* [PATCH v7 12/26] powerpc: Cleanup nvram includes
[not found] <20151101104202.301856132@telegraphics.com.au>
@ 2015-11-01 10:42 ` Finn Thain
2015-11-01 10:42 ` [PATCH v7 16/26] powerpc, fbdev: Use NV_CMODE and NV_VMODE only when CONFIG_PPC32 and CONFIG_PPC_PMA Finn Thain
2015-11-01 10:42 ` [PATCH v7 17/26] powerpc, fbdev: Use arch_nvram_ops methods instead of nvram_read_byte() and nvram_w Finn Thain
2 siblings, 0 replies; 3+ messages in thread
From: Finn Thain @ 2015-11-01 10:42 UTC (permalink / raw)
To: linux-kernel, linux-m68k, linuxppc-dev, Benjamin Herrenschmidt,
Paul Mackerras, Michael Ellerman, Arnd Bergmann,
Greg Kroah-Hartman, Jean-Christophe Plagniol-Villard,
Tomi Valkeinen, linux-fbdev
The nvram_read_byte() and nvram_write_byte() definitions in asm/nvram.h
duplicate those in linux/nvram.h. Get rid of the former to prepare for
adoption of struct arch_nvram_ops (which is defined in linux/nvram.h for
general use).
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
---
Changes since v4:
- Fix possible git bisect build failure with CONFIG_PPC_PMAC=n.
---
arch/powerpc/include/asm/nvram.h | 3 ---
arch/powerpc/kernel/setup_32.c | 1 +
drivers/char/generic_nvram.c | 1 +
drivers/video/fbdev/matrox/matroxfb_base.c | 2 +-
4 files changed, 3 insertions(+), 4 deletions(-)
Index: linux/arch/powerpc/include/asm/nvram.h
=================================--- linux.orig/arch/powerpc/include/asm/nvram.h 2015-11-01 21:41:24.000000000 +1100
+++ linux/arch/powerpc/include/asm/nvram.h 2015-11-01 21:41:38.000000000 +1100
@@ -101,7 +101,4 @@ extern int nvram_write_os_partition(stru
/* Determine NVRAM size */
extern ssize_t nvram_get_size(void);
-/* Normal access to NVRAM */
-extern unsigned char nvram_read_byte(int i);
-extern void nvram_write_byte(unsigned char c, int i);
#endif /* _ASM_POWERPC_NVRAM_H */
Index: linux/arch/powerpc/kernel/setup_32.c
=================================--- linux.orig/arch/powerpc/kernel/setup_32.c 2015-11-01 21:41:24.000000000 +1100
+++ linux/arch/powerpc/kernel/setup_32.c 2015-11-01 21:41:38.000000000 +1100
@@ -16,6 +16,7 @@
#include <linux/cpu.h>
#include <linux/console.h>
#include <linux/memblock.h>
+#include <linux/nvram.h>
#include <asm/io.h>
#include <asm/prom.h>
Index: linux/drivers/video/fbdev/matrox/matroxfb_base.c
=================================--- linux.orig/drivers/video/fbdev/matrox/matroxfb_base.c 2015-11-01 21:41:24.000000000 +1100
+++ linux/drivers/video/fbdev/matrox/matroxfb_base.c 2015-11-01 21:41:38.000000000 +1100
@@ -111,12 +111,12 @@
#include "matroxfb_g450.h"
#include <linux/matroxfb.h>
#include <linux/interrupt.h>
+#include <linux/nvram.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#ifdef CONFIG_PPC_PMAC
#include <asm/machdep.h>
-unsigned char nvram_read_byte(int);
static int default_vmode = VMODE_NVRAM;
static int default_cmode = CMODE_NVRAM;
#endif
Index: linux/drivers/char/generic_nvram.c
=================================--- linux.orig/drivers/char/generic_nvram.c 2015-11-01 21:41:24.000000000 +1100
+++ linux/drivers/char/generic_nvram.c 2015-11-01 21:41:38.000000000 +1100
@@ -20,6 +20,7 @@
#include <linux/fcntl.h>
#include <linux/init.h>
#include <linux/mutex.h>
+#include <linux/nvram.h>
#include <asm/uaccess.h>
#include <asm/nvram.h>
#ifdef CONFIG_PPC_PMAC
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH v7 16/26] powerpc, fbdev: Use NV_CMODE and NV_VMODE only when CONFIG_PPC32 and CONFIG_PPC_PMA
[not found] <20151101104202.301856132@telegraphics.com.au>
2015-11-01 10:42 ` [PATCH v7 12/26] powerpc: Cleanup nvram includes Finn Thain
@ 2015-11-01 10:42 ` Finn Thain
2015-11-01 10:42 ` [PATCH v7 17/26] powerpc, fbdev: Use arch_nvram_ops methods instead of nvram_read_byte() and nvram_w Finn Thain
2 siblings, 0 replies; 3+ messages in thread
From: Finn Thain @ 2015-11-01 10:42 UTC (permalink / raw)
To: linux-kernel, linux-m68k, linuxppc-dev,
Jean-Christophe Plagniol-Villard, Tomi Valkeinen, linux-fbdev
This patch addresses inconsistencies in Mac framebuffer drivers and their
use of Kconfig symbols relating to NVRAM, so PPC64 can use CONFIG_NVRAM.
Macintosh framebuffer drivers use default settings for color mode and
video mode that are found in NVRAM. On PCI Macs, MacOS stores display
settings in the Name Registry (NR) partition in NVRAM*. On NuBus Macs,
there is no NR partition and MacOS stores display mode settings in PRAM**.
Early model Macs are the ones most likely to benefit from these settings,
since they are more likely to have one display: a fixed-frequency monitor
connected to the built-in framebuffer device. Moreover, a single NV_CMODE
value and a single NV_VMODE value provide for only one display.
The NV_CMODE and NV_VMODE constants are apparently offsets into the NR
partition for Old World machines and not New World, which also suggests
that these defaults are not useful on later models.
All this argues for limiting NVRAM support in PowerMac fbdev drivers to
PPC32 and indeed this is already the case, since CONFIG_NVRAM cannot be
enabled on PPC64 at present.
For matroxfb, make the CONFIG_PPC32 condition explicit. That way the
driver won't crash on PPC64 when CONFIG_NVRAM becomes available there.
In imsttfb, add the missing CONFIG_NVRAM test to prevent a build failure,
since PPC64 does not implement nvram_read_byte(). Also add a missing
machine_is(powermac) check. Change the inconsistent CONFIG_PPC dependency
and the matching #ifdef tests to CONFIG_PPC_PMAC. Drop unused #includes.
In valkyriefb, for clarity and consistency with the other PowerMac fbdev
drivers, test for CONFIG_PPC_PMAC instead of !CONFIG_MAC. Remove a
bogus comment regarding PRAM.
* See GetPreferredConfiguration and SavePreferredConfiguration in
"Designing PCI Cards and Drivers for Power Macintosh Computers".
** See SetDefaultMode and GetDefaultMode in "Designing Cards and Drivers
for the Macintosh Family".
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
---
drivers/video/fbdev/Kconfig | 2 +-
drivers/video/fbdev/imsttfb.c | 13 +++++--------
drivers/video/fbdev/matrox/matroxfb_base.c | 2 +-
drivers/video/fbdev/valkyriefb.c | 14 ++++++--------
4 files changed, 13 insertions(+), 18 deletions(-)
Index: linux/drivers/video/fbdev/Kconfig
=================================--- linux.orig/drivers/video/fbdev/Kconfig 2015-11-01 21:41:23.000000000 +1100
+++ linux/drivers/video/fbdev/Kconfig 2015-11-01 21:41:43.000000000 +1100
@@ -544,7 +544,7 @@ config FB_IMSTT
bool "IMS Twin Turbo display support"
depends on (FB = y) && PCI
select FB_CFB_IMAGEBLIT
- select FB_MACMODES if PPC
+ select FB_MACMODES if PPC_PMAC
help
The IMS Twin Turbo is a PCI-based frame buffer card bundled with
many Macintosh and compatible computers.
Index: linux/drivers/video/fbdev/imsttfb.c
=================================--- linux.orig/drivers/video/fbdev/imsttfb.c 2015-11-01 21:41:23.000000000 +1100
+++ linux/drivers/video/fbdev/imsttfb.c 2015-11-01 21:41:43.000000000 +1100
@@ -30,10 +30,8 @@
#include <asm/io.h>
#include <linux/uaccess.h>
-#if defined(CONFIG_PPC)
+#if defined(CONFIG_PPC_PMAC)
#include <linux/nvram.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
#include "macmodes.h"
#endif
@@ -328,14 +326,13 @@ enum {
TVP = 1
};
-#define USE_NV_MODES 1
#define INIT_BPP 8
#define INIT_XRES 640
#define INIT_YRES 480
static int inverse = 0;
static char fontname[40] __initdata = { 0 };
-#if defined(CONFIG_PPC)
+#if defined(CONFIG_PPC_PMAC)
static signed char init_vmode = -1, init_cmode = -1;
#endif
@@ -1391,8 +1388,8 @@ static void init_imstt(struct fb_info *i
}
}
-#if USE_NV_MODES && defined(CONFIG_PPC32)
- {
+#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32) && defined(CONFIG_NVRAM)
+ if (machine_is(powermac)) {
int vmode = init_vmode, cmode = init_cmode;
if (vmode = -1) {
@@ -1566,7 +1563,7 @@ imsttfb_setup(char *options)
inverse = 1;
fb_invert_cmaps();
}
-#if defined(CONFIG_PPC)
+#if defined(CONFIG_PPC_PMAC)
else if (!strncmp(this_opt, "vmode:", 6)) {
int vmode = simple_strtoul(this_opt+6, NULL, 0);
if (vmode > 0 && vmode <= VMODE_MAX)
Index: linux/drivers/video/fbdev/matrox/matroxfb_base.c
=================================--- linux.orig/drivers/video/fbdev/matrox/matroxfb_base.c 2015-11-01 21:41:38.000000000 +1100
+++ linux/drivers/video/fbdev/matrox/matroxfb_base.c 2015-11-01 21:41:43.000000000 +1100
@@ -1876,7 +1876,7 @@ static int initMatrox2(struct matrox_fb_
struct fb_var_screeninfo var;
if (default_vmode <= 0 || default_vmode > VMODE_MAX)
default_vmode = VMODE_640_480_60;
-#ifdef CONFIG_NVRAM
+#if defined(CONFIG_PPC32) && defined(CONFIG_NVRAM)
if (default_cmode = CMODE_NVRAM)
default_cmode = nvram_read_byte(NV_CMODE);
#endif
Index: linux/drivers/video/fbdev/valkyriefb.c
=================================--- linux.orig/drivers/video/fbdev/valkyriefb.c 2015-11-01 21:41:23.000000000 +1100
+++ linux/drivers/video/fbdev/valkyriefb.c 2015-11-01 21:41:43.000000000 +1100
@@ -65,14 +65,12 @@
#include "macmodes.h"
#include "valkyriefb.h"
-#ifdef CONFIG_MAC
-/* We don't yet have functions to read the PRAM... perhaps we can
- adapt them from the PPC code? */
-static int default_vmode = VMODE_CHOOSE;
-static int default_cmode = CMODE_8;
-#else
+#ifdef CONFIG_PPC_PMAC
static int default_vmode = VMODE_NVRAM;
static int default_cmode = CMODE_NVRAM;
+#else
+static int default_vmode = VMODE_CHOOSE;
+static int default_cmode = CMODE_8;
#endif
struct fb_par_valkyrie {
@@ -285,7 +283,7 @@ static void __init valkyrie_choose_mode(
printk(KERN_INFO "Monitor sense value = 0x%x\n", p->sense);
/* Try to pick a video mode out of NVRAM if we have one. */
-#if !defined(CONFIG_MAC) && defined(CONFIG_NVRAM)
+#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_NVRAM)
if (default_vmode = VMODE_NVRAM) {
default_vmode = nvram_read_byte(NV_VMODE);
if (default_vmode <= 0
@@ -298,7 +296,7 @@ static void __init valkyrie_choose_mode(
default_vmode = mac_map_monitor_sense(p->sense);
if (!valkyrie_reg_init[default_vmode - 1])
default_vmode = VMODE_640_480_67;
-#if !defined(CONFIG_MAC) && defined(CONFIG_NVRAM)
+#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_NVRAM)
if (default_cmode = CMODE_NVRAM)
default_cmode = nvram_read_byte(NV_CMODE);
#endif
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH v7 17/26] powerpc, fbdev: Use arch_nvram_ops methods instead of nvram_read_byte() and nvram_w
[not found] <20151101104202.301856132@telegraphics.com.au>
2015-11-01 10:42 ` [PATCH v7 12/26] powerpc: Cleanup nvram includes Finn Thain
2015-11-01 10:42 ` [PATCH v7 16/26] powerpc, fbdev: Use NV_CMODE and NV_VMODE only when CONFIG_PPC32 and CONFIG_PPC_PMA Finn Thain
@ 2015-11-01 10:42 ` Finn Thain
2 siblings, 0 replies; 3+ messages in thread
From: Finn Thain @ 2015-11-01 10:42 UTC (permalink / raw)
To: linux-kernel, linux-m68k, linuxppc-dev, Benjamin Herrenschmidt,
Paul Mackerras, Michael Ellerman, Arnd Bergmann,
Greg Kroah-Hartman, Jean-Christophe Plagniol-Villard,
Tomi Valkeinen, linux-fbdev
Make use of arch_nvram_ops in device drivers so that the nvram_* function
exports can be removed.
Since they are no longer global symbols, rename the PPC32 nvram_* functions
appropriately.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
---
Changed since v4:
- Split off the CONFIG_PPC32, CONFIG_PPC_PMAC and CONFIG_NVRAM tests into
a separate patch.
---
arch/powerpc/kernel/setup_32.c | 8 ++++----
drivers/char/generic_nvram.c | 4 ++--
drivers/video/fbdev/controlfb.c | 4 ++--
drivers/video/fbdev/imsttfb.c | 4 ++--
drivers/video/fbdev/matrox/matroxfb_base.c | 2 +-
drivers/video/fbdev/platinumfb.c | 4 ++--
drivers/video/fbdev/valkyriefb.c | 4 ++--
7 files changed, 15 insertions(+), 15 deletions(-)
Index: linux/arch/powerpc/kernel/setup_32.c
=================================--- linux.orig/arch/powerpc/kernel/setup_32.c 2015-11-01 21:41:42.000000000 +1100
+++ linux/arch/powerpc/kernel/setup_32.c 2015-11-01 21:41:45.000000000 +1100
@@ -176,20 +176,18 @@ __setup("l3cr=", ppc_setup_l3cr);
#ifdef CONFIG_GENERIC_NVRAM
-unsigned char nvram_read_byte(int addr)
+static unsigned char ppc_nvram_read_byte(int addr)
{
if (ppc_md.nvram_read_val)
return ppc_md.nvram_read_val(addr);
return 0xff;
}
-EXPORT_SYMBOL(nvram_read_byte);
-void nvram_write_byte(unsigned char val, int addr)
+static void ppc_nvram_write_byte(unsigned char val, int addr)
{
if (ppc_md.nvram_write_val)
ppc_md.nvram_write_val(addr, val);
}
-EXPORT_SYMBOL(nvram_write_byte);
static ssize_t ppc_nvram_get_size(void)
{
@@ -206,6 +204,8 @@ static long ppc_nvram_sync(void)
}
const struct nvram_ops arch_nvram_ops = {
+ .read_byte = ppc_nvram_read_byte,
+ .write_byte = ppc_nvram_write_byte,
.get_size = ppc_nvram_get_size,
.sync = ppc_nvram_sync,
};
Index: linux/drivers/char/generic_nvram.c
=================================--- linux.orig/drivers/char/generic_nvram.c 2015-11-01 21:41:42.000000000 +1100
+++ linux/drivers/char/generic_nvram.c 2015-11-01 21:41:45.000000000 +1100
@@ -63,7 +63,7 @@ static ssize_t read_nvram(struct file *f
if (*ppos >= nvram_len)
return 0;
for (i = *ppos; count > 0 && i < nvram_len; ++i, ++p, --count)
- if (__put_user(nvram_read_byte(i), p))
+ if (__put_user(arch_nvram_ops.read_byte(i), p))
return -EFAULT;
*ppos = i;
return p - buf;
@@ -83,7 +83,7 @@ static ssize_t write_nvram(struct file *
for (i = *ppos; count > 0 && i < nvram_len; ++i, ++p, --count) {
if (__get_user(c, p))
return -EFAULT;
- nvram_write_byte(c, i);
+ arch_nvram_ops.write_byte(c, i);
}
*ppos = i;
return p - buf;
Index: linux/drivers/video/fbdev/controlfb.c
=================================--- linux.orig/drivers/video/fbdev/controlfb.c 2015-11-01 21:41:23.000000000 +1100
+++ linux/drivers/video/fbdev/controlfb.c 2015-11-01 21:41:45.000000000 +1100
@@ -415,7 +415,7 @@ static int __init init_control(struct fb
/* Try to pick a video mode out of NVRAM if we have one. */
#ifdef CONFIG_NVRAM
if (default_cmode = CMODE_NVRAM) {
- cmode = nvram_read_byte(NV_CMODE);
+ cmode = arch_nvram_ops.read_byte(NV_CMODE);
if(cmode < CMODE_8 || cmode > CMODE_32)
cmode = CMODE_8;
} else
@@ -423,7 +423,7 @@ static int __init init_control(struct fb
cmodeÞfault_cmode;
#ifdef CONFIG_NVRAM
if (default_vmode = VMODE_NVRAM) {
- vmode = nvram_read_byte(NV_VMODE);
+ vmode = arch_nvram_ops.read_byte(NV_VMODE);
if (vmode < 1 || vmode > VMODE_MAX ||
control_mac_modes[vmode - 1].m[full] < cmode) {
sense = read_control_sense(p);
Index: linux/drivers/video/fbdev/imsttfb.c
=================================--- linux.orig/drivers/video/fbdev/imsttfb.c 2015-11-01 21:41:43.000000000 +1100
+++ linux/drivers/video/fbdev/imsttfb.c 2015-11-01 21:41:45.000000000 +1100
@@ -1393,12 +1393,12 @@ static void init_imstt(struct fb_info *i
int vmode = init_vmode, cmode = init_cmode;
if (vmode = -1) {
- vmode = nvram_read_byte(NV_VMODE);
+ vmode = arch_nvram_ops.read_byte(NV_VMODE);
if (vmode <= 0 || vmode > VMODE_MAX)
vmode = VMODE_640_480_67;
}
if (cmode = -1) {
- cmode = nvram_read_byte(NV_CMODE);
+ cmode = arch_nvram_ops.read_byte(NV_CMODE);
if (cmode < CMODE_8 || cmode > CMODE_32)
cmode = CMODE_8;
}
Index: linux/drivers/video/fbdev/matrox/matroxfb_base.c
=================================--- linux.orig/drivers/video/fbdev/matrox/matroxfb_base.c 2015-11-01 21:41:43.000000000 +1100
+++ linux/drivers/video/fbdev/matrox/matroxfb_base.c 2015-11-01 21:41:45.000000000 +1100
@@ -1878,7 +1878,7 @@ static int initMatrox2(struct matrox_fb_
default_vmode = VMODE_640_480_60;
#if defined(CONFIG_PPC32) && defined(CONFIG_NVRAM)
if (default_cmode = CMODE_NVRAM)
- default_cmode = nvram_read_byte(NV_CMODE);
+ default_cmode = arch_nvram_ops.read_byte(NV_CMODE);
#endif
if (default_cmode < CMODE_8 || default_cmode > CMODE_32)
default_cmode = CMODE_8;
Index: linux/drivers/video/fbdev/platinumfb.c
=================================--- linux.orig/drivers/video/fbdev/platinumfb.c 2015-11-01 21:41:23.000000000 +1100
+++ linux/drivers/video/fbdev/platinumfb.c 2015-11-01 21:41:45.000000000 +1100
@@ -349,7 +349,7 @@ static int platinum_init_fb(struct fb_in
printk(KERN_INFO "platinumfb: Monitor sense value = 0x%x, ", sense);
if (default_vmode = VMODE_NVRAM) {
#ifdef CONFIG_NVRAM
- default_vmode = nvram_read_byte(NV_VMODE);
+ default_vmode = arch_nvram_ops.read_byte(NV_VMODE);
if (default_vmode <= 0 || default_vmode > VMODE_MAX ||
!platinum_reg_init[default_vmode-1])
#endif
@@ -362,7 +362,7 @@ static int platinum_init_fb(struct fb_in
default_vmode = VMODE_640_480_60;
#ifdef CONFIG_NVRAM
if (default_cmode = CMODE_NVRAM)
- default_cmode = nvram_read_byte(NV_CMODE);
+ default_cmode = arch_nvram_ops.read_byte(NV_CMODE);
#endif
if (default_cmode < CMODE_8 || default_cmode > CMODE_32)
default_cmode = CMODE_8;
Index: linux/drivers/video/fbdev/valkyriefb.c
=================================--- linux.orig/drivers/video/fbdev/valkyriefb.c 2015-11-01 21:41:43.000000000 +1100
+++ linux/drivers/video/fbdev/valkyriefb.c 2015-11-01 21:41:45.000000000 +1100
@@ -285,7 +285,7 @@ static void __init valkyrie_choose_mode(
/* Try to pick a video mode out of NVRAM if we have one. */
#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_NVRAM)
if (default_vmode = VMODE_NVRAM) {
- default_vmode = nvram_read_byte(NV_VMODE);
+ default_vmode = arch_nvram_ops.read_byte(NV_VMODE);
if (default_vmode <= 0
|| default_vmode > VMODE_MAX
|| !valkyrie_reg_init[default_vmode - 1])
@@ -298,7 +298,7 @@ static void __init valkyrie_choose_mode(
default_vmode = VMODE_640_480_67;
#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_NVRAM)
if (default_cmode = CMODE_NVRAM)
- default_cmode = nvram_read_byte(NV_CMODE);
+ default_cmode = arch_nvram_ops.read_byte(NV_CMODE);
#endif
/*
^ permalink raw reply [flat|nested] 3+ messages in thread