Linux Documentation
 help / color / mirror / Atom feed
From: Leo Yan <leo.yan@arm.com>
To: James Clark <james.clark@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>,
	Mike Leach <mike.leach@linaro.org>,
	Alexander Shishkin <alexander.shishkin@linux.intel.com>,
	Jonathan Corbet <corbet@lwn.net>,
	coresight@lists.linaro.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org
Subject: Re: [PATCH v4 05/13] coresight: Define format attributes with GEN_PMU_FORMAT_ATTR()
Date: Fri, 14 Nov 2025 15:03:43 +0000	[thread overview]
Message-ID: <20251114150343.GE3568724@e132581.arm.com> (raw)
In-Reply-To: <20251112-james-cs-syncfreq-v4-5-165ba21401dc@linaro.org>

On Wed, Nov 12, 2025 at 03:22:11PM +0000, James Clark wrote:
> This allows us to define and consume them in a unified way in later
> commits.
> 
> A lot of the existing code has open coded bit shifts or direct usage of
> whole config values which is error prone and hides which bits are in use
> and which are free.
> 
> Signed-off-by: James Clark <james.clark@linaro.org>

Reviewed-by: Leo Yan <leo.yan@arm.com>

> ---
>  drivers/hwtracing/coresight/coresight-etm-perf.c | 22 ++++++++---------
>  drivers/hwtracing/coresight/coresight-etm-perf.h | 31 ++++++++++++++++++++++++
>  2 files changed, 42 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
> index 91132abca244..d19e2568a0d1 100644
> --- a/drivers/hwtracing/coresight/coresight-etm-perf.c
> +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
> @@ -13,6 +13,7 @@
>  #include <linux/mm.h>
>  #include <linux/init.h>
>  #include <linux/perf_event.h>
> +#include <linux/perf/arm_pmu.h>
>  #include <linux/percpu-defs.h>
>  #include <linux/slab.h>
>  #include <linux/stringhash.h>
> @@ -54,22 +55,21 @@ static DEFINE_PER_CPU(struct coresight_device *, csdev_src);
>   * The PMU formats were orignally for ETMv3.5/PTM's ETMCR 'config';
>   * now take them as general formats and apply on all ETMs.
>   */
> -PMU_FORMAT_ATTR(branch_broadcast, "config:"__stringify(ETM_OPT_BRANCH_BROADCAST));
> -PMU_FORMAT_ATTR(cycacc,		"config:" __stringify(ETM_OPT_CYCACC));
> +GEN_PMU_FORMAT_ATTR(branch_broadcast);
> +GEN_PMU_FORMAT_ATTR(cycacc);
>  /* contextid1 enables tracing CONTEXTIDR_EL1 for ETMv4 */
> -PMU_FORMAT_ATTR(contextid1,	"config:" __stringify(ETM_OPT_CTXTID));
> +GEN_PMU_FORMAT_ATTR(contextid1);
>  /* contextid2 enables tracing CONTEXTIDR_EL2 for ETMv4 */
> -PMU_FORMAT_ATTR(contextid2,	"config:" __stringify(ETM_OPT_CTXTID2));
> -PMU_FORMAT_ATTR(timestamp,	"config:" __stringify(ETM_OPT_TS));
> -PMU_FORMAT_ATTR(retstack,	"config:" __stringify(ETM_OPT_RETSTK));
> +GEN_PMU_FORMAT_ATTR(contextid2);
> +GEN_PMU_FORMAT_ATTR(timestamp);
> +GEN_PMU_FORMAT_ATTR(retstack);
>  /* preset - if sink ID is used as a configuration selector */
> -PMU_FORMAT_ATTR(preset,		"config:0-3");
> +GEN_PMU_FORMAT_ATTR(preset);
>  /* Sink ID - same for all ETMs */
> -PMU_FORMAT_ATTR(sinkid,		"config2:0-31");
> +GEN_PMU_FORMAT_ATTR(sinkid);
>  /* config ID - set if a system configuration is selected */
> -PMU_FORMAT_ATTR(configid,	"config2:32-63");
> -PMU_FORMAT_ATTR(cc_threshold,	"config3:0-11");
> -
> +GEN_PMU_FORMAT_ATTR(configid);
> +GEN_PMU_FORMAT_ATTR(cc_threshold);
>  
>  /*
>   * contextid always traces the "PID".  The PID is in CONTEXTIDR_EL1
> diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.h b/drivers/hwtracing/coresight/coresight-etm-perf.h
> index 5febbcdb8696..c794087a0e99 100644
> --- a/drivers/hwtracing/coresight/coresight-etm-perf.h
> +++ b/drivers/hwtracing/coresight/coresight-etm-perf.h
> @@ -20,6 +20,37 @@ struct cscfg_config_desc;
>   */
>  #define ETM_ADDR_CMP_MAX	8
>  
> +#define ATTR_CFG_FLD_preset_CFG			config
> +#define ATTR_CFG_FLD_preset_LO			0
> +#define ATTR_CFG_FLD_preset_HI			3
> +#define ATTR_CFG_FLD_branch_broadcast_CFG	config
> +#define ATTR_CFG_FLD_branch_broadcast_LO	8
> +#define ATTR_CFG_FLD_branch_broadcast_HI	8
> +#define ATTR_CFG_FLD_cycacc_CFG			config
> +#define ATTR_CFG_FLD_cycacc_LO			12
> +#define ATTR_CFG_FLD_cycacc_HI			12
> +#define ATTR_CFG_FLD_contextid1_CFG		config
> +#define ATTR_CFG_FLD_contextid1_LO		14
> +#define ATTR_CFG_FLD_contextid1_HI		14
> +#define ATTR_CFG_FLD_contextid2_CFG		config
> +#define ATTR_CFG_FLD_contextid2_LO		15
> +#define ATTR_CFG_FLD_contextid2_HI		15
> +#define ATTR_CFG_FLD_timestamp_CFG		config
> +#define ATTR_CFG_FLD_timestamp_LO		28
> +#define ATTR_CFG_FLD_timestamp_HI		28
> +#define ATTR_CFG_FLD_retstack_CFG		config
> +#define ATTR_CFG_FLD_retstack_LO		29
> +#define ATTR_CFG_FLD_retstack_HI		29
> +#define ATTR_CFG_FLD_sinkid_CFG			config2
> +#define ATTR_CFG_FLD_sinkid_LO			0
> +#define ATTR_CFG_FLD_sinkid_HI			31
> +#define ATTR_CFG_FLD_configid_CFG		config2
> +#define ATTR_CFG_FLD_configid_LO		32
> +#define ATTR_CFG_FLD_configid_HI		63
> +#define ATTR_CFG_FLD_cc_threshold_CFG		config3
> +#define ATTR_CFG_FLD_cc_threshold_LO		0
> +#define ATTR_CFG_FLD_cc_threshold_HI		11
> +
>  /**
>   * struct etm_filter - single instruction range or start/stop configuration.
>   * @start_addr:	The address to start tracing on.
> 
> -- 
> 2.34.1
> 

  reply	other threads:[~2025-11-14 15:03 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-12 15:22 [PATCH v4 00/13] coresight: Update timestamp attribute to be an interval instead of bool James Clark
2025-11-12 15:22 ` [PATCH v4 01/13] coresight: Change syncfreq to be a u8 James Clark
2025-11-14 12:20   ` Leo Yan
2025-11-12 15:22 ` [PATCH v4 02/13] coresight: Repack struct etmv4_drvdata James Clark
2025-11-12 15:22 ` [PATCH v4 03/13] coresight: Refactor etm4_config_timestamp_event() James Clark
2025-11-12 15:22 ` [PATCH v4 04/13] coresight: Hide unused ETMv3 format attributes James Clark
2025-11-14 14:55   ` Leo Yan
2025-11-18 14:56     ` James Clark
2025-11-12 15:22 ` [PATCH v4 05/13] coresight: Define format attributes with GEN_PMU_FORMAT_ATTR() James Clark
2025-11-14 15:03   ` Leo Yan [this message]
2025-11-12 15:22 ` [PATCH v4 06/13] coresight: Interpret ETMv3 config with ATTR_CFG_GET_FLD() James Clark
2025-11-14 15:07   ` Leo Yan
2025-11-12 15:22 ` [PATCH v4 07/13] coresight: Don't reject unrecognized ETMv3 format attributes James Clark
2025-11-14 15:18   ` Leo Yan
2025-11-14 15:21     ` James Clark
2025-11-12 15:22 ` [PATCH v4 08/13] coresight: Interpret perf config with ATTR_CFG_GET_FLD() James Clark
2025-11-14 15:30   ` Leo Yan
2025-11-14 15:34     ` James Clark
2025-11-14 15:41       ` Leo Yan
2025-11-12 15:22 ` [PATCH v4 09/13] coresight: Interpret ETMv4 " James Clark
2025-11-14 16:09   ` Leo Yan
2025-11-12 15:22 ` [PATCH v4 10/13] coresight: Remove misleading definitions James Clark
2025-11-14 16:23   ` Leo Yan
2025-11-12 15:22 ` [PATCH v4 11/13] coresight: Extend width of timestamp format attribute James Clark
2025-11-14 17:10   ` Leo Yan
2025-11-12 15:22 ` [PATCH v4 12/13] coresight: Allow setting the timestamp interval James Clark
2025-11-12 15:22 ` [PATCH v4 13/13] coresight: docs: Document etm4x timestamp interval option James Clark
2025-11-14  5:02   ` Randy Dunlap
2025-11-14  9:59     ` James Clark
2025-11-14 18:05   ` Leo Yan
2025-11-18 16:15     ` James Clark

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251114150343.GE3568724@e132581.arm.com \
    --to=leo.yan@arm.com \
    --cc=alexander.shishkin@linux.intel.com \
    --cc=corbet@lwn.net \
    --cc=coresight@lists.linaro.org \
    --cc=james.clark@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mike.leach@linaro.org \
    --cc=suzuki.poulose@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox