From: Robert Budai <robert.budai@analog.com>
To: Nuno Sa <nuno.sa@analog.com>,
Ramona Gradinariu <ramona.gradinariu@analog.com>,
Antoniu Miclaus <antoniu.miclaus@analog.com>,
Robert Budai <robert.budai@analog.com>,
Lars-Peter Clausen <lars@metafoo.de>,
Michael Hennerich <Michael.Hennerich@analog.com>,
Jonathan Cameron <jic23@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jonathan Corbet <corbet@lwn.net>, <linux-iio@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-doc@vger.kernel.org>
Subject: [RESEND PATCH v8 4/6] dt-bindings: iio: Add adis16550 bindings
Date: Mon, 17 Feb 2025 12:57:48 +0200 [thread overview]
Message-ID: <20250217105753.605465-5-robert.budai@analog.com> (raw)
In-Reply-To: <20250217105753.605465-1-robert.budai@analog.com>
Document the ADIS16550 device devicetree bindings.
Co-developed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Signed-off-by: Robert Budai <robert.budai@analog.com>
---
v8:
- added extra blank lines
- changes reset-gpios description according to suggested changes
.../bindings/iio/imu/adi,adis16550.yaml | 74 +++++++++++++++++++
MAINTAINERS | 10 +++
2 files changed, 84 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
new file mode 100644
index 000000000..a4c273c7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/adi,adis16550.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADIS16550 and similar IMUs
+
+maintainers:
+ - Nuno Sa <nuno.sa@analog.com>
+ - Ramona Gradinariu <ramona.gradinariu@analog.com>
+ - Antoniu Miclaus <antoniu.miclaus@analog.com>
+ - Robert Budai <robert.budai@analog.com>
+
+properties:
+ compatible:
+ enum:
+ - adi,adis16550
+
+ reg:
+ maxItems: 1
+
+ spi-cpha: true
+
+ spi-cpol: true
+
+ spi-max-frequency:
+ maximum: 15000000
+
+ vdd-supply: true
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ Active low RESET pin.
+ maxItems: 1
+
+ clocks:
+ description: If not provided, then the internal clock is used.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - spi-cpha
+ - spi-cpol
+ - spi-max-frequency
+ - vdd-supply
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ imu@0 {
+ compatible = "adi,adis16550";
+ reg = <0>;
+ spi-max-frequency = <15000000>;
+ spi-cpol;
+ spi-cpha;
+ vdd-supply = <&vdd>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 25c86f473..d3e6258fa 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1485,6 +1485,16 @@ W: https://ez.analog.com/linux-software-drivers
F: Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
F: drivers/iio/imu/adis16475.c
+ANALOG DEVICES INC ADIS16550 DRIVER
+M: Nuno Sa <nuno.sa@analog.com>
+M: Ramona Gradinariu <ramona.gradinariu@analog.com>
+M: Antoniu Miclaus <antoniu.miclaus@analog.com>
+M: Robert Budai <robert.budai@analog.com>
+L: linux-iio@vger.kernel.org
+S: Supported
+W: https://ez.analog.com/linux-software-drivers
+F: Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
+
ANALOG DEVICES INC ADM1177 DRIVER
M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-hwmon@vger.kernel.org
--
2.34.1
next prev parent reply other threads:[~2025-02-17 13:00 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-17 10:57 [RESEND PATCH v8 0/6] Add support for ADIS16550 Robert Budai
2025-02-17 10:57 ` [RESEND PATCH v8 1/6] iio: imu: adis: Add custom ops struct Robert Budai
2025-02-17 10:57 ` [RESEND PATCH v8 2/6] iio: imu: adis: Add reset to custom ops Robert Budai
2025-02-17 10:57 ` [RESEND PATCH v8 3/6] iio: imu: adis: Add DIAG_STAT register Robert Budai
2025-02-17 10:57 ` Robert Budai [this message]
2025-02-19 23:17 ` [RESEND PATCH v8 4/6] dt-bindings: iio: Add adis16550 bindings Rob Herring (Arm)
2025-02-17 10:57 ` [RESEND PATCH v8 5/6] iio: imu: adis16550: add adis16550 support Robert Budai
2025-02-20 8:21 ` Nuno Sá
2025-02-20 13:43 ` Budai, Robert
2025-02-22 12:38 ` Jonathan Cameron
2025-02-25 9:26 ` Nuno Sá
2025-02-17 10:57 ` [RESEND PATCH v8 6/6] docs: iio: add documentation for adis16550 driver Robert Budai
2025-02-17 14:33 ` [RESEND PATCH v8 0/6] Add support for ADIS16550 Jonathan Cameron
2025-02-22 12:40 ` Jonathan Cameron
2025-03-04 13:17 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250217105753.605465-5-robert.budai@analog.com \
--to=robert.budai@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=antoniu.miclaus@analog.com \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-doc@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=ramona.gradinariu@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox