* [PATCH net-next 3/4] net: enetc: add i.MX952 ENETC support
2026-11-04 9:22 [PATCH net-next 0/4] net: enetc: add i.MX952 NETC v4.6 support xiaoning.wang
@ 2026-11-04 9:22 ` xiaoning.wang
2026-11-05 9:27 ` sashiko-bot
0 siblings, 1 reply; 13+ messages in thread
From: xiaoning.wang @ 2026-11-04 9:22 UTC (permalink / raw)
To: netdev
Cc: Claudiu Manoil, Vladimir Oltean, Wei Fang, Andrew Lunn,
David S . Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Richard Cochran,
imx, devicetree, linux-kernel, Clark Wang
From: Clark Wang <xiaoning.wang@nxp.com>
The driver gets the driver data of ENETC based on the IP revision, so
the ENETC PF and VF fail to probe on i.MX952 because its revision(v4.6)
is not present in enetc_info.
Add the v4.6 entries to enetc_info.
Unlike i.MX95 and i.MX94, the NETC system clock of i.MX952 is 133MHz
rather than 333MHz. So add the new PF and VF driver data with
ENETC_CLK_133M for ENETC v4.6.
In addition, similar to i.MX94, the PTP timer is function 1 of device
0 on the PCIe bus of ENETC 0, so update enetc_get_phc_index_by_pdev()
to support getting the PHC index for ENETC v4.6.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
---
drivers/net/ethernet/freescale/enetc/enetc.c | 23 +++++++++++++++++++
.../ethernet/freescale/enetc/enetc_ethtool.c | 1 +
.../net/ethernet/freescale/enetc/enetc_hw.h | 2 ++
3 files changed, 26 insertions(+)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
index c6571b5cc842..4ef387578b1e 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
@@ -3812,6 +3812,14 @@ static const struct enetc_drvdata enetc4_pf_data = {
.eth_ops = &enetc4_pf_ethtool_ops,
};
+static const struct enetc_drvdata enetc4_6_pf_data = {
+ .sysclk_freq = ENETC_CLK_133M,
+ .tx_csum = true,
+ .max_frags = ENETC4_MAX_SKB_FRAGS,
+ .pmac_offset = ENETC4_PMAC_OFFSET,
+ .eth_ops = &enetc4_pf_ethtool_ops,
+};
+
static const struct enetc_drvdata enetc4_ppm_data = {
.sysclk_freq = ENETC_CLK_333M,
.tx_csum = true,
@@ -3832,6 +3840,13 @@ static const struct enetc_drvdata enetc4_vf_data = {
.eth_ops = &enetc_vf_ethtool_ops,
};
+static const struct enetc_drvdata enetc4_6_vf_data = {
+ .sysclk_freq = ENETC_CLK_133M,
+ .tx_csum = true,
+ .max_frags = ENETC4_MAX_SKB_FRAGS,
+ .eth_ops = &enetc_vf_ethtool_ops,
+};
+
static const struct enetc_platform_info enetc_info[] = {
{ .revision = ENETC_REV_1_0,
.dev_id = ENETC_DEV_ID_PF,
@@ -3862,6 +3877,14 @@ static const struct enetc_platform_info enetc_info[] = {
.dev_id = NXP_ENETC_VF_DEV_ID,
.data = &enetc4_vf_data,
},
+ { .revision = ENETC_REV_4_6,
+ .dev_id = NXP_ENETC_PF_DEV_ID,
+ .data = &enetc4_6_pf_data,
+ },
+ { .revision = ENETC_REV_4_6,
+ .dev_id = NXP_ENETC_VF_DEV_ID,
+ .data = &enetc4_6_vf_data,
+ },
};
int enetc_get_driver_data(struct enetc_si *si)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
index 7965dfd06f5f..3c6c6fc0ab8c 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
@@ -1149,6 +1149,7 @@ static int enetc_get_phc_index_by_pdev(struct enetc_si *si)
devfn = PCI_DEVFN(24, 0);
break;
case ENETC_REV_4_3:
+ case ENETC_REV_4_6:
devfn = PCI_DEVFN(0, 1);
break;
default:
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_hw.h b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
index 2c9d9042eb0b..339691cdf44f 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
@@ -414,6 +414,7 @@ enum enetc_bdr_type {TX, RX};
#define ENETC_REV_1_0 0x0100
#define ENETC_REV_4_1 0X0401
#define ENETC_REV_4_3 0x0403
+#define ENETC_REV_4_6 0x0406
#define ENETC_G_EIPBRR1 0x0bfc
#define ENETC_G_EPFBLPR(n) (0xd00 + 4 * (n))
@@ -1050,6 +1051,7 @@ struct enetc_cbd {
#define ENETC_CLK_400M 400000000ULL
#define ENETC_CLK_333M 333000000ULL
+#define ENETC_CLK_133M 133000000ULL
static inline u32 enetc_cycles_to_usecs(u32 cycles, u64 clk_freq)
{
--
2.43.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH net-next 3/4] net: enetc: add i.MX952 ENETC support
2026-11-04 9:22 ` [PATCH net-next 3/4] net: enetc: add i.MX952 ENETC support xiaoning.wang
@ 2026-11-05 9:27 ` sashiko-bot
0 siblings, 0 replies; 13+ messages in thread
From: sashiko-bot @ 2026-11-05 9:27 UTC (permalink / raw)
To: xiaoning.wang; +Cc: imx, devicetree, robh, conor+dt, Frank.Li
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] net: enetc: wrong PCI bus lookup in enetc_get_phc_index_by_pdev() on i.MX952
--
commit 1b7e801c5a0f70e9aaf3045a92e91874399e99b2
Author: Clark Wang <xiaoning.wang@nxp.com>
net: enetc: add i.MX952 ENETC support
This commit adds i.MX952 (ENETC v4.6) PF and VF driver data with a 133MHz
NETC system clock to enetc_info, and updates enetc_get_phc_index_by_pdev()
to look up the PHC index for ENETC_REV_4_6.
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
> index 7965dfd06f5f6..3c6c6fc0ab8cf 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
> +++ b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
> @@ -1149,6 +1149,7 @@ static int enetc_get_phc_index_by_pdev(struct enetc_si *si)
> devfn = PCI_DEVFN(24, 0);
> break;
> case ENETC_REV_4_3:
> + case ENETC_REV_4_6:
> devfn = PCI_DEVFN(0, 1);
> break;
[Severity: Medium]
When enetc_get_ts_info() -> enetc_get_phc_index() falls back to
enetc_get_phc_index_by_pdev() (such as on an SR-IOV VF where
si->pdev->dev.of_node is NULL, or on a PF when the optional ptp-timer
phandle is omitted from the Device Tree), it looks up the timer device on
the caller's own PCI domain and bus (si->pdev->bus):
drivers/net/ethernet/freescale/enetc/enetc_ethtool.c:enetc_get_phc_index_by_pdev() {
struct pci_bus *bus = si->pdev->bus;
...
timer_pdev = pci_get_domain_bus_and_slot(pci_domain_nr(bus),
bus->number, devfn);
if (!timer_pdev)
return -1;
}
On i.MX94 (ENETC_REV_4_3), ENETC 0/1/2 reside on PCIe bus 1 alongside
Timer 1 (0x101) and ENETC 3 resides on PCIe bus 0 alongside Timer 0 (0x1),
so every ENETC has a timer at PCI_DEVFN(0, 1) on its own si->pdev->bus.
On i.MX952 (ENETC_REV_4_6), however, ENETC 0 and ENETC 1 are on different
PCIe buses:
drivers/net/ethernet/freescale/enetc/netc_blk_ctrl.c:
#define IMX952_ENETC0_BUS_DEVFN 0x0
#define IMX952_ENETC1_BUS_DEVFN 0x100
Since the PTP timer on i.MX952 is at function 1 of device 0 on the PCIe bus
of ENETC 0 (bus 0), won't calling enetc_get_phc_index_by_pdev() for ENETC 1
or its VFs search for PCI_DEVFN(0, 1) on ENETC 1's bus (bus 1) instead of
bus 0 and fail to find timer_pdev, causing enetc_get_ts_info() to return -1
for phc_index and fall back to software timestamping?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261104092217.1730351-1-xiaoning.wang@oss.nxp.com?part=3
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH net-next 0/4] net: enetc: Add i.MX952 support
@ 2026-11-18 10:37 Frieder Schrempf
2026-11-18 10:37 ` [PATCH net-next 1/4] dt-bindings: net: nxp,netc-blk-ctrl: add i.MX952 compatible Frieder Schrempf
` (4 more replies)
0 siblings, 5 replies; 13+ messages in thread
From: Frieder Schrempf @ 2026-11-18 10:37 UTC (permalink / raw)
To: Claudiu Manoil, Vladimir Oltean, Wei Fang, Clark Wang,
Andrew Lunn, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Richard Cochran
Cc: imx, netdev, devicetree, linux-kernel, Frieder Schrempf
This adds support for the NETC Ethernet controller on the i.MX952 SoC.
i.MX952 has two ENETC instances (IP revision 4.6), each on its own
PCIe bus. ENETC0 shares bus 0 with the NETC timer and the central EMDIO,
ENETC1 sits alone on bus 1. The NETC system clock runs at 133 MHz,
compared to 333 MHz on i.MX95.
The patches are ported from NXP's lf-6.18.y vendor kernel. The device
tree changes for imx952.dtsi and the i.MX952 EVK will be sent separately
to the i.MX tree.
Tested on the i.MX952 EVK with ENETC0 (RGMII): the link works,
hardware timestamping is available and the PHC runs at the correct
rate. ENETC1 is untested as it needs an add-on board.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
Clark Wang (2):
net: enetc: netc_blk_ctrl: add i.MX952 support
ptp: netc: use 133 MHz system clock on i.MX952
Frieder Schrempf (1):
dt-bindings: net: nxp,netc-blk-ctrl: add i.MX952 compatible
Wei Fang (1):
net: enetc: add i.MX952 ENETC support
.../devicetree/bindings/net/nxp,netc-blk-ctrl.yaml | 1 +
drivers/net/ethernet/freescale/enetc/enetc.c | 23 +++++++
.../net/ethernet/freescale/enetc/enetc_ethtool.c | 1 +
drivers/net/ethernet/freescale/enetc/enetc_hw.h | 2 +
.../net/ethernet/freescale/enetc/netc_blk_ctrl.c | 73 ++++++++++++++++++++++
drivers/ptp/ptp_netc.c | 7 ++-
6 files changed, 106 insertions(+), 1 deletion(-)
---
base-commit: d6816d9a93b66a12bf01e10037e377f3333ad6cc
change-id: 20261118-imx952-enetc-bd2bc331e1b5
Best regards,
--
Frieder Schrempf <frieder.schrempf@kontron.de>
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH net-next 1/4] dt-bindings: net: nxp,netc-blk-ctrl: add i.MX952 compatible
2026-11-18 10:37 [PATCH net-next 0/4] net: enetc: Add i.MX952 support Frieder Schrempf
@ 2026-11-18 10:37 ` Frieder Schrempf
2026-11-18 17:43 ` Conor Dooley
2026-11-18 10:37 ` [PATCH net-next 2/4] net: enetc: netc_blk_ctrl: add i.MX952 support Frieder Schrempf
` (3 subsequent siblings)
4 siblings, 1 reply; 13+ messages in thread
From: Frieder Schrempf @ 2026-11-18 10:37 UTC (permalink / raw)
To: Claudiu Manoil, Vladimir Oltean, Wei Fang, Clark Wang,
Andrew Lunn, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Richard Cochran
Cc: imx, netdev, devicetree, linux-kernel, Frieder Schrempf
From: Frieder Schrempf <frieder.schrempf@kontron.de>
The NETC on i.MX952 has the same IERB, PRB and NETCMIX register blocks
as on i.MX95, but a different set of ENETC instances and a different
NETCMIX link configuration. Add a dedicated compatible string for it.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml b/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml
index deea4fd73d767..c443fe0b4693f 100644
--- a/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml
@@ -23,6 +23,7 @@ properties:
enum:
- nxp,imx94-netc-blk-ctrl
- nxp,imx95-netc-blk-ctrl
+ - nxp,imx952-netc-blk-ctrl
reg:
maxItems: 3
--
2.56.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH net-next 2/4] net: enetc: netc_blk_ctrl: add i.MX952 support
2026-11-18 10:37 [PATCH net-next 0/4] net: enetc: Add i.MX952 support Frieder Schrempf
2026-11-18 10:37 ` [PATCH net-next 1/4] dt-bindings: net: nxp,netc-blk-ctrl: add i.MX952 compatible Frieder Schrempf
@ 2026-11-18 10:37 ` Frieder Schrempf
2026-11-18 13:51 ` Andrew Lunn
2026-11-18 10:37 ` [PATCH net-next 3/4] net: enetc: add i.MX952 ENETC support Frieder Schrempf
` (2 subsequent siblings)
4 siblings, 1 reply; 13+ messages in thread
From: Frieder Schrempf @ 2026-11-18 10:37 UTC (permalink / raw)
To: Claudiu Manoil, Vladimir Oltean, Wei Fang, Clark Wang,
Andrew Lunn, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Richard Cochran
Cc: imx, netdev, devicetree, linux-kernel, Frieder Schrempf
From: Clark Wang <xiaoning.wang@nxp.com>
Add NETCMIX support for i.MX952 platform. i.MX952 has two ENETC
instances, each on its own PCIe bus: ENETC0 at bus 0 devfn 0 and ENETC1
at bus 1 devfn 0. Their link MII protocol is configured through the
same NETCMIX register as on i.MX95.
The i.MX952 RM describes E0TXHPTBCR and E0TXLPTBCR as the byte-credit
limits for the ENETC transmit datapath. Both ENETC0 transmit
byte-credit registers reset to 0x5dc, which matches the RM example for
a 1536-byte maximum frame size. That is too small once jumbo frames are
enabled when the NETCMIX root clock is 133 MHz: the credit counter is
exhausted too early, which reduces transmit throughput. Program them to
0xc35, the same as port 1, during IERB initialization.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
[fs: squashed NXP a9dd7adc7e44, 68415a57f31e]
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
.../net/ethernet/freescale/enetc/netc_blk_ctrl.c | 73 ++++++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/drivers/net/ethernet/freescale/enetc/netc_blk_ctrl.c b/drivers/net/ethernet/freescale/enetc/netc_blk_ctrl.c
index 658fab31e9ed7..6e3098a0a43ee 100644
--- a/drivers/net/ethernet/freescale/enetc/netc_blk_ctrl.c
+++ b/drivers/net/ethernet/freescale/enetc/netc_blk_ctrl.c
@@ -67,6 +67,8 @@
#define IERB_EMDIOFAUXR 0x344
#define IERB_T0FAUXR 0x444
#define IERB_ETBCR(a) (0x300c + 0x100 * (a))
+#define IERB_ETXHPTBCR(a) (0x3070 + 0x100 * (a))
+#define IERB_ETXLPTBCR(a) (0x3074 + 0x100 * (a))
#define IERB_LBCR(a) (0x1010 + 0x40 * (a))
#define LBCR_MDIO_PHYAD_PRTAD(addr) (((addr) & 0x1f) << 8)
@@ -89,6 +91,10 @@
#define IMX94_ENETC1_LINK 4
#define IMX94_ENETC2_LINK 5
+#define IMX952_ENETC0_BUS_DEVFN 0x0
+#define IMX952_ENETC1_BUS_DEVFN 0x100
+#define IMX952_BYTE_CREDIT 0xc35
+
#define NETC_ENETC_ID(a) (a)
#define NETC_TIMER_ID(a) (a)
@@ -368,6 +374,56 @@ static int imx94_netcmix_init(struct platform_device *pdev)
return 0;
}
+static int imx952_netcmix_init(struct platform_device *pdev)
+{
+ struct netc_blk_ctrl *priv = platform_get_drvdata(pdev);
+ struct device_node *np = pdev->dev.of_node;
+ phy_interface_t interface;
+ int bus_devfn, mii_proto;
+ u32 val;
+ int err;
+
+ /* Default setting */
+ val = MII_PROT(0, MII_PROT_RGMII) | MII_PROT(1, MII_PROT_RGMII);
+
+ /* Update the link MII protocol through parsing phy-mode */
+ for_each_child_of_node_scoped(np, child) {
+ for_each_child_of_node_scoped(child, gchild) {
+ if (!of_device_is_compatible(gchild, "pci1131,e101"))
+ continue;
+
+ bus_devfn = netc_of_pci_get_bus_devfn(gchild);
+ if (bus_devfn < 0)
+ return bus_devfn;
+
+ err = of_get_phy_mode(gchild, &interface);
+ if (err)
+ continue;
+
+ mii_proto = netc_get_link_mii_protocol(interface);
+ if (mii_proto < 0)
+ return mii_proto;
+
+ switch (bus_devfn) {
+ case IMX952_ENETC0_BUS_DEVFN:
+ val = u32_replace_bits(val, mii_proto,
+ CFG_LINK_MII_PORT_0);
+ break;
+ case IMX952_ENETC1_BUS_DEVFN:
+ val = u32_replace_bits(val, mii_proto,
+ CFG_LINK_MII_PORT_1);
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ }
+
+ netc_reg_write(priv->netcmix, IMX95_CFG_LINK_MII_PROT, val);
+
+ return 0;
+}
+
static bool netc_ierb_is_locked(struct netc_blk_ctrl *priv)
{
return !!(netc_reg_read(priv->prb, PRB_NETCRR) & NETCRR_LOCK);
@@ -783,6 +839,16 @@ static int imx94_ierb_init(struct platform_device *pdev)
return 0;
}
+static int imx952_ierb_init(struct platform_device *pdev)
+{
+ struct netc_blk_ctrl *priv = platform_get_drvdata(pdev);
+
+ netc_reg_write(priv->ierb, IERB_ETXHPTBCR(0), IMX952_BYTE_CREDIT);
+ netc_reg_write(priv->ierb, IERB_ETXLPTBCR(0), IMX952_BYTE_CREDIT);
+
+ return 0;
+}
+
static int netc_ierb_init(struct platform_device *pdev)
{
struct netc_blk_ctrl *priv = platform_get_drvdata(pdev);
@@ -882,8 +948,15 @@ static const struct netc_devinfo imx94_devinfo = {
.ierb_init = imx94_ierb_init,
};
+static const struct netc_devinfo imx952_devinfo = {
+ .flags = NETC_HAS_NETCMIX,
+ .netcmix_init = imx952_netcmix_init,
+ .ierb_init = imx952_ierb_init,
+};
+
static const struct of_device_id netc_blk_ctrl_match[] = {
{ .compatible = "nxp,imx95-netc-blk-ctrl", .data = &imx95_devinfo },
+ { .compatible = "nxp,imx952-netc-blk-ctrl", .data = &imx952_devinfo },
{ .compatible = "nxp,imx94-netc-blk-ctrl", .data = &imx94_devinfo },
{},
};
--
2.56.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH net-next 3/4] net: enetc: add i.MX952 ENETC support
2026-11-18 10:37 [PATCH net-next 0/4] net: enetc: Add i.MX952 support Frieder Schrempf
2026-11-18 10:37 ` [PATCH net-next 1/4] dt-bindings: net: nxp,netc-blk-ctrl: add i.MX952 compatible Frieder Schrempf
2026-11-18 10:37 ` [PATCH net-next 2/4] net: enetc: netc_blk_ctrl: add i.MX952 support Frieder Schrempf
@ 2026-11-18 10:37 ` Frieder Schrempf
2026-11-19 10:38 ` sashiko-bot
2026-11-18 10:37 ` [PATCH net-next 4/4] ptp: netc: use 133 MHz system clock on i.MX952 Frieder Schrempf
2026-11-18 10:43 ` [PATCH net-next 0/4] net: enetc: Add i.MX952 support Clark Wang
4 siblings, 1 reply; 13+ messages in thread
From: Frieder Schrempf @ 2026-11-18 10:37 UTC (permalink / raw)
To: Claudiu Manoil, Vladimir Oltean, Wei Fang, Clark Wang,
Andrew Lunn, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Richard Cochran
Cc: imx, netdev, devicetree, linux-kernel, Frieder Schrempf
From: Wei Fang <wei.fang@nxp.com>
The ENETC driver gets some IP information based on the revision. If the
corresponding revision is not present in enetc_info array, the driver
will probe fail. Since the ENETC revision of i.MX952 is 4.6, so add
relevant data to enetc_info. In addition, update
enetc_get_phc_index_by_pdev() to ensure that PTP related functions work
properly.
To enable SGMII 1G, 133 MHz is required as the sysclk of ENETC on
i.MX952, so the driver data of revision 4.6 uses a 133 MHz sysclk_freq.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Co-developed-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
[fs: squashed NXP 685950f45e25, 4f7689081034; dropped enetc4_tc.c hunk
and shared_tx_rings]
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
drivers/net/ethernet/freescale/enetc/enetc.c | 23 ++++++++++++++++++++++
.../net/ethernet/freescale/enetc/enetc_ethtool.c | 1 +
drivers/net/ethernet/freescale/enetc/enetc_hw.h | 2 ++
3 files changed, 26 insertions(+)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
index c6571b5cc8425..4ef387578b1e4 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
@@ -3812,6 +3812,14 @@ static const struct enetc_drvdata enetc4_pf_data = {
.eth_ops = &enetc4_pf_ethtool_ops,
};
+static const struct enetc_drvdata enetc4_6_pf_data = {
+ .sysclk_freq = ENETC_CLK_133M,
+ .tx_csum = true,
+ .max_frags = ENETC4_MAX_SKB_FRAGS,
+ .pmac_offset = ENETC4_PMAC_OFFSET,
+ .eth_ops = &enetc4_pf_ethtool_ops,
+};
+
static const struct enetc_drvdata enetc4_ppm_data = {
.sysclk_freq = ENETC_CLK_333M,
.tx_csum = true,
@@ -3832,6 +3840,13 @@ static const struct enetc_drvdata enetc4_vf_data = {
.eth_ops = &enetc_vf_ethtool_ops,
};
+static const struct enetc_drvdata enetc4_6_vf_data = {
+ .sysclk_freq = ENETC_CLK_133M,
+ .tx_csum = true,
+ .max_frags = ENETC4_MAX_SKB_FRAGS,
+ .eth_ops = &enetc_vf_ethtool_ops,
+};
+
static const struct enetc_platform_info enetc_info[] = {
{ .revision = ENETC_REV_1_0,
.dev_id = ENETC_DEV_ID_PF,
@@ -3862,6 +3877,14 @@ static const struct enetc_platform_info enetc_info[] = {
.dev_id = NXP_ENETC_VF_DEV_ID,
.data = &enetc4_vf_data,
},
+ { .revision = ENETC_REV_4_6,
+ .dev_id = NXP_ENETC_PF_DEV_ID,
+ .data = &enetc4_6_pf_data,
+ },
+ { .revision = ENETC_REV_4_6,
+ .dev_id = NXP_ENETC_VF_DEV_ID,
+ .data = &enetc4_6_vf_data,
+ },
};
int enetc_get_driver_data(struct enetc_si *si)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
index 7965dfd06f5f6..3c6c6fc0ab8cf 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
@@ -1149,6 +1149,7 @@ static int enetc_get_phc_index_by_pdev(struct enetc_si *si)
devfn = PCI_DEVFN(24, 0);
break;
case ENETC_REV_4_3:
+ case ENETC_REV_4_6:
devfn = PCI_DEVFN(0, 1);
break;
default:
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_hw.h b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
index 2c9d9042eb0bb..339691cdf44fb 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
@@ -414,6 +414,7 @@ enum enetc_bdr_type {TX, RX};
#define ENETC_REV_1_0 0x0100
#define ENETC_REV_4_1 0X0401
#define ENETC_REV_4_3 0x0403
+#define ENETC_REV_4_6 0x0406
#define ENETC_G_EIPBRR1 0x0bfc
#define ENETC_G_EPFBLPR(n) (0xd00 + 4 * (n))
@@ -1050,6 +1051,7 @@ struct enetc_cbd {
#define ENETC_CLK_400M 400000000ULL
#define ENETC_CLK_333M 333000000ULL
+#define ENETC_CLK_133M 133000000ULL
static inline u32 enetc_cycles_to_usecs(u32 cycles, u64 clk_freq)
{
--
2.56.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH net-next 4/4] ptp: netc: use 133 MHz system clock on i.MX952
2026-11-18 10:37 [PATCH net-next 0/4] net: enetc: Add i.MX952 support Frieder Schrempf
` (2 preceding siblings ...)
2026-11-18 10:37 ` [PATCH net-next 3/4] net: enetc: add i.MX952 ENETC support Frieder Schrempf
@ 2026-11-18 10:37 ` Frieder Schrempf
2026-11-19 10:38 ` sashiko-bot
2026-11-18 10:43 ` [PATCH net-next 0/4] net: enetc: Add i.MX952 support Clark Wang
4 siblings, 1 reply; 13+ messages in thread
From: Frieder Schrempf @ 2026-11-18 10:37 UTC (permalink / raw)
To: Claudiu Manoil, Vladimir Oltean, Wei Fang, Clark Wang,
Andrew Lunn, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Richard Cochran
Cc: imx, netdev, devicetree, linux-kernel, Frieder Schrempf
From: Clark Wang <xiaoning.wang@nxp.com>
On i.MX952 (NETC revision 4.6) the NETC system clock runs at 133 MHz
instead of 333 MHz. If no reference clock is given in the device tree,
the timer uses the system clock, so its default frequency must match,
otherwise the PTP clock runs at the wrong rate.
The revision is read before the device tree is parsed, so it can be
used to select the default frequency.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
[fs: from NXP 8af062154e48]
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
drivers/ptp/ptp_netc.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/ptp/ptp_netc.c b/drivers/ptp/ptp_netc.c
index 1a327a7561e39..7b9c0a4cbb4c3 100644
--- a/drivers/ptp/ptp_netc.c
+++ b/drivers/ptp/ptp_netc.c
@@ -72,6 +72,7 @@
#define NETC_GLOBAL_IPBRR0 0xbf8
#define IPBRR0_IP_REV GENMASK(15, 0)
#define NETC_REV_4_1 0x0401
+#define NETC_REV_4_6 0x0406
#define NETC_TMR_FIPER_NUM 3
#define NETC_TMR_INVALID_CHANNEL NETC_TMR_FIPER_NUM
@@ -88,6 +89,7 @@
#define NETC_TMR_EXT_OSC 2 /* tmr_1588_clk, from IO pins */
#define NETC_TMR_SYSCLK_333M 333333333U
+#define NETC_TMR_SYSCLK_133M 133333333U
enum netc_pp_type {
NETC_PP_PPS = 1,
@@ -858,7 +860,10 @@ static int netc_timer_get_reference_clk_source(struct netc_timer *priv)
/* Select NETC system clock as the reference clock by default */
priv->clk_select = NETC_TMR_SYSTEM_CLK;
- priv->clk_freq = NETC_TMR_SYSCLK_333M;
+ if (priv->revision == NETC_REV_4_6)
+ priv->clk_freq = NETC_TMR_SYSCLK_133M;
+ else
+ priv->clk_freq = NETC_TMR_SYSCLK_333M;
/* Update the clock source of the reference clock if the clock
* is specified in DT node.
--
2.56.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* RE: [PATCH net-next 0/4] net: enetc: Add i.MX952 support
2026-11-18 10:37 [PATCH net-next 0/4] net: enetc: Add i.MX952 support Frieder Schrempf
` (3 preceding siblings ...)
2026-11-18 10:37 ` [PATCH net-next 4/4] ptp: netc: use 133 MHz system clock on i.MX952 Frieder Schrempf
@ 2026-11-18 10:43 ` Clark Wang
2026-11-18 10:50 ` Frieder Schrempf
4 siblings, 1 reply; 13+ messages in thread
From: Clark Wang @ 2026-11-18 10:43 UTC (permalink / raw)
To: Frieder Schrempf, Claudiu Manoil, Vladimir Oltean, Wei Fang,
Andrew Lunn, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Richard Cochran
Cc: imx@lists.linux.dev, netdev@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Frieder Schrempf
> Subject: [PATCH net-next 0/4] net: enetc: Add i.MX952 support
>
> This adds support for the NETC Ethernet controller on the i.MX952 SoC.
>
> i.MX952 has two ENETC instances (IP revision 4.6), each on its own PCIe bus.
> ENETC0 shares bus 0 with the NETC timer and the central EMDIO,
> ENETC1 sits alone on bus 1. The NETC system clock runs at 133 MHz, compared to
> 333 MHz on i.MX95.
>
> The patches are ported from NXP's lf-6.18.y vendor kernel. The device tree
> changes for imx952.dtsi and the i.MX952 EVK will be sent separately to the i.MX
> tree.
>
> Tested on the i.MX952 EVK with ENETC0 (RGMII): the link works, hardware
> timestamping is available and the PHC runs at the correct rate. ENETC1 is
> untested as it needs an add-on board.
>
> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
> ---
> Clark Wang (2):
> net: enetc: netc_blk_ctrl: add i.MX952 support
> ptp: netc: use 133 MHz system clock on i.MX952
>
> Frieder Schrempf (1):
> dt-bindings: net: nxp,netc-blk-ctrl: add i.MX952 compatible
>
> Wei Fang (1):
> net: enetc: add i.MX952 ENETC support
>
> .../devicetree/bindings/net/nxp,netc-blk-ctrl.yaml | 1 +
> drivers/net/ethernet/freescale/enetc/enetc.c | 23 +++++++
> .../net/ethernet/freescale/enetc/enetc_ethtool.c | 1 +
> drivers/net/ethernet/freescale/enetc/enetc_hw.h | 2 +
> .../net/ethernet/freescale/enetc/netc_blk_ctrl.c | 73
> ++++++++++++++++++++++
> drivers/ptp/ptp_netc.c | 7 ++-
> 6 files changed, 106 insertions(+), 1 deletion(-)
> ---
> base-commit: d6816d9a93b66a12bf01e10037e377f3333ad6cc
> change-id: 20261118-imx952-enetc-bd2bc331e1b5
>
> Best regards,
> --
> Frieder Schrempf <frieder.schrempf@kontron.de>
Hi Frieder,
I have sent the V1 patchset for imx952, will sent V2 this week.
https://lore.kernel.org/all/20261104092217.1730351-1-xiaoning.wang@oss.nxp.com/
Thanks!
Best Regards,
Clark Wang
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH net-next 0/4] net: enetc: Add i.MX952 support
2026-11-18 10:43 ` [PATCH net-next 0/4] net: enetc: Add i.MX952 support Clark Wang
@ 2026-11-18 10:50 ` Frieder Schrempf
0 siblings, 0 replies; 13+ messages in thread
From: Frieder Schrempf @ 2026-11-18 10:50 UTC (permalink / raw)
To: Clark Wang, Frieder Schrempf, Claudiu Manoil, Vladimir Oltean,
Wei Fang, Andrew Lunn, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Richard Cochran
Cc: imx@lists.linux.dev, netdev@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
On 18.11.26 11:43, Clark Wang wrote:
> [Sie erhalten nicht h?ufig E-Mails von xiaoning.wang@nxp.com. Weitere Informationen, warum dies wichtig ist, finden Sie unter https://aka.ms/LearnAboutSenderIdentification ]
>
>> Subject: [PATCH net-next 0/4] net: enetc: Add i.MX952 support
>>
>> This adds support for the NETC Ethernet controller on the i.MX952 SoC.
>>
>> i.MX952 has two ENETC instances (IP revision 4.6), each on its own PCIe bus.
>> ENETC0 shares bus 0 with the NETC timer and the central EMDIO,
>> ENETC1 sits alone on bus 1. The NETC system clock runs at 133 MHz, compared to
>> 333 MHz on i.MX95.
>>
>> The patches are ported from NXP's lf-6.18.y vendor kernel. The device tree
>> changes for imx952.dtsi and the i.MX952 EVK will be sent separately to the i.MX
>> tree.
>>
>> Tested on the i.MX952 EVK with ENETC0 (RGMII): the link works, hardware
>> timestamping is available and the PHC runs at the correct rate. ENETC1 is
>> untested as it needs an add-on board.
>>
>> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
>> ---
>> Clark Wang (2):
>> net: enetc: netc_blk_ctrl: add i.MX952 support
>> ptp: netc: use 133 MHz system clock on i.MX952
>>
>> Frieder Schrempf (1):
>> dt-bindings: net: nxp,netc-blk-ctrl: add i.MX952 compatible
>>
>> Wei Fang (1):
>> net: enetc: add i.MX952 ENETC support
>>
>> .../devicetree/bindings/net/nxp,netc-blk-ctrl.yaml | 1 +
>> drivers/net/ethernet/freescale/enetc/enetc.c | 23 +++++++
>> .../net/ethernet/freescale/enetc/enetc_ethtool.c | 1 +
>> drivers/net/ethernet/freescale/enetc/enetc_hw.h | 2 +
>> .../net/ethernet/freescale/enetc/netc_blk_ctrl.c | 73
>> ++++++++++++++++++++++
>> drivers/ptp/ptp_netc.c | 7 ++-
>> 6 files changed, 106 insertions(+), 1 deletion(-)
>> ---
>> base-commit: d6816d9a93b66a12bf01e10037e377f3333ad6cc
>> change-id: 20261118-imx952-enetc-bd2bc331e1b5
>>
>> Best regards,
>> --
>> Frieder Schrempf <frieder.schrempf@kontron.de>
>
> Hi Frieder,
>
> I have sent the V1 patchset for imx952, will sent V2 this week.
> https://lore.kernel.org/all/20261104092217.1730351-1-xiaoning.wang@oss.nxp.com/
Thanks! I totally missed your series when I was searching for it.
Please ignore this series and sorry for the additional noise.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH net-next 2/4] net: enetc: netc_blk_ctrl: add i.MX952 support
2026-11-18 10:37 ` [PATCH net-next 2/4] net: enetc: netc_blk_ctrl: add i.MX952 support Frieder Schrempf
@ 2026-11-18 13:51 ` Andrew Lunn
0 siblings, 0 replies; 13+ messages in thread
From: Andrew Lunn @ 2026-11-18 13:51 UTC (permalink / raw)
To: Frieder Schrempf
Cc: Claudiu Manoil, Vladimir Oltean, Wei Fang, Clark Wang,
Andrew Lunn, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Richard Cochran, imx, netdev, devicetree, linux-kernel,
Frieder Schrempf
> +static int imx952_netcmix_init(struct platform_device *pdev)
> +{
> + struct netc_blk_ctrl *priv = platform_get_drvdata(pdev);
> + struct device_node *np = pdev->dev.of_node;
> + phy_interface_t interface;
> + int bus_devfn, mii_proto;
> + u32 val;
> + int err;
> +
> + /* Default setting */
> + val = MII_PROT(0, MII_PROT_RGMII) | MII_PROT(1, MII_PROT_RGMII);
> +
> + /* Update the link MII protocol through parsing phy-mode */
> + for_each_child_of_node_scoped(np, child) {
> + for_each_child_of_node_scoped(child, gchild) {
> + if (!of_device_is_compatible(gchild, "pci1131,e101"))
> + continue;
> +
> + bus_devfn = netc_of_pci_get_bus_devfn(gchild);
> + if (bus_devfn < 0)
> + return bus_devfn;
> +
> + err = of_get_phy_mode(gchild, &interface);
> + if (err)
> + continue;
> +
> + mii_proto = netc_get_link_mii_protocol(interface);
> + if (mii_proto < 0)
> + return mii_proto;
> +
> + switch (bus_devfn) {
> + case IMX952_ENETC0_BUS_DEVFN:
> + val = u32_replace_bits(val, mii_proto,
> + CFG_LINK_MII_PORT_0);
> + break;
> + case IMX952_ENETC1_BUS_DEVFN:
> + val = u32_replace_bits(val, mii_proto,
> + CFG_LINK_MII_PORT_1);
> + break;
> + default:
> + return -EINVAL;
> + }
> + }
> + }
> +
> + netc_reg_write(priv->netcmix, IMX95_CFG_LINK_MII_PROT, val);
> +
> + return 0;
> +}
> +
This looks very similar to imx95_netcmix_init(), and
imx94_link_config() is similar to the core of this loop.
Can some core refactoring be done to reduce duplication?
Andrew
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH net-next 1/4] dt-bindings: net: nxp,netc-blk-ctrl: add i.MX952 compatible
2026-11-18 10:37 ` [PATCH net-next 1/4] dt-bindings: net: nxp,netc-blk-ctrl: add i.MX952 compatible Frieder Schrempf
@ 2026-11-18 17:43 ` Conor Dooley
0 siblings, 0 replies; 13+ messages in thread
From: Conor Dooley @ 2026-11-18 17:43 UTC (permalink / raw)
To: Frieder Schrempf
Cc: Claudiu Manoil, Vladimir Oltean, Wei Fang, Clark Wang,
Andrew Lunn, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Richard Cochran, imx, netdev, devicetree, linux-kernel,
Frieder Schrempf
[-- Attachment #1: Type: text/plain, Size: 75 bytes --]
Acked-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH net-next 3/4] net: enetc: add i.MX952 ENETC support
2026-11-18 10:37 ` [PATCH net-next 3/4] net: enetc: add i.MX952 ENETC support Frieder Schrempf
@ 2026-11-19 10:38 ` sashiko-bot
0 siblings, 0 replies; 13+ messages in thread
From: sashiko-bot @ 2026-11-19 10:38 UTC (permalink / raw)
To: Frieder Schrempf; +Cc: imx, devicetree, robh, conor+dt, Frank.Li
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Medium] net: enetc: wrong PCI bus lookup in
enetc_get_phc_index_by_pdev() on i.MX952
--
commit 9488db0afb3e3295b4063b2f78e46b5195953993
Author: Wei Fang <wei.fang@nxp.com>
net: enetc: add i.MX952 ENETC support
This commit adds driver data with a 133 MHz sysclk frequency and PHC PCI
lookup support for i.MX952 ENETC (revision 4.6) PF and VF devices.
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
> index 7965dfd06f5f6..3c6c6fc0ab8cf 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
> +++ b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
> @@ -1149,6 +1149,7 @@ static int enetc_get_phc_index_by_pdev(struct enetc_si *si)
> devfn = PCI_DEVFN(24, 0);
> break;
> case ENETC_REV_4_3:
> + case ENETC_REV_4_6:
> devfn = PCI_DEVFN(0, 1);
> break;
> default:
[Severity: Medium]
Does enetc_get_phc_index_by_pdev() look up the PTP timer on the wrong PCI
bus for i.MX952 ENETC1 and its VFs?
On i.MX952, ENETC0 is on bus 0 whereas ENETC1 is on bus 1:
drivers/net/ethernet/freescale/enetc/netc_blk_ctrl.c:
#define IMX952_ENETC0_BUS_DEVFN 0x0
#define IMX952_ENETC1_BUS_DEVFN 0x100
Unlike i.MX94 (ENETC_REV_4_3), which provides a timer endpoint on each
bus, i.MX952 only has a single NETC 1588 timer on bus 0 at PCI_DEVFN(0, 1).
Because enetc_get_phc_index_by_pdev() queries si->pdev->bus via
pci_get_domain_bus_and_slot(), calling it for ENETC1 (on VFs where of_node
is NULL, or on PF when the optional ptp-timer phandle is absent) searches
bus 1, fails to find the timer, and causes enetc_get_ts_info() to fall back
to software timestamping.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261118-imx952-enetc-v1-0-25721440602e@kontron.de?part=3
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH net-next 4/4] ptp: netc: use 133 MHz system clock on i.MX952
2026-11-18 10:37 ` [PATCH net-next 4/4] ptp: netc: use 133 MHz system clock on i.MX952 Frieder Schrempf
@ 2026-11-19 10:38 ` sashiko-bot
0 siblings, 0 replies; 13+ messages in thread
From: sashiko-bot @ 2026-11-19 10:38 UTC (permalink / raw)
To: Frieder Schrempf; +Cc: imx, devicetree, robh, conor+dt, Frank.Li
Thank you for your contribution! Sashiko AI review found no new issues
in this patch, but noticed 1 related pre-existing issue it does not
introduce:
- [High] ptp: netc: divide-by-zero in
netc_timer_get_reference_clk_source() [1]
--
commit e475f16482c806a640a726db8d69f83db4761a16
Author: Clark Wang <xiaoning.wang@nxp.com>
ptp: netc: use 133 MHz system clock on i.MX952
This commit sets the default NETC timer reference clock frequency to
133 MHz on i.MX952 (NETC revision 4.6) when no reference clock is specified
in the device tree.
> diff --git a/drivers/ptp/ptp_netc.c b/drivers/ptp/ptp_netc.c
> index 1a327a7561e39..7b9c0a4cbb4c3 100644
> --- a/drivers/ptp/ptp_netc.c
> +++ b/drivers/ptp/ptp_netc.c
[ ... ]
> @@ -858,7 +860,10 @@ static int netc_timer_get_reference_clk_source(struct netc_timer *priv)
>
> /* Select NETC system clock as the reference clock by default */
> priv->clk_select = NETC_TMR_SYSTEM_CLK;
> - priv->clk_freq = NETC_TMR_SYSCLK_333M;
> + if (priv->revision == NETC_REV_4_6)
> + priv->clk_freq = NETC_TMR_SYSCLK_133M;
> + else
> + priv->clk_freq = NETC_TMR_SYSCLK_333M;
>
> /* Update the clock source of the reference clock if the clock
> * is specified in DT node.
[Severity: High]
This problem wasn't introduced by this patch, but can a reference clock in
the device tree cause a divide-by-zero in
netc_timer_get_reference_clk_source() [1]?
drivers/ptp/ptp_netc.c:netc_timer_get_reference_clk_source() {
...
if (clk) {
priv->clk_freq = clk_get_rate(clk);
priv->clk_select = i ? NETC_TMR_EXT_OSC :
NETC_TMR_CCM_TIMER1;
break;
}
}
...
priv->period = div_u64((u64)NSEC_PER_SEC << 32, priv->clk_freq);
}
When a DT clock is present, clk_get_rate(clk) overwrites priv->clk_freq
without checking for 0 before dividing by it in div_u64() (and later in
netc_timer_get_gclk_period()). If an uninitialized or misconfigured clock
provider returns 0 Hz, probe will crash with a divide-by-zero exception.
[1] https://sashiko.dev/#/bug/linux-3717398e-82c6-4e7a-897d-56088b4c53be
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261118-imx952-enetc-v1-0-25721440602e@kontron.de?part=4
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2026-11-19 10:38 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-18 10:37 [PATCH net-next 0/4] net: enetc: Add i.MX952 support Frieder Schrempf
2026-11-18 10:37 ` [PATCH net-next 1/4] dt-bindings: net: nxp,netc-blk-ctrl: add i.MX952 compatible Frieder Schrempf
2026-11-18 17:43 ` Conor Dooley
2026-11-18 10:37 ` [PATCH net-next 2/4] net: enetc: netc_blk_ctrl: add i.MX952 support Frieder Schrempf
2026-11-18 13:51 ` Andrew Lunn
2026-11-18 10:37 ` [PATCH net-next 3/4] net: enetc: add i.MX952 ENETC support Frieder Schrempf
2026-11-19 10:38 ` sashiko-bot
2026-11-18 10:37 ` [PATCH net-next 4/4] ptp: netc: use 133 MHz system clock on i.MX952 Frieder Schrempf
2026-11-19 10:38 ` sashiko-bot
2026-11-18 10:43 ` [PATCH net-next 0/4] net: enetc: Add i.MX952 support Clark Wang
2026-11-18 10:50 ` Frieder Schrempf
-- strict thread matches above, loose matches on Subject: below --
2026-11-04 9:22 [PATCH net-next 0/4] net: enetc: add i.MX952 NETC v4.6 support xiaoning.wang
2026-11-04 9:22 ` [PATCH net-next 3/4] net: enetc: add i.MX952 ENETC support xiaoning.wang
2026-11-05 9:27 ` sashiko-bot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox