* Re: [PATCH] dt-bindings: arm: qcom,ids: Add SoC ID for Snapdragon SDA 850
From: Konrad Dybcio @ 2026-06-24 11:53 UTC (permalink / raw)
To: Krzysztof Kozlowski, David Heidelberg, Bjorn Andersson,
Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel
In-Reply-To: <80049d2e-ddc9-44e9-b231-876adcd79823@kernel.org>
On 6/24/26 1:50 PM, Krzysztof Kozlowski wrote:
> On 24/06/2026 13:37, David Heidelberg wrote:
>> best I do is close-to-mainline tree,
>>
>> https://github.com/commaai/vamOS/tree/master/kernel/dts
>
>
> That's not upstream, so we do not need this patch upstream... Just keep
> it out of tree.
As I mentioned, the proposed ID has upstream users e.g.
sdm850-lenovo-yoga-c630.dts
Konrad
^ permalink raw reply
* Re: [PATCH v6 9/9] arm64: dts: freescale: imx95: Add video codec node
From: Francesco Dolcini @ 2026-06-24 11:50 UTC (permalink / raw)
To: Nas Chung
Cc: mchehab, hverkuil, robh, krzk+dt, conor+dt, shawnguo, s.hauer,
linux-media, devicetree, linux-kernel, linux-imx,
linux-arm-kernel, jackson.lee, lafley.kim, marek.vasut
In-Reply-To: <20260624072043.238-10-nas.chung@chipsnmedia.com>
On Wed, Jun 24, 2026 at 04:20:43PM +0900, Nas Chung wrote:
> Add the Chips and Media wave633 video codec node on IMX95 SoCs.
>
> Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
> ---
> .../boot/dts/freescale/imx95-19x19-evk.dts | 11 ++++++
> arch/arm64/boot/dts/freescale/imx95.dtsi | 36 +++++++++++++++++++
> 2 files changed, 47 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> index 041fd838fabb..7edd1c69966a 100644
> --- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> @@ -76,6 +76,11 @@ linux_cma: linux,cma {
> linux,cma-default;
> reusable;
> };
> +
> + vpu_boot: memory@a0000000 {
> + reg = <0 0xa0000000 0 0x100000>;
> + no-map;
> + };
> };
>
> flexcan1_phy: can-phy0 {
> @@ -1142,3 +1147,9 @@ &tpm6 {
> pinctrl-0 = <&pinctrl_tpm6>;
> status = "okay";
> };
> +
> +&vpu {
> + memory-region = <&vpu_boot>;
> + sram = <&sram1>;
Can the `sram` node moved to imx95.dtsi or not?
Francesco
^ permalink raw reply
* Re: [PATCH 3/7] dt-bindings: net: rockchip-dwmac: Allow 9 clocks
From: Heiko Stübner @ 2026-06-24 11:50 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Andrew Lunn,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
David Wu, Maxime Coquelin, Alexandre Torgue, Yanan He
Cc: devicetree, linux-kernel, linux-arm-kernel, linux-rockchip,
netdev, linux-stm32, Yanan He
In-Reply-To: <20260624-rv1126-alientek-dlrv1126-v1-3-5aef608a3f64@gmail.com>
Am Mittwoch, 24. Juni 2026, 10:44:40 Mitteleuropäische Sommerzeit schrieb Yanan He:
> RV1126 has a separate GMAC Ethernet output clock used as the external
> PHY reference clock. This clock is described in addition to the existing
> GMAC clocks.
AS stated in the driver patch, this is the input clock for the phy
and ethernet phys are perfectly capable of handling their input
clocks. See reference in the driver patch.
Heiko
> Signed-off-by: Yanan He <grumpycat921013@gmail.com>
> ---
> Documentation/devicetree/bindings/net/rockchip-dwmac.yaml | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
> index 80c252845349..86a7e83675ae 100644
> --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
> @@ -71,7 +71,7 @@ properties:
>
> clocks:
> minItems: 4
> - maxItems: 8
> + maxItems: 9
>
> clock-names:
> contains:
>
>
^ permalink raw reply
* Re: [PATCH] dt-bindings: arm: qcom,ids: Add SoC ID for Snapdragon SDA 850
From: Krzysztof Kozlowski @ 2026-06-24 11:50 UTC (permalink / raw)
To: David Heidelberg, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel
In-Reply-To: <16d91c51-9f1b-48ff-90db-7dd7ef056bc2@ixit.cz>
On 24/06/2026 13:37, David Heidelberg wrote:
> best I do is close-to-mainline tree,
>
> https://github.com/commaai/vamOS/tree/master/kernel/dts
That's not upstream, so we do not need this patch upstream... Just keep
it out of tree.
Best regards,
Krzysztof
^ permalink raw reply
* Re: [PATCH 4/7] net: stmmac: dwmac-rk: Enable refout clock for RGMII
From: Heiko Stübner @ 2026-06-24 11:49 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Andrew Lunn,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
David Wu, Maxime Coquelin, Alexandre Torgue, Yanan He
Cc: devicetree, linux-kernel, linux-arm-kernel, linux-rockchip,
netdev, linux-stm32, Yanan He
In-Reply-To: <20260624-rv1126-alientek-dlrv1126-v1-4-5aef608a3f64@gmail.com>
Hi,
Am Mittwoch, 24. Juni 2026, 10:44:41 Mitteleuropäische Sommerzeit schrieb Yanan He:
> Some Rockchip GMAC integrations use clk_mac_refout as an external PHY
> reference clock even when the MAC is configured for RGMII.
>
> RV1126 boards can route CLK_GMAC_ETHERNET_OUT to the external PHY as a
> 25 MHz reference clock. If the driver does not acquire and enable this
> clock in RGMII mode, the common clock framework may disable it as unused
> and the PHY can lose its reference clock.
>
> Enable the refout clock handling for RGMII in addition to RMII.
the clock your referencing is not limited to your rv1126 but instead
present on most (all?) Rockchip SoCs.
And it is an input clock for the phy itself, so should be handled there.
See for example
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi#n313
as a reference.
Heiko
> Signed-off-by: Yanan He <grumpycat921013@gmail.com>
> ---
> drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> index 8d7042e68926..f6fdc0c5b475 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> @@ -1112,7 +1112,8 @@ static int rk_gmac_clk_init(struct plat_stmmacenet_data *plat)
> bsp_priv->clk_enabled = false;
>
> bsp_priv->num_clks = ARRAY_SIZE(rk_clocks);
> - if (phy_iface == PHY_INTERFACE_MODE_RMII)
> + if (phy_iface == PHY_INTERFACE_MODE_RMII ||
> + phy_iface == PHY_INTERFACE_MODE_RGMII)
> bsp_priv->num_clks += ARRAY_SIZE(rk_rmii_clocks);
>
> bsp_priv->clks = devm_kcalloc(dev, bsp_priv->num_clks,
> @@ -1123,7 +1124,8 @@ static int rk_gmac_clk_init(struct plat_stmmacenet_data *plat)
> for (i = 0; i < ARRAY_SIZE(rk_clocks); i++)
> bsp_priv->clks[i].id = rk_clocks[i];
>
> - if (phy_iface == PHY_INTERFACE_MODE_RMII) {
> + if (phy_iface == PHY_INTERFACE_MODE_RMII ||
> + phy_iface == PHY_INTERFACE_MODE_RGMII) {
> for (j = 0; j < ARRAY_SIZE(rk_rmii_clocks); j++)
> bsp_priv->clks[i++].id = rk_rmii_clocks[j];
> }
>
>
^ permalink raw reply
* Re: [PATCH v4 5/5] clk: rockchip: rk3588: add GATE_GRF clocks for I2S MCLK output to IO
From: Heiko Stübner @ 2026-06-24 11:45 UTC (permalink / raw)
To: Daniele Briguglio, Diederik de Haas, Michael Turquette,
Stephen Boyd, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Diederik de Haas
Cc: Nicolas Frattaroli, linux-clk, devicetree, linux-arm-kernel,
linux-rockchip, linux-kernel, Ricardo Pardini
In-Reply-To: <DJGM4D19H31O.4I5N79CG5Z8C@cknow-tech.com>
Am Dienstag, 23. Juni 2026, 19:42:05 Mitteleuropäische Sommerzeit schrieb Diederik de Haas:
> Hi,
>
> On Tue Jun 23, 2026 at 4:10 PM CEST, Daniele Briguglio wrote:
> >> So IIUC that means I'd be testing both variants.
> >
> > Right, that covers both: the mux path and the consumer path. Looking
> > forward to the results.
>
> Analog audio works on both. Plus with _TO_IO and LTS without in their
> respective DTS's. So I guess CLK_IGNORE_UNUSED works.
> Whether it's a good/right fix, I'll leave up to others.
It is the correct fix, as it returns the original way things worked for
boards not activly handling that clock.
So while boards should do that, this makes the clock-addition
backwards compatible.
Care to send a patch for that change? :-)
Heiko
^ permalink raw reply
* [PATCH] arm64: dts: mediatek: mt8395-radxa-nio-12l: Enable I2C3 on 40-pin header
From: Ricardo Pardini via B4 Relay @ 2026-06-24 11:41 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno
Cc: devicetree, linux-kernel, linux-arm-kernel, linux-mediatek,
Ricardo Pardini
From: Ricardo Pardini <ricardo@pardini.net>
I2C3 (SDA3/SCL3 on GPIO14/GPIO15) is routed to the 40-pin GPIO header,
exposed on the blue-colored pins 27 (SCL3) and 28 (SDA3). Enable the
controller, add the corresponding pin configuration in the pinctrl node
so users can use external I2C devices.
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
---
The Radxa NIO 12L exposes I2C3 (SDA3/SCL3, GPIO14/GPIO15) on its 40-pin
GPIO header, on the blue-coloured pins 27 (SCL3) and 28 (SDA3).
Enable the I2C3 controller, add the matching pinctrl configuration and run
the bus at 400 kHz, matching the other I2C buses already enabled on this
board.
Tested using a SD1306 I2C OLED display.
---
arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
index bf91305e8e4a5..03a2f2e746475 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
@@ -371,6 +371,14 @@ it5205_sbu_mux: endpoint {
};
};
+/* Exposed on 40-pin header (blue-colored pins 27:SCL3 28:SDA3) */
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&i2c4 {
clock-frequency = <400000>;
pinctrl-0 = <&i2c4_pins>;
@@ -789,6 +797,16 @@ pins-bus {
};
};
+ i2c3_pins: i2c3-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO14__FUNC_SDA3>,
+ <PINMUX_GPIO15__FUNC_SCL3>;
+ bias-pull-up = <1000>;
+ drive-strength = <6>;
+ drive-strength-microamp = <1000>;
+ };
+ };
+
i2c4_pins: i2c4-pins {
pins-bus {
pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
---
base-commit: 8cd9520d35a6c38db6567e97dd93b1f11f185dc6
change-id: 20260624-nio-12l-add-i2c-40-pin-19e0482fd835
Best regards,
--
Ricardo Pardini <ricardo@pardini.net>
^ permalink raw reply related
* Re: [PATCH v11] PCI: Add support for PCIe WAKE# interrupt
From: sashiko-bot @ 2026-06-24 11:40 UTC (permalink / raw)
To: Krishna Chaitanya Chundru; +Cc: linux-pci, devicetree, robh, conor+dt
In-Reply-To: <20260624-wakeirq_support-v11-1-120fbfaebe59@oss.qualcomm.com>
Thank you for your contribution! Sashiko AI review found 6 potential issue(s) to consider:
- [High] Hot-removing an endpoint sharing a WAKE# GPIO breaks wakeup for all remaining endpoints on that line.
- [High] pci_remove_of_wake_gpio() unconditionally clears the device's wakeup configuration and wake IRQ, even if it never acquired the WAKE# GPIO.
- [High] WAKE# GPIO configuration forces device wakeup to be enabled by default, violating PCI PM policy.
- [Medium] Calling platform_pci_configure_wake() after device_add() creates a race condition that overwrites driver or userspace wakeup configuration.
- [Medium] Hardcoded IRQ_TYPE_LEVEL_LOW ignores Device Tree GPIO polarity for the WAKE# interrupt.
- [Medium] WAKE# GPIO configuration permanently fails if the GPIO provider returns -EPROBE_DEFER.
--
commit 9e1cd6307066585f1f51b9e7de95ae7950936ba0
Author: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
PCI: Add support for PCIe WAKE# interrupt
According to the PCI Express specification (PCIe r7.0, Section 5.3.3.2),
two link wakeup mechanisms are defined: Beacon and WAKE#. This change adds
support for the WAKE# mechanism in the PCI core.
Link: https://lore.kernel.org/all/20250515090517.3506772-1-krishna.chundru@oss.qualcomm.com/
Link: https://github.com/devicetree-org/dt-schema/pull/170
> diff --git a/drivers/pci/of.c b/drivers/pci/of.c
> index 8b18c4ba845cf..0f5effe1d7026 100644
> --- a/drivers/pci/of.c
> +++ b/drivers/pci/of.c
[ ... ]
> + ret = dev_pm_set_dedicated_wake_irq(&pdev->dev, wake_irq);
> + if (ret < 0) {
> + pci_err(pdev, "Failed to set WAKE# IRQ: %d\n", ret);
> + return;
> + }
> +
> + ret = irq_set_irq_type(wake_irq, IRQ_TYPE_LEVEL_LOW);
[Severity: Medium]
Does hardcoding IRQ_TYPE_LEVEL_LOW here override the logical polarity
specified in the Device Tree?
If the WAKE# GPIO is specified via the wake-gpios property with flags like
GPIO_ACTIVE_HIGH, this explicit type setting might ignore those flags and
fail to trigger on platforms with an inverted physical signal.
> + if (ret < 0) {
> + dev_pm_clear_wake_irq(&pdev->dev);
> + pci_err(pdev, "Failed to set irq_type: %d\n", ret);
> + return;
> + }
> +
> + device_init_wakeup(&pdev->dev, true);
[Severity: High]
Could this forcefully enable wakeup by default and violate standard PCI PM
policy?
Calling device_init_wakeup() with true marks the device as wakeup capable
and also sets dev->power.should_wakeup = true. The standard PCI core
behavior usually marks devices as wakeup capable but leaves enablement to
userspace opt-in.
> +}
> +
> +void pci_configure_of_wake_gpio(struct pci_dev *dev)
> +{
> + struct device_node *dn = pci_device_to_OF_node(dev);
> + struct gpio_desc *gpio;
> +
> + if (!dn)
> + return;
> + /*
> + * fwnode_gpiod_get() may fail with -EBUSY (e.g. shared WAKE#), but the
> + * actual WAKE# trigger from the device would still work and the host
> + * controller driver will enable power to the topology.
> + *
> + * -EPROBE_DEFER cannot be propagated here since pci_device_add() has no
> + * retry mechanism.
> + */
> + gpio = fwnode_gpiod_get(of_fwnode_handle(dn), "wake", GPIOD_IN, NULL);
> + if (!IS_ERR(gpio)) {
[Severity: Medium]
Since pci_device_add() has no retry mechanism, does swallowing -EPROBE_DEFER
here mean WAKE# functionality will permanently fail if the GPIO controller
providing the WAKE# line hasn't probed yet?
[Severity: High]
If multiple endpoints share a WAKE# GPIO, only the first device acquires
it while the rest fail with -EBUSY. Can this break wakeup capabilities
for all remaining endpoints if the first device is later hot-removed?
When the first device is removed, it frees the shared GPIO via
pci_remove_of_wake_gpio(), leaving the remaining active endpoints without
an associated wake IRQ.
> + dev->wake = gpio;
> + pci_configure_wake_irq(dev, gpio);
> + }
> +}
> +
> +void pci_remove_of_wake_gpio(struct pci_dev *dev)
> +{
> + struct device_node *dn = pci_device_to_OF_node(dev);
> +
> + if (!dn)
> + return;
> +
> + device_init_wakeup(&dev->dev, false);
> + dev_pm_clear_wake_irq(&dev->dev);
> + gpiod_put(dev->wake);
> + dev->wake = NULL;
> +}
[Severity: High]
Should this cleanup block be guarded by a check for dev->wake?
As it stands, if a PCI device with an OF node failed to acquire the GPIO
(e.g., it returned -EBUSY) or didn't have a wake property, this will still
unconditionally clear its PME wakeup capability and detach any dedicated
wake IRQ the driver might have configured itself.
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index b63cd0c310bc0..143b0bd35b3c9 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
[ ... ]
> @@ -2775,6 +2775,8 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
> /* Establish pdev->tsm for newly added (e.g. new SR-IOV VFs) */
> pci_tsm_init(dev);
>
> + platform_pci_configure_wake(dev);
[Severity: Medium]
Does calling platform_pci_configure_wake() after device_add() create a race
condition?
By the time this is called, the device is already visible in sysfs and
uevents have fired. Local userspace tools configuring power/wakeup or
asynchronous driver probes could have their configurations silently
overwritten by the subsequent device_init_wakeup() call.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260624-wakeirq_support-v11-1-120fbfaebe59@oss.qualcomm.com?part=1
^ permalink raw reply
* [PATCH 4/4] media: dt-bindings: rc: Sync keymap list with latest list
From: Sean Young @ 2026-06-24 11:39 UTC (permalink / raw)
To: linux-media, Mauro Carvalho Chehab, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Sean Young
Cc: devicetree, linux-kernel
In-Reply-To: <cover.1782300922.git.sean@mess.org>
The list is out of sync, so add missing entries, remove obsolete
entries and sort.
Signed-off-by: Sean Young <sean@mess.org>
---
Documentation/devicetree/bindings/media/rc.yaml | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml
index dedc5a4b81ec..43d84296e70d 100644
--- a/Documentation/devicetree/bindings/media/rc.yaml
+++ b/Documentation/devicetree/bindings/media/rc.yaml
@@ -122,10 +122,10 @@ properties:
- rc-proteus-2309
- rc-purpletv
- rc-pv951
- - rc-rc5-tv
- rc-rc6-mce
- rc-real-audio-220-32-keys
- rc-reddo
+ - rc-siemens-gigaset-rc20
- rc-snapstream-firefly
- rc-streamzap
- rc-su3000
@@ -147,11 +147,11 @@ properties:
- rc-tt-1500
- rc-twinhan-dtv-cab-ci
- rc-twinhan1027
+ - rc-vega-s9x
- rc-videomate-k100
- rc-videomate-s350
- rc-videomate-tv-pvr
- rc-videostrong-kii-pro
- - rc-vega-s9x
- rc-wetek-hub
- rc-wetek-play2
- rc-winfast
--
2.54.0
^ permalink raw reply related
* Re: [PATCH] dt-bindings: arm: qcom,ids: Add SoC ID for Snapdragon SDA 850
From: David Heidelberg @ 2026-06-24 11:37 UTC (permalink / raw)
To: Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel
In-Reply-To: <6ddd0652-d18e-4e23-a230-5f5c8a9756f8@kernel.org>
best I do is close-to-mainline tree,
https://github.com/commaai/vamOS/tree/master/kernel/dts
David
On 24/06/2026 08:26, Krzysztof Kozlowski wrote:
> On 23/06/2026 20:41, David Heidelberg via B4 Relay wrote:
>> From: David Heidelberg <david@ixit.cz>
>>
>> Add SoC ID for Qualcomm Snapdragon SDA850.
>>
>> Signed-off-by: David Heidelberg <david@ixit.cz>
>> ---
>> Will be used by Comma three.
>
> Can you provide a link?
>
> In general this must be send with the user.
>
>
> Best regards,
> Krzysztof
--
David Heidelberg
^ permalink raw reply
* [PATCH v9 06/12] clk: realtek: Add support for phase locked loops (PLLs)
From: Yu-Chun Lin @ 2026-06-24 11:29 UTC (permalink / raw)
To: mturquette, sboyd, robh, krzk+dt, conor+dt, p.zabel, cylee12,
afaerber, jyanchou, bmasney
Cc: devicetree, linux-clk, linux-kernel, linux-arm-kernel,
linux-realtek-soc, james.tai, cy.huang, stanley_chang,
eleanor.lin
In-Reply-To: <20260624112940.3475605-1-eleanor.lin@realtek.com>
From: Cheng-Yu Lee <cylee12@realtek.com>
Provide a full set of PLL operations for programmable PLLs and a read-only
variant for fixed or hardware-managed PLLs.
Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
---
Changes in v9:
- Add 'ftbl_find_ceil_by_rate()' as a fallback in 'clk_pll_determine_rate()' to
properly handle 'min_rate' and 'max_rate' boundaries when the floor result falls
below 'min_rate'.
---
drivers/clk/realtek/Makefile | 2 +
drivers/clk/realtek/clk-pll.c | 217 +++++++++++++++++++++++++++++++
drivers/clk/realtek/clk-pll.h | 47 +++++++
drivers/clk/realtek/freq_table.c | 57 ++++++++
drivers/clk/realtek/freq_table.h | 18 +++
5 files changed, 341 insertions(+)
create mode 100644 drivers/clk/realtek/clk-pll.c
create mode 100644 drivers/clk/realtek/clk-pll.h
create mode 100644 drivers/clk/realtek/freq_table.c
create mode 100644 drivers/clk/realtek/freq_table.h
diff --git a/drivers/clk/realtek/Makefile b/drivers/clk/realtek/Makefile
index 13000ed4ba11..71edc18121c6 100644
--- a/drivers/clk/realtek/Makefile
+++ b/drivers/clk/realtek/Makefile
@@ -2,3 +2,5 @@
obj-$(CONFIG_RTK_CLK_COMMON) += clk-rtk.o
clk-rtk-y += clk-rtk-common.o
+clk-rtk-y += clk-pll.o
+clk-rtk-y += freq_table.o
diff --git a/drivers/clk/realtek/clk-pll.c b/drivers/clk/realtek/clk-pll.c
new file mode 100644
index 000000000000..54c284070e47
--- /dev/null
+++ b/drivers/clk/realtek/clk-pll.c
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2024-2026 Realtek Semiconductor Corporation
+ * Author: Cheng-Yu Lee <cylee12@realtek.com>
+ */
+
+#include <linux/export.h>
+#include <linux/regmap.h>
+#include <linux/spinlock.h>
+#include "clk-pll.h"
+
+#define TIMEOUT 500
+
+static inline struct clk_pll *to_clk_pll(struct clk_hw *hw)
+{
+ struct clk_regmap *clkr = to_clk_regmap(hw);
+
+ return container_of(clkr, struct clk_pll, clkr);
+}
+
+static int wait_freq_ready(struct clk_pll *clkp)
+{
+ u32 pollval;
+
+ /* reg == 0 means not configured.
+ * Register offset 0 is never a valid address on Realtek SoCs.
+ */
+ if (!clkp->freq_ready_reg)
+ return 0;
+
+ return regmap_read_poll_timeout_atomic(clkp->clkr.regmap, clkp->freq_ready_reg, pollval,
+ (pollval & clkp->freq_ready_mask) == clkp->freq_ready_val, 1, TIMEOUT);
+}
+
+static bool is_power_on(struct clk_pll *clkp)
+{
+ u32 val;
+
+ /* reg == 0 means not configured (assume always on).
+ * Register offset 0 is never a valid address on Realtek SoCs.
+ */
+ if (!clkp->power_reg)
+ return true;
+
+ if (regmap_read(clkp->clkr.regmap, clkp->power_reg, &val))
+ return false;
+
+ return (val & clkp->power_mask) == clkp->power_val_on;
+}
+
+static void clk_pll_disable(struct clk_hw *hw)
+{
+ struct clk_pll *clkp = to_clk_pll(hw);
+ unsigned long flags;
+
+ if (!clkp->seq_power_off)
+ return;
+
+ spin_lock_irqsave(&clkp->lock, flags);
+
+ regmap_multi_reg_write(clkp->clkr.regmap, clkp->seq_power_off,
+ clkp->num_seq_power_off);
+
+ spin_unlock_irqrestore(&clkp->lock, flags);
+}
+
+static int clk_pll_is_enabled(struct clk_hw *hw)
+{
+ struct clk_pll *clkp = to_clk_pll(hw);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&clkp->lock, flags);
+
+ ret = is_power_on(clkp);
+
+ spin_unlock_irqrestore(&clkp->lock, flags);
+
+ return ret;
+}
+
+static int clk_pll_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct clk_pll *clkp = to_clk_pll(hw);
+ const struct freq_table *ftblv = NULL;
+
+ ftblv = ftbl_find_by_rate(clkp->freq_tbl, req->rate);
+
+ if (ftblv && ftblv->rate >= req->min_rate) {
+ req->rate = ftblv->rate;
+ return 0;
+ }
+
+ /* floor result is below min_rate; find the smallest rate >= min_rate */
+ ftblv = ftbl_find_ceil_by_rate(clkp->freq_tbl, req->min_rate);
+ if (!ftblv || ftblv->rate > req->max_rate)
+ return -EINVAL;
+
+ req->rate = ftblv->rate;
+
+ return 0;
+}
+
+static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pll *clkp = to_clk_pll(hw);
+ const struct freq_table *fv;
+ unsigned long flags;
+ u32 freq_val;
+
+ spin_lock_irqsave(&clkp->lock, flags);
+
+ if (regmap_read(clkp->clkr.regmap, clkp->freq_reg, &freq_val)) {
+ spin_unlock_irqrestore(&clkp->lock, flags);
+ return 0;
+ }
+
+ freq_val &= clkp->freq_mask;
+
+ fv = ftbl_find_by_val_with_mask(clkp->freq_tbl, clkp->freq_mask,
+ freq_val);
+
+ spin_unlock_irqrestore(&clkp->lock, flags);
+
+ return fv ? fv->rate : 0;
+}
+
+static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pll *clkp = to_clk_pll(hw);
+ const struct freq_table *fv;
+ unsigned long flags;
+ int ret;
+
+ fv = ftbl_find_by_rate(clkp->freq_tbl, rate);
+ if (!fv || fv->rate != rate)
+ return -EINVAL;
+
+ spin_lock_irqsave(&clkp->lock, flags);
+
+ if (clkp->seq_pre_set_freq) {
+ ret = regmap_multi_reg_write(clkp->clkr.regmap, clkp->seq_pre_set_freq,
+ clkp->num_seq_pre_set_freq);
+ if (ret)
+ goto unlock;
+ }
+
+ ret = regmap_update_bits(clkp->clkr.regmap, clkp->freq_reg,
+ clkp->freq_mask, fv->val);
+ if (ret)
+ goto unlock;
+
+ if (clkp->seq_post_set_freq) {
+ ret = regmap_multi_reg_write(clkp->clkr.regmap, clkp->seq_post_set_freq,
+ clkp->num_seq_post_set_freq);
+ if (ret)
+ goto unlock;
+ }
+
+ if (is_power_on(clkp)) {
+ ret = wait_freq_ready(clkp);
+ if (ret)
+ goto unlock;
+ }
+
+unlock:
+ spin_unlock_irqrestore(&clkp->lock, flags);
+
+ return ret;
+}
+
+static int clk_pll_enable(struct clk_hw *hw)
+{
+ struct clk_pll *clkp = to_clk_pll(hw);
+ unsigned long flags;
+ int ret = 0;
+
+ if (!clkp->seq_power_on)
+ return ret;
+
+ spin_lock_irqsave(&clkp->lock, flags);
+
+ if (is_power_on(clkp))
+ goto unlock;
+
+ ret = regmap_multi_reg_write(clkp->clkr.regmap, clkp->seq_power_on,
+ clkp->num_seq_power_on);
+ if (ret)
+ goto unlock;
+
+ ret = wait_freq_ready(clkp);
+ if (ret)
+ goto unlock;
+
+unlock:
+ spin_unlock_irqrestore(&clkp->lock, flags);
+
+ return ret;
+}
+
+const struct clk_ops rtk_clk_pll_ops = {
+ .enable = clk_pll_enable,
+ .disable = clk_pll_disable,
+ .is_enabled = clk_pll_is_enabled,
+ .recalc_rate = clk_pll_recalc_rate,
+ .determine_rate = clk_pll_determine_rate,
+ .set_rate = clk_pll_set_rate,
+};
+EXPORT_SYMBOL_NS_GPL(rtk_clk_pll_ops, "REALTEK_CLK");
+
+const struct clk_ops rtk_clk_pll_ro_ops = {
+ .recalc_rate = clk_pll_recalc_rate,
+};
+EXPORT_SYMBOL_NS_GPL(rtk_clk_pll_ro_ops, "REALTEK_CLK");
diff --git a/drivers/clk/realtek/clk-pll.h b/drivers/clk/realtek/clk-pll.h
new file mode 100644
index 000000000000..b70d6b3ec61e
--- /dev/null
+++ b/drivers/clk/realtek/clk-pll.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2017-2026 Realtek Semiconductor Corporation
+ * Author: Cheng-Yu Lee <cylee12@realtek.com>
+ */
+
+#ifndef __CLK_REALTEK_CLK_PLL_H
+#define __CLK_REALTEK_CLK_PLL_H
+
+#include <linux/spinlock.h>
+#include "clk-rtk-common.h"
+#include "freq_table.h"
+
+struct reg_sequence;
+
+struct clk_pll {
+ struct clk_regmap clkr;
+ const struct reg_sequence *seq_power_on;
+ u32 num_seq_power_on;
+ const struct reg_sequence *seq_power_off;
+ u32 num_seq_power_off;
+ const struct reg_sequence *seq_pre_set_freq;
+ u32 num_seq_pre_set_freq;
+ const struct reg_sequence *seq_post_set_freq;
+ u32 num_seq_post_set_freq;
+ const struct freq_table *freq_tbl;
+ u32 freq_reg;
+ u32 freq_mask;
+ u32 freq_ready_mask;
+ u32 freq_ready_reg;
+ u32 freq_ready_val;
+ u32 power_reg;
+ u32 power_mask;
+ u32 power_val_on;
+
+ /* This lock prevents race conditions when multiple CPUs or contexts
+ * simultaneously access this PLL's registers during multi-step operations
+ */
+ spinlock_t lock;
+};
+
+#define __clk_pll_hw(_ptr) __clk_regmap_hw(&(_ptr)->clkr)
+
+extern const struct clk_ops rtk_clk_pll_ops;
+extern const struct clk_ops rtk_clk_pll_ro_ops;
+
+#endif /* __CLK_REALTEK_CLK_PLL_H */
diff --git a/drivers/clk/realtek/freq_table.c b/drivers/clk/realtek/freq_table.c
new file mode 100644
index 000000000000..6ff8dbf60cc6
--- /dev/null
+++ b/drivers/clk/realtek/freq_table.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/bitops.h>
+#include "freq_table.h"
+
+#define IS_FREQ_TABLE_END(_f) ((_f)->rate == 0)
+
+const struct freq_table *ftbl_find_by_rate(const struct freq_table *ftbl,
+ unsigned long rate)
+{
+ const struct freq_table *best = NULL;
+ unsigned long best_rate = 0;
+
+ for (; !IS_FREQ_TABLE_END(ftbl); ftbl++) {
+ if (ftbl->rate == rate)
+ return ftbl;
+
+ if (ftbl->rate > rate)
+ continue;
+
+ if (ftbl->rate > best_rate) {
+ best_rate = ftbl->rate;
+ best = ftbl;
+ }
+ }
+
+ return best;
+}
+
+const struct freq_table *ftbl_find_ceil_by_rate(const struct freq_table *ftbl,
+ unsigned long rate)
+{
+ const struct freq_table *best = NULL;
+ unsigned long best_rate = ULONG_MAX;
+
+ for (; !IS_FREQ_TABLE_END(ftbl); ftbl++) {
+ if (ftbl->rate < rate)
+ continue;
+
+ if (ftbl->rate < best_rate) {
+ best_rate = ftbl->rate;
+ best = ftbl;
+ }
+ }
+
+ return best;
+}
+
+const struct freq_table *
+ftbl_find_by_val_with_mask(const struct freq_table *ftbl, u32 mask, u32 value)
+{
+ for (; !IS_FREQ_TABLE_END(ftbl); ftbl++) {
+ if ((ftbl->val & mask) == (value & mask))
+ return ftbl;
+ }
+ return NULL;
+}
diff --git a/drivers/clk/realtek/freq_table.h b/drivers/clk/realtek/freq_table.h
new file mode 100644
index 000000000000..78215aee3300
--- /dev/null
+++ b/drivers/clk/realtek/freq_table.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+struct freq_table {
+ u32 val;
+ unsigned long rate;
+};
+
+#define FREQ_TABLE_END \
+ { \
+ .rate = 0 \
+ }
+
+const struct freq_table *ftbl_find_by_rate(const struct freq_table *ftbl,
+ unsigned long rate);
+const struct freq_table *ftbl_find_ceil_by_rate(const struct freq_table *ftbl,
+ unsigned long rate);
+const struct freq_table *
+ftbl_find_by_val_with_mask(const struct freq_table *ftbl, u32 mask, u32 value);
--
2.43.0
^ permalink raw reply related
* [PATCH v9 07/12] clk: realtek: Add support for gate clock
From: Yu-Chun Lin @ 2026-06-24 11:29 UTC (permalink / raw)
To: mturquette, sboyd, robh, krzk+dt, conor+dt, p.zabel, cylee12,
afaerber, jyanchou, bmasney
Cc: devicetree, linux-clk, linux-kernel, linux-arm-kernel,
linux-realtek-soc, james.tai, cy.huang, stanley_chang,
eleanor.lin
In-Reply-To: <20260624112940.3475605-1-eleanor.lin@realtek.com>
From: Cheng-Yu Lee <cylee12@realtek.com>
Introduce clk_regmap_gate_ops supporting enable, disable, is_enabled, and
for standard regmap gate clocks.
Add clk_regmap_gate_ro_ops as a read-only variant exposing only is_enabled.
Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
---
Changes in v9:
- None.
---
drivers/clk/realtek/Makefile | 1 +
drivers/clk/realtek/clk-regmap-gate.c | 70 +++++++++++++++++++++++++++
drivers/clk/realtek/clk-regmap-gate.h | 65 +++++++++++++++++++++++++
3 files changed, 136 insertions(+)
create mode 100644 drivers/clk/realtek/clk-regmap-gate.c
create mode 100644 drivers/clk/realtek/clk-regmap-gate.h
diff --git a/drivers/clk/realtek/Makefile b/drivers/clk/realtek/Makefile
index 71edc18121c6..90c0658a83bf 100644
--- a/drivers/clk/realtek/Makefile
+++ b/drivers/clk/realtek/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_RTK_CLK_COMMON) += clk-rtk.o
clk-rtk-y += clk-rtk-common.o
clk-rtk-y += clk-pll.o
clk-rtk-y += freq_table.o
+clk-rtk-y += clk-regmap-gate.o
diff --git a/drivers/clk/realtek/clk-regmap-gate.c b/drivers/clk/realtek/clk-regmap-gate.c
new file mode 100644
index 000000000000..0db0057215e3
--- /dev/null
+++ b/drivers/clk/realtek/clk-regmap-gate.c
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017-2026 Realtek Semiconductor Corporation
+ * Author: Cheng-Yu Lee <cylee12@realtek.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/clk-provider.h>
+#include <linux/export.h>
+#include <linux/regmap.h>
+#include "clk-regmap-gate.h"
+
+static int clk_regmap_gate_enable(struct clk_hw *hw)
+{
+ struct clk_regmap_gate *clkg = to_clk_regmap_gate(hw);
+ unsigned int mask;
+ unsigned int val;
+
+ mask = BIT(clkg->bit_idx);
+ val = BIT(clkg->bit_idx);
+
+ if (clkg->write_en) {
+ mask |= BIT(clkg->bit_idx + 1);
+ val |= BIT(clkg->bit_idx + 1);
+ }
+
+ return regmap_update_bits(clkg->clkr.regmap, clkg->gate_ofs, mask, val);
+}
+
+static void clk_regmap_gate_disable(struct clk_hw *hw)
+{
+ struct clk_regmap_gate *clkg = to_clk_regmap_gate(hw);
+ unsigned int mask;
+ unsigned int val;
+
+ mask = BIT(clkg->bit_idx);
+ val = 0;
+
+ if (clkg->write_en) {
+ mask |= BIT(clkg->bit_idx + 1);
+ val |= BIT(clkg->bit_idx + 1);
+ }
+
+ regmap_update_bits(clkg->clkr.regmap, clkg->gate_ofs, mask, val);
+}
+
+static int clk_regmap_gate_is_enabled(struct clk_hw *hw)
+{
+ struct clk_regmap_gate *clkg = to_clk_regmap_gate(hw);
+ int ret;
+ u32 val;
+
+ ret = regmap_read(clkg->clkr.regmap, clkg->gate_ofs, &val);
+ if (ret < 0)
+ return ret;
+
+ return !!(val & BIT(clkg->bit_idx));
+}
+
+const struct clk_ops rtk_clk_regmap_gate_ops = {
+ .enable = clk_regmap_gate_enable,
+ .disable = clk_regmap_gate_disable,
+ .is_enabled = clk_regmap_gate_is_enabled,
+};
+EXPORT_SYMBOL_NS_GPL(rtk_clk_regmap_gate_ops, "REALTEK_CLK");
+
+const struct clk_ops rtk_clk_regmap_gate_ro_ops = {
+ .is_enabled = clk_regmap_gate_is_enabled,
+};
+EXPORT_SYMBOL_NS_GPL(rtk_clk_regmap_gate_ro_ops, "REALTEK_CLK");
diff --git a/drivers/clk/realtek/clk-regmap-gate.h b/drivers/clk/realtek/clk-regmap-gate.h
new file mode 100644
index 000000000000..3f4c7a784eb0
--- /dev/null
+++ b/drivers/clk/realtek/clk-regmap-gate.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2017-2026 Realtek Semiconductor Corporation
+ * Author: Cheng-Yu Lee <cylee12@realtek.com>
+ */
+
+#ifndef __CLK_REALTEK_CLK_REGMAP_GATE_H
+#define __CLK_REALTEK_CLK_REGMAP_GATE_H
+
+#include "clk-rtk-common.h"
+
+struct clk_regmap_gate {
+ struct clk_regmap clkr;
+ int gate_ofs;
+ u8 bit_idx;
+ u32 write_en : 1;
+};
+
+#define __clk_regmap_gate_hw(_p) __clk_regmap_hw(&(_p)->clkr)
+
+#define __CLK_REGMAP_GATE(_name, _parent, _ops, _flags, _ofs, _bit_idx, \
+ _write_en) \
+ struct clk_regmap_gate _name = { \
+ .clkr.hw.init = CLK_HW_INIT(#_name, _parent, _ops, _flags), \
+ .gate_ofs = _ofs, \
+ .bit_idx = _bit_idx, \
+ .write_en = _write_en, \
+ }
+
+#define CLK_REGMAP_GATE(_name, _parent, _flags, _ofs, _bit_idx, _write_en) \
+ __CLK_REGMAP_GATE(_name, _parent, &rtk_clk_regmap_gate_ops, _flags, _ofs, \
+ _bit_idx, _write_en)
+
+#define CLK_REGMAP_GATE_RO(_name, _parent, _flags, _ofs, _bit_idx, _write_en) \
+ __CLK_REGMAP_GATE(_name, _parent, &rtk_clk_regmap_gate_ro_ops, _flags, \
+ _ofs, _bit_idx, _write_en)
+
+#define __CLK_REGMAP_GATE_NO_PARENT(_name, _ops, _flags, _ofs, _bit_idx, \
+ _write_en) \
+ struct clk_regmap_gate _name = { \
+ .clkr.hw.init = CLK_HW_INIT_NO_PARENT(#_name, _ops, _flags), \
+ .gate_ofs = _ofs, \
+ .bit_idx = _bit_idx, \
+ .write_en = _write_en, \
+ }
+
+#define CLK_REGMAP_GATE_NO_PARENT(_name, _flags, _ofs, _bit_idx, _write_en) \
+ __CLK_REGMAP_GATE_NO_PARENT(_name, &rtk_clk_regmap_gate_ops, _flags, _ofs, \
+ _bit_idx, _write_en)
+
+#define CLK_REGMAP_GATE_NO_PARENT_RO(_name, _flags, _ofs, _bit_idx, _write_en) \
+ __CLK_REGMAP_GATE_NO_PARENT(_name, &rtk_clk_regmap_gate_ro_ops, _flags, \
+ _ofs, _bit_idx, _write_en)
+
+static inline struct clk_regmap_gate *to_clk_regmap_gate(struct clk_hw *hw)
+{
+ struct clk_regmap *clkr = to_clk_regmap(hw);
+
+ return container_of(clkr, struct clk_regmap_gate, clkr);
+}
+
+extern const struct clk_ops rtk_clk_regmap_gate_ops;
+extern const struct clk_ops rtk_clk_regmap_gate_ro_ops;
+
+#endif /* __CLK_REALTEK_CLK_REGMAP_GATE_H */
--
2.43.0
^ permalink raw reply related
* [PATCH v9 11/12] clk: realtek: Add RTD1625-ISO clock controller driver
From: Yu-Chun Lin @ 2026-06-24 11:29 UTC (permalink / raw)
To: mturquette, sboyd, robh, krzk+dt, conor+dt, p.zabel, cylee12,
afaerber, jyanchou, bmasney
Cc: devicetree, linux-clk, linux-kernel, linux-arm-kernel,
linux-realtek-soc, james.tai, cy.huang, stanley_chang,
eleanor.lin
In-Reply-To: <20260624112940.3475605-1-eleanor.lin@realtek.com>
From: Cheng-Yu Lee <cylee12@realtek.com>
Add support for the ISO (Isolation) domain clock controller on the Realtek
RTD1625 SoC. This controller manages clocks in the always-on power domain,
ensuring essential services remain functional even when the main system
power is gated.
Because the reset controller shares the same register space with this ISO
clock controller, this driver also acts as the parent device and registers
the reset controller as an auxiliary device on the auxiliary bus.
Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
---
Changes in v9:
- Remove reset-related code to patch 4.
---
drivers/clk/realtek/Makefile | 1 +
drivers/clk/realtek/clk-rtd1625-iso.c | 151 ++++++++++++++++++++++++++
2 files changed, 152 insertions(+)
create mode 100644 drivers/clk/realtek/clk-rtd1625-iso.c
diff --git a/drivers/clk/realtek/Makefile b/drivers/clk/realtek/Makefile
index 15b9eec74e36..fbf8cb0db2f0 100644
--- a/drivers/clk/realtek/Makefile
+++ b/drivers/clk/realtek/Makefile
@@ -9,3 +9,4 @@ clk-rtk-y += clk-regmap-mux.o
clk-rtk-$(CONFIG_RTK_CLK_PLL_MMC) += clk-pll-mmc.o
obj-$(CONFIG_CLK_RTD1625) += clk-rtd1625-crt.o
+obj-$(CONFIG_CLK_RTD1625) += clk-rtd1625-iso.o
diff --git a/drivers/clk/realtek/clk-rtd1625-iso.c b/drivers/clk/realtek/clk-rtd1625-iso.c
new file mode 100644
index 000000000000..52c4a4304284
--- /dev/null
+++ b/drivers/clk/realtek/clk-rtd1625-iso.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2024-2026 Realtek Semiconductor Corporation
+ * Author: Cheng-Yu Lee <cylee12@realtek.com>
+ */
+
+#include <dt-bindings/clock/realtek,rtd1625-clk.h>
+#include <linux/array_size.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "clk-regmap-gate.h"
+
+#define RTD1625_ISO_CLK_MAX 19
+#define RTD1625_ISO_RSTN_MAX 29
+#define RTD1625_ISO_S_CLK_MAX 5
+#define RTD1625_ISO_S_RSTN_MAX 5
+
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_usb_p4, 0, 0x4, 0, 0);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_usb_p3, 0, 0x4, 1, 0);
+static CLK_REGMAP_GATE(clk_en_misc_cec0, "clk_en_misc", 0, 0x4, 2, 0);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_cbusrx_sys, 0, 0x4, 3, 0);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_cbustx_sys, 0, 0x4, 4, 0);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_cbus_sys, 0, 0x4, 5, 0);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_cbus_osc, 0, 0x4, 6, 0);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_i2c0, 0, 0x4, 9, 0);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_i2c1, 0, 0x4, 10, 0);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_etn_250m, 0, 0x4, 11, 0);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_etn_sys, 0, 0x4, 12, 0);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_usb_drd, 0, 0x4, 13, 0);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_usb_host, 0, 0x4, 14, 0);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_usb_u3_host, 0, 0x4, 15, 0);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_usb, 0, 0x4, 16, 0);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_vtc, 0, 0x4, 17, 0);
+static CLK_REGMAP_GATE(clk_en_misc_vfd, "clk_en_misc", 0, 0x4, 18, 0);
+
+static struct clk_regmap * const rtd1625_clk_regmap_list[] = {
+ &clk_en_usb_p4.clkr,
+ &clk_en_usb_p3.clkr,
+ &clk_en_misc_cec0.clkr,
+ &clk_en_cbusrx_sys.clkr,
+ &clk_en_cbustx_sys.clkr,
+ &clk_en_cbus_sys.clkr,
+ &clk_en_cbus_osc.clkr,
+ &clk_en_i2c0.clkr,
+ &clk_en_i2c1.clkr,
+ &clk_en_etn_250m.clkr,
+ &clk_en_etn_sys.clkr,
+ &clk_en_usb_drd.clkr,
+ &clk_en_usb_host.clkr,
+ &clk_en_usb_u3_host.clkr,
+ &clk_en_usb.clkr,
+ &clk_en_vtc.clkr,
+ &clk_en_misc_vfd.clkr,
+};
+
+static struct clk_hw_onecell_data rtd1625_iso_clk_data = {
+ .num = RTD1625_ISO_CLK_MAX,
+ .hws = {
+ [RTD1625_ISO_CLK_EN_USB_P4] = &__clk_regmap_gate_hw(&clk_en_usb_p4),
+ [RTD1625_ISO_CLK_EN_USB_P3] = &__clk_regmap_gate_hw(&clk_en_usb_p3),
+ [RTD1625_ISO_CLK_EN_MISC_CEC0] = &__clk_regmap_gate_hw(&clk_en_misc_cec0),
+ [RTD1625_ISO_CLK_EN_CBUSRX_SYS] = &__clk_regmap_gate_hw(&clk_en_cbusrx_sys),
+ [RTD1625_ISO_CLK_EN_CBUSTX_SYS] = &__clk_regmap_gate_hw(&clk_en_cbustx_sys),
+ [RTD1625_ISO_CLK_EN_CBUS_SYS] = &__clk_regmap_gate_hw(&clk_en_cbus_sys),
+ [RTD1625_ISO_CLK_EN_CBUS_OSC] = &__clk_regmap_gate_hw(&clk_en_cbus_osc),
+ [RTD1625_ISO_CLK_EN_I2C0] = &__clk_regmap_gate_hw(&clk_en_i2c0),
+ [RTD1625_ISO_CLK_EN_I2C1] = &__clk_regmap_gate_hw(&clk_en_i2c1),
+ [RTD1625_ISO_CLK_EN_ETN_250M] = &__clk_regmap_gate_hw(&clk_en_etn_250m),
+ [RTD1625_ISO_CLK_EN_ETN_SYS] = &__clk_regmap_gate_hw(&clk_en_etn_sys),
+ [RTD1625_ISO_CLK_EN_USB_DRD] = &__clk_regmap_gate_hw(&clk_en_usb_drd),
+ [RTD1625_ISO_CLK_EN_USB_HOST] = &__clk_regmap_gate_hw(&clk_en_usb_host),
+ [RTD1625_ISO_CLK_EN_USB_U3_HOST] = &__clk_regmap_gate_hw(&clk_en_usb_u3_host),
+ [RTD1625_ISO_CLK_EN_USB] = &__clk_regmap_gate_hw(&clk_en_usb),
+ [RTD1625_ISO_CLK_EN_VTC] = &__clk_regmap_gate_hw(&clk_en_vtc),
+ [RTD1625_ISO_CLK_EN_MISC_VFD] = &__clk_regmap_gate_hw(&clk_en_misc_vfd),
+ },
+};
+
+static const struct rtk_clk_desc rtd1625_iso_desc = {
+ .clk_data = &rtd1625_iso_clk_data,
+ .clks = rtd1625_clk_regmap_list,
+ .num_clks = ARRAY_SIZE(rtd1625_clk_regmap_list),
+};
+
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_irda, 0, 0x4, 6, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_ur10, 0, 0x4, 8, 1);
+
+static struct clk_regmap * const rtd1625_iso_s_clk_regmap_list[] = {
+ &clk_en_irda.clkr,
+ &clk_en_ur10.clkr,
+};
+
+static struct clk_hw_onecell_data rtd1625_iso_s_clk_data = {
+ .num = RTD1625_ISO_S_CLK_MAX,
+ .hws = {
+ [RTD1625_ISO_S_CLK_EN_IRDA] = &__clk_regmap_gate_hw(&clk_en_irda),
+ [RTD1625_ISO_S_CLK_EN_UR10] = &__clk_regmap_gate_hw(&clk_en_ur10),
+ },
+};
+
+static const struct rtk_clk_desc rtd1625_iso_s_desc = {
+ .clk_data = &rtd1625_iso_s_clk_data,
+ .clks = rtd1625_iso_s_clk_regmap_list,
+ .num_clks = ARRAY_SIZE(rtd1625_iso_s_clk_regmap_list),
+};
+
+static int rtd1625_iso_probe(struct platform_device *pdev)
+{
+ const struct rtk_clk_desc *desc;
+ const char *aux_name = NULL;
+
+ desc = of_device_get_match_data(&pdev->dev);
+ if (!desc)
+ return -EINVAL;
+
+ if (of_device_is_compatible(pdev->dev.of_node, "realtek,rtd1625-iso-clk"))
+ aux_name = "iso_rst";
+ else
+ aux_name = "iso_s_rst";
+
+ return rtk_clk_probe(pdev, desc, aux_name);
+}
+
+static const struct of_device_id rtd1625_iso_match[] = {
+ {.compatible = "realtek,rtd1625-iso-clk", .data = &rtd1625_iso_desc},
+ {.compatible = "realtek,rtd1625-iso-s-clk", .data = &rtd1625_iso_s_desc},
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rtd1625_iso_match);
+
+static struct platform_driver rtd1625_iso_driver = {
+ .probe = rtd1625_iso_probe,
+ .driver = {
+ .name = "rtk-rtd1625-iso-clk",
+ .of_match_table = rtd1625_iso_match,
+ .suppress_bind_attrs = true,
+ },
+};
+
+static int __init rtd1625_iso_init(void)
+{
+ return platform_driver_register(&rtd1625_iso_driver);
+}
+subsys_initcall(rtd1625_iso_init);
+
+MODULE_DESCRIPTION("Realtek RTD1625 ISO Clock Controller Driver");
+MODULE_AUTHOR("Cheng-Yu Lee <cylee12@realtek.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("REALTEK_CLK");
--
2.43.0
^ permalink raw reply related
* [PATCH v9 02/12] reset: Add Realtek basic reset support
From: Yu-Chun Lin @ 2026-06-24 11:29 UTC (permalink / raw)
To: mturquette, sboyd, robh, krzk+dt, conor+dt, p.zabel, cylee12,
afaerber, jyanchou, bmasney
Cc: devicetree, linux-clk, linux-kernel, linux-arm-kernel,
linux-realtek-soc, james.tai, cy.huang, stanley_chang,
eleanor.lin
In-Reply-To: <20260624112940.3475605-1-eleanor.lin@realtek.com>
From: Cheng-Yu Lee <cylee12@realtek.com>
Define the reset operations backed by a regmap-based register interface
and prepare the reset controller to be registered through the reset
framework.
Since the reset controllers on Realtek SoCs often share the same register
space with the clock controllers, this common framework is designed to
extract the regmap and device tree node from the parent device
(e.g., an auxiliary device parent).
Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
---
Changes in v8:
- Rename common.[ch] to reset-rtk-common.[ch].
---
MAINTAINERS | 1 +
drivers/reset/Kconfig | 1 +
drivers/reset/Makefile | 1 +
drivers/reset/realtek/Kconfig | 8 +++
drivers/reset/realtek/Makefile | 2 +
drivers/reset/realtek/reset-rtk-common.c | 90 ++++++++++++++++++++++++
drivers/reset/realtek/reset-rtk-common.h | 29 ++++++++
7 files changed, 132 insertions(+)
create mode 100644 drivers/reset/realtek/Kconfig
create mode 100644 drivers/reset/realtek/Makefile
create mode 100644 drivers/reset/realtek/reset-rtk-common.c
create mode 100644 drivers/reset/realtek/reset-rtk-common.h
diff --git a/MAINTAINERS b/MAINTAINERS
index d9df9b120e55..3bc431a2a7d1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -22675,6 +22675,7 @@ L: devicetree@vger.kernel.org
L: linux-clk@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/clock/realtek*
+F: drivers/reset/realtek/*
F: include/dt-bindings/clock/realtek*
F: include/dt-bindings/reset/realtek*
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index d009eb0849a3..45a4227b5f44 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -418,6 +418,7 @@ config RESET_ZYNQMP
source "drivers/reset/amlogic/Kconfig"
source "drivers/reset/hisilicon/Kconfig"
+source "drivers/reset/realtek/Kconfig"
source "drivers/reset/spacemit/Kconfig"
source "drivers/reset/starfive/Kconfig"
source "drivers/reset/sti/Kconfig"
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 3e52569bd276..7330fee91365 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -2,6 +2,7 @@
obj-y += core.o
obj-y += amlogic/
obj-y += hisilicon/
+obj-y += realtek/
obj-y += spacemit/
obj-y += starfive/
obj-y += sti/
diff --git a/drivers/reset/realtek/Kconfig b/drivers/reset/realtek/Kconfig
new file mode 100644
index 000000000000..bb6dd856a64a
--- /dev/null
+++ b/drivers/reset/realtek/Kconfig
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config RESET_RTK_COMMON
+ tristate "Realtek common reset driver" if COMPILE_TEST
+ help
+ This option enables the common reset controller library for
+ Realtek SoCs. It provides shared reset control operations
+ (assert, deassert, status) and a registration helper function
+ that other Realtek-specific reset drivers can use.
diff --git a/drivers/reset/realtek/Makefile b/drivers/reset/realtek/Makefile
new file mode 100644
index 000000000000..6d68e41748bf
--- /dev/null
+++ b/drivers/reset/realtek/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_RESET_RTK_COMMON) += reset-rtk-common.o
diff --git a/drivers/reset/realtek/reset-rtk-common.c b/drivers/reset/realtek/reset-rtk-common.c
new file mode 100644
index 000000000000..75b27cb2a208
--- /dev/null
+++ b/drivers/reset/realtek/reset-rtk-common.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019-2026 Realtek Semiconductor Corporation
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include "reset-rtk-common.h"
+
+static inline struct rtk_reset_data *to_rtk_reset_controller(struct reset_controller_dev *r)
+{
+ return container_of(r, struct rtk_reset_data, rcdev);
+}
+
+static inline const struct rtk_reset_desc *rtk_reset_get_desc(struct rtk_reset_data *data,
+ unsigned long idx)
+{
+ return &data->descs[idx];
+}
+
+static int rtk_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ struct rtk_reset_data *data = to_rtk_reset_controller(rcdev);
+ const struct rtk_reset_desc *desc;
+ u32 mask, val;
+
+ desc = rtk_reset_get_desc(data, idx);
+ mask = desc->write_en ? (0x3U << desc->bit) : BIT(desc->bit);
+ val = desc->write_en ? (0x2U << desc->bit) : 0;
+
+ return regmap_update_bits(data->regmap, desc->ofs, mask, val);
+}
+
+static int rtk_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ struct rtk_reset_data *data = to_rtk_reset_controller(rcdev);
+ const struct rtk_reset_desc *desc;
+ u32 mask, val;
+
+ desc = rtk_reset_get_desc(data, idx);
+ mask = desc->write_en ? (0x3U << desc->bit) : BIT(desc->bit);
+ val = mask;
+
+ return regmap_update_bits(data->regmap, desc->ofs, mask, val);
+}
+
+static int rtk_reset_status(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ struct rtk_reset_data *data = to_rtk_reset_controller(rcdev);
+ const struct rtk_reset_desc *desc;
+ u32 val;
+ int ret;
+
+ desc = rtk_reset_get_desc(data, idx);
+ ret = regmap_read(data->regmap, desc->ofs, &val);
+ if (ret)
+ return ret;
+
+ return !((val >> desc->bit) & 1);
+}
+
+static const struct reset_control_ops rtk_reset_ops = {
+ .assert = rtk_reset_assert,
+ .deassert = rtk_reset_deassert,
+ .status = rtk_reset_status,
+};
+
+/* The caller must initialize data->descs, data->rcdev.nr_resets and
+ * data->rcdev.owner before calling rtk_reset_controller_add().
+ */
+int rtk_reset_controller_add(struct device *dev,
+ struct rtk_reset_data *data)
+{
+ data->regmap = dev_get_platdata(dev);
+ data->rcdev.ops = &rtk_reset_ops;
+ data->rcdev.dev = dev;
+ data->rcdev.of_node = dev->parent->of_node;
+
+ return devm_reset_controller_register(dev, &data->rcdev);
+}
+EXPORT_SYMBOL_NS_GPL(rtk_reset_controller_add, "REALTEK_RESET");
+
+MODULE_DESCRIPTION("realtek reset infrastructure");
+MODULE_LICENSE("GPL");
diff --git a/drivers/reset/realtek/reset-rtk-common.h b/drivers/reset/realtek/reset-rtk-common.h
new file mode 100644
index 000000000000..42eb41eae2ec
--- /dev/null
+++ b/drivers/reset/realtek/reset-rtk-common.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2026 Realtek Semiconductor Corporation
+ * Author: Yu-Chun Lin <eleanor.lin@realtek.com>
+ */
+
+#ifndef __RESET_REALTEK_COMMON_H
+#define __RESET_REALTEK_COMMON_H
+
+#include <linux/reset-controller.h>
+
+struct regmap;
+
+struct rtk_reset_desc {
+ u32 ofs;
+ u32 bit;
+ bool write_en;
+};
+
+struct rtk_reset_data {
+ struct reset_controller_dev rcdev;
+ const struct rtk_reset_desc *descs;
+ struct regmap *regmap;
+};
+
+int rtk_reset_controller_add(struct device *dev,
+ struct rtk_reset_data *initdata);
+
+#endif /* __RESET_REALTEK_COMMON_H */
--
2.43.0
^ permalink raw reply related
* [PATCH v9 12/12] arm64: dts: realtek: Add clock support for RTD1625
From: Yu-Chun Lin @ 2026-06-24 11:29 UTC (permalink / raw)
To: mturquette, sboyd, robh, krzk+dt, conor+dt, p.zabel, cylee12,
afaerber, jyanchou, bmasney
Cc: devicetree, linux-clk, linux-kernel, linux-arm-kernel,
linux-realtek-soc, james.tai, cy.huang, stanley_chang,
eleanor.lin
In-Reply-To: <20260624112940.3475605-1-eleanor.lin@realtek.com>
Add the clock controller nodes and osc27m fixed clock for the
Realtek RTD1625 SoC.
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
---
Changes in v9:
- None.
---
arch/arm64/boot/dts/realtek/kent.dtsi | 33 +++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/realtek/kent.dtsi b/arch/arm64/boot/dts/realtek/kent.dtsi
index 8d4293cd4c03..409d46a73c91 100644
--- a/arch/arm64/boot/dts/realtek/kent.dtsi
+++ b/arch/arm64/boot/dts/realtek/kent.dtsi
@@ -26,6 +26,15 @@ timer {
<GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
+ clocks {
+ osc27m: osc {
+ compatible = "fixed-clock";
+ clock-frequency = <27000000>;
+ clock-output-names = "osc27m";
+ #clock-cells = <0>;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -141,6 +150,22 @@ rbus: bus@98000000 {
#address-cells = <1>;
#size-cells = <1>;
+ cc: clock-controller@0 {
+ compatible = "realtek,rtd1625-crt-clk";
+ reg = <0x0 0x900>;
+ clocks = <&osc27m>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ ic: clock-controller@7088 {
+ compatible = "realtek,rtd1625-iso-clk";
+ reg = <0x7088 0x8>;
+ clocks = <&osc27m>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
uart0: serial@7800 {
compatible = "snps,dw-apb-uart";
reg = <0x7800 0x100>;
@@ -166,6 +191,14 @@ isom_pinctrl: pinctrl@146200 {
reg = <0x146200 0x34>;
};
+ iso_s_cc: clock-controller@146310 {
+ compatible = "realtek,rtd1625-iso-s-clk";
+ reg = <0x146310 0x8>;
+ clocks = <&osc27m>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
ve4_pinctrl: pinctrl@14e000 {
compatible = "realtek,rtd1625-ve4-pinctrl";
reg = <0x14e000 0x84>;
--
2.43.0
^ permalink raw reply related
* [PATCH v9 09/12] clk: realtek: Add support for MMC-tuned PLL clocks
From: Yu-Chun Lin @ 2026-06-24 11:29 UTC (permalink / raw)
To: mturquette, sboyd, robh, krzk+dt, conor+dt, p.zabel, cylee12,
afaerber, jyanchou, bmasney
Cc: devicetree, linux-clk, linux-kernel, linux-arm-kernel,
linux-realtek-soc, james.tai, cy.huang, stanley_chang,
eleanor.lin
In-Reply-To: <20260624112940.3475605-1-eleanor.lin@realtek.com>
From: Cheng-Yu Lee <cylee12@realtek.com>
Add clk_pll_mmc_ops for enable/disable, prepare, rate control, and status
operations on MMC PLL clocks.
Also add clk_pll_mmc_phase_ops to support phase get/set operations.
Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
Co-developed-by: Jyan Chou <jyanchou@realtek.com>
Signed-off-by: Jyan Chou <jyanchou@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
---
Changes in v9:
- Fix potential integer overflow on 32-bit architectures in
'clk_pll_mmc_determine_rate()' by casting to 'u64' and using
'DIV_ROUND_CLOSEST_ULL()'.
- Add comments in 'clk_pll_mmc_set_rate()' to clarify why 'rate' and
'parent_rate' are intentionally unused.
MAINTAINERS | 8 +
drivers/clk/realtek/Kconfig | 3 +
drivers/clk/realtek/Makefile | 2 +
drivers/clk/realtek/clk-pll-mmc.c | 430 ++++++++++++++++++++++++++++++
drivers/clk/realtek/clk-pll.h | 13 +
5 files changed, 456 insertions(+)
create mode 100644 drivers/clk/realtek/clk-pll-mmc.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 9cdcb333b68f..071110948cc8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -22680,6 +22680,14 @@ F: drivers/reset/realtek/*
F: include/dt-bindings/clock/realtek*
F: include/dt-bindings/reset/realtek*
+REALTEK SOC PLL CLOCK FOR MMC SUPPORT
+M: Cheng-Yu Lee <cylee12@realtek.com>
+M: Jyan Chou <jyanchou@realtek.com>
+M: Yu-Chun Lin <eleanor.lin@realtek.com>
+L: linux-clk@vger.kernel.org
+S: Supported
+F: drivers/clk/realtek/clk-pll-mmc.c
+
REALTEK SPI-NAND
M: Chris Packham <chris.packham@alliedtelesis.co.nz>
S: Maintained
diff --git a/drivers/clk/realtek/Kconfig b/drivers/clk/realtek/Kconfig
index ed97531e321d..2ff780581ae0 100644
--- a/drivers/clk/realtek/Kconfig
+++ b/drivers/clk/realtek/Kconfig
@@ -27,4 +27,7 @@ config RTK_CLK_COMMON
multiple Realtek clock implementations, and include integration
with reset controllers where required.
+config RTK_CLK_PLL_MMC
+ bool
+
endif
diff --git a/drivers/clk/realtek/Makefile b/drivers/clk/realtek/Makefile
index 3b014240a211..97447e92bc35 100644
--- a/drivers/clk/realtek/Makefile
+++ b/drivers/clk/realtek/Makefile
@@ -6,3 +6,5 @@ clk-rtk-y += clk-pll.o
clk-rtk-y += freq_table.o
clk-rtk-y += clk-regmap-gate.o
clk-rtk-y += clk-regmap-mux.o
+
+clk-rtk-$(CONFIG_RTK_CLK_PLL_MMC) += clk-pll-mmc.o
diff --git a/drivers/clk/realtek/clk-pll-mmc.c b/drivers/clk/realtek/clk-pll-mmc.c
new file mode 100644
index 000000000000..eefb0da04823
--- /dev/null
+++ b/drivers/clk/realtek/clk-pll-mmc.c
@@ -0,0 +1,430 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021-2026 Realtek Semiconductor Corporation
+ * Author: Cheng-Yu Lee <cylee12@realtek.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/export.h>
+#include <linux/math64.h>
+#include <linux/minmax.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include "clk-pll.h"
+
+#define PLL_MMC_VAL_MIN 1
+#define PLL_MMC_VAL_MAX 255
+
+#define PLL_EMMC1_OFFSET 0x0
+#define PLL_EMMC2_OFFSET 0x4
+#define PLL_EMMC3_OFFSET 0x8
+#define PLL_EMMC4_OFFSET 0xc
+#define PLL_SSC_DIG_EMMC1_OFFSET 0x0
+#define PLL_SSC_DIG_EMMC3_OFFSET 0xc
+#define PLL_SSC_DIG_EMMC4_OFFSET 0x10
+
+#define PLL_MMC_SSC_DIV_N_VAL 0x1b
+
+#define PLL_PHRT0_MASK BIT(0)
+#define PLL_PHSEL_MASK GENMASK(4, 0)
+#define PLL_SSCPLL_RS_MASK GENMASK(12, 10)
+#define PLL_SSCPLL_ICP_MASK GENMASK(9, 5)
+#define PLL_SSC_DIV_EXT_F_MASK GENMASK(25, 13)
+#define PLL_PI_IBSELH_MASK GENMASK(28, 27)
+#define PLL_SSC_DIV_N_MASK GENMASK(23, 16)
+#define PLL_NCODE_SSC_EMMC_MASK GENMASK(20, 13)
+#define PLL_FCODE_SSC_EMMC_MASK GENMASK(12, 0)
+#define PLL_GRAN_EST_EM_MC_MASK GENMASK(20, 0)
+#define PLL_EN_SSC_EMMC_MASK BIT(0)
+#define PLL_FLAG_INITAL_EMMC_MASK BIT(8)
+
+#define PLL_PHRT0_SHIFT 1
+#define PLL_SSCPLL_RS_SHIFT 10
+#define PLL_SSCPLL_ICP_SHIFT 5
+#define PLL_SSC_DIV_EXT_F_SHIFT 13
+#define PLL_PI_IBSELH_SHIFT 27
+#define PLL_SSC_DIV_N_SHIFT 16
+#define PLL_NCODE_SSC_EMMC_SHIFT 13
+#define PLL_FLAG_INITAL_EMMC_SHIFT 8
+
+#define CYCLE_DEGREES 360
+#define PHASE_STEPS 32
+#define PHASE_SCALE_FACTOR 1125
+
+static inline struct clk_pll_mmc *to_clk_pll_mmc(struct clk_hw *hw)
+{
+ struct clk_regmap *clkr = to_clk_regmap(hw);
+
+ return container_of(clkr, struct clk_pll_mmc, clkr);
+}
+
+static inline int get_phrt0(struct clk_pll_mmc *clkm, u32 *val)
+{
+ u32 reg;
+ int ret;
+
+ ret = regmap_read(clkm->clkr.regmap, clkm->pll_ofs + PLL_EMMC1_OFFSET, ®);
+ if (ret)
+ return ret;
+
+ *val = (reg >> PLL_PHRT0_SHIFT) & PLL_PHRT0_MASK;
+
+ return 0;
+}
+
+static inline int set_phrt0(struct clk_pll_mmc *clkm, u32 val)
+{
+ return regmap_update_bits(clkm->clkr.regmap, clkm->pll_ofs + PLL_EMMC1_OFFSET,
+ PLL_PHRT0_MASK << PLL_PHRT0_SHIFT, val << PLL_PHRT0_SHIFT);
+}
+
+static inline int get_phsel(struct clk_pll_mmc *clkm, int id, u32 *val)
+{
+ u32 sft = id ? 8 : 3;
+ u32 raw_val;
+ int ret;
+
+ ret = regmap_read(clkm->clkr.regmap, clkm->pll_ofs + PLL_EMMC1_OFFSET, &raw_val);
+ if (ret)
+ return ret;
+
+ *val = (raw_val >> sft) & PLL_PHSEL_MASK;
+
+ return 0;
+}
+
+static inline int set_phsel(struct clk_pll_mmc *clkm, int id, u32 val)
+{
+ u32 sft = id ? 8 : 3;
+
+ return regmap_update_bits(clkm->clkr.regmap, clkm->pll_ofs + PLL_EMMC1_OFFSET,
+ PLL_PHSEL_MASK << sft, val << sft);
+}
+
+static inline int set_sscpll_rs(struct clk_pll_mmc *clkm, u32 val)
+{
+ return regmap_update_bits(clkm->clkr.regmap, clkm->pll_ofs + PLL_EMMC2_OFFSET,
+ PLL_SSCPLL_RS_MASK, val << PLL_SSCPLL_RS_SHIFT);
+}
+
+static inline int set_sscpll_icp(struct clk_pll_mmc *clkm, u32 val)
+{
+ return regmap_update_bits(clkm->clkr.regmap, clkm->pll_ofs + PLL_EMMC2_OFFSET,
+ PLL_SSCPLL_ICP_MASK, val << PLL_SSCPLL_ICP_SHIFT);
+}
+
+static inline int get_ssc_div_ext_f(struct clk_pll_mmc *clkm, u32 *val)
+{
+ u32 raw_val;
+ int ret;
+
+ ret = regmap_read(clkm->clkr.regmap, clkm->pll_ofs + PLL_EMMC2_OFFSET, &raw_val);
+ if (ret)
+ return ret;
+
+ *val = (raw_val & PLL_SSC_DIV_EXT_F_MASK) >> PLL_SSC_DIV_EXT_F_SHIFT;
+
+ return 0;
+}
+
+static inline int set_ssc_div_ext_f(struct clk_pll_mmc *clkm, u32 val)
+{
+ return regmap_update_bits(clkm->clkr.regmap, clkm->pll_ofs + PLL_EMMC2_OFFSET,
+ PLL_SSC_DIV_EXT_F_MASK,
+ val << PLL_SSC_DIV_EXT_F_SHIFT);
+}
+
+static inline int set_pi_ibselh(struct clk_pll_mmc *clkm, u32 val)
+{
+ return regmap_update_bits(clkm->clkr.regmap, clkm->pll_ofs + PLL_EMMC2_OFFSET,
+ PLL_PI_IBSELH_MASK, val << PLL_PI_IBSELH_SHIFT);
+}
+
+static inline int set_ssc_div_n(struct clk_pll_mmc *clkm, u32 val)
+{
+ return regmap_update_bits(clkm->clkr.regmap, clkm->pll_ofs + PLL_EMMC3_OFFSET,
+ PLL_SSC_DIV_N_MASK, val << PLL_SSC_DIV_N_SHIFT);
+}
+
+static inline int get_ssc_div_n(struct clk_pll_mmc *clkm, u32 *val)
+{
+ int ret;
+ u32 raw_val;
+
+ ret = regmap_read(clkm->clkr.regmap, clkm->pll_ofs + PLL_EMMC3_OFFSET, &raw_val);
+ if (ret)
+ return ret;
+
+ *val = (raw_val & PLL_SSC_DIV_N_MASK) >> PLL_SSC_DIV_N_SHIFT;
+
+ return 0;
+}
+
+static inline int set_pow_ctl(struct clk_pll_mmc *clkm, u32 val)
+{
+ return regmap_write(clkm->clkr.regmap, clkm->pll_ofs + PLL_EMMC4_OFFSET, val);
+}
+
+static inline int get_pow_ctl(struct clk_pll_mmc *clkm, u32 *val)
+{
+ int ret;
+ u32 raw_val;
+
+ ret = regmap_read(clkm->clkr.regmap, clkm->pll_ofs + PLL_EMMC4_OFFSET, &raw_val);
+ if (ret)
+ return ret;
+
+ *val = raw_val;
+
+ return 0;
+}
+
+static int clk_pll_mmc_phase_set_phase(struct clk_hw *hw, int degrees)
+{
+ struct clk_hw *hwp = clk_hw_get_parent(hw);
+ struct clk_pll_mmc *clkm;
+ int phase_id;
+ int ret;
+ u32 val;
+
+ if (!hwp)
+ return -ENOENT;
+
+ clkm = to_clk_pll_mmc(hwp);
+ phase_id = (hw == &clkm->phase0_hw) ? 0 : 1;
+ val = DIV_ROUND_CLOSEST(degrees * 100, PHASE_SCALE_FACTOR);
+ ret = set_phsel(clkm, phase_id, val);
+ if (ret)
+ return ret;
+
+ usleep_range(10, 20);
+
+ return 0;
+}
+
+static int clk_pll_mmc_phase_get_phase(struct clk_hw *hw)
+{
+ struct clk_hw *hwp;
+ struct clk_pll_mmc *clkm;
+ int phase_id;
+ int ret;
+ u32 val;
+
+ hwp = clk_hw_get_parent(hw);
+ if (!hwp)
+ return -ENOENT;
+
+ clkm = to_clk_pll_mmc(hwp);
+ phase_id = (hw == &clkm->phase0_hw) ? 0 : 1;
+ ret = get_phsel(clkm, phase_id, &val);
+ if (ret)
+ return ret;
+
+ val = DIV_ROUND_CLOSEST(val * CYCLE_DEGREES, PHASE_STEPS);
+
+ return val;
+}
+
+const struct clk_ops rtk_clk_pll_mmc_phase_ops = {
+ .set_phase = clk_pll_mmc_phase_set_phase,
+ .get_phase = clk_pll_mmc_phase_get_phase,
+};
+EXPORT_SYMBOL_NS_GPL(rtk_clk_pll_mmc_phase_ops, "REALTEK_CLK");
+
+static int clk_pll_mmc_prepare(struct clk_hw *hw)
+{
+ struct clk_pll_mmc *clkm = to_clk_pll_mmc(hw);
+
+ return set_pow_ctl(clkm, 7);
+}
+
+static void clk_pll_mmc_unprepare(struct clk_hw *hw)
+{
+ struct clk_pll_mmc *clkm = to_clk_pll_mmc(hw);
+
+ set_pow_ctl(clkm, 0);
+}
+
+static int clk_pll_mmc_is_prepared(struct clk_hw *hw)
+{
+ struct clk_pll_mmc *clkm = to_clk_pll_mmc(hw);
+ u32 val;
+ int ret;
+
+ ret = get_pow_ctl(clkm, &val);
+ if (ret)
+ return 1;
+
+ return val != 0x0;
+}
+
+static int clk_pll_mmc_enable(struct clk_hw *hw)
+{
+ struct clk_pll_mmc *clkm = to_clk_pll_mmc(hw);
+ int ret;
+
+ ret = set_phrt0(clkm, 1);
+ if (ret)
+ return ret;
+
+ udelay(10);
+
+ return 0;
+}
+
+static void clk_pll_mmc_disable(struct clk_hw *hw)
+{
+ struct clk_pll_mmc *clkm = to_clk_pll_mmc(hw);
+
+ set_phrt0(clkm, 0);
+ udelay(10);
+}
+
+static int clk_pll_mmc_is_enabled(struct clk_hw *hw)
+{
+ struct clk_pll_mmc *clkm = to_clk_pll_mmc(hw);
+ u32 val;
+ int ret;
+
+ ret = get_phrt0(clkm, &val);
+ if (ret)
+ return 1;
+
+ return val == 0x1;
+}
+
+static unsigned long clk_pll_mmc_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ struct clk_pll_mmc *clkm = to_clk_pll_mmc(hw);
+ u32 val, ext_f;
+ u64 rate, base;
+ int ret;
+
+ ret = get_ssc_div_n(clkm, &val);
+ if (ret)
+ return 0;
+
+ ret = get_ssc_div_ext_f(clkm, &ext_f);
+ if (ret)
+ return 0;
+
+ base = parent_rate / 4;
+ rate = base * (val + 2);
+ rate += div_u64(base * ext_f, 8192);
+
+ return rate;
+}
+
+static int clk_pll_mmc_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
+{
+ u32 val;
+
+ if (!req->best_parent_rate)
+ return -EINVAL;
+
+ val = DIV_ROUND_CLOSEST_ULL((u64)req->rate * 4, req->best_parent_rate);
+ val = clamp_t(u32, val, PLL_MMC_VAL_MIN, PLL_MMC_VAL_MAX);
+ req->rate = req->best_parent_rate * val / 4;
+
+ return 0;
+}
+
+static int clk_pll_mmc_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate)
+{
+ struct clk_pll_mmc *clkm = to_clk_pll_mmc(hw);
+ u32 val = PLL_MMC_SSC_DIV_N_VAL;
+ int ret;
+
+ /*
+ * The 'rate' and 'parent_rate' are intentionally unused here.
+ *
+ * Despite receiving various rate requests (e.g., 26MHz, 52MHz, 200MHz),
+ * this function consistently configures the hardware for 27MHz (0x1b).
+ * This is because these settings reflect the input reference clock
+ * frequency to the SSCPLL, not the final PLL output frequency.
+ *
+ * The actual frequency division to achieve the requested eMMC rate
+ * is handled internally by the downstream eMMC host controller.
+ */
+
+ ret = regmap_update_bits(clkm->clkr.regmap,
+ clkm->ssc_dig_ofs + PLL_SSC_DIG_EMMC1_OFFSET,
+ PLL_FLAG_INITAL_EMMC_MASK, 0x0 << PLL_FLAG_INITAL_EMMC_SHIFT);
+ if (ret)
+ return ret;
+
+ ret = set_ssc_div_n(clkm, val);
+ if (ret)
+ return ret;
+
+ ret = set_ssc_div_ext_f(clkm, 1517);
+ if (ret)
+ return ret;
+
+ ret = set_pi_ibselh(clkm, 2);
+ if (ret)
+ return ret;
+
+ ret = set_sscpll_rs(clkm, 3);
+ if (ret)
+ return ret;
+
+ ret = set_sscpll_icp(clkm, 1);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(clkm->clkr.regmap,
+ clkm->ssc_dig_ofs + PLL_SSC_DIG_EMMC3_OFFSET,
+ PLL_NCODE_SSC_EMMC_MASK,
+ 27 << PLL_NCODE_SSC_EMMC_SHIFT);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(clkm->clkr.regmap,
+ clkm->ssc_dig_ofs + PLL_SSC_DIG_EMMC3_OFFSET,
+ PLL_FCODE_SSC_EMMC_MASK, 321);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(clkm->clkr.regmap,
+ clkm->ssc_dig_ofs + PLL_SSC_DIG_EMMC4_OFFSET,
+ PLL_GRAN_EST_EM_MC_MASK, 5985);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(clkm->clkr.regmap,
+ clkm->ssc_dig_ofs + PLL_SSC_DIG_EMMC1_OFFSET,
+ PLL_EN_SSC_EMMC_MASK, 0x1);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(clkm->clkr.regmap,
+ clkm->ssc_dig_ofs + PLL_SSC_DIG_EMMC1_OFFSET,
+ PLL_EN_SSC_EMMC_MASK, 0x0);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(clkm->clkr.regmap,
+ clkm->ssc_dig_ofs + PLL_SSC_DIG_EMMC1_OFFSET,
+ PLL_FLAG_INITAL_EMMC_MASK,
+ 0x1 << PLL_FLAG_INITAL_EMMC_SHIFT);
+ if (ret)
+ return ret;
+
+ usleep_range(10, 20);
+
+ return 0;
+}
+
+const struct clk_ops rtk_clk_pll_mmc_ops = {
+ .prepare = clk_pll_mmc_prepare,
+ .unprepare = clk_pll_mmc_unprepare,
+ .is_prepared = clk_pll_mmc_is_prepared,
+ .enable = clk_pll_mmc_enable,
+ .disable = clk_pll_mmc_disable,
+ .is_enabled = clk_pll_mmc_is_enabled,
+ .recalc_rate = clk_pll_mmc_recalc_rate,
+ .determine_rate = clk_pll_mmc_determine_rate,
+ .set_rate = clk_pll_mmc_set_rate,
+};
+EXPORT_SYMBOL_NS_GPL(rtk_clk_pll_mmc_ops, "REALTEK_CLK");
diff --git a/drivers/clk/realtek/clk-pll.h b/drivers/clk/realtek/clk-pll.h
index b70d6b3ec61e..ecc51898ae2d 100644
--- a/drivers/clk/realtek/clk-pll.h
+++ b/drivers/clk/realtek/clk-pll.h
@@ -44,4 +44,17 @@ struct clk_pll {
extern const struct clk_ops rtk_clk_pll_ops;
extern const struct clk_ops rtk_clk_pll_ro_ops;
+struct clk_pll_mmc {
+ struct clk_regmap clkr;
+ unsigned int pll_ofs;
+ unsigned int ssc_dig_ofs;
+ struct clk_hw phase0_hw;
+ struct clk_hw phase1_hw;
+};
+
+#define __clk_pll_mmc_hw(_ptr) __clk_regmap_hw(&(_ptr)->clkr)
+
+extern const struct clk_ops rtk_clk_pll_mmc_ops;
+extern const struct clk_ops rtk_clk_pll_mmc_phase_ops;
+
#endif /* __CLK_REALTEK_CLK_PLL_H */
--
2.43.0
^ permalink raw reply related
* [PATCH v9 03/12] reset: realtek: Add RTD1625-CRT reset driver
From: Yu-Chun Lin @ 2026-06-24 11:29 UTC (permalink / raw)
To: mturquette, sboyd, robh, krzk+dt, conor+dt, p.zabel, cylee12,
afaerber, jyanchou, bmasney
Cc: devicetree, linux-clk, linux-kernel, linux-arm-kernel,
linux-realtek-soc, james.tai, cy.huang, stanley_chang,
eleanor.lin
In-Reply-To: <20260624112940.3475605-1-eleanor.lin@realtek.com>
From: Cheng-Yu Lee <cylee12@realtek.com>
Add support for the CRT (Clock, Reset, and Test) domain reset controller on
the Realtek RTD1625 SoC.
The reset controller shares the same register space with the CRT clock
controller. To handle this shared register space, the reset driver is
implemented as an auxiliary driver. It will be instantiated and probed via
the auxiliary bus by the RTD1625-CRT clock controller driver.
Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
---
Changes in v9:
- Extract reset-related code from the previous clock driver patch
(formerly patch 8 in v8).
---
drivers/reset/realtek/Kconfig | 11 ++
drivers/reset/realtek/Makefile | 1 +
drivers/reset/realtek/reset-rtd1625-crt.c | 187 ++++++++++++++++++++++
3 files changed, 199 insertions(+)
create mode 100644 drivers/reset/realtek/reset-rtd1625-crt.c
diff --git a/drivers/reset/realtek/Kconfig b/drivers/reset/realtek/Kconfig
index bb6dd856a64a..b122e6334508 100644
--- a/drivers/reset/realtek/Kconfig
+++ b/drivers/reset/realtek/Kconfig
@@ -6,3 +6,14 @@ config RESET_RTK_COMMON
Realtek SoCs. It provides shared reset control operations
(assert, deassert, status) and a registration helper function
that other Realtek-specific reset drivers can use.
+
+config RESET_RTD1625
+ tristate "RTD1625 Reset Controller"
+ depends on ARCH_REALTEK || COMPILE_TEST
+ select RESET_RTK_COMMON
+ select AUXILIARY_BUS
+ help
+ This enables the reset controller driver for Realtek RTD1625 SoC.
+ The driver controls reset lines for various peripherals including
+ PCIe, SATA, HDMI, display, video encoder/decoder, USB, SD, audio,
+ and other subsystems.
diff --git a/drivers/reset/realtek/Makefile b/drivers/reset/realtek/Makefile
index 6d68e41748bf..c3f605ffb11c 100644
--- a/drivers/reset/realtek/Makefile
+++ b/drivers/reset/realtek/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_RESET_RTK_COMMON) += reset-rtk-common.o
+obj-$(CONFIG_RESET_RTD1625) += reset-rtd1625-crt.o
diff --git a/drivers/reset/realtek/reset-rtd1625-crt.c b/drivers/reset/realtek/reset-rtd1625-crt.c
new file mode 100644
index 000000000000..5c0508577141
--- /dev/null
+++ b/drivers/reset/realtek/reset-rtd1625-crt.c
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2026 Realtek Semiconductor Corporation
+ */
+
+#include <dt-bindings/reset/realtek,rtd1625.h>
+#include <linux/auxiliary_bus.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include "reset-rtk-common.h"
+
+#define RTD1625_CRT_RSTN_MAX 123
+
+static const struct rtk_reset_desc rtd1625_crt_reset_descs[] = {
+ /* Bank 0: offset 0x0 */
+ [RTD1625_CRT_RSTN_MISC] = { .ofs = 0x0, .bit = 0, .write_en = 1 },
+ [RTD1625_CRT_RSTN_DIP] = { .ofs = 0x0, .bit = 2, .write_en = 1 },
+ [RTD1625_CRT_RSTN_GSPI] = { .ofs = 0x0, .bit = 4, .write_en = 1 },
+ [RTD1625_CRT_RSTN_SDS] = { .ofs = 0x0, .bit = 6, .write_en = 1 },
+ [RTD1625_CRT_RSTN_SDS_REG] = { .ofs = 0x0, .bit = 8, .write_en = 1 },
+ [RTD1625_CRT_RSTN_SDS_PHY] = { .ofs = 0x0, .bit = 10, .write_en = 1 },
+ [RTD1625_CRT_RSTN_GPU2D] = { .ofs = 0x0, .bit = 12, .write_en = 1 },
+ [RTD1625_CRT_RSTN_DC_PHY] = { .ofs = 0x0, .bit = 22, .write_en = 1 },
+ [RTD1625_CRT_RSTN_DCPHY_CRT] = { .ofs = 0x0, .bit = 24, .write_en = 1 },
+ [RTD1625_CRT_RSTN_LSADC] = { .ofs = 0x0, .bit = 26, .write_en = 1 },
+ [RTD1625_CRT_RSTN_SE] = { .ofs = 0x0, .bit = 28, .write_en = 1 },
+ [RTD1625_CRT_RSTN_DLA] = { .ofs = 0x0, .bit = 30, .write_en = 1 },
+ /* Bank 1: offset 0x4 */
+ [RTD1625_CRT_RSTN_JPEG] = { .ofs = 0x4, .bit = 0, .write_en = 1 },
+ [RTD1625_CRT_RSTN_SD] = { .ofs = 0x4, .bit = 2, .write_en = 1 },
+ [RTD1625_CRT_RSTN_SDIO] = { .ofs = 0x4, .bit = 6, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCR_CNT] = { .ofs = 0x4, .bit = 8, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE0_STITCH] = { .ofs = 0x4, .bit = 10, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE0_PHY] = { .ofs = 0x4, .bit = 12, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE0] = { .ofs = 0x4, .bit = 14, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE0_CORE] = { .ofs = 0x4, .bit = 16, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE0_POWER] = { .ofs = 0x4, .bit = 18, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE0_NONSTICH] = { .ofs = 0x4, .bit = 20, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE0_PHY_MDIO] = { .ofs = 0x4, .bit = 22, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE0_SGMII_MDIO] = { .ofs = 0x4, .bit = 24, .write_en = 1 },
+ [RTD1625_CRT_RSTN_VO2] = { .ofs = 0x4, .bit = 28, .write_en = 1 },
+ [RTD1625_CRT_RSTN_MISC_SC0] = { .ofs = 0x4, .bit = 30, .write_en = 1 },
+ /* Bank 2: offset 0x8 */
+ [RTD1625_CRT_RSTN_MD] = { .ofs = 0x8, .bit = 4, .write_en = 1 },
+ [RTD1625_CRT_RSTN_LVDS1] = { .ofs = 0x8, .bit = 6, .write_en = 1 },
+ [RTD1625_CRT_RSTN_LVDS2] = { .ofs = 0x8, .bit = 8, .write_en = 1 },
+ [RTD1625_CRT_RSTN_MISC_SC1] = { .ofs = 0x8, .bit = 10, .write_en = 1 },
+ [RTD1625_CRT_RSTN_I2C_3] = { .ofs = 0x8, .bit = 12, .write_en = 1 },
+ [RTD1625_CRT_RSTN_FAN] = { .ofs = 0x8, .bit = 14, .write_en = 1 },
+ [RTD1625_CRT_RSTN_TVE] = { .ofs = 0x8, .bit = 16, .write_en = 1 },
+ [RTD1625_CRT_RSTN_AIO] = { .ofs = 0x8, .bit = 18, .write_en = 1 },
+ [RTD1625_CRT_RSTN_VO] = { .ofs = 0x8, .bit = 20, .write_en = 1 },
+ [RTD1625_CRT_RSTN_MIPI_CSI] = { .ofs = 0x8, .bit = 22, .write_en = 1 },
+ [RTD1625_CRT_RSTN_HDMIRX] = { .ofs = 0x8, .bit = 24, .write_en = 1 },
+ [RTD1625_CRT_RSTN_HDMIRX_WRAP] = { .ofs = 0x8, .bit = 26, .write_en = 1 },
+ [RTD1625_CRT_RSTN_HDMI] = { .ofs = 0x8, .bit = 28, .write_en = 1 },
+ [RTD1625_CRT_RSTN_DISP] = { .ofs = 0x8, .bit = 30, .write_en = 1 },
+ /* Bank 3: offset 0xc */
+ [RTD1625_CRT_RSTN_SATA_PHY_POW1] = { .ofs = 0xc, .bit = 0, .write_en = 1 },
+ [RTD1625_CRT_RSTN_SATA_PHY_POW0] = { .ofs = 0xc, .bit = 2, .write_en = 1 },
+ [RTD1625_CRT_RSTN_SATA_MDIO1] = { .ofs = 0xc, .bit = 4, .write_en = 1 },
+ [RTD1625_CRT_RSTN_SATA_MDIO0] = { .ofs = 0xc, .bit = 6, .write_en = 1 },
+ [RTD1625_CRT_RSTN_SATA_WRAP] = { .ofs = 0xc, .bit = 8, .write_en = 1 },
+ [RTD1625_CRT_RSTN_SATA_MAC_P1] = { .ofs = 0xc, .bit = 10, .write_en = 1 },
+ [RTD1625_CRT_RSTN_SATA_MAC_P0] = { .ofs = 0xc, .bit = 12, .write_en = 1 },
+ [RTD1625_CRT_RSTN_SATA_MAC_COM] = { .ofs = 0xc, .bit = 14, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE1_STITCH] = { .ofs = 0xc, .bit = 16, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE1_PHY] = { .ofs = 0xc, .bit = 18, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE1] = { .ofs = 0xc, .bit = 20, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE1_CORE] = { .ofs = 0xc, .bit = 22, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE1_POWER] = { .ofs = 0xc, .bit = 24, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE1_NONSTICH] = { .ofs = 0xc, .bit = 26, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE1_PHY_MDIO] = { .ofs = 0xc, .bit = 28, .write_en = 1 },
+ [RTD1625_CRT_RSTN_HDMITOP] = { .ofs = 0xc, .bit = 30, .write_en = 1 },
+ /* Bank 4: offset 0x68 */
+ [RTD1625_CRT_RSTN_I2C_4] = { .ofs = 0x68, .bit = 2, .write_en = 1 },
+ [RTD1625_CRT_RSTN_I2C_5] = { .ofs = 0x68, .bit = 4, .write_en = 1 },
+ [RTD1625_CRT_RSTN_TSIO] = { .ofs = 0x68, .bit = 6, .write_en = 1 },
+ [RTD1625_CRT_RSTN_VI] = { .ofs = 0x68, .bit = 8, .write_en = 1 },
+ [RTD1625_CRT_RSTN_EDP] = { .ofs = 0x68, .bit = 10, .write_en = 1 },
+ [RTD1625_CRT_RSTN_VE1_MMU] = { .ofs = 0x68, .bit = 12, .write_en = 1 },
+ [RTD1625_CRT_RSTN_VE1_MMU_FUNC] = { .ofs = 0x68, .bit = 14, .write_en = 1 },
+ [RTD1625_CRT_RSTN_HSE_MMU] = { .ofs = 0x68, .bit = 16, .write_en = 1 },
+ [RTD1625_CRT_RSTN_HSE_MMU_FUNC] = { .ofs = 0x68, .bit = 18, .write_en = 1 },
+ [RTD1625_CRT_RSTN_MDLM2M] = { .ofs = 0x68, .bit = 20, .write_en = 1 },
+ [RTD1625_CRT_RSTN_ISO_GSPI] = { .ofs = 0x68, .bit = 22, .write_en = 1 },
+ [RTD1625_CRT_RSTN_SOFT_NPU] = { .ofs = 0x68, .bit = 24, .write_en = 1 },
+ [RTD1625_CRT_RSTN_SPI2EMMC] = { .ofs = 0x68, .bit = 26, .write_en = 1 },
+ [RTD1625_CRT_RSTN_EARC] = { .ofs = 0x68, .bit = 28, .write_en = 1 },
+ [RTD1625_CRT_RSTN_VE1] = { .ofs = 0x68, .bit = 30, .write_en = 1 },
+ /* Bank 5: offset 0x90 */
+ [RTD1625_CRT_RSTN_PCIE2_STITCH] = { .ofs = 0x90, .bit = 0, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE2_PHY] = { .ofs = 0x90, .bit = 2, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE2] = { .ofs = 0x90, .bit = 4, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE2_CORE] = { .ofs = 0x90, .bit = 6, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE2_POWER] = { .ofs = 0x90, .bit = 8, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE2_NONSTICH] = { .ofs = 0x90, .bit = 10, .write_en = 1 },
+ [RTD1625_CRT_RSTN_PCIE2_PHY_MDIO] = { .ofs = 0x90, .bit = 12, .write_en = 1 },
+ [RTD1625_CRT_RSTN_DCPHY_UMCTL2] = { .ofs = 0x90, .bit = 14, .write_en = 1 },
+ [RTD1625_CRT_RSTN_MIPI_DSI] = { .ofs = 0x90, .bit = 16, .write_en = 1 },
+ [RTD1625_CRT_RSTN_HIFM] = { .ofs = 0x90, .bit = 18, .write_en = 1 },
+ [RTD1625_CRT_RSTN_NSRAM] = { .ofs = 0x90, .bit = 20, .write_en = 1 },
+ [RTD1625_CRT_RSTN_AUCPU0_REG] = { .ofs = 0x90, .bit = 22, .write_en = 1 },
+ [RTD1625_CRT_RSTN_MDL_GENPW] = { .ofs = 0x90, .bit = 24, .write_en = 1 },
+ [RTD1625_CRT_RSTN_MDL_CHIP] = { .ofs = 0x90, .bit = 26, .write_en = 1 },
+ [RTD1625_CRT_RSTN_MDL_IP] = { .ofs = 0x90, .bit = 28, .write_en = 1 },
+ [RTD1625_CRT_RSTN_TEST_MUX] = { .ofs = 0x90, .bit = 30, .write_en = 1 },
+ /* Bank 6: offset 0xb8 */
+ [RTD1625_CRT_RSTN_ISO_BIST] = { .ofs = 0xb8, .bit = 0, .write_en = 1 },
+ [RTD1625_CRT_RSTN_MAIN_BIST] = { .ofs = 0xb8, .bit = 2, .write_en = 1 },
+ [RTD1625_CRT_RSTN_MAIN2_BIST] = { .ofs = 0xb8, .bit = 4, .write_en = 1 },
+ [RTD1625_CRT_RSTN_VE1_BIST] = { .ofs = 0xb8, .bit = 6, .write_en = 1 },
+ [RTD1625_CRT_RSTN_VE2_BIST] = { .ofs = 0xb8, .bit = 8, .write_en = 1 },
+ [RTD1625_CRT_RSTN_DCPHY_BIST] = { .ofs = 0xb8, .bit = 10, .write_en = 1 },
+ [RTD1625_CRT_RSTN_GPU_BIST] = { .ofs = 0xb8, .bit = 12, .write_en = 1 },
+ [RTD1625_CRT_RSTN_DISP_BIST] = { .ofs = 0xb8, .bit = 14, .write_en = 1 },
+ [RTD1625_CRT_RSTN_NPU_BIST] = { .ofs = 0xb8, .bit = 16, .write_en = 1 },
+ [RTD1625_CRT_RSTN_CAS_BIST] = { .ofs = 0xb8, .bit = 18, .write_en = 1 },
+ [RTD1625_CRT_RSTN_VE4_BIST] = { .ofs = 0xb8, .bit = 20, .write_en = 1 },
+ /* Bank 7: offset 0x454 (DUMMY0, no write_en) */
+ [RTD1625_CRT_RSTN_EMMC] = { .ofs = 0x454, .bit = 0 },
+ /* Bank 8: offset 0x458 (DUMMY1, no write_en) */
+ [RTD1625_CRT_RSTN_GPU] = { .ofs = 0x458, .bit = 0 },
+ /* Bank 9: offset 0x464 (DUMMY4, no write_en) */
+ [RTD1625_CRT_RSTN_VE2] = { .ofs = 0x464, .bit = 0 },
+ /* Bank 10: offset 0x880 */
+ [RTD1625_CRT_RSTN_UR1] = { .ofs = 0x880, .bit = 0, .write_en = 1 },
+ [RTD1625_CRT_RSTN_UR2] = { .ofs = 0x880, .bit = 2, .write_en = 1 },
+ [RTD1625_CRT_RSTN_UR3] = { .ofs = 0x880, .bit = 4, .write_en = 1 },
+ [RTD1625_CRT_RSTN_UR4] = { .ofs = 0x880, .bit = 6, .write_en = 1 },
+ [RTD1625_CRT_RSTN_UR5] = { .ofs = 0x880, .bit = 8, .write_en = 1 },
+ [RTD1625_CRT_RSTN_UR6] = { .ofs = 0x880, .bit = 10, .write_en = 1 },
+ [RTD1625_CRT_RSTN_UR7] = { .ofs = 0x880, .bit = 12, .write_en = 1 },
+ [RTD1625_CRT_RSTN_UR8] = { .ofs = 0x880, .bit = 14, .write_en = 1 },
+ [RTD1625_CRT_RSTN_UR9] = { .ofs = 0x880, .bit = 16, .write_en = 1 },
+ [RTD1625_CRT_RSTN_UR_TOP] = { .ofs = 0x880, .bit = 18, .write_en = 1 },
+ [RTD1625_CRT_RSTN_I2C_7] = { .ofs = 0x880, .bit = 28, .write_en = 1 },
+ [RTD1625_CRT_RSTN_I2C_6] = { .ofs = 0x880, .bit = 30, .write_en = 1 },
+ /* Bank 11: offset 0x890 */
+ [RTD1625_CRT_RSTN_SPI0] = { .ofs = 0x890, .bit = 0, .write_en = 1 },
+ [RTD1625_CRT_RSTN_SPI1] = { .ofs = 0x890, .bit = 2, .write_en = 1 },
+ [RTD1625_CRT_RSTN_SPI2] = { .ofs = 0x890, .bit = 4, .write_en = 1 },
+ [RTD1625_CRT_RSTN_LSADC0] = { .ofs = 0x890, .bit = 16, .write_en = 1 },
+ [RTD1625_CRT_RSTN_LSADC1] = { .ofs = 0x890, .bit = 18, .write_en = 1 },
+ [RTD1625_CRT_RSTN_ISOMIS_DMA] = { .ofs = 0x890, .bit = 20, .write_en = 1 },
+ [RTD1625_CRT_RSTN_AUDIO_ADC] = { .ofs = 0x890, .bit = 22, .write_en = 1 },
+ [RTD1625_CRT_RSTN_DPTX] = { .ofs = 0x890, .bit = 24, .write_en = 1 },
+ [RTD1625_CRT_RSTN_AUCPU1_REG] = { .ofs = 0x890, .bit = 26, .write_en = 1 },
+ [RTD1625_CRT_RSTN_EDPTX] = { .ofs = 0x890, .bit = 28, .write_en = 1 },
+};
+
+static int rtd1625_crt_reset_probe(struct auxiliary_device *adev,
+ const struct auxiliary_device_id *id)
+{
+ struct device *dev = &adev->dev;
+ struct rtk_reset_data *data;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->descs = rtd1625_crt_reset_descs;
+ data->rcdev.nr_resets = RTD1625_CRT_RSTN_MAX;
+ data->rcdev.owner = THIS_MODULE;
+
+ return rtk_reset_controller_add(dev, data);
+}
+
+static const struct auxiliary_device_id rtd1625_crt_reset_ids[] = {
+ { .name = "clk_rtk.crt_rst" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(auxiliary, rtd1625_crt_reset_ids);
+
+static struct auxiliary_driver rtd1625_crt_driver = {
+ .probe = rtd1625_crt_reset_probe,
+ .id_table = rtd1625_crt_reset_ids,
+ .driver = {
+ .name = "rtd1625-crt-reset",
+ },
+};
+module_auxiliary_driver(rtd1625_crt_driver);
+
+MODULE_DESCRIPTION("Realtek RTD1625 CRT Reset Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("REALTEK_RESET");
--
2.43.0
^ permalink raw reply related
* [PATCH v9 01/12] dt-bindings: clock: Add Realtek RTD1625 Clock & Reset Controller
From: Yu-Chun Lin @ 2026-06-24 11:29 UTC (permalink / raw)
To: mturquette, sboyd, robh, krzk+dt, conor+dt, p.zabel, cylee12,
afaerber, jyanchou, bmasney
Cc: devicetree, linux-clk, linux-kernel, linux-arm-kernel,
linux-realtek-soc, james.tai, cy.huang, stanley_chang,
eleanor.lin, Krzysztof Kozlowski
In-Reply-To: <20260624112940.3475605-1-eleanor.lin@realtek.com>
Add DT binding schema for Realtek RTD1625 clock and reset controller
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Co-developed-by: Cheng-Yu Lee <cylee12@realtek.com>
Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
---
Changes in v8:
- None
---
.../bindings/clock/realtek,rtd1625-clk.yaml | 58 ++++++
MAINTAINERS | 10 +
.../dt-bindings/clock/realtek,rtd1625-clk.h | 164 +++++++++++++++++
include/dt-bindings/reset/realtek,rtd1625.h | 171 ++++++++++++++++++
4 files changed, 403 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/realtek,rtd1625-clk.yaml
create mode 100644 include/dt-bindings/clock/realtek,rtd1625-clk.h
create mode 100644 include/dt-bindings/reset/realtek,rtd1625.h
diff --git a/Documentation/devicetree/bindings/clock/realtek,rtd1625-clk.yaml b/Documentation/devicetree/bindings/clock/realtek,rtd1625-clk.yaml
new file mode 100644
index 000000000000..1aceef31e148
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/realtek,rtd1625-clk.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/realtek,rtd1625-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTD1625 Clock & Reset Controller
+
+maintainers:
+ - Cheng-Yu Lee <cylee12@realtek.com>
+ - Yu-Chun Lin <eleanor.lin@realtek.com>
+
+description: |
+ The Realtek RTD1625 Clock Controller manages and distributes clock
+ signals to various controllers and implements a Reset Controller for the
+ SoC peripherals.
+
+ Clocks and resets are referenced by unique identifiers, which are defined as
+ preprocessor macros in include/dt-bindings/clock/realtek,rtd1625-clk.h and
+ include/dt-bindings/reset/realtek,rtd1625.h.
+
+properties:
+ compatible:
+ enum:
+ - realtek,rtd1625-crt-clk
+ - realtek,rtd1625-iso-clk
+ - realtek,rtd1625-iso-s-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - "#clock-cells"
+ - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@98000000 {
+ compatible = "realtek,rtd1625-crt-clk";
+ reg = <0x98000000 0x1000>;
+ clocks = <&osc27m>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index ba45953bb805..d9df9b120e55 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -22668,6 +22668,16 @@ S: Maintained
F: Documentation/devicetree/bindings/net/dsa/realtek.yaml
F: drivers/net/dsa/realtek/*
+REALTEK SOC CLOCK AND RESET DRIVERS
+M: Cheng-Yu Lee <cylee12@realtek.com>
+M: Yu-Chun Lin <eleanor.lin@realtek.com>
+L: devicetree@vger.kernel.org
+L: linux-clk@vger.kernel.org
+S: Supported
+F: Documentation/devicetree/bindings/clock/realtek*
+F: include/dt-bindings/clock/realtek*
+F: include/dt-bindings/reset/realtek*
+
REALTEK SPI-NAND
M: Chris Packham <chris.packham@alliedtelesis.co.nz>
S: Maintained
diff --git a/include/dt-bindings/clock/realtek,rtd1625-clk.h b/include/dt-bindings/clock/realtek,rtd1625-clk.h
new file mode 100644
index 000000000000..61ca652d6880
--- /dev/null
+++ b/include/dt-bindings/clock/realtek,rtd1625-clk.h
@@ -0,0 +1,164 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2025 Realtek Semiconductor Corp.
+ */
+#ifndef __DT_BINDINGS_RTK_CLOCK_RTD1625_H
+#define __DT_BINDINGS_RTK_CLOCK_RTD1625_H
+
+#define RTD1625_CRT_CLK_EN_MISC 0
+#define RTD1625_CRT_CLK_EN_PCIE0 1
+#define RTD1625_CRT_CLK_EN_DIP 2
+#define RTD1625_CRT_CLK_EN_GSPI 3
+#define RTD1625_CRT_CLK_EN_ISO_MISC 5
+#define RTD1625_CRT_CLK_EN_SDS 6
+#define RTD1625_CRT_CLK_EN_HDMI 7
+#define RTD1625_CRT_CLK_EN_GPU 9
+#define RTD1625_CRT_CLK_EN_VE1 10
+#define RTD1625_CRT_CLK_EN_VE2 11
+#define RTD1625_CRT_CLK_EN_MD 18
+#define RTD1625_CRT_CLK_EN_TP 19
+#define RTD1625_CRT_CLK_EN_RCIC 20
+#define RTD1625_CRT_CLK_EN_NF 21
+#define RTD1625_CRT_CLK_EN_EMMC 22
+#define RTD1625_CRT_CLK_EN_SD 23
+#define RTD1625_CRT_CLK_EN_SDIO_IP 24
+#define RTD1625_CRT_CLK_EN_MIPI_CSI 25
+#define RTD1625_CRT_CLK_EN_EMMC_IP 26
+#define RTD1625_CRT_CLK_EN_SDIO 27
+#define RTD1625_CRT_CLK_EN_SD_IP 28
+#define RTD1625_CRT_CLK_EN_TPB 30
+#define RTD1625_CRT_CLK_EN_MISC_SC1 31
+#define RTD1625_CRT_CLK_EN_MISC_I2C_3 32
+#define RTD1625_CRT_CLK_EN_ACPU 33
+#define RTD1625_CRT_CLK_EN_JPEG 34
+#define RTD1625_CRT_CLK_EN_MISC_SC0 37
+#define RTD1625_CRT_CLK_EN_HDMIRX 45
+#define RTD1625_CRT_CLK_EN_HSE 46
+#define RTD1625_CRT_CLK_EN_FAN 49
+#define RTD1625_CRT_CLK_EN_SATA_WRAP_SYS 52
+#define RTD1625_CRT_CLK_EN_SATA_WRAP_SYSH 53
+#define RTD1625_CRT_CLK_EN_SATA_MAC_SYSH 54
+#define RTD1625_CRT_CLK_EN_R2RDSC 55
+#define RTD1625_CRT_CLK_EN_TPC 56
+#define RTD1625_CRT_CLK_EN_PCIE1 57
+#define RTD1625_CRT_CLK_EN_MISC_I2C_4 58
+#define RTD1625_CRT_CLK_EN_MISC_I2C_5 59
+#define RTD1625_CRT_CLK_EN_TSIO 60
+#define RTD1625_CRT_CLK_EN_VE4 61
+#define RTD1625_CRT_CLK_EN_EDP 62
+#define RTD1625_CRT_CLK_EN_TSIO_TRX 63
+#define RTD1625_CRT_CLK_EN_PCIE2 64
+#define RTD1625_CRT_CLK_EN_EARC 66
+#define RTD1625_CRT_CLK_EN_LITE 67
+#define RTD1625_CRT_CLK_EN_MIPI_DSI 68
+#define RTD1625_CRT_CLK_EN_NPUPP 69
+#define RTD1625_CRT_CLK_EN_NPU 70
+#define RTD1625_CRT_CLK_EN_AUCPU0 71
+#define RTD1625_CRT_CLK_EN_AUCPU1 72
+#define RTD1625_CRT_CLK_EN_NSRAM 73
+#define RTD1625_CRT_CLK_EN_HDMITOP 74
+#define RTD1625_CRT_CLK_EN_AUCPU_ISO_NPU 76
+#define RTD1625_CRT_CLK_EN_KEYLADDER 77
+#define RTD1625_CRT_CLK_EN_IFCP_KLM 78
+#define RTD1625_CRT_CLK_EN_IFCP 79
+#define RTD1625_CRT_CLK_EN_MDL_GENPW 80
+#define RTD1625_CRT_CLK_EN_MDL_CHIP 81
+#define RTD1625_CRT_CLK_EN_MDL_IP 82
+#define RTD1625_CRT_CLK_EN_MDLM2M 83
+#define RTD1625_CRT_CLK_EN_MDL_XTAL 84
+#define RTD1625_CRT_CLK_EN_TEST_MUX 85
+#define RTD1625_CRT_CLK_EN_DLA 86
+#define RTD1625_CRT_CLK_EN_TPCW 88
+#define RTD1625_CRT_CLK_EN_GPU_TS_SRC 89
+#define RTD1625_CRT_CLK_EN_VI 91
+#define RTD1625_CRT_CLK_EN_LVDS1 92
+#define RTD1625_CRT_CLK_EN_LVDS2 93
+#define RTD1625_CRT_CLK_EN_AUCPU 94
+#define RTD1625_CRT_CLK_EN_UR1 96
+#define RTD1625_CRT_CLK_EN_UR2 97
+#define RTD1625_CRT_CLK_EN_UR3 98
+#define RTD1625_CRT_CLK_EN_UR4 99
+#define RTD1625_CRT_CLK_EN_UR5 100
+#define RTD1625_CRT_CLK_EN_UR6 101
+#define RTD1625_CRT_CLK_EN_UR7 102
+#define RTD1625_CRT_CLK_EN_UR8 103
+#define RTD1625_CRT_CLK_EN_UR9 104
+#define RTD1625_CRT_CLK_EN_UR_TOP 105
+#define RTD1625_CRT_CLK_EN_MISC_I2C_7 110
+#define RTD1625_CRT_CLK_EN_MISC_I2C_6 111
+#define RTD1625_CRT_CLK_EN_SPI0 112
+#define RTD1625_CRT_CLK_EN_SPI1 113
+#define RTD1625_CRT_CLK_EN_SPI2 114
+#define RTD1625_CRT_CLK_EN_LSADC0 120
+#define RTD1625_CRT_CLK_EN_LSADC1 121
+#define RTD1625_CRT_CLK_EN_ISOMIS_DMA 122
+#define RTD1625_CRT_CLK_EN_DPTX 124
+#define RTD1625_CRT_CLK_EN_NPU_MIPI_CSI 125
+#define RTD1625_CRT_CLK_EN_EDPTX 126
+#define RTD1625_CRT_CLK_HIFI 128
+#define RTD1625_CRT_CLK_NPU_MIPI_CSI 129
+#define RTD1625_CRT_CLK_NPU 130
+#define RTD1625_CRT_CLK_NPU_SYSH 132
+#define RTD1625_CRT_CLK_HIFI_SCPU 133
+#define RTD1625_CRT_CLK_GPU 134
+#define RTD1625_CRT_CLK_GPU2D 135
+#define RTD1625_CRT_CLK_MIPI_DSI_PCLK 136
+#define RTD1625_CRT_CLK_VE1 137
+#define RTD1625_CRT_CLK_VE2 138
+#define RTD1625_CRT_CLK_VE4 139
+#define RTD1625_CRT_CLK_SYS 141
+#define RTD1625_CRT_CLK_SYSH 142
+#define RTD1625_CRT_PLL_SDIO_REF 145
+#define RTD1625_CRT_PLL_CR_REF 146
+#define RTD1625_CRT_PLL_EMMC_REF 147
+#define RTD1625_CRT_CLK_MIS_SC0 148
+#define RTD1625_CRT_CLK_MIS_SC1 149
+#define RTD1625_CRT_PLL_SCPU 150
+#define RTD1625_CRT_PLL_VE1 151
+#define RTD1625_CRT_PLL_DDSA 152
+#define RTD1625_CRT_PLL_PSAUDA1 153
+#define RTD1625_CRT_PLL_PSAUDA2 154
+#define RTD1625_CRT_PLL_BUS 155
+#define RTD1625_CRT_PLL_SDIO 156
+#define RTD1625_CRT_PLL_SDIO_VP0 157
+#define RTD1625_CRT_PLL_SDIO_VP1 158
+#define RTD1625_CRT_PLL_DCSB 159
+#define RTD1625_CRT_PLL_GPU 160
+#define RTD1625_CRT_PLL_NPU 161
+#define RTD1625_CRT_PLL_VE2 162
+#define RTD1625_CRT_PLL_HIFI 163
+#define RTD1625_CRT_PLL_SD 164
+#define RTD1625_CRT_PLL_SD_VP0 165
+#define RTD1625_CRT_PLL_SD_VP1 166
+#define RTD1625_CRT_PLL_EMMC 167
+#define RTD1625_CRT_PLL_EMMC_VP0 168
+#define RTD1625_CRT_PLL_EMMC_VP1 169
+#define RTD1625_CRT_PLL_ACPU 170
+#define RTD1625_CRT_CLK_DET 171
+
+#define RTD1625_ISO_CLK_EN_USB_P4 0
+#define RTD1625_ISO_CLK_EN_USB_P3 1
+#define RTD1625_ISO_CLK_EN_MISC_CEC0 2
+#define RTD1625_ISO_CLK_EN_CBUSRX_SYS 3
+#define RTD1625_ISO_CLK_EN_CBUSTX_SYS 4
+#define RTD1625_ISO_CLK_EN_CBUS_SYS 5
+#define RTD1625_ISO_CLK_EN_CBUS_OSC 6
+#define RTD1625_ISO_CLK_EN_MISC_UR0 8
+#define RTD1625_ISO_CLK_EN_I2C0 9
+#define RTD1625_ISO_CLK_EN_I2C1 10
+#define RTD1625_ISO_CLK_EN_ETN_250M 11
+#define RTD1625_ISO_CLK_EN_ETN_SYS 12
+#define RTD1625_ISO_CLK_EN_USB_DRD 13
+#define RTD1625_ISO_CLK_EN_USB_HOST 14
+#define RTD1625_ISO_CLK_EN_USB_U3_HOST 15
+#define RTD1625_ISO_CLK_EN_USB 16
+#define RTD1625_ISO_CLK_EN_VTC 17
+#define RTD1625_ISO_CLK_EN_MISC_VFD 18
+
+#define RTD1625_ISO_S_CLK_EN_ISOM_MIS 0
+#define RTD1625_ISO_S_CLK_EN_ISOM_GPIOM 1
+#define RTD1625_ISO_S_CLK_EN_TIMER7 2
+#define RTD1625_ISO_S_CLK_EN_IRDA 3
+#define RTD1625_ISO_S_CLK_EN_UR10 4
+
+#endif /* __DT_BINDINGS_RTK_CLOCK_RTD1625_H */
diff --git a/include/dt-bindings/reset/realtek,rtd1625.h b/include/dt-bindings/reset/realtek,rtd1625.h
new file mode 100644
index 000000000000..31e7fa66ef31
--- /dev/null
+++ b/include/dt-bindings/reset/realtek,rtd1625.h
@@ -0,0 +1,171 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2025 Realtek Semiconductor Corp.
+ */
+
+#ifndef __DT_BINDINGS_RTK_RESET_RTD1625_H
+#define __DT_BINDINGS_RTK_RESET_RTD1625_H
+
+#define RTD1625_CRT_RSTN_MISC 0
+#define RTD1625_CRT_RSTN_DIP 1
+#define RTD1625_CRT_RSTN_GSPI 2
+#define RTD1625_CRT_RSTN_SDS 3
+#define RTD1625_CRT_RSTN_SDS_REG 4
+#define RTD1625_CRT_RSTN_SDS_PHY 5
+#define RTD1625_CRT_RSTN_GPU2D 6
+#define RTD1625_CRT_RSTN_DC_PHY 7
+#define RTD1625_CRT_RSTN_DCPHY_CRT 8
+#define RTD1625_CRT_RSTN_LSADC 9
+#define RTD1625_CRT_RSTN_SE 10
+#define RTD1625_CRT_RSTN_DLA 11
+#define RTD1625_CRT_RSTN_JPEG 12
+#define RTD1625_CRT_RSTN_SD 13
+#define RTD1625_CRT_RSTN_SDIO 14
+#define RTD1625_CRT_RSTN_PCR_CNT 15
+#define RTD1625_CRT_RSTN_PCIE0_STITCH 16
+#define RTD1625_CRT_RSTN_PCIE0_PHY 17
+#define RTD1625_CRT_RSTN_PCIE0 18
+#define RTD1625_CRT_RSTN_PCIE0_CORE 19
+#define RTD1625_CRT_RSTN_PCIE0_POWER 20
+#define RTD1625_CRT_RSTN_PCIE0_NONSTICH 21
+#define RTD1625_CRT_RSTN_PCIE0_PHY_MDIO 22
+#define RTD1625_CRT_RSTN_PCIE0_SGMII_MDIO 23
+#define RTD1625_CRT_RSTN_VO2 24
+#define RTD1625_CRT_RSTN_MISC_SC0 25
+#define RTD1625_CRT_RSTN_MD 26
+#define RTD1625_CRT_RSTN_LVDS1 27
+#define RTD1625_CRT_RSTN_LVDS2 28
+#define RTD1625_CRT_RSTN_MISC_SC1 29
+#define RTD1625_CRT_RSTN_I2C_3 30
+#define RTD1625_CRT_RSTN_FAN 31
+#define RTD1625_CRT_RSTN_TVE 32
+#define RTD1625_CRT_RSTN_AIO 33
+#define RTD1625_CRT_RSTN_VO 34
+#define RTD1625_CRT_RSTN_MIPI_CSI 35
+#define RTD1625_CRT_RSTN_HDMIRX 36
+#define RTD1625_CRT_RSTN_HDMIRX_WRAP 37
+#define RTD1625_CRT_RSTN_HDMI 38
+#define RTD1625_CRT_RSTN_DISP 39
+#define RTD1625_CRT_RSTN_SATA_PHY_POW1 40
+#define RTD1625_CRT_RSTN_SATA_PHY_POW0 41
+#define RTD1625_CRT_RSTN_SATA_MDIO1 42
+#define RTD1625_CRT_RSTN_SATA_MDIO0 43
+#define RTD1625_CRT_RSTN_SATA_WRAP 44
+#define RTD1625_CRT_RSTN_SATA_MAC_P1 45
+#define RTD1625_CRT_RSTN_SATA_MAC_P0 46
+#define RTD1625_CRT_RSTN_SATA_MAC_COM 47
+#define RTD1625_CRT_RSTN_PCIE1_STITCH 48
+#define RTD1625_CRT_RSTN_PCIE1_PHY 49
+#define RTD1625_CRT_RSTN_PCIE1 50
+#define RTD1625_CRT_RSTN_PCIE1_CORE 51
+#define RTD1625_CRT_RSTN_PCIE1_POWER 52
+#define RTD1625_CRT_RSTN_PCIE1_NONSTICH 53
+#define RTD1625_CRT_RSTN_PCIE1_PHY_MDIO 54
+#define RTD1625_CRT_RSTN_HDMITOP 55
+#define RTD1625_CRT_RSTN_I2C_4 56
+#define RTD1625_CRT_RSTN_I2C_5 57
+#define RTD1625_CRT_RSTN_TSIO 58
+#define RTD1625_CRT_RSTN_VI 59
+#define RTD1625_CRT_RSTN_EDP 60
+#define RTD1625_CRT_RSTN_VE1_MMU 61
+#define RTD1625_CRT_RSTN_VE1_MMU_FUNC 62
+#define RTD1625_CRT_RSTN_HSE_MMU 63
+#define RTD1625_CRT_RSTN_HSE_MMU_FUNC 64
+#define RTD1625_CRT_RSTN_MDLM2M 65
+#define RTD1625_CRT_RSTN_ISO_GSPI 66
+#define RTD1625_CRT_RSTN_SOFT_NPU 67
+#define RTD1625_CRT_RSTN_SPI2EMMC 68
+#define RTD1625_CRT_RSTN_EARC 69
+#define RTD1625_CRT_RSTN_VE1 70
+#define RTD1625_CRT_RSTN_PCIE2_STITCH 71
+#define RTD1625_CRT_RSTN_PCIE2_PHY 72
+#define RTD1625_CRT_RSTN_PCIE2 73
+#define RTD1625_CRT_RSTN_PCIE2_CORE 74
+#define RTD1625_CRT_RSTN_PCIE2_POWER 75
+#define RTD1625_CRT_RSTN_PCIE2_NONSTICH 76
+#define RTD1625_CRT_RSTN_PCIE2_PHY_MDIO 77
+#define RTD1625_CRT_RSTN_DCPHY_UMCTL2 78
+#define RTD1625_CRT_RSTN_MIPI_DSI 79
+#define RTD1625_CRT_RSTN_HIFM 80
+#define RTD1625_CRT_RSTN_NSRAM 81
+#define RTD1625_CRT_RSTN_AUCPU0_REG 82
+#define RTD1625_CRT_RSTN_MDL_GENPW 83
+#define RTD1625_CRT_RSTN_MDL_CHIP 84
+#define RTD1625_CRT_RSTN_MDL_IP 85
+#define RTD1625_CRT_RSTN_TEST_MUX 86
+#define RTD1625_CRT_RSTN_ISO_BIST 87
+#define RTD1625_CRT_RSTN_MAIN_BIST 88
+#define RTD1625_CRT_RSTN_MAIN2_BIST 89
+#define RTD1625_CRT_RSTN_VE1_BIST 90
+#define RTD1625_CRT_RSTN_VE2_BIST 91
+#define RTD1625_CRT_RSTN_DCPHY_BIST 92
+#define RTD1625_CRT_RSTN_GPU_BIST 93
+#define RTD1625_CRT_RSTN_DISP_BIST 94
+#define RTD1625_CRT_RSTN_NPU_BIST 95
+#define RTD1625_CRT_RSTN_CAS_BIST 96
+#define RTD1625_CRT_RSTN_VE4_BIST 97
+#define RTD1625_CRT_RSTN_EMMC 98
+#define RTD1625_CRT_RSTN_GPU 99
+#define RTD1625_CRT_RSTN_VE2 100
+#define RTD1625_CRT_RSTN_UR1 101
+#define RTD1625_CRT_RSTN_UR2 102
+#define RTD1625_CRT_RSTN_UR3 103
+#define RTD1625_CRT_RSTN_UR4 104
+#define RTD1625_CRT_RSTN_UR5 105
+#define RTD1625_CRT_RSTN_UR6 106
+#define RTD1625_CRT_RSTN_UR7 107
+#define RTD1625_CRT_RSTN_UR8 108
+#define RTD1625_CRT_RSTN_UR9 109
+#define RTD1625_CRT_RSTN_UR_TOP 110
+#define RTD1625_CRT_RSTN_I2C_7 111
+#define RTD1625_CRT_RSTN_I2C_6 112
+#define RTD1625_CRT_RSTN_SPI0 113
+#define RTD1625_CRT_RSTN_SPI1 114
+#define RTD1625_CRT_RSTN_SPI2 115
+#define RTD1625_CRT_RSTN_LSADC0 116
+#define RTD1625_CRT_RSTN_LSADC1 117
+#define RTD1625_CRT_RSTN_ISOMIS_DMA 118
+#define RTD1625_CRT_RSTN_AUDIO_ADC 119
+#define RTD1625_CRT_RSTN_DPTX 120
+#define RTD1625_CRT_RSTN_AUCPU1_REG 121
+#define RTD1625_CRT_RSTN_EDPTX 122
+
+/* ISO reset */
+#define RTD1625_ISO_RSTN_VFD 0
+#define RTD1625_ISO_RSTN_CEC0 1
+#define RTD1625_ISO_RSTN_CEC1 2
+#define RTD1625_ISO_RSTN_CBUSTX 3
+#define RTD1625_ISO_RSTN_CBUSRX 4
+#define RTD1625_ISO_RSTN_USB3_PHY2_XTAL_POW 5
+#define RTD1625_ISO_RSTN_UR0 6
+#define RTD1625_ISO_RSTN_GMAC 7
+#define RTD1625_ISO_RSTN_GPHY 8
+#define RTD1625_ISO_RSTN_I2C_0 9
+#define RTD1625_ISO_RSTN_I2C_1 10
+#define RTD1625_ISO_RSTN_CBUS 11
+#define RTD1625_ISO_RSTN_USB_DRD 12
+#define RTD1625_ISO_RSTN_USB_HOST 13
+#define RTD1625_ISO_RSTN_USB_PHY_0 14
+#define RTD1625_ISO_RSTN_USB_PHY_1 15
+#define RTD1625_ISO_RSTN_USB_PHY_2 16
+#define RTD1625_ISO_RSTN_USB 17
+#define RTD1625_ISO_RSTN_TYPE_C 18
+#define RTD1625_ISO_RSTN_USB_U3_HOST 19
+#define RTD1625_ISO_RSTN_USB3_PHY0_POW 20
+#define RTD1625_ISO_RSTN_USB3_P0_MDIO 21
+#define RTD1625_ISO_RSTN_USB3_PHY1_POW 22
+#define RTD1625_ISO_RSTN_USB3_P1_MDIO 23
+#define RTD1625_ISO_RSTN_VTC 24
+#define RTD1625_ISO_RSTN_USB3_PHY2_POW 25
+#define RTD1625_ISO_RSTN_USB3_P2_MDIO 26
+#define RTD1625_ISO_RSTN_USB_PHY_3 27
+#define RTD1625_ISO_RSTN_USB_PHY_4 28
+
+/* ISO_S reset */
+#define RTD1625_ISO_S_RSTN_ISOM_MIS 0
+#define RTD1625_ISO_S_RSTN_GPIOM 1
+#define RTD1625_ISO_S_RSTN_TIMER7 2
+#define RTD1625_ISO_S_RSTN_IRDA 3
+#define RTD1625_ISO_S_RSTN_UR10 4
+
+#endif /* __DT_BINDINGS_RTK_RESET_RTD1625_H */
--
2.43.0
^ permalink raw reply related
* [PATCH v9 04/12] reset: realtek: Add RTD1625-ISO reset controller driver
From: Yu-Chun Lin @ 2026-06-24 11:29 UTC (permalink / raw)
To: mturquette, sboyd, robh, krzk+dt, conor+dt, p.zabel, cylee12,
afaerber, jyanchou, bmasney
Cc: devicetree, linux-clk, linux-kernel, linux-arm-kernel,
linux-realtek-soc, james.tai, cy.huang, stanley_chang,
eleanor.lin
In-Reply-To: <20260624112940.3475605-1-eleanor.lin@realtek.com>
From: Cheng-Yu Lee <cylee12@realtek.com>
Add support for the ISO (Isolation) domain reset controller on the Realtek
RTD1625 SoC.
The reset controller shares the same register space with the ISO clock
controller. To handle this shared register space, the reset driver is
implemented as an auxiliary driver. It will be instantiated and probed via
the auxiliary bus by the RTD1625-ISO clock controller driver.
Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
---
Changes in v9:
- Extract reset-related code from the previous clock driver patch
(formerly patch 9 in v8).
---
drivers/reset/realtek/Makefile | 2 +-
drivers/reset/realtek/reset-rtd1625-iso.c | 99 +++++++++++++++++++++++
2 files changed, 100 insertions(+), 1 deletion(-)
create mode 100644 drivers/reset/realtek/reset-rtd1625-iso.c
diff --git a/drivers/reset/realtek/Makefile b/drivers/reset/realtek/Makefile
index c3f605ffb11c..9007c9d5683b 100644
--- a/drivers/reset/realtek/Makefile
+++ b/drivers/reset/realtek/Makefile
@@ -1,3 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_RESET_RTK_COMMON) += reset-rtk-common.o
-obj-$(CONFIG_RESET_RTD1625) += reset-rtd1625-crt.o
+obj-$(CONFIG_RESET_RTD1625) += reset-rtd1625-crt.o reset-rtd1625-iso.o
diff --git a/drivers/reset/realtek/reset-rtd1625-iso.c b/drivers/reset/realtek/reset-rtd1625-iso.c
new file mode 100644
index 000000000000..78eaabb408f0
--- /dev/null
+++ b/drivers/reset/realtek/reset-rtd1625-iso.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2026 Realtek Semiconductor Corporation
+ */
+
+#include <dt-bindings/reset/realtek,rtd1625.h>
+#include <linux/auxiliary_bus.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include "reset-rtk-common.h"
+
+#define RTD1625_ISO_RSTN_MAX 29
+#define RTD1625_ISO_S_RSTN_MAX 5
+
+static const struct rtk_reset_desc rtd1625_iso_reset_descs[] = {
+ [RTD1625_ISO_RSTN_VFD] = { .ofs = 0x88, .bit = 0 },
+ [RTD1625_ISO_RSTN_CEC0] = { .ofs = 0x88, .bit = 2 },
+ [RTD1625_ISO_RSTN_CEC1] = { .ofs = 0x88, .bit = 3 },
+ [RTD1625_ISO_RSTN_CBUSTX] = { .ofs = 0x88, .bit = 5 },
+ [RTD1625_ISO_RSTN_CBUSRX] = { .ofs = 0x88, .bit = 6 },
+ [RTD1625_ISO_RSTN_USB3_PHY2_XTAL_POW] = { .ofs = 0x88, .bit = 7 },
+ [RTD1625_ISO_RSTN_UR0] = { .ofs = 0x88, .bit = 8 },
+ [RTD1625_ISO_RSTN_GMAC] = { .ofs = 0x88, .bit = 9 },
+ [RTD1625_ISO_RSTN_GPHY] = { .ofs = 0x88, .bit = 10 },
+ [RTD1625_ISO_RSTN_I2C_0] = { .ofs = 0x88, .bit = 11 },
+ [RTD1625_ISO_RSTN_I2C_1] = { .ofs = 0x88, .bit = 12 },
+ [RTD1625_ISO_RSTN_CBUS] = { .ofs = 0x88, .bit = 13 },
+ [RTD1625_ISO_RSTN_USB_DRD] = { .ofs = 0x88, .bit = 14 },
+ [RTD1625_ISO_RSTN_USB_HOST] = { .ofs = 0x88, .bit = 15 },
+ [RTD1625_ISO_RSTN_USB_PHY_0] = { .ofs = 0x88, .bit = 16 },
+ [RTD1625_ISO_RSTN_USB_PHY_1] = { .ofs = 0x88, .bit = 17 },
+ [RTD1625_ISO_RSTN_USB_PHY_2] = { .ofs = 0x88, .bit = 18 },
+ [RTD1625_ISO_RSTN_USB] = { .ofs = 0x88, .bit = 19 },
+ [RTD1625_ISO_RSTN_TYPE_C] = { .ofs = 0x88, .bit = 20 },
+ [RTD1625_ISO_RSTN_USB_U3_HOST] = { .ofs = 0x88, .bit = 21 },
+ [RTD1625_ISO_RSTN_USB3_PHY0_POW] = { .ofs = 0x88, .bit = 22 },
+ [RTD1625_ISO_RSTN_USB3_P0_MDIO] = { .ofs = 0x88, .bit = 23 },
+ [RTD1625_ISO_RSTN_USB3_PHY1_POW] = { .ofs = 0x88, .bit = 24 },
+ [RTD1625_ISO_RSTN_USB3_P1_MDIO] = { .ofs = 0x88, .bit = 25 },
+ [RTD1625_ISO_RSTN_VTC] = { .ofs = 0x88, .bit = 26 },
+ [RTD1625_ISO_RSTN_USB3_PHY2_POW] = { .ofs = 0x88, .bit = 27 },
+ [RTD1625_ISO_RSTN_USB3_P2_MDIO] = { .ofs = 0x88, .bit = 28 },
+ [RTD1625_ISO_RSTN_USB_PHY_3] = { .ofs = 0x88, .bit = 29 },
+ [RTD1625_ISO_RSTN_USB_PHY_4] = { .ofs = 0x88, .bit = 30 },
+};
+
+static const struct rtk_reset_desc rtd1625_iso_s_reset_descs[] = {
+ [RTD1625_ISO_S_RSTN_ISOM_MIS] = { .ofs = 0x310, .bit = 0, .write_en = 1 },
+ [RTD1625_ISO_S_RSTN_GPIOM] = { .ofs = 0x310, .bit = 2, .write_en = 1 },
+ [RTD1625_ISO_S_RSTN_TIMER7] = { .ofs = 0x310, .bit = 4, .write_en = 1 },
+ [RTD1625_ISO_S_RSTN_IRDA] = { .ofs = 0x310, .bit = 6, .write_en = 1 },
+ [RTD1625_ISO_S_RSTN_UR10] = { .ofs = 0x310, .bit = 8, .write_en = 1 },
+};
+
+static int rtd1625_iso_reset_probe(struct auxiliary_device *adev,
+ const struct auxiliary_device_id *id)
+{
+ struct device *dev = &adev->dev;
+ struct device *parent = dev->parent;
+ struct rtk_reset_data *data;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ if (of_device_is_compatible(parent->of_node, "realtek,rtd1625-iso-s-clk")) {
+ data->descs = rtd1625_iso_s_reset_descs;
+ data->rcdev.nr_resets = RTD1625_ISO_S_RSTN_MAX;
+ } else {
+ data->descs = rtd1625_iso_reset_descs;
+ data->rcdev.nr_resets = RTD1625_ISO_RSTN_MAX;
+ }
+
+ data->rcdev.owner = THIS_MODULE;
+
+ return rtk_reset_controller_add(dev, data);
+}
+
+static const struct auxiliary_device_id rtd1625_iso_reset_ids[] = {
+ { .name = "clk_rtk.iso_rst" },
+ { .name = "clk_rtk.iso_s_rst" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(auxiliary, rtd1625_iso_reset_ids);
+
+static struct auxiliary_driver rtd1625_iso_driver = {
+ .probe = rtd1625_iso_reset_probe,
+ .id_table = rtd1625_iso_reset_ids,
+ .driver = {
+ .name = "rtd1625-iso-reset",
+ },
+};
+module_auxiliary_driver(rtd1625_iso_driver);
+
+MODULE_DESCRIPTION("Realtek RTD1625 ISO Reset Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("REALTEK_RESET");
--
2.43.0
^ permalink raw reply related
* [PATCH v9 10/12] clk: realtek: Add RTD1625-CRT clock controller driver
From: Yu-Chun Lin @ 2026-06-24 11:29 UTC (permalink / raw)
To: mturquette, sboyd, robh, krzk+dt, conor+dt, p.zabel, cylee12,
afaerber, jyanchou, bmasney
Cc: devicetree, linux-clk, linux-kernel, linux-arm-kernel,
linux-realtek-soc, james.tai, cy.huang, stanley_chang,
eleanor.lin
In-Reply-To: <20260624112940.3475605-1-eleanor.lin@realtek.com>
From: Cheng-Yu Lee <cylee12@realtek.com>
Add support for the CRT (Clock, Reset, and Test) domain clock controller
on the Realtek RTD1625 SoC. This driver provides essential clock sources
(including PLLs), gating, and multiplexing functionalities for the
platform's peripherals.
Because the reset controller shares the same register space with this
CRT clock controller, this driver also acts as the parent device and
registers the reset controller as an auxiliary device on the auxiliary
bus.
Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
---
Changes in v9:
- Remove reset-related code to patch 3.
---
drivers/clk/realtek/Kconfig | 15 +
drivers/clk/realtek/Makefile | 1 +
drivers/clk/realtek/clk-rtd1625-crt.c | 792 ++++++++++++++++++++++++++
3 files changed, 808 insertions(+)
create mode 100644 drivers/clk/realtek/clk-rtd1625-crt.c
diff --git a/drivers/clk/realtek/Kconfig b/drivers/clk/realtek/Kconfig
index 2ff780581ae0..94a92b29d891 100644
--- a/drivers/clk/realtek/Kconfig
+++ b/drivers/clk/realtek/Kconfig
@@ -30,4 +30,19 @@ config RTK_CLK_COMMON
config RTK_CLK_PLL_MMC
bool
+config CLK_RTD1625
+ tristate "RTD1625 Clock Controller"
+ depends on RESET_CONTROLLER
+ select RESET_RTD1625
+ select RTK_CLK_COMMON
+ select RTK_CLK_PLL_MMC
+ help
+ Support for the clock controller on Realtek RTD1625 SoCs.
+
+ This driver provides clock sources, gating, multiplexing, and
+ reset control for peripherals on the RTD1625 platform.
+
+ Say Y here if your system is based on the RTD1625 and you need
+ its peripheral devices to function.
+
endif
diff --git a/drivers/clk/realtek/Makefile b/drivers/clk/realtek/Makefile
index 97447e92bc35..15b9eec74e36 100644
--- a/drivers/clk/realtek/Makefile
+++ b/drivers/clk/realtek/Makefile
@@ -8,3 +8,4 @@ clk-rtk-y += clk-regmap-gate.o
clk-rtk-y += clk-regmap-mux.o
clk-rtk-$(CONFIG_RTK_CLK_PLL_MMC) += clk-pll-mmc.o
+obj-$(CONFIG_CLK_RTD1625) += clk-rtd1625-crt.o
diff --git a/drivers/clk/realtek/clk-rtd1625-crt.c b/drivers/clk/realtek/clk-rtd1625-crt.c
new file mode 100644
index 000000000000..6fa1c1f0d4f3
--- /dev/null
+++ b/drivers/clk/realtek/clk-rtd1625-crt.c
@@ -0,0 +1,792 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022-2026 Realtek Semiconductor Corporation
+ * Author: Cheng-Yu Lee <cylee12@realtek.com>
+ */
+
+#include <dt-bindings/clock/realtek,rtd1625-clk.h>
+#include <linux/array_size.h>
+#include <linux/bits.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/spinlock.h>
+#include "clk-pll.h"
+#include "clk-regmap-gate.h"
+#include "clk-regmap-mux.h"
+
+#define RTD1625_CRT_CLK_MAX 172
+#define RTD1625_CRT_RSTN_MAX 123
+
+#define RTD1625_REG_PLL_ACPU1 0x10c
+#define RTD1625_REG_PLL_ACPU2 0x110
+#define RTD1625_REG_PLL_SSC_DIG_ACPU0 0x5c0
+#define RTD1625_REG_PLL_SSC_DIG_ACPU1 0x5c4
+#define RTD1625_REG_PLL_SSC_DIG_ACPU2 0x5c8
+#define RTD1625_REG_PLL_SSC_DIG_ACPU_DBG2 0x5dc
+
+#define RTD1625_REG_PLL_VE1_1 0x114
+#define RTD1625_REG_PLL_VE1_2 0x118
+#define RTD1625_REG_PLL_SSC_DIG_VE1_0 0x580
+#define RTD1625_REG_PLL_SSC_DIG_VE1_1 0x584
+#define RTD1625_REG_PLL_SSC_DIG_VE1_2 0x588
+#define RTD1625_REG_PLL_SSC_DIG_VE1_DBG2 0x59c
+
+#define RTD1625_REG_PLL_GPU1 0x1c0
+#define RTD1625_REG_PLL_GPU2 0x1c4
+#define RTD1625_REG_PLL_SSC_DIG_GPU0 0x5a0
+#define RTD1625_REG_PLL_SSC_DIG_GPU1 0x5a4
+#define RTD1625_REG_PLL_SSC_DIG_GPU2 0x5a8
+#define RTD1625_REG_PLL_SSC_DIG_GPU_DBG2 0x5bc
+
+#define RTD1625_REG_PLL_NPU1 0x1c8
+#define RTD1625_REG_PLL_NPU2 0x1cc
+#define RTD1625_REG_PLL_SSC_DIG_NPU0 0x800
+#define RTD1625_REG_PLL_SSC_DIG_NPU1 0x804
+#define RTD1625_REG_PLL_SSC_DIG_NPU2 0x808
+#define RTD1625_REG_PLL_SSC_DIG_NPU_DBG2 0x81c
+
+#define RTD1625_REG_PLL_VE2_1 0x1d0
+#define RTD1625_REG_PLL_VE2_2 0x1d4
+#define RTD1625_REG_PLL_SSC_DIG_VE2_0 0x5e0
+#define RTD1625_REG_PLL_SSC_DIG_VE2_1 0x5e4
+#define RTD1625_REG_PLL_SSC_DIG_VE2_2 0x5e8
+#define RTD1625_REG_PLL_SSC_DIG_VE2_DBG2 0x5fc
+
+#define RTD1625_REG_PLL_HIFI1 0x1d8
+#define RTD1625_REG_PLL_HIFI2 0x1dc
+#define RTD1625_REG_PLL_SSC_DIG_HIFI0 0x6e0
+#define RTD1625_REG_PLL_SSC_DIG_HIFI1 0x6e4
+#define RTD1625_REG_PLL_SSC_DIG_HIFI2 0x6e8
+#define RTD1625_REG_PLL_SSC_DIG_HIFI_DBG2 0x6fc
+
+#define RTD1625_REG_PLL_BUS1 0x524
+
+#define RTD1625_REG_PLL_SSC_DIG_DDSA1 0x564
+
+#define RTD1625_REG_PLL_SSC_DIG_DCSB1 0x544
+
+static const char * const clk_gpu_parents[] = {"pll_gpu", "clk_sys"};
+static CLK_REGMAP_MUX(clk_gpu, clk_gpu_parents, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+ 0x28, 12, 0x1);
+static const char * const clk_ve_parents[] = {"pll_vo", "clk_sysh", "pll_ve1", "pll_ve2"};
+static CLK_REGMAP_MUX(clk_ve1, clk_ve_parents, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+ 0x4c, 0, 0x3);
+static CLK_REGMAP_MUX(clk_ve2, clk_ve_parents, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+ 0x4c, 3, 0x3);
+static CLK_REGMAP_MUX(clk_ve4, clk_ve_parents, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+ 0x4c, 6, 0x3);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_misc, CLK_IS_CRITICAL, 0x50, 0, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_pcie0, 0, 0x50, 2, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_gspi, 0, 0x50, 6, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_iso_misc, 0, 0x50, 10, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_sds, 0, 0x50, 12, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_hdmi, 0, 0x50, 14, 1);
+static CLK_REGMAP_GATE(clk_en_gpu, "clk_gpu", CLK_SET_RATE_PARENT, 0x50, 18, 1);
+static CLK_REGMAP_GATE(clk_en_ve1, "clk_ve1", CLK_SET_RATE_PARENT, 0x50, 20, 1);
+static CLK_REGMAP_GATE(clk_en_ve2, "clk_ve2", CLK_SET_RATE_PARENT, 0x50, 22, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_se, 0, 0x50, 30, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_md, 0, 0x54, 4, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_tp, CLK_IS_CRITICAL, 0x54, 6, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_rcic, 0, 0x54, 8, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_nf, 0, 0x54, 10, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_emmc, 0, 0x54, 12, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_sd, 0, 0x54, 14, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_sdio_ip, 0, 0x54, 16, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_mipi_csi, 0, 0x54, 18, 1);
+static CLK_REGMAP_GATE(clk_en_emmc_ip, "pll_emmc", CLK_SET_RATE_PARENT, 0x54, 20, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_sdio, 0, 0x54, 22, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_sd_ip, 0, 0x54, 24, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_tpb, 0, 0x54, 28, 1);
+static CLK_REGMAP_GATE(clk_en_misc_sc1, "clk_en_misc", 0, 0x54, 30, 1);
+static CLK_REGMAP_GATE(clk_en_misc_i2c_3, "clk_en_misc", 0, 0x58, 0, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_jpeg, 0, 0x58, 4, 1);
+static CLK_REGMAP_GATE(clk_en_acpu, "pll_acpu", CLK_SET_RATE_PARENT,
+ 0x58, 6, 1);
+static CLK_REGMAP_GATE(clk_en_misc_sc0, "clk_en_misc", 0, 0x58, 10, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_hdmirx, 0, 0x58, 26, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_hse, CLK_IS_CRITICAL, 0x58, 28, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_fan, 0, 0x5c, 2, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_sata_wrap_sys, 0, 0x5c, 8, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_sata_wrap_sysh, 0, 0x5c, 10, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_sata_mac_sysh, 0, 0x5c, 12, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_r2rdsc, 0, 0x5c, 14, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_pcie1, 0, 0x5c, 18, 1);
+static CLK_REGMAP_GATE(clk_en_misc_i2c_4, "clk_en_misc", 0, 0x5c, 20, 1);
+static CLK_REGMAP_GATE(clk_en_misc_i2c_5, "clk_en_misc", 0, 0x5c, 22, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_tsio, 0, 0x5c, 24, 1);
+static CLK_REGMAP_GATE(clk_en_ve4, "clk_ve4", CLK_SET_RATE_PARENT,
+ 0x5c, 26, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_edp, 0, 0x5c, 28, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_tsio_trx, 0, 0x5c, 30, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_pcie2, 0, 0x8c, 0, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_earc, 0, 0x8c, 4, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_lite, 0, 0x8c, 6, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_mipi_dsi, 0, 0x8c, 8, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_npupp, 0, 0x8c, 10, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_npu, 0, 0x8c, 12, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_aucpu0, 0, 0x8c, 14, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_aucpu1, 0, 0x8c, 16, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_nsram, 0, 0x8c, 18, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_hdmitop, 0, 0x8c, 20, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_aucpu_iso_npu, 0, 0x8c, 24, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_keyladder, 0, 0x8c, 26, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_ifcp_klm, 0, 0x8c, 28, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_ifcp, 0, 0x8c, 30, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_mdl_genpw, 0, 0xb0, 0, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_mdl_chip, 0, 0xb0, 2, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_mdl_ip, 0, 0xb0, 4, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_mdlm2m, 0, 0xb0, 6, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_mdl_xtal, 0, 0xb0, 8, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_test_mux, 0, 0xb0, 10, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_dla, 0, 0xb0, 12, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_tpcw, 0, 0xb0, 16, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_gpu_ts_src, 0, 0xb0, 18, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_vi, 0, 0xb0, 22, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_lvds1, 0, 0xb0, 24, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_lvds2, 0, 0xb0, 26, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_aucpu, 0, 0xb0, 28, 1);
+static CLK_REGMAP_GATE(clk_en_ur1, "clk_en_ur_top", 0, 0x884, 0, 1);
+static CLK_REGMAP_GATE(clk_en_ur2, "clk_en_ur_top", 0, 0x884, 2, 1);
+static CLK_REGMAP_GATE(clk_en_ur3, "clk_en_ur_top", 0, 0x884, 4, 1);
+static CLK_REGMAP_GATE(clk_en_ur4, "clk_en_ur_top", 0, 0x884, 6, 1);
+static CLK_REGMAP_GATE(clk_en_ur5, "clk_en_ur_top", 0, 0x884, 8, 1);
+static CLK_REGMAP_GATE(clk_en_ur6, "clk_en_ur_top", 0, 0x884, 10, 1);
+static CLK_REGMAP_GATE(clk_en_ur7, "clk_en_ur_top", 0, 0x884, 12, 1);
+static CLK_REGMAP_GATE(clk_en_ur8, "clk_en_ur_top", 0, 0x884, 14, 1);
+static CLK_REGMAP_GATE(clk_en_ur9, "clk_en_ur_top", 0, 0x884, 16, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_ur_top, CLK_IS_CRITICAL, 0x884, 18, 1);
+static CLK_REGMAP_GATE(clk_en_misc_i2c_7, "clk_en_misc", 0, 0x884, 28, 1);
+static CLK_REGMAP_GATE(clk_en_misc_i2c_6, "clk_en_misc", 0, 0x884, 30, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_spi0, 0, 0x894, 0, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_spi1, 0, 0x894, 2, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_spi2, 0, 0x894, 4, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_lsadc0, 0, 0x894, 16, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_lsadc1, 0, 0x894, 18, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_isomis_dma, 0, 0x894, 20, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_dptx, 0, 0x894, 24, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_npu_mipi_csi, 0, 0x894, 26, 1);
+static CLK_REGMAP_GATE_NO_PARENT(clk_en_edptx, 0, 0x894, 28, 1);
+
+#define FREQ_NF_MASK 0x7ffff
+#define FREQ_NF(_r, _nf) {.rate = _r, .val = (_nf),}
+
+static const struct freq_table acpu_tbl[] = {
+ FREQ_NF(513000000, 0x11000),
+ FREQ_TABLE_END
+};
+
+static const struct freq_table ve_tbl[] = {
+ FREQ_NF(553500000, 0x12800),
+ FREQ_NF(661500000, 0x16800),
+ FREQ_NF(688500000, 0x17800),
+ FREQ_TABLE_END
+};
+
+static const struct freq_table bus_tbl[] = {
+ FREQ_NF(513000000, 0x11000),
+ FREQ_NF(540000000, 0x12000),
+ FREQ_NF(553500000, 0x12800),
+ FREQ_TABLE_END
+};
+
+static const struct freq_table ddsa_tbl[] = {
+ FREQ_NF(432000000, 0xe000),
+ FREQ_TABLE_END
+};
+
+static const struct freq_table gpu_tbl[] = {
+ FREQ_NF(405000000, 0xd000),
+ FREQ_NF(540000000, 0x12000),
+ FREQ_NF(661500000, 0x16800),
+ FREQ_NF(729000000, 0x19000),
+ FREQ_NF(810000000, 0x1c000),
+ FREQ_NF(850500000, 0x1d800),
+ FREQ_TABLE_END
+};
+
+static const struct freq_table hifi_tbl[] = {
+ FREQ_NF(756000000, 0x1a000),
+ FREQ_NF(810000000, 0x1c000),
+ FREQ_TABLE_END
+};
+
+static const struct freq_table npu_tbl[] = {
+ FREQ_NF(661500000, 0x16800),
+ FREQ_NF(729000000, 0x19000),
+ FREQ_NF(810000000, 0x1c000),
+ FREQ_TABLE_END
+};
+
+static const struct reg_sequence pll_acpu_seq_power_on[] = {
+ {RTD1625_REG_PLL_ACPU2, 0x5},
+ {RTD1625_REG_PLL_ACPU2, 0x7},
+ {RTD1625_REG_PLL_ACPU1, 0x54000},
+ {RTD1625_REG_PLL_SSC_DIG_ACPU2, 0x1e1f8e},
+ {RTD1625_REG_PLL_SSC_DIG_ACPU0, 0x4},
+ {RTD1625_REG_PLL_SSC_DIG_ACPU0, 0x5, 200},
+ {RTD1625_REG_PLL_ACPU2, 0x3},
+};
+
+static const struct reg_sequence pll_acpu_seq_power_off[] = {
+ {RTD1625_REG_PLL_ACPU2, 0x4},
+};
+
+static const struct reg_sequence pll_acpu_seq_pre_set_freq[] = {
+ {RTD1625_REG_PLL_SSC_DIG_ACPU0, 0x4},
+};
+
+static const struct reg_sequence pll_acpu_seq_post_set_freq[] = {
+ {RTD1625_REG_PLL_SSC_DIG_ACPU0, 0x5},
+};
+
+static struct clk_pll pll_acpu = {
+ .clkr.hw.init = CLK_HW_INIT("pll_acpu", "osc27m", &rtk_clk_pll_ops, CLK_GET_RATE_NOCACHE),
+ .seq_power_on = pll_acpu_seq_power_on,
+ .num_seq_power_on = ARRAY_SIZE(pll_acpu_seq_power_on),
+ .seq_power_off = pll_acpu_seq_power_off,
+ .num_seq_power_off = ARRAY_SIZE(pll_acpu_seq_power_off),
+ .seq_pre_set_freq = pll_acpu_seq_pre_set_freq,
+ .num_seq_pre_set_freq = ARRAY_SIZE(pll_acpu_seq_pre_set_freq),
+ .seq_post_set_freq = pll_acpu_seq_post_set_freq,
+ .num_seq_post_set_freq = ARRAY_SIZE(pll_acpu_seq_post_set_freq),
+ .freq_reg = RTD1625_REG_PLL_SSC_DIG_ACPU1,
+ .freq_tbl = acpu_tbl,
+ .freq_mask = FREQ_NF_MASK,
+ .freq_ready_reg = RTD1625_REG_PLL_SSC_DIG_ACPU_DBG2,
+ .freq_ready_mask = BIT(20),
+ .freq_ready_val = BIT(20),
+ .power_reg = RTD1625_REG_PLL_ACPU2,
+ .power_mask = 0x7,
+ .power_val_on = 0x3,
+ .lock = __SPIN_LOCK_UNLOCKED(pll_acpu.lock),
+};
+
+static const struct reg_sequence pll_ve1_seq_power_on[] = {
+ {RTD1625_REG_PLL_VE1_2, 0x5},
+ {RTD1625_REG_PLL_VE1_2, 0x7},
+ {RTD1625_REG_PLL_VE1_1, 0x54000},
+ {RTD1625_REG_PLL_SSC_DIG_VE1_0, 0x4},
+ {RTD1625_REG_PLL_SSC_DIG_VE1_0, 0x5, 200},
+ {RTD1625_REG_PLL_VE1_2, 0x3},
+};
+
+static const struct reg_sequence pll_ve1_seq_power_off[] = {
+ {RTD1625_REG_PLL_VE1_2, 0x4},
+};
+
+static const struct reg_sequence pll_ve1_seq_pre_set_freq[] = {
+ {RTD1625_REG_PLL_SSC_DIG_VE1_0, 0x4},
+};
+
+static const struct reg_sequence pll_ve1_seq_post_set_freq[] = {
+ {RTD1625_REG_PLL_SSC_DIG_VE1_0, 0x5},
+};
+
+static struct clk_pll pll_ve1 = {
+ .clkr.hw.init = CLK_HW_INIT("pll_ve1", "osc27m", &rtk_clk_pll_ops, CLK_GET_RATE_NOCACHE),
+ .seq_power_on = pll_ve1_seq_power_on,
+ .num_seq_power_on = ARRAY_SIZE(pll_ve1_seq_power_on),
+ .seq_power_off = pll_ve1_seq_power_off,
+ .num_seq_power_off = ARRAY_SIZE(pll_ve1_seq_power_off),
+ .seq_pre_set_freq = pll_ve1_seq_pre_set_freq,
+ .num_seq_pre_set_freq = ARRAY_SIZE(pll_ve1_seq_pre_set_freq),
+ .seq_post_set_freq = pll_ve1_seq_post_set_freq,
+ .num_seq_post_set_freq = ARRAY_SIZE(pll_ve1_seq_post_set_freq),
+ .freq_reg = RTD1625_REG_PLL_SSC_DIG_VE1_1,
+ .freq_tbl = ve_tbl,
+ .freq_mask = FREQ_NF_MASK,
+ .freq_ready_reg = RTD1625_REG_PLL_SSC_DIG_VE1_DBG2,
+ .freq_ready_mask = BIT(20),
+ .freq_ready_val = BIT(20),
+ .power_reg = RTD1625_REG_PLL_VE1_2,
+ .power_mask = 0x7,
+ .power_val_on = 0x3,
+ .lock = __SPIN_LOCK_UNLOCKED(pll_ve1.lock),
+};
+
+static struct clk_pll pll_ddsa = {
+ .clkr.hw.init = CLK_HW_INIT("pll_ddsa", "osc27m", &rtk_clk_pll_ro_ops,
+ CLK_GET_RATE_NOCACHE),
+ .freq_reg = RTD1625_REG_PLL_SSC_DIG_DDSA1,
+ .freq_tbl = ddsa_tbl,
+ .freq_mask = FREQ_NF_MASK,
+ .lock = __SPIN_LOCK_UNLOCKED(pll_ddsa.lock),
+};
+
+static struct clk_pll pll_bus = {
+ .clkr.hw.init = CLK_HW_INIT("pll_bus", "osc27m", &rtk_clk_pll_ro_ops,
+ CLK_GET_RATE_NOCACHE),
+ .freq_reg = RTD1625_REG_PLL_BUS1,
+ .freq_tbl = bus_tbl,
+ .freq_mask = FREQ_NF_MASK,
+ .lock = __SPIN_LOCK_UNLOCKED(pll_bus.lock),
+};
+
+static CLK_FIXED_FACTOR(clk_sys, "clk_sys", "pll_bus", 2, 1, 0);
+
+static struct clk_pll pll_dcsb = {
+ .clkr.hw.init = CLK_HW_INIT("pll_dcsb", "osc27m", &rtk_clk_pll_ro_ops,
+ CLK_GET_RATE_NOCACHE),
+ .freq_reg = RTD1625_REG_PLL_SSC_DIG_DCSB1,
+ .freq_tbl = bus_tbl,
+ .freq_mask = FREQ_NF_MASK,
+ .lock = __SPIN_LOCK_UNLOCKED(pll_dcsb.lock),
+};
+
+static CLK_FIXED_FACTOR(clk_sysh, "clk_sysh", "pll_dcsb", 1, 1, 0);
+
+static const struct reg_sequence pll_gpu_seq_power_on[] = {
+ {RTD1625_REG_PLL_GPU2, 0x5},
+ {RTD1625_REG_PLL_GPU2, 0x7},
+ {RTD1625_REG_PLL_GPU1, 0x54000},
+ {RTD1625_REG_PLL_SSC_DIG_GPU0, 0x4},
+ {RTD1625_REG_PLL_SSC_DIG_GPU0, 0x5, 200},
+ {RTD1625_REG_PLL_GPU2, 0x3},
+};
+
+static const struct reg_sequence pll_gpu_seq_power_off[] = {
+ {RTD1625_REG_PLL_GPU2, 0x4},
+};
+
+static const struct reg_sequence pll_gpu_seq_pre_set_freq[] = {
+ {RTD1625_REG_PLL_SSC_DIG_GPU0, 0x4},
+};
+
+static const struct reg_sequence pll_gpu_seq_post_set_freq[] = {
+ {RTD1625_REG_PLL_SSC_DIG_GPU0, 0x5},
+};
+
+static struct clk_pll pll_gpu = {
+ .clkr.hw.init = CLK_HW_INIT("pll_gpu", "osc27m", &rtk_clk_pll_ops, CLK_GET_RATE_NOCACHE),
+ .seq_power_on = pll_gpu_seq_power_on,
+ .num_seq_power_on = ARRAY_SIZE(pll_gpu_seq_power_on),
+ .seq_power_off = pll_gpu_seq_power_off,
+ .num_seq_power_off = ARRAY_SIZE(pll_gpu_seq_power_off),
+ .seq_pre_set_freq = pll_gpu_seq_pre_set_freq,
+ .num_seq_pre_set_freq = ARRAY_SIZE(pll_gpu_seq_pre_set_freq),
+ .seq_post_set_freq = pll_gpu_seq_post_set_freq,
+ .num_seq_post_set_freq = ARRAY_SIZE(pll_gpu_seq_post_set_freq),
+ .freq_reg = RTD1625_REG_PLL_SSC_DIG_GPU1,
+ .freq_tbl = gpu_tbl,
+ .freq_mask = FREQ_NF_MASK,
+ .freq_ready_reg = RTD1625_REG_PLL_SSC_DIG_GPU_DBG2,
+ .freq_ready_mask = BIT(20),
+ .freq_ready_val = BIT(20),
+ .power_reg = RTD1625_REG_PLL_GPU2,
+ .power_mask = 0x7,
+ .power_val_on = 0x3,
+ .lock = __SPIN_LOCK_UNLOCKED(pll_gpu.lock),
+};
+
+static const struct reg_sequence pll_npu_seq_power_on[] = {
+ {RTD1625_REG_PLL_NPU2, 0x5},
+ {RTD1625_REG_PLL_NPU2, 0x7},
+ {RTD1625_REG_PLL_NPU1, 0x54000},
+ {RTD1625_REG_PLL_SSC_DIG_NPU0, 0x4},
+ {RTD1625_REG_PLL_SSC_DIG_NPU0, 0x5, 200},
+ {RTD1625_REG_PLL_NPU2, 0x3},
+};
+
+static const struct reg_sequence pll_npu_seq_power_off[] = {
+ {RTD1625_REG_PLL_NPU2, 0x4},
+ {RTD1625_REG_PLL_NPU1, 0x54010},
+};
+
+static const struct reg_sequence pll_npu_seq_pre_set_freq[] = {
+ {RTD1625_REG_PLL_SSC_DIG_NPU0, 0x4},
+};
+
+static const struct reg_sequence pll_npu_seq_post_set_freq[] = {
+ {RTD1625_REG_PLL_SSC_DIG_NPU0, 0x5},
+};
+
+static struct clk_pll pll_npu = {
+ .clkr.hw.init = CLK_HW_INIT("pll_npu", "osc27m", &rtk_clk_pll_ops,
+ CLK_GET_RATE_NOCACHE),
+ .seq_power_on = pll_npu_seq_power_on,
+ .num_seq_power_on = ARRAY_SIZE(pll_npu_seq_power_on),
+ .seq_power_off = pll_npu_seq_power_off,
+ .num_seq_power_off = ARRAY_SIZE(pll_npu_seq_power_off),
+ .seq_pre_set_freq = pll_npu_seq_pre_set_freq,
+ .num_seq_pre_set_freq = ARRAY_SIZE(pll_npu_seq_pre_set_freq),
+ .seq_post_set_freq = pll_npu_seq_post_set_freq,
+ .num_seq_post_set_freq = ARRAY_SIZE(pll_npu_seq_post_set_freq),
+ .freq_reg = RTD1625_REG_PLL_SSC_DIG_NPU1,
+ .freq_tbl = npu_tbl,
+ .freq_mask = FREQ_NF_MASK,
+ .freq_ready_reg = RTD1625_REG_PLL_SSC_DIG_NPU_DBG2,
+ .freq_ready_mask = BIT(20),
+ .freq_ready_val = BIT(20),
+ .power_reg = RTD1625_REG_PLL_NPU2,
+ .power_mask = 0x7,
+ .power_val_on = 0x3,
+ .lock = __SPIN_LOCK_UNLOCKED(pll_npu.lock),
+};
+
+static CLK_FIXED_FACTOR(clk_npu, "clk_npu", "pll_npu", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(clk_npu_mipi_csi, "clk_npu_mipi_csi", "pll_npu", 1, 1,
+ CLK_SET_RATE_PARENT);
+
+static const struct reg_sequence pll_ve2_seq_power_on[] = {
+ {RTD1625_REG_PLL_VE2_2, 0x5},
+ {RTD1625_REG_PLL_VE2_2, 0x7},
+ {RTD1625_REG_PLL_VE2_1, 0x54000},
+ {RTD1625_REG_PLL_SSC_DIG_VE2_0, 0x4},
+ {RTD1625_REG_PLL_SSC_DIG_VE2_0, 0x5, 200},
+ {RTD1625_REG_PLL_VE2_2, 0x3},
+};
+
+static const struct reg_sequence pll_ve2_seq_power_off[] = {
+ {RTD1625_REG_PLL_VE2_2, 0x4},
+};
+
+static const struct reg_sequence pll_ve2_seq_pre_set_freq[] = {
+ {RTD1625_REG_PLL_SSC_DIG_VE2_0, 0x4},
+};
+
+static const struct reg_sequence pll_ve2_seq_post_set_freq[] = {
+ {RTD1625_REG_PLL_SSC_DIG_VE2_0, 0x5},
+};
+
+static struct clk_pll pll_ve2 = {
+ .clkr.hw.init = CLK_HW_INIT("pll_ve2", "osc27m", &rtk_clk_pll_ops, CLK_GET_RATE_NOCACHE),
+ .seq_power_on = pll_ve2_seq_power_on,
+ .num_seq_power_on = ARRAY_SIZE(pll_ve2_seq_power_on),
+ .seq_power_off = pll_ve2_seq_power_off,
+ .num_seq_power_off = ARRAY_SIZE(pll_ve2_seq_power_off),
+ .seq_pre_set_freq = pll_ve2_seq_pre_set_freq,
+ .num_seq_pre_set_freq = ARRAY_SIZE(pll_ve2_seq_pre_set_freq),
+ .seq_post_set_freq = pll_ve2_seq_post_set_freq,
+ .num_seq_post_set_freq = ARRAY_SIZE(pll_ve2_seq_post_set_freq),
+ .freq_reg = RTD1625_REG_PLL_SSC_DIG_VE2_1,
+ .freq_tbl = ve_tbl,
+ .freq_mask = FREQ_NF_MASK,
+ .freq_ready_reg = RTD1625_REG_PLL_SSC_DIG_VE2_DBG2,
+ .freq_ready_mask = BIT(20),
+ .freq_ready_val = BIT(20),
+ .power_reg = RTD1625_REG_PLL_VE2_2,
+ .power_mask = 0x7,
+ .power_val_on = 0x3,
+ .lock = __SPIN_LOCK_UNLOCKED(pll_ve2.lock),
+};
+
+static const struct reg_sequence pll_hifi_seq_power_on[] = {
+ {RTD1625_REG_PLL_HIFI2, 0x5},
+ {RTD1625_REG_PLL_HIFI2, 0x7},
+ {RTD1625_REG_PLL_HIFI1, 0x54000},
+ {RTD1625_REG_PLL_SSC_DIG_HIFI0, 0x4},
+ {RTD1625_REG_PLL_SSC_DIG_HIFI0, 0x5, 200},
+ {RTD1625_REG_PLL_HIFI2, 0x3},
+};
+
+static const struct reg_sequence pll_hifi_seq_power_off[] = {
+ {RTD1625_REG_PLL_HIFI2, 0x4},
+};
+
+static const struct reg_sequence pll_hifi_seq_pre_set_freq[] = {
+ {RTD1625_REG_PLL_SSC_DIG_HIFI0, 0x4},
+};
+
+static const struct reg_sequence pll_hifi_seq_post_set_freq[] = {
+ {RTD1625_REG_PLL_SSC_DIG_HIFI0, 0x5},
+};
+
+static struct clk_pll pll_hifi = {
+ .clkr.hw.init = CLK_HW_INIT("pll_hifi", "osc27m", &rtk_clk_pll_ops, CLK_GET_RATE_NOCACHE),
+ .seq_power_on = pll_hifi_seq_power_on,
+ .num_seq_power_on = ARRAY_SIZE(pll_hifi_seq_power_on),
+ .seq_power_off = pll_hifi_seq_power_off,
+ .num_seq_power_off = ARRAY_SIZE(pll_hifi_seq_power_off),
+ .seq_pre_set_freq = pll_hifi_seq_pre_set_freq,
+ .num_seq_pre_set_freq = ARRAY_SIZE(pll_hifi_seq_pre_set_freq),
+ .seq_post_set_freq = pll_hifi_seq_post_set_freq,
+ .num_seq_post_set_freq = ARRAY_SIZE(pll_hifi_seq_post_set_freq),
+ .freq_reg = RTD1625_REG_PLL_SSC_DIG_HIFI1,
+ .freq_tbl = hifi_tbl,
+ .freq_mask = FREQ_NF_MASK,
+ .freq_ready_reg = RTD1625_REG_PLL_SSC_DIG_HIFI_DBG2,
+ .freq_ready_mask = BIT(20),
+ .freq_ready_val = BIT(20),
+ .power_reg = RTD1625_REG_PLL_HIFI2,
+ .power_mask = 0x7,
+ .power_val_on = 0x3,
+ .lock = __SPIN_LOCK_UNLOCKED(pll_hifi.lock),
+};
+
+static CLK_FIXED_FACTOR(pll_emmc_ref, "pll_emmc_ref", "osc27m", 1, 1, 0);
+
+static struct clk_pll_mmc pll_emmc = {
+ .pll_ofs = 0x1f0,
+ .ssc_dig_ofs = 0x6b0,
+ .clkr.hw.init = CLK_HW_INIT("pll_emmc", "pll_emmc_ref", &rtk_clk_pll_mmc_ops, 0),
+ .phase0_hw.init = CLK_HW_INIT("pll_emmc_vp0", "pll_emmc", &rtk_clk_pll_mmc_phase_ops, 0),
+ .phase1_hw.init = CLK_HW_INIT("pll_emmc_vp1", "pll_emmc", &rtk_clk_pll_mmc_phase_ops, 0),
+};
+
+static struct clk_regmap * const rtd1625_crt_regmap_clks[] = {
+ &clk_en_misc.clkr,
+ &clk_en_pcie0.clkr,
+ &clk_en_gspi.clkr,
+ &clk_en_iso_misc.clkr,
+ &clk_en_sds.clkr,
+ &clk_en_hdmi.clkr,
+ &clk_en_gpu.clkr,
+ &clk_en_ve1.clkr,
+ &clk_en_ve2.clkr,
+ &clk_en_se.clkr,
+ &clk_en_md.clkr,
+ &clk_en_tp.clkr,
+ &clk_en_rcic.clkr,
+ &clk_en_nf.clkr,
+ &clk_en_emmc.clkr,
+ &clk_en_sd.clkr,
+ &clk_en_sdio_ip.clkr,
+ &clk_en_mipi_csi.clkr,
+ &clk_en_emmc_ip.clkr,
+ &clk_en_sdio.clkr,
+ &clk_en_sd_ip.clkr,
+ &clk_en_tpb.clkr,
+ &clk_en_misc_sc1.clkr,
+ &clk_en_misc_i2c_3.clkr,
+ &clk_en_jpeg.clkr,
+ &clk_en_acpu.clkr,
+ &clk_en_misc_sc0.clkr,
+ &clk_en_hdmirx.clkr,
+ &clk_en_hse.clkr,
+ &clk_en_fan.clkr,
+ &clk_en_sata_wrap_sys.clkr,
+ &clk_en_sata_wrap_sysh.clkr,
+ &clk_en_sata_mac_sysh.clkr,
+ &clk_en_r2rdsc.clkr,
+ &clk_en_pcie1.clkr,
+ &clk_en_misc_i2c_4.clkr,
+ &clk_en_misc_i2c_5.clkr,
+ &clk_en_tsio.clkr,
+ &clk_en_ve4.clkr,
+ &clk_en_edp.clkr,
+ &clk_en_tsio_trx.clkr,
+ &clk_en_pcie2.clkr,
+ &clk_en_earc.clkr,
+ &clk_en_lite.clkr,
+ &clk_en_mipi_dsi.clkr,
+ &clk_en_npupp.clkr,
+ &clk_en_npu.clkr,
+ &clk_en_aucpu0.clkr,
+ &clk_en_aucpu1.clkr,
+ &clk_en_nsram.clkr,
+ &clk_en_hdmitop.clkr,
+ &clk_en_aucpu_iso_npu.clkr,
+ &clk_en_keyladder.clkr,
+ &clk_en_ifcp_klm.clkr,
+ &clk_en_ifcp.clkr,
+ &clk_en_mdl_genpw.clkr,
+ &clk_en_mdl_chip.clkr,
+ &clk_en_mdl_ip.clkr,
+ &clk_en_mdlm2m.clkr,
+ &clk_en_mdl_xtal.clkr,
+ &clk_en_test_mux.clkr,
+ &clk_en_dla.clkr,
+ &clk_en_tpcw.clkr,
+ &clk_en_gpu_ts_src.clkr,
+ &clk_en_vi.clkr,
+ &clk_en_lvds1.clkr,
+ &clk_en_lvds2.clkr,
+ &clk_en_aucpu.clkr,
+ &clk_en_ur1.clkr,
+ &clk_en_ur2.clkr,
+ &clk_en_ur3.clkr,
+ &clk_en_ur4.clkr,
+ &clk_en_ur5.clkr,
+ &clk_en_ur6.clkr,
+ &clk_en_ur7.clkr,
+ &clk_en_ur8.clkr,
+ &clk_en_ur9.clkr,
+ &clk_en_ur_top.clkr,
+ &clk_en_misc_i2c_7.clkr,
+ &clk_en_misc_i2c_6.clkr,
+ &clk_en_spi0.clkr,
+ &clk_en_spi1.clkr,
+ &clk_en_spi2.clkr,
+ &clk_en_lsadc0.clkr,
+ &clk_en_lsadc1.clkr,
+ &clk_en_isomis_dma.clkr,
+ &clk_en_dptx.clkr,
+ &clk_en_npu_mipi_csi.clkr,
+ &clk_en_edptx.clkr,
+ &clk_gpu.clkr,
+ &clk_ve1.clkr,
+ &clk_ve2.clkr,
+ &clk_ve4.clkr,
+ &pll_ve1.clkr,
+ &pll_ddsa.clkr,
+ &pll_bus.clkr,
+ &pll_dcsb.clkr,
+ &pll_gpu.clkr,
+ &pll_npu.clkr,
+ &pll_ve2.clkr,
+ &pll_hifi.clkr,
+ &pll_emmc.clkr,
+ &pll_acpu.clkr,
+};
+
+static struct clk_hw_onecell_data rtd1625_crt_hw_data = {
+ .num = RTD1625_CRT_CLK_MAX,
+ .hws = {
+ [RTD1625_CRT_CLK_EN_MISC] = &__clk_regmap_gate_hw(&clk_en_misc),
+ [RTD1625_CRT_CLK_EN_PCIE0] = &__clk_regmap_gate_hw(&clk_en_pcie0),
+ [RTD1625_CRT_CLK_EN_GSPI] = &__clk_regmap_gate_hw(&clk_en_gspi),
+ [RTD1625_CRT_CLK_EN_ISO_MISC] = &__clk_regmap_gate_hw(&clk_en_iso_misc),
+ [RTD1625_CRT_CLK_EN_SDS] = &__clk_regmap_gate_hw(&clk_en_sds),
+ [RTD1625_CRT_CLK_EN_HDMI] = &__clk_regmap_gate_hw(&clk_en_hdmi),
+ [RTD1625_CRT_CLK_EN_GPU] = &__clk_regmap_gate_hw(&clk_en_gpu),
+ [RTD1625_CRT_CLK_EN_VE1] = &__clk_regmap_gate_hw(&clk_en_ve1),
+ [RTD1625_CRT_CLK_EN_VE2] = &__clk_regmap_gate_hw(&clk_en_ve2),
+ [RTD1625_CRT_CLK_EN_MD] = &__clk_regmap_gate_hw(&clk_en_md),
+ [RTD1625_CRT_CLK_EN_TP] = &__clk_regmap_gate_hw(&clk_en_tp),
+ [RTD1625_CRT_CLK_EN_RCIC] = &__clk_regmap_gate_hw(&clk_en_rcic),
+ [RTD1625_CRT_CLK_EN_NF] = &__clk_regmap_gate_hw(&clk_en_nf),
+ [RTD1625_CRT_CLK_EN_EMMC] = &__clk_regmap_gate_hw(&clk_en_emmc),
+ [RTD1625_CRT_CLK_EN_SD] = &__clk_regmap_gate_hw(&clk_en_sd),
+ [RTD1625_CRT_CLK_EN_SDIO_IP] = &__clk_regmap_gate_hw(&clk_en_sdio_ip),
+ [RTD1625_CRT_CLK_EN_MIPI_CSI] = &__clk_regmap_gate_hw(&clk_en_mipi_csi),
+ [RTD1625_CRT_CLK_EN_EMMC_IP] = &__clk_regmap_gate_hw(&clk_en_emmc_ip),
+ [RTD1625_CRT_CLK_EN_SDIO] = &__clk_regmap_gate_hw(&clk_en_sdio),
+ [RTD1625_CRT_CLK_EN_SD_IP] = &__clk_regmap_gate_hw(&clk_en_sd_ip),
+ [RTD1625_CRT_CLK_EN_TPB] = &__clk_regmap_gate_hw(&clk_en_tpb),
+ [RTD1625_CRT_CLK_EN_MISC_SC1] = &__clk_regmap_gate_hw(&clk_en_misc_sc1),
+ [RTD1625_CRT_CLK_EN_MISC_I2C_3] = &__clk_regmap_gate_hw(&clk_en_misc_i2c_3),
+ [RTD1625_CRT_CLK_EN_ACPU] = &__clk_regmap_gate_hw(&clk_en_acpu),
+ [RTD1625_CRT_CLK_EN_JPEG] = &__clk_regmap_gate_hw(&clk_en_jpeg),
+ [RTD1625_CRT_CLK_EN_MISC_SC0] = &__clk_regmap_gate_hw(&clk_en_misc_sc0),
+ [RTD1625_CRT_CLK_EN_HDMIRX] = &__clk_regmap_gate_hw(&clk_en_hdmirx),
+ [RTD1625_CRT_CLK_EN_HSE] = &__clk_regmap_gate_hw(&clk_en_hse),
+ [RTD1625_CRT_CLK_EN_FAN] = &__clk_regmap_gate_hw(&clk_en_fan),
+ [RTD1625_CRT_CLK_EN_SATA_WRAP_SYS] = &__clk_regmap_gate_hw(&clk_en_sata_wrap_sys),
+ [RTD1625_CRT_CLK_EN_SATA_WRAP_SYSH] = &__clk_regmap_gate_hw(&clk_en_sata_wrap_sysh),
+ [RTD1625_CRT_CLK_EN_SATA_MAC_SYSH] = &__clk_regmap_gate_hw(&clk_en_sata_mac_sysh),
+ [RTD1625_CRT_CLK_EN_R2RDSC] = &__clk_regmap_gate_hw(&clk_en_r2rdsc),
+ [RTD1625_CRT_CLK_EN_PCIE1] = &__clk_regmap_gate_hw(&clk_en_pcie1),
+ [RTD1625_CRT_CLK_EN_MISC_I2C_4] = &__clk_regmap_gate_hw(&clk_en_misc_i2c_4),
+ [RTD1625_CRT_CLK_EN_MISC_I2C_5] = &__clk_regmap_gate_hw(&clk_en_misc_i2c_5),
+ [RTD1625_CRT_CLK_EN_TSIO] = &__clk_regmap_gate_hw(&clk_en_tsio),
+ [RTD1625_CRT_CLK_EN_VE4] = &__clk_regmap_gate_hw(&clk_en_ve4),
+ [RTD1625_CRT_CLK_EN_EDP] = &__clk_regmap_gate_hw(&clk_en_edp),
+ [RTD1625_CRT_CLK_EN_TSIO_TRX] = &__clk_regmap_gate_hw(&clk_en_tsio_trx),
+ [RTD1625_CRT_CLK_EN_PCIE2] = &__clk_regmap_gate_hw(&clk_en_pcie2),
+ [RTD1625_CRT_CLK_EN_EARC] = &__clk_regmap_gate_hw(&clk_en_earc),
+ [RTD1625_CRT_CLK_EN_LITE] = &__clk_regmap_gate_hw(&clk_en_lite),
+ [RTD1625_CRT_CLK_EN_MIPI_DSI] = &__clk_regmap_gate_hw(&clk_en_mipi_dsi),
+ [RTD1625_CRT_CLK_EN_NPUPP] = &__clk_regmap_gate_hw(&clk_en_npupp),
+ [RTD1625_CRT_CLK_EN_NPU] = &__clk_regmap_gate_hw(&clk_en_npu),
+ [RTD1625_CRT_CLK_EN_AUCPU0] = &__clk_regmap_gate_hw(&clk_en_aucpu0),
+ [RTD1625_CRT_CLK_EN_AUCPU1] = &__clk_regmap_gate_hw(&clk_en_aucpu1),
+ [RTD1625_CRT_CLK_EN_NSRAM] = &__clk_regmap_gate_hw(&clk_en_nsram),
+ [RTD1625_CRT_CLK_EN_HDMITOP] = &__clk_regmap_gate_hw(&clk_en_hdmitop),
+ [RTD1625_CRT_CLK_EN_AUCPU_ISO_NPU] = &__clk_regmap_gate_hw(&clk_en_aucpu_iso_npu),
+ [RTD1625_CRT_CLK_EN_KEYLADDER] = &__clk_regmap_gate_hw(&clk_en_keyladder),
+ [RTD1625_CRT_CLK_EN_IFCP_KLM] = &__clk_regmap_gate_hw(&clk_en_ifcp_klm),
+ [RTD1625_CRT_CLK_EN_IFCP] = &__clk_regmap_gate_hw(&clk_en_ifcp),
+ [RTD1625_CRT_CLK_EN_MDL_GENPW] = &__clk_regmap_gate_hw(&clk_en_mdl_genpw),
+ [RTD1625_CRT_CLK_EN_MDL_CHIP] = &__clk_regmap_gate_hw(&clk_en_mdl_chip),
+ [RTD1625_CRT_CLK_EN_MDL_IP] = &__clk_regmap_gate_hw(&clk_en_mdl_ip),
+ [RTD1625_CRT_CLK_EN_MDLM2M] = &__clk_regmap_gate_hw(&clk_en_mdlm2m),
+ [RTD1625_CRT_CLK_EN_MDL_XTAL] = &__clk_regmap_gate_hw(&clk_en_mdl_xtal),
+ [RTD1625_CRT_CLK_EN_TEST_MUX] = &__clk_regmap_gate_hw(&clk_en_test_mux),
+ [RTD1625_CRT_CLK_EN_DLA] = &__clk_regmap_gate_hw(&clk_en_dla),
+ [RTD1625_CRT_CLK_EN_TPCW] = &__clk_regmap_gate_hw(&clk_en_tpcw),
+ [RTD1625_CRT_CLK_EN_GPU_TS_SRC] = &__clk_regmap_gate_hw(&clk_en_gpu_ts_src),
+ [RTD1625_CRT_CLK_EN_VI] = &__clk_regmap_gate_hw(&clk_en_vi),
+ [RTD1625_CRT_CLK_EN_LVDS1] = &__clk_regmap_gate_hw(&clk_en_lvds1),
+ [RTD1625_CRT_CLK_EN_LVDS2] = &__clk_regmap_gate_hw(&clk_en_lvds2),
+ [RTD1625_CRT_CLK_EN_AUCPU] = &__clk_regmap_gate_hw(&clk_en_aucpu),
+ [RTD1625_CRT_CLK_EN_UR1] = &__clk_regmap_gate_hw(&clk_en_ur1),
+ [RTD1625_CRT_CLK_EN_UR2] = &__clk_regmap_gate_hw(&clk_en_ur2),
+ [RTD1625_CRT_CLK_EN_UR3] = &__clk_regmap_gate_hw(&clk_en_ur3),
+ [RTD1625_CRT_CLK_EN_UR4] = &__clk_regmap_gate_hw(&clk_en_ur4),
+ [RTD1625_CRT_CLK_EN_UR5] = &__clk_regmap_gate_hw(&clk_en_ur5),
+ [RTD1625_CRT_CLK_EN_UR6] = &__clk_regmap_gate_hw(&clk_en_ur6),
+ [RTD1625_CRT_CLK_EN_UR7] = &__clk_regmap_gate_hw(&clk_en_ur7),
+ [RTD1625_CRT_CLK_EN_UR8] = &__clk_regmap_gate_hw(&clk_en_ur8),
+ [RTD1625_CRT_CLK_EN_UR9] = &__clk_regmap_gate_hw(&clk_en_ur9),
+ [RTD1625_CRT_CLK_EN_UR_TOP] = &__clk_regmap_gate_hw(&clk_en_ur_top),
+ [RTD1625_CRT_CLK_EN_MISC_I2C_7] = &__clk_regmap_gate_hw(&clk_en_misc_i2c_7),
+ [RTD1625_CRT_CLK_EN_MISC_I2C_6] = &__clk_regmap_gate_hw(&clk_en_misc_i2c_6),
+ [RTD1625_CRT_CLK_EN_SPI0] = &__clk_regmap_gate_hw(&clk_en_spi0),
+ [RTD1625_CRT_CLK_EN_SPI1] = &__clk_regmap_gate_hw(&clk_en_spi1),
+ [RTD1625_CRT_CLK_EN_SPI2] = &__clk_regmap_gate_hw(&clk_en_spi2),
+ [RTD1625_CRT_CLK_EN_LSADC0] = &__clk_regmap_gate_hw(&clk_en_lsadc0),
+ [RTD1625_CRT_CLK_EN_LSADC1] = &__clk_regmap_gate_hw(&clk_en_lsadc1),
+ [RTD1625_CRT_CLK_EN_ISOMIS_DMA] = &__clk_regmap_gate_hw(&clk_en_isomis_dma),
+ [RTD1625_CRT_CLK_EN_DPTX] = &__clk_regmap_gate_hw(&clk_en_dptx),
+ [RTD1625_CRT_CLK_EN_NPU_MIPI_CSI] = &__clk_regmap_gate_hw(&clk_en_npu_mipi_csi),
+ [RTD1625_CRT_CLK_EN_EDPTX] = &__clk_regmap_gate_hw(&clk_en_edptx),
+ [RTD1625_CRT_CLK_GPU] = &__clk_regmap_mux_hw(&clk_gpu),
+ [RTD1625_CRT_CLK_VE1] = &__clk_regmap_mux_hw(&clk_ve1),
+ [RTD1625_CRT_CLK_VE2] = &__clk_regmap_mux_hw(&clk_ve2),
+ [RTD1625_CRT_CLK_VE4] = &__clk_regmap_mux_hw(&clk_ve4),
+ [RTD1625_CRT_PLL_VE1] = &__clk_pll_hw(&pll_ve1),
+ [RTD1625_CRT_PLL_DDSA] = &__clk_pll_hw(&pll_ddsa),
+ [RTD1625_CRT_PLL_BUS] = &__clk_pll_hw(&pll_bus),
+ [RTD1625_CRT_CLK_SYS] = &clk_sys.hw,
+ [RTD1625_CRT_PLL_DCSB] = &__clk_pll_hw(&pll_dcsb),
+ [RTD1625_CRT_CLK_SYSH] = &clk_sysh.hw,
+ [RTD1625_CRT_PLL_GPU] = &__clk_pll_hw(&pll_gpu),
+ [RTD1625_CRT_PLL_NPU] = &__clk_pll_hw(&pll_npu),
+ [RTD1625_CRT_PLL_VE2] = &__clk_pll_hw(&pll_ve2),
+ [RTD1625_CRT_PLL_HIFI] = &__clk_pll_hw(&pll_hifi),
+ [RTD1625_CRT_PLL_EMMC_REF] = &pll_emmc_ref.hw,
+ [RTD1625_CRT_PLL_EMMC] = &__clk_pll_mmc_hw(&pll_emmc),
+ [RTD1625_CRT_PLL_EMMC_VP0] = &pll_emmc.phase0_hw,
+ [RTD1625_CRT_PLL_EMMC_VP1] = &pll_emmc.phase1_hw,
+ [RTD1625_CRT_PLL_ACPU] = &__clk_pll_hw(&pll_acpu),
+ [RTD1625_CRT_CLK_NPU] = &clk_npu.hw,
+ [RTD1625_CRT_CLK_NPU_MIPI_CSI] = &clk_npu_mipi_csi.hw,
+ [RTD1625_CRT_CLK_MAX - 1] = NULL,
+ },
+};
+
+static const struct rtk_clk_desc rtd1625_crt_desc = {
+ .clk_data = &rtd1625_crt_hw_data,
+ .clks = rtd1625_crt_regmap_clks,
+ .num_clks = ARRAY_SIZE(rtd1625_crt_regmap_clks),
+};
+
+static int rtd1625_crt_probe(struct platform_device *pdev)
+{
+ const struct rtk_clk_desc *desc;
+
+ desc = of_device_get_match_data(&pdev->dev);
+ if (!desc)
+ return -EINVAL;
+
+ return rtk_clk_probe(pdev, desc, "crt_rst");
+}
+
+static const struct of_device_id rtd1625_crt_match[] = {
+ {.compatible = "realtek,rtd1625-crt-clk", .data = &rtd1625_crt_desc,},
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rtd1625_crt_match);
+
+static struct platform_driver rtd1625_crt_driver = {
+ .probe = rtd1625_crt_probe,
+ .driver = {
+ .name = "rtk-rtd1625-crt-clk",
+ .of_match_table = rtd1625_crt_match,
+ .suppress_bind_attrs = true,
+ },
+};
+
+static int __init rtd1625_crt_init(void)
+{
+ return platform_driver_register(&rtd1625_crt_driver);
+}
+subsys_initcall(rtd1625_crt_init);
+
+MODULE_DESCRIPTION("Realtek RTD1625 CRT Clock Controller Driver");
+MODULE_AUTHOR("Cheng-Yu Lee <cylee12@realtek.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("REALTEK_CLK");
--
2.43.0
^ permalink raw reply related
* [PATCH v9 00/12] clk / reset: realtek: Add RTD1625 clock and reset support
From: Yu-Chun Lin @ 2026-06-24 11:29 UTC (permalink / raw)
To: mturquette, sboyd, robh, krzk+dt, conor+dt, p.zabel, cylee12,
afaerber, jyanchou, bmasney
Cc: devicetree, linux-clk, linux-kernel, linux-arm-kernel,
linux-realtek-soc, james.tai, cy.huang, stanley_chang,
eleanor.lin
Hello,
This patch series adds the clock and reset controller support for Realtek's
RTD1625 SoC platform.
Because the reset controllers share the same register space with the
clock controllers on this platform, we utilize the Auxiliary Bus framework
to decouple them. The clock controllers act as the primary devices,
registering the reset controllers as auxiliary devices.
To make it easier for maintainers to review, the series has been organized
by subsystem:
1. Device Tree Bindings:
- Add bindings for the Realtek RTD1625 Clock & Reset Controllers.
2. Reset Subsystem:
- Introduce the basic Realtek reset infrastructure.
- Add the RTD1625-CRT and RTD1625-ISO platform reset drivers.
3. Clock Subsystem Infrastructure:
- Introduce a common probe, and add support for basic clocks including
PLLs, gate clocks, mux clocks, and MMC-tuned PLLs.
4. Clock Platform Drivers:
- Add the clock controller drivers for RTD1625-CRT and RTD1625-ISO.
- These drivers provide the clock sources and instantiate the
corresponding auxiliary reset devices.
Best regards,
Yu-Chun Lin
---
Changes in v9:
General:
- Split the combined clock and reset drivers into separate patches.
- Rename 'common.[ch]' to 'clk-rtk-common.[ch]' and 'reset-rtk-common.[ch]' to
avoid generic names.
- Adapt suggestions from AI review.
- Link: https://sashiko.dev/#/patchset/20260610080824.255063-1-eleanor.lin%40realtek.com.
Patch 6:
- Add 'ftbl_find_ceil_by_rate()' as a fallback in 'clk_pll_determine_rate()'.
Patch 8:
- Fix error handling in 'clk_regmap_mux_get_parent()'.
Patch 9:
- Fix potential integer overflow on 32-bit architectures in
'clk_pll_mmc_determine_rate()'.
- Add comments in 'clk_pll_mmc_set_rate()'.
v8: https://lore.kernel.org/lkml/20260610080824.255063-1-eleanor.lin@realtek.com/
v7: https://lore.kernel.org/lkml/20260508111641.3192177-1-eleanor.lin@realtek.com/
v6: https://lore.kernel.org/lkml/20260402073957.2742459-1-eleanor.lin@realtek.com/
v5: https://lore.kernel.org/lkml/20260324025332.3416977-1-eleanor.lin@realtek.com/
v4: https://lore.kernel.org/lkml/20260313081100.596224-1-eleanor.lin@realtek.com/
v3: https://lore.kernel.org/lkml/20260122110857.12995-1-eleanor.lin@realtek.com/
v2: https://lore.kernel.org/lkml/20260113112333.821-1-eleanor.lin@realtek.com/
v1: https://lore.kernel.org/lkml/20251229075313.27254-1-eleanor.lin@realtek.com/
Cheng-Yu Lee (10):
reset: Add Realtek basic reset support
reset: realtek: Add RTD1625-CRT reset driver
reset: realtek: Add RTD1625-ISO reset controller driver
clk: realtek: Introduce a common probe()
clk: realtek: Add support for phase locked loops (PLLs)
clk: realtek: Add support for gate clock
clk: realtek: Add support for mux clock
clk: realtek: Add support for MMC-tuned PLL clocks
clk: realtek: Add RTD1625-CRT clock controller driver
clk: realtek: Add RTD1625-ISO clock controller driver
Yu-Chun Lin (2):
dt-bindings: clock: Add Realtek RTD1625 Clock & Reset Controller
arm64: dts: realtek: Add clock support for RTD1625
.../bindings/clock/realtek,rtd1625-clk.yaml | 58 ++
MAINTAINERS | 20 +
arch/arm64/boot/dts/realtek/kent.dtsi | 33 +
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/realtek/Kconfig | 48 ++
drivers/clk/realtek/Makefile | 12 +
drivers/clk/realtek/clk-pll-mmc.c | 430 ++++++++++
drivers/clk/realtek/clk-pll.c | 217 +++++
drivers/clk/realtek/clk-pll.h | 60 ++
drivers/clk/realtek/clk-regmap-gate.c | 70 ++
drivers/clk/realtek/clk-regmap-gate.h | 65 ++
drivers/clk/realtek/clk-regmap-mux.c | 41 +
drivers/clk/realtek/clk-regmap-mux.h | 43 +
drivers/clk/realtek/clk-rtd1625-crt.c | 792 ++++++++++++++++++
drivers/clk/realtek/clk-rtd1625-iso.c | 151 ++++
drivers/clk/realtek/clk-rtk-common.c | 66 ++
drivers/clk/realtek/clk-rtk-common.h | 37 +
drivers/clk/realtek/freq_table.c | 57 ++
drivers/clk/realtek/freq_table.h | 18 +
drivers/reset/Kconfig | 1 +
drivers/reset/Makefile | 1 +
drivers/reset/realtek/Kconfig | 19 +
drivers/reset/realtek/Makefile | 3 +
drivers/reset/realtek/reset-rtd1625-crt.c | 187 +++++
drivers/reset/realtek/reset-rtd1625-iso.c | 99 +++
drivers/reset/realtek/reset-rtk-common.c | 90 ++
drivers/reset/realtek/reset-rtk-common.h | 29 +
.../dt-bindings/clock/realtek,rtd1625-clk.h | 164 ++++
include/dt-bindings/reset/realtek,rtd1625.h | 171 ++++
30 files changed, 2984 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/realtek,rtd1625-clk.yaml
create mode 100644 drivers/clk/realtek/Kconfig
create mode 100644 drivers/clk/realtek/Makefile
create mode 100644 drivers/clk/realtek/clk-pll-mmc.c
create mode 100644 drivers/clk/realtek/clk-pll.c
create mode 100644 drivers/clk/realtek/clk-pll.h
create mode 100644 drivers/clk/realtek/clk-regmap-gate.c
create mode 100644 drivers/clk/realtek/clk-regmap-gate.h
create mode 100644 drivers/clk/realtek/clk-regmap-mux.c
create mode 100644 drivers/clk/realtek/clk-regmap-mux.h
create mode 100644 drivers/clk/realtek/clk-rtd1625-crt.c
create mode 100644 drivers/clk/realtek/clk-rtd1625-iso.c
create mode 100644 drivers/clk/realtek/clk-rtk-common.c
create mode 100644 drivers/clk/realtek/clk-rtk-common.h
create mode 100644 drivers/clk/realtek/freq_table.c
create mode 100644 drivers/clk/realtek/freq_table.h
create mode 100644 drivers/reset/realtek/Kconfig
create mode 100644 drivers/reset/realtek/Makefile
create mode 100644 drivers/reset/realtek/reset-rtd1625-crt.c
create mode 100644 drivers/reset/realtek/reset-rtd1625-iso.c
create mode 100644 drivers/reset/realtek/reset-rtk-common.c
create mode 100644 drivers/reset/realtek/reset-rtk-common.h
create mode 100644 include/dt-bindings/clock/realtek,rtd1625-clk.h
create mode 100644 include/dt-bindings/reset/realtek,rtd1625.h
--
2.43.0
^ permalink raw reply
* [PATCH v9 08/12] clk: realtek: Add support for mux clock
From: Yu-Chun Lin @ 2026-06-24 11:29 UTC (permalink / raw)
To: mturquette, sboyd, robh, krzk+dt, conor+dt, p.zabel, cylee12,
afaerber, jyanchou, bmasney
Cc: devicetree, linux-clk, linux-kernel, linux-arm-kernel,
linux-realtek-soc, james.tai, cy.huang, stanley_chang,
eleanor.lin
In-Reply-To: <20260624112940.3475605-1-eleanor.lin@realtek.com>
From: Cheng-Yu Lee <cylee12@realtek.com>
Add a simple regmap-based clk_ops implementation for Realtek mux clocks.
The implementation supports parent selection and rate determination through
regmap-backed register access.
Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
---
Changes in v9:
- Fix error handling in 'clk_regmap_mux_get_parent()'.
---
drivers/clk/realtek/Makefile | 1 +
drivers/clk/realtek/clk-regmap-mux.c | 41 ++++++++++++++++++++++++++
drivers/clk/realtek/clk-regmap-mux.h | 43 ++++++++++++++++++++++++++++
3 files changed, 85 insertions(+)
create mode 100644 drivers/clk/realtek/clk-regmap-mux.c
create mode 100644 drivers/clk/realtek/clk-regmap-mux.h
diff --git a/drivers/clk/realtek/Makefile b/drivers/clk/realtek/Makefile
index 90c0658a83bf..3b014240a211 100644
--- a/drivers/clk/realtek/Makefile
+++ b/drivers/clk/realtek/Makefile
@@ -5,3 +5,4 @@ clk-rtk-y += clk-rtk-common.o
clk-rtk-y += clk-pll.o
clk-rtk-y += freq_table.o
clk-rtk-y += clk-regmap-gate.o
+clk-rtk-y += clk-regmap-mux.o
diff --git a/drivers/clk/realtek/clk-regmap-mux.c b/drivers/clk/realtek/clk-regmap-mux.c
new file mode 100644
index 000000000000..bdd579e1165d
--- /dev/null
+++ b/drivers/clk/realtek/clk-regmap-mux.c
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017-2026 Realtek Semiconductor Corporation
+ * Author: Cheng-Yu Lee <cylee12@realtek.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/export.h>
+#include <linux/regmap.h>
+#include "clk-regmap-mux.h"
+
+static u8 clk_regmap_mux_get_parent(struct clk_hw *hw)
+{
+ struct clk_regmap_mux *clkm = to_clk_regmap_mux(hw);
+ int num_parents = clk_hw_get_num_parents(hw);
+ u32 val;
+ int ret;
+
+ ret = regmap_read(clkm->clkr.regmap, clkm->mux_ofs, &val);
+ if (ret)
+ return 0xff;
+
+ val = (val >> clkm->shift) & clkm->mask;
+
+ return val >= num_parents ? 0xff : val;
+}
+
+static int clk_regmap_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_regmap_mux *clkm = to_clk_regmap_mux(hw);
+
+ return regmap_update_bits(clkm->clkr.regmap, clkm->mux_ofs,
+ clkm->mask << clkm->shift, (u32)index << clkm->shift);
+}
+
+const struct clk_ops rtk_clk_regmap_mux_ops = {
+ .set_parent = clk_regmap_mux_set_parent,
+ .get_parent = clk_regmap_mux_get_parent,
+ .determine_rate = __clk_mux_determine_rate,
+};
+EXPORT_SYMBOL_NS_GPL(rtk_clk_regmap_mux_ops, "REALTEK_CLK");
diff --git a/drivers/clk/realtek/clk-regmap-mux.h b/drivers/clk/realtek/clk-regmap-mux.h
new file mode 100644
index 000000000000..3ab8dc5032fc
--- /dev/null
+++ b/drivers/clk/realtek/clk-regmap-mux.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2017-2026 Realtek Semiconductor Corporation
+ * Author: Cheng-Yu Lee <cylee12@realtek.com>
+ */
+
+#ifndef __CLK_REALTEK_CLK_REGMAP_MUX_H
+#define __CLK_REALTEK_CLK_REGMAP_MUX_H
+
+#include "clk-rtk-common.h"
+
+struct clk_regmap_mux {
+ struct clk_regmap clkr;
+ int mux_ofs;
+ unsigned int mask;
+ unsigned int shift;
+};
+
+#define __clk_regmap_mux_hw(_p) __clk_regmap_hw(&(_p)->clkr)
+
+#define __CLK_REGMAP_MUX(_name, _parents, _ops, _flags, _ofs, _sft, _mask) \
+ struct clk_regmap_mux _name = { \
+ .clkr.hw.init = \
+ CLK_HW_INIT_PARENTS(#_name, _parents, _ops, _flags), \
+ .mux_ofs = _ofs, \
+ .shift = _sft, \
+ .mask = _mask, \
+ }
+
+#define CLK_REGMAP_MUX(_name, _parents, _flags, _ofs, _sft, _mask) \
+ __CLK_REGMAP_MUX(_name, _parents, &rtk_clk_regmap_mux_ops, _flags, _ofs, \
+ _sft, _mask)
+
+static inline struct clk_regmap_mux *to_clk_regmap_mux(struct clk_hw *hw)
+{
+ struct clk_regmap *clkr = to_clk_regmap(hw);
+
+ return container_of(clkr, struct clk_regmap_mux, clkr);
+}
+
+extern const struct clk_ops rtk_clk_regmap_mux_ops;
+
+#endif /* __CLK_REALTEK_CLK_REGMAP_MUX_H */
--
2.43.0
^ permalink raw reply related
* [PATCH v9 05/12] clk: realtek: Introduce a common probe()
From: Yu-Chun Lin @ 2026-06-24 11:29 UTC (permalink / raw)
To: mturquette, sboyd, robh, krzk+dt, conor+dt, p.zabel, cylee12,
afaerber, jyanchou, bmasney
Cc: devicetree, linux-clk, linux-kernel, linux-arm-kernel,
linux-realtek-soc, james.tai, cy.huang, stanley_chang,
eleanor.lin
In-Reply-To: <20260624112940.3475605-1-eleanor.lin@realtek.com>
From: Cheng-Yu Lee <cylee12@realtek.com>
Add rtk_clk_probe() to set up the shared regmap, register clock hardware,
and add the clock provider.
Additionally, if the "#reset-cells" property is present in the device tree,
it creates and registers an auxiliary device using the provided aux_name.
This allows the dedicated reset driver to bind to this device, enabling
both clock and reset drivers to share the same regmap.
Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
---
Changes in v9:
- Rename common.[ch] to clk-rtk-common.[ch].
---
MAINTAINERS | 1 +
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/realtek/Kconfig | 30 +++++++++++++
drivers/clk/realtek/Makefile | 4 ++
drivers/clk/realtek/clk-rtk-common.c | 66 ++++++++++++++++++++++++++++
drivers/clk/realtek/clk-rtk-common.h | 37 ++++++++++++++++
7 files changed, 140 insertions(+)
create mode 100644 drivers/clk/realtek/Kconfig
create mode 100644 drivers/clk/realtek/Makefile
create mode 100644 drivers/clk/realtek/clk-rtk-common.c
create mode 100644 drivers/clk/realtek/clk-rtk-common.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 3bc431a2a7d1..9cdcb333b68f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -22675,6 +22675,7 @@ L: devicetree@vger.kernel.org
L: linux-clk@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/clock/realtek*
+F: drivers/clk/realtek/*
F: drivers/reset/realtek/*
F: include/dt-bindings/clock/realtek*
F: include/dt-bindings/reset/realtek*
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index b2efbe9f6acb..8bf262dd23a9 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -519,6 +519,7 @@ source "drivers/clk/nuvoton/Kconfig"
source "drivers/clk/pistachio/Kconfig"
source "drivers/clk/qcom/Kconfig"
source "drivers/clk/ralink/Kconfig"
+source "drivers/clk/realtek/Kconfig"
source "drivers/clk/renesas/Kconfig"
source "drivers/clk/rockchip/Kconfig"
source "drivers/clk/samsung/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index a3e2862ebd7e..e226bee2d039 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -140,6 +140,7 @@ obj-$(CONFIG_COMMON_CLK_PISTACHIO) += pistachio/
obj-$(CONFIG_COMMON_CLK_PXA) += pxa/
obj-$(CONFIG_COMMON_CLK_QCOM) += qcom/
obj-y += ralink/
+obj-$(CONFIG_COMMON_CLK_REALTEK) += realtek/
obj-y += renesas/
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_COMMON_CLK_SAMSUNG) += samsung/
diff --git a/drivers/clk/realtek/Kconfig b/drivers/clk/realtek/Kconfig
new file mode 100644
index 000000000000..ed97531e321d
--- /dev/null
+++ b/drivers/clk/realtek/Kconfig
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config COMMON_CLK_REALTEK
+ tristate "Clock driver for Realtek SoCs"
+ depends on ARCH_REALTEK || COMPILE_TEST
+ default ARCH_REALTEK
+ help
+ Enable the common clock framework infrastructure for Realtek
+ system-on-chip platforms.
+
+ This provides the base support required by individual Realtek
+ clock controller drivers to expose clocks to peripheral devices.
+
+ If you have a Realtek-based platform, say Y.
+
+if COMMON_CLK_REALTEK
+
+config RTK_CLK_COMMON
+ tristate "Realtek Clock Common"
+ depends on RESET_CONTROLLER
+ select AUXILIARY_BUS
+ select MFD_SYSCON
+ select RESET_RTK_COMMON
+ help
+ Common helper code shared by Realtek clock controller drivers.
+
+ This provides utility functions and data structures used by
+ multiple Realtek clock implementations, and include integration
+ with reset controllers where required.
+
+endif
diff --git a/drivers/clk/realtek/Makefile b/drivers/clk/realtek/Makefile
new file mode 100644
index 000000000000..13000ed4ba11
--- /dev/null
+++ b/drivers/clk/realtek/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_RTK_CLK_COMMON) += clk-rtk.o
+
+clk-rtk-y += clk-rtk-common.o
diff --git a/drivers/clk/realtek/clk-rtk-common.c b/drivers/clk/realtek/clk-rtk-common.c
new file mode 100644
index 000000000000..4fd16585dbf4
--- /dev/null
+++ b/drivers/clk/realtek/clk-rtk-common.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019-2026 Realtek Semiconductor Corporation
+ * Author: Cheng-Yu Lee <cylee12@realtek.com>
+ */
+
+#include <linux/auxiliary_bus.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include "clk-rtk-common.h"
+
+static int rtk_reset_controller_register(struct device *dev, const char *aux_name,
+ struct regmap *map)
+{
+ struct auxiliary_device *adev;
+
+ if (!of_property_present(dev->of_node, "#reset-cells"))
+ return 0;
+
+ adev = devm_auxiliary_device_create(dev, aux_name, (void *)map);
+
+ if (!adev)
+ return -ENOMEM;
+
+ return 0;
+}
+
+int rtk_clk_probe(struct platform_device *pdev, const struct rtk_clk_desc *desc,
+ const char *aux_name)
+{
+ struct device *dev = &pdev->dev;
+ struct regmap *regmap;
+ int i, ret;
+
+ regmap = device_node_to_regmap(dev->of_node);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap), "failed to get regmap\n");
+
+ for (i = 0; i < desc->num_clks; i++)
+ desc->clks[i]->regmap = regmap;
+
+ for (i = 0; i < desc->clk_data->num; i++) {
+ struct clk_hw *hw = desc->clk_data->hws[i];
+
+ if (!hw)
+ continue;
+
+ ret = devm_clk_hw_register(dev, hw);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to register hw of clk%d\n", i);
+ }
+
+ ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ desc->clk_data);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to add clock provider\n");
+
+ return rtk_reset_controller_register(dev, aux_name, regmap);
+}
+EXPORT_SYMBOL_NS_GPL(rtk_clk_probe, "REALTEK_CLK");
+
+MODULE_DESCRIPTION("Realtek clock infrastructure");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/realtek/clk-rtk-common.h b/drivers/clk/realtek/clk-rtk-common.h
new file mode 100644
index 000000000000..c52fcdbff5ee
--- /dev/null
+++ b/drivers/clk/realtek/clk-rtk-common.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2016-2026 Realtek Semiconductor Corporation
+ * Author: Cheng-Yu Lee <cylee12@realtek.com>
+ */
+
+#ifndef __CLK_REALTEK_COMMON_H
+#define __CLK_REALTEK_COMMON_H
+
+#include <linux/clk-provider.h>
+
+#define __clk_regmap_hw(_p) ((_p)->hw)
+
+struct device;
+struct platform_device;
+struct regmap;
+
+struct clk_regmap {
+ struct clk_hw hw;
+ struct regmap *regmap;
+};
+
+struct rtk_clk_desc {
+ struct clk_hw_onecell_data *clk_data;
+ struct clk_regmap * const *clks;
+ size_t num_clks;
+};
+
+static inline struct clk_regmap *to_clk_regmap(struct clk_hw *hw)
+{
+ return container_of(hw, struct clk_regmap, hw);
+}
+
+int rtk_clk_probe(struct platform_device *pdev, const struct rtk_clk_desc *desc,
+ const char *aux_name);
+
+#endif /* __CLK_REALTEK_COMMON_H */
--
2.43.0
^ permalink raw reply related
* [PATCH v11] PCI: Add support for PCIe WAKE# interrupt
From: Krishna Chaitanya Chundru @ 2026-06-24 11:25 UTC (permalink / raw)
To: Rafael J. Wysocki, Len Brown, Pavel Machek, Greg Kroah-Hartman,
Danilo Krummrich, Bjorn Helgaas, Bartosz Golaszewski,
Linus Walleij, Bartosz Golaszewski, Rob Herring, Saravana Kannan,
Linus Walleij
Cc: linux-pm, linux-kernel, linux-pci, linux-gpio, quic_vbadigan,
sherry.sun, driver-core, devicetree, Manivannan Sadhasivam,
Krishna Chaitanya Chundru
According to the PCI Express specification (PCIe r7.0, Section 5.3.3.2),
two link wakeup mechanisms are defined: Beacon and WAKE#. Beacon is a
hardware-only mechanism and is invisible to software (PCIe r7.0,
Section 4.2.7.8.1). This change adds support for the WAKE# mechanism
in the PCI core.
According to the PCIe specification, multiple WAKE# signals can exist in
a system or each component in the hierarchy could share a single WAKE#
signal. In configurations involving a PCIe switch, each downstream port
(DSP) of the switch may be connected to a separate WAKE# line, allowing
each endpoint to signal WAKE# independently. From figure 5.4 in sec
5.3.3.2, WAKE# can also be terminated at the switch itself. Such topologies
are typically not described in Device Tree, therefore it is out of scope
for this series.
To support this, the WAKE# should be described in the device tree node of
the endpoint/bridge. If all endpoints share a single WAKE# line, then each
endpoint node shall describe the same WAKE# signal or a single WAKE# in
the Root Port node.
In pci_device_add(), PCI framework will search for the WAKE# in device
node. Once found, register for the wake IRQ through
dev_pm_set_dedicated_wake_irq() associates a wakeup IRQ with a device
and requests it, but the PM core keeps the IRQ disabled by default. The
IRQ is enabled by the PM core, only when the device is permitted to wake
the system, i.e. during system suspend and after runtime suspend, and
only when device wakeup is enabled.
If the same WAKE# GPIO is described in multiple device tree nodes, only the
first device that successfully registers the wake IRQ will succeed, while
subsequent registrations may fail. This limitation does not affect
functional correctness, since WAKE# is only used to bring the link to D0,
and endpoint-specific wakeup handling is resolved later through
PME detection (PME_EN is set in suspend path by PCI core by default).
When the wake IRQ fires, the wakeirq handler invokes pm_runtime_resume() to
bring the device back to an active power state, such as transitioning from
D3cold to D0. Once the device is active and the link is usable, the
endpoint may generate a PME, which is then handled by the PCI core through
PME polling or the PCIe PME service driver to complete the wakeup of the
endpoint.
WAKE# is added in dts schema and merged based on below links.
Link: https://lore.kernel.org/all/20250515090517.3506772-1-krishna.chundru@oss.qualcomm.com/
Link: https://github.com/devicetree-org/dt-schema/pull/170
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
PCIe WAKE# interrupt is needed for bringing back PCIe device state from
D3cold to D0.
This is pending from long time, there was two attempts done previously to
add WAKE# support[1], [2]. Those series tried to add support for legacy
interrupts along with WAKE#. Legacy interrupts are already available in
the latest kernel and we can ignore them. For the wake IRQ the series is
trying to use interrupts property define in the device tree.
WAKE# is added in dts schema and merged based on this patch.
https://lore.kernel.org/all/20250515090517.3506772-1-krishna.chundru@oss.qualcomm.com/
[1]: https://lore.kernel.org/all/b2b91240-95fe-145d-502c-d52225497a34@nvidia.com/T/
[2]: https://lore.kernel.org/all/20171226023646.17722-1-jeffy.chen@rock-chips.com/
---
Changes in v11:
- Add device_init_wakeup() as client driver is not expected to enable
bridge dev wakeup capability.
- Link to v10: https://patch.msgid.link/20260511-wakeirq_support-v10-0-c10af9c9eb8c@oss.qualcomm.com
Changes in v10:
- As sashiko pointed, shared irq has plenty of race conditions.
- So we are moving away from the shared IRQ patch and registering with
dedicated wake irq only, as part of wake irq the link will come to D0
as the parent controller driver will be runtime resume first and then
pme service will kick in wake up correct endpoint driver.
- Removed device_init_wakeup() since it enabling wakeup explicitly,
which is not intended as this should be set by endpoint driver only.
- Link to v9: https://lore.kernel.org/r/20260403-wakeirq_support-v9-0-1cbecf3b58d7@oss.qualcomm.com
Changes in v9:
- Call device_init_wakeup() only if
dev_pm_set_dedicated_shared_wake_irq() succeeds (Mani).
- Change the IRQ_TYPE from IRQ_TYPE_EDGE_FALLING to IRQ_TYPE_LEVEL_LOW (Mani).
- Link to v8: https://lore.kernel.org/r/20260313-wakeirq_support-v8-0-48a0a702518a@oss.qualcomm.com
Changes in v8:
- Moved the stub functions under CONFIG_OF_IRQ(mani).
- Added the description of how dev_pm_set_dedicated_shared_wake_irq()
works.
- Link to v7: https://lore.kernel.org/r/20260218-wakeirq_support-v7-0-0d4689830207@oss.qualcomm.com
Changes in v7:
- Updated the commit text (Mani).
- Couple of nits like using pci_err instead of dev_err,
use platform_pci_configure_wake(), platform_pci_remove_wake() instead
of calling directly calling pci_configure_of_wake_gpio() & pci_remove_of_wake_gpio() etc (Mani).
- Add a new fwnode_gpiod_get() API that wraps fwnode_gpiod_get_index(..0..), similar to
devm_fwnode_gpiod_get() (Mani).
- Link to v6: https://lore.kernel.org/r/20251127-wakeirq_support-v6-0-60f581f94205@oss.qualcomm.com
Changes in v6:
- Change the name to dev_pm_set_dedicated_shared_wake_irq() and make the
changes pointed by (Rafael).
- Link to v5: https://lore.kernel.org/r/20251107-wakeirq_support-v5-0-464e17f2c20c@oss.qualcomm.com
Changes in v5:
- Enable WAKE# irq only when there is wake -gpios defined in its device
tree node (Bjorn).
- For legacy bindings for direct atach check in root port if we haven't
find the wake in the endpoint node.
- Instead of hooking wake in driver bound case, do it in the framework
irrespective of the driver state (Bjorn).
- Link to v4: https://lore.kernel.org/r/20250801-wake_irq_support-v4-0-6b6639013a1a@oss.qualcomm.com
Changes in v4:
- Move wake from portdrv to core framework to endpoint (Bjorn).
- Added support for multiple WAKE# case (Bjorn). But traverse from
endpoint upstream port to root port till you get WAKE#. And use
IRQF_SHARED flag for requesting interrupts.
- Link to v3: https://lore.kernel.org/r/20250605-wake_irq_support-v3-0-7ba56dc909a5@oss.qualcomm.com
Changes in v3:
- Update the commit messages, function names etc as suggested by Mani.
- return wake_irq if returns error (Neil).
- Link to v2: https://lore.kernel.org/r/20250419-wake_irq_support-v2-0-06baed9a87a1@oss.qualcomm.com
Changes in v2:
- Move the wake irq teardown after pcie_port_device_remove
and move of_pci_setup_wake_irq before pcie_link_rcec (Lukas)
- teardown wake irq in shutdown also.
- Link to v1: https://lore.kernel.org/r/20250401-wake_irq_support-v1-0-d2e22f4a0efd@oss.qualcomm.com
To: Bjorn Helgaas <bhelgaas@google.com>
To: Rob Herring <robh@kernel.org>
To: Saravana Kannan <saravanak@kernel.org>
Cc: linux-pci@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
---
drivers/pci/of.c | 76 ++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/pci/pci.c | 11 ++++++++
drivers/pci/pci.h | 2 ++
drivers/pci/probe.c | 2 ++
drivers/pci/remove.c | 1 +
include/linux/of_pci.h | 6 ++++
include/linux/pci.h | 2 ++
7 files changed, 100 insertions(+)
diff --git a/drivers/pci/of.c b/drivers/pci/of.c
index 8b18c4ba845c..0f5effe1d702 100644
--- a/drivers/pci/of.c
+++ b/drivers/pci/of.c
@@ -7,6 +7,7 @@
#define pr_fmt(fmt) "PCI: OF: " fmt
#include <linux/cleanup.h>
+#include <linux/gpio/consumer.h>
#include <linux/irqdomain.h>
#include <linux/kernel.h>
#include <linux/pci.h>
@@ -15,6 +16,7 @@
#include <linux/of_address.h>
#include <linux/of_pci.h>
#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
#include "pci.h"
#ifdef CONFIG_PCI
@@ -586,6 +588,80 @@ int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin)
return irq_create_of_mapping(&oirq);
}
EXPORT_SYMBOL_GPL(of_irq_parse_and_map_pci);
+
+static void pci_configure_wake_irq(struct pci_dev *pdev, struct gpio_desc *wake)
+{
+ int ret, wake_irq;
+
+ wake_irq = gpiod_to_irq(wake);
+ if (wake_irq < 0) {
+ pci_err(pdev, "Failed to get wake irq: %d\n", wake_irq);
+ return;
+ }
+
+ /*
+ * dev_pm_set_dedicated_wake_irq() associates a wakeup IRQ with the
+ * device and requests it, but the PM core keeps it disabled by default.
+ * The IRQ is enabled only when the device is allowed to wake the system
+ * (during system suspend and after runtime suspend), and only if device
+ * wakeup is enabled.
+ *
+ * When the wake IRQ fires, the wakeirq handler invokes pm_runtime_resume()
+ * to bring the device back to an active power state (e.g. from D3cold to D0).
+ * Once the device is active and the link is usable, the endpoint may signal
+ * a PME, which is then handled by the PCI core (either via PME polling or the
+ * PCIe PME service driver) to wakeup particular endpoint.
+ */
+ ret = dev_pm_set_dedicated_wake_irq(&pdev->dev, wake_irq);
+ if (ret < 0) {
+ pci_err(pdev, "Failed to set WAKE# IRQ: %d\n", ret);
+ return;
+ }
+
+ ret = irq_set_irq_type(wake_irq, IRQ_TYPE_LEVEL_LOW);
+ if (ret < 0) {
+ dev_pm_clear_wake_irq(&pdev->dev);
+ pci_err(pdev, "Failed to set irq_type: %d\n", ret);
+ return;
+ }
+
+ device_init_wakeup(&pdev->dev, true);
+}
+
+void pci_configure_of_wake_gpio(struct pci_dev *dev)
+{
+ struct device_node *dn = pci_device_to_OF_node(dev);
+ struct gpio_desc *gpio;
+
+ if (!dn)
+ return;
+ /*
+ * fwnode_gpiod_get() may fail with -EBUSY (e.g. shared WAKE#), but the
+ * actual WAKE# trigger from the device would still work and the host
+ * controller driver will enable power to the topology.
+ *
+ * -EPROBE_DEFER cannot be propagated here since pci_device_add() has no
+ * retry mechanism.
+ */
+ gpio = fwnode_gpiod_get(of_fwnode_handle(dn), "wake", GPIOD_IN, NULL);
+ if (!IS_ERR(gpio)) {
+ dev->wake = gpio;
+ pci_configure_wake_irq(dev, gpio);
+ }
+}
+
+void pci_remove_of_wake_gpio(struct pci_dev *dev)
+{
+ struct device_node *dn = pci_device_to_OF_node(dev);
+
+ if (!dn)
+ return;
+
+ device_init_wakeup(&dev->dev, false);
+ dev_pm_clear_wake_irq(&dev->dev);
+ gpiod_put(dev->wake);
+ dev->wake = NULL;
+}
#endif /* CONFIG_OF_IRQ */
static int pci_parse_request_of_pci_ranges(struct device *dev,
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index d34266651ad0..9d9777fe099a 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -17,6 +17,7 @@
#include <linux/lockdep.h>
#include <linux/msi.h>
#include <linux/of.h>
+#include <linux/of_pci.h>
#include <linux/pci.h>
#include <linux/pm.h>
#include <linux/slab.h>
@@ -1123,6 +1124,16 @@ static inline bool platform_pci_bridge_d3(struct pci_dev *dev)
return acpi_pci_bridge_d3(dev);
}
+void platform_pci_configure_wake(struct pci_dev *dev)
+{
+ pci_configure_of_wake_gpio(dev);
+}
+
+void platform_pci_remove_wake(struct pci_dev *dev)
+{
+ pci_remove_of_wake_gpio(dev);
+}
+
/**
* pci_update_current_state - Read power state of given device and cache it
* @dev: PCI device to handle.
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index e8ad27abb1cf..8633c093385c 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -284,6 +284,8 @@ void pci_msix_init(struct pci_dev *dev);
bool pci_bridge_d3_possible(struct pci_dev *dev);
void pci_bridge_d3_update(struct pci_dev *dev);
int pci_bridge_wait_for_secondary_bus(struct pci_dev *dev, char *reset_type);
+void platform_pci_configure_wake(struct pci_dev *dev);
+void platform_pci_remove_wake(struct pci_dev *dev);
static inline bool pci_bus_rrs_vendor_id(u32 l)
{
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index b63cd0c310bc..143b0bd35b3c 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -2775,6 +2775,8 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
/* Establish pdev->tsm for newly added (e.g. new SR-IOV VFs) */
pci_tsm_init(dev);
+ platform_pci_configure_wake(dev);
+
pci_npem_create(dev);
pci_doe_sysfs_init(dev);
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index e9d519993853..d781b41e57c4 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -35,6 +35,7 @@ static void pci_destroy_dev(struct pci_dev *dev)
if (pci_dev_test_and_set_removed(dev))
return;
+ platform_pci_remove_wake(dev);
pci_doe_sysfs_teardown(dev);
pci_npem_remove(dev);
diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
index 29658c0ee71f..649fe8eafcfa 100644
--- a/include/linux/of_pci.h
+++ b/include/linux/of_pci.h
@@ -30,12 +30,18 @@ static inline void of_pci_check_probe_only(void) { }
#if IS_ENABLED(CONFIG_OF_IRQ)
int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin);
+void pci_configure_of_wake_gpio(struct pci_dev *dev);
+void pci_remove_of_wake_gpio(struct pci_dev *dev);
#else
static inline int
of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin)
{
return 0;
}
+
+static inline void pci_configure_of_wake_gpio(struct pci_dev *dev) { }
+
+static inline void pci_remove_of_wake_gpio(struct pci_dev *dev) { }
#endif
#endif
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 2c4454583c11..4289b60dcc83 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -588,6 +588,8 @@ struct pci_dev {
/* These methods index pci_reset_fn_methods[] */
u8 reset_methods[PCI_NUM_RESET_METHODS]; /* In priority order */
+ struct gpio_desc *wake; /* Holds WAKE# gpio */
+
#ifdef CONFIG_PCIE_TPH
u16 tph_cap; /* TPH capability offset */
u8 tph_mode; /* TPH mode */
---
base-commit: 840ef6c78e6a2f694b578ecb9063241c992aaa9e
change-id: 20251104-wakeirq_support-f54c4baa18c5
Best regards,
--
Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
^ permalink raw reply related
* Re: [PATCH 2/2] arm64: dts: socfpga: agilex7-gen2: Add initial device tree
From: Nazle Asmade, Muhammad Nazim Amirul @ 2026-06-24 11:22 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: dinguyen@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
In-Reply-To: <fa79f704-6c04-4052-9625-d371976c14f7@kernel.org>
On 24/6/2026 6:26 pm, Krzysztof Kozlowski wrote:
> On 24/06/2026 12:17, Nazle Asmade, Muhammad Nazim Amirul wrote:
>>> SoC without any interface, serial or storage or network, is close to
>>> useless one.
>>>
>>> I don't see a point in having it in mainline. Serial is usually ABSOLUTE
>>> minimum.
>>>
>>> Best regards,
>>> Krzysztof
>>>
>> Hi Krzysztof,
>>
>> Thank you for the review and fast response!
>>
>> I ran both dt_binding_check and dtbs_check (with CHECK_DTBS=y) locally —
>> both passed without errors. Could you clarify which specific test you
>> believe is failing?
>
> I would expect simple-bus schema warning or W=1, because node is placed
> outside of soc@, but maybe there is no such.
> >>
>> Regarding "MMIO goes to MMIO" — are you referring to the GIC
>
> Comments are placed in very specific and intentional place. Please read
> guides how mailing list in-line review works before posting patches.
Apologies on this matter.>
>> (interrupt-controller@7000000) being placed at the root level instead of
>> under the soc bus node?
>>
>> Regarding the serial console — the platform clock driver is not yet
>> upstream, so the UART depends on clkmgr. Would adding the UART with
>> clock-frequency be acceptable as an interim solution?
>
> Add complete working serial. Why can't you use fixed placeholder clock?
> There are probably multiple ways to solve it, not necessary
> clock-frequency and I do not even remember if clock-frequency is allowed.
Will add a UART node with a fixed-clock placeholder>
> But if you cannot bring serial, then my comment stays valid: this is
> unusable upstream thus is not ready to be posted and merged.
>
> Best regards,
> Krzysztof
Sorry I had to reply again to this thread due to not including all
recipient just now. Also one thing to mention, this patch actually a V1
version and latest should be v2 but it is just a device renaming change
on the latest one so the comment still valid. Will send out v3 once it
is ready! Thanks Krzysztof!
BR,
Nazim
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox