* [PATCHv3,3/3] arm64: dts: stratix10: Use new Stratix10 EDAC bindings
@ 2019-03-25 15:57 thor.thayer
0 siblings, 0 replies; 2+ messages in thread
From: thor.thayer @ 2019-03-25 15:57 UTC (permalink / raw)
To: bp, dinguyen, robh+dt, mark.rutland
Cc: mchehab, james.morse, thor.thayer, devicetree, linux-edac,
linux-kernel
From: Thor Thayer <thor.thayer@linux.intel.com>
Use the new Stratix10 binding format for EDAC nodes.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
---
v2-3 No change
---
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 25 ++++++++++++-----------
1 file changed, 13 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index e3f5eaa3657d..41109995563c 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -531,11 +531,12 @@
};
eccmgr {
- compatible = "altr,socfpga-a10-ecc-manager";
+ compatible = "altr,socfpga-s10-ecc-manager",
+ "altr,socfpga-a10-ecc-manager";
altr,sysmgr-syscon = <&sysmgr>;
#address-cells = <1>;
#size-cells = <1>;
- interrupts = <0 15 4>, <0 95 4>;
+ interrupts = <0 15 4>;
interrupt-controller;
#interrupt-cells = <2>;
ranges;
@@ -543,31 +544,31 @@
sdramedac {
compatible = "altr,sdram-edac-s10";
altr,sdr-syscon = <&sdr>;
- interrupts = <16 4>, <48 4>;
+ interrupts = <16 4>;
};
usb0-ecc@ff8c4000 {
- compatible = "altr,socfpga-usb-ecc";
+ compatible = "altr,socfpga-s10-usb-ecc",
+ "altr,socfpga-usb-ecc";
reg = <0xff8c4000 0x100>;
altr,ecc-parent = <&usb0>;
- interrupts = <2 4>,
- <34 4>;
+ interrupts = <2 4>;
};
emac0-rx-ecc@ff8c0000 {
- compatible = "altr,socfpga-eth-mac-ecc";
+ compatible = "altr,socfpga-s10-eth-mac-ecc",
+ "altr,socfpga-eth-mac-ecc";
reg = <0xff8c0000 0x100>;
altr,ecc-parent = <&gmac0>;
- interrupts = <4 4>,
- <36 4>;
+ interrupts = <4 4>;
};
emac0-tx-ecc@ff8c0400 {
- compatible = "altr,socfpga-eth-mac-ecc";
+ compatible = "altr,socfpga-s10-eth-mac-ecc",
+ "altr,socfpga-eth-mac-ecc";
reg = <0xff8c0400 0x100>;
altr,ecc-parent = <&gmac0>;
- interrupts = <5 4>,
- <37 4>;
+ interrupts = <5 4>;
};
};
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCHv3,3/3] arm64: dts: stratix10: Use new Stratix10 EDAC bindings
@ 2019-03-29 18:03 Dinh Nguyen
0 siblings, 0 replies; 2+ messages in thread
From: Dinh Nguyen @ 2019-03-29 18:03 UTC (permalink / raw)
To: thor.thayer, bp, robh+dt, mark.rutland
Cc: mchehab, james.morse, devicetree, linux-edac, linux-kernel
On 3/25/19 10:57 AM, thor.thayer@linux.intel.com wrote:
> From: Thor Thayer <thor.thayer@linux.intel.com>
>
> Use the new Stratix10 binding format for EDAC nodes.
>
> Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
> ---
> v2-3 No change
> ---
> arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 25 ++++++++++++-----------
> 1 file changed, 13 insertions(+), 12 deletions(-)
>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-03-29 18:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-03-29 18:03 [PATCHv3,3/3] arm64: dts: stratix10: Use new Stratix10 EDAC bindings Dinh Nguyen
-- strict thread matches above, loose matches on Subject: below --
2019-03-25 15:57 thor.thayer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox