[RFC PATCH 0/7] mm/damon/reclaim,lru_sort: monitor all system rams by default

[RFC PATCH 0/7] mm/damon/reclaim,lru_sort: monitor all system rams by default

[SeongJae Park]

DAMON_RECLAIM and DAMON_LRU_SORT set the biggest 'System RAM' resource
of the system as the default monitoring target address range.  The main
intention behind the design is to minimize the overhead coming from
monitoring of non-System RAM areas.

This could result in an odd setup when there are multiple discrete
System RAMs of considerable sizes.  For example, there are System RAMs
each having 500 GiB size.  In this case, only the first 500 GiB will be
set as the monitoring region by default.  This is particularly common on
NUMA systems.  Hence the modules allow users to set the monitoring
target address range using the module parameters if the default setup
doesn't work for them.  In other words, the current design trades ease
of setup for lower overhead.

However, because DAMON utilizes the sampling based access check and the
adaptive regions adjustment mechanisms, the overhead from the monitoring
of non-System RAM areas should be negligible in most setups.  Meanwhile,
the setup complexity is causing real headaches for users who need to run
those modules on various types of systems.  That is, the current
tradeoff is not a good deal.

Set the physical address range that can cover all System RAM areas of
the system as the default monitoring regions for DAMON_RECLAIM and
DAMON_LRU_SORT.

Technically speaking, this is changing documented behavior.  However, it
makes no sense to believe there is a real use case that really depends
on the old weird default behavior.  If the old default behavior was
working for them in the reasonable way, this change will only add a
negligible amount of monitoring overhead.  If it didn't work, the users
may already be using manual monitoring regions setup, and they will not
be affected by this change.

Patches Sequence
================

Patch 1 introduces a new core function that will be used for the new
default monitoring target region setup.  Patch 2 and 3 update
DAMON_RECLAIM and DAMON_LRU_SORT to use the new function instead of the
old one, respectively.  Patch 4 removes the old core function that was
replaced by the new one, as there is no more user of it.  Patch 5
updates DAMON_STAT to use the new one instead of its in-house
nearly-duplicate self implementation of the functionality.  Finally
patches 6 and 7 update the DAMON_RECLAIM and DAMON_LRU_SORT user
documentation for the new behaviors, respectively.

SeongJae Park (7):
  mm/damon: introduce damon_set_region_system_rams_default()
  mm/damon/reclaim: cover all system rams
  mm/damon/lru_sort: cover all system rams
  mm/damon/core: remove damon_set_region_biggest_system_ram_default()
  mm/damon/stat: use damon_set_region_system_rams_default()
  Docs/admin-guide/mm/damon/reclaim: update for entire memory monitoring
  Docs/admin-guide/mm/damon/lru_sort: update for entire memory
    monitoring

 .../admin-guide/mm/damon/lru_sort.rst         |  6 ++-
 .../admin-guide/mm/damon/reclaim.rst          |  6 ++-
 include/linux/damon.h                         |  2 +-
 mm/damon/core.c                               | 49 +++++++++--------
 mm/damon/lru_sort.c                           |  8 +--
 mm/damon/reclaim.c                            | 14 ++---
 mm/damon/stat.c                               | 53 ++-----------------
 7 files changed, 50 insertions(+), 88 deletions(-)


base-commit: 11bcd10460e9446785fc04deb5d175806a00400b
-- 
2.47.3

[RFC PATCH 6/7] Docs/admin-guide/mm/damon/reclaim: update for entire memory monitoring

[SeongJae Park]

Update DAMON_RECLAIM usage document for the changed default monitoring
target region selection.

Signed-off-by: SeongJae Park <sj@kernel.org>
---
 Documentation/admin-guide/mm/damon/reclaim.rst | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/admin-guide/mm/damon/reclaim.rst b/Documentation/admin-guide/mm/damon/reclaim.rst
index b14a065586271..ec7e3e32b4ac6 100644
--- a/Documentation/admin-guide/mm/damon/reclaim.rst
+++ b/Documentation/admin-guide/mm/damon/reclaim.rst
@@ -240,7 +240,8 @@ Start of target memory region in physical address.
 
 The start physical address of memory region that DAMON_RECLAIM will do work
 against.  That is, DAMON_RECLAIM will find cold memory regions in this region
-and reclaims.  By default, biggest System RAM is used as the region.
+and reclaims.  By default, the system's entire physical memory is used as the
+region.
 
 monitor_region_end
 ------------------
@@ -249,7 +250,8 @@ End of target memory region in physical address.
 
 The end physical address of memory region that DAMON_RECLAIM will do work
 against.  That is, DAMON_RECLAIM will find cold memory regions in this region
-and reclaims.  By default, biggest System RAM is used as the region.
+and reclaims.  By default, the system's entire physical memory is used as the
+region.
 
 addr_unit
 ---------
-- 
2.47.3

[RFC PATCH 7/7] Docs/admin-guide/mm/damon/lru_sort: update for entire memory monitoring

[SeongJae Park]

Update DAMON_LRU_SORT usage document for the changed default monitoring
target region selection.

Signed-off-by: SeongJae Park <sj@kernel.org>
---
 Documentation/admin-guide/mm/damon/lru_sort.rst | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/admin-guide/mm/damon/lru_sort.rst b/Documentation/admin-guide/mm/damon/lru_sort.rst
index 25e2f042a383f..796b0a028555d 100644
--- a/Documentation/admin-guide/mm/damon/lru_sort.rst
+++ b/Documentation/admin-guide/mm/damon/lru_sort.rst
@@ -246,7 +246,8 @@ monitor_region_start
 Start of target memory region in physical address.
 
 The start physical address of memory region that DAMON_LRU_SORT will do work
-against.  By default, biggest System RAM is used as the region.
+against.  By default, the system's entire phyiscal memory is used as the
+region.
 
 monitor_region_end
 ------------------
@@ -254,7 +255,8 @@ monitor_region_end
 End of target memory region in physical address.
 
 The end physical address of memory region that DAMON_LRU_SORT will do work
-against.  By default, biggest System RAM is used as the region.
+against.  By default, the system's entire physical memory is used as the
+region.
 
 addr_unit
 ---------
-- 
2.47.3