Linux Documentation
 help / color / mirror / Atom feed
* [PATCH v3 0/6] drm/amd/display: Commit panel_power_savings writes from the kernel
@ 2026-11-16 14:01 Hugo Sales via B4 Relay
  2026-11-16 14:01 ` [PATCH v3 1/6] drm/amd/display: Render the panel power savings kernel-doc Hugo Sales via B4 Relay
                   ` (5 more replies)
  0 siblings, 6 replies; 8+ messages in thread
From: Hugo Sales via B4 Relay @ 2026-11-16 14:01 UTC (permalink / raw)
  To: Harry Wentland, Leo Li, Rodrigo Siqueira, Alex Deucher,
	Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
	Jonathan Corbet, Shuah Khan
  Cc: Mario Limonciello, Ray Wu, Alex Hung, Bhawanpreet Lakha,
	Ivan Lipski, Chenyu Chen, David Weber, Shivam Kalra,
	Hamza Mahfooz, Christian König, David Airlie, Simona Vetter,
	amd-gfx, dri-devel, linux-doc, linux-kernel, Hugo Sales

A write to panel_power_savings stores the ABM level and sends a hotplug
uevent, but the level reaches the hardware only on the next atomic commit
that includes the eDP connector. Hyprland adds the connector to a commit
only on a modeset or when a connector property it sets changes, so on my
laptop the file read back the new level and the backlight never changed.
power-profiles-daemon writes this file on every profile, AC and battery
change, so none of its ABM changes applied

This shouldn't need a fix in every compositor. The file is for writers
that aren't the DRM master, like power-profiles-daemon, and they can't
commit anything themselves. Today they depend on the master taking a
generic hotplug uevent as a cue to commit the connector again. Nothing
documents that, and a compositor has no reason to read a hotplug event as
"a property you never touched has changed". A compositor that wants to own
ABM sets the 'adaptive backlight modulation' property, and from then on
the file returns -EBUSY. The file has to work without the master's help.
The backlight device already does: a brightness write goes straight to DC,
with no commit at all

This series makes the write commit the level itself:

  1. Render the existing kernel-doc, which no rst file included
  2. Add the CRTC's planes to a commit that changes the ABM level, which
     the forced modeset used to do. With VRR active, such a commit would
     otherwise carry only the primary plane
  3. Stop forcing a modeset when the connector's ABM level changes. DM
     already sends a new level as a stream update, and the commit that
     added the modeset flag also added the CRTC, which is all that update
     needs
  4. Move the store tests onto a full pipe the store can commit to
  5. Commit the level from the store through a duplicated connector
     state. The write returns the commit's error and no longer sends a
     uevent
  6. KUnit cases for a connector with the CRTC on, off and failing
     atomic check

Patch 3 also asks, below its cut, whether scaling can leave the same
check

From my reading, other commits that add the CRTC but no planes, like a
change of the HDR metadata, can drop an overlay the same way while VRR is
active. That needs a fix in the CRTC check that pulls in only the primary
plane, which I'll send as a separate series

Hamza's v1 of the 2024 patch that added this file had no flush [1], and
Mario found that the level only took effect on the next modeset [2].
That patch's v2 changelog says "force an atomic commit" [3], but what
was merged, commit 63d0b87213a0 ("drm/amd/display: add
panel_power_savings sysfs entry to eDP connectors"), sends a hotplug
event instead

Commit 8d20a066fa9b ("drm/amd/display: change the panel power savings
level without a modeset") later applied the level outside atomic. It
broke igt abm_gradual, and commit 95aaa207e9ef ("Revert "drm/amd/display:
change the panel power savings level without a modeset"") reverted it.
The objections back then were to sysfs overriding the DRM master at all
[4], which the property above now covers. I didn't find any discussion
that rejects an internal atomic commit

A write now returns the commit's error instead of storing a level the
hardware may never get. power-profiles-daemon logs the error and tries
again on its next profile, AC or battery change. Nothing I found reads
the uevent for more than a cue to commit the connector, which the kernel
now does itself

The commit is blocking, so a write can hold the CRTC locks for up to a
frame while a compositor commit waits

Tested on my laptop (ASUS ROG Flow X13 GV301QH, DCN 2.1) with v3 on
7.3.4, under Hyprland with no modeset during the run:

  - 25 writes cycling levels 0 to 4 all succeeded and read back, with
    nothing in the kernel log. A write sends no uevent
  - I wrote 4, 0, 4, 0, 2 and 0 six seconds apart and read
    amdgpu_current_backlight_pwm and amdgpu_target_backlight_pwm every
    half second. After each 0, the backlight was back at full PWM by the
    next sample. After each 4 or 2, the target dropped, to 25% of full at
    4 and 52% at 2, and the backlight ramped down to it
  - This series on top of "drm/amd/display: Leave self-refresh before an
    ABM level update", with the panel in self-refresh before each write:
    all five writes that changed the level took the panel out of
    self-refresh for the update
  - Writes of the current level return without a commit, so they leave
    the panel in self-refresh

On a text console, igt amd_abm passed all five subtests. I also ran an
IGT test that puts an overlay plane over the primary plane and turns VRR
on, so the CRTC idles at the panel's 40 Hz minimum. On v2, a write took
the overlay off the screen until the next flip. With v3, the overlay
stayed. With VRR off, it stayed on both

[1] https://lore.kernel.org/amd-gfx/20240126222300.119292-1-hamza.mahfooz@amd.com/
[2] https://lore.kernel.org/amd-gfx/1162e59e-3f53-4c84-b186-bb2f4642216b@amd.com/
[3] https://lore.kernel.org/amd-gfx/20240202152837.7388-1-hamza.mahfooz@amd.com/
[4] https://lore.kernel.org/amd-gfx/b117ccc0-6569-4753-9cb9-c304f9e50d30@amd.com/

Changes in v3:
- New patch 2: add the CRTC's planes to a commit that changes the
  level. Without the modeset, such a commit with VRR active carried only
  the primary plane, and DC dropped an active overlay until the next
  flip. Sashiko's finding, reproduced on v2
- Patch 3: credit David Weber, who sent the same condition change in
  August (Chenyu)
- Patch 5: say that a compositor commit waits for the write instead of
  failing with -EBUSY, in the kernel-doc and below the cut (Chenyu)
- Link to v2: https://lore.kernel.org/r/20261113-abm-sysfs-commit-v2-0-5808d17a7e89@hsal.es

Changes in v2:
- Patch 3 (v2's 2): name commit b05e2c5e81f9 ("drm/amd/display: Update
  ABM crtc state on non-modeset") as the one that lets the non-modeset
  path carry the level, say the KMS property loses its modeset too, and
  say "drm/amd/display: Leave self-refresh before an ABM level update"
  has to go first
- Patch 4 (v2's 3): set level 2 before the test that writes 0, so the
  write changes the level
- Patch 5 (v2's 4): return without a commit when the level doesn't
  change (Harry). A write that changes nothing, or that the DRM master
  forbids, no longer wakes the GPU. A write that a signal interrupts
  restarts instead of failing with -EINTR
- Patch 6 (v2's 5): test a write of the current level, check that it and
  a forbidden write leave a runtime-suspended GPU suspended, and fold
  the CRTC on and off cases into one parameterised test
- Link to v1: https://lore.kernel.org/r/20261102-abm-sysfs-commit-v1-0-e5addfd9539a@hsal.es

---
Hugo Sales (6):
      drm/amd/display: Render the panel power savings kernel-doc
      drm/amd/display: Add the CRTC's planes when the ABM level changes
      drm/amd/display: Don't force a modeset when the ABM level changes
      drm/amd/display: Give the panel_power_savings store tests a full pipe
      drm/amd/display: Commit panel_power_savings writes from the kernel
      drm/amd/display: Test panel_power_savings commits

 .../gpu/amdgpu/display/display-manager.rst         |   3 +
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  |  17 +-
 .../amd/display/amdgpu_dm/amdgpu_dm_backlight.c    | 118 ++++++++-
 .../amdgpu_dm/tests/amdgpu_dm_backlight_test.c     | 271 ++++++++++++++++++++-
 4 files changed, 390 insertions(+), 19 deletions(-)
---
base-commit: ba496bb837882eb1af58f41572fc289e46c77b8c
change-id: 20261101-abm-sysfs-commit-96a38de1ac66
prerequisite-change-id: 20261113-amdgpu-psr-abm-update-next-de20bc23b12c:v2
prerequisite-patch-id: c6cbeb4671914753ab7526369c2612039ae16504
prerequisite-patch-id: efc64b5a0a1bc2d46494d4797b0d25447b174076
prerequisite-patch-id: 496307c9687a947cfbfdcf1b6d0ad6ba1b6d4089

Best regards,
--  
Hugo Sales <hugo@hsal.es>



^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2026-11-16 14:02 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-16 14:01 [PATCH v3 0/6] drm/amd/display: Commit panel_power_savings writes from the kernel Hugo Sales via B4 Relay
2026-11-16 14:01 ` [PATCH v3 1/6] drm/amd/display: Render the panel power savings kernel-doc Hugo Sales via B4 Relay
2026-11-16 14:02   ` Mario Limonciello
2026-11-16 14:01 ` [PATCH v3 2/6] drm/amd/display: Add the CRTC's planes when the ABM level changes Hugo Sales via B4 Relay
2026-11-16 14:01 ` [PATCH v3 3/6] drm/amd/display: Don't force a modeset " Hugo Sales via B4 Relay
2026-11-16 14:01 ` [PATCH v3 4/6] drm/amd/display: Give the panel_power_savings store tests a full pipe Hugo Sales via B4 Relay
2026-11-16 14:01 ` [PATCH v3 5/6] drm/amd/display: Commit panel_power_savings writes from the kernel Hugo Sales via B4 Relay
2026-11-16 14:01 ` [PATCH v3 6/6] drm/amd/display: Test panel_power_savings commits Hugo Sales via B4 Relay

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox