[PATCH v4 0/2] Add CCPI2 PMU support

[PATCH v4 0/2] Add CCPI2 PMU support

[Ganapatrao Kulkarni]

Add Cavium Coherent Processor Interconnect (CCPI2) PMU
support in ThunderX2 Uncore driver.

v4:
	Update with review comments [2].
	Changed Counter read to 2 word read since single dword read is misbhehaving(hw issue).

[2] https://lkml.org/lkml/2019/7/23/231

v3: Rebased to 5.3-rc1

v2: Updated with review comments [1]

[1] https://lkml.org/lkml/2019/6/14/965

v1: initial patch

Ganapatrao Kulkarni (2):
  Documentation: perf: Update documentation for ThunderX2 PMU uncore
    driver
  drivers/perf: Add CCPI2 PMU support in ThunderX2 UNCORE driver.

 .../admin-guide/perf/thunderx2-pmu.rst        |  20 +-
 drivers/perf/thunderx2_pmu.c                  | 258 +++++++++++++++---
 2 files changed, 236 insertions(+), 42 deletions(-)

-- 
2.17.1

[PATCH v4 1/2] Documentation: perf: Update documentation for ThunderX2 PMU uncore driver

[Ganapatrao Kulkarni]

From: Ganapatrao Kulkarni <ganapatrao.kulkarni@marvell.com>

Add documentation for Cavium Coherent Processor Interconnect (CCPI2) PMU.

Signed-off-by: Ganapatrao Kulkarni <gkulkarni@marvell.com>
---
 .../admin-guide/perf/thunderx2-pmu.rst        | 20 ++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/Documentation/admin-guide/perf/thunderx2-pmu.rst b/Documentation/admin-guide/perf/thunderx2-pmu.rst
index 08e33675853a..01f158238ae1 100644
--- a/Documentation/admin-guide/perf/thunderx2-pmu.rst
+++ b/Documentation/admin-guide/perf/thunderx2-pmu.rst
@@ -3,24 +3,26 @@ Cavium ThunderX2 SoC Performance Monitoring Unit (PMU UNCORE)
 =============================================================
 
 The ThunderX2 SoC PMU consists of independent, system-wide, per-socket
-PMUs such as the Level 3 Cache (L3C) and DDR4 Memory Controller (DMC).
+PMUs such as the Level 3 Cache (L3C), DDR4 Memory Controller (DMC) and
+Cavium Coherent Processor Interconnect (CCPI2).
 
 The DMC has 8 interleaved channels and the L3C has 16 interleaved tiles.
 Events are counted for the default channel (i.e. channel 0) and prorated
 to the total number of channels/tiles.
 
-The DMC and L3C support up to 4 counters. Counters are independently
-programmable and can be started and stopped individually. Each counter
-can be set to a different event. Counters are 32-bit and do not support
-an overflow interrupt; they are read every 2 seconds.
+The DMC and L3C support up to 4 counters, while the CCPI2 supports up to 8
+counters. Counters are independently programmable to different events and
+can be started and stopped individually. None of the counters support an
+overflow interrupt. DMC and L3C counters are 32-bit and read every 2 seconds.
+The CCPI2 counters are 64-bit and assumed not to overflow in normal operation.
 
 PMU UNCORE (perf) driver:
 
 The thunderx2_pmu driver registers per-socket perf PMUs for the DMC and
-L3C devices.  Each PMU can be used to count up to 4 events
-simultaneously. The PMUs provide a description of their available events
-and configuration options under sysfs, see
-/sys/devices/uncore_<l3c_S/dmc_S/>; S is the socket id.
+L3C devices.  Each PMU can be used to count up to 4 (DMC/L3C) or up to 8
+(CCPI2) events simultaneously. The PMUs provide a description of their
+available events and configuration options under sysfs, see
+/sys/devices/uncore_<l3c_S/dmc_S/ccpi2_S/>; S is the socket id.
 
 The driver does not support sampling, therefore "perf record" will not
 work. Per-task perf sessions are also not supported.
-- 
2.17.1

[PATCH v4 2/2] drivers/perf: Add CCPI2 PMU support in ThunderX2 UNCORE driver.

[Ganapatrao Kulkarni]

CCPI2 is a low-latency high-bandwidth serial interface for inter socket
connectivity of ThunderX2 processors.

CCPI2 PMU supports up to 8 counters per socket. Counters are
independently programmable to different events and can be started and
stopped individually. The CCPI2 counters are 64-bit and do not overflow
in normal operation.

Signed-off-by: Ganapatrao Kulkarni <gkulkarni@marvell.com>
---
 drivers/perf/thunderx2_pmu.c | 258 ++++++++++++++++++++++++++++++-----
 1 file changed, 225 insertions(+), 33 deletions(-)

diff --git a/drivers/perf/thunderx2_pmu.c b/drivers/perf/thunderx2_pmu.c
index 43d76c85da56..d290d8ebbd53 100644
--- a/drivers/perf/thunderx2_pmu.c
+++ b/drivers/perf/thunderx2_pmu.c
@@ -16,23 +16,36 @@
  * they need to be sampled before overflow(i.e, at every 2 seconds).
  */
 
-#define TX2_PMU_MAX_COUNTERS		4
+#define TX2_PMU_DMC_L3C_MAX_COUNTERS	4
+#define TX2_PMU_CCPI2_MAX_COUNTERS	8
+#define TX2_PMU_MAX_COUNTERS		TX2_PMU_CCPI2_MAX_COUNTERS
+
+
 #define TX2_PMU_DMC_CHANNELS		8
 #define TX2_PMU_L3_TILES		16
 
 #define TX2_PMU_HRTIMER_INTERVAL	(2 * NSEC_PER_SEC)
-#define GET_EVENTID(ev)			((ev->hw.config) & 0x1f)
-#define GET_COUNTERID(ev)		((ev->hw.idx) & 0x3)
+#define GET_EVENTID(ev, mask)		((ev->hw.config) & mask)
+#define GET_COUNTERID(ev, mask)		((ev->hw.idx) & mask)
  /* 1 byte per counter(4 counters).
   * Event id is encoded in bits [5:1] of a byte,
   */
 #define DMC_EVENT_CFG(idx, val)		((val) << (((idx) * 8) + 1))
 
+/* bits[3:0] to select counters, are indexed from 8 to 15. */
+#define CCPI2_COUNTER_OFFSET		8
+
 #define L3C_COUNTER_CTL			0xA8
 #define L3C_COUNTER_DATA		0xAC
 #define DMC_COUNTER_CTL			0x234
 #define DMC_COUNTER_DATA		0x240
 
+#define CCPI2_PERF_CTL			0x108
+#define CCPI2_COUNTER_CTL		0x10C
+#define CCPI2_COUNTER_SEL		0x12c
+#define CCPI2_COUNTER_DATA_L		0x130
+#define CCPI2_COUNTER_DATA_H		0x134
+
 /* L3C event IDs */
 #define L3_EVENT_READ_REQ		0xD
 #define L3_EVENT_WRITEBACK_REQ		0xE
@@ -51,15 +64,28 @@
 #define DMC_EVENT_READ_TXNS		0xF
 #define DMC_EVENT_MAX			0x10
 
+#define CCPI2_EVENT_REQ_PKT_SENT	0x3D
+#define CCPI2_EVENT_SNOOP_PKT_SENT	0x65
+#define CCPI2_EVENT_DATA_PKT_SENT	0x105
+#define CCPI2_EVENT_GIC_PKT_SENT	0x12D
+#define CCPI2_EVENT_MAX			0x200
+
+#define CCPI2_PERF_CTL_ENABLE		BIT(0)
+#define CCPI2_PERF_CTL_START		BIT(1)
+#define CCPI2_PERF_CTL_RESET		BIT(4)
+#define CCPI2_EVENT_LEVEL_RISING_EDGE	BIT(10)
+#define CCPI2_EVENT_TYPE_EDGE_SENSITIVE	BIT(11)
+
 enum tx2_uncore_type {
 	PMU_TYPE_L3C,
 	PMU_TYPE_DMC,
+	PMU_TYPE_CCPI2,
 	PMU_TYPE_INVALID,
 };
 
 /*
- * pmu on each socket has 2 uncore devices(dmc and l3c),
- * each device has 4 counters.
+ * Each socket has 3 uncore devices associated with a PMU. The DMC and
+ * L3C have 4 32-bit counters and the CCPI2 has 8 64-bit counters.
  */
 struct tx2_uncore_pmu {
 	struct hlist_node hpnode;
@@ -69,8 +95,10 @@ struct tx2_uncore_pmu {
 	int node;
 	int cpu;
 	u32 max_counters;
+	u32 counters_mask;
 	u32 prorate_factor;
 	u32 max_events;
+	u32 events_mask;
 	u64 hrtimer_interval;
 	void __iomem *base;
 	DECLARE_BITMAP(active_counters, TX2_PMU_MAX_COUNTERS);
@@ -92,7 +120,21 @@ static inline struct tx2_uncore_pmu *pmu_to_tx2_pmu(struct pmu *pmu)
 	return container_of(pmu, struct tx2_uncore_pmu, pmu);
 }
 
-PMU_FORMAT_ATTR(event,	"config:0-4");
+#define TX2_PMU_FORMAT_ATTR(_var, _name, _format)			\
+static ssize_t								\
+__tx2_pmu_##_var##_show(struct device *dev,				\
+			       struct device_attribute *attr,		\
+			       char *page)				\
+{									\
+	BUILD_BUG_ON(sizeof(_format) >= PAGE_SIZE);			\
+	return sprintf(page, _format "\n");				\
+}									\
+									\
+static struct device_attribute format_attr_##_var =			\
+	__ATTR(_name, 0444, __tx2_pmu_##_var##_show, NULL)
+
+TX2_PMU_FORMAT_ATTR(event, event, "config:0-4");
+TX2_PMU_FORMAT_ATTR(event_ccpi2, event, "config:0-9");
 
 static struct attribute *l3c_pmu_format_attrs[] = {
 	&format_attr_event.attr,
@@ -104,6 +146,11 @@ static struct attribute *dmc_pmu_format_attrs[] = {
 	NULL,
 };
 
+static struct attribute *ccpi2_pmu_format_attrs[] = {
+	&format_attr_event_ccpi2.attr,
+	NULL,
+};
+
 static const struct attribute_group l3c_pmu_format_attr_group = {
 	.name = "format",
 	.attrs = l3c_pmu_format_attrs,
@@ -114,6 +161,11 @@ static const struct attribute_group dmc_pmu_format_attr_group = {
 	.attrs = dmc_pmu_format_attrs,
 };
 
+static const struct attribute_group ccpi2_pmu_format_attr_group = {
+	.name = "format",
+	.attrs = ccpi2_pmu_format_attrs,
+};
+
 /*
  * sysfs event attributes
  */
@@ -164,6 +216,19 @@ static struct attribute *dmc_pmu_events_attrs[] = {
 	NULL,
 };
 
+TX2_EVENT_ATTR(req_pktsent, CCPI2_EVENT_REQ_PKT_SENT);
+TX2_EVENT_ATTR(snoop_pktsent, CCPI2_EVENT_SNOOP_PKT_SENT);
+TX2_EVENT_ATTR(data_pktsent, CCPI2_EVENT_DATA_PKT_SENT);
+TX2_EVENT_ATTR(gic_pktsent, CCPI2_EVENT_GIC_PKT_SENT);
+
+static struct attribute *ccpi2_pmu_events_attrs[] = {
+	&tx2_pmu_event_attr_req_pktsent.attr.attr,
+	&tx2_pmu_event_attr_snoop_pktsent.attr.attr,
+	&tx2_pmu_event_attr_data_pktsent.attr.attr,
+	&tx2_pmu_event_attr_gic_pktsent.attr.attr,
+	NULL,
+};
+
 static const struct attribute_group l3c_pmu_events_attr_group = {
 	.name = "events",
 	.attrs = l3c_pmu_events_attrs,
@@ -174,6 +239,11 @@ static const struct attribute_group dmc_pmu_events_attr_group = {
 	.attrs = dmc_pmu_events_attrs,
 };
 
+static const struct attribute_group ccpi2_pmu_events_attr_group = {
+	.name = "events",
+	.attrs = ccpi2_pmu_events_attrs,
+};
+
 /*
  * sysfs cpumask attributes
  */
@@ -213,6 +283,13 @@ static const struct attribute_group *dmc_pmu_attr_groups[] = {
 	NULL
 };
 
+static const struct attribute_group *ccpi2_pmu_attr_groups[] = {
+	&ccpi2_pmu_format_attr_group,
+	&pmu_cpumask_attr_group,
+	&ccpi2_pmu_events_attr_group,
+	NULL
+};
+
 static inline u32 reg_readl(unsigned long addr)
 {
 	return readl((void __iomem *)addr);
@@ -245,33 +322,58 @@ static void init_cntr_base_l3c(struct perf_event *event,
 		struct tx2_uncore_pmu *tx2_pmu)
 {
 	struct hw_perf_event *hwc = &event->hw;
+	u32 cmask;
+
+	tx2_pmu = pmu_to_tx2_pmu(event->pmu);
+	cmask = tx2_pmu->counters_mask;
 
 	/* counter ctrl/data reg offset at 8 */
 	hwc->config_base = (unsigned long)tx2_pmu->base
-		+ L3C_COUNTER_CTL + (8 * GET_COUNTERID(event));
+		+ L3C_COUNTER_CTL + (8 * GET_COUNTERID(event, cmask));
 	hwc->event_base =  (unsigned long)tx2_pmu->base
-		+ L3C_COUNTER_DATA + (8 * GET_COUNTERID(event));
+		+ L3C_COUNTER_DATA + (8 * GET_COUNTERID(event, cmask));
 }
 
 static void init_cntr_base_dmc(struct perf_event *event,
 		struct tx2_uncore_pmu *tx2_pmu)
 {
 	struct hw_perf_event *hwc = &event->hw;
+	u32 cmask;
+
+	tx2_pmu = pmu_to_tx2_pmu(event->pmu);
+	cmask = tx2_pmu->counters_mask;
 
 	hwc->config_base = (unsigned long)tx2_pmu->base
 		+ DMC_COUNTER_CTL;
 	/* counter data reg offset at 0xc */
 	hwc->event_base = (unsigned long)tx2_pmu->base
-		+ DMC_COUNTER_DATA + (0xc * GET_COUNTERID(event));
+		+ DMC_COUNTER_DATA + (0xc * GET_COUNTERID(event, cmask));
+}
+
+static void init_cntr_base_ccpi2(struct perf_event *event,
+		struct tx2_uncore_pmu *tx2_pmu)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	u32 cmask;
+
+	cmask = tx2_pmu->counters_mask;
+
+	hwc->config_base = (unsigned long)tx2_pmu->base
+		+ CCPI2_COUNTER_CTL + (4 * GET_COUNTERID(event, cmask));
+	hwc->event_base =  (unsigned long)tx2_pmu->base;
 }
 
 static void uncore_start_event_l3c(struct perf_event *event, int flags)
 {
-	u32 val;
+	u32 val, emask;
 	struct hw_perf_event *hwc = &event->hw;
+	struct tx2_uncore_pmu *tx2_pmu;
+
+	tx2_pmu = pmu_to_tx2_pmu(event->pmu);
+	emask = tx2_pmu->events_mask;
 
 	/* event id encoded in bits [07:03] */
-	val = GET_EVENTID(event) << 3;
+	val = GET_EVENTID(event, emask) << 3;
 	reg_writel(val, hwc->config_base);
 	local64_set(&hwc->prev_count, 0);
 	reg_writel(0, hwc->event_base);
@@ -284,10 +386,17 @@ static inline void uncore_stop_event_l3c(struct perf_event *event)
 
 static void uncore_start_event_dmc(struct perf_event *event, int flags)
 {
-	u32 val;
+	u32 val, cmask, emask;
 	struct hw_perf_event *hwc = &event->hw;
-	int idx = GET_COUNTERID(event);
-	int event_id = GET_EVENTID(event);
+	struct tx2_uncore_pmu *tx2_pmu;
+	int idx, event_id;
+
+	tx2_pmu = pmu_to_tx2_pmu(event->pmu);
+	cmask = tx2_pmu->counters_mask;
+	emask = tx2_pmu->events_mask;
+
+	idx = GET_COUNTERID(event, cmask);
+	event_id = GET_EVENTID(event, emask);
 
 	/* enable and start counters.
 	 * 8 bits for each counter, bits[05:01] of a counter to set event type.
@@ -302,9 +411,14 @@ static void uncore_start_event_dmc(struct perf_event *event, int flags)
 
 static void uncore_stop_event_dmc(struct perf_event *event)
 {
-	u32 val;
+	u32 val, cmask;
 	struct hw_perf_event *hwc = &event->hw;
-	int idx = GET_COUNTERID(event);
+	struct tx2_uncore_pmu *tx2_pmu;
+	int idx;
+
+	tx2_pmu = pmu_to_tx2_pmu(event->pmu);
+	cmask = tx2_pmu->counters_mask;
+	idx = GET_COUNTERID(event, cmask);
 
 	/* clear event type(bits[05:01]) to stop counter */
 	val = reg_readl(hwc->config_base);
@@ -312,27 +426,72 @@ static void uncore_stop_event_dmc(struct perf_event *event)
 	reg_writel(val, hwc->config_base);
 }
 
+static void uncore_start_event_ccpi2(struct perf_event *event, int flags)
+{
+	u32 emask;
+	struct hw_perf_event *hwc = &event->hw;
+	struct tx2_uncore_pmu *tx2_pmu;
+
+	tx2_pmu = pmu_to_tx2_pmu(event->pmu);
+	emask = tx2_pmu->events_mask;
+
+	/* Bit [09:00] to set event id.
+	 * Bits [10], set level to rising edge.
+	 * Bits [11], set type to edge sensitive.
+	 */
+	reg_writel((CCPI2_EVENT_TYPE_EDGE_SENSITIVE |
+			CCPI2_EVENT_LEVEL_RISING_EDGE |
+			GET_EVENTID(event, emask)), hwc->config_base);
+
+	/* reset[4], enable[0] and start[1] counters */
+	reg_writel(CCPI2_PERF_CTL_RESET |
+			CCPI2_PERF_CTL_START |
+			CCPI2_PERF_CTL_ENABLE,
+			hwc->event_base + CCPI2_PERF_CTL);
+	local64_set(&event->hw.prev_count, 0ULL);
+}
+
+static void uncore_stop_event_ccpi2(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	/* disable and stop counter */
+	reg_writel(0, hwc->event_base + CCPI2_PERF_CTL);
+}
+
 static void tx2_uncore_event_update(struct perf_event *event)
 {
-	s64 prev, delta, new = 0;
+	u64 prev, delta, new = 0;
 	struct hw_perf_event *hwc = &event->hw;
 	struct tx2_uncore_pmu *tx2_pmu;
 	enum tx2_uncore_type type;
 	u32 prorate_factor;
+	u32 cmask, emask;
 
 	tx2_pmu = pmu_to_tx2_pmu(event->pmu);
 	type = tx2_pmu->type;
+	cmask = tx2_pmu->counters_mask;
+	emask = tx2_pmu->events_mask;
 	prorate_factor = tx2_pmu->prorate_factor;
-
-	new = reg_readl(hwc->event_base);
-	prev = local64_xchg(&hwc->prev_count, new);
-
-	/* handles rollover of 32 bit counter */
-	delta = (u32)(((1UL << 32) - prev) + new);
+	if (type == PMU_TYPE_CCPI2) {
+		reg_writel(CCPI2_COUNTER_OFFSET +
+				GET_COUNTERID(event, cmask),
+				hwc->event_base + CCPI2_COUNTER_SEL);
+		new = reg_readl(hwc->event_base + CCPI2_COUNTER_DATA_H);
+		new = (new << 32) +
+			reg_readl(hwc->event_base + CCPI2_COUNTER_DATA_L);
+		prev = local64_xchg(&hwc->prev_count, new);
+		delta = new - prev;
+	} else {
+		new = reg_readl(hwc->event_base);
+		prev = local64_xchg(&hwc->prev_count, new);
+		/* handles rollover of 32 bit counter */
+		delta = (u32)(((1UL << 32) - prev) + new);
+	}
 
 	/* DMC event data_transfers granularity is 16 Bytes, convert it to 64 */
 	if (type == PMU_TYPE_DMC &&
-			GET_EVENTID(event) == DMC_EVENT_DATA_TRANSFERS)
+			GET_EVENTID(event, emask) == DMC_EVENT_DATA_TRANSFERS)
 		delta = delta/4;
 
 	/* L3C and DMC has 16 and 8 interleave channels respectively.
@@ -351,6 +510,7 @@ static enum tx2_uncore_type get_tx2_pmu_type(struct acpi_device *adev)
 	} devices[] = {
 		{"CAV901D", PMU_TYPE_L3C},
 		{"CAV901F", PMU_TYPE_DMC},
+		{"CAV901E", PMU_TYPE_CCPI2},
 		{"", PMU_TYPE_INVALID}
 	};
 
@@ -380,7 +540,8 @@ static bool tx2_uncore_validate_event(struct pmu *pmu,
  * Make sure the group of events can be scheduled at once
  * on the PMU.
  */
-static bool tx2_uncore_validate_event_group(struct perf_event *event)
+static bool tx2_uncore_validate_event_group(struct perf_event *event,
+		int max_counters)
 {
 	struct perf_event *sibling, *leader = event->group_leader;
 	int counters = 0;
@@ -403,7 +564,7 @@ static bool tx2_uncore_validate_event_group(struct perf_event *event)
 	 * If the group requires more counters than the HW has,
 	 * it cannot ever be scheduled.
 	 */
-	return counters <= TX2_PMU_MAX_COUNTERS;
+	return counters <= max_counters;
 }
 
 
@@ -439,7 +600,7 @@ static int tx2_uncore_event_init(struct perf_event *event)
 	hwc->config = event->attr.config;
 
 	/* Validate the group */
-	if (!tx2_uncore_validate_event_group(event))
+	if (!tx2_uncore_validate_event_group(event, tx2_pmu->max_counters))
 		return -EINVAL;
 
 	return 0;
@@ -456,6 +617,10 @@ static void tx2_uncore_event_start(struct perf_event *event, int flags)
 	tx2_pmu->start_event(event, flags);
 	perf_event_update_userpage(event);
 
+	/* No hrtimer needed for CCPI2, 64-bit counters */
+	if (!tx2_pmu->hrtimer.function)
+		return;
+
 	/* Start timer for first event */
 	if (bitmap_weight(tx2_pmu->active_counters,
 				tx2_pmu->max_counters) == 1) {
@@ -510,11 +675,13 @@ static void tx2_uncore_event_del(struct perf_event *event, int flags)
 {
 	struct tx2_uncore_pmu *tx2_pmu = pmu_to_tx2_pmu(event->pmu);
 	struct hw_perf_event *hwc = &event->hw;
+	u32 cmask;
 
+	cmask = tx2_pmu->counters_mask;
 	tx2_uncore_event_stop(event, PERF_EF_UPDATE);
 
 	/* clear the assigned counter */
-	free_counter(tx2_pmu, GET_COUNTERID(event));
+	free_counter(tx2_pmu, GET_COUNTERID(event, cmask));
 
 	perf_event_update_userpage(event);
 	tx2_pmu->events[hwc->idx] = NULL;
@@ -580,8 +747,10 @@ static int tx2_uncore_pmu_add_dev(struct tx2_uncore_pmu *tx2_pmu)
 			cpu_online_mask);
 
 	tx2_pmu->cpu = cpu;
-	hrtimer_init(&tx2_pmu->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	tx2_pmu->hrtimer.function = tx2_hrtimer_callback;
+
+	if (tx2_pmu->hrtimer.function)
+		hrtimer_init(&tx2_pmu->hrtimer,
+				CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 
 	ret = tx2_uncore_pmu_register(tx2_pmu);
 	if (ret) {
@@ -653,10 +822,13 @@ static struct tx2_uncore_pmu *tx2_uncore_pmu_init_dev(struct device *dev,
 
 	switch (tx2_pmu->type) {
 	case PMU_TYPE_L3C:
-		tx2_pmu->max_counters = TX2_PMU_MAX_COUNTERS;
+		tx2_pmu->max_counters = TX2_PMU_DMC_L3C_MAX_COUNTERS;
+		tx2_pmu->counters_mask = 0x3;
 		tx2_pmu->prorate_factor = TX2_PMU_L3_TILES;
 		tx2_pmu->max_events = L3_EVENT_MAX;
+		tx2_pmu->events_mask = 0x1f;
 		tx2_pmu->hrtimer_interval = TX2_PMU_HRTIMER_INTERVAL;
+		tx2_pmu->hrtimer.function = tx2_hrtimer_callback;
 		tx2_pmu->attr_groups = l3c_pmu_attr_groups;
 		tx2_pmu->name = devm_kasprintf(dev, GFP_KERNEL,
 				"uncore_l3c_%d", tx2_pmu->node);
@@ -665,10 +837,13 @@ static struct tx2_uncore_pmu *tx2_uncore_pmu_init_dev(struct device *dev,
 		tx2_pmu->stop_event = uncore_stop_event_l3c;
 		break;
 	case PMU_TYPE_DMC:
-		tx2_pmu->max_counters = TX2_PMU_MAX_COUNTERS;
+		tx2_pmu->max_counters = TX2_PMU_DMC_L3C_MAX_COUNTERS;
+		tx2_pmu->counters_mask = 0x3;
 		tx2_pmu->prorate_factor = TX2_PMU_DMC_CHANNELS;
 		tx2_pmu->max_events = DMC_EVENT_MAX;
+		tx2_pmu->events_mask = 0x1f;
 		tx2_pmu->hrtimer_interval = TX2_PMU_HRTIMER_INTERVAL;
+		tx2_pmu->hrtimer.function = tx2_hrtimer_callback;
 		tx2_pmu->attr_groups = dmc_pmu_attr_groups;
 		tx2_pmu->name = devm_kasprintf(dev, GFP_KERNEL,
 				"uncore_dmc_%d", tx2_pmu->node);
@@ -676,6 +851,21 @@ static struct tx2_uncore_pmu *tx2_uncore_pmu_init_dev(struct device *dev,
 		tx2_pmu->start_event = uncore_start_event_dmc;
 		tx2_pmu->stop_event = uncore_stop_event_dmc;
 		break;
+	case PMU_TYPE_CCPI2:
+		/* CCPI2 has 8 counters */
+		tx2_pmu->max_counters = TX2_PMU_CCPI2_MAX_COUNTERS;
+		tx2_pmu->counters_mask = 0x7;
+		tx2_pmu->prorate_factor = 1;
+		tx2_pmu->max_events = CCPI2_EVENT_MAX;
+		tx2_pmu->events_mask = 0x1ff;
+		tx2_pmu->attr_groups = ccpi2_pmu_attr_groups;
+		tx2_pmu->name = devm_kasprintf(dev, GFP_KERNEL,
+				"uncore_ccpi2_%d", tx2_pmu->node);
+		tx2_pmu->init_cntr_base = init_cntr_base_ccpi2;
+		tx2_pmu->start_event = uncore_start_event_ccpi2;
+		tx2_pmu->stop_event = uncore_stop_event_ccpi2;
+		tx2_pmu->hrtimer.function = NULL;
+		break;
 	case PMU_TYPE_INVALID:
 		devm_kfree(dev, tx2_pmu);
 		return NULL;
@@ -744,7 +934,9 @@ static int tx2_uncore_pmu_offline_cpu(unsigned int cpu,
 	if (cpu != tx2_pmu->cpu)
 		return 0;
 
-	hrtimer_cancel(&tx2_pmu->hrtimer);
+	if (tx2_pmu->hrtimer.function)
+		hrtimer_cancel(&tx2_pmu->hrtimer);
+
 	cpumask_copy(&cpu_online_mask_temp, cpu_online_mask);
 	cpumask_clear_cpu(cpu, &cpu_online_mask_temp);
 	new_cpu = cpumask_any_and(
-- 
2.17.1