Re: [RFC] Support different block names with same EDAC device

["Hawa, Hanna" <hhhawa@amazon.com>]

On 5/11/2020 5:26 PM, Borislav Petkov wrote:
> On Mon, May 11, 2020 at 05:21:14PM +0300, Hawa, Hanna wrote:
>> I'm trying to create different block names e.g. hw_block_a, hw_block_b.
> 
> Please give an actual example of the names you're trying to add and how
> the hierarchy you think should look like.

For example PCIe controller interface, that can report on different 
errors, e.g. axi read parity error, axi write parity error, completion 
timeout, write overflow error, and parity error.

Then I think the hierarchy should look:

pcie/pcie0/..
           /axi_write_parity_error/ce_count
                                  /ue_count
           /axi_read_parity_error/ce_count
                                 /ue_count
           /completion_timeout/ce_count
                              /ue_count
           /write_overflow_error/ce_count
                                /ue_count
           /parity_error/ce_count
                        /ue_count

same for pcie1/pcie2

Thanks,
Hanna

> 
> --
> Regards/Gruss,
>      Boris.
> 
> https://people.kernel.org/tglx/notes-about-netiquette
>