* EDAC: skx_edac: add ACPI dependency
@ 2018-11-02 23:42 Borislav Petkov
0 siblings, 0 replies; 6+ messages in thread
From: Borislav Petkov @ 2018-11-02 23:42 UTC (permalink / raw)
To: Luck, Tony
Cc: Arnd Bergmann, Mauro Carvalho Chehab, Qiuxu Zhuo, linux-edac,
linux-kernel
On Fri, Nov 02, 2018 at 10:39:59AM -0700, Luck, Tony wrote:
> On Fri, Nov 02, 2018 at 05:10:13PM +0100, Borislav Petkov wrote:
> > On Fri, Nov 02, 2018 at 04:32:06PM +0100, Arnd Bergmann wrote:
> > > We cannot currently select ACPI_ADXL without also enabling the top-level
> > > ACPI option:
> > >
> > > WARNING: unmet direct dependencies detected for ACPI_ADXL
> > > Depends on [n]: ACPI [=n]
> > > Selected by [y]:
> > > - EDAC_SKX [=y] && EDAC [=y] && PCI [=y] && X86_64 [=y] && X86_MCE_INTEL [=y] && PCI_MMCONFIG [=y] && (ACPI_NFIT [=n] || !ACPI_NFIT [=n])
> >
> > That should fix the issue too:
> >
> > https://marc.info/?l=linux-acpi&m=154102117706500&w=2
>
> I have to say that Arnd's fix is prettier. With it, we can go back
> to
>
> select ACPI_ADXL
>
> instead of
>
> select ACPI_ADXL if ACPI
Arnd's fix already has that last line in there:
config EDAC_SKX
tristate "Intel Skylake server Integrated MC"
- depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG
+ depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI
depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_SKX can't be y
select DMI
select ACPI_ADXL if ACPI
^^^^^^^^^^^^^^^^^^^^^^^^
so I'm reading this as *additionally* needed, ontop of the ugly fix.
But let's wait until he clarifies first.
^ permalink raw reply [flat|nested] 6+ messages in thread* EDAC: skx_edac: add ACPI dependency
@ 2018-11-06 14:32 Borislav Petkov
0 siblings, 0 replies; 6+ messages in thread
From: Borislav Petkov @ 2018-11-06 14:32 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Tony Luck, Mauro Carvalho Chehab, qiuxu.zhuo, linux-edac,
Linux Kernel Mailing List
On Tue, Nov 06, 2018 at 02:44:42PM +0100, Arnd Bergmann wrote:
> No, it was unintentional, the 'if ACPI' can be dropped when we add
> 'depends on ACPI'.
So I have one fix already which takes care of non-sensical configs. If
you or Tony wanna make it prettier, feel free to test it thoroughly and
send me a patch ontop of
https://git.kernel.org/pub/scm/linux/kernel/git/bp/bp.git/log/?h=for-next
Thx.
^ permalink raw reply [flat|nested] 6+ messages in thread
* EDAC: skx_edac: add ACPI dependency
@ 2018-11-06 13:44 Arnd Bergmann
0 siblings, 0 replies; 6+ messages in thread
From: Arnd Bergmann @ 2018-11-06 13:44 UTC (permalink / raw)
To: Borislav Petkov
Cc: Tony Luck, Mauro Carvalho Chehab, qiuxu.zhuo, linux-edac,
Linux Kernel Mailing List
On Sat, Nov 3, 2018 at 12:42 AM Borislav Petkov <bp@alien8.de> wrote:
>
> On Fri, Nov 02, 2018 at 10:39:59AM -0700, Luck, Tony wrote:
> > On Fri, Nov 02, 2018 at 05:10:13PM +0100, Borislav Petkov wrote:
> > > On Fri, Nov 02, 2018 at 04:32:06PM +0100, Arnd Bergmann wrote:
> > > > We cannot currently select ACPI_ADXL without also enabling the top-level
> > I have to say that Arnd's fix is prettier. With it, we can go back
> > to
> >
> > select ACPI_ADXL
> >
> > instead of
> >
> > select ACPI_ADXL if ACPI
>
> Arnd's fix already has that last line in there:
>
> config EDAC_SKX
> tristate "Intel Skylake server Integrated MC"
> - depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG
> + depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI
> depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_SKX can't be y
> select DMI
> select ACPI_ADXL if ACPI
> ^^^^^^^^^^^^^^^^^^^^^^^^
>
> so I'm reading this as *additionally* needed, ontop of the ugly fix.
>
> But let's wait until he clarifies first.
No, it was unintentional, the 'if ACPI' can be dropped when we add
'depends on ACPI'.
Arnd
^ permalink raw reply [flat|nested] 6+ messages in thread* EDAC: skx_edac: add ACPI dependency
@ 2018-11-02 17:39 Luck, Tony
0 siblings, 0 replies; 6+ messages in thread
From: Luck, Tony @ 2018-11-02 17:39 UTC (permalink / raw)
To: Borislav Petkov
Cc: Arnd Bergmann, Mauro Carvalho Chehab, Qiuxu Zhuo, linux-edac,
linux-kernel
On Fri, Nov 02, 2018 at 05:10:13PM +0100, Borislav Petkov wrote:
> On Fri, Nov 02, 2018 at 04:32:06PM +0100, Arnd Bergmann wrote:
> > We cannot currently select ACPI_ADXL without also enabling the top-level
> > ACPI option:
> >
> > WARNING: unmet direct dependencies detected for ACPI_ADXL
> > Depends on [n]: ACPI [=n]
> > Selected by [y]:
> > - EDAC_SKX [=y] && EDAC [=y] && PCI [=y] && X86_64 [=y] && X86_MCE_INTEL [=y] && PCI_MMCONFIG [=y] && (ACPI_NFIT [=n] || !ACPI_NFIT [=n])
>
> That should fix the issue too:
>
> https://marc.info/?l=linux-acpi&m=154102117706500&w=2
I have to say that Arnd's fix is prettier. With it, we can go back
to
select ACPI_ADXL
instead of
select ACPI_ADXL if ACPI
-Tony
^ permalink raw reply [flat|nested] 6+ messages in thread
* EDAC: skx_edac: add ACPI dependency
@ 2018-11-02 16:10 Borislav Petkov
0 siblings, 0 replies; 6+ messages in thread
From: Borislav Petkov @ 2018-11-02 16:10 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Mauro Carvalho Chehab, Tony Luck, Qiuxu Zhuo, linux-edac,
linux-kernel
On Fri, Nov 02, 2018 at 04:32:06PM +0100, Arnd Bergmann wrote:
> We cannot currently select ACPI_ADXL without also enabling the top-level
> ACPI option:
>
> WARNING: unmet direct dependencies detected for ACPI_ADXL
> Depends on [n]: ACPI [=n]
> Selected by [y]:
> - EDAC_SKX [=y] && EDAC [=y] && PCI [=y] && X86_64 [=y] && X86_MCE_INTEL [=y] && PCI_MMCONFIG [=y] && (ACPI_NFIT [=n] || !ACPI_NFIT [=n])
That should fix the issue too:
https://marc.info/?l=linux-acpi&m=154102117706500&w=2
^ permalink raw reply [flat|nested] 6+ messages in thread
* EDAC: skx_edac: add ACPI dependency
@ 2018-11-02 15:32 Arnd Bergmann
0 siblings, 0 replies; 6+ messages in thread
From: Arnd Bergmann @ 2018-11-02 15:32 UTC (permalink / raw)
To: Borislav Petkov, Mauro Carvalho Chehab
Cc: Arnd Bergmann, Tony Luck, Qiuxu Zhuo, linux-edac, linux-kernel
We cannot currently select ACPI_ADXL without also enabling the top-level
ACPI option:
WARNING: unmet direct dependencies detected for ACPI_ADXL
Depends on [n]: ACPI [=n]
Selected by [y]:
- EDAC_SKX [=y] && EDAC [=y] && PCI [=y] && X86_64 [=y] && X86_MCE_INTEL [=y] && PCI_MMCONFIG [=y] && (ACPI_NFIT [=n] || !ACPI_NFIT [=n])
Add a corresponding dependency here.
Fixes: ad6e16059d8e ("EDAC, skx_edac: Add address translation for non-volatile DIMMs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/edac/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 41c9ccdd20d6..2397e1d2493a 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -231,7 +231,7 @@ config EDAC_SBRIDGE
config EDAC_SKX
tristate "Intel Skylake server Integrated MC"
- depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG
+ depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI
depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_SKX can't be y
select DMI
select ACPI_ADXL if ACPI
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-11-06 14:32 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-11-02 23:42 EDAC: skx_edac: add ACPI dependency Borislav Petkov
-- strict thread matches above, loose matches on Subject: below --
2018-11-06 14:32 Borislav Petkov
2018-11-06 13:44 Arnd Bergmann
2018-11-02 17:39 Luck, Tony
2018-11-02 16:10 Borislav Petkov
2018-11-02 15:32 Arnd Bergmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox