From: Babu Moger <babu.moger@amd.com>
To: <corbet@lwn.net>, <reinette.chatre@intel.com>,
<tglx@linutronix.de>, <mingo@redhat.com>, <bp@alien8.de>
Cc: <fenghua.yu@intel.com>, <dave.hansen@linux.intel.com>,
<x86@kernel.org>, <hpa@zytor.com>, <paulmck@kernel.org>,
<akpm@linux-foundation.org>, <quic_neeraju@quicinc.com>,
<rdunlap@infradead.org>, <damien.lemoal@opensource.wdc.com>,
<songmuchun@bytedance.com>, <peterz@infradead.org>,
<jpoimboe@kernel.org>, <pbonzini@redhat.com>,
<babu.moger@amd.com>, <chang.seok.bae@intel.com>,
<pawan.kumar.gupta@linux.intel.com>, <jmattson@google.com>,
<daniel.sneddon@linux.intel.com>, <sandipan.das@amd.com>,
<tony.luck@intel.com>, <james.morse@arm.com>,
<linux-doc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<bagasdotme@gmail.com>, <eranian@google.com>,
<christophe.leroy@csgroup.eu>,
<pawan.kumar.gupta@linux.intel.com>, <jarkko@kernel.org>,
<adrian.hunter@intel.com>, <quic_jiles@quicinc.com>,
<peternewman@google.com>
Subject: [PATCH v9 10/13] x86/resctrl: Add sysfs interface to write mbm_total_bytes_config
Date: Thu, 1 Dec 2022 09:37:10 -0600 [thread overview]
Message-ID: <166990903030.17806.5106229901730558377.stgit@bmoger-ubuntu> (raw)
In-Reply-To: <166990882621.17806.16780480657453071426.stgit@bmoger-ubuntu>
The current event configuration for mbm_total_bytes can be changed by
the user by writing to the file
/sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config.
The event configuration settings are domain specific and will affect all
the CPUs in the domain.
Following are the types of events supported:
==== ===========================================================
Bits Description
==== ===========================================================
6 Dirty Victims from the QOS domain to all types of memory
5 Reads to slow memory in the non-local NUMA domain
4 Reads to slow memory in the local NUMA domain
3 Non-temporal writes to non-local NUMA domain
2 Non-temporal writes to local NUMA domain
1 Reads to memory in the non-local NUMA domain
0 Reads to memory in the local NUMA domain
==== ===========================================================
For example:
To change the mbm_total_bytes to count only reads on domain 0, the bits
0, 1, 4 and 5 needs to be set, which is 110011b (in hex 0x33). Run the
command.
$echo 0=0x33 > /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config
To change the mbm_total_bytes to count all the slow memory reads on
domain 1, the bits 4 and 5 needs to be set which is 110000b (in hex 0x30).
Run the command.
$echo 1=0x30 > /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config
Signed-off-by: Babu Moger <babu.moger@amd.com>
---
arch/x86/kernel/cpu/resctrl/monitor.c | 13 +++
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 127 ++++++++++++++++++++++++++++++++
include/linux/resctrl.h | 10 +++
3 files changed, 149 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 7c8a3a745041..b265856835de 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -176,6 +176,19 @@ void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_domain *d,
memset(am, 0, sizeof(*am));
}
+void resctrl_arch_reset_rmid_all(struct rdt_resource *r, struct rdt_domain *d)
+{
+ struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d);
+
+ if (is_mbm_total_enabled())
+ memset(hw_dom->arch_mbm_total, 0,
+ sizeof(*hw_dom->arch_mbm_total) * r->num_rmid);
+
+ if (is_mbm_local_enabled())
+ memset(hw_dom->arch_mbm_local, 0,
+ sizeof(*hw_dom->arch_mbm_local) * r->num_rmid);
+}
+
static u64 mbm_overflow_count(u64 prev_msr, u64 cur_msr, unsigned int width)
{
u64 shift = 64 - width, chunks;
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 580f3cce19e2..8a22a652a6e8 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -1517,6 +1517,130 @@ static int mbm_local_bytes_config_show(struct kernfs_open_file *of,
return 0;
}
+static void mon_event_config_write(void *info)
+{
+ struct mon_config_info *mon_info = info;
+ u32 index;
+
+ index = mon_event_config_index_get(mon_info->evtid);
+ if (index == INVALID_CONFIG_INDEX) {
+ pr_warn_once("Invalid event id %d\n", mon_info->evtid);
+ return;
+ }
+ wrmsr(MSR_IA32_EVT_CFG_BASE + index, mon_info->mon_config, 0);
+}
+
+static int mbm_config_write_domain(struct rdt_resource *r,
+ struct rdt_domain *d, u32 evtid, u32 val)
+{
+ struct mon_config_info mon_info = {0};
+ int ret = 0;
+
+ /* mon_config cannot be more than the supported set of events */
+ if (val > MAX_EVT_CONFIG_BITS) {
+ rdt_last_cmd_puts("Invalid event configuration\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Read the current config value first. If both are the same then
+ * no need to write it again.
+ */
+ mon_info.evtid = evtid;
+ mondata_config_read(d, &mon_info);
+ if (mon_info.mon_config == val)
+ goto out;
+
+ mon_info.mon_config = val;
+
+ /*
+ * Update MSR_IA32_EVT_CFG_BASE MSRs on all the CPUs in the
+ * domain. The MSRs offset from MSR MSR_IA32_EVT_CFG_BASE
+ * are scoped at the domain level. Writing any of these MSRs
+ * on one CPU is supposed to be observed by all CPUs in the
+ * domain. However, the hardware team recommends to update
+ * these MSRs on all the CPUs in the domain.
+ */
+ on_each_cpu_mask(&d->cpu_mask, mon_event_config_write, &mon_info, 1);
+
+ /*
+ * When an Event Configuration is changed, the bandwidth counters
+ * for all RMIDs and Events will be cleared by the hardware. The
+ * hardware also sets MSR_IA32_QM_CTR.Unavailable (bit 62) for
+ * every RMID on the next read to any event for every RMID.
+ * Subsequent reads will have MSR_IA32_QM_CTR.Unavailable (bit 62)
+ * cleared while it is tracked by the hardware. Clear the
+ * mbm_local and mbm_total counts for all the RMIDs.
+ */
+ resctrl_arch_reset_rmid_all(r, d);
+
+out:
+ return ret;
+}
+
+static int mon_config_write(struct rdt_resource *r, char *tok, u32 evtid)
+{
+ char *dom_str = NULL, *id_str;
+ unsigned long dom_id, val;
+ struct rdt_domain *d;
+ int ret = 0;
+
+next:
+ if (!tok || tok[0] == '\0')
+ return 0;
+
+ /* Start processing the strings for each domain */
+ dom_str = strim(strsep(&tok, ";"));
+ id_str = strsep(&dom_str, "=");
+
+ if (!id_str || kstrtoul(id_str, 10, &dom_id)) {
+ rdt_last_cmd_puts("Missing '=' or non-numeric domain id\n");
+ return -EINVAL;
+ }
+
+ if (!dom_str || kstrtoul(dom_str, 16, &val)) {
+ rdt_last_cmd_puts("Non-numeric event configuration value\n");
+ return -EINVAL;
+ }
+
+ list_for_each_entry(d, &r->domains, list) {
+ if (d->id == dom_id) {
+ ret = mbm_config_write_domain(r, d, evtid, val);
+ if (ret)
+ return -EINVAL;
+ goto next;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static ssize_t mbm_total_bytes_config_write(struct kernfs_open_file *of,
+ char *buf, size_t nbytes,
+ loff_t off)
+{
+ struct rdt_resource *r = of->kn->parent->priv;
+ int ret;
+
+ /* Valid input requires a trailing newline */
+ if (nbytes == 0 || buf[nbytes - 1] != '\n')
+ return -EINVAL;
+
+ cpus_read_lock();
+ mutex_lock(&rdtgroup_mutex);
+
+ rdt_last_cmd_clear();
+
+ buf[nbytes - 1] = '\0';
+
+ ret = mon_config_write(r, buf, QOS_L3_MBM_TOTAL_EVENT_ID);
+
+ mutex_unlock(&rdtgroup_mutex);
+ cpus_read_unlock();
+
+ return ret ?: nbytes;
+}
+
/* rdtgroup information files for one cache resource. */
static struct rftype res_common_files[] = {
{
@@ -1617,9 +1741,10 @@ static struct rftype res_common_files[] = {
},
{
.name = "mbm_total_bytes_config",
- .mode = 0444,
+ .mode = 0644,
.kf_ops = &rdtgroup_kf_single_ops,
.seq_show = mbm_total_bytes_config_show,
+ .write = mbm_total_bytes_config_write,
},
{
.name = "mbm_local_bytes_config",
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index 0cee154abc9f..e4dc65892446 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -250,6 +250,16 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_domain *d,
u32 rmid, enum resctrl_event_id eventid);
+/**
+ * resctrl_arch_reset_rmid_all() - Reset any private state associated with
+ * all the rmids.
+ * @r: The domain's resource.
+ * @d: The rmid's domain.
+ *
+ * This can be called from any CPU.
+ */
+void resctrl_arch_reset_rmid_all(struct rdt_resource *r, struct rdt_domain *d);
+
extern unsigned int resctrl_rmid_realloc_threshold;
extern unsigned int resctrl_rmid_realloc_limit;
next prev parent reply other threads:[~2022-12-01 15:37 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-01 15:35 [PATCH v9 00/13] Support for AMD QoS new features Babu Moger
2022-12-01 15:36 ` [PATCH v9 01/13] x86/cpufeatures: Add Slow Memory Bandwidth Allocation feature flag Babu Moger
2022-12-15 17:08 ` Reinette Chatre
2022-12-15 21:10 ` Moger, Babu
2022-12-01 15:36 ` [PATCH v9 02/13] x86/resctrl: Add a new resource type RDT_RESOURCE_SMBA Babu Moger
2022-12-15 17:10 ` Reinette Chatre
2022-12-15 21:30 ` Moger, Babu
2022-12-01 15:36 ` [PATCH v9 03/13] x86/cpufeatures: Add Bandwidth Monitoring Event Configuration feature flag Babu Moger
2022-12-15 17:11 ` Reinette Chatre
2022-12-19 15:31 ` Moger, Babu
2022-12-01 15:36 ` [PATCH v9 04/13] x86/resctrl: Include new features in command line options Babu Moger
2022-12-15 17:12 ` Reinette Chatre
2022-12-19 15:33 ` Moger, Babu
2022-12-01 15:36 ` [PATCH v9 05/13] x86/resctrl: Detect and configure Slow Memory Bandwidth Allocation Babu Moger
2022-12-15 17:13 ` Reinette Chatre
2022-12-19 15:34 ` Moger, Babu
2022-12-01 15:36 ` [PATCH v9 06/13] x86/resctrl: Add __init attribute to rdt_get_mon_l3_config() Babu Moger
2022-12-15 17:17 ` Reinette Chatre
2022-12-19 15:51 ` Moger, Babu
2022-12-01 15:36 ` [PATCH v9 07/13] x86/resctrl: Introduce data structure to support monitor configuration Babu Moger
2022-12-15 17:19 ` Reinette Chatre
2022-12-19 17:56 ` Moger, Babu
2022-12-01 15:36 ` [PATCH v9 08/13] x86/resctrl: Add sysfs interface to read mbm_total_bytes_config Babu Moger
2022-12-15 17:40 ` Reinette Chatre
2022-12-19 18:21 ` Moger, Babu
2022-12-01 15:37 ` [PATCH v9 09/13] x86/resctrl: Add sysfs interface to read mbm_local_bytes_config Babu Moger
2022-12-15 17:43 ` Reinette Chatre
2022-12-19 18:27 ` Moger, Babu
2022-12-01 15:37 ` Babu Moger [this message]
2022-12-15 18:24 ` [PATCH v9 10/13] x86/resctrl: Add sysfs interface to write mbm_total_bytes_config Reinette Chatre
2022-12-19 19:28 ` Moger, Babu
2022-12-20 17:32 ` Reinette Chatre
2022-12-20 18:58 ` Moger, Babu
2022-12-19 19:50 ` Moger, Babu
2022-12-20 17:32 ` Reinette Chatre
2022-12-20 18:00 ` Moger, Babu
2022-12-01 15:37 ` [PATCH v9 11/13] x86/resctrl: Add sysfs interface to write mbm_local_bytes_config Babu Moger
2022-12-15 18:25 ` Reinette Chatre
2022-12-19 19:51 ` Moger, Babu
2022-12-01 15:37 ` [PATCH v9 12/13] x86/resctrl: Replace smp_call_function_many() with on_each_cpu_mask() Babu Moger
2022-12-15 18:26 ` Reinette Chatre
2022-12-19 19:59 ` Moger, Babu
2022-12-01 15:37 ` [PATCH v9 13/13] Documentation/x86: Update resctrl.rst for new features Babu Moger
2022-12-15 18:30 ` Reinette Chatre
2022-12-19 20:05 ` Moger, Babu
2022-12-15 15:08 ` [PATCH v9 00/13] Support for AMD QoS " Moger, Babu
2022-12-15 15:35 ` Reinette Chatre
2022-12-15 16:12 ` Moger, Babu
2022-12-15 18:38 ` Reinette Chatre
2022-12-19 20:57 ` Moger, Babu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=166990903030.17806.5106229901730558377.stgit@bmoger-ubuntu \
--to=babu.moger@amd.com \
--cc=adrian.hunter@intel.com \
--cc=akpm@linux-foundation.org \
--cc=bagasdotme@gmail.com \
--cc=bp@alien8.de \
--cc=chang.seok.bae@intel.com \
--cc=christophe.leroy@csgroup.eu \
--cc=corbet@lwn.net \
--cc=damien.lemoal@opensource.wdc.com \
--cc=daniel.sneddon@linux.intel.com \
--cc=dave.hansen@linux.intel.com \
--cc=eranian@google.com \
--cc=fenghua.yu@intel.com \
--cc=hpa@zytor.com \
--cc=james.morse@arm.com \
--cc=jarkko@kernel.org \
--cc=jmattson@google.com \
--cc=jpoimboe@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=paulmck@kernel.org \
--cc=pawan.kumar.gupta@linux.intel.com \
--cc=pbonzini@redhat.com \
--cc=peternewman@google.com \
--cc=peterz@infradead.org \
--cc=quic_jiles@quicinc.com \
--cc=quic_neeraju@quicinc.com \
--cc=rdunlap@infradead.org \
--cc=reinette.chatre@intel.com \
--cc=sandipan.das@amd.com \
--cc=songmuchun@bytedance.com \
--cc=tglx@linutronix.de \
--cc=tony.luck@intel.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox