From: sashiko-bot@kernel.org
To: "Alexander Stein" <alexander.stein@ew.tq-group.com>
Cc: imx@lists.linux.dev, devicetree@vger.kernel.org, robh@kernel.org,
conor+dt@kernel.org, Frank.Li@kernel.org
Subject: Re: [PATCH 2/5] arm64: dts: imx8qxp: Add display controller subsystem
Date: Tue, 13 Oct 2026 11:29:55 +0000 [thread overview]
Message-ID: <sashiko-outbox-169627@kernel.org> (raw)
In-Reply-To: <20261013111737.998282-3-alexander.stein@ew.tq-group.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] arm64: dts: Missing power-domains and compatible override for dc0_irqsteer
--
commit ae70e9d2f5935bf44872ed0bd30be554653b06e0
Author: Liu Ying <victor.liu@nxp.com>
arm64: dts: imx8qxp: Add display controller subsystem
Add display controller subsystem in i.MX8qxp SoC.
> diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dc0.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dc0.dtsi
> new file mode 100644
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dc0.dtsi
[ ... ]
> +dc0_subsys: bus@56000000 {
[ ... ]
> + dc0_irqsteer: interrupt-controller@56000000 {
> + compatible = "fsl,imx-irqsteer";
> + reg = <0x56000000 0x1000>;
> + interrupt-controller;
> + interrupt-parent = <&gic>;
> + #interrupt-cells = <1>;
[ ... ]
> + clocks = <&dc0_lis_lpcg IMX_LPCG_CLK_4>;
> + clock-names = "ipg";
> + fsl,channel = <0>;
> + fsl,num-irqs = <512>;
> + };
[Severity: Medium]
Is the dc0_irqsteer node missing a power-domains property?
If it lacks power-domains = <&pd IMX_SC_R_DC_0>;, could this trigger a bus
fault (SError) during boot or suspend/resume cycles if the irqsteer driver
accesses its registers when the IMX_SC_R_DC_0 power domain is off?
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-dc.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-dc.dtsi
> new file mode 100644
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-dc.dtsi
> @@ -0,0 +1,236 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2024 NXP
> + */
> +
> +&dc0 {
> + compatible = "fsl,imx8qxp-dc";
> +};
[Severity: Medium]
Should there be an override for &dc0_irqsteer in this file to set its
SoC-specific compatible string?
For example, setting compatible = "fsl,imx8qxp-irqsteer", "fsl,imx-irqsteer";
here would ensure the node matches correctly. Omitting the SoC-specific
compatible string might mask the missing power domain violation from
dtbs_check and prevent SoC-specific driver quirks from applying.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261013111737.998282-1-alexander.stein@ew.tq-group.com?part=2
next prev parent reply other threads:[~2026-10-13 11:29 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-13 11:17 [PATCH 0/5] LVDS support for TQMa8Xx Alexander Stein
2026-10-13 11:17 ` [PATCH 1/5] dt-bindings: firmware: imx: Add SCU controlled display pixel link nodes Alexander Stein
2026-10-13 11:17 ` [PATCH 2/5] arm64: dts: imx8qxp: Add display controller subsystem Alexander Stein
2026-10-13 11:29 ` sashiko-bot [this message]
2026-10-13 14:05 ` Alexander Stein
2026-10-13 11:17 ` [PATCH 3/5] arm64: dts: imx8qxp: Add MIPI-LVDS combo subsystems Alexander Stein
2026-10-13 11:17 ` [PATCH 4/5] arm64: dts: freescale: Add LVDS overlays for TQMa8Xx Alexander Stein
2026-10-13 11:28 ` sashiko-bot
2026-10-13 13:03 ` Alexander Stein
2026-10-13 11:17 ` [PATCH 5/5] arm64: dts: freescale: Add dual-channel LVDS overlay " Alexander Stein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-169627@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=Frank.Li@kernel.org \
--cc=alexander.stein@ew.tq-group.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=imx@lists.linux.dev \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox