From: Janani Sunil <janani.sunil@analog.com>
To: "Nuno Sá" <nuno.sa@analog.com>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Olivier Moysan" <olivier.moysan@foss.st.com>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
"Linus Walleij" <linusw@kernel.org>,
"Bartosz Golaszewski" <brgl@kernel.org>,
"Jonathan Corbet" <corbet@lwn.net>,
"Shuah Khan" <skhan@linuxfoundation.org>,
"Michael Walle" <mwalle@kernel.org>
Cc: linux@analog.com, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-doc@vger.kernel.org,
jananisunil.dev@gmail.com,
"Uwe Kleine-König" <u.kleine-koenig@baylibre.com>,
"Janani Sunil" <janani.sunil@analog.com>
Subject: [PATCH v4 10/14] iio: adc: ad7768: Register GPIO auxiliary device
Date: Fri, 21 Aug 2026 16:07:03 +0200 [thread overview]
Message-ID: <20260821-ad7768-driver-v4-10-bb8fbd06d4eb@analog.com> (raw)
In-Reply-To: <20260821-ad7768-driver-v4-0-bb8fbd06d4eb@analog.com>
Register an auxiliary device when the AD7768 is described as a GPIO
controller. This allows the GPIO driver to share the parent regmap and
runtime power-management state.
Signed-off-by: Janani Sunil <janani.sunil@analog.com>
---
drivers/iio/adc/Kconfig | 1 +
drivers/iio/adc/ad7768.c | 32 ++++++++++++++++++++++++++++++++
2 files changed, 33 insertions(+)
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index a16f36f9502c..68334793c9ba 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -433,6 +433,7 @@ config AD7768
tristate "Analog Devices AD7768/AD7768-4 ADC driver"
depends on SPI
select REGULATOR
+ select AUXILIARY_BUS
select IIO_BUFFER
select IIO_BACKEND
select REGMAP
diff --git a/drivers/iio/adc/ad7768.c b/drivers/iio/adc/ad7768.c
index 97f84a6da63e..3f9306d54952 100644
--- a/drivers/iio/adc/ad7768.c
+++ b/drivers/iio/adc/ad7768.c
@@ -6,6 +6,7 @@
*/
#include <linux/array_size.h>
+#include <linux/auxiliary_bus.h>
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/cleanup.h>
@@ -121,6 +122,7 @@
#define AD7768_MAX_MCLK_FREQ_HZ (34 * HZ_PER_MHZ)
#define MAX_FREQ_PER_MODE 6
#define AD7768_MAX_CHANNEL 8
+#define AD7768_NUM_GPIOS 5
#define AD7768_NUM_CHANNEL_MODES 2
#define AD7768_CALIB_REG_MSK GENMASK(23, 0)
#define AD7768_WIDEBAND_SETTLING_SAMPLES 68
@@ -191,6 +193,7 @@ struct ad7768_state {
struct mutex lock;
struct clk *mclk;
unsigned int datalines;
+ unsigned long gpio_valid_mask;
enum ad7768_clock_source clock_source;
unsigned int power_mode_idx;
const struct ad7768_chip_info *chip_info;
@@ -1262,6 +1265,31 @@ static void ad7768_set_available_sampl_freq(struct ad7768_state *st)
}
}
+static int ad7768_gpio_adev_init(struct ad7768_state *st)
+{
+ struct device *dev = regmap_get_device(st->regmap);
+ struct spi_device *spi = to_spi_device(dev);
+ struct auxiliary_device *adev;
+ int id;
+
+ if (!device_property_read_bool(dev, "gpio-controller"))
+ return 0;
+
+ st->gpio_valid_mask = GENMASK(AD7768_NUM_GPIOS - 1, 0);
+ if (st->clock_source != AD7768_CLOCK_SOURCE_MCLK)
+ st->gpio_valid_mask &= ~BIT(4);
+
+ /* Use the SPI bus number and chip select to derive a stable per-device ID. */
+ id = (spi->controller->bus_num << 8) | spi_get_chipselect(spi, 0);
+ adev = __devm_auxiliary_device_create(dev, KBUILD_MODNAME, "gpio",
+ &st->gpio_valid_mask, id);
+ if (!adev)
+ return dev_err_probe(dev, -ENODEV,
+ "Failed to create GPIO auxiliary device\n");
+
+ return 0;
+}
+
static int ad7768_set_filter_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
unsigned int mode)
@@ -1754,6 +1782,10 @@ static int ad7768_probe(struct spi_device *spi)
indio_dev->setup_ops = &ad7768_buffer_ops;
+ ret = ad7768_gpio_adev_init(st);
+ if (ret)
+ return ret;
+
ret = devm_iio_device_register(dev, indio_dev);
if (ret)
return ret;
--
2.43.0
next prev parent reply other threads:[~2026-08-21 14:08 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-21 14:06 [PATCH v4 00/14] iio: adc: Add AD7768/AD7768-4 ADC driver support Janani Sunil
2026-08-21 14:06 ` [PATCH v4 01/14] iio: adc: adi-axi-adc: Initialize state mutex Janani Sunil
2026-08-23 18:52 ` Jonathan Cameron
2026-08-23 19:05 ` Jonathan Cameron
2026-08-21 14:06 ` [PATCH v4 02/14] dt-bindings: iio: adc: Add AD7768 Janani Sunil
2026-08-21 15:57 ` David Lechner
2026-08-23 1:45 ` Jonathan Cameron
2026-08-21 14:06 ` [PATCH v4 03/14] iio: backend: Add support for CRC Janani Sunil
2026-08-21 16:02 ` David Lechner
2026-08-21 14:06 ` [PATCH v4 04/14] iio: adc: adi-axi-adc: " Janani Sunil
2026-08-21 16:03 ` David Lechner
2026-08-21 14:06 ` [PATCH v4 05/14] iio: adc: Add AD7768 and AD7768-4 core support Janani Sunil
2026-08-22 17:30 ` David Lechner
2026-08-23 8:35 ` Andy Shevchenko
2026-08-25 10:43 ` Janani Sunil
2026-08-23 19:16 ` Jonathan Cameron
2026-08-21 14:06 ` [PATCH v4 06/14] iio: adc: ad7768: Add configurable sampling modes Janani Sunil
2026-08-23 19:25 ` Jonathan Cameron
2026-08-24 6:43 ` Andy Shevchenko
2026-08-21 14:07 ` [PATCH v4 07/14] iio: adc: ad7768: Add calibration controls Janani Sunil
2026-08-24 6:50 ` Andy Shevchenko
2026-08-21 14:07 ` [PATCH v4 08/14] iio: adc: ad7768: Add per-channel conversion delay Janani Sunil
2026-08-24 7:10 ` Andy Shevchenko
2026-08-25 13:17 ` Janani Sunil
2026-08-21 14:07 ` [PATCH v4 09/14] iio: adc: ad7768: Add VCM regulator support Janani Sunil
2026-08-24 7:13 ` Andy Shevchenko
2026-08-21 14:07 ` Janani Sunil [this message]
2026-08-21 14:07 ` [PATCH v4 11/14] gpio: regmap: Use regmap_test_bits() for single bit reads Janani Sunil
2026-08-24 7:47 ` Andy Shevchenko
2026-08-21 14:07 ` [PATCH v4 12/14] gpio: regmap: Add optional runtime PM support Janani Sunil
2026-08-24 8:05 ` Andy Shevchenko
2026-08-25 13:50 ` Janani Sunil
2026-08-21 14:07 ` [PATCH v4 13/14] gpio: ad7768: Add AD7768 GPIO auxiliary driver Janani Sunil
2026-08-23 19:39 ` Jonathan Cameron
2026-08-24 8:13 ` Andy Shevchenko
2026-08-24 8:10 ` Andy Shevchenko
2026-08-21 14:07 ` [PATCH v4 14/14] Documentation: iio: Add AD7768 Documentation Janani Sunil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260821-ad7768-driver-v4-10-bb8fbd06d4eb@analog.com \
--to=janani.sunil@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=andy@kernel.org \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jananisunil.dev@gmail.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@analog.com \
--cc=mwalle@kernel.org \
--cc=nuno.sa@analog.com \
--cc=olivier.moysan@foss.st.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
--cc=u.kleine-koenig@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox