From: Mingming <cmm@us.ibm.com>
To: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: linux-ext4@vger.kernel.org
Subject: Re: [PATCH] ext3: quota macros cleanup
Date: Tue, 08 Dec 2009 15:32:29 -0800 [thread overview]
Message-ID: <1260315149.4206.1520.camel@mingming-laptop> (raw)
In-Reply-To: <1260254781-18041-1-git-send-email-dmonakhov@openvz.org>
On Tue, 2009-12-08 at 09:46 +0300, Dmitry Monakhov wrote:
> Currently all quota block reservation macros contains hardcoded "2"
> aka MAXQUOTAS value. This is no good because in some places it is not
> obvious to understand what does this digit represent. Let's introduce
> new macro with self descriptive name.
>
> Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
> ---
> fs/ext3/inode.c | 8 ++++----
> fs/ext3/namei.c | 8 ++++----
> include/linux/ext3_jbd.h | 7 +++++--
> 3 files changed, 13 insertions(+), 10 deletions(-)
>
> diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
> index 354ed3b..1c99eba 100644
> --- a/fs/ext3/inode.c
> +++ b/fs/ext3/inode.c
> @@ -970,7 +970,7 @@ static int ext3_get_block(struct inode *inode, sector_t iblock,
> if (max_blocks > DIO_MAX_BLOCKS)
> max_blocks = DIO_MAX_BLOCKS;
> handle = ext3_journal_start(inode, DIO_CREDITS +
> - 2 * EXT3_QUOTA_TRANS_BLOCKS(inode->i_sb));
> + EXT3_ALL_QUOTAS_TRANS_BLOCKS(inode->i_sb));
> if (IS_ERR(handle)) {
> ret = PTR_ERR(handle);
> goto out;
> @@ -3136,8 +3136,8 @@ int ext3_setattr(struct dentry *dentry, struct iattr *attr)
>
> /* (user+group)*(old+new) structure, inode write (sb,
> * inode block, ? - but truncate inode update has it) */
> - handle = ext3_journal_start(inode, 2*(EXT3_QUOTA_INIT_BLOCKS(inode->i_sb)+
> - EXT3_QUOTA_DEL_BLOCKS(inode->i_sb))+3);
> + handle = ext3_journal_start(inode, EXT3_ALL_QUOTAS_INIT_BLOCKS(inode->i_sb)+
> + EXT3_QUOTA_DEL_BLOCKS(inode->i_sb)+3);
> if (IS_ERR(handle)) {
> error = PTR_ERR(handle);
> goto err_out;
> @@ -3229,7 +3229,7 @@ static int ext3_writepage_trans_blocks(struct inode *inode)
> #ifdef CONFIG_QUOTA
> /* We know that structure was already allocated during vfs_dq_init so
> * we will be updating only the data blocks + inodes */
> - ret += 2*EXT3_QUOTA_TRANS_BLOCKS(inode->i_sb);
> + ret += EXT3_ALL_QUOTAS_TRANS_BLOCKS(inode->i_sb);
> #endif
>
> return ret;
> diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
> index aad6400..5c1b676 100644
> --- a/fs/ext3/namei.c
> +++ b/fs/ext3/namei.c
> @@ -1699,7 +1699,7 @@ static int ext3_create (struct inode * dir, struct dentry * dentry, int mode,
> retry:
> handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) +
> EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 +
> - 2*EXT3_QUOTA_INIT_BLOCKS(dir->i_sb));
> + EXT3_ALL_QUOTAS_INIT_BLOCKS(dir->i_sb));
> if (IS_ERR(handle))
> return PTR_ERR(handle);
>
> @@ -1733,7 +1733,7 @@ static int ext3_mknod (struct inode * dir, struct dentry *dentry,
> retry:
> handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) +
> EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 +
> - 2*EXT3_QUOTA_INIT_BLOCKS(dir->i_sb));
> + EXT3_ALL_QUOTAS_INIT_BLOCKS(dir->i_sb));
> if (IS_ERR(handle))
> return PTR_ERR(handle);
>
> @@ -1769,7 +1769,7 @@ static int ext3_mkdir(struct inode * dir, struct dentry * dentry, int mode)
> retry:
> handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) +
> EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 +
> - 2*EXT3_QUOTA_INIT_BLOCKS(dir->i_sb));
> + EXT3_ALL_QUOTAS_INIT_BLOCKS(dir->i_sb));
> if (IS_ERR(handle))
> return PTR_ERR(handle);
>
> @@ -2175,7 +2175,7 @@ static int ext3_symlink (struct inode * dir,
> retry:
> handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) +
> EXT3_INDEX_EXTRA_TRANS_BLOCKS + 5 +
> - 2*EXT3_QUOTA_INIT_BLOCKS(dir->i_sb));
> + EXT3_ALL_QUOTAS_INIT_BLOCKS(dir->i_sb));
> if (IS_ERR(handle))
> return PTR_ERR(handle);
>
> diff --git a/include/linux/ext3_jbd.h b/include/linux/ext3_jbd.h
> index cf82d51..40dd8bd 100644
> --- a/include/linux/ext3_jbd.h
> +++ b/include/linux/ext3_jbd.h
> @@ -44,13 +44,13 @@
>
> #define EXT3_DATA_TRANS_BLOCKS(sb) (EXT3_SINGLEDATA_TRANS_BLOCKS + \
> EXT3_XATTR_TRANS_BLOCKS - 2 + \
> - 2*EXT3_QUOTA_TRANS_BLOCKS(sb))
> + EXT3_ALL_QUOTAS_TRANS_BLOCKS(sb))
>
> /* Delete operations potentially hit one directory's namespace plus an
> * entire inode, plus arbitrary amounts of bitmap/indirection data. Be
> * generous. We can grow the delete transaction later if necessary. */
>
> -#define EXT3_DELETE_TRANS_BLOCKS(sb) (2 * EXT3_DATA_TRANS_BLOCKS(sb) + 64)
> +#define EXT3_DELETE_TRANS_BLOCKS(sb) (EXT3_ALL_QUOTAS_TRANS_BLOCKS(sb) + 64)
>
> /* Define an arbitrary limit for the amount of data we will anticipate
> * writing to any given transaction. For unbounded transactions such as
> @@ -86,6 +86,9 @@
> #define EXT3_QUOTA_INIT_BLOCKS(sb) 0
> #define EXT3_QUOTA_DEL_BLOCKS(sb) 0
> #endif
> +#define EXT3_ALL_QUOTAS_TRANS_BLOCKS(sb) (MAXQUOTAS*EXT3_QUOTA_TRANS_BLOCKS(sb))
> +#define EXT3_ALL_QUOTAS_INIT_BLOCKS(sb) (MAXQUOTAS*EXT3_QUOTA_INIT_BLOCKS(sb))
> +#define EXT3_ALL_QUOTAS_DEL_BLOCKS(sb) (MAXQUOTAS*EXT3_QUOTA_DEL_BLOCKS(sb))
>
Any reason not to use the same micro name in the corresponding ext4
micros cleanup patch?
> int
> ext3_mark_iloc_dirty(handle_t *handle,
next prev parent reply other threads:[~2009-12-08 23:32 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-08 6:46 [PATCH] ext3: quota macros cleanup Dmitry Monakhov
2009-12-08 6:46 ` [PATCH] ext3: fix incorrect block reservation on quota transfer Dmitry Monakhov
2009-12-10 15:52 ` Jan Kara
2009-12-08 23:32 ` Mingming [this message]
2009-12-08 23:45 ` [PATCH] ext3: quota macros cleanup Dmitry Monakhov
2009-12-10 15:48 ` Jan Kara
2009-12-10 15:54 ` Jan Kara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1260315149.4206.1520.camel@mingming-laptop \
--to=cmm@us.ibm.com \
--cc=dmonakhov@openvz.org \
--cc=linux-ext4@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox