* [PATCH 03/13] ARM: remove riscpc
[not found] <20260908152808.3928630-1-arnd@kernel.org>
@ 2026-09-08 15:27 ` Arnd Bergmann
2026-09-09 8:04 ` Thomas Zimmermann
` (2 more replies)
2026-09-08 15:27 ` [PATCH 06/13] ARM: omap2: remove omap24xx support Arnd Bergmann
1 sibling, 3 replies; 20+ messages in thread
From: Arnd Bergmann @ 2026-09-08 15:27 UTC (permalink / raw)
To: Krzysztof Kozlowski, Alexandre Belloni, Linus Walleij,
Russell King
Cc: Drew Fustini, Arnd Bergmann, Rob Herring, Conor Dooley,
Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Vladimir Zapolskiy, Stefan Agner, Maxime Coquelin,
Alexandre Torgue, Aaro Koskinen, Andreas Kemnade, Kevin Hilman,
Roger Quadros, Tony Lindgren, Nicolas Ferre, Claudiu Beznea,
Andrew Lunn, Sebastian Hesselbarth, Gregory Clement,
Robert Jarzmik, Kristoffer Ericson, Ethan Nelson-Moore,
Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo,
Karl Mehltretter, David Hildenbrand (Arm), Nicolas Pitre,
linux-doc, linux-kernel, linux-arm-kernel, devicetree, imx,
linux-stm32, linux-omap, Ian Molton, Jens Axboe, Helge Deller,
Thomas Zimmermann, Paul E. McKenney, linux-block, linux-serial,
linux-fbdev
From: Arnd Bergmann <arnd@arndb.de>
The Acorn Risc PC is the oldest still support Arm machine in the kernel,
originally shipped with an ARMv3 ARM610 support in 1994, it later allowed
faster StrongARM CPUs.
The main limitation here is the CPU bus that does not allow 16-bit
wide data transfers and hence requires the kernel to be built with the
-march=armv3 compiler option that was discontinued in gcc-9.
As gcc-8 is barely supported for compiling the kernel, this one
will not see another LTS kernel release, so remove it now.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Helge Deller <deller@gmx.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Karl Mehltretter <kmehltretter@gmail.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: linux-block@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
MAINTAINERS | 20 -
arch/arm/Kconfig | 33 +-
arch/arm/Kconfig.debug | 8 +-
arch/arm/boot/bootp/Makefile | 2 -
arch/arm/boot/compressed/Makefile | 4 -
arch/arm/boot/compressed/font.c | 2 -
arch/arm/boot/compressed/head.S | 8 -
arch/arm/boot/compressed/ll_char_wr.S | 131 ---
arch/arm/configs/rpc_defconfig | 127 --
arch/arm/include/asm/ecard.h | 219 ----
arch/arm/include/asm/hardware/ioc.h | 69 --
arch/arm/include/asm/hardware/iomd.h | 182 ---
arch/arm/include/asm/hardware/memc.h | 23 -
arch/arm/include/asm/io.h | 5 +-
arch/arm/include/asm/memory.h | 3 -
arch/arm/kernel/head-common.S | 13 -
arch/arm/kernel/head.S | 12 -
arch/arm/lib/delay-loop.S | 4 -
arch/arm/mach-rpc/Kconfig | 24 -
arch/arm/mach-rpc/Makefile | 9 -
arch/arm/mach-rpc/dma.c | 393 -------
arch/arm/mach-rpc/ecard-loader.S | 40 -
arch/arm/mach-rpc/ecard.c | 1146 -------------------
arch/arm/mach-rpc/ecard.h | 66 --
arch/arm/mach-rpc/fiq.S | 18 -
arch/arm/mach-rpc/floppydma.S | 29 -
arch/arm/mach-rpc/include/mach/acornfb.h | 137 ---
arch/arm/mach-rpc/include/mach/hardware.h | 73 --
arch/arm/mach-rpc/include/mach/io.h | 28 -
arch/arm/mach-rpc/include/mach/irqs.h | 42 -
arch/arm/mach-rpc/include/mach/isa-dma.h | 26 -
arch/arm/mach-rpc/include/mach/memory.h | 32 -
arch/arm/mach-rpc/include/mach/uncompress.h | 181 ---
arch/arm/mach-rpc/io-acorn.S | 28 -
arch/arm/mach-rpc/irq.c | 226 ----
arch/arm/mach-rpc/riscpc.c | 225 ----
arch/arm/mach-rpc/time.c | 97 --
arch/arm/mm/mmu.c | 2 +-
block/partitions/Kconfig | 7 -
drivers/tty/vt/keyboard.c | 2 +-
lib/fonts/font_acorn_8x8.c | 4 -
41 files changed, 12 insertions(+), 3688 deletions(-)
delete mode 100644 arch/arm/boot/compressed/font.c
delete mode 100644 arch/arm/boot/compressed/ll_char_wr.S
delete mode 100644 arch/arm/configs/rpc_defconfig
delete mode 100644 arch/arm/include/asm/ecard.h
delete mode 100644 arch/arm/include/asm/hardware/ioc.h
delete mode 100644 arch/arm/include/asm/hardware/iomd.h
delete mode 100644 arch/arm/include/asm/hardware/memc.h
delete mode 100644 arch/arm/mach-rpc/Kconfig
delete mode 100644 arch/arm/mach-rpc/Makefile
delete mode 100644 arch/arm/mach-rpc/dma.c
delete mode 100644 arch/arm/mach-rpc/ecard-loader.S
delete mode 100644 arch/arm/mach-rpc/ecard.c
delete mode 100644 arch/arm/mach-rpc/ecard.h
delete mode 100644 arch/arm/mach-rpc/fiq.S
delete mode 100644 arch/arm/mach-rpc/floppydma.S
delete mode 100644 arch/arm/mach-rpc/include/mach/acornfb.h
delete mode 100644 arch/arm/mach-rpc/include/mach/hardware.h
delete mode 100644 arch/arm/mach-rpc/include/mach/io.h
delete mode 100644 arch/arm/mach-rpc/include/mach/irqs.h
delete mode 100644 arch/arm/mach-rpc/include/mach/isa-dma.h
delete mode 100644 arch/arm/mach-rpc/include/mach/memory.h
delete mode 100644 arch/arm/mach-rpc/include/mach/uncompress.h
delete mode 100644 arch/arm/mach-rpc/io-acorn.S
delete mode 100644 arch/arm/mach-rpc/irq.c
delete mode 100644 arch/arm/mach-rpc/riscpc.c
delete mode 100644 arch/arm/mach-rpc/time.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 4380d5660402..6e8fe7640064 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2350,12 +2350,6 @@ F: Documentation/devicetree/bindings/display/arm,malidp.yaml
F: Documentation/gpu/afbc.rst
F: drivers/gpu/drm/arm/
-ARM MFM AND FLOPPY DRIVERS
-M: Ian Molton <spyro@f2s.com>
-S: Maintained
-F: arch/arm/include/asm/floppy.h
-F: arch/arm/mach-rpc/floppydma.S
-
ARM PMU PROFILING AND DEBUGGING
M: Will Deacon <will@kernel.org>
M: Mark Rutland <mark.rutland@arm.com>
@@ -3494,20 +3488,6 @@ F: include/linux/soc/renesas/
N: rcar
K: \brenesas,
-ARM/RISCPC ARCHITECTURE
-M: Russell King <linux@armlinux.org.uk>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-W: http://www.armlinux.org.uk/
-F: arch/arm/include/asm/hardware/ioc.h
-F: arch/arm/include/asm/hardware/iomd.h
-F: arch/arm/include/asm/hardware/memc.h
-F: arch/arm/mach-rpc/
-F: drivers/net/ethernet/8390/etherh.c
-F: drivers/net/ethernet/i825xx/ether1*
-F: drivers/net/ethernet/seeq/ether3*
-F: drivers/scsi/arm/
-
ARM/Rockchip SoC support
M: Heiko Stuebner <heiko@sntech.de>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c3d6b8abc815..5770deca136d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -55,7 +55,7 @@ config ARM
select ARCH_WANT_LD_ORPHAN_WARN
select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
select BUILDTIME_TABLE_SORT if MMU
- select COMMON_CLK if !ARCH_RPC
+ select COMMON_CLK
select CLONE_BACKWARDS
select CPU_PM if SUSPEND || CPU_IDLE
select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
@@ -155,13 +155,13 @@ config ARM
select PCI_SYSCALL if PCI
select PERF_USE_VMALLOC
select RTC_LIB
- select SPARSE_IRQ if !ARCH_RPC
+ select SPARSE_IRQ
select SYS_SUPPORTS_APM_EMULATION
select THREAD_INFO_IN_TASK
select TIMER_OF if OF
select HAVE_ARCH_VMAP_STACK if MMU && ARM_HAS_GROUP_RELOCS
select TRACE_IRQFLAGS_SUPPORT if !CPU_V7M
- select USE_OF if !ARCH_RPC
+ select USE_OF
# Above selects are sorted alphabetically; please add new ones
# according to that. Thanks.
help
@@ -277,25 +277,11 @@ config ARM_PATCH_PHYS_VIRT
this feature (eg, building a kernel for a single machine) and
you need to shrink the kernel to the minimal size.
-config NEED_MACH_IO_H
- bool
- help
- Select this when mach/io.h is required to provide special
- definitions for this platform. The need for mach/io.h should
- be avoided when possible.
-
-config NEED_MACH_MEMORY_H
- bool
- help
- Select this when mach/memory.h is required to provide special
- definitions for this platform. The need for mach/memory.h should
- be avoided when possible.
-
config PHYS_OFFSET
hex "Physical address of main memory" if MMU
depends on !ARM_PATCH_PHYS_VIRT || !AUTO_ZRELADDR
default DRAM_BASE if !MMU
- default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
+ default 0x10000000 if ARCH_OMAP1
default 0xa0000000 if ARCH_PXA
default 0xc0000000 if ARCH_EP93XX
default 0
@@ -337,7 +323,7 @@ config ARCH_MMAP_RND_BITS_MAX
config ARCH_MULTIPLATFORM
bool "Require kernel to be portable to multiple machines" if EXPERT
- depends on MMU && !ARCH_RPC
+ depends on MMU
default y
help
In general, all Arm machines can be supported in a single
@@ -429,8 +415,6 @@ source "arch/arm/mach-qcom/Kconfig"
source "arch/arm/mach-realtek/Kconfig"
-source "arch/arm/mach-rpc/Kconfig"
-
source "arch/arm/mach-rockchip/Kconfig"
source "arch/arm/mach-s3c/Kconfig"
@@ -490,9 +474,6 @@ config ARCH_MPS2
This platform is scheduled for removal in early 2027
# Definitions to make life easier
-config ARCH_ACORN
- bool
-
config PLAT_ORION
bool
select CLKSRC_MMIO
@@ -1191,7 +1172,7 @@ config ARCH_SELECT_MEMORY_MODEL
def_bool y
config ARCH_FLATMEM_ENABLE
- def_bool !ARCH_RPC
+ def_bool y
config ARCH_SPARSEMEM_ENABLE
def_bool y
@@ -1594,7 +1575,7 @@ config ARCH_DEFAULT_CRASH_DUMP
config AUTO_ZRELADDR
bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM
- default !ARCH_RPC
+ default y
help
ZRELADDR is the physical address where the decompressed kernel
image will be placed. If AUTO_ZRELADDR is selected, the address
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index f2a80955b7a0..56c090840c5a 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1446,7 +1446,7 @@ config DEBUG_STM32_UART
config DEBUG_UART_FLOW_CONTROL
bool "Enable flow control (CTS) for the debug UART"
depends on DEBUG_LL
- default y if DEBUG_GEMINI || ARCH_RPC
+ default y if DEBUG_GEMINI
help
Some UART ports are connected to terminals that will use modem
control signals to indicate whether they are ready to receive text.
@@ -1516,7 +1516,7 @@ config DEBUG_UART_PL01X
# Compatibility options for 8250
config DEBUG_UART_8250
- def_bool ARCH_IXP4XX || ARCH_RPC
+ def_bool ARCH_IXP4XX
config DEBUG_UART_PHYS
hex "Physical base address of debug UART"
@@ -1527,7 +1527,6 @@ config DEBUG_UART_PHYS
default 0x01f02800 if DEBUG_SUNXI_R_UART
default 0x02530c00 if DEBUG_KEYSTONE_UART0
default 0x02531000 if DEBUG_KEYSTONE_UART1
- default 0x03010fe0 if ARCH_RPC
default 0x07000000 if DEBUG_SUN9I_UART0
default 0x09530000 if DEBUG_STIH418_SBC_ASC0
default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
@@ -1654,7 +1653,6 @@ config DEBUG_UART_VIRT
default 0xc881f000 if DEBUG_RV1108_UART2
default 0xc8821000 if DEBUG_RV1108_UART1
default 0xc8912000 if DEBUG_RV1108_UART0
- default 0xe0010fe0 if ARCH_RPC
default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
default 0xf0010000 if DEBUG_ASM9260_UART
default 0xf0100000 if DEBUG_DIGICOLOR_UA0
@@ -1779,7 +1777,6 @@ config DEBUG_UART_8250_PALMCHIP
config DEBUG_UNCOMPRESS
bool "Enable decompressor debugging via DEBUG_LL output"
depends on !ARCH_MULTIPLATFORM
- depends on !ARCH_RPC
depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
(!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
!DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING
@@ -1789,7 +1786,6 @@ config DEBUG_UNCOMPRESS
config UNCOMPRESS_INCLUDE
string
- default "mach/uncompress.h" if ARCH_RPC
default "debug/uncompress.h"
config EARLY_PRINTK
diff --git a/arch/arm/boot/bootp/Makefile b/arch/arm/boot/bootp/Makefile
index 12c61684b97f..1e47bf10069d 100644
--- a/arch/arm/boot/bootp/Makefile
+++ b/arch/arm/boot/bootp/Makefile
@@ -19,8 +19,6 @@ add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
PARAMS_PHYS := $(call add_hex, $(PHYS_OFFSET), 0x100)
# guess an initrd location if possible
-initrd_offset-$(CONFIG_ARCH_RPC) += 0x08000000
-INITRD_OFFSET := $(initrd_offset-y)
ifdef INITRD_OFFSET
INITRD_PHYS := $(call add_hex, $(PHYS_OFFSET), $(INITRD_OFFSET))
endif
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index d8d81ba741a2..32def10f5e03 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -25,10 +25,6 @@ endif
#
# Architecture dependencies
#
-ifeq ($(CONFIG_ARCH_ACORN),y)
-OBJS += ll_char_wr.o font.o
-endif
-
ifeq ($(CONFIG_CPU_XSCALE),y)
OBJS += head-xscale.o
endif
diff --git a/arch/arm/boot/compressed/font.c b/arch/arm/boot/compressed/font.c
deleted file mode 100644
index 46a677649db4..000000000000
--- a/arch/arm/boot/compressed/font.c
+++ /dev/null
@@ -1,2 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include "../../../../lib/fonts/font_acorn_8x8.c"
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 845abffbc2d6..af579905b630 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -668,14 +668,6 @@ LC1: .word .L_user_stack_end - LC1 @ sp
.Linflated_image_size_offset:
.long (input_data_end - 4) - .
-#ifdef CONFIG_ARCH_RPC
- .globl params
-params: ldr r0, =0x10000100 @ params_phys for RPC
- mov pc, lr
- .ltorg
- .align
-#endif
-
/*
* dcache_line_size - get the minimum D-cache line size from the CTR register
* on ARMv7.
diff --git a/arch/arm/boot/compressed/ll_char_wr.S b/arch/arm/boot/compressed/ll_char_wr.S
deleted file mode 100644
index 1ec8cb2898b1..000000000000
--- a/arch/arm/boot/compressed/ll_char_wr.S
+++ /dev/null
@@ -1,131 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/arm/lib/ll_char_wr.S
- *
- * Copyright (C) 1995, 1996 Russell King.
- *
- * Speedups & 1bpp code (C) 1996 Philip Blundell & Russell King.
- *
- * 10-04-96 RMK Various cleanups & reduced register usage.
- * 08-04-98 RMK Shifts re-ordered
- */
-
-@ Regs: [] = corruptible
-@ {} = used
-@ () = do not use
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
- .text
-
-LC0: .word LC0
- .word bytes_per_char_h
- .word video_size_row
- .word acorndata_8x8
- .word con_charconvtable
-
-/*
- * r0 = ptr
- * r1 = char
- * r2 = white
- */
-ENTRY(ll_write_char)
- stmfd sp!, {r4 - r7, lr}
-@
-@ Smashable regs: {r0 - r3}, [r4 - r7], (r8 - fp), [ip], (sp), [lr], (pc)
-@
- /*
- * calculate offset into character table
- */
- mov r1, r1, lsl #3
- /*
- * calculate offset required for each row.
- */
- adr ip, LC0
- ldmia ip, {r3, r4, r5, r6, lr}
- sub ip, ip, r3
- add r6, r6, ip
- add lr, lr, ip
- ldr r4, [r4, ip]
- ldr r5, [r5, ip]
- /*
- * Go to resolution-dependent routine...
- */
- cmp r4, #4
- blt Lrow1bpp
- add r0, r0, r5, lsl #3 @ Move to bottom of character
- orr r1, r1, #7
- ldrb r7, [r6, r1]
- teq r4, #8
- beq Lrow8bpplp
-@
-@ Smashable regs: {r0 - r3}, [r4], {r5 - r7}, (r8 - fp), [ip], (sp), {lr}, (pc)
-@
-Lrow4bpplp:
- ldr r7, [lr, r7, lsl #2]
- mul r7, r2, r7
- sub r1, r1, #1 @ avoid using r7 directly after
- str r7, [r0, -r5]!
- ldrb r7, [r6, r1]
- ldr r7, [lr, r7, lsl #2]
- mul r7, r2, r7
- tst r1, #7 @ avoid using r7 directly after
- str r7, [r0, -r5]!
- subne r1, r1, #1
- ldrbne r7, [r6, r1]
- bne Lrow4bpplp
- ldmfd sp!, {r4 - r7, pc}
-
-@
-@ Smashable regs: {r0 - r3}, [r4], {r5 - r7}, (r8 - fp), [ip], (sp), {lr}, (pc)
-@
-Lrow8bpplp:
- mov ip, r7, lsr #4
- ldr ip, [lr, ip, lsl #2]
- mul r4, r2, ip
- and ip, r7, #15 @ avoid r4
- ldr ip, [lr, ip, lsl #2] @ avoid r4
- mul ip, r2, ip @ avoid r4
- sub r1, r1, #1 @ avoid ip
- sub r0, r0, r5 @ avoid ip
- stmia r0, {r4, ip}
- ldrb r7, [r6, r1]
- mov ip, r7, lsr #4
- ldr ip, [lr, ip, lsl #2]
- mul r4, r2, ip
- and ip, r7, #15 @ avoid r4
- ldr ip, [lr, ip, lsl #2] @ avoid r4
- mul ip, r2, ip @ avoid r4
- tst r1, #7 @ avoid ip
- sub r0, r0, r5 @ avoid ip
- stmia r0, {r4, ip}
- subne r1, r1, #1
- ldrbne r7, [r6, r1]
- bne Lrow8bpplp
- ldmfd sp!, {r4 - r7, pc}
-
-@
-@ Smashable regs: {r0 - r3}, [r4], {r5, r6}, [r7], (r8 - fp), [ip], (sp), [lr], (pc)
-@
-Lrow1bpp:
- add r6, r6, r1
- ldmia r6, {r4, r7}
- strb r4, [r0], r5
- mov r4, r4, lsr #8
- strb r4, [r0], r5
- mov r4, r4, lsr #8
- strb r4, [r0], r5
- mov r4, r4, lsr #8
- strb r4, [r0], r5
- strb r7, [r0], r5
- mov r7, r7, lsr #8
- strb r7, [r0], r5
- mov r7, r7, lsr #8
- strb r7, [r0], r5
- mov r7, r7, lsr #8
- strb r7, [r0], r5
- ldmfd sp!, {r4 - r7, pc}
-
- .bss
-ENTRY(con_charconvtable)
- .space 1024
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
deleted file mode 100644
index edb52d56f679..000000000000
--- a/arch/arm/configs/rpc_defconfig
+++ /dev/null
@@ -1,127 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_RPC=y
-CONFIG_CPU_SA110=y
-CONFIG_FPE_NWFPE=y
-# CONFIG_AEABI is not set
-CONFIG_ATAGS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_BLK_DEV_FD=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_ARXESCSI=m
-CONFIG_SCSI_CUMANA_2=m
-CONFIG_SCSI_EESOXSCSI=m
-CONFIG_SCSI_POWERTECSCSI=y
-CONFIG_SCSI_CUMANA_1=m
-CONFIG_SCSI_OAK1=m
-CONFIG_ATA=y
-CONFIG_PATA_ICSIDE=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_ARM_ETHER1=y
-CONFIG_ARM_ETHER3=y
-CONFIG_ARM_ETHERH=y
-CONFIG_PPP=m
-CONFIG_PPPOE=m
-CONFIG_INPUT_EVDEV=y
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_MOUSE_RISCPC=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_LEGACY_PTY_COUNT=64
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=16
-CONFIG_SERIAL_8250_RUNTIME_UARTS=8
-CONFIG_SERIAL_8250_ACORN=y
-CONFIG_PRINTER=m
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_ACORN=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SOUND_PRIME=m
-CONFIG_SOUND_OSS=m
-CONFIG_SOUND_VIDC=m
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8583=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT4_FS=y
-CONFIG_AUTOFS_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_ADFS_FS=y
-CONFIG_NFS_FS=y
-# CONFIG_ACORN_PARTITION_CUMANA is not set
-# CONFIG_ACORN_PARTITION_EESOX is not set
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_FONTS=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_ACORN_8x8=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
diff --git a/arch/arm/include/asm/ecard.h b/arch/arm/include/asm/ecard.h
deleted file mode 100644
index 7cbe001bf9cc..000000000000
--- a/arch/arm/include/asm/ecard.h
+++ /dev/null
@@ -1,219 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/include/asm/ecard.h
- *
- * definitions for expansion cards
- *
- * This is a new system as from Linux 1.2.3
- *
- * Changelog:
- * 11-12-1996 RMK Further minor improvements
- * 12-09-1997 RMK Added interrupt enable/disable for card level
- *
- * Reference: Acorns Risc OS 3 Programmers Reference Manuals.
- */
-
-#ifndef __ASM_ECARD_H
-#define __ASM_ECARD_H
-
-/*
- * Currently understood cards (but not necessarily
- * supported):
- * Manufacturer Product ID
- */
-#define MANU_ACORN 0x0000
-#define PROD_ACORN_SCSI 0x0002
-#define PROD_ACORN_ETHER1 0x0003
-#define PROD_ACORN_MFM 0x000b
-
-#define MANU_ANT2 0x0011
-#define PROD_ANT_ETHER3 0x00a4
-
-#define MANU_ATOMWIDE 0x0017
-#define PROD_ATOMWIDE_3PSERIAL 0x0090
-
-#define MANU_IRLAM_INSTRUMENTS 0x001f
-#define MANU_IRLAM_INSTRUMENTS_ETHERN 0x5678
-
-#define MANU_OAK 0x0021
-#define PROD_OAK_SCSI 0x0058
-
-#define MANU_MORLEY 0x002b
-#define PROD_MORLEY_SCSI_UNCACHED 0x0067
-
-#define MANU_CUMANA 0x003a
-#define PROD_CUMANA_SCSI_2 0x003a
-#define PROD_CUMANA_SCSI_1 0x00a0
-
-#define MANU_ICS 0x003c
-#define PROD_ICS_IDE 0x00ae
-
-#define MANU_ICS2 0x003d
-#define PROD_ICS2_IDE 0x00ae
-
-#define MANU_SERPORT 0x003f
-#define PROD_SERPORT_DSPORT 0x00b9
-
-#define MANU_ARXE 0x0041
-#define PROD_ARXE_SCSI 0x00be
-
-#define MANU_I3 0x0046
-#define PROD_I3_ETHERLAN500 0x00d4
-#define PROD_I3_ETHERLAN600 0x00ec
-#define PROD_I3_ETHERLAN600A 0x011e
-
-#define MANU_ANT 0x0053
-#define PROD_ANT_ETHERM 0x00d8
-#define PROD_ANT_ETHERB 0x00e4
-
-#define MANU_ALSYSTEMS 0x005b
-#define PROD_ALSYS_SCSIATAPI 0x0107
-
-#define MANU_MCS 0x0063
-#define PROD_MCS_CONNECT32 0x0125
-
-#define MANU_EESOX 0x0064
-#define PROD_EESOX_SCSI2 0x008c
-
-#define MANU_YELLOWSTONE 0x0096
-#define PROD_YELLOWSTONE_RAPIDE32 0x0120
-
-#ifdef ECARD_C
-#define CONST
-#else
-#define CONST const
-#endif
-
-#define MAX_ECARDS 9
-
-struct ecard_id { /* Card ID structure */
- unsigned short manufacturer;
- unsigned short product;
- void *data;
-};
-
-struct in_ecid { /* Packed card ID information */
- unsigned short product; /* Product code */
- unsigned short manufacturer; /* Manufacturer code */
- unsigned char id:4; /* Simple ID */
- unsigned char cd:1; /* Chunk dir present */
- unsigned char is:1; /* Interrupt status pointers */
- unsigned char w:2; /* Width */
- unsigned char country; /* Country */
- unsigned char irqmask; /* IRQ mask */
- unsigned char fiqmask; /* FIQ mask */
- unsigned long irqoff; /* IRQ offset */
- unsigned long fiqoff; /* FIQ offset */
-};
-
-typedef struct expansion_card ecard_t;
-typedef unsigned long *loader_t;
-
-typedef struct expansion_card_ops { /* Card handler routines */
- void (*irqenable)(ecard_t *ec, int irqnr);
- void (*irqdisable)(ecard_t *ec, int irqnr);
- int (*irqpending)(ecard_t *ec);
- void (*fiqenable)(ecard_t *ec, int fiqnr);
- void (*fiqdisable)(ecard_t *ec, int fiqnr);
- int (*fiqpending)(ecard_t *ec);
-} expansioncard_ops_t;
-
-#define ECARD_NUM_RESOURCES (6)
-
-#define ECARD_RES_IOCSLOW (0)
-#define ECARD_RES_IOCMEDIUM (1)
-#define ECARD_RES_IOCFAST (2)
-#define ECARD_RES_IOCSYNC (3)
-#define ECARD_RES_MEMC (4)
-#define ECARD_RES_EASI (5)
-
-#define ecard_resource_start(ec,nr) ((ec)->resource[nr].start)
-#define ecard_resource_end(ec,nr) ((ec)->resource[nr].end)
-#define ecard_resource_len(ec,nr) ((ec)->resource[nr].end - \
- (ec)->resource[nr].start + 1)
-#define ecard_resource_flags(ec,nr) ((ec)->resource[nr].flags)
-
-/*
- * This contains all the info needed on an expansion card
- */
-struct expansion_card {
- struct expansion_card *next;
-
- struct device dev;
- struct resource resource[ECARD_NUM_RESOURCES];
-
- /* Public data */
- void __iomem *irqaddr; /* address of IRQ register */
- void __iomem *fiqaddr; /* address of FIQ register */
- unsigned char irqmask; /* IRQ mask */
- unsigned char fiqmask; /* FIQ mask */
- unsigned char claimed; /* Card claimed? */
- unsigned char easi; /* EASI card */
-
- void *irq_data; /* Data for use for IRQ by card */
- void *fiq_data; /* Data for use for FIQ by card */
- const expansioncard_ops_t *ops; /* Enable/Disable Ops for card */
-
- CONST unsigned int slot_no; /* Slot number */
- CONST unsigned int dma; /* DMA number (for request_dma) */
- CONST unsigned int irq; /* IRQ number (for request_irq) */
- CONST unsigned int fiq; /* FIQ number (for request_irq) */
- CONST struct in_ecid cid; /* Card Identification */
-
- /* Private internal data */
- const char *card_desc; /* Card description */
- CONST loader_t loader; /* loader program */
- u64 dma_mask;
-};
-
-void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data);
-
-struct in_chunk_dir {
- unsigned int start_offset;
- union {
- unsigned char string[256];
- unsigned char data[1];
- } d;
-};
-
-/*
- * Read a chunk from an expansion card
- * cd : where to put read data
- * ec : expansion card info struct
- * id : id number to find
- * num: (n+1)'th id to find.
- */
-extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num);
-
-/*
- * Request and release ecard resources
- */
-extern int ecard_request_resources(struct expansion_card *ec);
-extern void ecard_release_resources(struct expansion_card *ec);
-
-void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
- unsigned long offset, unsigned long maxsize);
-#define ecardm_iounmap(__ec, __addr) devm_iounmap(&(__ec)->dev, __addr)
-
-extern const struct bus_type ecard_bus_type;
-
-#define ECARD_DEV(_d) container_of((_d), struct expansion_card, dev)
-
-struct ecard_driver {
- int (*probe)(struct expansion_card *, const struct ecard_id *id);
- void (*remove)(struct expansion_card *);
- void (*shutdown)(struct expansion_card *);
- const struct ecard_id *id_table;
- unsigned int id;
- struct device_driver drv;
-};
-
-#define ECARD_DRV(_d) container_of((_d), struct ecard_driver, drv)
-
-#define ecard_set_drvdata(ec,data) dev_set_drvdata(&(ec)->dev, (data))
-#define ecard_get_drvdata(ec) dev_get_drvdata(&(ec)->dev)
-
-int ecard_register_driver(struct ecard_driver *);
-void ecard_remove_driver(struct ecard_driver *);
-
-#endif
diff --git a/arch/arm/include/asm/hardware/ioc.h b/arch/arm/include/asm/hardware/ioc.h
deleted file mode 100644
index 6edd27fcd048..000000000000
--- a/arch/arm/include/asm/hardware/ioc.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/include/asm/hardware/ioc.h
- *
- * Copyright (C) Russell King
- *
- * Use these macros to read/write the IOC. All it does is perform the actual
- * read/write.
- */
-#ifndef __ASMARM_HARDWARE_IOC_H
-#define __ASMARM_HARDWARE_IOC_H
-
-#ifndef __ASSEMBLY__
-
-/*
- * We use __raw_base variants here so that we give the compiler the
- * chance to keep IOC_BASE in a register.
- */
-#define ioc_readb(off) __raw_readb(IOC_BASE + (off))
-#define ioc_writeb(val,off) __raw_writeb(val, IOC_BASE + (off))
-
-#endif
-
-#define IOC_CONTROL (0x00)
-#define IOC_KARTTX (0x04)
-#define IOC_KARTRX (0x04)
-
-#define IOC_IRQSTATA (0x10)
-#define IOC_IRQREQA (0x14)
-#define IOC_IRQCLRA (0x14)
-#define IOC_IRQMASKA (0x18)
-
-#define IOC_IRQSTATB (0x20)
-#define IOC_IRQREQB (0x24)
-#define IOC_IRQMASKB (0x28)
-
-#define IOC_FIQSTAT (0x30)
-#define IOC_FIQREQ (0x34)
-#define IOC_FIQMASK (0x38)
-
-#define IOC_T0CNTL (0x40)
-#define IOC_T0LTCHL (0x40)
-#define IOC_T0CNTH (0x44)
-#define IOC_T0LTCHH (0x44)
-#define IOC_T0GO (0x48)
-#define IOC_T0LATCH (0x4c)
-
-#define IOC_T1CNTL (0x50)
-#define IOC_T1LTCHL (0x50)
-#define IOC_T1CNTH (0x54)
-#define IOC_T1LTCHH (0x54)
-#define IOC_T1GO (0x58)
-#define IOC_T1LATCH (0x5c)
-
-#define IOC_T2CNTL (0x60)
-#define IOC_T2LTCHL (0x60)
-#define IOC_T2CNTH (0x64)
-#define IOC_T2LTCHH (0x64)
-#define IOC_T2GO (0x68)
-#define IOC_T2LATCH (0x6c)
-
-#define IOC_T3CNTL (0x70)
-#define IOC_T3LTCHL (0x70)
-#define IOC_T3CNTH (0x74)
-#define IOC_T3LTCHH (0x74)
-#define IOC_T3GO (0x78)
-#define IOC_T3LATCH (0x7c)
-
-#endif
diff --git a/arch/arm/include/asm/hardware/iomd.h b/arch/arm/include/asm/hardware/iomd.h
deleted file mode 100644
index 53006ba5350f..000000000000
--- a/arch/arm/include/asm/hardware/iomd.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/include/asm/hardware/iomd.h
- *
- * Copyright (C) 1999 Russell King
- *
- * This file contains information out the IOMD ASIC used in the
- * Acorn RiscPC and subsequently integrated into the CLPS7500 chips.
- */
-#ifndef __ASMARM_HARDWARE_IOMD_H
-#define __ASMARM_HARDWARE_IOMD_H
-
-
-#ifndef __ASSEMBLY__
-
-/*
- * We use __raw_base variants here so that we give the compiler the
- * chance to keep IOC_BASE in a register.
- */
-#define iomd_readb(off) __raw_readb(IOMD_BASE + (off))
-#define iomd_readl(off) __raw_readl(IOMD_BASE + (off))
-#define iomd_writeb(val,off) __raw_writeb(val, IOMD_BASE + (off))
-#define iomd_writel(val,off) __raw_writel(val, IOMD_BASE + (off))
-
-#endif
-
-#define IOMD_CONTROL (0x000)
-#define IOMD_KARTTX (0x004)
-#define IOMD_KARTRX (0x004)
-#define IOMD_KCTRL (0x008)
-
-#define IOMD_IRQSTATA (0x010)
-#define IOMD_IRQREQA (0x014)
-#define IOMD_IRQCLRA (0x014)
-#define IOMD_IRQMASKA (0x018)
-
-#define IOMD_IRQSTATB (0x020)
-#define IOMD_IRQREQB (0x024)
-#define IOMD_IRQMASKB (0x028)
-
-#define IOMD_FIQSTAT (0x030)
-#define IOMD_FIQREQ (0x034)
-#define IOMD_FIQMASK (0x038)
-
-#define IOMD_T0CNTL (0x040)
-#define IOMD_T0LTCHL (0x040)
-#define IOMD_T0CNTH (0x044)
-#define IOMD_T0LTCHH (0x044)
-#define IOMD_T0GO (0x048)
-#define IOMD_T0LATCH (0x04c)
-
-#define IOMD_T1CNTL (0x050)
-#define IOMD_T1LTCHL (0x050)
-#define IOMD_T1CNTH (0x054)
-#define IOMD_T1LTCHH (0x054)
-#define IOMD_T1GO (0x058)
-#define IOMD_T1LATCH (0x05c)
-
-#define IOMD_ROMCR0 (0x080)
-#define IOMD_ROMCR1 (0x084)
-#ifdef CONFIG_ARCH_RPC
-#define IOMD_DRAMCR (0x088)
-#endif
-#define IOMD_REFCR (0x08C)
-
-#define IOMD_FSIZE (0x090)
-#define IOMD_ID0 (0x094)
-#define IOMD_ID1 (0x098)
-#define IOMD_VERSION (0x09C)
-
-#ifdef CONFIG_ARCH_RPC
-#define IOMD_MOUSEX (0x0A0)
-#define IOMD_MOUSEY (0x0A4)
-#endif
-
-#ifdef CONFIG_ARCH_RPC
-#define IOMD_DMATCR (0x0C0)
-#endif
-#define IOMD_IOTCR (0x0C4)
-#define IOMD_ECTCR (0x0C8)
-#ifdef CONFIG_ARCH_RPC
-#define IOMD_DMAEXT (0x0CC)
-#endif
-
-#ifdef CONFIG_ARCH_RPC
-#define DMA_EXT_IO0 1
-#define DMA_EXT_IO1 2
-#define DMA_EXT_IO2 4
-#define DMA_EXT_IO3 8
-
-#define IOMD_IO0CURA (0x100)
-#define IOMD_IO0ENDA (0x104)
-#define IOMD_IO0CURB (0x108)
-#define IOMD_IO0ENDB (0x10C)
-#define IOMD_IO0CR (0x110)
-#define IOMD_IO0ST (0x114)
-
-#define IOMD_IO1CURA (0x120)
-#define IOMD_IO1ENDA (0x124)
-#define IOMD_IO1CURB (0x128)
-#define IOMD_IO1ENDB (0x12C)
-#define IOMD_IO1CR (0x130)
-#define IOMD_IO1ST (0x134)
-
-#define IOMD_IO2CURA (0x140)
-#define IOMD_IO2ENDA (0x144)
-#define IOMD_IO2CURB (0x148)
-#define IOMD_IO2ENDB (0x14C)
-#define IOMD_IO2CR (0x150)
-#define IOMD_IO2ST (0x154)
-
-#define IOMD_IO3CURA (0x160)
-#define IOMD_IO3ENDA (0x164)
-#define IOMD_IO3CURB (0x168)
-#define IOMD_IO3ENDB (0x16C)
-#define IOMD_IO3CR (0x170)
-#define IOMD_IO3ST (0x174)
-#endif
-
-#define IOMD_SD0CURA (0x180)
-#define IOMD_SD0ENDA (0x184)
-#define IOMD_SD0CURB (0x188)
-#define IOMD_SD0ENDB (0x18C)
-#define IOMD_SD0CR (0x190)
-#define IOMD_SD0ST (0x194)
-
-#ifdef CONFIG_ARCH_RPC
-#define IOMD_SD1CURA (0x1A0)
-#define IOMD_SD1ENDA (0x1A4)
-#define IOMD_SD1CURB (0x1A8)
-#define IOMD_SD1ENDB (0x1AC)
-#define IOMD_SD1CR (0x1B0)
-#define IOMD_SD1ST (0x1B4)
-#endif
-
-#define IOMD_CURSCUR (0x1C0)
-#define IOMD_CURSINIT (0x1C4)
-
-#define IOMD_VIDCUR (0x1D0)
-#define IOMD_VIDEND (0x1D4)
-#define IOMD_VIDSTART (0x1D8)
-#define IOMD_VIDINIT (0x1DC)
-#define IOMD_VIDCR (0x1E0)
-
-#define IOMD_DMASTAT (0x1F0)
-#define IOMD_DMAREQ (0x1F4)
-#define IOMD_DMAMASK (0x1F8)
-
-#define DMA_END_S (1 << 31)
-#define DMA_END_L (1 << 30)
-
-#define DMA_CR_C 0x80
-#define DMA_CR_D 0x40
-#define DMA_CR_E 0x20
-
-#define DMA_ST_OFL 4
-#define DMA_ST_INT 2
-#define DMA_ST_AB 1
-
-/*
- * DMA (MEMC) compatibility
- */
-#define HALF_SAM vram_half_sam
-#define VDMA_ALIGNMENT (HALF_SAM * 2)
-#define VDMA_XFERSIZE (HALF_SAM)
-#define VDMA_INIT IOMD_VIDINIT
-#define VDMA_START IOMD_VIDSTART
-#define VDMA_END IOMD_VIDEND
-
-#ifndef __ASSEMBLY__
-extern unsigned int vram_half_sam;
-#define video_set_dma(start,end,offset) \
-do { \
- outl (SCREEN_START + start, VDMA_START); \
- outl (SCREEN_START + end - VDMA_XFERSIZE, VDMA_END); \
- if (offset >= end - VDMA_XFERSIZE) \
- offset |= 0x40000000; \
- outl (SCREEN_START + offset, VDMA_INIT); \
-} while (0)
-#endif
-
-#endif
diff --git a/arch/arm/include/asm/hardware/memc.h b/arch/arm/include/asm/hardware/memc.h
deleted file mode 100644
index 1d4ebe0a9678..000000000000
--- a/arch/arm/include/asm/hardware/memc.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/include/asm/hardware/memc.h
- *
- * Copyright (C) Russell King.
- */
-#define VDMA_ALIGNMENT PAGE_SIZE
-#define VDMA_XFERSIZE 16
-#define VDMA_INIT 0
-#define VDMA_START 1
-#define VDMA_END 2
-
-#ifndef __ASSEMBLY__
-extern void memc_write(unsigned int reg, unsigned long val);
-
-#define video_set_dma(start,end,offset) \
-do { \
- memc_write (VDMA_START, (start >> 2)); \
- memc_write (VDMA_END, (end - VDMA_XFERSIZE) >> 2); \
- memc_write (VDMA_INIT, (offset >> 2)); \
-} while (0)
-
-#endif
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index e6bd9e79737c..c3661af2ca2a 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -207,16 +207,13 @@ void __iomem *pci_remap_cfgspace(resource_size_t res_cookie, size_t size);
/*
* Now, pick up the machine-defined IO definitions
*/
-#ifdef CONFIG_NEED_MACH_IO_H
-#include <mach/io.h>
-#else
#if IS_ENABLED(CONFIG_PCMCIA) || defined(CONFIG_PCI)
#define IO_SPACE_LIMIT ((resource_size_t)0xfffff)
#else
#define IO_SPACE_LIMIT ((resource_size_t)0)
#endif
+
#define __io(a) __typesafe_io(PCI_IO_VIRT_BASE + ((a) & IO_SPACE_LIMIT))
-#endif
/*
* IO port access primitives
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 7c2fa7dcec6d..e10363ebdd1f 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -20,9 +20,6 @@
#include <linux/types.h>
#include <linux/sizes.h>
-#ifdef CONFIG_NEED_MACH_MEMORY_H
-#include <mach/memory.h>
-#endif
#include <asm/kasan_def.h>
/*
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 42cae73fcc19..3cbbcdb63f7d 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -221,19 +221,6 @@ str_p2: .asciz ").\n"
ENDPROC(__error_p)
__error:
-#ifdef CONFIG_ARCH_RPC
-/*
- * Turn the screen red on a error - RiscPC only.
- */
- mov r0, #0x02000000
- mov r3, #0x11
- orr r3, r3, r3, lsl #8
- orr r3, r3, r3, lsl #16
- str r3, [r0], #4
- str r3, [r0], #4
- str r3, [r0], #4
- str r3, [r0], #4
-#endif
1: mov r0, r0
b 1b
ENDPROC(__error)
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index b12fe41e579b..2ffaea2c4c9b 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -347,18 +347,6 @@ __create_page_tables:
/* we don't need any serial debugging mappings */
ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
#endif
-#ifdef CONFIG_ARCH_RPC
- /*
- * Map in screen at 0x02000000 & SCREEN2_BASE
- * Similar reasons here - for debug. This is
- * only for Acorn RiscPC architectures.
- */
- add r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
- orr r3, r7, #0x02000000
- str r3, [r0]
- add r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
- str r3, [r0]
-#endif
#endif
#ifdef CONFIG_ARM_LPAE
sub r4, r4, #0x1000 @ point to the PGD table
diff --git a/arch/arm/lib/delay-loop.S b/arch/arm/lib/delay-loop.S
index 33b08ca1c242..56f9eea56268 100644
--- a/arch/arm/lib/delay-loop.S
+++ b/arch/arm/lib/delay-loop.S
@@ -9,10 +9,6 @@
#include <asm/assembler.h>
#include <asm/delay.h>
-#ifdef CONFIG_ARCH_RPC
- .arch armv4
-#endif
-
.text
.LC0: .word loops_per_jiffy
diff --git a/arch/arm/mach-rpc/Kconfig b/arch/arm/mach-rpc/Kconfig
deleted file mode 100644
index 60b3823b690c..000000000000
--- a/arch/arm/mach-rpc/Kconfig
+++ /dev/null
@@ -1,24 +0,0 @@
-config ARCH_RPC
- bool "RiscPC (DEPRECATED)"
- depends on ARCH_MULTI_V4 && !(ARCH_MULTI_V4T || ARCH_MULTI_V5)
- depends on !(ARCH_FOOTBRIDGE || ARCH_SA1100 || ARCH_MOXART || ARCH_GEMINI)
- depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000
- depends on CPU_LITTLE_ENDIAN
- depends on ATAGS
- depends on MMU
- select ARCH_ACORN
- select ARCH_MAY_HAVE_PC_FDC
- select CPU_SA110
- select FIQ
- select HAVE_PATA_PLATFORM
- select ISA_DMA_API
- select LEGACY_TIMER_TICK
- select NEED_MACH_IO_H
- select NEED_MACH_MEMORY_H
- select NO_IOPORT_MAP
- help
- On the Acorn Risc-PC, Linux can support the internal IDE disk and
- CD-ROM interface, serial and parallel port, and the floppy drive.
-
- Support for these machines will go away in 2027,
- unless there are any remaining users that speak up.
diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile
deleted file mode 100644
index 90a645a18444..000000000000
--- a/arch/arm/mach-rpc/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y :=dma.o ecard.o ecard-loader.o fiq.o floppydma.o io-acorn.o irq.o \
- riscpc.o time.o
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
deleted file mode 100644
index 50e0f97afd75..000000000000
--- a/arch/arm/mach-rpc/dma.c
+++ /dev/null
@@ -1,393 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-rpc/dma.c
- *
- * Copyright (C) 1998 Russell King
- *
- * DMA functions specific to RiscPC architecture
- */
-#include <linux/mman.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/fiq.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <linux/uaccess.h>
-
-#include <asm/mach/dma.h>
-#include <asm/hardware/iomd.h>
-
-struct iomd_dma {
- struct dma_struct dma;
- void __iomem *base; /* Controller base address */
- int irq; /* Controller IRQ */
- unsigned int state;
- dma_addr_t cur_addr;
- unsigned int cur_len;
- dma_addr_t dma_addr;
- unsigned int dma_len;
-};
-
-#if 0
-typedef enum {
- dma_size_8 = 1,
- dma_size_16 = 2,
- dma_size_32 = 4,
- dma_size_128 = 16
-} dma_size_t;
-#endif
-
-#define TRANSFER_SIZE 2
-
-#define CURA (0)
-#define ENDA (IOMD_IO0ENDA - IOMD_IO0CURA)
-#define CURB (IOMD_IO0CURB - IOMD_IO0CURA)
-#define ENDB (IOMD_IO0ENDB - IOMD_IO0CURA)
-#define CR (IOMD_IO0CR - IOMD_IO0CURA)
-#define ST (IOMD_IO0ST - IOMD_IO0CURA)
-
-static void iomd_get_next_sg(struct iomd_dma *idma)
-{
- unsigned long end, offset, flags = 0;
-
- if (idma->dma.sg) {
- idma->cur_addr = idma->dma_addr;
- offset = idma->cur_addr & ~PAGE_MASK;
-
- end = offset + idma->dma_len;
-
- if (end > PAGE_SIZE)
- end = PAGE_SIZE;
-
- if (offset + TRANSFER_SIZE >= end)
- flags |= DMA_END_L;
-
- idma->cur_len = end - TRANSFER_SIZE;
-
- idma->dma_len -= end - offset;
- idma->dma_addr += end - offset;
-
- if (idma->dma_len == 0) {
- if (idma->dma.sgcount > 1) {
- idma->dma.sg = sg_next(idma->dma.sg);
- idma->dma_addr = idma->dma.sg->dma_address;
- idma->dma_len = idma->dma.sg->length;
- idma->dma.sgcount--;
- } else {
- idma->dma.sg = NULL;
- flags |= DMA_END_S;
- }
- }
- } else {
- flags = DMA_END_S | DMA_END_L;
- idma->cur_addr = 0;
- idma->cur_len = 0;
- }
-
- idma->cur_len |= flags;
-}
-
-static irqreturn_t iomd_dma_handle(int irq, void *dev_id)
-{
- struct iomd_dma *idma = dev_id;
- void __iomem *base = idma->base;
- unsigned int state = idma->state;
- unsigned int status, cur, end;
-
- do {
- status = readb(base + ST);
- if (!(status & DMA_ST_INT))
- goto out;
-
- if ((state ^ status) & DMA_ST_AB)
- iomd_get_next_sg(idma);
-
- // This efficiently implements state = OFL != AB ? AB : 0
- state = ((status >> 2) ^ status) & DMA_ST_AB;
- if (state) {
- cur = CURA;
- end = ENDA;
- } else {
- cur = CURB;
- end = ENDB;
- }
- writel(idma->cur_addr, base + cur);
- writel(idma->cur_len, base + end);
-
- if (status & DMA_ST_OFL &&
- idma->cur_len == (DMA_END_S|DMA_END_L))
- break;
- } while (1);
-
- state = ~DMA_ST_AB;
- disable_irq_nosync(irq);
-out:
- idma->state = state;
- return IRQ_HANDLED;
-}
-
-static int iomd_request_dma(unsigned int chan, dma_t *dma)
-{
- struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
-
- return request_irq(idma->irq, iomd_dma_handle,
- 0, idma->dma.device_id, idma);
-}
-
-static void iomd_free_dma(unsigned int chan, dma_t *dma)
-{
- struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
-
- free_irq(idma->irq, idma);
-}
-
-static struct device isa_dma_dev = {
- .init_name = "fallback device",
- .coherent_dma_mask = ~(dma_addr_t)0,
- .dma_mask = &isa_dma_dev.coherent_dma_mask,
-};
-
-static void iomd_enable_dma(unsigned int chan, dma_t *dma)
-{
- struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
- void __iomem *base = idma->base;
- unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E;
-
- if (idma->dma.invalid) {
- idma->dma.invalid = 0;
-
- /*
- * Cope with ISA-style drivers which expect cache
- * coherence.
- */
- if (!idma->dma.sg) {
- idma->dma.sg = &idma->dma.buf;
- idma->dma.sgcount = 1;
- idma->dma.buf.length = idma->dma.count;
- idma->dma.buf.dma_address = dma_map_single(&isa_dma_dev,
- idma->dma.addr, idma->dma.count,
- idma->dma.dma_mode == DMA_MODE_READ ?
- DMA_FROM_DEVICE : DMA_TO_DEVICE);
- }
-
- idma->dma_addr = idma->dma.sg->dma_address;
- idma->dma_len = idma->dma.sg->length;
-
- writeb(DMA_CR_C, base + CR);
- idma->state = DMA_ST_AB;
- }
-
- if (idma->dma.dma_mode == DMA_MODE_READ)
- ctrl |= DMA_CR_D;
-
- writeb(ctrl, base + CR);
- enable_irq(idma->irq);
-}
-
-static void iomd_disable_dma(unsigned int chan, dma_t *dma)
-{
- struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
- void __iomem *base = idma->base;
- unsigned long flags;
-
- local_irq_save(flags);
- if (idma->state != ~DMA_ST_AB)
- disable_irq(idma->irq);
- writeb(0, base + CR);
- local_irq_restore(flags);
-}
-
-static int iomd_set_dma_speed(unsigned int chan, dma_t *dma, int cycle)
-{
- int tcr, speed;
-
- if (cycle < 188)
- speed = 3;
- else if (cycle <= 250)
- speed = 2;
- else if (cycle < 438)
- speed = 1;
- else
- speed = 0;
-
- tcr = iomd_readb(IOMD_DMATCR);
- speed &= 3;
-
- switch (chan) {
- case DMA_0:
- tcr = (tcr & ~0x03) | speed;
- break;
-
- case DMA_1:
- tcr = (tcr & ~0x0c) | (speed << 2);
- break;
-
- case DMA_2:
- tcr = (tcr & ~0x30) | (speed << 4);
- break;
-
- case DMA_3:
- tcr = (tcr & ~0xc0) | (speed << 6);
- break;
-
- default:
- break;
- }
-
- iomd_writeb(tcr, IOMD_DMATCR);
-
- return speed;
-}
-
-static struct dma_ops iomd_dma_ops = {
- .type = "IOMD",
- .request = iomd_request_dma,
- .free = iomd_free_dma,
- .enable = iomd_enable_dma,
- .disable = iomd_disable_dma,
- .setspeed = iomd_set_dma_speed,
-};
-
-static struct fiq_handler fh = {
- .name = "floppydma"
-};
-
-struct floppy_dma {
- struct dma_struct dma;
- unsigned int fiq;
-};
-
-static void floppy_enable_dma(unsigned int chan, dma_t *dma)
-{
- struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma);
- void *fiqhandler_start;
- unsigned int fiqhandler_length;
- struct pt_regs regs;
-
- if (fdma->dma.sg)
- BUG();
-
- if (fdma->dma.dma_mode == DMA_MODE_READ) {
- extern unsigned char floppy_fiqin_start, floppy_fiqin_end;
- fiqhandler_start = &floppy_fiqin_start;
- fiqhandler_length = &floppy_fiqin_end - &floppy_fiqin_start;
- } else {
- extern unsigned char floppy_fiqout_start, floppy_fiqout_end;
- fiqhandler_start = &floppy_fiqout_start;
- fiqhandler_length = &floppy_fiqout_end - &floppy_fiqout_start;
- }
-
- regs.ARM_r9 = fdma->dma.count;
- regs.ARM_r10 = (unsigned long)fdma->dma.addr;
- regs.ARM_fp = (unsigned long)FLOPPYDMA_BASE;
-
- if (claim_fiq(&fh)) {
- printk("floppydma: couldn't claim FIQ.\n");
- return;
- }
-
- set_fiq_handler(fiqhandler_start, fiqhandler_length);
- set_fiq_regs(®s);
- enable_fiq(fdma->fiq);
-}
-
-static void floppy_disable_dma(unsigned int chan, dma_t *dma)
-{
- struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma);
- disable_fiq(fdma->fiq);
- release_fiq(&fh);
-}
-
-static int floppy_get_residue(unsigned int chan, dma_t *dma)
-{
- struct pt_regs regs;
- get_fiq_regs(®s);
- return regs.ARM_r9;
-}
-
-static struct dma_ops floppy_dma_ops = {
- .type = "FIQDMA",
- .enable = floppy_enable_dma,
- .disable = floppy_disable_dma,
- .residue = floppy_get_residue,
-};
-
-/*
- * This is virtual DMA - we don't need anything here.
- */
-static void sound_enable_disable_dma(unsigned int chan, dma_t *dma)
-{
-}
-
-static struct dma_ops sound_dma_ops = {
- .type = "VIRTUAL",
- .enable = sound_enable_disable_dma,
- .disable = sound_enable_disable_dma,
-};
-
-static struct iomd_dma iomd_dma[6];
-
-static struct floppy_dma floppy_dma = {
- .dma = {
- .d_ops = &floppy_dma_ops,
- },
- .fiq = FIQ_FLOPPYDATA,
-};
-
-static dma_t sound_dma = {
- .d_ops = &sound_dma_ops,
-};
-
-static int __init rpc_dma_init(void)
-{
- unsigned int i;
- int ret;
-
- iomd_writeb(0, IOMD_IO0CR);
- iomd_writeb(0, IOMD_IO1CR);
- iomd_writeb(0, IOMD_IO2CR);
- iomd_writeb(0, IOMD_IO3CR);
-
- iomd_writeb(0xa0, IOMD_DMATCR);
-
- /*
- * Setup DMA channels 2,3 to be for podules
- * and channels 0,1 for internal devices
- */
- iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT);
-
- iomd_dma[DMA_0].base = IOMD_BASE + IOMD_IO0CURA;
- iomd_dma[DMA_0].irq = IRQ_DMA0;
- iomd_dma[DMA_1].base = IOMD_BASE + IOMD_IO1CURA;
- iomd_dma[DMA_1].irq = IRQ_DMA1;
- iomd_dma[DMA_2].base = IOMD_BASE + IOMD_IO2CURA;
- iomd_dma[DMA_2].irq = IRQ_DMA2;
- iomd_dma[DMA_3].base = IOMD_BASE + IOMD_IO3CURA;
- iomd_dma[DMA_3].irq = IRQ_DMA3;
- iomd_dma[DMA_S0].base = IOMD_BASE + IOMD_SD0CURA;
- iomd_dma[DMA_S0].irq = IRQ_DMAS0;
- iomd_dma[DMA_S1].base = IOMD_BASE + IOMD_SD1CURA;
- iomd_dma[DMA_S1].irq = IRQ_DMAS1;
-
- for (i = DMA_0; i <= DMA_S1; i++) {
- iomd_dma[i].dma.d_ops = &iomd_dma_ops;
-
- ret = isa_dma_add(i, &iomd_dma[i].dma);
- if (ret)
- printk("IOMDDMA%u: unable to register: %d\n", i, ret);
- }
-
- ret = isa_dma_add(DMA_VIRTUAL_FLOPPY, &floppy_dma.dma);
- if (ret)
- printk("IOMDFLOPPY: unable to register: %d\n", ret);
- ret = isa_dma_add(DMA_VIRTUAL_SOUND, &sound_dma);
- if (ret)
- printk("IOMDSOUND: unable to register: %d\n", ret);
- return 0;
-}
-core_initcall(rpc_dma_init);
diff --git a/arch/arm/mach-rpc/ecard-loader.S b/arch/arm/mach-rpc/ecard-loader.S
deleted file mode 100644
index eb8ac0412da6..000000000000
--- a/arch/arm/mach-rpc/ecard-loader.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/arm/lib/ecard.S
- *
- * Copyright (C) 1995, 1996 Russell King
- *
- * 27/03/03 Ian Molton Clean up CONFIG_CPU
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-#define CPSR2SPSR(rt) \
- mrs rt, cpsr; \
- msr spsr_cxsf, rt
-
-@ Purpose: call an expansion card loader to read bytes.
-@ Proto : char read_loader(int offset, char *card_base, char *loader);
-@ Returns: byte read
-
-ENTRY(ecard_loader_read)
- stmfd sp!, {r4 - r12, lr}
- mov r11, r1
- mov r1, r0
- CPSR2SPSR(r0)
- mov lr, pc
- mov pc, r2
- ldmfd sp!, {r4 - r12, pc}
-
-@ Purpose: call an expansion card loader to reset the card
-@ Proto : void read_loader(int card_base, char *loader);
-@ Returns: byte read
-
-ENTRY(ecard_loader_reset)
- stmfd sp!, {r4 - r12, lr}
- mov r11, r0
- CPSR2SPSR(r0)
- mov lr, pc
- add pc, r1, #8
- ldmfd sp!, {r4 - r12, pc}
-
diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c
deleted file mode 100644
index 972465840548..000000000000
--- a/arch/arm/mach-rpc/ecard.c
+++ /dev/null
@@ -1,1146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/kernel/ecard.c
- *
- * Copyright 1995-2001 Russell King
- *
- * Find all installed expansion cards, and handle interrupts from them.
- *
- * Created from information from Acorns RiscOS3 PRMs
- *
- * 08-Dec-1996 RMK Added code for the 9'th expansion card - the ether
- * podule slot.
- * 06-May-1997 RMK Added blacklist for cards whose loader doesn't work.
- * 12-Sep-1997 RMK Created new handling of interrupt enables/disables
- * - cards can now register their own routine to control
- * interrupts (recommended).
- * 29-Sep-1997 RMK Expansion card interrupt hardware not being re-enabled
- * on reset from Linux. (Caused cards not to respond
- * under RiscOS without hard reset).
- * 15-Feb-1998 RMK Added DMA support
- * 12-Sep-1998 RMK Added EASI support
- * 10-Jan-1999 RMK Run loaders in a simulated RISC OS environment.
- * 17-Apr-1999 RMK Support for EASI Type C cycles.
- */
-#define ECARD_C
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/sched/mm.h>
-#include <linux/interrupt.h>
-#include <linux/completion.h>
-#include <linux/reboot.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/kthread.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/dma.h>
-#include <asm/ecard.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/mach/irq.h>
-#include <asm/tlbflush.h>
-
-#include "ecard.h"
-
-struct ecard_request {
- void (*fn)(struct ecard_request *);
- ecard_t *ec;
- unsigned int address;
- unsigned int length;
- unsigned int use_loader;
- void *buffer;
- struct completion *complete;
-};
-
-struct expcard_quirklist {
- unsigned short manufacturer;
- unsigned short product;
- const char *type;
- void (*init)(ecard_t *ec);
-};
-
-static ecard_t *cards;
-static ecard_t *slot_to_expcard[MAX_ECARDS];
-static unsigned int ectcr;
-
-static void atomwide_3p_quirk(ecard_t *ec);
-
-/* List of descriptions of cards which don't have an extended
- * identification, or chunk directories containing a description.
- */
-static struct expcard_quirklist quirklist[] __initdata = {
- { MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" },
- { MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, NULL, atomwide_3p_quirk },
-};
-
-asmlinkage extern int
-ecard_loader_reset(unsigned long base, loader_t loader);
-asmlinkage extern int
-ecard_loader_read(int off, unsigned long base, loader_t loader);
-
-static inline unsigned short ecard_getu16(unsigned char *v)
-{
- return v[0] | v[1] << 8;
-}
-
-static inline signed long ecard_gets24(unsigned char *v)
-{
- return v[0] | v[1] << 8 | v[2] << 16 | ((v[2] & 0x80) ? 0xff000000 : 0);
-}
-
-static inline ecard_t *slot_to_ecard(unsigned int slot)
-{
- return slot < MAX_ECARDS ? slot_to_expcard[slot] : NULL;
-}
-
-/* ===================== Expansion card daemon ======================== */
-/*
- * Since the loader programs on the expansion cards need to be run
- * in a specific environment, create a separate task with this
- * environment up, and pass requests to this task as and when we
- * need to.
- *
- * This should allow 99% of loaders to be called from Linux.
- *
- * From a security standpoint, we trust the card vendors. This
- * may be a misplaced trust.
- */
-static void ecard_task_reset(struct ecard_request *req)
-{
- struct expansion_card *ec = req->ec;
- struct resource *res;
-
- res = ec->slot_no == 8
- ? &ec->resource[ECARD_RES_MEMC]
- : ec->easi
- ? &ec->resource[ECARD_RES_EASI]
- : &ec->resource[ECARD_RES_IOCSYNC];
-
- ecard_loader_reset(res->start, ec->loader);
-}
-
-static void ecard_task_readbytes(struct ecard_request *req)
-{
- struct expansion_card *ec = req->ec;
- unsigned char *buf = req->buffer;
- unsigned int len = req->length;
- unsigned int off = req->address;
-
- if (ec->slot_no == 8) {
- void __iomem *base = (void __iomem *)
- ec->resource[ECARD_RES_MEMC].start;
-
- /*
- * The card maintains an index which increments the address
- * into a 4096-byte page on each access. We need to keep
- * track of the counter.
- */
- static unsigned int index;
- unsigned int page;
-
- page = (off >> 12) * 4;
- if (page > 256 * 4)
- return;
-
- off &= 4095;
-
- /*
- * If we are reading offset 0, or our current index is
- * greater than the offset, reset the hardware index counter.
- */
- if (off == 0 || index > off) {
- writeb(0, base);
- index = 0;
- }
-
- /*
- * Increment the hardware index counter until we get to the
- * required offset. The read bytes are discarded.
- */
- while (index < off) {
- readb(base + page);
- index += 1;
- }
-
- while (len--) {
- *buf++ = readb(base + page);
- index += 1;
- }
- } else {
- unsigned long base = (ec->easi
- ? &ec->resource[ECARD_RES_EASI]
- : &ec->resource[ECARD_RES_IOCSYNC])->start;
- void __iomem *pbase = (void __iomem *)base;
-
- if (!req->use_loader || !ec->loader) {
- off *= 4;
- while (len--) {
- *buf++ = readb(pbase + off);
- off += 4;
- }
- } else {
- while(len--) {
- /*
- * The following is required by some
- * expansion card loader programs.
- */
- *(unsigned long *)0x108 = 0;
- *buf++ = ecard_loader_read(off++, base,
- ec->loader);
- }
- }
- }
-
-}
-
-static DECLARE_WAIT_QUEUE_HEAD(ecard_wait);
-static struct ecard_request *ecard_req;
-static DEFINE_MUTEX(ecard_mutex);
-
-/*
- * Set up the expansion card daemon's page tables.
- */
-static void ecard_init_pgtables(struct mm_struct *mm)
-{
- struct vm_area_struct vma = TLB_FLUSH_VMA(mm, VM_EXEC);
-
- /* We want to set up the page tables for the following mapping:
- * Virtual Physical
- * 0x03000000 0x03000000
- * 0x03010000 unmapped
- * 0x03210000 0x03210000
- * 0x03400000 unmapped
- * 0x08000000 0x08000000
- * 0x10000000 unmapped
- *
- * FIXME: we don't follow this 100% yet.
- */
- pgd_t *src_pgd, *dst_pgd;
-
- src_pgd = pgd_offset(mm, (unsigned long)IO_BASE);
- dst_pgd = pgd_offset(mm, IO_START);
-
- memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (IO_SIZE / PGDIR_SIZE));
-
- src_pgd = pgd_offset(mm, (unsigned long)EASI_BASE);
- dst_pgd = pgd_offset(mm, EASI_START);
-
- memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
-
- flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);
- flush_tlb_range(&vma, EASI_START, EASI_START + EASI_SIZE);
-}
-
-static int ecard_init_mm(void)
-{
- struct mm_struct * mm = mm_alloc();
- struct mm_struct *active_mm = current->active_mm;
-
- if (!mm)
- return -ENOMEM;
-
- current->mm = mm;
- current->active_mm = mm;
- activate_mm(active_mm, mm);
- mmdrop_lazy_tlb(active_mm);
- ecard_init_pgtables(mm);
- return 0;
-}
-
-static int
-ecard_task(void * unused)
-{
- /*
- * Allocate a mm. We're not a lazy-TLB kernel task since we need
- * to set page table entries where the user space would be. Note
- * that this also creates the page tables. Failure is not an
- * option here.
- */
- if (ecard_init_mm())
- panic("kecardd: unable to alloc mm\n");
-
- while (1) {
- struct ecard_request *req;
-
- wait_event_interruptible(ecard_wait, ecard_req != NULL);
-
- req = xchg(&ecard_req, NULL);
- if (req != NULL) {
- req->fn(req);
- complete(req->complete);
- }
- }
-}
-
-/*
- * Wake the expansion card daemon to action our request.
- *
- * FIXME: The test here is not sufficient to detect if the
- * kcardd is running.
- */
-static void ecard_call(struct ecard_request *req)
-{
- DECLARE_COMPLETION_ONSTACK(completion);
-
- req->complete = &completion;
-
- mutex_lock(&ecard_mutex);
- ecard_req = req;
- wake_up(&ecard_wait);
-
- /*
- * Now wait for kecardd to run.
- */
- wait_for_completion(&completion);
- mutex_unlock(&ecard_mutex);
-}
-
-/* ======================= Mid-level card control ===================== */
-
-static void
-ecard_readbytes(void *addr, ecard_t *ec, int off, int len, int useld)
-{
- struct ecard_request req;
-
- req.fn = ecard_task_readbytes;
- req.ec = ec;
- req.address = off;
- req.length = len;
- req.use_loader = useld;
- req.buffer = addr;
-
- ecard_call(&req);
-}
-
-int ecard_readchunk(struct in_chunk_dir *cd, ecard_t *ec, int id, int num)
-{
- struct ex_chunk_dir excd;
- int index = 16;
- int useld = 0;
-
- if (!ec->cid.cd)
- return 0;
-
- while(1) {
- ecard_readbytes(&excd, ec, index, 8, useld);
- index += 8;
- if (c_id(&excd) == 0) {
- if (!useld && ec->loader) {
- useld = 1;
- index = 0;
- continue;
- }
- return 0;
- }
- if (c_id(&excd) == 0xf0) { /* link */
- index = c_start(&excd);
- continue;
- }
- if (c_id(&excd) == 0x80) { /* loader */
- if (!ec->loader) {
- ec->loader = kmalloc(c_len(&excd),
- GFP_KERNEL);
- if (ec->loader)
- ecard_readbytes(ec->loader, ec,
- (int)c_start(&excd),
- c_len(&excd), useld);
- else
- return 0;
- }
- continue;
- }
- if (c_id(&excd) == id && num-- == 0)
- break;
- }
-
- if (c_id(&excd) & 0x80) {
- switch (c_id(&excd) & 0x70) {
- case 0x70:
- ecard_readbytes((unsigned char *)excd.d.string, ec,
- (int)c_start(&excd), c_len(&excd),
- useld);
- break;
- case 0x00:
- break;
- }
- }
- cd->start_offset = c_start(&excd);
- memcpy(cd->d.string, excd.d.string, 256);
- return 1;
-}
-
-/* ======================= Interrupt control ============================ */
-
-static void ecard_def_irq_enable(ecard_t *ec, int irqnr)
-{
-}
-
-static void ecard_def_irq_disable(ecard_t *ec, int irqnr)
-{
-}
-
-static int ecard_def_irq_pending(ecard_t *ec)
-{
- return !ec->irqmask || readb(ec->irqaddr) & ec->irqmask;
-}
-
-static void ecard_def_fiq_enable(ecard_t *ec, int fiqnr)
-{
- panic("ecard_def_fiq_enable called - impossible");
-}
-
-static void ecard_def_fiq_disable(ecard_t *ec, int fiqnr)
-{
- panic("ecard_def_fiq_disable called - impossible");
-}
-
-static int ecard_def_fiq_pending(ecard_t *ec)
-{
- return !ec->fiqmask || readb(ec->fiqaddr) & ec->fiqmask;
-}
-
-static expansioncard_ops_t ecard_default_ops = {
- ecard_def_irq_enable,
- ecard_def_irq_disable,
- ecard_def_irq_pending,
- ecard_def_fiq_enable,
- ecard_def_fiq_disable,
- ecard_def_fiq_pending
-};
-
-/*
- * Enable and disable interrupts from expansion cards.
- * (interrupts are disabled for these functions).
- *
- * They are not meant to be called directly, but via enable/disable_irq.
- */
-static void ecard_irq_unmask(struct irq_data *d)
-{
- ecard_t *ec = irq_data_get_irq_chip_data(d);
-
- if (ec) {
- if (!ec->ops)
- ec->ops = &ecard_default_ops;
-
- if (ec->claimed && ec->ops->irqenable)
- ec->ops->irqenable(ec, d->irq);
- else
- printk(KERN_ERR "ecard: rejecting request to "
- "enable IRQs for %d\n", d->irq);
- }
-}
-
-static void ecard_irq_mask(struct irq_data *d)
-{
- ecard_t *ec = irq_data_get_irq_chip_data(d);
-
- if (ec) {
- if (!ec->ops)
- ec->ops = &ecard_default_ops;
-
- if (ec->ops && ec->ops->irqdisable)
- ec->ops->irqdisable(ec, d->irq);
- }
-}
-
-static struct irq_chip ecard_chip = {
- .name = "ECARD",
- .irq_ack = ecard_irq_mask,
- .irq_mask = ecard_irq_mask,
- .irq_unmask = ecard_irq_unmask,
-};
-
-void ecard_enablefiq(unsigned int fiqnr)
-{
- ecard_t *ec = slot_to_ecard(fiqnr);
-
- if (ec) {
- if (!ec->ops)
- ec->ops = &ecard_default_ops;
-
- if (ec->claimed && ec->ops->fiqenable)
- ec->ops->fiqenable(ec, fiqnr);
- else
- printk(KERN_ERR "ecard: rejecting request to "
- "enable FIQs for %d\n", fiqnr);
- }
-}
-
-void ecard_disablefiq(unsigned int fiqnr)
-{
- ecard_t *ec = slot_to_ecard(fiqnr);
-
- if (ec) {
- if (!ec->ops)
- ec->ops = &ecard_default_ops;
-
- if (ec->ops->fiqdisable)
- ec->ops->fiqdisable(ec, fiqnr);
- }
-}
-
-static void ecard_dump_irq_state(void)
-{
- ecard_t *ec;
-
- printk("Expansion card IRQ state:\n");
-
- for (ec = cards; ec; ec = ec->next) {
- const char *claimed;
-
- if (ec->slot_no == 8)
- continue;
-
- claimed = ec->claimed ? "" : "not ";
-
- if (ec->ops && ec->ops->irqpending &&
- ec->ops != &ecard_default_ops)
- printk(" %d: %sclaimed irq %spending\n",
- ec->slot_no, claimed,
- ec->ops->irqpending(ec) ? "" : "not ");
- else
- printk(" %d: %sclaimed irqaddr %p, mask = %02X, status = %02X\n",
- ec->slot_no, claimed,
- ec->irqaddr, ec->irqmask, readb(ec->irqaddr));
- }
-}
-
-static void ecard_check_lockup(struct irq_desc *desc)
-{
- static unsigned long last;
- static int lockup;
-
- /*
- * If the timer interrupt has not run since the last million
- * unrecognised expansion card interrupts, then there is
- * something seriously wrong. Disable the expansion card
- * interrupts so at least we can continue.
- *
- * Maybe we ought to start a timer to re-enable them some time
- * later?
- */
- if (last == jiffies) {
- lockup += 1;
- if (lockup > 1000000) {
- printk(KERN_ERR "\nInterrupt lockup detected - "
- "disabling all expansion card interrupts\n");
-
- desc->irq_data.chip->irq_mask(&desc->irq_data);
- ecard_dump_irq_state();
- }
- } else
- lockup = 0;
-
- /*
- * If we did not recognise the source of this interrupt,
- * warn the user, but don't flood the user with these messages.
- */
- if (!last || time_after(jiffies, last + 5*HZ)) {
- last = jiffies;
- printk(KERN_WARNING "Unrecognised interrupt from backplane\n");
- ecard_dump_irq_state();
- }
-}
-
-static void ecard_irq_handler(struct irq_desc *desc)
-{
- ecard_t *ec;
- int called = 0;
-
- desc->irq_data.chip->irq_mask(&desc->irq_data);
- for (ec = cards; ec; ec = ec->next) {
- int pending;
-
- if (!ec->claimed || !ec->irq || ec->slot_no == 8)
- continue;
-
- if (ec->ops && ec->ops->irqpending)
- pending = ec->ops->irqpending(ec);
- else
- pending = ecard_default_ops.irqpending(ec);
-
- if (pending) {
- generic_handle_irq(ec->irq);
- called ++;
- }
- }
- desc->irq_data.chip->irq_unmask(&desc->irq_data);
-
- if (called == 0)
- ecard_check_lockup(desc);
-}
-
-static void __iomem *__ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
-{
- void __iomem *address = NULL;
- int slot = ec->slot_no;
-
- if (ec->slot_no == 8)
- return ECARD_MEMC8_BASE;
-
- ectcr &= ~(1 << slot);
-
- switch (type) {
- case ECARD_MEMC:
- if (slot < 4)
- address = ECARD_MEMC_BASE + (slot << 14);
- break;
-
- case ECARD_IOC:
- if (slot < 4)
- address = ECARD_IOC_BASE + (slot << 14);
- else
- address = ECARD_IOC4_BASE + ((slot - 4) << 14);
- if (address)
- address += speed << 19;
- break;
-
- case ECARD_EASI:
- address = ECARD_EASI_BASE + (slot << 24);
- if (speed == ECARD_FAST)
- ectcr |= 1 << slot;
- break;
-
- default:
- break;
- }
-
-#ifdef IOMD_ECTCR
- iomd_writeb(ectcr, IOMD_ECTCR);
-#endif
- return address;
-}
-
-static int ecard_prints(struct seq_file *m, ecard_t *ec)
-{
- seq_printf(m, " %d: %s ", ec->slot_no, ec->easi ? "EASI" : " ");
-
- if (ec->cid.id == 0) {
- struct in_chunk_dir incd;
-
- seq_printf(m, "[%04X:%04X] ",
- ec->cid.manufacturer, ec->cid.product);
-
- if (!ec->card_desc && ec->cid.cd &&
- ecard_readchunk(&incd, ec, 0xf5, 0)) {
- ec->card_desc = kmalloc(strlen(incd.d.string)+1, GFP_KERNEL);
-
- if (ec->card_desc)
- strcpy((char *)ec->card_desc, incd.d.string);
- }
-
- seq_printf(m, "%s\n", ec->card_desc ? ec->card_desc : "*unknown*");
- } else
- seq_printf(m, "Simple card %d\n", ec->cid.id);
-
- return 0;
-}
-
-static int ecard_devices_proc_show(struct seq_file *m, void *v)
-{
- ecard_t *ec = cards;
-
- while (ec) {
- ecard_prints(m, ec);
- ec = ec->next;
- }
- return 0;
-}
-
-static struct proc_dir_entry *proc_bus_ecard_dir = NULL;
-
-static void ecard_proc_init(void)
-{
- proc_bus_ecard_dir = proc_mkdir("bus/ecard", NULL);
- proc_create_single("devices", 0, proc_bus_ecard_dir,
- ecard_devices_proc_show);
-}
-
-#define ec_set_resource(ec,nr,st,sz) \
- do { \
- (ec)->resource[nr].name = dev_name(&ec->dev); \
- (ec)->resource[nr].start = st; \
- (ec)->resource[nr].end = (st) + (sz) - 1; \
- (ec)->resource[nr].flags = IORESOURCE_MEM; \
- } while (0)
-
-static void __init ecard_free_card(struct expansion_card *ec)
-{
- int i;
-
- for (i = 0; i < ECARD_NUM_RESOURCES; i++)
- if (ec->resource[i].flags)
- release_resource(&ec->resource[i]);
-
- kfree(ec);
-}
-
-static struct expansion_card *__init ecard_alloc_card(int type, int slot)
-{
- struct expansion_card *ec;
- unsigned long base;
- int i;
-
- ec = kzalloc_obj(ecard_t);
- if (!ec) {
- ec = ERR_PTR(-ENOMEM);
- goto nomem;
- }
-
- ec->slot_no = slot;
- ec->easi = type == ECARD_EASI;
- ec->irq = 0;
- ec->fiq = 0;
- ec->dma = NO_DMA;
- ec->ops = &ecard_default_ops;
-
- dev_set_name(&ec->dev, "ecard%d", slot);
- ec->dev.parent = NULL;
- ec->dev.bus = &ecard_bus_type;
- ec->dev.dma_mask = &ec->dma_mask;
- ec->dma_mask = (u64)0xffffffff;
- ec->dev.coherent_dma_mask = ec->dma_mask;
-
- if (slot < 4) {
- ec_set_resource(ec, ECARD_RES_MEMC,
- PODSLOT_MEMC_BASE + (slot << 14),
- PODSLOT_MEMC_SIZE);
- base = PODSLOT_IOC0_BASE + (slot << 14);
- } else
- base = PODSLOT_IOC4_BASE + ((slot - 4) << 14);
-
-#ifdef CONFIG_ARCH_RPC
- if (slot < 8) {
- ec_set_resource(ec, ECARD_RES_EASI,
- PODSLOT_EASI_BASE + (slot << 24),
- PODSLOT_EASI_SIZE);
- }
-
- if (slot == 8) {
- ec_set_resource(ec, ECARD_RES_MEMC, NETSLOT_BASE, NETSLOT_SIZE);
- } else
-#endif
-
- for (i = 0; i <= ECARD_RES_IOCSYNC - ECARD_RES_IOCSLOW; i++)
- ec_set_resource(ec, i + ECARD_RES_IOCSLOW,
- base + (i << 19), PODSLOT_IOC_SIZE);
-
- for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
- if (ec->resource[i].flags &&
- request_resource(&iomem_resource, &ec->resource[i])) {
- dev_err(&ec->dev, "resource(s) not available\n");
- ec->resource[i].end -= ec->resource[i].start;
- ec->resource[i].start = 0;
- ec->resource[i].flags = 0;
- }
- }
-
- nomem:
- return ec;
-}
-
-static ssize_t irq_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct expansion_card *ec = ECARD_DEV(dev);
- return sprintf(buf, "%u\n", ec->irq);
-}
-static DEVICE_ATTR_RO(irq);
-
-static ssize_t dma_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct expansion_card *ec = ECARD_DEV(dev);
- return sprintf(buf, "%u\n", ec->dma);
-}
-static DEVICE_ATTR_RO(dma);
-
-static ssize_t resource_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct expansion_card *ec = ECARD_DEV(dev);
- char *str = buf;
- int i;
-
- for (i = 0; i < ECARD_NUM_RESOURCES; i++)
- str += sprintf(str, "%08x %08x %08lx\n",
- ec->resource[i].start,
- ec->resource[i].end,
- ec->resource[i].flags);
-
- return str - buf;
-}
-static DEVICE_ATTR_RO(resource);
-
-static ssize_t vendor_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct expansion_card *ec = ECARD_DEV(dev);
- return sprintf(buf, "%u\n", ec->cid.manufacturer);
-}
-static DEVICE_ATTR_RO(vendor);
-
-static ssize_t device_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct expansion_card *ec = ECARD_DEV(dev);
- return sprintf(buf, "%u\n", ec->cid.product);
-}
-static DEVICE_ATTR_RO(device);
-
-static ssize_t type_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct expansion_card *ec = ECARD_DEV(dev);
- return sprintf(buf, "%s\n", ec->easi ? "EASI" : "IOC");
-}
-static DEVICE_ATTR_RO(type);
-
-static struct attribute *ecard_dev_attrs[] = {
- &dev_attr_device.attr,
- &dev_attr_dma.attr,
- &dev_attr_irq.attr,
- &dev_attr_resource.attr,
- &dev_attr_type.attr,
- &dev_attr_vendor.attr,
- NULL,
-};
-ATTRIBUTE_GROUPS(ecard_dev);
-
-int ecard_request_resources(struct expansion_card *ec)
-{
- int i, err = 0;
-
- for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
- if (ecard_resource_end(ec, i) &&
- !request_mem_region(ecard_resource_start(ec, i),
- ecard_resource_len(ec, i),
- ec->dev.driver->name)) {
- err = -EBUSY;
- break;
- }
- }
-
- if (err) {
- while (i--)
- if (ecard_resource_end(ec, i))
- release_mem_region(ecard_resource_start(ec, i),
- ecard_resource_len(ec, i));
- }
- return err;
-}
-EXPORT_SYMBOL(ecard_request_resources);
-
-void ecard_release_resources(struct expansion_card *ec)
-{
- int i;
-
- for (i = 0; i < ECARD_NUM_RESOURCES; i++)
- if (ecard_resource_end(ec, i))
- release_mem_region(ecard_resource_start(ec, i),
- ecard_resource_len(ec, i));
-}
-EXPORT_SYMBOL(ecard_release_resources);
-
-void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data)
-{
- ec->irq_data = irq_data;
- barrier();
- ec->ops = ops;
-}
-EXPORT_SYMBOL(ecard_setirq);
-
-void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
- unsigned long offset, unsigned long maxsize)
-{
- unsigned long start = ecard_resource_start(ec, res);
- unsigned long end = ecard_resource_end(ec, res);
-
- if (offset > (end - start))
- return NULL;
-
- start += offset;
- if (maxsize && end - start > maxsize)
- end = start + maxsize;
-
- return devm_ioremap(&ec->dev, start, end - start);
-}
-EXPORT_SYMBOL(ecardm_iomap);
-
-static void atomwide_3p_quirk(ecard_t *ec)
-{
- void __iomem *addr = __ecard_address(ec, ECARD_IOC, ECARD_SYNC);
- unsigned int i;
-
- /* Disable interrupts on each port */
- for (i = 0x2000; i <= 0x2800; i += 0x0400)
- writeb(0, addr + i + 4);
-}
-
-/*
- * Probe for an expansion card.
- *
- * If bit 1 of the first byte of the card is set, then the
- * card does not exist.
- */
-static int __init ecard_probe(int slot, unsigned irq, card_type_t type)
-{
- ecard_t **ecp;
- ecard_t *ec;
- struct ex_ecid cid;
- void __iomem *addr;
- int i, rc;
-
- ec = ecard_alloc_card(type, slot);
- if (IS_ERR(ec)) {
- rc = PTR_ERR(ec);
- goto nomem;
- }
-
- rc = -ENODEV;
- if ((addr = __ecard_address(ec, type, ECARD_SYNC)) == NULL)
- goto nodev;
-
- cid.r_zero = 1;
- ecard_readbytes(&cid, ec, 0, 16, 0);
- if (cid.r_zero)
- goto nodev;
-
- ec->cid.id = cid.r_id;
- ec->cid.cd = cid.r_cd;
- ec->cid.is = cid.r_is;
- ec->cid.w = cid.r_w;
- ec->cid.manufacturer = ecard_getu16(cid.r_manu);
- ec->cid.product = ecard_getu16(cid.r_prod);
- ec->cid.country = cid.r_country;
- ec->cid.irqmask = cid.r_irqmask;
- ec->cid.irqoff = ecard_gets24(cid.r_irqoff);
- ec->cid.fiqmask = cid.r_fiqmask;
- ec->cid.fiqoff = ecard_gets24(cid.r_fiqoff);
- ec->fiqaddr =
- ec->irqaddr = addr;
-
- if (ec->cid.is) {
- ec->irqmask = ec->cid.irqmask;
- ec->irqaddr += ec->cid.irqoff;
- ec->fiqmask = ec->cid.fiqmask;
- ec->fiqaddr += ec->cid.fiqoff;
- } else {
- ec->irqmask = 1;
- ec->fiqmask = 4;
- }
-
- for (i = 0; i < ARRAY_SIZE(quirklist); i++)
- if (quirklist[i].manufacturer == ec->cid.manufacturer &&
- quirklist[i].product == ec->cid.product) {
- if (quirklist[i].type)
- ec->card_desc = quirklist[i].type;
- if (quirklist[i].init)
- quirklist[i].init(ec);
- break;
- }
-
- ec->irq = irq;
-
- /*
- * hook the interrupt handlers
- */
- if (slot < 8) {
- irq_set_chip_and_handler(ec->irq, &ecard_chip,
- handle_level_irq);
- irq_set_chip_data(ec->irq, ec);
- irq_clear_status_flags(ec->irq, IRQ_NOREQUEST);
- }
-
-#ifdef CONFIG_ARCH_RPC
- /* On RiscPC, only first two slots have DMA capability */
- if (slot < 2)
- ec->dma = 2 + slot;
-#endif
-
- for (ecp = &cards; *ecp; ecp = &(*ecp)->next);
-
- *ecp = ec;
- slot_to_expcard[slot] = ec;
-
- rc = device_register(&ec->dev);
- if (rc)
- goto nodev;
-
- return 0;
-
- nodev:
- ecard_free_card(ec);
- nomem:
- return rc;
-}
-
-/*
- * Initialise the expansion card system.
- * Locate all hardware - interrupt management and
- * actual cards.
- */
-static int __init ecard_init(void)
-{
- struct task_struct *task;
- int slot, irqbase;
-
- irqbase = irq_alloc_descs(-1, 0, 8, -1);
- if (irqbase < 0)
- return irqbase;
-
- task = kthread_run(ecard_task, NULL, "kecardd");
- if (IS_ERR(task)) {
- printk(KERN_ERR "Ecard: unable to create kernel thread: %ld\n",
- PTR_ERR(task));
- irq_free_descs(irqbase, 8);
- return PTR_ERR(task);
- }
-
- printk("Probing expansion cards\n");
-
- for (slot = 0; slot < 8; slot ++) {
- if (ecard_probe(slot, irqbase + slot, ECARD_EASI) == -ENODEV)
- ecard_probe(slot, irqbase + slot, ECARD_IOC);
- }
-
- ecard_probe(8, 11, ECARD_IOC);
-
- irq_set_chained_handler(IRQ_EXPANSIONCARD, ecard_irq_handler);
-
- ecard_proc_init();
-
- return 0;
-}
-
-subsys_initcall(ecard_init);
-
-/*
- * ECARD "bus"
- */
-static const struct ecard_id *
-ecard_match_device(const struct ecard_id *ids, struct expansion_card *ec)
-{
- int i;
-
- for (i = 0; ids[i].manufacturer != 65535; i++)
- if (ec->cid.manufacturer == ids[i].manufacturer &&
- ec->cid.product == ids[i].product)
- return ids + i;
-
- return NULL;
-}
-
-static int ecard_drv_probe(struct device *dev)
-{
- struct expansion_card *ec = ECARD_DEV(dev);
- struct ecard_driver *drv = ECARD_DRV(dev->driver);
- const struct ecard_id *id;
- int ret;
-
- id = ecard_match_device(drv->id_table, ec);
-
- ec->claimed = 1;
- ret = drv->probe(ec, id);
- if (ret)
- ec->claimed = 0;
- return ret;
-}
-
-static void ecard_drv_remove(struct device *dev)
-{
- struct expansion_card *ec = ECARD_DEV(dev);
- struct ecard_driver *drv = ECARD_DRV(dev->driver);
-
- drv->remove(ec);
- ec->claimed = 0;
-
- /*
- * Restore the default operations. We ensure that the
- * ops are set before we change the data.
- */
- ec->ops = &ecard_default_ops;
- barrier();
- ec->irq_data = NULL;
-}
-
-/*
- * Before rebooting, we must make sure that the expansion card is in a
- * sensible state, so it can be re-detected. This means that the first
- * page of the ROM must be visible. We call the expansion cards reset
- * handler, if any.
- */
-static void ecard_drv_shutdown(struct device *dev)
-{
- struct expansion_card *ec = ECARD_DEV(dev);
- struct ecard_driver *drv = ECARD_DRV(dev->driver);
- struct ecard_request req;
-
- if (dev->driver) {
- if (drv->shutdown)
- drv->shutdown(ec);
- ec->claimed = 0;
- }
-
- /*
- * If this card has a loader, call the reset handler.
- */
- if (ec->loader) {
- req.fn = ecard_task_reset;
- req.ec = ec;
- ecard_call(&req);
- }
-}
-
-int ecard_register_driver(struct ecard_driver *drv)
-{
- drv->drv.bus = &ecard_bus_type;
-
- return driver_register(&drv->drv);
-}
-
-void ecard_remove_driver(struct ecard_driver *drv)
-{
- driver_unregister(&drv->drv);
-}
-
-static int ecard_match(struct device *_dev, const struct device_driver *_drv)
-{
- struct expansion_card *ec = ECARD_DEV(_dev);
- struct ecard_driver *drv = ECARD_DRV(_drv);
- int ret;
-
- if (drv->id_table) {
- ret = ecard_match_device(drv->id_table, ec) != NULL;
- } else {
- ret = ec->cid.id == drv->id;
- }
-
- return ret;
-}
-
-const struct bus_type ecard_bus_type = {
- .name = "ecard",
- .dev_groups = ecard_dev_groups,
- .match = ecard_match,
- .probe = ecard_drv_probe,
- .remove = ecard_drv_remove,
- .shutdown = ecard_drv_shutdown,
-};
-
-static int ecard_bus_init(void)
-{
- return bus_register(&ecard_bus_type);
-}
-
-postcore_initcall(ecard_bus_init);
-
-EXPORT_SYMBOL(ecard_readchunk);
-EXPORT_SYMBOL(ecard_register_driver);
-EXPORT_SYMBOL(ecard_remove_driver);
-EXPORT_SYMBOL(ecard_bus_type);
diff --git a/arch/arm/mach-rpc/ecard.h b/arch/arm/mach-rpc/ecard.h
deleted file mode 100644
index 873dd3d9f274..000000000000
--- a/arch/arm/mach-rpc/ecard.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * ecard.h
- *
- * Copyright 2007 Russell King
- */
-
-/* Definitions internal to ecard.c - for it's use only!!
- *
- * External expansion card header as read from the card
- */
-struct ex_ecid {
- unsigned char r_irq:1;
- unsigned char r_zero:1;
- unsigned char r_fiq:1;
- unsigned char r_id:4;
- unsigned char r_a:1;
-
- unsigned char r_cd:1;
- unsigned char r_is:1;
- unsigned char r_w:2;
- unsigned char r_r1:4;
-
- unsigned char r_r2:8;
-
- unsigned char r_prod[2];
-
- unsigned char r_manu[2];
-
- unsigned char r_country;
-
- unsigned char r_fiqmask;
- unsigned char r_fiqoff[3];
-
- unsigned char r_irqmask;
- unsigned char r_irqoff[3];
-};
-
-/*
- * Chunk directory entry as read from the card
- */
-struct ex_chunk_dir {
- unsigned char r_id;
- unsigned char r_len[3];
- unsigned long r_start;
- union {
- char string[256];
- char data[1];
- } d;
-#define c_id(x) ((x)->r_id)
-#define c_len(x) ((x)->r_len[0]|((x)->r_len[1]<<8)|((x)->r_len[2]<<16))
-#define c_start(x) ((x)->r_start)
-};
-
-typedef enum ecard_type { /* Cards address space */
- ECARD_IOC,
- ECARD_MEMC,
- ECARD_EASI
-} card_type_t;
-
-typedef enum { /* Speed for ECARD_IOC space */
- ECARD_SLOW = 0,
- ECARD_MEDIUM = 1,
- ECARD_FAST = 2,
- ECARD_SYNC = 3
-} card_speed_t;
diff --git a/arch/arm/mach-rpc/fiq.S b/arch/arm/mach-rpc/fiq.S
deleted file mode 100644
index 087bdf4bc093..000000000000
--- a/arch/arm/mach-rpc/fiq.S
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-
- .equ ioc_base_high, IOC_BASE & 0xff000000
- .equ ioc_base_low, IOC_BASE & 0x00ff0000
-
- .text
- .global rpc_default_fiq_end
-ENTRY(rpc_default_fiq_start)
- mov r12, #ioc_base_high
- .if ioc_base_low
- orr r12, r12, #ioc_base_low
- .endif
- strb r12, [r12, #0x38] @ Disable FIQ register
- subs pc, lr, #4
-rpc_default_fiq_end:
diff --git a/arch/arm/mach-rpc/floppydma.S b/arch/arm/mach-rpc/floppydma.S
deleted file mode 100644
index 6698b83050dc..000000000000
--- a/arch/arm/mach-rpc/floppydma.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/arm/lib/floppydma.S
- *
- * Copyright (C) 1995, 1996 Russell King
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
- .text
-
- .global floppy_fiqin_end
-ENTRY(floppy_fiqin_start)
- subs r9, r9, #1
- ldrbgt r12, [r11, #-4]
- ldrble r12, [r11], #0
- strb r12, [r10], #1
- subs pc, lr, #4
-floppy_fiqin_end:
-
- .global floppy_fiqout_end
-ENTRY(floppy_fiqout_start)
- subs r9, r9, #1
- ldrbge r12, [r10], #1
- movlt r12, #0
- strble r12, [r11], #0
- subsle pc, lr, #4
- strb r12, [r11, #-4]
- subs pc, lr, #4
-floppy_fiqout_end:
diff --git a/arch/arm/mach-rpc/include/mach/acornfb.h b/arch/arm/mach-rpc/include/mach/acornfb.h
deleted file mode 100644
index 2bf18ab3d699..000000000000
--- a/arch/arm/mach-rpc/include/mach/acornfb.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-rpc/include/mach/acornfb.h
- *
- * Copyright (C) 1999 Russell King
- *
- * AcornFB architecture specific code
- */
-
-#define acornfb_bandwidth(var) ((var)->pixclock * 8 / (var)->bits_per_pixel)
-
-static inline int
-acornfb_valid_pixrate(struct fb_var_screeninfo *var)
-{
- u_long limit;
-
- if (!var->pixclock)
- return 0;
-
- /*
- * Limits below are taken from RISC OS bandwidthlimit file
- */
- if (current_par.using_vram) {
- if (current_par.vram_half_sam == 2048)
- limit = 6578;
- else
- limit = 13157;
- } else {
- limit = 26315;
- }
-
- return acornfb_bandwidth(var) >= limit;
-}
-
-/*
- * Try to find the best PLL parameters for the pixel clock.
- * This algorithm seems to give best predictable results,
- * and produces the same values as detailed in the VIDC20
- * data sheet.
- */
-static inline u_int
-acornfb_vidc20_find_pll(u_int pixclk)
-{
- u_int r, best_r = 2, best_v = 2;
- int best_d = 0x7fffffff;
-
- for (r = 2; r <= 32; r++) {
- u_int rr, v, p;
- int d;
-
- rr = 41667 * r;
-
- v = (rr + pixclk / 2) / pixclk;
-
- if (v > 32 || v < 2)
- continue;
-
- p = (rr + v / 2) / v;
-
- d = pixclk - p;
-
- if (d < 0)
- d = -d;
-
- if (d < best_d) {
- best_d = d;
- best_v = v - 1;
- best_r = r - 1;
- }
-
- if (d == 0)
- break;
- }
-
- return best_v << 8 | best_r;
-}
-
-static inline void
-acornfb_vidc20_find_rates(struct vidc_timing *vidc,
- struct fb_var_screeninfo *var)
-{
- u_int div;
-
- /* Select pixel-clock divisor to keep PLL in range */
- div = var->pixclock / 9090; /*9921*/
-
- /* Limit divisor */
- if (div == 0)
- div = 1;
- if (div > 8)
- div = 8;
-
- /* Encode divisor to VIDC20 setting */
- switch (div) {
- case 1: vidc->control |= VIDC20_CTRL_PIX_CK; break;
- case 2: vidc->control |= VIDC20_CTRL_PIX_CK2; break;
- case 3: vidc->control |= VIDC20_CTRL_PIX_CK3; break;
- case 4: vidc->control |= VIDC20_CTRL_PIX_CK4; break;
- case 5: vidc->control |= VIDC20_CTRL_PIX_CK5; break;
- case 6: vidc->control |= VIDC20_CTRL_PIX_CK6; break;
- case 7: vidc->control |= VIDC20_CTRL_PIX_CK7; break;
- case 8: vidc->control |= VIDC20_CTRL_PIX_CK8; break;
- }
-
- /*
- * With VRAM, the FIFO can be set to the highest possible setting
- * because there are no latency considerations for other memory
- * accesses. However, in 64 bit bus mode the FIFO preload value
- * must not be set to VIDC20_CTRL_FIFO_28 because this will let
- * the FIFO overflow. See VIDC20 manual page 33 (6.0 Setting the
- * FIFO preload value).
- */
- if (current_par.using_vram) {
- if (current_par.vram_half_sam == 2048)
- vidc->control |= VIDC20_CTRL_FIFO_24;
- else
- vidc->control |= VIDC20_CTRL_FIFO_28;
- } else {
- unsigned long bandwidth = acornfb_bandwidth(var);
-
- /* Encode bandwidth as VIDC20 setting */
- if (bandwidth > 33334) /* < 30.0MB/s */
- vidc->control |= VIDC20_CTRL_FIFO_16;
- else if (bandwidth > 26666) /* < 37.5MB/s */
- vidc->control |= VIDC20_CTRL_FIFO_20;
- else if (bandwidth > 22222) /* < 45.0MB/s */
- vidc->control |= VIDC20_CTRL_FIFO_24;
- else /* > 45.0MB/s */
- vidc->control |= VIDC20_CTRL_FIFO_28;
- }
-
- /* Find the PLL values */
- vidc->pll_ctl = acornfb_vidc20_find_pll(var->pixclock / div);
-}
-
-#define acornfb_default_control() (VIDC20_CTRL_PIX_VCLK)
-#define acornfb_default_econtrol() (VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3))
diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h
deleted file mode 100644
index 6f197706f979..000000000000
--- a/arch/arm/mach-rpc/include/mach/hardware.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-rpc/include/mach/hardware.h
- *
- * Copyright (C) 1996-1999 Russell King.
- *
- * This file contains the hardware definitions of the RiscPC series machines.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <mach/memory.h>
-
-/*
- * What hardware must be present
- */
-#define HAS_IOMD
-#define HAS_VIDC20
-
-/* Hardware addresses of major areas.
- * *_START is the physical address
- * *_SIZE is the size of the region
- * *_BASE is the virtual address
- */
-#define RPC_RAM_SIZE 0x10000000
-#define RPC_RAM_START 0x10000000
-
-#define EASI_SIZE 0x08000000 /* EASI I/O */
-#define EASI_START 0x08000000
-#define EASI_BASE IOMEM(0xe5000000)
-
-#define IO_START 0x03000000 /* I/O */
-#define IO_SIZE 0x01000000
-#define IO_BASE IOMEM(0xe0000000)
-
-#define SCREEN_START 0x02000000 /* VRAM */
-#define SCREEN_END 0xdfc00000
-#define SCREEN_BASE 0xdf800000
-
-#define UNCACHEABLE_ADDR (FLUSH_BASE + 0x10000)
-
-/*
- * IO Addresses
- */
-#define ECARD_EASI_BASE (EASI_BASE)
-#define VIDC_BASE (IO_BASE + 0x00400000)
-#define EXPMASK_BASE (IO_BASE + 0x00360000)
-#define ECARD_IOC4_BASE (IO_BASE + 0x00270000)
-#define ECARD_IOC_BASE (IO_BASE + 0x00240000)
-#define IOMD_BASE (IO_BASE + 0x00200000)
-#define IOC_BASE (IO_BASE + 0x00200000)
-#define ECARD_MEMC8_BASE (IO_BASE + 0x0002b000)
-#define FLOPPYDMA_BASE (IO_BASE + 0x0002a000)
-#define PCIO_BASE (IO_BASE + 0x00010000)
-#define ECARD_MEMC_BASE (IO_BASE + 0x00000000)
-
-#define vidc_writel(val) __raw_writel(val, VIDC_BASE)
-
-#define NETSLOT_BASE 0x0302b000
-#define NETSLOT_SIZE 0x00001000
-
-#define PODSLOT_IOC0_BASE 0x03240000
-#define PODSLOT_IOC4_BASE 0x03270000
-#define PODSLOT_IOC_SIZE (1 << 14)
-#define PODSLOT_MEMC_BASE 0x03000000
-#define PODSLOT_MEMC_SIZE (1 << 14)
-#define PODSLOT_EASI_BASE 0x08000000
-#define PODSLOT_EASI_SIZE (1 << 24)
-
-#define EXPMASK_STATUS (EXPMASK_BASE + 0x00)
-#define EXPMASK_ENABLE (EXPMASK_BASE + 0x04)
-
-#endif
diff --git a/arch/arm/mach-rpc/include/mach/io.h b/arch/arm/mach-rpc/include/mach/io.h
deleted file mode 100644
index 8a8f28406691..000000000000
--- a/arch/arm/mach-rpc/include/mach/io.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-rpc/include/mach/io.h
- *
- * Copyright (C) 1997 Russell King
- *
- * Modifications:
- * 06-Dec-1997 RMK Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <mach/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffff
-
-/*
- * We need PC style IO addressing for:
- * - floppy (at 0x3f2,0x3f4,0x3f5,0x3f7)
- * - parport (at 0x278-0x27a, 0x27b-0x27f, 0x778-0x77a)
- * - 8250 serial (only for compile)
- *
- * These peripherals are found in an area of MMIO which looks very much
- * like an ISA bus, but with registers at the low byte of each word.
- */
-#define __io(a) (PCIO_BASE + ((a) << 2))
-
-#endif
diff --git a/arch/arm/mach-rpc/include/mach/irqs.h b/arch/arm/mach-rpc/include/mach/irqs.h
deleted file mode 100644
index 0c3428fd9729..000000000000
--- a/arch/arm/mach-rpc/include/mach/irqs.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-rpc/include/mach/irqs.h
- *
- * Copyright (C) 1996 Russell King
- */
-
-#define IRQ_PRINTER 0
-#define IRQ_BATLOW 1
-#define IRQ_FLOPPYINDEX 2
-#define IRQ_VSYNCPULSE 3
-#define IRQ_POWERON 4
-#define IRQ_TIMER0 5
-#define IRQ_TIMER1 6
-#define IRQ_IMMEDIATE 7
-#define IRQ_EXPCARDFIQ 8
-#define IRQ_HARDDISK 9
-#define IRQ_SERIALPORT 10
-#define IRQ_FLOPPYDISK 12
-#define IRQ_EXPANSIONCARD 13
-#define IRQ_KEYBOARDTX 14
-#define IRQ_KEYBOARDRX 15
-
-#define IRQ_DMA0 16
-#define IRQ_DMA1 17
-#define IRQ_DMA2 18
-#define IRQ_DMA3 19
-#define IRQ_DMAS0 20
-#define IRQ_DMAS1 21
-
-#define FIQ_FLOPPYDATA 0
-#define FIQ_ECONET 2
-#define FIQ_SERIALPORT 4
-#define FIQ_EXPANSIONCARD 6
-#define FIQ_FORCE 7
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START 64
-
-#define NR_IRQS 128
diff --git a/arch/arm/mach-rpc/include/mach/isa-dma.h b/arch/arm/mach-rpc/include/mach/isa-dma.h
deleted file mode 100644
index d9c3af1ef718..000000000000
--- a/arch/arm/mach-rpc/include/mach/isa-dma.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-rpc/include/mach/isa-dma.h
- *
- * Copyright (C) 1997 Russell King
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_CHANNELS 8
-
-#define DMA_0 0
-#define DMA_1 1
-#define DMA_2 2
-#define DMA_3 3
-#define DMA_S0 4
-#define DMA_S1 5
-#define DMA_VIRTUAL_FLOPPY 6
-#define DMA_VIRTUAL_SOUND 7
-
-#define DMA_FLOPPY DMA_VIRTUAL_FLOPPY
-
-#define IOMD_DMA_BOUNDARY (PAGE_SIZE - 1)
-
-#endif /* _ASM_ARCH_DMA_H */
-
diff --git a/arch/arm/mach-rpc/include/mach/memory.h b/arch/arm/mach-rpc/include/mach/memory.h
deleted file mode 100644
index a586eb31b18d..000000000000
--- a/arch/arm/mach-rpc/include/mach/memory.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-rpc/include/mach/memory.h
- *
- * Copyright (C) 1996,1997,1998 Russell King.
- *
- * Changelog:
- * 20-Oct-1996 RMK Created
- * 31-Dec-1997 RMK Fixed definitions to reduce warnings
- * 11-Jan-1998 RMK Uninlined to reduce hits on cache
- * 08-Feb-1998 RMK Added __virt_to_bus and __bus_to_virt
- * 21-Mar-1999 RMK Renamed to memory.h
- * RMK Added TASK_SIZE and PAGE_OFFSET
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS 0x00000000
-#define FLUSH_BASE 0xdf000000
-
-/*
- * Sparsemem support. Each section is a maximum of 64MB. The sections
- * are offset by 128MB and can cover 128MB, so that gives us a maximum
- * of 29 physmem bits.
- */
-#define MAX_PHYSMEM_BITS 29
-#define SECTION_SIZE_BITS 26
-
-#endif
diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
deleted file mode 100644
index 1fbe7eb956fd..000000000000
--- a/arch/arm/mach-rpc/include/mach/uncompress.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-rpc/include/mach/uncompress.h
- *
- * Copyright (C) 1996 Russell King
- */
-#define VIDMEM ((char *)SCREEN_START)
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-int video_size_row;
-unsigned char bytes_per_char_h;
-extern unsigned long con_charconvtable[256];
-
-struct param_struct {
- unsigned long page_size;
- unsigned long nr_pages;
- unsigned long ramdisk_size;
- unsigned long mountrootrdonly;
- unsigned long rootdev;
- unsigned long video_num_cols;
- unsigned long video_num_rows;
- unsigned long video_x;
- unsigned long video_y;
- unsigned long memc_control_reg;
- unsigned char sounddefault;
- unsigned char adfsdrives;
- unsigned char bytes_per_char_h;
- unsigned char bytes_per_char_v;
- unsigned long unused[256/4-11];
-};
-
-static const unsigned long palette_4[16] = {
- 0x00000000,
- 0x000000cc,
- 0x0000cc00, /* Green */
- 0x0000cccc, /* Yellow */
- 0x00cc0000, /* Blue */
- 0x00cc00cc, /* Magenta */
- 0x00cccc00, /* Cyan */
- 0x00cccccc, /* White */
- 0x00000000,
- 0x000000ff,
- 0x0000ff00,
- 0x0000ffff,
- 0x00ff0000,
- 0x00ff00ff,
- 0x00ffff00,
- 0x00ffffff
-};
-
-#define palette_setpixel(p) *(unsigned long *)(IO_START+0x00400000) = 0x10000000|((p) & 255)
-#define palette_write(v) *(unsigned long *)(IO_START+0x00400000) = 0x00000000|((v) & 0x00ffffff)
-
-/*
- * params_phys is a linker defined symbol - see
- * arch/arm/boot/compressed/Makefile
- */
-extern __attribute__((pure)) struct param_struct *params(void);
-#define params (params())
-
-#ifndef STANDALONE_DEBUG
-unsigned long video_num_cols;
-unsigned long video_num_rows;
-unsigned long video_x;
-unsigned long video_y;
-unsigned char bytes_per_char_v;
-int white;
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
- extern void ll_write_char(char *, char c, char white);
- int x,y;
- char *ptr;
-
- x = video_x;
- y = video_y;
-
- if (c == '\n') {
- if (++y >= video_num_rows)
- y--;
- } else if (c == '\r') {
- x = 0;
- } else {
- ptr = VIDMEM + ((y*video_num_cols*bytes_per_char_v+x)*bytes_per_char_h);
- ll_write_char(ptr, c, white);
- if (++x >= video_num_cols) {
- x = 0;
- if ( ++y >= video_num_rows ) {
- y--;
- }
- }
- }
-
- video_x = x;
- video_y = y;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * Setup for decompression
- */
-static void arch_decomp_setup(void)
-{
- int i;
- struct tag *t = (struct tag *)params;
- unsigned int nr_pages = 0, page_size = PAGE_SIZE;
-
- if (t->hdr.tag == ATAG_CORE) {
- for (; t->hdr.size; t = tag_next(t)) {
- if (t->hdr.tag == ATAG_VIDEOTEXT) {
- video_num_rows = t->u.videotext.video_lines;
- video_num_cols = t->u.videotext.video_cols;
- video_x = t->u.videotext.x;
- video_y = t->u.videotext.y;
- } else if (t->hdr.tag == ATAG_VIDEOLFB) {
- bytes_per_char_h = t->u.videolfb.lfb_depth;
- bytes_per_char_v = 8;
- } else if (t->hdr.tag == ATAG_MEM) {
- page_size = PAGE_SIZE;
- nr_pages += (t->u.mem.size / PAGE_SIZE);
- }
- }
- } else {
- nr_pages = params->nr_pages;
- page_size = params->page_size;
- video_num_rows = params->video_num_rows;
- video_num_cols = params->video_num_cols;
- video_x = params->video_x;
- video_y = params->video_y;
- bytes_per_char_h = params->bytes_per_char_h;
- bytes_per_char_v = params->bytes_per_char_v;
- }
-
- video_size_row = video_num_cols * bytes_per_char_h;
-
- if (bytes_per_char_h == 4)
- for (i = 0; i < 256; i++)
- con_charconvtable[i] =
- (i & 128 ? 1 << 0 : 0) |
- (i & 64 ? 1 << 4 : 0) |
- (i & 32 ? 1 << 8 : 0) |
- (i & 16 ? 1 << 12 : 0) |
- (i & 8 ? 1 << 16 : 0) |
- (i & 4 ? 1 << 20 : 0) |
- (i & 2 ? 1 << 24 : 0) |
- (i & 1 ? 1 << 28 : 0);
- else
- for (i = 0; i < 16; i++)
- con_charconvtable[i] =
- (i & 8 ? 1 << 0 : 0) |
- (i & 4 ? 1 << 8 : 0) |
- (i & 2 ? 1 << 16 : 0) |
- (i & 1 ? 1 << 24 : 0);
-
-
- palette_setpixel(0);
- if (bytes_per_char_h == 1) {
- palette_write (0);
- palette_write (0x00ffffff);
- for (i = 2; i < 256; i++)
- palette_write (0);
- white = 1;
- } else {
- for (i = 0; i < 256; i++)
- palette_write (i < 16 ? palette_4[i] : 0);
- white = 7;
- }
-
- if (nr_pages * page_size < 4096*1024) error("<4M of mem\n");
-}
-#endif
diff --git a/arch/arm/mach-rpc/io-acorn.S b/arch/arm/mach-rpc/io-acorn.S
deleted file mode 100644
index aa9bf0d771c0..000000000000
--- a/arch/arm/mach-rpc/io-acorn.S
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/arm/lib/io-acorn.S
- *
- * Copyright (C) 1995, 1996 Russell King
- *
- * 27/03/03 Ian Molton Clean up CONFIG_CPU
- */
-#include <linux/linkage.h>
-#include <linux/kern_levels.h>
-#include <asm/assembler.h>
-
- .text
- .align
-
-.Liosl_warning:
- .ascii KERN_WARNING "insl/outsl not implemented, called from %08lX\0"
- .align
-
-/*
- * These make no sense on Acorn machines.
- * Print a warning message.
- */
-ENTRY(insl)
-ENTRY(outsl)
- adr r0, .Liosl_warning
- mov r1, lr
- b _printk
diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
deleted file mode 100644
index dc29384b6ef8..000000000000
--- a/arch/arm/mach-rpc/irq.c
+++ /dev/null
@@ -1,226 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/io.h>
-
-#include <asm/mach/irq.h>
-#include <asm/hardware/iomd.h>
-#include <asm/irq.h>
-#include <asm/fiq.h>
-
-// These are offsets from the stat register for each IRQ bank
-#define STAT 0x00
-#define REQ 0x04
-#define CLR 0x04
-#define MASK 0x08
-
-static const u8 irq_prio_h[256] = {
- 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10,
- 12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10,
- 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
- 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
- 14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10,
- 14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10,
- 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
- 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
- 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10,
- 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10,
- 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
- 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
- 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10,
- 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10,
- 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
- 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
-};
-
-static const u8 irq_prio_d[256] = {
- 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
- 20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
- 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
- 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
- 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
- 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
- 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
- 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
- 23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
- 23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
- 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
- 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
- 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
- 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
- 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
- 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
-};
-
-static const u8 irq_prio_l[256] = {
- 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3,
- 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3,
- 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
- 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
- 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3,
- 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3,
- 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
- 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-};
-
-static int iomd_get_irq_nr(void)
-{
- int irq;
- u8 reg;
-
- /* get highest priority first */
- reg = readb(IOC_BASE + IOMD_IRQREQB);
- irq = irq_prio_h[reg];
- if (irq)
- return irq;
-
- /* get DMA */
- reg = readb(IOC_BASE + IOMD_DMAREQ);
- irq = irq_prio_d[reg];
- if (irq)
- return irq;
-
- /* get low priority */
- reg = readb(IOC_BASE + IOMD_IRQREQA);
- irq = irq_prio_l[reg];
- if (irq)
- return irq;
- return 0;
-}
-
-static void iomd_handle_irq(struct pt_regs *regs)
-{
- int irq;
-
- do {
- irq = iomd_get_irq_nr();
- if (irq)
- generic_handle_irq(irq);
- } while (irq);
-}
-
-static void __iomem *iomd_get_base(struct irq_data *d)
-{
- void *cd = irq_data_get_irq_chip_data(d);
-
- return (void __iomem *)(unsigned long)cd;
-}
-
-static void iomd_set_base_mask(unsigned int irq, void __iomem *base, u32 mask)
-{
- struct irq_data *d = irq_get_irq_data(irq);
-
- d->mask = mask;
- irq_set_chip_data(irq, (void *)(unsigned long)base);
-}
-
-static void iomd_irq_mask_ack(struct irq_data *d)
-{
- void __iomem *base = iomd_get_base(d);
- unsigned int val, mask = d->mask;
-
- val = readb(base + MASK);
- writeb(val & ~mask, base + MASK);
- writeb(mask, base + CLR);
-}
-
-static void iomd_irq_mask(struct irq_data *d)
-{
- void __iomem *base = iomd_get_base(d);
- unsigned int val, mask = d->mask;
-
- val = readb(base + MASK);
- writeb(val & ~mask, base + MASK);
-}
-
-static void iomd_irq_unmask(struct irq_data *d)
-{
- void __iomem *base = iomd_get_base(d);
- unsigned int val, mask = d->mask;
-
- val = readb(base + MASK);
- writeb(val | mask, base + MASK);
-}
-
-static struct irq_chip iomd_chip_clr = {
- .irq_mask_ack = iomd_irq_mask_ack,
- .irq_mask = iomd_irq_mask,
- .irq_unmask = iomd_irq_unmask,
-};
-
-static struct irq_chip iomd_chip_noclr = {
- .irq_mask = iomd_irq_mask,
- .irq_unmask = iomd_irq_unmask,
-};
-
-extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end;
-
-void __init rpc_init_irq(void)
-{
- unsigned int irq, clr, set;
-
- iomd_writeb(0, IOMD_IRQMASKA);
- iomd_writeb(0, IOMD_IRQMASKB);
- iomd_writeb(0, IOMD_FIQMASK);
- iomd_writeb(0, IOMD_DMAMASK);
-
- set_fiq_handler(&rpc_default_fiq_start,
- &rpc_default_fiq_end - &rpc_default_fiq_start);
-
- set_handle_irq(iomd_handle_irq);
-
- for (irq = 0; irq < NR_IRQS; irq++) {
- clr = IRQ_NOREQUEST;
- set = 0;
-
- if (irq <= 6 || (irq >= 9 && irq <= 15))
- clr |= IRQ_NOPROBE;
-
- if (irq == 21 || (irq >= 16 && irq <= 19) ||
- irq == IRQ_KEYBOARDTX)
- set |= IRQ_NOAUTOEN;
-
- switch (irq) {
- case 0 ... 7:
- irq_set_chip_and_handler(irq, &iomd_chip_clr,
- handle_level_irq);
- irq_modify_status(irq, clr, set);
- iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATA,
- BIT(irq));
- break;
-
- case 8 ... 15:
- irq_set_chip_and_handler(irq, &iomd_chip_noclr,
- handle_level_irq);
- irq_modify_status(irq, clr, set);
- iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATB,
- BIT(irq - 8));
- break;
-
- case 16 ... 21:
- irq_set_chip_and_handler(irq, &iomd_chip_noclr,
- handle_level_irq);
- irq_modify_status(irq, clr, set);
- iomd_set_base_mask(irq, IOMD_BASE + IOMD_DMASTAT,
- BIT(irq - 16));
- break;
-
- case 64 ... 71:
- irq_set_chip(irq, &iomd_chip_noclr);
- irq_modify_status(irq, clr, set);
- iomd_set_base_mask(irq, IOMD_BASE + IOMD_FIQSTAT,
- BIT(irq - 64));
- break;
- }
- }
-
- init_FIQ(FIQ_START);
-}
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
deleted file mode 100644
index f70fb9c4b0cb..000000000000
--- a/arch/arm/mach-rpc/riscpc.c
+++ /dev/null
@@ -1,225 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-rpc/riscpc.c
- *
- * Copyright (C) 1998-2001 Russell King
- *
- * Architecture specific fixups.
- */
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include <linux/ata_platform.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/reboot.h>
-
-#include <asm/elf.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/hardware/iomd.h>
-#include <asm/page.h>
-#include <asm/domain.h>
-#include <asm/setup.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-extern void rpc_init_irq(void);
-
-unsigned int vram_size;
-unsigned int memc_ctrl_reg;
-unsigned int number_mfm_drives;
-
-static int __init parse_tag_acorn(const struct tag *tag)
-{
- memc_ctrl_reg = tag->u.acorn.memc_control_reg;
- number_mfm_drives = tag->u.acorn.adfsdrives;
-
- switch (tag->u.acorn.vram_pages) {
- case 512:
- vram_size += PAGE_SIZE * 256;
- fallthrough; /* ??? */
- case 256:
- vram_size += PAGE_SIZE * 256;
- break;
- default:
- break;
- }
-#if 0
- if (vram_size) {
- desc->video_start = 0x02000000;
- desc->video_end = 0x02000000 + vram_size;
- }
-#endif
- return 0;
-}
-
-__tagtable(ATAG_ACORN, parse_tag_acorn);
-
-static struct map_desc rpc_io_desc[] __initdata = {
- { /* VRAM */
- .virtual = SCREEN_BASE,
- .pfn = __phys_to_pfn(SCREEN_START),
- .length = 2*1048576,
- .type = MT_DEVICE
- }, { /* IO space */
- .virtual = (u32)IO_BASE,
- .pfn = __phys_to_pfn(IO_START),
- .length = IO_SIZE ,
- .type = MT_DEVICE
- }, { /* EASI space */
- .virtual = (unsigned long)EASI_BASE,
- .pfn = __phys_to_pfn(EASI_START),
- .length = EASI_SIZE,
- .type = MT_DEVICE
- }
-};
-
-static void __init rpc_map_io(void)
-{
- iotable_init(rpc_io_desc, ARRAY_SIZE(rpc_io_desc));
-
- /*
- * Turn off floppy.
- */
- writeb(0xc, PCIO_BASE + (0x3f2 << 2));
-
- /*
- * RiscPC can't handle half-word loads and stores
- */
- elf_hwcap &= ~HWCAP_HALF;
-}
-
-static struct resource acornfb_resources[] = {
- /* VIDC */
- DEFINE_RES_MEM(0x03400000, 0x00200000),
- DEFINE_RES_IRQ(IRQ_VSYNCPULSE),
-};
-
-static struct platform_device acornfb_device = {
- .name = "acornfb",
- .id = -1,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(acornfb_resources),
- .resource = acornfb_resources,
-};
-
-static struct resource iomd_resources[] = {
- DEFINE_RES_MEM(0x03200000, 0x10000),
-};
-
-static struct platform_device iomd_device = {
- .name = "iomd",
- .id = -1,
- .num_resources = ARRAY_SIZE(iomd_resources),
- .resource = iomd_resources,
-};
-
-static struct resource iomd_kart_resources[] = {
- DEFINE_RES_IRQ(IRQ_KEYBOARDRX),
- DEFINE_RES_IRQ(IRQ_KEYBOARDTX),
-};
-
-static struct platform_device kbd_device = {
- .name = "kart",
- .id = -1,
- .dev = {
- .parent = &iomd_device.dev,
- },
- .num_resources = ARRAY_SIZE(iomd_kart_resources),
- .resource = iomd_kart_resources,
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .mapbase = 0x03010fe0,
- .irq = IRQ_SERIALPORT,
- .uartclk = 1843200,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SKIP_TEST,
- },
- { },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-static struct pata_platform_info pata_platform_data = {
- .ioport_shift = 2,
-};
-
-static struct resource pata_resources[] = {
- DEFINE_RES_MEM(0x030107c0, 0x20),
- DEFINE_RES_MEM(0x03010fd8, 0x04),
- DEFINE_RES_IRQ(IRQ_HARDDISK),
-};
-
-static struct platform_device pata_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(pata_resources),
- .resource = pata_resources,
- .dev = {
- .platform_data = &pata_platform_data,
- .coherent_dma_mask = ~0, /* grumble */
- },
-};
-
-static struct platform_device *devs[] __initdata = {
- &iomd_device,
- &kbd_device,
- &serial_device,
- &acornfb_device,
- &pata_device,
-};
-
-static struct i2c_board_info i2c_rtc = {
- I2C_BOARD_INFO("pcf8583", 0x50)
-};
-
-static int __init rpc_init(void)
-{
- i2c_register_board_info(0, &i2c_rtc, 1);
- return platform_add_devices(devs, ARRAY_SIZE(devs));
-}
-
-arch_initcall(rpc_init);
-
-static void rpc_restart(enum reboot_mode mode, const char *cmd)
-{
- iomd_writeb(0, IOMD_ROMCR0);
-
- /*
- * Jump into the ROM
- */
- soft_restart(0);
-}
-
-void ioc_timer_init(void);
-
-MACHINE_START(RISCPC, "Acorn-RiscPC")
- /* Maintainer: Russell King */
- .atag_offset = 0x100,
- .reserve_lp0 = 1,
- .reserve_lp1 = 1,
- .map_io = rpc_map_io,
- .init_irq = rpc_init_irq,
- .init_time = ioc_timer_init,
- .restart = rpc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c
deleted file mode 100644
index 9f8edcfe9357..000000000000
--- a/arch/arm/mach-rpc/time.c
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/common/time-acorn.c
- *
- * Copyright (c) 1996-2000 Russell King.
- *
- * Changelog:
- * 24-Sep-1996 RMK Created
- * 10-Oct-1996 RMK Brought up to date with arch-sa110eval
- * 04-Dec-1997 RMK Updated for new arch/arm/time.c
- * 13=Jun-2004 DS Moved to arch/arm/common b/c shared w/CLPS7500
- */
-#include <linux/clocksource.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/hardware/ioc.h>
-
-#include <asm/mach/time.h>
-
-#define RPC_CLOCK_FREQ 2000000
-#define RPC_LATCH DIV_ROUND_CLOSEST(RPC_CLOCK_FREQ, HZ)
-
-static u32 ioc_time;
-
-static u64 ioc_timer_read(struct clocksource *cs)
-{
- unsigned int count1, count2, status;
- unsigned long flags;
- u32 ticks;
-
- local_irq_save(flags);
- ioc_writeb (0, IOC_T0LATCH);
- barrier ();
- count1 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
- barrier ();
- status = ioc_readb(IOC_IRQREQA);
- barrier ();
- ioc_writeb (0, IOC_T0LATCH);
- barrier ();
- count2 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
- ticks = ioc_time + RPC_LATCH - count2;
- local_irq_restore(flags);
-
- if (count2 < count1) {
- /*
- * The timer has not reloaded between reading count1 and
- * count2, check whether an interrupt was actually pending.
- */
- if (status & (1 << 5))
- ticks += RPC_LATCH;
- } else if (count2 > count1) {
- /*
- * The timer has reloaded, so count2 indicates the new
- * count since the wrap. The interrupt would not have
- * been processed, so add the missed ticks.
- */
- ticks += RPC_LATCH;
- }
-
- return ticks;
-}
-
-static struct clocksource ioctime_clocksource = {
- .read = ioc_timer_read,
- .mask = CLOCKSOURCE_MASK(32),
- .rating = 100,
-};
-
-void __init ioctime_init(void)
-{
- ioc_writeb(RPC_LATCH & 255, IOC_T0LTCHL);
- ioc_writeb(RPC_LATCH >> 8, IOC_T0LTCHH);
- ioc_writeb(0, IOC_T0GO);
-}
-
-static irqreturn_t
-ioc_timer_interrupt(int irq, void *dev_id)
-{
- ioc_time += RPC_LATCH;
- legacy_timer_tick(1);
- return IRQ_HANDLED;
-}
-
-/*
- * Set up timer interrupt.
- */
-void __init ioc_timer_init(void)
-{
- WARN_ON(clocksource_register_hz(&ioctime_clocksource, RPC_CLOCK_FREQ));
- ioctime_init();
- if (request_irq(IRQ_TIMER0, ioc_timer_interrupt, 0, "timer", NULL))
- pr_err("Failed to request irq %d (timer)\n", IRQ_TIMER0);
-}
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 350f6dcc24cc..07c2fda4d422 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -1112,7 +1112,7 @@ static void __init fill_pmd_gaps(void)
#define fill_pmd_gaps() do { } while (0)
#endif
-#if defined(CONFIG_PCI) && !defined(CONFIG_NEED_MACH_IO_H)
+#if defined(CONFIG_PCI)
static void __init pci_reserve_io(void)
{
struct static_vm *svm;
diff --git a/block/partitions/Kconfig b/block/partitions/Kconfig
index ce17e41451af..94e7df547e7a 100644
--- a/block/partitions/Kconfig
+++ b/block/partitions/Kconfig
@@ -19,13 +19,11 @@ config PARTITION_ADVANCED
config ACORN_PARTITION
bool "Acorn partition support" if PARTITION_ADVANCED
- default y if ARCH_ACORN
help
Support hard disks partitioned under Acorn operating systems.
config ACORN_PARTITION_CUMANA
bool "Cumana partition support" if PARTITION_ADVANCED
- default y if ARCH_ACORN
depends on ACORN_PARTITION
help
Say Y here if you would like to use hard disks under Linux which
@@ -33,12 +31,10 @@ config ACORN_PARTITION_CUMANA
config ACORN_PARTITION_EESOX
bool "EESOX partition support" if PARTITION_ADVANCED
- default y if ARCH_ACORN
depends on ACORN_PARTITION
config ACORN_PARTITION_ICS
bool "ICS partition support" if PARTITION_ADVANCED
- default y if ARCH_ACORN
depends on ACORN_PARTITION
help
Say Y here if you would like to use hard disks under Linux which
@@ -46,7 +42,6 @@ config ACORN_PARTITION_ICS
config ACORN_PARTITION_ADFS
bool "Native filecore partition support" if PARTITION_ADVANCED
- default y if ARCH_ACORN
depends on ACORN_PARTITION
help
The Acorn Disc Filing System is the standard file system of the
@@ -56,7 +51,6 @@ config ACORN_PARTITION_ADFS
config ACORN_PARTITION_POWERTEC
bool "PowerTec partition support" if PARTITION_ADVANCED
- default y if ARCH_ACORN
depends on ACORN_PARTITION
help
Support reading partition tables created on Acorn machines using
@@ -64,7 +58,6 @@ config ACORN_PARTITION_POWERTEC
config ACORN_PARTITION_RISCIX
bool "RISCiX partition support" if PARTITION_ADVANCED
- default y if ARCH_ACORN
depends on ACORN_PARTITION
help
Once upon a time, there was a native Unix port for the Acorn series
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index c41d850b29c6..9770c83aea74 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -1308,7 +1308,7 @@ static void kbd_bh(struct tasklet_struct *unused)
#if defined(CONFIG_X86) || defined(CONFIG_ALPHA) ||\
defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\
defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
- (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC))
+ (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD))
static inline bool kbd_is_hw_raw(const struct input_dev *dev)
{
diff --git a/lib/fonts/font_acorn_8x8.c b/lib/fonts/font_acorn_8x8.c
index 4ff52c79f8c4..ec2b1e463ab9 100644
--- a/lib/fonts/font_acorn_8x8.c
+++ b/lib/fonts/font_acorn_8x8.c
@@ -277,9 +277,5 @@ const struct font_desc font_acorn_8x8 = {
.height = 8,
.charcount = 256,
.data = acorndata_8x8.data,
-#ifdef CONFIG_ARCH_ACORN
- .pref = 20,
-#else
.pref = 0,
-#endif
};
--
2.53.0
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 06/13] ARM: omap2: remove omap24xx support
[not found] <20260908152808.3928630-1-arnd@kernel.org>
2026-09-08 15:27 ` [PATCH 03/13] ARM: remove riscpc Arnd Bergmann
@ 2026-09-08 15:27 ` Arnd Bergmann
2026-09-08 17:18 ` Aaro Koskinen
` (3 more replies)
1 sibling, 4 replies; 20+ messages in thread
From: Arnd Bergmann @ 2026-09-08 15:27 UTC (permalink / raw)
To: Krzysztof Kozlowski, Alexandre Belloni, Linus Walleij,
Russell King
Cc: Drew Fustini, Arnd Bergmann, Rob Herring, Conor Dooley,
Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Vladimir Zapolskiy, Stefan Agner, Maxime Coquelin,
Alexandre Torgue, Aaro Koskinen, Andreas Kemnade, Kevin Hilman,
Roger Quadros, Tony Lindgren, Nicolas Ferre, Claudiu Beznea,
Andrew Lunn, Sebastian Hesselbarth, Gregory Clement,
Robert Jarzmik, Kristoffer Ericson, Ethan Nelson-Moore,
Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo,
Karl Mehltretter, David Hildenbrand (Arm), Nicolas Pitre,
linux-doc, linux-kernel, linux-arm-kernel, devicetree, imx,
linux-stm32, linux-omap, Paul Walmsley, Herbert Xu,
David S. Miller, Mauro Carvalho Chehab, Kyungmin Park,
Helge Deller, Tero Kristo, Stephen Boyd, Thomas Zimmermann,
linux-media, linux-mtd, linux-fbdev, dri-devel, linux-clk
From: Arnd Bergmann <arnd@arndb.de>
The omap24xx SoC platform was used in the Nokia N800 and N810 tablets
released on 2007 and was among the first ARMv6 CPUs in products that
made it into products.
Unfortunately the early ARM1136r0 CPU cores had a number of quirks that
caused a disproportionate amount of work to keep them compatible with
later ARMv6K/v7/v8 implementations.
Drop the support for this SoC in order to allow removing ARM1136r0.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Andreas Kemnade <andreas@kemnade.info>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Roger Quadros <rogerq@kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Tero Kristo <kristo@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-clk@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
MAINTAINERS | 2 -
arch/arm/boot/dts/ti/omap/Makefile | 6 -
arch/arm/boot/dts/ti/omap/omap2.dtsi | 338 -----
.../arm/boot/dts/ti/omap/omap2420-clocks.dtsi | 267 ----
arch/arm/boot/dts/ti/omap/omap2420-h4.dts | 63 -
arch/arm/boot/dts/ti/omap/omap2420-n800.dts | 9 -
.../boot/dts/ti/omap/omap2420-n810-wimax.dts | 9 -
arch/arm/boot/dts/ti/omap/omap2420-n810.dts | 75 -
.../dts/ti/omap/omap2420-n8x0-common.dtsi | 123 --
arch/arm/boot/dts/ti/omap/omap2420.dtsi | 262 ----
.../arm/boot/dts/ti/omap/omap2430-clocks.dtsi | 341 -----
arch/arm/boot/dts/ti/omap/omap2430-sdp.dts | 70 -
arch/arm/boot/dts/ti/omap/omap2430.dtsi | 366 -----
.../arm/boot/dts/ti/omap/omap24xx-clocks.dtsi | 1241 -----------------
arch/arm/configs/omap2plus_defconfig | 2 -
arch/arm/mach-omap2/Kconfig | 62 +-
arch/arm/mach-omap2/Makefile | 63 +-
arch/arm/mach-omap2/board-generic.c | 34 -
arch/arm/mach-omap2/board-n8x0.c | 512 -------
arch/arm/mach-omap2/clkt2xxx_dpll.c | 56 -
arch/arm/mach-omap2/clkt2xxx_dpllcore.c | 194 ---
arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 259 ----
arch/arm/mach-omap2/clock.c | 12 +-
arch/arm/mach-omap2/clock2xxx.h | 17 -
arch/arm/mach-omap2/clockdomain.c | 4 +-
arch/arm/mach-omap2/clockdomain.h | 5 -
arch/arm/mach-omap2/clockdomains2420_data.c | 154 --
arch/arm/mach-omap2/clockdomains2430_data.c | 181 ---
.../mach-omap2/clockdomains2xxx_3xxx_data.c | 29 +-
arch/arm/mach-omap2/cm-regbits-24xx.h | 51 -
arch/arm/mach-omap2/cm2xxx.c | 302 ----
arch/arm/mach-omap2/cm2xxx.h | 60 -
arch/arm/mach-omap2/cm_common.c | 12 -
arch/arm/mach-omap2/common-board-devices.h | 11 -
arch/arm/mach-omap2/common.h | 12 -
arch/arm/mach-omap2/control.h | 56 -
arch/arm/mach-omap2/display.c | 4 +-
arch/arm/mach-omap2/dma.c | 53 +-
arch/arm/mach-omap2/fb.c | 14 +-
arch/arm/mach-omap2/gpmc.h | 10 -
arch/arm/mach-omap2/i2c.c | 2 +-
arch/arm/mach-omap2/id.c | 80 +-
arch/arm/mach-omap2/io.c | 140 +-
arch/arm/mach-omap2/iomap.h | 46 -
arch/arm/mach-omap2/l3_2xxx.h | 15 -
arch/arm/mach-omap2/l4_2xxx.h | 19 -
arch/arm/mach-omap2/mmc.h | 18 -
arch/arm/mach-omap2/msdi.c | 75 -
arch/arm/mach-omap2/omap2-restart.c | 62 -
arch/arm/mach-omap2/omap24xx.h | 73 -
arch/arm/mach-omap2/omap_hwmod.c | 18 +-
arch/arm/mach-omap2/omap_hwmod.h | 2 -
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 402 ------
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 606 --------
.../omap_hwmod_2xxx_interconnect_data.c | 256 ----
.../mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 668 ---------
arch/arm/mach-omap2/omap_hwmod_common_data.h | 66 -
arch/arm/mach-omap2/opp2420_data.c | 131 --
arch/arm/mach-omap2/opp2430_data.c | 136 --
arch/arm/mach-omap2/opp2xxx.h | 430 ------
arch/arm/mach-omap2/pdata-quirks.c | 35 +-
arch/arm/mach-omap2/pm.h | 5 -
arch/arm/mach-omap2/powerdomain.h | 3 -
arch/arm/mach-omap2/powerdomains2xxx_data.c | 134 --
arch/arm/mach-omap2/prcm-common.h | 147 --
arch/arm/mach-omap2/prm-regbits-24xx.h | 39 -
arch/arm/mach-omap2/prm2xxx.c | 229 ---
arch/arm/mach-omap2/prm2xxx.h | 128 --
arch/arm/mach-omap2/prm2xxx_3xxx.c | 1 -
arch/arm/mach-omap2/prm_common.c | 11 -
arch/arm/mach-omap2/sdrc.h | 21 -
arch/arm/mach-omap2/sdrc2xxx.c | 164 ---
arch/arm/mach-omap2/sleep24xx.S | 91 --
arch/arm/mach-omap2/soc.h | 59 -
arch/arm/mach-omap2/sram.c | 159 +--
arch/arm/mach-omap2/sram.h | 32 -
arch/arm/mach-omap2/sram242x.S | 317 -----
arch/arm/mach-omap2/sram243x.S | 317 -----
arch/arm/mach-omap2/usb-tusb6010.c | 217 ---
arch/arm/mach-omap2/usb-tusb6010.h | 12 -
arch/arm/mach-omap2/voltagedomains2xxx_data.c | 29 -
drivers/crypto/Kconfig | 2 +-
drivers/media/platform/ti/omap/Kconfig | 4 +-
drivers/mtd/nand/onenand/Kconfig | 4 +-
drivers/video/fbdev/omap2/omapfb/Kconfig | 2 +-
include/linux/clk/ti.h | 8 -
86 files changed, 60 insertions(+), 10696 deletions(-)
delete mode 100644 arch/arm/boot/dts/ti/omap/omap2.dtsi
delete mode 100644 arch/arm/boot/dts/ti/omap/omap2420-clocks.dtsi
delete mode 100644 arch/arm/boot/dts/ti/omap/omap2420-h4.dts
delete mode 100644 arch/arm/boot/dts/ti/omap/omap2420-n800.dts
delete mode 100644 arch/arm/boot/dts/ti/omap/omap2420-n810-wimax.dts
delete mode 100644 arch/arm/boot/dts/ti/omap/omap2420-n810.dts
delete mode 100644 arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi
delete mode 100644 arch/arm/boot/dts/ti/omap/omap2420.dtsi
delete mode 100644 arch/arm/boot/dts/ti/omap/omap2430-clocks.dtsi
delete mode 100644 arch/arm/boot/dts/ti/omap/omap2430-sdp.dts
delete mode 100644 arch/arm/boot/dts/ti/omap/omap2430.dtsi
delete mode 100644 arch/arm/boot/dts/ti/omap/omap24xx-clocks.dtsi
delete mode 100644 arch/arm/mach-omap2/board-n8x0.c
delete mode 100644 arch/arm/mach-omap2/clkt2xxx_dpll.c
delete mode 100644 arch/arm/mach-omap2/clkt2xxx_dpllcore.c
delete mode 100644 arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
delete mode 100644 arch/arm/mach-omap2/clock2xxx.h
delete mode 100644 arch/arm/mach-omap2/clockdomains2420_data.c
delete mode 100644 arch/arm/mach-omap2/clockdomains2430_data.c
delete mode 100644 arch/arm/mach-omap2/cm-regbits-24xx.h
delete mode 100644 arch/arm/mach-omap2/cm2xxx.c
delete mode 100644 arch/arm/mach-omap2/cm2xxx.h
delete mode 100644 arch/arm/mach-omap2/common-board-devices.h
delete mode 100644 arch/arm/mach-omap2/gpmc.h
delete mode 100644 arch/arm/mach-omap2/l3_2xxx.h
delete mode 100644 arch/arm/mach-omap2/l4_2xxx.h
delete mode 100644 arch/arm/mach-omap2/mmc.h
delete mode 100644 arch/arm/mach-omap2/msdi.c
delete mode 100644 arch/arm/mach-omap2/omap2-restart.c
delete mode 100644 arch/arm/mach-omap2/omap24xx.h
delete mode 100644 arch/arm/mach-omap2/omap_hwmod_2420_data.c
delete mode 100644 arch/arm/mach-omap2/omap_hwmod_2430_data.c
delete mode 100644 arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
delete mode 100644 arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
delete mode 100644 arch/arm/mach-omap2/opp2420_data.c
delete mode 100644 arch/arm/mach-omap2/opp2430_data.c
delete mode 100644 arch/arm/mach-omap2/opp2xxx.h
delete mode 100644 arch/arm/mach-omap2/powerdomains2xxx_data.c
delete mode 100644 arch/arm/mach-omap2/prm-regbits-24xx.h
delete mode 100644 arch/arm/mach-omap2/prm2xxx.c
delete mode 100644 arch/arm/mach-omap2/prm2xxx.h
delete mode 100644 arch/arm/mach-omap2/sdrc2xxx.c
delete mode 100644 arch/arm/mach-omap2/sleep24xx.S
delete mode 100644 arch/arm/mach-omap2/sram242x.S
delete mode 100644 arch/arm/mach-omap2/sram243x.S
delete mode 100644 arch/arm/mach-omap2/usb-tusb6010.c
delete mode 100644 arch/arm/mach-omap2/usb-tusb6010.h
delete mode 100644 arch/arm/mach-omap2/voltagedomains2xxx_data.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 028db7ad15ad..0d10f778800d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19874,7 +19874,6 @@ M: Jarkko Nikula <jarkko.nikula@bitmer.com>
L: linux-sound@vger.kernel.org
L: linux-omap@vger.kernel.org
S: Maintained
-F: sound/soc/ti/n810.c
F: sound/soc/ti/omap*
F: sound/soc/ti/rx51.c
F: sound/soc/ti/sdma-pcm.*
@@ -20027,7 +20026,6 @@ F: drivers/gpio/gpio-tps65219.c
F: drivers/i2c/busses/i2c-omap.c
F: drivers/irqchip/irq-omap-intc.c
F: drivers/mfd/*omap*.c
-F: drivers/mfd/menelaus.c
F: drivers/mfd/palmas.c
F: drivers/mfd/tps65217.c
F: drivers/mfd/tps65218.c
diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile
index 498c36ccb5ea..3c5d378df6b9 100644
--- a/arch/arm/boot/dts/ti/omap/Makefile
+++ b/arch/arm/boot/dts/ti/omap/Makefile
@@ -1,10 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_OMAP2) += \
- omap2420-h4.dtb \
- omap2420-n800.dtb \
- omap2420-n810.dtb \
- omap2420-n810-wimax.dtb \
- omap2430-sdp.dtb
dtb-$(CONFIG_ARCH_OMAP3) += \
am3517-craneboard.dtb \
am3517-evm.dtb \
diff --git a/arch/arm/boot/dts/ti/omap/omap2.dtsi b/arch/arm/boot/dts/ti/omap/omap2.dtsi
deleted file mode 100644
index fdc1790adf43..000000000000
--- a/arch/arm/boot/dts/ti/omap/omap2.dtsi
+++ /dev/null
@@ -1,338 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP2 SoC
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/bus/ti-sysc.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/omap.h>
-
-/ {
- compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
- interrupt-parent = <&intc>;
- #address-cells = <1>;
- #size-cells = <1>;
- chosen { };
-
- aliases {
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- i2c0 = &i2c1;
- i2c1 = &i2c2;
- };
-
- cpus {
- #address-cells = <0>;
- #size-cells = <0>;
-
- cpu {
- compatible = "arm,arm1136jf-s";
- device_type = "cpu";
- };
- };
-
- pmu {
- compatible = "arm,arm1136-pmu";
- interrupts = <3>;
- };
-
- soc {
- compatible = "ti,omap-infra";
- mpu {
- compatible = "ti,omap2-mpu";
- ti,hwmods = "mpu";
- };
- };
-
- ocp {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- ti,hwmods = "l3_main";
-
- aes: aes@480a6000 {
- compatible = "ti,omap2-aes";
- ti,hwmods = "aes";
- reg = <0x480a6000 0x50>;
- dmas = <&sdma 9 &sdma 10>;
- dma-names = "tx", "rx";
- };
-
- hdq1w: 1w@480b2000 {
- compatible = "ti,omap2420-1w";
- ti,hwmods = "hdq1w";
- reg = <0x480b2000 0x1000>;
- interrupts = <58>;
- };
-
- intc: interrupt-controller@1 {
- compatible = "ti,omap2-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x480FE000 0x1000>;
- };
-
- target-module@48056000 {
- compatible = "ti,sysc-omap2", "ti,sysc";
- reg = <0x48056000 0x4>,
- <0x4805602c 0x4>,
- <0x48056028 0x4>;
- reg-names = "rev", "sysc", "syss";
- ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
- SYSC_OMAP2_EMUFREE |
- SYSC_OMAP2_SOFTRESET |
- SYSC_OMAP2_AUTOIDLE)>;
- ti,sysc-midle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>;
- ti,syss-mask = <1>;
- clocks = <&core_l3_ck>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x48056000 0x1000>;
-
- sdma: dma-controller@0 {
- compatible = "ti,omap2420-sdma", "ti,omap-sdma";
- reg = <0 0x1000>;
- interrupts = <12>,
- <13>,
- <14>,
- <15>;
- #dma-cells = <1>;
- dma-channels = <32>;
- dma-requests = <64>;
- };
- };
-
- i2c1: i2c@48070000 {
- compatible = "ti,omap2-i2c";
- ti,hwmods = "i2c1";
- reg = <0x48070000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <56>;
- };
-
- i2c2: i2c@48072000 {
- compatible = "ti,omap2-i2c";
- ti,hwmods = "i2c2";
- reg = <0x48072000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <57>;
- };
-
- mcspi1: spi@48098000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "ti,omap2-mcspi";
- ti,hwmods = "mcspi1";
- reg = <0x48098000 0x100>;
- interrupts = <65>;
- dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38
- &sdma 39 &sdma 40 &sdma 41 &sdma 42>;
- dma-names = "tx0", "rx0", "tx1", "rx1",
- "tx2", "rx2", "tx3", "rx3";
- };
-
- mcspi2: spi@4809a000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "ti,omap2-mcspi";
- ti,hwmods = "mcspi2";
- reg = <0x4809a000 0x100>;
- interrupts = <66>;
- dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>;
- dma-names = "tx0", "rx0", "tx1", "rx1";
- };
-
- rng: rng@480a0000 {
- compatible = "ti,omap2-rng";
- ti,hwmods = "rng";
- reg = <0x480a0000 0x50>;
- interrupts = <52>;
- };
-
- sham: sham@480a4000 {
- compatible = "ti,omap2-sham";
- ti,hwmods = "sham";
- reg = <0x480a4000 0x64>;
- interrupts = <51>;
- dmas = <&sdma 13>;
- dma-names = "rx";
- };
-
- uart1: serial@4806a000 {
- compatible = "ti,omap2-uart";
- ti,hwmods = "uart1";
- reg = <0x4806a000 0x2000>;
- interrupts = <72>;
- dmas = <&sdma 49 &sdma 50>;
- dma-names = "tx", "rx";
- clock-frequency = <48000000>;
- };
-
- uart2: serial@4806c000 {
- compatible = "ti,omap2-uart";
- ti,hwmods = "uart2";
- reg = <0x4806c000 0x400>;
- interrupts = <73>;
- dmas = <&sdma 51 &sdma 52>;
- dma-names = "tx", "rx";
- clock-frequency = <48000000>;
- };
-
- uart3: serial@4806e000 {
- compatible = "ti,omap2-uart";
- ti,hwmods = "uart3";
- reg = <0x4806e000 0x400>;
- interrupts = <74>;
- dmas = <&sdma 53 &sdma 54>;
- dma-names = "tx", "rx";
- clock-frequency = <48000000>;
- };
-
- timer2_target: target-module@4802a000 {
- compatible = "ti,sysc-omap2-timer", "ti,sysc";
- reg = <0x4802a000 0x4>,
- <0x4802a010 0x4>,
- <0x4802a014 0x4>;
- reg-names = "rev", "sysc", "syss";
- ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
- SYSC_OMAP2_EMUFREE |
- SYSC_OMAP2_ENAWAKEUP |
- SYSC_OMAP2_SOFTRESET |
- SYSC_OMAP2_AUTOIDLE)>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>;
- ti,syss-mask = <1>;
- clocks = <&gpt2_fck>, <&gpt2_ick>;
- clock-names = "fck", "ick";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x4802a000 0x1000>;
-
- timer2: timer@0 {
- compatible = "ti,omap2420-timer";
- reg = <0 0x400>;
- interrupts = <38>;
- };
- };
-
- timer3: timer@48078000 {
- compatible = "ti,omap2420-timer";
- reg = <0x48078000 0x400>;
- interrupts = <39>;
- ti,hwmods = "timer3";
- };
-
- timer4: timer@4807a000 {
- compatible = "ti,omap2420-timer";
- reg = <0x4807a000 0x400>;
- interrupts = <40>;
- ti,hwmods = "timer4";
- };
-
- timer5: timer@4807c000 {
- compatible = "ti,omap2420-timer";
- reg = <0x4807c000 0x400>;
- interrupts = <41>;
- ti,hwmods = "timer5";
- ti,timer-dsp;
- };
-
- timer6: timer@4807e000 {
- compatible = "ti,omap2420-timer";
- reg = <0x4807e000 0x400>;
- interrupts = <42>;
- ti,hwmods = "timer6";
- ti,timer-dsp;
- };
-
- timer7: timer@48080000 {
- compatible = "ti,omap2420-timer";
- reg = <0x48080000 0x400>;
- interrupts = <43>;
- ti,hwmods = "timer7";
- ti,timer-dsp;
- };
-
- timer8: timer@48082000 {
- compatible = "ti,omap2420-timer";
- reg = <0x48082000 0x400>;
- interrupts = <44>;
- ti,hwmods = "timer8";
- ti,timer-dsp;
- };
-
- timer9: timer@48084000 {
- compatible = "ti,omap2420-timer";
- reg = <0x48084000 0x400>;
- interrupts = <45>;
- ti,hwmods = "timer9";
- ti,timer-pwm;
- };
-
- timer10: timer@48086000 {
- compatible = "ti,omap2420-timer";
- reg = <0x48086000 0x400>;
- interrupts = <46>;
- ti,hwmods = "timer10";
- ti,timer-pwm;
- };
-
- timer11: timer@48088000 {
- compatible = "ti,omap2420-timer";
- reg = <0x48088000 0x400>;
- interrupts = <47>;
- ti,hwmods = "timer11";
- ti,timer-pwm;
- };
-
- timer12: timer@4808a000 {
- compatible = "ti,omap2420-timer";
- reg = <0x4808a000 0x400>;
- interrupts = <48>;
- ti,hwmods = "timer12";
- ti,timer-pwm;
- };
-
- dss: dss@48050000 {
- compatible = "ti,omap2-dss";
- reg = <0x48050000 0x400>;
- status = "disabled";
- ti,hwmods = "dss_core";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- dispc@48050400 {
- compatible = "ti,omap2-dispc";
- reg = <0x48050400 0x400>;
- interrupts = <25>;
- ti,hwmods = "dss_dispc";
- };
-
- rfbi: encoder@48050800 {
- compatible = "ti,omap2-rfbi";
- reg = <0x48050800 0x400>;
- status = "disabled";
- ti,hwmods = "dss_rfbi";
- };
-
- venc: encoder@48050c00 {
- compatible = "ti,omap2-venc";
- reg = <0x48050c00 0x400>;
- status = "disabled";
- ti,hwmods = "dss_venc";
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/ti/omap/omap2420-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap2420-clocks.dtsi
deleted file mode 100644
index 00a7a199a91c..000000000000
--- a/arch/arm/boot/dts/ti/omap/omap2420-clocks.dtsi
+++ /dev/null
@@ -1,267 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP2420 clock data
- *
- * Copyright (C) 2014 Texas Instruments, Inc.
- */
-
-&prcm_clocks {
- sys_clkout2_src_gate: sys_clkout2_src_gate@70 {
- #clock-cells = <0>;
- compatible = "ti,composite-no-wait-gate-clock";
- clocks = <&core_ck>;
- ti,bit-shift = <15>;
- reg = <0x0070>;
- };
-
- sys_clkout2_src_mux: sys_clkout2_src_mux@70 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
- ti,bit-shift = <8>;
- reg = <0x0070>;
- };
-
- sys_clkout2_src: sys_clkout2_src {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&sys_clkout2_src_gate>, <&sys_clkout2_src_mux>;
- };
-
- sys_clkout2: sys_clkout2@70 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&sys_clkout2_src>;
- ti,bit-shift = <11>;
- ti,max-div = <64>;
- reg = <0x0070>;
- ti,index-power-of-two;
- };
-
- dsp_gate_ick: dsp_gate_ick@810 {
- #clock-cells = <0>;
- compatible = "ti,composite-interface-clock";
- clocks = <&dsp_fck>;
- ti,bit-shift = <1>;
- reg = <0x0810>;
- };
-
- dsp_div_ick: dsp_div_ick@840 {
- #clock-cells = <0>;
- compatible = "ti,composite-divider-clock";
- clocks = <&dsp_fck>;
- ti,bit-shift = <5>;
- ti,max-div = <3>;
- reg = <0x0840>;
- ti,index-starts-at-one;
- };
-
- dsp_ick: dsp_ick {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&dsp_gate_ick>, <&dsp_div_ick>;
- };
-
- iva1_gate_ifck: iva1_gate_ifck@800 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&core_ck>;
- ti,bit-shift = <10>;
- reg = <0x0800>;
- };
-
- iva1_div_ifck: iva1_div_ifck@840 {
- #clock-cells = <0>;
- compatible = "ti,composite-divider-clock";
- clocks = <&core_ck>;
- ti,bit-shift = <8>;
- reg = <0x0840>;
- ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
- };
-
- iva1_ifck: iva1_ifck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&iva1_gate_ifck>, <&iva1_div_ifck>;
- };
-
- iva1_ifck_div: iva1_ifck_div {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&iva1_ifck>;
- clock-mult = <1>;
- clock-div = <2>;
- };
-
- iva1_mpu_int_ifck: iva1_mpu_int_ifck@800 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&iva1_ifck_div>;
- ti,bit-shift = <8>;
- reg = <0x0800>;
- };
-
- wdt3_ick: wdt3_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <28>;
- reg = <0x0210>;
- };
-
- wdt3_fck: wdt3_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_32k_ck>;
- ti,bit-shift = <28>;
- reg = <0x0200>;
- };
-
- mmc_ick: mmc_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <26>;
- reg = <0x0210>;
- };
-
- mmc_fck: mmc_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_96m_ck>;
- ti,bit-shift = <26>;
- reg = <0x0200>;
- };
-
- eac_ick: eac_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <24>;
- reg = <0x0210>;
- };
-
- eac_fck: eac_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_96m_ck>;
- ti,bit-shift = <24>;
- reg = <0x0200>;
- };
-
- i2c1_fck: i2c1_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_12m_ck>;
- ti,bit-shift = <19>;
- reg = <0x0200>;
- };
-
- i2c2_fck: i2c2_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_12m_ck>;
- ti,bit-shift = <20>;
- reg = <0x0200>;
- };
-
- vlynq_ick: vlynq_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l3_ck>;
- ti,bit-shift = <3>;
- reg = <0x0210>;
- };
-
- vlynq_gate_fck: vlynq_gate_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&core_ck>;
- ti,bit-shift = <3>;
- reg = <0x0200>;
- };
-
- core_d18_ck: core_d18_ck {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&core_ck>;
- clock-mult = <1>;
- clock-div = <18>;
- };
-
- vlynq_mux_fck: vlynq_mux_fck@240 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&func_96m_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&dummy_ck>, <&core_d6_ck>, <&dummy_ck>, <&core_d8_ck>, <&core_d9_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d12_ck>, <&dummy_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d16_ck>, <&dummy_ck>, <&core_d18_ck>;
- ti,bit-shift = <15>;
- reg = <0x0240>;
- };
-
- vlynq_fck: vlynq_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&vlynq_gate_fck>, <&vlynq_mux_fck>;
- };
-};
-
-&prcm_clockdomains {
- gfx_clkdm: gfx_clkdm {
- compatible = "ti,clockdomain";
- clocks = <&gfx_ick>;
- };
-
- core_l3_clkdm: core_l3_clkdm {
- compatible = "ti,clockdomain";
- clocks = <&cam_fck>, <&vlynq_ick>, <&usb_fck>;
- };
-
- wkup_clkdm: wkup_clkdm {
- compatible = "ti,clockdomain";
- clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
- <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
- <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>;
- };
-
- iva1_clkdm: iva1_clkdm {
- compatible = "ti,clockdomain";
- clocks = <&iva1_mpu_int_ifck>;
- };
-
- dss_clkdm: dss_clkdm {
- compatible = "ti,clockdomain";
- clocks = <&dss_ick>, <&dss_54m_fck>;
- };
-
- core_l4_clkdm: core_l4_clkdm {
- compatible = "ti,clockdomain";
- clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
- <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
- <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
- <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcspi1_ick>,
- <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
- <&uart1_ick>, <&uart1_fck>, <&uart2_ick>, <&uart2_fck>,
- <&uart3_ick>, <&uart3_fck>, <&cam_ick>,
- <&mailboxes_ick>, <&wdt4_ick>, <&wdt4_fck>,
- <&wdt3_ick>, <&wdt3_fck>, <&mspro_ick>, <&mspro_fck>,
- <&mmc_ick>, <&mmc_fck>, <&fac_ick>, <&fac_fck>,
- <&eac_ick>, <&eac_fck>, <&hdq_ick>, <&hdq_fck>,
- <&i2c1_ick>, <&i2c1_fck>, <&i2c2_ick>, <&i2c2_fck>,
- <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
- <&pka_ick>;
- };
-};
-
-&func_96m_ck {
- compatible = "fixed-factor-clock";
- clocks = <&apll96_ck>;
- clock-mult = <1>;
- clock-div = <1>;
-};
-
-&dsp_div_fck {
- ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
-};
-
-&ssi_ssr_sst_div_fck {
- ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
-};
diff --git a/arch/arm/boot/dts/ti/omap/omap2420-h4.dts b/arch/arm/boot/dts/ti/omap/omap2420-h4.dts
deleted file mode 100644
index 5acf5dd87c59..000000000000
--- a/arch/arm/boot/dts/ti/omap/omap2420-h4.dts
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap2420.dtsi"
-
-/ {
- model = "TI OMAP2420 H4 board";
- compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x80000000 0x4000000>; /* 64 MB */
- };
-};
-
-&gpmc {
- ranges = <0 0 0x08000000 0x04000000>;
-
- nor@0,0 {
- compatible = "cfi-flash";
- linux,mtd-name = "intel,ge28f256l18b85";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0 0 0x04000000>;
- bank-width = <2>;
-
- gpmc,mux-add-data = <2>;
- gpmc,cs-on-ns = <10>;
- gpmc,cs-rd-off-ns = <160>;
- gpmc,cs-wr-off-ns = <160>;
- gpmc,adv-on-ns = <20>;
- gpmc,adv-rd-off-ns = <50>;
- gpmc,adv-wr-off-ns = <50>;
- gpmc,oe-on-ns = <60>;
- gpmc,oe-off-ns = <120>;
- gpmc,we-on-ns = <60>;
- gpmc,we-off-ns = <120>;
- gpmc,rd-cycle-ns = <170>;
- gpmc,wr-cycle-ns = <170>;
- gpmc,access-ns = <150>;
- gpmc,page-burst-access-ns = <10>;
-
- partition@0 {
- label = "bootloader";
- reg = <0 0x20000>;
- };
- partition@20000 {
- label = "params";
- reg = <0x20000 0x20000>;
- };
- partition@40000 {
- label = "kernel";
- reg = <0x40000 0x200000>;
- };
- partition@240000 {
- label = "file-system";
- reg = <0x240000 0x3dc0000>;
- };
- };
-};
diff --git a/arch/arm/boot/dts/ti/omap/omap2420-n800.dts b/arch/arm/boot/dts/ti/omap/omap2420-n800.dts
deleted file mode 100644
index f06d767e818b..000000000000
--- a/arch/arm/boot/dts/ti/omap/omap2420-n800.dts
+++ /dev/null
@@ -1,9 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "omap2420-n8x0-common.dtsi"
-
-/ {
- model = "Nokia N800";
- compatible = "nokia,n800", "nokia,n8x0", "ti,omap2420", "ti,omap2";
-};
diff --git a/arch/arm/boot/dts/ti/omap/omap2420-n810-wimax.dts b/arch/arm/boot/dts/ti/omap/omap2420-n810-wimax.dts
deleted file mode 100644
index ac9acbd609b6..000000000000
--- a/arch/arm/boot/dts/ti/omap/omap2420-n810-wimax.dts
+++ /dev/null
@@ -1,9 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "omap2420-n8x0-common.dtsi"
-
-/ {
- model = "Nokia N810 WiMax";
- compatible = "nokia,n810-wimax", "nokia,n8x0", "ti,omap2420", "ti,omap2";
-};
diff --git a/arch/arm/boot/dts/ti/omap/omap2420-n810.dts b/arch/arm/boot/dts/ti/omap/omap2420-n810.dts
deleted file mode 100644
index 3bf8175d85a8..000000000000
--- a/arch/arm/boot/dts/ti/omap/omap2420-n810.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "omap2420-n8x0-common.dtsi"
-
-/ {
- model = "Nokia N810";
- compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2";
-
- vio_ape: vio_ape {
- compatible = "regulator-fixed";
- regulator-name = "vio_ape";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- v28_aic: v28_aic {
- compatible = "regulator-fixed";
- regulator-name = "v28_aic";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-};
-
-&omap2420_pmx {
- mcbsp2_pins: mcbsp2-pins {
- pinctrl-single,pins = <
- OMAP2420_CORE_IOPAD(0x0124, PIN_INPUT | MUX_MODE1) /* eac_ac_sclk.mcbsp2_clkx */
- OMAP2420_CORE_IOPAD(0x0125, PIN_INPUT | MUX_MODE1) /* eac_ac_fs.mcbsp2_fsx */
- OMAP2420_CORE_IOPAD(0x0126, PIN_INPUT | MUX_MODE1) /* eac_ac_din.mcbsp2_dr */
- OMAP2420_CORE_IOPAD(0x0127, PIN_OUTPUT | MUX_MODE1) /* eac_ac_dout.mcbsp2_dx */
- >;
- };
-
- aic33_pins: aic33-pins {
- pinctrl-single,pins = <
- OMAP2420_CORE_IOPAD(0x0129, PIN_OUTPUT | MUX_MODE3) /* eac_ac_rst.gpio118 */
- OMAP2420_CORE_IOPAD(0x00e8, PIN_OUTPUT | MUX_MODE2) /* vlynq_tx1.sys_clkout2 */
- >;
- };
-};
-
-&i2c2 {
- aic33@18 {
- compatible = "ti,tlv320aic33";
- reg = <0x18>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&aic33_pins>;
-
- reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */
-
- ai3x-gpio-func = <
- 10 /* AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK */
- 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
- >;
- ai3x-micbias-vg = <1>; /* 2V */
-
- AVDD-supply = <&v28_aic>;
- DRVDD-supply = <&v28_aic>;
- IOVDD-supply = <&vio_ape>;
- DVDD-supply = <&vio_ape>;
-
- assigned-clocks = <&sys_clkout2_src>, <&sys_clkout2>;
- assigned-clock-parents = <&func_96m_ck>;
- assigned-clock-rates = <0>, <12000000>;
- };
-};
-
-&mcbsp2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcbsp2_pins>;
-
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi
deleted file mode 100644
index fe9dd8bbfc85..000000000000
--- a/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "omap2420.dtsi"
-
-/ {
- memory@80000000 {
- device_type = "memory";
- reg = <0x80000000 0x8000000>; /* 128 MB */
- };
-
- chosen {
- stdout-path = &uart3;
- };
-
- ocp {
- i2c0 {
- compatible = "i2c-cbus-gpio";
- gpios = <&gpio3 2 GPIO_ACTIVE_HIGH /* gpio66 clk */
- &gpio3 1 GPIO_ACTIVE_HIGH /* gpio65 dat */
- &gpio3 0 GPIO_ACTIVE_HIGH /* gpio64 sel */
- >;
- #address-cells = <1>;
- #size-cells = <0>;
- retu: retu@1 {
- compatible = "nokia,retu";
- interrupt-parent = <&gpio4>;
- interrupts = <12 IRQ_TYPE_EDGE_RISING>;
- reg = <0x1>;
- };
- };
- };
-};
-
-&i2c1 {
- clock-frequency = <400000>;
-
- pmic@72 {
- compatible = "menelaus";
- reg = <0x72>;
- interrupts = <7 IRQ_TYPE_EDGE_RISING>;
- };
-};
-
-&i2c2 {
- clock-frequency = <400000>;
-};
-
-&gpmc {
- ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */
-
- /* gpio-irq for dma: 26 */
-
- onenand@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "ti,omap2-onenand";
- reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
-
- gpmc,sync-read;
- gpmc,burst-length = <16>;
- gpmc,burst-read;
- gpmc,burst-wrap;
- gpmc,device-width = <2>;
- gpmc,mux-add-data = <2>;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <127>;
- gpmc,cs-wr-off-ns = <109>;
- gpmc,adv-on-ns = <0>;
- gpmc,adv-rd-off-ns = <18>;
- gpmc,adv-wr-off-ns = <18>;
- gpmc,oe-on-ns = <27>;
- gpmc,oe-off-ns = <127>;
- gpmc,we-on-ns = <27>;
- gpmc,we-off-ns = <72>;
- gpmc,rd-cycle-ns = <145>;
- gpmc,wr-cycle-ns = <136>;
- gpmc,access-ns = <118>;
- gpmc,page-burst-access-ns = <27>;
- gpmc,bus-turnaround-ns = <0>;
- gpmc,cycle2cycle-delay-ns = <0>;
- gpmc,wait-monitoring-ns = <0>;
- gpmc,clk-activation-ns = <9>;
- gpmc,sync-clk-ps = <27000>;
-
- /* MTD partition table corresponding to old board-n8x0 file. */
- partition@0 {
- label = "bootloader";
- reg = <0x00000000 0x00020000>;
- read-only;
- };
- partition@1 {
- label = "config";
- reg = <0x00020000 0x00060000>;
- };
- partition@2 {
- label = "kernel";
- reg = <0x00080000 0x00200000>;
- };
- partition@3 {
- label = "initfs";
- reg = <0x00280000 0x00400000>;
- };
- partition@4 {
- label = "rootfs";
- reg = <0x00680000 0x0f980000>;
- };
- partition@5 {
- label = "omap2-onenand";
- reg = <0x00000000 0x10000000>;
- };
- };
-};
-
-&mcspi2 {
- status = "okay";
-
- wifi@0 {
- reg = <0>;
- compatible = "st,stlc4560";
- spi-max-frequency = <48000000>;
- interrupts-extended = <&gpio3 23 IRQ_TYPE_EDGE_RISING>;
- powerdown-gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* gpio 97 */
- };
-};
diff --git a/arch/arm/boot/dts/ti/omap/omap2420.dtsi b/arch/arm/boot/dts/ti/omap/omap2420.dtsi
deleted file mode 100644
index 821da51cb870..000000000000
--- a/arch/arm/boot/dts/ti/omap/omap2420.dtsi
+++ /dev/null
@@ -1,262 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP2420 SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "omap2.dtsi"
-
-/ {
- compatible = "ti,omap2420", "ti,omap2";
-
- ocp {
- l4: l4@48000000 {
- compatible = "ti,omap2-l4", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x48000000 0x100000>;
-
- prcm: prcm@8000 {
- compatible = "ti,omap2-prcm";
- reg = <0x8000 0x1000>;
-
- prcm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- prcm_clockdomains: clockdomains {
- };
- };
-
- scm: scm@0 {
- compatible = "ti,omap2-scm", "simple-bus";
- reg = <0x0 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- #pinctrl-cells = <1>;
- ranges = <0 0x0 0x1000>;
-
- omap2420_pmx: pinmux@30 {
- compatible = "ti,omap2420-padconf",
- "pinctrl-single";
- reg = <0x30 0x0113>;
- #address-cells = <1>;
- #size-cells = <0>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <8>;
- pinctrl-single,function-mask = <0x3f>;
- };
-
- scm_conf: scm_conf@270 {
- compatible = "syscon";
- reg = <0x270 0x100>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- scm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- scm_clockdomains: clockdomains {
- };
- };
-
- target-module@4000 {
- compatible = "ti,sysc-omap2", "ti,sysc";
- reg = <0x4000 0x4>,
- <0x4004 0x4>;
- reg-names = "rev", "sysc";
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>;
- clocks = <&func_32k_ck>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x4000 0x1000>;
-
- counter32k: counter@0 {
- compatible = "ti,omap-counter32k";
- reg = <0 0x20>;
- };
- };
- };
-
- gpio1: gpio@48018000 {
- compatible = "ti,omap2-gpio";
- reg = <0x48018000 0x200>;
- interrupts = <29>;
- ti,hwmods = "gpio1";
- ti,gpio-always-on;
- #gpio-cells = <2>;
- gpio-controller;
- #interrupt-cells = <2>;
- interrupt-controller;
- };
-
- gpio2: gpio@4801a000 {
- compatible = "ti,omap2-gpio";
- reg = <0x4801a000 0x200>;
- interrupts = <30>;
- ti,hwmods = "gpio2";
- ti,gpio-always-on;
- #gpio-cells = <2>;
- gpio-controller;
- #interrupt-cells = <2>;
- interrupt-controller;
- };
-
- gpio3: gpio@4801c000 {
- compatible = "ti,omap2-gpio";
- reg = <0x4801c000 0x200>;
- interrupts = <31>;
- ti,hwmods = "gpio3";
- ti,gpio-always-on;
- #gpio-cells = <2>;
- gpio-controller;
- #interrupt-cells = <2>;
- interrupt-controller;
- };
-
- gpio4: gpio@4801e000 {
- compatible = "ti,omap2-gpio";
- reg = <0x4801e000 0x200>;
- interrupts = <32>;
- ti,hwmods = "gpio4";
- ti,gpio-always-on;
- #gpio-cells = <2>;
- gpio-controller;
- #interrupt-cells = <2>;
- interrupt-controller;
- };
-
- gpmc: gpmc@6800a000 {
- compatible = "ti,omap2420-gpmc";
- reg = <0x6800a000 0x1000>;
- #address-cells = <2>;
- #size-cells = <1>;
- interrupts = <20>;
- gpmc,num-cs = <8>;
- gpmc,num-waitpins = <4>;
- ti,hwmods = "gpmc";
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- mcbsp1: mcbsp@48074000 {
- compatible = "ti,omap2420-mcbsp";
- reg = <0x48074000 0xff>;
- reg-names = "mpu";
- interrupts = <59>, /* TX interrupt */
- <60>; /* RX interrupt */
- interrupt-names = "tx", "rx";
- ti,hwmods = "mcbsp1";
- dmas = <&sdma 31>,
- <&sdma 32>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- mcbsp2: mcbsp@48076000 {
- compatible = "ti,omap2420-mcbsp";
- reg = <0x48076000 0xff>;
- reg-names = "mpu";
- interrupts = <62>, /* TX interrupt */
- <63>; /* RX interrupt */
- interrupt-names = "tx", "rx";
- ti,hwmods = "mcbsp2";
- dmas = <&sdma 33>,
- <&sdma 34>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- msdi1: mmc@4809c000 {
- compatible = "ti,omap2420-mmc";
- ti,hwmods = "msdi1";
- reg = <0x4809c000 0x80>;
- interrupts = <83>;
- dmas = <&sdma 61 &sdma 62>;
- dma-names = "tx", "rx";
- };
-
- mailbox: mailbox@48094000 {
- compatible = "ti,omap2-mailbox";
- reg = <0x48094000 0x200>;
- interrupts = <26>, <34>;
- ti,hwmods = "mailbox";
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <6>;
- mbox_dsp: mbox-dsp {
- ti,mbox-tx = <0 0 0>;
- ti,mbox-rx = <1 0 0>;
- };
- mbox_iva: mbox-iva {
- ti,mbox-tx = <2 1 3>;
- ti,mbox-rx = <3 1 3>;
- };
- };
-
- timer1_target: target-module@48028000 {
- compatible = "ti,sysc-omap2-timer", "ti,sysc";
- reg = <0x48028000 0x4>,
- <0x48028010 0x4>,
- <0x48028014 0x4>;
- reg-names = "rev", "sysc", "syss";
- ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
- SYSC_OMAP2_EMUFREE |
- SYSC_OMAP2_ENAWAKEUP |
- SYSC_OMAP2_SOFTRESET |
- SYSC_OMAP2_AUTOIDLE)>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>;
- ti,syss-mask = <1>;
- clocks = <&gpt1_fck>, <&gpt1_ick>;
- clock-names = "fck", "ick";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x48028000 0x1000>;
-
- timer1: timer@0 {
- compatible = "ti,omap2420-timer";
- reg = <0 0x400>;
- interrupts = <37>;
- ti,timer-alwon;
- };
- };
-
- wd_timer2: wdt@48022000 {
- compatible = "ti,omap2-wdt";
- ti,hwmods = "wd_timer2";
- reg = <0x48022000 0x80>;
- };
- };
-};
-
-&i2c1 {
- compatible = "ti,omap2420-i2c";
-};
-
-&i2c2 {
- compatible = "ti,omap2420-i2c";
-};
-
-#include "omap24xx-clocks.dtsi"
-#include "omap2420-clocks.dtsi"
-
-/* Preferred always-on timer for clockevent */
-&timer1_target {
- ti,no-reset-on-init;
- ti,no-idle;
- timer@0 {
- assigned-clocks = <&gpt1_fck>;
- assigned-clock-parents = <&func_32k_ck>;
- };
-};
diff --git a/arch/arm/boot/dts/ti/omap/omap2430-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap2430-clocks.dtsi
deleted file mode 100644
index 4e5ab5189476..000000000000
--- a/arch/arm/boot/dts/ti/omap/omap2430-clocks.dtsi
+++ /dev/null
@@ -1,341 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP2430 clock data
- *
- * Copyright (C) 2014 Texas Instruments, Inc.
- */
-
-&scm_clocks {
- mcbsp3_mux_fck: mcbsp3_mux_fck@78 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&func_96m_ck>, <&mcbsp_clks>;
- reg = <0x78>;
- };
-
- mcbsp3_fck: mcbsp3_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
- };
-
- mcbsp4_mux_fck: mcbsp4_mux_fck@78 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&func_96m_ck>, <&mcbsp_clks>;
- ti,bit-shift = <2>;
- reg = <0x78>;
- };
-
- mcbsp4_fck: mcbsp4_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
- };
-
- mcbsp5_mux_fck: mcbsp5_mux_fck@78 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&func_96m_ck>, <&mcbsp_clks>;
- ti,bit-shift = <4>;
- reg = <0x78>;
- };
-
- mcbsp5_fck: mcbsp5_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
- };
-};
-
-&prcm_clocks {
- iva2_1_gate_ick: iva2_1_gate_ick@800 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&dsp_fck>;
- ti,bit-shift = <0>;
- reg = <0x0800>;
- };
-
- iva2_1_div_ick: iva2_1_div_ick@840 {
- #clock-cells = <0>;
- compatible = "ti,composite-divider-clock";
- clocks = <&dsp_fck>;
- ti,bit-shift = <5>;
- ti,max-div = <3>;
- reg = <0x0840>;
- ti,index-starts-at-one;
- };
-
- iva2_1_ick: iva2_1_ick {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&iva2_1_gate_ick>, <&iva2_1_div_ick>;
- };
-
- mdm_gate_ick: mdm_gate_ick@c10 {
- #clock-cells = <0>;
- compatible = "ti,composite-interface-clock";
- clocks = <&core_ck>;
- ti,bit-shift = <0>;
- reg = <0x0c10>;
- };
-
- mdm_div_ick: mdm_div_ick@c40 {
- #clock-cells = <0>;
- compatible = "ti,composite-divider-clock";
- clocks = <&core_ck>;
- reg = <0x0c40>;
- ti,dividers = <0>, <1>, <0>, <0>, <4>, <0>, <6>, <0>, <0>, <9>;
- };
-
- mdm_ick: mdm_ick {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&mdm_gate_ick>, <&mdm_div_ick>;
- };
-
- mdm_osc_ck: mdm_osc_ck@c00 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&osc_ck>;
- ti,bit-shift = <1>;
- reg = <0x0c00>;
- };
-
- mcbsp3_ick: mcbsp3_ick@214 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <3>;
- reg = <0x0214>;
- };
-
- mcbsp3_gate_fck: mcbsp3_gate_fck@204 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&mcbsp_clks>;
- ti,bit-shift = <3>;
- reg = <0x0204>;
- };
-
- mcbsp4_ick: mcbsp4_ick@214 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <4>;
- reg = <0x0214>;
- };
-
- mcbsp4_gate_fck: mcbsp4_gate_fck@204 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&mcbsp_clks>;
- ti,bit-shift = <4>;
- reg = <0x0204>;
- };
-
- mcbsp5_ick: mcbsp5_ick@214 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <5>;
- reg = <0x0214>;
- };
-
- mcbsp5_gate_fck: mcbsp5_gate_fck@204 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&mcbsp_clks>;
- ti,bit-shift = <5>;
- reg = <0x0204>;
- };
-
- mcspi3_ick: mcspi3_ick@214 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <9>;
- reg = <0x0214>;
- };
-
- mcspi3_fck: mcspi3_fck@204 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_48m_ck>;
- ti,bit-shift = <9>;
- reg = <0x0204>;
- };
-
- icr_ick: icr_ick@410 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <6>;
- reg = <0x0410>;
- };
-
- i2chs1_fck: i2chs1_fck@204 {
- #clock-cells = <0>;
- compatible = "ti,omap2430-interface-clock";
- clocks = <&func_96m_ck>;
- ti,bit-shift = <19>;
- reg = <0x0204>;
- };
-
- i2chs2_fck: i2chs2_fck@204 {
- #clock-cells = <0>;
- compatible = "ti,omap2430-interface-clock";
- clocks = <&func_96m_ck>;
- ti,bit-shift = <20>;
- reg = <0x0204>;
- };
-
- usbhs_ick: usbhs_ick@214 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l3_ck>;
- ti,bit-shift = <6>;
- reg = <0x0214>;
- };
-
- mmchs1_ick: mmchs1_ick@214 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <7>;
- reg = <0x0214>;
- };
-
- mmchs1_fck: mmchs1_fck@204 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_96m_ck>;
- ti,bit-shift = <7>;
- reg = <0x0204>;
- };
-
- mmchs2_ick: mmchs2_ick@214 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <8>;
- reg = <0x0214>;
- };
-
- mmchs2_fck: mmchs2_fck@204 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_96m_ck>;
- ti,bit-shift = <8>;
- reg = <0x0204>;
- };
-
- gpio5_ick: gpio5_ick@214 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <10>;
- reg = <0x0214>;
- };
-
- gpio5_fck: gpio5_fck@204 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_32k_ck>;
- ti,bit-shift = <10>;
- reg = <0x0204>;
- };
-
- mdm_intc_ick: mdm_intc_ick@214 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <11>;
- reg = <0x0214>;
- };
-
- mmchsdb1_fck: mmchsdb1_fck@204 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_32k_ck>;
- ti,bit-shift = <16>;
- reg = <0x0204>;
- };
-
- mmchsdb2_fck: mmchsdb2_fck@204 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_32k_ck>;
- ti,bit-shift = <17>;
- reg = <0x0204>;
- };
-};
-
-&prcm_clockdomains {
- gfx_clkdm: gfx_clkdm {
- compatible = "ti,clockdomain";
- clocks = <&gfx_ick>;
- };
-
- core_l3_clkdm: core_l3_clkdm {
- compatible = "ti,clockdomain";
- clocks = <&cam_fck>, <&usb_fck>, <&usbhs_ick>;
- };
-
- wkup_clkdm: wkup_clkdm {
- compatible = "ti,clockdomain";
- clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
- <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
- <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>,
- <&icr_ick>;
- };
-
- dss_clkdm: dss_clkdm {
- compatible = "ti,clockdomain";
- clocks = <&dss_ick>, <&dss_54m_fck>;
- };
-
- core_l4_clkdm: core_l4_clkdm {
- compatible = "ti,clockdomain";
- clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
- <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
- <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
- <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
- <&mcbsp4_ick>, <&mcbsp5_ick>, <&mcspi1_ick>,
- <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
- <&mcspi3_ick>, <&mcspi3_fck>, <&uart1_ick>,
- <&uart1_fck>, <&uart2_ick>, <&uart2_fck>, <&uart3_ick>,
- <&uart3_fck>, <&cam_ick>, <&mailboxes_ick>,
- <&wdt4_ick>, <&wdt4_fck>, <&mspro_ick>, <&mspro_fck>,
- <&fac_ick>, <&fac_fck>, <&hdq_ick>, <&hdq_fck>,
- <&i2c1_ick>, <&i2chs1_fck>, <&i2c2_ick>, <&i2chs2_fck>,
- <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
- <&pka_ick>, <&mmchs1_ick>, <&mmchs1_fck>,
- <&mmchs2_ick>, <&mmchs2_fck>, <&gpio5_ick>,
- <&gpio5_fck>, <&mdm_intc_ick>, <&mmchsdb1_fck>,
- <&mmchsdb2_fck>;
- };
-
- mdm_clkdm: mdm_clkdm {
- compatible = "ti,clockdomain";
- clocks = <&mdm_osc_ck>;
- };
-};
-
-&func_96m_ck {
- compatible = "ti,mux-clock";
- clocks = <&apll96_ck>, <&alt_ck>;
- ti,bit-shift = <4>;
- reg = <0x0540>;
-};
-
-&dsp_div_fck {
- ti,max-div = <4>;
- ti,index-starts-at-one;
-};
-
-&ssi_ssr_sst_div_fck {
- ti,max-div = <5>;
- ti,index-starts-at-one;
-};
diff --git a/arch/arm/boot/dts/ti/omap/omap2430-sdp.dts b/arch/arm/boot/dts/ti/omap/omap2430-sdp.dts
deleted file mode 100644
index 207070677e3a..000000000000
--- a/arch/arm/boot/dts/ti/omap/omap2430-sdp.dts
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap2430.dtsi"
-
-/ {
- model = "TI OMAP2430 SDP";
- compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2";
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x80000000 0x8000000>; /* 128 MB */
- };
-};
-
-&i2c2 {
- clock-frequency = <100000>;
-
- twl: twl@48 {
- reg = <0x48>;
- interrupts = <7>; /* SYS_NIRQ cascaded to intc */
- };
-};
-
-#include "twl4030.dtsi"
-
-&mmc1 {
- vmmc-supply = <&vmmc1>;
- bus-width = <4>;
-};
-
-&gpmc {
- ranges = <5 0 0x08000000 0x01000000>;
- ethernet@gpmc {
- compatible = "smsc,lan91c94";
- interrupt-parent = <&gpio5>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>; /* gpio149 */
- reg = <5 0x300 0xf>;
- bank-width = <2>;
- gpmc,sync-clk-ps = <0>;
- gpmc,mux-add-data = <2>;
- gpmc,device-width = <1>;
- gpmc,cycle2cycle-samecsen;
- gpmc,cycle2cycle-diffcsen;
- gpmc,cs-on-ns = <6>;
- gpmc,cs-rd-off-ns = <187>;
- gpmc,cs-wr-off-ns = <187>;
- gpmc,adv-on-ns = <18>;
- gpmc,adv-rd-off-ns = <48>;
- gpmc,adv-wr-off-ns = <48>;
- gpmc,oe-on-ns = <60>;
- gpmc,oe-off-ns = <169>;
- gpmc,we-on-ns = <66>;
- gpmc,we-off-ns = <169>;
- gpmc,rd-cycle-ns = <187>;
- gpmc,wr-cycle-ns = <187>;
- gpmc,access-ns = <187>;
- gpmc,page-burst-access-ns = <24>;
- gpmc,bus-turnaround-ns = <24>;
- gpmc,cycle2cycle-delay-ns = <24>;
- gpmc,wait-monitoring-ns = <0>;
- gpmc,clk-activation-ns = <0>;
- gpmc,wr-data-mux-bus-ns = <0>;
- gpmc,wr-access-ns = <0>;
- };
-};
-
diff --git a/arch/arm/boot/dts/ti/omap/omap2430.dtsi b/arch/arm/boot/dts/ti/omap/omap2430.dtsi
deleted file mode 100644
index 01bd471f9223..000000000000
--- a/arch/arm/boot/dts/ti/omap/omap2430.dtsi
+++ /dev/null
@@ -1,366 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP243x SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "omap2.dtsi"
-
-/ {
- compatible = "ti,omap2430", "ti,omap2";
-
- ocp {
- l4_wkup: l4_wkup@49000000 {
- compatible = "ti,omap2-l4-wkup", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x49000000 0x31000>;
-
- prcm: prcm@6000 {
- compatible = "ti,omap2-prcm";
- reg = <0x6000 0x1000>;
-
- prcm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- prcm_clockdomains: clockdomains {
- };
- };
-
- scm: scm@2000 {
- compatible = "ti,omap2-scm", "simple-bus";
- reg = <0x2000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- #pinctrl-cells = <1>;
- ranges = <0 0x2000 0x1000>;
-
- omap2430_pmx: pinmux@30 {
- compatible = "ti,omap2430-padconf",
- "pinctrl-single";
- reg = <0x30 0x0154>;
- #address-cells = <1>;
- #size-cells = <0>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <8>;
- pinctrl-single,function-mask = <0x3f>;
- };
-
- scm_conf: scm_conf@270 {
- compatible = "ti,omap2-scm-conf", "syscon",
- "simple-bus";
- reg = <0x270 0x240>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x270 0x240>;
-
- scm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- pbias_regulator: pbias_regulator@230 {
- compatible = "ti,pbias-omap2", "ti,pbias-omap";
- reg = <0x230 0x4>;
- syscon = <&scm_conf>;
- pbias_mmc_reg: pbias_mmc_omap2430 {
- regulator-name = "pbias_mmc_omap2430";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- };
- };
- };
-
- scm_clockdomains: clockdomains {
- };
- };
-
- target-module@20000 {
- compatible = "ti,sysc-omap2", "ti,sysc";
- reg = <0x20000 0x4>,
- <0x20004 0x4>;
- reg-names = "rev", "sysc";
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>;
- clocks = <&func_32k_ck>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x20000 0x1000>;
-
- counter32k: counter@0 {
- compatible = "ti,omap-counter32k";
- reg = <0 0x20>;
- };
- };
- };
-
- gpio1: gpio@4900c000 {
- compatible = "ti,omap2-gpio";
- reg = <0x4900c000 0x200>;
- interrupts = <29>;
- ti,hwmods = "gpio1";
- ti,gpio-always-on;
- #gpio-cells = <2>;
- gpio-controller;
- #interrupt-cells = <2>;
- interrupt-controller;
- };
-
- gpio2: gpio@4900e000 {
- compatible = "ti,omap2-gpio";
- reg = <0x4900e000 0x200>;
- interrupts = <30>;
- ti,hwmods = "gpio2";
- ti,gpio-always-on;
- #gpio-cells = <2>;
- gpio-controller;
- #interrupt-cells = <2>;
- interrupt-controller;
- };
-
- gpio3: gpio@49010000 {
- compatible = "ti,omap2-gpio";
- reg = <0x49010000 0x200>;
- interrupts = <31>;
- ti,hwmods = "gpio3";
- ti,gpio-always-on;
- #gpio-cells = <2>;
- gpio-controller;
- #interrupt-cells = <2>;
- interrupt-controller;
- };
-
- gpio4: gpio@49012000 {
- compatible = "ti,omap2-gpio";
- reg = <0x49012000 0x200>;
- interrupts = <32>;
- ti,hwmods = "gpio4";
- ti,gpio-always-on;
- #gpio-cells = <2>;
- gpio-controller;
- #interrupt-cells = <2>;
- interrupt-controller;
- };
-
- gpio5: gpio@480b6000 {
- compatible = "ti,omap2-gpio";
- reg = <0x480b6000 0x200>;
- interrupts = <33>;
- ti,hwmods = "gpio5";
- #gpio-cells = <2>;
- gpio-controller;
- #interrupt-cells = <2>;
- interrupt-controller;
- };
-
- gpmc: gpmc@6e000000 {
- compatible = "ti,omap2430-gpmc";
- reg = <0x6e000000 0x1000>;
- #address-cells = <2>;
- #size-cells = <1>;
- interrupts = <20>;
- gpmc,num-cs = <8>;
- gpmc,num-waitpins = <4>;
- ti,hwmods = "gpmc";
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- mcbsp1: mcbsp@48074000 {
- compatible = "ti,omap2430-mcbsp";
- reg = <0x48074000 0xff>;
- reg-names = "mpu";
- interrupts = <64>, /* OCP compliant interrupt */
- <59>, /* TX interrupt */
- <60>, /* RX interrupt */
- <61>; /* RX overflow interrupt */
- interrupt-names = "common", "tx", "rx", "rx_overflow";
- ti,buffer-size = <128>;
- ti,hwmods = "mcbsp1";
- dmas = <&sdma 31>,
- <&sdma 32>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- mcbsp2: mcbsp@48076000 {
- compatible = "ti,omap2430-mcbsp";
- reg = <0x48076000 0xff>;
- reg-names = "mpu";
- interrupts = <16>, /* OCP compliant interrupt */
- <62>, /* TX interrupt */
- <63>; /* RX interrupt */
- interrupt-names = "common", "tx", "rx";
- ti,buffer-size = <128>;
- ti,hwmods = "mcbsp2";
- dmas = <&sdma 33>,
- <&sdma 34>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- mcbsp3: mcbsp@4808c000 {
- compatible = "ti,omap2430-mcbsp";
- reg = <0x4808c000 0xff>;
- reg-names = "mpu";
- interrupts = <17>, /* OCP compliant interrupt */
- <89>, /* TX interrupt */
- <90>; /* RX interrupt */
- interrupt-names = "common", "tx", "rx";
- ti,buffer-size = <128>;
- ti,hwmods = "mcbsp3";
- dmas = <&sdma 17>,
- <&sdma 18>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- mcbsp4: mcbsp@4808e000 {
- compatible = "ti,omap2430-mcbsp";
- reg = <0x4808e000 0xff>;
- reg-names = "mpu";
- interrupts = <18>, /* OCP compliant interrupt */
- <54>, /* TX interrupt */
- <55>; /* RX interrupt */
- interrupt-names = "common", "tx", "rx";
- ti,buffer-size = <128>;
- ti,hwmods = "mcbsp4";
- dmas = <&sdma 19>,
- <&sdma 20>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- mcbsp5: mcbsp@48096000 {
- compatible = "ti,omap2430-mcbsp";
- reg = <0x48096000 0xff>;
- reg-names = "mpu";
- interrupts = <19>, /* OCP compliant interrupt */
- <81>, /* TX interrupt */
- <82>; /* RX interrupt */
- interrupt-names = "common", "tx", "rx";
- ti,buffer-size = <128>;
- ti,hwmods = "mcbsp5";
- dmas = <&sdma 21>,
- <&sdma 22>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- mmc1: mmc@4809c000 {
- compatible = "ti,omap2-hsmmc";
- reg = <0x4809c000 0x200>;
- interrupts = <83>;
- ti,hwmods = "mmc1";
- ti,dual-volt;
- dmas = <&sdma 61>, <&sdma 62>;
- dma-names = "tx", "rx";
- pbias-supply = <&pbias_mmc_reg>;
- };
-
- mmc2: mmc@480b4000 {
- compatible = "ti,omap2-hsmmc";
- reg = <0x480b4000 0x200>;
- interrupts = <86>;
- ti,hwmods = "mmc2";
- dmas = <&sdma 47>, <&sdma 48>;
- dma-names = "tx", "rx";
- };
-
- mailbox: mailbox@48094000 {
- compatible = "ti,omap2-mailbox";
- reg = <0x48094000 0x200>;
- interrupts = <26>;
- ti,hwmods = "mailbox";
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <6>;
- mbox_dsp: mbox-dsp {
- ti,mbox-tx = <0 0 0>;
- ti,mbox-rx = <1 0 0>;
- };
- };
-
- timer1_target: target-module@49018000 {
- compatible = "ti,sysc-omap2-timer", "ti,sysc";
- reg = <0x49018000 0x4>,
- <0x49018010 0x4>,
- <0x49018014 0x4>;
- reg-names = "rev", "sysc", "syss";
- ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
- SYSC_OMAP2_EMUFREE |
- SYSC_OMAP2_ENAWAKEUP |
- SYSC_OMAP2_SOFTRESET |
- SYSC_OMAP2_AUTOIDLE)>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>;
- ti,syss-mask = <1>;
- clocks = <&gpt1_fck>, <&gpt1_ick>;
- clock-names = "fck", "ick";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x49018000 0x1000>;
-
- timer1: timer@0 {
- compatible = "ti,omap2420-timer";
- reg = <0 0x400>;
- interrupts = <37>;
- ti,timer-alwon;
- };
- };
-
- mcspi3: spi@480b8000 {
- compatible = "ti,omap2-mcspi";
- ti,hwmods = "mcspi3";
- reg = <0x480b8000 0x100>;
- interrupts = <91>;
- dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>;
- dma-names = "tx0", "rx0", "tx1", "rx1";
- };
-
- usb_otg_hs: usb_otg_hs@480ac000 {
- compatible = "ti,omap2-musb";
- ti,hwmods = "usb_otg_hs";
- reg = <0x480ac000 0x1000>;
- interrupts = <93>;
- };
-
- wd_timer2: watchdog@49016000 {
- compatible = "ti,omap2-wdt";
- ti,hwmods = "wd_timer2";
- reg = <0x49016000 0x80>;
- };
- };
-};
-
-&sdma {
- compatible = "ti,omap2430-sdma", "ti,omap-sdma";
-};
-
-&i2c1 {
- compatible = "ti,omap2430-i2c";
-};
-
-&i2c2 {
- compatible = "ti,omap2430-i2c";
-};
-
-#include "omap24xx-clocks.dtsi"
-#include "omap2430-clocks.dtsi"
-
-/* Preferred always-on timer for clockevent */
-&timer1_target {
- ti,no-reset-on-init;
- ti,no-idle;
- timer@0 {
- assigned-clocks = <&gpt1_fck>;
- assigned-clock-parents = <&func_32k_ck>;
- };
-};
diff --git a/arch/arm/boot/dts/ti/omap/omap24xx-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap24xx-clocks.dtsi
deleted file mode 100644
index 07af87edf0e2..000000000000
--- a/arch/arm/boot/dts/ti/omap/omap24xx-clocks.dtsi
+++ /dev/null
@@ -1,1241 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP24xx clock data
- *
- * Copyright (C) 2014 Texas Instruments, Inc.
- */
-&scm_clocks {
- mcbsp1_mux_fck: mcbsp1_mux_fck@4 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&func_96m_ck>, <&mcbsp_clks>;
- ti,bit-shift = <2>;
- reg = <0x4>;
- };
-
- mcbsp1_fck: mcbsp1_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
- };
-
- mcbsp2_mux_fck: mcbsp2_mux_fck@4 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&func_96m_ck>, <&mcbsp_clks>;
- ti,bit-shift = <6>;
- reg = <0x4>;
- };
-
- mcbsp2_fck: mcbsp2_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
- };
-};
-
-&prcm_clocks {
- func_32k_ck: func_32k_ck {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- };
-
- secure_32k_ck: secure_32k_ck {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- };
-
- virt_12m_ck: virt_12m_ck {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <12000000>;
- };
-
- virt_13m_ck: virt_13m_ck {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <13000000>;
- };
-
- virt_19200000_ck: virt_19200000_ck {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <19200000>;
- };
-
- virt_26m_ck: virt_26m_ck {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <26000000>;
- };
-
- aplls_clkin_ck: aplls_clkin_ck@540 {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clocks = <&virt_19200000_ck>, <&virt_26m_ck>, <&virt_13m_ck>, <&virt_12m_ck>;
- ti,bit-shift = <23>;
- reg = <0x0540>;
- };
-
- aplls_clkin_x2_ck: aplls_clkin_x2_ck {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&aplls_clkin_ck>;
- clock-mult = <2>;
- clock-div = <1>;
- };
-
- osc_ck: osc_ck@60 {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clocks = <&aplls_clkin_ck>, <&aplls_clkin_x2_ck>;
- ti,bit-shift = <6>;
- reg = <0x0060>;
- ti,index-starts-at-one;
- };
-
- sys_ck: sys_ck@60 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&osc_ck>;
- ti,bit-shift = <6>;
- ti,max-div = <3>;
- reg = <0x0060>;
- ti,index-starts-at-one;
- };
-
- alt_ck: alt_ck {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <54000000>;
- };
-
- mcbsp_clks: mcbsp_clks {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0x0>;
- };
-
- dpll_ck: dpll_ck@500 {
- #clock-cells = <0>;
- compatible = "ti,omap2-dpll-core-clock";
- clocks = <&sys_ck>, <&sys_ck>;
- reg = <0x0500>, <0x0540>;
- };
-
- apll96_ck: apll96_ck@500 {
- #clock-cells = <0>;
- compatible = "ti,omap2-apll-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <2>;
- ti,idlest-shift = <8>;
- ti,clock-frequency = <96000000>;
- reg = <0x0500>, <0x0530>, <0x0520>;
- };
-
- apll54_ck: apll54_ck@500 {
- #clock-cells = <0>;
- compatible = "ti,omap2-apll-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <6>;
- ti,idlest-shift = <9>;
- ti,clock-frequency = <54000000>;
- reg = <0x0500>, <0x0530>, <0x0520>;
- };
-
- func_54m_ck: func_54m_ck@540 {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clocks = <&apll54_ck>, <&alt_ck>;
- ti,bit-shift = <5>;
- reg = <0x0540>;
- };
-
- core_ck: core_ck {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&dpll_ck>;
- clock-mult = <1>;
- clock-div = <1>;
- };
-
- func_96m_ck: func_96m_ck@540 {
- #clock-cells = <0>;
- };
-
- apll96_d2_ck: apll96_d2_ck {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&apll96_ck>;
- clock-mult = <1>;
- clock-div = <2>;
- };
-
- func_48m_ck: func_48m_ck@540 {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clocks = <&apll96_d2_ck>, <&alt_ck>;
- ti,bit-shift = <3>;
- reg = <0x0540>;
- };
-
- func_12m_ck: func_12m_ck {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&func_48m_ck>;
- clock-mult = <1>;
- clock-div = <4>;
- };
-
- sys_clkout_src_gate: sys_clkout_src_gate@70 {
- #clock-cells = <0>;
- compatible = "ti,composite-no-wait-gate-clock";
- clocks = <&core_ck>;
- ti,bit-shift = <7>;
- reg = <0x0070>;
- };
-
- sys_clkout_src_mux: sys_clkout_src_mux@70 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
- reg = <0x0070>;
- };
-
- sys_clkout_src: sys_clkout_src {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&sys_clkout_src_gate>, <&sys_clkout_src_mux>;
- };
-
- sys_clkout: sys_clkout@70 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&sys_clkout_src>;
- ti,bit-shift = <3>;
- ti,max-div = <64>;
- reg = <0x0070>;
- ti,index-power-of-two;
- };
-
- emul_ck: emul_ck@78 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&func_54m_ck>;
- ti,bit-shift = <0>;
- reg = <0x0078>;
- };
-
- mpu_ck: mpu_ck@140 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&core_ck>;
- ti,max-div = <31>;
- reg = <0x0140>;
- ti,index-starts-at-one;
- };
-
- dsp_gate_fck: dsp_gate_fck@800 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&core_ck>;
- ti,bit-shift = <0>;
- reg = <0x0800>;
- };
-
- dsp_div_fck: dsp_div_fck@840 {
- #clock-cells = <0>;
- compatible = "ti,composite-divider-clock";
- clocks = <&core_ck>;
- reg = <0x0840>;
- };
-
- dsp_fck: dsp_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&dsp_gate_fck>, <&dsp_div_fck>;
- };
-
- core_l3_ck: core_l3_ck@240 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&core_ck>;
- ti,max-div = <31>;
- reg = <0x0240>;
- ti,index-starts-at-one;
- };
-
- gfx_3d_gate_fck: gfx_3d_gate_fck@300 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&core_l3_ck>;
- ti,bit-shift = <2>;
- reg = <0x0300>;
- };
-
- gfx_3d_div_fck: gfx_3d_div_fck@340 {
- #clock-cells = <0>;
- compatible = "ti,composite-divider-clock";
- clocks = <&core_l3_ck>;
- ti,max-div = <4>;
- reg = <0x0340>;
- ti,index-starts-at-one;
- };
-
- gfx_3d_fck: gfx_3d_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&gfx_3d_gate_fck>, <&gfx_3d_div_fck>;
- };
-
- gfx_2d_gate_fck: gfx_2d_gate_fck@300 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&core_l3_ck>;
- ti,bit-shift = <1>;
- reg = <0x0300>;
- };
-
- gfx_2d_div_fck: gfx_2d_div_fck@340 {
- #clock-cells = <0>;
- compatible = "ti,composite-divider-clock";
- clocks = <&core_l3_ck>;
- ti,max-div = <4>;
- reg = <0x0340>;
- ti,index-starts-at-one;
- };
-
- gfx_2d_fck: gfx_2d_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&gfx_2d_gate_fck>, <&gfx_2d_div_fck>;
- };
-
- gfx_ick: gfx_ick@310 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&core_l3_ck>;
- ti,bit-shift = <0>;
- reg = <0x0310>;
- };
-
- l4_ck: l4_ck@240 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&core_l3_ck>;
- ti,bit-shift = <5>;
- ti,max-div = <3>;
- reg = <0x0240>;
- ti,index-starts-at-one;
- };
-
- dss_ick: dss_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-no-wait-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <0>;
- reg = <0x0210>;
- };
-
- dss1_gate_fck: dss1_gate_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,composite-no-wait-gate-clock";
- clocks = <&core_ck>;
- ti,bit-shift = <0>;
- reg = <0x0200>;
- };
-
- core_d2_ck: core_d2_ck {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&core_ck>;
- clock-mult = <1>;
- clock-div = <2>;
- };
-
- core_d3_ck: core_d3_ck {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&core_ck>;
- clock-mult = <1>;
- clock-div = <3>;
- };
-
- core_d4_ck: core_d4_ck {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&core_ck>;
- clock-mult = <1>;
- clock-div = <4>;
- };
-
- core_d5_ck: core_d5_ck {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&core_ck>;
- clock-mult = <1>;
- clock-div = <5>;
- };
-
- core_d6_ck: core_d6_ck {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&core_ck>;
- clock-mult = <1>;
- clock-div = <6>;
- };
-
- dummy_ck: dummy_ck {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- };
-
- core_d8_ck: core_d8_ck {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&core_ck>;
- clock-mult = <1>;
- clock-div = <8>;
- };
-
- core_d9_ck: core_d9_ck {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&core_ck>;
- clock-mult = <1>;
- clock-div = <9>;
- };
-
- core_d12_ck: core_d12_ck {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&core_ck>;
- clock-mult = <1>;
- clock-div = <12>;
- };
-
- core_d16_ck: core_d16_ck {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&core_ck>;
- clock-mult = <1>;
- clock-div = <16>;
- };
-
- dss1_mux_fck: dss1_mux_fck@240 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&sys_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&core_d5_ck>, <&core_d6_ck>, <&core_d8_ck>, <&core_d9_ck>, <&core_d12_ck>, <&core_d16_ck>;
- ti,bit-shift = <8>;
- reg = <0x0240>;
- };
-
- dss1_fck: dss1_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&dss1_gate_fck>, <&dss1_mux_fck>;
- };
-
- dss2_gate_fck: dss2_gate_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,composite-no-wait-gate-clock";
- clocks = <&func_48m_ck>;
- ti,bit-shift = <1>;
- reg = <0x0200>;
- };
-
- dss2_mux_fck: dss2_mux_fck@240 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&sys_ck>, <&func_48m_ck>;
- ti,bit-shift = <13>;
- reg = <0x0240>;
- };
-
- dss2_fck: dss2_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&dss2_gate_fck>, <&dss2_mux_fck>;
- };
-
- dss_54m_fck: dss_54m_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_54m_ck>;
- ti,bit-shift = <2>;
- reg = <0x0200>;
- };
-
- ssi_ssr_sst_gate_fck: ssi_ssr_sst_gate_fck@204 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&core_ck>;
- ti,bit-shift = <1>;
- reg = <0x0204>;
- };
-
- ssi_ssr_sst_div_fck: ssi_ssr_sst_div_fck@240 {
- #clock-cells = <0>;
- compatible = "ti,composite-divider-clock";
- clocks = <&core_ck>;
- ti,bit-shift = <20>;
- reg = <0x0240>;
- };
-
- ssi_ssr_sst_fck: ssi_ssr_sst_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&ssi_ssr_sst_gate_fck>, <&ssi_ssr_sst_div_fck>;
- };
-
- usb_l4_gate_ick: usb_l4_gate_ick@214 {
- #clock-cells = <0>;
- compatible = "ti,composite-interface-clock";
- clocks = <&core_l3_ck>;
- ti,bit-shift = <0>;
- reg = <0x0214>;
- };
-
- usb_l4_div_ick: usb_l4_div_ick@240 {
- #clock-cells = <0>;
- compatible = "ti,composite-divider-clock";
- clocks = <&core_l3_ck>;
- ti,bit-shift = <25>;
- reg = <0x0240>;
- ti,dividers = <0>, <1>, <2>, <0>, <4>;
- };
-
- usb_l4_ick: usb_l4_ick {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
- };
-
- ssi_l4_ick: ssi_l4_ick@214 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <1>;
- reg = <0x0214>;
- };
-
- gpt1_ick: gpt1_ick@410 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <0>;
- reg = <0x0410>;
- };
-
- gpt1_gate_fck: gpt1_gate_fck@400 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&func_32k_ck>;
- ti,bit-shift = <0>;
- reg = <0x0400>;
- };
-
- gpt1_mux_fck: gpt1_mux_fck@440 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
- reg = <0x0440>;
- };
-
- gpt1_fck: gpt1_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
- };
-
- gpt2_ick: gpt2_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <4>;
- reg = <0x0210>;
- };
-
- gpt2_gate_fck: gpt2_gate_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&func_32k_ck>;
- ti,bit-shift = <4>;
- reg = <0x0200>;
- };
-
- gpt2_mux_fck: gpt2_mux_fck@244 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
- ti,bit-shift = <2>;
- reg = <0x0244>;
- };
-
- gpt2_fck: gpt2_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
- };
-
- gpt3_ick: gpt3_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <5>;
- reg = <0x0210>;
- };
-
- gpt3_gate_fck: gpt3_gate_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&func_32k_ck>;
- ti,bit-shift = <5>;
- reg = <0x0200>;
- };
-
- gpt3_mux_fck: gpt3_mux_fck@244 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
- ti,bit-shift = <4>;
- reg = <0x0244>;
- };
-
- gpt3_fck: gpt3_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
- };
-
- gpt4_ick: gpt4_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <6>;
- reg = <0x0210>;
- };
-
- gpt4_gate_fck: gpt4_gate_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&func_32k_ck>;
- ti,bit-shift = <6>;
- reg = <0x0200>;
- };
-
- gpt4_mux_fck: gpt4_mux_fck@244 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
- ti,bit-shift = <6>;
- reg = <0x0244>;
- };
-
- gpt4_fck: gpt4_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
- };
-
- gpt5_ick: gpt5_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <7>;
- reg = <0x0210>;
- };
-
- gpt5_gate_fck: gpt5_gate_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&func_32k_ck>;
- ti,bit-shift = <7>;
- reg = <0x0200>;
- };
-
- gpt5_mux_fck: gpt5_mux_fck@244 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
- ti,bit-shift = <8>;
- reg = <0x0244>;
- };
-
- gpt5_fck: gpt5_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
- };
-
- gpt6_ick: gpt6_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <8>;
- reg = <0x0210>;
- };
-
- gpt6_gate_fck: gpt6_gate_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&func_32k_ck>;
- ti,bit-shift = <8>;
- reg = <0x0200>;
- };
-
- gpt6_mux_fck: gpt6_mux_fck@244 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
- ti,bit-shift = <10>;
- reg = <0x0244>;
- };
-
- gpt6_fck: gpt6_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
- };
-
- gpt7_ick: gpt7_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <9>;
- reg = <0x0210>;
- };
-
- gpt7_gate_fck: gpt7_gate_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&func_32k_ck>;
- ti,bit-shift = <9>;
- reg = <0x0200>;
- };
-
- gpt7_mux_fck: gpt7_mux_fck@244 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
- ti,bit-shift = <12>;
- reg = <0x0244>;
- };
-
- gpt7_fck: gpt7_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
- };
-
- gpt8_ick: gpt8_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <10>;
- reg = <0x0210>;
- };
-
- gpt8_gate_fck: gpt8_gate_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&func_32k_ck>;
- ti,bit-shift = <10>;
- reg = <0x0200>;
- };
-
- gpt8_mux_fck: gpt8_mux_fck@244 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
- ti,bit-shift = <14>;
- reg = <0x0244>;
- };
-
- gpt8_fck: gpt8_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
- };
-
- gpt9_ick: gpt9_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <11>;
- reg = <0x0210>;
- };
-
- gpt9_gate_fck: gpt9_gate_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&func_32k_ck>;
- ti,bit-shift = <11>;
- reg = <0x0200>;
- };
-
- gpt9_mux_fck: gpt9_mux_fck@244 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
- ti,bit-shift = <16>;
- reg = <0x0244>;
- };
-
- gpt9_fck: gpt9_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
- };
-
- gpt10_ick: gpt10_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <12>;
- reg = <0x0210>;
- };
-
- gpt10_gate_fck: gpt10_gate_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&func_32k_ck>;
- ti,bit-shift = <12>;
- reg = <0x0200>;
- };
-
- gpt10_mux_fck: gpt10_mux_fck@244 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
- ti,bit-shift = <18>;
- reg = <0x0244>;
- };
-
- gpt10_fck: gpt10_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
- };
-
- gpt11_ick: gpt11_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <13>;
- reg = <0x0210>;
- };
-
- gpt11_gate_fck: gpt11_gate_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&func_32k_ck>;
- ti,bit-shift = <13>;
- reg = <0x0200>;
- };
-
- gpt11_mux_fck: gpt11_mux_fck@244 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
- ti,bit-shift = <20>;
- reg = <0x0244>;
- };
-
- gpt11_fck: gpt11_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
- };
-
- gpt12_ick: gpt12_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <14>;
- reg = <0x0210>;
- };
-
- gpt12_gate_fck: gpt12_gate_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&func_32k_ck>;
- ti,bit-shift = <14>;
- reg = <0x0200>;
- };
-
- gpt12_mux_fck: gpt12_mux_fck@244 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
- ti,bit-shift = <22>;
- reg = <0x0244>;
- };
-
- gpt12_fck: gpt12_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-clock";
- clocks = <&gpt12_gate_fck>, <&gpt12_mux_fck>;
- };
-
- mcbsp1_ick: mcbsp1_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <15>;
- reg = <0x0210>;
- };
-
- mcbsp1_gate_fck: mcbsp1_gate_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&mcbsp_clks>;
- ti,bit-shift = <15>;
- reg = <0x0200>;
- };
-
- mcbsp2_ick: mcbsp2_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <16>;
- reg = <0x0210>;
- };
-
- mcbsp2_gate_fck: mcbsp2_gate_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&mcbsp_clks>;
- ti,bit-shift = <16>;
- reg = <0x0200>;
- };
-
- mcspi1_ick: mcspi1_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <17>;
- reg = <0x0210>;
- };
-
- mcspi1_fck: mcspi1_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_48m_ck>;
- ti,bit-shift = <17>;
- reg = <0x0200>;
- };
-
- mcspi2_ick: mcspi2_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <18>;
- reg = <0x0210>;
- };
-
- mcspi2_fck: mcspi2_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_48m_ck>;
- ti,bit-shift = <18>;
- reg = <0x0200>;
- };
-
- uart1_ick: uart1_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <21>;
- reg = <0x0210>;
- };
-
- uart1_fck: uart1_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_48m_ck>;
- ti,bit-shift = <21>;
- reg = <0x0200>;
- };
-
- uart2_ick: uart2_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <22>;
- reg = <0x0210>;
- };
-
- uart2_fck: uart2_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_48m_ck>;
- ti,bit-shift = <22>;
- reg = <0x0200>;
- };
-
- uart3_ick: uart3_ick@214 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <2>;
- reg = <0x0214>;
- };
-
- uart3_fck: uart3_fck@204 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_48m_ck>;
- ti,bit-shift = <2>;
- reg = <0x0204>;
- };
-
- gpios_ick: gpios_ick@410 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <2>;
- reg = <0x0410>;
- };
-
- gpios_fck: gpios_fck@400 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_32k_ck>;
- ti,bit-shift = <2>;
- reg = <0x0400>;
- };
-
- mpu_wdt_ick: mpu_wdt_ick@410 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <3>;
- reg = <0x0410>;
- };
-
- mpu_wdt_fck: mpu_wdt_fck@400 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_32k_ck>;
- ti,bit-shift = <3>;
- reg = <0x0400>;
- };
-
- sync_32k_ick: sync_32k_ick@410 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <1>;
- reg = <0x0410>;
- };
-
- wdt1_ick: wdt1_ick@410 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <4>;
- reg = <0x0410>;
- };
-
- omapctrl_ick: omapctrl_ick@410 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <5>;
- reg = <0x0410>;
- };
-
- cam_fck: cam_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&func_96m_ck>;
- ti,bit-shift = <31>;
- reg = <0x0200>;
- };
-
- cam_ick: cam_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-no-wait-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <31>;
- reg = <0x0210>;
- };
-
- mailboxes_ick: mailboxes_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <30>;
- reg = <0x0210>;
- };
-
- wdt4_ick: wdt4_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <29>;
- reg = <0x0210>;
- };
-
- wdt4_fck: wdt4_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_32k_ck>;
- ti,bit-shift = <29>;
- reg = <0x0200>;
- };
-
- mspro_ick: mspro_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <27>;
- reg = <0x0210>;
- };
-
- mspro_fck: mspro_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_96m_ck>;
- ti,bit-shift = <27>;
- reg = <0x0200>;
- };
-
- fac_ick: fac_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <25>;
- reg = <0x0210>;
- };
-
- fac_fck: fac_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_12m_ck>;
- ti,bit-shift = <25>;
- reg = <0x0200>;
- };
-
- hdq_ick: hdq_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <23>;
- reg = <0x0210>;
- };
-
- hdq_fck: hdq_fck@200 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_12m_ck>;
- ti,bit-shift = <23>;
- reg = <0x0200>;
- };
-
- i2c1_ick: i2c1_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <19>;
- reg = <0x0210>;
- };
-
- i2c2_ick: i2c2_ick@210 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <20>;
- reg = <0x0210>;
- };
-
- gpmc_fck: gpmc_fck@238 {
- #clock-cells = <0>;
- compatible = "ti,fixed-factor-clock";
- clocks = <&core_l3_ck>;
- ti,clock-div = <1>;
- ti,autoidle-shift = <1>;
- reg = <0x0238>;
- ti,clock-mult = <1>;
- };
-
- sdma_fck: sdma_fck {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&core_l3_ck>;
- clock-mult = <1>;
- clock-div = <1>;
- };
-
- sdma_ick: sdma_ick@238 {
- #clock-cells = <0>;
- compatible = "ti,fixed-factor-clock";
- clocks = <&core_l3_ck>;
- ti,clock-div = <1>;
- ti,autoidle-shift = <0>;
- reg = <0x0238>;
- ti,clock-mult = <1>;
- };
-
- sdrc_ick: sdrc_ick@238 {
- #clock-cells = <0>;
- compatible = "ti,fixed-factor-clock";
- clocks = <&core_l3_ck>;
- ti,clock-div = <1>;
- ti,autoidle-shift = <2>;
- reg = <0x0238>;
- ti,clock-mult = <1>;
- };
-
- des_ick: des_ick@21c {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <0>;
- reg = <0x021c>;
- };
-
- sha_ick: sha_ick@21c {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <1>;
- reg = <0x021c>;
- };
-
- rng_ick: rng_ick@21c {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <2>;
- reg = <0x021c>;
- };
-
- aes_ick: aes_ick@21c {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <3>;
- reg = <0x021c>;
- };
-
- pka_ick: pka_ick@21c {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l4_ck>;
- ti,bit-shift = <4>;
- reg = <0x021c>;
- };
-
- usb_fck: usb_fck@204 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&func_48m_ck>;
- ti,bit-shift = <0>;
- reg = <0x0204>;
- };
-};
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index f827f89567fd..2e9597f50c58 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -22,9 +22,7 @@ CONFIG_NAMESPACES=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
CONFIG_PROFILING=y
-CONFIG_ARCH_MULTI_V6=y
CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_ARCH_OMAP2=y
CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
CONFIG_SOC_OMAP5=y
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 79f8afe3a6bf..37ecbfc0a19f 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -5,15 +5,6 @@ menu "TI OMAP/AM/DM/DRA Family"
config OMAP_HWMOD
bool
-config ARCH_OMAP2
- bool "TI OMAP2"
- depends on ARCH_MULTI_V6
- depends on !SMP
- select ARCH_OMAP2PLUS
- select CPU_ARM1136R0
- select OMAP_HWMOD
- select SOC_HAS_OMAP2_SDRC
-
config ARCH_OMAP3
bool "TI OMAP3"
depends on ARCH_MULTI_V7
@@ -118,7 +109,7 @@ config ARCH_OMAP2PLUS
select OMAP_IRQCHIP
select CLKSRC_TI_32K
help
- Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
+ Systems based on OMAP3, OMAP4 or OMAP5
config OMAP_INTERCONNECT_BARRIER
bool
@@ -129,7 +120,7 @@ config ARCH_OMAP
if ARCH_OMAP2PLUS
-menu "TI OMAP2/3/4 Specific Features"
+menu "TI OMAP3/4 Specific Features"
config ARCH_OMAP2PLUS_TYPICAL
bool "Typical OMAP configuration"
@@ -138,8 +129,7 @@ config ARCH_OMAP2PLUS_TYPICAL
select HIGHMEM
select I2C
select I2C_OMAP
- select MENELAUS if ARCH_OMAP2
- select NEON if CPU_V7
+ select NEON
select REGULATOR
select REGULATOR_FIXED_VOLTAGE
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
@@ -204,27 +194,7 @@ config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
PPA routine service ID for setting L2 auxiliary control register.
comment "OMAP Core Type"
- depends on ARCH_OMAP2
-
-config SOC_OMAP2420
- bool "OMAP2420 support (DEPRECATED)"
- depends on ARCH_OMAP2
- default y
- select OMAP_DM_SYSTIMER
- select OMAP_DM_TIMER
- select SOC_HAS_OMAP2_SDRC
- help
- This SoC is scheduled for removal in early 2027,
- since it uses the ARM1136r0 CPU revision.
-
-config SOC_OMAP2430
- bool "OMAP2430 support (DEPRECATED)"
- depends on ARCH_OMAP2
- default y
- select SOC_HAS_OMAP2_SDRC
- help
- This SoC is scheduled for removal in early 2027,
- since it uses the ARM1136r0 CPU revision.
+ depends on ARCH_OMAP3
config SOC_OMAP3430
bool "OMAP3430 support"
@@ -237,33 +207,9 @@ config SOC_TI81XX
depends on ARCH_OMAP3
default y
-comment "OMAP Legacy Platform Data Board Type"
- depends on ARCH_OMAP2PLUS
-
config MACH_OMAP_GENERIC
bool
-config MACH_OMAP2_TUSB6010
- bool
- depends on ARCH_OMAP2 && SOC_OMAP2420
- default y if MACH_NOKIA_N8X0
-
-config MACH_NOKIA_N810
- bool
-
-config MACH_NOKIA_N810_WIMAX
- bool
-
-config MACH_NOKIA_N8X0
- bool "Nokia N800/N810 (DEPRECATED)"
- depends on SOC_OMAP2420
- default y
- select MACH_NOKIA_N810
- select MACH_NOKIA_N810_WIMAX
- help
- This machine is scheduled for removal in early 2027,
- since it uses the ARM1136r0 CPU revision.
-
endmenu
endif
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index daf21127c82f..6c741442dc0d 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -5,23 +5,17 @@
# Common support
obj-y := id.o io.o control.o devices.o fb.o pm.o \
- common.o dma.o omap-headsmp.o sram.o
+ common.o dma.o omap-headsmp.o
-hwmod-common = omap_hwmod.o \
+# OMAP3 hwmod specific
+obj-$(CONFIG_ARCH_OMAP3) += sram.o omap_hwmod.o \
omap_hwmod_common_data.o \
omap_hwmod_common_ipblock_data.o \
omap_device.o display.o hdq1w.o \
i2c.o wd_timer.o
-clock-common = clock.o
-secure-common = omap-smc.o omap-secure.o
-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
-obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
-obj-$(CONFIG_ARCH_OMAP4) += $(secure-common)
-obj-$(CONFIG_SOC_AM33XX) += $(secure-common)
-obj-$(CONFIG_SOC_OMAP5) += $(secure-common)
-obj-$(CONFIG_SOC_AM43XX) += $(secure-common)
-obj-$(CONFIG_SOC_DRA7XX) += $(secure-common)
+# secure world
+obj-y += omap-smc.o omap-secure.o
ifneq ($(CONFIG_SND_SOC_OMAP_MCBSP),)
obj-$(CONFIG_OMAP_HWMOD) += mcbsp.o
@@ -49,13 +43,7 @@ omap5-dra7-common-$(CONFIG_SOC_HAS_REALTIME_COUNTER) = timer.o
obj-$(CONFIG_SOC_OMAP5) += $(omap5-dra7-common-y)
obj-$(CONFIG_SOC_DRA7XX) += $(omap5-dra7-common-y)
-# Functions loaded to SRAM
-obj-$(CONFIG_SOC_OMAP2420) += sram242x.o
-obj-$(CONFIG_SOC_OMAP2430) += sram243x.o
-
# Restart code (OMAP4/5 currently in omap4-common.c)
-obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o
-obj-$(CONFIG_SOC_OMAP2430) += omap2-restart.o
obj-$(CONFIG_SOC_TI81XX) += ti81xx-restart.o
obj-$(CONFIG_SOC_AM33XX) += am33xx-restart.o
obj-$(CONFIG_SOC_AM43XX) += omap4-restart.o
@@ -65,7 +53,6 @@ obj-$(CONFIG_SOC_OMAP5) += omap4-restart.o
obj-$(CONFIG_SOC_DRA7XX) += omap4-restart.o
# SMS/SDRC
-obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
# OPP table initialization
@@ -80,7 +67,6 @@ obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-pm-common)
obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-pm-common)
ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
omap-4-5-pm-common += pm44xx.o
obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-pm-common)
@@ -105,7 +91,6 @@ endif
# PRCM
obj-y += prm_common.o cm_common.o
-obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o
obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
omap-prcm-4-5-common = cminst44xx.o prm44xx.o \
@@ -122,8 +107,6 @@ obj-$(CONFIG_SOC_AM43XX) += $(omap-prcm-4-5-common) \
# OMAP voltage domains
voltagedomain-common := voltage.o vc.o vp.o
-obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common)
-obj-$(CONFIG_ARCH_OMAP2) += voltagedomains2xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common)
@@ -136,9 +119,6 @@ obj-$(CONFIG_SOC_DRA7XX) += $(voltagedomain-common)
# OMAP powerdomain framework
powerdomain-common += powerdomain.o powerdomain-common.o
-obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common)
-obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_data.o
-obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP3) += powerdomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o
@@ -155,10 +135,6 @@ obj-$(CONFIG_SOC_DRA7XX) += powerdomains7xx_data.o
# PRCM clockdomain control
clockdomain-common += clockdomain.o
-obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common)
-obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o
-obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o
-obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP3) += clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o
@@ -176,47 +152,20 @@ obj-$(CONFIG_SOC_DRA7XX) += $(clockdomain-common)
obj-$(CONFIG_SOC_DRA7XX) += clockdomains7xx_data.o
# Clock framework
-obj-$(CONFIG_ARCH_OMAP2) += $(clock-common)
-obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
-obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
-obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
-obj-$(CONFIG_ARCH_OMAP3) += $(clock-common)
-obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
-obj-$(CONFIG_SOC_AM33XX) += $(clock-common)
-obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
-obj-$(CONFIG_SOC_DRA7XX) += $(clock-common)
-obj-$(CONFIG_SOC_AM43XX) += $(clock-common)
-
-# OMAP2 clock rate set data (old "OPP" data)
-obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
-obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
+obj-y += clock.o
# hwmod data
-obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o
-obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o
-obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o
-obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2420_data.o
-obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_ipblock_data.o
-obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_3xxx_ipblock_data.o
-obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_interconnect_data.o
-obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
obj-$(CONFIG_SOC_TI81XX) += omap_hwmod_81xx_data.o
-# OMAP2420 MSDI controller integration support ("MMC")
-obj-$(CONFIG_SOC_OMAP2420) += msdi.o
-
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o pdata-quirks.o
-obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
# Platform specific device init code
obj-y += omap_phy_internal.o
-obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
-
$(obj)/pm-asm-offsets.h: $(obj)/pm-asm-offsets.s FORCE
$(call filechk,offsets,__TI_PM_ASM_OFFSETS_H__)
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index bff673e932fe..972b8cf0547f 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -45,40 +45,6 @@ void tick_broadcast(const struct cpumask *mask)
}
#endif
-#ifdef CONFIG_SOC_OMAP2420
-static const char *const omap242x_boards_compat[] __initconst = {
- "ti,omap2420",
- NULL,
-};
-
-DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
- .reserve = omap_reserve,
- .map_io = omap242x_map_io,
- .init_early = omap2420_init_early,
- .init_machine = omap_generic_init,
- .init_time = omap_init_time_of,
- .dt_compat = omap242x_boards_compat,
- .restart = omap2xxx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-static const char *const omap243x_boards_compat[] __initconst = {
- "ti,omap2430",
- NULL,
-};
-
-DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
- .reserve = omap_reserve,
- .map_io = omap243x_map_io,
- .init_early = omap2430_init_early,
- .init_machine = omap_generic_init,
- .init_time = omap_init_time_of,
- .dt_compat = omap243x_boards_compat,
- .restart = omap2xxx_restart,
-MACHINE_END
-#endif
-
#ifdef CONFIG_ARCH_OMAP3
/* Some boards need board name for legacy userspace in /proc/cpuinfo */
static const char *const n900_boards_compat[] __initconst = {
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
deleted file mode 100644
index d9acd32c5457..000000000000
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ /dev/null
@@ -1,512 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap2/board-n8x0.c
- *
- * Copyright (C) 2005-2009 Nokia Corporation
- * Author: Juha Yrjola <juha.yrjola@nokia.com>
- *
- * Modified from mach-omap2/board-generic.c
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio/consumer.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/stddef.h>
-#include <linux/i2c.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/musb.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_data/mmc-omap.h>
-#include <linux/mfd/menelaus.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "common.h"
-#include "mmc.h"
-#include "usb-tusb6010.h"
-#include "soc.h"
-#include "common-board-devices.h"
-
-#define TUSB6010_ASYNC_CS 1
-#define TUSB6010_SYNC_CS 4
-#define TUSB6010_DMACHAN 0x3f
-
-#define NOKIA_N810_WIMAX (1 << 2)
-#define NOKIA_N810 (1 << 1)
-#define NOKIA_N800 (1 << 0)
-
-static u32 board_caps;
-
-#define board_is_n800() (board_caps & NOKIA_N800)
-#define board_is_n810() (board_caps & NOKIA_N810)
-#define board_is_n810_wimax() (board_caps & NOKIA_N810_WIMAX)
-
-static void board_check_revision(void)
-{
- if (of_machine_is_compatible("nokia,n800"))
- board_caps = NOKIA_N800;
- else if (of_machine_is_compatible("nokia,n810"))
- board_caps = NOKIA_N810;
- else if (of_machine_is_compatible("nokia,n810-wimax"))
- board_caps = NOKIA_N810_WIMAX;
-
- if (!board_caps)
- pr_err("Unknown board\n");
-}
-
-#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
-
-static struct musb_hdrc_config musb_config = {
- .multipoint = 1,
- .dyn_fifo = 1,
- .num_eps = 16,
- .ram_bits = 12,
-};
-
-static struct musb_hdrc_platform_data tusb_data = {
- .mode = MUSB_OTG,
- .min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */
- .power = 100, /* Max 100 mA VBUS for host mode */
- .config = &musb_config,
-};
-
-static struct gpiod_lookup_table tusb_gpio_table = {
- .dev_id = "musb-tusb",
- .table = {
- GPIO_LOOKUP("gpio-0-31", 0, "enable", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("gpio-32-63", 26, "int", GPIO_ACTIVE_HIGH),
- { }
- },
-};
-
-static void __init n8x0_usb_init(void)
-{
- int ret = 0;
-
- gpiod_add_lookup_table(&tusb_gpio_table);
- ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2,
- TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
- TUSB6010_DMACHAN);
- if (ret != 0)
- return;
-
- pr_info("TUSB 6010\n");
-
- return;
-}
-#else
-
-static void __init n8x0_usb_init(void) {}
-
-#endif /*CONFIG_USB_MUSB_TUSB6010 */
-
-#if defined(CONFIG_MENELAUS) && IS_ENABLED(CONFIG_MMC_OMAP)
-
-/*
- * On both N800 and N810, only the first of the two MMC controllers is in use.
- * The two MMC slots are multiplexed via Menelaus companion chip over I2C.
- * On N800, both slots are powered via Menelaus. On N810, only one of the
- * slots is powered via Menelaus. The N810 EMMC is powered via GPIO.
- *
- * VMMC slot 1 on both N800 and N810
- * VDCDC3_APE and VMCS2_APE slot 2 on N800
- * GPIO23 and GPIO9 slot 2 EMMC on N810
- *
- */
-static int slot1_cover_open;
-static int slot2_cover_open;
-static struct device *mmc_device;
-
-static struct gpiod_lookup_table nokia800_mmc_gpio_table = {
- .dev_id = "mmci-omap.0",
- .table = {
- /* Slot switch, GPIO 96 */
- GPIO_LOOKUP("gpio-96-127", 0, "switch", GPIO_ACTIVE_HIGH),
- { }
- },
-};
-
-static struct gpiod_lookup_table nokia810_mmc_gpio_table = {
- .dev_id = "mmci-omap.0",
- .table = {
- /* Slot switch, GPIO 96 */
- GPIO_LOOKUP("gpio-96-127", 0, "switch", GPIO_ACTIVE_HIGH),
- /* Slot index 1, VSD power, GPIO 23 */
- GPIO_LOOKUP_IDX("gpio-0-31", 23, "vsd", 1, GPIO_ACTIVE_HIGH),
- /* Slot index 1, VIO power, GPIO 9 */
- GPIO_LOOKUP_IDX("gpio-0-31", 9, "vio", 1, GPIO_ACTIVE_HIGH),
- { }
- },
-};
-
-static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
- int power_on, int vdd)
-{
- int mV;
-
-#ifdef CONFIG_MMC_DEBUG
- dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
- str_on_off(power_on), vdd);
-#endif
- if (slot == 0) {
- if (!power_on)
- return menelaus_set_vmmc(0);
- switch (1 << vdd) {
- case MMC_VDD_33_34:
- case MMC_VDD_32_33:
- case MMC_VDD_31_32:
- mV = 3100;
- break;
- case MMC_VDD_30_31:
- mV = 3000;
- break;
- case MMC_VDD_28_29:
- mV = 2800;
- break;
- case MMC_VDD_165_195:
- mV = 1850;
- break;
- default:
- BUG();
- }
- return menelaus_set_vmmc(mV);
- } else {
- if (!power_on)
- return menelaus_set_vdcdc(3, 0);
- switch (1 << vdd) {
- case MMC_VDD_33_34:
- case MMC_VDD_32_33:
- mV = 3300;
- break;
- case MMC_VDD_30_31:
- case MMC_VDD_29_30:
- mV = 3000;
- break;
- case MMC_VDD_28_29:
- case MMC_VDD_27_28:
- mV = 2800;
- break;
- case MMC_VDD_24_25:
- case MMC_VDD_23_24:
- mV = 2400;
- break;
- case MMC_VDD_22_23:
- case MMC_VDD_21_22:
- mV = 2200;
- break;
- case MMC_VDD_20_21:
- mV = 2000;
- break;
- case MMC_VDD_165_195:
- mV = 1800;
- break;
- default:
- BUG();
- }
- return menelaus_set_vdcdc(3, mV);
- }
- return 0;
-}
-
-static int n8x0_mmc_set_power(struct device *dev, int slot, int power_on,
- int vdd)
-{
- if (board_is_n800() || slot == 0)
- return n8x0_mmc_set_power_menelaus(dev, slot, power_on, vdd);
-
- /* The n810 power will be handled by GPIO code in the driver */
-
- return 0;
-}
-
-static int n8x0_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
-{
- int r;
-
- dev_dbg(dev, "Set slot %d bus mode %s\n", slot + 1,
- bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
- BUG_ON(slot != 0 && slot != 1);
- slot++;
- switch (bus_mode) {
- case MMC_BUSMODE_OPENDRAIN:
- r = menelaus_set_mmc_opendrain(slot, 1);
- break;
- case MMC_BUSMODE_PUSHPULL:
- r = menelaus_set_mmc_opendrain(slot, 0);
- break;
- default:
- BUG();
- }
- if (r != 0 && printk_ratelimit())
- dev_err(dev, "MMC: unable to set bus mode for slot %d\n",
- slot);
- return r;
-}
-
-static int n8x0_mmc_get_cover_state(struct device *dev, int slot)
-{
- slot++;
- BUG_ON(slot != 1 && slot != 2);
- if (slot == 1)
- return slot1_cover_open;
- else
- return slot2_cover_open;
-}
-
-static void n8x0_mmc_callback(void *data, u8 card_mask)
-{
-#ifdef CONFIG_MMC_OMAP
- int bit, *openp, index;
-
- if (board_is_n800()) {
- bit = 1 << 1;
- openp = &slot2_cover_open;
- index = 1;
- } else {
- bit = 1;
- openp = &slot1_cover_open;
- index = 0;
- }
-
- if (card_mask & bit)
- *openp = 1;
- else
- *openp = 0;
-
- omap_mmc_notify_cover_event(mmc_device, index, *openp);
-#else
- pr_warn("MMC: notify cover event not available\n");
-#endif
-}
-
-static int n8x0_mmc_late_init(struct device *dev)
-{
- int r, bit, *openp;
- int vs2sel;
-
- mmc_device = dev;
-
- r = menelaus_set_slot_sel(1);
- if (r < 0)
- return r;
-
- if (board_is_n800())
- vs2sel = 0;
- else
- vs2sel = 2;
-
- r = menelaus_set_mmc_slot(2, 0, vs2sel, 1);
- if (r < 0)
- return r;
-
- n8x0_mmc_set_power(dev, 0, MMC_POWER_ON, 16); /* MMC_VDD_28_29 */
- n8x0_mmc_set_power(dev, 1, MMC_POWER_ON, 16);
-
- r = menelaus_set_mmc_slot(1, 1, 0, 1);
- if (r < 0)
- return r;
- r = menelaus_set_mmc_slot(2, 1, vs2sel, 1);
- if (r < 0)
- return r;
-
- r = menelaus_get_slot_pin_states();
- if (r < 0)
- return r;
-
- if (board_is_n800()) {
- bit = 1 << 1;
- openp = &slot2_cover_open;
- } else {
- bit = 1;
- openp = &slot1_cover_open;
- slot2_cover_open = 0;
- }
-
- /* All slot pin bits seem to be inversed until first switch change */
- if (r == 0xf || r == (0xf & ~bit))
- r = ~r;
-
- if (r & bit)
- *openp = 1;
- else
- *openp = 0;
-
- r = menelaus_register_mmc_callback(n8x0_mmc_callback, NULL);
-
- return r;
-}
-
-static void n8x0_mmc_shutdown(struct device *dev)
-{
- int vs2sel;
-
- if (board_is_n800())
- vs2sel = 0;
- else
- vs2sel = 2;
-
- menelaus_set_mmc_slot(1, 0, 0, 0);
- menelaus_set_mmc_slot(2, 0, vs2sel, 0);
-}
-
-static void n8x0_mmc_cleanup(struct device *dev)
-{
- menelaus_unregister_mmc_callback();
-}
-
-/*
- * MMC controller1 has two slots that are multiplexed via I2C.
- * MMC controller2 is not in use.
- */
-static struct omap_mmc_platform_data mmc1_data = {
- .nr_slots = 0,
- .init = n8x0_mmc_late_init,
- .cleanup = n8x0_mmc_cleanup,
- .shutdown = n8x0_mmc_shutdown,
- .max_freq = 24000000,
- .slots[0] = {
- .wires = 4,
- .set_power = n8x0_mmc_set_power,
- .set_bus_mode = n8x0_mmc_set_bus_mode,
- .get_cover_state = n8x0_mmc_get_cover_state,
- .ocr_mask = MMC_VDD_165_195 | MMC_VDD_30_31 |
- MMC_VDD_32_33 | MMC_VDD_33_34,
- .name = "internal",
- },
- .slots[1] = {
- .set_power = n8x0_mmc_set_power,
- .set_bus_mode = n8x0_mmc_set_bus_mode,
- .get_cover_state = n8x0_mmc_get_cover_state,
- .ocr_mask = MMC_VDD_165_195 | MMC_VDD_20_21 |
- MMC_VDD_21_22 | MMC_VDD_22_23 |
- MMC_VDD_23_24 | MMC_VDD_24_25 |
- MMC_VDD_27_28 | MMC_VDD_28_29 |
- MMC_VDD_29_30 | MMC_VDD_30_31 |
- MMC_VDD_32_33 | MMC_VDD_33_34,
- .name = "external",
- },
-};
-
-static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
-
-static void __init n8x0_mmc_init(void)
-{
- if (board_is_n810()) {
- mmc1_data.slots[0].name = "external";
-
- /*
- * Some Samsung Movinand chips do not like open-ended
- * multi-block reads and fall to braind-dead state
- * while doing so. Reducing the number of blocks in
- * the transfer or delays in clock disable do not help
- */
- mmc1_data.slots[1].name = "internal";
- mmc1_data.slots[1].ban_openended = 1;
- gpiod_add_lookup_table(&nokia810_mmc_gpio_table);
- } else {
- gpiod_add_lookup_table(&nokia800_mmc_gpio_table);
- }
-
- mmc1_data.nr_slots = 2;
- mmc_data[0] = &mmc1_data;
-}
-#else
-static struct omap_mmc_platform_data mmc1_data;
-static void __init n8x0_mmc_init(void)
-{
-}
-#endif /* CONFIG_MMC_OMAP */
-
-#ifdef CONFIG_MENELAUS
-
-static int n8x0_auto_sleep_regulators(void)
-{
- u32 val;
- int ret;
-
- val = EN_VPLL_SLEEP | EN_VMMC_SLEEP \
- | EN_VAUX_SLEEP | EN_VIO_SLEEP \
- | EN_VMEM_SLEEP | EN_DC3_SLEEP \
- | EN_VC_SLEEP | EN_DC2_SLEEP;
-
- ret = menelaus_set_regulator_sleep(1, val);
- if (ret < 0) {
- pr_err("Could not set regulators to sleep on menelaus: %u\n",
- ret);
- return ret;
- }
- return 0;
-}
-
-static int n8x0_auto_voltage_scale(void)
-{
- int ret;
-
- ret = menelaus_set_vcore_hw(1400, 1050);
- if (ret < 0) {
- pr_err("Could not set VCORE voltage on menelaus: %u\n", ret);
- return ret;
- }
- return 0;
-}
-
-static int n8x0_menelaus_late_init(struct device *dev)
-{
- int ret;
-
- ret = n8x0_auto_voltage_scale();
- if (ret < 0)
- return ret;
- ret = n8x0_auto_sleep_regulators();
- if (ret < 0)
- return ret;
- return 0;
-}
-
-#else
-static int n8x0_menelaus_late_init(struct device *dev)
-{
- return 0;
-}
-#endif
-
-struct menelaus_platform_data n8x0_menelaus_platform_data = {
- .late_init = n8x0_menelaus_late_init,
-};
-
-static struct gpiod_lookup_table nokia810_asoc_gpio_table = {
- .dev_id = "soc-audio",
- .table = {
- GPIO_LOOKUP("gpio-0-15", 10, "headset", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("gpio-80-111", 21, "speaker", GPIO_ACTIVE_HIGH),
- { }
- },
-};
-
-static int __init n8x0_late_initcall(void)
-{
- if (!board_caps)
- return -ENODEV;
-
- n8x0_mmc_init();
- n8x0_usb_init();
- gpiod_add_lookup_table(&nokia810_asoc_gpio_table);
-
- return 0;
-}
-omap_late_initcall(n8x0_late_initcall);
-
-/*
- * Legacy init pdata init for n8x0. Note that we want to follow the
- * I2C bus numbering starting at 0 for device tree like other omaps.
- */
-void * __init n8x0_legacy_init(void)
-{
- board_check_revision();
- return &mmc1_data;
-}
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpll.c b/arch/arm/mach-omap2/clkt2xxx_dpll.c
deleted file mode 100644
index 0edebf3355fa..000000000000
--- a/arch/arm/mach-omap2/clkt2xxx_dpll.c
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * OMAP2-specific DPLL control functions
- *
- * Copyright (C) 2011 Nokia Corporation
- * Paul Walmsley
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "cm2xxx.h"
-#include "cm-regbits-24xx.h"
-
-/* Private functions */
-
-/**
- * _allow_idle - enable DPLL autoidle bits
- * @clk: struct clk * of the DPLL to operate on
- *
- * Enable DPLL automatic idle control. The DPLL will enter low-power
- * stop when its downstream clocks are gated. No return value.
- * REVISIT: DPLL can optionally enter low-power bypass by writing 0x1
- * instead. Add some mechanism to optionally enter this mode.
- */
-static void _allow_idle(struct clk_hw_omap *clk)
-{
- if (!clk || !clk->dpll_data)
- return;
-
- omap2xxx_cm_set_dpll_auto_low_power_stop();
-}
-
-/**
- * _deny_idle - prevent DPLL from automatically idling
- * @clk: struct clk * of the DPLL to operate on
- *
- * Disable DPLL automatic idle control. No return value.
- */
-static void _deny_idle(struct clk_hw_omap *clk)
-{
- if (!clk || !clk->dpll_data)
- return;
-
- omap2xxx_cm_set_dpll_disable_autoidle();
-}
-
-
-/* Public data */
-const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll = {
- .allow_idle = _allow_idle,
- .deny_idle = _deny_idle,
-};
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
deleted file mode 100644
index 93f6d3cd9525..000000000000
--- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
+++ /dev/null
@@ -1,194 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * DPLL + CORE_CLK composite clock functions
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * XXX The DPLL and CORE clocks should be split into two separate clock
- * types.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/clk/ti.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock2xxx.h"
-#include "opp2xxx.h"
-#include "cm2xxx.h"
-#include "cm-regbits-24xx.h"
-#include "sdrc.h"
-#include "sram.h"
-
-/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
-
-/*
- * dpll_core_ck: pointer to the combined dpll_ck + core_ck on OMAP2xxx
- * (currently defined as "dpll_ck" in the OMAP2xxx clock tree). Set
- * during dpll_ck init and used later by omap2xxx_clk_get_core_rate().
- */
-static struct clk_hw_omap *dpll_core_ck;
-
-/**
- * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
- *
- * Returns the CORE_CLK rate. CORE_CLK can have one of three rate
- * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
- * (the latter is unusual). This currently should be called with
- * struct clk *dpll_ck, which is a composite clock of dpll_ck and
- * core_ck.
- */
-unsigned long omap2xxx_clk_get_core_rate(void)
-{
- long long core_clk;
- u32 v;
-
- WARN_ON(!dpll_core_ck);
-
- core_clk = omap2_get_dpll_rate(dpll_core_ck);
-
- v = omap2xxx_cm_get_core_clk_src();
-
- if (v == CORE_CLK_SRC_32K)
- core_clk = 32768;
- else
- core_clk *= v;
-
- return core_clk;
-}
-
-/*
- * Uses the current prcm set to tell if a rate is valid.
- * You can go slower, but not faster within a given rate set.
- */
-static long omap2_dpllcore_round_rate(unsigned long target_rate)
-{
- u32 high, low, core_clk_src;
-
- core_clk_src = omap2xxx_cm_get_core_clk_src();
-
- if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */
- high = curr_prcm_set->dpll_speed * 2;
- low = curr_prcm_set->dpll_speed;
- } else { /* DPLL clockout x 2 */
- high = curr_prcm_set->dpll_speed;
- low = curr_prcm_set->dpll_speed / 2;
- }
-
-#ifdef DOWN_VARIABLE_DPLL
- if (target_rate > high)
- return high;
- else
- return target_rate;
-#else
- if (target_rate > low)
- return high;
- else
- return low;
-#endif
-
-}
-
-unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- return omap2xxx_clk_get_core_rate();
-}
-
-int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 cur_rate, low, mult, div, valid_rate, done_rate;
- u32 bypass = 0;
- struct prcm_config tmpset;
- const struct dpll_data *dd;
-
- cur_rate = omap2xxx_clk_get_core_rate();
- mult = omap2xxx_cm_get_core_clk_src();
-
- if ((rate == (cur_rate / 2)) && (mult == 2)) {
- omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
- } else if ((rate == (cur_rate * 2)) && (mult == 1)) {
- omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
- } else if (rate != cur_rate) {
- valid_rate = omap2_dpllcore_round_rate(rate);
- if (valid_rate != rate)
- return -EINVAL;
-
- if (mult == 1)
- low = curr_prcm_set->dpll_speed;
- else
- low = curr_prcm_set->dpll_speed / 2;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- tmpset.cm_clksel1_pll =
- omap_clk_ll_ops.clk_readl(&dd->mult_div1_reg);
- tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
- dd->div1_mask);
- div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
- tmpset.cm_clksel2_pll = omap2xxx_cm_get_core_pll_config();
- tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
- if (rate > low) {
- tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
- mult = ((rate / 2) / 1000000);
- done_rate = CORE_CLK_SRC_DPLL_X2;
- } else {
- tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
- mult = (rate / 1000000);
- done_rate = CORE_CLK_SRC_DPLL;
- }
- tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
- tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
-
- /* Worst case */
- tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
-
- if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */
- bypass = 1;
-
- /* For omap2xxx_sdrc_init_params() */
- omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-
- /* Force dll lock mode */
- omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
- bypass);
-
- /* Errata: ret dll entry state */
- omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
- omap2xxx_sdrc_reprogram(done_rate, 0);
- }
-
- return 0;
-}
-
-/**
- * omap2xxx_clkt_dpllcore_init - clk init function for dpll_ck
- * @clk: struct clk *dpll_ck
- *
- * Store a local copy of @clk in dpll_core_ck so other code can query
- * the core rate without having to clk_get(), which can sleep. Must
- * only be called once. No return value. XXX If the clock
- * registration process is ever changed such that dpll_ck is no longer
- * statically defined, this code may need to change to increment some
- * kind of use count on dpll_ck.
- */
-void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw)
-{
- WARN(dpll_core_ck, "dpll_core_ck already set - should never happen");
- dpll_core_ck = to_clk_hw_omap(hw);
-}
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
deleted file mode 100644
index 2b04e422b46c..000000000000
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ /dev/null
@@ -1,259 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * OMAP2xxx DVFS virtual clock functions
- *
- * Copyright (C) 2005-2008, 2012 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * XXX Some of this code should be replaceable by the upcoming OPP layer
- * code. However, some notion of "rate set" is probably still necessary
- * for OMAP2xxx at least. Rate sets should be generalized so they can be
- * used for any OMAP chip, not just OMAP2xxx. In particular, Richard Woodruff
- * has in the past expressed a preference to use rate sets for OPP changes,
- * rather than dynamically recalculating the clock tree, so if someone wants
- * this badly enough to write the code to handle it, we should support it
- * as an option.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/cpufreq.h>
-#include <linux/slab.h>
-
-#include "soc.h"
-#include "clock.h"
-#include "clock2xxx.h"
-#include "opp2xxx.h"
-#include "cm2xxx.h"
-#include "cm-regbits-24xx.h"
-#include "sdrc.h"
-#include "sram.h"
-
-static u16 cpu_mask;
-
-const struct prcm_config *curr_prcm_set;
-const struct prcm_config *rate_table;
-
-/*
- * sys_ck_rate: the rate of the external high-frequency clock
- * oscillator on the board. Set by the SoC-specific clock init code.
- * Once set during a boot, will not change.
- */
-static unsigned long sys_ck_rate;
-
-/**
- * omap2_table_mpu_recalc - just return the MPU speed
- * @clk: virt_prcm_set struct clk
- *
- * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
- */
-static unsigned long omap2_table_mpu_recalc(struct clk_hw *clk,
- unsigned long parent_rate)
-{
- return curr_prcm_set->mpu_speed;
-}
-
-/*
- * Look for a rate equal or less than the target rate given a configuration set.
- *
- * What's not entirely clear is "which" field represents the key field.
- * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
- * just uses the ARM rates.
- */
-static int omap2_determine_rate_to_table(struct clk_hw *hw,
- struct clk_rate_request *req)
-{
- const struct prcm_config *ptr;
- long highest_rate;
-
- highest_rate = -EINVAL;
-
- for (ptr = rate_table; ptr->mpu_speed; ptr++) {
- if (!(ptr->flags & cpu_mask))
- continue;
- if (ptr->xtal_speed != sys_ck_rate)
- continue;
-
- highest_rate = ptr->mpu_speed;
-
- /* Can check only after xtal frequency check */
- if (ptr->mpu_speed <= req->rate)
- break;
- }
- req->rate = highest_rate;
-
- return 0;
-}
-
-/* Sets basic clocks based on the specified rate */
-static int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- u32 cur_rate, done_rate, bypass = 0;
- const struct prcm_config *prcm;
- unsigned long found_speed = 0;
- unsigned long flags;
-
- for (prcm = rate_table; prcm->mpu_speed; prcm++) {
- if (!(prcm->flags & cpu_mask))
- continue;
-
- if (prcm->xtal_speed != sys_ck_rate)
- continue;
-
- if (prcm->mpu_speed <= rate) {
- found_speed = prcm->mpu_speed;
- break;
- }
- }
-
- if (!found_speed) {
- printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
- rate / 1000000);
- return -EINVAL;
- }
-
- curr_prcm_set = prcm;
- cur_rate = omap2xxx_clk_get_core_rate();
-
- if (prcm->dpll_speed == cur_rate / 2) {
- omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
- } else if (prcm->dpll_speed == cur_rate * 2) {
- omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
- } else if (prcm->dpll_speed != cur_rate) {
- local_irq_save(flags);
-
- if (prcm->dpll_speed == prcm->xtal_speed)
- bypass = 1;
-
- if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
- CORE_CLK_SRC_DPLL_X2)
- done_rate = CORE_CLK_SRC_DPLL_X2;
- else
- done_rate = CORE_CLK_SRC_DPLL;
-
- omap2xxx_cm_set_mod_dividers(prcm->cm_clksel_mpu,
- prcm->cm_clksel_dsp,
- prcm->cm_clksel_gfx,
- prcm->cm_clksel1_core,
- prcm->cm_clksel_mdm);
-
- /* x2 to enter omap2xxx_sdrc_init_params() */
- omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-
- omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
- bypass);
-
- omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
- omap2xxx_sdrc_reprogram(done_rate, 0);
-
- local_irq_restore(flags);
- }
-
- return 0;
-}
-
-/**
- * omap2xxx_clkt_vps_check_bootloader_rates - determine which of the rate
- * table sets matches the current CORE DPLL hardware rate
- *
- * Check the MPU rate set by bootloader. Sets the 'curr_prcm_set'
- * global to point to the active rate set when found; otherwise, sets
- * it to NULL. No return value;
- */
-static void omap2xxx_clkt_vps_check_bootloader_rates(void)
-{
- const struct prcm_config *prcm = NULL;
- unsigned long rate;
-
- rate = omap2xxx_clk_get_core_rate();
- for (prcm = rate_table; prcm->mpu_speed; prcm++) {
- if (!(prcm->flags & cpu_mask))
- continue;
- if (prcm->xtal_speed != sys_ck_rate)
- continue;
- if (prcm->dpll_speed <= rate)
- break;
- }
- curr_prcm_set = prcm;
-}
-
-/**
- * omap2xxx_clkt_vps_late_init - store a copy of the sys_ck rate
- *
- * Store a copy of the sys_ck rate for later use by the OMAP2xxx DVFS
- * code. (The sys_ck rate does not -- or rather, must not -- change
- * during kernel runtime.) Must be called after we have a valid
- * sys_ck rate, but before the virt_prcm_set clock rate is
- * recalculated. No return value.
- */
-static void omap2xxx_clkt_vps_late_init(void)
-{
- struct clk *c;
-
- c = clk_get(NULL, "sys_ck");
- if (IS_ERR(c)) {
- WARN(1, "could not locate sys_ck\n");
- } else {
- sys_ck_rate = clk_get_rate(c);
- clk_put(c);
- }
-}
-
-#ifdef CONFIG_OF
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
-
-static const struct clk_ops virt_prcm_set_ops = {
- .recalc_rate = &omap2_table_mpu_recalc,
- .set_rate = &omap2_select_table_rate,
- .determine_rate = &omap2_determine_rate_to_table,
-};
-
-/**
- * omap2xxx_clkt_vps_init - initialize virt_prcm_set clock
- *
- * Does a manual init for the virtual prcm DVFS clock for OMAP2. This
- * function is called only from omap2 DT clock init, as the virtual
- * node is not modelled in the DT clock data.
- */
-void omap2xxx_clkt_vps_init(void)
-{
- struct clk_init_data init = { NULL };
- struct clk_hw_omap *hw = NULL;
- struct clk *clk;
- const char *parent_name = "mpu_ck";
-
- omap2xxx_clkt_vps_late_init();
- omap2xxx_clkt_vps_check_bootloader_rates();
-
- hw = kzalloc_obj(*hw);
- if (!hw)
- return;
- init.name = "virt_prcm_set";
- init.ops = &virt_prcm_set_ops;
- init.parent_names = &parent_name;
- init.num_parents = 1;
-
- hw->hw.init = &init;
-
- clk = clk_register(NULL, &hw->hw);
- if (IS_ERR(clk)) {
- printk(KERN_ERR "Failed to register clock\n");
- kfree(hw);
- return;
- }
-
- clkdev_create(clk, "cpufreq_ck", NULL);
-}
-#endif
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 83fae51722a9..b73a80503da8 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -30,9 +30,7 @@
#include "clockdomain.h"
#include "clock.h"
#include "cm.h"
-#include "cm2xxx.h"
#include "cm3xxx.h"
-#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
#include "common.h"
@@ -94,11 +92,7 @@ void __init ti_clk_init_features(void)
}
/* Bypass value setup for DPLLs */
- if (cpu_is_omap24xx()) {
- features.dpll_bypass_vals |=
- (1 << OMAP2XXX_EN_DPLL_LPBYPASS) |
- (1 << OMAP2XXX_EN_DPLL_FRBYPASS);
- } else if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx()) {
features.dpll_bypass_vals |=
(1 << OMAP3XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP3XXX_EN_DPLL_FRBYPASS);
@@ -122,9 +116,7 @@ void __init ti_clk_init_features(void)
* 34xx reverses this, just to keep us on our toes
* AM35xx uses both, depending on the module.
*/
- if (cpu_is_omap24xx())
- features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
- else if (cpu_is_omap34xx())
+ if (cpu_is_omap34xx())
features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
/* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */
diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h
deleted file mode 100644
index 73c011dadfd2..000000000000
--- a/arch/arm/mach-omap2/clock2xxx.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * OMAP2 clock function prototypes and macros
- *
- * Copyright (C) 2005-2010 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK2XXX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK2XXX_H
-
-#include <linux/clk-provider.h>
-#include "clock.h"
-
-unsigned long omap2xxx_clk_get_core_rate(void);
-
-#endif
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 69dc5b839335..4b5ae1f40d50 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -1213,7 +1213,7 @@ int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh)
{
/* The clkdm attribute does not exist yet prior OMAP4 */
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ if (cpu_is_omap34xx())
return 0;
/*
@@ -1244,7 +1244,7 @@ int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh)
int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh)
{
/* The clkdm attribute does not exist yet prior OMAP4 */
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ if (cpu_is_omap34xx())
return 0;
if (!oh)
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 86a2f9e5d0ef..2d422b5f121f 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -216,8 +216,6 @@ int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh);
void clkdm_save_context(void);
void clkdm_restore_context(void);
-extern void __init omap242x_clockdomains_init(void);
-extern void __init omap243x_clockdomains_init(void);
extern void __init omap3xxx_clockdomains_init(void);
extern void __init am33xx_clockdomains_init(void);
extern void __init ti814x_clockdomains_init(void);
@@ -230,14 +228,11 @@ void am43xx_clockdomains_init(void);
extern void clkdm_add_autodeps(struct clockdomain *clkdm);
extern void clkdm_del_autodeps(struct clockdomain *clkdm);
-extern struct clkdm_ops omap2_clkdm_operations;
extern struct clkdm_ops omap3_clkdm_operations;
extern struct clkdm_ops omap4_clkdm_operations;
extern struct clkdm_ops am33xx_clkdm_operations;
extern struct clkdm_ops am43xx_clkdm_operations;
-extern struct clkdm_dep gfx_24xx_wkdeps[];
-extern struct clkdm_dep dsp_24xx_wkdeps[];
extern struct clockdomain wkup_common_clkdm;
#endif
diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c
deleted file mode 100644
index ac4ffb5d2ffc..000000000000
--- a/arch/arm/mach-omap2/clockdomains2420_data.c
+++ /dev/null
@@ -1,154 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * OMAP2420 clockdomains
- *
- * Copyright (C) 2008-2011 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Paul Walmsley, Jouni Högander
- *
- * This file contains clockdomains and clockdomain wakeup dependencies
- * for OMAP2420 chips. Some notes:
- *
- * A useful validation rule for struct clockdomain: Any clockdomain
- * referenced by a wkdep_srcs must have a dep_bit assigned. So
- * wkdep_srcs are really just software-controllable dependencies.
- * Non-software-controllable dependencies do exist, but they are not
- * encoded below (yet).
- *
- * 24xx does not support programmable sleep dependencies (SLEEPDEP)
- *
- * The overly-specific dep_bit names are due to a bit name collision
- * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
- * value are the same for all powerdomains: 2
- *
- * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
- * sanity check?
- * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
- */
-
-/*
- * To-Do List
- * -> Port the Sleep/Wakeup dependencies for the domains
- * from the Power domain framework
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "clockdomain.h"
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
-#include "prm-regbits-24xx.h"
-
-/*
- * Clockdomain dependencies for wkdeps
- *
- * XXX Hardware dependencies (e.g., dependencies that cannot be
- * changed in software) are not included here yet, but should be.
- */
-
-/* Wakeup dependency source arrays */
-
-/* 2420-specific possible wakeup dependencies */
-
-/* 2420 PM_WKDEP_MPU: CORE, DSP, WKUP */
-static struct clkdm_dep mpu_2420_wkdeps[] = {
- { .clkdm_name = "core_l3_clkdm" },
- { .clkdm_name = "core_l4_clkdm" },
- { .clkdm_name = "dsp_clkdm" },
- { .clkdm_name = "wkup_clkdm" },
- { NULL },
-};
-
-/* 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP */
-static struct clkdm_dep core_2420_wkdeps[] = {
- { .clkdm_name = "dsp_clkdm" },
- { .clkdm_name = "gfx_clkdm" },
- { .clkdm_name = "mpu_clkdm" },
- { .clkdm_name = "wkup_clkdm" },
- { NULL },
-};
-
-/*
- * 2420-only clockdomains
- */
-
-static struct clockdomain mpu_2420_clkdm = {
- .name = "mpu_clkdm",
- .pwrdm = { .name = "mpu_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .wkdep_srcs = mpu_2420_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
-};
-
-static struct clockdomain iva1_2420_clkdm = {
- .name = "iva1_clkdm",
- .pwrdm = { .name = "dsp_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
- .wkdep_srcs = dsp_24xx_wkdeps,
- .clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
-};
-
-static struct clockdomain dsp_2420_clkdm = {
- .name = "dsp_clkdm",
- .pwrdm = { .name = "dsp_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
-};
-
-static struct clockdomain gfx_2420_clkdm = {
- .name = "gfx_clkdm",
- .pwrdm = { .name = "gfx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
-};
-
-static struct clockdomain core_l3_2420_clkdm = {
- .name = "core_l3_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .wkdep_srcs = core_2420_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
-};
-
-static struct clockdomain core_l4_2420_clkdm = {
- .name = "core_l4_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .wkdep_srcs = core_2420_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
-};
-
-static struct clockdomain dss_2420_clkdm = {
- .name = "dss_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
-};
-
-static struct clockdomain *clockdomains_omap242x[] __initdata = {
- &wkup_common_clkdm,
- &mpu_2420_clkdm,
- &iva1_2420_clkdm,
- &dsp_2420_clkdm,
- &gfx_2420_clkdm,
- &core_l3_2420_clkdm,
- &core_l4_2420_clkdm,
- &dss_2420_clkdm,
- NULL,
-};
-
-void __init omap242x_clockdomains_init(void)
-{
- if (!cpu_is_omap242x())
- return;
-
- clkdm_register_platform_funcs(&omap2_clkdm_operations);
- clkdm_register_clkdms(clockdomains_omap242x);
- clkdm_complete_init();
-}
diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c
deleted file mode 100644
index 0e97e178abaa..000000000000
--- a/arch/arm/mach-omap2/clockdomains2430_data.c
+++ /dev/null
@@ -1,181 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * OMAP2xxx clockdomains
- *
- * Copyright (C) 2008-2009 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Paul Walmsley, Jouni Högander
- *
- * This file contains clockdomains and clockdomain wakeup dependencies
- * for OMAP2xxx chips. Some notes:
- *
- * A useful validation rule for struct clockdomain: Any clockdomain
- * referenced by a wkdep_srcs must have a dep_bit assigned. So
- * wkdep_srcs are really just software-controllable dependencies.
- * Non-software-controllable dependencies do exist, but they are not
- * encoded below (yet).
- *
- * 24xx does not support programmable sleep dependencies (SLEEPDEP)
- *
- * The overly-specific dep_bit names are due to a bit name collision
- * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
- * value are the same for all powerdomains: 2
- *
- * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
- * sanity check?
- * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
- */
-
-/*
- * To-Do List
- * -> Port the Sleep/Wakeup dependencies for the domains
- * from the Power domain framework
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "clockdomain.h"
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
-#include "prm-regbits-24xx.h"
-
-/*
- * Clockdomain dependencies for wkdeps
- *
- * XXX Hardware dependencies (e.g., dependencies that cannot be
- * changed in software) are not included here yet, but should be.
- */
-
-/* Wakeup dependency source arrays */
-
-/* 2430-specific possible wakeup dependencies */
-
-/* 2430 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP, MDM */
-static struct clkdm_dep core_2430_wkdeps[] = {
- { .clkdm_name = "dsp_clkdm" },
- { .clkdm_name = "gfx_clkdm" },
- { .clkdm_name = "mpu_clkdm" },
- { .clkdm_name = "wkup_clkdm" },
- { .clkdm_name = "mdm_clkdm" },
- { NULL },
-};
-
-/* 2430 PM_WKDEP_MPU: CORE, DSP, WKUP, MDM */
-static struct clkdm_dep mpu_2430_wkdeps[] = {
- { .clkdm_name = "core_l3_clkdm" },
- { .clkdm_name = "core_l4_clkdm" },
- { .clkdm_name = "dsp_clkdm" },
- { .clkdm_name = "wkup_clkdm" },
- { .clkdm_name = "mdm_clkdm" },
- { NULL },
-};
-
-/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
-static struct clkdm_dep mdm_2430_wkdeps[] = {
- { .clkdm_name = "core_l3_clkdm" },
- { .clkdm_name = "core_l4_clkdm" },
- { .clkdm_name = "mpu_clkdm" },
- { .clkdm_name = "wkup_clkdm" },
- { NULL },
-};
-
-/*
- * 2430-only clockdomains
- */
-
-static struct clockdomain mpu_2430_clkdm = {
- .name = "mpu_clkdm",
- .pwrdm = { .name = "mpu_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = mpu_2430_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
-};
-
-/* Another case of bit name collisions between several registers: EN_MDM */
-static struct clockdomain mdm_clkdm = {
- .name = "mdm_clkdm",
- .pwrdm = { .name = "mdm_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
- .wkdep_srcs = mdm_2430_wkdeps,
- .clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
-};
-
-static struct clockdomain dsp_2430_clkdm = {
- .name = "dsp_clkdm",
- .pwrdm = { .name = "dsp_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
- .wkdep_srcs = dsp_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
-};
-
-static struct clockdomain gfx_2430_clkdm = {
- .name = "gfx_clkdm",
- .pwrdm = { .name = "gfx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l3_2430_clkdm = {
- .name = "core_l3_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP24XX_EN_CORE_SHIFT,
- .wkdep_srcs = core_2430_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l4_2430_clkdm = {
- .name = "core_l4_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP24XX_EN_CORE_SHIFT,
- .wkdep_srcs = core_2430_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
-};
-
-static struct clockdomain dss_2430_clkdm = {
- .name = "dss_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
-};
-
-static struct clockdomain *clockdomains_omap243x[] __initdata = {
- &wkup_common_clkdm,
- &mpu_2430_clkdm,
- &mdm_clkdm,
- &dsp_2430_clkdm,
- &gfx_2430_clkdm,
- &core_l3_2430_clkdm,
- &core_l4_2430_clkdm,
- &dss_2430_clkdm,
- NULL,
-};
-
-void __init omap243x_clockdomains_init(void)
-{
- if (!cpu_is_omap243x())
- return;
-
- clkdm_register_platform_funcs(&omap2_clkdm_operations);
- clkdm_register_clkdms(clockdomains_omap243x);
- clkdm_complete_init();
-}
-
diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
index 220c22f5e0f5..4d20c2720660 100644
--- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
@@ -8,7 +8,7 @@
* Paul Walmsley, Jouni Högander
*
* This file contains clockdomains and clockdomain wakeup/sleep
- * dependencies for the OMAP2/3 chips. Some notes:
+ * dependencies for the OMAP3 chips. Some notes:
*
* A useful validation rule for struct clockdomain: Any clockdomain
* referenced by a wkdep_srcs or sleepdep_srcs array must have a
@@ -16,8 +16,6 @@
* software-controllable dependencies. Non-software-controllable
* dependencies do exist, but they are not encoded below (yet).
*
- * 24xx does not support programmable sleep dependencies (SLEEPDEP)
- *
* The overly-specific dep_bit names are due to a bit name collision
* with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
* value are the same for all powerdomains: 2
@@ -39,10 +37,8 @@
#include "clockdomain.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
#include "cm-regbits-44xx.h"
-#include "prm-regbits-24xx.h"
#include "prm-regbits-34xx.h"
/*
@@ -54,29 +50,8 @@
/* Wakeup dependency source arrays */
-/* 2xxx-specific possible dependencies */
-
-/* 2xxx PM_WKDEP_GFX: CORE, MPU, WKUP */
-struct clkdm_dep gfx_24xx_wkdeps[] = {
- { .clkdm_name = "core_l3_clkdm" },
- { .clkdm_name = "core_l4_clkdm" },
- { .clkdm_name = "mpu_clkdm" },
- { .clkdm_name = "wkup_clkdm" },
- { NULL },
-};
-
-/* 2xxx PM_WKDEP_DSP: CORE, MPU, WKUP */
-struct clkdm_dep dsp_24xx_wkdeps[] = {
- { .clkdm_name = "core_l3_clkdm" },
- { .clkdm_name = "core_l4_clkdm" },
- { .clkdm_name = "mpu_clkdm" },
- { .clkdm_name = "wkup_clkdm" },
- { NULL },
-};
-
-
/*
- * OMAP2/3-common clockdomains
+ * OMAP3-common clockdomains
*
* Even though the 2420 has a single PRCM module from the
* interconnect's perspective, internally it does appear to have
diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h
deleted file mode 100644
index 59c14dbb6f87..000000000000
--- a/arch/arm/mach-omap2/cm-regbits-24xx.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_24XX_H
-#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_24XX_H
-
-/*
- * OMAP24XX Clock Management register bits
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
- *
- * Written by Paul Walmsley
- */
-
-#define OMAP24XX_AUTOSTATE_MPU_MASK (1 << 0)
-#define OMAP24XX_EN_DSS1_MASK (1 << 0)
-#define OMAP24XX_ST_MAILBOXES_SHIFT 30
-#define OMAP24XX_ST_HDQ_SHIFT 23
-#define OMAP2420_ST_I2C2_SHIFT 20
-#define OMAP2430_ST_I2CHS1_SHIFT 19
-#define OMAP2420_ST_I2C1_SHIFT 19
-#define OMAP2430_ST_I2CHS2_SHIFT 20
-#define OMAP24XX_ST_MCBSP2_SHIFT 16
-#define OMAP24XX_ST_MCBSP1_SHIFT 15
-#define OMAP2430_ST_MCBSP5_SHIFT 5
-#define OMAP2430_ST_MCBSP4_SHIFT 4
-#define OMAP2430_ST_MCBSP3_SHIFT 3
-#define OMAP24XX_ST_AES_SHIFT 3
-#define OMAP24XX_ST_RNG_SHIFT 2
-#define OMAP24XX_ST_SHA_SHIFT 1
-#define OMAP24XX_CLKSEL_DSS2_MASK (0x1 << 13)
-#define OMAP24XX_AUTOSTATE_DSS_MASK (1 << 2)
-#define OMAP24XX_AUTOSTATE_L4_MASK (1 << 1)
-#define OMAP24XX_AUTOSTATE_L3_MASK (1 << 0)
-#define OMAP24XX_AUTOSTATE_GFX_MASK (1 << 0)
-#define OMAP24XX_ST_MPU_WDT_SHIFT 3
-#define OMAP24XX_ST_32KSYNC_SHIFT 1
-#define OMAP24XX_EN_54M_PLL_SHIFT 6
-#define OMAP24XX_EN_96M_PLL_SHIFT 2
-#define OMAP24XX_ST_54M_APLL_SHIFT 9
-#define OMAP24XX_ST_96M_APLL_SHIFT 8
-#define OMAP24XX_AUTO_54M_MASK (0x3 << 6)
-#define OMAP24XX_AUTO_96M_MASK (0x3 << 2)
-#define OMAP24XX_AUTO_DPLL_SHIFT 0
-#define OMAP24XX_AUTO_DPLL_MASK (0x3 << 0)
-#define OMAP24XX_CORE_CLK_SRC_MASK (0x3 << 0)
-#define OMAP2420_AUTOSTATE_IVA_MASK (1 << 8)
-#define OMAP24XX_AUTOSTATE_DSP_MASK (1 << 0)
-#define OMAP2430_AUTOSTATE_MDM_MASK (1 << 0)
-#define OMAP24XX_CLKSTCTRL_DISABLE_AUTO 0x0
-#define OMAP24XX_CLKSTCTRL_ENABLE_AUTO 0x1
-#endif
diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c
deleted file mode 100644
index 1c6d69f4bf49..000000000000
--- a/arch/arm/mach-omap2/cm2xxx.c
+++ /dev/null
@@ -1,302 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * OMAP2xxx CM module functions
- *
- * Copyright (C) 2009 Nokia Corporation
- * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc.
- * Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include "prm2xxx.h"
-#include "cm.h"
-#include "cm2xxx.h"
-#include "cm-regbits-24xx.h"
-#include "clockdomain.h"
-
-/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
-#define DPLL_AUTOIDLE_DISABLE 0x0
-#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP 0x3
-
-/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */
-#define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0
-#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3
-
-/* CM_IDLEST_PLL bit value offset for APLLs (OMAP2xxx only) */
-#define EN_APLL_LOCKED 3
-
-static const u8 omap2xxx_cm_idlest_offs[] = {
- CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
-};
-
-/*
- *
- */
-
-static void _write_clktrctrl(u8 c, s16 module, u32 mask)
-{
- u32 v;
-
- v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
- v &= ~mask;
- v |= c << __ffs(mask);
- omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
-}
-
-static bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
-{
- u32 v;
-
- v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
- v &= mask;
- v >>= __ffs(mask);
-
- return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
-}
-
-static void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
-{
- _write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
-}
-
-static void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
-{
- _write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
-}
-
-/*
- * DPLL autoidle control
- */
-
-static void _omap2xxx_set_dpll_autoidle(u8 m)
-{
- u32 v;
-
- v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
- v &= ~OMAP24XX_AUTO_DPLL_MASK;
- v |= m << OMAP24XX_AUTO_DPLL_SHIFT;
- omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
-}
-
-void omap2xxx_cm_set_dpll_disable_autoidle(void)
-{
- _omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP);
-}
-
-void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
-{
- _omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
-}
-
-/**
- * omap2xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components
- * @idlest_reg: CM_IDLEST* virtual address
- * @prcm_inst: pointer to an s16 to return the PRCM instance offset
- * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID
- *
- * XXX This function is only needed until absolute register addresses are
- * removed from the OMAP struct clk records.
- */
-static int omap2xxx_cm_split_idlest_reg(struct clk_omap_reg *idlest_reg,
- s16 *prcm_inst,
- u8 *idlest_reg_id)
-{
- unsigned long offs;
- u8 idlest_offs;
- int i;
-
- idlest_offs = idlest_reg->offset & 0xff;
- for (i = 0; i < ARRAY_SIZE(omap2xxx_cm_idlest_offs); i++) {
- if (idlest_offs == omap2xxx_cm_idlest_offs[i]) {
- *idlest_reg_id = i + 1;
- break;
- }
- }
-
- if (i == ARRAY_SIZE(omap2xxx_cm_idlest_offs))
- return -EINVAL;
-
- offs = idlest_reg->offset;
- offs &= 0xff00;
- *prcm_inst = offs;
-
- return 0;
-}
-
-/*
- *
- */
-
-/**
- * omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby
- * @part: PRCM partition, ignored for OMAP2
- * @prcm_mod: PRCM module offset
- * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
- * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
- *
- * Wait for the PRCM to indicate that the module identified by
- * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon
- * success or -EBUSY if the module doesn't enable in time.
- */
-static int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
- u8 idlest_shift)
-{
- int ena = 0, i = 0;
- u8 cm_idlest_reg;
- u32 mask;
-
- if (!idlest_id || (idlest_id > ARRAY_SIZE(omap2xxx_cm_idlest_offs)))
- return -EINVAL;
-
- cm_idlest_reg = omap2xxx_cm_idlest_offs[idlest_id - 1];
-
- mask = 1 << idlest_shift;
- ena = mask;
-
- omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) &
- mask) == ena), MAX_MODULE_READY_TIME, i);
-
- return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
-}
-
-/* Clockdomain low-level functions */
-
-static void omap2xxx_clkdm_allow_idle(struct clockdomain *clkdm)
-{
- omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-}
-
-static void omap2xxx_clkdm_deny_idle(struct clockdomain *clkdm)
-{
- omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-}
-
-static int omap2xxx_clkdm_clk_enable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- if (!clkdm->clktrctrl_mask)
- return 0;
-
- hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
- if (!hwsup && clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
- omap2xxx_clkdm_wakeup(clkdm);
-
- return 0;
-}
-
-static int omap2xxx_clkdm_clk_disable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- if (!clkdm->clktrctrl_mask)
- return 0;
-
- hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-
- if (!hwsup && clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
- omap2xxx_clkdm_sleep(clkdm);
-
- return 0;
-}
-
-struct clkdm_ops omap2_clkdm_operations = {
- .clkdm_add_wkdep = omap2_clkdm_add_wkdep,
- .clkdm_del_wkdep = omap2_clkdm_del_wkdep,
- .clkdm_read_wkdep = omap2_clkdm_read_wkdep,
- .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
- .clkdm_sleep = omap2xxx_clkdm_sleep,
- .clkdm_wakeup = omap2xxx_clkdm_wakeup,
- .clkdm_allow_idle = omap2xxx_clkdm_allow_idle,
- .clkdm_deny_idle = omap2xxx_clkdm_deny_idle,
- .clkdm_clk_enable = omap2xxx_clkdm_clk_enable,
- .clkdm_clk_disable = omap2xxx_clkdm_clk_disable,
-};
-
-int omap2xxx_cm_fclks_active(void)
-{
- u32 f1, f2;
-
- f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
- f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
-
- return (f1 | f2) ? 1 : 0;
-}
-
-int omap2xxx_cm_mpu_retention_allowed(void)
-{
- u32 l;
-
- /* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
- l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
- if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK |
- OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK |
- OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK))
- return 0;
- /* Check for UART3. */
- l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
- if (l & OMAP24XX_EN_UART3_MASK)
- return 0;
-
- return 1;
-}
-
-u32 omap2xxx_cm_get_core_clk_src(void)
-{
- u32 v;
-
- v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
- v &= OMAP24XX_CORE_CLK_SRC_MASK;
-
- return v;
-}
-
-u32 omap2xxx_cm_get_core_pll_config(void)
-{
- return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-}
-
-void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm)
-{
- u32 tmp;
-
- omap2_cm_write_mod_reg(mpu, MPU_MOD, CM_CLKSEL);
- omap2_cm_write_mod_reg(dsp, OMAP24XX_DSP_MOD, CM_CLKSEL);
- omap2_cm_write_mod_reg(gfx, GFX_MOD, CM_CLKSEL);
- tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) &
- OMAP24XX_CLKSEL_DSS2_MASK;
- omap2_cm_write_mod_reg(core | tmp, CORE_MOD, CM_CLKSEL1);
- if (mdm)
- omap2_cm_write_mod_reg(mdm, OMAP2430_MDM_MOD, CM_CLKSEL);
-}
-
-/*
- *
- */
-
-static const struct cm_ll_data omap2xxx_cm_ll_data = {
- .split_idlest_reg = &omap2xxx_cm_split_idlest_reg,
- .wait_module_ready = &omap2xxx_cm_wait_module_ready,
-};
-
-int __init omap2xxx_cm_init(const struct omap_prcm_init_data *data)
-{
- return cm_register(&omap2xxx_cm_ll_data);
-}
-
-static void __exit omap2xxx_cm_exit(void)
-{
- cm_unregister(&omap2xxx_cm_ll_data);
-}
-__exitcall(omap2xxx_cm_exit);
diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h
deleted file mode 100644
index 7cbeff15ffb0..000000000000
--- a/arch/arm/mach-omap2/cm2xxx.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * OMAP2xxx Clock Management (CM) register definitions
- *
- * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- * Paul Walmsley
- *
- * The CM hardware modules on the OMAP2/3 are quite similar to each
- * other. The CM modules/instances on OMAP4 are quite different, so
- * they are handled in a separate file.
- */
-#ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_H
-#define __ARCH_ASM_MACH_OMAP2_CM2XXX_H
-
-#include "prcm-common.h"
-#include "cm2xxx_3xxx.h"
-
-#define OMAP2420_CM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
-#define OMAP2430_CM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
-
-/*
- * Module specific CM register offsets from CM_BASE + domain offset
- * Use cm_{read,write}_mod_reg() with these registers.
- * These register offsets generally appear in more than one PRCM submodule.
- */
-
-/* OMAP2-specific register offsets */
-
-#define OMAP24XX_CM_FCLKEN2 0x0004
-#define OMAP24XX_CM_ICLKEN4 0x001c
-#define OMAP24XX_CM_AUTOIDLE4 0x003c
-#define OMAP24XX_CM_IDLEST4 0x002c
-
-/* CM_IDLEST bit field values to indicate deasserted IdleReq */
-
-#define OMAP24XX_CM_IDLEST_VAL 0
-
-
-/* Clock management domain register get/set */
-
-#ifndef __ASSEMBLER__
-
-extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
-extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
-
-extern int omap2xxx_cm_fclks_active(void);
-extern int omap2xxx_cm_mpu_retention_allowed(void);
-extern u32 omap2xxx_cm_get_core_clk_src(void);
-extern u32 omap2xxx_cm_get_core_pll_config(void);
-extern void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core,
- u32 mdm);
-
-int __init omap2xxx_cm_init(const struct omap_prcm_init_data *data);
-
-#endif
-
-#endif
diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c
index 87f2c2d2d754..fc16cd1fd2d5 100644
--- a/arch/arm/mach-omap2/cm_common.c
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -15,7 +15,6 @@
#include <linux/of.h>
#include <linux/of_address.h>
-#include "cm2xxx.h"
#include "cm3xxx.h"
#include "cm33xx.h"
#include "cm44xx.h"
@@ -230,14 +229,6 @@ static struct omap_prcm_init_data cm2_data __initdata = {
};
#endif
-#ifdef CONFIG_ARCH_OMAP2
-static struct omap_prcm_init_data omap2_prcm_data __initdata = {
- .index = TI_CLKM_CM,
- .init = omap2xxx_cm_init,
- .flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE,
-};
-#endif
-
#ifdef CONFIG_ARCH_OMAP3
static struct omap_prcm_init_data omap3_cm_data __initdata = {
.index = TI_CLKM_CM,
@@ -269,9 +260,6 @@ static struct omap_prcm_init_data am4_prcm_data __initdata = {
#endif
static const struct of_device_id omap_cm_dt_match_table[] __initconst = {
-#ifdef CONFIG_ARCH_OMAP2
- { .compatible = "ti,omap2-prcm", .data = &omap2_prcm_data },
-#endif
#ifdef CONFIG_ARCH_OMAP3
{ .compatible = "ti,omap3-cm", .data = &omap3_cm_data },
#endif
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
deleted file mode 100644
index 69694af71475..000000000000
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __OMAP_COMMON_BOARD_DEVICES__
-#define __OMAP_COMMON_BOARD_DEVICES__
-
-#include <linux/mfd/menelaus.h>
-
-void *n8x0_legacy_init(void);
-
-extern struct menelaus_platform_data n8x0_menelaus_platform_data;
-
-#endif /* __OMAP_COMMON_BOARD_DEVICES__ */
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 9d60799e9752..f8ed97044ade 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -102,8 +102,6 @@ static inline void omap5_realtime_timer_init(void)
}
#endif
-void omap2420_init_early(void);
-void omap2430_init_early(void);
void omap3430_init_early(void);
void omap3630_init_early(void);
void am33xx_init_early(void);
@@ -130,14 +128,6 @@ static inline void omap_soc_device_init(void)
}
#endif
-#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
-void omap2xxx_restart(enum reboot_mode mode, const char *cmd);
-#else
-static inline void omap2xxx_restart(enum reboot_mode mode, const char *cmd)
-{
-}
-#endif
-
#ifdef CONFIG_SOC_AM33XX
void am33xx_restart(enum reboot_mode mode, const char *cmd);
#else
@@ -183,8 +173,6 @@ static inline void omap_barrier_reserve_memblock(void)
/* This gets called from mach-omap2/io.c, do not call this */
void __init omap2_set_globals_tap(u32 class, void __iomem *tap);
-void __init omap242x_map_io(void);
-void __init omap243x_map_io(void);
void __init omap3_map_io(void);
void __init am33xx_map_io(void);
void __init omap4_map_io(void);
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index 7e7440533bf9..3ab1c6e6dde6 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -19,19 +19,11 @@
#include "am33xx.h"
#ifndef __ASSEMBLY__
-#define OMAP242X_CTRL_REGADDR(reg) \
- OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg) \
- OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
#define AM33XX_CTRL_REGADDR(reg) \
AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg))
#else
-#define OMAP242X_CTRL_REGADDR(reg) \
- OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg) \
- OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
#define AM33XX_CTRL_REGADDR(reg) \
@@ -74,52 +66,6 @@
#define OMAP2_CONTROL_RPUB_KEY_H_2 (OMAP2_CONTROL_GENERAL + 0x0098)
#define OMAP2_CONTROL_RPUB_KEY_H_3 (OMAP2_CONTROL_GENERAL + 0x009c)
-/* 242x-only CONTROL_GENERAL register offsets */
-#define OMAP242X_CONTROL_DEVCONF OMAP2_CONTROL_DEVCONF0 /* match TRM */
-#define OMAP242X_CONTROL_OCM_RAM_PERM (OMAP2_CONTROL_GENERAL + 0x0068)
-
-/* 243x-only CONTROL_GENERAL register offsets */
-/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */
-#define OMAP243X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0078)
-#define OMAP243X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x007c)
-#define OMAP243X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
-#define OMAP243X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
-#define OMAP243X_CONTROL_IVA2_GEMCFG (OMAP2_CONTROL_GENERAL + 0x0198)
-#define OMAP243X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x0230)
-
-/* 24xx-only CONTROL_GENERAL register offsets */
-#define OMAP24XX_CONTROL_DEBOBS (OMAP2_CONTROL_GENERAL + 0x0000)
-#define OMAP24XX_CONTROL_EMU_SUPPORT (OMAP2_CONTROL_GENERAL + 0x0008)
-#define OMAP24XX_CONTROL_SEC_TEST (OMAP2_CONTROL_GENERAL + 0x0044)
-#define OMAP24XX_CONTROL_PSA_CTRL (OMAP2_CONTROL_GENERAL + 0x0048)
-#define OMAP24XX_CONTROL_PSA_CMD (OMAP2_CONTROL_GENERAL + 0x004c)
-#define OMAP24XX_CONTROL_PSA_VALUE (OMAP2_CONTROL_GENERAL + 0x0050)
-#define OMAP24XX_CONTROL_SEC_EMU (OMAP2_CONTROL_GENERAL + 0x0060)
-#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064)
-#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074)
-#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080)
-#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084)
-#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088)
-#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c)
-#define OMAP24XX_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a0)
-#define OMAP24XX_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00a4)
-#define OMAP24XX_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00a8)
-#define OMAP24XX_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00ac)
-#define OMAP24XX_CONTROL_CUST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00b0)
-#define OMAP24XX_CONTROL_CUST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00b4)
-#define OMAP24XX_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c0)
-#define OMAP24XX_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00c4)
-#define OMAP24XX_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00c8)
-#define OMAP24XX_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00cc)
-#define OMAP24XX_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d0)
-#define OMAP24XX_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00d4)
-#define OMAP24XX_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00d8)
-#define OMAP24XX_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00dc)
-#define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0)
-#define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4)
-
#define OMAP343X_CONTROL_PADCONF_SYSNIRQ (OMAP2_CONTROL_INTERFACE + 0x01b0)
/* 34xx-only CONTROL_GENERAL register offsets */
@@ -311,14 +257,12 @@
*/
/* CONTROL_DEVCONF0 bits */
#define OMAP2_MMCSDIO1ADPCLKISEL (1 << 24) /* MMC1 loop back clock */
-#define OMAP24XX_USBSTANDBYCTRL (1 << 15)
#define OMAP2_MCBSP2_CLKS_MASK (1 << 6)
#define OMAP2_MCBSP1_FSR_MASK (1 << 4)
#define OMAP2_MCBSP1_CLKR_MASK (1 << 3)
#define OMAP2_MCBSP1_CLKS_MASK (1 << 2)
/* CONTROL_DEVCONF1 bits */
-#define OMAP243X_MMC1_ACTIVE_OVERWRITE (1 << 31)
#define OMAP2_MMCSDIO2ADPCLKISEL (1 << 6) /* MMC2 loop back clock */
#define OMAP2_MCBSP5_CLKS_MASK (1 << 4) /* > 242x */
#define OMAP2_MCBSP4_CLKS_MASK (1 << 2) /* > 242x */
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index dbec3bb9fbf4..addc14898bd5 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -124,9 +124,7 @@ static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
static enum omapdss_version __init omap_display_get_version(void)
{
- if (cpu_is_omap24xx())
- return OMAPDSS_VER_OMAP24xx;
- else if (cpu_is_omap3630())
+ if (cpu_is_omap3630())
return OMAPDSS_VER_OMAP3630;
else if (cpu_is_omap34xx()) {
if (soc_is_am35xx()) {
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index 830cd4e7eb44..3a6b7b4620ca 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -82,39 +82,6 @@ static unsigned configure_dma_errata(void)
{
unsigned errata = 0;
- /*
- * Errata applicable for OMAP2430ES1.0 and all omap2420
- *
- * I.
- * Erratum ID: Not Available
- * Inter Frame DMA buffering issue DMA will wrongly
- * buffer elements if packing and bursting is enabled. This might
- * result in data gets stalled in FIFO at the end of the block.
- * Workaround: DMA channels must have BUFFERING_DISABLED bit set to
- * guarantee no data will stay in the DMA FIFO in case inter frame
- * buffering occurs
- *
- * II.
- * Erratum ID: Not Available
- * DMA may hang when several channels are used in parallel
- * In the following configuration, DMA channel hanging can occur:
- * a. Channel i, hardware synchronized, is enabled
- * b. Another channel (Channel x), software synchronized, is enabled.
- * c. Channel i is disabled before end of transfer
- * d. Channel i is reenabled.
- * e. Steps 1 to 4 are repeated a certain number of times.
- * f. A third channel (Channel y), software synchronized, is enabled.
- * Channel x and Channel y may hang immediately after step 'f'.
- * Workaround:
- * For any channel used - make sure NextLCH_ID is set to the value j.
- */
- if (cpu_is_omap2420() || (cpu_is_omap2430() &&
- (omap_type() == OMAP2430_REV_ES1_0))) {
-
- SET_DMA_ERRATA(DMA_ERRATA_IFRAME_BUFFERING);
- SET_DMA_ERRATA(DMA_ERRATA_PARALLEL_CHANNELS);
- }
-
/*
* Erratum ID: i378: OMAP2+: sDMA Channel is not disabled
* after a transaction error.
@@ -162,16 +129,6 @@ static unsigned configure_dma_errata(void)
return errata;
}
-static const struct dma_slave_map omap24xx_sdma_dt_map[] = {
- /* external DMA requests when tusb6010 is used */
- { "musb-hdrc.1.auto", "dmareq0", SDMA_FILTER_PARAM(2) },
- { "musb-hdrc.1.auto", "dmareq1", SDMA_FILTER_PARAM(3) },
- { "musb-hdrc.1.auto", "dmareq2", SDMA_FILTER_PARAM(14) }, /* OMAP2420 only */
- { "musb-hdrc.1.auto", "dmareq3", SDMA_FILTER_PARAM(15) }, /* OMAP2420 only */
- { "musb-hdrc.1.auto", "dmareq4", SDMA_FILTER_PARAM(16) }, /* OMAP2420 only */
- { "musb-hdrc.1.auto", "dmareq5", SDMA_FILTER_PARAM(64) }, /* OMAP2420 only */
-};
-
static struct omap_dma_dev_attr dma_attr = {
.dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
IS_CSSA_32 | IS_CDSA_32,
@@ -188,15 +145,7 @@ struct omap_system_dma_plat_info dma_plat_info = {
static int __init omap2_system_dma_init(void)
{
dma_plat_info.errata = configure_dma_errata();
-
- if (soc_is_omap24xx()) {
- /* DMA slave map for drivers not yet converted to DT */
- dma_plat_info.slave_map = omap24xx_sdma_dt_map;
- dma_plat_info.slavecnt = ARRAY_SIZE(omap24xx_sdma_dt_map);
- }
-
- if (!soc_is_omap242x())
- dma_attr.dev_caps |= IS_RW_PRIORITY;
+ dma_attr.dev_caps |= IS_RW_PRIORITY;
if (soc_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
dma_attr.dev_caps |= HS_CHANNELS_RESERVED;
diff --git a/arch/arm/mach-omap2/fb.c b/arch/arm/mach-omap2/fb.c
index 0f8c8efe3ae8..9a425c36f996 100644
--- a/arch/arm/mach-omap2/fb.c
+++ b/arch/arm/mach-omap2/fb.c
@@ -27,15 +27,6 @@
* The first memory resource is the register region for VRFB,
* the rest are VRFB virtual memory areas for each VRFB context.
*/
-
-static const struct resource omap2_vrfb_resources[] = {
- DEFINE_RES_MEM_NAMED(0x68008000u, 0x40, "vrfb-regs"),
- DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"),
- DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"),
- DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"),
- DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"),
-};
-
static const struct resource omap3_vrfb_resources[] = {
DEFINE_RES_MEM_NAMED(0x6C000180u, 0xc0, "vrfb-regs"),
DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"),
@@ -58,10 +49,7 @@ int __init omap_init_vrfb(void)
const struct resource *res;
unsigned int num_res;
- if (cpu_is_omap24xx()) {
- res = omap2_vrfb_resources;
- num_res = ARRAY_SIZE(omap2_vrfb_resources);
- } else if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx()) {
res = omap3_vrfb_resources;
num_res = ARRAY_SIZE(omap3_vrfb_resources);
} else {
diff --git a/arch/arm/mach-omap2/gpmc.h b/arch/arm/mach-omap2/gpmc.h
deleted file mode 100644
index e060f1b5c27d..000000000000
--- a/arch/arm/mach-omap2/gpmc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * General-Purpose Memory Controller for OMAP2
- *
- * Copyright (C) 2005-2006 Nokia Corporation
- *
- * Do not include this file in any new code, this will get removed
- * once omap3 boots in device tree only mode.
- */
-#include <linux/omap-gpmc.h>
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index 3b4b9514f4fa..d956c70f8899 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -39,7 +39,7 @@ int omap_i2c_reset(struct omap_hwmod *oh)
u16 i2c_con;
int c = 0;
- if (soc_is_omap24xx() || soc_is_omap34xx() || soc_is_am35xx())
+ if (soc_is_omap34xx() || soc_is_am35xx())
i2c_con = OMAP2_I2C_CON_OFFSET;
else
i2c_con = OMAP4_I2C_CON_OFFSET;
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index cf2bfb447ee2..3e731dd21311 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -55,9 +55,7 @@ int omap_type(void)
if (val < OMAP2_DEVICETYPE_MASK)
return val;
- if (soc_is_omap24xx()) {
- val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
- } else if (soc_is_ti81xx()) {
+ if (soc_is_ti81xx()) {
val = omap_ctrl_readl(TI81XX_CONTROL_STATUS);
} else if (soc_is_am33xx() || soc_is_am43xx()) {
val = omap_ctrl_readl(AM33XX_CONTROL_STATUS);
@@ -99,22 +97,6 @@ EXPORT_SYMBOL(omap_type);
#define read_tap_reg(reg) readl_relaxed(tap_base + (reg))
-struct omap_id {
- u16 hawkeye; /* Silicon type (Hawkeye id) */
- u8 dev; /* Device type from production_id reg */
- u32 type; /* Combined type id copied to omap_revision */
-};
-
-/* Register values to detect the OMAP version */
-static struct omap_id omap_ids[] __initdata = {
- { .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200024 },
- { .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201024 },
- { .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202024 },
- { .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220024 },
- { .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230024 },
- { .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300024 },
-};
-
static void __iomem *tap_base;
static u16 tap_prod_id;
@@ -145,62 +127,6 @@ static int __init omap_feed_randpool(void)
}
omap_device_initcall(omap_feed_randpool);
-void __init omap2xxx_check_revision(void)
-{
- int i, j;
- u32 idcode, prod_id;
- u16 hawkeye;
- u8 dev_type, rev;
- struct omap_die_id odi;
-
- idcode = read_tap_reg(OMAP_TAP_IDCODE);
- prod_id = read_tap_reg(tap_prod_id);
- hawkeye = (idcode >> 12) & 0xffff;
- rev = (idcode >> 28) & 0x0f;
- dev_type = (prod_id >> 16) & 0x0f;
- omap_get_die_id(&odi);
-
- pr_debug("OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
- idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
- pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n", odi.id_0);
- pr_debug("OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
- odi.id_1, (odi.id_1 >> 28) & 0xf);
- pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n", odi.id_2);
- pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n", odi.id_3);
- pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
- prod_id, dev_type);
-
- /* Check hawkeye ids */
- for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
- if (hawkeye == omap_ids[i].hawkeye)
- break;
- }
-
- if (i == ARRAY_SIZE(omap_ids)) {
- printk(KERN_ERR "Unknown OMAP CPU id\n");
- return;
- }
-
- for (j = i; j < ARRAY_SIZE(omap_ids); j++) {
- if (dev_type == omap_ids[j].dev)
- break;
- }
-
- if (j == ARRAY_SIZE(omap_ids)) {
- pr_err("Unknown OMAP device type. Handling it as OMAP%04x\n",
- omap_ids[i].type >> 16);
- j = i;
- }
-
- sprintf(soc_name, "OMAP%04x", omap_rev() >> 16);
- sprintf(soc_rev, "ES%x", (omap_rev() >> 12) & 0xf);
-
- pr_info("%s", soc_name);
- if ((omap_rev() >> 8) & 0x0f)
- pr_cont("%s", soc_rev);
- pr_cont("\n");
-}
-
#define OMAP3_SHOW_FEATURE(feat) \
if (omap3_has_ ##feat()) \
n += scnprintf(buf + n, sizeof(buf) - n, #feat " ");
@@ -750,9 +676,7 @@ static const char * const omap_types[] = {
static const char * __init omap_get_family(void)
{
- if (soc_is_omap24xx())
- return kasprintf(GFP_KERNEL, "OMAP2");
- else if (soc_is_omap34xx())
+ if (soc_is_omap34xx())
return kasprintf(GFP_KERNEL, "OMAP3");
else if (soc_is_omap44xx())
return kasprintf(GFP_KERNEL, "OMAP4");
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 14ec3f78000b..1c945be5e7cc 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -35,7 +35,6 @@
#include "sdrc.h"
#include "control.h"
#include "sram.h"
-#include "cm2xxx.h"
#include "cm3xxx.h"
#include "cm33xx.h"
#include "cm44xx.h"
@@ -43,11 +42,9 @@
#include "cm.h"
#include "prcm_mpu44xx.h"
#include "prminst44xx.h"
-#include "prm2xxx.h"
#include "prm3xxx.h"
#include "prm33xx.h"
#include "prm44xx.h"
-#include "opp2xxx.h"
#include "omap-secure.h"
/*
@@ -61,76 +58,6 @@ static int (*omap_clk_soc_init)(void);
* default mapping provided here.
*/
-#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
-static struct map_desc omap24xx_io_desc[] __initdata = {
- {
- .virtual = L3_24XX_VIRT,
- .pfn = __phys_to_pfn(L3_24XX_PHYS),
- .length = L3_24XX_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = L4_24XX_VIRT,
- .pfn = __phys_to_pfn(L4_24XX_PHYS),
- .length = L4_24XX_SIZE,
- .type = MT_DEVICE
- },
-};
-
-#ifdef CONFIG_SOC_OMAP2420
-static struct map_desc omap242x_io_desc[] __initdata = {
- {
- .virtual = DSP_MEM_2420_VIRT,
- .pfn = __phys_to_pfn(DSP_MEM_2420_PHYS),
- .length = DSP_MEM_2420_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = DSP_IPI_2420_VIRT,
- .pfn = __phys_to_pfn(DSP_IPI_2420_PHYS),
- .length = DSP_IPI_2420_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = DSP_MMU_2420_VIRT,
- .pfn = __phys_to_pfn(DSP_MMU_2420_PHYS),
- .length = DSP_MMU_2420_SIZE,
- .type = MT_DEVICE
- },
-};
-
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-static struct map_desc omap243x_io_desc[] __initdata = {
- {
- .virtual = L4_WK_243X_VIRT,
- .pfn = __phys_to_pfn(L4_WK_243X_PHYS),
- .length = L4_WK_243X_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = OMAP243X_GPMC_VIRT,
- .pfn = __phys_to_pfn(OMAP243X_GPMC_PHYS),
- .length = OMAP243X_GPMC_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = OMAP243X_SDRC_VIRT,
- .pfn = __phys_to_pfn(OMAP243X_SDRC_PHYS),
- .length = OMAP243X_SDRC_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = OMAP243X_SMS_VIRT,
- .pfn = __phys_to_pfn(OMAP243X_SMS_PHYS),
- .length = OMAP243X_SMS_SIZE,
- .type = MT_DEVICE
- },
-};
-#endif
-#endif
-
#ifdef CONFIG_ARCH_OMAP3
static struct map_desc omap34xx_io_desc[] __initdata = {
{
@@ -305,22 +232,6 @@ static struct map_desc dra7xx_io_desc[] __initdata = {
};
#endif
-#ifdef CONFIG_SOC_OMAP2420
-void __init omap242x_map_io(void)
-{
- iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
- iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-void __init omap243x_map_io(void)
-{
- iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
- iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
-}
-#endif
-
#ifdef CONFIG_ARCH_OMAP3
void __init omap3_map_io(void)
{
@@ -365,6 +276,8 @@ void __init dra7xx_map_io(void)
omap_barriers_init();
}
#endif
+
+#ifdef CONFIG_ARCH_OMAP3
/*
* omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
*
@@ -399,7 +312,6 @@ static int __init _omap2_init_reprogram_sdrc(void)
return v;
}
-#ifdef CONFIG_OMAP_HWMOD
static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
{
return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
@@ -412,55 +324,11 @@ static void __init __maybe_unused omap_hwmod_init_postsetup(void)
/* Set the default postsetup state for all hwmods */
omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state);
}
-#else
-static inline void omap_hwmod_init_postsetup(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2420
-void __init omap2420_init_early(void)
-{
- omap2_set_globals_tap(OMAP242X_CLASS, OMAP2_L4_IO_ADDRESS(0x48014000));
- omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
- OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE));
- omap2_control_base_init();
- omap2xxx_check_revision();
- omap2_prcm_base_init();
- omap2xxx_voltagedomains_init();
- omap242x_powerdomains_init();
- omap242x_clockdomains_init();
- omap2420_hwmod_init();
- omap_hwmod_init_postsetup();
- omap_clk_soc_init = omap2420_dt_clk_init;
- rate_table = omap2420_rate_table;
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-void __init omap2430_init_early(void)
-{
- omap2_set_globals_tap(OMAP243X_CLASS, OMAP2_L4_IO_ADDRESS(0x4900a000));
- omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
- OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE));
- omap2_control_base_init();
- omap2xxx_check_revision();
- omap2_prcm_base_init();
- omap2xxx_voltagedomains_init();
- omap243x_powerdomains_init();
- omap243x_clockdomains_init();
- omap2430_hwmod_init();
- omap_hwmod_init_postsetup();
- omap_clk_soc_init = omap2430_dt_clk_init;
- rate_table = omap2430_rate_table;
-}
-#endif
/*
* Currently only board-omap3beagle.c should call this because of the
* same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
*/
-#ifdef CONFIG_ARCH_OMAP3
static void __init omap3_init_early(void)
{
omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000));
@@ -661,16 +529,18 @@ void __init dra7xx_init_late(void)
#endif
+#ifdef CONFIG_ARCH_OMAP3
void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1)
{
omap_sram_init();
- if (cpu_is_omap24xx() || omap3_has_sdrc()) {
+ if (omap3_has_sdrc()) {
omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
_omap2_init_reprogram_sdrc();
}
}
+#endif
int __init omap_clk_init(void)
{
diff --git a/arch/arm/mach-omap2/iomap.h b/arch/arm/mach-omap2/iomap.h
index 6191d244438a..403444bb6924 100644
--- a/arch/arm/mach-omap2/iomap.h
+++ b/arch/arm/mach-omap2/iomap.h
@@ -48,52 +48,6 @@
#define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */
#define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
-/*
- * ----------------------------------------------------------------------------
- * Omap2 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-/* We map both L3 and L4 on OMAP2 */
-#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/
-#define L3_24XX_VIRT (L3_24XX_PHYS + OMAP2_L3_IO_OFFSET)
-#define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
-#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */
-#define L4_24XX_VIRT (L4_24XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */
-
-#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */
-#define L4_WK_243X_VIRT (L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_WK_243X_SIZE SZ_1M
-#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE
-#define OMAP243X_GPMC_VIRT (OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
- /* 0x6e000000 --> 0xfe000000 */
-#define OMAP243X_GPMC_SIZE SZ_1M
-#define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE
- /* 0x6D000000 --> 0xfd000000 */
-#define OMAP243X_SDRC_VIRT (OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP243X_SDRC_SIZE SZ_1M
-#define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE
- /* 0x6c000000 --> 0xfc000000 */
-#define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP243X_SMS_SIZE SZ_1M
-
-/* 2420 IVA */
-#define DSP_MEM_2420_PHYS OMAP2420_DSP_MEM_BASE
- /* 0x58000000 --> 0xfc100000 */
-#define DSP_MEM_2420_VIRT 0xfc100000
-#define DSP_MEM_2420_SIZE 0x28000
-#define DSP_IPI_2420_PHYS OMAP2420_DSP_IPI_BASE
- /* 0x59000000 --> 0xfc128000 */
-#define DSP_IPI_2420_VIRT 0xfc128000
-#define DSP_IPI_2420_SIZE SZ_4K
-#define DSP_MMU_2420_PHYS OMAP2420_DSP_MMU_BASE
- /* 0x5a000000 --> 0xfc129000 */
-#define DSP_MMU_2420_VIRT 0xfc129000
-#define DSP_MMU_2420_SIZE SZ_4K
-
-/* 2430 IVA2.1 - currently unmapped */
-
/*
* ----------------------------------------------------------------------------
* Omap3 specific IO mapping
diff --git a/arch/arm/mach-omap2/l3_2xxx.h b/arch/arm/mach-omap2/l3_2xxx.h
deleted file mode 100644
index 6297c62428ac..000000000000
--- a/arch/arm/mach-omap2/l3_2xxx.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/plat-omap/include/plat/l3_2xxx.h - L3 firewall definitions
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
- * Sumit Semwal
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
-
-/* L3 CONNIDs */
-/* Display Sub system (DSS) */
-#define OMAP2_L3_CORE_FW_CONNID_DSS 8
-
-#endif
diff --git a/arch/arm/mach-omap2/l4_2xxx.h b/arch/arm/mach-omap2/l4_2xxx.h
deleted file mode 100644
index 418e1072d730..000000000000
--- a/arch/arm/mach-omap2/l4_2xxx.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/plat-omap/include/plat/l4_2xxx.h - L4 firewall definitions
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
- * Sumit Semwal
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
-
-/* L4 CORE */
-/* Display Sub system (DSS) */
-#define OMAP2420_L4_CORE_FW_DSS_CORE_REGION 28
-#define OMAP2420_L4_CORE_FW_DSS_DISPC_REGION 29
-#define OMAP2420_L4_CORE_FW_DSS_RFBI_REGION 30
-#define OMAP2420_L4_CORE_FW_DSS_VENC_REGION 31
-#define OMAP2420_L4_CORE_FW_DSS_TA_REGION 32
-
-#endif
diff --git a/arch/arm/mach-omap2/mmc.h b/arch/arm/mach-omap2/mmc.h
deleted file mode 100644
index b5533e93cb63..000000000000
--- a/arch/arm/mach-omap2/mmc.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-
-#define OMAP24XX_NR_MMC 2
-#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE
-#define OMAP2_MMC1_BASE 0x4809c000
-
-#define OMAP4_MMC_REG_OFFSET 0x100
-
-struct omap_hwmod;
-
-#ifdef CONFIG_SOC_OMAP2420
-int omap_msdi_reset(struct omap_hwmod *oh);
-#else
-static inline int omap_msdi_reset(struct omap_hwmod *oh)
-{
- return 0;
-}
-#endif
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
deleted file mode 100644
index 552b2fa4e4f1..000000000000
--- a/arch/arm/mach-omap2/msdi.c
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * MSDI IP block reset
- *
- * Copyright (C) 2012 Texas Instruments, Inc.
- * Paul Walmsley
- *
- * XXX What about pad muxing?
- */
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-
-#include "prm.h"
-#include "common.h"
-#include "control.h"
-#include "omap_hwmod.h"
-#include "omap_device.h"
-#include "mmc.h"
-
-/*
- * MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register
- * from the IP block's base address
- */
-#define MSDI_CON_OFFSET 0x0c
-
-/* Register bitfields in the CON register */
-#define MSDI_CON_POW_MASK BIT(11)
-#define MSDI_CON_CLKD_MASK (0x3f << 0)
-#define MSDI_CON_CLKD_SHIFT 0
-
-/* MSDI_TARGET_RESET_CLKD: clock divisor to use throughout the reset */
-#define MSDI_TARGET_RESET_CLKD 0x3ff
-
-/**
- * omap_msdi_reset - reset the MSDI IP block
- * @oh: struct omap_hwmod *
- *
- * The MSDI IP block on OMAP2420 has to have both the POW and CLKD
- * fields set inside its CON register for a reset to complete
- * successfully. This is not documented in the TRM. For CLKD, we use
- * the value that results in the lowest possible clock rate, to attempt
- * to avoid disturbing any cards.
- */
-int omap_msdi_reset(struct omap_hwmod *oh)
-{
- u16 v = 0;
- int c = 0;
-
- /* Write to the SOFTRESET bit */
- omap_hwmod_softreset(oh);
-
- /* Enable the MSDI core and internal clock */
- v |= MSDI_CON_POW_MASK;
- v |= MSDI_TARGET_RESET_CLKD << MSDI_CON_CLKD_SHIFT;
- omap_hwmod_write(v, oh, MSDI_CON_OFFSET);
-
- /* Poll on RESETDONE bit */
- omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs)
- & SYSS_RESETDONE_MASK),
- MAX_MODULE_SOFTRESET_WAIT, c);
-
- if (c == MAX_MODULE_SOFTRESET_WAIT)
- pr_warn("%s: %s: softreset failed (waited %d usec)\n",
- __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
- else
- pr_debug("%s: %s: softreset in %d usec\n", __func__,
- oh->name, c);
-
- /* Disable the MSDI internal clock */
- v &= ~MSDI_CON_CLKD_MASK;
- omap_hwmod_write(v, oh, MSDI_CON_OFFSET);
-
- return 0;
-}
diff --git a/arch/arm/mach-omap2/omap2-restart.c b/arch/arm/mach-omap2/omap2-restart.c
deleted file mode 100644
index fdcc75c97d70..000000000000
--- a/arch/arm/mach-omap2/omap2-restart.c
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * omap2-restart.c - code common to all OMAP2xxx machines.
- *
- * Copyright (C) 2012 Texas Instruments
- * Paul Walmsley
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "common.h"
-#include "prm.h"
-
-/*
- * reset_virt_prcm_set_ck, reset_sys_ck: pointers to the virt_prcm_set
- * clock and the sys_ck. Used during the reset process
- */
-static struct clk *reset_virt_prcm_set_ck, *reset_sys_ck;
-
-/* Reboot handling */
-
-/**
- * omap2xxx_restart - Set DPLL to bypass mode for reboot to work
- *
- * Set the DPLL to bypass so that reboot completes successfully. No
- * return value.
- */
-void omap2xxx_restart(enum reboot_mode mode, const char *cmd)
-{
- u32 rate;
-
- rate = clk_get_rate(reset_sys_ck);
- clk_set_rate(reset_virt_prcm_set_ck, rate);
-
- /* XXX Should save the cmd argument for use after the reboot */
-
- omap_prm_reset_system();
-}
-
-/**
- * omap2xxx_common_look_up_clks_for_reset - look up clocks needed for restart
- *
- * Some clocks need to be looked up in advance for the SoC restart
- * operation to work - see omap2xxx_restart(). Returns -EINVAL upon
- * error or 0 upon success.
- */
-static int __init omap2xxx_common_look_up_clks_for_reset(void)
-{
- reset_virt_prcm_set_ck = clk_get(NULL, "virt_prcm_set");
- if (IS_ERR(reset_virt_prcm_set_ck))
- return -EINVAL;
-
- reset_sys_ck = clk_get(NULL, "sys_ck");
- if (IS_ERR(reset_sys_ck))
- return -EINVAL;
-
- return 0;
-}
-omap_postcore_initcall(omap2xxx_common_look_up_clks_for_reset);
diff --git a/arch/arm/mach-omap2/omap24xx.h b/arch/arm/mach-omap2/omap24xx.h
deleted file mode 100644
index d9ecc0578292..000000000000
--- a/arch/arm/mach-omap2/omap24xx.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * This file contains the processor specific definitions
- * of the TI OMAP24XX.
- *
- * Copyright (C) 2007 Texas Instruments.
- * Copyright (C) 2007 Nokia Corporation.
- */
-
-#ifndef __ASM_ARCH_OMAP2_H
-#define __ASM_ARCH_OMAP2_H
-
-/*
- * Please place only base defines here and put the rest in device
- * specific headers. Note also that some of these defines are needed
- * for omap1 to compile without adding ifdefs.
- */
-
-#define L4_24XX_BASE 0x48000000
-#define L4_WK_243X_BASE 0x49000000
-#define L3_24XX_BASE 0x68000000
-
-/* interrupt controller */
-#define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000)
-#define OMAP24XX_IVA_INTC_BASE 0x40000000
-
-#define OMAP242X_CTRL_BASE L4_24XX_BASE
-#define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000)
-#define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000)
-#define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000)
-#define OMAP2420_PRM_BASE OMAP2420_CM_BASE
-#define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000)
-#define OMAP2420_SMS_BASE 0x68008000
-#define OMAP2420_GPMC_BASE 0x6800a000
-
-#define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000)
-#define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000)
-#define OMAP2430_CM_BASE (L4_WK_243X_BASE + 0x6000)
-#define OMAP2430_PRM_BASE OMAP2430_CM_BASE
-
-#define OMAP243X_SMS_BASE 0x6C000000
-#define OMAP243X_SDRC_BASE 0x6D000000
-#define OMAP243X_GPMC_BASE 0x6E000000
-#define OMAP243X_SCM_BASE (L4_WK_243X_BASE + 0x2000)
-#define OMAP243X_CTRL_BASE OMAP243X_SCM_BASE
-#define OMAP243X_HS_BASE (L4_24XX_BASE + 0x000ac000)
-
-/* DSP SS */
-#define OMAP2420_DSP_BASE 0x58000000
-#define OMAP2420_DSP_MEM_BASE (OMAP2420_DSP_BASE + 0x0)
-#define OMAP2420_DSP_IPI_BASE (OMAP2420_DSP_BASE + 0x1000000)
-#define OMAP2420_DSP_MMU_BASE (OMAP2420_DSP_BASE + 0x2000000)
-
-#define OMAP243X_DSP_BASE 0x5C000000
-#define OMAP243X_DSP_MEM_BASE (OMAP243X_DSP_BASE + 0x0)
-#define OMAP243X_DSP_MMU_BASE (OMAP243X_DSP_BASE + 0x1000000)
-
-/* Mailbox */
-#define OMAP24XX_MAILBOX_BASE (L4_24XX_BASE + 0x94000)
-
-/* Camera */
-#define OMAP24XX_CAMERA_BASE (L4_24XX_BASE + 0x52000)
-
-/* Security */
-#define OMAP24XX_SEC_BASE (L4_24XX_BASE + 0xA0000)
-#define OMAP24XX_SEC_RNG_BASE (OMAP24XX_SEC_BASE + 0x0000)
-#define OMAP24XX_SEC_DES_BASE (OMAP24XX_SEC_BASE + 0x2000)
-#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000)
-#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000)
-#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000)
-
-#endif /* __ASM_ARCH_OMAP2_H */
-
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 03cd523dff87..c918399ea735 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -153,9 +153,7 @@
#include "common.h"
#include "clockdomain.h"
#include "hdq1w.h"
-#include "mmc.h"
#include "powerdomain.h"
-#include "cm2xxx.h"
#include "cm3xxx.h"
#include "cm33xx.h"
#include "prm.h"
@@ -3469,10 +3467,6 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
return -ENOMEM;
}
-static const struct omap_hwmod_reset omap24xx_reset_quirks[] = {
- { .match = "msdi", .len = 4, .reset = omap_msdi_reset, },
-};
-
static const struct omap_hwmod_reset omap_reset_quirks[] = {
{ .match = "dss_core", .len = 8, .reset = omap_dss_reset, },
{ .match = "hdq1w", .len = 5, .reset = omap_hdq1w_reset, },
@@ -3503,11 +3497,6 @@ static void
omap_hwmod_init_reset_quirks(struct device *dev, struct omap_hwmod *oh,
const struct ti_sysc_module_data *data)
{
- if (soc_is_omap24xx())
- omap_hwmod_init_reset_quirk(dev, oh, data,
- omap24xx_reset_quirks,
- ARRAY_SIZE(omap24xx_reset_quirks));
-
omap_hwmod_init_reset_quirk(dev, oh, data, omap_reset_quirks,
ARRAY_SIZE(omap_reset_quirks));
}
@@ -3914,12 +3903,7 @@ int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state)
*/
void __init omap_hwmod_init(void)
{
- if (cpu_is_omap24xx()) {
- soc_ops.wait_target_ready = _omap2xxx_3xxx_wait_target_ready;
- soc_ops.assert_hardreset = _omap2_assert_hardreset;
- soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
- soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
- } else if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx()) {
soc_ops.wait_target_ready = _omap2xxx_3xxx_wait_target_ready;
soc_ops.assert_hardreset = _omap2_assert_hardreset;
soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index dcab7a01c10e..b60cd09c1997 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -663,8 +663,6 @@ omap_hwmod_for_each_by_class(const char *classname,
* Chip variant-specific hwmod init routines - XXX should be converted
* to use initcalls once the initial boot ordering is straightened out
*/
-extern int omap2420_hwmod_init(void);
-extern int omap2430_hwmod_init(void);
extern int omap3xxx_hwmod_init(void);
extern int dm814x_hwmod_init(void);
extern int dm816x_hwmod_init(void);
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
deleted file mode 100644
index dbd9dc9f0962..000000000000
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ /dev/null
@@ -1,402 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * omap_hwmod_2420_data.c - hardware modules present on the OMAP2420 chips
- *
- * Copyright (C) 2009-2011 Nokia Corporation
- * Copyright (C) 2012 Texas Instruments, Inc.
- * Paul Walmsley
- *
- * XXX handle crossbar/shared link difference for L3?
- * XXX these should be marked initdata for multi-OMAP kernels
- */
-
-#include <linux/platform_data/i2c-omap.h>
-
-#include "omap_hwmod.h"
-#include "l3_2xxx.h"
-#include "l4_2xxx.h"
-
-#include "omap_hwmod_common_data.h"
-
-#include "cm-regbits-24xx.h"
-#include "prm-regbits-24xx.h"
-#include "i2c.h"
-#include "mmc.h"
-#include "wd_timer.h"
-
-/*
- * OMAP2420 hardware module integration data
- *
- * All of the data in this section should be autogeneratable from the
- * TI hardware database or other technical documentation. Data that
- * is driver-specific or driver-kernel integration-specific belongs
- * elsewhere.
- */
-
-/*
- * IP blocks
- */
-
-/* IVA1 (IVA1) */
-static struct omap_hwmod_class iva1_hwmod_class = {
- .name = "iva1",
-};
-
-static struct omap_hwmod_rst_info omap2420_iva_resets[] = {
- { .name = "iva", .rst_shift = 8 },
-};
-
-static struct omap_hwmod omap2420_iva_hwmod = {
- .name = "iva",
- .class = &iva1_hwmod_class,
- .clkdm_name = "iva1_clkdm",
- .rst_lines = omap2420_iva_resets,
- .rst_lines_cnt = ARRAY_SIZE(omap2420_iva_resets),
- .main_clk = "iva1_ifck",
-};
-
-/* DSP */
-static struct omap_hwmod_class dsp_hwmod_class = {
- .name = "dsp",
-};
-
-static struct omap_hwmod_rst_info omap2420_dsp_resets[] = {
- { .name = "logic", .rst_shift = 0 },
- { .name = "mmu", .rst_shift = 1 },
-};
-
-static struct omap_hwmod omap2420_dsp_hwmod = {
- .name = "dsp",
- .class = &dsp_hwmod_class,
- .clkdm_name = "dsp_clkdm",
- .rst_lines = omap2420_dsp_resets,
- .rst_lines_cnt = ARRAY_SIZE(omap2420_dsp_resets),
- .main_clk = "dsp_fck",
-};
-
-/* I2C common */
-static struct omap_hwmod_class_sysconfig i2c_sysc = {
- .rev_offs = 0x00,
- .sysc_offs = 0x20,
- .syss_offs = 0x10,
- .sysc_flags = (SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class i2c_class = {
- .name = "i2c",
- .sysc = &i2c_sysc,
- .reset = &omap_i2c_reset,
-};
-
-/* I2C1 */
-static struct omap_hwmod omap2420_i2c1_hwmod = {
- .name = "i2c1",
- .main_clk = "i2c1_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP2420_ST_I2C1_SHIFT,
- },
- },
- .class = &i2c_class,
- /*
- * From mach-omap2/pm24xx.c: "Putting MPU into the WFI state
- * while a transfer is active seems to cause the I2C block to
- * timeout. Why? Good question."
- */
- .flags = (HWMOD_16BIT_REG | HWMOD_BLOCK_WFI),
-};
-
-/* I2C2 */
-static struct omap_hwmod omap2420_i2c2_hwmod = {
- .name = "i2c2",
- .main_clk = "i2c2_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP2420_ST_I2C2_SHIFT,
- },
- },
- .class = &i2c_class,
- .flags = HWMOD_16BIT_REG,
-};
-
-/* mailbox */
-static struct omap_hwmod omap2420_mailbox_hwmod = {
- .name = "mailbox",
- .class = &omap2xxx_mailbox_hwmod_class,
- .main_clk = "mailboxes_ick",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
- },
- },
-};
-
-/*
- * 'mcbsp' class
- * multi channel buffered serial port controller
- */
-
-static struct omap_hwmod_class omap2420_mcbsp_hwmod_class = {
- .name = "mcbsp",
-};
-
-static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
- { .role = "pad_fck", .clk = "mcbsp_clks" },
- { .role = "prcm_fck", .clk = "func_96m_ck" },
-};
-
-/* mcbsp1 */
-static struct omap_hwmod omap2420_mcbsp1_hwmod = {
- .name = "mcbsp1",
- .class = &omap2420_mcbsp_hwmod_class,
- .main_clk = "mcbsp1_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT,
- },
- },
- .opt_clks = mcbsp_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
-};
-
-/* mcbsp2 */
-static struct omap_hwmod omap2420_mcbsp2_hwmod = {
- .name = "mcbsp2",
- .class = &omap2420_mcbsp_hwmod_class,
- .main_clk = "mcbsp2_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT,
- },
- },
- .opt_clks = mcbsp_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
-};
-
-static struct omap_hwmod_class_sysconfig omap2420_msdi_sysc = {
- .rev_offs = 0x3c,
- .sysc_offs = 0x64,
- .syss_offs = 0x68,
- .sysc_flags = (SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap2420_msdi_hwmod_class = {
- .name = "msdi",
- .sysc = &omap2420_msdi_sysc,
- .reset = &omap_msdi_reset,
-};
-
-/* msdi1 */
-static struct omap_hwmod omap2420_msdi1_hwmod = {
- .name = "msdi1",
- .class = &omap2420_msdi_hwmod_class,
- .main_clk = "mmc_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP2420_ST_MMC_SHIFT,
- },
- },
- .flags = HWMOD_16BIT_REG,
-};
-
-/* HDQ1W/1-wire */
-static struct omap_hwmod omap2420_hdq1w_hwmod = {
- .name = "hdq1w",
- .main_clk = "hdq_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_HDQ_SHIFT,
- },
- },
- .class = &omap2_hdq1w_class,
-};
-
-/*
- * interfaces
- */
-
-/* L4 CORE -> I2C1 interface */
-static struct omap_hwmod_ocp_if omap2420_l4_core__i2c1 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2420_i2c1_hwmod,
- .clk = "i2c1_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> I2C2 interface */
-static struct omap_hwmod_ocp_if omap2420_l4_core__i2c2 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2420_i2c2_hwmod,
- .clk = "i2c2_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* IVA <- L3 interface */
-static struct omap_hwmod_ocp_if omap2420_l3__iva = {
- .master = &omap2xxx_l3_main_hwmod,
- .slave = &omap2420_iva_hwmod,
- .clk = "core_l3_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* DSP <- L3 interface */
-static struct omap_hwmod_ocp_if omap2420_l3__dsp = {
- .master = &omap2xxx_l3_main_hwmod,
- .slave = &omap2420_dsp_hwmod,
- .clk = "dsp_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> wd_timer2 */
-static struct omap_hwmod_ocp_if omap2420_l4_wkup__wd_timer2 = {
- .master = &omap2xxx_l4_wkup_hwmod,
- .slave = &omap2xxx_wd_timer2_hwmod,
- .clk = "mpu_wdt_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio1 */
-static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio1 = {
- .master = &omap2xxx_l4_wkup_hwmod,
- .slave = &omap2xxx_gpio1_hwmod,
- .clk = "gpios_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio2 */
-static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio2 = {
- .master = &omap2xxx_l4_wkup_hwmod,
- .slave = &omap2xxx_gpio2_hwmod,
- .clk = "gpios_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio3 */
-static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio3 = {
- .master = &omap2xxx_l4_wkup_hwmod,
- .slave = &omap2xxx_gpio3_hwmod,
- .clk = "gpios_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio4 */
-static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio4 = {
- .master = &omap2xxx_l4_wkup_hwmod,
- .slave = &omap2xxx_gpio4_hwmod,
- .clk = "gpios_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> mailbox */
-static struct omap_hwmod_ocp_if omap2420_l4_core__mailbox = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2420_mailbox_hwmod,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> mcbsp1 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp1 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2420_mcbsp1_hwmod,
- .clk = "mcbsp1_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> mcbsp2 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp2 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2420_mcbsp2_hwmod,
- .clk = "mcbsp2_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> msdi1 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__msdi1 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2420_msdi1_hwmod,
- .clk = "mmc_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> hdq1w interface */
-static struct omap_hwmod_ocp_if omap2420_l4_core__hdq1w = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2420_hdq1w_hwmod,
- .clk = "hdq_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
- .flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
-};
-
-static struct omap_hwmod_ocp_if omap2420_l3__gpmc = {
- .master = &omap2xxx_l3_main_hwmod,
- .slave = &omap2xxx_gpmc_hwmod,
- .clk = "core_l3_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = {
- &omap2xxx_l3_main__l4_core,
- &omap2xxx_mpu__l3_main,
- &omap2xxx_dss__l3,
- &omap2xxx_l4_core__mcspi1,
- &omap2xxx_l4_core__mcspi2,
- &omap2xxx_l4_core__l4_wkup,
- &omap2_l4_core__uart1,
- &omap2_l4_core__uart2,
- &omap2_l4_core__uart3,
- &omap2420_l4_core__i2c1,
- &omap2420_l4_core__i2c2,
- &omap2420_l3__iva,
- &omap2420_l3__dsp,
- &omap2xxx_l4_core__timer3,
- &omap2xxx_l4_core__timer4,
- &omap2xxx_l4_core__timer5,
- &omap2xxx_l4_core__timer6,
- &omap2xxx_l4_core__timer7,
- &omap2xxx_l4_core__timer8,
- &omap2xxx_l4_core__timer9,
- &omap2xxx_l4_core__timer10,
- &omap2xxx_l4_core__timer11,
- &omap2xxx_l4_core__timer12,
- &omap2420_l4_wkup__wd_timer2,
- &omap2xxx_l4_core__dss,
- &omap2xxx_l4_core__dss_dispc,
- &omap2xxx_l4_core__dss_rfbi,
- &omap2xxx_l4_core__dss_venc,
- &omap2420_l4_wkup__gpio1,
- &omap2420_l4_wkup__gpio2,
- &omap2420_l4_wkup__gpio3,
- &omap2420_l4_wkup__gpio4,
- &omap2420_l4_core__mailbox,
- &omap2420_l4_core__mcbsp1,
- &omap2420_l4_core__mcbsp2,
- &omap2420_l4_core__msdi1,
- &omap2xxx_l4_core__rng,
- &omap2xxx_l4_core__sham,
- &omap2xxx_l4_core__aes,
- &omap2420_l4_core__hdq1w,
- &omap2420_l3__gpmc,
- NULL,
-};
-
-int __init omap2420_hwmod_init(void)
-{
- omap_hwmod_init();
- return omap_hwmod_register_links(omap2420_hwmod_ocp_ifs);
-}
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
deleted file mode 100644
index c93200801b34..000000000000
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ /dev/null
@@ -1,606 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * omap_hwmod_2430_data.c - hardware modules present on the OMAP2430 chips
- *
- * Copyright (C) 2009-2011 Nokia Corporation
- * Copyright (C) 2012 Texas Instruments, Inc.
- * Paul Walmsley
- *
- * XXX handle crossbar/shared link difference for L3?
- * XXX these should be marked initdata for multi-OMAP kernels
- */
-
-#include <linux/platform_data/i2c-omap.h>
-#include <linux/platform_data/hsmmc-omap.h>
-
-#include "omap_hwmod.h"
-#include "l3_2xxx.h"
-
-#include "soc.h"
-#include "omap_hwmod_common_data.h"
-#include "prm-regbits-24xx.h"
-#include "cm-regbits-24xx.h"
-#include "i2c.h"
-#include "wd_timer.h"
-
-/*
- * OMAP2430 hardware module integration data
- *
- * All of the data in this section should be autogeneratable from the
- * TI hardware database or other technical documentation. Data that
- * is driver-specific or driver-kernel integration-specific belongs
- * elsewhere.
- */
-
-/*
- * IP blocks
- */
-
-/* IVA2 (IVA2) */
-static struct omap_hwmod_rst_info omap2430_iva_resets[] = {
- { .name = "logic", .rst_shift = 0 },
- { .name = "mmu", .rst_shift = 1 },
-};
-
-static struct omap_hwmod omap2430_iva_hwmod = {
- .name = "iva",
- .class = &iva_hwmod_class,
- .clkdm_name = "dsp_clkdm",
- .rst_lines = omap2430_iva_resets,
- .rst_lines_cnt = ARRAY_SIZE(omap2430_iva_resets),
- .main_clk = "dsp_fck",
-};
-
-/* I2C common */
-static struct omap_hwmod_class_sysconfig i2c_sysc = {
- .rev_offs = 0x00,
- .sysc_offs = 0x20,
- .syss_offs = 0x10,
- .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
- SYSS_HAS_RESET_STATUS),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class i2c_class = {
- .name = "i2c",
- .sysc = &i2c_sysc,
- .reset = &omap_i2c_reset,
-};
-
-/* I2C1 */
-static struct omap_hwmod omap2430_i2c1_hwmod = {
- .name = "i2c1",
- .flags = HWMOD_16BIT_REG,
- .main_clk = "i2chs1_fck",
- .prcm = {
- .omap2 = {
- /*
- * NOTE: The CM_FCLKEN* and CM_ICLKEN* for
- * I2CHS IP's do not follow the usual pattern.
- * prcm_reg_id alone cannot be used to program
- * the iclk and fclk. Needs to be handled using
- * additional flags when clk handling is moved
- * to hwmod framework.
- */
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP2430_ST_I2CHS1_SHIFT,
- },
- },
- .class = &i2c_class,
-};
-
-/* I2C2 */
-static struct omap_hwmod omap2430_i2c2_hwmod = {
- .name = "i2c2",
- .flags = HWMOD_16BIT_REG,
- .main_clk = "i2chs2_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP2430_ST_I2CHS2_SHIFT,
- },
- },
- .class = &i2c_class,
-};
-
-/* gpio5 */
-static struct omap_hwmod omap2430_gpio5_hwmod = {
- .name = "gpio5",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .main_clk = "gpio5_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 2,
- .idlest_idle_bit = OMAP2430_ST_GPIO5_SHIFT,
- },
- },
- .class = &omap2xxx_gpio_hwmod_class,
-};
-
-/* mailbox */
-static struct omap_hwmod omap2430_mailbox_hwmod = {
- .name = "mailbox",
- .class = &omap2xxx_mailbox_hwmod_class,
- .main_clk = "mailboxes_ick",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
- },
- },
-};
-
-/* mcspi3 */
-static struct omap_hwmod omap2430_mcspi3_hwmod = {
- .name = "mcspi3",
- .main_clk = "mcspi3_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 2,
- .idlest_idle_bit = OMAP2430_ST_MCSPI3_SHIFT,
- },
- },
- .class = &omap2xxx_mcspi_class,
-};
-
-/* usbhsotg */
-static struct omap_hwmod_class_sysconfig omap2430_usbhsotg_sysc = {
- .rev_offs = 0x0400,
- .sysc_offs = 0x0404,
- .syss_offs = 0x0408,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE|
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
- SYSC_HAS_AUTOIDLE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class usbotg_class = {
- .name = "usbotg",
- .sysc = &omap2430_usbhsotg_sysc,
-};
-
-/* usb_otg_hs */
-static struct omap_hwmod omap2430_usbhsotg_hwmod = {
- .name = "usb_otg_hs",
- .main_clk = "usbhs_ick",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP2430_ST_USBHS_SHIFT,
- },
- },
- .class = &usbotg_class,
- /*
- * Erratum ID: i479 idle_req / idle_ack mechanism potentially
- * broken when autoidle is enabled
- * workaround is to disable the autoidle bit at module level.
- */
- .flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
- | HWMOD_SWSUP_MSTANDBY,
-};
-
-/*
- * 'mcbsp' class
- * multi channel buffered serial port controller
- */
-
-static struct omap_hwmod_class_sysconfig omap2430_mcbsp_sysc = {
- .rev_offs = 0x007C,
- .sysc_offs = 0x008C,
- .sysc_flags = (SYSC_HAS_SOFTRESET),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap2430_mcbsp_hwmod_class = {
- .name = "mcbsp",
- .sysc = &omap2430_mcbsp_sysc,
-};
-
-static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
- { .role = "pad_fck", .clk = "mcbsp_clks" },
- { .role = "prcm_fck", .clk = "func_96m_ck" },
-};
-
-/* mcbsp1 */
-static struct omap_hwmod omap2430_mcbsp1_hwmod = {
- .name = "mcbsp1",
- .class = &omap2430_mcbsp_hwmod_class,
- .main_clk = "mcbsp1_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT,
- },
- },
- .opt_clks = mcbsp_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
-};
-
-/* mcbsp2 */
-static struct omap_hwmod omap2430_mcbsp2_hwmod = {
- .name = "mcbsp2",
- .class = &omap2430_mcbsp_hwmod_class,
- .main_clk = "mcbsp2_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT,
- },
- },
- .opt_clks = mcbsp_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
-};
-
-/* mcbsp3 */
-static struct omap_hwmod omap2430_mcbsp3_hwmod = {
- .name = "mcbsp3",
- .class = &omap2430_mcbsp_hwmod_class,
- .main_clk = "mcbsp3_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 2,
- .idlest_idle_bit = OMAP2430_ST_MCBSP3_SHIFT,
- },
- },
- .opt_clks = mcbsp_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
-};
-
-/* mcbsp4 */
-static struct omap_hwmod omap2430_mcbsp4_hwmod = {
- .name = "mcbsp4",
- .class = &omap2430_mcbsp_hwmod_class,
- .main_clk = "mcbsp4_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 2,
- .idlest_idle_bit = OMAP2430_ST_MCBSP4_SHIFT,
- },
- },
- .opt_clks = mcbsp_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
-};
-
-/* mcbsp5 */
-static struct omap_hwmod omap2430_mcbsp5_hwmod = {
- .name = "mcbsp5",
- .class = &omap2430_mcbsp_hwmod_class,
- .main_clk = "mcbsp5_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 2,
- .idlest_idle_bit = OMAP2430_ST_MCBSP5_SHIFT,
- },
- },
- .opt_clks = mcbsp_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
-};
-
-/* MMC/SD/SDIO common */
-static struct omap_hwmod_class_sysconfig omap2430_mmc_sysc = {
- .rev_offs = 0x1fc,
- .sysc_offs = 0x10,
- .syss_offs = 0x14,
- .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
- SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap2430_mmc_class = {
- .name = "mmc",
- .sysc = &omap2430_mmc_sysc,
-};
-
-/* MMC/SD/SDIO1 */
-static struct omap_hwmod_opt_clk omap2430_mmc1_opt_clks[] = {
- { .role = "dbck", .clk = "mmchsdb1_fck" },
-};
-
-static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
- .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
-};
-
-static struct omap_hwmod omap2430_mmc1_hwmod = {
- .name = "mmc1",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .opt_clks = omap2430_mmc1_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(omap2430_mmc1_opt_clks),
- .main_clk = "mmchs1_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 2,
- .idlest_idle_bit = OMAP2430_ST_MMCHS1_SHIFT,
- },
- },
- .dev_attr = &mmc1_dev_attr,
- .class = &omap2430_mmc_class,
-};
-
-/* MMC/SD/SDIO2 */
-static struct omap_hwmod_opt_clk omap2430_mmc2_opt_clks[] = {
- { .role = "dbck", .clk = "mmchsdb2_fck" },
-};
-
-static struct omap_hwmod omap2430_mmc2_hwmod = {
- .name = "mmc2",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .opt_clks = omap2430_mmc2_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(omap2430_mmc2_opt_clks),
- .main_clk = "mmchs2_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 2,
- .idlest_idle_bit = OMAP2430_ST_MMCHS2_SHIFT,
- },
- },
- .class = &omap2430_mmc_class,
-};
-
-/* HDQ1W/1-wire */
-static struct omap_hwmod omap2430_hdq1w_hwmod = {
- .name = "hdq1w",
- .main_clk = "hdq_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_HDQ_SHIFT,
- },
- },
- .class = &omap2_hdq1w_class,
-};
-
-/*
- * interfaces
- */
-
-/* L3 -> L4_CORE interface */
-/* l3_core -> usbhsotg interface */
-static struct omap_hwmod_ocp_if omap2430_usbhsotg__l3 = {
- .master = &omap2430_usbhsotg_hwmod,
- .slave = &omap2xxx_l3_main_hwmod,
- .clk = "core_l3_ck",
- .user = OCP_USER_MPU,
-};
-
-/* L4 CORE -> I2C1 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__i2c1 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2430_i2c1_hwmod,
- .clk = "i2c1_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> I2C2 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__i2c2 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2430_i2c2_hwmod,
- .clk = "i2c2_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core ->usbhsotg interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__usbhsotg = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2430_usbhsotg_hwmod,
- .clk = "usb_l4_ick",
- .user = OCP_USER_MPU,
-};
-
-/* L4 CORE -> MMC1 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mmc1 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2430_mmc1_hwmod,
- .clk = "mmchs1_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> MMC2 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mmc2 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2430_mmc2_hwmod,
- .clk = "mmchs2_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 core -> mcspi3 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi3 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2430_mcspi3_hwmod,
- .clk = "mcspi3_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* IVA2 <- L3 interface */
-static struct omap_hwmod_ocp_if omap2430_l3__iva = {
- .master = &omap2xxx_l3_main_hwmod,
- .slave = &omap2430_iva_hwmod,
- .clk = "core_l3_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> wd_timer2 */
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__wd_timer2 = {
- .master = &omap2xxx_l4_wkup_hwmod,
- .slave = &omap2xxx_wd_timer2_hwmod,
- .clk = "mpu_wdt_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio1 */
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio1 = {
- .master = &omap2xxx_l4_wkup_hwmod,
- .slave = &omap2xxx_gpio1_hwmod,
- .clk = "gpios_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio2 */
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio2 = {
- .master = &omap2xxx_l4_wkup_hwmod,
- .slave = &omap2xxx_gpio2_hwmod,
- .clk = "gpios_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio3 */
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio3 = {
- .master = &omap2xxx_l4_wkup_hwmod,
- .slave = &omap2xxx_gpio3_hwmod,
- .clk = "gpios_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio4 */
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio4 = {
- .master = &omap2xxx_l4_wkup_hwmod,
- .slave = &omap2xxx_gpio4_hwmod,
- .clk = "gpios_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> gpio5 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2430_gpio5_hwmod,
- .clk = "gpio5_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> mailbox */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mailbox = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2430_mailbox_hwmod,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> mcbsp1 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp1 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2430_mcbsp1_hwmod,
- .clk = "mcbsp1_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> mcbsp2 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp2 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2430_mcbsp2_hwmod,
- .clk = "mcbsp2_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> mcbsp3 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp3 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2430_mcbsp3_hwmod,
- .clk = "mcbsp3_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> mcbsp4 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp4 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2430_mcbsp4_hwmod,
- .clk = "mcbsp4_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> mcbsp5 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp5 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2430_mcbsp5_hwmod,
- .clk = "mcbsp5_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> hdq1w */
-static struct omap_hwmod_ocp_if omap2430_l4_core__hdq1w = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2430_hdq1w_hwmod,
- .clk = "hdq_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
- .flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
-};
-
-static struct omap_hwmod_ocp_if omap2430_l3__gpmc = {
- .master = &omap2xxx_l3_main_hwmod,
- .slave = &omap2xxx_gpmc_hwmod,
- .clk = "core_l3_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = {
- &omap2xxx_l3_main__l4_core,
- &omap2xxx_mpu__l3_main,
- &omap2xxx_dss__l3,
- &omap2430_usbhsotg__l3,
- &omap2430_l4_core__i2c1,
- &omap2430_l4_core__i2c2,
- &omap2xxx_l4_core__l4_wkup,
- &omap2_l4_core__uart1,
- &omap2_l4_core__uart2,
- &omap2_l4_core__uart3,
- &omap2430_l4_core__usbhsotg,
- &omap2430_l4_core__mmc1,
- &omap2430_l4_core__mmc2,
- &omap2xxx_l4_core__mcspi1,
- &omap2xxx_l4_core__mcspi2,
- &omap2430_l4_core__mcspi3,
- &omap2430_l3__iva,
- &omap2xxx_l4_core__timer3,
- &omap2xxx_l4_core__timer4,
- &omap2xxx_l4_core__timer5,
- &omap2xxx_l4_core__timer6,
- &omap2xxx_l4_core__timer7,
- &omap2xxx_l4_core__timer8,
- &omap2xxx_l4_core__timer9,
- &omap2xxx_l4_core__timer10,
- &omap2xxx_l4_core__timer11,
- &omap2xxx_l4_core__timer12,
- &omap2430_l4_wkup__wd_timer2,
- &omap2xxx_l4_core__dss,
- &omap2xxx_l4_core__dss_dispc,
- &omap2xxx_l4_core__dss_rfbi,
- &omap2xxx_l4_core__dss_venc,
- &omap2430_l4_wkup__gpio1,
- &omap2430_l4_wkup__gpio2,
- &omap2430_l4_wkup__gpio3,
- &omap2430_l4_wkup__gpio4,
- &omap2430_l4_core__gpio5,
- &omap2430_l4_core__mailbox,
- &omap2430_l4_core__mcbsp1,
- &omap2430_l4_core__mcbsp2,
- &omap2430_l4_core__mcbsp3,
- &omap2430_l4_core__mcbsp4,
- &omap2430_l4_core__mcbsp5,
- &omap2430_l4_core__hdq1w,
- &omap2xxx_l4_core__rng,
- &omap2xxx_l4_core__sham,
- &omap2xxx_l4_core__aes,
- &omap2430_l3__gpmc,
- NULL,
-};
-
-int __init omap2430_hwmod_init(void)
-{
- omap_hwmod_init();
- return omap_hwmod_register_links(omap2430_hwmod_ocp_ifs);
-}
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
deleted file mode 100644
index 761d34914ed9..000000000000
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
+++ /dev/null
@@ -1,256 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * omap_hwmod_2xxx_interconnect_data.c - common interconnect data for OMAP2xxx
- *
- * Copyright (C) 2009-2011 Nokia Corporation
- * Paul Walmsley
- *
- * XXX handle crossbar/shared link difference for L3?
- * XXX these should be marked initdata for multi-OMAP kernels
- */
-#include <linux/sizes.h>
-
-#include "omap_hwmod.h"
-#include "l3_2xxx.h"
-#include "l4_2xxx.h"
-
-#include "omap_hwmod_common_data.h"
-
-/*
- * Common interconnect data
- */
-
-/* L3 -> L4_CORE interface */
-struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core = {
- .master = &omap2xxx_l3_main_hwmod,
- .slave = &omap2xxx_l4_core_hwmod,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* MPU -> L3 interface */
-struct omap_hwmod_ocp_if omap2xxx_mpu__l3_main = {
- .master = &omap2xxx_mpu_hwmod,
- .slave = &omap2xxx_l3_main_hwmod,
- .user = OCP_USER_MPU,
-};
-
-/* DSS -> l3 */
-struct omap_hwmod_ocp_if omap2xxx_dss__l3 = {
- .master = &omap2xxx_dss_core_hwmod,
- .slave = &omap2xxx_l3_main_hwmod,
- .fw = {
- .omap2 = {
- .l3_perm_bit = OMAP2_L3_CORE_FW_CONNID_DSS,
- .flags = OMAP_FIREWALL_L3,
- },
- },
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4_CORE -> L4_WKUP interface */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__l4_wkup = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_l4_wkup_hwmod,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> UART1 interface */
-struct omap_hwmod_ocp_if omap2_l4_core__uart1 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_uart1_hwmod,
- .clk = "uart1_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> UART2 interface */
-struct omap_hwmod_ocp_if omap2_l4_core__uart2 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_uart2_hwmod,
- .clk = "uart2_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 PER -> UART3 interface */
-struct omap_hwmod_ocp_if omap2_l4_core__uart3 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_uart3_hwmod,
- .clk = "uart3_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 core -> mcspi1 interface */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi1 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_mcspi1_hwmod,
- .clk = "mcspi1_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 core -> mcspi2 interface */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi2 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_mcspi2_hwmod,
- .clk = "mcspi2_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> timer3 */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__timer3 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_timer3_hwmod,
- .clk = "gpt3_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> timer4 */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__timer4 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_timer4_hwmod,
- .clk = "gpt4_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> timer5 */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__timer5 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_timer5_hwmod,
- .clk = "gpt5_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> timer6 */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__timer6 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_timer6_hwmod,
- .clk = "gpt6_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> timer7 */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__timer7 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_timer7_hwmod,
- .clk = "gpt7_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> timer8 */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__timer8 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_timer8_hwmod,
- .clk = "gpt8_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> timer9 */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__timer9 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_timer9_hwmod,
- .clk = "gpt9_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> timer10 */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__timer10 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_timer10_hwmod,
- .clk = "gpt10_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> timer11 */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__timer11 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_timer11_hwmod,
- .clk = "gpt11_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> timer12 */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__timer12 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_timer12_hwmod,
- .clk = "gpt12_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> dss */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__dss = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_dss_core_hwmod,
- .clk = "dss_ick",
- .fw = {
- .omap2 = {
- .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
- .flags = OMAP_FIREWALL_L4,
- },
- },
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> dss_dispc */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_dss_dispc_hwmod,
- .clk = "dss_ick",
- .fw = {
- .omap2 = {
- .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_DISPC_REGION,
- .flags = OMAP_FIREWALL_L4,
- },
- },
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> dss_rfbi */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_dss_rfbi_hwmod,
- .clk = "dss_ick",
- .fw = {
- .omap2 = {
- .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
- .flags = OMAP_FIREWALL_L4,
- },
- },
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> dss_venc */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_dss_venc_hwmod,
- .clk = "dss_ick",
- .fw = {
- .omap2 = {
- .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_VENC_REGION,
- .flags = OMAP_FIREWALL_L4,
- },
- },
- .flags = OCPIF_SWSUP_IDLE,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> rng */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__rng = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_rng_hwmod,
- .clk = "rng_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 core -> sham interface */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__sham = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_sham_hwmod,
- .clk = "sha_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 core -> aes interface */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__aes = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_aes_hwmod,
- .clk = "aes_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
deleted file mode 100644
index 4982e04ead53..000000000000
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ /dev/null
@@ -1,668 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * omap_hwmod_2xxx_ipblock_data.c - common IP block data for OMAP2xxx
- *
- * Copyright (C) 2011 Nokia Corporation
- * Paul Walmsley
- */
-
-#include <linux/types.h>
-
-#include "omap_hwmod.h"
-#include "omap_hwmod_common_data.h"
-#include "cm-regbits-24xx.h"
-#include "prm-regbits-24xx.h"
-#include "wd_timer.h"
-
-/*
- * 'dispc' class
- * display controller
- */
-
-static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap2_dispc_hwmod_class = {
- .name = "dispc",
- .sysc = &omap2_dispc_sysc,
-};
-
-/* OMAP2xxx Timer Common */
-static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
- SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap2xxx_timer_hwmod_class = {
- .name = "timer",
- .sysc = &omap2xxx_timer_sysc,
-};
-
-/*
- * 'wd_timer' class
- * 32-bit watchdog upward counter that generates a pulse on the reset pin on
- * overflow condition
- */
-
-static struct omap_hwmod_class_sysconfig omap2xxx_wd_timer_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SOFTRESET |
- SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class = {
- .name = "wd_timer",
- .sysc = &omap2xxx_wd_timer_sysc,
- .pre_shutdown = &omap2_wd_timer_disable,
- .reset = &omap2_wd_timer_reset,
-};
-
-/*
- * 'gpio' class
- * general purpose io module
- */
-static struct omap_hwmod_class_sysconfig omap2xxx_gpio_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
- SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2xxx_gpio_hwmod_class = {
- .name = "gpio",
- .sysc = &omap2xxx_gpio_sysc,
-};
-
-/*
- * 'mailbox' class
- * mailbox module allowing communication between the on-chip processors
- * using a queued mailbox-interrupt mechanism.
- */
-
-static struct omap_hwmod_class_sysconfig omap2xxx_mailbox_sysc = {
- .rev_offs = 0x000,
- .sysc_offs = 0x010,
- .syss_offs = 0x014,
- .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2xxx_mailbox_hwmod_class = {
- .name = "mailbox",
- .sysc = &omap2xxx_mailbox_sysc,
-};
-
-/*
- * 'mcspi' class
- * multichannel serial port interface (mcspi) / master/slave synchronous serial
- * bus
- */
-
-static struct omap_hwmod_class_sysconfig omap2xxx_mcspi_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
- SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2xxx_mcspi_class = {
- .name = "mcspi",
- .sysc = &omap2xxx_mcspi_sysc,
-};
-
-/*
- * 'gpmc' class
- * general purpose memory controller
- */
-
-static struct omap_hwmod_class_sysconfig omap2xxx_gpmc_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap2xxx_gpmc_hwmod_class = {
- .name = "gpmc",
- .sysc = &omap2xxx_gpmc_sysc,
-};
-
-/*
- * IP blocks
- */
-
-/* L3 */
-struct omap_hwmod omap2xxx_l3_main_hwmod = {
- .name = "l3_main",
- .class = &l3_hwmod_class,
- .flags = HWMOD_NO_IDLEST,
-};
-
-/* L4 CORE */
-struct omap_hwmod omap2xxx_l4_core_hwmod = {
- .name = "l4_core",
- .class = &l4_hwmod_class,
- .flags = HWMOD_NO_IDLEST,
-};
-
-/* L4 WKUP */
-struct omap_hwmod omap2xxx_l4_wkup_hwmod = {
- .name = "l4_wkup",
- .class = &l4_hwmod_class,
- .flags = HWMOD_NO_IDLEST,
-};
-
-/* MPU */
-struct omap_hwmod omap2xxx_mpu_hwmod = {
- .name = "mpu",
- .class = &mpu_hwmod_class,
- .main_clk = "mpu_ck",
-};
-
-/* timer3 */
-struct omap_hwmod omap2xxx_timer3_hwmod = {
- .name = "timer3",
- .main_clk = "gpt3_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
- },
- },
- .class = &omap2xxx_timer_hwmod_class,
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
-};
-
-/* timer4 */
-struct omap_hwmod omap2xxx_timer4_hwmod = {
- .name = "timer4",
- .main_clk = "gpt4_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
- },
- },
- .class = &omap2xxx_timer_hwmod_class,
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
-};
-
-/* timer5 */
-struct omap_hwmod omap2xxx_timer5_hwmod = {
- .name = "timer5",
- .main_clk = "gpt5_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
- },
- },
- .class = &omap2xxx_timer_hwmod_class,
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
-};
-
-/* timer6 */
-struct omap_hwmod omap2xxx_timer6_hwmod = {
- .name = "timer6",
- .main_clk = "gpt6_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
- },
- },
- .class = &omap2xxx_timer_hwmod_class,
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
-};
-
-/* timer7 */
-struct omap_hwmod omap2xxx_timer7_hwmod = {
- .name = "timer7",
- .main_clk = "gpt7_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
- },
- },
- .class = &omap2xxx_timer_hwmod_class,
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
-};
-
-/* timer8 */
-struct omap_hwmod omap2xxx_timer8_hwmod = {
- .name = "timer8",
- .main_clk = "gpt8_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
- },
- },
- .class = &omap2xxx_timer_hwmod_class,
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
-};
-
-/* timer9 */
-struct omap_hwmod omap2xxx_timer9_hwmod = {
- .name = "timer9",
- .main_clk = "gpt9_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
- },
- },
- .class = &omap2xxx_timer_hwmod_class,
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
-};
-
-/* timer10 */
-struct omap_hwmod omap2xxx_timer10_hwmod = {
- .name = "timer10",
- .main_clk = "gpt10_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
- },
- },
- .class = &omap2xxx_timer_hwmod_class,
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
-};
-
-/* timer11 */
-struct omap_hwmod omap2xxx_timer11_hwmod = {
- .name = "timer11",
- .main_clk = "gpt11_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
- },
- },
- .class = &omap2xxx_timer_hwmod_class,
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
-};
-
-/* timer12 */
-struct omap_hwmod omap2xxx_timer12_hwmod = {
- .name = "timer12",
- .main_clk = "gpt12_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
- },
- },
- .class = &omap2xxx_timer_hwmod_class,
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
-};
-
-/* wd_timer2 */
-struct omap_hwmod omap2xxx_wd_timer2_hwmod = {
- .name = "wd_timer2",
- .class = &omap2xxx_wd_timer_hwmod_class,
- .main_clk = "mpu_wdt_fck",
- .prcm = {
- .omap2 = {
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT,
- },
- },
-};
-
-/* UART1 */
-
-struct omap_hwmod omap2xxx_uart1_hwmod = {
- .name = "uart1",
- .main_clk = "uart1_fck",
- .flags = DEBUG_OMAP2UART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT,
- },
- },
- .class = &omap2_uart_class,
-};
-
-/* UART2 */
-
-struct omap_hwmod omap2xxx_uart2_hwmod = {
- .name = "uart2",
- .main_clk = "uart2_fck",
- .flags = DEBUG_OMAP2UART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT,
- },
- },
- .class = &omap2_uart_class,
-};
-
-/* UART3 */
-
-struct omap_hwmod omap2xxx_uart3_hwmod = {
- .name = "uart3",
- .main_clk = "uart3_fck",
- .flags = DEBUG_OMAP2UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 2,
- .idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT,
- },
- },
- .class = &omap2_uart_class,
-};
-
-/* dss */
-
-static struct omap_hwmod_opt_clk dss_opt_clks[] = {
- /*
- * The DSS HW needs all DSS clocks enabled during reset. The dss_core
- * driver does not use these clocks.
- */
- { .role = "tv_clk", .clk = "dss_54m_fck" },
- { .role = "sys_clk", .clk = "dss2_fck" },
-};
-
-struct omap_hwmod omap2xxx_dss_core_hwmod = {
- .name = "dss_core",
- .class = &omap2_dss_hwmod_class,
- .main_clk = "dss1_fck", /* instead of dss_fck */
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- },
- },
- .opt_clks = dss_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
- .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-};
-
-struct omap_hwmod omap2xxx_dss_dispc_hwmod = {
- .name = "dss_dispc",
- .class = &omap2_dispc_hwmod_class,
- .main_clk = "dss1_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- },
- },
- .flags = HWMOD_NO_IDLEST,
- .dev_attr = &omap2_3_dss_dispc_dev_attr,
-};
-
-static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
- { .role = "ick", .clk = "dss_ick" },
-};
-
-struct omap_hwmod omap2xxx_dss_rfbi_hwmod = {
- .name = "dss_rfbi",
- .class = &omap2_rfbi_hwmod_class,
- .main_clk = "dss1_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- },
- },
- .opt_clks = dss_rfbi_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
- .flags = HWMOD_NO_IDLEST,
-};
-
-struct omap_hwmod omap2xxx_dss_venc_hwmod = {
- .name = "dss_venc",
- .class = &omap2_venc_hwmod_class,
- .main_clk = "dss_54m_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- },
- },
- .flags = HWMOD_NO_IDLEST,
-};
-
-/* gpio1 */
-struct omap_hwmod omap2xxx_gpio1_hwmod = {
- .name = "gpio1",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .main_clk = "gpios_fck",
- .prcm = {
- .omap2 = {
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
- },
- },
- .class = &omap2xxx_gpio_hwmod_class,
-};
-
-/* gpio2 */
-struct omap_hwmod omap2xxx_gpio2_hwmod = {
- .name = "gpio2",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .main_clk = "gpios_fck",
- .prcm = {
- .omap2 = {
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
- },
- },
- .class = &omap2xxx_gpio_hwmod_class,
-};
-
-/* gpio3 */
-struct omap_hwmod omap2xxx_gpio3_hwmod = {
- .name = "gpio3",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .main_clk = "gpios_fck",
- .prcm = {
- .omap2 = {
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
- },
- },
- .class = &omap2xxx_gpio_hwmod_class,
-};
-
-/* gpio4 */
-struct omap_hwmod omap2xxx_gpio4_hwmod = {
- .name = "gpio4",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .main_clk = "gpios_fck",
- .prcm = {
- .omap2 = {
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
- },
- },
- .class = &omap2xxx_gpio_hwmod_class,
-};
-
-/* mcspi1 */
-struct omap_hwmod omap2xxx_mcspi1_hwmod = {
- .name = "mcspi1",
- .main_clk = "mcspi1_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MCSPI1_SHIFT,
- },
- },
- .class = &omap2xxx_mcspi_class,
-};
-
-/* mcspi2 */
-struct omap_hwmod omap2xxx_mcspi2_hwmod = {
- .name = "mcspi2",
- .main_clk = "mcspi2_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MCSPI2_SHIFT,
- },
- },
- .class = &omap2xxx_mcspi_class,
-};
-
-/* gpmc */
-struct omap_hwmod omap2xxx_gpmc_hwmod = {
- .name = "gpmc",
- .class = &omap2xxx_gpmc_hwmod_class,
- .main_clk = "gpmc_fck",
- /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
- .flags = HWMOD_NO_IDLEST | DEBUG_OMAP_GPMC_HWMOD_FLAGS,
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- },
- },
-};
-
-/* RNG */
-
-static struct omap_hwmod_class_sysconfig omap2_rng_sysc = {
- .rev_offs = 0x3c,
- .sysc_offs = 0x40,
- .syss_offs = 0x44,
- .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
- SYSS_HAS_RESET_STATUS),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap2_rng_hwmod_class = {
- .name = "rng",
- .sysc = &omap2_rng_sysc,
-};
-
-struct omap_hwmod omap2xxx_rng_hwmod = {
- .name = "rng",
- .main_clk = "l4_ck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 4,
- .idlest_idle_bit = OMAP24XX_ST_RNG_SHIFT,
- },
- },
- /*
- * XXX The first read from the SYSSTATUS register of the RNG
- * after the SYSCONFIG SOFTRESET bit is set triggers an
- * imprecise external abort. It's unclear why this happens.
- * Until this is analyzed, skip the IP block reset.
- */
- .flags = HWMOD_INIT_NO_RESET,
- .class = &omap2_rng_hwmod_class,
-};
-
-/* SHAM */
-
-static struct omap_hwmod_class_sysconfig omap2_sham_sysc = {
- .rev_offs = 0x5c,
- .sysc_offs = 0x60,
- .syss_offs = 0x64,
- .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
- SYSS_HAS_RESET_STATUS),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap2xxx_sham_class = {
- .name = "sham",
- .sysc = &omap2_sham_sysc,
-};
-
-struct omap_hwmod omap2xxx_sham_hwmod = {
- .name = "sham",
- .main_clk = "l4_ck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 4,
- .idlest_idle_bit = OMAP24XX_ST_SHA_SHIFT,
- },
- },
- .class = &omap2xxx_sham_class,
-};
-
-/* AES */
-
-static struct omap_hwmod_class_sysconfig omap2_aes_sysc = {
- .rev_offs = 0x44,
- .sysc_offs = 0x48,
- .syss_offs = 0x4c,
- .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
- SYSS_HAS_RESET_STATUS),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap2xxx_aes_class = {
- .name = "aes",
- .sysc = &omap2_aes_sysc,
-};
-
-struct omap_hwmod omap2xxx_aes_hwmod = {
- .name = "aes",
- .main_clk = "l4_ck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 4,
- .idlest_idle_bit = OMAP24XX_ST_AES_SHIFT,
- },
- },
- .class = &omap2xxx_aes_class,
-};
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index 69dddc53e1d8..8b270cb3f64b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -15,68 +15,6 @@
#include "common.h"
#include "display.h"
-/* Common IP block data across OMAP2xxx */
-extern struct omap_hwmod omap2xxx_l3_main_hwmod;
-extern struct omap_hwmod omap2xxx_l4_core_hwmod;
-extern struct omap_hwmod omap2xxx_l4_wkup_hwmod;
-extern struct omap_hwmod omap2xxx_mpu_hwmod;
-extern struct omap_hwmod omap2xxx_timer3_hwmod;
-extern struct omap_hwmod omap2xxx_timer4_hwmod;
-extern struct omap_hwmod omap2xxx_timer5_hwmod;
-extern struct omap_hwmod omap2xxx_timer6_hwmod;
-extern struct omap_hwmod omap2xxx_timer7_hwmod;
-extern struct omap_hwmod omap2xxx_timer8_hwmod;
-extern struct omap_hwmod omap2xxx_timer9_hwmod;
-extern struct omap_hwmod omap2xxx_timer10_hwmod;
-extern struct omap_hwmod omap2xxx_timer11_hwmod;
-extern struct omap_hwmod omap2xxx_timer12_hwmod;
-extern struct omap_hwmod omap2xxx_wd_timer2_hwmod;
-extern struct omap_hwmod omap2xxx_uart1_hwmod;
-extern struct omap_hwmod omap2xxx_uart2_hwmod;
-extern struct omap_hwmod omap2xxx_uart3_hwmod;
-extern struct omap_hwmod omap2xxx_dss_core_hwmod;
-extern struct omap_hwmod omap2xxx_dss_dispc_hwmod;
-extern struct omap_hwmod omap2xxx_dss_rfbi_hwmod;
-extern struct omap_hwmod omap2xxx_dss_venc_hwmod;
-extern struct omap_hwmod omap2xxx_gpio1_hwmod;
-extern struct omap_hwmod omap2xxx_gpio2_hwmod;
-extern struct omap_hwmod omap2xxx_gpio3_hwmod;
-extern struct omap_hwmod omap2xxx_gpio4_hwmod;
-extern struct omap_hwmod omap2xxx_mcspi1_hwmod;
-extern struct omap_hwmod omap2xxx_mcspi2_hwmod;
-extern struct omap_hwmod omap2xxx_gpmc_hwmod;
-extern struct omap_hwmod omap2xxx_rng_hwmod;
-extern struct omap_hwmod omap2xxx_sham_hwmod;
-extern struct omap_hwmod omap2xxx_aes_hwmod;
-
-/* Common interface data across OMAP2xxx */
-extern struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core;
-extern struct omap_hwmod_ocp_if omap2xxx_mpu__l3_main;
-extern struct omap_hwmod_ocp_if omap2xxx_dss__l3;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__l4_wkup;
-extern struct omap_hwmod_ocp_if omap2_l4_core__uart1;
-extern struct omap_hwmod_ocp_if omap2_l4_core__uart2;
-extern struct omap_hwmod_ocp_if omap2_l4_core__uart3;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi1;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi2;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer3;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer4;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer5;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer6;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer7;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer8;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer9;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer10;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer11;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer12;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__rng;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__sham;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__aes;
-
/* OMAP hwmod classes - forward declarations */
extern struct omap_hwmod_class l3_hwmod_class;
extern struct omap_hwmod_class l4_hwmod_class;
@@ -88,10 +26,6 @@ extern struct omap_hwmod_class omap2_rfbi_hwmod_class;
extern struct omap_hwmod_class omap2_venc_hwmod_class;
extern struct omap_hwmod_class omap2_hdq1w_class;
-extern struct omap_hwmod_class omap2xxx_gpio_hwmod_class;
-extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class;
-extern struct omap_hwmod_class omap2xxx_mcspi_class;
-
extern struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr;
#endif
diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c
deleted file mode 100644
index 18a448f938ea..000000000000
--- a/arch/arm/mach-omap2/opp2420_data.c
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * opp2420_data.c - old-style "OPP" table for OMAP2420
- *
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2009 Nokia Corporation
- *
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
- * These configurations are characterized by voltage and speed for clocks.
- * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratios' which the clocks operate with
- * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio.
- *
- * XXX Missing voltage data.
- * XXX Missing 19.2MHz sys_clk rate sets (needed for N800/N810)
- *
- * THe format described in this file is deprecated. Once a reasonable
- * OPP API exists, the data in this file should be converted to use it.
- *
- * This is technically part of the OMAP2xxx clock code.
- *
- * Considerable work is still needed to fully support dynamic frequency
- * changes on OMAP2xxx-series chips. Readers interested in such a
- * project are encouraged to review the Maemo Diablo RX-34 and RX-44
- * kernel source at:
- * http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
- */
-
-#include <linux/kernel.h>
-
-#include "opp2xxx.h"
-#include "sdrc.h"
-#include "clock.h"
-
-/*
- * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
- * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
- * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- *
- * Filling in table based on H4 boards available. There are quite a
- * few more rate combinations which could be defined.
- *
- * When multiple values are defined the start up will try and choose
- * the fastest one. If a 'fast' value is defined, then automatically,
- * the /2 one should be included as it can be used. Generally having
- * more than one fast set does not make sense, as static timings need
- * to be changed to change the set. The exception is the bypass
- * setting which is available for low power bypass.
- *
- * Note: This table needs to be sorted, fastest to slowest.
- **/
-const struct prcm_config omap2420_rate_table[] = {
- /* PRCM I - FAST */
- {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
- RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
- RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
- RATE_IN_242X},
-
- /* PRCM II - FAST */
- {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
- RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
- RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
- RATE_IN_242X},
-
- {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
- RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
- RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
- RATE_IN_242X},
-
- /* PRCM III - FAST */
- {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
- RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
- RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
- RATE_IN_242X},
-
- {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
- RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
- RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
- RATE_IN_242X},
-
- /* PRCM II - SLOW */
- {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
- RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
- RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
- RATE_IN_242X},
-
- {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
- RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
- RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
- RATE_IN_242X},
-
- /* PRCM III - SLOW */
- {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
- RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
- RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
- RATE_IN_242X},
-
- {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
- RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
- RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
- RATE_IN_242X},
-
- /* PRCM-VII (boot-bypass) */
- {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/
- RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
- RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
- RATE_IN_242X},
-
- /* PRCM-VII (boot-bypass) */
- {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */
- RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
- RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
- RATE_IN_242X},
-
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
-};
diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c
deleted file mode 100644
index ded8b566a23a..000000000000
--- a/arch/arm/mach-omap2/opp2430_data.c
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * opp2430_data.c - old-style "OPP" table for OMAP2430
- *
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2009 Nokia Corporation
- *
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
- * These configurations are characterized by voltage and speed for clocks.
- * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratios' which the clocks operate with
- * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio.
- *
- * 2430 differs from 2420 in that there are no more phase synchronizers used.
- * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
- * 2430 (iva2.1, NOdsp, mdm)
- *
- * XXX Missing voltage data.
- * XXX Missing 19.2MHz sys_clk rate sets.
- *
- * THe format described in this file is deprecated. Once a reasonable
- * OPP API exists, the data in this file should be converted to use it.
- *
- * This is technically part of the OMAP2xxx clock code.
- */
-
-#include <linux/kernel.h>
-
-#include "opp2xxx.h"
-#include "sdrc.h"
-#include "clock.h"
-
-/*
- * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
- * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
- * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- *
- * Filling in table based on 2430-SDPs variants available. There are
- * quite a few more rate combinations which could be defined.
- *
- * When multiple values are defined the start up will try and choose
- * the fastest one. If a 'fast' value is defined, then automatically,
- * the /2 one should be included as it can be used. Generally having
- * more than one fast set does not make sense, as static timings need
- * to be changed to change the set. The exception is the bypass
- * setting which is available for low power bypass.
- *
- * Note: This table needs to be sorted, fastest to slowest.
- */
-const struct prcm_config omap2430_rate_table[] = {
- /* PRCM #4 - ratio2 (ES2.1) - FAST */
- {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */
- R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
- R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_133MHz,
- RATE_IN_243X},
-
- /* PRCM #2 - ratio1 (ES2) - FAST */
- {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
- R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
- R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_165MHz,
- RATE_IN_243X},
-
- /* PRCM #5a - ratio1 - FAST */
- {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
- R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
- R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_133MHz,
- RATE_IN_243X},
-
- /* PRCM #5b - ratio1 - FAST */
- {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
- R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
- R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_100MHz,
- RATE_IN_243X},
-
- /* PRCM #4 - ratio1 (ES2.1) - SLOW */
- {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
- R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
- R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_133MHz,
- RATE_IN_243X},
-
- /* PRCM #2 - ratio1 (ES2) - SLOW */
- {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */
- R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
- R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_165MHz,
- RATE_IN_243X},
-
- /* PRCM #5a - ratio1 - SLOW */
- {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
- R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
- R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_133MHz,
- RATE_IN_243X},
-
- /* PRCM #5b - ratio1 - SLOW*/
- {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */
- R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
- R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_100MHz,
- RATE_IN_243X},
-
- /* PRCM-boot/bypass */
- {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13MHz */
- RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
- RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_BYPASS,
- RATE_IN_243X},
-
- /* PRCM-boot/bypass */
- {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12MHz */
- RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
- RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_BYPASS,
- RATE_IN_243X},
-
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
-};
diff --git a/arch/arm/mach-omap2/opp2xxx.h b/arch/arm/mach-omap2/opp2xxx.h
deleted file mode 100644
index a451182cdc02..000000000000
--- a/arch/arm/mach-omap2/opp2xxx.h
+++ /dev/null
@@ -1,430 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * opp2xxx.h - macros for old-style OMAP2xxx "OPP" definitions
- *
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2009 Nokia Corporation
- *
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
- * These configurations are characterized by voltage and speed for clocks.
- * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
- * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
- *
- * 2430 differs from 2420 in that there are no more phase synchronizers used.
- * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
- * 2430 (iva2.1, NOdsp, mdm)
- *
- * XXX Missing voltage data.
- *
- * THe format described in this file is deprecated. Once a reasonable
- * OPP API exists, the data in this file should be converted to use it.
- *
- * This is technically part of the OMAP2xxx clock code.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_OPP2XXX_H
-#define __ARCH_ARM_MACH_OMAP2_OPP2XXX_H
-
-/**
- * struct prcm_config - define clock rates on a per-OPP basis (24xx)
- *
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
- * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- *
- * This is deprecated. As soon as we have a decent OPP API, we should
- * move all this stuff to it.
- */
-struct prcm_config {
- unsigned long xtal_speed; /* crystal rate */
- unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */
- unsigned long mpu_speed; /* speed of MPU */
- unsigned long cm_clksel_mpu; /* mpu divider */
- unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */
- unsigned long cm_clksel_gfx; /* gfx dividers */
- unsigned long cm_clksel1_core; /* major subsystem dividers */
- unsigned long cm_clksel1_pll; /* m,n */
- unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */
- unsigned long cm_clksel_mdm; /* modem dividers 2430 only */
- unsigned long base_sdrc_rfr; /* base refresh timing for a set */
- unsigned short flags;
-};
-
-
-/* Core fields for cm_clksel, not ratio governed */
-#define RX_CLKSEL_DSS1 (0x10 << 8)
-#define RX_CLKSEL_DSS2 (0x0 << 13)
-#define RX_CLKSEL_SSI (0x5 << 20)
-
-/*-------------------------------------------------------------------------
- * Voltage/DPLL ratios
- *-------------------------------------------------------------------------*/
-
-/* 2430 Ratio's, 2430-Ratio Config 1 */
-#define R1_CLKSEL_L3 (4 << 0)
-#define R1_CLKSEL_L4 (2 << 5)
-#define R1_CLKSEL_USB (4 << 25)
-#define R1_CM_CLKSEL1_CORE_VAL (R1_CLKSEL_USB | RX_CLKSEL_SSI | \
- RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
- R1_CLKSEL_L4 | R1_CLKSEL_L3)
-#define R1_CLKSEL_MPU (2 << 0)
-#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU
-#define R1_CLKSEL_DSP (2 << 0)
-#define R1_CLKSEL_DSP_IF (2 << 5)
-#define R1_CM_CLKSEL_DSP_VAL (R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF)
-#define R1_CLKSEL_GFX (2 << 0)
-#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX
-#define R1_CLKSEL_MDM (4 << 0)
-#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM
-
-/* 2430-Ratio Config 2 */
-#define R2_CLKSEL_L3 (6 << 0)
-#define R2_CLKSEL_L4 (2 << 5)
-#define R2_CLKSEL_USB (2 << 25)
-#define R2_CM_CLKSEL1_CORE_VAL (R2_CLKSEL_USB | RX_CLKSEL_SSI | \
- RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
- R2_CLKSEL_L4 | R2_CLKSEL_L3)
-#define R2_CLKSEL_MPU (2 << 0)
-#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU
-#define R2_CLKSEL_DSP (2 << 0)
-#define R2_CLKSEL_DSP_IF (3 << 5)
-#define R2_CM_CLKSEL_DSP_VAL (R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF)
-#define R2_CLKSEL_GFX (2 << 0)
-#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX
-#define R2_CLKSEL_MDM (6 << 0)
-#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM
-
-/* 2430-Ratio Bootm (BYPASS) */
-#define RB_CLKSEL_L3 (1 << 0)
-#define RB_CLKSEL_L4 (1 << 5)
-#define RB_CLKSEL_USB (1 << 25)
-#define RB_CM_CLKSEL1_CORE_VAL (RB_CLKSEL_USB | RX_CLKSEL_SSI | \
- RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
- RB_CLKSEL_L4 | RB_CLKSEL_L3)
-#define RB_CLKSEL_MPU (1 << 0)
-#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU
-#define RB_CLKSEL_DSP (1 << 0)
-#define RB_CLKSEL_DSP_IF (1 << 5)
-#define RB_CM_CLKSEL_DSP_VAL (RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF)
-#define RB_CLKSEL_GFX (1 << 0)
-#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX
-#define RB_CLKSEL_MDM (1 << 0)
-#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM
-
-/* 2420 Ratio Equivalents */
-#define RXX_CLKSEL_VLYNQ (0x12 << 15)
-#define RXX_CLKSEL_SSI (0x8 << 20)
-
-/* 2420-PRCM III 532MHz core */
-#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */
-#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */
-#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */
-#define RIII_CM_CLKSEL1_CORE_VAL (RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
- RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
- RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
- RIII_CLKSEL_L3)
-#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */
-#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU
-#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */
-#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */
-#define RIII_SYNC_DSP (1 << 7) /* Enable sync */
-#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */
-#define RIII_SYNC_IVA (1 << 13) /* Enable sync */
-#define RIII_CM_CLKSEL_DSP_VAL (RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
- RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
- RIII_CLKSEL_DSP)
-#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */
-#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX
-
-/* 2420-PRCM II 600MHz core */
-#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */
-#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */
-#define RII_CLKSEL_USB (2 << 25) /* 50MHz */
-#define RII_CM_CLKSEL1_CORE_VAL (RII_CLKSEL_USB | RXX_CLKSEL_SSI | \
- RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
- RX_CLKSEL_DSS1 | RII_CLKSEL_L4 | \
- RII_CLKSEL_L3)
-#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */
-#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU
-#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */
-#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */
-#define RII_SYNC_DSP (0 << 7) /* Bypass sync */
-#define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */
-#define RII_SYNC_IVA (0 << 13) /* Bypass sync */
-#define RII_CM_CLKSEL_DSP_VAL (RII_SYNC_IVA | RII_CLKSEL_IVA | \
- RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
- RII_CLKSEL_DSP)
-#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */
-#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX
-
-/* 2420-PRCM I 660MHz core */
-#define RI_CLKSEL_L3 (4 << 0) /* 165MHz */
-#define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */
-#define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */
-#define RI_CM_CLKSEL1_CORE_VAL (RI_CLKSEL_USB | \
- RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
- RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
- RI_CLKSEL_L4 | RI_CLKSEL_L3)
-#define RI_CLKSEL_MPU (2 << 0) /* 330MHz */
-#define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU
-#define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */
-#define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */
-#define RI_SYNC_DSP (1 << 7) /* Activate sync */
-#define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */
-#define RI_SYNC_IVA (0 << 13) /* Bypass sync */
-#define RI_CM_CLKSEL_DSP_VAL (RI_SYNC_IVA | RI_CLKSEL_IVA | \
- RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
- RI_CLKSEL_DSP)
-#define RI_CLKSEL_GFX (1 << 0) /* 165MHz */
-#define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX
-
-/* 2420-PRCM VII (boot) */
-#define RVII_CLKSEL_L3 (1 << 0)
-#define RVII_CLKSEL_L4 (1 << 5)
-#define RVII_CLKSEL_DSS1 (1 << 8)
-#define RVII_CLKSEL_DSS2 (0 << 13)
-#define RVII_CLKSEL_VLYNQ (1 << 15)
-#define RVII_CLKSEL_SSI (1 << 20)
-#define RVII_CLKSEL_USB (1 << 25)
-
-#define RVII_CM_CLKSEL1_CORE_VAL (RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
- RVII_CLKSEL_VLYNQ | \
- RVII_CLKSEL_DSS2 | RVII_CLKSEL_DSS1 | \
- RVII_CLKSEL_L4 | RVII_CLKSEL_L3)
-
-#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */
-#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU
-
-#define RVII_CLKSEL_DSP (1 << 0)
-#define RVII_CLKSEL_DSP_IF (1 << 5)
-#define RVII_SYNC_DSP (0 << 7)
-#define RVII_CLKSEL_IVA (1 << 8)
-#define RVII_SYNC_IVA (0 << 13)
-#define RVII_CM_CLKSEL_DSP_VAL (RVII_SYNC_IVA | RVII_CLKSEL_IVA | \
- RVII_SYNC_DSP | RVII_CLKSEL_DSP_IF | \
- RVII_CLKSEL_DSP)
-
-#define RVII_CLKSEL_GFX (1 << 0)
-#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX
-
-/*-------------------------------------------------------------------------
- * 2430 Target modes: Along with each configuration the CPU has several
- * modes which goes along with them. Modes mainly are the addition of
- * describe DPLL combinations to go along with a ratio.
- *-------------------------------------------------------------------------*/
-
-/* Hardware governed */
-#define MX_48M_SRC (0 << 3)
-#define MX_54M_SRC (0 << 5)
-#define MX_APLLS_CLIKIN_12 (3 << 23)
-#define MX_APLLS_CLIKIN_13 (2 << 23)
-#define MX_APLLS_CLIKIN_19_2 (0 << 23)
-
-/*
- * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
- * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz
- */
-#define M5A_DPLL_MULT_12 (133 << 12)
-#define M5A_DPLL_DIV_12 (5 << 8)
-#define M5A_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
- M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12)
-#define M5A_DPLL_MULT_13 (61 << 12)
-#define M5A_DPLL_DIV_13 (2 << 8)
-#define M5A_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
- M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13)
-#define M5A_DPLL_MULT_19 (55 << 12)
-#define M5A_DPLL_DIV_19 (3 << 8)
-#define M5A_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
- M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
- MX_APLLS_CLIKIN_19_2)
-/* #5b (ratio1) target DPLL = 200*2 = 400MHz */
-#define M5B_DPLL_MULT_12 (50 << 12)
-#define M5B_DPLL_DIV_12 (2 << 8)
-#define M5B_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
- M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12)
-#define M5B_DPLL_MULT_13 (200 << 12)
-#define M5B_DPLL_DIV_13 (12 << 8)
-
-#define M5B_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
- M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13)
-#define M5B_DPLL_MULT_19 (125 << 12)
-#define M5B_DPLL_DIV_19 (31 << 8)
-#define M5B_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
- M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
- MX_APLLS_CLIKIN_19_2)
-/*
- * #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
- */
-#define M4_DPLL_MULT_12 (133 << 12)
-#define M4_DPLL_DIV_12 (3 << 8)
-#define M4_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
- M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12)
-
-#define M4_DPLL_MULT_13 (399 << 12)
-#define M4_DPLL_DIV_13 (12 << 8)
-#define M4_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
- M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13)
-
-#define M4_DPLL_MULT_19 (145 << 12)
-#define M4_DPLL_DIV_19 (6 << 8)
-#define M4_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
- M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
- MX_APLLS_CLIKIN_19_2)
-
-/*
- * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz
- */
-#define M3_DPLL_MULT_12 (55 << 12)
-#define M3_DPLL_DIV_12 (1 << 8)
-#define M3_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
- M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12)
-#define M3_DPLL_MULT_13 (76 << 12)
-#define M3_DPLL_DIV_13 (2 << 8)
-#define M3_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
- M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13)
-#define M3_DPLL_MULT_19 (17 << 12)
-#define M3_DPLL_DIV_19 (0 << 8)
-#define M3_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
- M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
- MX_APLLS_CLIKIN_19_2)
-
-/*
- * #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
- */
-#define M2_DPLL_MULT_12 (55 << 12)
-#define M2_DPLL_DIV_12 (1 << 8)
-#define M2_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
- M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12)
-
-/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
- * relock time issue */
-/* Core frequency changed from 330/165 to 329/164 MHz*/
-#define M2_DPLL_MULT_13 (76 << 12)
-#define M2_DPLL_DIV_13 (2 << 8)
-#define M2_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
- M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13)
-
-#define M2_DPLL_MULT_19 (17 << 12)
-#define M2_DPLL_DIV_19 (0 << 8)
-#define M2_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
- M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
- MX_APLLS_CLIKIN_19_2)
-
-/* boot (boot) */
-#define MB_DPLL_MULT (1 << 12)
-#define MB_DPLL_DIV (0 << 8)
-#define MB_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
- MB_DPLL_DIV | MB_DPLL_MULT | \
- MX_APLLS_CLIKIN_12)
-
-#define MB_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
- MB_DPLL_DIV | MB_DPLL_MULT | \
- MX_APLLS_CLIKIN_13)
-
-#define MB_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
- MB_DPLL_DIV | MB_DPLL_MULT | \
- MX_APLLS_CLIKIN_19)
-
-/*
- * 2430 - chassis (sedna)
- * 165 (ratio1) same as above #2
- * 150 (ratio1)
- * 133 (ratio2) same as above #4
- * 110 (ratio2) same as above #3
- * 104 (ratio2)
- * boot (boot)
- */
-
-/* PRCM I target DPLL = 2*330MHz = 660MHz */
-#define MI_DPLL_MULT_12 (55 << 12)
-#define MI_DPLL_DIV_12 (1 << 8)
-#define MI_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
- MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12)
-
-/*
- * 2420 Equivalent - mode registers
- * PRCM II , target DPLL = 2*300MHz = 600MHz
- */
-#define MII_DPLL_MULT_12 (50 << 12)
-#define MII_DPLL_DIV_12 (1 << 8)
-#define MII_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
- MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12)
-#define MII_DPLL_MULT_13 (300 << 12)
-#define MII_DPLL_DIV_13 (12 << 8)
-#define MII_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
- MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13)
-
-/* PRCM III target DPLL = 2*266 = 532MHz*/
-#define MIII_DPLL_MULT_12 (133 << 12)
-#define MIII_DPLL_DIV_12 (5 << 8)
-#define MIII_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
- MIII_DPLL_DIV_12 | \
- MIII_DPLL_MULT_12 | MX_APLLS_CLIKIN_12)
-#define MIII_DPLL_MULT_13 (266 << 12)
-#define MIII_DPLL_DIV_13 (12 << 8)
-#define MIII_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
- MIII_DPLL_DIV_13 | \
- MIII_DPLL_MULT_13 | MX_APLLS_CLIKIN_13)
-
-/* PRCM VII (boot bypass) */
-#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL
-#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL
-
-/* High and low operation value */
-#define MX_CLKSEL2_PLL_2x_VAL (2 << 0)
-#define MX_CLKSEL2_PLL_1x_VAL (1 << 0)
-
-/* MPU speed defines */
-#define S12M 12000000
-#define S13M 13000000
-#define S19M 19200000
-#define S26M 26000000
-#define S100M 100000000
-#define S133M 133000000
-#define S150M 150000000
-#define S164M 164000000
-#define S165M 165000000
-#define S199M 199000000
-#define S200M 200000000
-#define S266M 266000000
-#define S300M 300000000
-#define S329M 329000000
-#define S330M 330000000
-#define S399M 399000000
-#define S400M 400000000
-#define S532M 532000000
-#define S600M 600000000
-#define S658M 658000000
-#define S660M 660000000
-#define S798M 798000000
-
-
-extern const struct prcm_config omap2420_rate_table[];
-
-#ifdef CONFIG_SOC_OMAP2430
-extern const struct prcm_config omap2430_rate_table[];
-#else
-#define omap2430_rate_table NULL
-#endif
-extern const struct prcm_config *rate_table;
-extern const struct prcm_config *curr_prcm_set;
-
-#endif
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index b947bacf23a3..8b8021b297aa 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -27,7 +27,6 @@
#include "clockdomain.h"
#include "common.h"
-#include "common-board-devices.h"
#include "control.h"
#include "omap_device.h"
#include "omap-secure.h"
@@ -42,15 +41,6 @@ struct pdata_init {
static struct of_dev_auxdata omap_auxdata_lookup[];
-#ifdef CONFIG_MACH_NOKIA_N8X0
-static void __init omap2420_n8x0_legacy_init(void)
-{
- omap_auxdata_lookup[0].platform_data = n8x0_legacy_init();
-}
-#else
-#define omap2420_n8x0_legacy_init NULL
-#endif
-
#ifdef CONFIG_ARCH_OMAP3
/*
* Configures GPIOs 126, 127 and 129 to 1.8V mode instead of 3.0V
@@ -431,26 +421,9 @@ static void __init omap3_mcbsp_init(void)
static void __init omap3_mcbsp_init(void) {}
#endif
-/*
- * Few boards still need auxdata populated before we populate
- * the dev entries in of_platform_populate().
- */
-static struct pdata_init auxdata_quirks[] __initdata = {
-#ifdef CONFIG_SOC_OMAP2420
- { "nokia,n800", omap2420_n8x0_legacy_init, },
- { "nokia,n810", omap2420_n8x0_legacy_init, },
- { "nokia,n810-wimax", omap2420_n8x0_legacy_init, },
-#endif
- { /* sentinel */ },
-};
-
struct omap_sr_data __maybe_unused omap_sr_pdata[OMAP_SR_NR];
static struct of_dev_auxdata omap_auxdata_lookup[] = {
-#ifdef CONFIG_MACH_NOKIA_N8X0
- OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL),
- OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data),
-#endif
#ifdef CONFIG_ARCH_OMAP3
OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
&omap3_iommu_pdata),
@@ -560,13 +533,11 @@ void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
* We still need this for omap2420 and omap3 PM to work, others are
* using drivers/misc/sram.c already.
*/
- if (of_machine_is_compatible("ti,omap2420") ||
- of_machine_is_compatible("ti,omap3"))
+ if (IS_ENABLED(CONFIG_ARCH_OMAP3) &&
+ of_machine_is_compatible("ti,omap3")) {
omap_sdrc_init(NULL, NULL);
-
- if (of_machine_is_compatible("ti,omap3"))
omap3_mcbsp_init();
- pdata_quirks_check(auxdata_quirks);
+ }
pdata_quirks_init_clocks(omap_dt_match_table);
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index f97ff93f2fb4..5751b85e9ffb 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -43,11 +43,6 @@ extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
#define pm_dbg_update_time(pwrdm, prev) do {} while (0);
#endif /* CONFIG_PM_DEBUG */
-/* 24xx */
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
- void __iomem *sdrc_power);
-extern unsigned int omap24xx_cpu_suspend_sz;
-
/* 3xxx */
extern void omap34xx_cpu_suspend(int save_state);
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index fbc89999460b..eaf6d1104dc2 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -244,8 +244,6 @@ int pwrdm_post_transition(struct powerdomain *pwrdm);
extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 state);
-extern void omap242x_powerdomains_init(void);
-extern void omap243x_powerdomains_init(void);
extern void omap3xxx_powerdomains_init(void);
extern void am33xx_powerdomains_init(void);
extern void omap44xx_powerdomains_init(void);
@@ -253,7 +251,6 @@ extern void omap54xx_powerdomains_init(void);
extern void dra7xx_powerdomains_init(void);
void am43xx_powerdomains_init(void);
-extern struct pwrdm_ops omap2_pwrdm_operations;
extern struct pwrdm_ops omap3_pwrdm_operations;
extern struct pwrdm_ops am33xx_pwrdm_operations;
extern struct pwrdm_ops omap4_pwrdm_operations;
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c
deleted file mode 100644
index fa259adbdc61..000000000000
--- a/arch/arm/mach-omap2/powerdomains2xxx_data.c
+++ /dev/null
@@ -1,134 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * OMAP2XXX powerdomain definitions
- *
- * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- *
- * Paul Walmsley, Jouni Högander
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include "soc.h"
-#include "powerdomain.h"
-#include "powerdomains2xxx_3xxx_data.h"
-
-#include "prcm-common.h"
-#include "prm2xxx_3xxx.h"
-#include "prm-regbits-24xx.h"
-
-/* 24XX powerdomains and dependencies */
-
-/* Powerdomains */
-
-static struct powerdomain dsp_pwrdm = {
- .name = "dsp_pwrdm",
- .prcm_offs = OMAP24XX_DSP_MOD,
- .pwrsts = PWRSTS_OFF_RET_ON,
- .pwrsts_logic_ret = PWRSTS_RET,
- .banks = 1,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_RET,
- },
- .pwrsts_mem_on = {
- [0] = PWRSTS_ON,
- },
- .voltdm = { .name = "core" },
-};
-
-static struct powerdomain mpu_24xx_pwrdm = {
- .name = "mpu_pwrdm",
- .prcm_offs = MPU_MOD,
- .pwrsts = PWRSTS_OFF_RET_ON,
- .pwrsts_logic_ret = PWRSTS_OFF_RET,
- .banks = 1,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_RET,
- },
- .pwrsts_mem_on = {
- [0] = PWRSTS_ON,
- },
- .voltdm = { .name = "core" },
-};
-
-static struct powerdomain core_24xx_pwrdm = {
- .name = "core_pwrdm",
- .prcm_offs = CORE_MOD,
- .pwrsts = PWRSTS_OFF_RET_ON,
- .pwrsts_logic_ret = PWRSTS_RET,
- .banks = 3,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_OFF_RET, /* MEM1RETSTATE */
- [1] = PWRSTS_OFF_RET, /* MEM2RETSTATE */
- [2] = PWRSTS_OFF_RET, /* MEM3RETSTATE */
- },
- .pwrsts_mem_on = {
- [0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
- [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
- [2] = PWRSTS_OFF_RET_ON, /* MEM3ONSTATE */
- },
- .voltdm = { .name = "core" },
-};
-
-
-/*
- * 2430-specific powerdomains
- */
-
-/* XXX 2430 KILLDOMAINWKUP bit? No current users apparently */
-
-static struct powerdomain mdm_pwrdm = {
- .name = "mdm_pwrdm",
- .prcm_offs = OMAP2430_MDM_MOD,
- .pwrsts = PWRSTS_OFF_RET_ON,
- .pwrsts_logic_ret = PWRSTS_RET,
- .banks = 1,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_RET, /* MEMRETSTATE */
- },
- .pwrsts_mem_on = {
- [0] = PWRSTS_ON, /* MEMONSTATE */
- },
- .voltdm = { .name = "core" },
-};
-
-/*
- *
- */
-
-static struct powerdomain *powerdomains_omap24xx[] __initdata = {
- &wkup_omap2_pwrdm,
- &gfx_omap2_pwrdm,
- &dsp_pwrdm,
- &mpu_24xx_pwrdm,
- &core_24xx_pwrdm,
- NULL
-};
-
-static struct powerdomain *powerdomains_omap2430[] __initdata = {
- &mdm_pwrdm,
- NULL
-};
-
-void __init omap242x_powerdomains_init(void)
-{
- if (!cpu_is_omap2420())
- return;
-
- pwrdm_register_platform_funcs(&omap2_pwrdm_operations);
- pwrdm_register_pwrdms(powerdomains_omap24xx);
- pwrdm_complete_init();
-}
-
-void __init omap243x_powerdomains_init(void)
-{
- if (!cpu_is_omap2430())
- return;
-
- pwrdm_register_platform_funcs(&omap2_pwrdm_operations);
- pwrdm_register_pwrdms(powerdomains_omap24xx);
- pwrdm_register_pwrdms(powerdomains_omap2430);
- pwrdm_complete_init();
-}
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 5e3544a63526..e326bb6a09db 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -27,12 +27,6 @@
#define PLL_MOD 0x500
-/* Chip-specific module offsets */
-#define OMAP24XX_GR_MOD OCP_MOD
-#define OMAP24XX_DSP_MOD 0x800
-
-#define OMAP2430_MDM_MOD 0xc00
-
/* IVA2 module is < base on 3430 */
#define OMAP3430_IVA2_MOD -0x800
#define OMAP3430ES2_SGX_MOD GFX_MOD
@@ -63,147 +57,6 @@
#define TI816X_PRM_SGX_MOD 0x0f00
#define TI81XX_PRM_ALWON_MOD 0x1800
-/* 24XX register bits shared between CM & PRM registers */
-
-/* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
-#define OMAP2420_EN_MMC_SHIFT 26
-#define OMAP2420_EN_MMC_MASK (1 << 26)
-#define OMAP24XX_EN_UART2_SHIFT 22
-#define OMAP24XX_EN_UART2_MASK (1 << 22)
-#define OMAP24XX_EN_UART1_SHIFT 21
-#define OMAP24XX_EN_UART1_MASK (1 << 21)
-#define OMAP24XX_EN_MCSPI2_SHIFT 18
-#define OMAP24XX_EN_MCSPI2_MASK (1 << 18)
-#define OMAP24XX_EN_MCSPI1_SHIFT 17
-#define OMAP24XX_EN_MCSPI1_MASK (1 << 17)
-#define OMAP24XX_EN_MCBSP2_SHIFT 16
-#define OMAP24XX_EN_MCBSP2_MASK (1 << 16)
-#define OMAP24XX_EN_MCBSP1_SHIFT 15
-#define OMAP24XX_EN_MCBSP1_MASK (1 << 15)
-#define OMAP24XX_EN_GPT12_SHIFT 14
-#define OMAP24XX_EN_GPT12_MASK (1 << 14)
-#define OMAP24XX_EN_GPT11_SHIFT 13
-#define OMAP24XX_EN_GPT11_MASK (1 << 13)
-#define OMAP24XX_EN_GPT10_SHIFT 12
-#define OMAP24XX_EN_GPT10_MASK (1 << 12)
-#define OMAP24XX_EN_GPT9_SHIFT 11
-#define OMAP24XX_EN_GPT9_MASK (1 << 11)
-#define OMAP24XX_EN_GPT8_SHIFT 10
-#define OMAP24XX_EN_GPT8_MASK (1 << 10)
-#define OMAP24XX_EN_GPT7_SHIFT 9
-#define OMAP24XX_EN_GPT7_MASK (1 << 9)
-#define OMAP24XX_EN_GPT6_SHIFT 8
-#define OMAP24XX_EN_GPT6_MASK (1 << 8)
-#define OMAP24XX_EN_GPT5_SHIFT 7
-#define OMAP24XX_EN_GPT5_MASK (1 << 7)
-#define OMAP24XX_EN_GPT4_SHIFT 6
-#define OMAP24XX_EN_GPT4_MASK (1 << 6)
-#define OMAP24XX_EN_GPT3_SHIFT 5
-#define OMAP24XX_EN_GPT3_MASK (1 << 5)
-#define OMAP24XX_EN_GPT2_SHIFT 4
-#define OMAP24XX_EN_GPT2_MASK (1 << 4)
-#define OMAP2420_EN_VLYNQ_SHIFT 3
-#define OMAP2420_EN_VLYNQ_MASK (1 << 3)
-
-/* CM_FCLKEN2_CORE, CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
-#define OMAP2430_EN_GPIO5_SHIFT 10
-#define OMAP2430_EN_GPIO5_MASK (1 << 10)
-#define OMAP2430_EN_MCSPI3_SHIFT 9
-#define OMAP2430_EN_MCSPI3_MASK (1 << 9)
-#define OMAP2430_EN_MMCHS2_SHIFT 8
-#define OMAP2430_EN_MMCHS2_MASK (1 << 8)
-#define OMAP2430_EN_MMCHS1_SHIFT 7
-#define OMAP2430_EN_MMCHS1_MASK (1 << 7)
-#define OMAP24XX_EN_UART3_SHIFT 2
-#define OMAP24XX_EN_UART3_MASK (1 << 2)
-#define OMAP24XX_EN_USB_SHIFT 0
-#define OMAP24XX_EN_USB_MASK (1 << 0)
-
-/* CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
-#define OMAP2430_EN_MDM_INTC_SHIFT 11
-#define OMAP2430_EN_MDM_INTC_MASK (1 << 11)
-#define OMAP2430_EN_USBHS_SHIFT 6
-#define OMAP2430_EN_USBHS_MASK (1 << 6)
-#define OMAP24XX_EN_GPMC_SHIFT 1
-#define OMAP24XX_EN_GPMC_MASK (1 << 1)
-
-/* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */
-#define OMAP2420_ST_MMC_SHIFT 26
-#define OMAP2420_ST_MMC_MASK (1 << 26)
-#define OMAP24XX_ST_UART2_SHIFT 22
-#define OMAP24XX_ST_UART2_MASK (1 << 22)
-#define OMAP24XX_ST_UART1_SHIFT 21
-#define OMAP24XX_ST_UART1_MASK (1 << 21)
-#define OMAP24XX_ST_MCSPI2_SHIFT 18
-#define OMAP24XX_ST_MCSPI2_MASK (1 << 18)
-#define OMAP24XX_ST_MCSPI1_SHIFT 17
-#define OMAP24XX_ST_MCSPI1_MASK (1 << 17)
-#define OMAP24XX_ST_MCBSP2_SHIFT 16
-#define OMAP24XX_ST_MCBSP2_MASK (1 << 16)
-#define OMAP24XX_ST_MCBSP1_SHIFT 15
-#define OMAP24XX_ST_MCBSP1_MASK (1 << 15)
-#define OMAP24XX_ST_GPT12_SHIFT 14
-#define OMAP24XX_ST_GPT12_MASK (1 << 14)
-#define OMAP24XX_ST_GPT11_SHIFT 13
-#define OMAP24XX_ST_GPT11_MASK (1 << 13)
-#define OMAP24XX_ST_GPT10_SHIFT 12
-#define OMAP24XX_ST_GPT10_MASK (1 << 12)
-#define OMAP24XX_ST_GPT9_SHIFT 11
-#define OMAP24XX_ST_GPT9_MASK (1 << 11)
-#define OMAP24XX_ST_GPT8_SHIFT 10
-#define OMAP24XX_ST_GPT8_MASK (1 << 10)
-#define OMAP24XX_ST_GPT7_SHIFT 9
-#define OMAP24XX_ST_GPT7_MASK (1 << 9)
-#define OMAP24XX_ST_GPT6_SHIFT 8
-#define OMAP24XX_ST_GPT6_MASK (1 << 8)
-#define OMAP24XX_ST_GPT5_SHIFT 7
-#define OMAP24XX_ST_GPT5_MASK (1 << 7)
-#define OMAP24XX_ST_GPT4_SHIFT 6
-#define OMAP24XX_ST_GPT4_MASK (1 << 6)
-#define OMAP24XX_ST_GPT3_SHIFT 5
-#define OMAP24XX_ST_GPT3_MASK (1 << 5)
-#define OMAP24XX_ST_GPT2_SHIFT 4
-#define OMAP24XX_ST_GPT2_MASK (1 << 4)
-#define OMAP2420_ST_VLYNQ_SHIFT 3
-#define OMAP2420_ST_VLYNQ_MASK (1 << 3)
-
-/* CM_IDLEST2_CORE, PM_WKST2_CORE shared bits */
-#define OMAP2430_ST_MDM_INTC_SHIFT 11
-#define OMAP2430_ST_MDM_INTC_MASK (1 << 11)
-#define OMAP2430_ST_GPIO5_SHIFT 10
-#define OMAP2430_ST_GPIO5_MASK (1 << 10)
-#define OMAP2430_ST_MCSPI3_SHIFT 9
-#define OMAP2430_ST_MCSPI3_MASK (1 << 9)
-#define OMAP2430_ST_MMCHS2_SHIFT 8
-#define OMAP2430_ST_MMCHS2_MASK (1 << 8)
-#define OMAP2430_ST_MMCHS1_SHIFT 7
-#define OMAP2430_ST_MMCHS1_MASK (1 << 7)
-#define OMAP2430_ST_USBHS_SHIFT 6
-#define OMAP2430_ST_USBHS_MASK (1 << 6)
-#define OMAP24XX_ST_UART3_SHIFT 2
-#define OMAP24XX_ST_UART3_MASK (1 << 2)
-#define OMAP24XX_ST_USB_SHIFT 0
-#define OMAP24XX_ST_USB_MASK (1 << 0)
-
-/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
-#define OMAP24XX_EN_GPIOS_SHIFT 2
-#define OMAP24XX_EN_GPIOS_MASK (1 << 2)
-#define OMAP24XX_EN_GPT1_SHIFT 0
-#define OMAP24XX_EN_GPT1_MASK (1 << 0)
-
-/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
-#define OMAP24XX_ST_GPIOS_SHIFT 2
-#define OMAP24XX_ST_GPIOS_MASK (1 << 2)
-#define OMAP24XX_ST_32KSYNC_SHIFT 1
-#define OMAP24XX_ST_32KSYNC_MASK (1 << 1)
-#define OMAP24XX_ST_GPT1_SHIFT 0
-#define OMAP24XX_ST_GPT1_MASK (1 << 0)
-
-/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
-#define OMAP2430_ST_MDM_SHIFT 0
-#define OMAP2430_ST_MDM_MASK (1 << 0)
-
-
/* 3430 register bits shared between CM & PRM registers */
/* CM_REVISION, PRM_REVISION shared bits */
diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h
deleted file mode 100644
index ff83801f6439..000000000000
--- a/arch/arm/mach-omap2/prm-regbits-24xx.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_24XX_H
-#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_24XX_H
-
-/*
- * OMAP24XX Power/Reset Management register bits
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
- *
- * Written by Paul Walmsley
- */
-
-#include "prm2xxx.h"
-
-#define OMAP24XX_EN_CORE_SHIFT 0
-#define OMAP24XX_FORCESTATE_MASK (1 << 18)
-#define OMAP24XX_AUTOIDLE_MASK (1 << 0)
-#define OMAP24XX_AUTO_EXTVOLT_MASK (1 << 15)
-#define OMAP24XX_SETOFF_LEVEL_SHIFT 12
-#define OMAP24XX_MEMRETCTRL_MASK (1 << 8)
-#define OMAP24XX_SETRET_LEVEL_SHIFT 6
-#define OMAP24XX_VOLT_LEVEL_SHIFT 0
-#define OMAP2420_CLKOUT2_EN_SHIFT 15
-#define OMAP2420_CLKOUT2_DIV_SHIFT 11
-#define OMAP2420_CLKOUT2_DIV_WIDTH 3
-#define OMAP2420_CLKOUT2_SOURCE_MASK (0x3 << 8)
-#define OMAP24XX_CLKOUT_EN_SHIFT 7
-#define OMAP24XX_CLKOUT_DIV_SHIFT 3
-#define OMAP24XX_CLKOUT_DIV_WIDTH 3
-#define OMAP24XX_CLKOUT_SOURCE_MASK (0x3 << 0)
-#define OMAP24XX_EMULATION_EN_SHIFT 0
-#define OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT 5
-#define OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT 2
-#define OMAP24XX_EXTWMPU_RST_SHIFT 6
-#define OMAP24XX_SECU_WD_RST_SHIFT 5
-#define OMAP24XX_MPU_WD_RST_SHIFT 4
-#define OMAP24XX_SECU_VIOL_RST_SHIFT 3
-#endif
diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
deleted file mode 100644
index 35a58f54b528..000000000000
--- a/arch/arm/mach-omap2/prm2xxx.c
+++ /dev/null
@@ -1,229 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * OMAP2xxx PRM module functions
- *
- * Copyright (C) 2010-2012 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- * Benoît Cousson
- * Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-
-#include "powerdomain.h"
-#include "clockdomain.h"
-#include "prm2xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "prm-regbits-24xx.h"
-
-/*
- * OMAP24xx PM_PWSTCTRL_*.POWERSTATE and PM_PWSTST_*.LASTSTATEENTERED bits -
- * these are reversed from the bits used on OMAP3+
- */
-#define OMAP24XX_PWRDM_POWER_ON 0x0
-#define OMAP24XX_PWRDM_POWER_RET 0x1
-#define OMAP24XX_PWRDM_POWER_OFF 0x3
-
-/*
- * omap2xxx_prm_reset_src_map - map from bits in the PRM_RSTST_WKUP
- * hardware register (which are specific to the OMAP2xxx SoCs) to
- * reset source ID bit shifts (which is an OMAP SoC-independent
- * enumeration)
- */
-static struct prm_reset_src_map omap2xxx_prm_reset_src_map[] = {
- { OMAP_GLOBALCOLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
- { OMAP_GLOBALWARM_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
- { OMAP24XX_SECU_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
- { OMAP24XX_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
- { OMAP24XX_SECU_WD_RST_SHIFT, OMAP_SECU_WD_RST_SRC_ID_SHIFT },
- { OMAP24XX_EXTWMPU_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
- { -1, -1 },
-};
-
-/**
- * omap2xxx_prm_read_reset_sources - return the last SoC reset source
- *
- * Return a u32 representing the last reset sources of the SoC. The
- * returned reset source bits are standardized across OMAP SoCs.
- */
-static u32 omap2xxx_prm_read_reset_sources(void)
-{
- struct prm_reset_src_map *p;
- u32 r = 0;
- u32 v;
-
- v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST);
-
- p = omap2xxx_prm_reset_src_map;
- while (p->reg_shift >= 0 && p->std_shift >= 0) {
- if (v & (1 << p->reg_shift))
- r |= 1 << p->std_shift;
- p++;
- }
-
- return r;
-}
-
-/**
- * omap2xxx_pwrst_to_common_pwrst - convert OMAP2xxx pwrst to common pwrst
- * @omap2xxx_pwrst: OMAP2xxx hardware power state to convert
- *
- * Return the common power state bits corresponding to the OMAP2xxx
- * hardware power state bits @omap2xxx_pwrst, or -EINVAL upon error.
- */
-static int omap2xxx_pwrst_to_common_pwrst(u8 omap2xxx_pwrst)
-{
- u8 pwrst;
-
- switch (omap2xxx_pwrst) {
- case OMAP24XX_PWRDM_POWER_OFF:
- pwrst = PWRDM_POWER_OFF;
- break;
- case OMAP24XX_PWRDM_POWER_RET:
- pwrst = PWRDM_POWER_RET;
- break;
- case OMAP24XX_PWRDM_POWER_ON:
- pwrst = PWRDM_POWER_ON;
- break;
- default:
- return -EINVAL;
- }
-
- return pwrst;
-}
-
-/**
- * omap2xxx_prm_dpll_reset - use DPLL reset to reboot the OMAP SoC
- *
- * Set the DPLL reset bit, which should reboot the SoC. This is the
- * recommended way to restart the SoC. No return value.
- */
-static void omap2xxx_prm_dpll_reset(void)
-{
- omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, WKUP_MOD,
- OMAP2_RM_RSTCTRL);
- /* OCP barrier */
- omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTCTRL);
-}
-
-/**
- * omap2xxx_prm_clear_mod_irqs - clear wakeup status bits for a module
- * @module: PRM module to clear wakeups from
- * @regs: register offset to clear
- * @wkst_mask: wakeup status mask to clear
- *
- * Clears wakeup status bits for a given module, so that the device can
- * re-enter idle.
- */
-static int omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
-{
- u32 wkst;
-
- wkst = omap2_prm_read_mod_reg(module, regs);
- wkst &= wkst_mask;
- omap2_prm_write_mod_reg(wkst, module, regs);
- return 0;
-}
-
-int omap2xxx_clkdm_sleep(struct clockdomain *clkdm)
-{
- omap2_prm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
- clkdm->pwrdm.ptr->prcm_offs,
- OMAP2_PM_PWSTCTRL);
- return 0;
-}
-
-int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm)
-{
- omap2_prm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
- clkdm->pwrdm.ptr->prcm_offs,
- OMAP2_PM_PWSTCTRL);
- return 0;
-}
-
-static int omap2xxx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
-{
- u8 omap24xx_pwrst;
-
- switch (pwrst) {
- case PWRDM_POWER_OFF:
- omap24xx_pwrst = OMAP24XX_PWRDM_POWER_OFF;
- break;
- case PWRDM_POWER_RET:
- omap24xx_pwrst = OMAP24XX_PWRDM_POWER_RET;
- break;
- case PWRDM_POWER_ON:
- omap24xx_pwrst = OMAP24XX_PWRDM_POWER_ON;
- break;
- default:
- return -EINVAL;
- }
-
- omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
- (omap24xx_pwrst << OMAP_POWERSTATE_SHIFT),
- pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
- return 0;
-}
-
-static int omap2xxx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
-{
- u8 omap2xxx_pwrst;
-
- omap2xxx_pwrst = omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP2_PM_PWSTCTRL,
- OMAP_POWERSTATE_MASK);
-
- return omap2xxx_pwrst_to_common_pwrst(omap2xxx_pwrst);
-}
-
-static int omap2xxx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
-{
- u8 omap2xxx_pwrst;
-
- omap2xxx_pwrst = omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP2_PM_PWSTST,
- OMAP_POWERSTATEST_MASK);
-
- return omap2xxx_pwrst_to_common_pwrst(omap2xxx_pwrst);
-}
-
-struct pwrdm_ops omap2_pwrdm_operations = {
- .pwrdm_set_next_pwrst = omap2xxx_pwrdm_set_next_pwrst,
- .pwrdm_read_next_pwrst = omap2xxx_pwrdm_read_next_pwrst,
- .pwrdm_read_pwrst = omap2xxx_pwrdm_read_pwrst,
- .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
- .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
- .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
- .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
- .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
- .pwrdm_wait_transition = omap2_pwrdm_wait_transition,
-};
-
-/*
- *
- */
-
-static struct prm_ll_data omap2xxx_prm_ll_data = {
- .read_reset_sources = &omap2xxx_prm_read_reset_sources,
- .assert_hardreset = &omap2_prm_assert_hardreset,
- .deassert_hardreset = &omap2_prm_deassert_hardreset,
- .is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
- .reset_system = &omap2xxx_prm_dpll_reset,
- .clear_mod_irqs = &omap2xxx_prm_clear_mod_irqs,
-};
-
-int __init omap2xxx_prm_init(const struct omap_prcm_init_data *data)
-{
- return prm_register(&omap2xxx_prm_ll_data);
-}
-
-static void __exit omap2xxx_prm_exit(void)
-{
- prm_unregister(&omap2xxx_prm_ll_data);
-}
-__exitcall(omap2xxx_prm_exit);
diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h
deleted file mode 100644
index 659b917348f8..000000000000
--- a/arch/arm/mach-omap2/prm2xxx.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * OMAP2xxx Power/Reset Management (PRM) register definitions
- *
- * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- * Paul Walmsley
- *
- * The PRM hardware modules on the OMAP2/3 are quite similar to each
- * other. The PRM on OMAP4 has a new register layout, and is handled
- * in a separate file.
- */
-#ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
-#define __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
-
-#include "prcm-common.h"
-#include "prm.h"
-#include "prm2xxx_3xxx.h"
-
-#define OMAP2420_PRM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
-#define OMAP2430_PRM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
-
-/*
- * OMAP2-specific global PRM registers
- * Use {read,write}l_relaxed() with these registers.
- *
- * With a few exceptions, these are the register names beginning with
- * PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE
- * bits.)
- *
- */
-
-#define OMAP2_PRCM_REVISION_OFFSET 0x0000
-#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
-#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
-#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
-#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
-#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
-#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
-#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
-#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
-#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
-#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
-#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
-#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
-#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
-#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
-#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
-
-#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
-#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
-
-/*
- * Module specific PRM register offsets from PRM_BASE + domain offset
- *
- * Use prm_{read,write}_mod_reg() with these registers.
- *
- * With a few exceptions, these are the register names beginning with
- * {PM,RM}_* on both OMAP2/3 SoC families.. (The exceptions are the
- * IRQSTATUS and IRQENABLE bits.)
- */
-
-/* Register offsets appearing on both OMAP2 and OMAP3 */
-
-#define OMAP2_RM_RSTCTRL 0x0050
-#define OMAP2_RM_RSTTIME 0x0054
-#define OMAP2_RM_RSTST 0x0058
-#define OMAP2_PM_PWSTCTRL 0x00e0
-#define OMAP2_PM_PWSTST 0x00e4
-
-#define PM_WKEN 0x00a0
-#define PM_WKEN1 PM_WKEN
-#define PM_WKST 0x00b0
-#define PM_WKST1 PM_WKST
-#define PM_WKDEP 0x00c8
-#define PM_EVGENCTRL 0x00d4
-#define PM_EVGENONTIM 0x00d8
-#define PM_EVGENOFFTIM 0x00dc
-
-/* OMAP2xxx specific register offsets */
-#define OMAP24XX_PM_WKEN2 0x00a4
-#define OMAP24XX_PM_WKST2 0x00b4
-
-#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
-#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
-#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
-#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
-
-#ifndef __ASSEMBLER__
-/* Function prototypes */
-extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
-extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
-
-int __init omap2xxx_prm_init(const struct omap_prcm_init_data *data);
-
-#endif
-
-#endif
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index d983efac6f4f..afaba7153ece 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -15,7 +15,6 @@
#include "powerdomain.h"
#include "prm2xxx_3xxx.h"
-#include "prm-regbits-24xx.h"
#include "clockdomain.h"
/**
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index ee4588acda50..3546e7292bfb 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -26,7 +26,6 @@
#include "soc.h"
#include "prm2xxx_3xxx.h"
-#include "prm2xxx.h"
#include "prm3xxx.h"
#include "prm33xx.h"
#include "prm44xx.h"
@@ -582,13 +581,6 @@ int prm_unregister(struct prm_ll_data *pld)
return 0;
}
-#ifdef CONFIG_ARCH_OMAP2
-static struct omap_prcm_init_data omap2_prm_data __initdata = {
- .index = TI_CLKM_PRM,
- .init = omap2xxx_prm_init,
-};
-#endif
-
#ifdef CONFIG_ARCH_OMAP3
static struct omap_prcm_init_data omap3_prm_data __initdata = {
.index = TI_CLKM_PRM,
@@ -670,9 +662,6 @@ static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
{ .compatible = "ti,dm814-pllss", .data = &dm814_pllss_data },
{ .compatible = "ti,dm816-prcm", .data = &am3_prm_data },
#endif
-#ifdef CONFIG_ARCH_OMAP2
- { .compatible = "ti,omap2-prcm", .data = &omap2_prm_data },
-#endif
#ifdef CONFIG_ARCH_OMAP3
{ .compatible = "ti,omap3-prm", .data = &omap3_prm_data },
#endif
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 45b35422b587..c34fba4d2f1a 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -90,17 +90,7 @@ struct memory_timings {
u32 base_cs; /* base chip select to use for calculations */
};
-extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
-
-u32 omap2xxx_sdrc_dll_is_unlocked(void);
-u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
-
-
#else
-#define OMAP242X_SDRC_REGADDR(reg) \
- OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
-#define OMAP243X_SDRC_REGADDR(reg) \
- OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
#define OMAP34XX_SDRC_REGADDR(reg) \
OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
@@ -184,17 +174,6 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */
-/*
- * SMS register access
- */
-
-#define OMAP242X_SMS_REGADDR(reg) \
- (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg) \
- (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg) \
- (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
-
/* SMS register offsets - read/write with sms_{read,write}_reg() */
#define SMS_SYSCONFIG 0x010
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
deleted file mode 100644
index 5a275b4fd404..000000000000
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ /dev/null
@@ -1,164 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * SDRAM timing related functions for OMAP2xxx
- *
- * Copyright (C) 2005, 2008 Texas Instruments Inc.
- * Copyright (C) 2005, 2008 Nokia Corporation
- *
- * Tony Lindgren <tony@atomide.com>
- * Paul Walmsley
- * Richard Woodruff <r-woodruff2@ti.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "iomap.h"
-#include "common.h"
-#include "prm2xxx.h"
-#include "clock.h"
-#include "sdrc.h"
-#include "sram.h"
-
-/* Memory timing, DLL mode flags */
-#define M_DDR 1
-#define M_LOCK_CTRL (1 << 2)
-#define M_UNLOCK 0
-#define M_LOCK 1
-
-
-static struct memory_timings mem_timings;
-static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2;
-
-static u32 omap2xxx_sdrc_get_slow_dll_ctrl(void)
-{
- return mem_timings.slow_dll_ctrl;
-}
-
-static u32 omap2xxx_sdrc_get_fast_dll_ctrl(void)
-{
- return mem_timings.fast_dll_ctrl;
-}
-
-static u32 omap2xxx_sdrc_get_type(void)
-{
- return mem_timings.m_type;
-}
-
-/*
- * Check the DLL lock state, and return tue if running in unlock mode.
- * This is needed to compensate for the shifted DLL value in unlock mode.
- */
-u32 omap2xxx_sdrc_dll_is_unlocked(void)
-{
- /* dlla and dllb are a set */
- u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL);
-
- if ((dll_state & (1 << 2)) == (1 << 2))
- return 1;
- else
- return 0;
-}
-
-/*
- * 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC.
- * Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or
- * CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2)
- *
- * Used by the clock framework during CORE DPLL changes
- */
-u32 omap2xxx_sdrc_reprogram(u32 level, u32 force)
-{
- u32 dll_ctrl, m_type;
- u32 prev = curr_perf_level;
- unsigned long flags;
-
- if ((curr_perf_level == level) && !force)
- return prev;
-
- if (level == CORE_CLK_SRC_DPLL)
- dll_ctrl = omap2xxx_sdrc_get_slow_dll_ctrl();
- else if (level == CORE_CLK_SRC_DPLL_X2)
- dll_ctrl = omap2xxx_sdrc_get_fast_dll_ctrl();
- else
- return prev;
-
- m_type = omap2xxx_sdrc_get_type();
-
- local_irq_save(flags);
- /*
- * XXX These calls should be abstracted out through a
- * prm2xxx.c function
- */
- if (cpu_is_omap2420())
- writel_relaxed(0xffff, OMAP2420_PRCM_VOLTSETUP);
- else
- writel_relaxed(0xffff, OMAP2430_PRCM_VOLTSETUP);
- omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
- curr_perf_level = level;
- local_irq_restore(flags);
-
- return prev;
-}
-
-/* Used by the clock framework during CORE DPLL changes */
-void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode)
-{
- unsigned long dll_cnt;
- u32 fast_dll = 0;
-
- /* DDR = 1, SDR = 0 */
- mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1);
-
- /* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
- * In the case of 2422, its ok to use CS1 instead of CS0.
- */
- if (cpu_is_omap2422())
- mem_timings.base_cs = 1;
- else
- mem_timings.base_cs = 0;
-
- if (mem_timings.m_type != M_DDR)
- return;
-
- /* With DDR we need to determine the low frequency DLL value */
- if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL))
- mem_timings.dll_mode = M_UNLOCK;
- else
- mem_timings.dll_mode = M_LOCK;
-
- if (mem_timings.base_cs == 0) {
- fast_dll = sdrc_read_reg(SDRC_DLLA_CTRL);
- dll_cnt = sdrc_read_reg(SDRC_DLLA_STATUS) & 0xff00;
- } else {
- fast_dll = sdrc_read_reg(SDRC_DLLB_CTRL);
- dll_cnt = sdrc_read_reg(SDRC_DLLB_STATUS) & 0xff00;
- }
- if (force_lock_to_unlock_mode) {
- fast_dll &= ~0xff00;
- fast_dll |= dll_cnt; /* Current lock mode */
- }
- /* set fast timings with DLL filter disabled */
- mem_timings.fast_dll_ctrl = (fast_dll | (3 << 8));
-
- /* No disruptions, DDR will be offline & C-ABI not followed */
- omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl,
- mem_timings.fast_dll_ctrl,
- mem_timings.base_cs,
- force_lock_to_unlock_mode);
- mem_timings.slow_dll_ctrl &= 0xff00; /* Keep lock value */
-
- /* Turn status into unlock ctrl */
- mem_timings.slow_dll_ctrl |=
- ((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2));
-
- /* 90 degree phase for anything below 133MHz + disable DLL filter */
- mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
-}
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
deleted file mode 100644
index 84d8c43ad382..000000000000
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ /dev/null
@@ -1,91 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * linux/arch/arm/mach-omap2/sleep.S
- *
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * (C) Copyright 2006 Nokia Corporation
- * Fixed idle loop sleep
- * Igor Stoppa <igor.stoppa@nokia.com>
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-#include "omap24xx.h"
-#include "sdrc.h"
-
-/* First address of reserved address space? apparently valid for OMAP2 & 3 */
-#define A_SDRC0_V (0xC0000000)
-
- .text
-
-/*
- * omap24xx_cpu_suspend() - Forces OMAP into deep sleep state by completing
- * SDRC shutdown then ARM shutdown. Upon wake MPU is back on so just restore
- * SDRC.
- *
- * Input:
- * R0 : DLL ctrl value pre-Sleep
- * R1 : SDRC_DLLA_CTRL
- * R2 : SDRC_POWER
- *
- * The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on
- * when we get called, but the DLL probably isn't. We will wait a bit more in
- * case the DPLL isn't quite there yet. The code will wait on DLL for DDR even
- * if in unlocked mode.
- *
- * For less than 242x-ES2.2 upon wake from a sleep mode where the external
- * oscillator was stopped, a timing bug exists where a non-stabilized 12MHz
- * clock can pass into the PRCM can cause problems at DSP and IVA.
- * To work around this the code will switch to the 32kHz source prior to sleep.
- * Post sleep we will shift back to using the DPLL. Apparently,
- * CM_IDLEST_CLKGEN does not reflect the full clock change so you need to wait
- * 3x12MHz + 3x32kHz clocks for a full switch.
- *
- * The DLL load value is not kept in RETENTION or OFF. It needs to be restored
- * at wake
- */
- .align 3
-ENTRY(omap24xx_cpu_suspend)
- stmfd sp!, {r0 - r12, lr} @ save registers on stack
- mov r3, #0x0 @ clear for mcr call
- mcr p15, 0, r3, c7, c10, 4 @ memory barrier, hope SDR/DDR finished
- nop
- nop
- ldr r4, [r2] @ read SDRC_POWER
- orr r4, r4, #0x40 @ enable self refresh on idle req
- mov r5, #0x2000 @ set delay (DPLL relock + DLL relock)
- str r4, [r2] @ make it so
- nop
- mcr p15, 0, r3, c7, c0, 4 @ wait for interrupt
- nop
-loop:
- subs r5, r5, #0x1 @ awake, wait just a bit
- bne loop
-
- /* The DPLL has to be on before we take the DDR out of self refresh */
- bic r4, r4, #0x40 @ now clear self refresh bit.
- str r4, [r2] @ write to SDRC_POWER
- ldr r4, A_SDRC0 @ make a clock happen
- ldr r4, [r4] @ read A_SDRC0
- nop @ start auto refresh only after clk ok
- movs r0, r0 @ see if DDR or SDR
- strne r0, [r1] @ rewrite DLLA to force DLL reload
- addne r1, r1, #0x8 @ move to DLLB
- strne r0, [r1] @ rewrite DLLB to force DLL reload
-
- mov r5, #0x1000
-loop2:
- subs r5, r5, #0x1
- bne loop2
- /* resume*/
- ldmfd sp!, {r0 - r12, pc} @ restore regs and return
-
-A_SDRC0:
- .word A_SDRC0_V
-
-ENTRY(omap24xx_cpu_suspend_sz)
- .word . - omap24xx_cpu_suspend
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index 9e3dbb743e5c..9c9f56ca9142 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -12,7 +12,6 @@
* Added DRA7xxx specific defines - Sricharan R<r.sricharan@ti.com>
*/
-#include "omap24xx.h"
#include "omap34xx.h"
#include "omap44xx.h"
#include "ti81xx.h"
@@ -62,9 +61,6 @@ static inline int soc_is_omap(void)
/*
* Macros to group OMAP into cpu classes.
* These can be used in most places.
- * soc_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
- * soc_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423
- * soc_is_omap243x(): True for OMAP2430
* soc_is_omap343x(): True for OMAP3430
* soc_is_omap443x(): True for OMAP4430
* soc_is_omap446x(): True for OMAP4460
@@ -137,7 +133,6 @@ static inline int is_dra ##subclass ##_ ##package (void) \
return (is_dra ##subclass () && GET_DRA_PACKAGE == id) ? 1 : 0; \
}
-IS_OMAP_CLASS(24xx, 0x24)
IS_OMAP_CLASS(34xx, 0x34)
IS_OMAP_CLASS(44xx, 0x44)
IS_AM_CLASS(35xx, 0x35)
@@ -148,8 +143,6 @@ IS_AM_CLASS(43xx, 0x43)
IS_TI_CLASS(81xx, 0x81)
IS_DRA_CLASS(7xx, 0x7)
-IS_OMAP_SUBCLASS(242x, 0x242)
-IS_OMAP_SUBCLASS(243x, 0x243)
IS_OMAP_SUBCLASS(343x, 0x343)
IS_OMAP_SUBCLASS(363x, 0x363)
IS_OMAP_SUBCLASS(443x, 0x443)
@@ -186,21 +179,6 @@ IS_DRA_SUBCLASS(72x, 0x72)
#define soc_is_dra74x() 0
#define soc_is_dra72x() 0
-#if defined(CONFIG_ARCH_OMAP2)
-# define soc_is_omap24xx() is_omap24xx()
-#else
-# define soc_is_omap24xx() 0
-#endif
-#if defined(CONFIG_SOC_OMAP2420)
-# define soc_is_omap242x() is_omap242x()
-#else
-# define soc_is_omap242x() 0
-#endif
-#if defined(CONFIG_SOC_OMAP2430)
-# define soc_is_omap243x() is_omap243x()
-#else
-# define soc_is_omap243x() 0
-#endif
#if defined(CONFIG_ARCH_OMAP3)
# define soc_is_omap34xx() is_omap34xx()
# define soc_is_omap343x() is_omap343x()
@@ -212,10 +190,6 @@ IS_DRA_SUBCLASS(72x, 0x72)
/*
* Macros to detect individual cpu types.
* These are only rarely needed.
- * soc_is_omap2420(): True for OMAP2420
- * soc_is_omap2422(): True for OMAP2422
- * soc_is_omap2423(): True for OMAP2423
- * soc_is_omap2430(): True for OMAP2430
* soc_is_omap3430(): True for OMAP3430
*/
#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
@@ -226,16 +200,8 @@ static inline int is_omap ##type (void) \
return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
}
-IS_OMAP_TYPE(2420, 0x2420)
-IS_OMAP_TYPE(2422, 0x2422)
-IS_OMAP_TYPE(2423, 0x2423)
-IS_OMAP_TYPE(2430, 0x2430)
IS_OMAP_TYPE(3430, 0x3430)
-#define soc_is_omap2420() 0
-#define soc_is_omap2422() 0
-#define soc_is_omap2423() 0
-#define soc_is_omap2430() 0
#define soc_is_omap3430() 0
#define soc_is_omap3630() 0
#define soc_is_omap5430() 0
@@ -252,17 +218,6 @@ IS_OMAP_TYPE(3430, 0x3430)
#define cpu_class_is_omap1() 0
#define cpu_class_is_omap2() 1
-#if defined(CONFIG_ARCH_OMAP2)
-# undef soc_is_omap2420
-# undef soc_is_omap2422
-# undef soc_is_omap2423
-# undef soc_is_omap2430
-# define soc_is_omap2420() is_omap2420()
-# define soc_is_omap2422() is_omap2422()
-# define soc_is_omap2423() is_omap2423()
-# define soc_is_omap2430() is_omap2430()
-#endif
-
#if defined(CONFIG_ARCH_OMAP3)
# undef soc_is_omap3430
# undef soc_is_ti81xx
@@ -326,13 +281,6 @@ IS_OMAP_TYPE(3430, 0x3430)
#endif
/* Various silicon revisions for omap2 */
-#define OMAP242X_CLASS 0x24200024
-#define OMAP2420_REV_ES1_0 OMAP242X_CLASS
-#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8))
-
-#define OMAP243X_CLASS 0x24300024
-#define OMAP2430_REV_ES1_0 OMAP243X_CLASS
-
#define OMAP343X_CLASS 0x34300034
#define OMAP3430_REV_ES1_0 OMAP343X_CLASS
#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8))
@@ -400,7 +348,6 @@ IS_OMAP_TYPE(3430, 0x3430)
#define DRA722_REV_ES2_0 (DRA7XX_CLASS | (0x22 << 16) | (0x20 << 8))
#define DRA722_REV_ES2_1 (DRA7XX_CLASS | (0x22 << 16) | (0x21 << 8))
-void omap2xxx_check_revision(void);
void omap3xxx_check_revision(void);
void omap4xxx_check_revision(void);
void omap5xxx_check_revision(void);
@@ -484,12 +431,6 @@ level(__##fn);
#define omap_late_initcall_sync(fn) omap_initcall(late_initcall_sync, fn)
/* Legacy defines, these can be removed when users are removed */
-#define cpu_is_omap2420() soc_is_omap2420()
-#define cpu_is_omap2422() soc_is_omap2422()
-#define cpu_is_omap242x() soc_is_omap242x()
-#define cpu_is_omap2430() soc_is_omap2430()
-#define cpu_is_omap243x() soc_is_omap243x()
-#define cpu_is_omap24xx() soc_is_omap24xx()
#define cpu_is_omap3430() soc_is_omap3430()
#define cpu_is_omap343x() soc_is_omap343x()
#define cpu_is_omap34xx() soc_is_omap34xx()
diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c
index 898b011ae8d9..8f980849f201 100644
--- a/arch/arm/mach-omap2/sram.c
+++ b/arch/arm/mach-omap2/sram.c
@@ -28,15 +28,10 @@
#include "sdrc.h"
#include "sram.h"
-#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
#define SRAM_BOOTLOADER_SZ 0x00
-#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048)
-#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050)
-#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058)
-
#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848)
#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850)
#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858)
@@ -120,18 +115,11 @@ static int is_sram_locked(void)
{
if (omap_type() == OMAP2_DEVICE_TYPE_GP) {
/* RAMFW: R/W access to all initiators for all qualifier sets */
- if (cpu_is_omap242x()) {
- writel_relaxed(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
- writel_relaxed(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
- writel_relaxed(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
- }
- if (cpu_is_omap34xx()) {
- writel_relaxed(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
- writel_relaxed(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
- writel_relaxed(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
- writel_relaxed(0x0, OMAP34XX_VA_ADDR_MATCH2);
- writel_relaxed(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
- }
+ writel_relaxed(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
+ writel_relaxed(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
+ writel_relaxed(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
+ writel_relaxed(0x0, OMAP34XX_VA_ADDR_MATCH2);
+ writel_relaxed(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
return 0;
} else
return 1; /* assume locked with no PPA or security driver */
@@ -147,30 +135,17 @@ static void __init omap_detect_sram(void)
{
omap_sram_skip = SRAM_BOOTLOADER_SZ;
if (is_sram_locked()) {
- if (cpu_is_omap34xx()) {
- omap_sram_start = OMAP3_SRAM_PUB_PA;
- if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
- (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
- omap_sram_size = 0x7000; /* 28K */
- omap_sram_skip += SZ_16K;
- } else {
- omap_sram_size = 0x8000; /* 32K */
- }
+ omap_sram_start = OMAP3_SRAM_PUB_PA;
+ if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
+ (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
+ omap_sram_size = 0x7000; /* 28K */
+ omap_sram_skip += SZ_16K;
} else {
- omap_sram_start = OMAP2_SRAM_PUB_PA;
- omap_sram_size = 0x800; /* 2K */
+ omap_sram_size = 0x8000; /* 32K */
}
} else {
- if (cpu_is_omap34xx()) {
- omap_sram_start = OMAP3_SRAM_PA;
- omap_sram_size = 0x10000; /* 64K */
- } else {
- omap_sram_start = OMAP2_SRAM_PA;
- if (cpu_is_omap242x())
- omap_sram_size = 0xa0000; /* 640K */
- else if (cpu_is_omap243x())
- omap_sram_size = 0x10000; /* 64K */
- }
+ omap_sram_start = OMAP3_SRAM_PA;
+ omap_sram_size = 0x10000; /* 64K */
}
}
@@ -181,24 +156,20 @@ static void __init omap2_map_sram(void)
{
unsigned long base;
int pages;
- int cached = 1;
-
- if (cpu_is_omap34xx()) {
- /*
- * SRAM must be marked as non-cached on OMAP3 since the
- * CORE DPLL M2 divider change code (in SRAM) runs with the
- * SDRAM controller disabled, and if it is marked cached,
- * the ARM may attempt to write cache lines back to SDRAM
- * which will cause the system to hang.
- */
- cached = 0;
- }
if (omap_sram_size == 0)
return;
omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE);
- omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, cached);
+ /*
+ * SRAM must be marked as non-cached on OMAP3 since the
+ * CORE DPLL M2 divider change code (in SRAM) runs with the
+ * SDRAM controller disabled, and if it is marked cached,
+ * the ARM may attempt to write cache lines back to SDRAM
+ * which will cause the system to hang.
+ */
+
+ omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, 0);
if (!omap_sram_base) {
pr_err("SRAM: Could not map\n");
return;
@@ -219,78 +190,6 @@ static void __init omap2_map_sram(void)
set_memory_rox(base, pages);
}
-static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-
-void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock)
-{
- BUG_ON(!_omap2_sram_ddr_init);
- _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
- base_cs, force_unlock);
-}
-
-static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
- u32 mem_type);
-
-void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
-{
- BUG_ON(!_omap2_sram_reprogram_sdrc);
- _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
-}
-
-static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-
-u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
-{
- BUG_ON(!_omap2_set_prcm);
- return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
-}
-
-#ifdef CONFIG_SOC_OMAP2420
-static int __init omap242x_sram_init(void)
-{
- _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
- omap242x_sram_ddr_init_sz);
-
- _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
- omap242x_sram_reprogram_sdrc_sz);
-
- _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
- omap242x_sram_set_prcm_sz);
-
- return 0;
-}
-#else
-static inline int omap242x_sram_init(void)
-{
- return 0;
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-static int __init omap243x_sram_init(void)
-{
- _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
- omap243x_sram_ddr_init_sz);
-
- _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
- omap243x_sram_reprogram_sdrc_sz);
-
- _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
- omap243x_sram_set_prcm_sz);
-
- return 0;
-}
-#else
-static inline int omap243x_sram_init(void)
-{
- return 0;
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-
void omap3_sram_restore_context(void)
{
omap_sram_reset();
@@ -303,24 +202,12 @@ static inline int omap34xx_sram_init(void)
omap3_sram_restore_context();
return 0;
}
-#else
-static inline int omap34xx_sram_init(void)
-{
- return 0;
-}
-#endif /* CONFIG_ARCH_OMAP3 */
int __init omap_sram_init(void)
{
omap_detect_sram();
omap2_map_sram();
-
- if (cpu_is_omap242x())
- omap242x_sram_init();
- else if (cpu_is_omap2430())
- omap243x_sram_init();
- else if (cpu_is_omap34xx())
- omap34xx_sram_init();
+ omap34xx_sram_init();
return 0;
}
diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h
index 030cabc39821..2db2c4598cdb 100644
--- a/arch/arm/mach-omap2/sram.h
+++ b/arch/arm/mach-omap2/sram.h
@@ -5,43 +5,12 @@
#ifndef __ASSEMBLY__
-extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type);
-extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-
extern void omap3_sram_restore_context(void);
extern int __init omap_sram_init(void);
extern void *omap_sram_push(void *funcp, unsigned long size);
-extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern unsigned long omap242x_sram_ddr_init_sz;
-
-extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
- int bypass);
-extern unsigned long omap242x_sram_set_prcm_sz;
-
-extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type);
-extern unsigned long omap242x_sram_reprogram_sdrc_sz;
-
-
-extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern unsigned long omap243x_sram_ddr_init_sz;
-
-extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
- int bypass);
-extern unsigned long omap243x_sram_set_prcm_sz;
-
-extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type);
-extern unsigned long omap243x_sram_reprogram_sdrc_sz;
-
#ifdef CONFIG_PM
extern void omap_push_sram_idle(void);
#else
@@ -54,5 +23,4 @@ static inline void omap_push_sram_idle(void) {}
* OMAP2+: define the SRAM PA addresses.
* Used by the SRAM management code and the idle sleep code.
*/
-#define OMAP2_SRAM_PA 0x40200000
#define OMAP3_SRAM_PA 0x40200000
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
deleted file mode 100644
index 92ef21ac2ac1..000000000000
--- a/arch/arm/mach-omap2/sram242x.S
+++ /dev/null
@@ -1,317 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * linux/arch/arm/mach-omap2/sram242x.S
- *
- * Omap2 specific functions that need to be run in internal SRAM
- *
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * Richard Woodruff notes that any changes to this code must be carefully
- * audited and tested to ensure that they don't cause a TLB miss while
- * the SDRAM is inaccessible. Such a situation will crash the system
- * since it will cause the ARM MMU to attempt to walk the page tables.
- * These crashes may be intermittent.
- */
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-
-#include "soc.h"
-#include "iomap.h"
-#include "prm2xxx.h"
-#include "cm2xxx.h"
-#include "sdrc.h"
-
- .text
-
- .align 3
-ENTRY(omap242x_sram_ddr_init)
- stmfd sp!, {r0 - r12, lr} @ save registers on stack
-
- mov r12, r2 @ capture CS1 vs CS0
- mov r8, r3 @ capture force parameter
-
- /* frequency shift down */
- ldr r2, omap242x_sdi_cm_clksel2_pll @ get address of dpllout reg
- mov r3, #0x1 @ value for 1x operation
- str r3, [r2] @ go to L1-freq operation
-
- /* voltage shift down */
- mov r9, #0x1 @ set up for L1 voltage call
- bl voltage_shift @ go drop voltage
-
- /* dll lock mode */
- ldr r11, omap242x_sdi_sdrc_dlla_ctrl @ addr of dlla ctrl
- ldr r10, [r11] @ get current val
- cmp r12, #0x1 @ cs1 base (2422 es2.05/1)
- addeq r11, r11, #0x8 @ if cs1 base, move to DLLB
- mvn r9, #0x4 @ mask to get clear bit2
- and r10, r10, r9 @ clear bit2 for lock mode.
- orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos)
- orr r10, r10, #0x2 @ 90 degree phase for all below 133MHz
- str r10, [r11] @ commit to DLLA_CTRL
- bl i_dll_wait @ wait for dll to lock
-
- /* get dll value */
- add r11, r11, #0x4 @ get addr of status reg
- ldr r10, [r11] @ get locked value
-
- /* voltage shift up */
- mov r9, #0x0 @ shift back to L0-voltage
- bl voltage_shift @ go raise voltage
-
- /* frequency shift up */
- mov r3, #0x2 @ value for 2x operation
- str r3, [r2] @ go to L0-freq operation
-
- /* reset entry mode for dllctrl */
- sub r11, r11, #0x4 @ move from status to ctrl
- cmp r12, #0x1 @ normalize if cs1 based
- subeq r11, r11, #0x8 @ possibly back to DLLA
- cmp r8, #0x1 @ if forced unlock exit
- orreq r1, r1, #0x4 @ make sure exit with unlocked value
- str r1, [r11] @ restore DLLA_CTRL high value
- add r11, r11, #0x8 @ move to DLLB_CTRL addr
- str r1, [r11] @ set value DLLB_CTRL
- bl i_dll_wait @ wait for possible lock
-
- /* set up for return, DDR should be good */
- str r10, [r0] @ write dll_status and return counter
- ldmfd sp!, {r0 - r12, pc} @ restore regs and return
-
- /* ensure the DLL has relocked */
-i_dll_wait:
- mov r4, #0x800 @ delay DLL relock, min 0x400 L3 clocks
-i_dll_delay:
- subs r4, r4, #0x1
- bne i_dll_delay
- ret lr
-
- /*
- * shift up or down voltage, use R9 as input to tell level.
- * wait for it to finish, use 32k sync counter, 1tick=31uS.
- */
-voltage_shift:
- ldr r4, omap242x_sdi_prcm_voltctrl @ get addr of volt ctrl.
- ldr r5, [r4] @ get value.
- ldr r6, prcm_mask_val @ get value of mask
- and r5, r5, r6 @ apply mask to clear bits
- orr r5, r5, r9 @ bulld value for L0/L1-volt operation.
- str r5, [r4] @ set up for change.
- mov r3, #0x4000 @ get val for force
- orr r5, r5, r3 @ build value for force
- str r5, [r4] @ Force transition to L1
-
- ldr r3, omap242x_sdi_timer_32ksynct_cr @ get addr of counter
- ldr r5, [r3] @ get value
- add r5, r5, #0x3 @ give it at most 93uS
-volt_delay:
- ldr r7, [r3] @ get timer value
- cmp r5, r7 @ time up?
- bhi volt_delay @ not yet->branch
- ret lr @ back to caller.
-
-omap242x_sdi_cm_clksel2_pll:
- .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-omap242x_sdi_sdrc_dlla_ctrl:
- .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-omap242x_sdi_prcm_voltctrl:
- .word OMAP2420_PRCM_VOLTCTRL
-prcm_mask_val:
- .word 0xFFFF3FFC
-omap242x_sdi_timer_32ksynct_cr:
- .word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
-ENTRY(omap242x_sram_ddr_init_sz)
- .word . - omap242x_sram_ddr_init
-
-/*
- * Reprograms memory timings.
- * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
- * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
- */
- .align 3
-ENTRY(omap242x_sram_reprogram_sdrc)
- stmfd sp!, {r0 - r10, lr} @ save registers on stack
- mov r3, #0x0 @ clear for mrc call
- mcr p15, 0, r3, c7, c10, 4 @ memory barrier, finish ARM SDR/DDR
- nop
- nop
- ldr r6, omap242x_srs_sdrc_rfr_ctrl @ get addr of refresh reg
- ldr r5, [r6] @ get value
- mov r5, r5, lsr #8 @ isolate rfr field and drop burst
-
- cmp r0, #0x1 @ going to half speed?
- movne r9, #0x0 @ if up set flag up for pre up, hi volt
-
- blne voltage_shift_c @ adjust voltage
-
- cmp r0, #0x1 @ going to half speed (post branch link)
- moveq r5, r5, lsr #1 @ divide by 2 if to half
- movne r5, r5, lsl #1 @ mult by 2 if to full
- mov r5, r5, lsl #8 @ put rfr field back into place
- add r5, r5, #0x1 @ turn on burst of 1
- ldr r4, omap242x_srs_cm_clksel2_pll @ get address of out reg
- ldr r3, [r4] @ get curr value
- orr r3, r3, #0x3
- bic r3, r3, #0x3 @ clear lower bits
- orr r3, r3, r0 @ new state value
- str r3, [r4] @ set new state (pll/x, x=1 or 2)
- nop
- nop
-
- moveq r9, #0x1 @ if speed down, post down, drop volt
- bleq voltage_shift_c
-
- mcr p15, 0, r3, c7, c10, 4 @ memory barrier
- str r5, [r6] @ set new RFR_1 value
- add r6, r6, #0x30 @ get RFR_2 addr
- str r5, [r6] @ set RFR_2
- nop
- cmp r2, #0x1 @ (SDR or DDR) do we need to adjust DLL
- bne freq_out @ leave if SDR, no DLL function
-
- /* With DDR, we need to take care of the DLL for the frequency change */
- ldr r2, omap242x_srs_sdrc_dlla_ctrl @ addr of dlla ctrl
- str r1, [r2] @ write out new SDRC_DLLA_CTRL
- add r2, r2, #0x8 @ addr to SDRC_DLLB_CTRL
- str r1, [r2] @ commit to SDRC_DLLB_CTRL
- mov r1, #0x2000 @ wait DLL relock, min 0x400 L3 clocks
-dll_wait:
- subs r1, r1, #0x1
- bne dll_wait
-freq_out:
- ldmfd sp!, {r0 - r10, pc} @ restore regs and return
-
- /*
- * shift up or down voltage, use R9 as input to tell level.
- * wait for it to finish, use 32k sync counter, 1tick=31uS.
- */
-voltage_shift_c:
- ldr r10, omap242x_srs_prcm_voltctrl @ get addr of volt ctrl
- ldr r8, [r10] @ get value
- ldr r7, ddr_prcm_mask_val @ get value of mask
- and r8, r8, r7 @ apply mask to clear bits
- orr r8, r8, r9 @ bulld value for L0/L1-volt operation.
- str r8, [r10] @ set up for change.
- mov r7, #0x4000 @ get val for force
- orr r8, r8, r7 @ build value for force
- str r8, [r10] @ Force transition to L1
-
- ldr r10, omap242x_srs_timer_32ksynct @ get addr of counter
- ldr r8, [r10] @ get value
- add r8, r8, #0x2 @ give it at most 62uS (min 31+)
-volt_delay_c:
- ldr r7, [r10] @ get timer value
- cmp r8, r7 @ time up?
- bhi volt_delay_c @ not yet->branch
- ret lr @ back to caller
-
-omap242x_srs_cm_clksel2_pll:
- .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-omap242x_srs_sdrc_dlla_ctrl:
- .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-omap242x_srs_sdrc_rfr_ctrl:
- .word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap242x_srs_prcm_voltctrl:
- .word OMAP2420_PRCM_VOLTCTRL
-ddr_prcm_mask_val:
- .word 0xFFFF3FFC
-omap242x_srs_timer_32ksynct:
- .word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
-
-ENTRY(omap242x_sram_reprogram_sdrc_sz)
- .word . - omap242x_sram_reprogram_sdrc
-
-/*
- * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
- */
- .align 3
-ENTRY(omap242x_sram_set_prcm)
- stmfd sp!, {r0-r12, lr} @ regs to stack
- adr r4, pbegin @ addr of preload start
- adr r8, pend @ addr of preload end
- mcrr p15, 1, r8, r4, c12 @ preload into icache
-pbegin:
- /* move into fast relock bypass */
- ldr r8, omap242x_ssp_pll_ctl @ get addr
- ldr r5, [r8] @ get val
- mvn r6, #0x3 @ clear mask
- and r5, r5, r6 @ clear field
- orr r7, r5, #0x2 @ fast relock val
- str r7, [r8] @ go to fast relock
- ldr r4, omap242x_ssp_pll_stat @ addr of stat
-block:
- /* wait for bypass */
- ldr r8, [r4] @ stat value
- and r8, r8, #0x3 @ mask for stat
- cmp r8, #0x1 @ there yet
- bne block @ loop if not
-
- /* set new dpll dividers _after_ in bypass */
- ldr r4, omap242x_ssp_pll_div @ get addr
- str r0, [r4] @ set dpll ctrl val
-
- ldr r4, omap242x_ssp_set_config @ get addr
- mov r8, #1 @ valid cfg msk
- str r8, [r4] @ make dividers take
-
- mov r4, #100 @ dead spin a bit
-wait_a_bit:
- subs r4, r4, #1 @ dec loop
- bne wait_a_bit @ delay done?
-
- /* check if staying in bypass */
- cmp r2, #0x1 @ stay in bypass?
- beq pend @ jump over dpll relock
-
- /* relock DPLL with new vals */
- ldr r5, omap242x_ssp_pll_stat @ get addr
- ldr r4, omap242x_ssp_pll_ctl @ get addr
- orr r8, r7, #0x3 @ val for lock dpll
- str r8, [r4] @ set val
- mov r0, #1000 @ dead spin a bit
-wait_more:
- subs r0, r0, #1 @ dec loop
- bne wait_more @ delay done?
-wait_lock:
- ldr r8, [r5] @ get lock val
- and r8, r8, #3 @ isolate field
- cmp r8, #2 @ locked?
- bne wait_lock @ wait if not
-pend:
- /* update memory timings & briefly lock dll */
- ldr r4, omap242x_ssp_sdrc_rfr @ get addr
- str r1, [r4] @ update refresh timing
- ldr r11, omap242x_ssp_dlla_ctrl @ get addr of DLLA ctrl
- ldr r10, [r11] @ get current val
- mvn r9, #0x4 @ mask to get clear bit2
- and r10, r10, r9 @ clear bit2 for lock mode
- orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos)
- str r10, [r11] @ commit to DLLA_CTRL
- add r11, r11, #0x8 @ move to dllb
- str r10, [r11] @ hit DLLB also
-
- mov r4, #0x800 @ relock time (min 0x400 L3 clocks)
-wait_dll_lock:
- subs r4, r4, #0x1
- bne wait_dll_lock
- nop
- ldmfd sp!, {r0-r12, pc} @ restore regs and return
-
-omap242x_ssp_set_config:
- .word OMAP2420_PRCM_CLKCFG_CTRL
-omap242x_ssp_pll_ctl:
- .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN)
-omap242x_ssp_pll_stat:
- .word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST)
-omap242x_ssp_pll_div:
- .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
-omap242x_ssp_sdrc_rfr:
- .word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap242x_ssp_dlla_ctrl:
- .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-
-ENTRY(omap242x_sram_set_prcm_sz)
- .word . - omap242x_sram_set_prcm
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
deleted file mode 100644
index faf03b7f08f5..000000000000
--- a/arch/arm/mach-omap2/sram243x.S
+++ /dev/null
@@ -1,317 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * linux/arch/arm/mach-omap2/sram243x.S
- *
- * Omap2 specific functions that need to be run in internal SRAM
- *
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * Richard Woodruff notes that any changes to this code must be carefully
- * audited and tested to ensure that they don't cause a TLB miss while
- * the SDRAM is inaccessible. Such a situation will crash the system
- * since it will cause the ARM MMU to attempt to walk the page tables.
- * These crashes may be intermittent.
- */
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-
-#include "soc.h"
-#include "iomap.h"
-#include "prm2xxx.h"
-#include "cm2xxx.h"
-#include "sdrc.h"
-
- .text
-
- .align 3
-ENTRY(omap243x_sram_ddr_init)
- stmfd sp!, {r0 - r12, lr} @ save registers on stack
-
- mov r12, r2 @ capture CS1 vs CS0
- mov r8, r3 @ capture force parameter
-
- /* frequency shift down */
- ldr r2, omap243x_sdi_cm_clksel2_pll @ get address of dpllout reg
- mov r3, #0x1 @ value for 1x operation
- str r3, [r2] @ go to L1-freq operation
-
- /* voltage shift down */
- mov r9, #0x1 @ set up for L1 voltage call
- bl voltage_shift @ go drop voltage
-
- /* dll lock mode */
- ldr r11, omap243x_sdi_sdrc_dlla_ctrl @ addr of dlla ctrl
- ldr r10, [r11] @ get current val
- cmp r12, #0x1 @ cs1 base (2422 es2.05/1)
- addeq r11, r11, #0x8 @ if cs1 base, move to DLLB
- mvn r9, #0x4 @ mask to get clear bit2
- and r10, r10, r9 @ clear bit2 for lock mode.
- orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos)
- orr r10, r10, #0x2 @ 90 degree phase for all below 133MHz
- str r10, [r11] @ commit to DLLA_CTRL
- bl i_dll_wait @ wait for dll to lock
-
- /* get dll value */
- add r11, r11, #0x4 @ get addr of status reg
- ldr r10, [r11] @ get locked value
-
- /* voltage shift up */
- mov r9, #0x0 @ shift back to L0-voltage
- bl voltage_shift @ go raise voltage
-
- /* frequency shift up */
- mov r3, #0x2 @ value for 2x operation
- str r3, [r2] @ go to L0-freq operation
-
- /* reset entry mode for dllctrl */
- sub r11, r11, #0x4 @ move from status to ctrl
- cmp r12, #0x1 @ normalize if cs1 based
- subeq r11, r11, #0x8 @ possibly back to DLLA
- cmp r8, #0x1 @ if forced unlock exit
- orreq r1, r1, #0x4 @ make sure exit with unlocked value
- str r1, [r11] @ restore DLLA_CTRL high value
- add r11, r11, #0x8 @ move to DLLB_CTRL addr
- str r1, [r11] @ set value DLLB_CTRL
- bl i_dll_wait @ wait for possible lock
-
- /* set up for return, DDR should be good */
- str r10, [r0] @ write dll_status and return counter
- ldmfd sp!, {r0 - r12, pc} @ restore regs and return
-
- /* ensure the DLL has relocked */
-i_dll_wait:
- mov r4, #0x800 @ delay DLL relock, min 0x400 L3 clocks
-i_dll_delay:
- subs r4, r4, #0x1
- bne i_dll_delay
- ret lr
-
- /*
- * shift up or down voltage, use R9 as input to tell level.
- * wait for it to finish, use 32k sync counter, 1tick=31uS.
- */
-voltage_shift:
- ldr r4, omap243x_sdi_prcm_voltctrl @ get addr of volt ctrl.
- ldr r5, [r4] @ get value.
- ldr r6, prcm_mask_val @ get value of mask
- and r5, r5, r6 @ apply mask to clear bits
- orr r5, r5, r9 @ bulld value for L0/L1-volt operation.
- str r5, [r4] @ set up for change.
- mov r3, #0x4000 @ get val for force
- orr r5, r5, r3 @ build value for force
- str r5, [r4] @ Force transition to L1
-
- ldr r3, omap243x_sdi_timer_32ksynct_cr @ get addr of counter
- ldr r5, [r3] @ get value
- add r5, r5, #0x3 @ give it at most 93uS
-volt_delay:
- ldr r7, [r3] @ get timer value
- cmp r5, r7 @ time up?
- bhi volt_delay @ not yet->branch
- ret lr @ back to caller.
-
-omap243x_sdi_cm_clksel2_pll:
- .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-omap243x_sdi_sdrc_dlla_ctrl:
- .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-omap243x_sdi_prcm_voltctrl:
- .word OMAP2430_PRCM_VOLTCTRL
-prcm_mask_val:
- .word 0xFFFF3FFC
-omap243x_sdi_timer_32ksynct_cr:
- .word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
-ENTRY(omap243x_sram_ddr_init_sz)
- .word . - omap243x_sram_ddr_init
-
-/*
- * Reprograms memory timings.
- * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
- * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
- */
- .align 3
-ENTRY(omap243x_sram_reprogram_sdrc)
- stmfd sp!, {r0 - r10, lr} @ save registers on stack
- mov r3, #0x0 @ clear for mrc call
- mcr p15, 0, r3, c7, c10, 4 @ memory barrier, finish ARM SDR/DDR
- nop
- nop
- ldr r6, omap243x_srs_sdrc_rfr_ctrl @ get addr of refresh reg
- ldr r5, [r6] @ get value
- mov r5, r5, lsr #8 @ isolate rfr field and drop burst
-
- cmp r0, #0x1 @ going to half speed?
- movne r9, #0x0 @ if up set flag up for pre up, hi volt
-
- blne voltage_shift_c @ adjust voltage
-
- cmp r0, #0x1 @ going to half speed (post branch link)
- moveq r5, r5, lsr #1 @ divide by 2 if to half
- movne r5, r5, lsl #1 @ mult by 2 if to full
- mov r5, r5, lsl #8 @ put rfr field back into place
- add r5, r5, #0x1 @ turn on burst of 1
- ldr r4, omap243x_srs_cm_clksel2_pll @ get address of out reg
- ldr r3, [r4] @ get curr value
- orr r3, r3, #0x3
- bic r3, r3, #0x3 @ clear lower bits
- orr r3, r3, r0 @ new state value
- str r3, [r4] @ set new state (pll/x, x=1 or 2)
- nop
- nop
-
- moveq r9, #0x1 @ if speed down, post down, drop volt
- bleq voltage_shift_c
-
- mcr p15, 0, r3, c7, c10, 4 @ memory barrier
- str r5, [r6] @ set new RFR_1 value
- add r6, r6, #0x30 @ get RFR_2 addr
- str r5, [r6] @ set RFR_2
- nop
- cmp r2, #0x1 @ (SDR or DDR) do we need to adjust DLL
- bne freq_out @ leave if SDR, no DLL function
-
- /* With DDR, we need to take care of the DLL for the frequency change */
- ldr r2, omap243x_srs_sdrc_dlla_ctrl @ addr of dlla ctrl
- str r1, [r2] @ write out new SDRC_DLLA_CTRL
- add r2, r2, #0x8 @ addr to SDRC_DLLB_CTRL
- str r1, [r2] @ commit to SDRC_DLLB_CTRL
- mov r1, #0x2000 @ wait DLL relock, min 0x400 L3 clocks
-dll_wait:
- subs r1, r1, #0x1
- bne dll_wait
-freq_out:
- ldmfd sp!, {r0 - r10, pc} @ restore regs and return
-
- /*
- * shift up or down voltage, use R9 as input to tell level.
- * wait for it to finish, use 32k sync counter, 1tick=31uS.
- */
-voltage_shift_c:
- ldr r10, omap243x_srs_prcm_voltctrl @ get addr of volt ctrl
- ldr r8, [r10] @ get value
- ldr r7, ddr_prcm_mask_val @ get value of mask
- and r8, r8, r7 @ apply mask to clear bits
- orr r8, r8, r9 @ bulld value for L0/L1-volt operation.
- str r8, [r10] @ set up for change.
- mov r7, #0x4000 @ get val for force
- orr r8, r8, r7 @ build value for force
- str r8, [r10] @ Force transition to L1
-
- ldr r10, omap243x_srs_timer_32ksynct @ get addr of counter
- ldr r8, [r10] @ get value
- add r8, r8, #0x2 @ give it at most 62uS (min 31+)
-volt_delay_c:
- ldr r7, [r10] @ get timer value
- cmp r8, r7 @ time up?
- bhi volt_delay_c @ not yet->branch
- ret lr @ back to caller
-
-omap243x_srs_cm_clksel2_pll:
- .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-omap243x_srs_sdrc_dlla_ctrl:
- .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-omap243x_srs_sdrc_rfr_ctrl:
- .word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap243x_srs_prcm_voltctrl:
- .word OMAP2430_PRCM_VOLTCTRL
-ddr_prcm_mask_val:
- .word 0xFFFF3FFC
-omap243x_srs_timer_32ksynct:
- .word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
-
-ENTRY(omap243x_sram_reprogram_sdrc_sz)
- .word . - omap243x_sram_reprogram_sdrc
-
-/*
- * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
- */
- .align 3
-ENTRY(omap243x_sram_set_prcm)
- stmfd sp!, {r0-r12, lr} @ regs to stack
- adr r4, pbegin @ addr of preload start
- adr r8, pend @ addr of preload end
- mcrr p15, 1, r8, r4, c12 @ preload into icache
-pbegin:
- /* move into fast relock bypass */
- ldr r8, omap243x_ssp_pll_ctl @ get addr
- ldr r5, [r8] @ get val
- mvn r6, #0x3 @ clear mask
- and r5, r5, r6 @ clear field
- orr r7, r5, #0x2 @ fast relock val
- str r7, [r8] @ go to fast relock
- ldr r4, omap243x_ssp_pll_stat @ addr of stat
-block:
- /* wait for bypass */
- ldr r8, [r4] @ stat value
- and r8, r8, #0x3 @ mask for stat
- cmp r8, #0x1 @ there yet
- bne block @ loop if not
-
- /* set new dpll dividers _after_ in bypass */
- ldr r4, omap243x_ssp_pll_div @ get addr
- str r0, [r4] @ set dpll ctrl val
-
- ldr r4, omap243x_ssp_set_config @ get addr
- mov r8, #1 @ valid cfg msk
- str r8, [r4] @ make dividers take
-
- mov r4, #100 @ dead spin a bit
-wait_a_bit:
- subs r4, r4, #1 @ dec loop
- bne wait_a_bit @ delay done?
-
- /* check if staying in bypass */
- cmp r2, #0x1 @ stay in bypass?
- beq pend @ jump over dpll relock
-
- /* relock DPLL with new vals */
- ldr r5, omap243x_ssp_pll_stat @ get addr
- ldr r4, omap243x_ssp_pll_ctl @ get addr
- orr r8, r7, #0x3 @ val for lock dpll
- str r8, [r4] @ set val
- mov r0, #1000 @ dead spin a bit
-wait_more:
- subs r0, r0, #1 @ dec loop
- bne wait_more @ delay done?
-wait_lock:
- ldr r8, [r5] @ get lock val
- and r8, r8, #3 @ isolate field
- cmp r8, #2 @ locked?
- bne wait_lock @ wait if not
-pend:
- /* update memory timings & briefly lock dll */
- ldr r4, omap243x_ssp_sdrc_rfr @ get addr
- str r1, [r4] @ update refresh timing
- ldr r11, omap243x_ssp_dlla_ctrl @ get addr of DLLA ctrl
- ldr r10, [r11] @ get current val
- mvn r9, #0x4 @ mask to get clear bit2
- and r10, r10, r9 @ clear bit2 for lock mode
- orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos)
- str r10, [r11] @ commit to DLLA_CTRL
- add r11, r11, #0x8 @ move to dllb
- str r10, [r11] @ hit DLLB also
-
- mov r4, #0x800 @ relock time (min 0x400 L3 clocks)
-wait_dll_lock:
- subs r4, r4, #0x1
- bne wait_dll_lock
- nop
- ldmfd sp!, {r0-r12, pc} @ restore regs and return
-
-omap243x_ssp_set_config:
- .word OMAP2430_PRCM_CLKCFG_CTRL
-omap243x_ssp_pll_ctl:
- .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN)
-omap243x_ssp_pll_stat:
- .word OMAP2430_CM_REGADDR(PLL_MOD, CM_IDLEST)
-omap243x_ssp_pll_div:
- .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
-omap243x_ssp_sdrc_rfr:
- .word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap243x_ssp_dlla_ctrl:
- .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-
-ENTRY(omap243x_sram_set_prcm_sz)
- .word . - omap243x_sram_set_prcm
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
deleted file mode 100644
index b46c254c2bc4..000000000000
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ /dev/null
@@ -1,217 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap2/usb-tusb6010.c
- *
- * Copyright (C) 2006 Nokia Corporation
- */
-
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/export.h>
-#include <linux/platform_data/usb-omap.h>
-
-#include <linux/usb/musb.h>
-
-#include "usb-tusb6010.h"
-#include "gpmc.h"
-
-static u8 async_cs, sync_cs;
-static unsigned refclk_psec;
-
-static struct gpmc_settings tusb_async = {
- .wait_on_read = true,
- .wait_on_write = true,
- .device_width = GPMC_DEVWIDTH_16BIT,
- .mux_add_data = GPMC_MUX_AD,
-};
-
-static struct gpmc_settings tusb_sync = {
- .burst_read = true,
- .burst_write = true,
- .sync_read = true,
- .sync_write = true,
- .wait_on_read = true,
- .wait_on_write = true,
- .burst_len = GPMC_BURST_16,
- .device_width = GPMC_DEVWIDTH_16BIT,
- .mux_add_data = GPMC_MUX_AD,
-};
-
-/* NOTE: timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */
-
-static int tusb_set_async_mode(unsigned sysclk_ps)
-{
- struct gpmc_device_timings dev_t;
- struct gpmc_timings t;
- unsigned t_acsnh_advnh = sysclk_ps + 3000;
-
- memset(&dev_t, 0, sizeof(dev_t));
-
- dev_t.t_ceasu = 8 * 1000;
- dev_t.t_avdasu = t_acsnh_advnh - 7000;
- dev_t.t_ce_avd = 1000;
- dev_t.t_avdp_r = t_acsnh_advnh;
- dev_t.t_oeasu = t_acsnh_advnh + 1000;
- dev_t.t_oe = 300;
- dev_t.t_cez_r = 7000;
- dev_t.t_cez_w = dev_t.t_cez_r;
- dev_t.t_avdp_w = t_acsnh_advnh;
- dev_t.t_weasu = t_acsnh_advnh + 1000;
- dev_t.t_wpl = 300;
- dev_t.cyc_aavdh_we = 1;
-
- gpmc_calc_timings(&t, &tusb_async, &dev_t);
-
- return gpmc_cs_set_timings(async_cs, &t, &tusb_async);
-}
-
-static int tusb_set_sync_mode(unsigned sysclk_ps)
-{
- struct gpmc_device_timings dev_t;
- struct gpmc_timings t;
- unsigned t_scsnh_advnh = sysclk_ps + 3000;
-
- memset(&dev_t, 0, sizeof(dev_t));
-
- dev_t.clk = 11100;
- dev_t.t_bacc = 1000;
- dev_t.t_ces = 1000;
- dev_t.t_ceasu = 8 * 1000;
- dev_t.t_avdasu = t_scsnh_advnh - 7000;
- dev_t.t_ce_avd = 1000;
- dev_t.t_avdp_r = t_scsnh_advnh;
- dev_t.cyc_aavdh_oe = 3;
- dev_t.cyc_oe = 5;
- dev_t.t_ce_rdyz = 7000;
- dev_t.t_avdp_w = t_scsnh_advnh;
- dev_t.cyc_aavdh_we = 3;
- dev_t.cyc_wpl = 6;
-
- gpmc_calc_timings(&t, &tusb_sync, &dev_t);
-
- return gpmc_cs_set_timings(sync_cs, &t, &tusb_sync);
-}
-
-/* tusb driver calls this when it changes the chip's clocking */
-static int tusb6010_platform_retime(unsigned is_refclk)
-{
- static const char error[] =
- KERN_ERR "tusb6010 %s retime error %d\n";
-
- unsigned sysclk_ps;
- int status;
-
- if (!refclk_psec)
- return -ENODEV;
-
- sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;
-
- status = tusb_set_async_mode(sysclk_ps);
- if (status < 0) {
- printk(error, "async", status);
- goto done;
- }
- status = tusb_set_sync_mode(sysclk_ps);
- if (status < 0)
- printk(error, "sync", status);
-done:
- return status;
-}
-
-static struct resource tusb_resources[] = {
- /* Order is significant! The start/end fields
- * are updated during setup..
- */
- { /* Asynchronous access */
- .flags = IORESOURCE_MEM,
- },
- { /* Synchronous access */
- .flags = IORESOURCE_MEM,
- },
-};
-
-static u64 tusb_dmamask = ~(u32)0;
-
-static struct platform_device tusb_device = {
- .name = "musb-tusb",
- .id = -1,
- .dev = {
- .dma_mask = &tusb_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(tusb_resources),
- .resource = tusb_resources,
-};
-
-
-/* this may be called only from board-*.c setup code */
-int __init tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
- unsigned int ps_refclk, unsigned int waitpin,
- unsigned int async, unsigned int sync,
- unsigned int dmachan)
-{
- int status;
- static char error[] __initdata =
- KERN_ERR "tusb6010 init error %d, %d\n";
-
- /* ASYNC region, primarily for PIO */
- status = gpmc_cs_request(async, SZ_16M, (unsigned long *)
- &tusb_resources[0].start);
- if (status < 0) {
- printk(error, 1, status);
- return status;
- }
- tusb_resources[0].end = tusb_resources[0].start + 0x9ff;
- tusb_async.wait_pin = waitpin;
- async_cs = async;
-
- status = gpmc_cs_program_settings(async_cs, &tusb_async);
- if (status < 0)
- return status;
-
- /* SYNC region, primarily for DMA */
- status = gpmc_cs_request(sync, SZ_16M, (unsigned long *)
- &tusb_resources[1].start);
- if (status < 0) {
- printk(error, 2, status);
- return status;
- }
- tusb_resources[1].end = tusb_resources[1].start + 0x9ff;
- tusb_sync.wait_pin = waitpin;
- sync_cs = sync;
-
- status = gpmc_cs_program_settings(sync_cs, &tusb_sync);
- if (status < 0)
- return status;
-
- /* set up memory timings ... can speed them up later */
- if (!ps_refclk) {
- printk(error, 4, status);
- return -ENODEV;
- }
- refclk_psec = ps_refclk;
- status = tusb6010_platform_retime(1);
- if (status < 0) {
- printk(error, 5, status);
- return status;
- }
-
- /* finish device setup ... */
- if (!data) {
- printk(error, 6, status);
- return -ENODEV;
- }
- tusb_device.dev.platform_data = data;
-
- /* so far so good ... register the device */
- status = platform_device_register(&tusb_device);
- if (status < 0) {
- printk(error, 7, status);
- return status;
- }
- return 0;
-}
diff --git a/arch/arm/mach-omap2/usb-tusb6010.h b/arch/arm/mach-omap2/usb-tusb6010.h
deleted file mode 100644
index d210ff6238c2..000000000000
--- a/arch/arm/mach-omap2/usb-tusb6010.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifndef __USB_TUSB6010_H
-#define __USB_TUSB6010_H
-
-extern int __init tusb6010_setup_interface(
- struct musb_hdrc_platform_data *data,
- unsigned int ps_refclk, unsigned int waitpin,
- unsigned int async_cs, unsigned int sync_cs,
- unsigned int dmachan);
-
-#endif /* __USB_TUSB6010_H */
diff --git a/arch/arm/mach-omap2/voltagedomains2xxx_data.c b/arch/arm/mach-omap2/voltagedomains2xxx_data.c
deleted file mode 100644
index 9bc116fe3ba9..000000000000
--- a/arch/arm/mach-omap2/voltagedomains2xxx_data.c
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * OMAP3 voltage domain data
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include "voltage.h"
-
-static struct voltagedomain omap2_voltdm_core = {
- .name = "core",
-};
-
-static struct voltagedomain omap2_voltdm_wkup = {
- .name = "wakeup",
-};
-
-static struct voltagedomain *voltagedomains_omap2[] __initdata = {
- &omap2_voltdm_core,
- &omap2_voltdm_wkup,
- NULL,
-};
-
-void __init omap2xxx_voltagedomains_init(void)
-{
- voltdm_init(voltagedomains_omap2);
-}
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 0189dfdcbbe1..a383ff8f446c 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -337,7 +337,7 @@ config CRYPTO_DEV_OMAP_SHAM
config CRYPTO_DEV_OMAP_AES
tristate "Support for OMAP AES hw engine"
- depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP2PLUS
+ depends on ARCH_OMAP3 || ARCH_OMAP2PLUS
select CRYPTO_AES
select CRYPTO_SKCIPHER
select CRYPTO_ENGINE
diff --git a/drivers/media/platform/ti/omap/Kconfig b/drivers/media/platform/ti/omap/Kconfig
index a9dbe1097775..c41812b324ad 100644
--- a/drivers/media/platform/ti/omap/Kconfig
+++ b/drivers/media/platform/ti/omap/Kconfig
@@ -9,9 +9,9 @@ config VIDEO_OMAP2_VOUT
depends on V4L_PLATFORM_DRIVERS
depends on MMU
depends on FB_OMAP2 || (COMPILE_TEST && FB_OMAP2=n)
- depends on ARCH_OMAP2 || ARCH_OMAP3 || COMPILE_TEST
+ depends on ARCH_OMAP3 || COMPILE_TEST
depends on VIDEO_DEV
select VIDEOBUF2_DMA_CONTIG
- select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3
+ select OMAP2_VRFB if ARCH_OMAP3
help
V4L2 Display driver support for OMAP2/3 based boards.
diff --git a/drivers/mtd/nand/onenand/Kconfig b/drivers/mtd/nand/onenand/Kconfig
index 7d57836bf32f..8a362fd5bfc4 100644
--- a/drivers/mtd/nand/onenand/Kconfig
+++ b/drivers/mtd/nand/onenand/Kconfig
@@ -23,8 +23,8 @@ config MTD_ONENAND_GENERIC
Support for OneNAND flash via platform device driver.
config MTD_ONENAND_OMAP2
- tristate "OneNAND on OMAP2/OMAP3 support"
- depends on ARCH_OMAP2 || ARCH_OMAP3 || (COMPILE_TEST && ARM)
+ tristate "OneNAND on OMAP3 support"
+ depends on ARCH_OMAP3 || (COMPILE_TEST && ARM)
depends on OF
depends on OMAP_GPMC
help
diff --git a/drivers/video/fbdev/omap2/omapfb/Kconfig b/drivers/video/fbdev/omap2/omapfb/Kconfig
index 2d20e79adefc..d8227f4326bd 100644
--- a/drivers/video/fbdev/omap2/omapfb/Kconfig
+++ b/drivers/video/fbdev/omap2/omapfb/Kconfig
@@ -8,7 +8,7 @@ menuconfig FB_OMAP2
depends on DRM_OMAP = n
depends on GPIOLIB
select FB_OMAP2_DSS
- select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3
+ select OMAP2_VRFB if ARCH_OMAP3
select FB_IOMEM_HELPERS
help
Frame buffer driver for OMAP2+ based boards.
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 54a3fa370004..ca151152da19 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -265,12 +265,6 @@ int omap2_clk_disable_autoidle_all(void);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
int omap2_clk_deny_idle(struct clk *clk);
-unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
- unsigned long parent_rate);
-int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate,
- unsigned long parent_rate);
-void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
-void omap2xxx_clkt_vps_init(void);
unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
void ti_dt_clk_init_retry_clks(void);
@@ -322,8 +316,6 @@ void omap3_noncore_dpll_restore_context(struct clk_hw *hw);
int omap3_core_dpll_save_context(struct clk_hw *hw);
void omap3_core_dpll_restore_context(struct clk_hw *hw);
-extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
-
#ifdef CONFIG_ATAGS
int omap3430_clk_legacy_init(void);
int omap3430es1_clk_legacy_init(void);
--
2.53.0
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCH 06/13] ARM: omap2: remove omap24xx support
2026-09-08 15:27 ` [PATCH 06/13] ARM: omap2: remove omap24xx support Arnd Bergmann
@ 2026-09-08 17:18 ` Aaro Koskinen
2026-09-08 17:35 ` Linus Walleij
` (2 subsequent siblings)
3 siblings, 0 replies; 20+ messages in thread
From: Aaro Koskinen @ 2026-09-08 17:18 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Krzysztof Kozlowski, Alexandre Belloni, Linus Walleij,
Russell King, Drew Fustini, Arnd Bergmann, Rob Herring,
Conor Dooley, Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi,
Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Vladimir Zapolskiy, Stefan Agner, Maxime Coquelin,
Alexandre Torgue, Andreas Kemnade, Kevin Hilman, Roger Quadros,
Tony Lindgren, Nicolas Ferre, Claudiu Beznea, Andrew Lunn,
Sebastian Hesselbarth, Gregory Clement, Robert Jarzmik,
Kristoffer Ericson, Ethan Nelson-Moore, Geert Uytterhoeven,
Alexander Sverdlin, Shawn Guo, Karl Mehltretter,
David Hildenbrand (Arm), Nicolas Pitre, linux-doc, linux-kernel,
linux-arm-kernel, devicetree, imx, linux-stm32, linux-omap,
Paul Walmsley, Herbert Xu, David S. Miller, Mauro Carvalho Chehab,
Kyungmin Park, Helge Deller, Tero Kristo, Stephen Boyd,
Thomas Zimmermann, linux-media, linux-mtd, linux-fbdev, dri-devel,
linux-clk
Hi,
On Tue, Sep 08, 2026 at 05:27:56PM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The omap24xx SoC platform was used in the Nokia N800 and N810 tablets
> released on 2007 and was among the first ARMv6 CPUs in products that
> made it into products.
>
> Unfortunately the early ARM1136r0 CPU cores had a number of quirks that
> caused a disproportionate amount of work to keep them compatible with
> later ARMv6K/v7/v8 implementations.
>
> Drop the support for this SoC in order to allow removing ARM1136r0.
>
> Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
A.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 06/13] ARM: omap2: remove omap24xx support
2026-09-08 15:27 ` [PATCH 06/13] ARM: omap2: remove omap24xx support Arnd Bergmann
2026-09-08 17:18 ` Aaro Koskinen
@ 2026-09-08 17:35 ` Linus Walleij
2026-09-08 19:21 ` Karl Mehltretter
2026-09-09 8:06 ` Thomas Zimmermann
3 siblings, 0 replies; 20+ messages in thread
From: Linus Walleij @ 2026-09-08 17:35 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Krzysztof Kozlowski, Alexandre Belloni, Russell King,
Drew Fustini, Arnd Bergmann, Rob Herring, Conor Dooley,
Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Vladimir Zapolskiy, Stefan Agner, Maxime Coquelin,
Alexandre Torgue, Aaro Koskinen, Andreas Kemnade, Kevin Hilman,
Roger Quadros, Tony Lindgren, Nicolas Ferre, Claudiu Beznea,
Andrew Lunn, Sebastian Hesselbarth, Gregory Clement,
Robert Jarzmik, Kristoffer Ericson, Ethan Nelson-Moore,
Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo,
Karl Mehltretter, David Hildenbrand (Arm), Nicolas Pitre,
linux-doc, linux-kernel, linux-arm-kernel, devicetree, imx,
linux-stm32, linux-omap, Paul Walmsley, Herbert Xu,
David S. Miller, Mauro Carvalho Chehab, Kyungmin Park,
Helge Deller, Tero Kristo, Stephen Boyd, Thomas Zimmermann,
linux-media, linux-mtd, linux-fbdev, dri-devel, linux-clk
On Tue, Sep 8, 2026 at 5:29 PM Arnd Bergmann <arnd@kernel.org> wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The omap24xx SoC platform was used in the Nokia N800 and N810 tablets
> released on 2007 and was among the first ARMv6 CPUs in products that
> made it into products.
>
> Unfortunately the early ARM1136r0 CPU cores had a number of quirks that
> caused a disproportionate amount of work to keep them compatible with
> later ARMv6K/v7/v8 implementations.
>
> Drop the support for this SoC in order to allow removing ARM1136r0.
>
> Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
> Cc: Andreas Kemnade <andreas@kemnade.info>
> Cc: Kevin Hilman <khilman@baylibre.com>
> Cc: Roger Quadros <rogerq@kernel.org>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Paul Walmsley <paul@pwsan.com>
> Cc: Herbert Xu <herbert@gondor.apana.org.au>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: Kyungmin Park <kyungmin.park@samsung.com>
> Cc: Helge Deller <deller@gmx.de>
> Cc: Tero Kristo <kristo@kernel.org>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Thomas Zimmermann <tzimmermann@suse.de>
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-omap@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Cc: linux-media@vger.kernel.org
> Cc: linux-mtd@lists.infradead.org
> Cc: linux-fbdev@vger.kernel.org
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-clk@vger.kernel.org
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since Aaro says it can go, it can go.
If the n800 had a PostmarketOS port things would be different,
but it does not.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 06/13] ARM: omap2: remove omap24xx support
2026-09-08 15:27 ` [PATCH 06/13] ARM: omap2: remove omap24xx support Arnd Bergmann
2026-09-08 17:18 ` Aaro Koskinen
2026-09-08 17:35 ` Linus Walleij
@ 2026-09-08 19:21 ` Karl Mehltretter
2026-09-08 19:42 ` Arnd Bergmann
2026-09-09 8:06 ` Thomas Zimmermann
3 siblings, 1 reply; 20+ messages in thread
From: Karl Mehltretter @ 2026-09-08 19:21 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Krzysztof Kozlowski, Alexandre Belloni, Linus Walleij,
Russell King, Drew Fustini, Arnd Bergmann, Rob Herring,
Conor Dooley, Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi,
Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Vladimir Zapolskiy, Stefan Agner, Maxime Coquelin,
Alexandre Torgue, Aaro Koskinen, Andreas Kemnade, Kevin Hilman,
Roger Quadros, Tony Lindgren, Nicolas Ferre, Claudiu Beznea,
Andrew Lunn, Sebastian Hesselbarth, Gregory Clement,
Robert Jarzmik, Kristoffer Ericson, Ethan Nelson-Moore,
Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo,
David Hildenbrand (Arm), Nicolas Pitre, linux-doc, linux-kernel,
linux-arm-kernel, devicetree, imx, linux-stm32, linux-omap,
Paul Walmsley, Herbert Xu, David S. Miller, Mauro Carvalho Chehab,
Kyungmin Park, Helge Deller, Tero Kristo, Stephen Boyd,
Thomas Zimmermann, linux-media, linux-mtd, linux-fbdev, dri-devel,
linux-clk
On Tue, Sep 08, 2026 at 05:27:56PM +0100, Arnd Bergmann wrote:
> 86 files changed, 60 insertions(+), 10696 deletions(-)
Note that Sashiko skipped reviewing this patch, because it exceeded
its current 10000 line limit.
> -CONFIG_ARCH_MULTI_V6=y
> CONFIG_OMAP_RESET_CLOCKS=y
> -CONFIG_ARCH_OMAP2=y
With CONFIG_ARCH_MULTI_V6 gone, CONFIG_ARM_ERRATA_411920=y a few lines
down can be deleted (savedefconfig drops it)
> diff --git a/arch/arm/mach-omap2/gpmc.h b/arch/arm/mach-omap2/gpmc.h
> deleted file mode 100644
perl scripts/get_maintainer.pl --self-test=patterns now warns:
./MAINTAINERS:19896: warning: no file matches F: arch/arm/mach-omap2/*gpmc*
> @@ -560,13 +533,11 @@ void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
> * We still need this for omap2420 and omap3 PM to work, others are
Stale comment about omap2420
> diff --git a/arch/arm/mach-omap2/voltagedomains2xxx_data.c b/arch/arm/mach-omap2/voltagedomains2xxx_data.c
> deleted file mode 100644
> [...]
> -void __init omap2xxx_voltagedomains_init(void)
The declaration for this is still in voltage.h.
Thanks,
Karl
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 06/13] ARM: omap2: remove omap24xx support
2026-09-08 19:21 ` Karl Mehltretter
@ 2026-09-08 19:42 ` Arnd Bergmann
0 siblings, 0 replies; 20+ messages in thread
From: Arnd Bergmann @ 2026-09-08 19:42 UTC (permalink / raw)
To: Karl Mehltretter, Arnd Bergmann
Cc: Krzysztof Kozlowski, Alexandre Belloni, Linus Walleij,
Russell King, Drew Fustini, Rob Herring, Conor Dooley,
Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Vladimir Zapolskiy, Stefan Agner, Maxime Coquelin,
Alexandre Torgue, Aaro Koskinen, Andreas Kemnade, Kevin Hilman,
Roger Quadros, Tony Lindgren, Nicolas Ferre, Claudiu Beznea,
Andrew Lunn, Sebastian Hesselbarth, Gregory Clement,
Robert Jarzmik, Kristoffer Ericson, Ethan Nelson-Moore,
Geert Uytterhoeven, A. Sverdlin, Shawn Guo,
David Hildenbrand (Red Hat), Nicolas Pitre, linux-doc,
linux-kernel, linux-arm-kernel, devicetree, imx, linux-stm32,
Linux-OMAP, Paul Walmsley, Herbert Xu, David S . Miller,
Mauro Carvalho Chehab, Kyungmin Park, Helge Deller, Tero Kristo,
Stephen Boyd, Thomas Zimmermann, linux-media, linux-mtd,
linux-fbdev, dri-devel, linux-clk
On Tue, Sep 8, 2026, at 21:21, Karl Mehltretter wrote:
> On Tue, Sep 08, 2026 at 05:27:56PM +0100, Arnd Bergmann wrote:
>> 86 files changed, 60 insertions(+), 10696 deletions(-)
>
>> -CONFIG_ARCH_MULTI_V6=y
>> CONFIG_OMAP_RESET_CLOCKS=y
>> -CONFIG_ARCH_OMAP2=y
>
> With CONFIG_ARCH_MULTI_V6 gone, CONFIG_ARM_ERRATA_411920=y a few lines
> down can be deleted (savedefconfig drops it)
fixed now
>> diff --git a/arch/arm/mach-omap2/gpmc.h b/arch/arm/mach-omap2/gpmc.h
>> deleted file mode 100644
>
> perl scripts/get_maintainer.pl --self-test=patterns now warns:
> ./MAINTAINERS:19896: warning: no file matches F: arch/arm/mach-omap2/*gpmc*
Ah perfect, I was looking for that command, and will check
the rest of my series now.
>> @@ -560,13 +533,11 @@ void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
>> * We still need this for omap2420 and omap3 PM to work, others are
>
> Stale comment about omap2420
fixed.
>> diff --git a/arch/arm/mach-omap2/voltagedomains2xxx_data.c b/arch/arm/mach-omap2/voltagedomains2xxx_data.c
>> deleted file mode 100644
>> [...]
>> -void __init omap2xxx_voltagedomains_init(void)
>
> The declaration for this is still in voltage.h.
fixed.
Thanks a lot for taking a look here.
Arnd
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 03/13] ARM: remove riscpc
2026-09-08 15:27 ` [PATCH 03/13] ARM: remove riscpc Arnd Bergmann
@ 2026-09-09 8:04 ` Thomas Zimmermann
2026-09-09 16:42 ` Bart Van Assche
2026-09-11 3:44 ` Ethan Nelson-Moore
2 siblings, 0 replies; 20+ messages in thread
From: Thomas Zimmermann @ 2026-09-09 8:04 UTC (permalink / raw)
To: Arnd Bergmann, Krzysztof Kozlowski, Alexandre Belloni,
Linus Walleij, Russell King
Cc: Drew Fustini, Arnd Bergmann, Rob Herring, Conor Dooley,
Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Vladimir Zapolskiy, Stefan Agner, Maxime Coquelin,
Alexandre Torgue, Aaro Koskinen, Andreas Kemnade, Kevin Hilman,
Roger Quadros, Tony Lindgren, Nicolas Ferre, Claudiu Beznea,
Andrew Lunn, Sebastian Hesselbarth, Gregory Clement,
Robert Jarzmik, Kristoffer Ericson, Ethan Nelson-Moore,
Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo,
Karl Mehltretter, David Hildenbrand (Arm), Nicolas Pitre,
linux-doc, linux-kernel, linux-arm-kernel, devicetree, imx,
linux-stm32, linux-omap, Ian Molton, Jens Axboe, Helge Deller,
Paul E. McKenney, linux-block, linux-serial, linux-fbdev
Hi
Am 08.09.26 um 17:27 schrieb Arnd Bergmann:
[...]
> lib/fonts/font_acorn_8x8.c | 4 -
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> # lib/fonts
> 41 files changed, 12 insertions(+), 3688 deletions(-)
> delete mode 100644 arch/arm/boot/compressed/font.c
> delete mode 100644 arch/arm/boot/compressed/ll_char_wr.S
> delete mode 100644 arch/arm/configs/rpc_defconfig
> delete mode 100644 arch/arm/include/asm/ecard.h
> delete mode 100644 arch/arm/include/asm/hardware/ioc.h
> delete mode 100644 arch/arm/include/asm/hardware/iomd.h
> delete mode 100644 arch/arm/include/asm/hardware/memc.h
> delete mode 100644 arch/arm/mach-rpc/Kconfig
> delete mode 100644 arch/arm/mach-rpc/Makefile
> delete mode 100644 arch/arm/mach-rpc/dma.c
> delete mode 100644 arch/arm/mach-rpc/ecard-loader.S
> delete mode 100644 arch/arm/mach-rpc/ecard.c
> delete mode 100644 arch/arm/mach-rpc/ecard.h
> delete mode 100644 arch/arm/mach-rpc/fiq.S
> delete mode 100644 arch/arm/mach-rpc/floppydma.S
> delete mode 100644 arch/arm/mach-rpc/include/mach/acornfb.h
> delete mode 100644 arch/arm/mach-rpc/include/mach/hardware.h
> delete mode 100644 arch/arm/mach-rpc/include/mach/io.h
> delete mode 100644 arch/arm/mach-rpc/include/mach/irqs.h
> delete mode 100644 arch/arm/mach-rpc/include/mach/isa-dma.h
> delete mode 100644 arch/arm/mach-rpc/include/mach/memory.h
> delete mode 100644 arch/arm/mach-rpc/include/mach/uncompress.h
> delete mode 100644 arch/arm/mach-rpc/io-acorn.S
> delete mode 100644 arch/arm/mach-rpc/irq.c
> delete mode 100644 arch/arm/mach-rpc/riscpc.c
> delete mode 100644 arch/arm/mach-rpc/time.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4380d5660402..6e8fe7640064 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2350,12 +2350,6 @@ F: Documentation/devicetree/bindings/display/arm,malidp.yaml
> F: Documentation/gpu/afbc.rst
> F: drivers/gpu/drm/arm/
>
> -ARM MFM AND FLOPPY DRIVERS
> -M: Ian Molton <spyro@f2s.com>
> -S: Maintained
> -F: arch/arm/include/asm/floppy.h
> -F: arch/arm/mach-rpc/floppydma.S
> -
> ARM PMU PROFILING AND DEBUGGING
> M: Will Deacon <will@kernel.org>
> M: Mark Rutland <mark.rutland@arm.com>
> @@ -3494,20 +3488,6 @@ F: include/linux/soc/renesas/
> N: rcar
> K: \brenesas,
>
> -ARM/RISCPC ARCHITECTURE
> -M: Russell King <linux@armlinux.org.uk>
> -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> -S: Maintained
> -W: http://www.armlinux.org.uk/
> -F: arch/arm/include/asm/hardware/ioc.h
> -F: arch/arm/include/asm/hardware/iomd.h
> -F: arch/arm/include/asm/hardware/memc.h
> -F: arch/arm/mach-rpc/
> -F: drivers/net/ethernet/8390/etherh.c
> -F: drivers/net/ethernet/i825xx/ether1*
> -F: drivers/net/ethernet/seeq/ether3*
> -F: drivers/scsi/arm/
> -
> ARM/Rockchip SoC support
> M: Heiko Stuebner <heiko@sntech.de>
> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index c3d6b8abc815..5770deca136d 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -55,7 +55,7 @@ config ARM
> select ARCH_WANT_LD_ORPHAN_WARN
> select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
> select BUILDTIME_TABLE_SORT if MMU
> - select COMMON_CLK if !ARCH_RPC
> + select COMMON_CLK
> select CLONE_BACKWARDS
> select CPU_PM if SUSPEND || CPU_IDLE
> select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
> @@ -155,13 +155,13 @@ config ARM
> select PCI_SYSCALL if PCI
> select PERF_USE_VMALLOC
> select RTC_LIB
> - select SPARSE_IRQ if !ARCH_RPC
> + select SPARSE_IRQ
> select SYS_SUPPORTS_APM_EMULATION
> select THREAD_INFO_IN_TASK
> select TIMER_OF if OF
> select HAVE_ARCH_VMAP_STACK if MMU && ARM_HAS_GROUP_RELOCS
> select TRACE_IRQFLAGS_SUPPORT if !CPU_V7M
> - select USE_OF if !ARCH_RPC
> + select USE_OF
> # Above selects are sorted alphabetically; please add new ones
> # according to that. Thanks.
> help
> @@ -277,25 +277,11 @@ config ARM_PATCH_PHYS_VIRT
> this feature (eg, building a kernel for a single machine) and
> you need to shrink the kernel to the minimal size.
>
> -config NEED_MACH_IO_H
> - bool
> - help
> - Select this when mach/io.h is required to provide special
> - definitions for this platform. The need for mach/io.h should
> - be avoided when possible.
> -
> -config NEED_MACH_MEMORY_H
> - bool
> - help
> - Select this when mach/memory.h is required to provide special
> - definitions for this platform. The need for mach/memory.h should
> - be avoided when possible.
> -
> config PHYS_OFFSET
> hex "Physical address of main memory" if MMU
> depends on !ARM_PATCH_PHYS_VIRT || !AUTO_ZRELADDR
> default DRAM_BASE if !MMU
> - default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
> + default 0x10000000 if ARCH_OMAP1
> default 0xa0000000 if ARCH_PXA
> default 0xc0000000 if ARCH_EP93XX
> default 0
> @@ -337,7 +323,7 @@ config ARCH_MMAP_RND_BITS_MAX
>
> config ARCH_MULTIPLATFORM
> bool "Require kernel to be portable to multiple machines" if EXPERT
> - depends on MMU && !ARCH_RPC
> + depends on MMU
> default y
> help
> In general, all Arm machines can be supported in a single
> @@ -429,8 +415,6 @@ source "arch/arm/mach-qcom/Kconfig"
>
> source "arch/arm/mach-realtek/Kconfig"
>
> -source "arch/arm/mach-rpc/Kconfig"
> -
> source "arch/arm/mach-rockchip/Kconfig"
>
> source "arch/arm/mach-s3c/Kconfig"
> @@ -490,9 +474,6 @@ config ARCH_MPS2
> This platform is scheduled for removal in early 2027
>
> # Definitions to make life easier
> -config ARCH_ACORN
> - bool
> -
> config PLAT_ORION
> bool
> select CLKSRC_MMIO
> @@ -1191,7 +1172,7 @@ config ARCH_SELECT_MEMORY_MODEL
> def_bool y
>
> config ARCH_FLATMEM_ENABLE
> - def_bool !ARCH_RPC
> + def_bool y
>
> config ARCH_SPARSEMEM_ENABLE
> def_bool y
> @@ -1594,7 +1575,7 @@ config ARCH_DEFAULT_CRASH_DUMP
>
> config AUTO_ZRELADDR
> bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM
> - default !ARCH_RPC
> + default y
> help
> ZRELADDR is the physical address where the decompressed kernel
> image will be placed. If AUTO_ZRELADDR is selected, the address
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index f2a80955b7a0..56c090840c5a 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -1446,7 +1446,7 @@ config DEBUG_STM32_UART
> config DEBUG_UART_FLOW_CONTROL
> bool "Enable flow control (CTS) for the debug UART"
> depends on DEBUG_LL
> - default y if DEBUG_GEMINI || ARCH_RPC
> + default y if DEBUG_GEMINI
> help
> Some UART ports are connected to terminals that will use modem
> control signals to indicate whether they are ready to receive text.
> @@ -1516,7 +1516,7 @@ config DEBUG_UART_PL01X
>
> # Compatibility options for 8250
> config DEBUG_UART_8250
> - def_bool ARCH_IXP4XX || ARCH_RPC
> + def_bool ARCH_IXP4XX
>
> config DEBUG_UART_PHYS
> hex "Physical base address of debug UART"
> @@ -1527,7 +1527,6 @@ config DEBUG_UART_PHYS
> default 0x01f02800 if DEBUG_SUNXI_R_UART
> default 0x02530c00 if DEBUG_KEYSTONE_UART0
> default 0x02531000 if DEBUG_KEYSTONE_UART1
> - default 0x03010fe0 if ARCH_RPC
> default 0x07000000 if DEBUG_SUN9I_UART0
> default 0x09530000 if DEBUG_STIH418_SBC_ASC0
> default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
> @@ -1654,7 +1653,6 @@ config DEBUG_UART_VIRT
> default 0xc881f000 if DEBUG_RV1108_UART2
> default 0xc8821000 if DEBUG_RV1108_UART1
> default 0xc8912000 if DEBUG_RV1108_UART0
> - default 0xe0010fe0 if ARCH_RPC
> default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
> default 0xf0010000 if DEBUG_ASM9260_UART
> default 0xf0100000 if DEBUG_DIGICOLOR_UA0
> @@ -1779,7 +1777,6 @@ config DEBUG_UART_8250_PALMCHIP
> config DEBUG_UNCOMPRESS
> bool "Enable decompressor debugging via DEBUG_LL output"
> depends on !ARCH_MULTIPLATFORM
> - depends on !ARCH_RPC
> depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
> (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
> !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING
> @@ -1789,7 +1786,6 @@ config DEBUG_UNCOMPRESS
>
> config UNCOMPRESS_INCLUDE
> string
> - default "mach/uncompress.h" if ARCH_RPC
> default "debug/uncompress.h"
>
> config EARLY_PRINTK
> diff --git a/arch/arm/boot/bootp/Makefile b/arch/arm/boot/bootp/Makefile
> index 12c61684b97f..1e47bf10069d 100644
> --- a/arch/arm/boot/bootp/Makefile
> +++ b/arch/arm/boot/bootp/Makefile
> @@ -19,8 +19,6 @@ add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
> PARAMS_PHYS := $(call add_hex, $(PHYS_OFFSET), 0x100)
>
> # guess an initrd location if possible
> -initrd_offset-$(CONFIG_ARCH_RPC) += 0x08000000
> -INITRD_OFFSET := $(initrd_offset-y)
> ifdef INITRD_OFFSET
> INITRD_PHYS := $(call add_hex, $(PHYS_OFFSET), $(INITRD_OFFSET))
> endif
> diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
> index d8d81ba741a2..32def10f5e03 100644
> --- a/arch/arm/boot/compressed/Makefile
> +++ b/arch/arm/boot/compressed/Makefile
> @@ -25,10 +25,6 @@ endif
> #
> # Architecture dependencies
> #
> -ifeq ($(CONFIG_ARCH_ACORN),y)
> -OBJS += ll_char_wr.o font.o
> -endif
> -
> ifeq ($(CONFIG_CPU_XSCALE),y)
> OBJS += head-xscale.o
> endif
> diff --git a/arch/arm/boot/compressed/font.c b/arch/arm/boot/compressed/font.c
> deleted file mode 100644
> index 46a677649db4..000000000000
> --- a/arch/arm/boot/compressed/font.c
> +++ /dev/null
> @@ -1,2 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -#include "../../../../lib/fonts/font_acorn_8x8.c"
> diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
> index 845abffbc2d6..af579905b630 100644
> --- a/arch/arm/boot/compressed/head.S
> +++ b/arch/arm/boot/compressed/head.S
> @@ -668,14 +668,6 @@ LC1: .word .L_user_stack_end - LC1 @ sp
> .Linflated_image_size_offset:
> .long (input_data_end - 4) - .
>
> -#ifdef CONFIG_ARCH_RPC
> - .globl params
> -params: ldr r0, =0x10000100 @ params_phys for RPC
> - mov pc, lr
> - .ltorg
> - .align
> -#endif
> -
> /*
> * dcache_line_size - get the minimum D-cache line size from the CTR register
> * on ARMv7.
> diff --git a/arch/arm/boot/compressed/ll_char_wr.S b/arch/arm/boot/compressed/ll_char_wr.S
> deleted file mode 100644
> index 1ec8cb2898b1..000000000000
> --- a/arch/arm/boot/compressed/ll_char_wr.S
> +++ /dev/null
> @@ -1,131 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * linux/arch/arm/lib/ll_char_wr.S
> - *
> - * Copyright (C) 1995, 1996 Russell King.
> - *
> - * Speedups & 1bpp code (C) 1996 Philip Blundell & Russell King.
> - *
> - * 10-04-96 RMK Various cleanups & reduced register usage.
> - * 08-04-98 RMK Shifts re-ordered
> - */
> -
> -@ Regs: [] = corruptible
> -@ {} = used
> -@ () = do not use
> -
> -#include <linux/linkage.h>
> -#include <asm/assembler.h>
> - .text
> -
> -LC0: .word LC0
> - .word bytes_per_char_h
> - .word video_size_row
> - .word acorndata_8x8
> - .word con_charconvtable
> -
> -/*
> - * r0 = ptr
> - * r1 = char
> - * r2 = white
> - */
> -ENTRY(ll_write_char)
> - stmfd sp!, {r4 - r7, lr}
> -@
> -@ Smashable regs: {r0 - r3}, [r4 - r7], (r8 - fp), [ip], (sp), [lr], (pc)
> -@
> - /*
> - * calculate offset into character table
> - */
> - mov r1, r1, lsl #3
> - /*
> - * calculate offset required for each row.
> - */
> - adr ip, LC0
> - ldmia ip, {r3, r4, r5, r6, lr}
> - sub ip, ip, r3
> - add r6, r6, ip
> - add lr, lr, ip
> - ldr r4, [r4, ip]
> - ldr r5, [r5, ip]
> - /*
> - * Go to resolution-dependent routine...
> - */
> - cmp r4, #4
> - blt Lrow1bpp
> - add r0, r0, r5, lsl #3 @ Move to bottom of character
> - orr r1, r1, #7
> - ldrb r7, [r6, r1]
> - teq r4, #8
> - beq Lrow8bpplp
> -@
> -@ Smashable regs: {r0 - r3}, [r4], {r5 - r7}, (r8 - fp), [ip], (sp), {lr}, (pc)
> -@
> -Lrow4bpplp:
> - ldr r7, [lr, r7, lsl #2]
> - mul r7, r2, r7
> - sub r1, r1, #1 @ avoid using r7 directly after
> - str r7, [r0, -r5]!
> - ldrb r7, [r6, r1]
> - ldr r7, [lr, r7, lsl #2]
> - mul r7, r2, r7
> - tst r1, #7 @ avoid using r7 directly after
> - str r7, [r0, -r5]!
> - subne r1, r1, #1
> - ldrbne r7, [r6, r1]
> - bne Lrow4bpplp
> - ldmfd sp!, {r4 - r7, pc}
> -
> -@
> -@ Smashable regs: {r0 - r3}, [r4], {r5 - r7}, (r8 - fp), [ip], (sp), {lr}, (pc)
> -@
> -Lrow8bpplp:
> - mov ip, r7, lsr #4
> - ldr ip, [lr, ip, lsl #2]
> - mul r4, r2, ip
> - and ip, r7, #15 @ avoid r4
> - ldr ip, [lr, ip, lsl #2] @ avoid r4
> - mul ip, r2, ip @ avoid r4
> - sub r1, r1, #1 @ avoid ip
> - sub r0, r0, r5 @ avoid ip
> - stmia r0, {r4, ip}
> - ldrb r7, [r6, r1]
> - mov ip, r7, lsr #4
> - ldr ip, [lr, ip, lsl #2]
> - mul r4, r2, ip
> - and ip, r7, #15 @ avoid r4
> - ldr ip, [lr, ip, lsl #2] @ avoid r4
> - mul ip, r2, ip @ avoid r4
> - tst r1, #7 @ avoid ip
> - sub r0, r0, r5 @ avoid ip
> - stmia r0, {r4, ip}
> - subne r1, r1, #1
> - ldrbne r7, [r6, r1]
> - bne Lrow8bpplp
> - ldmfd sp!, {r4 - r7, pc}
> -
> -@
> -@ Smashable regs: {r0 - r3}, [r4], {r5, r6}, [r7], (r8 - fp), [ip], (sp), [lr], (pc)
> -@
> -Lrow1bpp:
> - add r6, r6, r1
> - ldmia r6, {r4, r7}
> - strb r4, [r0], r5
> - mov r4, r4, lsr #8
> - strb r4, [r0], r5
> - mov r4, r4, lsr #8
> - strb r4, [r0], r5
> - mov r4, r4, lsr #8
> - strb r4, [r0], r5
> - strb r7, [r0], r5
> - mov r7, r7, lsr #8
> - strb r7, [r0], r5
> - mov r7, r7, lsr #8
> - strb r7, [r0], r5
> - mov r7, r7, lsr #8
> - strb r7, [r0], r5
> - ldmfd sp!, {r4 - r7, pc}
> -
> - .bss
> -ENTRY(con_charconvtable)
> - .space 1024
> diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
> deleted file mode 100644
> index edb52d56f679..000000000000
> --- a/arch/arm/configs/rpc_defconfig
> +++ /dev/null
> @@ -1,127 +0,0 @@
> -# CONFIG_LOCALVERSION_AUTO is not set
> -CONFIG_SYSVIPC=y
> -CONFIG_LOG_BUF_SHIFT=14
> -CONFIG_BLK_DEV_INITRD=y
> -CONFIG_EXPERT=y
> -CONFIG_ARCH_MULTI_V4=y
> -# CONFIG_ARCH_MULTI_V7 is not set
> -CONFIG_ARCH_RPC=y
> -CONFIG_CPU_SA110=y
> -CONFIG_FPE_NWFPE=y
> -# CONFIG_AEABI is not set
> -CONFIG_ATAGS=y
> -CONFIG_MODULES=y
> -CONFIG_MODULE_UNLOAD=y
> -CONFIG_PARTITION_ADVANCED=y
> -CONFIG_BSD_DISKLABEL=y
> -CONFIG_NET=y
> -CONFIG_PACKET=y
> -CONFIG_UNIX=y
> -CONFIG_INET=y
> -CONFIG_IP_MULTICAST=y
> -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
> -# CONFIG_INET_XFRM_MODE_TUNNEL is not set
> -# CONFIG_INET_XFRM_MODE_BEET is not set
> -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
> -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
> -# CONFIG_INET6_XFRM_MODE_BEET is not set
> -CONFIG_PARPORT=y
> -CONFIG_PARPORT_PC=y
> -CONFIG_PARPORT_PC_FIFO=y
> -CONFIG_BLK_DEV_FD=y
> -CONFIG_BLK_DEV_LOOP=m
> -CONFIG_BLK_DEV_RAM=y
> -CONFIG_BLK_DEV_SD=y
> -CONFIG_CHR_DEV_ST=m
> -CONFIG_BLK_DEV_SR=y
> -CONFIG_CHR_DEV_SG=y
> -# CONFIG_BLK_DEV_BSG is not set
> -CONFIG_SCSI_CONSTANTS=y
> -CONFIG_SCSI_LOGGING=y
> -CONFIG_SCSI_ARXESCSI=m
> -CONFIG_SCSI_CUMANA_2=m
> -CONFIG_SCSI_EESOXSCSI=m
> -CONFIG_SCSI_POWERTECSCSI=y
> -CONFIG_SCSI_CUMANA_1=m
> -CONFIG_SCSI_OAK1=m
> -CONFIG_ATA=y
> -CONFIG_PATA_ICSIDE=y
> -CONFIG_PATA_PLATFORM=y
> -CONFIG_NETDEVICES=y
> -CONFIG_ARM_ETHER1=y
> -CONFIG_ARM_ETHER3=y
> -CONFIG_ARM_ETHERH=y
> -CONFIG_PPP=m
> -CONFIG_PPPOE=m
> -CONFIG_INPUT_EVDEV=y
> -# CONFIG_MOUSE_PS2 is not set
> -CONFIG_MOUSE_RISCPC=y
> -# CONFIG_SERIO_SERPORT is not set
> -CONFIG_LEGACY_PTY_COUNT=64
> -CONFIG_SERIAL_8250=y
> -CONFIG_SERIAL_8250_CONSOLE=y
> -CONFIG_SERIAL_8250_NR_UARTS=16
> -CONFIG_SERIAL_8250_RUNTIME_UARTS=8
> -CONFIG_SERIAL_8250_ACORN=y
> -CONFIG_PRINTER=m
> -# CONFIG_HW_RANDOM is not set
> -CONFIG_I2C=y
> -CONFIG_I2C_CHARDEV=y
> -# CONFIG_HWMON is not set
> -CONFIG_FB=y
> -CONFIG_FB_ACORN=y
> -CONFIG_FRAMEBUFFER_CONSOLE=y
> -CONFIG_LOGO=y
> -CONFIG_SOUND=m
> -CONFIG_SOUND_PRIME=m
> -CONFIG_SOUND_OSS=m
> -CONFIG_SOUND_VIDC=m
> -# CONFIG_USB_SUPPORT is not set
> -CONFIG_RTC_CLASS=y
> -CONFIG_RTC_DRV_PCF8583=y
> -CONFIG_EXT2_FS=y
> -CONFIG_EXT4_FS=y
> -CONFIG_AUTOFS_FS=m
> -CONFIG_ISO9660_FS=y
> -CONFIG_JOLIET=y
> -CONFIG_MSDOS_FS=m
> -CONFIG_VFAT_FS=m
> -CONFIG_ADFS_FS=y
> -CONFIG_NFS_FS=y
> -# CONFIG_ACORN_PARTITION_CUMANA is not set
> -# CONFIG_ACORN_PARTITION_EESOX is not set
> -CONFIG_NLS_CODEPAGE_437=m
> -CONFIG_NLS_CODEPAGE_737=m
> -CONFIG_NLS_CODEPAGE_775=m
> -CONFIG_NLS_CODEPAGE_850=m
> -CONFIG_NLS_CODEPAGE_852=m
> -CONFIG_NLS_CODEPAGE_855=m
> -CONFIG_NLS_CODEPAGE_857=m
> -CONFIG_NLS_CODEPAGE_860=m
> -CONFIG_NLS_CODEPAGE_861=m
> -CONFIG_NLS_CODEPAGE_862=m
> -CONFIG_NLS_CODEPAGE_863=m
> -CONFIG_NLS_CODEPAGE_864=m
> -CONFIG_NLS_CODEPAGE_865=m
> -CONFIG_NLS_CODEPAGE_866=m
> -CONFIG_NLS_CODEPAGE_869=m
> -CONFIG_NLS_CODEPAGE_874=m
> -CONFIG_NLS_ISO8859_8=m
> -CONFIG_NLS_ASCII=y
> -CONFIG_NLS_ISO8859_1=m
> -CONFIG_NLS_ISO8859_2=m
> -CONFIG_NLS_ISO8859_3=m
> -CONFIG_NLS_ISO8859_4=m
> -CONFIG_NLS_ISO8859_5=m
> -CONFIG_NLS_ISO8859_6=m
> -CONFIG_NLS_ISO8859_7=m
> -CONFIG_NLS_ISO8859_9=m
> -CONFIG_NLS_KOI8_R=m
> -CONFIG_FONTS=y
> -CONFIG_FONT_8x16=y
> -CONFIG_FONT_ACORN_8x8=y
> -CONFIG_DEBUG_KERNEL=y
> -CONFIG_MAGIC_SYSRQ=y
> -CONFIG_DEBUG_USER=y
> -CONFIG_DEBUG_LL=y
> -CONFIG_DEBUG_LL_UART_8250=y
> diff --git a/arch/arm/include/asm/ecard.h b/arch/arm/include/asm/ecard.h
> deleted file mode 100644
> index 7cbe001bf9cc..000000000000
> --- a/arch/arm/include/asm/ecard.h
> +++ /dev/null
> @@ -1,219 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -/*
> - * arch/arm/include/asm/ecard.h
> - *
> - * definitions for expansion cards
> - *
> - * This is a new system as from Linux 1.2.3
> - *
> - * Changelog:
> - * 11-12-1996 RMK Further minor improvements
> - * 12-09-1997 RMK Added interrupt enable/disable for card level
> - *
> - * Reference: Acorns Risc OS 3 Programmers Reference Manuals.
> - */
> -
> -#ifndef __ASM_ECARD_H
> -#define __ASM_ECARD_H
> -
> -/*
> - * Currently understood cards (but not necessarily
> - * supported):
> - * Manufacturer Product ID
> - */
> -#define MANU_ACORN 0x0000
> -#define PROD_ACORN_SCSI 0x0002
> -#define PROD_ACORN_ETHER1 0x0003
> -#define PROD_ACORN_MFM 0x000b
> -
> -#define MANU_ANT2 0x0011
> -#define PROD_ANT_ETHER3 0x00a4
> -
> -#define MANU_ATOMWIDE 0x0017
> -#define PROD_ATOMWIDE_3PSERIAL 0x0090
> -
> -#define MANU_IRLAM_INSTRUMENTS 0x001f
> -#define MANU_IRLAM_INSTRUMENTS_ETHERN 0x5678
> -
> -#define MANU_OAK 0x0021
> -#define PROD_OAK_SCSI 0x0058
> -
> -#define MANU_MORLEY 0x002b
> -#define PROD_MORLEY_SCSI_UNCACHED 0x0067
> -
> -#define MANU_CUMANA 0x003a
> -#define PROD_CUMANA_SCSI_2 0x003a
> -#define PROD_CUMANA_SCSI_1 0x00a0
> -
> -#define MANU_ICS 0x003c
> -#define PROD_ICS_IDE 0x00ae
> -
> -#define MANU_ICS2 0x003d
> -#define PROD_ICS2_IDE 0x00ae
> -
> -#define MANU_SERPORT 0x003f
> -#define PROD_SERPORT_DSPORT 0x00b9
> -
> -#define MANU_ARXE 0x0041
> -#define PROD_ARXE_SCSI 0x00be
> -
> -#define MANU_I3 0x0046
> -#define PROD_I3_ETHERLAN500 0x00d4
> -#define PROD_I3_ETHERLAN600 0x00ec
> -#define PROD_I3_ETHERLAN600A 0x011e
> -
> -#define MANU_ANT 0x0053
> -#define PROD_ANT_ETHERM 0x00d8
> -#define PROD_ANT_ETHERB 0x00e4
> -
> -#define MANU_ALSYSTEMS 0x005b
> -#define PROD_ALSYS_SCSIATAPI 0x0107
> -
> -#define MANU_MCS 0x0063
> -#define PROD_MCS_CONNECT32 0x0125
> -
> -#define MANU_EESOX 0x0064
> -#define PROD_EESOX_SCSI2 0x008c
> -
> -#define MANU_YELLOWSTONE 0x0096
> -#define PROD_YELLOWSTONE_RAPIDE32 0x0120
> -
> -#ifdef ECARD_C
> -#define CONST
> -#else
> -#define CONST const
> -#endif
> -
> -#define MAX_ECARDS 9
> -
> -struct ecard_id { /* Card ID structure */
> - unsigned short manufacturer;
> - unsigned short product;
> - void *data;
> -};
> -
> -struct in_ecid { /* Packed card ID information */
> - unsigned short product; /* Product code */
> - unsigned short manufacturer; /* Manufacturer code */
> - unsigned char id:4; /* Simple ID */
> - unsigned char cd:1; /* Chunk dir present */
> - unsigned char is:1; /* Interrupt status pointers */
> - unsigned char w:2; /* Width */
> - unsigned char country; /* Country */
> - unsigned char irqmask; /* IRQ mask */
> - unsigned char fiqmask; /* FIQ mask */
> - unsigned long irqoff; /* IRQ offset */
> - unsigned long fiqoff; /* FIQ offset */
> -};
> -
> -typedef struct expansion_card ecard_t;
> -typedef unsigned long *loader_t;
> -
> -typedef struct expansion_card_ops { /* Card handler routines */
> - void (*irqenable)(ecard_t *ec, int irqnr);
> - void (*irqdisable)(ecard_t *ec, int irqnr);
> - int (*irqpending)(ecard_t *ec);
> - void (*fiqenable)(ecard_t *ec, int fiqnr);
> - void (*fiqdisable)(ecard_t *ec, int fiqnr);
> - int (*fiqpending)(ecard_t *ec);
> -} expansioncard_ops_t;
> -
> -#define ECARD_NUM_RESOURCES (6)
> -
> -#define ECARD_RES_IOCSLOW (0)
> -#define ECARD_RES_IOCMEDIUM (1)
> -#define ECARD_RES_IOCFAST (2)
> -#define ECARD_RES_IOCSYNC (3)
> -#define ECARD_RES_MEMC (4)
> -#define ECARD_RES_EASI (5)
> -
> -#define ecard_resource_start(ec,nr) ((ec)->resource[nr].start)
> -#define ecard_resource_end(ec,nr) ((ec)->resource[nr].end)
> -#define ecard_resource_len(ec,nr) ((ec)->resource[nr].end - \
> - (ec)->resource[nr].start + 1)
> -#define ecard_resource_flags(ec,nr) ((ec)->resource[nr].flags)
> -
> -/*
> - * This contains all the info needed on an expansion card
> - */
> -struct expansion_card {
> - struct expansion_card *next;
> -
> - struct device dev;
> - struct resource resource[ECARD_NUM_RESOURCES];
> -
> - /* Public data */
> - void __iomem *irqaddr; /* address of IRQ register */
> - void __iomem *fiqaddr; /* address of FIQ register */
> - unsigned char irqmask; /* IRQ mask */
> - unsigned char fiqmask; /* FIQ mask */
> - unsigned char claimed; /* Card claimed? */
> - unsigned char easi; /* EASI card */
> -
> - void *irq_data; /* Data for use for IRQ by card */
> - void *fiq_data; /* Data for use for FIQ by card */
> - const expansioncard_ops_t *ops; /* Enable/Disable Ops for card */
> -
> - CONST unsigned int slot_no; /* Slot number */
> - CONST unsigned int dma; /* DMA number (for request_dma) */
> - CONST unsigned int irq; /* IRQ number (for request_irq) */
> - CONST unsigned int fiq; /* FIQ number (for request_irq) */
> - CONST struct in_ecid cid; /* Card Identification */
> -
> - /* Private internal data */
> - const char *card_desc; /* Card description */
> - CONST loader_t loader; /* loader program */
> - u64 dma_mask;
> -};
> -
> -void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data);
> -
> -struct in_chunk_dir {
> - unsigned int start_offset;
> - union {
> - unsigned char string[256];
> - unsigned char data[1];
> - } d;
> -};
> -
> -/*
> - * Read a chunk from an expansion card
> - * cd : where to put read data
> - * ec : expansion card info struct
> - * id : id number to find
> - * num: (n+1)'th id to find.
> - */
> -extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num);
> -
> -/*
> - * Request and release ecard resources
> - */
> -extern int ecard_request_resources(struct expansion_card *ec);
> -extern void ecard_release_resources(struct expansion_card *ec);
> -
> -void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
> - unsigned long offset, unsigned long maxsize);
> -#define ecardm_iounmap(__ec, __addr) devm_iounmap(&(__ec)->dev, __addr)
> -
> -extern const struct bus_type ecard_bus_type;
> -
> -#define ECARD_DEV(_d) container_of((_d), struct expansion_card, dev)
> -
> -struct ecard_driver {
> - int (*probe)(struct expansion_card *, const struct ecard_id *id);
> - void (*remove)(struct expansion_card *);
> - void (*shutdown)(struct expansion_card *);
> - const struct ecard_id *id_table;
> - unsigned int id;
> - struct device_driver drv;
> -};
> -
> -#define ECARD_DRV(_d) container_of((_d), struct ecard_driver, drv)
> -
> -#define ecard_set_drvdata(ec,data) dev_set_drvdata(&(ec)->dev, (data))
> -#define ecard_get_drvdata(ec) dev_get_drvdata(&(ec)->dev)
> -
> -int ecard_register_driver(struct ecard_driver *);
> -void ecard_remove_driver(struct ecard_driver *);
> -
> -#endif
> diff --git a/arch/arm/include/asm/hardware/ioc.h b/arch/arm/include/asm/hardware/ioc.h
> deleted file mode 100644
> index 6edd27fcd048..000000000000
> --- a/arch/arm/include/asm/hardware/ioc.h
> +++ /dev/null
> @@ -1,69 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * arch/arm/include/asm/hardware/ioc.h
> - *
> - * Copyright (C) Russell King
> - *
> - * Use these macros to read/write the IOC. All it does is perform the actual
> - * read/write.
> - */
> -#ifndef __ASMARM_HARDWARE_IOC_H
> -#define __ASMARM_HARDWARE_IOC_H
> -
> -#ifndef __ASSEMBLY__
> -
> -/*
> - * We use __raw_base variants here so that we give the compiler the
> - * chance to keep IOC_BASE in a register.
> - */
> -#define ioc_readb(off) __raw_readb(IOC_BASE + (off))
> -#define ioc_writeb(val,off) __raw_writeb(val, IOC_BASE + (off))
> -
> -#endif
> -
> -#define IOC_CONTROL (0x00)
> -#define IOC_KARTTX (0x04)
> -#define IOC_KARTRX (0x04)
> -
> -#define IOC_IRQSTATA (0x10)
> -#define IOC_IRQREQA (0x14)
> -#define IOC_IRQCLRA (0x14)
> -#define IOC_IRQMASKA (0x18)
> -
> -#define IOC_IRQSTATB (0x20)
> -#define IOC_IRQREQB (0x24)
> -#define IOC_IRQMASKB (0x28)
> -
> -#define IOC_FIQSTAT (0x30)
> -#define IOC_FIQREQ (0x34)
> -#define IOC_FIQMASK (0x38)
> -
> -#define IOC_T0CNTL (0x40)
> -#define IOC_T0LTCHL (0x40)
> -#define IOC_T0CNTH (0x44)
> -#define IOC_T0LTCHH (0x44)
> -#define IOC_T0GO (0x48)
> -#define IOC_T0LATCH (0x4c)
> -
> -#define IOC_T1CNTL (0x50)
> -#define IOC_T1LTCHL (0x50)
> -#define IOC_T1CNTH (0x54)
> -#define IOC_T1LTCHH (0x54)
> -#define IOC_T1GO (0x58)
> -#define IOC_T1LATCH (0x5c)
> -
> -#define IOC_T2CNTL (0x60)
> -#define IOC_T2LTCHL (0x60)
> -#define IOC_T2CNTH (0x64)
> -#define IOC_T2LTCHH (0x64)
> -#define IOC_T2GO (0x68)
> -#define IOC_T2LATCH (0x6c)
> -
> -#define IOC_T3CNTL (0x70)
> -#define IOC_T3LTCHL (0x70)
> -#define IOC_T3CNTH (0x74)
> -#define IOC_T3LTCHH (0x74)
> -#define IOC_T3GO (0x78)
> -#define IOC_T3LATCH (0x7c)
> -
> -#endif
> diff --git a/arch/arm/include/asm/hardware/iomd.h b/arch/arm/include/asm/hardware/iomd.h
> deleted file mode 100644
> index 53006ba5350f..000000000000
> --- a/arch/arm/include/asm/hardware/iomd.h
> +++ /dev/null
> @@ -1,182 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * arch/arm/include/asm/hardware/iomd.h
> - *
> - * Copyright (C) 1999 Russell King
> - *
> - * This file contains information out the IOMD ASIC used in the
> - * Acorn RiscPC and subsequently integrated into the CLPS7500 chips.
> - */
> -#ifndef __ASMARM_HARDWARE_IOMD_H
> -#define __ASMARM_HARDWARE_IOMD_H
> -
> -
> -#ifndef __ASSEMBLY__
> -
> -/*
> - * We use __raw_base variants here so that we give the compiler the
> - * chance to keep IOC_BASE in a register.
> - */
> -#define iomd_readb(off) __raw_readb(IOMD_BASE + (off))
> -#define iomd_readl(off) __raw_readl(IOMD_BASE + (off))
> -#define iomd_writeb(val,off) __raw_writeb(val, IOMD_BASE + (off))
> -#define iomd_writel(val,off) __raw_writel(val, IOMD_BASE + (off))
> -
> -#endif
> -
> -#define IOMD_CONTROL (0x000)
> -#define IOMD_KARTTX (0x004)
> -#define IOMD_KARTRX (0x004)
> -#define IOMD_KCTRL (0x008)
> -
> -#define IOMD_IRQSTATA (0x010)
> -#define IOMD_IRQREQA (0x014)
> -#define IOMD_IRQCLRA (0x014)
> -#define IOMD_IRQMASKA (0x018)
> -
> -#define IOMD_IRQSTATB (0x020)
> -#define IOMD_IRQREQB (0x024)
> -#define IOMD_IRQMASKB (0x028)
> -
> -#define IOMD_FIQSTAT (0x030)
> -#define IOMD_FIQREQ (0x034)
> -#define IOMD_FIQMASK (0x038)
> -
> -#define IOMD_T0CNTL (0x040)
> -#define IOMD_T0LTCHL (0x040)
> -#define IOMD_T0CNTH (0x044)
> -#define IOMD_T0LTCHH (0x044)
> -#define IOMD_T0GO (0x048)
> -#define IOMD_T0LATCH (0x04c)
> -
> -#define IOMD_T1CNTL (0x050)
> -#define IOMD_T1LTCHL (0x050)
> -#define IOMD_T1CNTH (0x054)
> -#define IOMD_T1LTCHH (0x054)
> -#define IOMD_T1GO (0x058)
> -#define IOMD_T1LATCH (0x05c)
> -
> -#define IOMD_ROMCR0 (0x080)
> -#define IOMD_ROMCR1 (0x084)
> -#ifdef CONFIG_ARCH_RPC
> -#define IOMD_DRAMCR (0x088)
> -#endif
> -#define IOMD_REFCR (0x08C)
> -
> -#define IOMD_FSIZE (0x090)
> -#define IOMD_ID0 (0x094)
> -#define IOMD_ID1 (0x098)
> -#define IOMD_VERSION (0x09C)
> -
> -#ifdef CONFIG_ARCH_RPC
> -#define IOMD_MOUSEX (0x0A0)
> -#define IOMD_MOUSEY (0x0A4)
> -#endif
> -
> -#ifdef CONFIG_ARCH_RPC
> -#define IOMD_DMATCR (0x0C0)
> -#endif
> -#define IOMD_IOTCR (0x0C4)
> -#define IOMD_ECTCR (0x0C8)
> -#ifdef CONFIG_ARCH_RPC
> -#define IOMD_DMAEXT (0x0CC)
> -#endif
> -
> -#ifdef CONFIG_ARCH_RPC
> -#define DMA_EXT_IO0 1
> -#define DMA_EXT_IO1 2
> -#define DMA_EXT_IO2 4
> -#define DMA_EXT_IO3 8
> -
> -#define IOMD_IO0CURA (0x100)
> -#define IOMD_IO0ENDA (0x104)
> -#define IOMD_IO0CURB (0x108)
> -#define IOMD_IO0ENDB (0x10C)
> -#define IOMD_IO0CR (0x110)
> -#define IOMD_IO0ST (0x114)
> -
> -#define IOMD_IO1CURA (0x120)
> -#define IOMD_IO1ENDA (0x124)
> -#define IOMD_IO1CURB (0x128)
> -#define IOMD_IO1ENDB (0x12C)
> -#define IOMD_IO1CR (0x130)
> -#define IOMD_IO1ST (0x134)
> -
> -#define IOMD_IO2CURA (0x140)
> -#define IOMD_IO2ENDA (0x144)
> -#define IOMD_IO2CURB (0x148)
> -#define IOMD_IO2ENDB (0x14C)
> -#define IOMD_IO2CR (0x150)
> -#define IOMD_IO2ST (0x154)
> -
> -#define IOMD_IO3CURA (0x160)
> -#define IOMD_IO3ENDA (0x164)
> -#define IOMD_IO3CURB (0x168)
> -#define IOMD_IO3ENDB (0x16C)
> -#define IOMD_IO3CR (0x170)
> -#define IOMD_IO3ST (0x174)
> -#endif
> -
> -#define IOMD_SD0CURA (0x180)
> -#define IOMD_SD0ENDA (0x184)
> -#define IOMD_SD0CURB (0x188)
> -#define IOMD_SD0ENDB (0x18C)
> -#define IOMD_SD0CR (0x190)
> -#define IOMD_SD0ST (0x194)
> -
> -#ifdef CONFIG_ARCH_RPC
> -#define IOMD_SD1CURA (0x1A0)
> -#define IOMD_SD1ENDA (0x1A4)
> -#define IOMD_SD1CURB (0x1A8)
> -#define IOMD_SD1ENDB (0x1AC)
> -#define IOMD_SD1CR (0x1B0)
> -#define IOMD_SD1ST (0x1B4)
> -#endif
> -
> -#define IOMD_CURSCUR (0x1C0)
> -#define IOMD_CURSINIT (0x1C4)
> -
> -#define IOMD_VIDCUR (0x1D0)
> -#define IOMD_VIDEND (0x1D4)
> -#define IOMD_VIDSTART (0x1D8)
> -#define IOMD_VIDINIT (0x1DC)
> -#define IOMD_VIDCR (0x1E0)
> -
> -#define IOMD_DMASTAT (0x1F0)
> -#define IOMD_DMAREQ (0x1F4)
> -#define IOMD_DMAMASK (0x1F8)
> -
> -#define DMA_END_S (1 << 31)
> -#define DMA_END_L (1 << 30)
> -
> -#define DMA_CR_C 0x80
> -#define DMA_CR_D 0x40
> -#define DMA_CR_E 0x20
> -
> -#define DMA_ST_OFL 4
> -#define DMA_ST_INT 2
> -#define DMA_ST_AB 1
> -
> -/*
> - * DMA (MEMC) compatibility
> - */
> -#define HALF_SAM vram_half_sam
> -#define VDMA_ALIGNMENT (HALF_SAM * 2)
> -#define VDMA_XFERSIZE (HALF_SAM)
> -#define VDMA_INIT IOMD_VIDINIT
> -#define VDMA_START IOMD_VIDSTART
> -#define VDMA_END IOMD_VIDEND
> -
> -#ifndef __ASSEMBLY__
> -extern unsigned int vram_half_sam;
> -#define video_set_dma(start,end,offset) \
> -do { \
> - outl (SCREEN_START + start, VDMA_START); \
> - outl (SCREEN_START + end - VDMA_XFERSIZE, VDMA_END); \
> - if (offset >= end - VDMA_XFERSIZE) \
> - offset |= 0x40000000; \
> - outl (SCREEN_START + offset, VDMA_INIT); \
> -} while (0)
> -#endif
> -
> -#endif
> diff --git a/arch/arm/include/asm/hardware/memc.h b/arch/arm/include/asm/hardware/memc.h
> deleted file mode 100644
> index 1d4ebe0a9678..000000000000
> --- a/arch/arm/include/asm/hardware/memc.h
> +++ /dev/null
> @@ -1,23 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * arch/arm/include/asm/hardware/memc.h
> - *
> - * Copyright (C) Russell King.
> - */
> -#define VDMA_ALIGNMENT PAGE_SIZE
> -#define VDMA_XFERSIZE 16
> -#define VDMA_INIT 0
> -#define VDMA_START 1
> -#define VDMA_END 2
> -
> -#ifndef __ASSEMBLY__
> -extern void memc_write(unsigned int reg, unsigned long val);
> -
> -#define video_set_dma(start,end,offset) \
> -do { \
> - memc_write (VDMA_START, (start >> 2)); \
> - memc_write (VDMA_END, (end - VDMA_XFERSIZE) >> 2); \
> - memc_write (VDMA_INIT, (offset >> 2)); \
> -} while (0)
> -
> -#endif
> diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
> index e6bd9e79737c..c3661af2ca2a 100644
> --- a/arch/arm/include/asm/io.h
> +++ b/arch/arm/include/asm/io.h
> @@ -207,16 +207,13 @@ void __iomem *pci_remap_cfgspace(resource_size_t res_cookie, size_t size);
> /*
> * Now, pick up the machine-defined IO definitions
> */
> -#ifdef CONFIG_NEED_MACH_IO_H
> -#include <mach/io.h>
> -#else
> #if IS_ENABLED(CONFIG_PCMCIA) || defined(CONFIG_PCI)
> #define IO_SPACE_LIMIT ((resource_size_t)0xfffff)
> #else
> #define IO_SPACE_LIMIT ((resource_size_t)0)
> #endif
> +
> #define __io(a) __typesafe_io(PCI_IO_VIRT_BASE + ((a) & IO_SPACE_LIMIT))
> -#endif
>
> /*
> * IO port access primitives
> diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
> index 7c2fa7dcec6d..e10363ebdd1f 100644
> --- a/arch/arm/include/asm/memory.h
> +++ b/arch/arm/include/asm/memory.h
> @@ -20,9 +20,6 @@
> #include <linux/types.h>
> #include <linux/sizes.h>
>
> -#ifdef CONFIG_NEED_MACH_MEMORY_H
> -#include <mach/memory.h>
> -#endif
> #include <asm/kasan_def.h>
>
> /*
> diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
> index 42cae73fcc19..3cbbcdb63f7d 100644
> --- a/arch/arm/kernel/head-common.S
> +++ b/arch/arm/kernel/head-common.S
> @@ -221,19 +221,6 @@ str_p2: .asciz ").\n"
> ENDPROC(__error_p)
>
> __error:
> -#ifdef CONFIG_ARCH_RPC
> -/*
> - * Turn the screen red on a error - RiscPC only.
> - */
> - mov r0, #0x02000000
> - mov r3, #0x11
> - orr r3, r3, r3, lsl #8
> - orr r3, r3, r3, lsl #16
> - str r3, [r0], #4
> - str r3, [r0], #4
> - str r3, [r0], #4
> - str r3, [r0], #4
> -#endif
> 1: mov r0, r0
> b 1b
> ENDPROC(__error)
> diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
> index b12fe41e579b..2ffaea2c4c9b 100644
> --- a/arch/arm/kernel/head.S
> +++ b/arch/arm/kernel/head.S
> @@ -347,18 +347,6 @@ __create_page_tables:
> /* we don't need any serial debugging mappings */
> ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
> #endif
> -#ifdef CONFIG_ARCH_RPC
> - /*
> - * Map in screen at 0x02000000 & SCREEN2_BASE
> - * Similar reasons here - for debug. This is
> - * only for Acorn RiscPC architectures.
> - */
> - add r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
> - orr r3, r7, #0x02000000
> - str r3, [r0]
> - add r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
> - str r3, [r0]
> -#endif
> #endif
> #ifdef CONFIG_ARM_LPAE
> sub r4, r4, #0x1000 @ point to the PGD table
> diff --git a/arch/arm/lib/delay-loop.S b/arch/arm/lib/delay-loop.S
> index 33b08ca1c242..56f9eea56268 100644
> --- a/arch/arm/lib/delay-loop.S
> +++ b/arch/arm/lib/delay-loop.S
> @@ -9,10 +9,6 @@
> #include <asm/assembler.h>
> #include <asm/delay.h>
>
> -#ifdef CONFIG_ARCH_RPC
> - .arch armv4
> -#endif
> -
> .text
>
> .LC0: .word loops_per_jiffy
> diff --git a/arch/arm/mach-rpc/Kconfig b/arch/arm/mach-rpc/Kconfig
> deleted file mode 100644
> index 60b3823b690c..000000000000
> --- a/arch/arm/mach-rpc/Kconfig
> +++ /dev/null
> @@ -1,24 +0,0 @@
> -config ARCH_RPC
> - bool "RiscPC (DEPRECATED)"
> - depends on ARCH_MULTI_V4 && !(ARCH_MULTI_V4T || ARCH_MULTI_V5)
> - depends on !(ARCH_FOOTBRIDGE || ARCH_SA1100 || ARCH_MOXART || ARCH_GEMINI)
> - depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000
> - depends on CPU_LITTLE_ENDIAN
> - depends on ATAGS
> - depends on MMU
> - select ARCH_ACORN
> - select ARCH_MAY_HAVE_PC_FDC
> - select CPU_SA110
> - select FIQ
> - select HAVE_PATA_PLATFORM
> - select ISA_DMA_API
> - select LEGACY_TIMER_TICK
> - select NEED_MACH_IO_H
> - select NEED_MACH_MEMORY_H
> - select NO_IOPORT_MAP
> - help
> - On the Acorn Risc-PC, Linux can support the internal IDE disk and
> - CD-ROM interface, serial and parallel port, and the floppy drive.
> -
> - Support for these machines will go away in 2027,
> - unless there are any remaining users that speak up.
> diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile
> deleted file mode 100644
> index 90a645a18444..000000000000
> --- a/arch/arm/mach-rpc/Makefile
> +++ /dev/null
> @@ -1,9 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-only
> -#
> -# Makefile for the linux kernel.
> -#
> -
> -# Object file lists.
> -
> -obj-y :=dma.o ecard.o ecard-loader.o fiq.o floppydma.o io-acorn.o irq.o \
> - riscpc.o time.o
> diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
> deleted file mode 100644
> index 50e0f97afd75..000000000000
> --- a/arch/arm/mach-rpc/dma.c
> +++ /dev/null
> @@ -1,393 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * linux/arch/arm/mach-rpc/dma.c
> - *
> - * Copyright (C) 1998 Russell King
> - *
> - * DMA functions specific to RiscPC architecture
> - */
> -#include <linux/mman.h>
> -#include <linux/init.h>
> -#include <linux/interrupt.h>
> -#include <linux/dma-mapping.h>
> -#include <linux/io.h>
> -
> -#include <asm/page.h>
> -#include <asm/dma.h>
> -#include <asm/fiq.h>
> -#include <asm/irq.h>
> -#include <mach/hardware.h>
> -#include <linux/uaccess.h>
> -
> -#include <asm/mach/dma.h>
> -#include <asm/hardware/iomd.h>
> -
> -struct iomd_dma {
> - struct dma_struct dma;
> - void __iomem *base; /* Controller base address */
> - int irq; /* Controller IRQ */
> - unsigned int state;
> - dma_addr_t cur_addr;
> - unsigned int cur_len;
> - dma_addr_t dma_addr;
> - unsigned int dma_len;
> -};
> -
> -#if 0
> -typedef enum {
> - dma_size_8 = 1,
> - dma_size_16 = 2,
> - dma_size_32 = 4,
> - dma_size_128 = 16
> -} dma_size_t;
> -#endif
> -
> -#define TRANSFER_SIZE 2
> -
> -#define CURA (0)
> -#define ENDA (IOMD_IO0ENDA - IOMD_IO0CURA)
> -#define CURB (IOMD_IO0CURB - IOMD_IO0CURA)
> -#define ENDB (IOMD_IO0ENDB - IOMD_IO0CURA)
> -#define CR (IOMD_IO0CR - IOMD_IO0CURA)
> -#define ST (IOMD_IO0ST - IOMD_IO0CURA)
> -
> -static void iomd_get_next_sg(struct iomd_dma *idma)
> -{
> - unsigned long end, offset, flags = 0;
> -
> - if (idma->dma.sg) {
> - idma->cur_addr = idma->dma_addr;
> - offset = idma->cur_addr & ~PAGE_MASK;
> -
> - end = offset + idma->dma_len;
> -
> - if (end > PAGE_SIZE)
> - end = PAGE_SIZE;
> -
> - if (offset + TRANSFER_SIZE >= end)
> - flags |= DMA_END_L;
> -
> - idma->cur_len = end - TRANSFER_SIZE;
> -
> - idma->dma_len -= end - offset;
> - idma->dma_addr += end - offset;
> -
> - if (idma->dma_len == 0) {
> - if (idma->dma.sgcount > 1) {
> - idma->dma.sg = sg_next(idma->dma.sg);
> - idma->dma_addr = idma->dma.sg->dma_address;
> - idma->dma_len = idma->dma.sg->length;
> - idma->dma.sgcount--;
> - } else {
> - idma->dma.sg = NULL;
> - flags |= DMA_END_S;
> - }
> - }
> - } else {
> - flags = DMA_END_S | DMA_END_L;
> - idma->cur_addr = 0;
> - idma->cur_len = 0;
> - }
> -
> - idma->cur_len |= flags;
> -}
> -
> -static irqreturn_t iomd_dma_handle(int irq, void *dev_id)
> -{
> - struct iomd_dma *idma = dev_id;
> - void __iomem *base = idma->base;
> - unsigned int state = idma->state;
> - unsigned int status, cur, end;
> -
> - do {
> - status = readb(base + ST);
> - if (!(status & DMA_ST_INT))
> - goto out;
> -
> - if ((state ^ status) & DMA_ST_AB)
> - iomd_get_next_sg(idma);
> -
> - // This efficiently implements state = OFL != AB ? AB : 0
> - state = ((status >> 2) ^ status) & DMA_ST_AB;
> - if (state) {
> - cur = CURA;
> - end = ENDA;
> - } else {
> - cur = CURB;
> - end = ENDB;
> - }
> - writel(idma->cur_addr, base + cur);
> - writel(idma->cur_len, base + end);
> -
> - if (status & DMA_ST_OFL &&
> - idma->cur_len == (DMA_END_S|DMA_END_L))
> - break;
> - } while (1);
> -
> - state = ~DMA_ST_AB;
> - disable_irq_nosync(irq);
> -out:
> - idma->state = state;
> - return IRQ_HANDLED;
> -}
> -
> -static int iomd_request_dma(unsigned int chan, dma_t *dma)
> -{
> - struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
> -
> - return request_irq(idma->irq, iomd_dma_handle,
> - 0, idma->dma.device_id, idma);
> -}
> -
> -static void iomd_free_dma(unsigned int chan, dma_t *dma)
> -{
> - struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
> -
> - free_irq(idma->irq, idma);
> -}
> -
> -static struct device isa_dma_dev = {
> - .init_name = "fallback device",
> - .coherent_dma_mask = ~(dma_addr_t)0,
> - .dma_mask = &isa_dma_dev.coherent_dma_mask,
> -};
> -
> -static void iomd_enable_dma(unsigned int chan, dma_t *dma)
> -{
> - struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
> - void __iomem *base = idma->base;
> - unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E;
> -
> - if (idma->dma.invalid) {
> - idma->dma.invalid = 0;
> -
> - /*
> - * Cope with ISA-style drivers which expect cache
> - * coherence.
> - */
> - if (!idma->dma.sg) {
> - idma->dma.sg = &idma->dma.buf;
> - idma->dma.sgcount = 1;
> - idma->dma.buf.length = idma->dma.count;
> - idma->dma.buf.dma_address = dma_map_single(&isa_dma_dev,
> - idma->dma.addr, idma->dma.count,
> - idma->dma.dma_mode == DMA_MODE_READ ?
> - DMA_FROM_DEVICE : DMA_TO_DEVICE);
> - }
> -
> - idma->dma_addr = idma->dma.sg->dma_address;
> - idma->dma_len = idma->dma.sg->length;
> -
> - writeb(DMA_CR_C, base + CR);
> - idma->state = DMA_ST_AB;
> - }
> -
> - if (idma->dma.dma_mode == DMA_MODE_READ)
> - ctrl |= DMA_CR_D;
> -
> - writeb(ctrl, base + CR);
> - enable_irq(idma->irq);
> -}
> -
> -static void iomd_disable_dma(unsigned int chan, dma_t *dma)
> -{
> - struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
> - void __iomem *base = idma->base;
> - unsigned long flags;
> -
> - local_irq_save(flags);
> - if (idma->state != ~DMA_ST_AB)
> - disable_irq(idma->irq);
> - writeb(0, base + CR);
> - local_irq_restore(flags);
> -}
> -
> -static int iomd_set_dma_speed(unsigned int chan, dma_t *dma, int cycle)
> -{
> - int tcr, speed;
> -
> - if (cycle < 188)
> - speed = 3;
> - else if (cycle <= 250)
> - speed = 2;
> - else if (cycle < 438)
> - speed = 1;
> - else
> - speed = 0;
> -
> - tcr = iomd_readb(IOMD_DMATCR);
> - speed &= 3;
> -
> - switch (chan) {
> - case DMA_0:
> - tcr = (tcr & ~0x03) | speed;
> - break;
> -
> - case DMA_1:
> - tcr = (tcr & ~0x0c) | (speed << 2);
> - break;
> -
> - case DMA_2:
> - tcr = (tcr & ~0x30) | (speed << 4);
> - break;
> -
> - case DMA_3:
> - tcr = (tcr & ~0xc0) | (speed << 6);
> - break;
> -
> - default:
> - break;
> - }
> -
> - iomd_writeb(tcr, IOMD_DMATCR);
> -
> - return speed;
> -}
> -
> -static struct dma_ops iomd_dma_ops = {
> - .type = "IOMD",
> - .request = iomd_request_dma,
> - .free = iomd_free_dma,
> - .enable = iomd_enable_dma,
> - .disable = iomd_disable_dma,
> - .setspeed = iomd_set_dma_speed,
> -};
> -
> -static struct fiq_handler fh = {
> - .name = "floppydma"
> -};
> -
> -struct floppy_dma {
> - struct dma_struct dma;
> - unsigned int fiq;
> -};
> -
> -static void floppy_enable_dma(unsigned int chan, dma_t *dma)
> -{
> - struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma);
> - void *fiqhandler_start;
> - unsigned int fiqhandler_length;
> - struct pt_regs regs;
> -
> - if (fdma->dma.sg)
> - BUG();
> -
> - if (fdma->dma.dma_mode == DMA_MODE_READ) {
> - extern unsigned char floppy_fiqin_start, floppy_fiqin_end;
> - fiqhandler_start = &floppy_fiqin_start;
> - fiqhandler_length = &floppy_fiqin_end - &floppy_fiqin_start;
> - } else {
> - extern unsigned char floppy_fiqout_start, floppy_fiqout_end;
> - fiqhandler_start = &floppy_fiqout_start;
> - fiqhandler_length = &floppy_fiqout_end - &floppy_fiqout_start;
> - }
> -
> - regs.ARM_r9 = fdma->dma.count;
> - regs.ARM_r10 = (unsigned long)fdma->dma.addr;
> - regs.ARM_fp = (unsigned long)FLOPPYDMA_BASE;
> -
> - if (claim_fiq(&fh)) {
> - printk("floppydma: couldn't claim FIQ.\n");
> - return;
> - }
> -
> - set_fiq_handler(fiqhandler_start, fiqhandler_length);
> - set_fiq_regs(®s);
> - enable_fiq(fdma->fiq);
> -}
> -
> -static void floppy_disable_dma(unsigned int chan, dma_t *dma)
> -{
> - struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma);
> - disable_fiq(fdma->fiq);
> - release_fiq(&fh);
> -}
> -
> -static int floppy_get_residue(unsigned int chan, dma_t *dma)
> -{
> - struct pt_regs regs;
> - get_fiq_regs(®s);
> - return regs.ARM_r9;
> -}
> -
> -static struct dma_ops floppy_dma_ops = {
> - .type = "FIQDMA",
> - .enable = floppy_enable_dma,
> - .disable = floppy_disable_dma,
> - .residue = floppy_get_residue,
> -};
> -
> -/*
> - * This is virtual DMA - we don't need anything here.
> - */
> -static void sound_enable_disable_dma(unsigned int chan, dma_t *dma)
> -{
> -}
> -
> -static struct dma_ops sound_dma_ops = {
> - .type = "VIRTUAL",
> - .enable = sound_enable_disable_dma,
> - .disable = sound_enable_disable_dma,
> -};
> -
> -static struct iomd_dma iomd_dma[6];
> -
> -static struct floppy_dma floppy_dma = {
> - .dma = {
> - .d_ops = &floppy_dma_ops,
> - },
> - .fiq = FIQ_FLOPPYDATA,
> -};
> -
> -static dma_t sound_dma = {
> - .d_ops = &sound_dma_ops,
> -};
> -
> -static int __init rpc_dma_init(void)
> -{
> - unsigned int i;
> - int ret;
> -
> - iomd_writeb(0, IOMD_IO0CR);
> - iomd_writeb(0, IOMD_IO1CR);
> - iomd_writeb(0, IOMD_IO2CR);
> - iomd_writeb(0, IOMD_IO3CR);
> -
> - iomd_writeb(0xa0, IOMD_DMATCR);
> -
> - /*
> - * Setup DMA channels 2,3 to be for podules
> - * and channels 0,1 for internal devices
> - */
> - iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT);
> -
> - iomd_dma[DMA_0].base = IOMD_BASE + IOMD_IO0CURA;
> - iomd_dma[DMA_0].irq = IRQ_DMA0;
> - iomd_dma[DMA_1].base = IOMD_BASE + IOMD_IO1CURA;
> - iomd_dma[DMA_1].irq = IRQ_DMA1;
> - iomd_dma[DMA_2].base = IOMD_BASE + IOMD_IO2CURA;
> - iomd_dma[DMA_2].irq = IRQ_DMA2;
> - iomd_dma[DMA_3].base = IOMD_BASE + IOMD_IO3CURA;
> - iomd_dma[DMA_3].irq = IRQ_DMA3;
> - iomd_dma[DMA_S0].base = IOMD_BASE + IOMD_SD0CURA;
> - iomd_dma[DMA_S0].irq = IRQ_DMAS0;
> - iomd_dma[DMA_S1].base = IOMD_BASE + IOMD_SD1CURA;
> - iomd_dma[DMA_S1].irq = IRQ_DMAS1;
> -
> - for (i = DMA_0; i <= DMA_S1; i++) {
> - iomd_dma[i].dma.d_ops = &iomd_dma_ops;
> -
> - ret = isa_dma_add(i, &iomd_dma[i].dma);
> - if (ret)
> - printk("IOMDDMA%u: unable to register: %d\n", i, ret);
> - }
> -
> - ret = isa_dma_add(DMA_VIRTUAL_FLOPPY, &floppy_dma.dma);
> - if (ret)
> - printk("IOMDFLOPPY: unable to register: %d\n", ret);
> - ret = isa_dma_add(DMA_VIRTUAL_SOUND, &sound_dma);
> - if (ret)
> - printk("IOMDSOUND: unable to register: %d\n", ret);
> - return 0;
> -}
> -core_initcall(rpc_dma_init);
> diff --git a/arch/arm/mach-rpc/ecard-loader.S b/arch/arm/mach-rpc/ecard-loader.S
> deleted file mode 100644
> index eb8ac0412da6..000000000000
> --- a/arch/arm/mach-rpc/ecard-loader.S
> +++ /dev/null
> @@ -1,40 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * linux/arch/arm/lib/ecard.S
> - *
> - * Copyright (C) 1995, 1996 Russell King
> - *
> - * 27/03/03 Ian Molton Clean up CONFIG_CPU
> - */
> -#include <linux/linkage.h>
> -#include <asm/assembler.h>
> -
> -#define CPSR2SPSR(rt) \
> - mrs rt, cpsr; \
> - msr spsr_cxsf, rt
> -
> -@ Purpose: call an expansion card loader to read bytes.
> -@ Proto : char read_loader(int offset, char *card_base, char *loader);
> -@ Returns: byte read
> -
> -ENTRY(ecard_loader_read)
> - stmfd sp!, {r4 - r12, lr}
> - mov r11, r1
> - mov r1, r0
> - CPSR2SPSR(r0)
> - mov lr, pc
> - mov pc, r2
> - ldmfd sp!, {r4 - r12, pc}
> -
> -@ Purpose: call an expansion card loader to reset the card
> -@ Proto : void read_loader(int card_base, char *loader);
> -@ Returns: byte read
> -
> -ENTRY(ecard_loader_reset)
> - stmfd sp!, {r4 - r12, lr}
> - mov r11, r0
> - CPSR2SPSR(r0)
> - mov lr, pc
> - add pc, r1, #8
> - ldmfd sp!, {r4 - r12, pc}
> -
> diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c
> deleted file mode 100644
> index 972465840548..000000000000
> --- a/arch/arm/mach-rpc/ecard.c
> +++ /dev/null
> @@ -1,1146 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * linux/arch/arm/kernel/ecard.c
> - *
> - * Copyright 1995-2001 Russell King
> - *
> - * Find all installed expansion cards, and handle interrupts from them.
> - *
> - * Created from information from Acorns RiscOS3 PRMs
> - *
> - * 08-Dec-1996 RMK Added code for the 9'th expansion card - the ether
> - * podule slot.
> - * 06-May-1997 RMK Added blacklist for cards whose loader doesn't work.
> - * 12-Sep-1997 RMK Created new handling of interrupt enables/disables
> - * - cards can now register their own routine to control
> - * interrupts (recommended).
> - * 29-Sep-1997 RMK Expansion card interrupt hardware not being re-enabled
> - * on reset from Linux. (Caused cards not to respond
> - * under RiscOS without hard reset).
> - * 15-Feb-1998 RMK Added DMA support
> - * 12-Sep-1998 RMK Added EASI support
> - * 10-Jan-1999 RMK Run loaders in a simulated RISC OS environment.
> - * 17-Apr-1999 RMK Support for EASI Type C cycles.
> - */
> -#define ECARD_C
> -
> -#include <linux/module.h>
> -#include <linux/kernel.h>
> -#include <linux/types.h>
> -#include <linux/sched.h>
> -#include <linux/sched/mm.h>
> -#include <linux/interrupt.h>
> -#include <linux/completion.h>
> -#include <linux/reboot.h>
> -#include <linux/mm.h>
> -#include <linux/slab.h>
> -#include <linux/proc_fs.h>
> -#include <linux/seq_file.h>
> -#include <linux/device.h>
> -#include <linux/init.h>
> -#include <linux/mutex.h>
> -#include <linux/kthread.h>
> -#include <linux/irq.h>
> -#include <linux/io.h>
> -
> -#include <asm/dma.h>
> -#include <asm/ecard.h>
> -#include <mach/hardware.h>
> -#include <asm/irq.h>
> -#include <asm/mmu_context.h>
> -#include <asm/mach/irq.h>
> -#include <asm/tlbflush.h>
> -
> -#include "ecard.h"
> -
> -struct ecard_request {
> - void (*fn)(struct ecard_request *);
> - ecard_t *ec;
> - unsigned int address;
> - unsigned int length;
> - unsigned int use_loader;
> - void *buffer;
> - struct completion *complete;
> -};
> -
> -struct expcard_quirklist {
> - unsigned short manufacturer;
> - unsigned short product;
> - const char *type;
> - void (*init)(ecard_t *ec);
> -};
> -
> -static ecard_t *cards;
> -static ecard_t *slot_to_expcard[MAX_ECARDS];
> -static unsigned int ectcr;
> -
> -static void atomwide_3p_quirk(ecard_t *ec);
> -
> -/* List of descriptions of cards which don't have an extended
> - * identification, or chunk directories containing a description.
> - */
> -static struct expcard_quirklist quirklist[] __initdata = {
> - { MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" },
> - { MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, NULL, atomwide_3p_quirk },
> -};
> -
> -asmlinkage extern int
> -ecard_loader_reset(unsigned long base, loader_t loader);
> -asmlinkage extern int
> -ecard_loader_read(int off, unsigned long base, loader_t loader);
> -
> -static inline unsigned short ecard_getu16(unsigned char *v)
> -{
> - return v[0] | v[1] << 8;
> -}
> -
> -static inline signed long ecard_gets24(unsigned char *v)
> -{
> - return v[0] | v[1] << 8 | v[2] << 16 | ((v[2] & 0x80) ? 0xff000000 : 0);
> -}
> -
> -static inline ecard_t *slot_to_ecard(unsigned int slot)
> -{
> - return slot < MAX_ECARDS ? slot_to_expcard[slot] : NULL;
> -}
> -
> -/* ===================== Expansion card daemon ======================== */
> -/*
> - * Since the loader programs on the expansion cards need to be run
> - * in a specific environment, create a separate task with this
> - * environment up, and pass requests to this task as and when we
> - * need to.
> - *
> - * This should allow 99% of loaders to be called from Linux.
> - *
> - * From a security standpoint, we trust the card vendors. This
> - * may be a misplaced trust.
> - */
> -static void ecard_task_reset(struct ecard_request *req)
> -{
> - struct expansion_card *ec = req->ec;
> - struct resource *res;
> -
> - res = ec->slot_no == 8
> - ? &ec->resource[ECARD_RES_MEMC]
> - : ec->easi
> - ? &ec->resource[ECARD_RES_EASI]
> - : &ec->resource[ECARD_RES_IOCSYNC];
> -
> - ecard_loader_reset(res->start, ec->loader);
> -}
> -
> -static void ecard_task_readbytes(struct ecard_request *req)
> -{
> - struct expansion_card *ec = req->ec;
> - unsigned char *buf = req->buffer;
> - unsigned int len = req->length;
> - unsigned int off = req->address;
> -
> - if (ec->slot_no == 8) {
> - void __iomem *base = (void __iomem *)
> - ec->resource[ECARD_RES_MEMC].start;
> -
> - /*
> - * The card maintains an index which increments the address
> - * into a 4096-byte page on each access. We need to keep
> - * track of the counter.
> - */
> - static unsigned int index;
> - unsigned int page;
> -
> - page = (off >> 12) * 4;
> - if (page > 256 * 4)
> - return;
> -
> - off &= 4095;
> -
> - /*
> - * If we are reading offset 0, or our current index is
> - * greater than the offset, reset the hardware index counter.
> - */
> - if (off == 0 || index > off) {
> - writeb(0, base);
> - index = 0;
> - }
> -
> - /*
> - * Increment the hardware index counter until we get to the
> - * required offset. The read bytes are discarded.
> - */
> - while (index < off) {
> - readb(base + page);
> - index += 1;
> - }
> -
> - while (len--) {
> - *buf++ = readb(base + page);
> - index += 1;
> - }
> - } else {
> - unsigned long base = (ec->easi
> - ? &ec->resource[ECARD_RES_EASI]
> - : &ec->resource[ECARD_RES_IOCSYNC])->start;
> - void __iomem *pbase = (void __iomem *)base;
> -
> - if (!req->use_loader || !ec->loader) {
> - off *= 4;
> - while (len--) {
> - *buf++ = readb(pbase + off);
> - off += 4;
> - }
> - } else {
> - while(len--) {
> - /*
> - * The following is required by some
> - * expansion card loader programs.
> - */
> - *(unsigned long *)0x108 = 0;
> - *buf++ = ecard_loader_read(off++, base,
> - ec->loader);
> - }
> - }
> - }
> -
> -}
> -
> -static DECLARE_WAIT_QUEUE_HEAD(ecard_wait);
> -static struct ecard_request *ecard_req;
> -static DEFINE_MUTEX(ecard_mutex);
> -
> -/*
> - * Set up the expansion card daemon's page tables.
> - */
> -static void ecard_init_pgtables(struct mm_struct *mm)
> -{
> - struct vm_area_struct vma = TLB_FLUSH_VMA(mm, VM_EXEC);
> -
> - /* We want to set up the page tables for the following mapping:
> - * Virtual Physical
> - * 0x03000000 0x03000000
> - * 0x03010000 unmapped
> - * 0x03210000 0x03210000
> - * 0x03400000 unmapped
> - * 0x08000000 0x08000000
> - * 0x10000000 unmapped
> - *
> - * FIXME: we don't follow this 100% yet.
> - */
> - pgd_t *src_pgd, *dst_pgd;
> -
> - src_pgd = pgd_offset(mm, (unsigned long)IO_BASE);
> - dst_pgd = pgd_offset(mm, IO_START);
> -
> - memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (IO_SIZE / PGDIR_SIZE));
> -
> - src_pgd = pgd_offset(mm, (unsigned long)EASI_BASE);
> - dst_pgd = pgd_offset(mm, EASI_START);
> -
> - memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
> -
> - flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);
> - flush_tlb_range(&vma, EASI_START, EASI_START + EASI_SIZE);
> -}
> -
> -static int ecard_init_mm(void)
> -{
> - struct mm_struct * mm = mm_alloc();
> - struct mm_struct *active_mm = current->active_mm;
> -
> - if (!mm)
> - return -ENOMEM;
> -
> - current->mm = mm;
> - current->active_mm = mm;
> - activate_mm(active_mm, mm);
> - mmdrop_lazy_tlb(active_mm);
> - ecard_init_pgtables(mm);
> - return 0;
> -}
> -
> -static int
> -ecard_task(void * unused)
> -{
> - /*
> - * Allocate a mm. We're not a lazy-TLB kernel task since we need
> - * to set page table entries where the user space would be. Note
> - * that this also creates the page tables. Failure is not an
> - * option here.
> - */
> - if (ecard_init_mm())
> - panic("kecardd: unable to alloc mm\n");
> -
> - while (1) {
> - struct ecard_request *req;
> -
> - wait_event_interruptible(ecard_wait, ecard_req != NULL);
> -
> - req = xchg(&ecard_req, NULL);
> - if (req != NULL) {
> - req->fn(req);
> - complete(req->complete);
> - }
> - }
> -}
> -
> -/*
> - * Wake the expansion card daemon to action our request.
> - *
> - * FIXME: The test here is not sufficient to detect if the
> - * kcardd is running.
> - */
> -static void ecard_call(struct ecard_request *req)
> -{
> - DECLARE_COMPLETION_ONSTACK(completion);
> -
> - req->complete = &completion;
> -
> - mutex_lock(&ecard_mutex);
> - ecard_req = req;
> - wake_up(&ecard_wait);
> -
> - /*
> - * Now wait for kecardd to run.
> - */
> - wait_for_completion(&completion);
> - mutex_unlock(&ecard_mutex);
> -}
> -
> -/* ======================= Mid-level card control ===================== */
> -
> -static void
> -ecard_readbytes(void *addr, ecard_t *ec, int off, int len, int useld)
> -{
> - struct ecard_request req;
> -
> - req.fn = ecard_task_readbytes;
> - req.ec = ec;
> - req.address = off;
> - req.length = len;
> - req.use_loader = useld;
> - req.buffer = addr;
> -
> - ecard_call(&req);
> -}
> -
> -int ecard_readchunk(struct in_chunk_dir *cd, ecard_t *ec, int id, int num)
> -{
> - struct ex_chunk_dir excd;
> - int index = 16;
> - int useld = 0;
> -
> - if (!ec->cid.cd)
> - return 0;
> -
> - while(1) {
> - ecard_readbytes(&excd, ec, index, 8, useld);
> - index += 8;
> - if (c_id(&excd) == 0) {
> - if (!useld && ec->loader) {
> - useld = 1;
> - index = 0;
> - continue;
> - }
> - return 0;
> - }
> - if (c_id(&excd) == 0xf0) { /* link */
> - index = c_start(&excd);
> - continue;
> - }
> - if (c_id(&excd) == 0x80) { /* loader */
> - if (!ec->loader) {
> - ec->loader = kmalloc(c_len(&excd),
> - GFP_KERNEL);
> - if (ec->loader)
> - ecard_readbytes(ec->loader, ec,
> - (int)c_start(&excd),
> - c_len(&excd), useld);
> - else
> - return 0;
> - }
> - continue;
> - }
> - if (c_id(&excd) == id && num-- == 0)
> - break;
> - }
> -
> - if (c_id(&excd) & 0x80) {
> - switch (c_id(&excd) & 0x70) {
> - case 0x70:
> - ecard_readbytes((unsigned char *)excd.d.string, ec,
> - (int)c_start(&excd), c_len(&excd),
> - useld);
> - break;
> - case 0x00:
> - break;
> - }
> - }
> - cd->start_offset = c_start(&excd);
> - memcpy(cd->d.string, excd.d.string, 256);
> - return 1;
> -}
> -
> -/* ======================= Interrupt control ============================ */
> -
> -static void ecard_def_irq_enable(ecard_t *ec, int irqnr)
> -{
> -}
> -
> -static void ecard_def_irq_disable(ecard_t *ec, int irqnr)
> -{
> -}
> -
> -static int ecard_def_irq_pending(ecard_t *ec)
> -{
> - return !ec->irqmask || readb(ec->irqaddr) & ec->irqmask;
> -}
> -
> -static void ecard_def_fiq_enable(ecard_t *ec, int fiqnr)
> -{
> - panic("ecard_def_fiq_enable called - impossible");
> -}
> -
> -static void ecard_def_fiq_disable(ecard_t *ec, int fiqnr)
> -{
> - panic("ecard_def_fiq_disable called - impossible");
> -}
> -
> -static int ecard_def_fiq_pending(ecard_t *ec)
> -{
> - return !ec->fiqmask || readb(ec->fiqaddr) & ec->fiqmask;
> -}
> -
> -static expansioncard_ops_t ecard_default_ops = {
> - ecard_def_irq_enable,
> - ecard_def_irq_disable,
> - ecard_def_irq_pending,
> - ecard_def_fiq_enable,
> - ecard_def_fiq_disable,
> - ecard_def_fiq_pending
> -};
> -
> -/*
> - * Enable and disable interrupts from expansion cards.
> - * (interrupts are disabled for these functions).
> - *
> - * They are not meant to be called directly, but via enable/disable_irq.
> - */
> -static void ecard_irq_unmask(struct irq_data *d)
> -{
> - ecard_t *ec = irq_data_get_irq_chip_data(d);
> -
> - if (ec) {
> - if (!ec->ops)
> - ec->ops = &ecard_default_ops;
> -
> - if (ec->claimed && ec->ops->irqenable)
> - ec->ops->irqenable(ec, d->irq);
> - else
> - printk(KERN_ERR "ecard: rejecting request to "
> - "enable IRQs for %d\n", d->irq);
> - }
> -}
> -
> -static void ecard_irq_mask(struct irq_data *d)
> -{
> - ecard_t *ec = irq_data_get_irq_chip_data(d);
> -
> - if (ec) {
> - if (!ec->ops)
> - ec->ops = &ecard_default_ops;
> -
> - if (ec->ops && ec->ops->irqdisable)
> - ec->ops->irqdisable(ec, d->irq);
> - }
> -}
> -
> -static struct irq_chip ecard_chip = {
> - .name = "ECARD",
> - .irq_ack = ecard_irq_mask,
> - .irq_mask = ecard_irq_mask,
> - .irq_unmask = ecard_irq_unmask,
> -};
> -
> -void ecard_enablefiq(unsigned int fiqnr)
> -{
> - ecard_t *ec = slot_to_ecard(fiqnr);
> -
> - if (ec) {
> - if (!ec->ops)
> - ec->ops = &ecard_default_ops;
> -
> - if (ec->claimed && ec->ops->fiqenable)
> - ec->ops->fiqenable(ec, fiqnr);
> - else
> - printk(KERN_ERR "ecard: rejecting request to "
> - "enable FIQs for %d\n", fiqnr);
> - }
> -}
> -
> -void ecard_disablefiq(unsigned int fiqnr)
> -{
> - ecard_t *ec = slot_to_ecard(fiqnr);
> -
> - if (ec) {
> - if (!ec->ops)
> - ec->ops = &ecard_default_ops;
> -
> - if (ec->ops->fiqdisable)
> - ec->ops->fiqdisable(ec, fiqnr);
> - }
> -}
> -
> -static void ecard_dump_irq_state(void)
> -{
> - ecard_t *ec;
> -
> - printk("Expansion card IRQ state:\n");
> -
> - for (ec = cards; ec; ec = ec->next) {
> - const char *claimed;
> -
> - if (ec->slot_no == 8)
> - continue;
> -
> - claimed = ec->claimed ? "" : "not ";
> -
> - if (ec->ops && ec->ops->irqpending &&
> - ec->ops != &ecard_default_ops)
> - printk(" %d: %sclaimed irq %spending\n",
> - ec->slot_no, claimed,
> - ec->ops->irqpending(ec) ? "" : "not ");
> - else
> - printk(" %d: %sclaimed irqaddr %p, mask = %02X, status = %02X\n",
> - ec->slot_no, claimed,
> - ec->irqaddr, ec->irqmask, readb(ec->irqaddr));
> - }
> -}
> -
> -static void ecard_check_lockup(struct irq_desc *desc)
> -{
> - static unsigned long last;
> - static int lockup;
> -
> - /*
> - * If the timer interrupt has not run since the last million
> - * unrecognised expansion card interrupts, then there is
> - * something seriously wrong. Disable the expansion card
> - * interrupts so at least we can continue.
> - *
> - * Maybe we ought to start a timer to re-enable them some time
> - * later?
> - */
> - if (last == jiffies) {
> - lockup += 1;
> - if (lockup > 1000000) {
> - printk(KERN_ERR "\nInterrupt lockup detected - "
> - "disabling all expansion card interrupts\n");
> -
> - desc->irq_data.chip->irq_mask(&desc->irq_data);
> - ecard_dump_irq_state();
> - }
> - } else
> - lockup = 0;
> -
> - /*
> - * If we did not recognise the source of this interrupt,
> - * warn the user, but don't flood the user with these messages.
> - */
> - if (!last || time_after(jiffies, last + 5*HZ)) {
> - last = jiffies;
> - printk(KERN_WARNING "Unrecognised interrupt from backplane\n");
> - ecard_dump_irq_state();
> - }
> -}
> -
> -static void ecard_irq_handler(struct irq_desc *desc)
> -{
> - ecard_t *ec;
> - int called = 0;
> -
> - desc->irq_data.chip->irq_mask(&desc->irq_data);
> - for (ec = cards; ec; ec = ec->next) {
> - int pending;
> -
> - if (!ec->claimed || !ec->irq || ec->slot_no == 8)
> - continue;
> -
> - if (ec->ops && ec->ops->irqpending)
> - pending = ec->ops->irqpending(ec);
> - else
> - pending = ecard_default_ops.irqpending(ec);
> -
> - if (pending) {
> - generic_handle_irq(ec->irq);
> - called ++;
> - }
> - }
> - desc->irq_data.chip->irq_unmask(&desc->irq_data);
> -
> - if (called == 0)
> - ecard_check_lockup(desc);
> -}
> -
> -static void __iomem *__ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
> -{
> - void __iomem *address = NULL;
> - int slot = ec->slot_no;
> -
> - if (ec->slot_no == 8)
> - return ECARD_MEMC8_BASE;
> -
> - ectcr &= ~(1 << slot);
> -
> - switch (type) {
> - case ECARD_MEMC:
> - if (slot < 4)
> - address = ECARD_MEMC_BASE + (slot << 14);
> - break;
> -
> - case ECARD_IOC:
> - if (slot < 4)
> - address = ECARD_IOC_BASE + (slot << 14);
> - else
> - address = ECARD_IOC4_BASE + ((slot - 4) << 14);
> - if (address)
> - address += speed << 19;
> - break;
> -
> - case ECARD_EASI:
> - address = ECARD_EASI_BASE + (slot << 24);
> - if (speed == ECARD_FAST)
> - ectcr |= 1 << slot;
> - break;
> -
> - default:
> - break;
> - }
> -
> -#ifdef IOMD_ECTCR
> - iomd_writeb(ectcr, IOMD_ECTCR);
> -#endif
> - return address;
> -}
> -
> -static int ecard_prints(struct seq_file *m, ecard_t *ec)
> -{
> - seq_printf(m, " %d: %s ", ec->slot_no, ec->easi ? "EASI" : " ");
> -
> - if (ec->cid.id == 0) {
> - struct in_chunk_dir incd;
> -
> - seq_printf(m, "[%04X:%04X] ",
> - ec->cid.manufacturer, ec->cid.product);
> -
> - if (!ec->card_desc && ec->cid.cd &&
> - ecard_readchunk(&incd, ec, 0xf5, 0)) {
> - ec->card_desc = kmalloc(strlen(incd.d.string)+1, GFP_KERNEL);
> -
> - if (ec->card_desc)
> - strcpy((char *)ec->card_desc, incd.d.string);
> - }
> -
> - seq_printf(m, "%s\n", ec->card_desc ? ec->card_desc : "*unknown*");
> - } else
> - seq_printf(m, "Simple card %d\n", ec->cid.id);
> -
> - return 0;
> -}
> -
> -static int ecard_devices_proc_show(struct seq_file *m, void *v)
> -{
> - ecard_t *ec = cards;
> -
> - while (ec) {
> - ecard_prints(m, ec);
> - ec = ec->next;
> - }
> - return 0;
> -}
> -
> -static struct proc_dir_entry *proc_bus_ecard_dir = NULL;
> -
> -static void ecard_proc_init(void)
> -{
> - proc_bus_ecard_dir = proc_mkdir("bus/ecard", NULL);
> - proc_create_single("devices", 0, proc_bus_ecard_dir,
> - ecard_devices_proc_show);
> -}
> -
> -#define ec_set_resource(ec,nr,st,sz) \
> - do { \
> - (ec)->resource[nr].name = dev_name(&ec->dev); \
> - (ec)->resource[nr].start = st; \
> - (ec)->resource[nr].end = (st) + (sz) - 1; \
> - (ec)->resource[nr].flags = IORESOURCE_MEM; \
> - } while (0)
> -
> -static void __init ecard_free_card(struct expansion_card *ec)
> -{
> - int i;
> -
> - for (i = 0; i < ECARD_NUM_RESOURCES; i++)
> - if (ec->resource[i].flags)
> - release_resource(&ec->resource[i]);
> -
> - kfree(ec);
> -}
> -
> -static struct expansion_card *__init ecard_alloc_card(int type, int slot)
> -{
> - struct expansion_card *ec;
> - unsigned long base;
> - int i;
> -
> - ec = kzalloc_obj(ecard_t);
> - if (!ec) {
> - ec = ERR_PTR(-ENOMEM);
> - goto nomem;
> - }
> -
> - ec->slot_no = slot;
> - ec->easi = type == ECARD_EASI;
> - ec->irq = 0;
> - ec->fiq = 0;
> - ec->dma = NO_DMA;
> - ec->ops = &ecard_default_ops;
> -
> - dev_set_name(&ec->dev, "ecard%d", slot);
> - ec->dev.parent = NULL;
> - ec->dev.bus = &ecard_bus_type;
> - ec->dev.dma_mask = &ec->dma_mask;
> - ec->dma_mask = (u64)0xffffffff;
> - ec->dev.coherent_dma_mask = ec->dma_mask;
> -
> - if (slot < 4) {
> - ec_set_resource(ec, ECARD_RES_MEMC,
> - PODSLOT_MEMC_BASE + (slot << 14),
> - PODSLOT_MEMC_SIZE);
> - base = PODSLOT_IOC0_BASE + (slot << 14);
> - } else
> - base = PODSLOT_IOC4_BASE + ((slot - 4) << 14);
> -
> -#ifdef CONFIG_ARCH_RPC
> - if (slot < 8) {
> - ec_set_resource(ec, ECARD_RES_EASI,
> - PODSLOT_EASI_BASE + (slot << 24),
> - PODSLOT_EASI_SIZE);
> - }
> -
> - if (slot == 8) {
> - ec_set_resource(ec, ECARD_RES_MEMC, NETSLOT_BASE, NETSLOT_SIZE);
> - } else
> -#endif
> -
> - for (i = 0; i <= ECARD_RES_IOCSYNC - ECARD_RES_IOCSLOW; i++)
> - ec_set_resource(ec, i + ECARD_RES_IOCSLOW,
> - base + (i << 19), PODSLOT_IOC_SIZE);
> -
> - for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
> - if (ec->resource[i].flags &&
> - request_resource(&iomem_resource, &ec->resource[i])) {
> - dev_err(&ec->dev, "resource(s) not available\n");
> - ec->resource[i].end -= ec->resource[i].start;
> - ec->resource[i].start = 0;
> - ec->resource[i].flags = 0;
> - }
> - }
> -
> - nomem:
> - return ec;
> -}
> -
> -static ssize_t irq_show(struct device *dev, struct device_attribute *attr, char *buf)
> -{
> - struct expansion_card *ec = ECARD_DEV(dev);
> - return sprintf(buf, "%u\n", ec->irq);
> -}
> -static DEVICE_ATTR_RO(irq);
> -
> -static ssize_t dma_show(struct device *dev, struct device_attribute *attr, char *buf)
> -{
> - struct expansion_card *ec = ECARD_DEV(dev);
> - return sprintf(buf, "%u\n", ec->dma);
> -}
> -static DEVICE_ATTR_RO(dma);
> -
> -static ssize_t resource_show(struct device *dev, struct device_attribute *attr, char *buf)
> -{
> - struct expansion_card *ec = ECARD_DEV(dev);
> - char *str = buf;
> - int i;
> -
> - for (i = 0; i < ECARD_NUM_RESOURCES; i++)
> - str += sprintf(str, "%08x %08x %08lx\n",
> - ec->resource[i].start,
> - ec->resource[i].end,
> - ec->resource[i].flags);
> -
> - return str - buf;
> -}
> -static DEVICE_ATTR_RO(resource);
> -
> -static ssize_t vendor_show(struct device *dev, struct device_attribute *attr, char *buf)
> -{
> - struct expansion_card *ec = ECARD_DEV(dev);
> - return sprintf(buf, "%u\n", ec->cid.manufacturer);
> -}
> -static DEVICE_ATTR_RO(vendor);
> -
> -static ssize_t device_show(struct device *dev, struct device_attribute *attr, char *buf)
> -{
> - struct expansion_card *ec = ECARD_DEV(dev);
> - return sprintf(buf, "%u\n", ec->cid.product);
> -}
> -static DEVICE_ATTR_RO(device);
> -
> -static ssize_t type_show(struct device *dev, struct device_attribute *attr, char *buf)
> -{
> - struct expansion_card *ec = ECARD_DEV(dev);
> - return sprintf(buf, "%s\n", ec->easi ? "EASI" : "IOC");
> -}
> -static DEVICE_ATTR_RO(type);
> -
> -static struct attribute *ecard_dev_attrs[] = {
> - &dev_attr_device.attr,
> - &dev_attr_dma.attr,
> - &dev_attr_irq.attr,
> - &dev_attr_resource.attr,
> - &dev_attr_type.attr,
> - &dev_attr_vendor.attr,
> - NULL,
> -};
> -ATTRIBUTE_GROUPS(ecard_dev);
> -
> -int ecard_request_resources(struct expansion_card *ec)
> -{
> - int i, err = 0;
> -
> - for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
> - if (ecard_resource_end(ec, i) &&
> - !request_mem_region(ecard_resource_start(ec, i),
> - ecard_resource_len(ec, i),
> - ec->dev.driver->name)) {
> - err = -EBUSY;
> - break;
> - }
> - }
> -
> - if (err) {
> - while (i--)
> - if (ecard_resource_end(ec, i))
> - release_mem_region(ecard_resource_start(ec, i),
> - ecard_resource_len(ec, i));
> - }
> - return err;
> -}
> -EXPORT_SYMBOL(ecard_request_resources);
> -
> -void ecard_release_resources(struct expansion_card *ec)
> -{
> - int i;
> -
> - for (i = 0; i < ECARD_NUM_RESOURCES; i++)
> - if (ecard_resource_end(ec, i))
> - release_mem_region(ecard_resource_start(ec, i),
> - ecard_resource_len(ec, i));
> -}
> -EXPORT_SYMBOL(ecard_release_resources);
> -
> -void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data)
> -{
> - ec->irq_data = irq_data;
> - barrier();
> - ec->ops = ops;
> -}
> -EXPORT_SYMBOL(ecard_setirq);
> -
> -void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
> - unsigned long offset, unsigned long maxsize)
> -{
> - unsigned long start = ecard_resource_start(ec, res);
> - unsigned long end = ecard_resource_end(ec, res);
> -
> - if (offset > (end - start))
> - return NULL;
> -
> - start += offset;
> - if (maxsize && end - start > maxsize)
> - end = start + maxsize;
> -
> - return devm_ioremap(&ec->dev, start, end - start);
> -}
> -EXPORT_SYMBOL(ecardm_iomap);
> -
> -static void atomwide_3p_quirk(ecard_t *ec)
> -{
> - void __iomem *addr = __ecard_address(ec, ECARD_IOC, ECARD_SYNC);
> - unsigned int i;
> -
> - /* Disable interrupts on each port */
> - for (i = 0x2000; i <= 0x2800; i += 0x0400)
> - writeb(0, addr + i + 4);
> -}
> -
> -/*
> - * Probe for an expansion card.
> - *
> - * If bit 1 of the first byte of the card is set, then the
> - * card does not exist.
> - */
> -static int __init ecard_probe(int slot, unsigned irq, card_type_t type)
> -{
> - ecard_t **ecp;
> - ecard_t *ec;
> - struct ex_ecid cid;
> - void __iomem *addr;
> - int i, rc;
> -
> - ec = ecard_alloc_card(type, slot);
> - if (IS_ERR(ec)) {
> - rc = PTR_ERR(ec);
> - goto nomem;
> - }
> -
> - rc = -ENODEV;
> - if ((addr = __ecard_address(ec, type, ECARD_SYNC)) == NULL)
> - goto nodev;
> -
> - cid.r_zero = 1;
> - ecard_readbytes(&cid, ec, 0, 16, 0);
> - if (cid.r_zero)
> - goto nodev;
> -
> - ec->cid.id = cid.r_id;
> - ec->cid.cd = cid.r_cd;
> - ec->cid.is = cid.r_is;
> - ec->cid.w = cid.r_w;
> - ec->cid.manufacturer = ecard_getu16(cid.r_manu);
> - ec->cid.product = ecard_getu16(cid.r_prod);
> - ec->cid.country = cid.r_country;
> - ec->cid.irqmask = cid.r_irqmask;
> - ec->cid.irqoff = ecard_gets24(cid.r_irqoff);
> - ec->cid.fiqmask = cid.r_fiqmask;
> - ec->cid.fiqoff = ecard_gets24(cid.r_fiqoff);
> - ec->fiqaddr =
> - ec->irqaddr = addr;
> -
> - if (ec->cid.is) {
> - ec->irqmask = ec->cid.irqmask;
> - ec->irqaddr += ec->cid.irqoff;
> - ec->fiqmask = ec->cid.fiqmask;
> - ec->fiqaddr += ec->cid.fiqoff;
> - } else {
> - ec->irqmask = 1;
> - ec->fiqmask = 4;
> - }
> -
> - for (i = 0; i < ARRAY_SIZE(quirklist); i++)
> - if (quirklist[i].manufacturer == ec->cid.manufacturer &&
> - quirklist[i].product == ec->cid.product) {
> - if (quirklist[i].type)
> - ec->card_desc = quirklist[i].type;
> - if (quirklist[i].init)
> - quirklist[i].init(ec);
> - break;
> - }
> -
> - ec->irq = irq;
> -
> - /*
> - * hook the interrupt handlers
> - */
> - if (slot < 8) {
> - irq_set_chip_and_handler(ec->irq, &ecard_chip,
> - handle_level_irq);
> - irq_set_chip_data(ec->irq, ec);
> - irq_clear_status_flags(ec->irq, IRQ_NOREQUEST);
> - }
> -
> -#ifdef CONFIG_ARCH_RPC
> - /* On RiscPC, only first two slots have DMA capability */
> - if (slot < 2)
> - ec->dma = 2 + slot;
> -#endif
> -
> - for (ecp = &cards; *ecp; ecp = &(*ecp)->next);
> -
> - *ecp = ec;
> - slot_to_expcard[slot] = ec;
> -
> - rc = device_register(&ec->dev);
> - if (rc)
> - goto nodev;
> -
> - return 0;
> -
> - nodev:
> - ecard_free_card(ec);
> - nomem:
> - return rc;
> -}
> -
> -/*
> - * Initialise the expansion card system.
> - * Locate all hardware - interrupt management and
> - * actual cards.
> - */
> -static int __init ecard_init(void)
> -{
> - struct task_struct *task;
> - int slot, irqbase;
> -
> - irqbase = irq_alloc_descs(-1, 0, 8, -1);
> - if (irqbase < 0)
> - return irqbase;
> -
> - task = kthread_run(ecard_task, NULL, "kecardd");
> - if (IS_ERR(task)) {
> - printk(KERN_ERR "Ecard: unable to create kernel thread: %ld\n",
> - PTR_ERR(task));
> - irq_free_descs(irqbase, 8);
> - return PTR_ERR(task);
> - }
> -
> - printk("Probing expansion cards\n");
> -
> - for (slot = 0; slot < 8; slot ++) {
> - if (ecard_probe(slot, irqbase + slot, ECARD_EASI) == -ENODEV)
> - ecard_probe(slot, irqbase + slot, ECARD_IOC);
> - }
> -
> - ecard_probe(8, 11, ECARD_IOC);
> -
> - irq_set_chained_handler(IRQ_EXPANSIONCARD, ecard_irq_handler);
> -
> - ecard_proc_init();
> -
> - return 0;
> -}
> -
> -subsys_initcall(ecard_init);
> -
> -/*
> - * ECARD "bus"
> - */
> -static const struct ecard_id *
> -ecard_match_device(const struct ecard_id *ids, struct expansion_card *ec)
> -{
> - int i;
> -
> - for (i = 0; ids[i].manufacturer != 65535; i++)
> - if (ec->cid.manufacturer == ids[i].manufacturer &&
> - ec->cid.product == ids[i].product)
> - return ids + i;
> -
> - return NULL;
> -}
> -
> -static int ecard_drv_probe(struct device *dev)
> -{
> - struct expansion_card *ec = ECARD_DEV(dev);
> - struct ecard_driver *drv = ECARD_DRV(dev->driver);
> - const struct ecard_id *id;
> - int ret;
> -
> - id = ecard_match_device(drv->id_table, ec);
> -
> - ec->claimed = 1;
> - ret = drv->probe(ec, id);
> - if (ret)
> - ec->claimed = 0;
> - return ret;
> -}
> -
> -static void ecard_drv_remove(struct device *dev)
> -{
> - struct expansion_card *ec = ECARD_DEV(dev);
> - struct ecard_driver *drv = ECARD_DRV(dev->driver);
> -
> - drv->remove(ec);
> - ec->claimed = 0;
> -
> - /*
> - * Restore the default operations. We ensure that the
> - * ops are set before we change the data.
> - */
> - ec->ops = &ecard_default_ops;
> - barrier();
> - ec->irq_data = NULL;
> -}
> -
> -/*
> - * Before rebooting, we must make sure that the expansion card is in a
> - * sensible state, so it can be re-detected. This means that the first
> - * page of the ROM must be visible. We call the expansion cards reset
> - * handler, if any.
> - */
> -static void ecard_drv_shutdown(struct device *dev)
> -{
> - struct expansion_card *ec = ECARD_DEV(dev);
> - struct ecard_driver *drv = ECARD_DRV(dev->driver);
> - struct ecard_request req;
> -
> - if (dev->driver) {
> - if (drv->shutdown)
> - drv->shutdown(ec);
> - ec->claimed = 0;
> - }
> -
> - /*
> - * If this card has a loader, call the reset handler.
> - */
> - if (ec->loader) {
> - req.fn = ecard_task_reset;
> - req.ec = ec;
> - ecard_call(&req);
> - }
> -}
> -
> -int ecard_register_driver(struct ecard_driver *drv)
> -{
> - drv->drv.bus = &ecard_bus_type;
> -
> - return driver_register(&drv->drv);
> -}
> -
> -void ecard_remove_driver(struct ecard_driver *drv)
> -{
> - driver_unregister(&drv->drv);
> -}
> -
> -static int ecard_match(struct device *_dev, const struct device_driver *_drv)
> -{
> - struct expansion_card *ec = ECARD_DEV(_dev);
> - struct ecard_driver *drv = ECARD_DRV(_drv);
> - int ret;
> -
> - if (drv->id_table) {
> - ret = ecard_match_device(drv->id_table, ec) != NULL;
> - } else {
> - ret = ec->cid.id == drv->id;
> - }
> -
> - return ret;
> -}
> -
> -const struct bus_type ecard_bus_type = {
> - .name = "ecard",
> - .dev_groups = ecard_dev_groups,
> - .match = ecard_match,
> - .probe = ecard_drv_probe,
> - .remove = ecard_drv_remove,
> - .shutdown = ecard_drv_shutdown,
> -};
> -
> -static int ecard_bus_init(void)
> -{
> - return bus_register(&ecard_bus_type);
> -}
> -
> -postcore_initcall(ecard_bus_init);
> -
> -EXPORT_SYMBOL(ecard_readchunk);
> -EXPORT_SYMBOL(ecard_register_driver);
> -EXPORT_SYMBOL(ecard_remove_driver);
> -EXPORT_SYMBOL(ecard_bus_type);
> diff --git a/arch/arm/mach-rpc/ecard.h b/arch/arm/mach-rpc/ecard.h
> deleted file mode 100644
> index 873dd3d9f274..000000000000
> --- a/arch/arm/mach-rpc/ecard.h
> +++ /dev/null
> @@ -1,66 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * ecard.h
> - *
> - * Copyright 2007 Russell King
> - */
> -
> -/* Definitions internal to ecard.c - for it's use only!!
> - *
> - * External expansion card header as read from the card
> - */
> -struct ex_ecid {
> - unsigned char r_irq:1;
> - unsigned char r_zero:1;
> - unsigned char r_fiq:1;
> - unsigned char r_id:4;
> - unsigned char r_a:1;
> -
> - unsigned char r_cd:1;
> - unsigned char r_is:1;
> - unsigned char r_w:2;
> - unsigned char r_r1:4;
> -
> - unsigned char r_r2:8;
> -
> - unsigned char r_prod[2];
> -
> - unsigned char r_manu[2];
> -
> - unsigned char r_country;
> -
> - unsigned char r_fiqmask;
> - unsigned char r_fiqoff[3];
> -
> - unsigned char r_irqmask;
> - unsigned char r_irqoff[3];
> -};
> -
> -/*
> - * Chunk directory entry as read from the card
> - */
> -struct ex_chunk_dir {
> - unsigned char r_id;
> - unsigned char r_len[3];
> - unsigned long r_start;
> - union {
> - char string[256];
> - char data[1];
> - } d;
> -#define c_id(x) ((x)->r_id)
> -#define c_len(x) ((x)->r_len[0]|((x)->r_len[1]<<8)|((x)->r_len[2]<<16))
> -#define c_start(x) ((x)->r_start)
> -};
> -
> -typedef enum ecard_type { /* Cards address space */
> - ECARD_IOC,
> - ECARD_MEMC,
> - ECARD_EASI
> -} card_type_t;
> -
> -typedef enum { /* Speed for ECARD_IOC space */
> - ECARD_SLOW = 0,
> - ECARD_MEDIUM = 1,
> - ECARD_FAST = 2,
> - ECARD_SYNC = 3
> -} card_speed_t;
> diff --git a/arch/arm/mach-rpc/fiq.S b/arch/arm/mach-rpc/fiq.S
> deleted file mode 100644
> index 087bdf4bc093..000000000000
> --- a/arch/arm/mach-rpc/fiq.S
> +++ /dev/null
> @@ -1,18 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -#include <linux/linkage.h>
> -#include <asm/assembler.h>
> -#include <mach/hardware.h>
> -
> - .equ ioc_base_high, IOC_BASE & 0xff000000
> - .equ ioc_base_low, IOC_BASE & 0x00ff0000
> -
> - .text
> - .global rpc_default_fiq_end
> -ENTRY(rpc_default_fiq_start)
> - mov r12, #ioc_base_high
> - .if ioc_base_low
> - orr r12, r12, #ioc_base_low
> - .endif
> - strb r12, [r12, #0x38] @ Disable FIQ register
> - subs pc, lr, #4
> -rpc_default_fiq_end:
> diff --git a/arch/arm/mach-rpc/floppydma.S b/arch/arm/mach-rpc/floppydma.S
> deleted file mode 100644
> index 6698b83050dc..000000000000
> --- a/arch/arm/mach-rpc/floppydma.S
> +++ /dev/null
> @@ -1,29 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * linux/arch/arm/lib/floppydma.S
> - *
> - * Copyright (C) 1995, 1996 Russell King
> - */
> -#include <linux/linkage.h>
> -#include <asm/assembler.h>
> - .text
> -
> - .global floppy_fiqin_end
> -ENTRY(floppy_fiqin_start)
> - subs r9, r9, #1
> - ldrbgt r12, [r11, #-4]
> - ldrble r12, [r11], #0
> - strb r12, [r10], #1
> - subs pc, lr, #4
> -floppy_fiqin_end:
> -
> - .global floppy_fiqout_end
> -ENTRY(floppy_fiqout_start)
> - subs r9, r9, #1
> - ldrbge r12, [r10], #1
> - movlt r12, #0
> - strble r12, [r11], #0
> - subsle pc, lr, #4
> - strb r12, [r11, #-4]
> - subs pc, lr, #4
> -floppy_fiqout_end:
> diff --git a/arch/arm/mach-rpc/include/mach/acornfb.h b/arch/arm/mach-rpc/include/mach/acornfb.h
> deleted file mode 100644
> index 2bf18ab3d699..000000000000
> --- a/arch/arm/mach-rpc/include/mach/acornfb.h
> +++ /dev/null
> @@ -1,137 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * arch/arm/mach-rpc/include/mach/acornfb.h
> - *
> - * Copyright (C) 1999 Russell King
> - *
> - * AcornFB architecture specific code
> - */
> -
> -#define acornfb_bandwidth(var) ((var)->pixclock * 8 / (var)->bits_per_pixel)
> -
> -static inline int
> -acornfb_valid_pixrate(struct fb_var_screeninfo *var)
> -{
> - u_long limit;
> -
> - if (!var->pixclock)
> - return 0;
> -
> - /*
> - * Limits below are taken from RISC OS bandwidthlimit file
> - */
> - if (current_par.using_vram) {
> - if (current_par.vram_half_sam == 2048)
> - limit = 6578;
> - else
> - limit = 13157;
> - } else {
> - limit = 26315;
> - }
> -
> - return acornfb_bandwidth(var) >= limit;
> -}
> -
> -/*
> - * Try to find the best PLL parameters for the pixel clock.
> - * This algorithm seems to give best predictable results,
> - * and produces the same values as detailed in the VIDC20
> - * data sheet.
> - */
> -static inline u_int
> -acornfb_vidc20_find_pll(u_int pixclk)
> -{
> - u_int r, best_r = 2, best_v = 2;
> - int best_d = 0x7fffffff;
> -
> - for (r = 2; r <= 32; r++) {
> - u_int rr, v, p;
> - int d;
> -
> - rr = 41667 * r;
> -
> - v = (rr + pixclk / 2) / pixclk;
> -
> - if (v > 32 || v < 2)
> - continue;
> -
> - p = (rr + v / 2) / v;
> -
> - d = pixclk - p;
> -
> - if (d < 0)
> - d = -d;
> -
> - if (d < best_d) {
> - best_d = d;
> - best_v = v - 1;
> - best_r = r - 1;
> - }
> -
> - if (d == 0)
> - break;
> - }
> -
> - return best_v << 8 | best_r;
> -}
> -
> -static inline void
> -acornfb_vidc20_find_rates(struct vidc_timing *vidc,
> - struct fb_var_screeninfo *var)
> -{
> - u_int div;
> -
> - /* Select pixel-clock divisor to keep PLL in range */
> - div = var->pixclock / 9090; /*9921*/
> -
> - /* Limit divisor */
> - if (div == 0)
> - div = 1;
> - if (div > 8)
> - div = 8;
> -
> - /* Encode divisor to VIDC20 setting */
> - switch (div) {
> - case 1: vidc->control |= VIDC20_CTRL_PIX_CK; break;
> - case 2: vidc->control |= VIDC20_CTRL_PIX_CK2; break;
> - case 3: vidc->control |= VIDC20_CTRL_PIX_CK3; break;
> - case 4: vidc->control |= VIDC20_CTRL_PIX_CK4; break;
> - case 5: vidc->control |= VIDC20_CTRL_PIX_CK5; break;
> - case 6: vidc->control |= VIDC20_CTRL_PIX_CK6; break;
> - case 7: vidc->control |= VIDC20_CTRL_PIX_CK7; break;
> - case 8: vidc->control |= VIDC20_CTRL_PIX_CK8; break;
> - }
> -
> - /*
> - * With VRAM, the FIFO can be set to the highest possible setting
> - * because there are no latency considerations for other memory
> - * accesses. However, in 64 bit bus mode the FIFO preload value
> - * must not be set to VIDC20_CTRL_FIFO_28 because this will let
> - * the FIFO overflow. See VIDC20 manual page 33 (6.0 Setting the
> - * FIFO preload value).
> - */
> - if (current_par.using_vram) {
> - if (current_par.vram_half_sam == 2048)
> - vidc->control |= VIDC20_CTRL_FIFO_24;
> - else
> - vidc->control |= VIDC20_CTRL_FIFO_28;
> - } else {
> - unsigned long bandwidth = acornfb_bandwidth(var);
> -
> - /* Encode bandwidth as VIDC20 setting */
> - if (bandwidth > 33334) /* < 30.0MB/s */
> - vidc->control |= VIDC20_CTRL_FIFO_16;
> - else if (bandwidth > 26666) /* < 37.5MB/s */
> - vidc->control |= VIDC20_CTRL_FIFO_20;
> - else if (bandwidth > 22222) /* < 45.0MB/s */
> - vidc->control |= VIDC20_CTRL_FIFO_24;
> - else /* > 45.0MB/s */
> - vidc->control |= VIDC20_CTRL_FIFO_28;
> - }
> -
> - /* Find the PLL values */
> - vidc->pll_ctl = acornfb_vidc20_find_pll(var->pixclock / div);
> -}
> -
> -#define acornfb_default_control() (VIDC20_CTRL_PIX_VCLK)
> -#define acornfb_default_econtrol() (VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3))
> diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h
> deleted file mode 100644
> index 6f197706f979..000000000000
> --- a/arch/arm/mach-rpc/include/mach/hardware.h
> +++ /dev/null
> @@ -1,73 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * arch/arm/mach-rpc/include/mach/hardware.h
> - *
> - * Copyright (C) 1996-1999 Russell King.
> - *
> - * This file contains the hardware definitions of the RiscPC series machines.
> - */
> -#ifndef __ASM_ARCH_HARDWARE_H
> -#define __ASM_ARCH_HARDWARE_H
> -
> -#include <mach/memory.h>
> -
> -/*
> - * What hardware must be present
> - */
> -#define HAS_IOMD
> -#define HAS_VIDC20
> -
> -/* Hardware addresses of major areas.
> - * *_START is the physical address
> - * *_SIZE is the size of the region
> - * *_BASE is the virtual address
> - */
> -#define RPC_RAM_SIZE 0x10000000
> -#define RPC_RAM_START 0x10000000
> -
> -#define EASI_SIZE 0x08000000 /* EASI I/O */
> -#define EASI_START 0x08000000
> -#define EASI_BASE IOMEM(0xe5000000)
> -
> -#define IO_START 0x03000000 /* I/O */
> -#define IO_SIZE 0x01000000
> -#define IO_BASE IOMEM(0xe0000000)
> -
> -#define SCREEN_START 0x02000000 /* VRAM */
> -#define SCREEN_END 0xdfc00000
> -#define SCREEN_BASE 0xdf800000
> -
> -#define UNCACHEABLE_ADDR (FLUSH_BASE + 0x10000)
> -
> -/*
> - * IO Addresses
> - */
> -#define ECARD_EASI_BASE (EASI_BASE)
> -#define VIDC_BASE (IO_BASE + 0x00400000)
> -#define EXPMASK_BASE (IO_BASE + 0x00360000)
> -#define ECARD_IOC4_BASE (IO_BASE + 0x00270000)
> -#define ECARD_IOC_BASE (IO_BASE + 0x00240000)
> -#define IOMD_BASE (IO_BASE + 0x00200000)
> -#define IOC_BASE (IO_BASE + 0x00200000)
> -#define ECARD_MEMC8_BASE (IO_BASE + 0x0002b000)
> -#define FLOPPYDMA_BASE (IO_BASE + 0x0002a000)
> -#define PCIO_BASE (IO_BASE + 0x00010000)
> -#define ECARD_MEMC_BASE (IO_BASE + 0x00000000)
> -
> -#define vidc_writel(val) __raw_writel(val, VIDC_BASE)
> -
> -#define NETSLOT_BASE 0x0302b000
> -#define NETSLOT_SIZE 0x00001000
> -
> -#define PODSLOT_IOC0_BASE 0x03240000
> -#define PODSLOT_IOC4_BASE 0x03270000
> -#define PODSLOT_IOC_SIZE (1 << 14)
> -#define PODSLOT_MEMC_BASE 0x03000000
> -#define PODSLOT_MEMC_SIZE (1 << 14)
> -#define PODSLOT_EASI_BASE 0x08000000
> -#define PODSLOT_EASI_SIZE (1 << 24)
> -
> -#define EXPMASK_STATUS (EXPMASK_BASE + 0x00)
> -#define EXPMASK_ENABLE (EXPMASK_BASE + 0x04)
> -
> -#endif
> diff --git a/arch/arm/mach-rpc/include/mach/io.h b/arch/arm/mach-rpc/include/mach/io.h
> deleted file mode 100644
> index 8a8f28406691..000000000000
> --- a/arch/arm/mach-rpc/include/mach/io.h
> +++ /dev/null
> @@ -1,28 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * arch/arm/mach-rpc/include/mach/io.h
> - *
> - * Copyright (C) 1997 Russell King
> - *
> - * Modifications:
> - * 06-Dec-1997 RMK Created.
> - */
> -#ifndef __ASM_ARM_ARCH_IO_H
> -#define __ASM_ARM_ARCH_IO_H
> -
> -#include <mach/hardware.h>
> -
> -#define IO_SPACE_LIMIT 0xffff
> -
> -/*
> - * We need PC style IO addressing for:
> - * - floppy (at 0x3f2,0x3f4,0x3f5,0x3f7)
> - * - parport (at 0x278-0x27a, 0x27b-0x27f, 0x778-0x77a)
> - * - 8250 serial (only for compile)
> - *
> - * These peripherals are found in an area of MMIO which looks very much
> - * like an ISA bus, but with registers at the low byte of each word.
> - */
> -#define __io(a) (PCIO_BASE + ((a) << 2))
> -
> -#endif
> diff --git a/arch/arm/mach-rpc/include/mach/irqs.h b/arch/arm/mach-rpc/include/mach/irqs.h
> deleted file mode 100644
> index 0c3428fd9729..000000000000
> --- a/arch/arm/mach-rpc/include/mach/irqs.h
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * arch/arm/mach-rpc/include/mach/irqs.h
> - *
> - * Copyright (C) 1996 Russell King
> - */
> -
> -#define IRQ_PRINTER 0
> -#define IRQ_BATLOW 1
> -#define IRQ_FLOPPYINDEX 2
> -#define IRQ_VSYNCPULSE 3
> -#define IRQ_POWERON 4
> -#define IRQ_TIMER0 5
> -#define IRQ_TIMER1 6
> -#define IRQ_IMMEDIATE 7
> -#define IRQ_EXPCARDFIQ 8
> -#define IRQ_HARDDISK 9
> -#define IRQ_SERIALPORT 10
> -#define IRQ_FLOPPYDISK 12
> -#define IRQ_EXPANSIONCARD 13
> -#define IRQ_KEYBOARDTX 14
> -#define IRQ_KEYBOARDRX 15
> -
> -#define IRQ_DMA0 16
> -#define IRQ_DMA1 17
> -#define IRQ_DMA2 18
> -#define IRQ_DMA3 19
> -#define IRQ_DMAS0 20
> -#define IRQ_DMAS1 21
> -
> -#define FIQ_FLOPPYDATA 0
> -#define FIQ_ECONET 2
> -#define FIQ_SERIALPORT 4
> -#define FIQ_EXPANSIONCARD 6
> -#define FIQ_FORCE 7
> -
> -/*
> - * This is the offset of the FIQ "IRQ" numbers
> - */
> -#define FIQ_START 64
> -
> -#define NR_IRQS 128
> diff --git a/arch/arm/mach-rpc/include/mach/isa-dma.h b/arch/arm/mach-rpc/include/mach/isa-dma.h
> deleted file mode 100644
> index d9c3af1ef718..000000000000
> --- a/arch/arm/mach-rpc/include/mach/isa-dma.h
> +++ /dev/null
> @@ -1,26 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * arch/arm/mach-rpc/include/mach/isa-dma.h
> - *
> - * Copyright (C) 1997 Russell King
> - */
> -#ifndef __ASM_ARCH_DMA_H
> -#define __ASM_ARCH_DMA_H
> -
> -#define MAX_DMA_CHANNELS 8
> -
> -#define DMA_0 0
> -#define DMA_1 1
> -#define DMA_2 2
> -#define DMA_3 3
> -#define DMA_S0 4
> -#define DMA_S1 5
> -#define DMA_VIRTUAL_FLOPPY 6
> -#define DMA_VIRTUAL_SOUND 7
> -
> -#define DMA_FLOPPY DMA_VIRTUAL_FLOPPY
> -
> -#define IOMD_DMA_BOUNDARY (PAGE_SIZE - 1)
> -
> -#endif /* _ASM_ARCH_DMA_H */
> -
> diff --git a/arch/arm/mach-rpc/include/mach/memory.h b/arch/arm/mach-rpc/include/mach/memory.h
> deleted file mode 100644
> index a586eb31b18d..000000000000
> --- a/arch/arm/mach-rpc/include/mach/memory.h
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * arch/arm/mach-rpc/include/mach/memory.h
> - *
> - * Copyright (C) 1996,1997,1998 Russell King.
> - *
> - * Changelog:
> - * 20-Oct-1996 RMK Created
> - * 31-Dec-1997 RMK Fixed definitions to reduce warnings
> - * 11-Jan-1998 RMK Uninlined to reduce hits on cache
> - * 08-Feb-1998 RMK Added __virt_to_bus and __bus_to_virt
> - * 21-Mar-1999 RMK Renamed to memory.h
> - * RMK Added TASK_SIZE and PAGE_OFFSET
> - */
> -#ifndef __ASM_ARCH_MEMORY_H
> -#define __ASM_ARCH_MEMORY_H
> -
> -/*
> - * Cache flushing area - ROM
> - */
> -#define FLUSH_BASE_PHYS 0x00000000
> -#define FLUSH_BASE 0xdf000000
> -
> -/*
> - * Sparsemem support. Each section is a maximum of 64MB. The sections
> - * are offset by 128MB and can cover 128MB, so that gives us a maximum
> - * of 29 physmem bits.
> - */
> -#define MAX_PHYSMEM_BITS 29
> -#define SECTION_SIZE_BITS 26
> -
> -#endif
> diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
> deleted file mode 100644
> index 1fbe7eb956fd..000000000000
> --- a/arch/arm/mach-rpc/include/mach/uncompress.h
> +++ /dev/null
> @@ -1,181 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * arch/arm/mach-rpc/include/mach/uncompress.h
> - *
> - * Copyright (C) 1996 Russell King
> - */
> -#define VIDMEM ((char *)SCREEN_START)
> -
> -#include <linux/io.h>
> -#include <mach/hardware.h>
> -#include <asm/setup.h>
> -#include <asm/page.h>
> -
> -int video_size_row;
> -unsigned char bytes_per_char_h;
> -extern unsigned long con_charconvtable[256];
> -
> -struct param_struct {
> - unsigned long page_size;
> - unsigned long nr_pages;
> - unsigned long ramdisk_size;
> - unsigned long mountrootrdonly;
> - unsigned long rootdev;
> - unsigned long video_num_cols;
> - unsigned long video_num_rows;
> - unsigned long video_x;
> - unsigned long video_y;
> - unsigned long memc_control_reg;
> - unsigned char sounddefault;
> - unsigned char adfsdrives;
> - unsigned char bytes_per_char_h;
> - unsigned char bytes_per_char_v;
> - unsigned long unused[256/4-11];
> -};
> -
> -static const unsigned long palette_4[16] = {
> - 0x00000000,
> - 0x000000cc,
> - 0x0000cc00, /* Green */
> - 0x0000cccc, /* Yellow */
> - 0x00cc0000, /* Blue */
> - 0x00cc00cc, /* Magenta */
> - 0x00cccc00, /* Cyan */
> - 0x00cccccc, /* White */
> - 0x00000000,
> - 0x000000ff,
> - 0x0000ff00,
> - 0x0000ffff,
> - 0x00ff0000,
> - 0x00ff00ff,
> - 0x00ffff00,
> - 0x00ffffff
> -};
> -
> -#define palette_setpixel(p) *(unsigned long *)(IO_START+0x00400000) = 0x10000000|((p) & 255)
> -#define palette_write(v) *(unsigned long *)(IO_START+0x00400000) = 0x00000000|((v) & 0x00ffffff)
> -
> -/*
> - * params_phys is a linker defined symbol - see
> - * arch/arm/boot/compressed/Makefile
> - */
> -extern __attribute__((pure)) struct param_struct *params(void);
> -#define params (params())
> -
> -#ifndef STANDALONE_DEBUG
> -unsigned long video_num_cols;
> -unsigned long video_num_rows;
> -unsigned long video_x;
> -unsigned long video_y;
> -unsigned char bytes_per_char_v;
> -int white;
> -
> -/*
> - * This does not append a newline
> - */
> -static inline void putc(int c)
> -{
> - extern void ll_write_char(char *, char c, char white);
> - int x,y;
> - char *ptr;
> -
> - x = video_x;
> - y = video_y;
> -
> - if (c == '\n') {
> - if (++y >= video_num_rows)
> - y--;
> - } else if (c == '\r') {
> - x = 0;
> - } else {
> - ptr = VIDMEM + ((y*video_num_cols*bytes_per_char_v+x)*bytes_per_char_h);
> - ll_write_char(ptr, c, white);
> - if (++x >= video_num_cols) {
> - x = 0;
> - if ( ++y >= video_num_rows ) {
> - y--;
> - }
> - }
> - }
> -
> - video_x = x;
> - video_y = y;
> -}
> -
> -static inline void flush(void)
> -{
> -}
> -
> -/*
> - * Setup for decompression
> - */
> -static void arch_decomp_setup(void)
> -{
> - int i;
> - struct tag *t = (struct tag *)params;
> - unsigned int nr_pages = 0, page_size = PAGE_SIZE;
> -
> - if (t->hdr.tag == ATAG_CORE) {
> - for (; t->hdr.size; t = tag_next(t)) {
> - if (t->hdr.tag == ATAG_VIDEOTEXT) {
> - video_num_rows = t->u.videotext.video_lines;
> - video_num_cols = t->u.videotext.video_cols;
> - video_x = t->u.videotext.x;
> - video_y = t->u.videotext.y;
> - } else if (t->hdr.tag == ATAG_VIDEOLFB) {
> - bytes_per_char_h = t->u.videolfb.lfb_depth;
> - bytes_per_char_v = 8;
> - } else if (t->hdr.tag == ATAG_MEM) {
> - page_size = PAGE_SIZE;
> - nr_pages += (t->u.mem.size / PAGE_SIZE);
> - }
> - }
> - } else {
> - nr_pages = params->nr_pages;
> - page_size = params->page_size;
> - video_num_rows = params->video_num_rows;
> - video_num_cols = params->video_num_cols;
> - video_x = params->video_x;
> - video_y = params->video_y;
> - bytes_per_char_h = params->bytes_per_char_h;
> - bytes_per_char_v = params->bytes_per_char_v;
> - }
> -
> - video_size_row = video_num_cols * bytes_per_char_h;
> -
> - if (bytes_per_char_h == 4)
> - for (i = 0; i < 256; i++)
> - con_charconvtable[i] =
> - (i & 128 ? 1 << 0 : 0) |
> - (i & 64 ? 1 << 4 : 0) |
> - (i & 32 ? 1 << 8 : 0) |
> - (i & 16 ? 1 << 12 : 0) |
> - (i & 8 ? 1 << 16 : 0) |
> - (i & 4 ? 1 << 20 : 0) |
> - (i & 2 ? 1 << 24 : 0) |
> - (i & 1 ? 1 << 28 : 0);
> - else
> - for (i = 0; i < 16; i++)
> - con_charconvtable[i] =
> - (i & 8 ? 1 << 0 : 0) |
> - (i & 4 ? 1 << 8 : 0) |
> - (i & 2 ? 1 << 16 : 0) |
> - (i & 1 ? 1 << 24 : 0);
> -
> -
> - palette_setpixel(0);
> - if (bytes_per_char_h == 1) {
> - palette_write (0);
> - palette_write (0x00ffffff);
> - for (i = 2; i < 256; i++)
> - palette_write (0);
> - white = 1;
> - } else {
> - for (i = 0; i < 256; i++)
> - palette_write (i < 16 ? palette_4[i] : 0);
> - white = 7;
> - }
> -
> - if (nr_pages * page_size < 4096*1024) error("<4M of mem\n");
> -}
> -#endif
> diff --git a/arch/arm/mach-rpc/io-acorn.S b/arch/arm/mach-rpc/io-acorn.S
> deleted file mode 100644
> index aa9bf0d771c0..000000000000
> --- a/arch/arm/mach-rpc/io-acorn.S
> +++ /dev/null
> @@ -1,28 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * linux/arch/arm/lib/io-acorn.S
> - *
> - * Copyright (C) 1995, 1996 Russell King
> - *
> - * 27/03/03 Ian Molton Clean up CONFIG_CPU
> - */
> -#include <linux/linkage.h>
> -#include <linux/kern_levels.h>
> -#include <asm/assembler.h>
> -
> - .text
> - .align
> -
> -.Liosl_warning:
> - .ascii KERN_WARNING "insl/outsl not implemented, called from %08lX\0"
> - .align
> -
> -/*
> - * These make no sense on Acorn machines.
> - * Print a warning message.
> - */
> -ENTRY(insl)
> -ENTRY(outsl)
> - adr r0, .Liosl_warning
> - mov r1, lr
> - b _printk
> diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
> deleted file mode 100644
> index dc29384b6ef8..000000000000
> --- a/arch/arm/mach-rpc/irq.c
> +++ /dev/null
> @@ -1,226 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -#include <linux/init.h>
> -#include <linux/list.h>
> -#include <linux/io.h>
> -
> -#include <asm/mach/irq.h>
> -#include <asm/hardware/iomd.h>
> -#include <asm/irq.h>
> -#include <asm/fiq.h>
> -
> -// These are offsets from the stat register for each IRQ bank
> -#define STAT 0x00
> -#define REQ 0x04
> -#define CLR 0x04
> -#define MASK 0x08
> -
> -static const u8 irq_prio_h[256] = {
> - 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10,
> - 12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10,
> - 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
> - 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
> - 14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10,
> - 14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10,
> - 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
> - 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
> - 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10,
> - 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10,
> - 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
> - 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
> - 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10,
> - 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10,
> - 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
> - 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
> -};
> -
> -static const u8 irq_prio_d[256] = {
> - 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
> - 20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
> - 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
> - 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
> - 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
> - 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
> - 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
> - 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
> - 23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
> - 23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
> - 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
> - 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
> - 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
> - 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
> - 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
> - 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
> -};
> -
> -static const u8 irq_prio_l[256] = {
> - 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3,
> - 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3,
> - 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
> - 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
> - 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3,
> - 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3,
> - 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
> - 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
> - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
> - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
> - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
> - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
> - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
> - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
> - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
> - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
> -};
> -
> -static int iomd_get_irq_nr(void)
> -{
> - int irq;
> - u8 reg;
> -
> - /* get highest priority first */
> - reg = readb(IOC_BASE + IOMD_IRQREQB);
> - irq = irq_prio_h[reg];
> - if (irq)
> - return irq;
> -
> - /* get DMA */
> - reg = readb(IOC_BASE + IOMD_DMAREQ);
> - irq = irq_prio_d[reg];
> - if (irq)
> - return irq;
> -
> - /* get low priority */
> - reg = readb(IOC_BASE + IOMD_IRQREQA);
> - irq = irq_prio_l[reg];
> - if (irq)
> - return irq;
> - return 0;
> -}
> -
> -static void iomd_handle_irq(struct pt_regs *regs)
> -{
> - int irq;
> -
> - do {
> - irq = iomd_get_irq_nr();
> - if (irq)
> - generic_handle_irq(irq);
> - } while (irq);
> -}
> -
> -static void __iomem *iomd_get_base(struct irq_data *d)
> -{
> - void *cd = irq_data_get_irq_chip_data(d);
> -
> - return (void __iomem *)(unsigned long)cd;
> -}
> -
> -static void iomd_set_base_mask(unsigned int irq, void __iomem *base, u32 mask)
> -{
> - struct irq_data *d = irq_get_irq_data(irq);
> -
> - d->mask = mask;
> - irq_set_chip_data(irq, (void *)(unsigned long)base);
> -}
> -
> -static void iomd_irq_mask_ack(struct irq_data *d)
> -{
> - void __iomem *base = iomd_get_base(d);
> - unsigned int val, mask = d->mask;
> -
> - val = readb(base + MASK);
> - writeb(val & ~mask, base + MASK);
> - writeb(mask, base + CLR);
> -}
> -
> -static void iomd_irq_mask(struct irq_data *d)
> -{
> - void __iomem *base = iomd_get_base(d);
> - unsigned int val, mask = d->mask;
> -
> - val = readb(base + MASK);
> - writeb(val & ~mask, base + MASK);
> -}
> -
> -static void iomd_irq_unmask(struct irq_data *d)
> -{
> - void __iomem *base = iomd_get_base(d);
> - unsigned int val, mask = d->mask;
> -
> - val = readb(base + MASK);
> - writeb(val | mask, base + MASK);
> -}
> -
> -static struct irq_chip iomd_chip_clr = {
> - .irq_mask_ack = iomd_irq_mask_ack,
> - .irq_mask = iomd_irq_mask,
> - .irq_unmask = iomd_irq_unmask,
> -};
> -
> -static struct irq_chip iomd_chip_noclr = {
> - .irq_mask = iomd_irq_mask,
> - .irq_unmask = iomd_irq_unmask,
> -};
> -
> -extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end;
> -
> -void __init rpc_init_irq(void)
> -{
> - unsigned int irq, clr, set;
> -
> - iomd_writeb(0, IOMD_IRQMASKA);
> - iomd_writeb(0, IOMD_IRQMASKB);
> - iomd_writeb(0, IOMD_FIQMASK);
> - iomd_writeb(0, IOMD_DMAMASK);
> -
> - set_fiq_handler(&rpc_default_fiq_start,
> - &rpc_default_fiq_end - &rpc_default_fiq_start);
> -
> - set_handle_irq(iomd_handle_irq);
> -
> - for (irq = 0; irq < NR_IRQS; irq++) {
> - clr = IRQ_NOREQUEST;
> - set = 0;
> -
> - if (irq <= 6 || (irq >= 9 && irq <= 15))
> - clr |= IRQ_NOPROBE;
> -
> - if (irq == 21 || (irq >= 16 && irq <= 19) ||
> - irq == IRQ_KEYBOARDTX)
> - set |= IRQ_NOAUTOEN;
> -
> - switch (irq) {
> - case 0 ... 7:
> - irq_set_chip_and_handler(irq, &iomd_chip_clr,
> - handle_level_irq);
> - irq_modify_status(irq, clr, set);
> - iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATA,
> - BIT(irq));
> - break;
> -
> - case 8 ... 15:
> - irq_set_chip_and_handler(irq, &iomd_chip_noclr,
> - handle_level_irq);
> - irq_modify_status(irq, clr, set);
> - iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATB,
> - BIT(irq - 8));
> - break;
> -
> - case 16 ... 21:
> - irq_set_chip_and_handler(irq, &iomd_chip_noclr,
> - handle_level_irq);
> - irq_modify_status(irq, clr, set);
> - iomd_set_base_mask(irq, IOMD_BASE + IOMD_DMASTAT,
> - BIT(irq - 16));
> - break;
> -
> - case 64 ... 71:
> - irq_set_chip(irq, &iomd_chip_noclr);
> - irq_modify_status(irq, clr, set);
> - iomd_set_base_mask(irq, IOMD_BASE + IOMD_FIQSTAT,
> - BIT(irq - 64));
> - break;
> - }
> - }
> -
> - init_FIQ(FIQ_START);
> -}
> diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
> deleted file mode 100644
> index f70fb9c4b0cb..000000000000
> --- a/arch/arm/mach-rpc/riscpc.c
> +++ /dev/null
> @@ -1,225 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * linux/arch/arm/mach-rpc/riscpc.c
> - *
> - * Copyright (C) 1998-2001 Russell King
> - *
> - * Architecture specific fixups.
> - */
> -#include <linux/kernel.h>
> -#include <linux/tty.h>
> -#include <linux/delay.h>
> -#include <linux/pm.h>
> -#include <linux/init.h>
> -#include <linux/sched.h>
> -#include <linux/device.h>
> -#include <linux/serial_8250.h>
> -#include <linux/ata_platform.h>
> -#include <linux/io.h>
> -#include <linux/i2c.h>
> -#include <linux/reboot.h>
> -
> -#include <asm/elf.h>
> -#include <asm/mach-types.h>
> -#include <mach/hardware.h>
> -#include <asm/hardware/iomd.h>
> -#include <asm/page.h>
> -#include <asm/domain.h>
> -#include <asm/setup.h>
> -#include <asm/system_misc.h>
> -
> -#include <asm/mach/map.h>
> -#include <asm/mach/arch.h>
> -#include <asm/mach/time.h>
> -
> -extern void rpc_init_irq(void);
> -
> -unsigned int vram_size;
> -unsigned int memc_ctrl_reg;
> -unsigned int number_mfm_drives;
> -
> -static int __init parse_tag_acorn(const struct tag *tag)
> -{
> - memc_ctrl_reg = tag->u.acorn.memc_control_reg;
> - number_mfm_drives = tag->u.acorn.adfsdrives;
> -
> - switch (tag->u.acorn.vram_pages) {
> - case 512:
> - vram_size += PAGE_SIZE * 256;
> - fallthrough; /* ??? */
> - case 256:
> - vram_size += PAGE_SIZE * 256;
> - break;
> - default:
> - break;
> - }
> -#if 0
> - if (vram_size) {
> - desc->video_start = 0x02000000;
> - desc->video_end = 0x02000000 + vram_size;
> - }
> -#endif
> - return 0;
> -}
> -
> -__tagtable(ATAG_ACORN, parse_tag_acorn);
> -
> -static struct map_desc rpc_io_desc[] __initdata = {
> - { /* VRAM */
> - .virtual = SCREEN_BASE,
> - .pfn = __phys_to_pfn(SCREEN_START),
> - .length = 2*1048576,
> - .type = MT_DEVICE
> - }, { /* IO space */
> - .virtual = (u32)IO_BASE,
> - .pfn = __phys_to_pfn(IO_START),
> - .length = IO_SIZE ,
> - .type = MT_DEVICE
> - }, { /* EASI space */
> - .virtual = (unsigned long)EASI_BASE,
> - .pfn = __phys_to_pfn(EASI_START),
> - .length = EASI_SIZE,
> - .type = MT_DEVICE
> - }
> -};
> -
> -static void __init rpc_map_io(void)
> -{
> - iotable_init(rpc_io_desc, ARRAY_SIZE(rpc_io_desc));
> -
> - /*
> - * Turn off floppy.
> - */
> - writeb(0xc, PCIO_BASE + (0x3f2 << 2));
> -
> - /*
> - * RiscPC can't handle half-word loads and stores
> - */
> - elf_hwcap &= ~HWCAP_HALF;
> -}
> -
> -static struct resource acornfb_resources[] = {
> - /* VIDC */
> - DEFINE_RES_MEM(0x03400000, 0x00200000),
> - DEFINE_RES_IRQ(IRQ_VSYNCPULSE),
> -};
> -
> -static struct platform_device acornfb_device = {
> - .name = "acornfb",
> - .id = -1,
> - .dev = {
> - .coherent_dma_mask = 0xffffffff,
> - },
> - .num_resources = ARRAY_SIZE(acornfb_resources),
> - .resource = acornfb_resources,
> -};
> -
> -static struct resource iomd_resources[] = {
> - DEFINE_RES_MEM(0x03200000, 0x10000),
> -};
> -
> -static struct platform_device iomd_device = {
> - .name = "iomd",
> - .id = -1,
> - .num_resources = ARRAY_SIZE(iomd_resources),
> - .resource = iomd_resources,
> -};
> -
> -static struct resource iomd_kart_resources[] = {
> - DEFINE_RES_IRQ(IRQ_KEYBOARDRX),
> - DEFINE_RES_IRQ(IRQ_KEYBOARDTX),
> -};
> -
> -static struct platform_device kbd_device = {
> - .name = "kart",
> - .id = -1,
> - .dev = {
> - .parent = &iomd_device.dev,
> - },
> - .num_resources = ARRAY_SIZE(iomd_kart_resources),
> - .resource = iomd_kart_resources,
> -};
> -
> -static struct plat_serial8250_port serial_platform_data[] = {
> - {
> - .mapbase = 0x03010fe0,
> - .irq = IRQ_SERIALPORT,
> - .uartclk = 1843200,
> - .regshift = 2,
> - .iotype = UPIO_MEM,
> - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SKIP_TEST,
> - },
> - { },
> -};
> -
> -static struct platform_device serial_device = {
> - .name = "serial8250",
> - .id = PLAT8250_DEV_PLATFORM,
> - .dev = {
> - .platform_data = serial_platform_data,
> - },
> -};
> -
> -static struct pata_platform_info pata_platform_data = {
> - .ioport_shift = 2,
> -};
> -
> -static struct resource pata_resources[] = {
> - DEFINE_RES_MEM(0x030107c0, 0x20),
> - DEFINE_RES_MEM(0x03010fd8, 0x04),
> - DEFINE_RES_IRQ(IRQ_HARDDISK),
> -};
> -
> -static struct platform_device pata_device = {
> - .name = "pata_platform",
> - .id = -1,
> - .num_resources = ARRAY_SIZE(pata_resources),
> - .resource = pata_resources,
> - .dev = {
> - .platform_data = &pata_platform_data,
> - .coherent_dma_mask = ~0, /* grumble */
> - },
> -};
> -
> -static struct platform_device *devs[] __initdata = {
> - &iomd_device,
> - &kbd_device,
> - &serial_device,
> - &acornfb_device,
> - &pata_device,
> -};
> -
> -static struct i2c_board_info i2c_rtc = {
> - I2C_BOARD_INFO("pcf8583", 0x50)
> -};
> -
> -static int __init rpc_init(void)
> -{
> - i2c_register_board_info(0, &i2c_rtc, 1);
> - return platform_add_devices(devs, ARRAY_SIZE(devs));
> -}
> -
> -arch_initcall(rpc_init);
> -
> -static void rpc_restart(enum reboot_mode mode, const char *cmd)
> -{
> - iomd_writeb(0, IOMD_ROMCR0);
> -
> - /*
> - * Jump into the ROM
> - */
> - soft_restart(0);
> -}
> -
> -void ioc_timer_init(void);
> -
> -MACHINE_START(RISCPC, "Acorn-RiscPC")
> - /* Maintainer: Russell King */
> - .atag_offset = 0x100,
> - .reserve_lp0 = 1,
> - .reserve_lp1 = 1,
> - .map_io = rpc_map_io,
> - .init_irq = rpc_init_irq,
> - .init_time = ioc_timer_init,
> - .restart = rpc_restart,
> -MACHINE_END
> diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c
> deleted file mode 100644
> index 9f8edcfe9357..000000000000
> --- a/arch/arm/mach-rpc/time.c
> +++ /dev/null
> @@ -1,97 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * linux/arch/arm/common/time-acorn.c
> - *
> - * Copyright (c) 1996-2000 Russell King.
> - *
> - * Changelog:
> - * 24-Sep-1996 RMK Created
> - * 10-Oct-1996 RMK Brought up to date with arch-sa110eval
> - * 04-Dec-1997 RMK Updated for new arch/arm/time.c
> - * 13=Jun-2004 DS Moved to arch/arm/common b/c shared w/CLPS7500
> - */
> -#include <linux/clocksource.h>
> -#include <linux/init.h>
> -#include <linux/interrupt.h>
> -#include <linux/irq.h>
> -#include <linux/io.h>
> -
> -#include <mach/hardware.h>
> -#include <asm/hardware/ioc.h>
> -
> -#include <asm/mach/time.h>
> -
> -#define RPC_CLOCK_FREQ 2000000
> -#define RPC_LATCH DIV_ROUND_CLOSEST(RPC_CLOCK_FREQ, HZ)
> -
> -static u32 ioc_time;
> -
> -static u64 ioc_timer_read(struct clocksource *cs)
> -{
> - unsigned int count1, count2, status;
> - unsigned long flags;
> - u32 ticks;
> -
> - local_irq_save(flags);
> - ioc_writeb (0, IOC_T0LATCH);
> - barrier ();
> - count1 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
> - barrier ();
> - status = ioc_readb(IOC_IRQREQA);
> - barrier ();
> - ioc_writeb (0, IOC_T0LATCH);
> - barrier ();
> - count2 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
> - ticks = ioc_time + RPC_LATCH - count2;
> - local_irq_restore(flags);
> -
> - if (count2 < count1) {
> - /*
> - * The timer has not reloaded between reading count1 and
> - * count2, check whether an interrupt was actually pending.
> - */
> - if (status & (1 << 5))
> - ticks += RPC_LATCH;
> - } else if (count2 > count1) {
> - /*
> - * The timer has reloaded, so count2 indicates the new
> - * count since the wrap. The interrupt would not have
> - * been processed, so add the missed ticks.
> - */
> - ticks += RPC_LATCH;
> - }
> -
> - return ticks;
> -}
> -
> -static struct clocksource ioctime_clocksource = {
> - .read = ioc_timer_read,
> - .mask = CLOCKSOURCE_MASK(32),
> - .rating = 100,
> -};
> -
> -void __init ioctime_init(void)
> -{
> - ioc_writeb(RPC_LATCH & 255, IOC_T0LTCHL);
> - ioc_writeb(RPC_LATCH >> 8, IOC_T0LTCHH);
> - ioc_writeb(0, IOC_T0GO);
> -}
> -
> -static irqreturn_t
> -ioc_timer_interrupt(int irq, void *dev_id)
> -{
> - ioc_time += RPC_LATCH;
> - legacy_timer_tick(1);
> - return IRQ_HANDLED;
> -}
> -
> -/*
> - * Set up timer interrupt.
> - */
> -void __init ioc_timer_init(void)
> -{
> - WARN_ON(clocksource_register_hz(&ioctime_clocksource, RPC_CLOCK_FREQ));
> - ioctime_init();
> - if (request_irq(IRQ_TIMER0, ioc_timer_interrupt, 0, "timer", NULL))
> - pr_err("Failed to request irq %d (timer)\n", IRQ_TIMER0);
> -}
> diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
> index 350f6dcc24cc..07c2fda4d422 100644
> --- a/arch/arm/mm/mmu.c
> +++ b/arch/arm/mm/mmu.c
> @@ -1112,7 +1112,7 @@ static void __init fill_pmd_gaps(void)
> #define fill_pmd_gaps() do { } while (0)
> #endif
>
> -#if defined(CONFIG_PCI) && !defined(CONFIG_NEED_MACH_IO_H)
> +#if defined(CONFIG_PCI)
> static void __init pci_reserve_io(void)
> {
> struct static_vm *svm;
> diff --git a/block/partitions/Kconfig b/block/partitions/Kconfig
> index ce17e41451af..94e7df547e7a 100644
> --- a/block/partitions/Kconfig
> +++ b/block/partitions/Kconfig
> @@ -19,13 +19,11 @@ config PARTITION_ADVANCED
>
> config ACORN_PARTITION
> bool "Acorn partition support" if PARTITION_ADVANCED
> - default y if ARCH_ACORN
> help
> Support hard disks partitioned under Acorn operating systems.
>
> config ACORN_PARTITION_CUMANA
> bool "Cumana partition support" if PARTITION_ADVANCED
> - default y if ARCH_ACORN
> depends on ACORN_PARTITION
> help
> Say Y here if you would like to use hard disks under Linux which
> @@ -33,12 +31,10 @@ config ACORN_PARTITION_CUMANA
>
> config ACORN_PARTITION_EESOX
> bool "EESOX partition support" if PARTITION_ADVANCED
> - default y if ARCH_ACORN
> depends on ACORN_PARTITION
>
> config ACORN_PARTITION_ICS
> bool "ICS partition support" if PARTITION_ADVANCED
> - default y if ARCH_ACORN
> depends on ACORN_PARTITION
> help
> Say Y here if you would like to use hard disks under Linux which
> @@ -46,7 +42,6 @@ config ACORN_PARTITION_ICS
>
> config ACORN_PARTITION_ADFS
> bool "Native filecore partition support" if PARTITION_ADVANCED
> - default y if ARCH_ACORN
> depends on ACORN_PARTITION
> help
> The Acorn Disc Filing System is the standard file system of the
> @@ -56,7 +51,6 @@ config ACORN_PARTITION_ADFS
>
> config ACORN_PARTITION_POWERTEC
> bool "PowerTec partition support" if PARTITION_ADVANCED
> - default y if ARCH_ACORN
> depends on ACORN_PARTITION
> help
> Support reading partition tables created on Acorn machines using
> @@ -64,7 +58,6 @@ config ACORN_PARTITION_POWERTEC
>
> config ACORN_PARTITION_RISCIX
> bool "RISCiX partition support" if PARTITION_ADVANCED
> - default y if ARCH_ACORN
> depends on ACORN_PARTITION
> help
> Once upon a time, there was a native Unix port for the Acorn series
> diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
> index c41d850b29c6..9770c83aea74 100644
> --- a/drivers/tty/vt/keyboard.c
> +++ b/drivers/tty/vt/keyboard.c
> @@ -1308,7 +1308,7 @@ static void kbd_bh(struct tasklet_struct *unused)
> #if defined(CONFIG_X86) || defined(CONFIG_ALPHA) ||\
> defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\
> defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
> - (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC))
> + (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD))
>
> static inline bool kbd_is_hw_raw(const struct input_dev *dev)
> {
> diff --git a/lib/fonts/font_acorn_8x8.c b/lib/fonts/font_acorn_8x8.c
> index 4ff52c79f8c4..ec2b1e463ab9 100644
> --- a/lib/fonts/font_acorn_8x8.c
> +++ b/lib/fonts/font_acorn_8x8.c
> @@ -277,9 +277,5 @@ const struct font_desc font_acorn_8x8 = {
> .height = 8,
> .charcount = 256,
> .data = acorndata_8x8.data,
> -#ifdef CONFIG_ARCH_ACORN
> - .pref = 20,
> -#else
> .pref = 0,
> -#endif
> };
--
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstr. 146, 90461 Nürnberg, Germany, www.suse.com
GF: Jochen Jaser, Andrew McDonald, (HRB 36809, AG Nürnberg)
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 06/13] ARM: omap2: remove omap24xx support
2026-09-08 15:27 ` [PATCH 06/13] ARM: omap2: remove omap24xx support Arnd Bergmann
` (2 preceding siblings ...)
2026-09-08 19:21 ` Karl Mehltretter
@ 2026-09-09 8:06 ` Thomas Zimmermann
3 siblings, 0 replies; 20+ messages in thread
From: Thomas Zimmermann @ 2026-09-09 8:06 UTC (permalink / raw)
To: Arnd Bergmann, Krzysztof Kozlowski, Alexandre Belloni,
Linus Walleij, Russell King
Cc: Drew Fustini, Arnd Bergmann, Rob Herring, Conor Dooley,
Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Vladimir Zapolskiy, Stefan Agner, Maxime Coquelin,
Alexandre Torgue, Aaro Koskinen, Andreas Kemnade, Kevin Hilman,
Roger Quadros, Tony Lindgren, Nicolas Ferre, Claudiu Beznea,
Andrew Lunn, Sebastian Hesselbarth, Gregory Clement,
Robert Jarzmik, Kristoffer Ericson, Ethan Nelson-Moore,
Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo,
Karl Mehltretter, David Hildenbrand (Arm), Nicolas Pitre,
linux-doc, linux-kernel, linux-arm-kernel, devicetree, imx,
linux-stm32, linux-omap, Paul Walmsley, Herbert Xu,
David S. Miller, Mauro Carvalho Chehab, Kyungmin Park,
Helge Deller, Tero Kristo, Stephen Boyd, linux-media, linux-mtd,
linux-fbdev, dri-devel, linux-clk
Am 08.09.26 um 17:27 schrieb Arnd Bergmann:
> drivers/video/fbdev/omap2/omapfb/Kconfig | 2 +-
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> # omapfb
> include/linux/clk/ti.h | 8 -
> 86 files changed, 60 insertions(+), 10696 deletions(-)
> delete mode 100644 arch/arm/boot/dts/ti/omap/omap2.dtsi
> delete mode 100644 arch/arm/boot/dts/ti/omap/omap2420-clocks.dtsi
> delete mode 100644 arch/arm/boot/dts/ti/omap/omap2420-h4.dts
> delete mode 100644 arch/arm/boot/dts/ti/omap/omap2420-n800.dts
> delete mode 100644 arch/arm/boot/dts/ti/omap/omap2420-n810-wimax.dts
> delete mode 100644 arch/arm/boot/dts/ti/omap/omap2420-n810.dts
> delete mode 100644 arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi
> delete mode 100644 arch/arm/boot/dts/ti/omap/omap2420.dtsi
> delete mode 100644 arch/arm/boot/dts/ti/omap/omap2430-clocks.dtsi
> delete mode 100644 arch/arm/boot/dts/ti/omap/omap2430-sdp.dts
> delete mode 100644 arch/arm/boot/dts/ti/omap/omap2430.dtsi
> delete mode 100644 arch/arm/boot/dts/ti/omap/omap24xx-clocks.dtsi
> delete mode 100644 arch/arm/mach-omap2/board-n8x0.c
> delete mode 100644 arch/arm/mach-omap2/clkt2xxx_dpll.c
> delete mode 100644 arch/arm/mach-omap2/clkt2xxx_dpllcore.c
> delete mode 100644 arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
> delete mode 100644 arch/arm/mach-omap2/clock2xxx.h
> delete mode 100644 arch/arm/mach-omap2/clockdomains2420_data.c
> delete mode 100644 arch/arm/mach-omap2/clockdomains2430_data.c
> delete mode 100644 arch/arm/mach-omap2/cm-regbits-24xx.h
> delete mode 100644 arch/arm/mach-omap2/cm2xxx.c
> delete mode 100644 arch/arm/mach-omap2/cm2xxx.h
> delete mode 100644 arch/arm/mach-omap2/common-board-devices.h
> delete mode 100644 arch/arm/mach-omap2/gpmc.h
> delete mode 100644 arch/arm/mach-omap2/l3_2xxx.h
> delete mode 100644 arch/arm/mach-omap2/l4_2xxx.h
> delete mode 100644 arch/arm/mach-omap2/mmc.h
> delete mode 100644 arch/arm/mach-omap2/msdi.c
> delete mode 100644 arch/arm/mach-omap2/omap2-restart.c
> delete mode 100644 arch/arm/mach-omap2/omap24xx.h
> delete mode 100644 arch/arm/mach-omap2/omap_hwmod_2420_data.c
> delete mode 100644 arch/arm/mach-omap2/omap_hwmod_2430_data.c
> delete mode 100644 arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
> delete mode 100644 arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
> delete mode 100644 arch/arm/mach-omap2/opp2420_data.c
> delete mode 100644 arch/arm/mach-omap2/opp2430_data.c
> delete mode 100644 arch/arm/mach-omap2/opp2xxx.h
> delete mode 100644 arch/arm/mach-omap2/powerdomains2xxx_data.c
> delete mode 100644 arch/arm/mach-omap2/prm-regbits-24xx.h
> delete mode 100644 arch/arm/mach-omap2/prm2xxx.c
> delete mode 100644 arch/arm/mach-omap2/prm2xxx.h
> delete mode 100644 arch/arm/mach-omap2/sdrc2xxx.c
> delete mode 100644 arch/arm/mach-omap2/sleep24xx.S
> delete mode 100644 arch/arm/mach-omap2/sram242x.S
> delete mode 100644 arch/arm/mach-omap2/sram243x.S
> delete mode 100644 arch/arm/mach-omap2/usb-tusb6010.c
> delete mode 100644 arch/arm/mach-omap2/usb-tusb6010.h
> delete mode 100644 arch/arm/mach-omap2/voltagedomains2xxx_data.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 028db7ad15ad..0d10f778800d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19874,7 +19874,6 @@ M: Jarkko Nikula <jarkko.nikula@bitmer.com>
> L: linux-sound@vger.kernel.org
> L: linux-omap@vger.kernel.org
> S: Maintained
> -F: sound/soc/ti/n810.c
> F: sound/soc/ti/omap*
> F: sound/soc/ti/rx51.c
> F: sound/soc/ti/sdma-pcm.*
> @@ -20027,7 +20026,6 @@ F: drivers/gpio/gpio-tps65219.c
> F: drivers/i2c/busses/i2c-omap.c
> F: drivers/irqchip/irq-omap-intc.c
> F: drivers/mfd/*omap*.c
> -F: drivers/mfd/menelaus.c
> F: drivers/mfd/palmas.c
> F: drivers/mfd/tps65217.c
> F: drivers/mfd/tps65218.c
> diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile
> index 498c36ccb5ea..3c5d378df6b9 100644
> --- a/arch/arm/boot/dts/ti/omap/Makefile
> +++ b/arch/arm/boot/dts/ti/omap/Makefile
> @@ -1,10 +1,4 @@
> # SPDX-License-Identifier: GPL-2.0
> -dtb-$(CONFIG_ARCH_OMAP2) += \
> - omap2420-h4.dtb \
> - omap2420-n800.dtb \
> - omap2420-n810.dtb \
> - omap2420-n810-wimax.dtb \
> - omap2430-sdp.dtb
> dtb-$(CONFIG_ARCH_OMAP3) += \
> am3517-craneboard.dtb \
> am3517-evm.dtb \
> diff --git a/arch/arm/boot/dts/ti/omap/omap2.dtsi b/arch/arm/boot/dts/ti/omap/omap2.dtsi
> deleted file mode 100644
> index fdc1790adf43..000000000000
> --- a/arch/arm/boot/dts/ti/omap/omap2.dtsi
> +++ /dev/null
> @@ -1,338 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * Device Tree Source for OMAP2 SoC
> - *
> - * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
> - */
> -
> -#include <dt-bindings/bus/ti-sysc.h>
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/interrupt-controller/irq.h>
> -#include <dt-bindings/pinctrl/omap.h>
> -
> -/ {
> - compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
> - interrupt-parent = <&intc>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - chosen { };
> -
> - aliases {
> - serial0 = &uart1;
> - serial1 = &uart2;
> - serial2 = &uart3;
> - i2c0 = &i2c1;
> - i2c1 = &i2c2;
> - };
> -
> - cpus {
> - #address-cells = <0>;
> - #size-cells = <0>;
> -
> - cpu {
> - compatible = "arm,arm1136jf-s";
> - device_type = "cpu";
> - };
> - };
> -
> - pmu {
> - compatible = "arm,arm1136-pmu";
> - interrupts = <3>;
> - };
> -
> - soc {
> - compatible = "ti,omap-infra";
> - mpu {
> - compatible = "ti,omap2-mpu";
> - ti,hwmods = "mpu";
> - };
> - };
> -
> - ocp {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges;
> - ti,hwmods = "l3_main";
> -
> - aes: aes@480a6000 {
> - compatible = "ti,omap2-aes";
> - ti,hwmods = "aes";
> - reg = <0x480a6000 0x50>;
> - dmas = <&sdma 9 &sdma 10>;
> - dma-names = "tx", "rx";
> - };
> -
> - hdq1w: 1w@480b2000 {
> - compatible = "ti,omap2420-1w";
> - ti,hwmods = "hdq1w";
> - reg = <0x480b2000 0x1000>;
> - interrupts = <58>;
> - };
> -
> - intc: interrupt-controller@1 {
> - compatible = "ti,omap2-intc";
> - interrupt-controller;
> - #interrupt-cells = <1>;
> - reg = <0x480FE000 0x1000>;
> - };
> -
> - target-module@48056000 {
> - compatible = "ti,sysc-omap2", "ti,sysc";
> - reg = <0x48056000 0x4>,
> - <0x4805602c 0x4>,
> - <0x48056028 0x4>;
> - reg-names = "rev", "sysc", "syss";
> - ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
> - SYSC_OMAP2_EMUFREE |
> - SYSC_OMAP2_SOFTRESET |
> - SYSC_OMAP2_AUTOIDLE)>;
> - ti,sysc-midle = <SYSC_IDLE_FORCE>,
> - <SYSC_IDLE_NO>,
> - <SYSC_IDLE_SMART>;
> - ti,syss-mask = <1>;
> - clocks = <&core_l3_ck>;
> - clock-names = "fck";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0x48056000 0x1000>;
> -
> - sdma: dma-controller@0 {
> - compatible = "ti,omap2420-sdma", "ti,omap-sdma";
> - reg = <0 0x1000>;
> - interrupts = <12>,
> - <13>,
> - <14>,
> - <15>;
> - #dma-cells = <1>;
> - dma-channels = <32>;
> - dma-requests = <64>;
> - };
> - };
> -
> - i2c1: i2c@48070000 {
> - compatible = "ti,omap2-i2c";
> - ti,hwmods = "i2c1";
> - reg = <0x48070000 0x80>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - interrupts = <56>;
> - };
> -
> - i2c2: i2c@48072000 {
> - compatible = "ti,omap2-i2c";
> - ti,hwmods = "i2c2";
> - reg = <0x48072000 0x80>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - interrupts = <57>;
> - };
> -
> - mcspi1: spi@48098000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "ti,omap2-mcspi";
> - ti,hwmods = "mcspi1";
> - reg = <0x48098000 0x100>;
> - interrupts = <65>;
> - dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38
> - &sdma 39 &sdma 40 &sdma 41 &sdma 42>;
> - dma-names = "tx0", "rx0", "tx1", "rx1",
> - "tx2", "rx2", "tx3", "rx3";
> - };
> -
> - mcspi2: spi@4809a000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "ti,omap2-mcspi";
> - ti,hwmods = "mcspi2";
> - reg = <0x4809a000 0x100>;
> - interrupts = <66>;
> - dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>;
> - dma-names = "tx0", "rx0", "tx1", "rx1";
> - };
> -
> - rng: rng@480a0000 {
> - compatible = "ti,omap2-rng";
> - ti,hwmods = "rng";
> - reg = <0x480a0000 0x50>;
> - interrupts = <52>;
> - };
> -
> - sham: sham@480a4000 {
> - compatible = "ti,omap2-sham";
> - ti,hwmods = "sham";
> - reg = <0x480a4000 0x64>;
> - interrupts = <51>;
> - dmas = <&sdma 13>;
> - dma-names = "rx";
> - };
> -
> - uart1: serial@4806a000 {
> - compatible = "ti,omap2-uart";
> - ti,hwmods = "uart1";
> - reg = <0x4806a000 0x2000>;
> - interrupts = <72>;
> - dmas = <&sdma 49 &sdma 50>;
> - dma-names = "tx", "rx";
> - clock-frequency = <48000000>;
> - };
> -
> - uart2: serial@4806c000 {
> - compatible = "ti,omap2-uart";
> - ti,hwmods = "uart2";
> - reg = <0x4806c000 0x400>;
> - interrupts = <73>;
> - dmas = <&sdma 51 &sdma 52>;
> - dma-names = "tx", "rx";
> - clock-frequency = <48000000>;
> - };
> -
> - uart3: serial@4806e000 {
> - compatible = "ti,omap2-uart";
> - ti,hwmods = "uart3";
> - reg = <0x4806e000 0x400>;
> - interrupts = <74>;
> - dmas = <&sdma 53 &sdma 54>;
> - dma-names = "tx", "rx";
> - clock-frequency = <48000000>;
> - };
> -
> - timer2_target: target-module@4802a000 {
> - compatible = "ti,sysc-omap2-timer", "ti,sysc";
> - reg = <0x4802a000 0x4>,
> - <0x4802a010 0x4>,
> - <0x4802a014 0x4>;
> - reg-names = "rev", "sysc", "syss";
> - ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
> - SYSC_OMAP2_EMUFREE |
> - SYSC_OMAP2_ENAWAKEUP |
> - SYSC_OMAP2_SOFTRESET |
> - SYSC_OMAP2_AUTOIDLE)>;
> - ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> - <SYSC_IDLE_NO>,
> - <SYSC_IDLE_SMART>;
> - ti,syss-mask = <1>;
> - clocks = <&gpt2_fck>, <&gpt2_ick>;
> - clock-names = "fck", "ick";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0x0 0x4802a000 0x1000>;
> -
> - timer2: timer@0 {
> - compatible = "ti,omap2420-timer";
> - reg = <0 0x400>;
> - interrupts = <38>;
> - };
> - };
> -
> - timer3: timer@48078000 {
> - compatible = "ti,omap2420-timer";
> - reg = <0x48078000 0x400>;
> - interrupts = <39>;
> - ti,hwmods = "timer3";
> - };
> -
> - timer4: timer@4807a000 {
> - compatible = "ti,omap2420-timer";
> - reg = <0x4807a000 0x400>;
> - interrupts = <40>;
> - ti,hwmods = "timer4";
> - };
> -
> - timer5: timer@4807c000 {
> - compatible = "ti,omap2420-timer";
> - reg = <0x4807c000 0x400>;
> - interrupts = <41>;
> - ti,hwmods = "timer5";
> - ti,timer-dsp;
> - };
> -
> - timer6: timer@4807e000 {
> - compatible = "ti,omap2420-timer";
> - reg = <0x4807e000 0x400>;
> - interrupts = <42>;
> - ti,hwmods = "timer6";
> - ti,timer-dsp;
> - };
> -
> - timer7: timer@48080000 {
> - compatible = "ti,omap2420-timer";
> - reg = <0x48080000 0x400>;
> - interrupts = <43>;
> - ti,hwmods = "timer7";
> - ti,timer-dsp;
> - };
> -
> - timer8: timer@48082000 {
> - compatible = "ti,omap2420-timer";
> - reg = <0x48082000 0x400>;
> - interrupts = <44>;
> - ti,hwmods = "timer8";
> - ti,timer-dsp;
> - };
> -
> - timer9: timer@48084000 {
> - compatible = "ti,omap2420-timer";
> - reg = <0x48084000 0x400>;
> - interrupts = <45>;
> - ti,hwmods = "timer9";
> - ti,timer-pwm;
> - };
> -
> - timer10: timer@48086000 {
> - compatible = "ti,omap2420-timer";
> - reg = <0x48086000 0x400>;
> - interrupts = <46>;
> - ti,hwmods = "timer10";
> - ti,timer-pwm;
> - };
> -
> - timer11: timer@48088000 {
> - compatible = "ti,omap2420-timer";
> - reg = <0x48088000 0x400>;
> - interrupts = <47>;
> - ti,hwmods = "timer11";
> - ti,timer-pwm;
> - };
> -
> - timer12: timer@4808a000 {
> - compatible = "ti,omap2420-timer";
> - reg = <0x4808a000 0x400>;
> - interrupts = <48>;
> - ti,hwmods = "timer12";
> - ti,timer-pwm;
> - };
> -
> - dss: dss@48050000 {
> - compatible = "ti,omap2-dss";
> - reg = <0x48050000 0x400>;
> - status = "disabled";
> - ti,hwmods = "dss_core";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges;
> -
> - dispc@48050400 {
> - compatible = "ti,omap2-dispc";
> - reg = <0x48050400 0x400>;
> - interrupts = <25>;
> - ti,hwmods = "dss_dispc";
> - };
> -
> - rfbi: encoder@48050800 {
> - compatible = "ti,omap2-rfbi";
> - reg = <0x48050800 0x400>;
> - status = "disabled";
> - ti,hwmods = "dss_rfbi";
> - };
> -
> - venc: encoder@48050c00 {
> - compatible = "ti,omap2-venc";
> - reg = <0x48050c00 0x400>;
> - status = "disabled";
> - ti,hwmods = "dss_venc";
> - };
> - };
> - };
> -};
> diff --git a/arch/arm/boot/dts/ti/omap/omap2420-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap2420-clocks.dtsi
> deleted file mode 100644
> index 00a7a199a91c..000000000000
> --- a/arch/arm/boot/dts/ti/omap/omap2420-clocks.dtsi
> +++ /dev/null
> @@ -1,267 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * Device Tree Source for OMAP2420 clock data
> - *
> - * Copyright (C) 2014 Texas Instruments, Inc.
> - */
> -
> -&prcm_clocks {
> - sys_clkout2_src_gate: sys_clkout2_src_gate@70 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-no-wait-gate-clock";
> - clocks = <&core_ck>;
> - ti,bit-shift = <15>;
> - reg = <0x0070>;
> - };
> -
> - sys_clkout2_src_mux: sys_clkout2_src_mux@70 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
> - ti,bit-shift = <8>;
> - reg = <0x0070>;
> - };
> -
> - sys_clkout2_src: sys_clkout2_src {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&sys_clkout2_src_gate>, <&sys_clkout2_src_mux>;
> - };
> -
> - sys_clkout2: sys_clkout2@70 {
> - #clock-cells = <0>;
> - compatible = "ti,divider-clock";
> - clocks = <&sys_clkout2_src>;
> - ti,bit-shift = <11>;
> - ti,max-div = <64>;
> - reg = <0x0070>;
> - ti,index-power-of-two;
> - };
> -
> - dsp_gate_ick: dsp_gate_ick@810 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-interface-clock";
> - clocks = <&dsp_fck>;
> - ti,bit-shift = <1>;
> - reg = <0x0810>;
> - };
> -
> - dsp_div_ick: dsp_div_ick@840 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-divider-clock";
> - clocks = <&dsp_fck>;
> - ti,bit-shift = <5>;
> - ti,max-div = <3>;
> - reg = <0x0840>;
> - ti,index-starts-at-one;
> - };
> -
> - dsp_ick: dsp_ick {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&dsp_gate_ick>, <&dsp_div_ick>;
> - };
> -
> - iva1_gate_ifck: iva1_gate_ifck@800 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&core_ck>;
> - ti,bit-shift = <10>;
> - reg = <0x0800>;
> - };
> -
> - iva1_div_ifck: iva1_div_ifck@840 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-divider-clock";
> - clocks = <&core_ck>;
> - ti,bit-shift = <8>;
> - reg = <0x0840>;
> - ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
> - };
> -
> - iva1_ifck: iva1_ifck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&iva1_gate_ifck>, <&iva1_div_ifck>;
> - };
> -
> - iva1_ifck_div: iva1_ifck_div {
> - #clock-cells = <0>;
> - compatible = "fixed-factor-clock";
> - clocks = <&iva1_ifck>;
> - clock-mult = <1>;
> - clock-div = <2>;
> - };
> -
> - iva1_mpu_int_ifck: iva1_mpu_int_ifck@800 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&iva1_ifck_div>;
> - ti,bit-shift = <8>;
> - reg = <0x0800>;
> - };
> -
> - wdt3_ick: wdt3_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <28>;
> - reg = <0x0210>;
> - };
> -
> - wdt3_fck: wdt3_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_32k_ck>;
> - ti,bit-shift = <28>;
> - reg = <0x0200>;
> - };
> -
> - mmc_ick: mmc_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <26>;
> - reg = <0x0210>;
> - };
> -
> - mmc_fck: mmc_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_96m_ck>;
> - ti,bit-shift = <26>;
> - reg = <0x0200>;
> - };
> -
> - eac_ick: eac_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <24>;
> - reg = <0x0210>;
> - };
> -
> - eac_fck: eac_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_96m_ck>;
> - ti,bit-shift = <24>;
> - reg = <0x0200>;
> - };
> -
> - i2c1_fck: i2c1_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_12m_ck>;
> - ti,bit-shift = <19>;
> - reg = <0x0200>;
> - };
> -
> - i2c2_fck: i2c2_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_12m_ck>;
> - ti,bit-shift = <20>;
> - reg = <0x0200>;
> - };
> -
> - vlynq_ick: vlynq_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&core_l3_ck>;
> - ti,bit-shift = <3>;
> - reg = <0x0210>;
> - };
> -
> - vlynq_gate_fck: vlynq_gate_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&core_ck>;
> - ti,bit-shift = <3>;
> - reg = <0x0200>;
> - };
> -
> - core_d18_ck: core_d18_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-factor-clock";
> - clocks = <&core_ck>;
> - clock-mult = <1>;
> - clock-div = <18>;
> - };
> -
> - vlynq_mux_fck: vlynq_mux_fck@240 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&func_96m_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&dummy_ck>, <&core_d6_ck>, <&dummy_ck>, <&core_d8_ck>, <&core_d9_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d12_ck>, <&dummy_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d16_ck>, <&dummy_ck>, <&core_d18_ck>;
> - ti,bit-shift = <15>;
> - reg = <0x0240>;
> - };
> -
> - vlynq_fck: vlynq_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&vlynq_gate_fck>, <&vlynq_mux_fck>;
> - };
> -};
> -
> -&prcm_clockdomains {
> - gfx_clkdm: gfx_clkdm {
> - compatible = "ti,clockdomain";
> - clocks = <&gfx_ick>;
> - };
> -
> - core_l3_clkdm: core_l3_clkdm {
> - compatible = "ti,clockdomain";
> - clocks = <&cam_fck>, <&vlynq_ick>, <&usb_fck>;
> - };
> -
> - wkup_clkdm: wkup_clkdm {
> - compatible = "ti,clockdomain";
> - clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
> - <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
> - <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>;
> - };
> -
> - iva1_clkdm: iva1_clkdm {
> - compatible = "ti,clockdomain";
> - clocks = <&iva1_mpu_int_ifck>;
> - };
> -
> - dss_clkdm: dss_clkdm {
> - compatible = "ti,clockdomain";
> - clocks = <&dss_ick>, <&dss_54m_fck>;
> - };
> -
> - core_l4_clkdm: core_l4_clkdm {
> - compatible = "ti,clockdomain";
> - clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
> - <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
> - <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
> - <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcspi1_ick>,
> - <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
> - <&uart1_ick>, <&uart1_fck>, <&uart2_ick>, <&uart2_fck>,
> - <&uart3_ick>, <&uart3_fck>, <&cam_ick>,
> - <&mailboxes_ick>, <&wdt4_ick>, <&wdt4_fck>,
> - <&wdt3_ick>, <&wdt3_fck>, <&mspro_ick>, <&mspro_fck>,
> - <&mmc_ick>, <&mmc_fck>, <&fac_ick>, <&fac_fck>,
> - <&eac_ick>, <&eac_fck>, <&hdq_ick>, <&hdq_fck>,
> - <&i2c1_ick>, <&i2c1_fck>, <&i2c2_ick>, <&i2c2_fck>,
> - <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
> - <&pka_ick>;
> - };
> -};
> -
> -&func_96m_ck {
> - compatible = "fixed-factor-clock";
> - clocks = <&apll96_ck>;
> - clock-mult = <1>;
> - clock-div = <1>;
> -};
> -
> -&dsp_div_fck {
> - ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
> -};
> -
> -&ssi_ssr_sst_div_fck {
> - ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
> -};
> diff --git a/arch/arm/boot/dts/ti/omap/omap2420-h4.dts b/arch/arm/boot/dts/ti/omap/omap2420-h4.dts
> deleted file mode 100644
> index 5acf5dd87c59..000000000000
> --- a/arch/arm/boot/dts/ti/omap/omap2420-h4.dts
> +++ /dev/null
> @@ -1,63 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
> - */
> -/dts-v1/;
> -
> -#include "omap2420.dtsi"
> -
> -/ {
> - model = "TI OMAP2420 H4 board";
> - compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
> -
> - memory@80000000 {
> - device_type = "memory";
> - reg = <0x80000000 0x4000000>; /* 64 MB */
> - };
> -};
> -
> -&gpmc {
> - ranges = <0 0 0x08000000 0x04000000>;
> -
> - nor@0,0 {
> - compatible = "cfi-flash";
> - linux,mtd-name = "intel,ge28f256l18b85";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - reg = <0 0 0x04000000>;
> - bank-width = <2>;
> -
> - gpmc,mux-add-data = <2>;
> - gpmc,cs-on-ns = <10>;
> - gpmc,cs-rd-off-ns = <160>;
> - gpmc,cs-wr-off-ns = <160>;
> - gpmc,adv-on-ns = <20>;
> - gpmc,adv-rd-off-ns = <50>;
> - gpmc,adv-wr-off-ns = <50>;
> - gpmc,oe-on-ns = <60>;
> - gpmc,oe-off-ns = <120>;
> - gpmc,we-on-ns = <60>;
> - gpmc,we-off-ns = <120>;
> - gpmc,rd-cycle-ns = <170>;
> - gpmc,wr-cycle-ns = <170>;
> - gpmc,access-ns = <150>;
> - gpmc,page-burst-access-ns = <10>;
> -
> - partition@0 {
> - label = "bootloader";
> - reg = <0 0x20000>;
> - };
> - partition@20000 {
> - label = "params";
> - reg = <0x20000 0x20000>;
> - };
> - partition@40000 {
> - label = "kernel";
> - reg = <0x40000 0x200000>;
> - };
> - partition@240000 {
> - label = "file-system";
> - reg = <0x240000 0x3dc0000>;
> - };
> - };
> -};
> diff --git a/arch/arm/boot/dts/ti/omap/omap2420-n800.dts b/arch/arm/boot/dts/ti/omap/omap2420-n800.dts
> deleted file mode 100644
> index f06d767e818b..000000000000
> --- a/arch/arm/boot/dts/ti/omap/omap2420-n800.dts
> +++ /dev/null
> @@ -1,9 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/dts-v1/;
> -
> -#include "omap2420-n8x0-common.dtsi"
> -
> -/ {
> - model = "Nokia N800";
> - compatible = "nokia,n800", "nokia,n8x0", "ti,omap2420", "ti,omap2";
> -};
> diff --git a/arch/arm/boot/dts/ti/omap/omap2420-n810-wimax.dts b/arch/arm/boot/dts/ti/omap/omap2420-n810-wimax.dts
> deleted file mode 100644
> index ac9acbd609b6..000000000000
> --- a/arch/arm/boot/dts/ti/omap/omap2420-n810-wimax.dts
> +++ /dev/null
> @@ -1,9 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/dts-v1/;
> -
> -#include "omap2420-n8x0-common.dtsi"
> -
> -/ {
> - model = "Nokia N810 WiMax";
> - compatible = "nokia,n810-wimax", "nokia,n8x0", "ti,omap2420", "ti,omap2";
> -};
> diff --git a/arch/arm/boot/dts/ti/omap/omap2420-n810.dts b/arch/arm/boot/dts/ti/omap/omap2420-n810.dts
> deleted file mode 100644
> index 3bf8175d85a8..000000000000
> --- a/arch/arm/boot/dts/ti/omap/omap2420-n810.dts
> +++ /dev/null
> @@ -1,75 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/dts-v1/;
> -
> -#include "omap2420-n8x0-common.dtsi"
> -
> -/ {
> - model = "Nokia N810";
> - compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2";
> -
> - vio_ape: vio_ape {
> - compatible = "regulator-fixed";
> - regulator-name = "vio_ape";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - };
> -
> - v28_aic: v28_aic {
> - compatible = "regulator-fixed";
> - regulator-name = "v28_aic";
> - regulator-min-microvolt = <2800000>;
> - regulator-max-microvolt = <2800000>;
> - };
> -};
> -
> -&omap2420_pmx {
> - mcbsp2_pins: mcbsp2-pins {
> - pinctrl-single,pins = <
> - OMAP2420_CORE_IOPAD(0x0124, PIN_INPUT | MUX_MODE1) /* eac_ac_sclk.mcbsp2_clkx */
> - OMAP2420_CORE_IOPAD(0x0125, PIN_INPUT | MUX_MODE1) /* eac_ac_fs.mcbsp2_fsx */
> - OMAP2420_CORE_IOPAD(0x0126, PIN_INPUT | MUX_MODE1) /* eac_ac_din.mcbsp2_dr */
> - OMAP2420_CORE_IOPAD(0x0127, PIN_OUTPUT | MUX_MODE1) /* eac_ac_dout.mcbsp2_dx */
> - >;
> - };
> -
> - aic33_pins: aic33-pins {
> - pinctrl-single,pins = <
> - OMAP2420_CORE_IOPAD(0x0129, PIN_OUTPUT | MUX_MODE3) /* eac_ac_rst.gpio118 */
> - OMAP2420_CORE_IOPAD(0x00e8, PIN_OUTPUT | MUX_MODE2) /* vlynq_tx1.sys_clkout2 */
> - >;
> - };
> -};
> -
> -&i2c2 {
> - aic33@18 {
> - compatible = "ti,tlv320aic33";
> - reg = <0x18>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&aic33_pins>;
> -
> - reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */
> -
> - ai3x-gpio-func = <
> - 10 /* AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK */
> - 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
> - >;
> - ai3x-micbias-vg = <1>; /* 2V */
> -
> - AVDD-supply = <&v28_aic>;
> - DRVDD-supply = <&v28_aic>;
> - IOVDD-supply = <&vio_ape>;
> - DVDD-supply = <&vio_ape>;
> -
> - assigned-clocks = <&sys_clkout2_src>, <&sys_clkout2>;
> - assigned-clock-parents = <&func_96m_ck>;
> - assigned-clock-rates = <0>, <12000000>;
> - };
> -};
> -
> -&mcbsp2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&mcbsp2_pins>;
> -
> - status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi
> deleted file mode 100644
> index fe9dd8bbfc85..000000000000
> --- a/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi
> +++ /dev/null
> @@ -1,123 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -#include "omap2420.dtsi"
> -
> -/ {
> - memory@80000000 {
> - device_type = "memory";
> - reg = <0x80000000 0x8000000>; /* 128 MB */
> - };
> -
> - chosen {
> - stdout-path = &uart3;
> - };
> -
> - ocp {
> - i2c0 {
> - compatible = "i2c-cbus-gpio";
> - gpios = <&gpio3 2 GPIO_ACTIVE_HIGH /* gpio66 clk */
> - &gpio3 1 GPIO_ACTIVE_HIGH /* gpio65 dat */
> - &gpio3 0 GPIO_ACTIVE_HIGH /* gpio64 sel */
> - >;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - retu: retu@1 {
> - compatible = "nokia,retu";
> - interrupt-parent = <&gpio4>;
> - interrupts = <12 IRQ_TYPE_EDGE_RISING>;
> - reg = <0x1>;
> - };
> - };
> - };
> -};
> -
> -&i2c1 {
> - clock-frequency = <400000>;
> -
> - pmic@72 {
> - compatible = "menelaus";
> - reg = <0x72>;
> - interrupts = <7 IRQ_TYPE_EDGE_RISING>;
> - };
> -};
> -
> -&i2c2 {
> - clock-frequency = <400000>;
> -};
> -
> -&gpmc {
> - ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */
> -
> - /* gpio-irq for dma: 26 */
> -
> - onenand@0,0 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "ti,omap2-onenand";
> - reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
> -
> - gpmc,sync-read;
> - gpmc,burst-length = <16>;
> - gpmc,burst-read;
> - gpmc,burst-wrap;
> - gpmc,device-width = <2>;
> - gpmc,mux-add-data = <2>;
> - gpmc,cs-on-ns = <0>;
> - gpmc,cs-rd-off-ns = <127>;
> - gpmc,cs-wr-off-ns = <109>;
> - gpmc,adv-on-ns = <0>;
> - gpmc,adv-rd-off-ns = <18>;
> - gpmc,adv-wr-off-ns = <18>;
> - gpmc,oe-on-ns = <27>;
> - gpmc,oe-off-ns = <127>;
> - gpmc,we-on-ns = <27>;
> - gpmc,we-off-ns = <72>;
> - gpmc,rd-cycle-ns = <145>;
> - gpmc,wr-cycle-ns = <136>;
> - gpmc,access-ns = <118>;
> - gpmc,page-burst-access-ns = <27>;
> - gpmc,bus-turnaround-ns = <0>;
> - gpmc,cycle2cycle-delay-ns = <0>;
> - gpmc,wait-monitoring-ns = <0>;
> - gpmc,clk-activation-ns = <9>;
> - gpmc,sync-clk-ps = <27000>;
> -
> - /* MTD partition table corresponding to old board-n8x0 file. */
> - partition@0 {
> - label = "bootloader";
> - reg = <0x00000000 0x00020000>;
> - read-only;
> - };
> - partition@1 {
> - label = "config";
> - reg = <0x00020000 0x00060000>;
> - };
> - partition@2 {
> - label = "kernel";
> - reg = <0x00080000 0x00200000>;
> - };
> - partition@3 {
> - label = "initfs";
> - reg = <0x00280000 0x00400000>;
> - };
> - partition@4 {
> - label = "rootfs";
> - reg = <0x00680000 0x0f980000>;
> - };
> - partition@5 {
> - label = "omap2-onenand";
> - reg = <0x00000000 0x10000000>;
> - };
> - };
> -};
> -
> -&mcspi2 {
> - status = "okay";
> -
> - wifi@0 {
> - reg = <0>;
> - compatible = "st,stlc4560";
> - spi-max-frequency = <48000000>;
> - interrupts-extended = <&gpio3 23 IRQ_TYPE_EDGE_RISING>;
> - powerdown-gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* gpio 97 */
> - };
> -};
> diff --git a/arch/arm/boot/dts/ti/omap/omap2420.dtsi b/arch/arm/boot/dts/ti/omap/omap2420.dtsi
> deleted file mode 100644
> index 821da51cb870..000000000000
> --- a/arch/arm/boot/dts/ti/omap/omap2420.dtsi
> +++ /dev/null
> @@ -1,262 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * Device Tree Source for OMAP2420 SoC
> - *
> - * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
> - */
> -
> -#include "omap2.dtsi"
> -
> -/ {
> - compatible = "ti,omap2420", "ti,omap2";
> -
> - ocp {
> - l4: l4@48000000 {
> - compatible = "ti,omap2-l4", "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0x48000000 0x100000>;
> -
> - prcm: prcm@8000 {
> - compatible = "ti,omap2-prcm";
> - reg = <0x8000 0x1000>;
> -
> - prcm_clocks: clocks {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> -
> - prcm_clockdomains: clockdomains {
> - };
> - };
> -
> - scm: scm@0 {
> - compatible = "ti,omap2-scm", "simple-bus";
> - reg = <0x0 0x1000>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - #pinctrl-cells = <1>;
> - ranges = <0 0x0 0x1000>;
> -
> - omap2420_pmx: pinmux@30 {
> - compatible = "ti,omap2420-padconf",
> - "pinctrl-single";
> - reg = <0x30 0x0113>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - #pinctrl-cells = <1>;
> - pinctrl-single,register-width = <8>;
> - pinctrl-single,function-mask = <0x3f>;
> - };
> -
> - scm_conf: scm_conf@270 {
> - compatible = "syscon";
> - reg = <0x270 0x100>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> -
> - scm_clocks: clocks {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> - };
> -
> - scm_clockdomains: clockdomains {
> - };
> - };
> -
> - target-module@4000 {
> - compatible = "ti,sysc-omap2", "ti,sysc";
> - reg = <0x4000 0x4>,
> - <0x4004 0x4>;
> - reg-names = "rev", "sysc";
> - ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> - <SYSC_IDLE_NO>;
> - clocks = <&func_32k_ck>;
> - clock-names = "fck";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0x0 0x4000 0x1000>;
> -
> - counter32k: counter@0 {
> - compatible = "ti,omap-counter32k";
> - reg = <0 0x20>;
> - };
> - };
> - };
> -
> - gpio1: gpio@48018000 {
> - compatible = "ti,omap2-gpio";
> - reg = <0x48018000 0x200>;
> - interrupts = <29>;
> - ti,hwmods = "gpio1";
> - ti,gpio-always-on;
> - #gpio-cells = <2>;
> - gpio-controller;
> - #interrupt-cells = <2>;
> - interrupt-controller;
> - };
> -
> - gpio2: gpio@4801a000 {
> - compatible = "ti,omap2-gpio";
> - reg = <0x4801a000 0x200>;
> - interrupts = <30>;
> - ti,hwmods = "gpio2";
> - ti,gpio-always-on;
> - #gpio-cells = <2>;
> - gpio-controller;
> - #interrupt-cells = <2>;
> - interrupt-controller;
> - };
> -
> - gpio3: gpio@4801c000 {
> - compatible = "ti,omap2-gpio";
> - reg = <0x4801c000 0x200>;
> - interrupts = <31>;
> - ti,hwmods = "gpio3";
> - ti,gpio-always-on;
> - #gpio-cells = <2>;
> - gpio-controller;
> - #interrupt-cells = <2>;
> - interrupt-controller;
> - };
> -
> - gpio4: gpio@4801e000 {
> - compatible = "ti,omap2-gpio";
> - reg = <0x4801e000 0x200>;
> - interrupts = <32>;
> - ti,hwmods = "gpio4";
> - ti,gpio-always-on;
> - #gpio-cells = <2>;
> - gpio-controller;
> - #interrupt-cells = <2>;
> - interrupt-controller;
> - };
> -
> - gpmc: gpmc@6800a000 {
> - compatible = "ti,omap2420-gpmc";
> - reg = <0x6800a000 0x1000>;
> - #address-cells = <2>;
> - #size-cells = <1>;
> - interrupts = <20>;
> - gpmc,num-cs = <8>;
> - gpmc,num-waitpins = <4>;
> - ti,hwmods = "gpmc";
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> - mcbsp1: mcbsp@48074000 {
> - compatible = "ti,omap2420-mcbsp";
> - reg = <0x48074000 0xff>;
> - reg-names = "mpu";
> - interrupts = <59>, /* TX interrupt */
> - <60>; /* RX interrupt */
> - interrupt-names = "tx", "rx";
> - ti,hwmods = "mcbsp1";
> - dmas = <&sdma 31>,
> - <&sdma 32>;
> - dma-names = "tx", "rx";
> - status = "disabled";
> - };
> -
> - mcbsp2: mcbsp@48076000 {
> - compatible = "ti,omap2420-mcbsp";
> - reg = <0x48076000 0xff>;
> - reg-names = "mpu";
> - interrupts = <62>, /* TX interrupt */
> - <63>; /* RX interrupt */
> - interrupt-names = "tx", "rx";
> - ti,hwmods = "mcbsp2";
> - dmas = <&sdma 33>,
> - <&sdma 34>;
> - dma-names = "tx", "rx";
> - status = "disabled";
> - };
> -
> - msdi1: mmc@4809c000 {
> - compatible = "ti,omap2420-mmc";
> - ti,hwmods = "msdi1";
> - reg = <0x4809c000 0x80>;
> - interrupts = <83>;
> - dmas = <&sdma 61 &sdma 62>;
> - dma-names = "tx", "rx";
> - };
> -
> - mailbox: mailbox@48094000 {
> - compatible = "ti,omap2-mailbox";
> - reg = <0x48094000 0x200>;
> - interrupts = <26>, <34>;
> - ti,hwmods = "mailbox";
> - #mbox-cells = <1>;
> - ti,mbox-num-users = <4>;
> - ti,mbox-num-fifos = <6>;
> - mbox_dsp: mbox-dsp {
> - ti,mbox-tx = <0 0 0>;
> - ti,mbox-rx = <1 0 0>;
> - };
> - mbox_iva: mbox-iva {
> - ti,mbox-tx = <2 1 3>;
> - ti,mbox-rx = <3 1 3>;
> - };
> - };
> -
> - timer1_target: target-module@48028000 {
> - compatible = "ti,sysc-omap2-timer", "ti,sysc";
> - reg = <0x48028000 0x4>,
> - <0x48028010 0x4>,
> - <0x48028014 0x4>;
> - reg-names = "rev", "sysc", "syss";
> - ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
> - SYSC_OMAP2_EMUFREE |
> - SYSC_OMAP2_ENAWAKEUP |
> - SYSC_OMAP2_SOFTRESET |
> - SYSC_OMAP2_AUTOIDLE)>;
> - ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> - <SYSC_IDLE_NO>,
> - <SYSC_IDLE_SMART>;
> - ti,syss-mask = <1>;
> - clocks = <&gpt1_fck>, <&gpt1_ick>;
> - clock-names = "fck", "ick";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0x0 0x48028000 0x1000>;
> -
> - timer1: timer@0 {
> - compatible = "ti,omap2420-timer";
> - reg = <0 0x400>;
> - interrupts = <37>;
> - ti,timer-alwon;
> - };
> - };
> -
> - wd_timer2: wdt@48022000 {
> - compatible = "ti,omap2-wdt";
> - ti,hwmods = "wd_timer2";
> - reg = <0x48022000 0x80>;
> - };
> - };
> -};
> -
> -&i2c1 {
> - compatible = "ti,omap2420-i2c";
> -};
> -
> -&i2c2 {
> - compatible = "ti,omap2420-i2c";
> -};
> -
> -#include "omap24xx-clocks.dtsi"
> -#include "omap2420-clocks.dtsi"
> -
> -/* Preferred always-on timer for clockevent */
> -&timer1_target {
> - ti,no-reset-on-init;
> - ti,no-idle;
> - timer@0 {
> - assigned-clocks = <&gpt1_fck>;
> - assigned-clock-parents = <&func_32k_ck>;
> - };
> -};
> diff --git a/arch/arm/boot/dts/ti/omap/omap2430-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap2430-clocks.dtsi
> deleted file mode 100644
> index 4e5ab5189476..000000000000
> --- a/arch/arm/boot/dts/ti/omap/omap2430-clocks.dtsi
> +++ /dev/null
> @@ -1,341 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * Device Tree Source for OMAP2430 clock data
> - *
> - * Copyright (C) 2014 Texas Instruments, Inc.
> - */
> -
> -&scm_clocks {
> - mcbsp3_mux_fck: mcbsp3_mux_fck@78 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&func_96m_ck>, <&mcbsp_clks>;
> - reg = <0x78>;
> - };
> -
> - mcbsp3_fck: mcbsp3_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
> - };
> -
> - mcbsp4_mux_fck: mcbsp4_mux_fck@78 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&func_96m_ck>, <&mcbsp_clks>;
> - ti,bit-shift = <2>;
> - reg = <0x78>;
> - };
> -
> - mcbsp4_fck: mcbsp4_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
> - };
> -
> - mcbsp5_mux_fck: mcbsp5_mux_fck@78 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&func_96m_ck>, <&mcbsp_clks>;
> - ti,bit-shift = <4>;
> - reg = <0x78>;
> - };
> -
> - mcbsp5_fck: mcbsp5_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
> - };
> -};
> -
> -&prcm_clocks {
> - iva2_1_gate_ick: iva2_1_gate_ick@800 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&dsp_fck>;
> - ti,bit-shift = <0>;
> - reg = <0x0800>;
> - };
> -
> - iva2_1_div_ick: iva2_1_div_ick@840 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-divider-clock";
> - clocks = <&dsp_fck>;
> - ti,bit-shift = <5>;
> - ti,max-div = <3>;
> - reg = <0x0840>;
> - ti,index-starts-at-one;
> - };
> -
> - iva2_1_ick: iva2_1_ick {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&iva2_1_gate_ick>, <&iva2_1_div_ick>;
> - };
> -
> - mdm_gate_ick: mdm_gate_ick@c10 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-interface-clock";
> - clocks = <&core_ck>;
> - ti,bit-shift = <0>;
> - reg = <0x0c10>;
> - };
> -
> - mdm_div_ick: mdm_div_ick@c40 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-divider-clock";
> - clocks = <&core_ck>;
> - reg = <0x0c40>;
> - ti,dividers = <0>, <1>, <0>, <0>, <4>, <0>, <6>, <0>, <0>, <9>;
> - };
> -
> - mdm_ick: mdm_ick {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&mdm_gate_ick>, <&mdm_div_ick>;
> - };
> -
> - mdm_osc_ck: mdm_osc_ck@c00 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&osc_ck>;
> - ti,bit-shift = <1>;
> - reg = <0x0c00>;
> - };
> -
> - mcbsp3_ick: mcbsp3_ick@214 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <3>;
> - reg = <0x0214>;
> - };
> -
> - mcbsp3_gate_fck: mcbsp3_gate_fck@204 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&mcbsp_clks>;
> - ti,bit-shift = <3>;
> - reg = <0x0204>;
> - };
> -
> - mcbsp4_ick: mcbsp4_ick@214 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <4>;
> - reg = <0x0214>;
> - };
> -
> - mcbsp4_gate_fck: mcbsp4_gate_fck@204 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&mcbsp_clks>;
> - ti,bit-shift = <4>;
> - reg = <0x0204>;
> - };
> -
> - mcbsp5_ick: mcbsp5_ick@214 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <5>;
> - reg = <0x0214>;
> - };
> -
> - mcbsp5_gate_fck: mcbsp5_gate_fck@204 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&mcbsp_clks>;
> - ti,bit-shift = <5>;
> - reg = <0x0204>;
> - };
> -
> - mcspi3_ick: mcspi3_ick@214 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <9>;
> - reg = <0x0214>;
> - };
> -
> - mcspi3_fck: mcspi3_fck@204 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_48m_ck>;
> - ti,bit-shift = <9>;
> - reg = <0x0204>;
> - };
> -
> - icr_ick: icr_ick@410 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&sys_ck>;
> - ti,bit-shift = <6>;
> - reg = <0x0410>;
> - };
> -
> - i2chs1_fck: i2chs1_fck@204 {
> - #clock-cells = <0>;
> - compatible = "ti,omap2430-interface-clock";
> - clocks = <&func_96m_ck>;
> - ti,bit-shift = <19>;
> - reg = <0x0204>;
> - };
> -
> - i2chs2_fck: i2chs2_fck@204 {
> - #clock-cells = <0>;
> - compatible = "ti,omap2430-interface-clock";
> - clocks = <&func_96m_ck>;
> - ti,bit-shift = <20>;
> - reg = <0x0204>;
> - };
> -
> - usbhs_ick: usbhs_ick@214 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&core_l3_ck>;
> - ti,bit-shift = <6>;
> - reg = <0x0214>;
> - };
> -
> - mmchs1_ick: mmchs1_ick@214 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <7>;
> - reg = <0x0214>;
> - };
> -
> - mmchs1_fck: mmchs1_fck@204 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_96m_ck>;
> - ti,bit-shift = <7>;
> - reg = <0x0204>;
> - };
> -
> - mmchs2_ick: mmchs2_ick@214 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <8>;
> - reg = <0x0214>;
> - };
> -
> - mmchs2_fck: mmchs2_fck@204 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_96m_ck>;
> - ti,bit-shift = <8>;
> - reg = <0x0204>;
> - };
> -
> - gpio5_ick: gpio5_ick@214 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <10>;
> - reg = <0x0214>;
> - };
> -
> - gpio5_fck: gpio5_fck@204 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_32k_ck>;
> - ti,bit-shift = <10>;
> - reg = <0x0204>;
> - };
> -
> - mdm_intc_ick: mdm_intc_ick@214 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <11>;
> - reg = <0x0214>;
> - };
> -
> - mmchsdb1_fck: mmchsdb1_fck@204 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_32k_ck>;
> - ti,bit-shift = <16>;
> - reg = <0x0204>;
> - };
> -
> - mmchsdb2_fck: mmchsdb2_fck@204 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_32k_ck>;
> - ti,bit-shift = <17>;
> - reg = <0x0204>;
> - };
> -};
> -
> -&prcm_clockdomains {
> - gfx_clkdm: gfx_clkdm {
> - compatible = "ti,clockdomain";
> - clocks = <&gfx_ick>;
> - };
> -
> - core_l3_clkdm: core_l3_clkdm {
> - compatible = "ti,clockdomain";
> - clocks = <&cam_fck>, <&usb_fck>, <&usbhs_ick>;
> - };
> -
> - wkup_clkdm: wkup_clkdm {
> - compatible = "ti,clockdomain";
> - clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
> - <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
> - <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>,
> - <&icr_ick>;
> - };
> -
> - dss_clkdm: dss_clkdm {
> - compatible = "ti,clockdomain";
> - clocks = <&dss_ick>, <&dss_54m_fck>;
> - };
> -
> - core_l4_clkdm: core_l4_clkdm {
> - compatible = "ti,clockdomain";
> - clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
> - <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
> - <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
> - <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
> - <&mcbsp4_ick>, <&mcbsp5_ick>, <&mcspi1_ick>,
> - <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
> - <&mcspi3_ick>, <&mcspi3_fck>, <&uart1_ick>,
> - <&uart1_fck>, <&uart2_ick>, <&uart2_fck>, <&uart3_ick>,
> - <&uart3_fck>, <&cam_ick>, <&mailboxes_ick>,
> - <&wdt4_ick>, <&wdt4_fck>, <&mspro_ick>, <&mspro_fck>,
> - <&fac_ick>, <&fac_fck>, <&hdq_ick>, <&hdq_fck>,
> - <&i2c1_ick>, <&i2chs1_fck>, <&i2c2_ick>, <&i2chs2_fck>,
> - <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
> - <&pka_ick>, <&mmchs1_ick>, <&mmchs1_fck>,
> - <&mmchs2_ick>, <&mmchs2_fck>, <&gpio5_ick>,
> - <&gpio5_fck>, <&mdm_intc_ick>, <&mmchsdb1_fck>,
> - <&mmchsdb2_fck>;
> - };
> -
> - mdm_clkdm: mdm_clkdm {
> - compatible = "ti,clockdomain";
> - clocks = <&mdm_osc_ck>;
> - };
> -};
> -
> -&func_96m_ck {
> - compatible = "ti,mux-clock";
> - clocks = <&apll96_ck>, <&alt_ck>;
> - ti,bit-shift = <4>;
> - reg = <0x0540>;
> -};
> -
> -&dsp_div_fck {
> - ti,max-div = <4>;
> - ti,index-starts-at-one;
> -};
> -
> -&ssi_ssr_sst_div_fck {
> - ti,max-div = <5>;
> - ti,index-starts-at-one;
> -};
> diff --git a/arch/arm/boot/dts/ti/omap/omap2430-sdp.dts b/arch/arm/boot/dts/ti/omap/omap2430-sdp.dts
> deleted file mode 100644
> index 207070677e3a..000000000000
> --- a/arch/arm/boot/dts/ti/omap/omap2430-sdp.dts
> +++ /dev/null
> @@ -1,70 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
> - */
> -/dts-v1/;
> -
> -#include "omap2430.dtsi"
> -
> -/ {
> - model = "TI OMAP2430 SDP";
> - compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2";
> -
> - memory@80000000 {
> - device_type = "memory";
> - reg = <0x80000000 0x8000000>; /* 128 MB */
> - };
> -};
> -
> -&i2c2 {
> - clock-frequency = <100000>;
> -
> - twl: twl@48 {
> - reg = <0x48>;
> - interrupts = <7>; /* SYS_NIRQ cascaded to intc */
> - };
> -};
> -
> -#include "twl4030.dtsi"
> -
> -&mmc1 {
> - vmmc-supply = <&vmmc1>;
> - bus-width = <4>;
> -};
> -
> -&gpmc {
> - ranges = <5 0 0x08000000 0x01000000>;
> - ethernet@gpmc {
> - compatible = "smsc,lan91c94";
> - interrupt-parent = <&gpio5>;
> - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; /* gpio149 */
> - reg = <5 0x300 0xf>;
> - bank-width = <2>;
> - gpmc,sync-clk-ps = <0>;
> - gpmc,mux-add-data = <2>;
> - gpmc,device-width = <1>;
> - gpmc,cycle2cycle-samecsen;
> - gpmc,cycle2cycle-diffcsen;
> - gpmc,cs-on-ns = <6>;
> - gpmc,cs-rd-off-ns = <187>;
> - gpmc,cs-wr-off-ns = <187>;
> - gpmc,adv-on-ns = <18>;
> - gpmc,adv-rd-off-ns = <48>;
> - gpmc,adv-wr-off-ns = <48>;
> - gpmc,oe-on-ns = <60>;
> - gpmc,oe-off-ns = <169>;
> - gpmc,we-on-ns = <66>;
> - gpmc,we-off-ns = <169>;
> - gpmc,rd-cycle-ns = <187>;
> - gpmc,wr-cycle-ns = <187>;
> - gpmc,access-ns = <187>;
> - gpmc,page-burst-access-ns = <24>;
> - gpmc,bus-turnaround-ns = <24>;
> - gpmc,cycle2cycle-delay-ns = <24>;
> - gpmc,wait-monitoring-ns = <0>;
> - gpmc,clk-activation-ns = <0>;
> - gpmc,wr-data-mux-bus-ns = <0>;
> - gpmc,wr-access-ns = <0>;
> - };
> -};
> -
> diff --git a/arch/arm/boot/dts/ti/omap/omap2430.dtsi b/arch/arm/boot/dts/ti/omap/omap2430.dtsi
> deleted file mode 100644
> index 01bd471f9223..000000000000
> --- a/arch/arm/boot/dts/ti/omap/omap2430.dtsi
> +++ /dev/null
> @@ -1,366 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * Device Tree Source for OMAP243x SoC
> - *
> - * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
> - */
> -
> -#include "omap2.dtsi"
> -
> -/ {
> - compatible = "ti,omap2430", "ti,omap2";
> -
> - ocp {
> - l4_wkup: l4_wkup@49000000 {
> - compatible = "ti,omap2-l4-wkup", "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0x49000000 0x31000>;
> -
> - prcm: prcm@6000 {
> - compatible = "ti,omap2-prcm";
> - reg = <0x6000 0x1000>;
> -
> - prcm_clocks: clocks {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> -
> - prcm_clockdomains: clockdomains {
> - };
> - };
> -
> - scm: scm@2000 {
> - compatible = "ti,omap2-scm", "simple-bus";
> - reg = <0x2000 0x1000>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - #pinctrl-cells = <1>;
> - ranges = <0 0x2000 0x1000>;
> -
> - omap2430_pmx: pinmux@30 {
> - compatible = "ti,omap2430-padconf",
> - "pinctrl-single";
> - reg = <0x30 0x0154>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - #pinctrl-cells = <1>;
> - pinctrl-single,register-width = <8>;
> - pinctrl-single,function-mask = <0x3f>;
> - };
> -
> - scm_conf: scm_conf@270 {
> - compatible = "ti,omap2-scm-conf", "syscon",
> - "simple-bus";
> - reg = <0x270 0x240>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0x270 0x240>;
> -
> - scm_clocks: clocks {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> -
> - pbias_regulator: pbias_regulator@230 {
> - compatible = "ti,pbias-omap2", "ti,pbias-omap";
> - reg = <0x230 0x4>;
> - syscon = <&scm_conf>;
> - pbias_mmc_reg: pbias_mmc_omap2430 {
> - regulator-name = "pbias_mmc_omap2430";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3000000>;
> - };
> - };
> - };
> -
> - scm_clockdomains: clockdomains {
> - };
> - };
> -
> - target-module@20000 {
> - compatible = "ti,sysc-omap2", "ti,sysc";
> - reg = <0x20000 0x4>,
> - <0x20004 0x4>;
> - reg-names = "rev", "sysc";
> - ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> - <SYSC_IDLE_NO>;
> - clocks = <&func_32k_ck>;
> - clock-names = "fck";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0x0 0x20000 0x1000>;
> -
> - counter32k: counter@0 {
> - compatible = "ti,omap-counter32k";
> - reg = <0 0x20>;
> - };
> - };
> - };
> -
> - gpio1: gpio@4900c000 {
> - compatible = "ti,omap2-gpio";
> - reg = <0x4900c000 0x200>;
> - interrupts = <29>;
> - ti,hwmods = "gpio1";
> - ti,gpio-always-on;
> - #gpio-cells = <2>;
> - gpio-controller;
> - #interrupt-cells = <2>;
> - interrupt-controller;
> - };
> -
> - gpio2: gpio@4900e000 {
> - compatible = "ti,omap2-gpio";
> - reg = <0x4900e000 0x200>;
> - interrupts = <30>;
> - ti,hwmods = "gpio2";
> - ti,gpio-always-on;
> - #gpio-cells = <2>;
> - gpio-controller;
> - #interrupt-cells = <2>;
> - interrupt-controller;
> - };
> -
> - gpio3: gpio@49010000 {
> - compatible = "ti,omap2-gpio";
> - reg = <0x49010000 0x200>;
> - interrupts = <31>;
> - ti,hwmods = "gpio3";
> - ti,gpio-always-on;
> - #gpio-cells = <2>;
> - gpio-controller;
> - #interrupt-cells = <2>;
> - interrupt-controller;
> - };
> -
> - gpio4: gpio@49012000 {
> - compatible = "ti,omap2-gpio";
> - reg = <0x49012000 0x200>;
> - interrupts = <32>;
> - ti,hwmods = "gpio4";
> - ti,gpio-always-on;
> - #gpio-cells = <2>;
> - gpio-controller;
> - #interrupt-cells = <2>;
> - interrupt-controller;
> - };
> -
> - gpio5: gpio@480b6000 {
> - compatible = "ti,omap2-gpio";
> - reg = <0x480b6000 0x200>;
> - interrupts = <33>;
> - ti,hwmods = "gpio5";
> - #gpio-cells = <2>;
> - gpio-controller;
> - #interrupt-cells = <2>;
> - interrupt-controller;
> - };
> -
> - gpmc: gpmc@6e000000 {
> - compatible = "ti,omap2430-gpmc";
> - reg = <0x6e000000 0x1000>;
> - #address-cells = <2>;
> - #size-cells = <1>;
> - interrupts = <20>;
> - gpmc,num-cs = <8>;
> - gpmc,num-waitpins = <4>;
> - ti,hwmods = "gpmc";
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> - mcbsp1: mcbsp@48074000 {
> - compatible = "ti,omap2430-mcbsp";
> - reg = <0x48074000 0xff>;
> - reg-names = "mpu";
> - interrupts = <64>, /* OCP compliant interrupt */
> - <59>, /* TX interrupt */
> - <60>, /* RX interrupt */
> - <61>; /* RX overflow interrupt */
> - interrupt-names = "common", "tx", "rx", "rx_overflow";
> - ti,buffer-size = <128>;
> - ti,hwmods = "mcbsp1";
> - dmas = <&sdma 31>,
> - <&sdma 32>;
> - dma-names = "tx", "rx";
> - status = "disabled";
> - };
> -
> - mcbsp2: mcbsp@48076000 {
> - compatible = "ti,omap2430-mcbsp";
> - reg = <0x48076000 0xff>;
> - reg-names = "mpu";
> - interrupts = <16>, /* OCP compliant interrupt */
> - <62>, /* TX interrupt */
> - <63>; /* RX interrupt */
> - interrupt-names = "common", "tx", "rx";
> - ti,buffer-size = <128>;
> - ti,hwmods = "mcbsp2";
> - dmas = <&sdma 33>,
> - <&sdma 34>;
> - dma-names = "tx", "rx";
> - status = "disabled";
> - };
> -
> - mcbsp3: mcbsp@4808c000 {
> - compatible = "ti,omap2430-mcbsp";
> - reg = <0x4808c000 0xff>;
> - reg-names = "mpu";
> - interrupts = <17>, /* OCP compliant interrupt */
> - <89>, /* TX interrupt */
> - <90>; /* RX interrupt */
> - interrupt-names = "common", "tx", "rx";
> - ti,buffer-size = <128>;
> - ti,hwmods = "mcbsp3";
> - dmas = <&sdma 17>,
> - <&sdma 18>;
> - dma-names = "tx", "rx";
> - status = "disabled";
> - };
> -
> - mcbsp4: mcbsp@4808e000 {
> - compatible = "ti,omap2430-mcbsp";
> - reg = <0x4808e000 0xff>;
> - reg-names = "mpu";
> - interrupts = <18>, /* OCP compliant interrupt */
> - <54>, /* TX interrupt */
> - <55>; /* RX interrupt */
> - interrupt-names = "common", "tx", "rx";
> - ti,buffer-size = <128>;
> - ti,hwmods = "mcbsp4";
> - dmas = <&sdma 19>,
> - <&sdma 20>;
> - dma-names = "tx", "rx";
> - status = "disabled";
> - };
> -
> - mcbsp5: mcbsp@48096000 {
> - compatible = "ti,omap2430-mcbsp";
> - reg = <0x48096000 0xff>;
> - reg-names = "mpu";
> - interrupts = <19>, /* OCP compliant interrupt */
> - <81>, /* TX interrupt */
> - <82>; /* RX interrupt */
> - interrupt-names = "common", "tx", "rx";
> - ti,buffer-size = <128>;
> - ti,hwmods = "mcbsp5";
> - dmas = <&sdma 21>,
> - <&sdma 22>;
> - dma-names = "tx", "rx";
> - status = "disabled";
> - };
> -
> - mmc1: mmc@4809c000 {
> - compatible = "ti,omap2-hsmmc";
> - reg = <0x4809c000 0x200>;
> - interrupts = <83>;
> - ti,hwmods = "mmc1";
> - ti,dual-volt;
> - dmas = <&sdma 61>, <&sdma 62>;
> - dma-names = "tx", "rx";
> - pbias-supply = <&pbias_mmc_reg>;
> - };
> -
> - mmc2: mmc@480b4000 {
> - compatible = "ti,omap2-hsmmc";
> - reg = <0x480b4000 0x200>;
> - interrupts = <86>;
> - ti,hwmods = "mmc2";
> - dmas = <&sdma 47>, <&sdma 48>;
> - dma-names = "tx", "rx";
> - };
> -
> - mailbox: mailbox@48094000 {
> - compatible = "ti,omap2-mailbox";
> - reg = <0x48094000 0x200>;
> - interrupts = <26>;
> - ti,hwmods = "mailbox";
> - #mbox-cells = <1>;
> - ti,mbox-num-users = <4>;
> - ti,mbox-num-fifos = <6>;
> - mbox_dsp: mbox-dsp {
> - ti,mbox-tx = <0 0 0>;
> - ti,mbox-rx = <1 0 0>;
> - };
> - };
> -
> - timer1_target: target-module@49018000 {
> - compatible = "ti,sysc-omap2-timer", "ti,sysc";
> - reg = <0x49018000 0x4>,
> - <0x49018010 0x4>,
> - <0x49018014 0x4>;
> - reg-names = "rev", "sysc", "syss";
> - ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
> - SYSC_OMAP2_EMUFREE |
> - SYSC_OMAP2_ENAWAKEUP |
> - SYSC_OMAP2_SOFTRESET |
> - SYSC_OMAP2_AUTOIDLE)>;
> - ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> - <SYSC_IDLE_NO>,
> - <SYSC_IDLE_SMART>;
> - ti,syss-mask = <1>;
> - clocks = <&gpt1_fck>, <&gpt1_ick>;
> - clock-names = "fck", "ick";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0x0 0x49018000 0x1000>;
> -
> - timer1: timer@0 {
> - compatible = "ti,omap2420-timer";
> - reg = <0 0x400>;
> - interrupts = <37>;
> - ti,timer-alwon;
> - };
> - };
> -
> - mcspi3: spi@480b8000 {
> - compatible = "ti,omap2-mcspi";
> - ti,hwmods = "mcspi3";
> - reg = <0x480b8000 0x100>;
> - interrupts = <91>;
> - dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>;
> - dma-names = "tx0", "rx0", "tx1", "rx1";
> - };
> -
> - usb_otg_hs: usb_otg_hs@480ac000 {
> - compatible = "ti,omap2-musb";
> - ti,hwmods = "usb_otg_hs";
> - reg = <0x480ac000 0x1000>;
> - interrupts = <93>;
> - };
> -
> - wd_timer2: watchdog@49016000 {
> - compatible = "ti,omap2-wdt";
> - ti,hwmods = "wd_timer2";
> - reg = <0x49016000 0x80>;
> - };
> - };
> -};
> -
> -&sdma {
> - compatible = "ti,omap2430-sdma", "ti,omap-sdma";
> -};
> -
> -&i2c1 {
> - compatible = "ti,omap2430-i2c";
> -};
> -
> -&i2c2 {
> - compatible = "ti,omap2430-i2c";
> -};
> -
> -#include "omap24xx-clocks.dtsi"
> -#include "omap2430-clocks.dtsi"
> -
> -/* Preferred always-on timer for clockevent */
> -&timer1_target {
> - ti,no-reset-on-init;
> - ti,no-idle;
> - timer@0 {
> - assigned-clocks = <&gpt1_fck>;
> - assigned-clock-parents = <&func_32k_ck>;
> - };
> -};
> diff --git a/arch/arm/boot/dts/ti/omap/omap24xx-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap24xx-clocks.dtsi
> deleted file mode 100644
> index 07af87edf0e2..000000000000
> --- a/arch/arm/boot/dts/ti/omap/omap24xx-clocks.dtsi
> +++ /dev/null
> @@ -1,1241 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * Device Tree Source for OMAP24xx clock data
> - *
> - * Copyright (C) 2014 Texas Instruments, Inc.
> - */
> -&scm_clocks {
> - mcbsp1_mux_fck: mcbsp1_mux_fck@4 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&func_96m_ck>, <&mcbsp_clks>;
> - ti,bit-shift = <2>;
> - reg = <0x4>;
> - };
> -
> - mcbsp1_fck: mcbsp1_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
> - };
> -
> - mcbsp2_mux_fck: mcbsp2_mux_fck@4 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&func_96m_ck>, <&mcbsp_clks>;
> - ti,bit-shift = <6>;
> - reg = <0x4>;
> - };
> -
> - mcbsp2_fck: mcbsp2_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
> - };
> -};
> -
> -&prcm_clocks {
> - func_32k_ck: func_32k_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-clock";
> - clock-frequency = <32768>;
> - };
> -
> - secure_32k_ck: secure_32k_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-clock";
> - clock-frequency = <32768>;
> - };
> -
> - virt_12m_ck: virt_12m_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-clock";
> - clock-frequency = <12000000>;
> - };
> -
> - virt_13m_ck: virt_13m_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-clock";
> - clock-frequency = <13000000>;
> - };
> -
> - virt_19200000_ck: virt_19200000_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-clock";
> - clock-frequency = <19200000>;
> - };
> -
> - virt_26m_ck: virt_26m_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-clock";
> - clock-frequency = <26000000>;
> - };
> -
> - aplls_clkin_ck: aplls_clkin_ck@540 {
> - #clock-cells = <0>;
> - compatible = "ti,mux-clock";
> - clocks = <&virt_19200000_ck>, <&virt_26m_ck>, <&virt_13m_ck>, <&virt_12m_ck>;
> - ti,bit-shift = <23>;
> - reg = <0x0540>;
> - };
> -
> - aplls_clkin_x2_ck: aplls_clkin_x2_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-factor-clock";
> - clocks = <&aplls_clkin_ck>;
> - clock-mult = <2>;
> - clock-div = <1>;
> - };
> -
> - osc_ck: osc_ck@60 {
> - #clock-cells = <0>;
> - compatible = "ti,mux-clock";
> - clocks = <&aplls_clkin_ck>, <&aplls_clkin_x2_ck>;
> - ti,bit-shift = <6>;
> - reg = <0x0060>;
> - ti,index-starts-at-one;
> - };
> -
> - sys_ck: sys_ck@60 {
> - #clock-cells = <0>;
> - compatible = "ti,divider-clock";
> - clocks = <&osc_ck>;
> - ti,bit-shift = <6>;
> - ti,max-div = <3>;
> - reg = <0x0060>;
> - ti,index-starts-at-one;
> - };
> -
> - alt_ck: alt_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-clock";
> - clock-frequency = <54000000>;
> - };
> -
> - mcbsp_clks: mcbsp_clks {
> - #clock-cells = <0>;
> - compatible = "fixed-clock";
> - clock-frequency = <0x0>;
> - };
> -
> - dpll_ck: dpll_ck@500 {
> - #clock-cells = <0>;
> - compatible = "ti,omap2-dpll-core-clock";
> - clocks = <&sys_ck>, <&sys_ck>;
> - reg = <0x0500>, <0x0540>;
> - };
> -
> - apll96_ck: apll96_ck@500 {
> - #clock-cells = <0>;
> - compatible = "ti,omap2-apll-clock";
> - clocks = <&sys_ck>;
> - ti,bit-shift = <2>;
> - ti,idlest-shift = <8>;
> - ti,clock-frequency = <96000000>;
> - reg = <0x0500>, <0x0530>, <0x0520>;
> - };
> -
> - apll54_ck: apll54_ck@500 {
> - #clock-cells = <0>;
> - compatible = "ti,omap2-apll-clock";
> - clocks = <&sys_ck>;
> - ti,bit-shift = <6>;
> - ti,idlest-shift = <9>;
> - ti,clock-frequency = <54000000>;
> - reg = <0x0500>, <0x0530>, <0x0520>;
> - };
> -
> - func_54m_ck: func_54m_ck@540 {
> - #clock-cells = <0>;
> - compatible = "ti,mux-clock";
> - clocks = <&apll54_ck>, <&alt_ck>;
> - ti,bit-shift = <5>;
> - reg = <0x0540>;
> - };
> -
> - core_ck: core_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-factor-clock";
> - clocks = <&dpll_ck>;
> - clock-mult = <1>;
> - clock-div = <1>;
> - };
> -
> - func_96m_ck: func_96m_ck@540 {
> - #clock-cells = <0>;
> - };
> -
> - apll96_d2_ck: apll96_d2_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-factor-clock";
> - clocks = <&apll96_ck>;
> - clock-mult = <1>;
> - clock-div = <2>;
> - };
> -
> - func_48m_ck: func_48m_ck@540 {
> - #clock-cells = <0>;
> - compatible = "ti,mux-clock";
> - clocks = <&apll96_d2_ck>, <&alt_ck>;
> - ti,bit-shift = <3>;
> - reg = <0x0540>;
> - };
> -
> - func_12m_ck: func_12m_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-factor-clock";
> - clocks = <&func_48m_ck>;
> - clock-mult = <1>;
> - clock-div = <4>;
> - };
> -
> - sys_clkout_src_gate: sys_clkout_src_gate@70 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-no-wait-gate-clock";
> - clocks = <&core_ck>;
> - ti,bit-shift = <7>;
> - reg = <0x0070>;
> - };
> -
> - sys_clkout_src_mux: sys_clkout_src_mux@70 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
> - reg = <0x0070>;
> - };
> -
> - sys_clkout_src: sys_clkout_src {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&sys_clkout_src_gate>, <&sys_clkout_src_mux>;
> - };
> -
> - sys_clkout: sys_clkout@70 {
> - #clock-cells = <0>;
> - compatible = "ti,divider-clock";
> - clocks = <&sys_clkout_src>;
> - ti,bit-shift = <3>;
> - ti,max-div = <64>;
> - reg = <0x0070>;
> - ti,index-power-of-two;
> - };
> -
> - emul_ck: emul_ck@78 {
> - #clock-cells = <0>;
> - compatible = "ti,gate-clock";
> - clocks = <&func_54m_ck>;
> - ti,bit-shift = <0>;
> - reg = <0x0078>;
> - };
> -
> - mpu_ck: mpu_ck@140 {
> - #clock-cells = <0>;
> - compatible = "ti,divider-clock";
> - clocks = <&core_ck>;
> - ti,max-div = <31>;
> - reg = <0x0140>;
> - ti,index-starts-at-one;
> - };
> -
> - dsp_gate_fck: dsp_gate_fck@800 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&core_ck>;
> - ti,bit-shift = <0>;
> - reg = <0x0800>;
> - };
> -
> - dsp_div_fck: dsp_div_fck@840 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-divider-clock";
> - clocks = <&core_ck>;
> - reg = <0x0840>;
> - };
> -
> - dsp_fck: dsp_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&dsp_gate_fck>, <&dsp_div_fck>;
> - };
> -
> - core_l3_ck: core_l3_ck@240 {
> - #clock-cells = <0>;
> - compatible = "ti,divider-clock";
> - clocks = <&core_ck>;
> - ti,max-div = <31>;
> - reg = <0x0240>;
> - ti,index-starts-at-one;
> - };
> -
> - gfx_3d_gate_fck: gfx_3d_gate_fck@300 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&core_l3_ck>;
> - ti,bit-shift = <2>;
> - reg = <0x0300>;
> - };
> -
> - gfx_3d_div_fck: gfx_3d_div_fck@340 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-divider-clock";
> - clocks = <&core_l3_ck>;
> - ti,max-div = <4>;
> - reg = <0x0340>;
> - ti,index-starts-at-one;
> - };
> -
> - gfx_3d_fck: gfx_3d_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&gfx_3d_gate_fck>, <&gfx_3d_div_fck>;
> - };
> -
> - gfx_2d_gate_fck: gfx_2d_gate_fck@300 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&core_l3_ck>;
> - ti,bit-shift = <1>;
> - reg = <0x0300>;
> - };
> -
> - gfx_2d_div_fck: gfx_2d_div_fck@340 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-divider-clock";
> - clocks = <&core_l3_ck>;
> - ti,max-div = <4>;
> - reg = <0x0340>;
> - ti,index-starts-at-one;
> - };
> -
> - gfx_2d_fck: gfx_2d_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&gfx_2d_gate_fck>, <&gfx_2d_div_fck>;
> - };
> -
> - gfx_ick: gfx_ick@310 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&core_l3_ck>;
> - ti,bit-shift = <0>;
> - reg = <0x0310>;
> - };
> -
> - l4_ck: l4_ck@240 {
> - #clock-cells = <0>;
> - compatible = "ti,divider-clock";
> - clocks = <&core_l3_ck>;
> - ti,bit-shift = <5>;
> - ti,max-div = <3>;
> - reg = <0x0240>;
> - ti,index-starts-at-one;
> - };
> -
> - dss_ick: dss_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-no-wait-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <0>;
> - reg = <0x0210>;
> - };
> -
> - dss1_gate_fck: dss1_gate_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-no-wait-gate-clock";
> - clocks = <&core_ck>;
> - ti,bit-shift = <0>;
> - reg = <0x0200>;
> - };
> -
> - core_d2_ck: core_d2_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-factor-clock";
> - clocks = <&core_ck>;
> - clock-mult = <1>;
> - clock-div = <2>;
> - };
> -
> - core_d3_ck: core_d3_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-factor-clock";
> - clocks = <&core_ck>;
> - clock-mult = <1>;
> - clock-div = <3>;
> - };
> -
> - core_d4_ck: core_d4_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-factor-clock";
> - clocks = <&core_ck>;
> - clock-mult = <1>;
> - clock-div = <4>;
> - };
> -
> - core_d5_ck: core_d5_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-factor-clock";
> - clocks = <&core_ck>;
> - clock-mult = <1>;
> - clock-div = <5>;
> - };
> -
> - core_d6_ck: core_d6_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-factor-clock";
> - clocks = <&core_ck>;
> - clock-mult = <1>;
> - clock-div = <6>;
> - };
> -
> - dummy_ck: dummy_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-clock";
> - clock-frequency = <0>;
> - };
> -
> - core_d8_ck: core_d8_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-factor-clock";
> - clocks = <&core_ck>;
> - clock-mult = <1>;
> - clock-div = <8>;
> - };
> -
> - core_d9_ck: core_d9_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-factor-clock";
> - clocks = <&core_ck>;
> - clock-mult = <1>;
> - clock-div = <9>;
> - };
> -
> - core_d12_ck: core_d12_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-factor-clock";
> - clocks = <&core_ck>;
> - clock-mult = <1>;
> - clock-div = <12>;
> - };
> -
> - core_d16_ck: core_d16_ck {
> - #clock-cells = <0>;
> - compatible = "fixed-factor-clock";
> - clocks = <&core_ck>;
> - clock-mult = <1>;
> - clock-div = <16>;
> - };
> -
> - dss1_mux_fck: dss1_mux_fck@240 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&sys_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&core_d5_ck>, <&core_d6_ck>, <&core_d8_ck>, <&core_d9_ck>, <&core_d12_ck>, <&core_d16_ck>;
> - ti,bit-shift = <8>;
> - reg = <0x0240>;
> - };
> -
> - dss1_fck: dss1_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&dss1_gate_fck>, <&dss1_mux_fck>;
> - };
> -
> - dss2_gate_fck: dss2_gate_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-no-wait-gate-clock";
> - clocks = <&func_48m_ck>;
> - ti,bit-shift = <1>;
> - reg = <0x0200>;
> - };
> -
> - dss2_mux_fck: dss2_mux_fck@240 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&sys_ck>, <&func_48m_ck>;
> - ti,bit-shift = <13>;
> - reg = <0x0240>;
> - };
> -
> - dss2_fck: dss2_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&dss2_gate_fck>, <&dss2_mux_fck>;
> - };
> -
> - dss_54m_fck: dss_54m_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_54m_ck>;
> - ti,bit-shift = <2>;
> - reg = <0x0200>;
> - };
> -
> - ssi_ssr_sst_gate_fck: ssi_ssr_sst_gate_fck@204 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&core_ck>;
> - ti,bit-shift = <1>;
> - reg = <0x0204>;
> - };
> -
> - ssi_ssr_sst_div_fck: ssi_ssr_sst_div_fck@240 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-divider-clock";
> - clocks = <&core_ck>;
> - ti,bit-shift = <20>;
> - reg = <0x0240>;
> - };
> -
> - ssi_ssr_sst_fck: ssi_ssr_sst_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&ssi_ssr_sst_gate_fck>, <&ssi_ssr_sst_div_fck>;
> - };
> -
> - usb_l4_gate_ick: usb_l4_gate_ick@214 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-interface-clock";
> - clocks = <&core_l3_ck>;
> - ti,bit-shift = <0>;
> - reg = <0x0214>;
> - };
> -
> - usb_l4_div_ick: usb_l4_div_ick@240 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-divider-clock";
> - clocks = <&core_l3_ck>;
> - ti,bit-shift = <25>;
> - reg = <0x0240>;
> - ti,dividers = <0>, <1>, <2>, <0>, <4>;
> - };
> -
> - usb_l4_ick: usb_l4_ick {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
> - };
> -
> - ssi_l4_ick: ssi_l4_ick@214 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <1>;
> - reg = <0x0214>;
> - };
> -
> - gpt1_ick: gpt1_ick@410 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&sys_ck>;
> - ti,bit-shift = <0>;
> - reg = <0x0410>;
> - };
> -
> - gpt1_gate_fck: gpt1_gate_fck@400 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&func_32k_ck>;
> - ti,bit-shift = <0>;
> - reg = <0x0400>;
> - };
> -
> - gpt1_mux_fck: gpt1_mux_fck@440 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
> - reg = <0x0440>;
> - };
> -
> - gpt1_fck: gpt1_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
> - };
> -
> - gpt2_ick: gpt2_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <4>;
> - reg = <0x0210>;
> - };
> -
> - gpt2_gate_fck: gpt2_gate_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&func_32k_ck>;
> - ti,bit-shift = <4>;
> - reg = <0x0200>;
> - };
> -
> - gpt2_mux_fck: gpt2_mux_fck@244 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
> - ti,bit-shift = <2>;
> - reg = <0x0244>;
> - };
> -
> - gpt2_fck: gpt2_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
> - };
> -
> - gpt3_ick: gpt3_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <5>;
> - reg = <0x0210>;
> - };
> -
> - gpt3_gate_fck: gpt3_gate_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&func_32k_ck>;
> - ti,bit-shift = <5>;
> - reg = <0x0200>;
> - };
> -
> - gpt3_mux_fck: gpt3_mux_fck@244 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
> - ti,bit-shift = <4>;
> - reg = <0x0244>;
> - };
> -
> - gpt3_fck: gpt3_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
> - };
> -
> - gpt4_ick: gpt4_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <6>;
> - reg = <0x0210>;
> - };
> -
> - gpt4_gate_fck: gpt4_gate_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&func_32k_ck>;
> - ti,bit-shift = <6>;
> - reg = <0x0200>;
> - };
> -
> - gpt4_mux_fck: gpt4_mux_fck@244 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
> - ti,bit-shift = <6>;
> - reg = <0x0244>;
> - };
> -
> - gpt4_fck: gpt4_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
> - };
> -
> - gpt5_ick: gpt5_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <7>;
> - reg = <0x0210>;
> - };
> -
> - gpt5_gate_fck: gpt5_gate_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&func_32k_ck>;
> - ti,bit-shift = <7>;
> - reg = <0x0200>;
> - };
> -
> - gpt5_mux_fck: gpt5_mux_fck@244 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
> - ti,bit-shift = <8>;
> - reg = <0x0244>;
> - };
> -
> - gpt5_fck: gpt5_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
> - };
> -
> - gpt6_ick: gpt6_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <8>;
> - reg = <0x0210>;
> - };
> -
> - gpt6_gate_fck: gpt6_gate_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&func_32k_ck>;
> - ti,bit-shift = <8>;
> - reg = <0x0200>;
> - };
> -
> - gpt6_mux_fck: gpt6_mux_fck@244 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
> - ti,bit-shift = <10>;
> - reg = <0x0244>;
> - };
> -
> - gpt6_fck: gpt6_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
> - };
> -
> - gpt7_ick: gpt7_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <9>;
> - reg = <0x0210>;
> - };
> -
> - gpt7_gate_fck: gpt7_gate_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&func_32k_ck>;
> - ti,bit-shift = <9>;
> - reg = <0x0200>;
> - };
> -
> - gpt7_mux_fck: gpt7_mux_fck@244 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
> - ti,bit-shift = <12>;
> - reg = <0x0244>;
> - };
> -
> - gpt7_fck: gpt7_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
> - };
> -
> - gpt8_ick: gpt8_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <10>;
> - reg = <0x0210>;
> - };
> -
> - gpt8_gate_fck: gpt8_gate_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&func_32k_ck>;
> - ti,bit-shift = <10>;
> - reg = <0x0200>;
> - };
> -
> - gpt8_mux_fck: gpt8_mux_fck@244 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
> - ti,bit-shift = <14>;
> - reg = <0x0244>;
> - };
> -
> - gpt8_fck: gpt8_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
> - };
> -
> - gpt9_ick: gpt9_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <11>;
> - reg = <0x0210>;
> - };
> -
> - gpt9_gate_fck: gpt9_gate_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&func_32k_ck>;
> - ti,bit-shift = <11>;
> - reg = <0x0200>;
> - };
> -
> - gpt9_mux_fck: gpt9_mux_fck@244 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
> - ti,bit-shift = <16>;
> - reg = <0x0244>;
> - };
> -
> - gpt9_fck: gpt9_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
> - };
> -
> - gpt10_ick: gpt10_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <12>;
> - reg = <0x0210>;
> - };
> -
> - gpt10_gate_fck: gpt10_gate_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&func_32k_ck>;
> - ti,bit-shift = <12>;
> - reg = <0x0200>;
> - };
> -
> - gpt10_mux_fck: gpt10_mux_fck@244 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
> - ti,bit-shift = <18>;
> - reg = <0x0244>;
> - };
> -
> - gpt10_fck: gpt10_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
> - };
> -
> - gpt11_ick: gpt11_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <13>;
> - reg = <0x0210>;
> - };
> -
> - gpt11_gate_fck: gpt11_gate_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&func_32k_ck>;
> - ti,bit-shift = <13>;
> - reg = <0x0200>;
> - };
> -
> - gpt11_mux_fck: gpt11_mux_fck@244 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
> - ti,bit-shift = <20>;
> - reg = <0x0244>;
> - };
> -
> - gpt11_fck: gpt11_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
> - };
> -
> - gpt12_ick: gpt12_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <14>;
> - reg = <0x0210>;
> - };
> -
> - gpt12_gate_fck: gpt12_gate_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&func_32k_ck>;
> - ti,bit-shift = <14>;
> - reg = <0x0200>;
> - };
> -
> - gpt12_mux_fck: gpt12_mux_fck@244 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-mux-clock";
> - clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
> - ti,bit-shift = <22>;
> - reg = <0x0244>;
> - };
> -
> - gpt12_fck: gpt12_fck {
> - #clock-cells = <0>;
> - compatible = "ti,composite-clock";
> - clocks = <&gpt12_gate_fck>, <&gpt12_mux_fck>;
> - };
> -
> - mcbsp1_ick: mcbsp1_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <15>;
> - reg = <0x0210>;
> - };
> -
> - mcbsp1_gate_fck: mcbsp1_gate_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&mcbsp_clks>;
> - ti,bit-shift = <15>;
> - reg = <0x0200>;
> - };
> -
> - mcbsp2_ick: mcbsp2_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <16>;
> - reg = <0x0210>;
> - };
> -
> - mcbsp2_gate_fck: mcbsp2_gate_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,composite-gate-clock";
> - clocks = <&mcbsp_clks>;
> - ti,bit-shift = <16>;
> - reg = <0x0200>;
> - };
> -
> - mcspi1_ick: mcspi1_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <17>;
> - reg = <0x0210>;
> - };
> -
> - mcspi1_fck: mcspi1_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_48m_ck>;
> - ti,bit-shift = <17>;
> - reg = <0x0200>;
> - };
> -
> - mcspi2_ick: mcspi2_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <18>;
> - reg = <0x0210>;
> - };
> -
> - mcspi2_fck: mcspi2_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_48m_ck>;
> - ti,bit-shift = <18>;
> - reg = <0x0200>;
> - };
> -
> - uart1_ick: uart1_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <21>;
> - reg = <0x0210>;
> - };
> -
> - uart1_fck: uart1_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_48m_ck>;
> - ti,bit-shift = <21>;
> - reg = <0x0200>;
> - };
> -
> - uart2_ick: uart2_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <22>;
> - reg = <0x0210>;
> - };
> -
> - uart2_fck: uart2_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_48m_ck>;
> - ti,bit-shift = <22>;
> - reg = <0x0200>;
> - };
> -
> - uart3_ick: uart3_ick@214 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <2>;
> - reg = <0x0214>;
> - };
> -
> - uart3_fck: uart3_fck@204 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_48m_ck>;
> - ti,bit-shift = <2>;
> - reg = <0x0204>;
> - };
> -
> - gpios_ick: gpios_ick@410 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&sys_ck>;
> - ti,bit-shift = <2>;
> - reg = <0x0410>;
> - };
> -
> - gpios_fck: gpios_fck@400 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_32k_ck>;
> - ti,bit-shift = <2>;
> - reg = <0x0400>;
> - };
> -
> - mpu_wdt_ick: mpu_wdt_ick@410 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&sys_ck>;
> - ti,bit-shift = <3>;
> - reg = <0x0410>;
> - };
> -
> - mpu_wdt_fck: mpu_wdt_fck@400 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_32k_ck>;
> - ti,bit-shift = <3>;
> - reg = <0x0400>;
> - };
> -
> - sync_32k_ick: sync_32k_ick@410 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&sys_ck>;
> - ti,bit-shift = <1>;
> - reg = <0x0410>;
> - };
> -
> - wdt1_ick: wdt1_ick@410 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&sys_ck>;
> - ti,bit-shift = <4>;
> - reg = <0x0410>;
> - };
> -
> - omapctrl_ick: omapctrl_ick@410 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&sys_ck>;
> - ti,bit-shift = <5>;
> - reg = <0x0410>;
> - };
> -
> - cam_fck: cam_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,gate-clock";
> - clocks = <&func_96m_ck>;
> - ti,bit-shift = <31>;
> - reg = <0x0200>;
> - };
> -
> - cam_ick: cam_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-no-wait-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <31>;
> - reg = <0x0210>;
> - };
> -
> - mailboxes_ick: mailboxes_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <30>;
> - reg = <0x0210>;
> - };
> -
> - wdt4_ick: wdt4_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <29>;
> - reg = <0x0210>;
> - };
> -
> - wdt4_fck: wdt4_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_32k_ck>;
> - ti,bit-shift = <29>;
> - reg = <0x0200>;
> - };
> -
> - mspro_ick: mspro_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <27>;
> - reg = <0x0210>;
> - };
> -
> - mspro_fck: mspro_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_96m_ck>;
> - ti,bit-shift = <27>;
> - reg = <0x0200>;
> - };
> -
> - fac_ick: fac_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <25>;
> - reg = <0x0210>;
> - };
> -
> - fac_fck: fac_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_12m_ck>;
> - ti,bit-shift = <25>;
> - reg = <0x0200>;
> - };
> -
> - hdq_ick: hdq_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <23>;
> - reg = <0x0210>;
> - };
> -
> - hdq_fck: hdq_fck@200 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_12m_ck>;
> - ti,bit-shift = <23>;
> - reg = <0x0200>;
> - };
> -
> - i2c1_ick: i2c1_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <19>;
> - reg = <0x0210>;
> - };
> -
> - i2c2_ick: i2c2_ick@210 {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <20>;
> - reg = <0x0210>;
> - };
> -
> - gpmc_fck: gpmc_fck@238 {
> - #clock-cells = <0>;
> - compatible = "ti,fixed-factor-clock";
> - clocks = <&core_l3_ck>;
> - ti,clock-div = <1>;
> - ti,autoidle-shift = <1>;
> - reg = <0x0238>;
> - ti,clock-mult = <1>;
> - };
> -
> - sdma_fck: sdma_fck {
> - #clock-cells = <0>;
> - compatible = "fixed-factor-clock";
> - clocks = <&core_l3_ck>;
> - clock-mult = <1>;
> - clock-div = <1>;
> - };
> -
> - sdma_ick: sdma_ick@238 {
> - #clock-cells = <0>;
> - compatible = "ti,fixed-factor-clock";
> - clocks = <&core_l3_ck>;
> - ti,clock-div = <1>;
> - ti,autoidle-shift = <0>;
> - reg = <0x0238>;
> - ti,clock-mult = <1>;
> - };
> -
> - sdrc_ick: sdrc_ick@238 {
> - #clock-cells = <0>;
> - compatible = "ti,fixed-factor-clock";
> - clocks = <&core_l3_ck>;
> - ti,clock-div = <1>;
> - ti,autoidle-shift = <2>;
> - reg = <0x0238>;
> - ti,clock-mult = <1>;
> - };
> -
> - des_ick: des_ick@21c {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <0>;
> - reg = <0x021c>;
> - };
> -
> - sha_ick: sha_ick@21c {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <1>;
> - reg = <0x021c>;
> - };
> -
> - rng_ick: rng_ick@21c {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <2>;
> - reg = <0x021c>;
> - };
> -
> - aes_ick: aes_ick@21c {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <3>;
> - reg = <0x021c>;
> - };
> -
> - pka_ick: pka_ick@21c {
> - #clock-cells = <0>;
> - compatible = "ti,omap3-interface-clock";
> - clocks = <&l4_ck>;
> - ti,bit-shift = <4>;
> - reg = <0x021c>;
> - };
> -
> - usb_fck: usb_fck@204 {
> - #clock-cells = <0>;
> - compatible = "ti,wait-gate-clock";
> - clocks = <&func_48m_ck>;
> - ti,bit-shift = <0>;
> - reg = <0x0204>;
> - };
> -};
> diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
> index f827f89567fd..2e9597f50c58 100644
> --- a/arch/arm/configs/omap2plus_defconfig
> +++ b/arch/arm/configs/omap2plus_defconfig
> @@ -22,9 +22,7 @@ CONFIG_NAMESPACES=y
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_EXPERT=y
> CONFIG_PROFILING=y
> -CONFIG_ARCH_MULTI_V6=y
> CONFIG_OMAP_RESET_CLOCKS=y
> -CONFIG_ARCH_OMAP2=y
> CONFIG_ARCH_OMAP3=y
> CONFIG_ARCH_OMAP4=y
> CONFIG_SOC_OMAP5=y
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 79f8afe3a6bf..37ecbfc0a19f 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -5,15 +5,6 @@ menu "TI OMAP/AM/DM/DRA Family"
> config OMAP_HWMOD
> bool
>
> -config ARCH_OMAP2
> - bool "TI OMAP2"
> - depends on ARCH_MULTI_V6
> - depends on !SMP
> - select ARCH_OMAP2PLUS
> - select CPU_ARM1136R0
> - select OMAP_HWMOD
> - select SOC_HAS_OMAP2_SDRC
> -
> config ARCH_OMAP3
> bool "TI OMAP3"
> depends on ARCH_MULTI_V7
> @@ -118,7 +109,7 @@ config ARCH_OMAP2PLUS
> select OMAP_IRQCHIP
> select CLKSRC_TI_32K
> help
> - Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
> + Systems based on OMAP3, OMAP4 or OMAP5
>
> config OMAP_INTERCONNECT_BARRIER
> bool
> @@ -129,7 +120,7 @@ config ARCH_OMAP
>
> if ARCH_OMAP2PLUS
>
> -menu "TI OMAP2/3/4 Specific Features"
> +menu "TI OMAP3/4 Specific Features"
>
> config ARCH_OMAP2PLUS_TYPICAL
> bool "Typical OMAP configuration"
> @@ -138,8 +129,7 @@ config ARCH_OMAP2PLUS_TYPICAL
> select HIGHMEM
> select I2C
> select I2C_OMAP
> - select MENELAUS if ARCH_OMAP2
> - select NEON if CPU_V7
> + select NEON
> select REGULATOR
> select REGULATOR_FIXED_VOLTAGE
> select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
> @@ -204,27 +194,7 @@ config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
> PPA routine service ID for setting L2 auxiliary control register.
>
> comment "OMAP Core Type"
> - depends on ARCH_OMAP2
> -
> -config SOC_OMAP2420
> - bool "OMAP2420 support (DEPRECATED)"
> - depends on ARCH_OMAP2
> - default y
> - select OMAP_DM_SYSTIMER
> - select OMAP_DM_TIMER
> - select SOC_HAS_OMAP2_SDRC
> - help
> - This SoC is scheduled for removal in early 2027,
> - since it uses the ARM1136r0 CPU revision.
> -
> -config SOC_OMAP2430
> - bool "OMAP2430 support (DEPRECATED)"
> - depends on ARCH_OMAP2
> - default y
> - select SOC_HAS_OMAP2_SDRC
> - help
> - This SoC is scheduled for removal in early 2027,
> - since it uses the ARM1136r0 CPU revision.
> + depends on ARCH_OMAP3
>
> config SOC_OMAP3430
> bool "OMAP3430 support"
> @@ -237,33 +207,9 @@ config SOC_TI81XX
> depends on ARCH_OMAP3
> default y
>
> -comment "OMAP Legacy Platform Data Board Type"
> - depends on ARCH_OMAP2PLUS
> -
> config MACH_OMAP_GENERIC
> bool
>
> -config MACH_OMAP2_TUSB6010
> - bool
> - depends on ARCH_OMAP2 && SOC_OMAP2420
> - default y if MACH_NOKIA_N8X0
> -
> -config MACH_NOKIA_N810
> - bool
> -
> -config MACH_NOKIA_N810_WIMAX
> - bool
> -
> -config MACH_NOKIA_N8X0
> - bool "Nokia N800/N810 (DEPRECATED)"
> - depends on SOC_OMAP2420
> - default y
> - select MACH_NOKIA_N810
> - select MACH_NOKIA_N810_WIMAX
> - help
> - This machine is scheduled for removal in early 2027,
> - since it uses the ARM1136r0 CPU revision.
> -
> endmenu
>
> endif
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index daf21127c82f..6c741442dc0d 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -5,23 +5,17 @@
>
> # Common support
> obj-y := id.o io.o control.o devices.o fb.o pm.o \
> - common.o dma.o omap-headsmp.o sram.o
> + common.o dma.o omap-headsmp.o
>
> -hwmod-common = omap_hwmod.o \
> +# OMAP3 hwmod specific
> +obj-$(CONFIG_ARCH_OMAP3) += sram.o omap_hwmod.o \
> omap_hwmod_common_data.o \
> omap_hwmod_common_ipblock_data.o \
> omap_device.o display.o hdq1w.o \
> i2c.o wd_timer.o
> -clock-common = clock.o
> -secure-common = omap-smc.o omap-secure.o
>
> -obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
> -obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
> -obj-$(CONFIG_ARCH_OMAP4) += $(secure-common)
> -obj-$(CONFIG_SOC_AM33XX) += $(secure-common)
> -obj-$(CONFIG_SOC_OMAP5) += $(secure-common)
> -obj-$(CONFIG_SOC_AM43XX) += $(secure-common)
> -obj-$(CONFIG_SOC_DRA7XX) += $(secure-common)
> +# secure world
> +obj-y += omap-smc.o omap-secure.o
>
> ifneq ($(CONFIG_SND_SOC_OMAP_MCBSP),)
> obj-$(CONFIG_OMAP_HWMOD) += mcbsp.o
> @@ -49,13 +43,7 @@ omap5-dra7-common-$(CONFIG_SOC_HAS_REALTIME_COUNTER) = timer.o
> obj-$(CONFIG_SOC_OMAP5) += $(omap5-dra7-common-y)
> obj-$(CONFIG_SOC_DRA7XX) += $(omap5-dra7-common-y)
>
> -# Functions loaded to SRAM
> -obj-$(CONFIG_SOC_OMAP2420) += sram242x.o
> -obj-$(CONFIG_SOC_OMAP2430) += sram243x.o
> -
> # Restart code (OMAP4/5 currently in omap4-common.c)
> -obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o
> -obj-$(CONFIG_SOC_OMAP2430) += omap2-restart.o
> obj-$(CONFIG_SOC_TI81XX) += ti81xx-restart.o
> obj-$(CONFIG_SOC_AM33XX) += am33xx-restart.o
> obj-$(CONFIG_SOC_AM43XX) += omap4-restart.o
> @@ -65,7 +53,6 @@ obj-$(CONFIG_SOC_OMAP5) += omap4-restart.o
> obj-$(CONFIG_SOC_DRA7XX) += omap4-restart.o
>
> # SMS/SDRC
> -obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
> # obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
>
> # OPP table initialization
> @@ -80,7 +67,6 @@ obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-pm-common)
> obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-pm-common)
>
> ifeq ($(CONFIG_PM),y)
> -obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
> obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
> omap-4-5-pm-common += pm44xx.o
> obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-pm-common)
> @@ -105,7 +91,6 @@ endif
>
> # PRCM
> obj-y += prm_common.o cm_common.o
> -obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o
> obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o
> obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
> omap-prcm-4-5-common = cminst44xx.o prm44xx.o \
> @@ -122,8 +107,6 @@ obj-$(CONFIG_SOC_AM43XX) += $(omap-prcm-4-5-common) \
>
> # OMAP voltage domains
> voltagedomain-common := voltage.o vc.o vp.o
> -obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common)
> -obj-$(CONFIG_ARCH_OMAP2) += voltagedomains2xxx_data.o
> obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common)
> obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o
> obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common)
> @@ -136,9 +119,6 @@ obj-$(CONFIG_SOC_DRA7XX) += $(voltagedomain-common)
>
> # OMAP powerdomain framework
> powerdomain-common += powerdomain.o powerdomain-common.o
> -obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common)
> -obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_data.o
> -obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_3xxx_data.o
> obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common)
> obj-$(CONFIG_ARCH_OMAP3) += powerdomains3xxx_data.o
> obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o
> @@ -155,10 +135,6 @@ obj-$(CONFIG_SOC_DRA7XX) += powerdomains7xx_data.o
>
> # PRCM clockdomain control
> clockdomain-common += clockdomain.o
> -obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common)
> -obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o
> -obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o
> -obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o
> obj-$(CONFIG_ARCH_OMAP3) += $(clockdomain-common)
> obj-$(CONFIG_ARCH_OMAP3) += clockdomains2xxx_3xxx_data.o
> obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o
> @@ -176,47 +152,20 @@ obj-$(CONFIG_SOC_DRA7XX) += $(clockdomain-common)
> obj-$(CONFIG_SOC_DRA7XX) += clockdomains7xx_data.o
>
> # Clock framework
> -obj-$(CONFIG_ARCH_OMAP2) += $(clock-common)
> -obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
> -obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
> -obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
> -obj-$(CONFIG_ARCH_OMAP3) += $(clock-common)
> -obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
> -obj-$(CONFIG_SOC_AM33XX) += $(clock-common)
> -obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
> -obj-$(CONFIG_SOC_DRA7XX) += $(clock-common)
> -obj-$(CONFIG_SOC_AM43XX) += $(clock-common)
> -
> -# OMAP2 clock rate set data (old "OPP" data)
> -obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
> -obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
> +obj-y += clock.o
>
> # hwmod data
> -obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o
> -obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o
> -obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o
> -obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2420_data.o
> -obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_ipblock_data.o
> -obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_3xxx_ipblock_data.o
> -obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_interconnect_data.o
> -obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o
> obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o
> obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
> obj-$(CONFIG_SOC_TI81XX) += omap_hwmod_81xx_data.o
>
> -# OMAP2420 MSDI controller integration support ("MMC")
> -obj-$(CONFIG_SOC_OMAP2420) += msdi.o
> -
> # Specific board support
> obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o pdata-quirks.o
> -obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
>
> # Platform specific device init code
>
> obj-y += omap_phy_internal.o
>
> -obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
> -
> $(obj)/pm-asm-offsets.h: $(obj)/pm-asm-offsets.s FORCE
> $(call filechk,offsets,__TI_PM_ASM_OFFSETS_H__)
>
> diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
> index bff673e932fe..972b8cf0547f 100644
> --- a/arch/arm/mach-omap2/board-generic.c
> +++ b/arch/arm/mach-omap2/board-generic.c
> @@ -45,40 +45,6 @@ void tick_broadcast(const struct cpumask *mask)
> }
> #endif
>
> -#ifdef CONFIG_SOC_OMAP2420
> -static const char *const omap242x_boards_compat[] __initconst = {
> - "ti,omap2420",
> - NULL,
> -};
> -
> -DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
> - .reserve = omap_reserve,
> - .map_io = omap242x_map_io,
> - .init_early = omap2420_init_early,
> - .init_machine = omap_generic_init,
> - .init_time = omap_init_time_of,
> - .dt_compat = omap242x_boards_compat,
> - .restart = omap2xxx_restart,
> -MACHINE_END
> -#endif
> -
> -#ifdef CONFIG_SOC_OMAP2430
> -static const char *const omap243x_boards_compat[] __initconst = {
> - "ti,omap2430",
> - NULL,
> -};
> -
> -DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
> - .reserve = omap_reserve,
> - .map_io = omap243x_map_io,
> - .init_early = omap2430_init_early,
> - .init_machine = omap_generic_init,
> - .init_time = omap_init_time_of,
> - .dt_compat = omap243x_boards_compat,
> - .restart = omap2xxx_restart,
> -MACHINE_END
> -#endif
> -
> #ifdef CONFIG_ARCH_OMAP3
> /* Some boards need board name for legacy userspace in /proc/cpuinfo */
> static const char *const n900_boards_compat[] __initconst = {
> diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
> deleted file mode 100644
> index d9acd32c5457..000000000000
> --- a/arch/arm/mach-omap2/board-n8x0.c
> +++ /dev/null
> @@ -1,512 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * linux/arch/arm/mach-omap2/board-n8x0.c
> - *
> - * Copyright (C) 2005-2009 Nokia Corporation
> - * Author: Juha Yrjola <juha.yrjola@nokia.com>
> - *
> - * Modified from mach-omap2/board-generic.c
> - */
> -
> -#include <linux/clk.h>
> -#include <linux/delay.h>
> -#include <linux/gpio/machine.h>
> -#include <linux/gpio/consumer.h>
> -#include <linux/init.h>
> -#include <linux/io.h>
> -#include <linux/irq.h>
> -#include <linux/stddef.h>
> -#include <linux/i2c.h>
> -#include <linux/spi/spi.h>
> -#include <linux/usb/musb.h>
> -#include <linux/mmc/host.h>
> -#include <linux/platform_data/mmc-omap.h>
> -#include <linux/mfd/menelaus.h>
> -
> -#include <asm/mach/arch.h>
> -#include <asm/mach-types.h>
> -
> -#include "common.h"
> -#include "mmc.h"
> -#include "usb-tusb6010.h"
> -#include "soc.h"
> -#include "common-board-devices.h"
> -
> -#define TUSB6010_ASYNC_CS 1
> -#define TUSB6010_SYNC_CS 4
> -#define TUSB6010_DMACHAN 0x3f
> -
> -#define NOKIA_N810_WIMAX (1 << 2)
> -#define NOKIA_N810 (1 << 1)
> -#define NOKIA_N800 (1 << 0)
> -
> -static u32 board_caps;
> -
> -#define board_is_n800() (board_caps & NOKIA_N800)
> -#define board_is_n810() (board_caps & NOKIA_N810)
> -#define board_is_n810_wimax() (board_caps & NOKIA_N810_WIMAX)
> -
> -static void board_check_revision(void)
> -{
> - if (of_machine_is_compatible("nokia,n800"))
> - board_caps = NOKIA_N800;
> - else if (of_machine_is_compatible("nokia,n810"))
> - board_caps = NOKIA_N810;
> - else if (of_machine_is_compatible("nokia,n810-wimax"))
> - board_caps = NOKIA_N810_WIMAX;
> -
> - if (!board_caps)
> - pr_err("Unknown board\n");
> -}
> -
> -#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
> -
> -static struct musb_hdrc_config musb_config = {
> - .multipoint = 1,
> - .dyn_fifo = 1,
> - .num_eps = 16,
> - .ram_bits = 12,
> -};
> -
> -static struct musb_hdrc_platform_data tusb_data = {
> - .mode = MUSB_OTG,
> - .min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */
> - .power = 100, /* Max 100 mA VBUS for host mode */
> - .config = &musb_config,
> -};
> -
> -static struct gpiod_lookup_table tusb_gpio_table = {
> - .dev_id = "musb-tusb",
> - .table = {
> - GPIO_LOOKUP("gpio-0-31", 0, "enable", GPIO_ACTIVE_HIGH),
> - GPIO_LOOKUP("gpio-32-63", 26, "int", GPIO_ACTIVE_HIGH),
> - { }
> - },
> -};
> -
> -static void __init n8x0_usb_init(void)
> -{
> - int ret = 0;
> -
> - gpiod_add_lookup_table(&tusb_gpio_table);
> - ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2,
> - TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
> - TUSB6010_DMACHAN);
> - if (ret != 0)
> - return;
> -
> - pr_info("TUSB 6010\n");
> -
> - return;
> -}
> -#else
> -
> -static void __init n8x0_usb_init(void) {}
> -
> -#endif /*CONFIG_USB_MUSB_TUSB6010 */
> -
> -#if defined(CONFIG_MENELAUS) && IS_ENABLED(CONFIG_MMC_OMAP)
> -
> -/*
> - * On both N800 and N810, only the first of the two MMC controllers is in use.
> - * The two MMC slots are multiplexed via Menelaus companion chip over I2C.
> - * On N800, both slots are powered via Menelaus. On N810, only one of the
> - * slots is powered via Menelaus. The N810 EMMC is powered via GPIO.
> - *
> - * VMMC slot 1 on both N800 and N810
> - * VDCDC3_APE and VMCS2_APE slot 2 on N800
> - * GPIO23 and GPIO9 slot 2 EMMC on N810
> - *
> - */
> -static int slot1_cover_open;
> -static int slot2_cover_open;
> -static struct device *mmc_device;
> -
> -static struct gpiod_lookup_table nokia800_mmc_gpio_table = {
> - .dev_id = "mmci-omap.0",
> - .table = {
> - /* Slot switch, GPIO 96 */
> - GPIO_LOOKUP("gpio-96-127", 0, "switch", GPIO_ACTIVE_HIGH),
> - { }
> - },
> -};
> -
> -static struct gpiod_lookup_table nokia810_mmc_gpio_table = {
> - .dev_id = "mmci-omap.0",
> - .table = {
> - /* Slot switch, GPIO 96 */
> - GPIO_LOOKUP("gpio-96-127", 0, "switch", GPIO_ACTIVE_HIGH),
> - /* Slot index 1, VSD power, GPIO 23 */
> - GPIO_LOOKUP_IDX("gpio-0-31", 23, "vsd", 1, GPIO_ACTIVE_HIGH),
> - /* Slot index 1, VIO power, GPIO 9 */
> - GPIO_LOOKUP_IDX("gpio-0-31", 9, "vio", 1, GPIO_ACTIVE_HIGH),
> - { }
> - },
> -};
> -
> -static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
> - int power_on, int vdd)
> -{
> - int mV;
> -
> -#ifdef CONFIG_MMC_DEBUG
> - dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
> - str_on_off(power_on), vdd);
> -#endif
> - if (slot == 0) {
> - if (!power_on)
> - return menelaus_set_vmmc(0);
> - switch (1 << vdd) {
> - case MMC_VDD_33_34:
> - case MMC_VDD_32_33:
> - case MMC_VDD_31_32:
> - mV = 3100;
> - break;
> - case MMC_VDD_30_31:
> - mV = 3000;
> - break;
> - case MMC_VDD_28_29:
> - mV = 2800;
> - break;
> - case MMC_VDD_165_195:
> - mV = 1850;
> - break;
> - default:
> - BUG();
> - }
> - return menelaus_set_vmmc(mV);
> - } else {
> - if (!power_on)
> - return menelaus_set_vdcdc(3, 0);
> - switch (1 << vdd) {
> - case MMC_VDD_33_34:
> - case MMC_VDD_32_33:
> - mV = 3300;
> - break;
> - case MMC_VDD_30_31:
> - case MMC_VDD_29_30:
> - mV = 3000;
> - break;
> - case MMC_VDD_28_29:
> - case MMC_VDD_27_28:
> - mV = 2800;
> - break;
> - case MMC_VDD_24_25:
> - case MMC_VDD_23_24:
> - mV = 2400;
> - break;
> - case MMC_VDD_22_23:
> - case MMC_VDD_21_22:
> - mV = 2200;
> - break;
> - case MMC_VDD_20_21:
> - mV = 2000;
> - break;
> - case MMC_VDD_165_195:
> - mV = 1800;
> - break;
> - default:
> - BUG();
> - }
> - return menelaus_set_vdcdc(3, mV);
> - }
> - return 0;
> -}
> -
> -static int n8x0_mmc_set_power(struct device *dev, int slot, int power_on,
> - int vdd)
> -{
> - if (board_is_n800() || slot == 0)
> - return n8x0_mmc_set_power_menelaus(dev, slot, power_on, vdd);
> -
> - /* The n810 power will be handled by GPIO code in the driver */
> -
> - return 0;
> -}
> -
> -static int n8x0_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
> -{
> - int r;
> -
> - dev_dbg(dev, "Set slot %d bus mode %s\n", slot + 1,
> - bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
> - BUG_ON(slot != 0 && slot != 1);
> - slot++;
> - switch (bus_mode) {
> - case MMC_BUSMODE_OPENDRAIN:
> - r = menelaus_set_mmc_opendrain(slot, 1);
> - break;
> - case MMC_BUSMODE_PUSHPULL:
> - r = menelaus_set_mmc_opendrain(slot, 0);
> - break;
> - default:
> - BUG();
> - }
> - if (r != 0 && printk_ratelimit())
> - dev_err(dev, "MMC: unable to set bus mode for slot %d\n",
> - slot);
> - return r;
> -}
> -
> -static int n8x0_mmc_get_cover_state(struct device *dev, int slot)
> -{
> - slot++;
> - BUG_ON(slot != 1 && slot != 2);
> - if (slot == 1)
> - return slot1_cover_open;
> - else
> - return slot2_cover_open;
> -}
> -
> -static void n8x0_mmc_callback(void *data, u8 card_mask)
> -{
> -#ifdef CONFIG_MMC_OMAP
> - int bit, *openp, index;
> -
> - if (board_is_n800()) {
> - bit = 1 << 1;
> - openp = &slot2_cover_open;
> - index = 1;
> - } else {
> - bit = 1;
> - openp = &slot1_cover_open;
> - index = 0;
> - }
> -
> - if (card_mask & bit)
> - *openp = 1;
> - else
> - *openp = 0;
> -
> - omap_mmc_notify_cover_event(mmc_device, index, *openp);
> -#else
> - pr_warn("MMC: notify cover event not available\n");
> -#endif
> -}
> -
> -static int n8x0_mmc_late_init(struct device *dev)
> -{
> - int r, bit, *openp;
> - int vs2sel;
> -
> - mmc_device = dev;
> -
> - r = menelaus_set_slot_sel(1);
> - if (r < 0)
> - return r;
> -
> - if (board_is_n800())
> - vs2sel = 0;
> - else
> - vs2sel = 2;
> -
> - r = menelaus_set_mmc_slot(2, 0, vs2sel, 1);
> - if (r < 0)
> - return r;
> -
> - n8x0_mmc_set_power(dev, 0, MMC_POWER_ON, 16); /* MMC_VDD_28_29 */
> - n8x0_mmc_set_power(dev, 1, MMC_POWER_ON, 16);
> -
> - r = menelaus_set_mmc_slot(1, 1, 0, 1);
> - if (r < 0)
> - return r;
> - r = menelaus_set_mmc_slot(2, 1, vs2sel, 1);
> - if (r < 0)
> - return r;
> -
> - r = menelaus_get_slot_pin_states();
> - if (r < 0)
> - return r;
> -
> - if (board_is_n800()) {
> - bit = 1 << 1;
> - openp = &slot2_cover_open;
> - } else {
> - bit = 1;
> - openp = &slot1_cover_open;
> - slot2_cover_open = 0;
> - }
> -
> - /* All slot pin bits seem to be inversed until first switch change */
> - if (r == 0xf || r == (0xf & ~bit))
> - r = ~r;
> -
> - if (r & bit)
> - *openp = 1;
> - else
> - *openp = 0;
> -
> - r = menelaus_register_mmc_callback(n8x0_mmc_callback, NULL);
> -
> - return r;
> -}
> -
> -static void n8x0_mmc_shutdown(struct device *dev)
> -{
> - int vs2sel;
> -
> - if (board_is_n800())
> - vs2sel = 0;
> - else
> - vs2sel = 2;
> -
> - menelaus_set_mmc_slot(1, 0, 0, 0);
> - menelaus_set_mmc_slot(2, 0, vs2sel, 0);
> -}
> -
> -static void n8x0_mmc_cleanup(struct device *dev)
> -{
> - menelaus_unregister_mmc_callback();
> -}
> -
> -/*
> - * MMC controller1 has two slots that are multiplexed via I2C.
> - * MMC controller2 is not in use.
> - */
> -static struct omap_mmc_platform_data mmc1_data = {
> - .nr_slots = 0,
> - .init = n8x0_mmc_late_init,
> - .cleanup = n8x0_mmc_cleanup,
> - .shutdown = n8x0_mmc_shutdown,
> - .max_freq = 24000000,
> - .slots[0] = {
> - .wires = 4,
> - .set_power = n8x0_mmc_set_power,
> - .set_bus_mode = n8x0_mmc_set_bus_mode,
> - .get_cover_state = n8x0_mmc_get_cover_state,
> - .ocr_mask = MMC_VDD_165_195 | MMC_VDD_30_31 |
> - MMC_VDD_32_33 | MMC_VDD_33_34,
> - .name = "internal",
> - },
> - .slots[1] = {
> - .set_power = n8x0_mmc_set_power,
> - .set_bus_mode = n8x0_mmc_set_bus_mode,
> - .get_cover_state = n8x0_mmc_get_cover_state,
> - .ocr_mask = MMC_VDD_165_195 | MMC_VDD_20_21 |
> - MMC_VDD_21_22 | MMC_VDD_22_23 |
> - MMC_VDD_23_24 | MMC_VDD_24_25 |
> - MMC_VDD_27_28 | MMC_VDD_28_29 |
> - MMC_VDD_29_30 | MMC_VDD_30_31 |
> - MMC_VDD_32_33 | MMC_VDD_33_34,
> - .name = "external",
> - },
> -};
> -
> -static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
> -
> -static void __init n8x0_mmc_init(void)
> -{
> - if (board_is_n810()) {
> - mmc1_data.slots[0].name = "external";
> -
> - /*
> - * Some Samsung Movinand chips do not like open-ended
> - * multi-block reads and fall to braind-dead state
> - * while doing so. Reducing the number of blocks in
> - * the transfer or delays in clock disable do not help
> - */
> - mmc1_data.slots[1].name = "internal";
> - mmc1_data.slots[1].ban_openended = 1;
> - gpiod_add_lookup_table(&nokia810_mmc_gpio_table);
> - } else {
> - gpiod_add_lookup_table(&nokia800_mmc_gpio_table);
> - }
> -
> - mmc1_data.nr_slots = 2;
> - mmc_data[0] = &mmc1_data;
> -}
> -#else
> -static struct omap_mmc_platform_data mmc1_data;
> -static void __init n8x0_mmc_init(void)
> -{
> -}
> -#endif /* CONFIG_MMC_OMAP */
> -
> -#ifdef CONFIG_MENELAUS
> -
> -static int n8x0_auto_sleep_regulators(void)
> -{
> - u32 val;
> - int ret;
> -
> - val = EN_VPLL_SLEEP | EN_VMMC_SLEEP \
> - | EN_VAUX_SLEEP | EN_VIO_SLEEP \
> - | EN_VMEM_SLEEP | EN_DC3_SLEEP \
> - | EN_VC_SLEEP | EN_DC2_SLEEP;
> -
> - ret = menelaus_set_regulator_sleep(1, val);
> - if (ret < 0) {
> - pr_err("Could not set regulators to sleep on menelaus: %u\n",
> - ret);
> - return ret;
> - }
> - return 0;
> -}
> -
> -static int n8x0_auto_voltage_scale(void)
> -{
> - int ret;
> -
> - ret = menelaus_set_vcore_hw(1400, 1050);
> - if (ret < 0) {
> - pr_err("Could not set VCORE voltage on menelaus: %u\n", ret);
> - return ret;
> - }
> - return 0;
> -}
> -
> -static int n8x0_menelaus_late_init(struct device *dev)
> -{
> - int ret;
> -
> - ret = n8x0_auto_voltage_scale();
> - if (ret < 0)
> - return ret;
> - ret = n8x0_auto_sleep_regulators();
> - if (ret < 0)
> - return ret;
> - return 0;
> -}
> -
> -#else
> -static int n8x0_menelaus_late_init(struct device *dev)
> -{
> - return 0;
> -}
> -#endif
> -
> -struct menelaus_platform_data n8x0_menelaus_platform_data = {
> - .late_init = n8x0_menelaus_late_init,
> -};
> -
> -static struct gpiod_lookup_table nokia810_asoc_gpio_table = {
> - .dev_id = "soc-audio",
> - .table = {
> - GPIO_LOOKUP("gpio-0-15", 10, "headset", GPIO_ACTIVE_HIGH),
> - GPIO_LOOKUP("gpio-80-111", 21, "speaker", GPIO_ACTIVE_HIGH),
> - { }
> - },
> -};
> -
> -static int __init n8x0_late_initcall(void)
> -{
> - if (!board_caps)
> - return -ENODEV;
> -
> - n8x0_mmc_init();
> - n8x0_usb_init();
> - gpiod_add_lookup_table(&nokia810_asoc_gpio_table);
> -
> - return 0;
> -}
> -omap_late_initcall(n8x0_late_initcall);
> -
> -/*
> - * Legacy init pdata init for n8x0. Note that we want to follow the
> - * I2C bus numbering starting at 0 for device tree like other omaps.
> - */
> -void * __init n8x0_legacy_init(void)
> -{
> - board_check_revision();
> - return &mmc1_data;
> -}
> diff --git a/arch/arm/mach-omap2/clkt2xxx_dpll.c b/arch/arm/mach-omap2/clkt2xxx_dpll.c
> deleted file mode 100644
> index 0edebf3355fa..000000000000
> --- a/arch/arm/mach-omap2/clkt2xxx_dpll.c
> +++ /dev/null
> @@ -1,56 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * OMAP2-specific DPLL control functions
> - *
> - * Copyright (C) 2011 Nokia Corporation
> - * Paul Walmsley
> - */
> -
> -#include <linux/kernel.h>
> -#include <linux/errno.h>
> -#include <linux/clk.h>
> -#include <linux/io.h>
> -
> -#include "clock.h"
> -#include "cm2xxx.h"
> -#include "cm-regbits-24xx.h"
> -
> -/* Private functions */
> -
> -/**
> - * _allow_idle - enable DPLL autoidle bits
> - * @clk: struct clk * of the DPLL to operate on
> - *
> - * Enable DPLL automatic idle control. The DPLL will enter low-power
> - * stop when its downstream clocks are gated. No return value.
> - * REVISIT: DPLL can optionally enter low-power bypass by writing 0x1
> - * instead. Add some mechanism to optionally enter this mode.
> - */
> -static void _allow_idle(struct clk_hw_omap *clk)
> -{
> - if (!clk || !clk->dpll_data)
> - return;
> -
> - omap2xxx_cm_set_dpll_auto_low_power_stop();
> -}
> -
> -/**
> - * _deny_idle - prevent DPLL from automatically idling
> - * @clk: struct clk * of the DPLL to operate on
> - *
> - * Disable DPLL automatic idle control. No return value.
> - */
> -static void _deny_idle(struct clk_hw_omap *clk)
> -{
> - if (!clk || !clk->dpll_data)
> - return;
> -
> - omap2xxx_cm_set_dpll_disable_autoidle();
> -}
> -
> -
> -/* Public data */
> -const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll = {
> - .allow_idle = _allow_idle,
> - .deny_idle = _deny_idle,
> -};
> diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
> deleted file mode 100644
> index 93f6d3cd9525..000000000000
> --- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
> +++ /dev/null
> @@ -1,194 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * DPLL + CORE_CLK composite clock functions
> - *
> - * Copyright (C) 2005-2008 Texas Instruments, Inc.
> - * Copyright (C) 2004-2010 Nokia Corporation
> - *
> - * Contacts:
> - * Richard Woodruff <r-woodruff2@ti.com>
> - * Paul Walmsley
> - *
> - * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
> - * Gordon McNutt and RidgeRun, Inc.
> - *
> - * XXX The DPLL and CORE clocks should be split into two separate clock
> - * types.
> - */
> -#undef DEBUG
> -
> -#include <linux/kernel.h>
> -#include <linux/errno.h>
> -#include <linux/clk.h>
> -#include <linux/clk/ti.h>
> -#include <linux/io.h>
> -
> -#include "clock.h"
> -#include "clock2xxx.h"
> -#include "opp2xxx.h"
> -#include "cm2xxx.h"
> -#include "cm-regbits-24xx.h"
> -#include "sdrc.h"
> -#include "sram.h"
> -
> -/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
> -
> -/*
> - * dpll_core_ck: pointer to the combined dpll_ck + core_ck on OMAP2xxx
> - * (currently defined as "dpll_ck" in the OMAP2xxx clock tree). Set
> - * during dpll_ck init and used later by omap2xxx_clk_get_core_rate().
> - */
> -static struct clk_hw_omap *dpll_core_ck;
> -
> -/**
> - * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
> - *
> - * Returns the CORE_CLK rate. CORE_CLK can have one of three rate
> - * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
> - * (the latter is unusual). This currently should be called with
> - * struct clk *dpll_ck, which is a composite clock of dpll_ck and
> - * core_ck.
> - */
> -unsigned long omap2xxx_clk_get_core_rate(void)
> -{
> - long long core_clk;
> - u32 v;
> -
> - WARN_ON(!dpll_core_ck);
> -
> - core_clk = omap2_get_dpll_rate(dpll_core_ck);
> -
> - v = omap2xxx_cm_get_core_clk_src();
> -
> - if (v == CORE_CLK_SRC_32K)
> - core_clk = 32768;
> - else
> - core_clk *= v;
> -
> - return core_clk;
> -}
> -
> -/*
> - * Uses the current prcm set to tell if a rate is valid.
> - * You can go slower, but not faster within a given rate set.
> - */
> -static long omap2_dpllcore_round_rate(unsigned long target_rate)
> -{
> - u32 high, low, core_clk_src;
> -
> - core_clk_src = omap2xxx_cm_get_core_clk_src();
> -
> - if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */
> - high = curr_prcm_set->dpll_speed * 2;
> - low = curr_prcm_set->dpll_speed;
> - } else { /* DPLL clockout x 2 */
> - high = curr_prcm_set->dpll_speed;
> - low = curr_prcm_set->dpll_speed / 2;
> - }
> -
> -#ifdef DOWN_VARIABLE_DPLL
> - if (target_rate > high)
> - return high;
> - else
> - return target_rate;
> -#else
> - if (target_rate > low)
> - return high;
> - else
> - return low;
> -#endif
> -
> -}
> -
> -unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
> - unsigned long parent_rate)
> -{
> - return omap2xxx_clk_get_core_rate();
> -}
> -
> -int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate,
> - unsigned long parent_rate)
> -{
> - struct clk_hw_omap *clk = to_clk_hw_omap(hw);
> - u32 cur_rate, low, mult, div, valid_rate, done_rate;
> - u32 bypass = 0;
> - struct prcm_config tmpset;
> - const struct dpll_data *dd;
> -
> - cur_rate = omap2xxx_clk_get_core_rate();
> - mult = omap2xxx_cm_get_core_clk_src();
> -
> - if ((rate == (cur_rate / 2)) && (mult == 2)) {
> - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
> - } else if ((rate == (cur_rate * 2)) && (mult == 1)) {
> - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
> - } else if (rate != cur_rate) {
> - valid_rate = omap2_dpllcore_round_rate(rate);
> - if (valid_rate != rate)
> - return -EINVAL;
> -
> - if (mult == 1)
> - low = curr_prcm_set->dpll_speed;
> - else
> - low = curr_prcm_set->dpll_speed / 2;
> -
> - dd = clk->dpll_data;
> - if (!dd)
> - return -EINVAL;
> -
> - tmpset.cm_clksel1_pll =
> - omap_clk_ll_ops.clk_readl(&dd->mult_div1_reg);
> - tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
> - dd->div1_mask);
> - div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
> - tmpset.cm_clksel2_pll = omap2xxx_cm_get_core_pll_config();
> - tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
> - if (rate > low) {
> - tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
> - mult = ((rate / 2) / 1000000);
> - done_rate = CORE_CLK_SRC_DPLL_X2;
> - } else {
> - tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
> - mult = (rate / 1000000);
> - done_rate = CORE_CLK_SRC_DPLL;
> - }
> - tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
> - tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
> -
> - /* Worst case */
> - tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
> -
> - if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */
> - bypass = 1;
> -
> - /* For omap2xxx_sdrc_init_params() */
> - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
> -
> - /* Force dll lock mode */
> - omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
> - bypass);
> -
> - /* Errata: ret dll entry state */
> - omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
> - omap2xxx_sdrc_reprogram(done_rate, 0);
> - }
> -
> - return 0;
> -}
> -
> -/**
> - * omap2xxx_clkt_dpllcore_init - clk init function for dpll_ck
> - * @clk: struct clk *dpll_ck
> - *
> - * Store a local copy of @clk in dpll_core_ck so other code can query
> - * the core rate without having to clk_get(), which can sleep. Must
> - * only be called once. No return value. XXX If the clock
> - * registration process is ever changed such that dpll_ck is no longer
> - * statically defined, this code may need to change to increment some
> - * kind of use count on dpll_ck.
> - */
> -void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw)
> -{
> - WARN(dpll_core_ck, "dpll_core_ck already set - should never happen");
> - dpll_core_ck = to_clk_hw_omap(hw);
> -}
> diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
> deleted file mode 100644
> index 2b04e422b46c..000000000000
> --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
> +++ /dev/null
> @@ -1,259 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * OMAP2xxx DVFS virtual clock functions
> - *
> - * Copyright (C) 2005-2008, 2012 Texas Instruments, Inc.
> - * Copyright (C) 2004-2010 Nokia Corporation
> - *
> - * Contacts:
> - * Richard Woodruff <r-woodruff2@ti.com>
> - * Paul Walmsley
> - *
> - * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
> - * Gordon McNutt and RidgeRun, Inc.
> - *
> - * XXX Some of this code should be replaceable by the upcoming OPP layer
> - * code. However, some notion of "rate set" is probably still necessary
> - * for OMAP2xxx at least. Rate sets should be generalized so they can be
> - * used for any OMAP chip, not just OMAP2xxx. In particular, Richard Woodruff
> - * has in the past expressed a preference to use rate sets for OPP changes,
> - * rather than dynamically recalculating the clock tree, so if someone wants
> - * this badly enough to write the code to handle it, we should support it
> - * as an option.
> - */
> -#undef DEBUG
> -
> -#include <linux/kernel.h>
> -#include <linux/errno.h>
> -#include <linux/clk.h>
> -#include <linux/io.h>
> -#include <linux/cpufreq.h>
> -#include <linux/slab.h>
> -
> -#include "soc.h"
> -#include "clock.h"
> -#include "clock2xxx.h"
> -#include "opp2xxx.h"
> -#include "cm2xxx.h"
> -#include "cm-regbits-24xx.h"
> -#include "sdrc.h"
> -#include "sram.h"
> -
> -static u16 cpu_mask;
> -
> -const struct prcm_config *curr_prcm_set;
> -const struct prcm_config *rate_table;
> -
> -/*
> - * sys_ck_rate: the rate of the external high-frequency clock
> - * oscillator on the board. Set by the SoC-specific clock init code.
> - * Once set during a boot, will not change.
> - */
> -static unsigned long sys_ck_rate;
> -
> -/**
> - * omap2_table_mpu_recalc - just return the MPU speed
> - * @clk: virt_prcm_set struct clk
> - *
> - * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
> - */
> -static unsigned long omap2_table_mpu_recalc(struct clk_hw *clk,
> - unsigned long parent_rate)
> -{
> - return curr_prcm_set->mpu_speed;
> -}
> -
> -/*
> - * Look for a rate equal or less than the target rate given a configuration set.
> - *
> - * What's not entirely clear is "which" field represents the key field.
> - * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
> - * just uses the ARM rates.
> - */
> -static int omap2_determine_rate_to_table(struct clk_hw *hw,
> - struct clk_rate_request *req)
> -{
> - const struct prcm_config *ptr;
> - long highest_rate;
> -
> - highest_rate = -EINVAL;
> -
> - for (ptr = rate_table; ptr->mpu_speed; ptr++) {
> - if (!(ptr->flags & cpu_mask))
> - continue;
> - if (ptr->xtal_speed != sys_ck_rate)
> - continue;
> -
> - highest_rate = ptr->mpu_speed;
> -
> - /* Can check only after xtal frequency check */
> - if (ptr->mpu_speed <= req->rate)
> - break;
> - }
> - req->rate = highest_rate;
> -
> - return 0;
> -}
> -
> -/* Sets basic clocks based on the specified rate */
> -static int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate,
> - unsigned long parent_rate)
> -{
> - u32 cur_rate, done_rate, bypass = 0;
> - const struct prcm_config *prcm;
> - unsigned long found_speed = 0;
> - unsigned long flags;
> -
> - for (prcm = rate_table; prcm->mpu_speed; prcm++) {
> - if (!(prcm->flags & cpu_mask))
> - continue;
> -
> - if (prcm->xtal_speed != sys_ck_rate)
> - continue;
> -
> - if (prcm->mpu_speed <= rate) {
> - found_speed = prcm->mpu_speed;
> - break;
> - }
> - }
> -
> - if (!found_speed) {
> - printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
> - rate / 1000000);
> - return -EINVAL;
> - }
> -
> - curr_prcm_set = prcm;
> - cur_rate = omap2xxx_clk_get_core_rate();
> -
> - if (prcm->dpll_speed == cur_rate / 2) {
> - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
> - } else if (prcm->dpll_speed == cur_rate * 2) {
> - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
> - } else if (prcm->dpll_speed != cur_rate) {
> - local_irq_save(flags);
> -
> - if (prcm->dpll_speed == prcm->xtal_speed)
> - bypass = 1;
> -
> - if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
> - CORE_CLK_SRC_DPLL_X2)
> - done_rate = CORE_CLK_SRC_DPLL_X2;
> - else
> - done_rate = CORE_CLK_SRC_DPLL;
> -
> - omap2xxx_cm_set_mod_dividers(prcm->cm_clksel_mpu,
> - prcm->cm_clksel_dsp,
> - prcm->cm_clksel_gfx,
> - prcm->cm_clksel1_core,
> - prcm->cm_clksel_mdm);
> -
> - /* x2 to enter omap2xxx_sdrc_init_params() */
> - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
> -
> - omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
> - bypass);
> -
> - omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
> - omap2xxx_sdrc_reprogram(done_rate, 0);
> -
> - local_irq_restore(flags);
> - }
> -
> - return 0;
> -}
> -
> -/**
> - * omap2xxx_clkt_vps_check_bootloader_rates - determine which of the rate
> - * table sets matches the current CORE DPLL hardware rate
> - *
> - * Check the MPU rate set by bootloader. Sets the 'curr_prcm_set'
> - * global to point to the active rate set when found; otherwise, sets
> - * it to NULL. No return value;
> - */
> -static void omap2xxx_clkt_vps_check_bootloader_rates(void)
> -{
> - const struct prcm_config *prcm = NULL;
> - unsigned long rate;
> -
> - rate = omap2xxx_clk_get_core_rate();
> - for (prcm = rate_table; prcm->mpu_speed; prcm++) {
> - if (!(prcm->flags & cpu_mask))
> - continue;
> - if (prcm->xtal_speed != sys_ck_rate)
> - continue;
> - if (prcm->dpll_speed <= rate)
> - break;
> - }
> - curr_prcm_set = prcm;
> -}
> -
> -/**
> - * omap2xxx_clkt_vps_late_init - store a copy of the sys_ck rate
> - *
> - * Store a copy of the sys_ck rate for later use by the OMAP2xxx DVFS
> - * code. (The sys_ck rate does not -- or rather, must not -- change
> - * during kernel runtime.) Must be called after we have a valid
> - * sys_ck rate, but before the virt_prcm_set clock rate is
> - * recalculated. No return value.
> - */
> -static void omap2xxx_clkt_vps_late_init(void)
> -{
> - struct clk *c;
> -
> - c = clk_get(NULL, "sys_ck");
> - if (IS_ERR(c)) {
> - WARN(1, "could not locate sys_ck\n");
> - } else {
> - sys_ck_rate = clk_get_rate(c);
> - clk_put(c);
> - }
> -}
> -
> -#ifdef CONFIG_OF
> -#include <linux/clk-provider.h>
> -#include <linux/clkdev.h>
> -
> -static const struct clk_ops virt_prcm_set_ops = {
> - .recalc_rate = &omap2_table_mpu_recalc,
> - .set_rate = &omap2_select_table_rate,
> - .determine_rate = &omap2_determine_rate_to_table,
> -};
> -
> -/**
> - * omap2xxx_clkt_vps_init - initialize virt_prcm_set clock
> - *
> - * Does a manual init for the virtual prcm DVFS clock for OMAP2. This
> - * function is called only from omap2 DT clock init, as the virtual
> - * node is not modelled in the DT clock data.
> - */
> -void omap2xxx_clkt_vps_init(void)
> -{
> - struct clk_init_data init = { NULL };
> - struct clk_hw_omap *hw = NULL;
> - struct clk *clk;
> - const char *parent_name = "mpu_ck";
> -
> - omap2xxx_clkt_vps_late_init();
> - omap2xxx_clkt_vps_check_bootloader_rates();
> -
> - hw = kzalloc_obj(*hw);
> - if (!hw)
> - return;
> - init.name = "virt_prcm_set";
> - init.ops = &virt_prcm_set_ops;
> - init.parent_names = &parent_name;
> - init.num_parents = 1;
> -
> - hw->hw.init = &init;
> -
> - clk = clk_register(NULL, &hw->hw);
> - if (IS_ERR(clk)) {
> - printk(KERN_ERR "Failed to register clock\n");
> - kfree(hw);
> - return;
> - }
> -
> - clkdev_create(clk, "cpufreq_ck", NULL);
> -}
> -#endif
> diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
> index 83fae51722a9..b73a80503da8 100644
> --- a/arch/arm/mach-omap2/clock.c
> +++ b/arch/arm/mach-omap2/clock.c
> @@ -30,9 +30,7 @@
> #include "clockdomain.h"
> #include "clock.h"
> #include "cm.h"
> -#include "cm2xxx.h"
> #include "cm3xxx.h"
> -#include "cm-regbits-24xx.h"
> #include "cm-regbits-34xx.h"
> #include "common.h"
>
> @@ -94,11 +92,7 @@ void __init ti_clk_init_features(void)
> }
>
> /* Bypass value setup for DPLLs */
> - if (cpu_is_omap24xx()) {
> - features.dpll_bypass_vals |=
> - (1 << OMAP2XXX_EN_DPLL_LPBYPASS) |
> - (1 << OMAP2XXX_EN_DPLL_FRBYPASS);
> - } else if (cpu_is_omap34xx()) {
> + if (cpu_is_omap34xx()) {
> features.dpll_bypass_vals |=
> (1 << OMAP3XXX_EN_DPLL_LPBYPASS) |
> (1 << OMAP3XXX_EN_DPLL_FRBYPASS);
> @@ -122,9 +116,7 @@ void __init ti_clk_init_features(void)
> * 34xx reverses this, just to keep us on our toes
> * AM35xx uses both, depending on the module.
> */
> - if (cpu_is_omap24xx())
> - features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
> - else if (cpu_is_omap34xx())
> + if (cpu_is_omap34xx())
> features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
>
> /* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */
> diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h
> deleted file mode 100644
> index 73c011dadfd2..000000000000
> --- a/arch/arm/mach-omap2/clock2xxx.h
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -/*
> - * OMAP2 clock function prototypes and macros
> - *
> - * Copyright (C) 2005-2010 Texas Instruments, Inc.
> - * Copyright (C) 2004-2010 Nokia Corporation
> - */
> -
> -#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK2XXX_H
> -#define __ARCH_ARM_MACH_OMAP2_CLOCK2XXX_H
> -
> -#include <linux/clk-provider.h>
> -#include "clock.h"
> -
> -unsigned long omap2xxx_clk_get_core_rate(void);
> -
> -#endif
> diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
> index 69dc5b839335..4b5ae1f40d50 100644
> --- a/arch/arm/mach-omap2/clockdomain.c
> +++ b/arch/arm/mach-omap2/clockdomain.c
> @@ -1213,7 +1213,7 @@ int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
> int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh)
> {
> /* The clkdm attribute does not exist yet prior OMAP4 */
> - if (cpu_is_omap24xx() || cpu_is_omap34xx())
> + if (cpu_is_omap34xx())
> return 0;
>
> /*
> @@ -1244,7 +1244,7 @@ int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh)
> int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh)
> {
> /* The clkdm attribute does not exist yet prior OMAP4 */
> - if (cpu_is_omap24xx() || cpu_is_omap34xx())
> + if (cpu_is_omap34xx())
> return 0;
>
> if (!oh)
> diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
> index 86a2f9e5d0ef..2d422b5f121f 100644
> --- a/arch/arm/mach-omap2/clockdomain.h
> +++ b/arch/arm/mach-omap2/clockdomain.h
> @@ -216,8 +216,6 @@ int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh);
> void clkdm_save_context(void);
> void clkdm_restore_context(void);
>
> -extern void __init omap242x_clockdomains_init(void);
> -extern void __init omap243x_clockdomains_init(void);
> extern void __init omap3xxx_clockdomains_init(void);
> extern void __init am33xx_clockdomains_init(void);
> extern void __init ti814x_clockdomains_init(void);
> @@ -230,14 +228,11 @@ void am43xx_clockdomains_init(void);
> extern void clkdm_add_autodeps(struct clockdomain *clkdm);
> extern void clkdm_del_autodeps(struct clockdomain *clkdm);
>
> -extern struct clkdm_ops omap2_clkdm_operations;
> extern struct clkdm_ops omap3_clkdm_operations;
> extern struct clkdm_ops omap4_clkdm_operations;
> extern struct clkdm_ops am33xx_clkdm_operations;
> extern struct clkdm_ops am43xx_clkdm_operations;
>
> -extern struct clkdm_dep gfx_24xx_wkdeps[];
> -extern struct clkdm_dep dsp_24xx_wkdeps[];
> extern struct clockdomain wkup_common_clkdm;
>
> #endif
> diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c
> deleted file mode 100644
> index ac4ffb5d2ffc..000000000000
> --- a/arch/arm/mach-omap2/clockdomains2420_data.c
> +++ /dev/null
> @@ -1,154 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * OMAP2420 clockdomains
> - *
> - * Copyright (C) 2008-2011 Texas Instruments, Inc.
> - * Copyright (C) 2008-2010 Nokia Corporation
> - *
> - * Paul Walmsley, Jouni Högander
> - *
> - * This file contains clockdomains and clockdomain wakeup dependencies
> - * for OMAP2420 chips. Some notes:
> - *
> - * A useful validation rule for struct clockdomain: Any clockdomain
> - * referenced by a wkdep_srcs must have a dep_bit assigned. So
> - * wkdep_srcs are really just software-controllable dependencies.
> - * Non-software-controllable dependencies do exist, but they are not
> - * encoded below (yet).
> - *
> - * 24xx does not support programmable sleep dependencies (SLEEPDEP)
> - *
> - * The overly-specific dep_bit names are due to a bit name collision
> - * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
> - * value are the same for all powerdomains: 2
> - *
> - * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
> - * sanity check?
> - * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
> - */
> -
> -/*
> - * To-Do List
> - * -> Port the Sleep/Wakeup dependencies for the domains
> - * from the Power domain framework
> - */
> -
> -#include <linux/kernel.h>
> -#include <linux/io.h>
> -
> -#include "soc.h"
> -#include "clockdomain.h"
> -#include "prm2xxx_3xxx.h"
> -#include "cm2xxx_3xxx.h"
> -#include "cm-regbits-24xx.h"
> -#include "prm-regbits-24xx.h"
> -
> -/*
> - * Clockdomain dependencies for wkdeps
> - *
> - * XXX Hardware dependencies (e.g., dependencies that cannot be
> - * changed in software) are not included here yet, but should be.
> - */
> -
> -/* Wakeup dependency source arrays */
> -
> -/* 2420-specific possible wakeup dependencies */
> -
> -/* 2420 PM_WKDEP_MPU: CORE, DSP, WKUP */
> -static struct clkdm_dep mpu_2420_wkdeps[] = {
> - { .clkdm_name = "core_l3_clkdm" },
> - { .clkdm_name = "core_l4_clkdm" },
> - { .clkdm_name = "dsp_clkdm" },
> - { .clkdm_name = "wkup_clkdm" },
> - { NULL },
> -};
> -
> -/* 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP */
> -static struct clkdm_dep core_2420_wkdeps[] = {
> - { .clkdm_name = "dsp_clkdm" },
> - { .clkdm_name = "gfx_clkdm" },
> - { .clkdm_name = "mpu_clkdm" },
> - { .clkdm_name = "wkup_clkdm" },
> - { NULL },
> -};
> -
> -/*
> - * 2420-only clockdomains
> - */
> -
> -static struct clockdomain mpu_2420_clkdm = {
> - .name = "mpu_clkdm",
> - .pwrdm = { .name = "mpu_pwrdm" },
> - .flags = CLKDM_CAN_HWSUP,
> - .wkdep_srcs = mpu_2420_wkdeps,
> - .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
> -};
> -
> -static struct clockdomain iva1_2420_clkdm = {
> - .name = "iva1_clkdm",
> - .pwrdm = { .name = "dsp_pwrdm" },
> - .flags = CLKDM_CAN_HWSUP_SWSUP,
> - .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
> - .wkdep_srcs = dsp_24xx_wkdeps,
> - .clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
> -};
> -
> -static struct clockdomain dsp_2420_clkdm = {
> - .name = "dsp_clkdm",
> - .pwrdm = { .name = "dsp_pwrdm" },
> - .flags = CLKDM_CAN_HWSUP_SWSUP,
> - .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
> -};
> -
> -static struct clockdomain gfx_2420_clkdm = {
> - .name = "gfx_clkdm",
> - .pwrdm = { .name = "gfx_pwrdm" },
> - .flags = CLKDM_CAN_HWSUP_SWSUP,
> - .wkdep_srcs = gfx_24xx_wkdeps,
> - .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
> -};
> -
> -static struct clockdomain core_l3_2420_clkdm = {
> - .name = "core_l3_clkdm",
> - .pwrdm = { .name = "core_pwrdm" },
> - .flags = CLKDM_CAN_HWSUP,
> - .wkdep_srcs = core_2420_wkdeps,
> - .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
> -};
> -
> -static struct clockdomain core_l4_2420_clkdm = {
> - .name = "core_l4_clkdm",
> - .pwrdm = { .name = "core_pwrdm" },
> - .flags = CLKDM_CAN_HWSUP,
> - .wkdep_srcs = core_2420_wkdeps,
> - .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
> -};
> -
> -static struct clockdomain dss_2420_clkdm = {
> - .name = "dss_clkdm",
> - .pwrdm = { .name = "core_pwrdm" },
> - .flags = CLKDM_CAN_HWSUP,
> - .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
> -};
> -
> -static struct clockdomain *clockdomains_omap242x[] __initdata = {
> - &wkup_common_clkdm,
> - &mpu_2420_clkdm,
> - &iva1_2420_clkdm,
> - &dsp_2420_clkdm,
> - &gfx_2420_clkdm,
> - &core_l3_2420_clkdm,
> - &core_l4_2420_clkdm,
> - &dss_2420_clkdm,
> - NULL,
> -};
> -
> -void __init omap242x_clockdomains_init(void)
> -{
> - if (!cpu_is_omap242x())
> - return;
> -
> - clkdm_register_platform_funcs(&omap2_clkdm_operations);
> - clkdm_register_clkdms(clockdomains_omap242x);
> - clkdm_complete_init();
> -}
> diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c
> deleted file mode 100644
> index 0e97e178abaa..000000000000
> --- a/arch/arm/mach-omap2/clockdomains2430_data.c
> +++ /dev/null
> @@ -1,181 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * OMAP2xxx clockdomains
> - *
> - * Copyright (C) 2008-2009 Texas Instruments, Inc.
> - * Copyright (C) 2008-2010 Nokia Corporation
> - *
> - * Paul Walmsley, Jouni Högander
> - *
> - * This file contains clockdomains and clockdomain wakeup dependencies
> - * for OMAP2xxx chips. Some notes:
> - *
> - * A useful validation rule for struct clockdomain: Any clockdomain
> - * referenced by a wkdep_srcs must have a dep_bit assigned. So
> - * wkdep_srcs are really just software-controllable dependencies.
> - * Non-software-controllable dependencies do exist, but they are not
> - * encoded below (yet).
> - *
> - * 24xx does not support programmable sleep dependencies (SLEEPDEP)
> - *
> - * The overly-specific dep_bit names are due to a bit name collision
> - * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
> - * value are the same for all powerdomains: 2
> - *
> - * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
> - * sanity check?
> - * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
> - */
> -
> -/*
> - * To-Do List
> - * -> Port the Sleep/Wakeup dependencies for the domains
> - * from the Power domain framework
> - */
> -
> -#include <linux/kernel.h>
> -#include <linux/io.h>
> -
> -#include "soc.h"
> -#include "clockdomain.h"
> -#include "prm2xxx_3xxx.h"
> -#include "cm2xxx_3xxx.h"
> -#include "cm-regbits-24xx.h"
> -#include "prm-regbits-24xx.h"
> -
> -/*
> - * Clockdomain dependencies for wkdeps
> - *
> - * XXX Hardware dependencies (e.g., dependencies that cannot be
> - * changed in software) are not included here yet, but should be.
> - */
> -
> -/* Wakeup dependency source arrays */
> -
> -/* 2430-specific possible wakeup dependencies */
> -
> -/* 2430 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP, MDM */
> -static struct clkdm_dep core_2430_wkdeps[] = {
> - { .clkdm_name = "dsp_clkdm" },
> - { .clkdm_name = "gfx_clkdm" },
> - { .clkdm_name = "mpu_clkdm" },
> - { .clkdm_name = "wkup_clkdm" },
> - { .clkdm_name = "mdm_clkdm" },
> - { NULL },
> -};
> -
> -/* 2430 PM_WKDEP_MPU: CORE, DSP, WKUP, MDM */
> -static struct clkdm_dep mpu_2430_wkdeps[] = {
> - { .clkdm_name = "core_l3_clkdm" },
> - { .clkdm_name = "core_l4_clkdm" },
> - { .clkdm_name = "dsp_clkdm" },
> - { .clkdm_name = "wkup_clkdm" },
> - { .clkdm_name = "mdm_clkdm" },
> - { NULL },
> -};
> -
> -/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
> -static struct clkdm_dep mdm_2430_wkdeps[] = {
> - { .clkdm_name = "core_l3_clkdm" },
> - { .clkdm_name = "core_l4_clkdm" },
> - { .clkdm_name = "mpu_clkdm" },
> - { .clkdm_name = "wkup_clkdm" },
> - { NULL },
> -};
> -
> -/*
> - * 2430-only clockdomains
> - */
> -
> -static struct clockdomain mpu_2430_clkdm = {
> - .name = "mpu_clkdm",
> - .pwrdm = { .name = "mpu_pwrdm" },
> - .flags = CLKDM_CAN_HWSUP_SWSUP,
> - .wkdep_srcs = mpu_2430_wkdeps,
> - .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
> -};
> -
> -/* Another case of bit name collisions between several registers: EN_MDM */
> -static struct clockdomain mdm_clkdm = {
> - .name = "mdm_clkdm",
> - .pwrdm = { .name = "mdm_pwrdm" },
> - .flags = CLKDM_CAN_HWSUP_SWSUP,
> - .dep_bit = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
> - .wkdep_srcs = mdm_2430_wkdeps,
> - .clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
> -};
> -
> -static struct clockdomain dsp_2430_clkdm = {
> - .name = "dsp_clkdm",
> - .pwrdm = { .name = "dsp_pwrdm" },
> - .flags = CLKDM_CAN_HWSUP_SWSUP,
> - .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
> - .wkdep_srcs = dsp_24xx_wkdeps,
> - .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
> -};
> -
> -static struct clockdomain gfx_2430_clkdm = {
> - .name = "gfx_clkdm",
> - .pwrdm = { .name = "gfx_pwrdm" },
> - .flags = CLKDM_CAN_HWSUP_SWSUP,
> - .wkdep_srcs = gfx_24xx_wkdeps,
> - .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
> -};
> -
> -/*
> - * XXX add usecounting for clkdm dependencies, otherwise the presence
> - * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
> - * could cause trouble
> - */
> -static struct clockdomain core_l3_2430_clkdm = {
> - .name = "core_l3_clkdm",
> - .pwrdm = { .name = "core_pwrdm" },
> - .flags = CLKDM_CAN_HWSUP,
> - .dep_bit = OMAP24XX_EN_CORE_SHIFT,
> - .wkdep_srcs = core_2430_wkdeps,
> - .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
> -};
> -
> -/*
> - * XXX add usecounting for clkdm dependencies, otherwise the presence
> - * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
> - * could cause trouble
> - */
> -static struct clockdomain core_l4_2430_clkdm = {
> - .name = "core_l4_clkdm",
> - .pwrdm = { .name = "core_pwrdm" },
> - .flags = CLKDM_CAN_HWSUP,
> - .dep_bit = OMAP24XX_EN_CORE_SHIFT,
> - .wkdep_srcs = core_2430_wkdeps,
> - .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
> -};
> -
> -static struct clockdomain dss_2430_clkdm = {
> - .name = "dss_clkdm",
> - .pwrdm = { .name = "core_pwrdm" },
> - .flags = CLKDM_CAN_HWSUP,
> - .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
> -};
> -
> -static struct clockdomain *clockdomains_omap243x[] __initdata = {
> - &wkup_common_clkdm,
> - &mpu_2430_clkdm,
> - &mdm_clkdm,
> - &dsp_2430_clkdm,
> - &gfx_2430_clkdm,
> - &core_l3_2430_clkdm,
> - &core_l4_2430_clkdm,
> - &dss_2430_clkdm,
> - NULL,
> -};
> -
> -void __init omap243x_clockdomains_init(void)
> -{
> - if (!cpu_is_omap243x())
> - return;
> -
> - clkdm_register_platform_funcs(&omap2_clkdm_operations);
> - clkdm_register_clkdms(clockdomains_omap243x);
> - clkdm_complete_init();
> -}
> -
> diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
> index 220c22f5e0f5..4d20c2720660 100644
> --- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
> +++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
> @@ -8,7 +8,7 @@
> * Paul Walmsley, Jouni Högander
> *
> * This file contains clockdomains and clockdomain wakeup/sleep
> - * dependencies for the OMAP2/3 chips. Some notes:
> + * dependencies for the OMAP3 chips. Some notes:
> *
> * A useful validation rule for struct clockdomain: Any clockdomain
> * referenced by a wkdep_srcs or sleepdep_srcs array must have a
> @@ -16,8 +16,6 @@
> * software-controllable dependencies. Non-software-controllable
> * dependencies do exist, but they are not encoded below (yet).
> *
> - * 24xx does not support programmable sleep dependencies (SLEEPDEP)
> - *
> * The overly-specific dep_bit names are due to a bit name collision
> * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
> * value are the same for all powerdomains: 2
> @@ -39,10 +37,8 @@
> #include "clockdomain.h"
> #include "prm2xxx_3xxx.h"
> #include "cm2xxx_3xxx.h"
> -#include "cm-regbits-24xx.h"
> #include "cm-regbits-34xx.h"
> #include "cm-regbits-44xx.h"
> -#include "prm-regbits-24xx.h"
> #include "prm-regbits-34xx.h"
>
> /*
> @@ -54,29 +50,8 @@
>
> /* Wakeup dependency source arrays */
>
> -/* 2xxx-specific possible dependencies */
> -
> -/* 2xxx PM_WKDEP_GFX: CORE, MPU, WKUP */
> -struct clkdm_dep gfx_24xx_wkdeps[] = {
> - { .clkdm_name = "core_l3_clkdm" },
> - { .clkdm_name = "core_l4_clkdm" },
> - { .clkdm_name = "mpu_clkdm" },
> - { .clkdm_name = "wkup_clkdm" },
> - { NULL },
> -};
> -
> -/* 2xxx PM_WKDEP_DSP: CORE, MPU, WKUP */
> -struct clkdm_dep dsp_24xx_wkdeps[] = {
> - { .clkdm_name = "core_l3_clkdm" },
> - { .clkdm_name = "core_l4_clkdm" },
> - { .clkdm_name = "mpu_clkdm" },
> - { .clkdm_name = "wkup_clkdm" },
> - { NULL },
> -};
> -
> -
> /*
> - * OMAP2/3-common clockdomains
> + * OMAP3-common clockdomains
> *
> * Even though the 2420 has a single PRCM module from the
> * interconnect's perspective, internally it does appear to have
> diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h
> deleted file mode 100644
> index 59c14dbb6f87..000000000000
> --- a/arch/arm/mach-omap2/cm-regbits-24xx.h
> +++ /dev/null
> @@ -1,51 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_24XX_H
> -#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_24XX_H
> -
> -/*
> - * OMAP24XX Clock Management register bits
> - *
> - * Copyright (C) 2007 Texas Instruments, Inc.
> - * Copyright (C) 2007 Nokia Corporation
> - *
> - * Written by Paul Walmsley
> - */
> -
> -#define OMAP24XX_AUTOSTATE_MPU_MASK (1 << 0)
> -#define OMAP24XX_EN_DSS1_MASK (1 << 0)
> -#define OMAP24XX_ST_MAILBOXES_SHIFT 30
> -#define OMAP24XX_ST_HDQ_SHIFT 23
> -#define OMAP2420_ST_I2C2_SHIFT 20
> -#define OMAP2430_ST_I2CHS1_SHIFT 19
> -#define OMAP2420_ST_I2C1_SHIFT 19
> -#define OMAP2430_ST_I2CHS2_SHIFT 20
> -#define OMAP24XX_ST_MCBSP2_SHIFT 16
> -#define OMAP24XX_ST_MCBSP1_SHIFT 15
> -#define OMAP2430_ST_MCBSP5_SHIFT 5
> -#define OMAP2430_ST_MCBSP4_SHIFT 4
> -#define OMAP2430_ST_MCBSP3_SHIFT 3
> -#define OMAP24XX_ST_AES_SHIFT 3
> -#define OMAP24XX_ST_RNG_SHIFT 2
> -#define OMAP24XX_ST_SHA_SHIFT 1
> -#define OMAP24XX_CLKSEL_DSS2_MASK (0x1 << 13)
> -#define OMAP24XX_AUTOSTATE_DSS_MASK (1 << 2)
> -#define OMAP24XX_AUTOSTATE_L4_MASK (1 << 1)
> -#define OMAP24XX_AUTOSTATE_L3_MASK (1 << 0)
> -#define OMAP24XX_AUTOSTATE_GFX_MASK (1 << 0)
> -#define OMAP24XX_ST_MPU_WDT_SHIFT 3
> -#define OMAP24XX_ST_32KSYNC_SHIFT 1
> -#define OMAP24XX_EN_54M_PLL_SHIFT 6
> -#define OMAP24XX_EN_96M_PLL_SHIFT 2
> -#define OMAP24XX_ST_54M_APLL_SHIFT 9
> -#define OMAP24XX_ST_96M_APLL_SHIFT 8
> -#define OMAP24XX_AUTO_54M_MASK (0x3 << 6)
> -#define OMAP24XX_AUTO_96M_MASK (0x3 << 2)
> -#define OMAP24XX_AUTO_DPLL_SHIFT 0
> -#define OMAP24XX_AUTO_DPLL_MASK (0x3 << 0)
> -#define OMAP24XX_CORE_CLK_SRC_MASK (0x3 << 0)
> -#define OMAP2420_AUTOSTATE_IVA_MASK (1 << 8)
> -#define OMAP24XX_AUTOSTATE_DSP_MASK (1 << 0)
> -#define OMAP2430_AUTOSTATE_MDM_MASK (1 << 0)
> -#define OMAP24XX_CLKSTCTRL_DISABLE_AUTO 0x0
> -#define OMAP24XX_CLKSTCTRL_ENABLE_AUTO 0x1
> -#endif
> diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c
> deleted file mode 100644
> index 1c6d69f4bf49..000000000000
> --- a/arch/arm/mach-omap2/cm2xxx.c
> +++ /dev/null
> @@ -1,302 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * OMAP2xxx CM module functions
> - *
> - * Copyright (C) 2009 Nokia Corporation
> - * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc.
> - * Paul Walmsley
> - * Rajendra Nayak <rnayak@ti.com>
> - */
> -
> -#include <linux/kernel.h>
> -#include <linux/types.h>
> -#include <linux/delay.h>
> -#include <linux/errno.h>
> -#include <linux/err.h>
> -#include <linux/io.h>
> -
> -#include "prm2xxx.h"
> -#include "cm.h"
> -#include "cm2xxx.h"
> -#include "cm-regbits-24xx.h"
> -#include "clockdomain.h"
> -
> -/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
> -#define DPLL_AUTOIDLE_DISABLE 0x0
> -#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP 0x3
> -
> -/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */
> -#define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0
> -#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3
> -
> -/* CM_IDLEST_PLL bit value offset for APLLs (OMAP2xxx only) */
> -#define EN_APLL_LOCKED 3
> -
> -static const u8 omap2xxx_cm_idlest_offs[] = {
> - CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
> -};
> -
> -/*
> - *
> - */
> -
> -static void _write_clktrctrl(u8 c, s16 module, u32 mask)
> -{
> - u32 v;
> -
> - v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
> - v &= ~mask;
> - v |= c << __ffs(mask);
> - omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
> -}
> -
> -static bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
> -{
> - u32 v;
> -
> - v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
> - v &= mask;
> - v >>= __ffs(mask);
> -
> - return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
> -}
> -
> -static void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
> -{
> - _write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
> -}
> -
> -static void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
> -{
> - _write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
> -}
> -
> -/*
> - * DPLL autoidle control
> - */
> -
> -static void _omap2xxx_set_dpll_autoidle(u8 m)
> -{
> - u32 v;
> -
> - v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
> - v &= ~OMAP24XX_AUTO_DPLL_MASK;
> - v |= m << OMAP24XX_AUTO_DPLL_SHIFT;
> - omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
> -}
> -
> -void omap2xxx_cm_set_dpll_disable_autoidle(void)
> -{
> - _omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP);
> -}
> -
> -void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
> -{
> - _omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
> -}
> -
> -/**
> - * omap2xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components
> - * @idlest_reg: CM_IDLEST* virtual address
> - * @prcm_inst: pointer to an s16 to return the PRCM instance offset
> - * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID
> - *
> - * XXX This function is only needed until absolute register addresses are
> - * removed from the OMAP struct clk records.
> - */
> -static int omap2xxx_cm_split_idlest_reg(struct clk_omap_reg *idlest_reg,
> - s16 *prcm_inst,
> - u8 *idlest_reg_id)
> -{
> - unsigned long offs;
> - u8 idlest_offs;
> - int i;
> -
> - idlest_offs = idlest_reg->offset & 0xff;
> - for (i = 0; i < ARRAY_SIZE(omap2xxx_cm_idlest_offs); i++) {
> - if (idlest_offs == omap2xxx_cm_idlest_offs[i]) {
> - *idlest_reg_id = i + 1;
> - break;
> - }
> - }
> -
> - if (i == ARRAY_SIZE(omap2xxx_cm_idlest_offs))
> - return -EINVAL;
> -
> - offs = idlest_reg->offset;
> - offs &= 0xff00;
> - *prcm_inst = offs;
> -
> - return 0;
> -}
> -
> -/*
> - *
> - */
> -
> -/**
> - * omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby
> - * @part: PRCM partition, ignored for OMAP2
> - * @prcm_mod: PRCM module offset
> - * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
> - * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
> - *
> - * Wait for the PRCM to indicate that the module identified by
> - * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon
> - * success or -EBUSY if the module doesn't enable in time.
> - */
> -static int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
> - u8 idlest_shift)
> -{
> - int ena = 0, i = 0;
> - u8 cm_idlest_reg;
> - u32 mask;
> -
> - if (!idlest_id || (idlest_id > ARRAY_SIZE(omap2xxx_cm_idlest_offs)))
> - return -EINVAL;
> -
> - cm_idlest_reg = omap2xxx_cm_idlest_offs[idlest_id - 1];
> -
> - mask = 1 << idlest_shift;
> - ena = mask;
> -
> - omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) &
> - mask) == ena), MAX_MODULE_READY_TIME, i);
> -
> - return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
> -}
> -
> -/* Clockdomain low-level functions */
> -
> -static void omap2xxx_clkdm_allow_idle(struct clockdomain *clkdm)
> -{
> - omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
> - clkdm->clktrctrl_mask);
> -}
> -
> -static void omap2xxx_clkdm_deny_idle(struct clockdomain *clkdm)
> -{
> - omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
> - clkdm->clktrctrl_mask);
> -}
> -
> -static int omap2xxx_clkdm_clk_enable(struct clockdomain *clkdm)
> -{
> - bool hwsup = false;
> -
> - if (!clkdm->clktrctrl_mask)
> - return 0;
> -
> - hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
> - clkdm->clktrctrl_mask);
> - if (!hwsup && clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
> - omap2xxx_clkdm_wakeup(clkdm);
> -
> - return 0;
> -}
> -
> -static int omap2xxx_clkdm_clk_disable(struct clockdomain *clkdm)
> -{
> - bool hwsup = false;
> -
> - if (!clkdm->clktrctrl_mask)
> - return 0;
> -
> - hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
> - clkdm->clktrctrl_mask);
> -
> - if (!hwsup && clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
> - omap2xxx_clkdm_sleep(clkdm);
> -
> - return 0;
> -}
> -
> -struct clkdm_ops omap2_clkdm_operations = {
> - .clkdm_add_wkdep = omap2_clkdm_add_wkdep,
> - .clkdm_del_wkdep = omap2_clkdm_del_wkdep,
> - .clkdm_read_wkdep = omap2_clkdm_read_wkdep,
> - .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
> - .clkdm_sleep = omap2xxx_clkdm_sleep,
> - .clkdm_wakeup = omap2xxx_clkdm_wakeup,
> - .clkdm_allow_idle = omap2xxx_clkdm_allow_idle,
> - .clkdm_deny_idle = omap2xxx_clkdm_deny_idle,
> - .clkdm_clk_enable = omap2xxx_clkdm_clk_enable,
> - .clkdm_clk_disable = omap2xxx_clkdm_clk_disable,
> -};
> -
> -int omap2xxx_cm_fclks_active(void)
> -{
> - u32 f1, f2;
> -
> - f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
> - f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
> -
> - return (f1 | f2) ? 1 : 0;
> -}
> -
> -int omap2xxx_cm_mpu_retention_allowed(void)
> -{
> - u32 l;
> -
> - /* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
> - l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
> - if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK |
> - OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK |
> - OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK))
> - return 0;
> - /* Check for UART3. */
> - l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
> - if (l & OMAP24XX_EN_UART3_MASK)
> - return 0;
> -
> - return 1;
> -}
> -
> -u32 omap2xxx_cm_get_core_clk_src(void)
> -{
> - u32 v;
> -
> - v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
> - v &= OMAP24XX_CORE_CLK_SRC_MASK;
> -
> - return v;
> -}
> -
> -u32 omap2xxx_cm_get_core_pll_config(void)
> -{
> - return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
> -}
> -
> -void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm)
> -{
> - u32 tmp;
> -
> - omap2_cm_write_mod_reg(mpu, MPU_MOD, CM_CLKSEL);
> - omap2_cm_write_mod_reg(dsp, OMAP24XX_DSP_MOD, CM_CLKSEL);
> - omap2_cm_write_mod_reg(gfx, GFX_MOD, CM_CLKSEL);
> - tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) &
> - OMAP24XX_CLKSEL_DSS2_MASK;
> - omap2_cm_write_mod_reg(core | tmp, CORE_MOD, CM_CLKSEL1);
> - if (mdm)
> - omap2_cm_write_mod_reg(mdm, OMAP2430_MDM_MOD, CM_CLKSEL);
> -}
> -
> -/*
> - *
> - */
> -
> -static const struct cm_ll_data omap2xxx_cm_ll_data = {
> - .split_idlest_reg = &omap2xxx_cm_split_idlest_reg,
> - .wait_module_ready = &omap2xxx_cm_wait_module_ready,
> -};
> -
> -int __init omap2xxx_cm_init(const struct omap_prcm_init_data *data)
> -{
> - return cm_register(&omap2xxx_cm_ll_data);
> -}
> -
> -static void __exit omap2xxx_cm_exit(void)
> -{
> - cm_unregister(&omap2xxx_cm_ll_data);
> -}
> -__exitcall(omap2xxx_cm_exit);
> diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h
> deleted file mode 100644
> index 7cbeff15ffb0..000000000000
> --- a/arch/arm/mach-omap2/cm2xxx.h
> +++ /dev/null
> @@ -1,60 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * OMAP2xxx Clock Management (CM) register definitions
> - *
> - * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc.
> - * Copyright (C) 2007-2010 Nokia Corporation
> - * Paul Walmsley
> - *
> - * The CM hardware modules on the OMAP2/3 are quite similar to each
> - * other. The CM modules/instances on OMAP4 are quite different, so
> - * they are handled in a separate file.
> - */
> -#ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_H
> -#define __ARCH_ASM_MACH_OMAP2_CM2XXX_H
> -
> -#include "prcm-common.h"
> -#include "cm2xxx_3xxx.h"
> -
> -#define OMAP2420_CM_REGADDR(module, reg) \
> - OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
> -#define OMAP2430_CM_REGADDR(module, reg) \
> - OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
> -
> -/*
> - * Module specific CM register offsets from CM_BASE + domain offset
> - * Use cm_{read,write}_mod_reg() with these registers.
> - * These register offsets generally appear in more than one PRCM submodule.
> - */
> -
> -/* OMAP2-specific register offsets */
> -
> -#define OMAP24XX_CM_FCLKEN2 0x0004
> -#define OMAP24XX_CM_ICLKEN4 0x001c
> -#define OMAP24XX_CM_AUTOIDLE4 0x003c
> -#define OMAP24XX_CM_IDLEST4 0x002c
> -
> -/* CM_IDLEST bit field values to indicate deasserted IdleReq */
> -
> -#define OMAP24XX_CM_IDLEST_VAL 0
> -
> -
> -/* Clock management domain register get/set */
> -
> -#ifndef __ASSEMBLER__
> -
> -extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
> -extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
> -
> -extern int omap2xxx_cm_fclks_active(void);
> -extern int omap2xxx_cm_mpu_retention_allowed(void);
> -extern u32 omap2xxx_cm_get_core_clk_src(void);
> -extern u32 omap2xxx_cm_get_core_pll_config(void);
> -extern void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core,
> - u32 mdm);
> -
> -int __init omap2xxx_cm_init(const struct omap_prcm_init_data *data);
> -
> -#endif
> -
> -#endif
> diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c
> index 87f2c2d2d754..fc16cd1fd2d5 100644
> --- a/arch/arm/mach-omap2/cm_common.c
> +++ b/arch/arm/mach-omap2/cm_common.c
> @@ -15,7 +15,6 @@
> #include <linux/of.h>
> #include <linux/of_address.h>
>
> -#include "cm2xxx.h"
> #include "cm3xxx.h"
> #include "cm33xx.h"
> #include "cm44xx.h"
> @@ -230,14 +229,6 @@ static struct omap_prcm_init_data cm2_data __initdata = {
> };
> #endif
>
> -#ifdef CONFIG_ARCH_OMAP2
> -static struct omap_prcm_init_data omap2_prcm_data __initdata = {
> - .index = TI_CLKM_CM,
> - .init = omap2xxx_cm_init,
> - .flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE,
> -};
> -#endif
> -
> #ifdef CONFIG_ARCH_OMAP3
> static struct omap_prcm_init_data omap3_cm_data __initdata = {
> .index = TI_CLKM_CM,
> @@ -269,9 +260,6 @@ static struct omap_prcm_init_data am4_prcm_data __initdata = {
> #endif
>
> static const struct of_device_id omap_cm_dt_match_table[] __initconst = {
> -#ifdef CONFIG_ARCH_OMAP2
> - { .compatible = "ti,omap2-prcm", .data = &omap2_prcm_data },
> -#endif
> #ifdef CONFIG_ARCH_OMAP3
> { .compatible = "ti,omap3-cm", .data = &omap3_cm_data },
> #endif
> diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
> deleted file mode 100644
> index 69694af71475..000000000000
> --- a/arch/arm/mach-omap2/common-board-devices.h
> +++ /dev/null
> @@ -1,11 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -#ifndef __OMAP_COMMON_BOARD_DEVICES__
> -#define __OMAP_COMMON_BOARD_DEVICES__
> -
> -#include <linux/mfd/menelaus.h>
> -
> -void *n8x0_legacy_init(void);
> -
> -extern struct menelaus_platform_data n8x0_menelaus_platform_data;
> -
> -#endif /* __OMAP_COMMON_BOARD_DEVICES__ */
> diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
> index 9d60799e9752..f8ed97044ade 100644
> --- a/arch/arm/mach-omap2/common.h
> +++ b/arch/arm/mach-omap2/common.h
> @@ -102,8 +102,6 @@ static inline void omap5_realtime_timer_init(void)
> }
> #endif
>
> -void omap2420_init_early(void);
> -void omap2430_init_early(void);
> void omap3430_init_early(void);
> void omap3630_init_early(void);
> void am33xx_init_early(void);
> @@ -130,14 +128,6 @@ static inline void omap_soc_device_init(void)
> }
> #endif
>
> -#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
> -void omap2xxx_restart(enum reboot_mode mode, const char *cmd);
> -#else
> -static inline void omap2xxx_restart(enum reboot_mode mode, const char *cmd)
> -{
> -}
> -#endif
> -
> #ifdef CONFIG_SOC_AM33XX
> void am33xx_restart(enum reboot_mode mode, const char *cmd);
> #else
> @@ -183,8 +173,6 @@ static inline void omap_barrier_reserve_memblock(void)
> /* This gets called from mach-omap2/io.c, do not call this */
> void __init omap2_set_globals_tap(u32 class, void __iomem *tap);
>
> -void __init omap242x_map_io(void);
> -void __init omap243x_map_io(void);
> void __init omap3_map_io(void);
> void __init am33xx_map_io(void);
> void __init omap4_map_io(void);
> diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
> index 7e7440533bf9..3ab1c6e6dde6 100644
> --- a/arch/arm/mach-omap2/control.h
> +++ b/arch/arm/mach-omap2/control.h
> @@ -19,19 +19,11 @@
> #include "am33xx.h"
>
> #ifndef __ASSEMBLY__
> -#define OMAP242X_CTRL_REGADDR(reg) \
> - OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
> -#define OMAP243X_CTRL_REGADDR(reg) \
> - OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
> #define OMAP343X_CTRL_REGADDR(reg) \
> OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
> #define AM33XX_CTRL_REGADDR(reg) \
> AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg))
> #else
> -#define OMAP242X_CTRL_REGADDR(reg) \
> - OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
> -#define OMAP243X_CTRL_REGADDR(reg) \
> - OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
> #define OMAP343X_CTRL_REGADDR(reg) \
> OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
> #define AM33XX_CTRL_REGADDR(reg) \
> @@ -74,52 +66,6 @@
> #define OMAP2_CONTROL_RPUB_KEY_H_2 (OMAP2_CONTROL_GENERAL + 0x0098)
> #define OMAP2_CONTROL_RPUB_KEY_H_3 (OMAP2_CONTROL_GENERAL + 0x009c)
>
> -/* 242x-only CONTROL_GENERAL register offsets */
> -#define OMAP242X_CONTROL_DEVCONF OMAP2_CONTROL_DEVCONF0 /* match TRM */
> -#define OMAP242X_CONTROL_OCM_RAM_PERM (OMAP2_CONTROL_GENERAL + 0x0068)
> -
> -/* 243x-only CONTROL_GENERAL register offsets */
> -/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */
> -#define OMAP243X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0078)
> -#define OMAP243X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x007c)
> -#define OMAP243X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
> -#define OMAP243X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
> -#define OMAP243X_CONTROL_IVA2_GEMCFG (OMAP2_CONTROL_GENERAL + 0x0198)
> -#define OMAP243X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x0230)
> -
> -/* 24xx-only CONTROL_GENERAL register offsets */
> -#define OMAP24XX_CONTROL_DEBOBS (OMAP2_CONTROL_GENERAL + 0x0000)
> -#define OMAP24XX_CONTROL_EMU_SUPPORT (OMAP2_CONTROL_GENERAL + 0x0008)
> -#define OMAP24XX_CONTROL_SEC_TEST (OMAP2_CONTROL_GENERAL + 0x0044)
> -#define OMAP24XX_CONTROL_PSA_CTRL (OMAP2_CONTROL_GENERAL + 0x0048)
> -#define OMAP24XX_CONTROL_PSA_CMD (OMAP2_CONTROL_GENERAL + 0x004c)
> -#define OMAP24XX_CONTROL_PSA_VALUE (OMAP2_CONTROL_GENERAL + 0x0050)
> -#define OMAP24XX_CONTROL_SEC_EMU (OMAP2_CONTROL_GENERAL + 0x0060)
> -#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064)
> -#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c)
> -#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070)
> -#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074)
> -#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080)
> -#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084)
> -#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088)
> -#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c)
> -#define OMAP24XX_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a0)
> -#define OMAP24XX_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00a4)
> -#define OMAP24XX_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00a8)
> -#define OMAP24XX_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00ac)
> -#define OMAP24XX_CONTROL_CUST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00b0)
> -#define OMAP24XX_CONTROL_CUST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00b4)
> -#define OMAP24XX_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c0)
> -#define OMAP24XX_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00c4)
> -#define OMAP24XX_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00c8)
> -#define OMAP24XX_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00cc)
> -#define OMAP24XX_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d0)
> -#define OMAP24XX_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00d4)
> -#define OMAP24XX_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00d8)
> -#define OMAP24XX_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00dc)
> -#define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0)
> -#define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4)
> -
> #define OMAP343X_CONTROL_PADCONF_SYSNIRQ (OMAP2_CONTROL_INTERFACE + 0x01b0)
>
> /* 34xx-only CONTROL_GENERAL register offsets */
> @@ -311,14 +257,12 @@
> */
> /* CONTROL_DEVCONF0 bits */
> #define OMAP2_MMCSDIO1ADPCLKISEL (1 << 24) /* MMC1 loop back clock */
> -#define OMAP24XX_USBSTANDBYCTRL (1 << 15)
> #define OMAP2_MCBSP2_CLKS_MASK (1 << 6)
> #define OMAP2_MCBSP1_FSR_MASK (1 << 4)
> #define OMAP2_MCBSP1_CLKR_MASK (1 << 3)
> #define OMAP2_MCBSP1_CLKS_MASK (1 << 2)
>
> /* CONTROL_DEVCONF1 bits */
> -#define OMAP243X_MMC1_ACTIVE_OVERWRITE (1 << 31)
> #define OMAP2_MMCSDIO2ADPCLKISEL (1 << 6) /* MMC2 loop back clock */
> #define OMAP2_MCBSP5_CLKS_MASK (1 << 4) /* > 242x */
> #define OMAP2_MCBSP4_CLKS_MASK (1 << 2) /* > 242x */
> diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
> index dbec3bb9fbf4..addc14898bd5 100644
> --- a/arch/arm/mach-omap2/display.c
> +++ b/arch/arm/mach-omap2/display.c
> @@ -124,9 +124,7 @@ static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
>
> static enum omapdss_version __init omap_display_get_version(void)
> {
> - if (cpu_is_omap24xx())
> - return OMAPDSS_VER_OMAP24xx;
> - else if (cpu_is_omap3630())
> + if (cpu_is_omap3630())
> return OMAPDSS_VER_OMAP3630;
> else if (cpu_is_omap34xx()) {
> if (soc_is_am35xx()) {
> diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
> index 830cd4e7eb44..3a6b7b4620ca 100644
> --- a/arch/arm/mach-omap2/dma.c
> +++ b/arch/arm/mach-omap2/dma.c
> @@ -82,39 +82,6 @@ static unsigned configure_dma_errata(void)
> {
> unsigned errata = 0;
>
> - /*
> - * Errata applicable for OMAP2430ES1.0 and all omap2420
> - *
> - * I.
> - * Erratum ID: Not Available
> - * Inter Frame DMA buffering issue DMA will wrongly
> - * buffer elements if packing and bursting is enabled. This might
> - * result in data gets stalled in FIFO at the end of the block.
> - * Workaround: DMA channels must have BUFFERING_DISABLED bit set to
> - * guarantee no data will stay in the DMA FIFO in case inter frame
> - * buffering occurs
> - *
> - * II.
> - * Erratum ID: Not Available
> - * DMA may hang when several channels are used in parallel
> - * In the following configuration, DMA channel hanging can occur:
> - * a. Channel i, hardware synchronized, is enabled
> - * b. Another channel (Channel x), software synchronized, is enabled.
> - * c. Channel i is disabled before end of transfer
> - * d. Channel i is reenabled.
> - * e. Steps 1 to 4 are repeated a certain number of times.
> - * f. A third channel (Channel y), software synchronized, is enabled.
> - * Channel x and Channel y may hang immediately after step 'f'.
> - * Workaround:
> - * For any channel used - make sure NextLCH_ID is set to the value j.
> - */
> - if (cpu_is_omap2420() || (cpu_is_omap2430() &&
> - (omap_type() == OMAP2430_REV_ES1_0))) {
> -
> - SET_DMA_ERRATA(DMA_ERRATA_IFRAME_BUFFERING);
> - SET_DMA_ERRATA(DMA_ERRATA_PARALLEL_CHANNELS);
> - }
> -
> /*
> * Erratum ID: i378: OMAP2+: sDMA Channel is not disabled
> * after a transaction error.
> @@ -162,16 +129,6 @@ static unsigned configure_dma_errata(void)
> return errata;
> }
>
> -static const struct dma_slave_map omap24xx_sdma_dt_map[] = {
> - /* external DMA requests when tusb6010 is used */
> - { "musb-hdrc.1.auto", "dmareq0", SDMA_FILTER_PARAM(2) },
> - { "musb-hdrc.1.auto", "dmareq1", SDMA_FILTER_PARAM(3) },
> - { "musb-hdrc.1.auto", "dmareq2", SDMA_FILTER_PARAM(14) }, /* OMAP2420 only */
> - { "musb-hdrc.1.auto", "dmareq3", SDMA_FILTER_PARAM(15) }, /* OMAP2420 only */
> - { "musb-hdrc.1.auto", "dmareq4", SDMA_FILTER_PARAM(16) }, /* OMAP2420 only */
> - { "musb-hdrc.1.auto", "dmareq5", SDMA_FILTER_PARAM(64) }, /* OMAP2420 only */
> -};
> -
> static struct omap_dma_dev_attr dma_attr = {
> .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
> IS_CSSA_32 | IS_CDSA_32,
> @@ -188,15 +145,7 @@ struct omap_system_dma_plat_info dma_plat_info = {
> static int __init omap2_system_dma_init(void)
> {
> dma_plat_info.errata = configure_dma_errata();
> -
> - if (soc_is_omap24xx()) {
> - /* DMA slave map for drivers not yet converted to DT */
> - dma_plat_info.slave_map = omap24xx_sdma_dt_map;
> - dma_plat_info.slavecnt = ARRAY_SIZE(omap24xx_sdma_dt_map);
> - }
> -
> - if (!soc_is_omap242x())
> - dma_attr.dev_caps |= IS_RW_PRIORITY;
> + dma_attr.dev_caps |= IS_RW_PRIORITY;
>
> if (soc_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
> dma_attr.dev_caps |= HS_CHANNELS_RESERVED;
> diff --git a/arch/arm/mach-omap2/fb.c b/arch/arm/mach-omap2/fb.c
> index 0f8c8efe3ae8..9a425c36f996 100644
> --- a/arch/arm/mach-omap2/fb.c
> +++ b/arch/arm/mach-omap2/fb.c
> @@ -27,15 +27,6 @@
> * The first memory resource is the register region for VRFB,
> * the rest are VRFB virtual memory areas for each VRFB context.
> */
> -
> -static const struct resource omap2_vrfb_resources[] = {
> - DEFINE_RES_MEM_NAMED(0x68008000u, 0x40, "vrfb-regs"),
> - DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"),
> - DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"),
> - DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"),
> - DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"),
> -};
> -
> static const struct resource omap3_vrfb_resources[] = {
> DEFINE_RES_MEM_NAMED(0x6C000180u, 0xc0, "vrfb-regs"),
> DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"),
> @@ -58,10 +49,7 @@ int __init omap_init_vrfb(void)
> const struct resource *res;
> unsigned int num_res;
>
> - if (cpu_is_omap24xx()) {
> - res = omap2_vrfb_resources;
> - num_res = ARRAY_SIZE(omap2_vrfb_resources);
> - } else if (cpu_is_omap34xx()) {
> + if (cpu_is_omap34xx()) {
> res = omap3_vrfb_resources;
> num_res = ARRAY_SIZE(omap3_vrfb_resources);
> } else {
> diff --git a/arch/arm/mach-omap2/gpmc.h b/arch/arm/mach-omap2/gpmc.h
> deleted file mode 100644
> index e060f1b5c27d..000000000000
> --- a/arch/arm/mach-omap2/gpmc.h
> +++ /dev/null
> @@ -1,10 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * General-Purpose Memory Controller for OMAP2
> - *
> - * Copyright (C) 2005-2006 Nokia Corporation
> - *
> - * Do not include this file in any new code, this will get removed
> - * once omap3 boots in device tree only mode.
> - */
> -#include <linux/omap-gpmc.h>
> diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
> index 3b4b9514f4fa..d956c70f8899 100644
> --- a/arch/arm/mach-omap2/i2c.c
> +++ b/arch/arm/mach-omap2/i2c.c
> @@ -39,7 +39,7 @@ int omap_i2c_reset(struct omap_hwmod *oh)
> u16 i2c_con;
> int c = 0;
>
> - if (soc_is_omap24xx() || soc_is_omap34xx() || soc_is_am35xx())
> + if (soc_is_omap34xx() || soc_is_am35xx())
> i2c_con = OMAP2_I2C_CON_OFFSET;
> else
> i2c_con = OMAP4_I2C_CON_OFFSET;
> diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
> index cf2bfb447ee2..3e731dd21311 100644
> --- a/arch/arm/mach-omap2/id.c
> +++ b/arch/arm/mach-omap2/id.c
> @@ -55,9 +55,7 @@ int omap_type(void)
> if (val < OMAP2_DEVICETYPE_MASK)
> return val;
>
> - if (soc_is_omap24xx()) {
> - val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
> - } else if (soc_is_ti81xx()) {
> + if (soc_is_ti81xx()) {
> val = omap_ctrl_readl(TI81XX_CONTROL_STATUS);
> } else if (soc_is_am33xx() || soc_is_am43xx()) {
> val = omap_ctrl_readl(AM33XX_CONTROL_STATUS);
> @@ -99,22 +97,6 @@ EXPORT_SYMBOL(omap_type);
>
> #define read_tap_reg(reg) readl_relaxed(tap_base + (reg))
>
> -struct omap_id {
> - u16 hawkeye; /* Silicon type (Hawkeye id) */
> - u8 dev; /* Device type from production_id reg */
> - u32 type; /* Combined type id copied to omap_revision */
> -};
> -
> -/* Register values to detect the OMAP version */
> -static struct omap_id omap_ids[] __initdata = {
> - { .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200024 },
> - { .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201024 },
> - { .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202024 },
> - { .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220024 },
> - { .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230024 },
> - { .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300024 },
> -};
> -
> static void __iomem *tap_base;
> static u16 tap_prod_id;
>
> @@ -145,62 +127,6 @@ static int __init omap_feed_randpool(void)
> }
> omap_device_initcall(omap_feed_randpool);
>
> -void __init omap2xxx_check_revision(void)
> -{
> - int i, j;
> - u32 idcode, prod_id;
> - u16 hawkeye;
> - u8 dev_type, rev;
> - struct omap_die_id odi;
> -
> - idcode = read_tap_reg(OMAP_TAP_IDCODE);
> - prod_id = read_tap_reg(tap_prod_id);
> - hawkeye = (idcode >> 12) & 0xffff;
> - rev = (idcode >> 28) & 0x0f;
> - dev_type = (prod_id >> 16) & 0x0f;
> - omap_get_die_id(&odi);
> -
> - pr_debug("OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
> - idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
> - pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n", odi.id_0);
> - pr_debug("OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
> - odi.id_1, (odi.id_1 >> 28) & 0xf);
> - pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n", odi.id_2);
> - pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n", odi.id_3);
> - pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
> - prod_id, dev_type);
> -
> - /* Check hawkeye ids */
> - for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
> - if (hawkeye == omap_ids[i].hawkeye)
> - break;
> - }
> -
> - if (i == ARRAY_SIZE(omap_ids)) {
> - printk(KERN_ERR "Unknown OMAP CPU id\n");
> - return;
> - }
> -
> - for (j = i; j < ARRAY_SIZE(omap_ids); j++) {
> - if (dev_type == omap_ids[j].dev)
> - break;
> - }
> -
> - if (j == ARRAY_SIZE(omap_ids)) {
> - pr_err("Unknown OMAP device type. Handling it as OMAP%04x\n",
> - omap_ids[i].type >> 16);
> - j = i;
> - }
> -
> - sprintf(soc_name, "OMAP%04x", omap_rev() >> 16);
> - sprintf(soc_rev, "ES%x", (omap_rev() >> 12) & 0xf);
> -
> - pr_info("%s", soc_name);
> - if ((omap_rev() >> 8) & 0x0f)
> - pr_cont("%s", soc_rev);
> - pr_cont("\n");
> -}
> -
> #define OMAP3_SHOW_FEATURE(feat) \
> if (omap3_has_ ##feat()) \
> n += scnprintf(buf + n, sizeof(buf) - n, #feat " ");
> @@ -750,9 +676,7 @@ static const char * const omap_types[] = {
>
> static const char * __init omap_get_family(void)
> {
> - if (soc_is_omap24xx())
> - return kasprintf(GFP_KERNEL, "OMAP2");
> - else if (soc_is_omap34xx())
> + if (soc_is_omap34xx())
> return kasprintf(GFP_KERNEL, "OMAP3");
> else if (soc_is_omap44xx())
> return kasprintf(GFP_KERNEL, "OMAP4");
> diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
> index 14ec3f78000b..1c945be5e7cc 100644
> --- a/arch/arm/mach-omap2/io.c
> +++ b/arch/arm/mach-omap2/io.c
> @@ -35,7 +35,6 @@
> #include "sdrc.h"
> #include "control.h"
> #include "sram.h"
> -#include "cm2xxx.h"
> #include "cm3xxx.h"
> #include "cm33xx.h"
> #include "cm44xx.h"
> @@ -43,11 +42,9 @@
> #include "cm.h"
> #include "prcm_mpu44xx.h"
> #include "prminst44xx.h"
> -#include "prm2xxx.h"
> #include "prm3xxx.h"
> #include "prm33xx.h"
> #include "prm44xx.h"
> -#include "opp2xxx.h"
> #include "omap-secure.h"
>
> /*
> @@ -61,76 +58,6 @@ static int (*omap_clk_soc_init)(void);
> * default mapping provided here.
> */
>
> -#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
> -static struct map_desc omap24xx_io_desc[] __initdata = {
> - {
> - .virtual = L3_24XX_VIRT,
> - .pfn = __phys_to_pfn(L3_24XX_PHYS),
> - .length = L3_24XX_SIZE,
> - .type = MT_DEVICE
> - },
> - {
> - .virtual = L4_24XX_VIRT,
> - .pfn = __phys_to_pfn(L4_24XX_PHYS),
> - .length = L4_24XX_SIZE,
> - .type = MT_DEVICE
> - },
> -};
> -
> -#ifdef CONFIG_SOC_OMAP2420
> -static struct map_desc omap242x_io_desc[] __initdata = {
> - {
> - .virtual = DSP_MEM_2420_VIRT,
> - .pfn = __phys_to_pfn(DSP_MEM_2420_PHYS),
> - .length = DSP_MEM_2420_SIZE,
> - .type = MT_DEVICE
> - },
> - {
> - .virtual = DSP_IPI_2420_VIRT,
> - .pfn = __phys_to_pfn(DSP_IPI_2420_PHYS),
> - .length = DSP_IPI_2420_SIZE,
> - .type = MT_DEVICE
> - },
> - {
> - .virtual = DSP_MMU_2420_VIRT,
> - .pfn = __phys_to_pfn(DSP_MMU_2420_PHYS),
> - .length = DSP_MMU_2420_SIZE,
> - .type = MT_DEVICE
> - },
> -};
> -
> -#endif
> -
> -#ifdef CONFIG_SOC_OMAP2430
> -static struct map_desc omap243x_io_desc[] __initdata = {
> - {
> - .virtual = L4_WK_243X_VIRT,
> - .pfn = __phys_to_pfn(L4_WK_243X_PHYS),
> - .length = L4_WK_243X_SIZE,
> - .type = MT_DEVICE
> - },
> - {
> - .virtual = OMAP243X_GPMC_VIRT,
> - .pfn = __phys_to_pfn(OMAP243X_GPMC_PHYS),
> - .length = OMAP243X_GPMC_SIZE,
> - .type = MT_DEVICE
> - },
> - {
> - .virtual = OMAP243X_SDRC_VIRT,
> - .pfn = __phys_to_pfn(OMAP243X_SDRC_PHYS),
> - .length = OMAP243X_SDRC_SIZE,
> - .type = MT_DEVICE
> - },
> - {
> - .virtual = OMAP243X_SMS_VIRT,
> - .pfn = __phys_to_pfn(OMAP243X_SMS_PHYS),
> - .length = OMAP243X_SMS_SIZE,
> - .type = MT_DEVICE
> - },
> -};
> -#endif
> -#endif
> -
> #ifdef CONFIG_ARCH_OMAP3
> static struct map_desc omap34xx_io_desc[] __initdata = {
> {
> @@ -305,22 +232,6 @@ static struct map_desc dra7xx_io_desc[] __initdata = {
> };
> #endif
>
> -#ifdef CONFIG_SOC_OMAP2420
> -void __init omap242x_map_io(void)
> -{
> - iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
> - iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
> -}
> -#endif
> -
> -#ifdef CONFIG_SOC_OMAP2430
> -void __init omap243x_map_io(void)
> -{
> - iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
> - iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
> -}
> -#endif
> -
> #ifdef CONFIG_ARCH_OMAP3
> void __init omap3_map_io(void)
> {
> @@ -365,6 +276,8 @@ void __init dra7xx_map_io(void)
> omap_barriers_init();
> }
> #endif
> +
> +#ifdef CONFIG_ARCH_OMAP3
> /*
> * omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
> *
> @@ -399,7 +312,6 @@ static int __init _omap2_init_reprogram_sdrc(void)
> return v;
> }
>
> -#ifdef CONFIG_OMAP_HWMOD
> static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
> {
> return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
> @@ -412,55 +324,11 @@ static void __init __maybe_unused omap_hwmod_init_postsetup(void)
> /* Set the default postsetup state for all hwmods */
> omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state);
> }
> -#else
> -static inline void omap_hwmod_init_postsetup(void)
> -{
> -}
> -#endif
> -
> -#ifdef CONFIG_SOC_OMAP2420
> -void __init omap2420_init_early(void)
> -{
> - omap2_set_globals_tap(OMAP242X_CLASS, OMAP2_L4_IO_ADDRESS(0x48014000));
> - omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
> - OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE));
> - omap2_control_base_init();
> - omap2xxx_check_revision();
> - omap2_prcm_base_init();
> - omap2xxx_voltagedomains_init();
> - omap242x_powerdomains_init();
> - omap242x_clockdomains_init();
> - omap2420_hwmod_init();
> - omap_hwmod_init_postsetup();
> - omap_clk_soc_init = omap2420_dt_clk_init;
> - rate_table = omap2420_rate_table;
> -}
> -#endif
> -
> -#ifdef CONFIG_SOC_OMAP2430
> -void __init omap2430_init_early(void)
> -{
> - omap2_set_globals_tap(OMAP243X_CLASS, OMAP2_L4_IO_ADDRESS(0x4900a000));
> - omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
> - OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE));
> - omap2_control_base_init();
> - omap2xxx_check_revision();
> - omap2_prcm_base_init();
> - omap2xxx_voltagedomains_init();
> - omap243x_powerdomains_init();
> - omap243x_clockdomains_init();
> - omap2430_hwmod_init();
> - omap_hwmod_init_postsetup();
> - omap_clk_soc_init = omap2430_dt_clk_init;
> - rate_table = omap2430_rate_table;
> -}
> -#endif
>
> /*
> * Currently only board-omap3beagle.c should call this because of the
> * same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
> */
> -#ifdef CONFIG_ARCH_OMAP3
> static void __init omap3_init_early(void)
> {
> omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000));
> @@ -661,16 +529,18 @@ void __init dra7xx_init_late(void)
> #endif
>
>
> +#ifdef CONFIG_ARCH_OMAP3
> void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
> struct omap_sdrc_params *sdrc_cs1)
> {
> omap_sram_init();
>
> - if (cpu_is_omap24xx() || omap3_has_sdrc()) {
> + if (omap3_has_sdrc()) {
> omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
> _omap2_init_reprogram_sdrc();
> }
> }
> +#endif
>
> int __init omap_clk_init(void)
> {
> diff --git a/arch/arm/mach-omap2/iomap.h b/arch/arm/mach-omap2/iomap.h
> index 6191d244438a..403444bb6924 100644
> --- a/arch/arm/mach-omap2/iomap.h
> +++ b/arch/arm/mach-omap2/iomap.h
> @@ -48,52 +48,6 @@
> #define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */
> #define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
>
> -/*
> - * ----------------------------------------------------------------------------
> - * Omap2 specific IO mapping
> - * ----------------------------------------------------------------------------
> - */
> -
> -/* We map both L3 and L4 on OMAP2 */
> -#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/
> -#define L3_24XX_VIRT (L3_24XX_PHYS + OMAP2_L3_IO_OFFSET)
> -#define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
> -#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */
> -#define L4_24XX_VIRT (L4_24XX_PHYS + OMAP2_L4_IO_OFFSET)
> -#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */
> -
> -#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */
> -#define L4_WK_243X_VIRT (L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET)
> -#define L4_WK_243X_SIZE SZ_1M
> -#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE
> -#define OMAP243X_GPMC_VIRT (OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
> - /* 0x6e000000 --> 0xfe000000 */
> -#define OMAP243X_GPMC_SIZE SZ_1M
> -#define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE
> - /* 0x6D000000 --> 0xfd000000 */
> -#define OMAP243X_SDRC_VIRT (OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
> -#define OMAP243X_SDRC_SIZE SZ_1M
> -#define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE
> - /* 0x6c000000 --> 0xfc000000 */
> -#define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
> -#define OMAP243X_SMS_SIZE SZ_1M
> -
> -/* 2420 IVA */
> -#define DSP_MEM_2420_PHYS OMAP2420_DSP_MEM_BASE
> - /* 0x58000000 --> 0xfc100000 */
> -#define DSP_MEM_2420_VIRT 0xfc100000
> -#define DSP_MEM_2420_SIZE 0x28000
> -#define DSP_IPI_2420_PHYS OMAP2420_DSP_IPI_BASE
> - /* 0x59000000 --> 0xfc128000 */
> -#define DSP_IPI_2420_VIRT 0xfc128000
> -#define DSP_IPI_2420_SIZE SZ_4K
> -#define DSP_MMU_2420_PHYS OMAP2420_DSP_MMU_BASE
> - /* 0x5a000000 --> 0xfc129000 */
> -#define DSP_MMU_2420_VIRT 0xfc129000
> -#define DSP_MMU_2420_SIZE SZ_4K
> -
> -/* 2430 IVA2.1 - currently unmapped */
> -
> /*
> * ----------------------------------------------------------------------------
> * Omap3 specific IO mapping
> diff --git a/arch/arm/mach-omap2/l3_2xxx.h b/arch/arm/mach-omap2/l3_2xxx.h
> deleted file mode 100644
> index 6297c62428ac..000000000000
> --- a/arch/arm/mach-omap2/l3_2xxx.h
> +++ /dev/null
> @@ -1,15 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-or-later */
> -/*
> - * arch/arm/plat-omap/include/plat/l3_2xxx.h - L3 firewall definitions
> - *
> - * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
> - * Sumit Semwal
> - */
> -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
> -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
> -
> -/* L3 CONNIDs */
> -/* Display Sub system (DSS) */
> -#define OMAP2_L3_CORE_FW_CONNID_DSS 8
> -
> -#endif
> diff --git a/arch/arm/mach-omap2/l4_2xxx.h b/arch/arm/mach-omap2/l4_2xxx.h
> deleted file mode 100644
> index 418e1072d730..000000000000
> --- a/arch/arm/mach-omap2/l4_2xxx.h
> +++ /dev/null
> @@ -1,19 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-or-later */
> -/*
> - * arch/arm/plat-omap/include/plat/l4_2xxx.h - L4 firewall definitions
> - *
> - * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
> - * Sumit Semwal
> - */
> -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
> -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
> -
> -/* L4 CORE */
> -/* Display Sub system (DSS) */
> -#define OMAP2420_L4_CORE_FW_DSS_CORE_REGION 28
> -#define OMAP2420_L4_CORE_FW_DSS_DISPC_REGION 29
> -#define OMAP2420_L4_CORE_FW_DSS_RFBI_REGION 30
> -#define OMAP2420_L4_CORE_FW_DSS_VENC_REGION 31
> -#define OMAP2420_L4_CORE_FW_DSS_TA_REGION 32
> -
> -#endif
> diff --git a/arch/arm/mach-omap2/mmc.h b/arch/arm/mach-omap2/mmc.h
> deleted file mode 100644
> index b5533e93cb63..000000000000
> --- a/arch/arm/mach-omap2/mmc.h
> +++ /dev/null
> @@ -1,18 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -
> -#define OMAP24XX_NR_MMC 2
> -#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE
> -#define OMAP2_MMC1_BASE 0x4809c000
> -
> -#define OMAP4_MMC_REG_OFFSET 0x100
> -
> -struct omap_hwmod;
> -
> -#ifdef CONFIG_SOC_OMAP2420
> -int omap_msdi_reset(struct omap_hwmod *oh);
> -#else
> -static inline int omap_msdi_reset(struct omap_hwmod *oh)
> -{
> - return 0;
> -}
> -#endif
> diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
> deleted file mode 100644
> index 552b2fa4e4f1..000000000000
> --- a/arch/arm/mach-omap2/msdi.c
> +++ /dev/null
> @@ -1,75 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * MSDI IP block reset
> - *
> - * Copyright (C) 2012 Texas Instruments, Inc.
> - * Paul Walmsley
> - *
> - * XXX What about pad muxing?
> - */
> -
> -#include <linux/kernel.h>
> -#include <linux/err.h>
> -
> -#include "prm.h"
> -#include "common.h"
> -#include "control.h"
> -#include "omap_hwmod.h"
> -#include "omap_device.h"
> -#include "mmc.h"
> -
> -/*
> - * MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register
> - * from the IP block's base address
> - */
> -#define MSDI_CON_OFFSET 0x0c
> -
> -/* Register bitfields in the CON register */
> -#define MSDI_CON_POW_MASK BIT(11)
> -#define MSDI_CON_CLKD_MASK (0x3f << 0)
> -#define MSDI_CON_CLKD_SHIFT 0
> -
> -/* MSDI_TARGET_RESET_CLKD: clock divisor to use throughout the reset */
> -#define MSDI_TARGET_RESET_CLKD 0x3ff
> -
> -/**
> - * omap_msdi_reset - reset the MSDI IP block
> - * @oh: struct omap_hwmod *
> - *
> - * The MSDI IP block on OMAP2420 has to have both the POW and CLKD
> - * fields set inside its CON register for a reset to complete
> - * successfully. This is not documented in the TRM. For CLKD, we use
> - * the value that results in the lowest possible clock rate, to attempt
> - * to avoid disturbing any cards.
> - */
> -int omap_msdi_reset(struct omap_hwmod *oh)
> -{
> - u16 v = 0;
> - int c = 0;
> -
> - /* Write to the SOFTRESET bit */
> - omap_hwmod_softreset(oh);
> -
> - /* Enable the MSDI core and internal clock */
> - v |= MSDI_CON_POW_MASK;
> - v |= MSDI_TARGET_RESET_CLKD << MSDI_CON_CLKD_SHIFT;
> - omap_hwmod_write(v, oh, MSDI_CON_OFFSET);
> -
> - /* Poll on RESETDONE bit */
> - omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs)
> - & SYSS_RESETDONE_MASK),
> - MAX_MODULE_SOFTRESET_WAIT, c);
> -
> - if (c == MAX_MODULE_SOFTRESET_WAIT)
> - pr_warn("%s: %s: softreset failed (waited %d usec)\n",
> - __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
> - else
> - pr_debug("%s: %s: softreset in %d usec\n", __func__,
> - oh->name, c);
> -
> - /* Disable the MSDI internal clock */
> - v &= ~MSDI_CON_CLKD_MASK;
> - omap_hwmod_write(v, oh, MSDI_CON_OFFSET);
> -
> - return 0;
> -}
> diff --git a/arch/arm/mach-omap2/omap2-restart.c b/arch/arm/mach-omap2/omap2-restart.c
> deleted file mode 100644
> index fdcc75c97d70..000000000000
> --- a/arch/arm/mach-omap2/omap2-restart.c
> +++ /dev/null
> @@ -1,62 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * omap2-restart.c - code common to all OMAP2xxx machines.
> - *
> - * Copyright (C) 2012 Texas Instruments
> - * Paul Walmsley
> - */
> -#include <linux/kernel.h>
> -#include <linux/init.h>
> -#include <linux/clk.h>
> -#include <linux/io.h>
> -
> -#include "soc.h"
> -#include "common.h"
> -#include "prm.h"
> -
> -/*
> - * reset_virt_prcm_set_ck, reset_sys_ck: pointers to the virt_prcm_set
> - * clock and the sys_ck. Used during the reset process
> - */
> -static struct clk *reset_virt_prcm_set_ck, *reset_sys_ck;
> -
> -/* Reboot handling */
> -
> -/**
> - * omap2xxx_restart - Set DPLL to bypass mode for reboot to work
> - *
> - * Set the DPLL to bypass so that reboot completes successfully. No
> - * return value.
> - */
> -void omap2xxx_restart(enum reboot_mode mode, const char *cmd)
> -{
> - u32 rate;
> -
> - rate = clk_get_rate(reset_sys_ck);
> - clk_set_rate(reset_virt_prcm_set_ck, rate);
> -
> - /* XXX Should save the cmd argument for use after the reboot */
> -
> - omap_prm_reset_system();
> -}
> -
> -/**
> - * omap2xxx_common_look_up_clks_for_reset - look up clocks needed for restart
> - *
> - * Some clocks need to be looked up in advance for the SoC restart
> - * operation to work - see omap2xxx_restart(). Returns -EINVAL upon
> - * error or 0 upon success.
> - */
> -static int __init omap2xxx_common_look_up_clks_for_reset(void)
> -{
> - reset_virt_prcm_set_ck = clk_get(NULL, "virt_prcm_set");
> - if (IS_ERR(reset_virt_prcm_set_ck))
> - return -EINVAL;
> -
> - reset_sys_ck = clk_get(NULL, "sys_ck");
> - if (IS_ERR(reset_sys_ck))
> - return -EINVAL;
> -
> - return 0;
> -}
> -omap_postcore_initcall(omap2xxx_common_look_up_clks_for_reset);
> diff --git a/arch/arm/mach-omap2/omap24xx.h b/arch/arm/mach-omap2/omap24xx.h
> deleted file mode 100644
> index d9ecc0578292..000000000000
> --- a/arch/arm/mach-omap2/omap24xx.h
> +++ /dev/null
> @@ -1,73 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-or-later */
> -/*
> - * This file contains the processor specific definitions
> - * of the TI OMAP24XX.
> - *
> - * Copyright (C) 2007 Texas Instruments.
> - * Copyright (C) 2007 Nokia Corporation.
> - */
> -
> -#ifndef __ASM_ARCH_OMAP2_H
> -#define __ASM_ARCH_OMAP2_H
> -
> -/*
> - * Please place only base defines here and put the rest in device
> - * specific headers. Note also that some of these defines are needed
> - * for omap1 to compile without adding ifdefs.
> - */
> -
> -#define L4_24XX_BASE 0x48000000
> -#define L4_WK_243X_BASE 0x49000000
> -#define L3_24XX_BASE 0x68000000
> -
> -/* interrupt controller */
> -#define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000)
> -#define OMAP24XX_IVA_INTC_BASE 0x40000000
> -
> -#define OMAP242X_CTRL_BASE L4_24XX_BASE
> -#define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000)
> -#define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000)
> -#define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000)
> -#define OMAP2420_PRM_BASE OMAP2420_CM_BASE
> -#define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000)
> -#define OMAP2420_SMS_BASE 0x68008000
> -#define OMAP2420_GPMC_BASE 0x6800a000
> -
> -#define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000)
> -#define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000)
> -#define OMAP2430_CM_BASE (L4_WK_243X_BASE + 0x6000)
> -#define OMAP2430_PRM_BASE OMAP2430_CM_BASE
> -
> -#define OMAP243X_SMS_BASE 0x6C000000
> -#define OMAP243X_SDRC_BASE 0x6D000000
> -#define OMAP243X_GPMC_BASE 0x6E000000
> -#define OMAP243X_SCM_BASE (L4_WK_243X_BASE + 0x2000)
> -#define OMAP243X_CTRL_BASE OMAP243X_SCM_BASE
> -#define OMAP243X_HS_BASE (L4_24XX_BASE + 0x000ac000)
> -
> -/* DSP SS */
> -#define OMAP2420_DSP_BASE 0x58000000
> -#define OMAP2420_DSP_MEM_BASE (OMAP2420_DSP_BASE + 0x0)
> -#define OMAP2420_DSP_IPI_BASE (OMAP2420_DSP_BASE + 0x1000000)
> -#define OMAP2420_DSP_MMU_BASE (OMAP2420_DSP_BASE + 0x2000000)
> -
> -#define OMAP243X_DSP_BASE 0x5C000000
> -#define OMAP243X_DSP_MEM_BASE (OMAP243X_DSP_BASE + 0x0)
> -#define OMAP243X_DSP_MMU_BASE (OMAP243X_DSP_BASE + 0x1000000)
> -
> -/* Mailbox */
> -#define OMAP24XX_MAILBOX_BASE (L4_24XX_BASE + 0x94000)
> -
> -/* Camera */
> -#define OMAP24XX_CAMERA_BASE (L4_24XX_BASE + 0x52000)
> -
> -/* Security */
> -#define OMAP24XX_SEC_BASE (L4_24XX_BASE + 0xA0000)
> -#define OMAP24XX_SEC_RNG_BASE (OMAP24XX_SEC_BASE + 0x0000)
> -#define OMAP24XX_SEC_DES_BASE (OMAP24XX_SEC_BASE + 0x2000)
> -#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000)
> -#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000)
> -#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000)
> -
> -#endif /* __ASM_ARCH_OMAP2_H */
> -
> diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
> index 03cd523dff87..c918399ea735 100644
> --- a/arch/arm/mach-omap2/omap_hwmod.c
> +++ b/arch/arm/mach-omap2/omap_hwmod.c
> @@ -153,9 +153,7 @@
> #include "common.h"
> #include "clockdomain.h"
> #include "hdq1w.h"
> -#include "mmc.h"
> #include "powerdomain.h"
> -#include "cm2xxx.h"
> #include "cm3xxx.h"
> #include "cm33xx.h"
> #include "prm.h"
> @@ -3469,10 +3467,6 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
> return -ENOMEM;
> }
>
> -static const struct omap_hwmod_reset omap24xx_reset_quirks[] = {
> - { .match = "msdi", .len = 4, .reset = omap_msdi_reset, },
> -};
> -
> static const struct omap_hwmod_reset omap_reset_quirks[] = {
> { .match = "dss_core", .len = 8, .reset = omap_dss_reset, },
> { .match = "hdq1w", .len = 5, .reset = omap_hdq1w_reset, },
> @@ -3503,11 +3497,6 @@ static void
> omap_hwmod_init_reset_quirks(struct device *dev, struct omap_hwmod *oh,
> const struct ti_sysc_module_data *data)
> {
> - if (soc_is_omap24xx())
> - omap_hwmod_init_reset_quirk(dev, oh, data,
> - omap24xx_reset_quirks,
> - ARRAY_SIZE(omap24xx_reset_quirks));
> -
> omap_hwmod_init_reset_quirk(dev, oh, data, omap_reset_quirks,
> ARRAY_SIZE(omap_reset_quirks));
> }
> @@ -3914,12 +3903,7 @@ int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state)
> */
> void __init omap_hwmod_init(void)
> {
> - if (cpu_is_omap24xx()) {
> - soc_ops.wait_target_ready = _omap2xxx_3xxx_wait_target_ready;
> - soc_ops.assert_hardreset = _omap2_assert_hardreset;
> - soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
> - soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
> - } else if (cpu_is_omap34xx()) {
> + if (cpu_is_omap34xx()) {
> soc_ops.wait_target_ready = _omap2xxx_3xxx_wait_target_ready;
> soc_ops.assert_hardreset = _omap2_assert_hardreset;
> soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
> diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
> index dcab7a01c10e..b60cd09c1997 100644
> --- a/arch/arm/mach-omap2/omap_hwmod.h
> +++ b/arch/arm/mach-omap2/omap_hwmod.h
> @@ -663,8 +663,6 @@ omap_hwmod_for_each_by_class(const char *classname,
> * Chip variant-specific hwmod init routines - XXX should be converted
> * to use initcalls once the initial boot ordering is straightened out
> */
> -extern int omap2420_hwmod_init(void);
> -extern int omap2430_hwmod_init(void);
> extern int omap3xxx_hwmod_init(void);
> extern int dm814x_hwmod_init(void);
> extern int dm816x_hwmod_init(void);
> diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
> deleted file mode 100644
> index dbd9dc9f0962..000000000000
> --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
> +++ /dev/null
> @@ -1,402 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * omap_hwmod_2420_data.c - hardware modules present on the OMAP2420 chips
> - *
> - * Copyright (C) 2009-2011 Nokia Corporation
> - * Copyright (C) 2012 Texas Instruments, Inc.
> - * Paul Walmsley
> - *
> - * XXX handle crossbar/shared link difference for L3?
> - * XXX these should be marked initdata for multi-OMAP kernels
> - */
> -
> -#include <linux/platform_data/i2c-omap.h>
> -
> -#include "omap_hwmod.h"
> -#include "l3_2xxx.h"
> -#include "l4_2xxx.h"
> -
> -#include "omap_hwmod_common_data.h"
> -
> -#include "cm-regbits-24xx.h"
> -#include "prm-regbits-24xx.h"
> -#include "i2c.h"
> -#include "mmc.h"
> -#include "wd_timer.h"
> -
> -/*
> - * OMAP2420 hardware module integration data
> - *
> - * All of the data in this section should be autogeneratable from the
> - * TI hardware database or other technical documentation. Data that
> - * is driver-specific or driver-kernel integration-specific belongs
> - * elsewhere.
> - */
> -
> -/*
> - * IP blocks
> - */
> -
> -/* IVA1 (IVA1) */
> -static struct omap_hwmod_class iva1_hwmod_class = {
> - .name = "iva1",
> -};
> -
> -static struct omap_hwmod_rst_info omap2420_iva_resets[] = {
> - { .name = "iva", .rst_shift = 8 },
> -};
> -
> -static struct omap_hwmod omap2420_iva_hwmod = {
> - .name = "iva",
> - .class = &iva1_hwmod_class,
> - .clkdm_name = "iva1_clkdm",
> - .rst_lines = omap2420_iva_resets,
> - .rst_lines_cnt = ARRAY_SIZE(omap2420_iva_resets),
> - .main_clk = "iva1_ifck",
> -};
> -
> -/* DSP */
> -static struct omap_hwmod_class dsp_hwmod_class = {
> - .name = "dsp",
> -};
> -
> -static struct omap_hwmod_rst_info omap2420_dsp_resets[] = {
> - { .name = "logic", .rst_shift = 0 },
> - { .name = "mmu", .rst_shift = 1 },
> -};
> -
> -static struct omap_hwmod omap2420_dsp_hwmod = {
> - .name = "dsp",
> - .class = &dsp_hwmod_class,
> - .clkdm_name = "dsp_clkdm",
> - .rst_lines = omap2420_dsp_resets,
> - .rst_lines_cnt = ARRAY_SIZE(omap2420_dsp_resets),
> - .main_clk = "dsp_fck",
> -};
> -
> -/* I2C common */
> -static struct omap_hwmod_class_sysconfig i2c_sysc = {
> - .rev_offs = 0x00,
> - .sysc_offs = 0x20,
> - .syss_offs = 0x10,
> - .sysc_flags = (SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
> - .sysc_fields = &omap_hwmod_sysc_type1,
> -};
> -
> -static struct omap_hwmod_class i2c_class = {
> - .name = "i2c",
> - .sysc = &i2c_sysc,
> - .reset = &omap_i2c_reset,
> -};
> -
> -/* I2C1 */
> -static struct omap_hwmod omap2420_i2c1_hwmod = {
> - .name = "i2c1",
> - .main_clk = "i2c1_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP2420_ST_I2C1_SHIFT,
> - },
> - },
> - .class = &i2c_class,
> - /*
> - * From mach-omap2/pm24xx.c: "Putting MPU into the WFI state
> - * while a transfer is active seems to cause the I2C block to
> - * timeout. Why? Good question."
> - */
> - .flags = (HWMOD_16BIT_REG | HWMOD_BLOCK_WFI),
> -};
> -
> -/* I2C2 */
> -static struct omap_hwmod omap2420_i2c2_hwmod = {
> - .name = "i2c2",
> - .main_clk = "i2c2_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP2420_ST_I2C2_SHIFT,
> - },
> - },
> - .class = &i2c_class,
> - .flags = HWMOD_16BIT_REG,
> -};
> -
> -/* mailbox */
> -static struct omap_hwmod omap2420_mailbox_hwmod = {
> - .name = "mailbox",
> - .class = &omap2xxx_mailbox_hwmod_class,
> - .main_clk = "mailboxes_ick",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
> - },
> - },
> -};
> -
> -/*
> - * 'mcbsp' class
> - * multi channel buffered serial port controller
> - */
> -
> -static struct omap_hwmod_class omap2420_mcbsp_hwmod_class = {
> - .name = "mcbsp",
> -};
> -
> -static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
> - { .role = "pad_fck", .clk = "mcbsp_clks" },
> - { .role = "prcm_fck", .clk = "func_96m_ck" },
> -};
> -
> -/* mcbsp1 */
> -static struct omap_hwmod omap2420_mcbsp1_hwmod = {
> - .name = "mcbsp1",
> - .class = &omap2420_mcbsp_hwmod_class,
> - .main_clk = "mcbsp1_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT,
> - },
> - },
> - .opt_clks = mcbsp_opt_clks,
> - .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
> -};
> -
> -/* mcbsp2 */
> -static struct omap_hwmod omap2420_mcbsp2_hwmod = {
> - .name = "mcbsp2",
> - .class = &omap2420_mcbsp_hwmod_class,
> - .main_clk = "mcbsp2_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT,
> - },
> - },
> - .opt_clks = mcbsp_opt_clks,
> - .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
> -};
> -
> -static struct omap_hwmod_class_sysconfig omap2420_msdi_sysc = {
> - .rev_offs = 0x3c,
> - .sysc_offs = 0x64,
> - .syss_offs = 0x68,
> - .sysc_flags = (SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
> - .sysc_fields = &omap_hwmod_sysc_type1,
> -};
> -
> -static struct omap_hwmod_class omap2420_msdi_hwmod_class = {
> - .name = "msdi",
> - .sysc = &omap2420_msdi_sysc,
> - .reset = &omap_msdi_reset,
> -};
> -
> -/* msdi1 */
> -static struct omap_hwmod omap2420_msdi1_hwmod = {
> - .name = "msdi1",
> - .class = &omap2420_msdi_hwmod_class,
> - .main_clk = "mmc_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP2420_ST_MMC_SHIFT,
> - },
> - },
> - .flags = HWMOD_16BIT_REG,
> -};
> -
> -/* HDQ1W/1-wire */
> -static struct omap_hwmod omap2420_hdq1w_hwmod = {
> - .name = "hdq1w",
> - .main_clk = "hdq_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_HDQ_SHIFT,
> - },
> - },
> - .class = &omap2_hdq1w_class,
> -};
> -
> -/*
> - * interfaces
> - */
> -
> -/* L4 CORE -> I2C1 interface */
> -static struct omap_hwmod_ocp_if omap2420_l4_core__i2c1 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2420_i2c1_hwmod,
> - .clk = "i2c1_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* L4 CORE -> I2C2 interface */
> -static struct omap_hwmod_ocp_if omap2420_l4_core__i2c2 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2420_i2c2_hwmod,
> - .clk = "i2c2_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* IVA <- L3 interface */
> -static struct omap_hwmod_ocp_if omap2420_l3__iva = {
> - .master = &omap2xxx_l3_main_hwmod,
> - .slave = &omap2420_iva_hwmod,
> - .clk = "core_l3_ck",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* DSP <- L3 interface */
> -static struct omap_hwmod_ocp_if omap2420_l3__dsp = {
> - .master = &omap2xxx_l3_main_hwmod,
> - .slave = &omap2420_dsp_hwmod,
> - .clk = "dsp_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_wkup -> wd_timer2 */
> -static struct omap_hwmod_ocp_if omap2420_l4_wkup__wd_timer2 = {
> - .master = &omap2xxx_l4_wkup_hwmod,
> - .slave = &omap2xxx_wd_timer2_hwmod,
> - .clk = "mpu_wdt_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_wkup -> gpio1 */
> -static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio1 = {
> - .master = &omap2xxx_l4_wkup_hwmod,
> - .slave = &omap2xxx_gpio1_hwmod,
> - .clk = "gpios_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_wkup -> gpio2 */
> -static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio2 = {
> - .master = &omap2xxx_l4_wkup_hwmod,
> - .slave = &omap2xxx_gpio2_hwmod,
> - .clk = "gpios_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_wkup -> gpio3 */
> -static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio3 = {
> - .master = &omap2xxx_l4_wkup_hwmod,
> - .slave = &omap2xxx_gpio3_hwmod,
> - .clk = "gpios_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_wkup -> gpio4 */
> -static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio4 = {
> - .master = &omap2xxx_l4_wkup_hwmod,
> - .slave = &omap2xxx_gpio4_hwmod,
> - .clk = "gpios_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> mailbox */
> -static struct omap_hwmod_ocp_if omap2420_l4_core__mailbox = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2420_mailbox_hwmod,
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> mcbsp1 */
> -static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp1 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2420_mcbsp1_hwmod,
> - .clk = "mcbsp1_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> mcbsp2 */
> -static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp2 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2420_mcbsp2_hwmod,
> - .clk = "mcbsp2_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> msdi1 */
> -static struct omap_hwmod_ocp_if omap2420_l4_core__msdi1 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2420_msdi1_hwmod,
> - .clk = "mmc_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> hdq1w interface */
> -static struct omap_hwmod_ocp_if omap2420_l4_core__hdq1w = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2420_hdq1w_hwmod,
> - .clk = "hdq_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> - .flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
> -};
> -
> -static struct omap_hwmod_ocp_if omap2420_l3__gpmc = {
> - .master = &omap2xxx_l3_main_hwmod,
> - .slave = &omap2xxx_gpmc_hwmod,
> - .clk = "core_l3_ck",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = {
> - &omap2xxx_l3_main__l4_core,
> - &omap2xxx_mpu__l3_main,
> - &omap2xxx_dss__l3,
> - &omap2xxx_l4_core__mcspi1,
> - &omap2xxx_l4_core__mcspi2,
> - &omap2xxx_l4_core__l4_wkup,
> - &omap2_l4_core__uart1,
> - &omap2_l4_core__uart2,
> - &omap2_l4_core__uart3,
> - &omap2420_l4_core__i2c1,
> - &omap2420_l4_core__i2c2,
> - &omap2420_l3__iva,
> - &omap2420_l3__dsp,
> - &omap2xxx_l4_core__timer3,
> - &omap2xxx_l4_core__timer4,
> - &omap2xxx_l4_core__timer5,
> - &omap2xxx_l4_core__timer6,
> - &omap2xxx_l4_core__timer7,
> - &omap2xxx_l4_core__timer8,
> - &omap2xxx_l4_core__timer9,
> - &omap2xxx_l4_core__timer10,
> - &omap2xxx_l4_core__timer11,
> - &omap2xxx_l4_core__timer12,
> - &omap2420_l4_wkup__wd_timer2,
> - &omap2xxx_l4_core__dss,
> - &omap2xxx_l4_core__dss_dispc,
> - &omap2xxx_l4_core__dss_rfbi,
> - &omap2xxx_l4_core__dss_venc,
> - &omap2420_l4_wkup__gpio1,
> - &omap2420_l4_wkup__gpio2,
> - &omap2420_l4_wkup__gpio3,
> - &omap2420_l4_wkup__gpio4,
> - &omap2420_l4_core__mailbox,
> - &omap2420_l4_core__mcbsp1,
> - &omap2420_l4_core__mcbsp2,
> - &omap2420_l4_core__msdi1,
> - &omap2xxx_l4_core__rng,
> - &omap2xxx_l4_core__sham,
> - &omap2xxx_l4_core__aes,
> - &omap2420_l4_core__hdq1w,
> - &omap2420_l3__gpmc,
> - NULL,
> -};
> -
> -int __init omap2420_hwmod_init(void)
> -{
> - omap_hwmod_init();
> - return omap_hwmod_register_links(omap2420_hwmod_ocp_ifs);
> -}
> diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
> deleted file mode 100644
> index c93200801b34..000000000000
> --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
> +++ /dev/null
> @@ -1,606 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * omap_hwmod_2430_data.c - hardware modules present on the OMAP2430 chips
> - *
> - * Copyright (C) 2009-2011 Nokia Corporation
> - * Copyright (C) 2012 Texas Instruments, Inc.
> - * Paul Walmsley
> - *
> - * XXX handle crossbar/shared link difference for L3?
> - * XXX these should be marked initdata for multi-OMAP kernels
> - */
> -
> -#include <linux/platform_data/i2c-omap.h>
> -#include <linux/platform_data/hsmmc-omap.h>
> -
> -#include "omap_hwmod.h"
> -#include "l3_2xxx.h"
> -
> -#include "soc.h"
> -#include "omap_hwmod_common_data.h"
> -#include "prm-regbits-24xx.h"
> -#include "cm-regbits-24xx.h"
> -#include "i2c.h"
> -#include "wd_timer.h"
> -
> -/*
> - * OMAP2430 hardware module integration data
> - *
> - * All of the data in this section should be autogeneratable from the
> - * TI hardware database or other technical documentation. Data that
> - * is driver-specific or driver-kernel integration-specific belongs
> - * elsewhere.
> - */
> -
> -/*
> - * IP blocks
> - */
> -
> -/* IVA2 (IVA2) */
> -static struct omap_hwmod_rst_info omap2430_iva_resets[] = {
> - { .name = "logic", .rst_shift = 0 },
> - { .name = "mmu", .rst_shift = 1 },
> -};
> -
> -static struct omap_hwmod omap2430_iva_hwmod = {
> - .name = "iva",
> - .class = &iva_hwmod_class,
> - .clkdm_name = "dsp_clkdm",
> - .rst_lines = omap2430_iva_resets,
> - .rst_lines_cnt = ARRAY_SIZE(omap2430_iva_resets),
> - .main_clk = "dsp_fck",
> -};
> -
> -/* I2C common */
> -static struct omap_hwmod_class_sysconfig i2c_sysc = {
> - .rev_offs = 0x00,
> - .sysc_offs = 0x20,
> - .syss_offs = 0x10,
> - .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
> - SYSS_HAS_RESET_STATUS),
> - .sysc_fields = &omap_hwmod_sysc_type1,
> -};
> -
> -static struct omap_hwmod_class i2c_class = {
> - .name = "i2c",
> - .sysc = &i2c_sysc,
> - .reset = &omap_i2c_reset,
> -};
> -
> -/* I2C1 */
> -static struct omap_hwmod omap2430_i2c1_hwmod = {
> - .name = "i2c1",
> - .flags = HWMOD_16BIT_REG,
> - .main_clk = "i2chs1_fck",
> - .prcm = {
> - .omap2 = {
> - /*
> - * NOTE: The CM_FCLKEN* and CM_ICLKEN* for
> - * I2CHS IP's do not follow the usual pattern.
> - * prcm_reg_id alone cannot be used to program
> - * the iclk and fclk. Needs to be handled using
> - * additional flags when clk handling is moved
> - * to hwmod framework.
> - */
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP2430_ST_I2CHS1_SHIFT,
> - },
> - },
> - .class = &i2c_class,
> -};
> -
> -/* I2C2 */
> -static struct omap_hwmod omap2430_i2c2_hwmod = {
> - .name = "i2c2",
> - .flags = HWMOD_16BIT_REG,
> - .main_clk = "i2chs2_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP2430_ST_I2CHS2_SHIFT,
> - },
> - },
> - .class = &i2c_class,
> -};
> -
> -/* gpio5 */
> -static struct omap_hwmod omap2430_gpio5_hwmod = {
> - .name = "gpio5",
> - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
> - .main_clk = "gpio5_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 2,
> - .idlest_idle_bit = OMAP2430_ST_GPIO5_SHIFT,
> - },
> - },
> - .class = &omap2xxx_gpio_hwmod_class,
> -};
> -
> -/* mailbox */
> -static struct omap_hwmod omap2430_mailbox_hwmod = {
> - .name = "mailbox",
> - .class = &omap2xxx_mailbox_hwmod_class,
> - .main_clk = "mailboxes_ick",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
> - },
> - },
> -};
> -
> -/* mcspi3 */
> -static struct omap_hwmod omap2430_mcspi3_hwmod = {
> - .name = "mcspi3",
> - .main_clk = "mcspi3_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 2,
> - .idlest_idle_bit = OMAP2430_ST_MCSPI3_SHIFT,
> - },
> - },
> - .class = &omap2xxx_mcspi_class,
> -};
> -
> -/* usbhsotg */
> -static struct omap_hwmod_class_sysconfig omap2430_usbhsotg_sysc = {
> - .rev_offs = 0x0400,
> - .sysc_offs = 0x0404,
> - .syss_offs = 0x0408,
> - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE|
> - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
> - SYSC_HAS_AUTOIDLE),
> - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
> - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
> - .sysc_fields = &omap_hwmod_sysc_type1,
> -};
> -
> -static struct omap_hwmod_class usbotg_class = {
> - .name = "usbotg",
> - .sysc = &omap2430_usbhsotg_sysc,
> -};
> -
> -/* usb_otg_hs */
> -static struct omap_hwmod omap2430_usbhsotg_hwmod = {
> - .name = "usb_otg_hs",
> - .main_clk = "usbhs_ick",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP2430_ST_USBHS_SHIFT,
> - },
> - },
> - .class = &usbotg_class,
> - /*
> - * Erratum ID: i479 idle_req / idle_ack mechanism potentially
> - * broken when autoidle is enabled
> - * workaround is to disable the autoidle bit at module level.
> - */
> - .flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
> - | HWMOD_SWSUP_MSTANDBY,
> -};
> -
> -/*
> - * 'mcbsp' class
> - * multi channel buffered serial port controller
> - */
> -
> -static struct omap_hwmod_class_sysconfig omap2430_mcbsp_sysc = {
> - .rev_offs = 0x007C,
> - .sysc_offs = 0x008C,
> - .sysc_flags = (SYSC_HAS_SOFTRESET),
> - .sysc_fields = &omap_hwmod_sysc_type1,
> -};
> -
> -static struct omap_hwmod_class omap2430_mcbsp_hwmod_class = {
> - .name = "mcbsp",
> - .sysc = &omap2430_mcbsp_sysc,
> -};
> -
> -static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
> - { .role = "pad_fck", .clk = "mcbsp_clks" },
> - { .role = "prcm_fck", .clk = "func_96m_ck" },
> -};
> -
> -/* mcbsp1 */
> -static struct omap_hwmod omap2430_mcbsp1_hwmod = {
> - .name = "mcbsp1",
> - .class = &omap2430_mcbsp_hwmod_class,
> - .main_clk = "mcbsp1_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT,
> - },
> - },
> - .opt_clks = mcbsp_opt_clks,
> - .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
> -};
> -
> -/* mcbsp2 */
> -static struct omap_hwmod omap2430_mcbsp2_hwmod = {
> - .name = "mcbsp2",
> - .class = &omap2430_mcbsp_hwmod_class,
> - .main_clk = "mcbsp2_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT,
> - },
> - },
> - .opt_clks = mcbsp_opt_clks,
> - .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
> -};
> -
> -/* mcbsp3 */
> -static struct omap_hwmod omap2430_mcbsp3_hwmod = {
> - .name = "mcbsp3",
> - .class = &omap2430_mcbsp_hwmod_class,
> - .main_clk = "mcbsp3_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 2,
> - .idlest_idle_bit = OMAP2430_ST_MCBSP3_SHIFT,
> - },
> - },
> - .opt_clks = mcbsp_opt_clks,
> - .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
> -};
> -
> -/* mcbsp4 */
> -static struct omap_hwmod omap2430_mcbsp4_hwmod = {
> - .name = "mcbsp4",
> - .class = &omap2430_mcbsp_hwmod_class,
> - .main_clk = "mcbsp4_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 2,
> - .idlest_idle_bit = OMAP2430_ST_MCBSP4_SHIFT,
> - },
> - },
> - .opt_clks = mcbsp_opt_clks,
> - .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
> -};
> -
> -/* mcbsp5 */
> -static struct omap_hwmod omap2430_mcbsp5_hwmod = {
> - .name = "mcbsp5",
> - .class = &omap2430_mcbsp_hwmod_class,
> - .main_clk = "mcbsp5_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 2,
> - .idlest_idle_bit = OMAP2430_ST_MCBSP5_SHIFT,
> - },
> - },
> - .opt_clks = mcbsp_opt_clks,
> - .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
> -};
> -
> -/* MMC/SD/SDIO common */
> -static struct omap_hwmod_class_sysconfig omap2430_mmc_sysc = {
> - .rev_offs = 0x1fc,
> - .sysc_offs = 0x10,
> - .syss_offs = 0x14,
> - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
> - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
> - SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
> - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
> - .sysc_fields = &omap_hwmod_sysc_type1,
> -};
> -
> -static struct omap_hwmod_class omap2430_mmc_class = {
> - .name = "mmc",
> - .sysc = &omap2430_mmc_sysc,
> -};
> -
> -/* MMC/SD/SDIO1 */
> -static struct omap_hwmod_opt_clk omap2430_mmc1_opt_clks[] = {
> - { .role = "dbck", .clk = "mmchsdb1_fck" },
> -};
> -
> -static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
> - .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
> -};
> -
> -static struct omap_hwmod omap2430_mmc1_hwmod = {
> - .name = "mmc1",
> - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
> - .opt_clks = omap2430_mmc1_opt_clks,
> - .opt_clks_cnt = ARRAY_SIZE(omap2430_mmc1_opt_clks),
> - .main_clk = "mmchs1_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 2,
> - .idlest_idle_bit = OMAP2430_ST_MMCHS1_SHIFT,
> - },
> - },
> - .dev_attr = &mmc1_dev_attr,
> - .class = &omap2430_mmc_class,
> -};
> -
> -/* MMC/SD/SDIO2 */
> -static struct omap_hwmod_opt_clk omap2430_mmc2_opt_clks[] = {
> - { .role = "dbck", .clk = "mmchsdb2_fck" },
> -};
> -
> -static struct omap_hwmod omap2430_mmc2_hwmod = {
> - .name = "mmc2",
> - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
> - .opt_clks = omap2430_mmc2_opt_clks,
> - .opt_clks_cnt = ARRAY_SIZE(omap2430_mmc2_opt_clks),
> - .main_clk = "mmchs2_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 2,
> - .idlest_idle_bit = OMAP2430_ST_MMCHS2_SHIFT,
> - },
> - },
> - .class = &omap2430_mmc_class,
> -};
> -
> -/* HDQ1W/1-wire */
> -static struct omap_hwmod omap2430_hdq1w_hwmod = {
> - .name = "hdq1w",
> - .main_clk = "hdq_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_HDQ_SHIFT,
> - },
> - },
> - .class = &omap2_hdq1w_class,
> -};
> -
> -/*
> - * interfaces
> - */
> -
> -/* L3 -> L4_CORE interface */
> -/* l3_core -> usbhsotg interface */
> -static struct omap_hwmod_ocp_if omap2430_usbhsotg__l3 = {
> - .master = &omap2430_usbhsotg_hwmod,
> - .slave = &omap2xxx_l3_main_hwmod,
> - .clk = "core_l3_ck",
> - .user = OCP_USER_MPU,
> -};
> -
> -/* L4 CORE -> I2C1 interface */
> -static struct omap_hwmod_ocp_if omap2430_l4_core__i2c1 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2430_i2c1_hwmod,
> - .clk = "i2c1_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* L4 CORE -> I2C2 interface */
> -static struct omap_hwmod_ocp_if omap2430_l4_core__i2c2 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2430_i2c2_hwmod,
> - .clk = "i2c2_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core ->usbhsotg interface */
> -static struct omap_hwmod_ocp_if omap2430_l4_core__usbhsotg = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2430_usbhsotg_hwmod,
> - .clk = "usb_l4_ick",
> - .user = OCP_USER_MPU,
> -};
> -
> -/* L4 CORE -> MMC1 interface */
> -static struct omap_hwmod_ocp_if omap2430_l4_core__mmc1 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2430_mmc1_hwmod,
> - .clk = "mmchs1_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* L4 CORE -> MMC2 interface */
> -static struct omap_hwmod_ocp_if omap2430_l4_core__mmc2 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2430_mmc2_hwmod,
> - .clk = "mmchs2_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4 core -> mcspi3 interface */
> -static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi3 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2430_mcspi3_hwmod,
> - .clk = "mcspi3_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* IVA2 <- L3 interface */
> -static struct omap_hwmod_ocp_if omap2430_l3__iva = {
> - .master = &omap2xxx_l3_main_hwmod,
> - .slave = &omap2430_iva_hwmod,
> - .clk = "core_l3_ck",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_wkup -> wd_timer2 */
> -static struct omap_hwmod_ocp_if omap2430_l4_wkup__wd_timer2 = {
> - .master = &omap2xxx_l4_wkup_hwmod,
> - .slave = &omap2xxx_wd_timer2_hwmod,
> - .clk = "mpu_wdt_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_wkup -> gpio1 */
> -static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio1 = {
> - .master = &omap2xxx_l4_wkup_hwmod,
> - .slave = &omap2xxx_gpio1_hwmod,
> - .clk = "gpios_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_wkup -> gpio2 */
> -static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio2 = {
> - .master = &omap2xxx_l4_wkup_hwmod,
> - .slave = &omap2xxx_gpio2_hwmod,
> - .clk = "gpios_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_wkup -> gpio3 */
> -static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio3 = {
> - .master = &omap2xxx_l4_wkup_hwmod,
> - .slave = &omap2xxx_gpio3_hwmod,
> - .clk = "gpios_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_wkup -> gpio4 */
> -static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio4 = {
> - .master = &omap2xxx_l4_wkup_hwmod,
> - .slave = &omap2xxx_gpio4_hwmod,
> - .clk = "gpios_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> gpio5 */
> -static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2430_gpio5_hwmod,
> - .clk = "gpio5_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> mailbox */
> -static struct omap_hwmod_ocp_if omap2430_l4_core__mailbox = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2430_mailbox_hwmod,
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> mcbsp1 */
> -static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp1 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2430_mcbsp1_hwmod,
> - .clk = "mcbsp1_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> mcbsp2 */
> -static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp2 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2430_mcbsp2_hwmod,
> - .clk = "mcbsp2_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> mcbsp3 */
> -static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp3 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2430_mcbsp3_hwmod,
> - .clk = "mcbsp3_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> mcbsp4 */
> -static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp4 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2430_mcbsp4_hwmod,
> - .clk = "mcbsp4_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> mcbsp5 */
> -static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp5 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2430_mcbsp5_hwmod,
> - .clk = "mcbsp5_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> hdq1w */
> -static struct omap_hwmod_ocp_if omap2430_l4_core__hdq1w = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2430_hdq1w_hwmod,
> - .clk = "hdq_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> - .flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
> -};
> -
> -static struct omap_hwmod_ocp_if omap2430_l3__gpmc = {
> - .master = &omap2xxx_l3_main_hwmod,
> - .slave = &omap2xxx_gpmc_hwmod,
> - .clk = "core_l3_ck",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = {
> - &omap2xxx_l3_main__l4_core,
> - &omap2xxx_mpu__l3_main,
> - &omap2xxx_dss__l3,
> - &omap2430_usbhsotg__l3,
> - &omap2430_l4_core__i2c1,
> - &omap2430_l4_core__i2c2,
> - &omap2xxx_l4_core__l4_wkup,
> - &omap2_l4_core__uart1,
> - &omap2_l4_core__uart2,
> - &omap2_l4_core__uart3,
> - &omap2430_l4_core__usbhsotg,
> - &omap2430_l4_core__mmc1,
> - &omap2430_l4_core__mmc2,
> - &omap2xxx_l4_core__mcspi1,
> - &omap2xxx_l4_core__mcspi2,
> - &omap2430_l4_core__mcspi3,
> - &omap2430_l3__iva,
> - &omap2xxx_l4_core__timer3,
> - &omap2xxx_l4_core__timer4,
> - &omap2xxx_l4_core__timer5,
> - &omap2xxx_l4_core__timer6,
> - &omap2xxx_l4_core__timer7,
> - &omap2xxx_l4_core__timer8,
> - &omap2xxx_l4_core__timer9,
> - &omap2xxx_l4_core__timer10,
> - &omap2xxx_l4_core__timer11,
> - &omap2xxx_l4_core__timer12,
> - &omap2430_l4_wkup__wd_timer2,
> - &omap2xxx_l4_core__dss,
> - &omap2xxx_l4_core__dss_dispc,
> - &omap2xxx_l4_core__dss_rfbi,
> - &omap2xxx_l4_core__dss_venc,
> - &omap2430_l4_wkup__gpio1,
> - &omap2430_l4_wkup__gpio2,
> - &omap2430_l4_wkup__gpio3,
> - &omap2430_l4_wkup__gpio4,
> - &omap2430_l4_core__gpio5,
> - &omap2430_l4_core__mailbox,
> - &omap2430_l4_core__mcbsp1,
> - &omap2430_l4_core__mcbsp2,
> - &omap2430_l4_core__mcbsp3,
> - &omap2430_l4_core__mcbsp4,
> - &omap2430_l4_core__mcbsp5,
> - &omap2430_l4_core__hdq1w,
> - &omap2xxx_l4_core__rng,
> - &omap2xxx_l4_core__sham,
> - &omap2xxx_l4_core__aes,
> - &omap2430_l3__gpmc,
> - NULL,
> -};
> -
> -int __init omap2430_hwmod_init(void)
> -{
> - omap_hwmod_init();
> - return omap_hwmod_register_links(omap2430_hwmod_ocp_ifs);
> -}
> diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
> deleted file mode 100644
> index 761d34914ed9..000000000000
> --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
> +++ /dev/null
> @@ -1,256 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * omap_hwmod_2xxx_interconnect_data.c - common interconnect data for OMAP2xxx
> - *
> - * Copyright (C) 2009-2011 Nokia Corporation
> - * Paul Walmsley
> - *
> - * XXX handle crossbar/shared link difference for L3?
> - * XXX these should be marked initdata for multi-OMAP kernels
> - */
> -#include <linux/sizes.h>
> -
> -#include "omap_hwmod.h"
> -#include "l3_2xxx.h"
> -#include "l4_2xxx.h"
> -
> -#include "omap_hwmod_common_data.h"
> -
> -/*
> - * Common interconnect data
> - */
> -
> -/* L3 -> L4_CORE interface */
> -struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core = {
> - .master = &omap2xxx_l3_main_hwmod,
> - .slave = &omap2xxx_l4_core_hwmod,
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* MPU -> L3 interface */
> -struct omap_hwmod_ocp_if omap2xxx_mpu__l3_main = {
> - .master = &omap2xxx_mpu_hwmod,
> - .slave = &omap2xxx_l3_main_hwmod,
> - .user = OCP_USER_MPU,
> -};
> -
> -/* DSS -> l3 */
> -struct omap_hwmod_ocp_if omap2xxx_dss__l3 = {
> - .master = &omap2xxx_dss_core_hwmod,
> - .slave = &omap2xxx_l3_main_hwmod,
> - .fw = {
> - .omap2 = {
> - .l3_perm_bit = OMAP2_L3_CORE_FW_CONNID_DSS,
> - .flags = OMAP_FIREWALL_L3,
> - },
> - },
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* L4_CORE -> L4_WKUP interface */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__l4_wkup = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_l4_wkup_hwmod,
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* L4 CORE -> UART1 interface */
> -struct omap_hwmod_ocp_if omap2_l4_core__uart1 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_uart1_hwmod,
> - .clk = "uart1_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* L4 CORE -> UART2 interface */
> -struct omap_hwmod_ocp_if omap2_l4_core__uart2 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_uart2_hwmod,
> - .clk = "uart2_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* L4 PER -> UART3 interface */
> -struct omap_hwmod_ocp_if omap2_l4_core__uart3 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_uart3_hwmod,
> - .clk = "uart3_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4 core -> mcspi1 interface */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi1 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_mcspi1_hwmod,
> - .clk = "mcspi1_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4 core -> mcspi2 interface */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi2 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_mcspi2_hwmod,
> - .clk = "mcspi2_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> timer3 */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__timer3 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_timer3_hwmod,
> - .clk = "gpt3_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> timer4 */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__timer4 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_timer4_hwmod,
> - .clk = "gpt4_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> timer5 */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__timer5 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_timer5_hwmod,
> - .clk = "gpt5_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> timer6 */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__timer6 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_timer6_hwmod,
> - .clk = "gpt6_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> timer7 */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__timer7 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_timer7_hwmod,
> - .clk = "gpt7_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> timer8 */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__timer8 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_timer8_hwmod,
> - .clk = "gpt8_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> timer9 */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__timer9 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_timer9_hwmod,
> - .clk = "gpt9_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> timer10 */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__timer10 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_timer10_hwmod,
> - .clk = "gpt10_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> timer11 */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__timer11 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_timer11_hwmod,
> - .clk = "gpt11_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> timer12 */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__timer12 = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_timer12_hwmod,
> - .clk = "gpt12_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> dss */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__dss = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_dss_core_hwmod,
> - .clk = "dss_ick",
> - .fw = {
> - .omap2 = {
> - .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
> - .flags = OMAP_FIREWALL_L4,
> - },
> - },
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> dss_dispc */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_dss_dispc_hwmod,
> - .clk = "dss_ick",
> - .fw = {
> - .omap2 = {
> - .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_DISPC_REGION,
> - .flags = OMAP_FIREWALL_L4,
> - },
> - },
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> dss_rfbi */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_dss_rfbi_hwmod,
> - .clk = "dss_ick",
> - .fw = {
> - .omap2 = {
> - .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
> - .flags = OMAP_FIREWALL_L4,
> - },
> - },
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> dss_venc */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_dss_venc_hwmod,
> - .clk = "dss_ick",
> - .fw = {
> - .omap2 = {
> - .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_VENC_REGION,
> - .flags = OMAP_FIREWALL_L4,
> - },
> - },
> - .flags = OCPIF_SWSUP_IDLE,
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4_core -> rng */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__rng = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_rng_hwmod,
> - .clk = "rng_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4 core -> sham interface */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__sham = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_sham_hwmod,
> - .clk = "sha_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -/* l4 core -> aes interface */
> -struct omap_hwmod_ocp_if omap2xxx_l4_core__aes = {
> - .master = &omap2xxx_l4_core_hwmod,
> - .slave = &omap2xxx_aes_hwmod,
> - .clk = "aes_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
> deleted file mode 100644
> index 4982e04ead53..000000000000
> --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
> +++ /dev/null
> @@ -1,668 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * omap_hwmod_2xxx_ipblock_data.c - common IP block data for OMAP2xxx
> - *
> - * Copyright (C) 2011 Nokia Corporation
> - * Paul Walmsley
> - */
> -
> -#include <linux/types.h>
> -
> -#include "omap_hwmod.h"
> -#include "omap_hwmod_common_data.h"
> -#include "cm-regbits-24xx.h"
> -#include "prm-regbits-24xx.h"
> -#include "wd_timer.h"
> -
> -/*
> - * 'dispc' class
> - * display controller
> - */
> -
> -static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = {
> - .rev_offs = 0x0000,
> - .sysc_offs = 0x0010,
> - .syss_offs = 0x0014,
> - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
> - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
> - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
> - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
> - .sysc_fields = &omap_hwmod_sysc_type1,
> -};
> -
> -static struct omap_hwmod_class omap2_dispc_hwmod_class = {
> - .name = "dispc",
> - .sysc = &omap2_dispc_sysc,
> -};
> -
> -/* OMAP2xxx Timer Common */
> -static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = {
> - .rev_offs = 0x0000,
> - .sysc_offs = 0x0010,
> - .syss_offs = 0x0014,
> - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
> - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
> - SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
> - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
> - .sysc_fields = &omap_hwmod_sysc_type1,
> -};
> -
> -static struct omap_hwmod_class omap2xxx_timer_hwmod_class = {
> - .name = "timer",
> - .sysc = &omap2xxx_timer_sysc,
> -};
> -
> -/*
> - * 'wd_timer' class
> - * 32-bit watchdog upward counter that generates a pulse on the reset pin on
> - * overflow condition
> - */
> -
> -static struct omap_hwmod_class_sysconfig omap2xxx_wd_timer_sysc = {
> - .rev_offs = 0x0000,
> - .sysc_offs = 0x0010,
> - .syss_offs = 0x0014,
> - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SOFTRESET |
> - SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
> - .sysc_fields = &omap_hwmod_sysc_type1,
> -};
> -
> -static struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class = {
> - .name = "wd_timer",
> - .sysc = &omap2xxx_wd_timer_sysc,
> - .pre_shutdown = &omap2_wd_timer_disable,
> - .reset = &omap2_wd_timer_reset,
> -};
> -
> -/*
> - * 'gpio' class
> - * general purpose io module
> - */
> -static struct omap_hwmod_class_sysconfig omap2xxx_gpio_sysc = {
> - .rev_offs = 0x0000,
> - .sysc_offs = 0x0010,
> - .syss_offs = 0x0014,
> - .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
> - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
> - SYSS_HAS_RESET_STATUS),
> - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
> - .sysc_fields = &omap_hwmod_sysc_type1,
> -};
> -
> -struct omap_hwmod_class omap2xxx_gpio_hwmod_class = {
> - .name = "gpio",
> - .sysc = &omap2xxx_gpio_sysc,
> -};
> -
> -/*
> - * 'mailbox' class
> - * mailbox module allowing communication between the on-chip processors
> - * using a queued mailbox-interrupt mechanism.
> - */
> -
> -static struct omap_hwmod_class_sysconfig omap2xxx_mailbox_sysc = {
> - .rev_offs = 0x000,
> - .sysc_offs = 0x010,
> - .syss_offs = 0x014,
> - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
> - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
> - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
> - .sysc_fields = &omap_hwmod_sysc_type1,
> -};
> -
> -struct omap_hwmod_class omap2xxx_mailbox_hwmod_class = {
> - .name = "mailbox",
> - .sysc = &omap2xxx_mailbox_sysc,
> -};
> -
> -/*
> - * 'mcspi' class
> - * multichannel serial port interface (mcspi) / master/slave synchronous serial
> - * bus
> - */
> -
> -static struct omap_hwmod_class_sysconfig omap2xxx_mcspi_sysc = {
> - .rev_offs = 0x0000,
> - .sysc_offs = 0x0010,
> - .syss_offs = 0x0014,
> - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
> - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
> - SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
> - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
> - .sysc_fields = &omap_hwmod_sysc_type1,
> -};
> -
> -struct omap_hwmod_class omap2xxx_mcspi_class = {
> - .name = "mcspi",
> - .sysc = &omap2xxx_mcspi_sysc,
> -};
> -
> -/*
> - * 'gpmc' class
> - * general purpose memory controller
> - */
> -
> -static struct omap_hwmod_class_sysconfig omap2xxx_gpmc_sysc = {
> - .rev_offs = 0x0000,
> - .sysc_offs = 0x0010,
> - .syss_offs = 0x0014,
> - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
> - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
> - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
> - .sysc_fields = &omap_hwmod_sysc_type1,
> -};
> -
> -static struct omap_hwmod_class omap2xxx_gpmc_hwmod_class = {
> - .name = "gpmc",
> - .sysc = &omap2xxx_gpmc_sysc,
> -};
> -
> -/*
> - * IP blocks
> - */
> -
> -/* L3 */
> -struct omap_hwmod omap2xxx_l3_main_hwmod = {
> - .name = "l3_main",
> - .class = &l3_hwmod_class,
> - .flags = HWMOD_NO_IDLEST,
> -};
> -
> -/* L4 CORE */
> -struct omap_hwmod omap2xxx_l4_core_hwmod = {
> - .name = "l4_core",
> - .class = &l4_hwmod_class,
> - .flags = HWMOD_NO_IDLEST,
> -};
> -
> -/* L4 WKUP */
> -struct omap_hwmod omap2xxx_l4_wkup_hwmod = {
> - .name = "l4_wkup",
> - .class = &l4_hwmod_class,
> - .flags = HWMOD_NO_IDLEST,
> -};
> -
> -/* MPU */
> -struct omap_hwmod omap2xxx_mpu_hwmod = {
> - .name = "mpu",
> - .class = &mpu_hwmod_class,
> - .main_clk = "mpu_ck",
> -};
> -
> -/* timer3 */
> -struct omap_hwmod omap2xxx_timer3_hwmod = {
> - .name = "timer3",
> - .main_clk = "gpt3_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
> - },
> - },
> - .class = &omap2xxx_timer_hwmod_class,
> - .flags = HWMOD_SET_DEFAULT_CLOCKACT,
> -};
> -
> -/* timer4 */
> -struct omap_hwmod omap2xxx_timer4_hwmod = {
> - .name = "timer4",
> - .main_clk = "gpt4_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
> - },
> - },
> - .class = &omap2xxx_timer_hwmod_class,
> - .flags = HWMOD_SET_DEFAULT_CLOCKACT,
> -};
> -
> -/* timer5 */
> -struct omap_hwmod omap2xxx_timer5_hwmod = {
> - .name = "timer5",
> - .main_clk = "gpt5_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
> - },
> - },
> - .class = &omap2xxx_timer_hwmod_class,
> - .flags = HWMOD_SET_DEFAULT_CLOCKACT,
> -};
> -
> -/* timer6 */
> -struct omap_hwmod omap2xxx_timer6_hwmod = {
> - .name = "timer6",
> - .main_clk = "gpt6_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
> - },
> - },
> - .class = &omap2xxx_timer_hwmod_class,
> - .flags = HWMOD_SET_DEFAULT_CLOCKACT,
> -};
> -
> -/* timer7 */
> -struct omap_hwmod omap2xxx_timer7_hwmod = {
> - .name = "timer7",
> - .main_clk = "gpt7_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
> - },
> - },
> - .class = &omap2xxx_timer_hwmod_class,
> - .flags = HWMOD_SET_DEFAULT_CLOCKACT,
> -};
> -
> -/* timer8 */
> -struct omap_hwmod omap2xxx_timer8_hwmod = {
> - .name = "timer8",
> - .main_clk = "gpt8_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
> - },
> - },
> - .class = &omap2xxx_timer_hwmod_class,
> - .flags = HWMOD_SET_DEFAULT_CLOCKACT,
> -};
> -
> -/* timer9 */
> -struct omap_hwmod omap2xxx_timer9_hwmod = {
> - .name = "timer9",
> - .main_clk = "gpt9_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
> - },
> - },
> - .class = &omap2xxx_timer_hwmod_class,
> - .flags = HWMOD_SET_DEFAULT_CLOCKACT,
> -};
> -
> -/* timer10 */
> -struct omap_hwmod omap2xxx_timer10_hwmod = {
> - .name = "timer10",
> - .main_clk = "gpt10_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
> - },
> - },
> - .class = &omap2xxx_timer_hwmod_class,
> - .flags = HWMOD_SET_DEFAULT_CLOCKACT,
> -};
> -
> -/* timer11 */
> -struct omap_hwmod omap2xxx_timer11_hwmod = {
> - .name = "timer11",
> - .main_clk = "gpt11_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
> - },
> - },
> - .class = &omap2xxx_timer_hwmod_class,
> - .flags = HWMOD_SET_DEFAULT_CLOCKACT,
> -};
> -
> -/* timer12 */
> -struct omap_hwmod omap2xxx_timer12_hwmod = {
> - .name = "timer12",
> - .main_clk = "gpt12_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
> - },
> - },
> - .class = &omap2xxx_timer_hwmod_class,
> - .flags = HWMOD_SET_DEFAULT_CLOCKACT,
> -};
> -
> -/* wd_timer2 */
> -struct omap_hwmod omap2xxx_wd_timer2_hwmod = {
> - .name = "wd_timer2",
> - .class = &omap2xxx_wd_timer_hwmod_class,
> - .main_clk = "mpu_wdt_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = WKUP_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT,
> - },
> - },
> -};
> -
> -/* UART1 */
> -
> -struct omap_hwmod omap2xxx_uart1_hwmod = {
> - .name = "uart1",
> - .main_clk = "uart1_fck",
> - .flags = DEBUG_OMAP2UART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT,
> - },
> - },
> - .class = &omap2_uart_class,
> -};
> -
> -/* UART2 */
> -
> -struct omap_hwmod omap2xxx_uart2_hwmod = {
> - .name = "uart2",
> - .main_clk = "uart2_fck",
> - .flags = DEBUG_OMAP2UART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT,
> - },
> - },
> - .class = &omap2_uart_class,
> -};
> -
> -/* UART3 */
> -
> -struct omap_hwmod omap2xxx_uart3_hwmod = {
> - .name = "uart3",
> - .main_clk = "uart3_fck",
> - .flags = DEBUG_OMAP2UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 2,
> - .idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT,
> - },
> - },
> - .class = &omap2_uart_class,
> -};
> -
> -/* dss */
> -
> -static struct omap_hwmod_opt_clk dss_opt_clks[] = {
> - /*
> - * The DSS HW needs all DSS clocks enabled during reset. The dss_core
> - * driver does not use these clocks.
> - */
> - { .role = "tv_clk", .clk = "dss_54m_fck" },
> - { .role = "sys_clk", .clk = "dss2_fck" },
> -};
> -
> -struct omap_hwmod omap2xxx_dss_core_hwmod = {
> - .name = "dss_core",
> - .class = &omap2_dss_hwmod_class,
> - .main_clk = "dss1_fck", /* instead of dss_fck */
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - },
> - },
> - .opt_clks = dss_opt_clks,
> - .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
> - .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
> -};
> -
> -struct omap_hwmod omap2xxx_dss_dispc_hwmod = {
> - .name = "dss_dispc",
> - .class = &omap2_dispc_hwmod_class,
> - .main_clk = "dss1_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - },
> - },
> - .flags = HWMOD_NO_IDLEST,
> - .dev_attr = &omap2_3_dss_dispc_dev_attr,
> -};
> -
> -static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
> - { .role = "ick", .clk = "dss_ick" },
> -};
> -
> -struct omap_hwmod omap2xxx_dss_rfbi_hwmod = {
> - .name = "dss_rfbi",
> - .class = &omap2_rfbi_hwmod_class,
> - .main_clk = "dss1_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - },
> - },
> - .opt_clks = dss_rfbi_opt_clks,
> - .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
> - .flags = HWMOD_NO_IDLEST,
> -};
> -
> -struct omap_hwmod omap2xxx_dss_venc_hwmod = {
> - .name = "dss_venc",
> - .class = &omap2_venc_hwmod_class,
> - .main_clk = "dss_54m_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - },
> - },
> - .flags = HWMOD_NO_IDLEST,
> -};
> -
> -/* gpio1 */
> -struct omap_hwmod omap2xxx_gpio1_hwmod = {
> - .name = "gpio1",
> - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
> - .main_clk = "gpios_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = WKUP_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
> - },
> - },
> - .class = &omap2xxx_gpio_hwmod_class,
> -};
> -
> -/* gpio2 */
> -struct omap_hwmod omap2xxx_gpio2_hwmod = {
> - .name = "gpio2",
> - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
> - .main_clk = "gpios_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = WKUP_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
> - },
> - },
> - .class = &omap2xxx_gpio_hwmod_class,
> -};
> -
> -/* gpio3 */
> -struct omap_hwmod omap2xxx_gpio3_hwmod = {
> - .name = "gpio3",
> - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
> - .main_clk = "gpios_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = WKUP_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
> - },
> - },
> - .class = &omap2xxx_gpio_hwmod_class,
> -};
> -
> -/* gpio4 */
> -struct omap_hwmod omap2xxx_gpio4_hwmod = {
> - .name = "gpio4",
> - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
> - .main_clk = "gpios_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = WKUP_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
> - },
> - },
> - .class = &omap2xxx_gpio_hwmod_class,
> -};
> -
> -/* mcspi1 */
> -struct omap_hwmod omap2xxx_mcspi1_hwmod = {
> - .name = "mcspi1",
> - .main_clk = "mcspi1_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_MCSPI1_SHIFT,
> - },
> - },
> - .class = &omap2xxx_mcspi_class,
> -};
> -
> -/* mcspi2 */
> -struct omap_hwmod omap2xxx_mcspi2_hwmod = {
> - .name = "mcspi2",
> - .main_clk = "mcspi2_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP24XX_ST_MCSPI2_SHIFT,
> - },
> - },
> - .class = &omap2xxx_mcspi_class,
> -};
> -
> -/* gpmc */
> -struct omap_hwmod omap2xxx_gpmc_hwmod = {
> - .name = "gpmc",
> - .class = &omap2xxx_gpmc_hwmod_class,
> - .main_clk = "gpmc_fck",
> - /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
> - .flags = HWMOD_NO_IDLEST | DEBUG_OMAP_GPMC_HWMOD_FLAGS,
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - },
> - },
> -};
> -
> -/* RNG */
> -
> -static struct omap_hwmod_class_sysconfig omap2_rng_sysc = {
> - .rev_offs = 0x3c,
> - .sysc_offs = 0x40,
> - .syss_offs = 0x44,
> - .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
> - SYSS_HAS_RESET_STATUS),
> - .sysc_fields = &omap_hwmod_sysc_type1,
> -};
> -
> -static struct omap_hwmod_class omap2_rng_hwmod_class = {
> - .name = "rng",
> - .sysc = &omap2_rng_sysc,
> -};
> -
> -struct omap_hwmod omap2xxx_rng_hwmod = {
> - .name = "rng",
> - .main_clk = "l4_ck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 4,
> - .idlest_idle_bit = OMAP24XX_ST_RNG_SHIFT,
> - },
> - },
> - /*
> - * XXX The first read from the SYSSTATUS register of the RNG
> - * after the SYSCONFIG SOFTRESET bit is set triggers an
> - * imprecise external abort. It's unclear why this happens.
> - * Until this is analyzed, skip the IP block reset.
> - */
> - .flags = HWMOD_INIT_NO_RESET,
> - .class = &omap2_rng_hwmod_class,
> -};
> -
> -/* SHAM */
> -
> -static struct omap_hwmod_class_sysconfig omap2_sham_sysc = {
> - .rev_offs = 0x5c,
> - .sysc_offs = 0x60,
> - .syss_offs = 0x64,
> - .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
> - SYSS_HAS_RESET_STATUS),
> - .sysc_fields = &omap_hwmod_sysc_type1,
> -};
> -
> -static struct omap_hwmod_class omap2xxx_sham_class = {
> - .name = "sham",
> - .sysc = &omap2_sham_sysc,
> -};
> -
> -struct omap_hwmod omap2xxx_sham_hwmod = {
> - .name = "sham",
> - .main_clk = "l4_ck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 4,
> - .idlest_idle_bit = OMAP24XX_ST_SHA_SHIFT,
> - },
> - },
> - .class = &omap2xxx_sham_class,
> -};
> -
> -/* AES */
> -
> -static struct omap_hwmod_class_sysconfig omap2_aes_sysc = {
> - .rev_offs = 0x44,
> - .sysc_offs = 0x48,
> - .syss_offs = 0x4c,
> - .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
> - SYSS_HAS_RESET_STATUS),
> - .sysc_fields = &omap_hwmod_sysc_type1,
> -};
> -
> -static struct omap_hwmod_class omap2xxx_aes_class = {
> - .name = "aes",
> - .sysc = &omap2_aes_sysc,
> -};
> -
> -struct omap_hwmod omap2xxx_aes_hwmod = {
> - .name = "aes",
> - .main_clk = "l4_ck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = CORE_MOD,
> - .idlest_reg_id = 4,
> - .idlest_idle_bit = OMAP24XX_ST_AES_SHIFT,
> - },
> - },
> - .class = &omap2xxx_aes_class,
> -};
> diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
> index 69dddc53e1d8..8b270cb3f64b 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
> +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
> @@ -15,68 +15,6 @@
> #include "common.h"
> #include "display.h"
>
> -/* Common IP block data across OMAP2xxx */
> -extern struct omap_hwmod omap2xxx_l3_main_hwmod;
> -extern struct omap_hwmod omap2xxx_l4_core_hwmod;
> -extern struct omap_hwmod omap2xxx_l4_wkup_hwmod;
> -extern struct omap_hwmod omap2xxx_mpu_hwmod;
> -extern struct omap_hwmod omap2xxx_timer3_hwmod;
> -extern struct omap_hwmod omap2xxx_timer4_hwmod;
> -extern struct omap_hwmod omap2xxx_timer5_hwmod;
> -extern struct omap_hwmod omap2xxx_timer6_hwmod;
> -extern struct omap_hwmod omap2xxx_timer7_hwmod;
> -extern struct omap_hwmod omap2xxx_timer8_hwmod;
> -extern struct omap_hwmod omap2xxx_timer9_hwmod;
> -extern struct omap_hwmod omap2xxx_timer10_hwmod;
> -extern struct omap_hwmod omap2xxx_timer11_hwmod;
> -extern struct omap_hwmod omap2xxx_timer12_hwmod;
> -extern struct omap_hwmod omap2xxx_wd_timer2_hwmod;
> -extern struct omap_hwmod omap2xxx_uart1_hwmod;
> -extern struct omap_hwmod omap2xxx_uart2_hwmod;
> -extern struct omap_hwmod omap2xxx_uart3_hwmod;
> -extern struct omap_hwmod omap2xxx_dss_core_hwmod;
> -extern struct omap_hwmod omap2xxx_dss_dispc_hwmod;
> -extern struct omap_hwmod omap2xxx_dss_rfbi_hwmod;
> -extern struct omap_hwmod omap2xxx_dss_venc_hwmod;
> -extern struct omap_hwmod omap2xxx_gpio1_hwmod;
> -extern struct omap_hwmod omap2xxx_gpio2_hwmod;
> -extern struct omap_hwmod omap2xxx_gpio3_hwmod;
> -extern struct omap_hwmod omap2xxx_gpio4_hwmod;
> -extern struct omap_hwmod omap2xxx_mcspi1_hwmod;
> -extern struct omap_hwmod omap2xxx_mcspi2_hwmod;
> -extern struct omap_hwmod omap2xxx_gpmc_hwmod;
> -extern struct omap_hwmod omap2xxx_rng_hwmod;
> -extern struct omap_hwmod omap2xxx_sham_hwmod;
> -extern struct omap_hwmod omap2xxx_aes_hwmod;
> -
> -/* Common interface data across OMAP2xxx */
> -extern struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core;
> -extern struct omap_hwmod_ocp_if omap2xxx_mpu__l3_main;
> -extern struct omap_hwmod_ocp_if omap2xxx_dss__l3;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__l4_wkup;
> -extern struct omap_hwmod_ocp_if omap2_l4_core__uart1;
> -extern struct omap_hwmod_ocp_if omap2_l4_core__uart2;
> -extern struct omap_hwmod_ocp_if omap2_l4_core__uart3;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi1;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi2;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer3;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer4;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer5;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer6;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer7;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer8;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer9;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer10;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer11;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer12;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__rng;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__sham;
> -extern struct omap_hwmod_ocp_if omap2xxx_l4_core__aes;
> -
> /* OMAP hwmod classes - forward declarations */
> extern struct omap_hwmod_class l3_hwmod_class;
> extern struct omap_hwmod_class l4_hwmod_class;
> @@ -88,10 +26,6 @@ extern struct omap_hwmod_class omap2_rfbi_hwmod_class;
> extern struct omap_hwmod_class omap2_venc_hwmod_class;
> extern struct omap_hwmod_class omap2_hdq1w_class;
>
> -extern struct omap_hwmod_class omap2xxx_gpio_hwmod_class;
> -extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class;
> -extern struct omap_hwmod_class omap2xxx_mcspi_class;
> -
> extern struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr;
>
> #endif
> diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c
> deleted file mode 100644
> index 18a448f938ea..000000000000
> --- a/arch/arm/mach-omap2/opp2420_data.c
> +++ /dev/null
> @@ -1,131 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * opp2420_data.c - old-style "OPP" table for OMAP2420
> - *
> - * Copyright (C) 2005-2009 Texas Instruments, Inc.
> - * Copyright (C) 2004-2009 Nokia Corporation
> - *
> - * Richard Woodruff <r-woodruff2@ti.com>
> - *
> - * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
> - * These configurations are characterized by voltage and speed for clocks.
> - * The device is only validated for certain combinations. One way to express
> - * these combinations is via the 'ratios' which the clocks operate with
> - * respect to each other. These ratio sets are for a given voltage/DPLL
> - * setting. All configurations can be described by a DPLL setting and a ratio.
> - *
> - * XXX Missing voltage data.
> - * XXX Missing 19.2MHz sys_clk rate sets (needed for N800/N810)
> - *
> - * THe format described in this file is deprecated. Once a reasonable
> - * OPP API exists, the data in this file should be converted to use it.
> - *
> - * This is technically part of the OMAP2xxx clock code.
> - *
> - * Considerable work is still needed to fully support dynamic frequency
> - * changes on OMAP2xxx-series chips. Readers interested in such a
> - * project are encouraged to review the Maemo Diablo RX-34 and RX-44
> - * kernel source at:
> - * http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
> - */
> -
> -#include <linux/kernel.h>
> -
> -#include "opp2xxx.h"
> -#include "sdrc.h"
> -#include "clock.h"
> -
> -/*
> - * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
> - * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
> - * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
> - * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
> - *
> - * Filling in table based on H4 boards available. There are quite a
> - * few more rate combinations which could be defined.
> - *
> - * When multiple values are defined the start up will try and choose
> - * the fastest one. If a 'fast' value is defined, then automatically,
> - * the /2 one should be included as it can be used. Generally having
> - * more than one fast set does not make sense, as static timings need
> - * to be changed to change the set. The exception is the bypass
> - * setting which is available for low power bypass.
> - *
> - * Note: This table needs to be sorted, fastest to slowest.
> - **/
> -const struct prcm_config omap2420_rate_table[] = {
> - /* PRCM I - FAST */
> - {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
> - RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
> - RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
> - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
> - RATE_IN_242X},
> -
> - /* PRCM II - FAST */
> - {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
> - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
> - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
> - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
> - RATE_IN_242X},
> -
> - {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
> - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
> - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
> - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
> - RATE_IN_242X},
> -
> - /* PRCM III - FAST */
> - {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
> - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
> - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
> - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
> - RATE_IN_242X},
> -
> - {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
> - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
> - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
> - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
> - RATE_IN_242X},
> -
> - /* PRCM II - SLOW */
> - {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
> - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
> - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
> - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
> - RATE_IN_242X},
> -
> - {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
> - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
> - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
> - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
> - RATE_IN_242X},
> -
> - /* PRCM III - SLOW */
> - {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
> - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
> - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
> - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
> - RATE_IN_242X},
> -
> - {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
> - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
> - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
> - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
> - RATE_IN_242X},
> -
> - /* PRCM-VII (boot-bypass) */
> - {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/
> - RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
> - RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
> - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
> - RATE_IN_242X},
> -
> - /* PRCM-VII (boot-bypass) */
> - {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */
> - RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
> - RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
> - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
> - RATE_IN_242X},
> -
> - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
> -};
> diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c
> deleted file mode 100644
> index ded8b566a23a..000000000000
> --- a/arch/arm/mach-omap2/opp2430_data.c
> +++ /dev/null
> @@ -1,136 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * opp2430_data.c - old-style "OPP" table for OMAP2430
> - *
> - * Copyright (C) 2005-2009 Texas Instruments, Inc.
> - * Copyright (C) 2004-2009 Nokia Corporation
> - *
> - * Richard Woodruff <r-woodruff2@ti.com>
> - *
> - * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
> - * These configurations are characterized by voltage and speed for clocks.
> - * The device is only validated for certain combinations. One way to express
> - * these combinations is via the 'ratios' which the clocks operate with
> - * respect to each other. These ratio sets are for a given voltage/DPLL
> - * setting. All configurations can be described by a DPLL setting and a ratio.
> - *
> - * 2430 differs from 2420 in that there are no more phase synchronizers used.
> - * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
> - * 2430 (iva2.1, NOdsp, mdm)
> - *
> - * XXX Missing voltage data.
> - * XXX Missing 19.2MHz sys_clk rate sets.
> - *
> - * THe format described in this file is deprecated. Once a reasonable
> - * OPP API exists, the data in this file should be converted to use it.
> - *
> - * This is technically part of the OMAP2xxx clock code.
> - */
> -
> -#include <linux/kernel.h>
> -
> -#include "opp2xxx.h"
> -#include "sdrc.h"
> -#include "clock.h"
> -
> -/*
> - * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
> - * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
> - * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
> - * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
> - *
> - * Filling in table based on 2430-SDPs variants available. There are
> - * quite a few more rate combinations which could be defined.
> - *
> - * When multiple values are defined the start up will try and choose
> - * the fastest one. If a 'fast' value is defined, then automatically,
> - * the /2 one should be included as it can be used. Generally having
> - * more than one fast set does not make sense, as static timings need
> - * to be changed to change the set. The exception is the bypass
> - * setting which is available for low power bypass.
> - *
> - * Note: This table needs to be sorted, fastest to slowest.
> - */
> -const struct prcm_config omap2430_rate_table[] = {
> - /* PRCM #4 - ratio2 (ES2.1) - FAST */
> - {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */
> - R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
> - R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
> - MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
> - SDRC_RFR_CTRL_133MHz,
> - RATE_IN_243X},
> -
> - /* PRCM #2 - ratio1 (ES2) - FAST */
> - {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
> - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
> - R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
> - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
> - SDRC_RFR_CTRL_165MHz,
> - RATE_IN_243X},
> -
> - /* PRCM #5a - ratio1 - FAST */
> - {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
> - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
> - R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
> - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
> - SDRC_RFR_CTRL_133MHz,
> - RATE_IN_243X},
> -
> - /* PRCM #5b - ratio1 - FAST */
> - {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
> - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
> - R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
> - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
> - SDRC_RFR_CTRL_100MHz,
> - RATE_IN_243X},
> -
> - /* PRCM #4 - ratio1 (ES2.1) - SLOW */
> - {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
> - R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
> - R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
> - MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
> - SDRC_RFR_CTRL_133MHz,
> - RATE_IN_243X},
> -
> - /* PRCM #2 - ratio1 (ES2) - SLOW */
> - {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */
> - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
> - R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
> - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
> - SDRC_RFR_CTRL_165MHz,
> - RATE_IN_243X},
> -
> - /* PRCM #5a - ratio1 - SLOW */
> - {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
> - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
> - R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
> - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
> - SDRC_RFR_CTRL_133MHz,
> - RATE_IN_243X},
> -
> - /* PRCM #5b - ratio1 - SLOW*/
> - {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */
> - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
> - R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
> - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
> - SDRC_RFR_CTRL_100MHz,
> - RATE_IN_243X},
> -
> - /* PRCM-boot/bypass */
> - {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13MHz */
> - RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
> - RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
> - MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
> - SDRC_RFR_CTRL_BYPASS,
> - RATE_IN_243X},
> -
> - /* PRCM-boot/bypass */
> - {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12MHz */
> - RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
> - RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
> - MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
> - SDRC_RFR_CTRL_BYPASS,
> - RATE_IN_243X},
> -
> - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
> -};
> diff --git a/arch/arm/mach-omap2/opp2xxx.h b/arch/arm/mach-omap2/opp2xxx.h
> deleted file mode 100644
> index a451182cdc02..000000000000
> --- a/arch/arm/mach-omap2/opp2xxx.h
> +++ /dev/null
> @@ -1,430 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -/*
> - * opp2xxx.h - macros for old-style OMAP2xxx "OPP" definitions
> - *
> - * Copyright (C) 2005-2009 Texas Instruments, Inc.
> - * Copyright (C) 2004-2009 Nokia Corporation
> - *
> - * Richard Woodruff <r-woodruff2@ti.com>
> - *
> - * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
> - * These configurations are characterized by voltage and speed for clocks.
> - * The device is only validated for certain combinations. One way to express
> - * these combinations is via the 'ratio's' which the clocks operate with
> - * respect to each other. These ratio sets are for a given voltage/DPLL
> - * setting. All configurations can be described by a DPLL setting and a ratio
> - * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
> - *
> - * 2430 differs from 2420 in that there are no more phase synchronizers used.
> - * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
> - * 2430 (iva2.1, NOdsp, mdm)
> - *
> - * XXX Missing voltage data.
> - *
> - * THe format described in this file is deprecated. Once a reasonable
> - * OPP API exists, the data in this file should be converted to use it.
> - *
> - * This is technically part of the OMAP2xxx clock code.
> - */
> -
> -#ifndef __ARCH_ARM_MACH_OMAP2_OPP2XXX_H
> -#define __ARCH_ARM_MACH_OMAP2_OPP2XXX_H
> -
> -/**
> - * struct prcm_config - define clock rates on a per-OPP basis (24xx)
> - *
> - * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
> - * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
> - * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
> - *
> - * This is deprecated. As soon as we have a decent OPP API, we should
> - * move all this stuff to it.
> - */
> -struct prcm_config {
> - unsigned long xtal_speed; /* crystal rate */
> - unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */
> - unsigned long mpu_speed; /* speed of MPU */
> - unsigned long cm_clksel_mpu; /* mpu divider */
> - unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */
> - unsigned long cm_clksel_gfx; /* gfx dividers */
> - unsigned long cm_clksel1_core; /* major subsystem dividers */
> - unsigned long cm_clksel1_pll; /* m,n */
> - unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */
> - unsigned long cm_clksel_mdm; /* modem dividers 2430 only */
> - unsigned long base_sdrc_rfr; /* base refresh timing for a set */
> - unsigned short flags;
> -};
> -
> -
> -/* Core fields for cm_clksel, not ratio governed */
> -#define RX_CLKSEL_DSS1 (0x10 << 8)
> -#define RX_CLKSEL_DSS2 (0x0 << 13)
> -#define RX_CLKSEL_SSI (0x5 << 20)
> -
> -/*-------------------------------------------------------------------------
> - * Voltage/DPLL ratios
> - *-------------------------------------------------------------------------*/
> -
> -/* 2430 Ratio's, 2430-Ratio Config 1 */
> -#define R1_CLKSEL_L3 (4 << 0)
> -#define R1_CLKSEL_L4 (2 << 5)
> -#define R1_CLKSEL_USB (4 << 25)
> -#define R1_CM_CLKSEL1_CORE_VAL (R1_CLKSEL_USB | RX_CLKSEL_SSI | \
> - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
> - R1_CLKSEL_L4 | R1_CLKSEL_L3)
> -#define R1_CLKSEL_MPU (2 << 0)
> -#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU
> -#define R1_CLKSEL_DSP (2 << 0)
> -#define R1_CLKSEL_DSP_IF (2 << 5)
> -#define R1_CM_CLKSEL_DSP_VAL (R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF)
> -#define R1_CLKSEL_GFX (2 << 0)
> -#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX
> -#define R1_CLKSEL_MDM (4 << 0)
> -#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM
> -
> -/* 2430-Ratio Config 2 */
> -#define R2_CLKSEL_L3 (6 << 0)
> -#define R2_CLKSEL_L4 (2 << 5)
> -#define R2_CLKSEL_USB (2 << 25)
> -#define R2_CM_CLKSEL1_CORE_VAL (R2_CLKSEL_USB | RX_CLKSEL_SSI | \
> - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
> - R2_CLKSEL_L4 | R2_CLKSEL_L3)
> -#define R2_CLKSEL_MPU (2 << 0)
> -#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU
> -#define R2_CLKSEL_DSP (2 << 0)
> -#define R2_CLKSEL_DSP_IF (3 << 5)
> -#define R2_CM_CLKSEL_DSP_VAL (R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF)
> -#define R2_CLKSEL_GFX (2 << 0)
> -#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX
> -#define R2_CLKSEL_MDM (6 << 0)
> -#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM
> -
> -/* 2430-Ratio Bootm (BYPASS) */
> -#define RB_CLKSEL_L3 (1 << 0)
> -#define RB_CLKSEL_L4 (1 << 5)
> -#define RB_CLKSEL_USB (1 << 25)
> -#define RB_CM_CLKSEL1_CORE_VAL (RB_CLKSEL_USB | RX_CLKSEL_SSI | \
> - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
> - RB_CLKSEL_L4 | RB_CLKSEL_L3)
> -#define RB_CLKSEL_MPU (1 << 0)
> -#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU
> -#define RB_CLKSEL_DSP (1 << 0)
> -#define RB_CLKSEL_DSP_IF (1 << 5)
> -#define RB_CM_CLKSEL_DSP_VAL (RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF)
> -#define RB_CLKSEL_GFX (1 << 0)
> -#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX
> -#define RB_CLKSEL_MDM (1 << 0)
> -#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM
> -
> -/* 2420 Ratio Equivalents */
> -#define RXX_CLKSEL_VLYNQ (0x12 << 15)
> -#define RXX_CLKSEL_SSI (0x8 << 20)
> -
> -/* 2420-PRCM III 532MHz core */
> -#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */
> -#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */
> -#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */
> -#define RIII_CM_CLKSEL1_CORE_VAL (RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
> - RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
> - RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
> - RIII_CLKSEL_L3)
> -#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */
> -#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU
> -#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */
> -#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */
> -#define RIII_SYNC_DSP (1 << 7) /* Enable sync */
> -#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */
> -#define RIII_SYNC_IVA (1 << 13) /* Enable sync */
> -#define RIII_CM_CLKSEL_DSP_VAL (RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
> - RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
> - RIII_CLKSEL_DSP)
> -#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */
> -#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX
> -
> -/* 2420-PRCM II 600MHz core */
> -#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */
> -#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */
> -#define RII_CLKSEL_USB (2 << 25) /* 50MHz */
> -#define RII_CM_CLKSEL1_CORE_VAL (RII_CLKSEL_USB | RXX_CLKSEL_SSI | \
> - RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
> - RX_CLKSEL_DSS1 | RII_CLKSEL_L4 | \
> - RII_CLKSEL_L3)
> -#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */
> -#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU
> -#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */
> -#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */
> -#define RII_SYNC_DSP (0 << 7) /* Bypass sync */
> -#define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */
> -#define RII_SYNC_IVA (0 << 13) /* Bypass sync */
> -#define RII_CM_CLKSEL_DSP_VAL (RII_SYNC_IVA | RII_CLKSEL_IVA | \
> - RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
> - RII_CLKSEL_DSP)
> -#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */
> -#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX
> -
> -/* 2420-PRCM I 660MHz core */
> -#define RI_CLKSEL_L3 (4 << 0) /* 165MHz */
> -#define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */
> -#define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */
> -#define RI_CM_CLKSEL1_CORE_VAL (RI_CLKSEL_USB | \
> - RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
> - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
> - RI_CLKSEL_L4 | RI_CLKSEL_L3)
> -#define RI_CLKSEL_MPU (2 << 0) /* 330MHz */
> -#define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU
> -#define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */
> -#define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */
> -#define RI_SYNC_DSP (1 << 7) /* Activate sync */
> -#define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */
> -#define RI_SYNC_IVA (0 << 13) /* Bypass sync */
> -#define RI_CM_CLKSEL_DSP_VAL (RI_SYNC_IVA | RI_CLKSEL_IVA | \
> - RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
> - RI_CLKSEL_DSP)
> -#define RI_CLKSEL_GFX (1 << 0) /* 165MHz */
> -#define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX
> -
> -/* 2420-PRCM VII (boot) */
> -#define RVII_CLKSEL_L3 (1 << 0)
> -#define RVII_CLKSEL_L4 (1 << 5)
> -#define RVII_CLKSEL_DSS1 (1 << 8)
> -#define RVII_CLKSEL_DSS2 (0 << 13)
> -#define RVII_CLKSEL_VLYNQ (1 << 15)
> -#define RVII_CLKSEL_SSI (1 << 20)
> -#define RVII_CLKSEL_USB (1 << 25)
> -
> -#define RVII_CM_CLKSEL1_CORE_VAL (RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
> - RVII_CLKSEL_VLYNQ | \
> - RVII_CLKSEL_DSS2 | RVII_CLKSEL_DSS1 | \
> - RVII_CLKSEL_L4 | RVII_CLKSEL_L3)
> -
> -#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */
> -#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU
> -
> -#define RVII_CLKSEL_DSP (1 << 0)
> -#define RVII_CLKSEL_DSP_IF (1 << 5)
> -#define RVII_SYNC_DSP (0 << 7)
> -#define RVII_CLKSEL_IVA (1 << 8)
> -#define RVII_SYNC_IVA (0 << 13)
> -#define RVII_CM_CLKSEL_DSP_VAL (RVII_SYNC_IVA | RVII_CLKSEL_IVA | \
> - RVII_SYNC_DSP | RVII_CLKSEL_DSP_IF | \
> - RVII_CLKSEL_DSP)
> -
> -#define RVII_CLKSEL_GFX (1 << 0)
> -#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX
> -
> -/*-------------------------------------------------------------------------
> - * 2430 Target modes: Along with each configuration the CPU has several
> - * modes which goes along with them. Modes mainly are the addition of
> - * describe DPLL combinations to go along with a ratio.
> - *-------------------------------------------------------------------------*/
> -
> -/* Hardware governed */
> -#define MX_48M_SRC (0 << 3)
> -#define MX_54M_SRC (0 << 5)
> -#define MX_APLLS_CLIKIN_12 (3 << 23)
> -#define MX_APLLS_CLIKIN_13 (2 << 23)
> -#define MX_APLLS_CLIKIN_19_2 (0 << 23)
> -
> -/*
> - * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
> - * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz
> - */
> -#define M5A_DPLL_MULT_12 (133 << 12)
> -#define M5A_DPLL_DIV_12 (5 << 8)
> -#define M5A_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
> - M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
> - MX_APLLS_CLIKIN_12)
> -#define M5A_DPLL_MULT_13 (61 << 12)
> -#define M5A_DPLL_DIV_13 (2 << 8)
> -#define M5A_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
> - M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
> - MX_APLLS_CLIKIN_13)
> -#define M5A_DPLL_MULT_19 (55 << 12)
> -#define M5A_DPLL_DIV_19 (3 << 8)
> -#define M5A_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
> - M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
> - MX_APLLS_CLIKIN_19_2)
> -/* #5b (ratio1) target DPLL = 200*2 = 400MHz */
> -#define M5B_DPLL_MULT_12 (50 << 12)
> -#define M5B_DPLL_DIV_12 (2 << 8)
> -#define M5B_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
> - M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
> - MX_APLLS_CLIKIN_12)
> -#define M5B_DPLL_MULT_13 (200 << 12)
> -#define M5B_DPLL_DIV_13 (12 << 8)
> -
> -#define M5B_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
> - M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
> - MX_APLLS_CLIKIN_13)
> -#define M5B_DPLL_MULT_19 (125 << 12)
> -#define M5B_DPLL_DIV_19 (31 << 8)
> -#define M5B_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
> - M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
> - MX_APLLS_CLIKIN_19_2)
> -/*
> - * #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
> - */
> -#define M4_DPLL_MULT_12 (133 << 12)
> -#define M4_DPLL_DIV_12 (3 << 8)
> -#define M4_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
> - M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
> - MX_APLLS_CLIKIN_12)
> -
> -#define M4_DPLL_MULT_13 (399 << 12)
> -#define M4_DPLL_DIV_13 (12 << 8)
> -#define M4_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
> - M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
> - MX_APLLS_CLIKIN_13)
> -
> -#define M4_DPLL_MULT_19 (145 << 12)
> -#define M4_DPLL_DIV_19 (6 << 8)
> -#define M4_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
> - M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
> - MX_APLLS_CLIKIN_19_2)
> -
> -/*
> - * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz
> - */
> -#define M3_DPLL_MULT_12 (55 << 12)
> -#define M3_DPLL_DIV_12 (1 << 8)
> -#define M3_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
> - M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
> - MX_APLLS_CLIKIN_12)
> -#define M3_DPLL_MULT_13 (76 << 12)
> -#define M3_DPLL_DIV_13 (2 << 8)
> -#define M3_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
> - M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
> - MX_APLLS_CLIKIN_13)
> -#define M3_DPLL_MULT_19 (17 << 12)
> -#define M3_DPLL_DIV_19 (0 << 8)
> -#define M3_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
> - M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
> - MX_APLLS_CLIKIN_19_2)
> -
> -/*
> - * #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
> - */
> -#define M2_DPLL_MULT_12 (55 << 12)
> -#define M2_DPLL_DIV_12 (1 << 8)
> -#define M2_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
> - M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
> - MX_APLLS_CLIKIN_12)
> -
> -/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
> - * relock time issue */
> -/* Core frequency changed from 330/165 to 329/164 MHz*/
> -#define M2_DPLL_MULT_13 (76 << 12)
> -#define M2_DPLL_DIV_13 (2 << 8)
> -#define M2_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
> - M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
> - MX_APLLS_CLIKIN_13)
> -
> -#define M2_DPLL_MULT_19 (17 << 12)
> -#define M2_DPLL_DIV_19 (0 << 8)
> -#define M2_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
> - M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
> - MX_APLLS_CLIKIN_19_2)
> -
> -/* boot (boot) */
> -#define MB_DPLL_MULT (1 << 12)
> -#define MB_DPLL_DIV (0 << 8)
> -#define MB_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
> - MB_DPLL_DIV | MB_DPLL_MULT | \
> - MX_APLLS_CLIKIN_12)
> -
> -#define MB_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
> - MB_DPLL_DIV | MB_DPLL_MULT | \
> - MX_APLLS_CLIKIN_13)
> -
> -#define MB_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
> - MB_DPLL_DIV | MB_DPLL_MULT | \
> - MX_APLLS_CLIKIN_19)
> -
> -/*
> - * 2430 - chassis (sedna)
> - * 165 (ratio1) same as above #2
> - * 150 (ratio1)
> - * 133 (ratio2) same as above #4
> - * 110 (ratio2) same as above #3
> - * 104 (ratio2)
> - * boot (boot)
> - */
> -
> -/* PRCM I target DPLL = 2*330MHz = 660MHz */
> -#define MI_DPLL_MULT_12 (55 << 12)
> -#define MI_DPLL_DIV_12 (1 << 8)
> -#define MI_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
> - MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
> - MX_APLLS_CLIKIN_12)
> -
> -/*
> - * 2420 Equivalent - mode registers
> - * PRCM II , target DPLL = 2*300MHz = 600MHz
> - */
> -#define MII_DPLL_MULT_12 (50 << 12)
> -#define MII_DPLL_DIV_12 (1 << 8)
> -#define MII_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
> - MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
> - MX_APLLS_CLIKIN_12)
> -#define MII_DPLL_MULT_13 (300 << 12)
> -#define MII_DPLL_DIV_13 (12 << 8)
> -#define MII_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
> - MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
> - MX_APLLS_CLIKIN_13)
> -
> -/* PRCM III target DPLL = 2*266 = 532MHz*/
> -#define MIII_DPLL_MULT_12 (133 << 12)
> -#define MIII_DPLL_DIV_12 (5 << 8)
> -#define MIII_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
> - MIII_DPLL_DIV_12 | \
> - MIII_DPLL_MULT_12 | MX_APLLS_CLIKIN_12)
> -#define MIII_DPLL_MULT_13 (266 << 12)
> -#define MIII_DPLL_DIV_13 (12 << 8)
> -#define MIII_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
> - MIII_DPLL_DIV_13 | \
> - MIII_DPLL_MULT_13 | MX_APLLS_CLIKIN_13)
> -
> -/* PRCM VII (boot bypass) */
> -#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL
> -#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL
> -
> -/* High and low operation value */
> -#define MX_CLKSEL2_PLL_2x_VAL (2 << 0)
> -#define MX_CLKSEL2_PLL_1x_VAL (1 << 0)
> -
> -/* MPU speed defines */
> -#define S12M 12000000
> -#define S13M 13000000
> -#define S19M 19200000
> -#define S26M 26000000
> -#define S100M 100000000
> -#define S133M 133000000
> -#define S150M 150000000
> -#define S164M 164000000
> -#define S165M 165000000
> -#define S199M 199000000
> -#define S200M 200000000
> -#define S266M 266000000
> -#define S300M 300000000
> -#define S329M 329000000
> -#define S330M 330000000
> -#define S399M 399000000
> -#define S400M 400000000
> -#define S532M 532000000
> -#define S600M 600000000
> -#define S658M 658000000
> -#define S660M 660000000
> -#define S798M 798000000
> -
> -
> -extern const struct prcm_config omap2420_rate_table[];
> -
> -#ifdef CONFIG_SOC_OMAP2430
> -extern const struct prcm_config omap2430_rate_table[];
> -#else
> -#define omap2430_rate_table NULL
> -#endif
> -extern const struct prcm_config *rate_table;
> -extern const struct prcm_config *curr_prcm_set;
> -
> -#endif
> diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
> index b947bacf23a3..8b8021b297aa 100644
> --- a/arch/arm/mach-omap2/pdata-quirks.c
> +++ b/arch/arm/mach-omap2/pdata-quirks.c
> @@ -27,7 +27,6 @@
>
> #include "clockdomain.h"
> #include "common.h"
> -#include "common-board-devices.h"
> #include "control.h"
> #include "omap_device.h"
> #include "omap-secure.h"
> @@ -42,15 +41,6 @@ struct pdata_init {
>
> static struct of_dev_auxdata omap_auxdata_lookup[];
>
> -#ifdef CONFIG_MACH_NOKIA_N8X0
> -static void __init omap2420_n8x0_legacy_init(void)
> -{
> - omap_auxdata_lookup[0].platform_data = n8x0_legacy_init();
> -}
> -#else
> -#define omap2420_n8x0_legacy_init NULL
> -#endif
> -
> #ifdef CONFIG_ARCH_OMAP3
> /*
> * Configures GPIOs 126, 127 and 129 to 1.8V mode instead of 3.0V
> @@ -431,26 +421,9 @@ static void __init omap3_mcbsp_init(void)
> static void __init omap3_mcbsp_init(void) {}
> #endif
>
> -/*
> - * Few boards still need auxdata populated before we populate
> - * the dev entries in of_platform_populate().
> - */
> -static struct pdata_init auxdata_quirks[] __initdata = {
> -#ifdef CONFIG_SOC_OMAP2420
> - { "nokia,n800", omap2420_n8x0_legacy_init, },
> - { "nokia,n810", omap2420_n8x0_legacy_init, },
> - { "nokia,n810-wimax", omap2420_n8x0_legacy_init, },
> -#endif
> - { /* sentinel */ },
> -};
> -
> struct omap_sr_data __maybe_unused omap_sr_pdata[OMAP_SR_NR];
>
> static struct of_dev_auxdata omap_auxdata_lookup[] = {
> -#ifdef CONFIG_MACH_NOKIA_N8X0
> - OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL),
> - OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data),
> -#endif
> #ifdef CONFIG_ARCH_OMAP3
> OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
> &omap3_iommu_pdata),
> @@ -560,13 +533,11 @@ void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
> * We still need this for omap2420 and omap3 PM to work, others are
> * using drivers/misc/sram.c already.
> */
> - if (of_machine_is_compatible("ti,omap2420") ||
> - of_machine_is_compatible("ti,omap3"))
> + if (IS_ENABLED(CONFIG_ARCH_OMAP3) &&
> + of_machine_is_compatible("ti,omap3")) {
> omap_sdrc_init(NULL, NULL);
> -
> - if (of_machine_is_compatible("ti,omap3"))
> omap3_mcbsp_init();
> - pdata_quirks_check(auxdata_quirks);
> + }
>
> pdata_quirks_init_clocks(omap_dt_match_table);
>
> diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
> index f97ff93f2fb4..5751b85e9ffb 100644
> --- a/arch/arm/mach-omap2/pm.h
> +++ b/arch/arm/mach-omap2/pm.h
> @@ -43,11 +43,6 @@ extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
> #define pm_dbg_update_time(pwrdm, prev) do {} while (0);
> #endif /* CONFIG_PM_DEBUG */
>
> -/* 24xx */
> -extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
> - void __iomem *sdrc_power);
> -extern unsigned int omap24xx_cpu_suspend_sz;
> -
> /* 3xxx */
> extern void omap34xx_cpu_suspend(int save_state);
>
> diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
> index fbc89999460b..eaf6d1104dc2 100644
> --- a/arch/arm/mach-omap2/powerdomain.h
> +++ b/arch/arm/mach-omap2/powerdomain.h
> @@ -244,8 +244,6 @@ int pwrdm_post_transition(struct powerdomain *pwrdm);
>
> extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 state);
>
> -extern void omap242x_powerdomains_init(void);
> -extern void omap243x_powerdomains_init(void);
> extern void omap3xxx_powerdomains_init(void);
> extern void am33xx_powerdomains_init(void);
> extern void omap44xx_powerdomains_init(void);
> @@ -253,7 +251,6 @@ extern void omap54xx_powerdomains_init(void);
> extern void dra7xx_powerdomains_init(void);
> void am43xx_powerdomains_init(void);
>
> -extern struct pwrdm_ops omap2_pwrdm_operations;
> extern struct pwrdm_ops omap3_pwrdm_operations;
> extern struct pwrdm_ops am33xx_pwrdm_operations;
> extern struct pwrdm_ops omap4_pwrdm_operations;
> diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c
> deleted file mode 100644
> index fa259adbdc61..000000000000
> --- a/arch/arm/mach-omap2/powerdomains2xxx_data.c
> +++ /dev/null
> @@ -1,134 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * OMAP2XXX powerdomain definitions
> - *
> - * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
> - * Copyright (C) 2007-2011 Nokia Corporation
> - *
> - * Paul Walmsley, Jouni Högander
> - */
> -
> -#include <linux/kernel.h>
> -#include <linux/init.h>
> -
> -#include "soc.h"
> -#include "powerdomain.h"
> -#include "powerdomains2xxx_3xxx_data.h"
> -
> -#include "prcm-common.h"
> -#include "prm2xxx_3xxx.h"
> -#include "prm-regbits-24xx.h"
> -
> -/* 24XX powerdomains and dependencies */
> -
> -/* Powerdomains */
> -
> -static struct powerdomain dsp_pwrdm = {
> - .name = "dsp_pwrdm",
> - .prcm_offs = OMAP24XX_DSP_MOD,
> - .pwrsts = PWRSTS_OFF_RET_ON,
> - .pwrsts_logic_ret = PWRSTS_RET,
> - .banks = 1,
> - .pwrsts_mem_ret = {
> - [0] = PWRSTS_RET,
> - },
> - .pwrsts_mem_on = {
> - [0] = PWRSTS_ON,
> - },
> - .voltdm = { .name = "core" },
> -};
> -
> -static struct powerdomain mpu_24xx_pwrdm = {
> - .name = "mpu_pwrdm",
> - .prcm_offs = MPU_MOD,
> - .pwrsts = PWRSTS_OFF_RET_ON,
> - .pwrsts_logic_ret = PWRSTS_OFF_RET,
> - .banks = 1,
> - .pwrsts_mem_ret = {
> - [0] = PWRSTS_RET,
> - },
> - .pwrsts_mem_on = {
> - [0] = PWRSTS_ON,
> - },
> - .voltdm = { .name = "core" },
> -};
> -
> -static struct powerdomain core_24xx_pwrdm = {
> - .name = "core_pwrdm",
> - .prcm_offs = CORE_MOD,
> - .pwrsts = PWRSTS_OFF_RET_ON,
> - .pwrsts_logic_ret = PWRSTS_RET,
> - .banks = 3,
> - .pwrsts_mem_ret = {
> - [0] = PWRSTS_OFF_RET, /* MEM1RETSTATE */
> - [1] = PWRSTS_OFF_RET, /* MEM2RETSTATE */
> - [2] = PWRSTS_OFF_RET, /* MEM3RETSTATE */
> - },
> - .pwrsts_mem_on = {
> - [0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
> - [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
> - [2] = PWRSTS_OFF_RET_ON, /* MEM3ONSTATE */
> - },
> - .voltdm = { .name = "core" },
> -};
> -
> -
> -/*
> - * 2430-specific powerdomains
> - */
> -
> -/* XXX 2430 KILLDOMAINWKUP bit? No current users apparently */
> -
> -static struct powerdomain mdm_pwrdm = {
> - .name = "mdm_pwrdm",
> - .prcm_offs = OMAP2430_MDM_MOD,
> - .pwrsts = PWRSTS_OFF_RET_ON,
> - .pwrsts_logic_ret = PWRSTS_RET,
> - .banks = 1,
> - .pwrsts_mem_ret = {
> - [0] = PWRSTS_RET, /* MEMRETSTATE */
> - },
> - .pwrsts_mem_on = {
> - [0] = PWRSTS_ON, /* MEMONSTATE */
> - },
> - .voltdm = { .name = "core" },
> -};
> -
> -/*
> - *
> - */
> -
> -static struct powerdomain *powerdomains_omap24xx[] __initdata = {
> - &wkup_omap2_pwrdm,
> - &gfx_omap2_pwrdm,
> - &dsp_pwrdm,
> - &mpu_24xx_pwrdm,
> - &core_24xx_pwrdm,
> - NULL
> -};
> -
> -static struct powerdomain *powerdomains_omap2430[] __initdata = {
> - &mdm_pwrdm,
> - NULL
> -};
> -
> -void __init omap242x_powerdomains_init(void)
> -{
> - if (!cpu_is_omap2420())
> - return;
> -
> - pwrdm_register_platform_funcs(&omap2_pwrdm_operations);
> - pwrdm_register_pwrdms(powerdomains_omap24xx);
> - pwrdm_complete_init();
> -}
> -
> -void __init omap243x_powerdomains_init(void)
> -{
> - if (!cpu_is_omap2430())
> - return;
> -
> - pwrdm_register_platform_funcs(&omap2_pwrdm_operations);
> - pwrdm_register_pwrdms(powerdomains_omap24xx);
> - pwrdm_register_pwrdms(powerdomains_omap2430);
> - pwrdm_complete_init();
> -}
> diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
> index 5e3544a63526..e326bb6a09db 100644
> --- a/arch/arm/mach-omap2/prcm-common.h
> +++ b/arch/arm/mach-omap2/prcm-common.h
> @@ -27,12 +27,6 @@
> #define PLL_MOD 0x500
>
>
> -/* Chip-specific module offsets */
> -#define OMAP24XX_GR_MOD OCP_MOD
> -#define OMAP24XX_DSP_MOD 0x800
> -
> -#define OMAP2430_MDM_MOD 0xc00
> -
> /* IVA2 module is < base on 3430 */
> #define OMAP3430_IVA2_MOD -0x800
> #define OMAP3430ES2_SGX_MOD GFX_MOD
> @@ -63,147 +57,6 @@
> #define TI816X_PRM_SGX_MOD 0x0f00
> #define TI81XX_PRM_ALWON_MOD 0x1800
>
> -/* 24XX register bits shared between CM & PRM registers */
> -
> -/* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
> -#define OMAP2420_EN_MMC_SHIFT 26
> -#define OMAP2420_EN_MMC_MASK (1 << 26)
> -#define OMAP24XX_EN_UART2_SHIFT 22
> -#define OMAP24XX_EN_UART2_MASK (1 << 22)
> -#define OMAP24XX_EN_UART1_SHIFT 21
> -#define OMAP24XX_EN_UART1_MASK (1 << 21)
> -#define OMAP24XX_EN_MCSPI2_SHIFT 18
> -#define OMAP24XX_EN_MCSPI2_MASK (1 << 18)
> -#define OMAP24XX_EN_MCSPI1_SHIFT 17
> -#define OMAP24XX_EN_MCSPI1_MASK (1 << 17)
> -#define OMAP24XX_EN_MCBSP2_SHIFT 16
> -#define OMAP24XX_EN_MCBSP2_MASK (1 << 16)
> -#define OMAP24XX_EN_MCBSP1_SHIFT 15
> -#define OMAP24XX_EN_MCBSP1_MASK (1 << 15)
> -#define OMAP24XX_EN_GPT12_SHIFT 14
> -#define OMAP24XX_EN_GPT12_MASK (1 << 14)
> -#define OMAP24XX_EN_GPT11_SHIFT 13
> -#define OMAP24XX_EN_GPT11_MASK (1 << 13)
> -#define OMAP24XX_EN_GPT10_SHIFT 12
> -#define OMAP24XX_EN_GPT10_MASK (1 << 12)
> -#define OMAP24XX_EN_GPT9_SHIFT 11
> -#define OMAP24XX_EN_GPT9_MASK (1 << 11)
> -#define OMAP24XX_EN_GPT8_SHIFT 10
> -#define OMAP24XX_EN_GPT8_MASK (1 << 10)
> -#define OMAP24XX_EN_GPT7_SHIFT 9
> -#define OMAP24XX_EN_GPT7_MASK (1 << 9)
> -#define OMAP24XX_EN_GPT6_SHIFT 8
> -#define OMAP24XX_EN_GPT6_MASK (1 << 8)
> -#define OMAP24XX_EN_GPT5_SHIFT 7
> -#define OMAP24XX_EN_GPT5_MASK (1 << 7)
> -#define OMAP24XX_EN_GPT4_SHIFT 6
> -#define OMAP24XX_EN_GPT4_MASK (1 << 6)
> -#define OMAP24XX_EN_GPT3_SHIFT 5
> -#define OMAP24XX_EN_GPT3_MASK (1 << 5)
> -#define OMAP24XX_EN_GPT2_SHIFT 4
> -#define OMAP24XX_EN_GPT2_MASK (1 << 4)
> -#define OMAP2420_EN_VLYNQ_SHIFT 3
> -#define OMAP2420_EN_VLYNQ_MASK (1 << 3)
> -
> -/* CM_FCLKEN2_CORE, CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
> -#define OMAP2430_EN_GPIO5_SHIFT 10
> -#define OMAP2430_EN_GPIO5_MASK (1 << 10)
> -#define OMAP2430_EN_MCSPI3_SHIFT 9
> -#define OMAP2430_EN_MCSPI3_MASK (1 << 9)
> -#define OMAP2430_EN_MMCHS2_SHIFT 8
> -#define OMAP2430_EN_MMCHS2_MASK (1 << 8)
> -#define OMAP2430_EN_MMCHS1_SHIFT 7
> -#define OMAP2430_EN_MMCHS1_MASK (1 << 7)
> -#define OMAP24XX_EN_UART3_SHIFT 2
> -#define OMAP24XX_EN_UART3_MASK (1 << 2)
> -#define OMAP24XX_EN_USB_SHIFT 0
> -#define OMAP24XX_EN_USB_MASK (1 << 0)
> -
> -/* CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
> -#define OMAP2430_EN_MDM_INTC_SHIFT 11
> -#define OMAP2430_EN_MDM_INTC_MASK (1 << 11)
> -#define OMAP2430_EN_USBHS_SHIFT 6
> -#define OMAP2430_EN_USBHS_MASK (1 << 6)
> -#define OMAP24XX_EN_GPMC_SHIFT 1
> -#define OMAP24XX_EN_GPMC_MASK (1 << 1)
> -
> -/* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */
> -#define OMAP2420_ST_MMC_SHIFT 26
> -#define OMAP2420_ST_MMC_MASK (1 << 26)
> -#define OMAP24XX_ST_UART2_SHIFT 22
> -#define OMAP24XX_ST_UART2_MASK (1 << 22)
> -#define OMAP24XX_ST_UART1_SHIFT 21
> -#define OMAP24XX_ST_UART1_MASK (1 << 21)
> -#define OMAP24XX_ST_MCSPI2_SHIFT 18
> -#define OMAP24XX_ST_MCSPI2_MASK (1 << 18)
> -#define OMAP24XX_ST_MCSPI1_SHIFT 17
> -#define OMAP24XX_ST_MCSPI1_MASK (1 << 17)
> -#define OMAP24XX_ST_MCBSP2_SHIFT 16
> -#define OMAP24XX_ST_MCBSP2_MASK (1 << 16)
> -#define OMAP24XX_ST_MCBSP1_SHIFT 15
> -#define OMAP24XX_ST_MCBSP1_MASK (1 << 15)
> -#define OMAP24XX_ST_GPT12_SHIFT 14
> -#define OMAP24XX_ST_GPT12_MASK (1 << 14)
> -#define OMAP24XX_ST_GPT11_SHIFT 13
> -#define OMAP24XX_ST_GPT11_MASK (1 << 13)
> -#define OMAP24XX_ST_GPT10_SHIFT 12
> -#define OMAP24XX_ST_GPT10_MASK (1 << 12)
> -#define OMAP24XX_ST_GPT9_SHIFT 11
> -#define OMAP24XX_ST_GPT9_MASK (1 << 11)
> -#define OMAP24XX_ST_GPT8_SHIFT 10
> -#define OMAP24XX_ST_GPT8_MASK (1 << 10)
> -#define OMAP24XX_ST_GPT7_SHIFT 9
> -#define OMAP24XX_ST_GPT7_MASK (1 << 9)
> -#define OMAP24XX_ST_GPT6_SHIFT 8
> -#define OMAP24XX_ST_GPT6_MASK (1 << 8)
> -#define OMAP24XX_ST_GPT5_SHIFT 7
> -#define OMAP24XX_ST_GPT5_MASK (1 << 7)
> -#define OMAP24XX_ST_GPT4_SHIFT 6
> -#define OMAP24XX_ST_GPT4_MASK (1 << 6)
> -#define OMAP24XX_ST_GPT3_SHIFT 5
> -#define OMAP24XX_ST_GPT3_MASK (1 << 5)
> -#define OMAP24XX_ST_GPT2_SHIFT 4
> -#define OMAP24XX_ST_GPT2_MASK (1 << 4)
> -#define OMAP2420_ST_VLYNQ_SHIFT 3
> -#define OMAP2420_ST_VLYNQ_MASK (1 << 3)
> -
> -/* CM_IDLEST2_CORE, PM_WKST2_CORE shared bits */
> -#define OMAP2430_ST_MDM_INTC_SHIFT 11
> -#define OMAP2430_ST_MDM_INTC_MASK (1 << 11)
> -#define OMAP2430_ST_GPIO5_SHIFT 10
> -#define OMAP2430_ST_GPIO5_MASK (1 << 10)
> -#define OMAP2430_ST_MCSPI3_SHIFT 9
> -#define OMAP2430_ST_MCSPI3_MASK (1 << 9)
> -#define OMAP2430_ST_MMCHS2_SHIFT 8
> -#define OMAP2430_ST_MMCHS2_MASK (1 << 8)
> -#define OMAP2430_ST_MMCHS1_SHIFT 7
> -#define OMAP2430_ST_MMCHS1_MASK (1 << 7)
> -#define OMAP2430_ST_USBHS_SHIFT 6
> -#define OMAP2430_ST_USBHS_MASK (1 << 6)
> -#define OMAP24XX_ST_UART3_SHIFT 2
> -#define OMAP24XX_ST_UART3_MASK (1 << 2)
> -#define OMAP24XX_ST_USB_SHIFT 0
> -#define OMAP24XX_ST_USB_MASK (1 << 0)
> -
> -/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
> -#define OMAP24XX_EN_GPIOS_SHIFT 2
> -#define OMAP24XX_EN_GPIOS_MASK (1 << 2)
> -#define OMAP24XX_EN_GPT1_SHIFT 0
> -#define OMAP24XX_EN_GPT1_MASK (1 << 0)
> -
> -/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
> -#define OMAP24XX_ST_GPIOS_SHIFT 2
> -#define OMAP24XX_ST_GPIOS_MASK (1 << 2)
> -#define OMAP24XX_ST_32KSYNC_SHIFT 1
> -#define OMAP24XX_ST_32KSYNC_MASK (1 << 1)
> -#define OMAP24XX_ST_GPT1_SHIFT 0
> -#define OMAP24XX_ST_GPT1_MASK (1 << 0)
> -
> -/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
> -#define OMAP2430_ST_MDM_SHIFT 0
> -#define OMAP2430_ST_MDM_MASK (1 << 0)
> -
> -
> /* 3430 register bits shared between CM & PRM registers */
>
> /* CM_REVISION, PRM_REVISION shared bits */
> diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h
> deleted file mode 100644
> index ff83801f6439..000000000000
> --- a/arch/arm/mach-omap2/prm-regbits-24xx.h
> +++ /dev/null
> @@ -1,39 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_24XX_H
> -#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_24XX_H
> -
> -/*
> - * OMAP24XX Power/Reset Management register bits
> - *
> - * Copyright (C) 2007 Texas Instruments, Inc.
> - * Copyright (C) 2007 Nokia Corporation
> - *
> - * Written by Paul Walmsley
> - */
> -
> -#include "prm2xxx.h"
> -
> -#define OMAP24XX_EN_CORE_SHIFT 0
> -#define OMAP24XX_FORCESTATE_MASK (1 << 18)
> -#define OMAP24XX_AUTOIDLE_MASK (1 << 0)
> -#define OMAP24XX_AUTO_EXTVOLT_MASK (1 << 15)
> -#define OMAP24XX_SETOFF_LEVEL_SHIFT 12
> -#define OMAP24XX_MEMRETCTRL_MASK (1 << 8)
> -#define OMAP24XX_SETRET_LEVEL_SHIFT 6
> -#define OMAP24XX_VOLT_LEVEL_SHIFT 0
> -#define OMAP2420_CLKOUT2_EN_SHIFT 15
> -#define OMAP2420_CLKOUT2_DIV_SHIFT 11
> -#define OMAP2420_CLKOUT2_DIV_WIDTH 3
> -#define OMAP2420_CLKOUT2_SOURCE_MASK (0x3 << 8)
> -#define OMAP24XX_CLKOUT_EN_SHIFT 7
> -#define OMAP24XX_CLKOUT_DIV_SHIFT 3
> -#define OMAP24XX_CLKOUT_DIV_WIDTH 3
> -#define OMAP24XX_CLKOUT_SOURCE_MASK (0x3 << 0)
> -#define OMAP24XX_EMULATION_EN_SHIFT 0
> -#define OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT 5
> -#define OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT 2
> -#define OMAP24XX_EXTWMPU_RST_SHIFT 6
> -#define OMAP24XX_SECU_WD_RST_SHIFT 5
> -#define OMAP24XX_MPU_WD_RST_SHIFT 4
> -#define OMAP24XX_SECU_VIOL_RST_SHIFT 3
> -#endif
> diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
> deleted file mode 100644
> index 35a58f54b528..000000000000
> --- a/arch/arm/mach-omap2/prm2xxx.c
> +++ /dev/null
> @@ -1,229 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * OMAP2xxx PRM module functions
> - *
> - * Copyright (C) 2010-2012 Texas Instruments, Inc.
> - * Copyright (C) 2010 Nokia Corporation
> - * Benoît Cousson
> - * Paul Walmsley
> - * Rajendra Nayak <rnayak@ti.com>
> - */
> -
> -#include <linux/kernel.h>
> -#include <linux/errno.h>
> -#include <linux/err.h>
> -#include <linux/io.h>
> -#include <linux/irq.h>
> -
> -#include "powerdomain.h"
> -#include "clockdomain.h"
> -#include "prm2xxx.h"
> -#include "cm2xxx_3xxx.h"
> -#include "prm-regbits-24xx.h"
> -
> -/*
> - * OMAP24xx PM_PWSTCTRL_*.POWERSTATE and PM_PWSTST_*.LASTSTATEENTERED bits -
> - * these are reversed from the bits used on OMAP3+
> - */
> -#define OMAP24XX_PWRDM_POWER_ON 0x0
> -#define OMAP24XX_PWRDM_POWER_RET 0x1
> -#define OMAP24XX_PWRDM_POWER_OFF 0x3
> -
> -/*
> - * omap2xxx_prm_reset_src_map - map from bits in the PRM_RSTST_WKUP
> - * hardware register (which are specific to the OMAP2xxx SoCs) to
> - * reset source ID bit shifts (which is an OMAP SoC-independent
> - * enumeration)
> - */
> -static struct prm_reset_src_map omap2xxx_prm_reset_src_map[] = {
> - { OMAP_GLOBALCOLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
> - { OMAP_GLOBALWARM_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
> - { OMAP24XX_SECU_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
> - { OMAP24XX_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
> - { OMAP24XX_SECU_WD_RST_SHIFT, OMAP_SECU_WD_RST_SRC_ID_SHIFT },
> - { OMAP24XX_EXTWMPU_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
> - { -1, -1 },
> -};
> -
> -/**
> - * omap2xxx_prm_read_reset_sources - return the last SoC reset source
> - *
> - * Return a u32 representing the last reset sources of the SoC. The
> - * returned reset source bits are standardized across OMAP SoCs.
> - */
> -static u32 omap2xxx_prm_read_reset_sources(void)
> -{
> - struct prm_reset_src_map *p;
> - u32 r = 0;
> - u32 v;
> -
> - v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST);
> -
> - p = omap2xxx_prm_reset_src_map;
> - while (p->reg_shift >= 0 && p->std_shift >= 0) {
> - if (v & (1 << p->reg_shift))
> - r |= 1 << p->std_shift;
> - p++;
> - }
> -
> - return r;
> -}
> -
> -/**
> - * omap2xxx_pwrst_to_common_pwrst - convert OMAP2xxx pwrst to common pwrst
> - * @omap2xxx_pwrst: OMAP2xxx hardware power state to convert
> - *
> - * Return the common power state bits corresponding to the OMAP2xxx
> - * hardware power state bits @omap2xxx_pwrst, or -EINVAL upon error.
> - */
> -static int omap2xxx_pwrst_to_common_pwrst(u8 omap2xxx_pwrst)
> -{
> - u8 pwrst;
> -
> - switch (omap2xxx_pwrst) {
> - case OMAP24XX_PWRDM_POWER_OFF:
> - pwrst = PWRDM_POWER_OFF;
> - break;
> - case OMAP24XX_PWRDM_POWER_RET:
> - pwrst = PWRDM_POWER_RET;
> - break;
> - case OMAP24XX_PWRDM_POWER_ON:
> - pwrst = PWRDM_POWER_ON;
> - break;
> - default:
> - return -EINVAL;
> - }
> -
> - return pwrst;
> -}
> -
> -/**
> - * omap2xxx_prm_dpll_reset - use DPLL reset to reboot the OMAP SoC
> - *
> - * Set the DPLL reset bit, which should reboot the SoC. This is the
> - * recommended way to restart the SoC. No return value.
> - */
> -static void omap2xxx_prm_dpll_reset(void)
> -{
> - omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, WKUP_MOD,
> - OMAP2_RM_RSTCTRL);
> - /* OCP barrier */
> - omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTCTRL);
> -}
> -
> -/**
> - * omap2xxx_prm_clear_mod_irqs - clear wakeup status bits for a module
> - * @module: PRM module to clear wakeups from
> - * @regs: register offset to clear
> - * @wkst_mask: wakeup status mask to clear
> - *
> - * Clears wakeup status bits for a given module, so that the device can
> - * re-enter idle.
> - */
> -static int omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
> -{
> - u32 wkst;
> -
> - wkst = omap2_prm_read_mod_reg(module, regs);
> - wkst &= wkst_mask;
> - omap2_prm_write_mod_reg(wkst, module, regs);
> - return 0;
> -}
> -
> -int omap2xxx_clkdm_sleep(struct clockdomain *clkdm)
> -{
> - omap2_prm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
> - clkdm->pwrdm.ptr->prcm_offs,
> - OMAP2_PM_PWSTCTRL);
> - return 0;
> -}
> -
> -int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm)
> -{
> - omap2_prm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
> - clkdm->pwrdm.ptr->prcm_offs,
> - OMAP2_PM_PWSTCTRL);
> - return 0;
> -}
> -
> -static int omap2xxx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
> -{
> - u8 omap24xx_pwrst;
> -
> - switch (pwrst) {
> - case PWRDM_POWER_OFF:
> - omap24xx_pwrst = OMAP24XX_PWRDM_POWER_OFF;
> - break;
> - case PWRDM_POWER_RET:
> - omap24xx_pwrst = OMAP24XX_PWRDM_POWER_RET;
> - break;
> - case PWRDM_POWER_ON:
> - omap24xx_pwrst = OMAP24XX_PWRDM_POWER_ON;
> - break;
> - default:
> - return -EINVAL;
> - }
> -
> - omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
> - (omap24xx_pwrst << OMAP_POWERSTATE_SHIFT),
> - pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
> - return 0;
> -}
> -
> -static int omap2xxx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
> -{
> - u8 omap2xxx_pwrst;
> -
> - omap2xxx_pwrst = omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
> - OMAP2_PM_PWSTCTRL,
> - OMAP_POWERSTATE_MASK);
> -
> - return omap2xxx_pwrst_to_common_pwrst(omap2xxx_pwrst);
> -}
> -
> -static int omap2xxx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
> -{
> - u8 omap2xxx_pwrst;
> -
> - omap2xxx_pwrst = omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
> - OMAP2_PM_PWSTST,
> - OMAP_POWERSTATEST_MASK);
> -
> - return omap2xxx_pwrst_to_common_pwrst(omap2xxx_pwrst);
> -}
> -
> -struct pwrdm_ops omap2_pwrdm_operations = {
> - .pwrdm_set_next_pwrst = omap2xxx_pwrdm_set_next_pwrst,
> - .pwrdm_read_next_pwrst = omap2xxx_pwrdm_read_next_pwrst,
> - .pwrdm_read_pwrst = omap2xxx_pwrdm_read_pwrst,
> - .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
> - .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
> - .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
> - .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
> - .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
> - .pwrdm_wait_transition = omap2_pwrdm_wait_transition,
> -};
> -
> -/*
> - *
> - */
> -
> -static struct prm_ll_data omap2xxx_prm_ll_data = {
> - .read_reset_sources = &omap2xxx_prm_read_reset_sources,
> - .assert_hardreset = &omap2_prm_assert_hardreset,
> - .deassert_hardreset = &omap2_prm_deassert_hardreset,
> - .is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
> - .reset_system = &omap2xxx_prm_dpll_reset,
> - .clear_mod_irqs = &omap2xxx_prm_clear_mod_irqs,
> -};
> -
> -int __init omap2xxx_prm_init(const struct omap_prcm_init_data *data)
> -{
> - return prm_register(&omap2xxx_prm_ll_data);
> -}
> -
> -static void __exit omap2xxx_prm_exit(void)
> -{
> - prm_unregister(&omap2xxx_prm_ll_data);
> -}
> -__exitcall(omap2xxx_prm_exit);
> diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h
> deleted file mode 100644
> index 659b917348f8..000000000000
> --- a/arch/arm/mach-omap2/prm2xxx.h
> +++ /dev/null
> @@ -1,128 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * OMAP2xxx Power/Reset Management (PRM) register definitions
> - *
> - * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
> - * Copyright (C) 2008-2010 Nokia Corporation
> - * Paul Walmsley
> - *
> - * The PRM hardware modules on the OMAP2/3 are quite similar to each
> - * other. The PRM on OMAP4 has a new register layout, and is handled
> - * in a separate file.
> - */
> -#ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
> -#define __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
> -
> -#include "prcm-common.h"
> -#include "prm.h"
> -#include "prm2xxx_3xxx.h"
> -
> -#define OMAP2420_PRM_REGADDR(module, reg) \
> - OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
> -#define OMAP2430_PRM_REGADDR(module, reg) \
> - OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
> -
> -/*
> - * OMAP2-specific global PRM registers
> - * Use {read,write}l_relaxed() with these registers.
> - *
> - * With a few exceptions, these are the register names beginning with
> - * PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE
> - * bits.)
> - *
> - */
> -
> -#define OMAP2_PRCM_REVISION_OFFSET 0x0000
> -#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
> -#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
> -#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
> -
> -#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
> -#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
> -#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
> -#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
> -
> -#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
> -#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
> -#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
> -#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
> -#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
> -#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
> -#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
> -#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
> -#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
> -#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
> -#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
> -#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
> -#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
> -#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
> -#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
> -#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
> -#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
> -#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
> -#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
> -#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
> -
> -#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
> -#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
> -
> -#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
> -#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
> -
> -#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
> -#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
> -#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
> -#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
> -#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
> -#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
> -#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
> -#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
> -#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
> -#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
> -
> -/*
> - * Module specific PRM register offsets from PRM_BASE + domain offset
> - *
> - * Use prm_{read,write}_mod_reg() with these registers.
> - *
> - * With a few exceptions, these are the register names beginning with
> - * {PM,RM}_* on both OMAP2/3 SoC families.. (The exceptions are the
> - * IRQSTATUS and IRQENABLE bits.)
> - */
> -
> -/* Register offsets appearing on both OMAP2 and OMAP3 */
> -
> -#define OMAP2_RM_RSTCTRL 0x0050
> -#define OMAP2_RM_RSTTIME 0x0054
> -#define OMAP2_RM_RSTST 0x0058
> -#define OMAP2_PM_PWSTCTRL 0x00e0
> -#define OMAP2_PM_PWSTST 0x00e4
> -
> -#define PM_WKEN 0x00a0
> -#define PM_WKEN1 PM_WKEN
> -#define PM_WKST 0x00b0
> -#define PM_WKST1 PM_WKST
> -#define PM_WKDEP 0x00c8
> -#define PM_EVGENCTRL 0x00d4
> -#define PM_EVGENONTIM 0x00d8
> -#define PM_EVGENOFFTIM 0x00dc
> -
> -/* OMAP2xxx specific register offsets */
> -#define OMAP24XX_PM_WKEN2 0x00a4
> -#define OMAP24XX_PM_WKST2 0x00b4
> -
> -#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
> -#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
> -#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
> -#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
> -
> -#ifndef __ASSEMBLER__
> -/* Function prototypes */
> -extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
> -extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
> -
> -int __init omap2xxx_prm_init(const struct omap_prcm_init_data *data);
> -
> -#endif
> -
> -#endif
> diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
> index d983efac6f4f..afaba7153ece 100644
> --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
> +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
> @@ -15,7 +15,6 @@
>
> #include "powerdomain.h"
> #include "prm2xxx_3xxx.h"
> -#include "prm-regbits-24xx.h"
> #include "clockdomain.h"
>
> /**
> diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
> index ee4588acda50..3546e7292bfb 100644
> --- a/arch/arm/mach-omap2/prm_common.c
> +++ b/arch/arm/mach-omap2/prm_common.c
> @@ -26,7 +26,6 @@
>
> #include "soc.h"
> #include "prm2xxx_3xxx.h"
> -#include "prm2xxx.h"
> #include "prm3xxx.h"
> #include "prm33xx.h"
> #include "prm44xx.h"
> @@ -582,13 +581,6 @@ int prm_unregister(struct prm_ll_data *pld)
> return 0;
> }
>
> -#ifdef CONFIG_ARCH_OMAP2
> -static struct omap_prcm_init_data omap2_prm_data __initdata = {
> - .index = TI_CLKM_PRM,
> - .init = omap2xxx_prm_init,
> -};
> -#endif
> -
> #ifdef CONFIG_ARCH_OMAP3
> static struct omap_prcm_init_data omap3_prm_data __initdata = {
> .index = TI_CLKM_PRM,
> @@ -670,9 +662,6 @@ static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
> { .compatible = "ti,dm814-pllss", .data = &dm814_pllss_data },
> { .compatible = "ti,dm816-prcm", .data = &am3_prm_data },
> #endif
> -#ifdef CONFIG_ARCH_OMAP2
> - { .compatible = "ti,omap2-prcm", .data = &omap2_prm_data },
> -#endif
> #ifdef CONFIG_ARCH_OMAP3
> { .compatible = "ti,omap3-prm", .data = &omap3_prm_data },
> #endif
> diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
> index 45b35422b587..c34fba4d2f1a 100644
> --- a/arch/arm/mach-omap2/sdrc.h
> +++ b/arch/arm/mach-omap2/sdrc.h
> @@ -90,17 +90,7 @@ struct memory_timings {
> u32 base_cs; /* base chip select to use for calculations */
> };
>
> -extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
> -
> -u32 omap2xxx_sdrc_dll_is_unlocked(void);
> -u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
> -
> -
> #else
> -#define OMAP242X_SDRC_REGADDR(reg) \
> - OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
> -#define OMAP243X_SDRC_REGADDR(reg) \
> - OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
> #define OMAP34XX_SDRC_REGADDR(reg) \
> OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
>
> @@ -184,17 +174,6 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
> #define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */
>
>
> -/*
> - * SMS register access
> - */
> -
> -#define OMAP242X_SMS_REGADDR(reg) \
> - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
> -#define OMAP243X_SMS_REGADDR(reg) \
> - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
> -#define OMAP343X_SMS_REGADDR(reg) \
> - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
> -
> /* SMS register offsets - read/write with sms_{read,write}_reg() */
>
> #define SMS_SYSCONFIG 0x010
> diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
> deleted file mode 100644
> index 5a275b4fd404..000000000000
> --- a/arch/arm/mach-omap2/sdrc2xxx.c
> +++ /dev/null
> @@ -1,164 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * SDRAM timing related functions for OMAP2xxx
> - *
> - * Copyright (C) 2005, 2008 Texas Instruments Inc.
> - * Copyright (C) 2005, 2008 Nokia Corporation
> - *
> - * Tony Lindgren <tony@atomide.com>
> - * Paul Walmsley
> - * Richard Woodruff <r-woodruff2@ti.com>
> - */
> -
> -#include <linux/module.h>
> -#include <linux/kernel.h>
> -#include <linux/device.h>
> -#include <linux/list.h>
> -#include <linux/errno.h>
> -#include <linux/delay.h>
> -#include <linux/clk.h>
> -#include <linux/io.h>
> -
> -#include "soc.h"
> -#include "iomap.h"
> -#include "common.h"
> -#include "prm2xxx.h"
> -#include "clock.h"
> -#include "sdrc.h"
> -#include "sram.h"
> -
> -/* Memory timing, DLL mode flags */
> -#define M_DDR 1
> -#define M_LOCK_CTRL (1 << 2)
> -#define M_UNLOCK 0
> -#define M_LOCK 1
> -
> -
> -static struct memory_timings mem_timings;
> -static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2;
> -
> -static u32 omap2xxx_sdrc_get_slow_dll_ctrl(void)
> -{
> - return mem_timings.slow_dll_ctrl;
> -}
> -
> -static u32 omap2xxx_sdrc_get_fast_dll_ctrl(void)
> -{
> - return mem_timings.fast_dll_ctrl;
> -}
> -
> -static u32 omap2xxx_sdrc_get_type(void)
> -{
> - return mem_timings.m_type;
> -}
> -
> -/*
> - * Check the DLL lock state, and return tue if running in unlock mode.
> - * This is needed to compensate for the shifted DLL value in unlock mode.
> - */
> -u32 omap2xxx_sdrc_dll_is_unlocked(void)
> -{
> - /* dlla and dllb are a set */
> - u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL);
> -
> - if ((dll_state & (1 << 2)) == (1 << 2))
> - return 1;
> - else
> - return 0;
> -}
> -
> -/*
> - * 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC.
> - * Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or
> - * CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2)
> - *
> - * Used by the clock framework during CORE DPLL changes
> - */
> -u32 omap2xxx_sdrc_reprogram(u32 level, u32 force)
> -{
> - u32 dll_ctrl, m_type;
> - u32 prev = curr_perf_level;
> - unsigned long flags;
> -
> - if ((curr_perf_level == level) && !force)
> - return prev;
> -
> - if (level == CORE_CLK_SRC_DPLL)
> - dll_ctrl = omap2xxx_sdrc_get_slow_dll_ctrl();
> - else if (level == CORE_CLK_SRC_DPLL_X2)
> - dll_ctrl = omap2xxx_sdrc_get_fast_dll_ctrl();
> - else
> - return prev;
> -
> - m_type = omap2xxx_sdrc_get_type();
> -
> - local_irq_save(flags);
> - /*
> - * XXX These calls should be abstracted out through a
> - * prm2xxx.c function
> - */
> - if (cpu_is_omap2420())
> - writel_relaxed(0xffff, OMAP2420_PRCM_VOLTSETUP);
> - else
> - writel_relaxed(0xffff, OMAP2430_PRCM_VOLTSETUP);
> - omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
> - curr_perf_level = level;
> - local_irq_restore(flags);
> -
> - return prev;
> -}
> -
> -/* Used by the clock framework during CORE DPLL changes */
> -void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode)
> -{
> - unsigned long dll_cnt;
> - u32 fast_dll = 0;
> -
> - /* DDR = 1, SDR = 0 */
> - mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1);
> -
> - /* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
> - * In the case of 2422, its ok to use CS1 instead of CS0.
> - */
> - if (cpu_is_omap2422())
> - mem_timings.base_cs = 1;
> - else
> - mem_timings.base_cs = 0;
> -
> - if (mem_timings.m_type != M_DDR)
> - return;
> -
> - /* With DDR we need to determine the low frequency DLL value */
> - if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL))
> - mem_timings.dll_mode = M_UNLOCK;
> - else
> - mem_timings.dll_mode = M_LOCK;
> -
> - if (mem_timings.base_cs == 0) {
> - fast_dll = sdrc_read_reg(SDRC_DLLA_CTRL);
> - dll_cnt = sdrc_read_reg(SDRC_DLLA_STATUS) & 0xff00;
> - } else {
> - fast_dll = sdrc_read_reg(SDRC_DLLB_CTRL);
> - dll_cnt = sdrc_read_reg(SDRC_DLLB_STATUS) & 0xff00;
> - }
> - if (force_lock_to_unlock_mode) {
> - fast_dll &= ~0xff00;
> - fast_dll |= dll_cnt; /* Current lock mode */
> - }
> - /* set fast timings with DLL filter disabled */
> - mem_timings.fast_dll_ctrl = (fast_dll | (3 << 8));
> -
> - /* No disruptions, DDR will be offline & C-ABI not followed */
> - omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl,
> - mem_timings.fast_dll_ctrl,
> - mem_timings.base_cs,
> - force_lock_to_unlock_mode);
> - mem_timings.slow_dll_ctrl &= 0xff00; /* Keep lock value */
> -
> - /* Turn status into unlock ctrl */
> - mem_timings.slow_dll_ctrl |=
> - ((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2));
> -
> - /* 90 degree phase for anything below 133MHz + disable DLL filter */
> - mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
> -}
> diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
> deleted file mode 100644
> index 84d8c43ad382..000000000000
> --- a/arch/arm/mach-omap2/sleep24xx.S
> +++ /dev/null
> @@ -1,91 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-or-later */
> -/*
> - * linux/arch/arm/mach-omap2/sleep.S
> - *
> - * (C) Copyright 2004
> - * Texas Instruments, <www.ti.com>
> - * Richard Woodruff <r-woodruff2@ti.com>
> - *
> - * (C) Copyright 2006 Nokia Corporation
> - * Fixed idle loop sleep
> - * Igor Stoppa <igor.stoppa@nokia.com>
> - */
> -
> -#include <linux/linkage.h>
> -#include <asm/assembler.h>
> -
> -#include "omap24xx.h"
> -#include "sdrc.h"
> -
> -/* First address of reserved address space? apparently valid for OMAP2 & 3 */
> -#define A_SDRC0_V (0xC0000000)
> -
> - .text
> -
> -/*
> - * omap24xx_cpu_suspend() - Forces OMAP into deep sleep state by completing
> - * SDRC shutdown then ARM shutdown. Upon wake MPU is back on so just restore
> - * SDRC.
> - *
> - * Input:
> - * R0 : DLL ctrl value pre-Sleep
> - * R1 : SDRC_DLLA_CTRL
> - * R2 : SDRC_POWER
> - *
> - * The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on
> - * when we get called, but the DLL probably isn't. We will wait a bit more in
> - * case the DPLL isn't quite there yet. The code will wait on DLL for DDR even
> - * if in unlocked mode.
> - *
> - * For less than 242x-ES2.2 upon wake from a sleep mode where the external
> - * oscillator was stopped, a timing bug exists where a non-stabilized 12MHz
> - * clock can pass into the PRCM can cause problems at DSP and IVA.
> - * To work around this the code will switch to the 32kHz source prior to sleep.
> - * Post sleep we will shift back to using the DPLL. Apparently,
> - * CM_IDLEST_CLKGEN does not reflect the full clock change so you need to wait
> - * 3x12MHz + 3x32kHz clocks for a full switch.
> - *
> - * The DLL load value is not kept in RETENTION or OFF. It needs to be restored
> - * at wake
> - */
> - .align 3
> -ENTRY(omap24xx_cpu_suspend)
> - stmfd sp!, {r0 - r12, lr} @ save registers on stack
> - mov r3, #0x0 @ clear for mcr call
> - mcr p15, 0, r3, c7, c10, 4 @ memory barrier, hope SDR/DDR finished
> - nop
> - nop
> - ldr r4, [r2] @ read SDRC_POWER
> - orr r4, r4, #0x40 @ enable self refresh on idle req
> - mov r5, #0x2000 @ set delay (DPLL relock + DLL relock)
> - str r4, [r2] @ make it so
> - nop
> - mcr p15, 0, r3, c7, c0, 4 @ wait for interrupt
> - nop
> -loop:
> - subs r5, r5, #0x1 @ awake, wait just a bit
> - bne loop
> -
> - /* The DPLL has to be on before we take the DDR out of self refresh */
> - bic r4, r4, #0x40 @ now clear self refresh bit.
> - str r4, [r2] @ write to SDRC_POWER
> - ldr r4, A_SDRC0 @ make a clock happen
> - ldr r4, [r4] @ read A_SDRC0
> - nop @ start auto refresh only after clk ok
> - movs r0, r0 @ see if DDR or SDR
> - strne r0, [r1] @ rewrite DLLA to force DLL reload
> - addne r1, r1, #0x8 @ move to DLLB
> - strne r0, [r1] @ rewrite DLLB to force DLL reload
> -
> - mov r5, #0x1000
> -loop2:
> - subs r5, r5, #0x1
> - bne loop2
> - /* resume*/
> - ldmfd sp!, {r0 - r12, pc} @ restore regs and return
> -
> -A_SDRC0:
> - .word A_SDRC0_V
> -
> -ENTRY(omap24xx_cpu_suspend_sz)
> - .word . - omap24xx_cpu_suspend
> diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
> index 9e3dbb743e5c..9c9f56ca9142 100644
> --- a/arch/arm/mach-omap2/soc.h
> +++ b/arch/arm/mach-omap2/soc.h
> @@ -12,7 +12,6 @@
> * Added DRA7xxx specific defines - Sricharan R<r.sricharan@ti.com>
> */
>
> -#include "omap24xx.h"
> #include "omap34xx.h"
> #include "omap44xx.h"
> #include "ti81xx.h"
> @@ -62,9 +61,6 @@ static inline int soc_is_omap(void)
> /*
> * Macros to group OMAP into cpu classes.
> * These can be used in most places.
> - * soc_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
> - * soc_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423
> - * soc_is_omap243x(): True for OMAP2430
> * soc_is_omap343x(): True for OMAP3430
> * soc_is_omap443x(): True for OMAP4430
> * soc_is_omap446x(): True for OMAP4460
> @@ -137,7 +133,6 @@ static inline int is_dra ##subclass ##_ ##package (void) \
> return (is_dra ##subclass () && GET_DRA_PACKAGE == id) ? 1 : 0; \
> }
>
> -IS_OMAP_CLASS(24xx, 0x24)
> IS_OMAP_CLASS(34xx, 0x34)
> IS_OMAP_CLASS(44xx, 0x44)
> IS_AM_CLASS(35xx, 0x35)
> @@ -148,8 +143,6 @@ IS_AM_CLASS(43xx, 0x43)
> IS_TI_CLASS(81xx, 0x81)
> IS_DRA_CLASS(7xx, 0x7)
>
> -IS_OMAP_SUBCLASS(242x, 0x242)
> -IS_OMAP_SUBCLASS(243x, 0x243)
> IS_OMAP_SUBCLASS(343x, 0x343)
> IS_OMAP_SUBCLASS(363x, 0x363)
> IS_OMAP_SUBCLASS(443x, 0x443)
> @@ -186,21 +179,6 @@ IS_DRA_SUBCLASS(72x, 0x72)
> #define soc_is_dra74x() 0
> #define soc_is_dra72x() 0
>
> -#if defined(CONFIG_ARCH_OMAP2)
> -# define soc_is_omap24xx() is_omap24xx()
> -#else
> -# define soc_is_omap24xx() 0
> -#endif
> -#if defined(CONFIG_SOC_OMAP2420)
> -# define soc_is_omap242x() is_omap242x()
> -#else
> -# define soc_is_omap242x() 0
> -#endif
> -#if defined(CONFIG_SOC_OMAP2430)
> -# define soc_is_omap243x() is_omap243x()
> -#else
> -# define soc_is_omap243x() 0
> -#endif
> #if defined(CONFIG_ARCH_OMAP3)
> # define soc_is_omap34xx() is_omap34xx()
> # define soc_is_omap343x() is_omap343x()
> @@ -212,10 +190,6 @@ IS_DRA_SUBCLASS(72x, 0x72)
> /*
> * Macros to detect individual cpu types.
> * These are only rarely needed.
> - * soc_is_omap2420(): True for OMAP2420
> - * soc_is_omap2422(): True for OMAP2422
> - * soc_is_omap2423(): True for OMAP2423
> - * soc_is_omap2430(): True for OMAP2430
> * soc_is_omap3430(): True for OMAP3430
> */
> #define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
> @@ -226,16 +200,8 @@ static inline int is_omap ##type (void) \
> return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
> }
>
> -IS_OMAP_TYPE(2420, 0x2420)
> -IS_OMAP_TYPE(2422, 0x2422)
> -IS_OMAP_TYPE(2423, 0x2423)
> -IS_OMAP_TYPE(2430, 0x2430)
> IS_OMAP_TYPE(3430, 0x3430)
>
> -#define soc_is_omap2420() 0
> -#define soc_is_omap2422() 0
> -#define soc_is_omap2423() 0
> -#define soc_is_omap2430() 0
> #define soc_is_omap3430() 0
> #define soc_is_omap3630() 0
> #define soc_is_omap5430() 0
> @@ -252,17 +218,6 @@ IS_OMAP_TYPE(3430, 0x3430)
> #define cpu_class_is_omap1() 0
> #define cpu_class_is_omap2() 1
>
> -#if defined(CONFIG_ARCH_OMAP2)
> -# undef soc_is_omap2420
> -# undef soc_is_omap2422
> -# undef soc_is_omap2423
> -# undef soc_is_omap2430
> -# define soc_is_omap2420() is_omap2420()
> -# define soc_is_omap2422() is_omap2422()
> -# define soc_is_omap2423() is_omap2423()
> -# define soc_is_omap2430() is_omap2430()
> -#endif
> -
> #if defined(CONFIG_ARCH_OMAP3)
> # undef soc_is_omap3430
> # undef soc_is_ti81xx
> @@ -326,13 +281,6 @@ IS_OMAP_TYPE(3430, 0x3430)
> #endif
>
> /* Various silicon revisions for omap2 */
> -#define OMAP242X_CLASS 0x24200024
> -#define OMAP2420_REV_ES1_0 OMAP242X_CLASS
> -#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8))
> -
> -#define OMAP243X_CLASS 0x24300024
> -#define OMAP2430_REV_ES1_0 OMAP243X_CLASS
> -
> #define OMAP343X_CLASS 0x34300034
> #define OMAP3430_REV_ES1_0 OMAP343X_CLASS
> #define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8))
> @@ -400,7 +348,6 @@ IS_OMAP_TYPE(3430, 0x3430)
> #define DRA722_REV_ES2_0 (DRA7XX_CLASS | (0x22 << 16) | (0x20 << 8))
> #define DRA722_REV_ES2_1 (DRA7XX_CLASS | (0x22 << 16) | (0x21 << 8))
>
> -void omap2xxx_check_revision(void);
> void omap3xxx_check_revision(void);
> void omap4xxx_check_revision(void);
> void omap5xxx_check_revision(void);
> @@ -484,12 +431,6 @@ level(__##fn);
> #define omap_late_initcall_sync(fn) omap_initcall(late_initcall_sync, fn)
>
> /* Legacy defines, these can be removed when users are removed */
> -#define cpu_is_omap2420() soc_is_omap2420()
> -#define cpu_is_omap2422() soc_is_omap2422()
> -#define cpu_is_omap242x() soc_is_omap242x()
> -#define cpu_is_omap2430() soc_is_omap2430()
> -#define cpu_is_omap243x() soc_is_omap243x()
> -#define cpu_is_omap24xx() soc_is_omap24xx()
> #define cpu_is_omap3430() soc_is_omap3430()
> #define cpu_is_omap343x() soc_is_omap343x()
> #define cpu_is_omap34xx() soc_is_omap34xx()
> diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c
> index 898b011ae8d9..8f980849f201 100644
> --- a/arch/arm/mach-omap2/sram.c
> +++ b/arch/arm/mach-omap2/sram.c
> @@ -28,15 +28,10 @@
> #include "sdrc.h"
> #include "sram.h"
>
> -#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
> #define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
>
> #define SRAM_BOOTLOADER_SZ 0x00
>
> -#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048)
> -#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050)
> -#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058)
> -
> #define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848)
> #define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850)
> #define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858)
> @@ -120,18 +115,11 @@ static int is_sram_locked(void)
> {
> if (omap_type() == OMAP2_DEVICE_TYPE_GP) {
> /* RAMFW: R/W access to all initiators for all qualifier sets */
> - if (cpu_is_omap242x()) {
> - writel_relaxed(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
> - writel_relaxed(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
> - writel_relaxed(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
> - }
> - if (cpu_is_omap34xx()) {
> - writel_relaxed(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
> - writel_relaxed(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
> - writel_relaxed(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
> - writel_relaxed(0x0, OMAP34XX_VA_ADDR_MATCH2);
> - writel_relaxed(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
> - }
> + writel_relaxed(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
> + writel_relaxed(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
> + writel_relaxed(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
> + writel_relaxed(0x0, OMAP34XX_VA_ADDR_MATCH2);
> + writel_relaxed(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
> return 0;
> } else
> return 1; /* assume locked with no PPA or security driver */
> @@ -147,30 +135,17 @@ static void __init omap_detect_sram(void)
> {
> omap_sram_skip = SRAM_BOOTLOADER_SZ;
> if (is_sram_locked()) {
> - if (cpu_is_omap34xx()) {
> - omap_sram_start = OMAP3_SRAM_PUB_PA;
> - if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
> - (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
> - omap_sram_size = 0x7000; /* 28K */
> - omap_sram_skip += SZ_16K;
> - } else {
> - omap_sram_size = 0x8000; /* 32K */
> - }
> + omap_sram_start = OMAP3_SRAM_PUB_PA;
> + if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
> + (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
> + omap_sram_size = 0x7000; /* 28K */
> + omap_sram_skip += SZ_16K;
> } else {
> - omap_sram_start = OMAP2_SRAM_PUB_PA;
> - omap_sram_size = 0x800; /* 2K */
> + omap_sram_size = 0x8000; /* 32K */
> }
> } else {
> - if (cpu_is_omap34xx()) {
> - omap_sram_start = OMAP3_SRAM_PA;
> - omap_sram_size = 0x10000; /* 64K */
> - } else {
> - omap_sram_start = OMAP2_SRAM_PA;
> - if (cpu_is_omap242x())
> - omap_sram_size = 0xa0000; /* 640K */
> - else if (cpu_is_omap243x())
> - omap_sram_size = 0x10000; /* 64K */
> - }
> + omap_sram_start = OMAP3_SRAM_PA;
> + omap_sram_size = 0x10000; /* 64K */
> }
> }
>
> @@ -181,24 +156,20 @@ static void __init omap2_map_sram(void)
> {
> unsigned long base;
> int pages;
> - int cached = 1;
> -
> - if (cpu_is_omap34xx()) {
> - /*
> - * SRAM must be marked as non-cached on OMAP3 since the
> - * CORE DPLL M2 divider change code (in SRAM) runs with the
> - * SDRAM controller disabled, and if it is marked cached,
> - * the ARM may attempt to write cache lines back to SDRAM
> - * which will cause the system to hang.
> - */
> - cached = 0;
> - }
>
> if (omap_sram_size == 0)
> return;
>
> omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE);
> - omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, cached);
> + /*
> + * SRAM must be marked as non-cached on OMAP3 since the
> + * CORE DPLL M2 divider change code (in SRAM) runs with the
> + * SDRAM controller disabled, and if it is marked cached,
> + * the ARM may attempt to write cache lines back to SDRAM
> + * which will cause the system to hang.
> + */
> +
> + omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, 0);
> if (!omap_sram_base) {
> pr_err("SRAM: Could not map\n");
> return;
> @@ -219,78 +190,6 @@ static void __init omap2_map_sram(void)
> set_memory_rox(base, pages);
> }
>
> -static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
> - u32 base_cs, u32 force_unlock);
> -
> -void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
> - u32 base_cs, u32 force_unlock)
> -{
> - BUG_ON(!_omap2_sram_ddr_init);
> - _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
> - base_cs, force_unlock);
> -}
> -
> -static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
> - u32 mem_type);
> -
> -void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
> -{
> - BUG_ON(!_omap2_sram_reprogram_sdrc);
> - _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
> -}
> -
> -static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
> -
> -u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
> -{
> - BUG_ON(!_omap2_set_prcm);
> - return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
> -}
> -
> -#ifdef CONFIG_SOC_OMAP2420
> -static int __init omap242x_sram_init(void)
> -{
> - _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
> - omap242x_sram_ddr_init_sz);
> -
> - _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
> - omap242x_sram_reprogram_sdrc_sz);
> -
> - _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
> - omap242x_sram_set_prcm_sz);
> -
> - return 0;
> -}
> -#else
> -static inline int omap242x_sram_init(void)
> -{
> - return 0;
> -}
> -#endif
> -
> -#ifdef CONFIG_SOC_OMAP2430
> -static int __init omap243x_sram_init(void)
> -{
> - _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
> - omap243x_sram_ddr_init_sz);
> -
> - _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
> - omap243x_sram_reprogram_sdrc_sz);
> -
> - _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
> - omap243x_sram_set_prcm_sz);
> -
> - return 0;
> -}
> -#else
> -static inline int omap243x_sram_init(void)
> -{
> - return 0;
> -}
> -#endif
> -
> -#ifdef CONFIG_ARCH_OMAP3
> -
> void omap3_sram_restore_context(void)
> {
> omap_sram_reset();
> @@ -303,24 +202,12 @@ static inline int omap34xx_sram_init(void)
> omap3_sram_restore_context();
> return 0;
> }
> -#else
> -static inline int omap34xx_sram_init(void)
> -{
> - return 0;
> -}
> -#endif /* CONFIG_ARCH_OMAP3 */
>
> int __init omap_sram_init(void)
> {
> omap_detect_sram();
> omap2_map_sram();
> -
> - if (cpu_is_omap242x())
> - omap242x_sram_init();
> - else if (cpu_is_omap2430())
> - omap243x_sram_init();
> - else if (cpu_is_omap34xx())
> - omap34xx_sram_init();
> + omap34xx_sram_init();
>
> return 0;
> }
> diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h
> index 030cabc39821..2db2c4598cdb 100644
> --- a/arch/arm/mach-omap2/sram.h
> +++ b/arch/arm/mach-omap2/sram.h
> @@ -5,43 +5,12 @@
>
> #ifndef __ASSEMBLY__
>
> -extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
> - u32 base_cs, u32 force_unlock);
> -extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
> - u32 mem_type);
> -extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
> -
> extern void omap3_sram_restore_context(void);
>
> extern int __init omap_sram_init(void);
>
> extern void *omap_sram_push(void *funcp, unsigned long size);
>
> -extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
> - u32 base_cs, u32 force_unlock);
> -extern unsigned long omap242x_sram_ddr_init_sz;
> -
> -extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
> - int bypass);
> -extern unsigned long omap242x_sram_set_prcm_sz;
> -
> -extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
> - u32 mem_type);
> -extern unsigned long omap242x_sram_reprogram_sdrc_sz;
> -
> -
> -extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
> - u32 base_cs, u32 force_unlock);
> -extern unsigned long omap243x_sram_ddr_init_sz;
> -
> -extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
> - int bypass);
> -extern unsigned long omap243x_sram_set_prcm_sz;
> -
> -extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
> - u32 mem_type);
> -extern unsigned long omap243x_sram_reprogram_sdrc_sz;
> -
> #ifdef CONFIG_PM
> extern void omap_push_sram_idle(void);
> #else
> @@ -54,5 +23,4 @@ static inline void omap_push_sram_idle(void) {}
> * OMAP2+: define the SRAM PA addresses.
> * Used by the SRAM management code and the idle sleep code.
> */
> -#define OMAP2_SRAM_PA 0x40200000
> #define OMAP3_SRAM_PA 0x40200000
> diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
> deleted file mode 100644
> index 92ef21ac2ac1..000000000000
> --- a/arch/arm/mach-omap2/sram242x.S
> +++ /dev/null
> @@ -1,317 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-or-later */
> -/*
> - * linux/arch/arm/mach-omap2/sram242x.S
> - *
> - * Omap2 specific functions that need to be run in internal SRAM
> - *
> - * (C) Copyright 2004
> - * Texas Instruments, <www.ti.com>
> - * Richard Woodruff <r-woodruff2@ti.com>
> - *
> - * Richard Woodruff notes that any changes to this code must be carefully
> - * audited and tested to ensure that they don't cause a TLB miss while
> - * the SDRAM is inaccessible. Such a situation will crash the system
> - * since it will cause the ARM MMU to attempt to walk the page tables.
> - * These crashes may be intermittent.
> - */
> -#include <linux/linkage.h>
> -
> -#include <asm/assembler.h>
> -
> -#include "soc.h"
> -#include "iomap.h"
> -#include "prm2xxx.h"
> -#include "cm2xxx.h"
> -#include "sdrc.h"
> -
> - .text
> -
> - .align 3
> -ENTRY(omap242x_sram_ddr_init)
> - stmfd sp!, {r0 - r12, lr} @ save registers on stack
> -
> - mov r12, r2 @ capture CS1 vs CS0
> - mov r8, r3 @ capture force parameter
> -
> - /* frequency shift down */
> - ldr r2, omap242x_sdi_cm_clksel2_pll @ get address of dpllout reg
> - mov r3, #0x1 @ value for 1x operation
> - str r3, [r2] @ go to L1-freq operation
> -
> - /* voltage shift down */
> - mov r9, #0x1 @ set up for L1 voltage call
> - bl voltage_shift @ go drop voltage
> -
> - /* dll lock mode */
> - ldr r11, omap242x_sdi_sdrc_dlla_ctrl @ addr of dlla ctrl
> - ldr r10, [r11] @ get current val
> - cmp r12, #0x1 @ cs1 base (2422 es2.05/1)
> - addeq r11, r11, #0x8 @ if cs1 base, move to DLLB
> - mvn r9, #0x4 @ mask to get clear bit2
> - and r10, r10, r9 @ clear bit2 for lock mode.
> - orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos)
> - orr r10, r10, #0x2 @ 90 degree phase for all below 133MHz
> - str r10, [r11] @ commit to DLLA_CTRL
> - bl i_dll_wait @ wait for dll to lock
> -
> - /* get dll value */
> - add r11, r11, #0x4 @ get addr of status reg
> - ldr r10, [r11] @ get locked value
> -
> - /* voltage shift up */
> - mov r9, #0x0 @ shift back to L0-voltage
> - bl voltage_shift @ go raise voltage
> -
> - /* frequency shift up */
> - mov r3, #0x2 @ value for 2x operation
> - str r3, [r2] @ go to L0-freq operation
> -
> - /* reset entry mode for dllctrl */
> - sub r11, r11, #0x4 @ move from status to ctrl
> - cmp r12, #0x1 @ normalize if cs1 based
> - subeq r11, r11, #0x8 @ possibly back to DLLA
> - cmp r8, #0x1 @ if forced unlock exit
> - orreq r1, r1, #0x4 @ make sure exit with unlocked value
> - str r1, [r11] @ restore DLLA_CTRL high value
> - add r11, r11, #0x8 @ move to DLLB_CTRL addr
> - str r1, [r11] @ set value DLLB_CTRL
> - bl i_dll_wait @ wait for possible lock
> -
> - /* set up for return, DDR should be good */
> - str r10, [r0] @ write dll_status and return counter
> - ldmfd sp!, {r0 - r12, pc} @ restore regs and return
> -
> - /* ensure the DLL has relocked */
> -i_dll_wait:
> - mov r4, #0x800 @ delay DLL relock, min 0x400 L3 clocks
> -i_dll_delay:
> - subs r4, r4, #0x1
> - bne i_dll_delay
> - ret lr
> -
> - /*
> - * shift up or down voltage, use R9 as input to tell level.
> - * wait for it to finish, use 32k sync counter, 1tick=31uS.
> - */
> -voltage_shift:
> - ldr r4, omap242x_sdi_prcm_voltctrl @ get addr of volt ctrl.
> - ldr r5, [r4] @ get value.
> - ldr r6, prcm_mask_val @ get value of mask
> - and r5, r5, r6 @ apply mask to clear bits
> - orr r5, r5, r9 @ bulld value for L0/L1-volt operation.
> - str r5, [r4] @ set up for change.
> - mov r3, #0x4000 @ get val for force
> - orr r5, r5, r3 @ build value for force
> - str r5, [r4] @ Force transition to L1
> -
> - ldr r3, omap242x_sdi_timer_32ksynct_cr @ get addr of counter
> - ldr r5, [r3] @ get value
> - add r5, r5, #0x3 @ give it at most 93uS
> -volt_delay:
> - ldr r7, [r3] @ get timer value
> - cmp r5, r7 @ time up?
> - bhi volt_delay @ not yet->branch
> - ret lr @ back to caller.
> -
> -omap242x_sdi_cm_clksel2_pll:
> - .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
> -omap242x_sdi_sdrc_dlla_ctrl:
> - .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
> -omap242x_sdi_prcm_voltctrl:
> - .word OMAP2420_PRCM_VOLTCTRL
> -prcm_mask_val:
> - .word 0xFFFF3FFC
> -omap242x_sdi_timer_32ksynct_cr:
> - .word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
> -ENTRY(omap242x_sram_ddr_init_sz)
> - .word . - omap242x_sram_ddr_init
> -
> -/*
> - * Reprograms memory timings.
> - * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
> - * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
> - */
> - .align 3
> -ENTRY(omap242x_sram_reprogram_sdrc)
> - stmfd sp!, {r0 - r10, lr} @ save registers on stack
> - mov r3, #0x0 @ clear for mrc call
> - mcr p15, 0, r3, c7, c10, 4 @ memory barrier, finish ARM SDR/DDR
> - nop
> - nop
> - ldr r6, omap242x_srs_sdrc_rfr_ctrl @ get addr of refresh reg
> - ldr r5, [r6] @ get value
> - mov r5, r5, lsr #8 @ isolate rfr field and drop burst
> -
> - cmp r0, #0x1 @ going to half speed?
> - movne r9, #0x0 @ if up set flag up for pre up, hi volt
> -
> - blne voltage_shift_c @ adjust voltage
> -
> - cmp r0, #0x1 @ going to half speed (post branch link)
> - moveq r5, r5, lsr #1 @ divide by 2 if to half
> - movne r5, r5, lsl #1 @ mult by 2 if to full
> - mov r5, r5, lsl #8 @ put rfr field back into place
> - add r5, r5, #0x1 @ turn on burst of 1
> - ldr r4, omap242x_srs_cm_clksel2_pll @ get address of out reg
> - ldr r3, [r4] @ get curr value
> - orr r3, r3, #0x3
> - bic r3, r3, #0x3 @ clear lower bits
> - orr r3, r3, r0 @ new state value
> - str r3, [r4] @ set new state (pll/x, x=1 or 2)
> - nop
> - nop
> -
> - moveq r9, #0x1 @ if speed down, post down, drop volt
> - bleq voltage_shift_c
> -
> - mcr p15, 0, r3, c7, c10, 4 @ memory barrier
> - str r5, [r6] @ set new RFR_1 value
> - add r6, r6, #0x30 @ get RFR_2 addr
> - str r5, [r6] @ set RFR_2
> - nop
> - cmp r2, #0x1 @ (SDR or DDR) do we need to adjust DLL
> - bne freq_out @ leave if SDR, no DLL function
> -
> - /* With DDR, we need to take care of the DLL for the frequency change */
> - ldr r2, omap242x_srs_sdrc_dlla_ctrl @ addr of dlla ctrl
> - str r1, [r2] @ write out new SDRC_DLLA_CTRL
> - add r2, r2, #0x8 @ addr to SDRC_DLLB_CTRL
> - str r1, [r2] @ commit to SDRC_DLLB_CTRL
> - mov r1, #0x2000 @ wait DLL relock, min 0x400 L3 clocks
> -dll_wait:
> - subs r1, r1, #0x1
> - bne dll_wait
> -freq_out:
> - ldmfd sp!, {r0 - r10, pc} @ restore regs and return
> -
> - /*
> - * shift up or down voltage, use R9 as input to tell level.
> - * wait for it to finish, use 32k sync counter, 1tick=31uS.
> - */
> -voltage_shift_c:
> - ldr r10, omap242x_srs_prcm_voltctrl @ get addr of volt ctrl
> - ldr r8, [r10] @ get value
> - ldr r7, ddr_prcm_mask_val @ get value of mask
> - and r8, r8, r7 @ apply mask to clear bits
> - orr r8, r8, r9 @ bulld value for L0/L1-volt operation.
> - str r8, [r10] @ set up for change.
> - mov r7, #0x4000 @ get val for force
> - orr r8, r8, r7 @ build value for force
> - str r8, [r10] @ Force transition to L1
> -
> - ldr r10, omap242x_srs_timer_32ksynct @ get addr of counter
> - ldr r8, [r10] @ get value
> - add r8, r8, #0x2 @ give it at most 62uS (min 31+)
> -volt_delay_c:
> - ldr r7, [r10] @ get timer value
> - cmp r8, r7 @ time up?
> - bhi volt_delay_c @ not yet->branch
> - ret lr @ back to caller
> -
> -omap242x_srs_cm_clksel2_pll:
> - .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
> -omap242x_srs_sdrc_dlla_ctrl:
> - .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
> -omap242x_srs_sdrc_rfr_ctrl:
> - .word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
> -omap242x_srs_prcm_voltctrl:
> - .word OMAP2420_PRCM_VOLTCTRL
> -ddr_prcm_mask_val:
> - .word 0xFFFF3FFC
> -omap242x_srs_timer_32ksynct:
> - .word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
> -
> -ENTRY(omap242x_sram_reprogram_sdrc_sz)
> - .word . - omap242x_sram_reprogram_sdrc
> -
> -/*
> - * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
> - */
> - .align 3
> -ENTRY(omap242x_sram_set_prcm)
> - stmfd sp!, {r0-r12, lr} @ regs to stack
> - adr r4, pbegin @ addr of preload start
> - adr r8, pend @ addr of preload end
> - mcrr p15, 1, r8, r4, c12 @ preload into icache
> -pbegin:
> - /* move into fast relock bypass */
> - ldr r8, omap242x_ssp_pll_ctl @ get addr
> - ldr r5, [r8] @ get val
> - mvn r6, #0x3 @ clear mask
> - and r5, r5, r6 @ clear field
> - orr r7, r5, #0x2 @ fast relock val
> - str r7, [r8] @ go to fast relock
> - ldr r4, omap242x_ssp_pll_stat @ addr of stat
> -block:
> - /* wait for bypass */
> - ldr r8, [r4] @ stat value
> - and r8, r8, #0x3 @ mask for stat
> - cmp r8, #0x1 @ there yet
> - bne block @ loop if not
> -
> - /* set new dpll dividers _after_ in bypass */
> - ldr r4, omap242x_ssp_pll_div @ get addr
> - str r0, [r4] @ set dpll ctrl val
> -
> - ldr r4, omap242x_ssp_set_config @ get addr
> - mov r8, #1 @ valid cfg msk
> - str r8, [r4] @ make dividers take
> -
> - mov r4, #100 @ dead spin a bit
> -wait_a_bit:
> - subs r4, r4, #1 @ dec loop
> - bne wait_a_bit @ delay done?
> -
> - /* check if staying in bypass */
> - cmp r2, #0x1 @ stay in bypass?
> - beq pend @ jump over dpll relock
> -
> - /* relock DPLL with new vals */
> - ldr r5, omap242x_ssp_pll_stat @ get addr
> - ldr r4, omap242x_ssp_pll_ctl @ get addr
> - orr r8, r7, #0x3 @ val for lock dpll
> - str r8, [r4] @ set val
> - mov r0, #1000 @ dead spin a bit
> -wait_more:
> - subs r0, r0, #1 @ dec loop
> - bne wait_more @ delay done?
> -wait_lock:
> - ldr r8, [r5] @ get lock val
> - and r8, r8, #3 @ isolate field
> - cmp r8, #2 @ locked?
> - bne wait_lock @ wait if not
> -pend:
> - /* update memory timings & briefly lock dll */
> - ldr r4, omap242x_ssp_sdrc_rfr @ get addr
> - str r1, [r4] @ update refresh timing
> - ldr r11, omap242x_ssp_dlla_ctrl @ get addr of DLLA ctrl
> - ldr r10, [r11] @ get current val
> - mvn r9, #0x4 @ mask to get clear bit2
> - and r10, r10, r9 @ clear bit2 for lock mode
> - orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos)
> - str r10, [r11] @ commit to DLLA_CTRL
> - add r11, r11, #0x8 @ move to dllb
> - str r10, [r11] @ hit DLLB also
> -
> - mov r4, #0x800 @ relock time (min 0x400 L3 clocks)
> -wait_dll_lock:
> - subs r4, r4, #0x1
> - bne wait_dll_lock
> - nop
> - ldmfd sp!, {r0-r12, pc} @ restore regs and return
> -
> -omap242x_ssp_set_config:
> - .word OMAP2420_PRCM_CLKCFG_CTRL
> -omap242x_ssp_pll_ctl:
> - .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN)
> -omap242x_ssp_pll_stat:
> - .word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST)
> -omap242x_ssp_pll_div:
> - .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
> -omap242x_ssp_sdrc_rfr:
> - .word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
> -omap242x_ssp_dlla_ctrl:
> - .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
> -
> -ENTRY(omap242x_sram_set_prcm_sz)
> - .word . - omap242x_sram_set_prcm
> diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
> deleted file mode 100644
> index faf03b7f08f5..000000000000
> --- a/arch/arm/mach-omap2/sram243x.S
> +++ /dev/null
> @@ -1,317 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-or-later */
> -/*
> - * linux/arch/arm/mach-omap2/sram243x.S
> - *
> - * Omap2 specific functions that need to be run in internal SRAM
> - *
> - * (C) Copyright 2004
> - * Texas Instruments, <www.ti.com>
> - * Richard Woodruff <r-woodruff2@ti.com>
> - *
> - * Richard Woodruff notes that any changes to this code must be carefully
> - * audited and tested to ensure that they don't cause a TLB miss while
> - * the SDRAM is inaccessible. Such a situation will crash the system
> - * since it will cause the ARM MMU to attempt to walk the page tables.
> - * These crashes may be intermittent.
> - */
> -#include <linux/linkage.h>
> -
> -#include <asm/assembler.h>
> -
> -#include "soc.h"
> -#include "iomap.h"
> -#include "prm2xxx.h"
> -#include "cm2xxx.h"
> -#include "sdrc.h"
> -
> - .text
> -
> - .align 3
> -ENTRY(omap243x_sram_ddr_init)
> - stmfd sp!, {r0 - r12, lr} @ save registers on stack
> -
> - mov r12, r2 @ capture CS1 vs CS0
> - mov r8, r3 @ capture force parameter
> -
> - /* frequency shift down */
> - ldr r2, omap243x_sdi_cm_clksel2_pll @ get address of dpllout reg
> - mov r3, #0x1 @ value for 1x operation
> - str r3, [r2] @ go to L1-freq operation
> -
> - /* voltage shift down */
> - mov r9, #0x1 @ set up for L1 voltage call
> - bl voltage_shift @ go drop voltage
> -
> - /* dll lock mode */
> - ldr r11, omap243x_sdi_sdrc_dlla_ctrl @ addr of dlla ctrl
> - ldr r10, [r11] @ get current val
> - cmp r12, #0x1 @ cs1 base (2422 es2.05/1)
> - addeq r11, r11, #0x8 @ if cs1 base, move to DLLB
> - mvn r9, #0x4 @ mask to get clear bit2
> - and r10, r10, r9 @ clear bit2 for lock mode.
> - orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos)
> - orr r10, r10, #0x2 @ 90 degree phase for all below 133MHz
> - str r10, [r11] @ commit to DLLA_CTRL
> - bl i_dll_wait @ wait for dll to lock
> -
> - /* get dll value */
> - add r11, r11, #0x4 @ get addr of status reg
> - ldr r10, [r11] @ get locked value
> -
> - /* voltage shift up */
> - mov r9, #0x0 @ shift back to L0-voltage
> - bl voltage_shift @ go raise voltage
> -
> - /* frequency shift up */
> - mov r3, #0x2 @ value for 2x operation
> - str r3, [r2] @ go to L0-freq operation
> -
> - /* reset entry mode for dllctrl */
> - sub r11, r11, #0x4 @ move from status to ctrl
> - cmp r12, #0x1 @ normalize if cs1 based
> - subeq r11, r11, #0x8 @ possibly back to DLLA
> - cmp r8, #0x1 @ if forced unlock exit
> - orreq r1, r1, #0x4 @ make sure exit with unlocked value
> - str r1, [r11] @ restore DLLA_CTRL high value
> - add r11, r11, #0x8 @ move to DLLB_CTRL addr
> - str r1, [r11] @ set value DLLB_CTRL
> - bl i_dll_wait @ wait for possible lock
> -
> - /* set up for return, DDR should be good */
> - str r10, [r0] @ write dll_status and return counter
> - ldmfd sp!, {r0 - r12, pc} @ restore regs and return
> -
> - /* ensure the DLL has relocked */
> -i_dll_wait:
> - mov r4, #0x800 @ delay DLL relock, min 0x400 L3 clocks
> -i_dll_delay:
> - subs r4, r4, #0x1
> - bne i_dll_delay
> - ret lr
> -
> - /*
> - * shift up or down voltage, use R9 as input to tell level.
> - * wait for it to finish, use 32k sync counter, 1tick=31uS.
> - */
> -voltage_shift:
> - ldr r4, omap243x_sdi_prcm_voltctrl @ get addr of volt ctrl.
> - ldr r5, [r4] @ get value.
> - ldr r6, prcm_mask_val @ get value of mask
> - and r5, r5, r6 @ apply mask to clear bits
> - orr r5, r5, r9 @ bulld value for L0/L1-volt operation.
> - str r5, [r4] @ set up for change.
> - mov r3, #0x4000 @ get val for force
> - orr r5, r5, r3 @ build value for force
> - str r5, [r4] @ Force transition to L1
> -
> - ldr r3, omap243x_sdi_timer_32ksynct_cr @ get addr of counter
> - ldr r5, [r3] @ get value
> - add r5, r5, #0x3 @ give it at most 93uS
> -volt_delay:
> - ldr r7, [r3] @ get timer value
> - cmp r5, r7 @ time up?
> - bhi volt_delay @ not yet->branch
> - ret lr @ back to caller.
> -
> -omap243x_sdi_cm_clksel2_pll:
> - .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
> -omap243x_sdi_sdrc_dlla_ctrl:
> - .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
> -omap243x_sdi_prcm_voltctrl:
> - .word OMAP2430_PRCM_VOLTCTRL
> -prcm_mask_val:
> - .word 0xFFFF3FFC
> -omap243x_sdi_timer_32ksynct_cr:
> - .word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
> -ENTRY(omap243x_sram_ddr_init_sz)
> - .word . - omap243x_sram_ddr_init
> -
> -/*
> - * Reprograms memory timings.
> - * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
> - * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
> - */
> - .align 3
> -ENTRY(omap243x_sram_reprogram_sdrc)
> - stmfd sp!, {r0 - r10, lr} @ save registers on stack
> - mov r3, #0x0 @ clear for mrc call
> - mcr p15, 0, r3, c7, c10, 4 @ memory barrier, finish ARM SDR/DDR
> - nop
> - nop
> - ldr r6, omap243x_srs_sdrc_rfr_ctrl @ get addr of refresh reg
> - ldr r5, [r6] @ get value
> - mov r5, r5, lsr #8 @ isolate rfr field and drop burst
> -
> - cmp r0, #0x1 @ going to half speed?
> - movne r9, #0x0 @ if up set flag up for pre up, hi volt
> -
> - blne voltage_shift_c @ adjust voltage
> -
> - cmp r0, #0x1 @ going to half speed (post branch link)
> - moveq r5, r5, lsr #1 @ divide by 2 if to half
> - movne r5, r5, lsl #1 @ mult by 2 if to full
> - mov r5, r5, lsl #8 @ put rfr field back into place
> - add r5, r5, #0x1 @ turn on burst of 1
> - ldr r4, omap243x_srs_cm_clksel2_pll @ get address of out reg
> - ldr r3, [r4] @ get curr value
> - orr r3, r3, #0x3
> - bic r3, r3, #0x3 @ clear lower bits
> - orr r3, r3, r0 @ new state value
> - str r3, [r4] @ set new state (pll/x, x=1 or 2)
> - nop
> - nop
> -
> - moveq r9, #0x1 @ if speed down, post down, drop volt
> - bleq voltage_shift_c
> -
> - mcr p15, 0, r3, c7, c10, 4 @ memory barrier
> - str r5, [r6] @ set new RFR_1 value
> - add r6, r6, #0x30 @ get RFR_2 addr
> - str r5, [r6] @ set RFR_2
> - nop
> - cmp r2, #0x1 @ (SDR or DDR) do we need to adjust DLL
> - bne freq_out @ leave if SDR, no DLL function
> -
> - /* With DDR, we need to take care of the DLL for the frequency change */
> - ldr r2, omap243x_srs_sdrc_dlla_ctrl @ addr of dlla ctrl
> - str r1, [r2] @ write out new SDRC_DLLA_CTRL
> - add r2, r2, #0x8 @ addr to SDRC_DLLB_CTRL
> - str r1, [r2] @ commit to SDRC_DLLB_CTRL
> - mov r1, #0x2000 @ wait DLL relock, min 0x400 L3 clocks
> -dll_wait:
> - subs r1, r1, #0x1
> - bne dll_wait
> -freq_out:
> - ldmfd sp!, {r0 - r10, pc} @ restore regs and return
> -
> - /*
> - * shift up or down voltage, use R9 as input to tell level.
> - * wait for it to finish, use 32k sync counter, 1tick=31uS.
> - */
> -voltage_shift_c:
> - ldr r10, omap243x_srs_prcm_voltctrl @ get addr of volt ctrl
> - ldr r8, [r10] @ get value
> - ldr r7, ddr_prcm_mask_val @ get value of mask
> - and r8, r8, r7 @ apply mask to clear bits
> - orr r8, r8, r9 @ bulld value for L0/L1-volt operation.
> - str r8, [r10] @ set up for change.
> - mov r7, #0x4000 @ get val for force
> - orr r8, r8, r7 @ build value for force
> - str r8, [r10] @ Force transition to L1
> -
> - ldr r10, omap243x_srs_timer_32ksynct @ get addr of counter
> - ldr r8, [r10] @ get value
> - add r8, r8, #0x2 @ give it at most 62uS (min 31+)
> -volt_delay_c:
> - ldr r7, [r10] @ get timer value
> - cmp r8, r7 @ time up?
> - bhi volt_delay_c @ not yet->branch
> - ret lr @ back to caller
> -
> -omap243x_srs_cm_clksel2_pll:
> - .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
> -omap243x_srs_sdrc_dlla_ctrl:
> - .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
> -omap243x_srs_sdrc_rfr_ctrl:
> - .word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
> -omap243x_srs_prcm_voltctrl:
> - .word OMAP2430_PRCM_VOLTCTRL
> -ddr_prcm_mask_val:
> - .word 0xFFFF3FFC
> -omap243x_srs_timer_32ksynct:
> - .word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
> -
> -ENTRY(omap243x_sram_reprogram_sdrc_sz)
> - .word . - omap243x_sram_reprogram_sdrc
> -
> -/*
> - * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
> - */
> - .align 3
> -ENTRY(omap243x_sram_set_prcm)
> - stmfd sp!, {r0-r12, lr} @ regs to stack
> - adr r4, pbegin @ addr of preload start
> - adr r8, pend @ addr of preload end
> - mcrr p15, 1, r8, r4, c12 @ preload into icache
> -pbegin:
> - /* move into fast relock bypass */
> - ldr r8, omap243x_ssp_pll_ctl @ get addr
> - ldr r5, [r8] @ get val
> - mvn r6, #0x3 @ clear mask
> - and r5, r5, r6 @ clear field
> - orr r7, r5, #0x2 @ fast relock val
> - str r7, [r8] @ go to fast relock
> - ldr r4, omap243x_ssp_pll_stat @ addr of stat
> -block:
> - /* wait for bypass */
> - ldr r8, [r4] @ stat value
> - and r8, r8, #0x3 @ mask for stat
> - cmp r8, #0x1 @ there yet
> - bne block @ loop if not
> -
> - /* set new dpll dividers _after_ in bypass */
> - ldr r4, omap243x_ssp_pll_div @ get addr
> - str r0, [r4] @ set dpll ctrl val
> -
> - ldr r4, omap243x_ssp_set_config @ get addr
> - mov r8, #1 @ valid cfg msk
> - str r8, [r4] @ make dividers take
> -
> - mov r4, #100 @ dead spin a bit
> -wait_a_bit:
> - subs r4, r4, #1 @ dec loop
> - bne wait_a_bit @ delay done?
> -
> - /* check if staying in bypass */
> - cmp r2, #0x1 @ stay in bypass?
> - beq pend @ jump over dpll relock
> -
> - /* relock DPLL with new vals */
> - ldr r5, omap243x_ssp_pll_stat @ get addr
> - ldr r4, omap243x_ssp_pll_ctl @ get addr
> - orr r8, r7, #0x3 @ val for lock dpll
> - str r8, [r4] @ set val
> - mov r0, #1000 @ dead spin a bit
> -wait_more:
> - subs r0, r0, #1 @ dec loop
> - bne wait_more @ delay done?
> -wait_lock:
> - ldr r8, [r5] @ get lock val
> - and r8, r8, #3 @ isolate field
> - cmp r8, #2 @ locked?
> - bne wait_lock @ wait if not
> -pend:
> - /* update memory timings & briefly lock dll */
> - ldr r4, omap243x_ssp_sdrc_rfr @ get addr
> - str r1, [r4] @ update refresh timing
> - ldr r11, omap243x_ssp_dlla_ctrl @ get addr of DLLA ctrl
> - ldr r10, [r11] @ get current val
> - mvn r9, #0x4 @ mask to get clear bit2
> - and r10, r10, r9 @ clear bit2 for lock mode
> - orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos)
> - str r10, [r11] @ commit to DLLA_CTRL
> - add r11, r11, #0x8 @ move to dllb
> - str r10, [r11] @ hit DLLB also
> -
> - mov r4, #0x800 @ relock time (min 0x400 L3 clocks)
> -wait_dll_lock:
> - subs r4, r4, #0x1
> - bne wait_dll_lock
> - nop
> - ldmfd sp!, {r0-r12, pc} @ restore regs and return
> -
> -omap243x_ssp_set_config:
> - .word OMAP2430_PRCM_CLKCFG_CTRL
> -omap243x_ssp_pll_ctl:
> - .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN)
> -omap243x_ssp_pll_stat:
> - .word OMAP2430_CM_REGADDR(PLL_MOD, CM_IDLEST)
> -omap243x_ssp_pll_div:
> - .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
> -omap243x_ssp_sdrc_rfr:
> - .word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
> -omap243x_ssp_dlla_ctrl:
> - .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
> -
> -ENTRY(omap243x_sram_set_prcm_sz)
> - .word . - omap243x_sram_set_prcm
> diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
> deleted file mode 100644
> index b46c254c2bc4..000000000000
> --- a/arch/arm/mach-omap2/usb-tusb6010.c
> +++ /dev/null
> @@ -1,217 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * linux/arch/arm/mach-omap2/usb-tusb6010.c
> - *
> - * Copyright (C) 2006 Nokia Corporation
> - */
> -
> -#include <linux/err.h>
> -#include <linux/string.h>
> -#include <linux/types.h>
> -#include <linux/errno.h>
> -#include <linux/delay.h>
> -#include <linux/platform_device.h>
> -#include <linux/export.h>
> -#include <linux/platform_data/usb-omap.h>
> -
> -#include <linux/usb/musb.h>
> -
> -#include "usb-tusb6010.h"
> -#include "gpmc.h"
> -
> -static u8 async_cs, sync_cs;
> -static unsigned refclk_psec;
> -
> -static struct gpmc_settings tusb_async = {
> - .wait_on_read = true,
> - .wait_on_write = true,
> - .device_width = GPMC_DEVWIDTH_16BIT,
> - .mux_add_data = GPMC_MUX_AD,
> -};
> -
> -static struct gpmc_settings tusb_sync = {
> - .burst_read = true,
> - .burst_write = true,
> - .sync_read = true,
> - .sync_write = true,
> - .wait_on_read = true,
> - .wait_on_write = true,
> - .burst_len = GPMC_BURST_16,
> - .device_width = GPMC_DEVWIDTH_16BIT,
> - .mux_add_data = GPMC_MUX_AD,
> -};
> -
> -/* NOTE: timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */
> -
> -static int tusb_set_async_mode(unsigned sysclk_ps)
> -{
> - struct gpmc_device_timings dev_t;
> - struct gpmc_timings t;
> - unsigned t_acsnh_advnh = sysclk_ps + 3000;
> -
> - memset(&dev_t, 0, sizeof(dev_t));
> -
> - dev_t.t_ceasu = 8 * 1000;
> - dev_t.t_avdasu = t_acsnh_advnh - 7000;
> - dev_t.t_ce_avd = 1000;
> - dev_t.t_avdp_r = t_acsnh_advnh;
> - dev_t.t_oeasu = t_acsnh_advnh + 1000;
> - dev_t.t_oe = 300;
> - dev_t.t_cez_r = 7000;
> - dev_t.t_cez_w = dev_t.t_cez_r;
> - dev_t.t_avdp_w = t_acsnh_advnh;
> - dev_t.t_weasu = t_acsnh_advnh + 1000;
> - dev_t.t_wpl = 300;
> - dev_t.cyc_aavdh_we = 1;
> -
> - gpmc_calc_timings(&t, &tusb_async, &dev_t);
> -
> - return gpmc_cs_set_timings(async_cs, &t, &tusb_async);
> -}
> -
> -static int tusb_set_sync_mode(unsigned sysclk_ps)
> -{
> - struct gpmc_device_timings dev_t;
> - struct gpmc_timings t;
> - unsigned t_scsnh_advnh = sysclk_ps + 3000;
> -
> - memset(&dev_t, 0, sizeof(dev_t));
> -
> - dev_t.clk = 11100;
> - dev_t.t_bacc = 1000;
> - dev_t.t_ces = 1000;
> - dev_t.t_ceasu = 8 * 1000;
> - dev_t.t_avdasu = t_scsnh_advnh - 7000;
> - dev_t.t_ce_avd = 1000;
> - dev_t.t_avdp_r = t_scsnh_advnh;
> - dev_t.cyc_aavdh_oe = 3;
> - dev_t.cyc_oe = 5;
> - dev_t.t_ce_rdyz = 7000;
> - dev_t.t_avdp_w = t_scsnh_advnh;
> - dev_t.cyc_aavdh_we = 3;
> - dev_t.cyc_wpl = 6;
> -
> - gpmc_calc_timings(&t, &tusb_sync, &dev_t);
> -
> - return gpmc_cs_set_timings(sync_cs, &t, &tusb_sync);
> -}
> -
> -/* tusb driver calls this when it changes the chip's clocking */
> -static int tusb6010_platform_retime(unsigned is_refclk)
> -{
> - static const char error[] =
> - KERN_ERR "tusb6010 %s retime error %d\n";
> -
> - unsigned sysclk_ps;
> - int status;
> -
> - if (!refclk_psec)
> - return -ENODEV;
> -
> - sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;
> -
> - status = tusb_set_async_mode(sysclk_ps);
> - if (status < 0) {
> - printk(error, "async", status);
> - goto done;
> - }
> - status = tusb_set_sync_mode(sysclk_ps);
> - if (status < 0)
> - printk(error, "sync", status);
> -done:
> - return status;
> -}
> -
> -static struct resource tusb_resources[] = {
> - /* Order is significant! The start/end fields
> - * are updated during setup..
> - */
> - { /* Asynchronous access */
> - .flags = IORESOURCE_MEM,
> - },
> - { /* Synchronous access */
> - .flags = IORESOURCE_MEM,
> - },
> -};
> -
> -static u64 tusb_dmamask = ~(u32)0;
> -
> -static struct platform_device tusb_device = {
> - .name = "musb-tusb",
> - .id = -1,
> - .dev = {
> - .dma_mask = &tusb_dmamask,
> - .coherent_dma_mask = 0xffffffff,
> - },
> - .num_resources = ARRAY_SIZE(tusb_resources),
> - .resource = tusb_resources,
> -};
> -
> -
> -/* this may be called only from board-*.c setup code */
> -int __init tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
> - unsigned int ps_refclk, unsigned int waitpin,
> - unsigned int async, unsigned int sync,
> - unsigned int dmachan)
> -{
> - int status;
> - static char error[] __initdata =
> - KERN_ERR "tusb6010 init error %d, %d\n";
> -
> - /* ASYNC region, primarily for PIO */
> - status = gpmc_cs_request(async, SZ_16M, (unsigned long *)
> - &tusb_resources[0].start);
> - if (status < 0) {
> - printk(error, 1, status);
> - return status;
> - }
> - tusb_resources[0].end = tusb_resources[0].start + 0x9ff;
> - tusb_async.wait_pin = waitpin;
> - async_cs = async;
> -
> - status = gpmc_cs_program_settings(async_cs, &tusb_async);
> - if (status < 0)
> - return status;
> -
> - /* SYNC region, primarily for DMA */
> - status = gpmc_cs_request(sync, SZ_16M, (unsigned long *)
> - &tusb_resources[1].start);
> - if (status < 0) {
> - printk(error, 2, status);
> - return status;
> - }
> - tusb_resources[1].end = tusb_resources[1].start + 0x9ff;
> - tusb_sync.wait_pin = waitpin;
> - sync_cs = sync;
> -
> - status = gpmc_cs_program_settings(sync_cs, &tusb_sync);
> - if (status < 0)
> - return status;
> -
> - /* set up memory timings ... can speed them up later */
> - if (!ps_refclk) {
> - printk(error, 4, status);
> - return -ENODEV;
> - }
> - refclk_psec = ps_refclk;
> - status = tusb6010_platform_retime(1);
> - if (status < 0) {
> - printk(error, 5, status);
> - return status;
> - }
> -
> - /* finish device setup ... */
> - if (!data) {
> - printk(error, 6, status);
> - return -ENODEV;
> - }
> - tusb_device.dev.platform_data = data;
> -
> - /* so far so good ... register the device */
> - status = platform_device_register(&tusb_device);
> - if (status < 0) {
> - printk(error, 7, status);
> - return status;
> - }
> - return 0;
> -}
> diff --git a/arch/arm/mach-omap2/usb-tusb6010.h b/arch/arm/mach-omap2/usb-tusb6010.h
> deleted file mode 100644
> index d210ff6238c2..000000000000
> --- a/arch/arm/mach-omap2/usb-tusb6010.h
> +++ /dev/null
> @@ -1,12 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -
> -#ifndef __USB_TUSB6010_H
> -#define __USB_TUSB6010_H
> -
> -extern int __init tusb6010_setup_interface(
> - struct musb_hdrc_platform_data *data,
> - unsigned int ps_refclk, unsigned int waitpin,
> - unsigned int async_cs, unsigned int sync_cs,
> - unsigned int dmachan);
> -
> -#endif /* __USB_TUSB6010_H */
> diff --git a/arch/arm/mach-omap2/voltagedomains2xxx_data.c b/arch/arm/mach-omap2/voltagedomains2xxx_data.c
> deleted file mode 100644
> index 9bc116fe3ba9..000000000000
> --- a/arch/arm/mach-omap2/voltagedomains2xxx_data.c
> +++ /dev/null
> @@ -1,29 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * OMAP3 voltage domain data
> - *
> - * Copyright (C) 2011 Texas Instruments, Inc.
> - */
> -#include <linux/kernel.h>
> -#include <linux/init.h>
> -
> -#include "voltage.h"
> -
> -static struct voltagedomain omap2_voltdm_core = {
> - .name = "core",
> -};
> -
> -static struct voltagedomain omap2_voltdm_wkup = {
> - .name = "wakeup",
> -};
> -
> -static struct voltagedomain *voltagedomains_omap2[] __initdata = {
> - &omap2_voltdm_core,
> - &omap2_voltdm_wkup,
> - NULL,
> -};
> -
> -void __init omap2xxx_voltagedomains_init(void)
> -{
> - voltdm_init(voltagedomains_omap2);
> -}
> diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
> index 0189dfdcbbe1..a383ff8f446c 100644
> --- a/drivers/crypto/Kconfig
> +++ b/drivers/crypto/Kconfig
> @@ -337,7 +337,7 @@ config CRYPTO_DEV_OMAP_SHAM
>
> config CRYPTO_DEV_OMAP_AES
> tristate "Support for OMAP AES hw engine"
> - depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP2PLUS
> + depends on ARCH_OMAP3 || ARCH_OMAP2PLUS
> select CRYPTO_AES
> select CRYPTO_SKCIPHER
> select CRYPTO_ENGINE
> diff --git a/drivers/media/platform/ti/omap/Kconfig b/drivers/media/platform/ti/omap/Kconfig
> index a9dbe1097775..c41812b324ad 100644
> --- a/drivers/media/platform/ti/omap/Kconfig
> +++ b/drivers/media/platform/ti/omap/Kconfig
> @@ -9,9 +9,9 @@ config VIDEO_OMAP2_VOUT
> depends on V4L_PLATFORM_DRIVERS
> depends on MMU
> depends on FB_OMAP2 || (COMPILE_TEST && FB_OMAP2=n)
> - depends on ARCH_OMAP2 || ARCH_OMAP3 || COMPILE_TEST
> + depends on ARCH_OMAP3 || COMPILE_TEST
> depends on VIDEO_DEV
> select VIDEOBUF2_DMA_CONTIG
> - select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3
> + select OMAP2_VRFB if ARCH_OMAP3
> help
> V4L2 Display driver support for OMAP2/3 based boards.
> diff --git a/drivers/mtd/nand/onenand/Kconfig b/drivers/mtd/nand/onenand/Kconfig
> index 7d57836bf32f..8a362fd5bfc4 100644
> --- a/drivers/mtd/nand/onenand/Kconfig
> +++ b/drivers/mtd/nand/onenand/Kconfig
> @@ -23,8 +23,8 @@ config MTD_ONENAND_GENERIC
> Support for OneNAND flash via platform device driver.
>
> config MTD_ONENAND_OMAP2
> - tristate "OneNAND on OMAP2/OMAP3 support"
> - depends on ARCH_OMAP2 || ARCH_OMAP3 || (COMPILE_TEST && ARM)
> + tristate "OneNAND on OMAP3 support"
> + depends on ARCH_OMAP3 || (COMPILE_TEST && ARM)
> depends on OF
> depends on OMAP_GPMC
> help
> diff --git a/drivers/video/fbdev/omap2/omapfb/Kconfig b/drivers/video/fbdev/omap2/omapfb/Kconfig
> index 2d20e79adefc..d8227f4326bd 100644
> --- a/drivers/video/fbdev/omap2/omapfb/Kconfig
> +++ b/drivers/video/fbdev/omap2/omapfb/Kconfig
> @@ -8,7 +8,7 @@ menuconfig FB_OMAP2
> depends on DRM_OMAP = n
> depends on GPIOLIB
> select FB_OMAP2_DSS
> - select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3
> + select OMAP2_VRFB if ARCH_OMAP3
> select FB_IOMEM_HELPERS
> help
> Frame buffer driver for OMAP2+ based boards.
> diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
> index 54a3fa370004..ca151152da19 100644
> --- a/include/linux/clk/ti.h
> +++ b/include/linux/clk/ti.h
> @@ -265,12 +265,6 @@ int omap2_clk_disable_autoidle_all(void);
> int omap2_clk_enable_autoidle_all(void);
> int omap2_clk_allow_idle(struct clk *clk);
> int omap2_clk_deny_idle(struct clk *clk);
> -unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
> - unsigned long parent_rate);
> -int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate,
> - unsigned long parent_rate);
> -void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
> -void omap2xxx_clkt_vps_init(void);
> unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
>
> void ti_dt_clk_init_retry_clks(void);
> @@ -322,8 +316,6 @@ void omap3_noncore_dpll_restore_context(struct clk_hw *hw);
> int omap3_core_dpll_save_context(struct clk_hw *hw);
> void omap3_core_dpll_restore_context(struct clk_hw *hw);
>
> -extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
> -
> #ifdef CONFIG_ATAGS
> int omap3430_clk_legacy_init(void);
> int omap3430es1_clk_legacy_init(void);
--
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstr. 146, 90461 Nürnberg, Germany, www.suse.com
GF: Jochen Jaser, Andrew McDonald, (HRB 36809, AG Nürnberg)
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 03/13] ARM: remove riscpc
2026-09-08 15:27 ` [PATCH 03/13] ARM: remove riscpc Arnd Bergmann
2026-09-09 8:04 ` Thomas Zimmermann
@ 2026-09-09 16:42 ` Bart Van Assche
2026-09-09 20:09 ` Arnd Bergmann
2026-09-11 3:44 ` Ethan Nelson-Moore
2 siblings, 1 reply; 20+ messages in thread
From: Bart Van Assche @ 2026-09-09 16:42 UTC (permalink / raw)
To: Arnd Bergmann, Krzysztof Kozlowski, Alexandre Belloni,
Linus Walleij, Russell King
Cc: linux-doc, linux-kernel, linux-arm-kernel, devicetree, imx,
linux-stm32, linux-omap, linux-block, linux-serial, linux-fbdev
On 9/8/26 8:27 AM, Arnd Bergmann wrote:
> The Acorn Risc PC is the oldest still support Arm machine in the kernel,
> originally shipped with an ARMv3 ARM610 support in 1994, it later allowed
> faster StrongARM CPUs.
>
> The main limitation here is the CPU bus that does not allow 16-bit
> wide data transfers and hence requires the kernel to be built with the
> -march=armv3 compiler option that was discontinued in gcc-9.
>
> As gcc-8 is barely supported for compiling the kernel, this one
> will not see another LTS kernel release, so remove it now.
If this patch has to be reposted, here is the feedback of my AI coding
assistant (based on an LLM and hence may be wrong):
----------------------------------------------------------------------
Overview
--------
This patch removes the Acorn RiscPC platform (ARCH_RPC), the oldest
32-bit ARM machine supported in mainline Linux (originally ARMv3 ARM610,
later StrongARM SA-110). Because RiscPC hardware requires -march=armv3
(discontinued in GCC 9) due to bus limitations, deprecating and removing
it paves the way to clean out legacy ARMv3 support from the kernel.
Removing RiscPC also represents a major architectural milestone for
arch/arm: with SA-1100 (patch 1), Footbridge (patch 2), and RiscPC
(patch 3) removed, COMMON_CLK, SPARSE_IRQ, and USE_OF (Device Tree)
become unconditionally selected for all 32-bit ARM targets, and legacy
headers mach/io.h and mach/memory.h are eliminated.
Overall, this is a very welcome cleanup, but there are a few missed
references, orphaned symbols, and stale comments that should be addressed.
Issues & Observations
---------------------
1. Missed arch/arm/Makefile cleanup
Patch 03 deletes the entire directory arch/arm/mach-rpc/, but does not
touch arch/arm/Makefile. As a result, two orphaned entries remain:
makefile
machine-$(CONFIG_ARCH_RPC) += rpc
machdirs-$(CONFIG_ARCH_RPC) += arch/arm/mach-rpc
Furthermore, machdirs-$(CONFIG_ARCH_RPC) was the very last user of
machdirs- in arch/arm/Makefile (after Footbridge and SA-1100 are removed
in patches 1 & 2):
makefile
# legacy platforms provide their own mach/*.h headers globally,
# these three are mutually exclusive
machdirs-$(CONFIG_ARCH_FOOTBRIDGE) += arch/arm/mach-footbridge
machdirs-$(CONFIG_ARCH_RPC) += arch/arm/mach-rpc
machdirs-$(CONFIG_ARCH_SA1100) += arch/arm/mach-sa1100
KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%/include,$(machdirs-y))
Once RiscPC is gone, the entire machdirs- inclusion block can and should
be removed from arch/arm/Makefile.
2. Missed ARCH_ACORN reference in lib/fonts/Kconfig
The patch deletes config ARCH_ACORN from arch/arm/Kconfig and removes
#ifdef CONFIG_ARCH_ACORN from
lib/fonts/font_acorn_8x8.c
, but missed
lib/fonts/Kconfig:74
:
kconfig
config FONT_ACORN_8x8
bool "Acorn console 8x8 font" if FONTS
depends on FRAMEBUFFER_CONSOLE || DRM_PANIC
default y if !SPARC && !FONTS && ARM && ARCH_ACORN
Because ARCH_ACORN is removed, this default can never trigger and the
reference should be cleaned up.
3. Orphaned ARCH_RPC reference in arch/arm/mm/Kconfig
In
arch/arm/mm/Kconfig:281-282
:
kconfig
config CPU_SA110
bool
select CPU_32v3 if ARCH_RPC
select CPU_32v4 if !ARCH_RPC
Since ARCH_RPC is removed, select CPU_32v3 if ARCH_RPC references a
non-existent symbol. If CPU_SA110 remains temporarily (before the
architectural cleanup in 7.5), this should be simplified to select CPU_32v4.
4. Dead code in arch/arm/kernel/atags_compat.c
With CONFIG_ARCH_ACORN removed from arch/arm/Kconfig, two blocks in
arch/arm/kernel/atags_compat.c
are now dead code:
Lines 150–157: #ifdef CONFIG_ARCH_ACORN / if (machine_is_riscpc())
memory bank tagging.
Lines 186–194: #ifdef CONFIG_ARCH_ACORN ATAG_ACORN translation.
These blocks should be removed as part of this patch.
5. Stale comments
arch/arm/include/asm/io.h:207-209
:
c
/*
* Now, pick up the machine-defined IO definitions
*/
#if IS_ENABLED(CONFIG_PCMCIA) || defined(CONFIG_PCI)
CONFIG_NEED_MACH_IO_H and #include <mach/io.h> were removed, leaving
this comment describing generic PCI/PCMCIA I/O limits.
arch/arm/boot/bootp/Makefile:21
: # guess an initrd location if possible is left dangling right before
ifdef INITRD_OFFSET after all initrd_offset-$(CONFIG_...) logic has been
stripped out.
6. Floppy driver & arch/arm/include/asm/floppy.h status
The patch removes the ARM MFM AND FLOPPY DRIVERS entry from MAINTAINERS:
diff
-ARM MFM AND FLOPPY DRIVERS
-M: Ian Molton <spyro@f2s.com>
-S: Maintained
-F: arch/arm/include/asm/floppy.h
-F: arch/arm/mach-rpc/floppydma.S
While
floppydma.S
was deleted,
arch/arm/include/asm/floppy.h
was left in the tree.
On ARM, floppy support requires ARCH_MAY_HAVE_PC_FDC, which was selected
only by Footbridge and RiscPC.
With both gone, no ARM board selects ARCH_MAY_HAVE_PC_FDC.
Furthermore, asm/floppy.h references IRQ_FLOPPYDISK and DMA_FLOPPY,
which no longer exist on ARM.
Either
arch/arm/include/asm/floppy.h
and config ARCH_MAY_HAVE_PC_FDC in arch/arm/Kconfig should be deleted
in this patch, or noted if intentionally deferred to the 7.5 driver cleanup.
7. Good changes & verification
block/partitions/Kconfig: Dropping default y if ARCH_ACORN while keeping
ACORN_PARTITION available under PARTITION_ADVANCED is correct; users can
still inspect/mount Acorn media on modern architectures.
drivers/tty/vt/keyboard.c: Clean removal of !defined(CONFIG_ARCH_RPC)
from the raw keyboard scan handler.
Elimination of NEED_MACH_IO_H and NEED_MACH_MEMORY_H: Very clean removal
across arch/arm/Kconfig, arch/arm/include/asm/io.h,
arch/arm/include/asm/memory.h, and arch/arm/mm/mmu.c.
Minor Typo in Commit Message
text
The Acorn Risc PC is the oldest still support Arm machine in the kernel,
originally shipped with an ARMv3 ARM610 support in 1994, it later allowed
faster StrongARM CPUs.
"oldest still support Arm machine" -> "oldest still supported Arm machine"
"with an ARMv3 ARM610 support" -> "with ARMv3 ARM610 support" or "with
an ARMv3 ARM610 CPU"
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 03/13] ARM: remove riscpc
2026-09-09 16:42 ` Bart Van Assche
@ 2026-09-09 20:09 ` Arnd Bergmann
0 siblings, 0 replies; 20+ messages in thread
From: Arnd Bergmann @ 2026-09-09 20:09 UTC (permalink / raw)
To: Bart Van Assche, Krzysztof Kozlowski, Alexandre Belloni,
Linus Walleij, Russell King
Cc: linux-doc, linux-kernel, linux-arm-kernel, devicetree, imx,
linux-stm32, Linux-OMAP, linux-block, linux-serial, linux-fbdev
On Wed, Sep 9, 2026, at 18:42, Bart Van Assche wrote:
> On 9/8/26 8:27 AM, Arnd Bergmann wrote:
>> The Acorn Risc PC is the oldest still support Arm machine in the kernel,
>> originally shipped with an ARMv3 ARM610 support in 1994, it later allowed
>> faster StrongARM CPUs.
>>
>> The main limitation here is the CPU bus that does not allow 16-bit
>> wide data transfers and hence requires the kernel to be built with the
>> -march=armv3 compiler option that was discontinued in gcc-9.
>>
>> As gcc-8 is barely supported for compiling the kernel, this one
>> will not see another LTS kernel release, so remove it now.
>
> If this patch has to be reposted, here is the feedback of my AI coding
> assistant (based on an LLM and hence may be wrong):
Most of this was already discussed, but there are two additional
changes that I made based on it.
> Issues & Observations
> ---------------------
> 1. Missed arch/arm/Makefile cleanup
> Patch 03 deletes the entire directory arch/arm/mach-rpc/, but does not
> touch arch/arm/Makefile. As a result, two orphaned entries remain:
>
> machine-$(CONFIG_ARCH_RPC) += rpc
> machdirs-$(CONFIG_ARCH_RPC) += arch/arm/mach-rpc
> Furthermore, machdirs-$(CONFIG_ARCH_RPC) was the very last user of
> machdirs- in arch/arm/Makefile (after Footbridge and SA-1100 are removed
> in patches 1 & 2):
Fixed already after sashiko-bot found the same thing.
> kconfig
>
>
> config FONT_ACORN_8x8
> bool "Acorn console 8x8 font" if FONTS
> depends on FRAMEBUFFER_CONSOLE || DRM_PANIC
> default y if !SPARC && !FONTS && ARM && ARCH_ACORN
> Because ARCH_ACORN is removed, this default can never trigger and the
> reference should be cleaned up.
I have this in the patch that removes acornfb. It could go into
either one, but I felt it fits better there
> kconfig
>
>
> config CPU_SA110
> bool
> select CPU_32v3 if ARCH_RPC
> select CPU_32v4 if !ARCH_RPC
> Since ARCH_RPC is removed, select CPU_32v3 if ARCH_RPC references a
> non-existent symbol. If CPU_SA110 remains temporarily (before the
> architectural cleanup in 7.5), this should be simplified to select CPU_32v4.
Also explained already that I preferred removing CPU_32v3 along
with CPU_SA110 in a later patch, not together with ARCH_RPC.
> 4. Dead code in arch/arm/kernel/atags_compat.c
> With CONFIG_ARCH_ACORN removed from arch/arm/Kconfig, two blocks in
> arch/arm/kernel/atags_compat.c
> are now dead code:
>
> Lines 150–157: #ifdef CONFIG_ARCH_ACORN / if (machine_is_riscpc())
> memory bank tagging.
> Lines 186–194: #ifdef CONFIG_ARCH_ACORN ATAG_ACORN translation.
> These blocks should be removed as part of this patch.
I have a patch to remove that file.
>
> /*
> * Now, pick up the machine-defined IO definitions
> */
> #if IS_ENABLED(CONFIG_PCMCIA) || defined(CONFIG_PCI)
> CONFIG_NEED_MACH_IO_H and #include <mach/io.h> were removed, leaving
> this comment describing generic PCI/PCMCIA I/O limits.
Fixed now.
> arch/arm/boot/bootp/Makefile:21
> : # guess an initrd location if possible is left dangling right before
> ifdef INITRD_OFFSET after all initrd_offset-$(CONFIG_...) logic has been
> stripped out.
Removed that entire block now:
--- a/arch/arm/boot/bootp/Makefile
+++ b/arch/arm/boot/bootp/Makefile
@@ -17,12 +17,6 @@ add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
# INITRD_PHYS must be in RAM
PARAMS_PHYS := $(call add_hex, $(PHYS_OFFSET), 0x100)
-
-# guess an initrd location if possible
-ifdef INITRD_OFFSET
-INITRD_PHYS := $(call add_hex, $(PHYS_OFFSET), $(INITRD_OFFSET))
-endif
-
endif
PHONY += initrd
@@ -30,7 +24,7 @@ initrd:
@test "$(PARAMS_PHYS)" != "" || \
(echo bootpImage: You must specify PHYS_OFFSET of PARAMS_PHYS ; exit -1)
@test "$(INITRD_PHYS)" != "" || \
- (echo bootpImage: You must specify INITRD_OFFSET or INITRD_PHYS ; exit -1)
+ (echo bootpImage: You must specify INITRD_PHYS ; exit -1)
@test "$(INITRD)" != "" || \
(echo bootpImage: You must specify INITRD; exit -1)
> 6. Floppy driver & arch/arm/include/asm/floppy.h status
> The patch removes the ARM MFM AND FLOPPY DRIVERS entry from MAINTAINERS:
commented already that this is removed along with CONFIG_ISA in a later
patch.
Arnd
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 03/13] ARM: remove riscpc
2026-09-08 15:27 ` [PATCH 03/13] ARM: remove riscpc Arnd Bergmann
2026-09-09 8:04 ` Thomas Zimmermann
2026-09-09 16:42 ` Bart Van Assche
@ 2026-09-11 3:44 ` Ethan Nelson-Moore
2026-09-11 9:07 ` Linus Walleij
2026-09-11 18:42 ` Karl Mehltretter
2 siblings, 2 replies; 20+ messages in thread
From: Ethan Nelson-Moore @ 2026-09-11 3:44 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Krzysztof Kozlowski, Alexandre Belloni, Linus Walleij,
Russell King, Drew Fustini, Arnd Bergmann, Rob Herring,
Conor Dooley, Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi,
Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Vladimir Zapolskiy, Stefan Agner, Maxime Coquelin,
Alexandre Torgue, Aaro Koskinen, Andreas Kemnade, Kevin Hilman,
Roger Quadros, Tony Lindgren, Nicolas Ferre, Claudiu Beznea,
Andrew Lunn, Sebastian Hesselbarth, Gregory Clement,
Robert Jarzmik, Kristoffer Ericson, Geert Uytterhoeven,
Alexander Sverdlin, Shawn Guo, Karl Mehltretter,
David Hildenbrand (Arm), Nicolas Pitre, linux-doc, linux-kernel,
linux-arm-kernel, devicetree, imx, linux-stm32, linux-omap,
Ian Molton, Jens Axboe, Helge Deller, Thomas Zimmermann,
Paul E. McKenney, linux-block, linux-serial, linux-fbdev
Hi, everyone,
On Tue, Sep 8, 2026 at 8:29 AM Arnd Bergmann <arnd@kernel.org> wrote:
> The main limitation here is the CPU bus that does not allow 16-bit
> wide data transfers and hence requires the kernel to be built with the
> -march=armv3 compiler option that was discontinued in gcc-9.
>
> As gcc-8 is barely supported for compiling the kernel, this one
> will not see another LTS kernel release, so remove it now.
Because I think it's cool that the kernel still supports actual Acorn
hardware, I patched gcc 16.2 to restore ARMv3m support:
https://github.com/EthanNelson-Moore/gcc-arm-retro
This ended up being surprisingly straightforward - only a couple
hundred lines changed - and it would be even fewer lines had I not
reverted a commit that adds a use of ldrh instead of fixing it.
It is able to compile a kernel successfully (once you update the GCC
version check to check for -march=armv3m support instead - I can send
my patch). I haven't tested it, but I am fairly confident that it
would run, because the assembler will reject code the compiler
generates with unsupported instructions - this is how I found the
commit I needed to revert.
I am working on a clocksource driver, which uses both timers (to
hopefully fix the awful time drift), and removes the dependency on
LEGACY_TIMER_TICK.
I also have patches for several cleanups to Risc PC-related code.
I am aware that this has no actual use case, but it was fun. No LLM
was used for any part of the work.
Ethan
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 03/13] ARM: remove riscpc
2026-09-11 3:44 ` Ethan Nelson-Moore
@ 2026-09-11 9:07 ` Linus Walleij
2026-09-11 13:25 ` Bart Van Assche
2026-09-11 14:38 ` Daniel Palmer
2026-09-11 18:42 ` Karl Mehltretter
1 sibling, 2 replies; 20+ messages in thread
From: Linus Walleij @ 2026-09-11 9:07 UTC (permalink / raw)
To: Ethan Nelson-Moore, Russell King
Cc: Arnd Bergmann, Krzysztof Kozlowski, Alexandre Belloni,
Drew Fustini, Arnd Bergmann, Rob Herring, Conor Dooley,
Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Vladimir Zapolskiy, Stefan Agner, Maxime Coquelin,
Alexandre Torgue, Aaro Koskinen, Andreas Kemnade, Kevin Hilman,
Roger Quadros, Tony Lindgren, Nicolas Ferre, Claudiu Beznea,
Andrew Lunn, Sebastian Hesselbarth, Gregory Clement,
Robert Jarzmik, Kristoffer Ericson, Geert Uytterhoeven,
Alexander Sverdlin, Shawn Guo, Karl Mehltretter,
David Hildenbrand (Arm), Nicolas Pitre, linux-doc, linux-kernel,
linux-arm-kernel, devicetree, imx, linux-stm32, linux-omap,
Ian Molton, Jens Axboe, Helge Deller, Thomas Zimmermann,
Paul E. McKenney, linux-block, linux-serial, linux-fbdev
On Fri, Sep 11, 2026 at 5:44 AM Ethan Nelson-Moore
<enelsonmoore@gmail.com> wrote:
> Because I think it's cool that the kernel still supports actual Acorn
> hardware, I patched gcc 16.2 to restore ARMv3m support:
> https://github.com/EthanNelson-Moore/gcc-arm-retro
For the record: I also think this is cool.
One question: is ARMv3m there in Clang/LLVM? I only
know that we have ARMv4t.
To the bigger question.
The community has a built in tension around this:
- One camp that are enthusiast like yourself. That kind of people
are running the show inside arch/m68k on Amigas and Ataris.
- One camp who get their paycheck from present day companies
and constantly on top of the latest technology. As can be
seen Qualcomm just taped out a brand new ARMv7 SoC
named Kuno, for example.
As you can see this leads to a bit of tension.
What I'm after here is not one camp is doing the right thing
and the other one is not, because that inevitably boils down
to the question of what is the meaning of life. Or "what is fun"
actually (Torvalds wrote a book named "just for fun") and
either case could be argued to be quite fun, or meaningful.
> I am working on a clocksource driver, which uses both timers (to
> hopefully fix the awful time drift), and removes the dependency on
> LEGACY_TIMER_TICK.
>
> I also have patches for several cleanups to Risc PC-related code.
As SoC maintainers I think we want to hear about a plan to
migrate RiscPC to device tree should it stay supported. And I
do not think it is that hard to achieve with the right focus by the
right people.
Actually testing it on actual hardware would be a further
requirement, so we're not doing dreamscapes here.
I want to heat from Russell on this.
The ARM kernel started as a passionate project by him, on that very
machine, and he should decide if we keep it going.
IIUC the Clang/LLVM compiler has essentially solved the compiler
issue.
> I am aware that this has no actual use case, but it was fun. No LLM
> was used for any part of the work.
My position is that using LLMs is good in many ways because
when used right by the right people it allows us to keep a wider
range of hardware supported.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 03/13] ARM: remove riscpc
2026-09-11 9:07 ` Linus Walleij
@ 2026-09-11 13:25 ` Bart Van Assche
2026-09-11 13:37 ` Linus Walleij
2026-09-11 14:38 ` Daniel Palmer
1 sibling, 1 reply; 20+ messages in thread
From: Bart Van Assche @ 2026-09-11 13:25 UTC (permalink / raw)
To: Linus Walleij, Ethan Nelson-Moore, Russell King
Cc: Arnd Bergmann, Krzysztof Kozlowski, Alexandre Belloni,
Drew Fustini, Arnd Bergmann, Rob Herring, Conor Dooley,
Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Vladimir Zapolskiy, Stefan Agner, Maxime Coquelin,
Alexandre Torgue, Aaro Koskinen, Andreas Kemnade, Kevin Hilman,
Roger Quadros, Tony Lindgren, Nicolas Ferre, Claudiu Beznea,
Andrew Lunn, Sebastian Hesselbarth, Gregory Clement,
Robert Jarzmik, Kristoffer Ericson, Geert Uytterhoeven,
Alexander Sverdlin, Shawn Guo, Karl Mehltretter,
David Hildenbrand (Arm), Nicolas Pitre, linux-doc, linux-kernel,
linux-arm-kernel, devicetree, imx, linux-stm32, linux-omap,
Ian Molton, Jens Axboe, Helge Deller, Thomas Zimmermann,
Paul E. McKenney, linux-block, linux-serial, linux-fbdev
On 9/11/26 2:07 AM, Linus Walleij wrote:
> The community has a built in tension around this:
>
> - One camp that are enthusiast like yourself. That kind of people
> are running the show inside arch/m68k on Amigas and Ataris.
>
> - One camp who get their paycheck from present day companies
> and constantly on top of the latest technology. As can be
> seen Qualcomm just taped out a brand new ARMv7 SoC
> named Kuno, for example.
>
> As you can see this leads to a bit of tension.
That summary looks incomplete to me. Every time a kernel API is modified
that is used by the RiscPC code, the RiscPC code has to be modified too.
Removing the RiscPC code makes modifying kernel APIs easier. A recent
example is available here: "[PATCH v5] scsi: core: Drop
Scsi_Host.default_lock"
(https://lore.kernel.org/linux-scsi/20260831095821.3486994-1-john.g.garry@oracle.com/).
Bart.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 03/13] ARM: remove riscpc
2026-09-11 13:25 ` Bart Van Assche
@ 2026-09-11 13:37 ` Linus Walleij
0 siblings, 0 replies; 20+ messages in thread
From: Linus Walleij @ 2026-09-11 13:37 UTC (permalink / raw)
To: Bart Van Assche
Cc: Ethan Nelson-Moore, Russell King, Arnd Bergmann,
Krzysztof Kozlowski, Alexandre Belloni, Drew Fustini,
Arnd Bergmann, Rob Herring, Conor Dooley, Liviu Dudau,
Sudeep Holla, Lorenzo Pieralisi, Frank Li, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Vladimir Zapolskiy,
Stefan Agner, Maxime Coquelin, Alexandre Torgue, Aaro Koskinen,
Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren,
Nicolas Ferre, Claudiu Beznea, Andrew Lunn, Sebastian Hesselbarth,
Gregory Clement, Robert Jarzmik, Kristoffer Ericson,
Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo,
Karl Mehltretter, David Hildenbrand (Arm), Nicolas Pitre,
linux-doc, linux-kernel, linux-arm-kernel, devicetree, imx,
linux-stm32, linux-omap, Ian Molton, Jens Axboe, Helge Deller,
Thomas Zimmermann, Paul E. McKenney, linux-block, linux-serial,
linux-fbdev
On Fri, Sep 11, 2026 at 3:26 PM Bart Van Assche <bvanassche@acm.org> wrote:
> On 9/11/26 2:07 AM, Linus Walleij wrote:
> > The community has a built in tension around this:
> >
> > - One camp that are enthusiast like yourself. That kind of people
> > are running the show inside arch/m68k on Amigas and Ataris.
> >
> > - One camp who get their paycheck from present day companies
> > and constantly on top of the latest technology. As can be
> > seen Qualcomm just taped out a brand new ARMv7 SoC
> > named Kuno, for example.
> >
> > As you can see this leads to a bit of tension.
>
> That summary looks incomplete to me. Every time a kernel API is modified
> that is used by the RiscPC code, the RiscPC code has to be modified too.
> Removing the RiscPC code makes modifying kernel APIs easier. A recent
> example is available here: "[PATCH v5] scsi: core: Drop
> Scsi_Host.default_lock"
> (https://lore.kernel.org/linux-scsi/20260831095821.3486994-1-john.g.garry@oracle.com/).
Yes that is development churn, but this is the same whether the hardware
supported is old or brand new and doesn't really answer the question
whether it is to be supported or not.
That line of reasoning will always require a supportive hypothesis such as:
- We don't want to support stuff that is old (deprecation and deletionist
stance, I don't want to hear yesterdays news)
- We don't want to support stuff that has very few users (utilitarism,
basically,
the biggest common good for the biggest number of people take
precedence)
This is implicit in many statements people make about this. What entusiasts
ask is a completely different question:
- Is this fun (for me/us), makes me feel good to work on etc.
NB: personally I don't take a clear stance here, I mostly want to break apart
the argument and clarify what it is all about.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 03/13] ARM: remove riscpc
2026-09-11 9:07 ` Linus Walleij
2026-09-11 13:25 ` Bart Van Assche
@ 2026-09-11 14:38 ` Daniel Palmer
2026-09-11 18:14 ` Linus Walleij
1 sibling, 1 reply; 20+ messages in thread
From: Daniel Palmer @ 2026-09-11 14:38 UTC (permalink / raw)
To: Linus Walleij
Cc: Ethan Nelson-Moore, Russell King, Arnd Bergmann,
Krzysztof Kozlowski, Alexandre Belloni, Drew Fustini,
Arnd Bergmann, Rob Herring, Conor Dooley, Liviu Dudau,
Sudeep Holla, Lorenzo Pieralisi, Frank Li, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Vladimir Zapolskiy,
Stefan Agner, Maxime Coquelin, Alexandre Torgue, Aaro Koskinen,
Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren,
Nicolas Ferre, Claudiu Beznea, Andrew Lunn, Sebastian Hesselbarth,
Gregory Clement, Robert Jarzmik, Kristoffer Ericson,
Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo,
Karl Mehltretter, David Hildenbrand (Arm), Nicolas Pitre,
linux-doc, linux-kernel, linux-arm-kernel, devicetree, imx,
linux-stm32, linux-omap, Ian Molton, Jens Axboe, Helge Deller,
Thomas Zimmermann, Paul E. McKenney, linux-block, linux-serial,
linux-fbdev
Hi Linus,
On Fri, 11 Sept 2026 at 18:11, Linus Walleij <linusw@kernel.org> wrote:
> - One camp that are enthusiast like yourself. That kind of people
> are running the show inside arch/m68k on Amigas and Ataris.
I have SMP working on m68k (dual 68040, real hardware) among other
oddities. I think some people would get a kick out of seeing it but
also I think some people would also ask why we can't just delete
everything that isn't arm64/amd64/riscv. I'm putting off sending
patches like that to avoid everything getting deleted. :)
Cheers,
Daniel
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 03/13] ARM: remove riscpc
2026-09-11 14:38 ` Daniel Palmer
@ 2026-09-11 18:14 ` Linus Walleij
2026-09-12 1:29 ` Daniel Palmer
0 siblings, 1 reply; 20+ messages in thread
From: Linus Walleij @ 2026-09-11 18:14 UTC (permalink / raw)
To: daniel
Cc: Ethan Nelson-Moore, Russell King, Arnd Bergmann,
Krzysztof Kozlowski, Alexandre Belloni, Drew Fustini,
Arnd Bergmann, Rob Herring, Conor Dooley, Liviu Dudau,
Sudeep Holla, Lorenzo Pieralisi, Frank Li, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Vladimir Zapolskiy,
Stefan Agner, Maxime Coquelin, Alexandre Torgue, Aaro Koskinen,
Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren,
Nicolas Ferre, Claudiu Beznea, Andrew Lunn, Sebastian Hesselbarth,
Gregory Clement, Robert Jarzmik, Kristoffer Ericson,
Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo,
Karl Mehltretter, David Hildenbrand (Arm), Nicolas Pitre,
linux-doc, linux-kernel, linux-arm-kernel, devicetree, imx,
linux-stm32, linux-omap, Ian Molton, Jens Axboe, Helge Deller,
Thomas Zimmermann, Paul E. McKenney, linux-block, linux-serial,
linux-fbdev
On Fri, Sep 11, 2026 at 4:38 PM Daniel Palmer <daniel@0x0f.com> wrote:
> On Fri, 11 Sept 2026 at 18:11, Linus Walleij <linusw@kernel.org> wrote:
> > - One camp that are enthusiast like yourself. That kind of people
> > are running the show inside arch/m68k on Amigas and Ataris.
>
> I have SMP working on m68k (dual 68040, real hardware) among other
> oddities. I think some people would get a kick out of seeing it but
> also I think some people would also ask why we can't just delete
> everything that isn't arm64/amd64/riscv. I'm putting off sending
> patches like that to avoid everything getting deleted. :)
I have actually thought about SMP on m68k from time to time,
because there is Swedish hardware with enough memory to run
Linux with SMP like that (DIAB SMP m68k Unix computers).
I would say using generic entry would be a prerequisite for
doing m68k SMP so we don't introduce *more* entry
oddities, but after that I'm game.
With generic entry in front I think it should just be merged,
but that is me personally.
As SoC maintainer I see that m68k has a lot of technical debt
like drivers under arch/m68k and no proper hardware description
(such as device tree) nor is it migrated to the actually standard
board file structure (fwnode) which we use when we have no
other description style.
There are things like
amiints.c, cia.c, ataints.c, q40ints.c etc that should be in
drivers/irqchip. So many time.c that should be in
drivers/clocksource/* and many other unmodern things.
Albeit I think actually going and fixing that can't be super-hard
in the age of LLMs. So listing things like this likely will just make
someone go and do it. :D
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 03/13] ARM: remove riscpc
2026-09-11 3:44 ` Ethan Nelson-Moore
2026-09-11 9:07 ` Linus Walleij
@ 2026-09-11 18:42 ` Karl Mehltretter
2026-09-12 2:08 ` Ethan Nelson-Moore
1 sibling, 1 reply; 20+ messages in thread
From: Karl Mehltretter @ 2026-09-11 18:42 UTC (permalink / raw)
To: Ethan Nelson-Moore
Cc: Arnd Bergmann, Krzysztof Kozlowski, Alexandre Belloni,
Linus Walleij, Russell King, Drew Fustini, Arnd Bergmann,
Rob Herring, Conor Dooley, Liviu Dudau, Sudeep Holla,
Lorenzo Pieralisi, Frank Li, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Vladimir Zapolskiy,
Stefan Agner, Maxime Coquelin, Alexandre Torgue, Aaro Koskinen,
Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren,
Nicolas Ferre, Claudiu Beznea, Andrew Lunn, Sebastian Hesselbarth,
Gregory Clement, Robert Jarzmik, Kristoffer Ericson,
Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo,
David Hildenbrand (Arm), Nicolas Pitre, linux-doc, linux-kernel,
linux-arm-kernel, devicetree, imx, linux-stm32, linux-omap,
Ian Molton, Jens Axboe, Helge Deller, Thomas Zimmermann,
Paul E. McKenney, linux-block, linux-serial, linux-fbdev
On Thu, Sep 10, 2026 at 08:44:34PM +0100, Ethan Nelson-Moore wrote:
>
> Because I think it's cool that the kernel still supports actual Acorn
> hardware, I patched gcc 16.2 to restore ARMv3m support:
> https://github.com/EthanNelson-Moore/gcc-arm-retro
>
Nice.
I've made a RiscPC emulator in the browser using QEMU and WASM. It boots
Linux kernels and currently emulates a StrongARM RiscPC:
https://github.com/kmehltretter82/risc_pc_linux_emu
I used LLMs a lot while building it.
Your GCC work looks useful for this. I will look at building the RiscPC
Linux kernel with it, and at emulating the original ARMv3 CPU too.
Thanks,
Karl
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 03/13] ARM: remove riscpc
2026-09-11 18:14 ` Linus Walleij
@ 2026-09-12 1:29 ` Daniel Palmer
0 siblings, 0 replies; 20+ messages in thread
From: Daniel Palmer @ 2026-09-12 1:29 UTC (permalink / raw)
To: Linus Walleij
Cc: Ethan Nelson-Moore, Russell King, Arnd Bergmann,
Krzysztof Kozlowski, Alexandre Belloni, Drew Fustini,
Arnd Bergmann, Rob Herring, Conor Dooley, Liviu Dudau,
Sudeep Holla, Lorenzo Pieralisi, Frank Li, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Vladimir Zapolskiy,
Stefan Agner, Maxime Coquelin, Alexandre Torgue, Aaro Koskinen,
Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren,
Nicolas Ferre, Claudiu Beznea, Andrew Lunn, Sebastian Hesselbarth,
Gregory Clement, Robert Jarzmik, Kristoffer Ericson,
Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo,
Karl Mehltretter, David Hildenbrand (Arm), Nicolas Pitre,
linux-doc, linux-kernel, linux-arm-kernel, devicetree, imx,
linux-stm32, linux-omap, Ian Molton, Jens Axboe, Helge Deller,
Thomas Zimmermann, Paul E. McKenney, linux-block, linux-serial,
linux-fbdev
Hi Linus,
On Sat, 12 Sept 2026 at 03:15, Linus Walleij <linusw@kernel.org> wrote:
> I would say using generic entry would be a prerequisite for
> doing m68k SMP so we don't introduce *more* entry
> oddities, but after that I'm game.
I have started this for one part of the m68k tree (68000), but it's
one of those things that is hard/frustrating to test on real hardware.
For the last few weeks I've had claude create a QEMU that can boot all
of the m68k supported machines to Linux, Netbsd and their original OS.
It already found this:
https://lore.kernel.org/linux-m68k/20260828094940.3882602-1-daniel@0x0f.com/
> As SoC maintainer I see that m68k has a lot of technical debt
> like drivers under arch/m68k and no proper hardware description
> (such as device tree)
I have m68k machines using devicetree... :)
> There are things like
> amiints.c, cia.c, ataints.c, q40ints.c etc that should be in
> drivers/irqchip. So many time.c that should be in
> drivers/clocksource/* and many other unmodern things.
Would be easier with devicetree. But is anyone crazy enough to go
through the pain of merging the devicetree support and then arguing
about devicetree bindings for each of those drivers only to be told
m68k should just be removed?
> Albeit I think actually going and fixing that can't be super-hard
> in the age of LLMs. So listing things like this likely will just make
> someone go and do it. :D
Once you have an emulator that the LLM can operate it can do the
change/build/test/debug cycle all on its own.
With a test harness it can even test the changes work on the real hardware.
But I don't think that's enough to convince people the changes are
worth reviewing/merging.
Cheers,
Daniel
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 03/13] ARM: remove riscpc
2026-09-11 18:42 ` Karl Mehltretter
@ 2026-09-12 2:08 ` Ethan Nelson-Moore
2026-09-12 3:59 ` Ethan Nelson-Moore
0 siblings, 1 reply; 20+ messages in thread
From: Ethan Nelson-Moore @ 2026-09-12 2:08 UTC (permalink / raw)
To: Karl Mehltretter
Cc: Arnd Bergmann, Krzysztof Kozlowski, Alexandre Belloni,
Linus Walleij, Russell King, Drew Fustini, Arnd Bergmann,
Rob Herring, Conor Dooley, Liviu Dudau, Sudeep Holla,
Lorenzo Pieralisi, Frank Li, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Vladimir Zapolskiy,
Stefan Agner, Maxime Coquelin, Alexandre Torgue, Aaro Koskinen,
Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren,
Nicolas Ferre, Claudiu Beznea, Andrew Lunn, Sebastian Hesselbarth,
Gregory Clement, Robert Jarzmik, Kristoffer Ericson,
Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo,
David Hildenbrand (Arm), Nicolas Pitre, linux-doc, linux-kernel,
linux-arm-kernel, devicetree, imx, linux-stm32, linux-omap,
Ian Molton, Jens Axboe, Helge Deller, Thomas Zimmermann,
Paul E. McKenney, linux-block, linux-serial, linux-fbdev
Hi, Karl,
On Fri, Sep 11, 2026 at 11:43 AM Karl Mehltretter
<kmehltretter@gmail.com> wrote:
> I've made a RiscPC emulator in the browser using QEMU and WASM. It boots
> Linux kernels and currently emulates a StrongARM RiscPC:
That's awesome. Are you planning to add support for the NetWinder to the b?
A couple things that I didn't see when I glanced through the code:
* QEMU needs to model the broken ldrh/strh instructions for the Risc
PC (but not the NetWinder). I am not sure exactly what their behavior
is on real hardware (though I have seen forum posts where people
investigated this - I'll let you know when I find them). For now, you
could just have them load/store a random value (:p). It would also be
helpful if it could print a warning when one of these instructions is
executed, to help people detect and remove instances of them in e.g.
JITs.
* On ARMv3, CP15 register c0 is write-only, and you don't model this.
This caused Linux on ARMv3 to be broken for a very long time before
support was eventually removed - it was broken even in 2.4.18-rmk4. A
patch to run Linux on the CL-PS7500FE (= ARM710 Risc PC on a chip,
used in the Acorn A7000+) works around this by keeping a copy of it:
http://webpal.bigbrd.com/patch-2.4.18-rmk4-wp3.gz. According to a
comment in later 2.4 versions, that approach won't work, but I don't
understand why. Also, the patch fails to fix other reads to the
register outside cpu_get_pgd() (I forget which ones).
A few things I know about early ARM hardware and Linux that might help you:
Before 2.6, ARM support in the mainline kernel was very incomplete
and, IIRC, unusable. To build a working kernel, you needed to apply a
patch from http://ftp.armlinux.org.uk/pub/linux/arm/kernel/. There are
no patches for versions newer than 2.4.27, but the 2.4.27 patch mostly
applies correctly to 2.4.37.11 (I didn't try to fully fix it up
though). The last patch that was released was 2.6.0-rmk2 - it has some
relevant changes like the CL-PS7500 PS/2 mouse driver. There is also
an unreleased 2.6.4 patch - I should ask RMK if he still has it.
The NetWinder development team shipped patches to their kernel with
additional features for the NetWinder (and other ARM hardware,
including Acorn). This is the last one:
http://www.netwinder.org/mirror/users/r/ralphs/kernel/patch-2.4.21-rmk1-nw1.gz
I don't think most of those changes ended up in mainline.
The Risc PC and NetWinder lost their audio drivers when OSS was
removed in commit 727dede0ba8afbd8d19116d39f2ae8d19d00033d. RMK was
working on an ALSA driver for the NetWinder but never finished it
(IIRC it is in 2.6.0-rmk2 but probably doesn't work).
> I used LLMs a lot while building it.
I don't use LLMs for environmental reasons, because they are often
inaccurate, and because I like using my own brain and don't want it to
atrophy, but we are all entitled to our own opinion.
> Your GCC work looks useful for this. I will look at building the RiscPC
> Linux kernel with it, and at emulating the original ARMv3 CPU too.
Great. Let me know if it works.
P.S. I have a few UI suggestions for the emulator:
* Make the display bigger and able to lock the mouse/keyboard and go
into fullscreen.
* Remove the LK201 keyboard - the NetWinder used a normal PC keyboard
(if you add it), and the Risc PC used an Acorn PS/2 keyboard (a normal
British PC keyboard but with no Windows key):
https://chrisacorns.computinghistory.org.uk/32bit_UpgradesA2G/Acorn_RiscPC_Keyboard.html.
Just keep virtual keys for the keys that you can't input in a web
browser.
* It should be possible to middle click using a modifier key if the
emulator ever runs Risc OS, because middle clicking is heavily used in
Risc OS.
* I think some of the explanatory text is unnecessary.
* The skeuomorphism is cute but inaccurately represents a Risc PC, and
I think it clutters the UI unnecessarily.
Ethan
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 03/13] ARM: remove riscpc
2026-09-12 2:08 ` Ethan Nelson-Moore
@ 2026-09-12 3:59 ` Ethan Nelson-Moore
0 siblings, 0 replies; 20+ messages in thread
From: Ethan Nelson-Moore @ 2026-09-12 3:59 UTC (permalink / raw)
To: Karl Mehltretter
Cc: Arnd Bergmann, Krzysztof Kozlowski, Alexandre Belloni,
Linus Walleij, Russell King, Drew Fustini, Arnd Bergmann,
Rob Herring, Conor Dooley, Liviu Dudau, Sudeep Holla,
Lorenzo Pieralisi, Frank Li, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Vladimir Zapolskiy,
Stefan Agner, Maxime Coquelin, Alexandre Torgue, Aaro Koskinen,
Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren,
Nicolas Ferre, Claudiu Beznea, Andrew Lunn, Sebastian Hesselbarth,
Gregory Clement, Robert Jarzmik, Kristoffer Ericson,
Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo,
David Hildenbrand (Arm), Nicolas Pitre, linux-doc, linux-kernel,
linux-arm-kernel, devicetree, imx, linux-stm32, linux-omap,
Ian Molton, Jens Axboe, Helge Deller, Thomas Zimmermann,
Paul E. McKenney, linux-block, linux-serial, linux-fbdev
Hi, Karl,
On Fri, Sep 11, 2026 at 7:08 PM Ethan Nelson-Moore
<enelsonmoore@gmail.com> wrote:
> The Risc PC and NetWinder lost their audio drivers when OSS was
> removed in commit 727dede0ba8afbd8d19116d39f2ae8d19d00033d. RMK was
> working on an ALSA driver for the NetWinder but never finished it
> (IIRC it is in 2.6.0-rmk2 but probably doesn't work).
I just remembered someone wrote an ALSA driver that works on the ISA
card version of the WaveArtist, which would probably be easy to get to
work on the NetWinder:
https://lore.kernel.org/all/1440445816-28593-1-git-send-email-linux@rainbow-software.org/
Ethan
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2026-09-12 3:59 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20260908152808.3928630-1-arnd@kernel.org>
2026-09-08 15:27 ` [PATCH 03/13] ARM: remove riscpc Arnd Bergmann
2026-09-09 8:04 ` Thomas Zimmermann
2026-09-09 16:42 ` Bart Van Assche
2026-09-09 20:09 ` Arnd Bergmann
2026-09-11 3:44 ` Ethan Nelson-Moore
2026-09-11 9:07 ` Linus Walleij
2026-09-11 13:25 ` Bart Van Assche
2026-09-11 13:37 ` Linus Walleij
2026-09-11 14:38 ` Daniel Palmer
2026-09-11 18:14 ` Linus Walleij
2026-09-12 1:29 ` Daniel Palmer
2026-09-11 18:42 ` Karl Mehltretter
2026-09-12 2:08 ` Ethan Nelson-Moore
2026-09-12 3:59 ` Ethan Nelson-Moore
2026-09-08 15:27 ` [PATCH 06/13] ARM: omap2: remove omap24xx support Arnd Bergmann
2026-09-08 17:18 ` Aaro Koskinen
2026-09-08 17:35 ` Linus Walleij
2026-09-08 19:21 ` Karl Mehltretter
2026-09-08 19:42 ` Arnd Bergmann
2026-09-09 8:06 ` Thomas Zimmermann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox