Linux GPIO subsystem development
 help / color / mirror / Atom feed
From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
To: linus.walleij@linaro.org, brgl@bgdev.pl, krzk@kernel.org,
	lgirdwood@gmail.com, broonie@kernel.org,
	andriy.shevchenko@intel.com
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-samsung-soc@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: [PATCH V2 2/2] regulator: s5m8767: Convert to GPIO descriptors
Date: Thu, 27 Mar 2025 08:49:45 +0800	[thread overview]
Message-ID: <20250327004945.563765-2-peng.fan@oss.nxp.com> (raw)
In-Reply-To: <20250327004945.563765-1-peng.fan@oss.nxp.com>

From: Peng Fan <peng.fan@nxp.com>

Update the driver to fetch buck_gpio and buck_ds as GPIO descriptors.
Then drop the usage of 'of_gpio.h' which should be deprecated.
Based on commit 84618d5e31cf ("regulator: max8997:
Convert to GPIO descriptors") as a reference to make the changes.

With the quirk fix for s5m8767 in of_gpio_try_fixup_polarity,
the polarity will be active-high, even if exynos5250 spring DTS
wrongly use active-low polarity. So using GPIO descriptors,
it should work as before.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---

V2:
 To address Andy's comments:
  Typo fix
  Format update
  Use !!(temp_index & BIT(x))

  I not have devices to test, just my best practice to work out this patch.

 drivers/regulator/s5m8767.c | 146 ++++++++++--------------------------
 1 file changed, 38 insertions(+), 108 deletions(-)

diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index d25cd81e3f36..fe2631378ccd 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -5,7 +5,7 @@
 
 #include <linux/cleanup.h>
 #include <linux/err.h>
-#include <linux/of_gpio.h>
+#include <linux/of.h>
 #include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
@@ -35,8 +35,8 @@ struct s5m8767_info {
 	u8 buck2_vol[8];
 	u8 buck3_vol[8];
 	u8 buck4_vol[8];
-	int buck_gpios[3];
-	int buck_ds[3];
+	struct gpio_desc *buck_gpios[3];
+	struct gpio_desc *buck_ds[3];
 	int buck_gpioindex;
 };
 
@@ -272,9 +272,9 @@ static inline int s5m8767_set_high(struct s5m8767_info *s5m8767)
 {
 	int temp_index = s5m8767->buck_gpioindex;
 
-	gpio_set_value(s5m8767->buck_gpios[0], (temp_index >> 2) & 0x1);
-	gpio_set_value(s5m8767->buck_gpios[1], (temp_index >> 1) & 0x1);
-	gpio_set_value(s5m8767->buck_gpios[2], temp_index & 0x1);
+	gpiod_set_value(s5m8767->buck_gpios[0], !!(temp_index & BIT(2)));
+	gpiod_set_value(s5m8767->buck_gpios[1], !!(temp_index & BIT(1)));
+	gpiod_set_value(s5m8767->buck_gpios[2], !!(temp_index & BIT(0)));
 
 	return 0;
 }
@@ -283,9 +283,9 @@ static inline int s5m8767_set_low(struct s5m8767_info *s5m8767)
 {
 	int temp_index = s5m8767->buck_gpioindex;
 
-	gpio_set_value(s5m8767->buck_gpios[2], temp_index & 0x1);
-	gpio_set_value(s5m8767->buck_gpios[1], (temp_index >> 1) & 0x1);
-	gpio_set_value(s5m8767->buck_gpios[0], (temp_index >> 2) & 0x1);
+	gpiod_set_value(s5m8767->buck_gpios[2], !!(temp_index & BIT(0)));
+	gpiod_set_value(s5m8767->buck_gpios[1], !!(temp_index & BIT(1)));
+	gpiod_set_value(s5m8767->buck_gpios[0], !!(temp_index & BIT(2)));
 
 	return 0;
 }
@@ -482,42 +482,6 @@ static int s5m8767_enable_ext_control(struct s5m8767_info *s5m8767,
 
 
 #ifdef CONFIG_OF
-static int s5m8767_pmic_dt_parse_dvs_gpio(struct sec_pmic_dev *iodev,
-			struct sec_platform_data *pdata,
-			struct device_node *pmic_np)
-{
-	int i, gpio;
-
-	for (i = 0; i < 3; i++) {
-		gpio = of_get_named_gpio(pmic_np,
-					"s5m8767,pmic-buck-dvs-gpios", i);
-		if (!gpio_is_valid(gpio)) {
-			dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
-			return -EINVAL;
-		}
-		pdata->buck_gpios[i] = gpio;
-	}
-	return 0;
-}
-
-static int s5m8767_pmic_dt_parse_ds_gpio(struct sec_pmic_dev *iodev,
-			struct sec_platform_data *pdata,
-			struct device_node *pmic_np)
-{
-	int i, gpio;
-
-	for (i = 0; i < 3; i++) {
-		gpio = of_get_named_gpio(pmic_np,
-					"s5m8767,pmic-buck-ds-gpios", i);
-		if (!gpio_is_valid(gpio)) {
-			dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
-			return -EINVAL;
-		}
-		pdata->buck_ds[i] = gpio;
-	}
-	return 0;
-}
-
 static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
 					struct sec_platform_data *pdata)
 {
@@ -525,7 +489,7 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
 	struct device_node *pmic_np, *reg_np;
 	struct sec_regulator_data *rdata;
 	struct sec_opmode_data *rmode;
-	unsigned int i, dvs_voltage_nr = 8, ret;
+	unsigned int i, dvs_voltage_nr = 8;
 
 	pmic_np = iodev->dev->of_node;
 	if (!pmic_np) {
@@ -635,10 +599,6 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
 
 	if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
 						pdata->buck4_gpiodvs) {
-		ret = s5m8767_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np);
-		if (ret)
-			return -EINVAL;
-
 		if (of_property_read_u32(pmic_np,
 				"s5m8767,pmic-buck-default-dvs-idx",
 				&pdata->buck_default_idx)) {
@@ -652,10 +612,6 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
 		}
 	}
 
-	ret = s5m8767_pmic_dt_parse_ds_gpio(iodev, pdata, pmic_np);
-	if (ret)
-		return -EINVAL;
-
 	pdata->buck2_ramp_enable = of_property_read_bool(pmic_np, "s5m8767,pmic-buck2-ramp-enable");
 	pdata->buck3_ramp_enable = of_property_read_bool(pmic_np, "s5m8767,pmic-buck3-ramp-enable");
 	pdata->buck4_ramp_enable = of_property_read_bool(pmic_np, "s5m8767,pmic-buck4-ramp-enable");
@@ -684,6 +640,8 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
 	struct regulator_config config = { };
 	struct s5m8767_info *s5m8767;
 	int i, ret, buck_init;
+	const char *gpiods_names[3] = { "S5M8767 DS2", "S5M8767 DS3", "S5M8767 DS4" };
+	const char *gpiodvs_names[3] = { "S5M8767 SET1", "S5M8767 SET2", "S5M8767 SET3" };
 
 	if (!pdata) {
 		dev_err(pdev->dev.parent, "Platform data not supplied\n");
@@ -731,12 +689,6 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
 	s5m8767->buck2_gpiodvs = pdata->buck2_gpiodvs;
 	s5m8767->buck3_gpiodvs = pdata->buck3_gpiodvs;
 	s5m8767->buck4_gpiodvs = pdata->buck4_gpiodvs;
-	s5m8767->buck_gpios[0] = pdata->buck_gpios[0];
-	s5m8767->buck_gpios[1] = pdata->buck_gpios[1];
-	s5m8767->buck_gpios[2] = pdata->buck_gpios[2];
-	s5m8767->buck_ds[0] = pdata->buck_ds[0];
-	s5m8767->buck_ds[1] = pdata->buck_ds[1];
-	s5m8767->buck_ds[2] = pdata->buck_ds[2];
 
 	s5m8767->ramp_delay = pdata->buck_ramp_delay;
 	s5m8767->buck2_ramp = pdata->buck2_ramp_enable;
@@ -787,58 +739,36 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
 
 	if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
 						pdata->buck4_gpiodvs) {
+		for (i = 0; i < 3; i++) {
+			enum gpiod_flags flags;
 
-		if (!gpio_is_valid(pdata->buck_gpios[0]) ||
-			!gpio_is_valid(pdata->buck_gpios[1]) ||
-			!gpio_is_valid(pdata->buck_gpios[2])) {
-			dev_err(&pdev->dev, "GPIO NOT VALID\n");
-			return -EINVAL;
-		}
-
-		ret = devm_gpio_request(&pdev->dev, pdata->buck_gpios[0],
-					"S5M8767 SET1");
-		if (ret)
-			return ret;
-
-		ret = devm_gpio_request(&pdev->dev, pdata->buck_gpios[1],
-					"S5M8767 SET2");
-		if (ret)
-			return ret;
-
-		ret = devm_gpio_request(&pdev->dev, pdata->buck_gpios[2],
-					"S5M8767 SET3");
-		if (ret)
-			return ret;
+			if (s5m8767->buck_gpioindex & BIT(2 - i))
+				flags = GPIOD_OUT_HIGH;
+			else
+				flags = GPIOD_OUT_LOW;
+
+			s5m8767->buck_gpios[i] = devm_gpiod_get_index(iodev->dev,
+								      "s5m8767,pmic-buck-dvs", i,
+								      flags);
+			if (IS_ERR(s5m8767->buck_gpios[i])) {
+				return dev_err_probe(iodev->dev, PTR_ERR(s5m8767->buck_gpios[i]),
+						     "invalid gpio[%d]\n", i);
+			}
 
-		/* SET1 GPIO */
-		gpio_direction_output(pdata->buck_gpios[0],
-				(s5m8767->buck_gpioindex >> 2) & 0x1);
-		/* SET2 GPIO */
-		gpio_direction_output(pdata->buck_gpios[1],
-				(s5m8767->buck_gpioindex >> 1) & 0x1);
-		/* SET3 GPIO */
-		gpio_direction_output(pdata->buck_gpios[2],
-				(s5m8767->buck_gpioindex >> 0) & 0x1);
+			gpiod_set_consumer_name(s5m8767->buck_gpios[i], gpiodvs_names[i]);
+		}
 	}
 
-	ret = devm_gpio_request(&pdev->dev, pdata->buck_ds[0], "S5M8767 DS2");
-	if (ret)
-		return ret;
-
-	ret = devm_gpio_request(&pdev->dev, pdata->buck_ds[1], "S5M8767 DS3");
-	if (ret)
-		return ret;
-
-	ret = devm_gpio_request(&pdev->dev, pdata->buck_ds[2], "S5M8767 DS4");
-	if (ret)
-		return ret;
-
-	/* DS2 GPIO */
-	gpio_direction_output(pdata->buck_ds[0], 0x0);
-	/* DS3 GPIO */
-	gpio_direction_output(pdata->buck_ds[1], 0x0);
-	/* DS4 GPIO */
-	gpio_direction_output(pdata->buck_ds[2], 0x0);
+	for (i = 0; i < 3; i++) {
+		s5m8767->buck_ds[i] = devm_gpiod_get_index(iodev->dev,
+							   "s5m8767,pmic-buck-ds", i,
+							   GPIOD_OUT_LOW);
+		if (IS_ERR(s5m8767->buck_ds[i])) {
+			return dev_err_probe(iodev->dev, PTR_ERR(s5m8767->buck_ds[i]),
+					     "can't get GPIO %d\n", i);
+		}
+		gpiod_set_consumer_name(s5m8767->buck_ds[i], gpiods_names[i]);
+	}
 
 	regmap_update_bits(s5m8767->iodev->regmap_pmic,
 			   S5M8767_REG_BUCK2CTRL, 1 << 1,
-- 
2.37.1


  reply	other threads:[~2025-03-27  0:51 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-27  0:49 [PATCH V2 1/2] gpiolib: of: Add polarity quirk for s5m8767 Peng Fan (OSS)
2025-03-27  0:49 ` Peng Fan (OSS) [this message]
2025-03-27 11:37   ` [PATCH V2 2/2] regulator: s5m8767: Convert to GPIO descriptors Andy Shevchenko
2025-03-27 12:03   ` Mark Brown
2025-03-27 16:54   ` Krzysztof Kozlowski
2025-03-28  7:49   ` Linus Walleij
2025-03-27  8:55 ` [PATCH V2 1/2] gpiolib: of: Add polarity quirk for s5m8767 Bartosz Golaszewski
2025-03-27 12:05   ` Mark Brown
2025-03-27 10:15 ` Andy Shevchenko
2025-03-27 10:25   ` Peng Fan
2025-03-28  7:50 ` Linus Walleij
2025-04-07  7:42 ` (subset) " Bartosz Golaszewski
2025-04-07 22:15 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250327004945.563765-2-peng.fan@oss.nxp.com \
    --to=peng.fan@oss.nxp.com \
    --cc=andriy.shevchenko@intel.com \
    --cc=brgl@bgdev.pl \
    --cc=broonie@kernel.org \
    --cc=krzk@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=peng.fan@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox