Re: [PATCH v6 3/8] iio: accel: adxl313: add buffered FIFO watermark with interrupt handling

[Jonathan Cameron <jic23@kernel.org>]

On Sun, 22 Jun 2025 12:29:32 +0000
Lothar Rubusch <l.rubusch@gmail.com> wrote:

> Cover the following tasks:
> - Add scan_mask and scan_index to the IIO channel configuration. The
> scan_index sets up buffer usage. According to the datasheet, the ADXL313
> uses a 13-bit wide data field in full-resolution mode. Set the
> signedness, number of storage bits, and endianness accordingly.
> 
> - Parse the devicetree for an optional interrupt line and configure the
> interrupt mapping based on its presence. If no interrupt line is
> specified, keep the FIFO in bypass mode as currently implemented.
> 
> - Set up the interrupt handler. Add register access to detect and
> evaluate interrupts. Implement functions to clear status registers and
> reset the FIFO.
> 
> - Implement FIFO watermark configuration and handling. Allow the
> watermark level to be set, evaluate the corresponding interrupt, read
> the FIFO contents, and push the data to the IIO channel.
> 
> Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Hi Lothar,

One thing inline. If nothing else comes up I can tweak the naming of that
function whilst applying.

Jonathan

> diff --git a/drivers/iio/accel/adxl313_core.c b/drivers/iio/accel/adxl313_core.c
> index 99a7f3755031..ac4cc16399fc 100644
> --- a/drivers/iio/accel/adxl313_core.c
> +++ b/drivers/iio/accel/adxl313_core.c
> @@ -8,11 +8,23 @@

>  static int adxl313_reg_access(struct iio_dev *indio_dev, unsigned int reg,
>  			      unsigned int writeval, unsigned int *readval)
>  {
> @@ -359,6 +551,7 @@ static const struct iio_info adxl313_info = {
>  	.read_raw	= adxl313_read_raw,
>  	.write_raw	= adxl313_write_raw,
>  	.read_avail	= adxl313_read_freq_avail,
> +	.hwfifo_set_watermark = adxl313_set_watermark,
>  	.debugfs_reg_access = &adxl313_reg_access,
>  };
>  
> @@ -407,6 +600,19 @@ static int adxl313_setup(struct device *dev, struct adxl313_data *data,
>  	return adxl313_set_measure_en(data, true);
>  }
>  
> +static unsigned int _get_int_type(struct device *dev, int *irq)

Andy mentioned this in review of your other series  Intent was an adxl313
prefix which I agree makes sense.


> +{
> +	*irq = fwnode_irq_get_byname(dev_fwnode(dev), "INT1");
> +	if (*irq > 0)
> +		return ADXL313_INT1;
> +
> +	*irq = fwnode_irq_get_byname(dev_fwnode(dev), "INT2");
> +	if (*irq > 0)
> +		return ADXL313_INT2;
> +
> +	return ADXL313_INT_NONE;
> +}