* streaming read and write - test results
@ 2008-06-23 17:36 Nick Dokos
2008-06-23 22:20 ` Andreas Dilger
2008-06-24 17:18 ` Solofo.Ramangalahy
0 siblings, 2 replies; 3+ messages in thread
From: Nick Dokos @ 2008-06-23 17:36 UTC (permalink / raw)
To: linux-ext4; +Cc: nicholas.dokos
Here are some preliminary results from streaming reads and writes
on ext4. The test rig consists of the following:
o an 8-cpu Opteron box (4 slots, dual-core) with 64GB of memory.
o 8 MSA1000 RAID controllers, each with four back-end SCSI busses, each
bus with 7 300GB 15K disks. Only one bus on each controller is used for
the tests below (the rest are going to be used for larger filesystem
testing). The 7 disks are striped ("horizontally" @ 128KB stripe size) at
the hardware level and exported as a single 2TB LUN (that's the current
hardware LUN size limit).
o the 8 LUNs are striped ("vertically" @ 128KB also) at the LVM level to
produce a 16TB logical volume.
o the kernels used were 2.6.26-rc3 and 2.6.26-rc5, each patched with the
then current ext4 patch queue.
o e2fsprogs were 1.41-WIP.
o the test used was aiod (http://sourceforge.net/projects/aiod/) with the
following command line:
aiod -S -B -b4M -I -v -w 3500000 -W|-R
(aiod uses AIO by default, but reverts back to ordinary read/write with -S
- note that the documentation calls this "sync-io" but that's a
misnomer: there is nothing synchronous about it, it just means non-AIO;
aiod uses directIO by default, but reverts to buffered IO with -B;
-b4M makes aiod issue 4MB IOs and -w <N> makes it issue that many IOs.)
The test first sequentially writes a ~14TB (4MB*3500000) file,
unmounts the fs, remounts it and then sequentially reads the file back.
o There were two write tests: in the first, the fs was mounted with default options;
in the second with mntopts=delalloc,journal_async_commit.
o The readahead setting was changed by doing a blockdev --setra on the LVM special
file, /dev/mapper/<vgname>-<lvname>. The default RA was 256.
-------------------------------------------------------------------------------
Throughput results (in MB/s):
Ext4 Read Read (RA=4K) Read (RA=64K) Write Write(+mntopts)
---- ---- ------------ ------------- ----- ---------------
2.6.26-rc3 122 144
2.6.26-rc5 117 509 [1] 570 295 [2]
281
Ext3 Read Write
---- ---- -----
2.6.26-rc3 131 155 [3]
Footnotes:
-----
[1] Typical iostat output:
avg-cpu: %user %nice %system %iowait %steal %idle
0.00 0.00 14.50 0.57 0.00 84.92
Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util
sda 56.04 0.00 449.05 0.00 129304.30 0.00 287.95 1.51 3.37 2.00 89.59
sde 61.14 0.00 443.96 0.00 129304.30 0.00 291.25 1.51 3.41 2.02 89.63
sdi 60.54 0.00 444.56 0.00 129304.30 0.00 290.86 1.50 3.38 2.02 89.71
sdm 61.14 0.00 443.96 0.00 129304.30 0.00 291.25 1.50 3.39 2.02 89.75
sdq 62.94 0.00 442.16 0.00 129304.30 0.00 292.44 1.49 3.36 2.03 89.67
sdu 64.24 0.00 440.86 0.00 129304.30 0.00 293.30 1.49 3.37 2.03 89.51
sdy 63.64 0.00 441.56 0.00 129304.30 0.00 292.84 1.49 3.37 2.03 89.83
sdac 61.84 0.00 443.36 0.00 129304.30 0.00 291.65 1.50 3.37 2.03 89.99
dm-0 0.00 0.00 2020.38 0.00 1034434.37 0.00 512.00 7.05 3.48 0.46 92.11
and top output (only %CPU > 0 shown):
top - 15:07:20 up 2 days, 20:08, 0 users, load average: 1.12, 1.38, 1.33
Tasks: 189 total, 1 running, 188 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.0%us, 13.1%sy, 0.0%ni, 84.8%id, 0.6%wa, 0.2%hi, 1.2%si, 0.0%st
Mem: 66114888k total, 66005660k used, 109228k free, 4196k buffers
Swap: 2040212k total, 3884k used, 2036328k free, 19773724k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
80046 root 20 0 18808 4796 564 S 86 0.0 186:21.78 aiod
391 root 15 -5 0 0 0 S 10 0.0 196:19.05 kswapd1
392 root 15 -5 0 0 0 S 8 0.0 178:58.83 kswapd2
393 root 15 -5 0 0 0 S 7 0.0 166:29.31 kswapd3
135 root 15 -5 0 0 0 S 1 0.0 1:06.74 kblockd/6
....
-----
[2] Two runs made: it's not clear why the difference is so large (~5%).
During both runs, iostat showed fairly constant and even spread among
the disks (sort-of: sda and sde form one group and the others form
another - the difference between the two groups stayed pretty constant
through the run). Here is a typical entry:
avg-cpu: %user %nice %system %iowait %steal %idle
0.00 0.00 13.01 2.65 0.00 84.34
Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util
sda 0.00 252.15 0.00 95.80 0.00 75623.58 789.36 0.29 3.04 3.01 28.81
sde 0.00 252.35 0.00 95.60 0.00 75623.58 791.01 0.29 3.07 2.98 28.53
sdi 0.00 185.61 0.00 162.24 0.00 75623.58 466.13 0.51 3.11 1.80 29.21
sdm 0.00 185.31 0.00 162.64 0.00 75623.58 464.98 0.50 3.05 1.77 28.73
sdq 0.00 187.71 0.00 162.54 0.00 75642.76 465.39 0.52 3.17 1.81 29.45
sdu 0.00 185.61 0.00 162.44 0.00 75624.38 465.56 0.51 3.12 1.79 29.09
sdy 0.00 188.41 2.50 167.73 19.98 75689.11 444.75 0.53 3.09 1.79 30.45
sdac 0.00 188.21 0.00 162.54 0.00 75645.95 465.41 0.52 3.21 1.81 29.37
dm-0 0.00 0.00 2.50 1622.18 19.98 604636.16 372.17 4.40 2.70 0.20 31.89
Typical top output looked like this (%CPU > 0 shown only):
top - 01:17:38 up 6:19, 0 users, load average: 1.38, 1.31, 1.23
Tasks: 189 total, 1 running, 188 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.0%us, 12.3%sy, 0.0%ni, 84.4%id, 2.6%wa, 0.1%hi, 0.6%si, 0.0%st
Mem: 66114888k total, 66006468k used, 108420k free, 137832k buffers
Swap: 2040212k total, 4120k used, 2036092k free, 39614736k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
9965 root 20 0 18808 4808 580 S 72 0.0 243:32.36 aiod
391 root 15 -5 0 0 0 S 8 0.0 28:23.96 kswapd1
392 root 15 -5 0 0 0 S 7 0.0 25:28.88 kswapd2
393 root 15 -5 0 0 0 S 7 0.0 23:53.41 kswapd3
9860 root 15 -5 0 0 0 S 2 0.0 6:20.61 kjournald2
....
-----
[3] File size in this case is only 2TB (ext3 limit).
During read, typical iostat output looked like this:
avg-cpu: %user %nice %system %iowait %steal %idle
0.00 0.00 3.80 10.81 0.00 85.39
Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util
sda 44.86 0.00 267.83 0.00 33553.65 0.00 125.28 0.35 1.31 1.07 28.73
sde 48.85 0.00 268.03 0.00 33528.07 0.00 125.09 0.36 1.33 1.04 27.85
sdi 23.58 0.00 262.04 0.00 33553.65 0.00 128.05 0.33 1.26 1.03 27.01
sdm 25.07 0.00 262.54 0.00 33553.65 0.00 127.81 0.33 1.24 1.04 27.29
sdq 46.45 0.00 266.63 0.00 33483.32 0.00 125.58 0.35 1.31 1.06 28.29
sdu 23.98 0.00 263.14 0.00 33554.45 0.00 127.52 0.36 1.36 1.07 28.13
sdy 44.76 0.00 267.73 0.00 33553.65 0.00 125.33 0.33 1.24 1.01 27.13
sdac 46.85 0.00 268.33 0.00 33553.65 0.00 125.05 0.32 1.19 0.99 26.57
dm-0 0.00 0.00 1427.57 0.00 268334.07 0.00 187.97 2.02 1.42 0.69 98.74
and typical top output:
top - 18:09:24 up 6:58, 0 users, load average: 1.11, 1.12, 1.04
Tasks: 196 total, 1 running, 195 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.0%us, 3.5%sy, 0.0%ni, 85.0%id, 11.0%wa, 0.0%hi, 0.4%si, 0.0%st
Mem: 66115496k total, 66007072k used, 108424k free, 79140k buffers
Swap: 2040212k total, 3524k used, 2036688k free, 44337588k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
10748 root 20 0 18808 4796 560 S 22 0.0 33:16.84 aiod
382 root 15 -5 0 0 0 S 2 0.0 13:49.95 kswapd1
383 root 15 -5 0 0 0 S 2 0.0 12:54.08 kswapd2
384 root 15 -5 0 0 0 S 2 0.0 12:03.61 kswapd3
...
During write, iostat looked like this:
avg-cpu: %user %nice %system %iowait %steal %idle
0.00 0.00 14.01 1.61 0.00 84.38
Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util
sda 0.00 4997.10 0.00 96.40 0.00 40747.25 422.67 0.57 5.92 3.45 33.25
sde 0.00 4995.10 0.00 98.30 0.00 40747.25 414.51 0.55 5.54 3.15 30.93
sdi 0.00 4996.20 0.00 97.60 0.00 40724.88 417.25 0.54 5.56 3.12 30.49
sdm 0.00 4996.60 0.00 96.60 0.00 40720.08 421.52 0.54 5.57 3.14 30.29
sdq 0.00 4987.21 1.30 97.90 10.39 40655.34 409.93 0.55 5.52 3.10 30.77
sdu 0.00 4997.80 0.00 97.50 0.00 40736.86 417.80 0.58 5.96 3.39 33.05
sdy 0.00 5035.46 0.00 58.04 0.00 40748.05 702.04 0.34 5.80 5.33 30.93
sdac 0.00 5032.87 0.00 57.84 0.00 40725.67 704.08 0.36 6.16 5.66 32.77
dm-0 0.00 0.00 1.30 40737.06 10.39 325896.50 8.00 237.23 5.75 0.01 38.96
and top looked like this:
top - 13:58:25 up 2:47, 1 user, load average: 1.40, 1.42, 1.37
Tasks: 200 total, 5 running, 195 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.0%us, 11.9%sy, 0.0%ni, 83.6%id, 2.2%wa, 0.0%hi, 2.4%si, 0.0%st
Mem: 66115496k total, 66004292k used, 111204k free, 146224k buffers
Swap: 2040212k total, 4212k used, 2036000k free, 43686528k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
9476 root 20 0 18808 4788 560 S 76 0.0 96:40.63 aiod
9373 root 15 -5 0 0 0 S 6 0.0 7:53.28 kjournald
382 root 15 -5 0 0 0 R 4 0.0 6:44.07 kswapd1
383 root 15 -5 0 0 0 R 4 0.0 6:08.69 kswapd2
384 root 15 -5 0 0 0 R 3 0.0 5:48.96 kswapd3
128 root 15 -5 0 0 0 S 1 0.0 0:39.71 kblockd/6
...
-------------------------------------------------------------------------------
I'll be filling in some of the holes in the table above (but move everything forward
to 2.6.26-rc7 plus the current patch queue). Note also that these are preliminary
results and the test rig is subject to change. If you have suggestions for
improvements, I'd be very interested in hearing them.
Thanks,
Nick
----
PS. One additional tidbit: I ran fsck on the ext4 filesystem - it took about an
hour and a half (I presume uninit_bg would speed that up substantially since
there are only a handful of inodes in use). But I got an interesting question
from it:
# time fsck.ext4 /dev/mapper/bigvg-bigvol
e2fsck 1.41-WIP (17-Jun-2008)
/dev/mapper/bigvg-bigvol primary superblock features different from backup, check forced.
Pass 1: Checking inodes, blocks, and sizes
Inode 49153, i_size is 14680064000000, should be 14680064000000. Fix<y>? y
yes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/mapper/bigvg-bigvol: ***** FILE SYSTEM WAS MODIFIED *****
/dev/mapper/bigvg-bigvol: 12/2050768896 files (8.3% non-contiguous), 3648395645/4101537792 blocks
real 197m45.245s
user 24m56.602s
sys 9m16.335s
The real time includes about 30 mins of waiting at the ? while I was not
looking, so it's not as bad as it looks. But why was there a question
since the reported sizes are the same? and why are the primary
superblock features different from backup?
Also, during pass1, every disk was being hit:
avg-cpu: %user %nice %system %iowait %steal %idle
1.79 0.00 1.70 9.72 0.00 86.79
Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util
sda 882.20 0.00 61.80 0.00 7552.00 0.00 122.20 0.29 4.64 4.27 26.36
sde 898.60 0.00 45.50 0.00 7552.00 0.00 165.98 0.26 5.78 4.84 22.00
sdi 880.10 0.00 63.90 0.00 7552.00 0.00 118.18 0.29 4.58 4.18 26.72
sdm 900.60 0.00 43.40 0.00 7552.00 0.00 174.01 0.25 5.73 4.87 21.12
sdq 1195.10 0.00 193.60 0.00 11101.60 0.00 57.34 0.69 3.56 2.07 40.00
sdu 1273.20 0.00 55.60 0.00 10630.40 0.00 191.19 0.30 5.45 5.00 27.80
sdy 880.70 0.00 63.90 0.00 7556.80 0.00 118.26 0.28 4.44 3.96 25.28
sdac 899.20 0.00 48.00 0.00 7577.60 0.00 157.87 0.26 5.49 4.57 21.92
dm-0 0.00 0.00 8385.60 0.00 67084.80 0.00 8.00 44.06 5.25 0.11 95.16
During pass5, only one disk was being hit:
avg-cpu: %user %nice %system %iowait %steal %idle
0.01 0.00 0.14 12.39 0.00 87.46
Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util
sda 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
sde 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
sdi 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
sdm 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
sdq 391.20 0.00 260.70 0.00 5212.80 0.00 20.00 1.00 3.99 3.83 99.76
sdu 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
sdy 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
sdac 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
dm-0 0.00 0.00 651.90 0.00 5215.20 0.00 8.00 2.66 4.14 1.53 99.72
Perhaps this indicates a less-than-optimal set-up of the storage?
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: streaming read and write - test results
2008-06-23 17:36 streaming read and write - test results Nick Dokos
@ 2008-06-23 22:20 ` Andreas Dilger
2008-06-24 17:18 ` Solofo.Ramangalahy
1 sibling, 0 replies; 3+ messages in thread
From: Andreas Dilger @ 2008-06-23 22:20 UTC (permalink / raw)
To: Nick Dokos; +Cc: linux-ext4
On Jun 23, 2008 13:36 -0400, Nick Dokos wrote:
> o 8 MSA1000 RAID controllers, each with four back-end SCSI busses, each
> bus with 7 300GB 15K disks. Only one bus on each controller is used for
> the tests below (the rest are going to be used for larger filesystem
> testing). The 7 disks are striped ("horizontally" @ 128KB stripe size) at
> the hardware level and exported as a single 2TB LUN (that's the current
> hardware LUN size limit).
>
> o the 8 LUNs are striped ("vertically" @ 128KB also) at the LVM level to
> produce a 16TB logical volume.
With 56 disks, I'd expect on the order of 2.5GB/s of throughput...
> o the test used was aiod (http://sourceforge.net/projects/aiod/) with the
> following command line:
>
> aiod -S -B -b4M -I -v -w 3500000 -W|-R
>
> (aiod uses AIO by default, but reverts back to ordinary read/write with -S
> - note that the documentation calls this "sync-io" but that's a
> misnomer: there is nothing synchronous about it, it just means non-AIO;
> aiod uses directIO by default, but reverts to buffered IO with -B;
> -b4M makes aiod issue 4MB IOs and -w <N> makes it issue that many IOs.)
>
> The test first sequentially writes a ~14TB (4MB*3500000) file,
> unmounts the fs, remounts it and then sequentially reads the file back.
At a guess you are consuming a lot of CPU in copy_from_user() because of
buffered IO instead of directIO. Is this a single-threaded write test?
In that case it is almost impossible to copy data fast enough from userspace
to saturate the back-end storage.
> top - 15:07:20 up 2 days, 20:08, 0 users, load average: 1.12, 1.38, 1.33
> Tasks: 189 total, 1 running, 188 sleeping, 0 stopped, 0 zombie
> Cpu(s): 0.0%us, 13.1%sy, 0.0%ni, 84.8%id, 0.6%wa, 0.2%hi, 1.2%si, 0.0%st
> Mem: 66114888k total, 66005660k used, 109228k free, 4196k buffers
> Swap: 2040212k total, 3884k used, 2036328k free, 19773724k cached
>
> PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
> 80046 root 20 0 18808 4796 564 S 86 0.0 186:21.78 aiod
> 391 root 15 -5 0 0 0 S 10 0.0 196:19.05 kswapd1
So this is pretty much pegging the single CPU, leaving 7 virtually idle...
If you enable the per-CPU top output (number '1') this would be clear,
instead of the misleading "13.15 system, 84.8% idle" shown above.
Try running 8 threads and measure the aggregate throughput. IOZONE will
do this, if aiod won't.
> PS. One additional tidbit: I ran fsck on the ext4 filesystem - it took about an
> hour and a half (I presume uninit_bg would speed that up substantially since
> there are only a handful of inodes in use). But I got an interesting question
> from it:
>
> # time fsck.ext4 /dev/mapper/bigvg-bigvol
> e2fsck 1.41-WIP (17-Jun-2008)
> /dev/mapper/bigvg-bigvol primary superblock features different from backup, check forced.
> Pass 1: Checking inodes, blocks, and sizes
> Inode 49153, i_size is 14680064000000, should be 14680064000000. Fix<y>? y
> yes
This is interesting. Can you add debugging to e2fsck to see what "bad_size"
is being used? I'm guessing it is just overflowing the ext2_max_sizes[]
array, and isn't taking the HUGE_FILE flag into account.
Cheers, Andreas
--
Andreas Dilger
Sr. Staff Engineer, Lustre Group
Sun Microsystems of Canada, Inc.
^ permalink raw reply [flat|nested] 3+ messages in thread
* streaming read and write - test results
2008-06-23 17:36 streaming read and write - test results Nick Dokos
2008-06-23 22:20 ` Andreas Dilger
@ 2008-06-24 17:18 ` Solofo.Ramangalahy
1 sibling, 0 replies; 3+ messages in thread
From: Solofo.Ramangalahy @ 2008-06-24 17:18 UTC (permalink / raw)
To: nicholas.dokos; +Cc: linux-ext4
Nick Dokos writes:
> If you have suggestions for
> improvements, I'd be very interested in hearing them.
[...]
> o 8 MSA1000 RAID controllers, each with four back-end SCSI busses, each
> bus with 7 300GB 15K disks. Only one bus on each controller is used for
> the tests below (the rest are going to be used for larger filesystem
> testing). The 7 disks are striped ("horizontally" @ 128KB stripe size) at
> the hardware level and exported as a single 2TB LUN (that's the current
> hardware LUN size limit).
You may want to test one LUN without filesystem,
for example with zcav from bonnie++
(http://www.coker.com.au/bonnie++/zcav/).
Then the 8 together.
This way you have some points of comparison (for ext4 as well as other
filesystems) at a lower level.
--
solofo
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-06-24 17:18 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-06-23 17:36 streaming read and write - test results Nick Dokos
2008-06-23 22:20 ` Andreas Dilger
2008-06-24 17:18 ` Solofo.Ramangalahy
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox