Linux Framebuffer Layer development
 help / color / mirror / Atom feed
From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
To: "Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
	"Maxime Ripard" <mripard@kernel.org>,
	"Thomas Zimmermann" <tzimmermann@suse.de>,
	"David Airlie" <airlied@gmail.com>,
	"Simona Vetter" <simona@ffwll.ch>,
	"Dave Stevenson" <dave.stevenson@raspberrypi.com>,
	"Dmitry Baryshkov" <lumag@kernel.org>,
	"Andrzej Hajda" <andrzej.hajda@intel.com>,
	"Neil Armstrong" <neil.armstrong@linaro.org>,
	"Robert Foss" <rfoss@kernel.org>,
	"Laurent Pinchart" <Laurent.pinchart@ideasonboard.com>,
	"Jonas Karlman" <jonas@kwiboo.se>,
	"Jernej Skrabec" <jernej.skrabec@gmail.com>,
	"Luca Ceresoli" <luca.ceresoli@bootlin.com>,
	"Chen-Yu Tsai" <wens@kernel.org>,
	"Samuel Holland" <samuel@sholland.org>,
	"Maíra Canal" <mcanal@igalia.com>,
	"Raspberry Pi Kernel Maintenance" <kernel-list@raspberrypi.com>,
	"Raphael Gallais-Pou" <rgallaispou@gmail.com>,
	"Sandy Huang" <hjc@rock-chips.com>,
	"Heiko Stübner" <heiko@sntech.de>,
	"Andy Yan" <andy.yan@rock-chips.com>,
	"Algea Cao" <algea.cao@rock-chips.com>,
	"Daniel Stone" <daniels@collabora.com>,
	"Liu Ying" <victor.liu@nxp.com>, "Phong LE" <ple@baylibre.com>,
	"Helge Deller" <deller@gmx.de>
Cc: kernel@collabora.com, linux-kernel@vger.kernel.org,
	 dri-devel@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org,
	 linux-sunxi@lists.linux.dev, linux-rockchip@lists.infradead.org,
	 linux-fbdev@vger.kernel.org,
	Maud Spierings <maud_spierings@hotmail.com>,
	 Diederik de Haas <diederik@cknow-tech.com>
Subject: [PATCH v11 34/74] drm/rockchip: dw_hdmi_qp: Use local dev variable consistently in bind()
Date: Tue, 01 Sep 2026 21:50:58 +0300	[thread overview]
Message-ID: <20260901-dw-hdmi-qp-scramb-v11-34-bc12954a0688@collabora.com> (raw)
In-Reply-To: <20260901-dw-hdmi-qp-scramb-v11-0-bc12954a0688@collabora.com>

Replace indirect struct device accesses via hdmi->dev and pdev->dev with
the local dev parameter already available in dw_hdmi_qp_rockchip_bind(),
for consistency and readability.

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Maud Spierings <maud_spierings@hotmail.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # NanoPC-T6 LTS, Rock 5B
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c | 33 +++++++++++++-------------
 1 file changed, 16 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
index df0e2bb1eedc..456bf2f194d7 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
@@ -563,7 +563,7 @@ static int dw_hdmi_qp_rockchip_bind(struct device *dev, struct device *master,
 	struct clk *ref_clk;
 	int ret, irq, i;
 
-	if (!pdev->dev.of_node)
+	if (!dev->of_node)
 		return -ENODEV;
 
 	hdmi = drmm_kzalloc(drm, sizeof(*hdmi), GFP_KERNEL);
@@ -583,7 +583,7 @@ static int dw_hdmi_qp_rockchip_bind(struct device *dev, struct device *master,
 		return dev_err_probe(dev, -ENODEV, "Missing platform ctrl ops\n");
 
 	hdmi->ctrl_ops = cfg->ctrl_ops;
-	hdmi->dev = &pdev->dev;
+	hdmi->dev = dev;
 	hdmi->port_id = -ENODEV;
 
 	/* Identify port ID by matching base IO address */
@@ -594,7 +594,7 @@ static int dw_hdmi_qp_rockchip_bind(struct device *dev, struct device *master,
 		}
 	}
 	if (hdmi->port_id < 0)
-		return dev_err_probe(hdmi->dev, hdmi->port_id,
+		return dev_err_probe(dev, hdmi->port_id,
 				     "Failed to match HDMI port ID\n");
 
 	plat_data.phy_ops = cfg->phy_ops;
@@ -622,37 +622,36 @@ static int dw_hdmi_qp_rockchip_bind(struct device *dev, struct device *master,
 	hdmi->regmap = syscon_regmap_lookup_by_phandle(dev->of_node,
 						       "rockchip,grf");
 	if (IS_ERR(hdmi->regmap))
-		return dev_err_probe(hdmi->dev, PTR_ERR(hdmi->regmap),
+		return dev_err_probe(dev, PTR_ERR(hdmi->regmap),
 				     "Unable to get rockchip,grf\n");
 
 	hdmi->vo_regmap = syscon_regmap_lookup_by_phandle(dev->of_node,
 							  "rockchip,vo-grf");
 	if (IS_ERR(hdmi->vo_regmap))
-		return dev_err_probe(hdmi->dev, PTR_ERR(hdmi->vo_regmap),
+		return dev_err_probe(dev, PTR_ERR(hdmi->vo_regmap),
 				     "Unable to get rockchip,vo-grf\n");
 
-	ret = devm_clk_bulk_get_all_enabled(hdmi->dev, &clks);
+	ret = devm_clk_bulk_get_all_enabled(dev, &clks);
 	if (ret < 0)
-		return dev_err_probe(hdmi->dev, ret, "Failed to get clocks\n");
+		return dev_err_probe(dev, ret, "Failed to get clocks\n");
 
-	ref_clk = clk_get(hdmi->dev, "ref");
+	ref_clk = clk_get(dev, "ref");
 	if (IS_ERR(ref_clk))
-		return dev_err_probe(hdmi->dev, PTR_ERR(ref_clk),
+		return dev_err_probe(dev, PTR_ERR(ref_clk),
 				     "Failed to get ref clock\n");
 
 	plat_data.ref_clk_rate = clk_get_rate(ref_clk);
 	clk_put(ref_clk);
 
-	hdmi->frl_enable_gpio = devm_gpiod_get_optional(hdmi->dev, "frl-enable",
+	hdmi->frl_enable_gpio = devm_gpiod_get_optional(dev, "frl-enable",
 							GPIOD_OUT_LOW);
 	if (IS_ERR(hdmi->frl_enable_gpio))
-		return dev_err_probe(hdmi->dev, PTR_ERR(hdmi->frl_enable_gpio),
+		return dev_err_probe(dev, PTR_ERR(hdmi->frl_enable_gpio),
 				     "Failed to request FRL enable GPIO\n");
 
 	hdmi->phy = devm_of_phy_get_by_index(dev, dev->of_node, 0);
 	if (IS_ERR(hdmi->phy))
-		return dev_err_probe(hdmi->dev, PTR_ERR(hdmi->phy),
-				     "Failed to get phy\n");
+		return dev_err_probe(dev, PTR_ERR(hdmi->phy), "Failed to get phy\n");
 
 	cfg->ctrl_ops->io_init(hdmi);
 
@@ -670,7 +669,7 @@ static int dw_hdmi_qp_rockchip_bind(struct device *dev, struct device *master,
 	if (irq < 0)
 		return irq;
 
-	ret = devm_request_threaded_irq(hdmi->dev, irq,
+	ret = devm_request_threaded_irq(dev, irq,
 					cfg->ctrl_ops->hardirq_callback,
 					cfg->ctrl_ops->irq_callback,
 					IRQF_SHARED, "dw-hdmi-qp-hpd",
@@ -681,16 +680,16 @@ static int dw_hdmi_qp_rockchip_bind(struct device *dev, struct device *master,
 	drm_encoder_helper_add(encoder, &dw_hdmi_qp_rockchip_encoder_helper_funcs);
 	ret = drmm_encoder_init(drm, encoder, NULL, DRM_MODE_ENCODER_TMDS, NULL);
 	if (ret)
-		return dev_err_probe(hdmi->dev, ret, "Failed to init encoder\n");
+		return dev_err_probe(dev, ret, "Failed to init encoder\n");
 
 	hdmi->hdmi = dw_hdmi_qp_bind(pdev, encoder, &plat_data);
 	if (IS_ERR(hdmi->hdmi))
-		return dev_err_probe(hdmi->dev, PTR_ERR(hdmi->hdmi),
+		return dev_err_probe(dev, PTR_ERR(hdmi->hdmi),
 				     "Failed to bind dw-hdmi-qp\n");
 
 	connector = drm_bridge_connector_init(drm, encoder);
 	if (IS_ERR(connector))
-		return dev_err_probe(hdmi->dev, PTR_ERR(connector),
+		return dev_err_probe(dev, PTR_ERR(connector),
 				     "Failed to init bridge connector\n");
 
 	platform_set_drvdata(pdev, hdmi);

-- 
2.55.0


  parent reply	other threads:[~2026-09-01 18:51 UTC|newest]

Thread overview: 93+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-01 18:50 [PATCH v11 00/74] Add HDMI 2.0 support to DW HDMI QP TX Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 01/74] video/hdmi: Introduce HDMI version enum Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 02/74] drm/connector: hdmi: Handle reset() state allocation failure Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 03/74] drm/display: hdmi: Rename drmm_connector_hdmi_init() to *_ini2() Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 04/74] drm/connector: Add drmm_connector_hdmi_init() with new signature Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 05/74] drm/display: bridge_connector: Convert to drmm_connector_hdmi_init() Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 06/74] drm/probe-helper: Introduce .force_ctx() connector callback Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 07/74] drm/connector: Add HDMI 2.0 scrambler infrastructure Cristian Ciocaltea
2026-09-08 12:27   ` Maxime Ripard
2026-09-01 18:50 ` [PATCH v11 08/74] drm/display: scdc-helper: Add macro for connector-prefixed debug messages Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 09/74] drm/display: scdc-helper: Add helper to set SCDC version information Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 10/74] drm/display: hdmi: Add HDMI 2.0 scrambling management helpers Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 11/74] drm/display: hdmi: Advertise SCDC source version when scrambling Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 12/74] drm/bridge: Fix unlocked list_del in drm_bridge_add() Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 13/74] drm/bridge: Fix NULL deref in drm_bridge_add() for legacy bridges Cristian Ciocaltea
2026-09-08  9:24   ` Maxime Ripard
2026-09-01 18:50 ` [PATCH v11 14/74] drm/bridge: Fix unlocked list access in drm_bridge_attach() Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 15/74] drm/bridge: Remove redundant error check in drm_bridge_helper_reset_crtc() Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 16/74] drm/bridge: Add bridge ops for source-side HDMI 2.0 scrambling Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 17/74] drm/display: bridge_connector: Use cached connector status in .get_modes() Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 18/74] drm/display: bridge_connector: Switch to .detect_ctx() connector helper Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 19/74] drm/display: bridge_connector: Wire up HDMI 2.0 scrambler callbacks Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 20/74] drm/display: hdmi-state-helper: Add source TMDS rate validation Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 21/74] drm/display: hdmi-state-helper: Pass acquire ctx to hotplug helpers Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 22/74] drm/display: hdmi-state-helper: Add drm_atomic_helper_connector_hdmi_force_ctx() Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 23/74] drm/display: hdmi-state-helper: Sync SCDC state on hotplug Cristian Ciocaltea
2026-09-08 12:48   ` Maxime Ripard
2026-09-01 18:50 ` [PATCH v11 24/74] drm/display: hdmi-state-helper: Set HDMI scrambling requirement Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 25/74] drm/display: bridge_connector: Switch to .force_ctx() connector helper Cristian Ciocaltea
2026-09-08  9:53   ` Maxime Ripard
2026-09-01 18:50 ` [PATCH v11 26/74] drm/bridge: dw-hdmi-qp: Rate limit i2c read error messages Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 27/74] drm/bridge: dw-hdmi-qp: Provide .{enable,disable}_hpd() PHY ops Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 28/74] drm/bridge: dw-hdmi-qp: Remove unused workqueue include and define Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 29/74] drm/bridge: dw-hdmi-qp: Add HDMI 2.0 scrambling support Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 30/74] drm/bridge: dw-hdmi-qp: Provide dw_hdmi_qp_hpd_notify() helper Cristian Ciocaltea
2026-09-08 12:48   ` Maxime Ripard
2026-09-01 18:50 ` [PATCH v11 31/74] drm/rockchip: dw_hdmi_qp: Fix invalid drvdata access in PM ops Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 32/74] drm/rockchip: dw_hdmi_qp: Cancel pending HPD work on suspend Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 33/74] drm/rockchip: dw_hdmi_qp: Add missing newlines in dev_err_probe() messages Cristian Ciocaltea
2026-09-01 18:50 ` Cristian Ciocaltea [this message]
2026-09-01 18:50 ` [PATCH v11 35/74] drm/rockchip: dw_hdmi_qp: Avoid spurious HPD IRQ thread wakeups Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 36/74] drm/rockchip: dw_hdmi_qp: Mask RK3576 HPD IRQ in io_init Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 37/74] drm/rockchip: dw_hdmi_qp: Implement .{enable,disable}_hpd() PHY ops Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 38/74] drm/rockchip: dw_hdmi_qp: Factor out HPD interrupt (un)mask helpers Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 39/74] drm/rockchip: dw_hdmi_qp: Control the HPD IRQ line via the bridge HPD ops Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 40/74] drm/rockchip: dw_hdmi_qp: Use dw_hdmi_qp_hpd_notify() for HPD reports Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 41/74] drm/bridge: dw-hdmi-qp: Drop unused .setup_hpd() phy op Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 42/74] drm/vc4: hdmi: Use common TMDS char rate constants Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 43/74] drm/vc4: hdmi: Switch to drm_hdmi_mode_needs_scrambling() Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 44/74] drm/vc4: hdmi: Switch to .force_ctx() connector helper Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 45/74] drm/vc4: hdmi: Propagate -EDEADLK to the top level Cristian Ciocaltea
2026-09-08 13:04   ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 46/74] drm/vc4: hdmi: Convert to drmm_connector_hdmi_init() Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 47/74] drm/vc4: hdmi: Convert to common HDMI 2.0 scrambling infrastructure Cristian Ciocaltea
2026-09-08 13:05   ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 48/74] drm/vc4: hdmi: Defer pixel clock validation to HDMI helpers Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 49/74] drm/display: hdmi-state-helper: Drop drm_atomic_helper_connector_hdmi_force() Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 50/74] drm/bridge: adv7511: Advertise HDMI 1.2 capabilities Cristian Ciocaltea
2026-09-08  9:58   ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 51/74] drm/bridge: inno-hdmi: " Cristian Ciocaltea
2026-09-08  9:58   ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 52/74] drm/bridge: ite-it6263: Drop redundant .mode_valid hook Cristian Ciocaltea
2026-09-08  9:59   ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 53/74] drm/bridge: ite-it6263: Advertise HDMI 1.3 capabilities Cristian Ciocaltea
2026-09-08 11:45   ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 54/74] drm/bridge: ite-it66121: Advertise HDMI 1.2 capabilities Cristian Ciocaltea
2026-09-08 11:46   ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 55/74] drm/bridge: lontium-lt9611: Advertise HDMI 1.4 capabilities Cristian Ciocaltea
2026-09-08 11:46   ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 56/74] drm/rockchip: rk3066_hdmi: " Cristian Ciocaltea
2026-09-08 11:46   ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 57/74] drm/sun4i: hdmi: Convert to drmm_connector_hdmi_init() Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 58/74] drm/tests: edid: Add 4K@60Hz EDID with 600MHz TMDS Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 59/74] drm/tests: edid: Fix conformity for 1080p+4K YUV420 200MHz EDID Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 60/74] drm/tests: edid: Fix conformity for 4K RGB/YUV 340MHz EDID Cristian Ciocaltea
2026-09-08 11:47   ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 61/74] drm/tests: bridge: Set supported HDMI version Cristian Ciocaltea
2026-09-08 11:47   ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 62/74] drm/tests: connector: Convert to drmm_connector_hdmi_init() Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 63/74] drm/tests: connector: Add HDMI max_tmds_char_rate init coverage Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 64/74] drm/tests: connector: Add HDMI source-side scrambler coverage Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 65/74] drm/tests: hdmi_state_helper: Convert to drmm_connector_hdmi_init() Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 66/74] drm/tests: hdmi_state_helper: Add connector-provided max_tmds_char_rate coverage Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 67/74] drm/tests: hdmi_state_helper: Cover source-side scrambling decision Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 68/74] drm/connector: Remove drmm_connector_hdmi_ini2() Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 69/74] drm/connector: Drop redundant hdmi vendor/product fields Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 70/74] drm/connector: Drop redundant hdmi supported_formats field Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 71/74] drm/connector: Drop redundant max_bpc field Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 72/74] video/hdmi: Define SPD InfoFrame field lengths and use strtomem_pad() Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 73/74] drm/connector: Use the SPD InfoFrame field length defines Cristian Ciocaltea
2026-09-08 12:17   ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 74/74] drm/tests: hdmi: Add SPD InfoFrame vendor/product coverage Cristian Ciocaltea
2026-09-08  9:48 ` [PATCH v11 00/74] Add HDMI 2.0 support to DW HDMI QP TX Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260901-dw-hdmi-qp-scramb-v11-34-bc12954a0688@collabora.com \
    --to=cristian.ciocaltea@collabora.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=airlied@gmail.com \
    --cc=algea.cao@rock-chips.com \
    --cc=andrzej.hajda@intel.com \
    --cc=andy.yan@rock-chips.com \
    --cc=daniels@collabora.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=deller@gmx.de \
    --cc=diederik@cknow-tech.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=heiko@sntech.de \
    --cc=hjc@rock-chips.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=kernel-list@raspberrypi.com \
    --cc=kernel@collabora.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=luca.ceresoli@bootlin.com \
    --cc=lumag@kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=maud_spierings@hotmail.com \
    --cc=mcanal@igalia.com \
    --cc=mripard@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=ple@baylibre.com \
    --cc=rfoss@kernel.org \
    --cc=rgallaispou@gmail.com \
    --cc=samuel@sholland.org \
    --cc=simona@ffwll.ch \
    --cc=tzimmermann@suse.de \
    --cc=victor.liu@nxp.com \
    --cc=wens@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox