Devicetree
 help / color / mirror / Atom feed
* [PATCH v2 00/11] phy/drm: amlogic: Extract Meson HDMI TX PHY into a dedicated driver
@ 2026-11-20 18:15 Ronald Claveau via B4 Relay
  2026-11-20 18:15 ` [PATCH v2 01/11] dt-bindings: soc: amlogic: meson-gx-hhi-sysctrl: Fix compatible matching in conditionals Ronald Claveau via B4 Relay
                   ` (10 more replies)
  0 siblings, 11 replies; 14+ messages in thread
From: Ronald Claveau via B4 Relay @ 2026-11-20 18:15 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Neil Armstrong,
	Kevin Hilman, Jerome Brunet, Martin Blumenstingl, Vinod Koul,
	Manivannan Sadhasivam, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, David Airlie, Simona Vetter, Ulf Hansson
  Cc: devicetree, linux-arm-kernel, linux-amlogic, linux-kernel,
	linux-phy, dri-devel, Ronald Claveau, linux-pm

This series moves the Amlogic Meson HDMI TX PHY handling (covering GXBB,
GXL, GXM, and G12A SoCs) out of the meson_dw_hdmi DRM driver and into a
dedicated generic PHY driver.

Until now, meson_dw_hdmi directly manipulated the HHI system controller
registers (HHI_HDMI_PHY_CNTL0..5) to configure analog parameters, toggle
resets, and manage power states, as well as manually ungating HDMI
clocks and power domains already described in the DT.

By extracting this logic into a standalone PHY driver under
drivers/phy/amlogic/:
- Hardware representation in the DT is cleaner, modeling the HDMI TX PHY
  as a child node of the HHI syscon referenced via standard "phys"
  properties.
- The DRM bridge driver relies on the standard generic PHY API
  (phy_init, phy_configure, phy_power_on/off, phy_exit) rather than
  touching syscon registers directly.
- Legacy DTs lacking the "phys" property remain supported via a
  temporary fallback helper (meson_hdmi_phy_create_legacy) to preserve
  backward compatibility to be removed on next phase of component
  removal.

Overview of the series:
- Patches 1-3: Fix compatible matching in meson-gx-hhi-sysctrl bindings,
  add the new amlogic,meson-hdmi-tx-phy DT schema, and allow the
  "hdmi-phy" child node under the HHI syscon.
- Patch 4: Add the new Meson HDMI TX PHY driver implementing the HDMI
  PHY configuration ops, along with the temporary legacy creation
  helper.
- Patch 5: Document the optional "phys" and properties in the
  amlogic,meson-dw-hdmi binding.
- Patch 6: Make meson-ee-pwrc power up the domain memories when the
  domain is already on at probe time, as this is a prerequisite for
  dropping the explicit write from meson_dw_hdmi
- Patches 7-8: Clean up manual HHI clock/power-domain writes in
  meson_dw_hdmi (relying on runtime PM instead) and convert the driver
  to use the generic PHY framework.
- Patches 9-11: Add the "hdmi-phy" child node and wire up the "phys"
  phandle for G12, GXBB, and GXL Device Trees.

Tested on:
- Khadas VIM1 (GXL)
- dtbs_check and dt_binding_check run cleanly with no new warnings.

Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
---
Changes in v2:
- Patches 5,9-11: Remove unecessary "phy-names" for uniq phy.
                  Thanks to Neil's feedback.
- Add Patch 6: Power up the memories when the domain is already on.
               From Sashiko's feedback.
- Patch 4: Add a 600MHz max_rate and a 25Mhz min_rate check and
           exclude PHY_HDMI_MODE_FRL for phy_validate. Thx Sashiko.
- Patch 8: Move phy_init in dw_hdmi_phy_init and phy_exit
           in dw_hdmi_phy_disable. From Sashiko review.
- Link to v1: https://patch.msgid.link/20261117-meson-drm-create-hdmitx-phy-v1-0-9e0ac931381c@aliel.fr

To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Neil Armstrong <neil.armstrong@linaro.org>
To: Kevin Hilman <khilman@baylibre.com>
To: Jerome Brunet <jbrunet@baylibre.com>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: Vinod Koul <vkoul@kernel.org>
To: Manivannan Sadhasivam <mani@kernel.org>
To: Ronald Claveau <linux-kernel-dev@aliel.fr>
To: David Airlie <airlied@gmail.com>
To: Simona Vetter <simona@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: Ulf Hansson <ulfh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-phy@lists.infradead.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-pm@vger.kernel.org

---
Ronald Claveau (11):
      dt-bindings: soc: amlogic: meson-gx-hhi-sysctrl: Fix compatible matching in conditionals
      dt-bindings: phy: amlogic: Add Meson HDMI TX PHY binding
      dt-bindings: soc: amlogic: meson-gx-hhi-sysctrl: Add hdmi-phy child node
      phy: amlogic: Add Meson HDMI TX PHY driver
      dt-bindings: display: amlogic,meson-dw-hdmi: Add phys
      pmdomain: amlogic: meson-ee-pwrc: power up memories for boot-enabled domains
      drm/meson: dw-hdmi: Drop manual HHI clock and memory PD setup
      drm/meson: dw-hdmi: Use the generic PHY framework for the HDMI TX PHY
      arm64: dts: amlogic: Add HDMI TX PHY node for G12
      arm64: dts: amlogic: Add HDMI TX PHY node for GXBB
      arm64: dts: amlogic: Add HDMI TX PHY node for GXL

 .../bindings/display/amlogic,meson-dw-hdmi.yaml    |   4 +
 .../bindings/phy/amlogic,meson-hdmi-tx-phy.yaml    |  33 +++
 .../soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml  |  43 ++-
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi  |   6 +
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        |   6 +
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi         |   6 +
 drivers/gpu/drm/meson/Kconfig                      |   2 +
 drivers/gpu/drm/meson/meson_dw_hdmi.c              | 193 +++++--------
 drivers/phy/amlogic/Kconfig                        |  11 +
 drivers/phy/amlogic/Makefile                       |   1 +
 drivers/phy/amlogic/phy-meson-hdmi-tx.c            | 319 +++++++++++++++++++++
 drivers/pmdomain/amlogic/meson-ee-pwrc.c           |  12 +
 include/linux/phy/phy-meson-hdmi-tx.h              |  19 ++
 13 files changed, 520 insertions(+), 135 deletions(-)
---
base-commit: 6d582d78fad9d828e575ca0cdcff8ea47a77220b
change-id: 20261115-meson-drm-create-hdmitx-phy-4ac40a654d09

Best regards,
--  
Ronald Claveau <linux-kernel-dev@aliel.fr>



^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2026-11-20 19:20 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-20 18:15 [PATCH v2 00/11] phy/drm: amlogic: Extract Meson HDMI TX PHY into a dedicated driver Ronald Claveau via B4 Relay
2026-11-20 18:15 ` [PATCH v2 01/11] dt-bindings: soc: amlogic: meson-gx-hhi-sysctrl: Fix compatible matching in conditionals Ronald Claveau via B4 Relay
2026-11-20 18:15 ` [PATCH v2 02/11] dt-bindings: phy: amlogic: Add Meson HDMI TX PHY binding Ronald Claveau via B4 Relay
2026-11-20 18:15 ` [PATCH v2 03/11] dt-bindings: soc: amlogic: meson-gx-hhi-sysctrl: Add hdmi-phy child node Ronald Claveau via B4 Relay
2026-11-20 18:15 ` [PATCH v2 04/11] phy: amlogic: Add Meson HDMI TX PHY driver Ronald Claveau via B4 Relay
2026-11-20 18:15 ` [PATCH v2 05/11] dt-bindings: display: amlogic,meson-dw-hdmi: Add phys Ronald Claveau via B4 Relay
2026-11-20 18:15 ` [PATCH v2 06/11] pmdomain: amlogic: meson-ee-pwrc: power up memories for boot-enabled domains Ronald Claveau via B4 Relay
2026-11-20 18:58   ` sashiko-bot
2026-11-20 18:15 ` [PATCH v2 07/11] drm/meson: dw-hdmi: Drop manual HHI clock and memory PD setup Ronald Claveau via B4 Relay
2026-11-20 18:15 ` [PATCH v2 08/11] drm/meson: dw-hdmi: Use the generic PHY framework for the HDMI TX PHY Ronald Claveau via B4 Relay
2026-11-20 19:20   ` sashiko-bot
2026-11-20 18:15 ` [PATCH v2 09/11] arm64: dts: amlogic: Add HDMI TX PHY node for G12 Ronald Claveau via B4 Relay
2026-11-20 18:15 ` [PATCH v2 10/11] arm64: dts: amlogic: Add HDMI TX PHY node for GXBB Ronald Claveau via B4 Relay
2026-11-20 18:15 ` [PATCH v2 11/11] arm64: dts: amlogic: Add HDMI TX PHY node for GXL Ronald Claveau via B4 Relay

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox