public inbox for linux-ext4@vger.kernel.org
 help / color / mirror / Atom feed
From: Jan Kara <jack@suse.cz>
To: Baokun Li <libaokun1@huawei.com>
Cc: linux-ext4@vger.kernel.org, tytso@mit.edu,
	adilger.kernel@dilger.ca, jack@suse.cz, ritesh.list@gmail.com,
	linux-kernel@vger.kernel.org, yi.zhang@huawei.com,
	yukuai3@huawei.com
Subject: Re: [PATCH v3 2/4] ext4: add helper to check quota inums
Date: Wed, 26 Oct 2022 11:38:18 +0200	[thread overview]
Message-ID: <20221026093818.cxnyr6h5ioxukgvf@quack3> (raw)
In-Reply-To: <20221026042310.3839669-3-libaokun1@huawei.com>

On Wed 26-10-22 12:23:08, Baokun Li wrote:
> Before quota is enabled, a check on the preset quota inums in
> ext4_super_block is added to prevent wrong quota inodes from being loaded.
> In addition, when the quota fails to be enabled, the quota type and quota
> inum are printed to facilitate fault locating.
> 
> Signed-off-by: Baokun Li <libaokun1@huawei.com>

Makes sense. Feel free to add:

Reviewed-by: Jan Kara <jack@suse.cz>

								Honza

> ---
>  fs/ext4/super.c | 28 +++++++++++++++++++++++++---
>  1 file changed, 25 insertions(+), 3 deletions(-)
> 
> diff --git a/fs/ext4/super.c b/fs/ext4/super.c
> index 34b78f380968..0b4060d52d63 100644
> --- a/fs/ext4/super.c
> +++ b/fs/ext4/super.c
> @@ -6885,6 +6885,20 @@ static int ext4_quota_on(struct super_block *sb, int type, int format_id,
>  	return err;
>  }
>  
> +static inline bool ext4_check_quota_inum(int type, unsigned long qf_inum)
> +{
> +	switch (type) {
> +	case USRQUOTA:
> +		return qf_inum == EXT4_USR_QUOTA_INO;
> +	case GRPQUOTA:
> +		return qf_inum == EXT4_GRP_QUOTA_INO;
> +	case PRJQUOTA:
> +		return qf_inum >= EXT4_GOOD_OLD_FIRST_INO;
> +	default:
> +		BUG();
> +	}
> +}
> +
>  static int ext4_quota_enable(struct super_block *sb, int type, int format_id,
>  			     unsigned int flags)
>  {
> @@ -6901,9 +6915,16 @@ static int ext4_quota_enable(struct super_block *sb, int type, int format_id,
>  	if (!qf_inums[type])
>  		return -EPERM;
>  
> +	if (!ext4_check_quota_inum(type, qf_inums[type])) {
> +		ext4_error(sb, "Bad quota inum: %lu, type: %d",
> +				qf_inums[type], type);
> +		return -EUCLEAN;
> +	}
> +
>  	qf_inode = ext4_iget(sb, qf_inums[type], EXT4_IGET_SPECIAL);
>  	if (IS_ERR(qf_inode)) {
> -		ext4_error(sb, "Bad quota inode # %lu", qf_inums[type]);
> +		ext4_error(sb, "Bad quota inode: %lu, type: %d",
> +				qf_inums[type], type);
>  		return PTR_ERR(qf_inode);
>  	}
>  
> @@ -6942,8 +6963,9 @@ int ext4_enable_quotas(struct super_block *sb)
>  			if (err) {
>  				ext4_warning(sb,
>  					"Failed to enable quota tracking "
> -					"(type=%d, err=%d). Please run "
> -					"e2fsck to fix.", type, err);
> +					"(type=%d, err=%d, ino=%lu). "
> +					"Please run e2fsck to fix.", type,
> +					err, qf_inums[type]);
>  				for (type--; type >= 0; type--) {
>  					struct inode *inode;
>  
> -- 
> 2.31.1
> 
-- 
Jan Kara <jack@suse.com>
SUSE Labs, CR

  reply	other threads:[~2022-10-26  9:39 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-26  4:23 [PATCH v3 0/4] ext4: fix two bug_on in __es_tree_search Baokun Li
2022-10-26  4:23 ` [PATCH v3 1/4] ext4: fix bug_on in __es_tree_search caused by bad quota inode Baokun Li
2022-10-26  9:36   ` Jan Kara
2022-10-26 13:56   ` Jason Yan
2022-10-26 18:33   ` Chaitanya Kulkarni
2022-10-26  4:23 ` [PATCH v3 2/4] ext4: add helper to check quota inums Baokun Li
2022-10-26  9:38   ` Jan Kara [this message]
2022-10-26 13:57   ` Jason Yan
2022-10-26  4:23 ` [PATCH v3 3/4] ext4: add EXT4_IGET_BAD flag to prevent unexpected bad inode Baokun Li
2022-10-26  9:41   ` Jan Kara
2022-10-26 13:59   ` Jason Yan
2022-10-26  4:23 ` [PATCH v3 4/4] ext4: fix bug_on in __es_tree_search caused by bad boot loader inode Baokun Li
2022-10-26 10:12   ` Jan Kara
2022-10-26 14:05   ` Jason Yan
2022-12-06 21:01 ` [PATCH v3 0/4] ext4: fix two bug_on in __es_tree_search Theodore Ts'o

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221026093818.cxnyr6h5ioxukgvf@quack3 \
    --to=jack@suse.cz \
    --cc=adilger.kernel@dilger.ca \
    --cc=libaokun1@huawei.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ritesh.list@gmail.com \
    --cc=tytso@mit.edu \
    --cc=yi.zhang@huawei.com \
    --cc=yukuai3@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox