[PATCH 1/2] dt-bindings: hwmon: pmbus: Add Analog Devices MAX16545/MAX16550 and Volterra VT7505

["Pradhan, Sanman" <sanman.pradhan@hpe.com>]

From: Sanman Pradhan <psanman@juniper.net>

Add device tree binding documentation for the Analog Devices MAX16545 and
MAX16550, and the Volterra VT7505 PMBus controllers.

Signed-off-by: Sanman Pradhan <psanman@juniper.net>
---
 .../bindings/hwmon/pmbus/adi,vt7505.yaml      | 83 +++++++++++++++++++
 1 file changed, 83 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/pmbus/adi,vt7505.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/adi,vt7505.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/adi,vt7505.yaml
new file mode 100644
index 000000000000..286c88eb7be8
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/adi,vt7505.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pmbus/adi,vt7505.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX16545/MAX16550 and Volterra VT7505 PMBus controllers
+
+maintainers:
+  - Sanman Pradhan <psanman@juniper.net>
+
+description: |
+  The Analog Devices MAX16545 and MAX16550, and the Volterra VT7505, are PMBus
+  controllers that provide input/output voltage, input/output current,
+  input power and temperature monitoring over the PMBus interface.
+
+  The MAX16545 uses the same programming model as the VT7505.
+
+  Datasheets:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/max16545b-max16545c.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/max16550.pdf
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - adi,max16550
+          - adi,vt7505
+      - items:
+          - const: adi,max16545
+          - const: adi,vt7505
+
+  reg:
+    maxItems: 1
+
+  adi,rload-ohms:
+    description:
+      Resistance in ohms of the external current-report resistor connected
+      between the ILOAD pin and ground. It is used to scale the reported
+      input and output current and power.
+    minimum: 1
+    default: 4750
+
+  adi,ocp-severe-filter:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Deglitch time applied to the severe overcurrent-protection comparator,
+      programmed into the MFR_CONFIG[15:14] field. The MAX16550 and VT7505
+      expose this field; it decodes as 0 = 0 us, 1 = 1 us, 2 = 2 us and
+      3 = 10 us. On the MAX16545 the severe overcurrent delay is fixed and
+      these bits are reserved.
+    enum: [0, 1, 2, 3]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+allOf:
+  # The severe OCP deglitch filter is fixed on the MAX16545, so the property
+  # is only valid for the MAX16550 and VT7505.
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,max16545
+    then:
+      properties:
+        adi,ocp-severe-filter: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@40 {
+            compatible = "adi,vt7505";
+            reg = <0x40>;
+            adi,rload-ohms = <4750>;
+        };
+    };
-- 
2.34.1