* [PATCH v2 1/1] hwmon: Add Minisforum UM780 XTX EC monitoring and fan control
2026-08-18 18:13 [PATCH v2 0/1] hwmon: Add Minisforum UM780 XTX EC monitoring and fan control Sebastián Peyrott
@ 2026-08-18 18:13 ` Sebastián Peyrott
0 siblings, 0 replies; 2+ messages in thread
From: Sebastián Peyrott @ 2026-08-18 18:13 UTC (permalink / raw)
To: Guenter Roeck
Cc: linux-hwmon, Jonathan Corbet, Shuah Khan, linux-doc, linux-kernel
Add a DMI-gated hwmon driver for the embedded controller used by the
Minisforum UM780 XTX with board revision 1.1 and BIOS 1.06.
Expose the CPU and system fan control temperatures and tachometers. The
tachometer protocol returns one byte per OEM command, so serialize
transactions and use high-low-high sampling to reject torn values.
Allow selecting either complete OEM CPU fan profile through pwm1_enable and
changing the two validated system fan transition temperatures through
standard automatic-curve attributes. Cache coherent settings and restore
them after the firmware reloads defaults following resume.
Signed-off-by: Sebastián Peyrott <speyrott@gmail.com>
---
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/minisforum-um780xtx.rst | 68 +++
MAINTAINERS | 7 +
drivers/hwmon/Kconfig | 16 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/minisforum-um780xtx.c | 509 ++++++++++++++++++++
6 files changed, 602 insertions(+)
create mode 100644 Documentation/hwmon/minisforum-um780xtx.rst
create mode 100644 drivers/hwmon/minisforum-um780xtx.c
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index d979e6d6e9f2..c98cad395455 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -186,6 +186,7 @@ Hardware Monitoring Kernel Drivers
mcp3021
mcp9982
menf21bmc
+ minisforum-um780xtx
mlxreg-fan
mp2856
mp2869
diff --git a/Documentation/hwmon/minisforum-um780xtx.rst b/Documentation/hwmon/minisforum-um780xtx.rst
new file mode 100644
index 000000000000..ff8d1b2322e1
--- /dev/null
+++ b/Documentation/hwmon/minisforum-um780xtx.rst
@@ -0,0 +1,68 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+====================================
+Kernel driver minisforum-um780xtx
+====================================
+
+Supported systems:
+
+ * Minisforum UM780 XTX
+
+ * DMI product name: ``Venus series``
+ * Mainboard: ``F7BSD``, revision ``1.1``
+ * BIOS version: ``1.06``
+
+Author: Sebastián Peyrott <speyrott@gmail.com>
+
+Description
+-----------
+
+This driver exposes hardware monitoring and fan-control data cached by the
+IT5571E embedded controller. It uses the ACPI EC transport and only binds to
+the exact system and firmware identity listed above.
+
+The two temperature channels are the values used by the EC's fan-control
+loops. Their physical sensor placement is not known. The CPU channel is the
+filtered AMD SB-TSI temperature, while the system channel is an external
+thermistor input.
+
+The fan tachometers are read through OEM EC commands. Since each byte is
+returned by a separate command, the driver uses a high-low-high sequence and
+retries if the high byte changes.
+
+Sysfs entries
+-------------
+
+========================== ==============================================
+``temp1_input`` CPU-fan control temperature
+``temp2_input`` System-fan control temperature
+``fan1_input`` CPU fan speed in RPM
+``fan2_input`` System fan speed in RPM
+``pwm1_enable`` CPU profile: 2 is OEM B1, 3 is OEM B2
+``pwm2_auto_point1_temp`` Off-to-low system-fan transition temperature
+``pwm2_auto_point2_temp`` Low-to-high system-fan transition temperature
+========================== ==============================================
+
+CPU fan profiles
+----------------
+
+Values 2 and 3 of ``pwm1_enable`` select the two complete automatic profiles
+implemented by the firmware. Writing either value reloads the whole CPU fan
+curve, including firmware state which is not visible through the ACPI EC
+window. Other values are rejected.
+
+System fan thresholds
+---------------------
+
+The two writable system-fan temperatures are rounded to whole degrees Celsius
+and clamped to preserve strict ordering between both visible thresholds and
+the firmware's internal third threshold. The third threshold does not select
+a new PWM target and is therefore not exposed as another auto point.
+
+Resume state preservation
+-------------------------
+
+Fan settings are held in EC RAM. On the supported firmware, initialization
+during s2idle resume reloads the factory system-fan curve. The driver saves the
+coherent CPU profile and system-fan thresholds at suspend and restores them
+synchronously at resume.
diff --git a/MAINTAINERS b/MAINTAINERS
index 6156e48e1816..f60ea9c6cfe7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18012,6 +18012,13 @@ F: include/linux/min_heap.h
F: lib/min_heap.c
F: lib/tests/min_heap_kunit.c
+MINISFORUM UM780 XTX EC HARDWARE MONITOR DRIVER
+M: Sebastián Peyrott <speyrott@gmail.com>
+L: linux-hwmon@vger.kernel.org
+S: Maintained
+F: Documentation/hwmon/minisforum-um780xtx.rst
+F: drivers/hwmon/minisforum-um780xtx.c
+
MIPI CCS, SMIA AND SMIA++ IMAGE SENSOR DRIVER
M: Sakari Ailus <sakari.ailus@linux.intel.com>
L: linux-media@vger.kernel.org
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 81a9a1d40eec..45ac04c89b23 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1490,6 +1490,22 @@ config SENSORS_MENF21BMC_HWMON
This driver can also be built as a module. If so the module
will be called menf21bmc_hwmon.
+config SENSORS_MINISFORUM_UM780XTX
+ tristate "Minisforum UM780 XTX EC hardware monitoring"
+ depends on ACPI && DMI && X86
+ help
+ If you say yes here you get support for the hardware monitoring
+ features of the embedded controller in the Minisforum UM780 XTX.
+ This includes CPU and system fan speeds, their control temperatures,
+ two CPU fan profiles, system fan temperature thresholds, and
+ preservation of the selected settings across suspend and resume.
+
+ This driver only binds to explicitly supported board and firmware
+ versions.
+
+ This driver can also be built as a module. If so, the module
+ will be called minisforum-um780xtx.
+
config SENSORS_MR75203
tristate "Moortec Semiconductor MR75203 PVT Controller"
select REGMAP_MMIO
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 0cad7e21634c..a690f5f97ffc 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -180,6 +180,7 @@ obj-$(CONFIG_SENSORS_TC654) += tc654.o
obj-$(CONFIG_SENSORS_TPS23861) += tps23861.o
obj-$(CONFIG_SENSORS_MLXREG_FAN) += mlxreg-fan.o
obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o
+obj-$(CONFIG_SENSORS_MINISFORUM_UM780XTX) += minisforum-um780xtx.o
obj-$(CONFIG_SENSORS_MR75203) += mr75203.o
obj-$(CONFIG_SENSORS_NCT6683) += nct6683.o
obj-$(CONFIG_SENSORS_NCT6694) += nct6694-hwmon.o
diff --git a/drivers/hwmon/minisforum-um780xtx.c b/drivers/hwmon/minisforum-um780xtx.c
new file mode 100644
index 000000000000..102ce067d164
--- /dev/null
+++ b/drivers/hwmon/minisforum-um780xtx.c
@@ -0,0 +1,509 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Minisforum UM780 XTX (F7BSD) embedded-controller hwmon driver.
+ *
+ * Copyright (C) 2026 Sebastián Peyrott <speyrott@gmail.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/cleanup.h>
+#include <linux/dmi.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#define UM780XTX_EC_TEMP_SYS 0x05
+#define UM780XTX_EC_TEMP_CPU 0x09
+#define UM780XTX_EC_CPU_PROFILE 0x2f
+#define UM780XTX_EC_SYS_POINT1 0x31
+#define UM780XTX_EC_SYS_POINT2 0x34
+#define UM780XTX_EC_SYS_POINT3 0x37
+
+#define UM780XTX_EC_PROFILE_B1 0xb1
+#define UM780XTX_EC_PROFILE_B2 0xb2
+
+#define UM780XTX_EC_FAN1_LO 0xb6
+#define UM780XTX_EC_FAN1_HI 0xb7
+#define UM780XTX_EC_FAN2_LO 0xb9
+#define UM780XTX_EC_FAN2_HI 0xba
+
+#define UM780XTX_EC_MAX_RPM 9000
+#define UM780XTX_EC_RPM_RETRIES 3
+
+static struct platform_device *um780xtx_pdev;
+
+struct um780xtx_data {
+ struct device *hwmon_dev;
+ u8 cached_profile;
+ u8 cached_sys_point1;
+ u8 cached_sys_point2;
+ u8 sys_point3;
+};
+
+static const struct dmi_system_id um780xtx_dmi_table[] = {
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR,
+ "Micro Computer (HK) Tech Limited"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Venus series"),
+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR,
+ "Shenzhen Meigao Electronic Equipment Co.,Ltd"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "F7BSD"),
+ },
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(dmi, um780xtx_dmi_table);
+
+static bool um780xtx_firmware_match(void)
+{
+ const char *board_version = dmi_get_system_info(DMI_BOARD_VERSION);
+ const char *bios_version = dmi_get_system_info(DMI_BIOS_VERSION);
+
+ return board_version && bios_version &&
+ !strcmp(board_version, "1.1") && !strcmp(bios_version, "1.06");
+}
+
+static int um780xtx_oem_read(u8 command, u8 *value)
+{
+ return ec_transaction(command, NULL, 0, value, 1);
+}
+
+static int um780xtx_read_rpm(u8 command_hi, u8 command_lo, long *rpm)
+{
+ u8 hi_before;
+ u8 hi_after;
+ u8 lo;
+ unsigned int value;
+ int attempt;
+ int ret;
+
+ for (attempt = 0; attempt < UM780XTX_EC_RPM_RETRIES; attempt++) {
+ ret = um780xtx_oem_read(command_hi, &hi_before);
+ if (ret)
+ return ret;
+ ret = um780xtx_oem_read(command_lo, &lo);
+ if (ret)
+ return ret;
+ ret = um780xtx_oem_read(command_hi, &hi_after);
+ if (ret)
+ return ret;
+ if (hi_before != hi_after)
+ continue;
+
+ value = (hi_after << 8) | lo;
+ if (value > UM780XTX_EC_MAX_RPM)
+ continue;
+
+ *rpm = value;
+ return 0;
+ }
+
+ return -EAGAIN;
+}
+
+static int um780xtx_read_profile(long *mode)
+{
+ u8 profile;
+ int ret;
+
+ ret = ec_read(UM780XTX_EC_CPU_PROFILE, &profile);
+ if (ret)
+ return ret;
+ if (profile == UM780XTX_EC_PROFILE_B1) {
+ *mode = 2;
+ return 0;
+ }
+ if (profile == UM780XTX_EC_PROFILE_B2) {
+ *mode = 3;
+ return 0;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int um780xtx_write_profile(struct um780xtx_data *data, long mode)
+{
+ u8 expected;
+ u8 profile;
+ int ret;
+
+ if (mode != 2 && mode != 3)
+ return -EINVAL;
+ expected = mode == 2 ? UM780XTX_EC_PROFILE_B1 : UM780XTX_EC_PROFILE_B2;
+
+ ret = ec_transaction(expected, NULL, 0, NULL, 0);
+ if (ret)
+ return ret;
+ ret = ec_read(UM780XTX_EC_CPU_PROFILE, &profile);
+ if (ret)
+ return ret;
+ if (profile != expected)
+ return -EIO;
+
+ data->cached_profile = profile;
+ return 0;
+}
+
+static const u8 um780xtx_sys_point_offsets[] = {
+ UM780XTX_EC_SYS_POINT1,
+ UM780XTX_EC_SYS_POINT2,
+};
+
+static ssize_t um780xtx_sys_point_temp_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+ u8 value;
+ int ret;
+
+ guard(hwmon_lock)(dev);
+ ret = ec_read(um780xtx_sys_point_offsets[sattr->index], &value);
+ if (ret)
+ return ret;
+
+ return sysfs_emit(buf, "%u\n", value * 1000);
+}
+
+static ssize_t um780xtx_sys_point_temp_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct um780xtx_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+ u8 points[2];
+ u8 readback;
+ long value;
+ int ret;
+
+ ret = kstrtol(buf, 10, &value);
+ if (ret)
+ return ret;
+
+ guard(hwmon_lock)(dev);
+ ret = ec_read(UM780XTX_EC_SYS_POINT1, &points[0]);
+ if (ret)
+ return ret;
+ ret = ec_read(UM780XTX_EC_SYS_POINT2, &points[1]);
+ if (ret)
+ return ret;
+ if (points[0] >= points[1] || points[1] >= data->sys_point3)
+ return -EIO;
+
+ value = DIV_ROUND_CLOSEST(value, 1000);
+ if (!sattr->index)
+ value = clamp_val(value, 0, points[1] - 1);
+ else
+ value = clamp_val(value, points[0] + 1,
+ data->sys_point3 - 1);
+ points[sattr->index] = value;
+
+ ret = ec_write(um780xtx_sys_point_offsets[sattr->index],
+ points[sattr->index]);
+ if (ret)
+ return ret;
+ ret = ec_read(um780xtx_sys_point_offsets[sattr->index], &readback);
+ if (ret)
+ return ret;
+ if (readback != points[sattr->index])
+ return -EIO;
+
+ data->cached_sys_point1 = points[0];
+ data->cached_sys_point2 = points[1];
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR_RW(pwm2_auto_point1_temp,
+ um780xtx_sys_point_temp, 0);
+static SENSOR_DEVICE_ATTR_RW(pwm2_auto_point2_temp,
+ um780xtx_sys_point_temp, 1);
+
+static struct attribute *um780xtx_extra_attrs[] = {
+ &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group um780xtx_extra_group = {
+ .attrs = um780xtx_extra_attrs,
+};
+
+static const struct attribute_group *um780xtx_extra_groups[] = {
+ &um780xtx_extra_group,
+ NULL
+};
+
+static umode_t um780xtx_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ if (type == hwmon_temp || type == hwmon_fan)
+ return 0444;
+ if (type == hwmon_pwm && attr == hwmon_pwm_enable)
+ return 0644;
+ return 0;
+}
+
+static int um780xtx_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *value)
+{
+ u8 raw;
+ int ret;
+
+ if (type == hwmon_temp) {
+ ret = ec_read(channel ? UM780XTX_EC_TEMP_SYS :
+ UM780XTX_EC_TEMP_CPU, &raw);
+ if (ret)
+ return ret;
+ *value = raw * 1000L;
+ return 0;
+ }
+ if (type == hwmon_fan) {
+ if (!channel)
+ ret = um780xtx_read_rpm(UM780XTX_EC_FAN1_HI,
+ UM780XTX_EC_FAN1_LO, value);
+ else
+ ret = um780xtx_read_rpm(UM780XTX_EC_FAN2_HI,
+ UM780XTX_EC_FAN2_LO, value);
+ return ret;
+ }
+ if (type == hwmon_pwm)
+ return um780xtx_read_profile(value);
+
+ return -EOPNOTSUPP;
+}
+
+static int um780xtx_write(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long value)
+{
+ struct um780xtx_data *data = dev_get_drvdata(dev);
+
+ if (type == hwmon_pwm && attr == hwmon_pwm_enable)
+ return um780xtx_write_profile(data, value);
+
+ return -EOPNOTSUPP;
+}
+
+static int um780xtx_read_string(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ static const char * const labels[] = { "CPU", "SYS" };
+
+ if (type == hwmon_temp && attr == hwmon_temp_label)
+ *str = labels[channel];
+ else if (type == hwmon_fan && attr == hwmon_fan_label)
+ *str = labels[channel];
+ else
+ return -EOPNOTSUPP;
+ return 0;
+}
+
+static const struct hwmon_ops um780xtx_hwmon_ops = {
+ .is_visible = um780xtx_is_visible,
+ .read = um780xtx_read,
+ .write = um780xtx_write,
+ .read_string = um780xtx_read_string,
+};
+
+static const struct hwmon_channel_info * const um780xtx_info[] = {
+ HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL),
+ HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_LABEL,
+ HWMON_F_INPUT | HWMON_F_LABEL),
+ HWMON_CHANNEL_INFO(pwm, HWMON_PWM_ENABLE),
+ NULL
+};
+
+static const struct hwmon_chip_info um780xtx_chip_info = {
+ .ops = &um780xtx_hwmon_ops,
+ .info = um780xtx_info,
+};
+
+static int um780xtx_write_sys_point(u8 offset, u8 value)
+{
+ u8 readback;
+ int ret;
+
+ ret = ec_write(offset, value);
+ if (ret)
+ return ret;
+ ret = ec_read(offset, &readback);
+ if (ret)
+ return ret;
+
+ return readback == value ? 0 : -EIO;
+}
+
+static int um780xtx_restore_sys_points(struct um780xtx_data *data,
+ u8 current_point2)
+{
+ u8 point1 = data->cached_sys_point1;
+ u8 point2 = data->cached_sys_point2;
+ int ret;
+
+ /* Keep strict ordering valid after each individual EC write. */
+ if (point1 >= current_point2) {
+ ret = um780xtx_write_sys_point(UM780XTX_EC_SYS_POINT2, point2);
+ if (ret)
+ return ret;
+ return um780xtx_write_sys_point(UM780XTX_EC_SYS_POINT1,
+ point1);
+ }
+
+ ret = um780xtx_write_sys_point(UM780XTX_EC_SYS_POINT1, point1);
+ if (ret)
+ return ret;
+ return um780xtx_write_sys_point(UM780XTX_EC_SYS_POINT2, point2);
+}
+
+static int um780xtx_cache_state(struct um780xtx_data *data)
+{
+ u8 profile;
+ u8 point1;
+ u8 point2;
+ int ret;
+
+ ret = ec_read(UM780XTX_EC_CPU_PROFILE, &profile);
+ if (ret)
+ return ret;
+ if (profile != UM780XTX_EC_PROFILE_B1 &&
+ profile != UM780XTX_EC_PROFILE_B2)
+ return -EINVAL;
+
+ ret = ec_read(UM780XTX_EC_SYS_POINT1, &point1);
+ if (ret)
+ return ret;
+ ret = ec_read(UM780XTX_EC_SYS_POINT2, &point2);
+ if (ret)
+ return ret;
+ if (point1 >= point2 || point2 >= data->sys_point3)
+ return -EINVAL;
+
+ data->cached_profile = profile;
+ data->cached_sys_point1 = point1;
+ data->cached_sys_point2 = point2;
+ return 0;
+}
+
+static int um780xtx_restore_state(struct um780xtx_data *data)
+{
+ u8 readback;
+ u8 point2;
+ int ret;
+
+ ret = ec_transaction(data->cached_profile, NULL, 0, NULL, 0);
+ if (ret)
+ return ret;
+ ret = ec_read(UM780XTX_EC_CPU_PROFILE, &readback);
+ if (ret)
+ return ret;
+ if (readback != data->cached_profile)
+ return -EIO;
+
+ ret = ec_read(UM780XTX_EC_SYS_POINT2, &point2);
+ if (ret)
+ return ret;
+
+ return um780xtx_restore_sys_points(data, point2);
+}
+
+static int um780xtx_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct um780xtx_data *data;
+ struct device *hwmon;
+ int ret;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, data);
+
+ ret = ec_read(UM780XTX_EC_SYS_POINT3, &data->sys_point3);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "failed to read system fan limit\n");
+ ret = um780xtx_cache_state(data);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "failed to read initial fan settings\n");
+
+ hwmon = devm_hwmon_device_register_with_info(dev, "um780xtx_ec", data,
+ &um780xtx_chip_info,
+ um780xtx_extra_groups);
+ if (IS_ERR(hwmon))
+ return PTR_ERR(hwmon);
+ data->hwmon_dev = hwmon;
+
+ return 0;
+}
+
+static int um780xtx_suspend(struct device *dev)
+{
+ struct um780xtx_data *data = dev_get_drvdata(dev);
+
+ guard(hwmon_lock)(data->hwmon_dev);
+ return um780xtx_cache_state(data);
+}
+
+static int um780xtx_resume(struct device *dev)
+{
+ struct um780xtx_data *data = dev_get_drvdata(dev);
+
+ guard(hwmon_lock)(data->hwmon_dev);
+ return um780xtx_restore_state(data);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(um780xtx_pm_ops, um780xtx_suspend,
+ um780xtx_resume);
+
+static struct platform_driver um780xtx_driver = {
+ .driver = {
+ .name = "um780xtx-ec-hwmon",
+ .pm = pm_sleep_ptr(&um780xtx_pm_ops),
+ },
+ .probe = um780xtx_probe,
+};
+
+static int __init um780xtx_init(void)
+{
+ int ret;
+
+ if (!dmi_check_system(um780xtx_dmi_table) ||
+ !um780xtx_firmware_match() || !ec_get_handle())
+ return -ENODEV;
+ ret = platform_driver_register(&um780xtx_driver);
+ if (ret)
+ return ret;
+
+ um780xtx_pdev = platform_device_register_simple("um780xtx-ec-hwmon",
+ PLATFORM_DEVID_NONE,
+ NULL, 0);
+ if (IS_ERR(um780xtx_pdev)) {
+ ret = PTR_ERR(um780xtx_pdev);
+ platform_driver_unregister(&um780xtx_driver);
+ return ret;
+ }
+ return 0;
+}
+
+static void __exit um780xtx_exit(void)
+{
+ platform_device_unregister(um780xtx_pdev);
+ platform_driver_unregister(&um780xtx_driver);
+}
+
+module_init(um780xtx_init);
+module_exit(um780xtx_exit);
+
+MODULE_AUTHOR("Sebastián Peyrott <speyrott@gmail.com>");
+MODULE_DESCRIPTION("Minisforum UM780 XTX EC hwmon driver");
+MODULE_LICENSE("GPL");
--
2.54.0
^ permalink raw reply related [flat|nested] 2+ messages in thread