Devicetree
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Ali Rouhi" <arouhi@sitime.com>
Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	robh@kernel.org, conor+dt@kernel.org
Subject: Re: [PATCH net-next v15 10/13] dpll: sit9531x: implement output pin state on a DPLL
Date: Wed, 11 Nov 2026 20:26:54 +0000	[thread overview]
Message-ID: <sashiko-outbox-209661@kernel.org> (raw)
In-Reply-To: <20261110202607.55744-11-arouhi@sitime.com>

Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Medium] dpll: sit9531x: missing unmute rollback in
  sit9531x_output_hiz_write()
--

commit 4e6433aa7f8c3d99e32f4350064261aad1b40ccd
Author: Oleg Zadorozhnyi <Oleg.Zadorozhnyi@devoxsoftware.com>

dpll: sit9531x: implement output pin state on a DPLL

This commit implements state_on_dpll_get and state_on_dpll_set for output
pins by forcing or releasing the output slot's Hi-Z override registers and
registers routed output pins with the DPLL core.

> diff --git a/drivers/dpll/sit9531x/core.c b/drivers/dpll/sit9531x/core.c
> index c7ab33993c288..458de502bc8f7 100644
> --- a/drivers/dpll/sit9531x/core.c
> +++ b/drivers/dpll/sit9531x/core.c

[ ... ]

> +/*
> + * Mute or unmute every Hi-Z pair of a slot. Caller must already be in the
> + * programming state.
> + */
> +static int sit9531x_output_hiz_write(struct sit9531x_dev *sitdev, u8 slot,
> +				     bool mute)
> +{
> +	u8 mask[SIT9531X_HIZ_PAIRS], state[SIT9531X_HIZ_PAIRS];
> +	struct sit9531x_hiz_pair p[SIT9531X_HIZ_PAIRS];
> +	int i, rc, undo_rc;
> +
> +	sit9531x_output_get_hiz_regs(slot, p);
> +
> +	if (!mute) {
> +		for (i = 0; i < SIT9531X_HIZ_PAIRS; i++) {
> +			rc = sit9531x_hiz_set_bit(sitdev, p[i].mask, p[i].bit,
> +						  false);
> +			if (rc)
> +				return rc;
> +		}
> +		return 0;
> +	}

[Severity: Medium]
Should the !mute loop roll back already-cleared p[i].mask bits if a later
sit9531x_hiz_set_bit() call fails, like the mute branch below does?

sit9531x_output_enable() still runs sit9531x_prg_commit() on error.  For a
CMOS output where clearing SIT9531X_HIZ_CMOS_P succeeds and clearing
SIT9531X_HIZ_CMOS_N fails, the commit leaves OutP driving and OutN forced to
Hi-Z, and sit9531x_output_forced_hiz() then marks the pin enabled because
only one pad is muted.  sit9531x_dpll_output_pin_state_on_dpll_set() fails
the request but sends a change notification reporting the half-unmuted pin
as DPLL_PIN_STATE_CONNECTED.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261110202607.55744-1-arouhi@sitime.com?part=10

  reply	other threads:[~2026-11-11 20:26 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-10 20:26 [PATCH net-next v15 00/13] dpll: add SiTime SiT9531x DPLL clock driver Ali Rouhi
2026-11-10 20:26 ` [PATCH net-next v15 01/13] dpll: omit pin phase attributes the driver has no value for Ali Rouhi
2026-11-11 15:35   ` Ivan Vecera
2026-11-10 20:26 ` [PATCH net-next v15 02/13] dt-bindings: vendor-prefixes: add SiTime Corporation Ali Rouhi
2026-11-10 20:26 ` [PATCH net-next v15 04/13] dpll: add basic SiTime SiT9531x support Ali Rouhi
2026-11-10 20:26 ` [PATCH net-next v15 03/13] dt-bindings: dpll: add SiTime SiT95316 clock generator Ali Rouhi
2026-11-10 20:26 ` [PATCH net-next v15 05/13] dpll: sit9531x: read DPLL types and pin properties from system firmware Ali Rouhi
2026-11-10 20:26 ` [PATCH net-next v15 06/13] dpll: sit9531x: register DPLL devices and pins Ali Rouhi
2026-11-10 20:26 ` [PATCH net-next v15 07/13] dpll: sit9531x: implement input pin state on a DPLL Ali Rouhi
2026-11-11 20:26   ` sashiko-bot
2026-11-10 20:26 ` [PATCH net-next v15 08/13] dpll: sit9531x: add support to get and set priority on input pins Ali Rouhi
2026-11-10 20:26 ` [PATCH net-next v15 09/13] dpll: sit9531x: add support to get and set frequency on pins Ali Rouhi
2026-11-10 20:26 ` [PATCH net-next v15 10/13] dpll: sit9531x: implement output pin state on a DPLL Ali Rouhi
2026-11-11 20:26   ` sashiko-bot [this message]
2026-11-10 20:26 ` [PATCH net-next v15 11/13] dpll: sit9531x: add support to adjust output phase Ali Rouhi
2026-11-11 20:26   ` sashiko-bot
2026-11-10 20:26 ` [PATCH net-next v15 12/13] dpll: sit9531x: add support to get phase offset on the connected input pin Ali Rouhi
2026-11-11 20:26   ` sashiko-bot
2026-11-10 20:26 ` [PATCH net-next v15 13/13] dpll: sit9531x: model the inter-PLL sync line as a pair of pins Ali Rouhi
2026-11-11 20:26   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-209661@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=arouhi@sitime.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox