From: Tyler Baicar <tbaicar-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: matt-mF/unelCI9GS6iBeEJttW/XRex20P6io@public.gmane.org,
ard.biesheuvel-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
will.deacon-5wv7dgnIgG8@public.gmane.org,
james.morse-5wv7dgnIgG8@public.gmane.org,
andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
linux-efi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Tyler Baicar <tbaicar-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Subject: [PATCH V2 1/2] efi: move ARM CPER code to new file
Date: Thu, 7 Dec 2017 14:25:26 -0500 [thread overview]
Message-ID: <1512674727-25770-2-git-send-email-tbaicar@codeaurora.org> (raw)
In-Reply-To: <1512674727-25770-1-git-send-email-tbaicar-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
The ARM CPER code is currently mixed in with the other CPER code. Move it
to a new file to separate it from the rest of the CPER code.
Signed-off-by: Tyler Baicar <tbaicar-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
---
drivers/firmware/efi/Kconfig | 5 ++
drivers/firmware/efi/Makefile | 1 +
drivers/firmware/efi/cper-arm.c | 147 ++++++++++++++++++++++++++++++++++++++++
drivers/firmware/efi/cper.c | 123 ---------------------------------
include/linux/cper.h | 9 +++
5 files changed, 162 insertions(+), 123 deletions(-)
create mode 100644 drivers/firmware/efi/cper-arm.c
diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig
index 2b4c39f..aab108e 100644
--- a/drivers/firmware/efi/Kconfig
+++ b/drivers/firmware/efi/Kconfig
@@ -166,6 +166,11 @@ endmenu
config UEFI_CPER
bool
+config UEFI_CPER_ARM
+ bool
+ depends on UEFI_CPER && ( ARM || ARM64 )
+ default y
+
config EFI_DEV_PATH_PARSER
bool
depends on ACPI
diff --git a/drivers/firmware/efi/Makefile b/drivers/firmware/efi/Makefile
index 269501d..a3e73d6 100644
--- a/drivers/firmware/efi/Makefile
+++ b/drivers/firmware/efi/Makefile
@@ -30,3 +30,4 @@ arm-obj-$(CONFIG_EFI) := arm-init.o arm-runtime.o
obj-$(CONFIG_ARM) += $(arm-obj-y)
obj-$(CONFIG_ARM64) += $(arm-obj-y)
obj-$(CONFIG_EFI_CAPSULE_LOADER) += capsule-loader.o
+obj-$(CONFIG_UEFI_CPER_ARM) += cper-arm.o
diff --git a/drivers/firmware/efi/cper-arm.c b/drivers/firmware/efi/cper-arm.c
new file mode 100644
index 0000000..1b56014
--- /dev/null
+++ b/drivers/firmware/efi/cper-arm.c
@@ -0,0 +1,147 @@
+/*
+ * UEFI Common Platform Error Record (CPER) support
+ *
+ * Copyright (C) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/time.h>
+#include <linux/cper.h>
+#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <linux/pci.h>
+#include <linux/aer.h>
+#include <linux/printk.h>
+#include <linux/bcd.h>
+#include <acpi/ghes.h>
+#include <ras/ras_event.h>
+
+#define INDENT_SP " "
+
+static const char * const arm_reg_ctx_strs[] = {
+ "AArch32 general purpose registers",
+ "AArch32 EL1 context registers",
+ "AArch32 EL2 context registers",
+ "AArch32 secure context registers",
+ "AArch64 general purpose registers",
+ "AArch64 EL1 context registers",
+ "AArch64 EL2 context registers",
+ "AArch64 EL3 context registers",
+ "Misc. system register structure",
+};
+
+void cper_print_proc_arm(const char *pfx,
+ const struct cper_sec_proc_arm *proc)
+{
+ int i, len, max_ctx_type;
+ struct cper_arm_err_info *err_info;
+ struct cper_arm_ctx_info *ctx_info;
+ char newpfx[64];
+
+ printk("%sMIDR: 0x%016llx\n", pfx, proc->midr);
+
+ len = proc->section_length - (sizeof(*proc) +
+ proc->err_info_num * (sizeof(*err_info)));
+ if (len < 0) {
+ printk("%ssection length: %d\n", pfx, proc->section_length);
+ printk("%ssection length is too small\n", pfx);
+ printk("%sfirmware-generated error record is incorrect\n", pfx);
+ printk("%sERR_INFO_NUM is %d\n", pfx, proc->err_info_num);
+ return;
+ }
+
+ if (proc->validation_bits & CPER_ARM_VALID_MPIDR)
+ printk("%sMultiprocessor Affinity Register (MPIDR): 0x%016llx\n",
+ pfx, proc->mpidr);
+
+ if (proc->validation_bits & CPER_ARM_VALID_AFFINITY_LEVEL)
+ printk("%serror affinity level: %d\n", pfx,
+ proc->affinity_level);
+
+ if (proc->validation_bits & CPER_ARM_VALID_RUNNING_STATE) {
+ printk("%srunning state: 0x%x\n", pfx, proc->running_state);
+ printk("%sPower State Coordination Interface state: %d\n",
+ pfx, proc->psci_state);
+ }
+
+ snprintf(newpfx, sizeof(newpfx), "%s%s", pfx, INDENT_SP);
+
+ err_info = (struct cper_arm_err_info *)(proc + 1);
+ for (i = 0; i < proc->err_info_num; i++) {
+ printk("%sError info structure %d:\n", pfx, i);
+
+ printk("%snum errors: %d\n", pfx, err_info->multiple_error + 1);
+
+ if (err_info->validation_bits & CPER_ARM_INFO_VALID_FLAGS) {
+ if (err_info->flags & CPER_ARM_INFO_FLAGS_FIRST)
+ printk("%sfirst error captured\n", newpfx);
+ if (err_info->flags & CPER_ARM_INFO_FLAGS_LAST)
+ printk("%slast error captured\n", newpfx);
+ if (err_info->flags & CPER_ARM_INFO_FLAGS_PROPAGATED)
+ printk("%spropagated error captured\n",
+ newpfx);
+ if (err_info->flags & CPER_ARM_INFO_FLAGS_OVERFLOW)
+ printk("%soverflow occurred, error info is incomplete\n",
+ newpfx);
+ }
+
+ printk("%serror_type: %d, %s\n", newpfx, err_info->type,
+ err_info->type < ARRAY_SIZE(proc_error_type_strs) ?
+ proc_error_type_strs[err_info->type] : "unknown");
+ if (err_info->validation_bits & CPER_ARM_INFO_VALID_ERR_INFO)
+ printk("%serror_info: 0x%016llx\n", newpfx,
+ err_info->error_info);
+ if (err_info->validation_bits & CPER_ARM_INFO_VALID_VIRT_ADDR)
+ printk("%svirtual fault address: 0x%016llx\n",
+ newpfx, err_info->virt_fault_addr);
+ if (err_info->validation_bits & CPER_ARM_INFO_VALID_PHYSICAL_ADDR)
+ printk("%sphysical fault address: 0x%016llx\n",
+ newpfx, err_info->physical_fault_addr);
+ err_info += 1;
+ }
+
+ ctx_info = (struct cper_arm_ctx_info *)err_info;
+ max_ctx_type = ARRAY_SIZE(arm_reg_ctx_strs) - 1;
+ for (i = 0; i < proc->context_info_num; i++) {
+ int size = sizeof(*ctx_info) + ctx_info->size;
+
+ printk("%sContext info structure %d:\n", pfx, i);
+ if (len < size) {
+ printk("%ssection length is too small\n", newpfx);
+ printk("%sfirmware-generated error record is incorrect\n", pfx);
+ return;
+ }
+ if (ctx_info->type > max_ctx_type) {
+ printk("%sInvalid context type: %d (max: %d)\n",
+ newpfx, ctx_info->type, max_ctx_type);
+ return;
+ }
+ printk("%sregister context type: %s\n", newpfx,
+ arm_reg_ctx_strs[ctx_info->type]);
+ print_hex_dump(newpfx, "", DUMP_PREFIX_OFFSET, 16, 4,
+ (ctx_info + 1), ctx_info->size, 0);
+ len -= size;
+ ctx_info = (struct cper_arm_ctx_info *)((long)ctx_info + size);
+ }
+
+ if (len > 0) {
+ printk("%sVendor specific error info has %u bytes:\n", pfx,
+ len);
+ print_hex_dump(newpfx, "", DUMP_PREFIX_OFFSET, 16, 4, ctx_info,
+ len, true);
+ }
+}
diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
index d2fcafc..86d51d6 100644
--- a/drivers/firmware/efi/cper.c
+++ b/drivers/firmware/efi/cper.c
@@ -122,13 +122,6 @@ void cper_print_bits(const char *pfx, unsigned int bits,
"ARM A64",
};
-static const char * const proc_error_type_strs[] = {
- "cache error",
- "TLB error",
- "bus error",
- "micro-architectural error",
-};
-
static const char * const proc_op_strs[] = {
"unknown or generic",
"data read",
@@ -188,122 +181,6 @@ static void cper_print_proc_generic(const char *pfx,
printk("%s""IP: 0x%016llx\n", pfx, proc->ip);
}
-#if defined(CONFIG_ARM64) || defined(CONFIG_ARM)
-static const char * const arm_reg_ctx_strs[] = {
- "AArch32 general purpose registers",
- "AArch32 EL1 context registers",
- "AArch32 EL2 context registers",
- "AArch32 secure context registers",
- "AArch64 general purpose registers",
- "AArch64 EL1 context registers",
- "AArch64 EL2 context registers",
- "AArch64 EL3 context registers",
- "Misc. system register structure",
-};
-
-static void cper_print_proc_arm(const char *pfx,
- const struct cper_sec_proc_arm *proc)
-{
- int i, len, max_ctx_type;
- struct cper_arm_err_info *err_info;
- struct cper_arm_ctx_info *ctx_info;
- char newpfx[64];
-
- printk("%sMIDR: 0x%016llx\n", pfx, proc->midr);
-
- len = proc->section_length - (sizeof(*proc) +
- proc->err_info_num * (sizeof(*err_info)));
- if (len < 0) {
- printk("%ssection length: %d\n", pfx, proc->section_length);
- printk("%ssection length is too small\n", pfx);
- printk("%sfirmware-generated error record is incorrect\n", pfx);
- printk("%sERR_INFO_NUM is %d\n", pfx, proc->err_info_num);
- return;
- }
-
- if (proc->validation_bits & CPER_ARM_VALID_MPIDR)
- printk("%sMultiprocessor Affinity Register (MPIDR): 0x%016llx\n",
- pfx, proc->mpidr);
-
- if (proc->validation_bits & CPER_ARM_VALID_AFFINITY_LEVEL)
- printk("%serror affinity level: %d\n", pfx,
- proc->affinity_level);
-
- if (proc->validation_bits & CPER_ARM_VALID_RUNNING_STATE) {
- printk("%srunning state: 0x%x\n", pfx, proc->running_state);
- printk("%sPower State Coordination Interface state: %d\n",
- pfx, proc->psci_state);
- }
-
- snprintf(newpfx, sizeof(newpfx), "%s%s", pfx, INDENT_SP);
-
- err_info = (struct cper_arm_err_info *)(proc + 1);
- for (i = 0; i < proc->err_info_num; i++) {
- printk("%sError info structure %d:\n", pfx, i);
-
- printk("%snum errors: %d\n", pfx, err_info->multiple_error + 1);
-
- if (err_info->validation_bits & CPER_ARM_INFO_VALID_FLAGS) {
- if (err_info->flags & CPER_ARM_INFO_FLAGS_FIRST)
- printk("%sfirst error captured\n", newpfx);
- if (err_info->flags & CPER_ARM_INFO_FLAGS_LAST)
- printk("%slast error captured\n", newpfx);
- if (err_info->flags & CPER_ARM_INFO_FLAGS_PROPAGATED)
- printk("%spropagated error captured\n",
- newpfx);
- if (err_info->flags & CPER_ARM_INFO_FLAGS_OVERFLOW)
- printk("%soverflow occurred, error info is incomplete\n",
- newpfx);
- }
-
- printk("%serror_type: %d, %s\n", newpfx, err_info->type,
- err_info->type < ARRAY_SIZE(proc_error_type_strs) ?
- proc_error_type_strs[err_info->type] : "unknown");
- if (err_info->validation_bits & CPER_ARM_INFO_VALID_ERR_INFO)
- printk("%serror_info: 0x%016llx\n", newpfx,
- err_info->error_info);
- if (err_info->validation_bits & CPER_ARM_INFO_VALID_VIRT_ADDR)
- printk("%svirtual fault address: 0x%016llx\n",
- newpfx, err_info->virt_fault_addr);
- if (err_info->validation_bits & CPER_ARM_INFO_VALID_PHYSICAL_ADDR)
- printk("%sphysical fault address: 0x%016llx\n",
- newpfx, err_info->physical_fault_addr);
- err_info += 1;
- }
-
- ctx_info = (struct cper_arm_ctx_info *)err_info;
- max_ctx_type = ARRAY_SIZE(arm_reg_ctx_strs) - 1;
- for (i = 0; i < proc->context_info_num; i++) {
- int size = sizeof(*ctx_info) + ctx_info->size;
-
- printk("%sContext info structure %d:\n", pfx, i);
- if (len < size) {
- printk("%ssection length is too small\n", newpfx);
- printk("%sfirmware-generated error record is incorrect\n", pfx);
- return;
- }
- if (ctx_info->type > max_ctx_type) {
- printk("%sInvalid context type: %d (max: %d)\n",
- newpfx, ctx_info->type, max_ctx_type);
- return;
- }
- printk("%sregister context type: %s\n", newpfx,
- arm_reg_ctx_strs[ctx_info->type]);
- print_hex_dump(newpfx, "", DUMP_PREFIX_OFFSET, 16, 4,
- (ctx_info + 1), ctx_info->size, 0);
- len -= size;
- ctx_info = (struct cper_arm_ctx_info *)((long)ctx_info + size);
- }
-
- if (len > 0) {
- printk("%sVendor specific error info has %u bytes:\n", pfx,
- len);
- print_hex_dump(newpfx, "", DUMP_PREFIX_OFFSET, 16, 4, ctx_info,
- len, true);
- }
-}
-#endif
-
static const char * const mem_err_type_strs[] = {
"unknown",
"no error",
diff --git a/include/linux/cper.h b/include/linux/cper.h
index 723e952..0a2d5c5 100644
--- a/include/linux/cper.h
+++ b/include/linux/cper.h
@@ -494,6 +494,13 @@ struct cper_sec_pcie {
/* Reset to default packing */
#pragma pack()
+static const char * const proc_error_type_strs[] = {
+ "cache error",
+ "TLB error",
+ "bus error",
+ "micro-architectural error",
+};
+
u64 cper_next_record_id(void);
const char *cper_severity_str(unsigned int);
const char *cper_mem_err_type_str(unsigned int);
@@ -503,5 +510,7 @@ void cper_mem_err_pack(const struct cper_sec_mem_err *,
struct cper_mem_err_compact *);
const char *cper_mem_err_unpack(struct trace_seq *,
struct cper_mem_err_compact *);
+void cper_print_proc_arm(const char *pfx,
+ const struct cper_sec_proc_arm *proc);
#endif
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2017-12-07 19:25 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-07 19:25 [PATCH V2 0/2] CPER ARM error information parsing Tyler Baicar
[not found] ` <1512674727-25770-1-git-send-email-tbaicar-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-12-07 19:25 ` Tyler Baicar [this message]
[not found] ` <1512674727-25770-2-git-send-email-tbaicar-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-12-07 19:38 ` [PATCH V2 1/2] efi: move ARM CPER code to new file Ard Biesheuvel
[not found] ` <CAKv+Gu_kM1NLWcOtQSEwEVnncBbrgJ5MP4VrYQVHBoCwSf_FRQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-07 20:07 ` Tyler Baicar
[not found] ` <972fe421-696b-cd26-9145-20081fb733c9-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-12-11 21:06 ` Tyler Baicar
[not found] ` <1bcd0462-5df9-fd90-c487-4e8958a9e27d-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-12-11 21:09 ` Ard Biesheuvel
[not found] ` <CAKv+Gu_VWjw6E0GHc1edLAc-NVjy6CtDU2fSR5o7-Q+W40Fbug-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-11 21:29 ` Tyler Baicar
[not found] ` <6c9da127-f210-3f14-32b7-c38ad5e0e1d6-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-12-11 23:17 ` Ard Biesheuvel
2017-12-07 19:25 ` [PATCH V2 2/2] efi: parse ARM error information value Tyler Baicar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1512674727-25770-2-git-send-email-tbaicar@codeaurora.org \
--to=tbaicar-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
--cc=andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=ard.biesheuvel-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=james.morse-5wv7dgnIgG8@public.gmane.org \
--cc=linux-efi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=matt-mF/unelCI9GS6iBeEJttW/XRex20P6io@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox