[PATCH v5 8/9] crash_dump: Disallow configfs/crash_dm_crypt_key/reuse if crash hotplug supported

[PATCH v5 8/9] crash_dump: Disallow configfs/crash_dm_crypt_key/reuse if crash hotplug supported

[Coiby Xu]

If crash hotplug is supported, dm-crypt keys saved to reserved memory
will be taken care of automatically. Thus it doesn't make sense to use
configfs/crash_dm_crypt_key/reuse. Not reserving
image->dm_crypt_keys_addr makes it implicitly to disallow using this
API. Currently x86_64 and ppc64le have implemented crash hotplug
feature.

Also update the doc accordingly. Note two doc issues are fixed as well.

Fixes: 9ebfa8dcaea7 ("crash_dump: reuse saved dm crypt keys for CPU/memory hot-plugging")
Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
---
 Documentation/admin-guide/kdump/kdump.rst | 16 ++++++++++------
 kernel/crash_dump_dm_crypt.c              | 12 ++++++++----
 2 files changed, 18 insertions(+), 10 deletions(-)

diff --git a/Documentation/admin-guide/kdump/kdump.rst b/Documentation/admin-guide/kdump/kdump.rst
index 7587caadbae1..0bf2eb100a05 100644
--- a/Documentation/admin-guide/kdump/kdump.rst
+++ b/Documentation/admin-guide/kdump/kdump.rst
@@ -577,9 +577,10 @@ with /sys/kernel/config/crash_dm_crypt_keys for setup,
 
 1. Tell the first kernel what logon keys are needed to unlock the disk volumes,
     # Add key #1
-    mkdir /sys/kernel/config/crash_dm_crypt_keys/7d26b7b4-e342-4d2d-b660-7426b0996720
+    VOL1_UUID=7d26b7b4-e342-4d2d-b660-7426b0996720
+    mkdir /sys/kernel/config/crash_dm_crypt_keys/$VOL1_UUID
     # Add key #1's description
-    echo cryptsetup:7d26b7b4-e342-4d2d-b660-7426b0996720 > /sys/kernel/config/crash_dm_crypt_keys/description
+    echo cryptsetup:$VOL1_UUID > /sys/kernel/config/crash_dm_crypt_keys/$VOL1_UUID/description
 
     # how many keys do we have now?
     cat /sys/kernel/config/crash_dm_crypt_keys/count
@@ -591,15 +592,18 @@ with /sys/kernel/config/crash_dm_crypt_keys for setup,
     cat /sys/kernel/config/crash_dm_crypt_keys/count
     2
 
-    # To support CPU/memory hot-plugging, reuse keys already saved to reserved
-    # memory
-    echo true > /sys/kernel/config/crash_dm_crypt_key/reuse
-
 2. Load the dump-capture kernel
 
 3. After the dump-capture kerne get booted, restore the keys to user keyring
    echo yes > /sys/kernel/crash_dm_crypt_keys/restore
 
+For CPU/memory hot-plugging, you can reuse keys already saved to reserved
+memory before reloading the kdump image,
+    echo true > /sys/kernel/config/crash_dm_crypt_keys/reuse
+
+Note if crash hotplug is supported, this API is totally unnecessary thus will
+be disabled automatically.
+
 Contact
 =======
 
diff --git a/kernel/crash_dump_dm_crypt.c b/kernel/crash_dump_dm_crypt.c
index bc70fbb79e0f..666c1f0c9e3b 100644
--- a/kernel/crash_dump_dm_crypt.c
+++ b/kernel/crash_dump_dm_crypt.c
@@ -324,7 +324,7 @@ static ssize_t config_keys_reuse_store(struct config_item *item,
 
 	r = -EINVAL;
 	if (!kexec_crash_image || !kexec_crash_image->dm_crypt_keys_addr) {
-		pr_debug("dm-crypt keys haven't be saved to crash-reserved memory\n");
+		pr_debug("dm-crypt keys haven't be saved to crash-reserved memory or crash hotplug supported\n");
 		goto unlock;
 	}
 
@@ -522,14 +522,18 @@ int crash_load_dm_crypt_keys(struct kimage *image)
 void crash_dm_crypt_cleanup(struct kimage *image)
 {
 	/*
-	 * For CPU/memory hot-plugging, the kdump image will be reloaded. Prevent
-	 * keys_header from being cleaned up during unloading when
-	 * is_dm_key_reused=true
+	 * For CPU/memory hot-plugging without CONFIG_CRASH_HOTPLUG, the whole kdump
+	 * image will be reloaded. Prevent keys_header from being cleaned up during
+	 * unloading when is_dm_key_reused=true
 	 */
 	if (!is_dm_key_reused) {
 		kfree_sensitive(keys_header);
 		keys_header = NULL;
 	}
+#ifdef CONFIG_CRASH_HOTPLUG
+	if (image->hotplug_support)
+		image->dm_crypt_keys_addr = 0;
+#endif
 }
 
 static int __init configfs_dmcrypt_keys_init(void)
-- 
2.55.0

[PATCH v5 9/9] Documentation: kdump: Add arm64 and ppc64le to encrypted dump target support list

[Coiby Xu]

The encrypted dump target support is now extended to arm64 and ppc64le.

Fixes: e3a84be1ec2f ("arm64,ppc64le/kdump: pass dm-crypt keys to kdump kernel")
Reported-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
---
 Documentation/admin-guide/kdump/kdump.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/admin-guide/kdump/kdump.rst b/Documentation/admin-guide/kdump/kdump.rst
index 0bf2eb100a05..36ad6125c670 100644
--- a/Documentation/admin-guide/kdump/kdump.rst
+++ b/Documentation/admin-guide/kdump/kdump.rst
@@ -572,8 +572,8 @@ Write the dump file to encrypted disk volume
 ============================================
 
 CONFIG_CRASH_DM_CRYPT can be enabled to support saving the dump file to an
-encrypted disk volume (only x86_64 supported for now). User space can interact
-with /sys/kernel/config/crash_dm_crypt_keys for setup,
+encrypted disk volume (only x86_64, arm64, ppc64le supported for now). User
+space can interact with /sys/kernel/config/crash_dm_crypt_keys for setup,
 
 1. Tell the first kernel what logon keys are needed to unlock the disk volumes,
     # Add key #1
-- 
2.55.0

Re: [PATCH v5 9/9] Documentation: kdump: Add arm64 and ppc64le to encrypted dump target support list

[sashiko-bot]

> The encrypted dump target support is now extended to arm64 and ppc64le.
> 
> Fixes: e3a84be1ec2f ("arm64,ppc64le/kdump: pass dm-crypt keys to kdump kernel")
> Reported-by: Sourabh Jain <sourabhjain@linux.ibm.com>
> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
> Signed-off-by: Coiby Xu <coiby.xu@gmail.com>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260909003657.1570544-1-coiby.xu@gmail.com?part=9

Re: [PATCH v5 8/9] crash_dump: Disallow configfs/crash_dm_crypt_key/reuse if crash hotplug supported

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:

New issues:
- [High] Setting `image->dm_crypt_keys_addr = 0` during kexec image cleanup bypasses page table memory protections, leaving sensitive dm-crypt volume logon keys accessible/readable in the primary kernel's memory.

Pre-existing issues:
- [High] Reused dm-crypt keys are permanently lost and silently dropped during ARM64 kexec segment placement retries due to premature freeing of `keys_header`.
--

commit ccd76380ffc2464293abaa1bf7ed098e55227890
Author: Coiby Xu <coiby.xu@gmail.com>

crash_dump: Disallow configfs/crash_dm_crypt_key/reuse if crash hotplug supported

If crash hotplug is supported, dm-crypt keys saved to reserved memory
will be taken care of automatically. Thus it doesn't make sense to use
configfs/crash_dm_crypt_key/reuse. Not reserving
image->dm_crypt_keys_addr makes it implicitly to disallow using this
API. Currently x86_64 and ppc64le have implemented crash hotplug
feature.

Also update the doc accordingly. Note two doc issues are fixed as well.

> diff --git a/kernel/crash_dump_dm_crypt.c b/kernel/crash_dump_dm_crypt.c
> index bc70fbb79e0f6..666c1f0c9e3b4 100644
> --- a/kernel/crash_dump_dm_crypt.c
> +++ b/kernel/crash_dump_dm_crypt.c

[ ... ]

> @@ -522,14 +522,18 @@ int crash_load_dm_crypt_keys(struct kimage *image)
>  void crash_dm_crypt_cleanup(struct kimage *image)
>  {
>  	/*
> -	 * For CPU/memory hot-plugging, the kdump image will be reloaded. Prevent
> -	 * keys_header from being cleaned up during unloading when
> -	 * is_dm_key_reused=true
> +	 * For CPU/memory hot-plugging without CONFIG_CRASH_HOTPLUG, the whole kdump
> +	 * image will be reloaded. Prevent keys_header from being cleaned up during
> +	 * unloading when is_dm_key_reused=true
>  	 */
>  	if (!is_dm_key_reused) {

[Severity: High]
This is a pre-existing issue, but can reused dm-crypt keys be permanently
lost during ARM64 kexec segment placement retries due to premature freeing
of keys_header?

On ARM64, if the first kexec segment placement attempt succeeds for dm-crypt
keys but fails on a subsequent segment (like initrd), it triggers a retry
loop. On the first pass, crash_load_dm_crypt_keys() unsets the
is_dm_key_reused flag:

kernel/crash_dump_dm_crypt.c:crash_load_dm_crypt_keys() {
    ...
out:
    is_dm_key_reused = false;
    return r;
}

The error path then calls crash_dm_crypt_cleanup(), which unconditionally
frees keys_header since the flag is now false:

arch/arm64/kernel/kexec_image.c:image_load() {
    ...
        image->nr_segments -= 1;
        kbuf.buf_min = kernel_segment->mem + kernel_segment->memsz;
        kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
        crash_dm_crypt_cleanup(image);
    ...
}

On the next iteration, crash_load_dm_crypt_keys() is called again but exits
early without allocating keys, leaving the crash kernel without decryption
keys.

>  		kfree_sensitive(keys_header);
>  		keys_header = NULL;
>  	}
> +#ifdef CONFIG_CRASH_HOTPLUG
> +	if (image->hotplug_support)
> +		image->dm_crypt_keys_addr = 0;

[Severity: High]
Does setting image->dm_crypt_keys_addr to 0 bypass page table memory
protections, leaving sensitive dm-crypt volume logon keys accessible in the
primary kernel's memory?

When crash_dm_crypt_cleanup() is called during kexec file load, it zeroes
image->dm_crypt_keys_addr. Subsequently, sys_kexec_file_load() applies
memory protections:

kernel/kexec_file.c:sys_kexec_file_load() {
    ...
    kimage_file_post_load_cleanup(image);
exchange:
    image = xchg(dest_image, image);
out:
#ifdef CONFIG_CRASH_DUMP
    if ((flags & KEXEC_FILE_ON_CRASH) && kexec_crash_image)
        arch_kexec_protect_crashkres();
    ...
}

Immediately afterward, kexec_mark_dm_crypt_keys() (called by
arch_kexec_protect_crashkres()) checks this address:

arch/x86/kernel/machine_kexec_64.c:kexec_mark_dm_crypt_keys() {
    ...
    if (kexec_crash_image->dm_crypt_keys_addr) {
        start_paddr = kexec_crash_image->dm_crypt_keys_addr;
        ...
        set_memory_np(...);
    ...
}

Since the address evaluates to 0, it completely skips applying the
non-present page table protections (set_memory_np()), exposing decryption
keys in system RAM.

> +#endif
>  }
>  
>  static int __init configfs_dmcrypt_keys_init(void)

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260909003657.1570544-1-coiby.xu@gmail.com?part=8

Re: [PATCH v5 8/9] crash_dump: Disallow configfs/crash_dm_crypt_key/reuse if crash hotplug supported

[Randy Dunlap]

On 9/8/26 5:36 PM, Coiby Xu wrote:
> If crash hotplug is supported, dm-crypt keys saved to reserved memory
> will be taken care of automatically. Thus it doesn't make sense to use
> configfs/crash_dm_crypt_key/reuse. Not reserving
> image->dm_crypt_keys_addr makes it implicitly to disallow using this
> API. Currently x86_64 and ppc64le have implemented crash hotplug
> feature.
> 
> Also update the doc accordingly. Note two doc issues are fixed as well.
> 
> Fixes: 9ebfa8dcaea7 ("crash_dump: reuse saved dm crypt keys for CPU/memory hot-plugging")
> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
> Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
> ---
>  Documentation/admin-guide/kdump/kdump.rst | 16 ++++++++++------
>  kernel/crash_dump_dm_crypt.c              | 12 ++++++++----
>  2 files changed, 18 insertions(+), 10 deletions(-)
> 
> diff --git a/Documentation/admin-guide/kdump/kdump.rst b/Documentation/admin-guide/kdump/kdump.rst
> index 7587caadbae1..0bf2eb100a05 100644
> --- a/Documentation/admin-guide/kdump/kdump.rst
> +++ b/Documentation/admin-guide/kdump/kdump.rst
> @@ -577,9 +577,10 @@ with /sys/kernel/config/crash_dm_crypt_keys for setup,
>  
>  1. Tell the first kernel what logon keys are needed to unlock the disk volumes,
>      # Add key #1
> -    mkdir /sys/kernel/config/crash_dm_crypt_keys/7d26b7b4-e342-4d2d-b660-7426b0996720
> +    VOL1_UUID=7d26b7b4-e342-4d2d-b660-7426b0996720
> +    mkdir /sys/kernel/config/crash_dm_crypt_keys/$VOL1_UUID
>      # Add key #1's description
> -    echo cryptsetup:7d26b7b4-e342-4d2d-b660-7426b0996720 > /sys/kernel/config/crash_dm_crypt_keys/description
> +    echo cryptsetup:$VOL1_UUID > /sys/kernel/config/crash_dm_crypt_keys/$VOL1_UUID/description
>  
>      # how many keys do we have now?
>      cat /sys/kernel/config/crash_dm_crypt_keys/count
> @@ -591,15 +592,18 @@ with /sys/kernel/config/crash_dm_crypt_keys for setup,
>      cat /sys/kernel/config/crash_dm_crypt_keys/count
>      2
>  
> -    # To support CPU/memory hot-plugging, reuse keys already saved to reserved
> -    # memory
> -    echo true > /sys/kernel/config/crash_dm_crypt_key/reuse
> -
>  2. Load the dump-capture kernel
>  
>  3. After the dump-capture kerne get booted, restore the keys to user keyring

                             kernel is booted,

>     echo yes > /sys/kernel/crash_dm_crypt_keys/restore
>  
> +For CPU/memory hot-plugging, you can reuse keys already saved to reserved
> +memory before reloading the kdump image,
> +    echo true > /sys/kernel/config/crash_dm_crypt_keys/reuse
> +
> +Note if crash hotplug is supported, this API is totally unnecessary thus will
> +be disabled automatically.
> +
>  Contact
>  =======
>  
-- 
~Randy

Re: [PATCH v5 9/9] Documentation: kdump: Add arm64 and ppc64le to encrypted dump target support list

[Randy Dunlap]

On 9/8/26 5:36 PM, Coiby Xu wrote:
> The encrypted dump target support is now extended to arm64 and ppc64le.
> 
> Fixes: e3a84be1ec2f ("arm64,ppc64le/kdump: pass dm-crypt keys to kdump kernel")
> Reported-by: Sourabh Jain <sourabhjain@linux.ibm.com>
> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
> Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
> ---
>  Documentation/admin-guide/kdump/kdump.rst | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/admin-guide/kdump/kdump.rst b/Documentation/admin-guide/kdump/kdump.rst
> index 0bf2eb100a05..36ad6125c670 100644
> --- a/Documentation/admin-guide/kdump/kdump.rst
> +++ b/Documentation/admin-guide/kdump/kdump.rst
> @@ -572,8 +572,8 @@ Write the dump file to encrypted disk volume
>  ============================================
>  
>  CONFIG_CRASH_DM_CRYPT can be enabled to support saving the dump file to an
> -encrypted disk volume (only x86_64 supported for now). User space can interact
> -with /sys/kernel/config/crash_dm_crypt_keys for setup,
> +encrypted disk volume (only x86_64, arm64, ppc64le supported for now). User
> +space can interact with /sys/kernel/config/crash_dm_crypt_keys for setup,

                                                                  for setup.

>  
>  1. Tell the first kernel what logon keys are needed to unlock the disk volumes,
>      # Add key #1

-- 
~Randy

Re: [PATCH v5 8/9] crash_dump: Disallow configfs/crash_dm_crypt_key/reuse if crash hotplug supported

[Coiby Xu]

On Tue, Sep 08, 2026 at 10:46:03PM -0700, Randy Dunlap wrote:
>
>
>On 9/8/26 5:36 PM, Coiby Xu wrote:
>> If crash hotplug is supported, dm-crypt keys saved to reserved memory
>> will be taken care of automatically. Thus it doesn't make sense to use
>> configfs/crash_dm_crypt_key/reuse. Not reserving
>> image->dm_crypt_keys_addr makes it implicitly to disallow using this
>> API. Currently x86_64 and ppc64le have implemented crash hotplug
>> feature.
>>
>> Also update the doc accordingly. Note two doc issues are fixed as well.
>>
>> Fixes: 9ebfa8dcaea7 ("crash_dump: reuse saved dm crypt keys for CPU/memory hot-plugging")
>> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
>> Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
>> ---
>>  Documentation/admin-guide/kdump/kdump.rst | 16 ++++++++++------
>>  kernel/crash_dump_dm_crypt.c              | 12 ++++++++----
>>  2 files changed, 18 insertions(+), 10 deletions(-)
>>
>> diff --git a/Documentation/admin-guide/kdump/kdump.rst b/Documentation/admin-guide/kdump/kdump.rst
>> index 7587caadbae1..0bf2eb100a05 100644
>> --- a/Documentation/admin-guide/kdump/kdump.rst
>> +++ b/Documentation/admin-guide/kdump/kdump.rst
>> @@ -577,9 +577,10 @@ with /sys/kernel/config/crash_dm_crypt_keys for setup,
>>
>>  1. Tell the first kernel what logon keys are needed to unlock the disk volumes,
>>      # Add key #1
>> -    mkdir /sys/kernel/config/crash_dm_crypt_keys/7d26b7b4-e342-4d2d-b660-7426b0996720
>> +    VOL1_UUID=7d26b7b4-e342-4d2d-b660-7426b0996720
>> +    mkdir /sys/kernel/config/crash_dm_crypt_keys/$VOL1_UUID
>>      # Add key #1's description
>> -    echo cryptsetup:7d26b7b4-e342-4d2d-b660-7426b0996720 > /sys/kernel/config/crash_dm_crypt_keys/description
>> +    echo cryptsetup:$VOL1_UUID > /sys/kernel/config/crash_dm_crypt_keys/$VOL1_UUID/description
>>
>>      # how many keys do we have now?
>>      cat /sys/kernel/config/crash_dm_crypt_keys/count
>> @@ -591,15 +592,18 @@ with /sys/kernel/config/crash_dm_crypt_keys for setup,
>>      cat /sys/kernel/config/crash_dm_crypt_keys/count
>>      2
>>
>> -    # To support CPU/memory hot-plugging, reuse keys already saved to reserved
>> -    # memory
>> -    echo true > /sys/kernel/config/crash_dm_crypt_key/reuse
>> -
>>  2. Load the dump-capture kernel
>>
>>  3. After the dump-capture kerne get booted, restore the keys to user keyring
>
>                             kernel is booted,

Thanks for catching this typo! I'll apply your suggestion to next
version!

[...]

-- 
Best regards,
Coiby

Re: [PATCH v5 9/9] Documentation: kdump: Add arm64 and ppc64le to encrypted dump target support list

[Coiby Xu]

On Tue, Sep 08, 2026 at 10:48:11PM -0700, Randy Dunlap wrote:
>
>
>On 9/8/26 5:36 PM, Coiby Xu wrote:
>> The encrypted dump target support is now extended to arm64 and ppc64le.
>>
>> Fixes: e3a84be1ec2f ("arm64,ppc64le/kdump: pass dm-crypt keys to kdump kernel")
>> Reported-by: Sourabh Jain <sourabhjain@linux.ibm.com>
>> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
>> Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
>> ---
>>  Documentation/admin-guide/kdump/kdump.rst | 4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/admin-guide/kdump/kdump.rst b/Documentation/admin-guide/kdump/kdump.rst
>> index 0bf2eb100a05..36ad6125c670 100644
>> --- a/Documentation/admin-guide/kdump/kdump.rst
>> +++ b/Documentation/admin-guide/kdump/kdump.rst
>> @@ -572,8 +572,8 @@ Write the dump file to encrypted disk volume
>>  ============================================
>>
>>  CONFIG_CRASH_DM_CRYPT can be enabled to support saving the dump file to an
>> -encrypted disk volume (only x86_64 supported for now). User space can interact
>> -with /sys/kernel/config/crash_dm_crypt_keys for setup,
>> +encrypted disk volume (only x86_64, arm64, ppc64le supported for now). User
>> +space can interact with /sys/kernel/config/crash_dm_crypt_keys for setup,
>
>                                                                  for setup.

I'll apply the suggestion, thanks!

[...]

-- 
Best regards,
Coiby