[PATCH net-next 0/2] Add ICSSG firmware stats related to HSR

[PATCH net-next 0/2] Add ICSSG firmware stats related to HSR

[MD Danish Anwar]

This series has two pacthes,
Patch 1/2 Updates Stats counter to use ARRAY_SIZE instead of hardcoded length.
Patch 2/2 Adds new stats related to HSR / PRP maintained by ICSSG firmware.

MD Danish Anwar (2):
  net: ti: icssg: Derive stats array lengths from ARRAY_SIZE
  net: ti: icssg: Add HSR and LRE PA statistics

 .../device_drivers/ethernet/ti/icssg_prueth.rst | 10 ++++++++++
 drivers/net/ethernet/ti/icssg/icssg_common.c    |  7 +++++--
 drivers/net/ethernet/ti/icssg/icssg_prueth.h    |  3 +--
 drivers/net/ethernet/ti/icssg/icssg_stats.h     | 17 ++++++++++++++++-
 .../net/ethernet/ti/icssg/icssg_switch_map.h    | 10 ++++++++++
 5 files changed, 42 insertions(+), 5 deletions(-)


base-commit: 63751099502d10f0aa6bb35273e56c5800cc4e3a
-- 
2.34.1

[PATCH net-next 1/2] net: ti: icssg: Derive stats array lengths from ARRAY_SIZE

[MD Danish Anwar]

Replace the manually maintained ICSSG_NUM_MIIG_STATS and
ICSSG_NUM_PA_STATS constants with ARRAY_SIZE() expressions derived
directly from the corresponding stat descriptor arrays, so that adding
new entries to icssg_all_miig_stats[] or icssg_all_pa_stats[] no longer
requires a separate update to a numeric constant.

To make this self-contained, break the circular include dependency
between icssg_stats.h and icssg_prueth.h:

  - icssg_stats.h previously included icssg_prueth.h (transitively
    pulling in icssg_switch_map.h and ETH_GSTRING_LEN).  Replace that
    with direct includes of <linux/ethtool.h>, <linux/kernel.h> and
    "icssg_switch_map.h".

  - icssg_prueth.h now includes icssg_stats.h, giving it access to
    the ARRAY_SIZE-based ICSSG_NUM_MIIG_STATS and ICSSG_NUM_PA_STATS
    before they are used in the prueth_emac struct and ICSSG_NUM_STATS.

Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
 drivers/net/ethernet/ti/icssg/icssg_prueth.h | 3 +--
 drivers/net/ethernet/ti/icssg/icssg_stats.h  | 7 ++++++-
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
index df93d15c5b78..e2ccecb0a0dd 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
@@ -43,6 +43,7 @@
 
 #include "icssg_config.h"
 #include "icss_iep.h"
+#include "icssg_stats.h"
 #include "icssg_switch_map.h"
 
 #define PRUETH_MAX_MTU          (2000 - ETH_HLEN - ETH_FCS_LEN)
@@ -57,8 +58,6 @@
 
 #define ICSSG_MAX_RFLOWS	8	/* per slice */
 
-#define ICSSG_NUM_PA_STATS	32
-#define ICSSG_NUM_MIIG_STATS	60
 /* Number of ICSSG related stats */
 #define ICSSG_NUM_STATS (ICSSG_NUM_MIIG_STATS + ICSSG_NUM_PA_STATS)
 #define ICSSG_NUM_STANDARD_STATS 31
diff --git a/drivers/net/ethernet/ti/icssg/icssg_stats.h b/drivers/net/ethernet/ti/icssg/icssg_stats.h
index 5ec0b38e0c67..b854eb587c1e 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_stats.h
+++ b/drivers/net/ethernet/ti/icssg/icssg_stats.h
@@ -8,10 +8,15 @@
 #ifndef __NET_TI_ICSSG_STATS_H
 #define __NET_TI_ICSSG_STATS_H
 
-#include "icssg_prueth.h"
+#include <linux/ethtool.h>
+#include <linux/kernel.h>
+#include "icssg_switch_map.h"
 
 #define STATS_TIME_LIMIT_1G_MS    25000    /* 25 seconds @ 1G */
 
+#define ICSSG_NUM_MIIG_STATS	ARRAY_SIZE(icssg_all_miig_stats)
+#define ICSSG_NUM_PA_STATS	ARRAY_SIZE(icssg_all_pa_stats)
+
 struct miig_stats_regs {
 	/* Rx */
 	u32 rx_packets;
-- 
2.34.1

Re: [PATCH net-next 1/2] net: ti: icssg: Derive stats array lengths from ARRAY_SIZE

[David CARLIER]

Hi MD,

On Tue, 12 May 2026 at 07:06, MD Danish Anwar <danishanwar@ti.com> wrote:
>
> Replace the manually maintained ICSSG_NUM_MIIG_STATS and
> ICSSG_NUM_PA_STATS constants with ARRAY_SIZE() expressions derived
> directly from the corresponding stat descriptor arrays, so that adding
> new entries to icssg_all_miig_stats[] or icssg_all_pa_stats[] no longer
> requires a separate update to a numeric constant.
>
> To make this self-contained, break the circular include dependency
> between icssg_stats.h and icssg_prueth.h:
>
>   - icssg_stats.h previously included icssg_prueth.h (transitively
>     pulling in icssg_switch_map.h and ETH_GSTRING_LEN).  Replace that
>     with direct includes of <linux/ethtool.h>, <linux/kernel.h> and
>     "icssg_switch_map.h".
>
>   - icssg_prueth.h now includes icssg_stats.h, giving it access to
>     the ARRAY_SIZE-based ICSSG_NUM_MIIG_STATS and ICSSG_NUM_PA_STATS
>     before they are used in the prueth_emac struct and ICSSG_NUM_STATS.
>
> Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
> ---
>  drivers/net/ethernet/ti/icssg/icssg_prueth.h | 3 +--
>  drivers/net/ethernet/ti/icssg/icssg_stats.h  | 7 ++++++-
>  2 files changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
> index df93d15c5b78..e2ccecb0a0dd 100644
> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
> @@ -43,6 +43,7 @@
>
>  #include "icssg_config.h"
>  #include "icss_iep.h"
> +#include "icssg_stats.h"
>  #include "icssg_switch_map.h"
>
>  #define PRUETH_MAX_MTU          (2000 - ETH_HLEN - ETH_FCS_LEN)
> @@ -57,8 +58,6 @@
>
>  #define ICSSG_MAX_RFLOWS       8       /* per slice */
>
> -#define ICSSG_NUM_PA_STATS     32
> -#define ICSSG_NUM_MIIG_STATS   60
>  /* Number of ICSSG related stats */
>  #define ICSSG_NUM_STATS (ICSSG_NUM_MIIG_STATS + ICSSG_NUM_PA_STATS)
>  #define ICSSG_NUM_STANDARD_STATS 31
> diff --git a/drivers/net/ethernet/ti/icssg/icssg_stats.h b/drivers/net/ethernet/ti/icssg/icssg_stats.h
> index 5ec0b38e0c67..b854eb587c1e 100644
> --- a/drivers/net/ethernet/ti/icssg/icssg_stats.h
> +++ b/drivers/net/ethernet/ti/icssg/icssg_stats.h
> @@ -8,10 +8,15 @@
>  #ifndef __NET_TI_ICSSG_STATS_H
>  #define __NET_TI_ICSSG_STATS_H
>
> -#include "icssg_prueth.h"
> +#include <linux/ethtool.h>
> +#include <linux/kernel.h>
> +#include "icssg_switch_map.h"
>
>  #define STATS_TIME_LIMIT_1G_MS    25000    /* 25 seconds @ 1G */
>
> +#define ICSSG_NUM_MIIG_STATS   ARRAY_SIZE(icssg_all_miig_stats)
> +#define ICSSG_NUM_PA_STATS     ARRAY_SIZE(icssg_all_pa_stats)
> +
>  struct miig_stats_regs {
>         /* Rx */
>         u32 rx_packets;
> --
> 2.34.1
>

One thing that caught my eye: icssg_all_miig_stats[] and
  icssg_all_pa_stats[] are 'static const' arrays in icssg_stats.h with
  ETH_GSTRING_LEN name buffers per entry. Right now only icssg_stats.c
  and icssg_ethtool.c pull them in. After this patch icssg_prueth.h
  includes icssg_stats.h, so every .c in the driver (classifier,
  common, config, mii_cfg, queues, switchdev, ...) ends up with its own
  static-const copy of both tables.

  Would a static_assert() work for what you're after? Something like:

    static const struct icssg_miig_stats icssg_all_miig_stats[] = {
        ...
    };
    static_assert(ARRAY_SIZE(icssg_all_miig_stats) == ICSSG_NUM_MIIG_STATS);

  next to each array, keeping the numeric #defines as-is. Then 2/2 fails
  to build the moment a new entry is added without bumping the count,
  which is the case you're guarding against — without touching the
  include graph.

What do you think ?

Cheers.

Re: [PATCH net-next 1/2] net: ti: icssg: Derive stats array lengths from ARRAY_SIZE

[MD Danish Anwar]

Hi David,

On 12/05/26 1:28 pm, David CARLIER wrote:
> Hi MD,
> 
> On Tue, 12 May 2026 at 07:06, MD Danish Anwar <danishanwar@ti.com> wrote:
>>
>> Replace the manually maintained ICSSG_NUM_MIIG_STATS and
>> ICSSG_NUM_PA_STATS constants with ARRAY_SIZE() expressions derived
>> directly from the corresponding stat descriptor arrays, so that adding
>> new entries to icssg_all_miig_stats[] or icssg_all_pa_stats[] no longer
>> requires a separate update to a numeric constant.
>>
>> To make this self-contained, break the circular include dependency
>> between icssg_stats.h and icssg_prueth.h:
>>
>>   - icssg_stats.h previously included icssg_prueth.h (transitively
>>     pulling in icssg_switch_map.h and ETH_GSTRING_LEN).  Replace that
>>     with direct includes of <linux/ethtool.h>, <linux/kernel.h> and
>>     "icssg_switch_map.h".
>>
>>   - icssg_prueth.h now includes icssg_stats.h, giving it access to
>>     the ARRAY_SIZE-based ICSSG_NUM_MIIG_STATS and ICSSG_NUM_PA_STATS
>>     before they are used in the prueth_emac struct and ICSSG_NUM_STATS.
>>
>> Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
>> ---
>>  drivers/net/ethernet/ti/icssg/icssg_prueth.h | 3 +--
>>  drivers/net/ethernet/ti/icssg/icssg_stats.h  | 7 ++++++-
>>  2 files changed, 7 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>> index df93d15c5b78..e2ccecb0a0dd 100644
>> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>> @@ -43,6 +43,7 @@
>>
>>  #include "icssg_config.h"
>>  #include "icss_iep.h"
>> +#include "icssg_stats.h"
>>  #include "icssg_switch_map.h"
>>
>>  #define PRUETH_MAX_MTU          (2000 - ETH_HLEN - ETH_FCS_LEN)
>> @@ -57,8 +58,6 @@
>>
>>  #define ICSSG_MAX_RFLOWS       8       /* per slice */
>>
>> -#define ICSSG_NUM_PA_STATS     32
>> -#define ICSSG_NUM_MIIG_STATS   60
>>  /* Number of ICSSG related stats */
>>  #define ICSSG_NUM_STATS (ICSSG_NUM_MIIG_STATS + ICSSG_NUM_PA_STATS)
>>  #define ICSSG_NUM_STANDARD_STATS 31
>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_stats.h b/drivers/net/ethernet/ti/icssg/icssg_stats.h
>> index 5ec0b38e0c67..b854eb587c1e 100644
>> --- a/drivers/net/ethernet/ti/icssg/icssg_stats.h
>> +++ b/drivers/net/ethernet/ti/icssg/icssg_stats.h
>> @@ -8,10 +8,15 @@
>>  #ifndef __NET_TI_ICSSG_STATS_H
>>  #define __NET_TI_ICSSG_STATS_H
>>
>> -#include "icssg_prueth.h"
>> +#include <linux/ethtool.h>
>> +#include <linux/kernel.h>
>> +#include "icssg_switch_map.h"
>>
>>  #define STATS_TIME_LIMIT_1G_MS    25000    /* 25 seconds @ 1G */
>>
>> +#define ICSSG_NUM_MIIG_STATS   ARRAY_SIZE(icssg_all_miig_stats)
>> +#define ICSSG_NUM_PA_STATS     ARRAY_SIZE(icssg_all_pa_stats)
>> +
>>  struct miig_stats_regs {
>>         /* Rx */
>>         u32 rx_packets;
>> --
>> 2.34.1
>>
> 
> One thing that caught my eye: icssg_all_miig_stats[] and
>   icssg_all_pa_stats[] are 'static const' arrays in icssg_stats.h with
>   ETH_GSTRING_LEN name buffers per entry. Right now only icssg_stats.c
>   and icssg_ethtool.c pull them in. After this patch icssg_prueth.h
>   includes icssg_stats.h, so every .c in the driver (classifier,
>   common, config, mii_cfg, queues, switchdev, ...) ends up with its own
>   static-const copy of both tables.
> 
>   Would a static_assert() work for what you're after? Something like:
> 

While adding more stats manually, The ARRAY_SIZE() approach was
explicitly requested by maintainer [1]:

This patch is a direct response to that feedback. static_assert() would
still require updating the numeric constant on every array change. The
goal here is to eliminate the need of manually incrementing stats count
whenever new stats are added

Your concern about multiple copies of table is noted and valid. Could
you advise on the preferred way to reconcile these two requirements? I
am happy to restructure if there is an approach that satisfies both.

[1]
https://lore.kernel.org/all/20260112181436.4s5ceywwembn674r@skbuf/#:~:text=Can%27t%20this%20be%20expressed%20as%20ARRAY_SIZE(icssg_all_pa_stats)%3F%20It%20is%20very%0Afragile%20to%20have%20to%20count%20and%20update%20this%20manually.


>     static const struct icssg_miig_stats icssg_all_miig_stats[] = {
>         ...
>     };
>     static_assert(ARRAY_SIZE(icssg_all_miig_stats) == ICSSG_NUM_MIIG_STATS);
> 
>   next to each array, keeping the numeric #defines as-is. Then 2/2 fails
>   to build the moment a new entry is added without bumping the count,
>   which is the case you're guarding against — without touching the
>   include graph.
> 
> What do you think ?
> 
> Cheers.

-- 
Thanks and Regards,
Danish

Re: [PATCH net-next 1/2] net: ti: icssg: Derive stats array lengths from ARRAY_SIZE

[David CARLIER]

Hi Danish,


On Tue, 12 May 2026 at 10:40, MD Danish Anwar <danishanwar@ti.com> wrote:
>
> Hi David,
>
> On 12/05/26 1:28 pm, David CARLIER wrote:
> > Hi MD,
> >
> > On Tue, 12 May 2026 at 07:06, MD Danish Anwar <danishanwar@ti.com> wrote:
> >>
> >> Replace the manually maintained ICSSG_NUM_MIIG_STATS and
> >> ICSSG_NUM_PA_STATS constants with ARRAY_SIZE() expressions derived
> >> directly from the corresponding stat descriptor arrays, so that adding
> >> new entries to icssg_all_miig_stats[] or icssg_all_pa_stats[] no longer
> >> requires a separate update to a numeric constant.
> >>
> >> To make this self-contained, break the circular include dependency
> >> between icssg_stats.h and icssg_prueth.h:
> >>
> >>   - icssg_stats.h previously included icssg_prueth.h (transitively
> >>     pulling in icssg_switch_map.h and ETH_GSTRING_LEN).  Replace that
> >>     with direct includes of <linux/ethtool.h>, <linux/kernel.h> and
> >>     "icssg_switch_map.h".
> >>
> >>   - icssg_prueth.h now includes icssg_stats.h, giving it access to
> >>     the ARRAY_SIZE-based ICSSG_NUM_MIIG_STATS and ICSSG_NUM_PA_STATS
> >>     before they are used in the prueth_emac struct and ICSSG_NUM_STATS.
> >>
> >> Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
> >> ---
> >>  drivers/net/ethernet/ti/icssg/icssg_prueth.h | 3 +--
> >>  drivers/net/ethernet/ti/icssg/icssg_stats.h  | 7 ++++++-
> >>  2 files changed, 7 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
> >> index df93d15c5b78..e2ccecb0a0dd 100644
> >> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
> >> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
> >> @@ -43,6 +43,7 @@
> >>
> >>  #include "icssg_config.h"
> >>  #include "icss_iep.h"
> >> +#include "icssg_stats.h"
> >>  #include "icssg_switch_map.h"
> >>
> >>  #define PRUETH_MAX_MTU          (2000 - ETH_HLEN - ETH_FCS_LEN)
> >> @@ -57,8 +58,6 @@
> >>
> >>  #define ICSSG_MAX_RFLOWS       8       /* per slice */
> >>
> >> -#define ICSSG_NUM_PA_STATS     32
> >> -#define ICSSG_NUM_MIIG_STATS   60
> >>  /* Number of ICSSG related stats */
> >>  #define ICSSG_NUM_STATS (ICSSG_NUM_MIIG_STATS + ICSSG_NUM_PA_STATS)
> >>  #define ICSSG_NUM_STANDARD_STATS 31
> >> diff --git a/drivers/net/ethernet/ti/icssg/icssg_stats.h b/drivers/net/ethernet/ti/icssg/icssg_stats.h
> >> index 5ec0b38e0c67..b854eb587c1e 100644
> >> --- a/drivers/net/ethernet/ti/icssg/icssg_stats.h
> >> +++ b/drivers/net/ethernet/ti/icssg/icssg_stats.h
> >> @@ -8,10 +8,15 @@
> >>  #ifndef __NET_TI_ICSSG_STATS_H
> >>  #define __NET_TI_ICSSG_STATS_H
> >>
> >> -#include "icssg_prueth.h"
> >> +#include <linux/ethtool.h>
> >> +#include <linux/kernel.h>
> >> +#include "icssg_switch_map.h"
> >>
> >>  #define STATS_TIME_LIMIT_1G_MS    25000    /* 25 seconds @ 1G */
> >>
> >> +#define ICSSG_NUM_MIIG_STATS   ARRAY_SIZE(icssg_all_miig_stats)
> >> +#define ICSSG_NUM_PA_STATS     ARRAY_SIZE(icssg_all_pa_stats)
> >> +
> >>  struct miig_stats_regs {
> >>         /* Rx */
> >>         u32 rx_packets;
> >> --
> >> 2.34.1
> >>
> >
> > One thing that caught my eye: icssg_all_miig_stats[] and
> >   icssg_all_pa_stats[] are 'static const' arrays in icssg_stats.h with
> >   ETH_GSTRING_LEN name buffers per entry. Right now only icssg_stats.c
> >   and icssg_ethtool.c pull them in. After this patch icssg_prueth.h
> >   includes icssg_stats.h, so every .c in the driver (classifier,
> >   common, config, mii_cfg, queues, switchdev, ...) ends up with its own
> >   static-const copy of both tables.
> >
> >   Would a static_assert() work for what you're after? Something like:
> >
>
> While adding more stats manually, The ARRAY_SIZE() approach was
> explicitly requested by maintainer [1]:
>
> This patch is a direct response to that feedback. static_assert() would
> still require updating the numeric constant on every array change. The
> goal here is to eliminate the need of manually incrementing stats count
> whenever new stats are added
>
> Your concern about multiple copies of table is noted and valid. Could
> you advise on the preferred way to reconcile these two requirements? I
> am happy to restructure if there is an approach that satisfies both.
>
> [1]
> https://lore.kernel.org/all/20260112181436.4s5ceywwembn674r@skbuf/#:~:text=Can%27t%20this%20be%20expressed%20as%20ARRAY_SIZE(icssg_all_pa_stats)%3F%20It%20is%20very%0Afragile%20to%20have%20to%20count%20and%20update%20this%20manually.
>
>
> >     static const struct icssg_miig_stats icssg_all_miig_stats[] = {
> >         ...
> >     };
> >     static_assert(ARRAY_SIZE(icssg_all_miig_stats) == ICSSG_NUM_MIIG_STATS);
> >
> >   next to each array, keeping the numeric #defines as-is. Then 2/2 fails
> >   to build the moment a new entry is added without bumping the count,
> >   which is the case you're guarding against — without touching the
> >   include graph.
> >
> > What do you think ?
> >
> > Cheers.
>
> --
> Thanks and Regards,
> Danish
>


  Thanks for digging up the context — fair point, I'd missed Vladimir's
  earlier ask. Reading it again though, what he calls fragile is the
  silent miscount, not the keystroke of typing a number. A static_assert
  turns "forgot to bump" into a build error, which I think gets you
  there.

  What about moving the two arrays into icssg_stats.c, declaring them
  extern in the header, and dropping a static_assert next to each
  definition? Numeric #defines stay where they are, icssg_prueth.h
  doesn't need to know about icssg_stats.h, and the tables live in one
  TU instead of every .o in the driver. If the count and the array
  disagree, you get a compile error on the spot.

  Probably worth keeping Vladimir on Cc for v2 in case he had something
  else in mind.

  Cheers,

[PATCH net-next 2/2] net: ti: icssg: Add HSR and LRE PA statistics

[MD Danish Anwar]

Add new firmware PA statistics counters for HSR and LRE to the ethtool
statistics exposed by the ICSSG driver.

New statistics added:
 - FW_HSR_FWD_CHECK_FAIL_DROP: Packets dropped on the HSR forwarding path
 - FW_HSR_HE_CHECK_FAIL_DROP: Packets dropped on the HSR host egress path
 - FW_HSR_SKIP_HOST_DUP_DISCARD_FRAMES: Frames with duplicate discard
   skipped
 - FW_LRE_CNT_UNIQUE/DUPLICATE/MULTIPLE_RX: LRE duplicate detetcion
   counters
 - FW_LRE_CNT_RX/TX: LRE per-port frame counters
 - FW_LRE_CNT_OWN_RX: Own HSR tagged frames received
 - FW_LRE_CNT_ERRWRONGLAN: Frames with wrong LAN identifier (PRP)

Document the new HSR/LRE statistics in icssg_prueth.rst.

Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
 .../device_drivers/ethernet/ti/icssg_prueth.rst        | 10 ++++++++++
 drivers/net/ethernet/ti/icssg/icssg_common.c           |  7 +++++--
 drivers/net/ethernet/ti/icssg/icssg_stats.h            | 10 ++++++++++
 drivers/net/ethernet/ti/icssg/icssg_switch_map.h       | 10 ++++++++++
 4 files changed, 35 insertions(+), 2 deletions(-)

diff --git a/Documentation/networking/device_drivers/ethernet/ti/icssg_prueth.rst b/Documentation/networking/device_drivers/ethernet/ti/icssg_prueth.rst
index da21ddf431bb..b0bda7327b2a 100644
--- a/Documentation/networking/device_drivers/ethernet/ti/icssg_prueth.rst
+++ b/Documentation/networking/device_drivers/ethernet/ti/icssg_prueth.rst
@@ -54,3 +54,13 @@ These statistics are as follows,
  - ``FW_HOST_TX_PKT_CNT``: Number of valid packets copied by RTU0 to Tx queues
  - ``FW_HOST_EGRESS_Q_PRE_OVERFLOW``: Host Egress Q (Pre-emptible) Overflow Counter
  - ``FW_HOST_EGRESS_Q_EXP_OVERFLOW``: Host Egress Q (Pre-emptible) Overflow Counter
+ - ``FW_HSR_FWD_CHECK_FAIL_DROP``: Packets dropped on the HSR forwarding path due to failed checks
+ - ``FW_HSR_HE_CHECK_FAIL_DROP``: Packets dropped on the host egress path due to failed checks
+ - ``FW_HSR_SKIP_HOST_DUP_DISCARD_FRAMES``: Frames for which the host duplicate discard check was skipped
+ - ``FW_LRE_CNT_UNIQUE_RX``: Number of frames received with no duplicate detected
+ - ``FW_LRE_CNT_DUPLICATE_RX``: Number of frames received for which exactly one duplicate was detected
+ - ``FW_LRE_CNT_MULTIPLE_RX``: Number of frames received for which more than one duplicate was detected
+ - ``FW_LRE_CNT_RX``: Number of HSR/PRP tagged frames received
+ - ``FW_LRE_CNT_TX``: Number of HSR/PRP tagged frames sent
+ - ``FW_LRE_CNT_OWN_RX``: Number of HSR/PRP tagged frames received whose source MAC matches the node's own address
+ - ``FW_LRE_CNT_ERRWRONGLAN``: Number of frames received with a wrong LAN identifier, PRP only
diff --git a/drivers/net/ethernet/ti/icssg/icssg_common.c b/drivers/net/ethernet/ti/icssg/icssg_common.c
index a28a608f9bf4..e7a51a9eee24 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_common.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_common.c
@@ -1633,7 +1633,8 @@ void icssg_ndo_get_stats64(struct net_device *ndev,
 			    emac_get_stat_by_name(emac, "FW_RX_EOF_SHORT_FRMERR") +
 			    emac_get_stat_by_name(emac, "FW_RX_B0_DROP_EARLY_EOF") +
 			    emac_get_stat_by_name(emac, "FW_RX_EXP_FRAG_Q_DROP") +
-			    emac_get_stat_by_name(emac, "FW_RX_FIFO_OVERRUN");
+			    emac_get_stat_by_name(emac, "FW_RX_FIFO_OVERRUN") +
+			    emac_get_stat_by_name(emac, "FW_LRE_CNT_ERRWRONGLAN");
 	stats->rx_dropped = ndev->stats.rx_dropped +
 			    emac_get_stat_by_name(emac, "FW_DROPPED_PKT") +
 			    emac_get_stat_by_name(emac, "FW_INF_PORT_DISABLED") +
@@ -1643,7 +1644,9 @@ void icssg_ndo_get_stats64(struct net_device *ndev,
 			    emac_get_stat_by_name(emac, "FW_INF_DROP_TAGGED") +
 			    emac_get_stat_by_name(emac, "FW_INF_DROP_PRIOTAGGED") +
 			    emac_get_stat_by_name(emac, "FW_INF_DROP_NOTAG") +
-			    emac_get_stat_by_name(emac, "FW_INF_DROP_NOTMEMBER");
+			    emac_get_stat_by_name(emac, "FW_INF_DROP_NOTMEMBER") +
+			    emac_get_stat_by_name(emac, "FW_HSR_FWD_CHECK_FAIL_DROP") +
+			    emac_get_stat_by_name(emac, "FW_HSR_HE_CHECK_FAIL_DROP");
 	stats->tx_errors  = ndev->stats.tx_errors;
 	stats->tx_dropped = ndev->stats.tx_dropped +
 			    emac_get_stat_by_name(emac, "FW_RTU_PKT_DROP") +
diff --git a/drivers/net/ethernet/ti/icssg/icssg_stats.h b/drivers/net/ethernet/ti/icssg/icssg_stats.h
index b854eb587c1e..af3fcecac403 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_stats.h
+++ b/drivers/net/ethernet/ti/icssg/icssg_stats.h
@@ -204,6 +204,16 @@ static const struct icssg_pa_stats icssg_all_pa_stats[] = {
 	ICSSG_PA_STATS(FW_HOST_TX_PKT_CNT),
 	ICSSG_PA_STATS(FW_HOST_EGRESS_Q_PRE_OVERFLOW),
 	ICSSG_PA_STATS(FW_HOST_EGRESS_Q_EXP_OVERFLOW),
+	ICSSG_PA_STATS(FW_HSR_FWD_CHECK_FAIL_DROP),
+	ICSSG_PA_STATS(FW_HSR_HE_CHECK_FAIL_DROP),
+	ICSSG_PA_STATS(FW_HSR_SKIP_HOST_DUP_DISCARD_FRAMES),
+	ICSSG_PA_STATS(FW_LRE_CNT_UNIQUE_RX),
+	ICSSG_PA_STATS(FW_LRE_CNT_DUPLICATE_RX),
+	ICSSG_PA_STATS(FW_LRE_CNT_MULTIPLE_RX),
+	ICSSG_PA_STATS(FW_LRE_CNT_RX),
+	ICSSG_PA_STATS(FW_LRE_CNT_TX),
+	ICSSG_PA_STATS(FW_LRE_CNT_OWN_RX),
+	ICSSG_PA_STATS(FW_LRE_CNT_ERRWRONGLAN),
 };
 
 #endif /* __NET_TI_ICSSG_STATS_H */
diff --git a/drivers/net/ethernet/ti/icssg/icssg_switch_map.h b/drivers/net/ethernet/ti/icssg/icssg_switch_map.h
index 7e053b8af3ec..bd2d54dd7f45 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_switch_map.h
+++ b/drivers/net/ethernet/ti/icssg/icssg_switch_map.h
@@ -266,5 +266,15 @@
 #define FW_HOST_TX_PKT_CNT		0x0250
 #define FW_HOST_EGRESS_Q_PRE_OVERFLOW	0x0258
 #define FW_HOST_EGRESS_Q_EXP_OVERFLOW	0x0260
+#define FW_HSR_FWD_CHECK_FAIL_DROP		0x0500
+#define FW_HSR_HE_CHECK_FAIL_DROP		0x0508
+#define FW_HSR_SKIP_HOST_DUP_DISCARD_FRAMES	0x0510
+#define FW_LRE_CNT_UNIQUE_RX			0x0518
+#define FW_LRE_CNT_DUPLICATE_RX			0x0520
+#define FW_LRE_CNT_MULTIPLE_RX			0x0528
+#define FW_LRE_CNT_RX				0x0530
+#define FW_LRE_CNT_TX				0x0538
+#define FW_LRE_CNT_OWN_RX			0x0540
+#define FW_LRE_CNT_ERRWRONGLAN			0x0548
 
 #endif /* __NET_TI_ICSSG_SWITCH_MAP_H  */
-- 
2.34.1