From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
To: "Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
"Maxime Ripard" <mripard@kernel.org>,
"Thomas Zimmermann" <tzimmermann@suse.de>,
"David Airlie" <airlied@gmail.com>,
"Simona Vetter" <simona@ffwll.ch>,
"Dave Stevenson" <dave.stevenson@raspberrypi.com>,
"Dmitry Baryshkov" <lumag@kernel.org>,
"Andrzej Hajda" <andrzej.hajda@intel.com>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"Robert Foss" <rfoss@kernel.org>,
"Laurent Pinchart" <Laurent.pinchart@ideasonboard.com>,
"Jonas Karlman" <jonas@kwiboo.se>,
"Jernej Skrabec" <jernej.skrabec@gmail.com>,
"Luca Ceresoli" <luca.ceresoli@bootlin.com>,
"Chen-Yu Tsai" <wens@kernel.org>,
"Samuel Holland" <samuel@sholland.org>,
"Maíra Canal" <mcanal@igalia.com>,
"Raspberry Pi Kernel Maintenance" <kernel-list@raspberrypi.com>,
"Raphael Gallais-Pou" <rgallaispou@gmail.com>,
"Sandy Huang" <hjc@rock-chips.com>,
"Heiko Stübner" <heiko@sntech.de>,
"Andy Yan" <andy.yan@rock-chips.com>,
"Algea Cao" <algea.cao@rock-chips.com>,
"Daniel Stone" <daniels@collabora.com>,
"Liu Ying" <victor.liu@nxp.com>, "Phong LE" <ple@baylibre.com>,
"Helge Deller" <deller@gmx.de>
Cc: kernel@collabora.com, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-rockchip@lists.infradead.org,
linux-fbdev@vger.kernel.org
Subject: [PATCH v11 58/74] drm/tests: edid: Add 4K@60Hz EDID with 600MHz TMDS
Date: Tue, 01 Sep 2026 21:51:22 +0300 [thread overview]
Message-ID: <20260901-dw-hdmi-qp-scramb-v11-58-bc12954a0688@collabora.com> (raw)
In-Reply-To: <20260901-dw-hdmi-qp-scramb-v11-0-bc12954a0688@collabora.com>
Add a new test EDID advertising the following capabilities:
Max resolution: 3840x2160@60Hz with RGB, YUV444, YUV422, YUV420
Max BPC: 16
Max TMDS clock: 600 MHz
This is needed to exercise the new HDMI infrastructure that decides
whether scrambling needs to be enabled for a given display mode and
to validate that high-rate modes are properly rejected/accepted
depending on the source/sink scrambling capability.
The EDID is derived from test_edid_hdmi_4k_rgb_yuv420_dc_max_340mhz
with the following changes:
- Upgraded the first DTD from 3840x2160@30 (297 MHz) to 3840x2160@60
(594 MHz). The H/V totals (4400x2250) and porches already match the
HDMI 2.0 4K@60Hz standard timing, so only the pixel clock had to be
bumped.
- Widened Display Range Limits descriptor to cover the new timing, i.e.
24-140 kHz H, max dotclock 600 MHz.
- Updated CTA-861 Video Data Block to advertise VIC 97 (4K@60Hz) instead
of VIC 95 (4k30).
- Bumped HF-VSDB Max TMDS Character Rate to 600 MHz, keeping
SCDC_Present set so that the sink advertises scrambling support.
- Cleared HDMI VSDB Max TMDS clock byte, as required by HDMI 2.0 when
the HF-VSDB declares a Max TMDS Character Rate above 340 MHz.
- Provided a Video Capability Data Block advertising selectable RGB and
YCC quantization range plus underscan for IT/CE formats; also set the
'IT Video Formats Underscanned' bit in the CTA-861 extension header to
match.
- Aligned base block image size with the DTD (160x90 cm) and replaced
the bogus 'Week of Manufacture = 0xff' with the Model Year code, both
fixing inherited EDID conformity warnings.
- Dropped the empty YCbCr 4:2:0 Video Data Block inherited from the
parent EDID, which is flagged as a failure by edid-decode v1.33.0
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
drivers/gpu/drm/tests/drm_kunit_edid.c | 129 +++++++++++++++++++++++++++++++++
drivers/gpu/drm/tests/drm_kunit_edid.h | 1 +
2 files changed, 130 insertions(+)
diff --git a/drivers/gpu/drm/tests/drm_kunit_edid.c b/drivers/gpu/drm/tests/drm_kunit_edid.c
index c807ae0d9faa..673a0ea8c2ae 100644
--- a/drivers/gpu/drm/tests/drm_kunit_edid.c
+++ b/drivers/gpu/drm/tests/drm_kunit_edid.c
@@ -990,6 +990,135 @@ const unsigned char test_edid_hdmi_4k_rgb_yuv420_dc_max_340mhz[] = {
};
EXPORT_SYMBOL(test_edid_hdmi_4k_rgb_yuv420_dc_max_340mhz);
+/*
+ * Max resolution: 3840x2160@60Hz with RGB, YUV444, YUV422, YUV420
+ * Max BPC: 16 for all modes
+ * Max TMDS clock: 600 MHz
+ *
+ * edid-decode (hex):
+ *
+ * 00 ff ff ff ff ff ff 00 31 d8 34 00 00 00 00 00
+ * 00 23 01 03 80 a0 5a 78 0f ee 91 a3 54 4c 99 26
+ * 0f 50 54 20 00 00 01 01 01 01 01 01 01 01 01 01
+ * 01 01 01 01 01 01 08 e8 00 30 f2 70 5a 80 b0 58
+ * 8a 00 40 84 63 00 00 1e 00 00 00 fc 00 54 65 73
+ * 74 20 45 44 49 44 0a 20 20 20 00 00 00 fd 00 18
+ * 55 18 8c 3c 00 0a 20 20 20 20 20 20 00 00 00 10
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 a9
+ *
+ * 02 03 28 b1 41 61 6c 03 0c 00 10 00 78 00 20 00
+ * 00 01 03 6d d8 5d c4 01 78 80 07 00 00 00 00 00
+ * 00 e2 00 ca e3 0f 01 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 54
+ *
+ * ----------------
+ *
+ * Block 0, Base EDID:
+ * EDID Structure Version & Revision: 1.3
+ * Vendor & Product Identification:
+ * Manufacturer: LNX
+ * Model: 52
+ * Made in: 2025
+ * Basic Display Parameters & Features:
+ * Digital display
+ * Maximum image size: 160 cm x 90 cm
+ * Gamma: 2.20
+ * RGB color display
+ * Default (sRGB) color space is primary color space
+ * First detailed timing is the preferred timing
+ * Supports GTF timings within operating range
+ * Color Characteristics:
+ * Red : 0.6396, 0.3300
+ * Green: 0.2998, 0.5996
+ * Blue : 0.1503, 0.0595
+ * White: 0.3125, 0.3291
+ * Established Timings I & II:
+ * DMT 0x04: 640x480 59.940476 Hz 4:3 31.469 kHz 25.175000 MHz
+ * Standard Timings: none
+ * Detailed Timing Descriptors:
+ * DTD 1: 3840x2160 60.000000 Hz 16:9 135.000 kHz 594.000000 MHz (1600 mm x 900 mm)
+ * Hfront 176 Hsync 88 Hback 296 Hpol P
+ * Vfront 8 Vsync 10 Vback 72 Vpol P
+ * Display Product Name: 'Test EDID'
+ * Display Range Limits:
+ * Monitor ranges (GTF): 24-85 Hz V, 24-140 kHz H, max dotclock 600 MHz
+ * Dummy Descriptor:
+ * Extension blocks: 1
+ * Checksum: 0xa9
+ *
+ * ----------------
+ *
+ * Block 1, CTA-861 Extension Block:
+ * Revision: 3
+ * Underscans IT Video Formats by default
+ * Supports YCbCr 4:4:4
+ * Supports YCbCr 4:2:2
+ * Native detailed modes: 1
+ * Video Data Block:
+ * VIC 97: 3840x2160 60.000000 Hz 16:9 135.000 kHz 594.000000 MHz
+ * Vendor-Specific Data Block (HDMI), OUI 00-0C-03:
+ * Source physical address: 1.0.0.0
+ * DC_48bit
+ * DC_36bit
+ * DC_30bit
+ * DC_Y444
+ * Maximum TMDS clock: 0 MHz
+ * Extended HDMI video details:
+ * Vendor-Specific Data Block (HDMI Forum), OUI C4-5D-D8:
+ * Version: 1
+ * Maximum TMDS Character Rate: 600 MHz
+ * SCDC Present
+ * Supports 16-bits/component Deep Color 4:2:0 Pixel Encoding
+ * Supports 12-bits/component Deep Color 4:2:0 Pixel Encoding
+ * Supports 10-bits/component Deep Color 4:2:0 Pixel Encoding
+ * VRRmin: 0 Hz
+ * VRRmax: 0 Hz
+ * Video Capability Data Block:
+ * YCbCr quantization: Selectable (via AVI YQ)
+ * RGB quantization: Selectable (via AVI Q)
+ * PT scan behavior: No Data
+ * IT scan behavior: Always Underscanned
+ * CE scan behavior: Always Underscanned
+ * YCbCr 4:2:0 Capability Map Data Block:
+ * VIC 97: 3840x2160 60.000000 Hz 16:9 135.000 kHz 594.000000 MHz
+ * Checksum: 0x54 Unused space in Extension Block: 87 bytes
+ *
+ * ----------------
+ *
+ * edid-decode 1.33.0
+ *
+ * EDID conformity: PASS
+ */
+const unsigned char test_edid_hdmi_4k_rgb_yuv420_dc_max_600mhz[] = {
+ 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x34, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x23, 0x01, 0x03, 0x80, 0xa0, 0x5a, 0x78,
+ 0x0f, 0xee, 0x91, 0xa3, 0x54, 0x4c, 0x99, 0x26, 0x0f, 0x50, 0x54, 0x20,
+ 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x08, 0xe8, 0x00, 0x30, 0xf2, 0x70,
+ 0x5a, 0x80, 0xb0, 0x58, 0x8a, 0x00, 0x40, 0x84, 0x63, 0x00, 0x00, 0x1e,
+ 0x00, 0x00, 0x00, 0xfc, 0x00, 0x54, 0x65, 0x73, 0x74, 0x20, 0x45, 0x44,
+ 0x49, 0x44, 0x0a, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x18,
+ 0x55, 0x18, 0x8c, 0x3c, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xa9, 0x02, 0x03, 0x28, 0xb1,
+ 0x41, 0x61, 0x6c, 0x03, 0x0c, 0x00, 0x10, 0x00, 0x78, 0x00, 0x20, 0x00,
+ 0x00, 0x01, 0x03, 0x6d, 0xd8, 0x5d, 0xc4, 0x01, 0x78, 0x80, 0x07, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0xe2, 0x00, 0xca, 0xe3, 0x0f, 0x01, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x54,
+};
+EXPORT_SYMBOL(test_edid_hdmi_4k_rgb_yuv420_dc_max_600mhz);
+
MODULE_AUTHOR("Maxime Ripard <mripard@kernel.org>");
MODULE_DESCRIPTION("EDID Definitions for KUnit tests");
MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/tests/drm_kunit_edid.h b/drivers/gpu/drm/tests/drm_kunit_edid.h
index 28b4df93a555..fb5b0295e35e 100644
--- a/drivers/gpu/drm/tests/drm_kunit_edid.h
+++ b/drivers/gpu/drm/tests/drm_kunit_edid.h
@@ -12,5 +12,6 @@ extern const unsigned char test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz[256];
extern const unsigned char test_edid_hdmi_1080p_rgb_yuv_dc_max_340mhz[256];
extern const unsigned char test_edid_hdmi_1080p_rgb_yuv_4k_yuv420_dc_max_200mhz[256];
extern const unsigned char test_edid_hdmi_4k_rgb_yuv420_dc_max_340mhz[256];
+extern const unsigned char test_edid_hdmi_4k_rgb_yuv420_dc_max_600mhz[256];
#endif // DRM_KUNIT_EDID_H_
--
2.55.0
next prev parent reply other threads:[~2026-09-01 18:51 UTC|newest]
Thread overview: 93+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-01 18:50 [PATCH v11 00/74] Add HDMI 2.0 support to DW HDMI QP TX Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 01/74] video/hdmi: Introduce HDMI version enum Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 02/74] drm/connector: hdmi: Handle reset() state allocation failure Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 03/74] drm/display: hdmi: Rename drmm_connector_hdmi_init() to *_ini2() Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 04/74] drm/connector: Add drmm_connector_hdmi_init() with new signature Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 05/74] drm/display: bridge_connector: Convert to drmm_connector_hdmi_init() Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 06/74] drm/probe-helper: Introduce .force_ctx() connector callback Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 07/74] drm/connector: Add HDMI 2.0 scrambler infrastructure Cristian Ciocaltea
2026-09-08 12:27 ` Maxime Ripard
2026-09-01 18:50 ` [PATCH v11 08/74] drm/display: scdc-helper: Add macro for connector-prefixed debug messages Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 09/74] drm/display: scdc-helper: Add helper to set SCDC version information Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 10/74] drm/display: hdmi: Add HDMI 2.0 scrambling management helpers Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 11/74] drm/display: hdmi: Advertise SCDC source version when scrambling Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 12/74] drm/bridge: Fix unlocked list_del in drm_bridge_add() Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 13/74] drm/bridge: Fix NULL deref in drm_bridge_add() for legacy bridges Cristian Ciocaltea
2026-09-08 9:24 ` Maxime Ripard
2026-09-01 18:50 ` [PATCH v11 14/74] drm/bridge: Fix unlocked list access in drm_bridge_attach() Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 15/74] drm/bridge: Remove redundant error check in drm_bridge_helper_reset_crtc() Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 16/74] drm/bridge: Add bridge ops for source-side HDMI 2.0 scrambling Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 17/74] drm/display: bridge_connector: Use cached connector status in .get_modes() Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 18/74] drm/display: bridge_connector: Switch to .detect_ctx() connector helper Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 19/74] drm/display: bridge_connector: Wire up HDMI 2.0 scrambler callbacks Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 20/74] drm/display: hdmi-state-helper: Add source TMDS rate validation Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 21/74] drm/display: hdmi-state-helper: Pass acquire ctx to hotplug helpers Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 22/74] drm/display: hdmi-state-helper: Add drm_atomic_helper_connector_hdmi_force_ctx() Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 23/74] drm/display: hdmi-state-helper: Sync SCDC state on hotplug Cristian Ciocaltea
2026-09-08 12:48 ` Maxime Ripard
2026-09-01 18:50 ` [PATCH v11 24/74] drm/display: hdmi-state-helper: Set HDMI scrambling requirement Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 25/74] drm/display: bridge_connector: Switch to .force_ctx() connector helper Cristian Ciocaltea
2026-09-08 9:53 ` Maxime Ripard
2026-09-01 18:50 ` [PATCH v11 26/74] drm/bridge: dw-hdmi-qp: Rate limit i2c read error messages Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 27/74] drm/bridge: dw-hdmi-qp: Provide .{enable,disable}_hpd() PHY ops Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 28/74] drm/bridge: dw-hdmi-qp: Remove unused workqueue include and define Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 29/74] drm/bridge: dw-hdmi-qp: Add HDMI 2.0 scrambling support Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 30/74] drm/bridge: dw-hdmi-qp: Provide dw_hdmi_qp_hpd_notify() helper Cristian Ciocaltea
2026-09-08 12:48 ` Maxime Ripard
2026-09-01 18:50 ` [PATCH v11 31/74] drm/rockchip: dw_hdmi_qp: Fix invalid drvdata access in PM ops Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 32/74] drm/rockchip: dw_hdmi_qp: Cancel pending HPD work on suspend Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 33/74] drm/rockchip: dw_hdmi_qp: Add missing newlines in dev_err_probe() messages Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 34/74] drm/rockchip: dw_hdmi_qp: Use local dev variable consistently in bind() Cristian Ciocaltea
2026-09-01 18:50 ` [PATCH v11 35/74] drm/rockchip: dw_hdmi_qp: Avoid spurious HPD IRQ thread wakeups Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 36/74] drm/rockchip: dw_hdmi_qp: Mask RK3576 HPD IRQ in io_init Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 37/74] drm/rockchip: dw_hdmi_qp: Implement .{enable,disable}_hpd() PHY ops Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 38/74] drm/rockchip: dw_hdmi_qp: Factor out HPD interrupt (un)mask helpers Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 39/74] drm/rockchip: dw_hdmi_qp: Control the HPD IRQ line via the bridge HPD ops Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 40/74] drm/rockchip: dw_hdmi_qp: Use dw_hdmi_qp_hpd_notify() for HPD reports Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 41/74] drm/bridge: dw-hdmi-qp: Drop unused .setup_hpd() phy op Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 42/74] drm/vc4: hdmi: Use common TMDS char rate constants Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 43/74] drm/vc4: hdmi: Switch to drm_hdmi_mode_needs_scrambling() Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 44/74] drm/vc4: hdmi: Switch to .force_ctx() connector helper Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 45/74] drm/vc4: hdmi: Propagate -EDEADLK to the top level Cristian Ciocaltea
2026-09-08 13:04 ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 46/74] drm/vc4: hdmi: Convert to drmm_connector_hdmi_init() Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 47/74] drm/vc4: hdmi: Convert to common HDMI 2.0 scrambling infrastructure Cristian Ciocaltea
2026-09-08 13:05 ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 48/74] drm/vc4: hdmi: Defer pixel clock validation to HDMI helpers Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 49/74] drm/display: hdmi-state-helper: Drop drm_atomic_helper_connector_hdmi_force() Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 50/74] drm/bridge: adv7511: Advertise HDMI 1.2 capabilities Cristian Ciocaltea
2026-09-08 9:58 ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 51/74] drm/bridge: inno-hdmi: " Cristian Ciocaltea
2026-09-08 9:58 ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 52/74] drm/bridge: ite-it6263: Drop redundant .mode_valid hook Cristian Ciocaltea
2026-09-08 9:59 ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 53/74] drm/bridge: ite-it6263: Advertise HDMI 1.3 capabilities Cristian Ciocaltea
2026-09-08 11:45 ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 54/74] drm/bridge: ite-it66121: Advertise HDMI 1.2 capabilities Cristian Ciocaltea
2026-09-08 11:46 ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 55/74] drm/bridge: lontium-lt9611: Advertise HDMI 1.4 capabilities Cristian Ciocaltea
2026-09-08 11:46 ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 56/74] drm/rockchip: rk3066_hdmi: " Cristian Ciocaltea
2026-09-08 11:46 ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 57/74] drm/sun4i: hdmi: Convert to drmm_connector_hdmi_init() Cristian Ciocaltea
2026-09-01 18:51 ` Cristian Ciocaltea [this message]
2026-09-01 18:51 ` [PATCH v11 59/74] drm/tests: edid: Fix conformity for 1080p+4K YUV420 200MHz EDID Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 60/74] drm/tests: edid: Fix conformity for 4K RGB/YUV 340MHz EDID Cristian Ciocaltea
2026-09-08 11:47 ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 61/74] drm/tests: bridge: Set supported HDMI version Cristian Ciocaltea
2026-09-08 11:47 ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 62/74] drm/tests: connector: Convert to drmm_connector_hdmi_init() Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 63/74] drm/tests: connector: Add HDMI max_tmds_char_rate init coverage Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 64/74] drm/tests: connector: Add HDMI source-side scrambler coverage Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 65/74] drm/tests: hdmi_state_helper: Convert to drmm_connector_hdmi_init() Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 66/74] drm/tests: hdmi_state_helper: Add connector-provided max_tmds_char_rate coverage Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 67/74] drm/tests: hdmi_state_helper: Cover source-side scrambling decision Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 68/74] drm/connector: Remove drmm_connector_hdmi_ini2() Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 69/74] drm/connector: Drop redundant hdmi vendor/product fields Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 70/74] drm/connector: Drop redundant hdmi supported_formats field Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 71/74] drm/connector: Drop redundant max_bpc field Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 72/74] video/hdmi: Define SPD InfoFrame field lengths and use strtomem_pad() Cristian Ciocaltea
2026-09-01 18:51 ` [PATCH v11 73/74] drm/connector: Use the SPD InfoFrame field length defines Cristian Ciocaltea
2026-09-08 12:17 ` Maxime Ripard
2026-09-01 18:51 ` [PATCH v11 74/74] drm/tests: hdmi: Add SPD InfoFrame vendor/product coverage Cristian Ciocaltea
2026-09-08 9:48 ` [PATCH v11 00/74] Add HDMI 2.0 support to DW HDMI QP TX Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260901-dw-hdmi-qp-scramb-v11-58-bc12954a0688@collabora.com \
--to=cristian.ciocaltea@collabora.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=airlied@gmail.com \
--cc=algea.cao@rock-chips.com \
--cc=andrzej.hajda@intel.com \
--cc=andy.yan@rock-chips.com \
--cc=daniels@collabora.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=deller@gmx.de \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=kernel-list@raspberrypi.com \
--cc=kernel@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=luca.ceresoli@bootlin.com \
--cc=lumag@kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mcanal@igalia.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=ple@baylibre.com \
--cc=rfoss@kernel.org \
--cc=rgallaispou@gmail.com \
--cc=samuel@sholland.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
--cc=victor.liu@nxp.com \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox