[PATCHv5 0/4] EDAC/altera: Address sashiko reviews part 1(v5)

[PATCHv5 0/4] EDAC/altera: Address sashiko reviews part 1(v5)

[Dinh Nguyen]

Hi EDAC maintainers,

This is version 5 of the patch series that addresses some of the sashiko
reviews for the Altera EDAC driver.

Here's what changed:

v5: Fix a missing } in patch 3/4

v4: Rebased the series to edac-urgent branch because of patch
9868f5c077df ("EDAC/altera: Use parent device for devres in 
altr_portb_setup()") will cause conflicts.

v3: simplified commit message based on Borislav's comments

v2: reworked to only includ true sashiko hits

Thanks,
Dinh

Dinh Nguyen (4):
  EDAC/altera: Do not allow driver unbinding
  EDAC/altera: Drop __init from ECC setup paths for re-probe safety
  EDAC/altera: Fix code leak on dci allocation failure
  EDAC/altera: Fix use-after-free in error paths

 drivers/edac/altera_edac.c | 60 ++++++++++++++++++--------------------
 1 file changed, 29 insertions(+), 31 deletions(-)

-- 
2.42.0.411.g813d9a9188

[PATCHv5 1/4] EDAC/altera: Do not allow driver unbinding

[Dinh Nguyen]

The EDAC driver must remain bound; unbinding and re-binding it would erase
active system memory.

Remove the .remove functions because they will not ever get used.

Fixes: 588cb03ea208 ("EDAC, altera: Add Arria10 L2 Cache ECC handling")
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v5: no changes
v4: rebased to edac-urgent
v3: simplify commit messsage
v2: reworked v1 to include only true sashiko hits
---
 drivers/edac/altera_edac.c | 25 ++++---------------------
 1 file changed, 4 insertions(+), 21 deletions(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 68846f583eeef..fe501c89dd0dc 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -453,15 +453,6 @@ static int altr_sdram_probe(struct platform_device *pdev)
 	return res;
 }
 
-static void altr_sdram_remove(struct platform_device *pdev)
-{
-	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
-
-	edac_mc_del_mc(&pdev->dev);
-	edac_mc_free(mci);
-	platform_set_drvdata(pdev, NULL);
-}
-
 /*
  * If you want to suspend, need to disable EDAC by removing it
  * from the device tree or defconfig.
@@ -481,13 +472,13 @@ static const struct dev_pm_ops altr_sdram_pm_ops = {
 
 static struct platform_driver altr_sdram_edac_driver = {
 	.probe = altr_sdram_probe,
-	.remove = altr_sdram_remove,
 	.driver = {
 		.name = "altr_sdram_edac",
 #ifdef CONFIG_PM
 		.pm = &altr_sdram_pm_ops,
 #endif
 		.of_match_table = altr_sdram_ctrl_of_match,
+		.suppress_bind_attrs = true,
 	},
 };
 
@@ -517,6 +508,7 @@ static struct platform_driver altr_edac_driver = {
 	.driver = {
 		.name = "socfpga_ecc_manager",
 		.of_match_table = altr_edac_of_match,
+		.suppress_bind_attrs = true,
 	},
 };
 module_platform_driver(altr_edac_driver);
@@ -803,22 +795,12 @@ static int altr_edac_device_probe(struct platform_device *pdev)
 	return res;
 }
 
-static void altr_edac_device_remove(struct platform_device *pdev)
-{
-	struct edac_device_ctl_info *dci = platform_get_drvdata(pdev);
-	struct altr_edac_device_dev *drvdata = dci->pvt_info;
-
-	debugfs_remove_recursive(drvdata->debugfs_dir);
-	edac_device_del_device(&pdev->dev);
-	edac_device_free_ctl_info(dci);
-}
-
 static struct platform_driver altr_edac_device_driver = {
 	.probe =  altr_edac_device_probe,
-	.remove = altr_edac_device_remove,
 	.driver = {
 		.name = "altr_edac_device",
 		.of_match_table = altr_edac_device_of_match,
+		.suppress_bind_attrs = true,
 	},
 };
 module_platform_driver(altr_edac_device_driver);
@@ -2214,6 +2196,7 @@ static struct platform_driver altr_edac_a10_driver = {
 	.driver = {
 		.name = "socfpga_a10_ecc_manager",
 		.of_match_table = altr_edac_a10_of_match,
+		.suppress_bind_attrs = true,
 	},
 };
 module_platform_driver(altr_edac_a10_driver);
-- 
2.42.0.411.g813d9a9188

[PATCHv5 2/4] EDAC/altera: Drop __init from ECC setup paths for re-probe safety

[Dinh Nguyen]

sashiko reports: Does suppressing sysfs unbinding fully prevent the
execution of freed __init memory? If altr_sysmgr_regmap_lookup_by_phandle()
returns -EPROBE_DEFER, the probe is deferred until after __init memory is
freed.

The a10 EDAC .setup callbacks (sdmmc, ethernet, nand, dma, usb, qspi)
and their helpers (altr_init_a10_ecc_device_type,
altr_init_a10_ecc_block) were marked __init. These run from the probe
path, which may execute after init memory is freed -- e.g. a probe
deferred via -EPROBE_DEFER that only succeeds once a late/module
dependency appears, or a manual unbind/rebind. Calling __init code then
dereferences freed memory. Remove __init so these functions remain
valid at runtime.

Assisted-by: Cursor:claude-4.8-opus
Fixes: 788586efd116 ("EDAC/altera: Initialize peripheral FIFOs in probe()")
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v4: rebased to edac-urgent
v3: no changes
v2: reworked v1 to include only true sashiko hits
---
 drivers/edac/altera_edac.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index fe501c89dd0dc..d8a3438fb5f44 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -926,7 +926,7 @@ static int __maybe_unused altr_init_memory_port(void __iomem *ioaddr, int port)
 	return ret;
 }
 
-static __init int __maybe_unused
+static int __maybe_unused
 altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
 			u32 ecc_ctrl_en_mask, bool dual_port)
 {
@@ -1001,7 +1001,7 @@ altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
 
 static int validate_parent_available(struct device_node *np);
 static const struct of_device_id altr_edac_a10_device_of_match[];
-static int __init __maybe_unused altr_init_a10_ecc_device_type(char *compat)
+static int __maybe_unused altr_init_a10_ecc_device_type(char *compat)
 {
 	int irq;
 	struct device_node *child, *np;
@@ -1330,7 +1330,7 @@ static const struct edac_device_prv_data a10_l2ecc_data = {
 
 #ifdef CONFIG_EDAC_ALTERA_ETHERNET
 
-static int __init socfpga_init_ethernet_ecc(struct altr_edac_device_dev *dev)
+static int socfpga_init_ethernet_ecc(struct altr_edac_device_dev *dev)
 {
 	int ret;
 
@@ -1360,7 +1360,7 @@ static const struct edac_device_prv_data a10_enetecc_data = {
 
 #ifdef CONFIG_EDAC_ALTERA_NAND
 
-static int __init socfpga_init_nand_ecc(struct altr_edac_device_dev *device)
+static int socfpga_init_nand_ecc(struct altr_edac_device_dev *device)
 {
 	int ret;
 
@@ -1390,7 +1390,7 @@ static const struct edac_device_prv_data a10_nandecc_data = {
 
 #ifdef CONFIG_EDAC_ALTERA_DMA
 
-static int __init socfpga_init_dma_ecc(struct altr_edac_device_dev *device)
+static int socfpga_init_dma_ecc(struct altr_edac_device_dev *device)
 {
 	int ret;
 
@@ -1420,7 +1420,7 @@ static const struct edac_device_prv_data a10_dmaecc_data = {
 
 #ifdef CONFIG_EDAC_ALTERA_USB
 
-static int __init socfpga_init_usb_ecc(struct altr_edac_device_dev *device)
+static int socfpga_init_usb_ecc(struct altr_edac_device_dev *device)
 {
 	int ret;
 
@@ -1450,7 +1450,7 @@ static const struct edac_device_prv_data a10_usbecc_data = {
 
 #ifdef CONFIG_EDAC_ALTERA_QSPI
 
-static int __init socfpga_init_qspi_ecc(struct altr_edac_device_dev *device)
+static int socfpga_init_qspi_ecc(struct altr_edac_device_dev *device)
 {
 	int ret;
 
@@ -1598,7 +1598,7 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 	return rc;
 }
 
-static int __init socfpga_init_sdmmc_ecc(struct altr_edac_device_dev *device)
+static int socfpga_init_sdmmc_ecc(struct altr_edac_device_dev *device)
 {
 	int rc = -ENODEV;
 	struct device_node *child;
-- 
2.42.0.411.g813d9a9188

[PATCHv5 3/4] EDAC/altera: Fix code leak on dci allocation failure

[Dinh Nguyen]

sashiko reports: If devres_open_group() fails, the function returns -ENOMEM
without freeing the dci structure allocated earlier with edac_device_alloc_ctl_info().

Free the dci structure if devres_open_group() fails.

Fixes: c3eea1942a16 ("EDAC, altera: Add Altera L2 cache and OCRAM support")
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v5: add missing } to fix build
v4: rebased to edac-urgent
v3: No changes
v2: reworked v1 to include only true sashiko hits
---
 drivers/edac/altera_edac.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index d8a3438fb5f44..ccdfb35178b69 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -1516,8 +1516,10 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 	altdev = dci->pvt_info;
 	*altdev = *device;
 
-	if (!devres_open_group(device->edac->dev, altr_portb_setup, GFP_KERNEL))
+	if (!devres_open_group(device->edac->dev, altr_portb_setup, GFP_KERNEL)) {
+		edac_device_free_ctl_info(dci);
 		return -ENOMEM;
+	}
 
 	/* Update PortB specific values */
 	altdev->edac_dev_name = ecc_name;
-- 
2.42.0.411.g813d9a9188

[PATCHv5 4/4] EDAC/altera: Fix use-after-free in error paths

[Dinh Nguyen]

In both altr_edac_a10_device_add() and altr_portb_setup(), the error path
freed the dci structure before releasing the devres group. Since the managed
single and double bit IRQ handlers use altdev(dci->pvt_info) as their data, an
IRQ firing between freeing dci and unregistering the IRQs could dereference
the freed memory.

Release the devres group first so the managed IRQs are unregistered
before the dci structure is freed.

Assisted-by: Cursor:claude-4.8-opus
Fixes: 911049845d70 ("EDAC, altera: Add Arria10 SD-MMC EDAC support")
Fixes: 588cb03ea208 ("EDAC, altera: Add Arria10 L2 Cache ECC handling")
Closes: https://sashiko.dev/#/patchset/20260719211238.589402-1-rosenp%40gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v5: No changes
v4: rebased to edac-urgent
v3: No changes
v2: reworked v1 to include only true sashiko hits
---
 drivers/edac/altera_edac.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index ccdfb35178b69..4c20fb9261608 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -1593,8 +1593,13 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 	return 0;
 
 err_release_group_1:
-	edac_device_free_ctl_info(dci);
+	/*
+	 * Release the devres group first so the managed IRQs are
+	 * unregistered before dci (which contains the IRQ handler's
+	 * data via dci->pvt_info) is freed, avoiding a use-after-free.
+	 */
 	devres_release_group(device->edac->dev, altr_portb_setup);
+	edac_device_free_ctl_info(dci);
 	edac_printk(KERN_ERR, EDAC_DEVICE,
 		    "%s:Error setting up EDAC device: %d\n", ecc_name, rc);
 	return rc;
@@ -1997,9 +2002,17 @@ static int altr_edac_a10_device_add(struct altr_arria10_edac *edac,
 	return 0;
 
 err_release_group1:
+	/*
+	 * Release the devres group first so the managed IRQs are
+	 * unregistered before dci (which contains the IRQ handler's
+	 * data via dci->pvt_info) is freed, avoiding a use-after-free.
+	 */
+	devres_release_group(edac->dev, NULL);
 	edac_device_free_ctl_info(dci);
+	goto err_print;
 err_release_group:
 	devres_release_group(edac->dev, NULL);
+err_print:
 	edac_printk(KERN_ERR, EDAC_DEVICE,
 		    "%s:Error setting up EDAC device: %d\n", ecc_name, rc);
 
-- 
2.42.0.411.g813d9a9188