[PATCH] docs: fix typos in design.rst

[PATCH] docs: fix typos in design.rst

[Cheesecake]

L140: "unsinged" -> "unsigned"
L371: "sampleing" -> "sampling"
L387: "multipled" -> "multiplied"

Signed-off-by: Cheesecake <cheesecake2960@icloud.com>
---
 Documentation/mm/damon/design.rst | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/mm/damon/design.rst b/Documentation/mm/damon/design.rst
index afc7d52bd..9cc70a296 100644
--- a/Documentation/mm/damon/design.rst
+++ b/Documentation/mm/damon/design.rst
@@ -140,7 +140,7 @@ as Idle page tracking does.
 Address Unit
 ------------
 
-DAMON core layer uses ``unsinged long`` type for monitoring target address
+DAMON core layer uses ``unsigned long`` type for monitoring target address
 ranges.  In some cases, the address space for a given operations set could be
 too large to be handled with the type.  ARM (32-bit) with large physical
 address extension is an example.  For such cases, a per-operations set
@@ -371,7 +371,7 @@ with theoretical maximum ``nr_accesses``, which can be calculated as
 ``aggregation interval / sampling interval``.
 
 The mechanism calculates the ratio of access events for ``aggrs`` aggregations,
-and increases or decrease the ``sampleing interval`` and ``aggregation
+and increases or decrease the ``sampling interval`` and ``aggregation
 interval`` in same ratio, if the observed access ratio is lower or higher than
 the target, respectively.  The ratio of the intervals change is decided in
 proportion to the distance between current samples ratio and the target ratio.
@@ -387,7 +387,7 @@ The tuning is turned off by default, and need to be set explicitly by the user.
 As a rule of thumbs and the Parreto principle, 4% access samples ratio target
 is recommended.  Note that Parreto principle (80/20 rule) has applied twice.
 That is, assumes 4% (20% of 20%) DAMON-observed access events ratio (source)
-to capture 64% (80% multipled by 80%) real access events (outcomes).
+to capture 64% (80% multiplied by 80%) real access events (outcomes).
 
 To know how user-space can use this feature via :ref:`DAMON sysfs interface
 <sysfs_interface>`, refer to :ref:`intervals_goal
-- 
2.54.0

Re: [PATCH] docs: fix typos in design.rst

[SeongJae Park]

Hello Cheesecake,

Thank you for this patch!

For the consistency, let's use 'Docs/mm/damon/design:' as the prefix of the
subject.  E.g., Docs/mm/damon/design: fix three typos

On Sat, 16 May 2026 18:35:37 +0900 Cheesecake <cheesecake2960@icloud.com> wrote:

> L140: "unsinged" -> "unsigned"
> L371: "sampleing" -> "sampling"
> L387: "multipled" -> "multiplied"

Thank you for finding and fixing these!

> 
> Signed-off-by: Cheesecake <cheesecake2960@icloud.com>

Is Cheesecake your real name or known identity?  We don't allow anonymous
contributions [1], and mm community prefer to use real names.

[...]

The file changes look good.

Could you please send v2 of this patch with changed subject and the name (if
Cheesecake is not your real name or known identity)?

[1] https://docs.kernel.org/process/submitting-patches.html#developer-s-certificate-of-origin-1-1


Thanks,
SJ

Re: [PATCH] docs: fix typos in design.rst

[Cheesecake]

On 2026/05/17 2:08, SeongJae Park wrote:
> Hello Cheesecake,
>
> Thank you for this patch!
>
> For the consistency, let's use 'Docs/mm/damon/design:' as the prefix of the
> subject.  E.g., Docs/mm/damon/design: fix three typos
>
> On Sat, 16 May 2026 18:35:37 +0900 Cheesecake <cheesecake2960@icloud.com> wrote:
>
>> L140: "unsinged" -> "unsigned"
>> L371: "sampleing" -> "sampling"
>> L387: "multipled" -> "multiplied"
> Thank you for finding and fixing these!
>
>> Signed-off-by: Cheesecake <cheesecake2960@icloud.com>
> Is Cheesecake your real name or known identity?  We don't allow anonymous
> contributions [1], and mm community prefer to use real names.
>
> [...]
>
> The file changes look good.
>
> Could you please send v2 of this patch with changed subject and the name (if
> Cheesecake is not your real name or known identity)?
>
> [1] https://docs.kernel.org/process/submitting-patches.html#developer-s-certificate-of-origin-1-1
>
>
> Thanks,
> SJ

Thanks for pointing that out.

I accidentally sent this patch using an anonymous address/name.
I'll resend it properly later.

Thank you for your time.

[PATCH v2] docs: fix typos in design.rst

[Sakurai Shun]

L140: "unsinged" -> "unsigned"
L371: "sampleing" -> "sampling"
L387: "multipled" -> "multiplied"

Signed-off-by: Sakurai Shun <ssh1326@icloud.com>
---
 Documentation/mm/damon/design.rst | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/mm/damon/design.rst b/Documentation/mm/damon/design.rst
index afc7d52bd..9cc70a296 100644
--- a/Documentation/mm/damon/design.rst
+++ b/Documentation/mm/damon/design.rst
@@ -140,7 +140,7 @@ as Idle page tracking does.
 Address Unit
 ------------
 
-DAMON core layer uses ``unsinged long`` type for monitoring target address
+DAMON core layer uses ``unsigned long`` type for monitoring target address
 ranges.  In some cases, the address space for a given operations set could be
 too large to be handled with the type.  ARM (32-bit) with large physical
 address extension is an example.  For such cases, a per-operations set
@@ -371,7 +371,7 @@ with theoretical maximum ``nr_accesses``, which can be calculated as
 ``aggregation interval / sampling interval``.
 
 The mechanism calculates the ratio of access events for ``aggrs`` aggregations,
-and increases or decrease the ``sampleing interval`` and ``aggregation
+and increases or decrease the ``sampling interval`` and ``aggregation
 interval`` in same ratio, if the observed access ratio is lower or higher than
 the target, respectively.  The ratio of the intervals change is decided in
 proportion to the distance between current samples ratio and the target ratio.
@@ -387,7 +387,7 @@ The tuning is turned off by default, and need to be set explicitly by the user.
 As a rule of thumbs and the Parreto principle, 4% access samples ratio target
 is recommended.  Note that Parreto principle (80/20 rule) has applied twice.
 That is, assumes 4% (20% of 20%) DAMON-observed access events ratio (source)
-to capture 64% (80% multipled by 80%) real access events (outcomes).
+to capture 64% (80% multiplied by 80%) real access events (outcomes).
 
 To know how user-space can use this feature via :ref:`DAMON sysfs interface
 <sysfs_interface>`, refer to :ref:`intervals_goal
-- 
2.54.0