From: sashiko-bot@kernel.org
To: "Ronald Claveau" <linux-kernel-dev@aliel.fr>
Cc: linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
robh@kernel.org, conor+dt@kernel.org, neil.armstrong@linaro.org
Subject: Re: [PATCH 4/7] arm64: dts: amlogic: g12: Add ranges to periphs pinctrl node
Date: Sun, 15 Nov 2026 22:37:04 +0000 [thread overview]
Message-ID: <sashiko-outbox-215882@kernel.org> (raw)
In-Reply-To: <20261115-fix-amlogic-dt-warnings-v1-4-94cbd67a32ea@aliel.fr>
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Low] arm64: dts: amlogic: commit subject and message mismatch with
modified nodes
--
commit d018b851d0b76ba5915a6bfa884a1b1c4be5d03e
Author: Ronald Claveau <linux-kernel-dev@aliel.fr>
> arm64: dts: amlogic: g12: Add ranges to periphs pinctrl node
>
> Building the amlogic DTBs with W=1 reports the following warnings
> for the periphs pinctrl node:
>
> meson-g12-common.dtsi:271.33-1554.7: Warning (unit_address_vs_reg):
> /soc/bus@ff600000/bus@34400/pinctrl@40: node has a unit name, but no
> reg or ranges property
> meson-g12-common.dtsi:1768.27-2040.6: Warning (unit_address_vs_reg):
> /soc/bus@ff800000/pinctrl@14: node has a unit name, but no reg
> or ranges property
> meson-g12-common.dtsi:271.33-1554.7: Warning (simple_bus_reg):
> /soc/bus@ff600000/bus@34400/pinctrl@40: missing or empty reg/ranges
> property
> meson-g12-common.dtsi:1768.27-2040.6: Warning (simple_bus_reg):
> /soc/bus@ff800000/pinctrl@14: missing or empty reg/ranges property
> meson-g12-common.dtsi:2239.23-2279.6: Warning
> (avoid_unnecessary_addr_size): /soc/bus@ffd00000/dsi@7000:
> unnecessary #address-cells/#size-cells without "ranges", "dma-ranges"
> or child "reg" or "ranges" property
>
> The pinctrl node has no reg property of its own, and its empty
> "ranges;" does not describe which address space is translated to the
> children
>
> /soc/bus@ffd00000/dsi@7000: unnecessary #address-cells/#size-cells
> without "ranges", "dma-ranges" or child "reg" or "ranges" property
>
> The DSI controller node has no child nodes with a reg property,
> so #address-cells and #size-cells serve no purpose. Remove them.
>
> Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
[Severity: Low]
This isn't a bug, but the commit subject and opening sentence only mention
the periphs_pinctrl node (pinctrl@40), whereas the patch also adds ranges to
ao_pinctrl (pinctrl@14) and removes #address-cells and #size-cells from the
unrelated mipi_dsi node (dsi@7000).
Should the mipi_dsi change be split into a separate commit (or reflected in
the subject alongside ao_pinctrl), and the duplicated dsi@7000 warning text
after the unpunctuated sentence ("...translated to the children") be cleaned
up?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261115-fix-amlogic-dt-warnings-v1-0-94cbd67a32ea@aliel.fr?part=4
next prev parent reply other threads:[~2026-11-15 22:37 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-15 22:29 [PATCH 0/7] arm64: dts: amlogic: Fix dtc warnings with W=1 Ronald Claveau via B4 Relay
2026-11-15 22:29 ` [PATCH 1/7] arm64: dts: amlogic: t7: Add ranges to periphs pinctrl node Ronald Claveau via B4 Relay
2026-11-15 22:29 ` [PATCH 2/7] arm64: dts: amlogic: a1: " Ronald Claveau via B4 Relay
2026-11-15 22:29 ` [PATCH 3/7] arm64: dts: amlogic: axg: " Ronald Claveau via B4 Relay
2026-11-15 22:38 ` sashiko-bot
2026-11-15 22:29 ` [PATCH 4/7] arm64: dts: amlogic: g12: " Ronald Claveau via B4 Relay
2026-11-15 22:37 ` sashiko-bot [this message]
2026-11-15 22:29 ` [PATCH 5/7] arm64: dts: amlogic: gxbb: " Ronald Claveau via B4 Relay
2026-11-15 22:29 ` [PATCH 6/7] arm64: dts: amlogic: gxl: " Ronald Claveau via B4 Relay
2026-11-15 22:29 ` [PATCH 7/7] arm64: dts: amlogic: s4: " Ronald Claveau via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-215882@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel-dev@aliel.fr \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox