public inbox for linux-gpio@vger.kernel.org
 help / color / mirror / Atom feed
* [PATCH v4 0/4] drm/panel: support Waveshare DSI TOUCH kits
@ 2026-04-17 23:16 Dmitry Baryshkov
  2026-04-17 23:16 ` [PATCH v4 1/4] dt-bindings: display/panel: ilitek,ili9881c: describe Waveshare panel Dmitry Baryshkov
                   ` (3 more replies)
  0 siblings, 4 replies; 7+ messages in thread
From: Dmitry Baryshkov @ 2026-04-17 23:16 UTC (permalink / raw)
  To: Neil Armstrong, Jessica Zhang, David Airlie, Simona Vetter,
	Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Cong Yang, Ondrej Jirman,
	Javier Martinez Canillas, Jagan Teki, Liam Girdwood, Mark Brown,
	Linus Walleij, Bartosz Golaszewski, Jie Gan
  Cc: dri-devel, devicetree, linux-kernel, linux-gpio,
	Krzysztof Kozlowski, Conor Dooley, Riccardo Mereu

The Waveshare DSI TOUCH family of DSI panel kits feature different DSI
video-mode panels, bundled with the separate controlling circuit,
produing necessary voltages from the 3.3V and 5V supplies. Extend panel
drivers to support those Waveshare panels and also add GPIO driver for
the onboard control circuitry.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
Changes in v4:
- Dropped patches applied to drm-misc-next
- Link to v3: https://patch.msgid.link/20260413-waveshare-dsi-touch-v3-0-3aeb53022c32@oss.qualcomm.com

Changes in v3:
- Fix another typo in the focaltech,ota7290b schema, sorted out voltage
  supplies in the schema and in the driver
- Dropped Ricardo's T-B from bindings patch (Krzysztof)
- In the Waveshare GPIO driver bumped max register to REG_VERSION (Jie
  Gan)
- Add a lanes vs config check in the JD9365 driver (Jie Gan)
- Link to v2: https://patch.msgid.link/20260411-waveshare-dsi-touch-v2-0-75cdbeac5156@oss.qualcomm.com

Changes in v2:
- Fixed errors in focaltech,ota7290b and waveshare,dsi-touch-gpio schemas
- Split the JD9365 patch, making the changes more obvious (and
  describing panel classes)
- Cleaned up GPIO driver: moved NUM_GPIOS from the enum, switched to
  guard(), added regmap error handling, dropped
waveshare_gpio_i2c_read() (Bartosz)
- Link to v1: https://patch.msgid.link/20260401-waveshare-dsi-touch-v1-0-5e9119b5a014@oss.qualcomm.com

---
Dmitry Baryshkov (4):
      dt-bindings: display/panel: ilitek,ili9881c: describe Waveshare panel
      drm/panel: ilitek-ili9881c: support Waveshare 7.0" DSI panel
      dt-bindings: gpio: describe Waveshare GPIO controller
      gpio: add GPIO controller found on Waveshare DSI TOUCH panels

 .../bindings/display/panel/ilitek,ili9881c.yaml    |   2 +
 .../bindings/gpio/waveshare,dsi-touch-gpio.yaml    | 100 ++++++++
 drivers/gpio/Kconfig                               |  10 +
 drivers/gpio/Makefile                              |   1 +
 drivers/gpio/gpio-waveshare-dsi.c                  | 208 +++++++++++++++++
 drivers/gpu/drm/panel/panel-ilitek-ili9881c.c      | 251 ++++++++++++++++++++-
 6 files changed, 570 insertions(+), 2 deletions(-)
---
base-commit: 17394e05b295e4936e0ed50d2f02ed7f08fd4f7d
change-id: 20260401-waveshare-dsi-touch-e1717a1ffc40

Best regards,
--  
With best wishes
Dmitry


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2026-04-19  0:31 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-04-17 23:16 [PATCH v4 0/4] drm/panel: support Waveshare DSI TOUCH kits Dmitry Baryshkov
2026-04-17 23:16 ` [PATCH v4 1/4] dt-bindings: display/panel: ilitek,ili9881c: describe Waveshare panel Dmitry Baryshkov
2026-04-17 23:16 ` [PATCH v4 2/4] drm/panel: ilitek-ili9881c: support Waveshare 7.0" DSI panel Dmitry Baryshkov
2026-04-17 23:16 ` [PATCH v4 3/4] dt-bindings: gpio: describe Waveshare GPIO controller Dmitry Baryshkov
2026-04-18  0:39   ` Rob Herring (Arm)
2026-04-19  0:31     ` Dmitry Baryshkov
2026-04-17 23:16 ` [PATCH v4 4/4] gpio: add GPIO controller found on Waveshare DSI TOUCH panels Dmitry Baryshkov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox