* [PATCH v3 7/8] video: exynos_dp: Move hotplug into a workqueue
@ 2012-11-01 10:24 Jingoo Han
2012-11-01 10:28 ` Jingoo Han
0 siblings, 1 reply; 2+ messages in thread
From: Jingoo Han @ 2012-11-01 10:24 UTC (permalink / raw)
To: linux-fbdev
Move the hotplug related code from probe and resume into a workqueue.
This allows us to initialize the DP driver (and resume it) when there
is no monitor connected.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Olof Johansson <olofj@chromium.org>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
drivers/video/exynos/exynos_dp_core.c | 93 +++++++++++++++++---------------
drivers/video/exynos/exynos_dp_core.h | 1 +
2 files changed, 50 insertions(+), 44 deletions(-)
diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
index c2b6bf2..ffb6d6d 100644
--- a/drivers/video/exynos/exynos_dp_core.c
+++ b/drivers/video/exynos/exynos_dp_core.c
@@ -874,6 +874,45 @@ static irqreturn_t exynos_dp_irq_handler(int irq, void *arg)
return IRQ_HANDLED;
}
+static void exynos_dp_hotplug(struct work_struct *work)
+{
+ struct exynos_dp_device *dp;
+ int ret;
+
+ dp = container_of(work, struct exynos_dp_device, hotplug_work);
+
+ ret = exynos_dp_detect_hpd(dp);
+ if (ret) {
+ dev_err(dp->dev, "unable to detect hpd\n");
+ return;
+ }
+
+ ret = exynos_dp_handle_edid(dp);
+ if (ret) {
+ dev_err(dp->dev, "unable to handle edid\n");
+ return;
+ }
+
+ ret = exynos_dp_set_link_train(dp, dp->video_info->lane_count,
+ dp->video_info->link_rate);
+ if (ret) {
+ dev_err(dp->dev, "unable to do link train\n");
+ return;
+ }
+
+ exynos_dp_enable_scramble(dp, 1);
+ exynos_dp_enable_rx_to_enhanced_mode(dp, 1);
+ exynos_dp_enable_enhanced_mode(dp, 1);
+
+ exynos_dp_set_lane_count(dp, dp->video_info->lane_count);
+ exynos_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
+
+ exynos_dp_init_video(dp);
+ ret = exynos_dp_config_video(dp, dp->video_info);
+ if (ret)
+ dev_err(dp->dev, "unable to config video\n");
+}
+
static int __devinit exynos_dp_probe(struct platform_device *pdev)
{
struct resource *res;
@@ -919,6 +958,8 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
return -ENODEV;
}
+ INIT_WORK(&dp->hotplug_work, exynos_dp_hotplug);
+
ret = devm_request_irq(&pdev->dev, dp->irq, exynos_dp_irq_handler, 0,
"exynos-dp", dp);
if (ret) {
@@ -932,36 +973,8 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
exynos_dp_init_dp(dp);
- ret = exynos_dp_detect_hpd(dp);
- if (ret) {
- dev_err(&pdev->dev, "unable to detect hpd\n");
- return ret;
- }
-
- exynos_dp_handle_edid(dp);
-
- ret = exynos_dp_set_link_train(dp, dp->video_info->lane_count,
- dp->video_info->link_rate);
- if (ret) {
- dev_err(&pdev->dev, "unable to do link train\n");
- return ret;
- }
-
- exynos_dp_enable_scramble(dp, 1);
- exynos_dp_enable_rx_to_enhanced_mode(dp, 1);
- exynos_dp_enable_enhanced_mode(dp, 1);
-
- exynos_dp_set_lane_count(dp, dp->video_info->lane_count);
- exynos_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
-
- exynos_dp_init_video(dp);
- ret = exynos_dp_config_video(dp, dp->video_info);
- if (ret) {
- dev_err(&pdev->dev, "unable to config video\n");
- return ret;
- }
-
platform_set_drvdata(pdev, dp);
+ schedule_work(&dp->hotplug_work);
return 0;
}
@@ -971,6 +984,9 @@ static int __devexit exynos_dp_remove(struct platform_device *pdev)
struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
struct exynos_dp_device *dp = platform_get_drvdata(pdev);
+ if (work_pending(&dp->hotplug_work))
+ flush_work(&dp->hotplug_work);
+
if (pdata && pdata->phy_exit)
pdata->phy_exit();
@@ -986,6 +1002,9 @@ static int exynos_dp_suspend(struct device *dev)
struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
struct exynos_dp_device *dp = platform_get_drvdata(pdev);
+ if (work_pending(&dp->hotplug_work))
+ flush_work(&dp->hotplug_work);
+
if (pdata && pdata->phy_exit)
pdata->phy_exit();
@@ -1007,21 +1026,7 @@ static int exynos_dp_resume(struct device *dev)
exynos_dp_init_dp(dp);
- exynos_dp_detect_hpd(dp);
- exynos_dp_handle_edid(dp);
-
- exynos_dp_set_link_train(dp, dp->video_info->lane_count,
- dp->video_info->link_rate);
-
- exynos_dp_enable_scramble(dp, 1);
- exynos_dp_enable_rx_to_enhanced_mode(dp, 1);
- exynos_dp_enable_enhanced_mode(dp, 1);
-
- exynos_dp_set_lane_count(dp, dp->video_info->lane_count);
- exynos_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
-
- exynos_dp_init_video(dp);
- exynos_dp_config_video(dp, dp->video_info);
+ schedule_work(&dp->hotplug_work);
return 0;
}
diff --git a/drivers/video/exynos/exynos_dp_core.h b/drivers/video/exynos/exynos_dp_core.h
index 57b8a65..66f11f4 100644
--- a/drivers/video/exynos/exynos_dp_core.h
+++ b/drivers/video/exynos/exynos_dp_core.h
@@ -32,6 +32,7 @@ struct exynos_dp_device {
struct video_info *video_info;
struct link_train link_train;
+ struct work_struct hotplug_work;
};
/* exynos_dp_reg.c */
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH v3 7/8] video: exynos_dp: Move hotplug into a workqueue
2012-11-01 10:24 [PATCH v3 7/8] video: exynos_dp: Move hotplug into a workqueue Jingoo Han
@ 2012-11-01 10:28 ` Jingoo Han
0 siblings, 0 replies; 2+ messages in thread
From: Jingoo Han @ 2012-11-01 10:28 UTC (permalink / raw)
To: linux-fbdev
From: Sean Paul <seanpaul@chromium.org>
Move the hotplug related code from probe and resume into a workqueue.
This allows us to initialize the DP driver (and resume it) when there
is no monitor connected.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Olof Johansson <olofj@chromium.org>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
Add 'From: Sean Paul <seanpaul@chromium.org>'
drivers/video/exynos/exynos_dp_core.c | 93 +++++++++++++++++---------------
drivers/video/exynos/exynos_dp_core.h | 1 +
2 files changed, 50 insertions(+), 44 deletions(-)
diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
index c2b6bf2..ffb6d6d 100644
--- a/drivers/video/exynos/exynos_dp_core.c
+++ b/drivers/video/exynos/exynos_dp_core.c
@@ -874,6 +874,45 @@ static irqreturn_t exynos_dp_irq_handler(int irq, void *arg)
return IRQ_HANDLED;
}
+static void exynos_dp_hotplug(struct work_struct *work)
+{
+ struct exynos_dp_device *dp;
+ int ret;
+
+ dp = container_of(work, struct exynos_dp_device, hotplug_work);
+
+ ret = exynos_dp_detect_hpd(dp);
+ if (ret) {
+ dev_err(dp->dev, "unable to detect hpd\n");
+ return;
+ }
+
+ ret = exynos_dp_handle_edid(dp);
+ if (ret) {
+ dev_err(dp->dev, "unable to handle edid\n");
+ return;
+ }
+
+ ret = exynos_dp_set_link_train(dp, dp->video_info->lane_count,
+ dp->video_info->link_rate);
+ if (ret) {
+ dev_err(dp->dev, "unable to do link train\n");
+ return;
+ }
+
+ exynos_dp_enable_scramble(dp, 1);
+ exynos_dp_enable_rx_to_enhanced_mode(dp, 1);
+ exynos_dp_enable_enhanced_mode(dp, 1);
+
+ exynos_dp_set_lane_count(dp, dp->video_info->lane_count);
+ exynos_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
+
+ exynos_dp_init_video(dp);
+ ret = exynos_dp_config_video(dp, dp->video_info);
+ if (ret)
+ dev_err(dp->dev, "unable to config video\n");
+}
+
static int __devinit exynos_dp_probe(struct platform_device *pdev)
{
struct resource *res;
@@ -919,6 +958,8 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
return -ENODEV;
}
+ INIT_WORK(&dp->hotplug_work, exynos_dp_hotplug);
+
ret = devm_request_irq(&pdev->dev, dp->irq, exynos_dp_irq_handler, 0,
"exynos-dp", dp);
if (ret) {
@@ -932,36 +973,8 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
exynos_dp_init_dp(dp);
- ret = exynos_dp_detect_hpd(dp);
- if (ret) {
- dev_err(&pdev->dev, "unable to detect hpd\n");
- return ret;
- }
-
- exynos_dp_handle_edid(dp);
-
- ret = exynos_dp_set_link_train(dp, dp->video_info->lane_count,
- dp->video_info->link_rate);
- if (ret) {
- dev_err(&pdev->dev, "unable to do link train\n");
- return ret;
- }
-
- exynos_dp_enable_scramble(dp, 1);
- exynos_dp_enable_rx_to_enhanced_mode(dp, 1);
- exynos_dp_enable_enhanced_mode(dp, 1);
-
- exynos_dp_set_lane_count(dp, dp->video_info->lane_count);
- exynos_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
-
- exynos_dp_init_video(dp);
- ret = exynos_dp_config_video(dp, dp->video_info);
- if (ret) {
- dev_err(&pdev->dev, "unable to config video\n");
- return ret;
- }
-
platform_set_drvdata(pdev, dp);
+ schedule_work(&dp->hotplug_work);
return 0;
}
@@ -971,6 +984,9 @@ static int __devexit exynos_dp_remove(struct platform_device *pdev)
struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
struct exynos_dp_device *dp = platform_get_drvdata(pdev);
+ if (work_pending(&dp->hotplug_work))
+ flush_work(&dp->hotplug_work);
+
if (pdata && pdata->phy_exit)
pdata->phy_exit();
@@ -986,6 +1002,9 @@ static int exynos_dp_suspend(struct device *dev)
struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
struct exynos_dp_device *dp = platform_get_drvdata(pdev);
+ if (work_pending(&dp->hotplug_work))
+ flush_work(&dp->hotplug_work);
+
if (pdata && pdata->phy_exit)
pdata->phy_exit();
@@ -1007,21 +1026,7 @@ static int exynos_dp_resume(struct device *dev)
exynos_dp_init_dp(dp);
- exynos_dp_detect_hpd(dp);
- exynos_dp_handle_edid(dp);
-
- exynos_dp_set_link_train(dp, dp->video_info->lane_count,
- dp->video_info->link_rate);
-
- exynos_dp_enable_scramble(dp, 1);
- exynos_dp_enable_rx_to_enhanced_mode(dp, 1);
- exynos_dp_enable_enhanced_mode(dp, 1);
-
- exynos_dp_set_lane_count(dp, dp->video_info->lane_count);
- exynos_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
-
- exynos_dp_init_video(dp);
- exynos_dp_config_video(dp, dp->video_info);
+ schedule_work(&dp->hotplug_work);
return 0;
}
diff --git a/drivers/video/exynos/exynos_dp_core.h b/drivers/video/exynos/exynos_dp_core.h
index 57b8a65..66f11f4 100644
--- a/drivers/video/exynos/exynos_dp_core.h
+++ b/drivers/video/exynos/exynos_dp_core.h
@@ -32,6 +32,7 @@ struct exynos_dp_device {
struct video_info *video_info;
struct link_train link_train;
+ struct work_struct hotplug_work;
};
/* exynos_dp_reg.c */
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-11-01 10:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-11-01 10:24 [PATCH v3 7/8] video: exynos_dp: Move hotplug into a workqueue Jingoo Han
2012-11-01 10:28 ` Jingoo Han
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox