED>;
+ default-state = "off";
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <1>;
+ gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* LED1 Blue - SODIMM 46 - LED1_B */
+ led-1 {
+ color = <LED_COLOR_ID_BLUE>;
+ default-state = "off";
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <1>;
+ gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* LED3 Red - SODIMM 44 - LED3_R */
+ led-2 {
+ color = <LED_COLOR_ID_RED>;
+ default-state = "off";
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <3>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* LED3 Green - SODIMM 54 - LED3_G */
+ led-3 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <3>;
+ gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* LED3 Blue - SODIMM 36 - LED3_B */
+ led-4 {
+ color = <LED_COLOR_ID_BLUE>;
+ default-state = "off";
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <3>;
+ gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* LED4 Red - SODIMM 34 - LED4_R */
+ led-5 {
+ color = <LED_COLOR_ID_RED>;
+ default-state = "off";
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <4>;
+ gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* LED4 Green - SODIMM 32 - LED4_G */
+ led-6 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <4>;
+ gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* LED4 Blue - SODIMM 30 - LED4_B */
+ led-7 {
+ color = <LED_COLOR_ID_BLUE>;
+ default-state = "off";
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <4>;
+ gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ zinnia-1v8-voltage {
+ compatible = "voltage-divider";
+ full-ohms = <39000>; /* 12k + 27k */
+ /* Verdin ADC_4 */
+ io-channels = <&verdin_som_adc 4>;
+ output-ohms = <27000>;
+ };
+
+ zinnia-3v3-voltage {
+ compatible = "voltage-divider";
+ full-ohms = <54000>; /* 27k + 27k */
+ /* Verdin ADC_3 */
+ io-channels = <&verdin_som_adc 5>;
+ output-ohms = <27000>;
+ };
+
+ zinnia-5v-voltage {
+ compatible = "voltage-divider";
+ full-ohms = <39000>; /* 27k + 12k */
+ /* Verdin ADC_2 */
+ io-channels = <&verdin_som_adc 6>;
+ output-ohms = <12000>;
+ };
+
+ /* Zinnia Power Supply Input Voltage */
+ zinnia-input-voltage {
+ compatible = "voltage-divider";
+ full-ohms = <204700>; /* 200k + 4.7k */
+ /* Verdin ADC_1 */
+ io-channels = <&verdin_som_adc 7>;
+ output-ohms = <4700>;
+ };
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+ pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_uart3_cts_gpio>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, <&gpio5 13 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+
+ tpm@1 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ reg = <1>;
+ spi-max-frequency = <18500000>;
+ };
+};
+
+/* EEPROM on Zinnia */
+&eeprom_carrier_board {
+ status = "okay";
+};
+
+/* Verdin ETH_1 */
+&fec1 {
+ status = "okay";
+};
+
+&gpio1 {
+ gpio-line-names =
+ "DI2_RB", /* SODIMM 216 */ /* 0 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "DO3_EN", /* SODIMM 220 */
+ "DI3_EN", /* SODIMM 222 */
+ "", /* 10 */
+ "DI2_EN", /* SODIMM 218 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 20 */
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "", /* 0 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 10 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ ""; /* 20 */
+};
+
+&gpio3 {
+ gpio-line-names =
+ "", /* 0 */
+ "",
+ "",
+ "",
+ "DO1_EN", /* SODIMM 206 */
+ "",
+ "DI3_RB", /* SODIMM 56 */
+ "",
+ "",
+ "",
+ "", /* 10 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 20 */
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
+&gpio4 {
+ gpio-line-names =
+ "", /* 0 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 10 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 20 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
+&gpio5 {
+ gpio-line-names =
+ "", /* 0 */
+ "",
+ "",
+ "",
+ "",
+ "DI1_EN", /* SODIMM 208 */
+ "",
+ "",
+ "",
+ "",
+ "", /* 10 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 20 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "DI1_RB", /* SODIMM 210 */
+ "DO2_EN", /* SODIMM 212 */
+ "",
+ "";
+};
+
+/* Temperature sensor on Zinnia */
+&hwmon_temp {
+ compatible = "ti,tmp1075";
+
+ status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+ status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+ status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart2 {
+ status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_rts>;
+ rs485-rx-during-tx;
+ linux,rs485-enabled-at-boot-time;
+
+ status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+ status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+ status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio1>,
+ <&pinctrl_gpio2>,
+ <&pinctrl_gpio3>,
+ <&pinctrl_gpio4>,
+ <&pinctrl_gpio5>,
+ <&pinctrl_gpio6>,
+ <&pinctrl_gpio7>,
+ <&pinctrl_gpio8>,
+ <&pinctrl_qspi1_io0_gpio>;
+
+ pinctrl_qspi1_io0_gpio: gpio3io6grp {
+ fsl,pins = <MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6 0x184>; /* SODIMM 56 */
+ };
+
+ pinctrl_uart3_cts_gpio: gpio5io9grp {
+ fsl,pins = <MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x184>; /* SODIMM 143 */
+ };
+
+ pinctrl_zinnia_leds: zinnialedsgrp {
+ fsl,pins =
+ <MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x16>, /* SODIMM 30 */
+ <MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x16>, /* SODIMM 32 */
+ <MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x16>, /* SODIMM 34 */
+ <MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x16>, /* SODIMM 36 */
+ <MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x16>, /* SODIMM 44 */
+ <MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x16>, /* SODIMM 46 */
+ <MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x16>, /* SODIMM 48 */
+ <MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x16>; /* SODIMM 54 */
+ };
+};
--
2.47.3
^ permalink raw reply related
* [PATCH v1 4/7] arm64: dts: freescale: imx8mp-verdin: Split UART_2 pinctrl group
From: Francesco Dolcini @ 2026-04-09 9:58 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, Shawn Guo
Cc: Francesco Dolcini, devicetree, linux-kernel, imx,
linux-arm-kernel
In-Reply-To: <20260409095855.61252-1-francesco@dolcini.it>
From: Francesco Dolcini <francesco.dolcini@toradex.com>
Some carrier board reuse the UART_2 control signals as GPIO, split
the pinctrl RTS/CTS in separated nodes to maximize flexibility.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index d31f8082394f..9fee2cf9ef54 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -846,7 +846,7 @@ &uart1 {
/* Verdin UART_2 */
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
+ pinctrl-0 = <&pinctrl_uart2>, <&pinctrl_uart2_cts>, <&pinctrl_uart2_rts>;
uart-has-rtscts;
};
@@ -1277,10 +1277,18 @@ pinctrl_uart1: uart1grp {
<MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x1c4>; /* SODIMM 131 */
};
+ pinctrl_uart2_cts: uart2ctsgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS 0x1c4>; /* SODIMM 143 */
+ };
+
+ pinctrl_uart2_rts: uart2rtsgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x1c4>; /* SODIMM 141 */
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins =
- <MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS 0x1c4>, /* SODIMM 143 */
- <MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x1c4>, /* SODIMM 141 */
<MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x1c4>, /* SODIMM 137 */
<MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x1c4>; /* SODIMM 139 */
};
--
2.47.3
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox