From: John Garry <john.g.garry@oracle.com>
To: brauner@kernel.org, djwong@kernel.org, cem@kernel.org
Cc: linux-xfs@vger.kernel.org, linux-fsdevel@vger.kernel.org,
linux-kernel@vger.kernel.org, ojaswin@linux.ibm.com,
ritesh.list@gmail.com, martin.petersen@oracle.com, tytso@mit.edu,
linux-ext4@vger.kernel.org, John Garry <john.g.garry@oracle.com>
Subject: [PATCH v3 02/12] iomap: Rename IOMAP_ATOMIC -> IOMAP_ATOMIC_HW
Date: Thu, 27 Feb 2025 18:08:03 +0000 [thread overview]
Message-ID: <20250227180813.1553404-3-john.g.garry@oracle.com> (raw)
In-Reply-To: <20250227180813.1553404-1-john.g.garry@oracle.com>
In future xfs will support a SW-based atomic write, so rename
IOMAP_ATOMIC -> IOMAP_ATOMIC_HW to be clear which mode is being used.
Also relocate setting of IOMAP_ATOMIC_HW to the write path in
__iomap_dio_rw(), to be clear that this flag is only relevant to writes.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
---
Documentation/filesystems/iomap/operations.rst | 4 ++--
fs/ext4/inode.c | 2 +-
fs/iomap/direct-io.c | 18 +++++++++---------
fs/iomap/trace.h | 2 +-
include/linux/iomap.h | 2 +-
5 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/Documentation/filesystems/iomap/operations.rst b/Documentation/filesystems/iomap/operations.rst
index 2c7f5df9d8b0..82bfe0e8c08e 100644
--- a/Documentation/filesystems/iomap/operations.rst
+++ b/Documentation/filesystems/iomap/operations.rst
@@ -513,8 +513,8 @@ IOMAP_WRITE`` with any combination of the following enhancements:
if the mapping is unwritten and the filesystem cannot handle zeroing
the unaligned regions without exposing stale contents.
- * ``IOMAP_ATOMIC``: This write is being issued with torn-write
- protection.
+ * ``IOMAP_ATOMIC_HW``: This write is being issued with torn-write
+ protection based on HW-offload support.
Only a single bio can be created for the write, and the write must
not be split into multiple I/O requests, i.e. flag REQ_ATOMIC must be
set.
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 7c54ae5fcbd4..ba2f1e3db7c7 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3467,7 +3467,7 @@ static inline bool ext4_want_directio_fallback(unsigned flags, ssize_t written)
return false;
/* atomic writes are all-or-nothing */
- if (flags & IOMAP_ATOMIC)
+ if (flags & IOMAP_ATOMIC_HW)
return false;
/* can only try again if we wrote nothing */
diff --git a/fs/iomap/direct-io.c b/fs/iomap/direct-io.c
index b521eb15759e..f87c4277e738 100644
--- a/fs/iomap/direct-io.c
+++ b/fs/iomap/direct-io.c
@@ -271,7 +271,7 @@ static int iomap_dio_zero(const struct iomap_iter *iter, struct iomap_dio *dio,
* clearing the WRITE_THROUGH flag in the dio request.
*/
static inline blk_opf_t iomap_dio_bio_opflags(struct iomap_dio *dio,
- const struct iomap *iomap, bool use_fua, bool atomic)
+ const struct iomap *iomap, bool use_fua, bool atomic_hw)
{
blk_opf_t opflags = REQ_SYNC | REQ_IDLE;
@@ -283,7 +283,7 @@ static inline blk_opf_t iomap_dio_bio_opflags(struct iomap_dio *dio,
opflags |= REQ_FUA;
else
dio->flags &= ~IOMAP_DIO_WRITE_THROUGH;
- if (atomic)
+ if (atomic_hw)
opflags |= REQ_ATOMIC;
return opflags;
@@ -295,8 +295,8 @@ static loff_t iomap_dio_bio_iter(const struct iomap_iter *iter,
const struct iomap *iomap = &iter->iomap;
struct inode *inode = iter->inode;
unsigned int fs_block_size = i_blocksize(inode), pad;
+ bool atomic_hw = iter->flags & IOMAP_ATOMIC_HW;
const loff_t length = iomap_length(iter);
- bool atomic = iter->flags & IOMAP_ATOMIC;
loff_t pos = iter->pos;
blk_opf_t bio_opf;
struct bio *bio;
@@ -306,7 +306,7 @@ static loff_t iomap_dio_bio_iter(const struct iomap_iter *iter,
size_t copied = 0;
size_t orig_count;
- if (atomic && length != fs_block_size)
+ if (atomic_hw && length != fs_block_size)
return -EINVAL;
if ((pos | length) & (bdev_logical_block_size(iomap->bdev) - 1) ||
@@ -383,7 +383,7 @@ static loff_t iomap_dio_bio_iter(const struct iomap_iter *iter,
goto out;
}
- bio_opf = iomap_dio_bio_opflags(dio, iomap, use_fua, atomic);
+ bio_opf = iomap_dio_bio_opflags(dio, iomap, use_fua, atomic_hw);
nr_pages = bio_iov_vecs_to_alloc(dio->submit.iter, BIO_MAX_VECS);
do {
@@ -416,7 +416,7 @@ static loff_t iomap_dio_bio_iter(const struct iomap_iter *iter,
}
n = bio->bi_iter.bi_size;
- if (WARN_ON_ONCE(atomic && n != length)) {
+ if (WARN_ON_ONCE(atomic_hw && n != length)) {
/*
* This bio should have covered the complete length,
* which it doesn't, so error. We may need to zero out
@@ -610,9 +610,6 @@ __iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter,
if (iocb->ki_flags & IOCB_NOWAIT)
iomi.flags |= IOMAP_NOWAIT;
- if (iocb->ki_flags & IOCB_ATOMIC)
- iomi.flags |= IOMAP_ATOMIC;
-
if (iov_iter_rw(iter) == READ) {
/* reads can always complete inline */
dio->flags |= IOMAP_DIO_INLINE_COMP;
@@ -647,6 +644,9 @@ __iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter,
iomi.flags |= IOMAP_OVERWRITE_ONLY;
}
+ if (iocb->ki_flags & IOCB_ATOMIC)
+ iomi.flags |= IOMAP_ATOMIC_HW;
+
/* for data sync or sync, we need sync completion processing */
if (iocb_is_dsync(iocb)) {
dio->flags |= IOMAP_DIO_NEED_SYNC;
diff --git a/fs/iomap/trace.h b/fs/iomap/trace.h
index 4118a42cdab0..0c73d91c0485 100644
--- a/fs/iomap/trace.h
+++ b/fs/iomap/trace.h
@@ -99,7 +99,7 @@ DEFINE_RANGE_EVENT(iomap_dio_rw_queued);
{ IOMAP_FAULT, "FAULT" }, \
{ IOMAP_DIRECT, "DIRECT" }, \
{ IOMAP_NOWAIT, "NOWAIT" }, \
- { IOMAP_ATOMIC, "ATOMIC" }
+ { IOMAP_ATOMIC_HW, "ATOMIC_HW" }
#define IOMAP_F_FLAGS_STRINGS \
{ IOMAP_F_NEW, "NEW" }, \
diff --git a/include/linux/iomap.h b/include/linux/iomap.h
index 75bf54e76f3b..e7aa05503763 100644
--- a/include/linux/iomap.h
+++ b/include/linux/iomap.h
@@ -182,7 +182,7 @@ struct iomap_folio_ops {
#else
#define IOMAP_DAX 0
#endif /* CONFIG_FS_DAX */
-#define IOMAP_ATOMIC (1 << 9)
+#define IOMAP_ATOMIC_HW (1 << 9) /* HW-based torn-write protection */
struct iomap_ops {
/*
--
2.31.1
next prev parent reply other threads:[~2025-02-27 18:16 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-27 18:08 [PATCH v3 00/12] large atomic writes for xfs with CoW John Garry
2025-02-27 18:08 ` [PATCH v3 01/12] xfs: Pass flags to xfs_reflink_allocate_cow() John Garry
2025-02-28 1:19 ` Darrick J. Wong
2025-02-27 18:08 ` John Garry [this message]
2025-02-27 18:08 ` [PATCH v3 03/12] xfs: Switch atomic write size check in xfs_file_write_iter() John Garry
2025-02-27 18:08 ` [PATCH v3 04/12] xfs: Refactor xfs_reflink_end_cow_extent() John Garry
2025-02-27 18:08 ` [PATCH v3 05/12] iomap: Support SW-based atomic writes John Garry
2025-02-28 1:08 ` Darrick J. Wong
2025-02-27 18:08 ` [PATCH v3 06/12] iomap: Lift blocksize restriction on " John Garry
2025-02-27 18:08 ` [PATCH v3 07/12] xfs: Reflink CoW-based atomic write support John Garry
2025-02-27 18:08 ` [PATCH v3 08/12] xfs: Iomap SW-based " John Garry
2025-02-28 1:19 ` Darrick J. Wong
2025-03-01 19:44 ` kernel test robot
2025-02-27 18:08 ` [PATCH v3 09/12] xfs: Add xfs_file_dio_write_atomic() John Garry
2025-02-28 1:19 ` Darrick J. Wong
2025-02-28 7:45 ` John Garry
2025-02-28 15:39 ` Darrick J. Wong
2025-03-03 13:45 ` John Garry
2025-02-27 18:08 ` [PATCH v3 10/12] xfs: Commit CoW-based atomic writes atomically John Garry
2025-02-28 1:13 ` Darrick J. Wong
2025-02-27 18:08 ` [PATCH v3 11/12] xfs: Update atomic write max size John Garry
2025-02-27 18:08 ` [PATCH v3 12/12] xfs: Allow block allocator to take an alignment hint John Garry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250227180813.1553404-3-john.g.garry@oracle.com \
--to=john.g.garry@oracle.com \
--cc=brauner@kernel.org \
--cc=cem@kernel.org \
--cc=djwong@kernel.org \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-xfs@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=ojaswin@linux.ibm.com \
--cc=ritesh.list@gmail.com \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox