* [PATCH v1] efi/dev-path-parser: Switch to acpi_dev_get_first_match_dev()
@ 2020-05-22 14:17 Andy Shevchenko
2020-05-22 15:34 ` Ard Biesheuvel
0 siblings, 1 reply; 2+ messages in thread
From: Andy Shevchenko @ 2020-05-22 14:17 UTC (permalink / raw)
To: Ard Biesheuvel, linux-efi; +Cc: Andy Shevchenko
The acpi_dev_get_first_match_dev() helper will find and return
an ACPI device pointer of the first registered device in the system
by its HID and UID (if present). Use it instead of open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/firmware/efi/dev-path-parser.c | 41 ++++++++------------------
1 file changed, 12 insertions(+), 29 deletions(-)
diff --git a/drivers/firmware/efi/dev-path-parser.c b/drivers/firmware/efi/dev-path-parser.c
index 5c9625e552f4..9edd56f8d01c 100644
--- a/drivers/firmware/efi/dev-path-parser.c
+++ b/drivers/firmware/efi/dev-path-parser.c
@@ -12,51 +12,34 @@
#include <linux/efi.h>
#include <linux/pci.h>
-struct acpi_hid_uid {
- struct acpi_device_id hid[2];
- char uid[11]; /* UINT_MAX + null byte */
-};
-
-static int __init match_acpi_dev(struct device *dev, const void *data)
-{
- struct acpi_hid_uid hid_uid = *(const struct acpi_hid_uid *)data;
- struct acpi_device *adev = to_acpi_device(dev);
-
- if (acpi_match_device_ids(adev, hid_uid.hid))
- return 0;
-
- if (adev->pnp.unique_id)
- return !strcmp(adev->pnp.unique_id, hid_uid.uid);
- else
- return !strcmp("0", hid_uid.uid);
-}
-
static long __init parse_acpi_path(const struct efi_dev_path *node,
struct device *parent, struct device **child)
{
- struct acpi_hid_uid hid_uid = {};
+ char hid[3 + 4 + 1]; /* 3 characters + 4 hex digits + null byte */
+ char uid[10 + 1]; /* UINT_MAX + null byte */
+ struct acpi_device *adev;
struct device *phys_dev;
if (node->header.length != 12)
return -EINVAL;
- sprintf(hid_uid.hid[0].id, "%c%c%c%04X",
+ sprintf(hid, "%c%c%c%04X",
'A' + ((node->acpi.hid >> 10) & 0x1f) - 1,
'A' + ((node->acpi.hid >> 5) & 0x1f) - 1,
'A' + ((node->acpi.hid >> 0) & 0x1f) - 1,
node->acpi.hid >> 16);
- sprintf(hid_uid.uid, "%u", node->acpi.uid);
+ sprintf(uid, "%u", node->acpi.uid);
- *child = bus_find_device(&acpi_bus_type, NULL, &hid_uid,
- match_acpi_dev);
- if (!*child)
+ adev = acpi_dev_get_first_match_dev(hid, node->acpi.uid ? uid : NULL, -1);
+ if (!adev)
return -ENODEV;
- phys_dev = acpi_get_first_physical_node(to_acpi_device(*child));
+ phys_dev = acpi_get_first_physical_node(adev);
if (phys_dev) {
- get_device(phys_dev);
- put_device(*child);
- *child = phys_dev;
+ *child = get_device(phys_dev);
+ acpi_dev_put(adev);
+ } else {
+ *child = &adev->dev;
}
return 0;
--
2.26.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v1] efi/dev-path-parser: Switch to acpi_dev_get_first_match_dev()
2020-05-22 14:17 [PATCH v1] efi/dev-path-parser: Switch to acpi_dev_get_first_match_dev() Andy Shevchenko
@ 2020-05-22 15:34 ` Ard Biesheuvel
0 siblings, 0 replies; 2+ messages in thread
From: Ard Biesheuvel @ 2020-05-22 15:34 UTC (permalink / raw)
To: Andy Shevchenko, Lukas Wunner; +Cc: linux-efi
(+ Lukas)
On Fri, 22 May 2020 at 16:17, Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> The acpi_dev_get_first_match_dev() helper will find and return
> an ACPI device pointer of the first registered device in the system
> by its HID and UID (if present). Use it instead of open coded variant.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> drivers/firmware/efi/dev-path-parser.c | 41 ++++++++------------------
> 1 file changed, 12 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/firmware/efi/dev-path-parser.c b/drivers/firmware/efi/dev-path-parser.c
> index 5c9625e552f4..9edd56f8d01c 100644
> --- a/drivers/firmware/efi/dev-path-parser.c
> +++ b/drivers/firmware/efi/dev-path-parser.c
> @@ -12,51 +12,34 @@
> #include <linux/efi.h>
> #include <linux/pci.h>
>
> -struct acpi_hid_uid {
> - struct acpi_device_id hid[2];
> - char uid[11]; /* UINT_MAX + null byte */
> -};
> -
> -static int __init match_acpi_dev(struct device *dev, const void *data)
> -{
> - struct acpi_hid_uid hid_uid = *(const struct acpi_hid_uid *)data;
> - struct acpi_device *adev = to_acpi_device(dev);
> -
> - if (acpi_match_device_ids(adev, hid_uid.hid))
> - return 0;
> -
> - if (adev->pnp.unique_id)
> - return !strcmp(adev->pnp.unique_id, hid_uid.uid);
> - else
> - return !strcmp("0", hid_uid.uid);
> -}
> -
> static long __init parse_acpi_path(const struct efi_dev_path *node,
> struct device *parent, struct device **child)
> {
> - struct acpi_hid_uid hid_uid = {};
> + char hid[3 + 4 + 1]; /* 3 characters + 4 hex digits + null byte */
> + char uid[10 + 1]; /* UINT_MAX + null byte */
> + struct acpi_device *adev;
> struct device *phys_dev;
>
> if (node->header.length != 12)
> return -EINVAL;
>
> - sprintf(hid_uid.hid[0].id, "%c%c%c%04X",
> + sprintf(hid, "%c%c%c%04X",
> 'A' + ((node->acpi.hid >> 10) & 0x1f) - 1,
> 'A' + ((node->acpi.hid >> 5) & 0x1f) - 1,
> 'A' + ((node->acpi.hid >> 0) & 0x1f) - 1,
> node->acpi.hid >> 16);
> - sprintf(hid_uid.uid, "%u", node->acpi.uid);
> + sprintf(uid, "%u", node->acpi.uid);
>
> - *child = bus_find_device(&acpi_bus_type, NULL, &hid_uid,
> - match_acpi_dev);
> - if (!*child)
> + adev = acpi_dev_get_first_match_dev(hid, node->acpi.uid ? uid : NULL, -1);
> + if (!adev)
> return -ENODEV;
>
> - phys_dev = acpi_get_first_physical_node(to_acpi_device(*child));
> + phys_dev = acpi_get_first_physical_node(adev);
> if (phys_dev) {
> - get_device(phys_dev);
> - put_device(*child);
> - *child = phys_dev;
> + *child = get_device(phys_dev);
> + acpi_dev_put(adev);
> + } else {
> + *child = &adev->dev;
> }
>
> return 0;
> --
> 2.26.2
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-05-22 15:34 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-05-22 14:17 [PATCH v1] efi/dev-path-parser: Switch to acpi_dev_get_first_match_dev() Andy Shevchenko
2020-05-22 15:34 ` Ard Biesheuvel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox