* [PATCH 1/3] backlight: ktd253: Initialize properties before device registration
@ 2026-11-19 23:07 Thorsten Blum
2026-11-19 23:07 ` [PATCH 2/3] backlight: ktd2801: " Thorsten Blum
2026-11-19 23:07 ` [PATCH 3/3] backlight: aat2870: " Thorsten Blum
0 siblings, 2 replies; 3+ messages in thread
From: Thorsten Blum @ 2026-11-19 23:07 UTC (permalink / raw)
To: Lee Jones, Daniel Thompson, Jingoo Han, Helge Deller,
Linus Walleij, Duje Mihanović, Jin Park, Samuel Ortiz
Cc: dri-devel, linux-fbdev, Thorsten Blum
The backlight API requires max_brightness to be supplied at device
registration and not to be modified afterwards. KTD253 currently sets it
after registering the device, allowing userspace to read a maximum
brightness of 0 before the configured value is applied.
Pass the initial brightness, maximum brightness, and power state to
devm_backlight_device_register() to set them before the sysfs attributes
become visible to userspace.
Fixes: 5317f37e48b9 ("backlight: Add Kinetic KTD253 backlight driver")
Signed-off-by: Thorsten Blum <blum@kernel.org>
---
drivers/video/backlight/ktd253-backlight.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/video/backlight/ktd253-backlight.c b/drivers/video/backlight/ktd253-backlight.c
index 8091c7e085e8..5fc29c858a4b 100644
--- a/drivers/video/backlight/ktd253-backlight.c
+++ b/drivers/video/backlight/ktd253-backlight.c
@@ -141,6 +141,9 @@ static const struct backlight_ops ktd253_backlight_ops = {
static int ktd253_backlight_probe(struct platform_device *pdev)
{
+ struct backlight_properties props = {
+ .type = BACKLIGHT_RAW,
+ };
struct device *dev = &pdev->dev;
struct backlight_device *bl;
struct ktd253_backlight *ktd253;
@@ -179,21 +182,16 @@ static int ktd253_backlight_probe(struct platform_device *pdev)
/* Bring backlight to a known off state */
msleep(KTD253_T_OFF_MS);
+ props.max_brightness = max_brightness;
+ props.brightness = brightness;
+ props.power = brightness ? BACKLIGHT_POWER_ON : BACKLIGHT_POWER_OFF;
+
bl = devm_backlight_device_register(dev, dev_name(dev), dev, ktd253,
- &ktd253_backlight_ops, NULL);
+ &ktd253_backlight_ops, &props);
if (IS_ERR(bl)) {
dev_err(dev, "failed to register backlight\n");
return PTR_ERR(bl);
}
- bl->props.max_brightness = max_brightness;
- /* When we just enable the GPIO line we set max brightness */
- if (brightness) {
- bl->props.brightness = brightness;
- bl->props.power = BACKLIGHT_POWER_ON;
- } else {
- bl->props.brightness = 0;
- bl->props.power = BACKLIGHT_POWER_OFF;
- }
ktd253->bl = bl;
platform_set_drvdata(pdev, bl);
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/3] backlight: ktd2801: Initialize properties before device registration
2026-11-19 23:07 [PATCH 1/3] backlight: ktd253: Initialize properties before device registration Thorsten Blum
@ 2026-11-19 23:07 ` Thorsten Blum
2026-11-19 23:07 ` [PATCH 3/3] backlight: aat2870: " Thorsten Blum
1 sibling, 0 replies; 3+ messages in thread
From: Thorsten Blum @ 2026-11-19 23:07 UTC (permalink / raw)
To: Lee Jones, Daniel Thompson, Jingoo Han, Helge Deller,
Linus Walleij, Duje Mihanović, Jin Park, Samuel Ortiz
Cc: dri-devel, linux-fbdev, Thorsten Blum
The backlight API requires max_brightness to be supplied at device
registration and not to be modified afterwards. KTD2801 currently sets
it after registering the device, allowing userspace to read a maximum
brightness of 0 before the configured value is applied.
Pass the initial brightness and the maximum brightness to
devm_backlight_device_register() to set them before the sysfs attributes
become visible to userspace.
Fixes: a5554f1b5bc3 ("backlight: Add Kinetic KTD2801 Backlight support")
Signed-off-by: Thorsten Blum <blum@kernel.org>
---
drivers/video/backlight/ktd2801-backlight.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/video/backlight/ktd2801-backlight.c b/drivers/video/backlight/ktd2801-backlight.c
index c218ee55f253..ff149de36dee 100644
--- a/drivers/video/backlight/ktd2801-backlight.c
+++ b/drivers/video/backlight/ktd2801-backlight.c
@@ -58,6 +58,9 @@ static const struct backlight_ops ktd2801_backlight_ops = {
static int ktd2801_backlight_probe(struct platform_device *pdev)
{
+ struct backlight_properties props = {
+ .type = BACKLIGHT_RAW,
+ };
struct device *dev = &pdev->dev;
struct backlight_device *bd;
struct ktd2801_backlight *ktd2801;
@@ -92,15 +95,15 @@ static int ktd2801_backlight_probe(struct platform_device *pdev)
"failed to get backlight GPIO");
gpiod_set_consumer_name(ktd2801->props.ctrl_gpio, dev_name(dev));
+ props.max_brightness = max_brightness;
+ props.brightness = brightness;
+
bd = devm_backlight_device_register(dev, dev_name(dev), dev, ktd2801,
- &ktd2801_backlight_ops, NULL);
+ &ktd2801_backlight_ops, &props);
if (IS_ERR(bd))
return dev_err_probe(dev, PTR_ERR(bd),
"failed to register backlight");
- bd->props.max_brightness = max_brightness;
- bd->props.brightness = brightness;
-
ktd2801->bd = bd;
platform_set_drvdata(pdev, bd);
backlight_update_status(bd);
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 3/3] backlight: aat2870: Initialize properties before device registration
2026-11-19 23:07 [PATCH 1/3] backlight: ktd253: Initialize properties before device registration Thorsten Blum
2026-11-19 23:07 ` [PATCH 2/3] backlight: ktd2801: " Thorsten Blum
@ 2026-11-19 23:07 ` Thorsten Blum
1 sibling, 0 replies; 3+ messages in thread
From: Thorsten Blum @ 2026-11-19 23:07 UTC (permalink / raw)
To: Lee Jones, Daniel Thompson, Jingoo Han, Helge Deller,
Linus Walleij, Duje Mihanović, Jin Park, Samuel Ortiz
Cc: dri-devel, linux-fbdev, Thorsten Blum
The backlight API requires max_brightness to be supplied at device
registration and not to be modified afterwards. AAT2870 currently sets
it after registering the device, allowing userspace to read a maximum
brightness of 0 before the configured value is applied.
Pass the initial brightness and the maximum brightness to
devm_backlight_device_register() to set them before the sysfs attributes
become visible to userspace.
Fixes: 4b0d711be39f ("backlight: Add AAT2870 backlight driver")
Signed-off-by: Thorsten Blum <blum@kernel.org>
---
drivers/video/backlight/aat2870_bl.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/video/backlight/aat2870_bl.c b/drivers/video/backlight/aat2870_bl.c
index 5af36d3784f1..fa854827e558 100644
--- a/drivers/video/backlight/aat2870_bl.c
+++ b/drivers/video/backlight/aat2870_bl.c
@@ -99,7 +99,11 @@ static int aat2870_bl_probe(struct platform_device *pdev)
struct aat2870_bl_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct aat2870_bl_driver_data *aat2870_bl;
struct backlight_device *bd;
- struct backlight_properties props;
+ struct backlight_properties props = {
+ .type = BACKLIGHT_RAW,
+ .max_brightness = 255,
+ .power = BACKLIGHT_POWER_ON,
+ };
int ret = 0;
if (!pdata) {
@@ -120,9 +124,10 @@ static int aat2870_bl_probe(struct platform_device *pdev)
goto out;
}
- memset(&props, 0, sizeof(struct backlight_properties));
+ if (pdata->max_brightness > 0)
+ props.max_brightness = pdata->max_brightness;
+ props.brightness = props.max_brightness;
- props.type = BACKLIGHT_RAW;
bd = devm_backlight_device_register(&pdev->dev, "aat2870-backlight",
&pdev->dev, aat2870_bl, &aat2870_bl_ops,
&props);
@@ -148,14 +153,7 @@ static int aat2870_bl_probe(struct platform_device *pdev)
else
aat2870_bl->max_current = AAT2870_CURRENT_27_9;
- if (pdata->max_brightness > 0)
- bd->props.max_brightness = pdata->max_brightness;
- else
- bd->props.max_brightness = 255;
-
aat2870_bl->brightness = 0;
- bd->props.power = BACKLIGHT_POWER_ON;
- bd->props.brightness = bd->props.max_brightness;
ret = aat2870_bl_update_status(bd);
if (ret < 0) {
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-11-19 23:08 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-19 23:07 [PATCH 1/3] backlight: ktd253: Initialize properties before device registration Thorsten Blum
2026-11-19 23:07 ` [PATCH 2/3] backlight: ktd2801: " Thorsten Blum
2026-11-19 23:07 ` [PATCH 3/3] backlight: aat2870: " Thorsten Blum
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox