From: Rosen Penev <rosenp@gmail.com>
To: linux-gpio@vger.kernel.org
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>,
Michael Ellerman <mpe@ellerman.id.au>,
Nicholas Piggin <npiggin@gmail.com>,
"Christophe Leroy (CS GROUP)" <chleroy@kernel.org>,
Linus Walleij <linusw@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>,
linuxppc-dev@lists.ozlabs.org (open list:LINUX FOR POWERPC
(32-BIT AND 64-BIT)), linux-kernel@vger.kernel.org (open list)
Subject: [PATCHv2 1/8] gpio: move ppc4xx gpio driver from arch/powerpc to drivers/gpio
Date: Mon, 3 Aug 2026 15:35:32 -0700 [thread overview]
Message-ID: <20260803223539.86303-2-rosenp@gmail.com> (raw)
In-Reply-To: <20260803223539.86303-1-rosenp@gmail.com>
Move the ppc4xx gpio driver out of arch/powerpc/platforms/44x/ into
drivers/gpio/gpio-ppc44x.c. The driver has no architecture-specific
dependencies and follows the same pattern as other PowerPC GPIO
drivers already in drivers/gpio/ (e.g. gpio-mpc8xxx, gpio-mpc5200).
- Renamed Kconfig symbol from PPC4xx_GPIO to GPIO_PPC44X
- Updated ppc44x_defconfig and warp_defconfig to use the new symbol
- Marked the new option as tristate (was bool) since the driver
supports module build via module_platform_driver()
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
arch/powerpc/configs/44x/warp_defconfig | 2 +-
arch/powerpc/configs/ppc44x_defconfig | 2 +-
arch/powerpc/platforms/44x/Kconfig | 7 -------
arch/powerpc/platforms/44x/Makefile | 2 +-
drivers/gpio/Kconfig | 7 +++++++
drivers/gpio/Makefile | 1 +
.../platforms/44x/gpio.c => drivers/gpio/gpio-ppc44x.c | 0
7 files changed, 11 insertions(+), 10 deletions(-)
rename arch/powerpc/platforms/44x/gpio.c => drivers/gpio/gpio-ppc44x.c (100%)
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 5757625469c4..d6014b9c5708 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -12,7 +12,7 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_EBONY is not set
CONFIG_WARP=y
-CONFIG_PPC4xx_GPIO=y
+CONFIG_GPIO_PPC44X=y
CONFIG_HZ_1000=y
CONFIG_CMDLINE="ip=on"
# CONFIG_PCI is not set
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 0dc537f6aff3..d351551e266f 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -22,7 +22,7 @@ CONFIG_GLACIER=y
CONFIG_REDWOOD=y
CONFIG_EIGER=y
CONFIG_YOSEMITE=y
-CONFIG_PPC4xx_GPIO=y
+CONFIG_GPIO_PPC44X=y
CONFIG_MATH_EMULATION=y
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index fc79f8466933..150813cea945 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -227,13 +227,6 @@ config PPC44x_SIMPLE
help
This option enables the simple PowerPC 44x platform support.
-config PPC4xx_GPIO
- bool "PPC4xx GPIO support"
- depends on 44x
- select GPIOLIB
- help
- Enable gpiolib support for ppc440 based boards
-
# 44x specific CPU modules, selected based on the board above.
config 440EP
bool
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index ca7b1bb442d9..4598d8b89bf4 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -15,4 +15,4 @@ obj-$(CONFIG_FSP2) += fsp2.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_PPC4xx_HSTA_MSI) += hsta_msi.o
obj-$(CONFIG_PPC4xx_CPM) += cpm.o
-obj-$(CONFIG_PPC4xx_GPIO) += gpio.o
+
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index af84285ed1bd..15fd5874f4ea 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -593,6 +593,13 @@ config GPIO_POLARFIRE_SOC
help
Say yes here to support the GPIO controllers on Microchip FPGAs.
+config GPIO_PPC44X
+ tristate "PPC44x GPIO support"
+ depends on 44x
+ select GPIO_GENERIC
+ help
+ Enable gpiolib support for ppc440 based boards.
+
config GPIO_PXA
bool "PXA GPIO support"
depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index fa14581e3995..dc9e6d643b5b 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -147,6 +147,7 @@ obj-$(CONFIG_GPIO_PCIE_IDIO_24) += gpio-pcie-idio-24.o
obj-$(CONFIG_GPIO_PCI_IDIO_16) += gpio-pci-idio-16.o
obj-$(CONFIG_GPIO_PISOSR) += gpio-pisosr.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
+obj-$(CONFIG_GPIO_PPC44X) += gpio-ppc44x.o
obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o
obj-$(CONFIG_GPIO_POLARFIRE_SOC) += gpio-mpfs.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
diff --git a/arch/powerpc/platforms/44x/gpio.c b/drivers/gpio/gpio-ppc44x.c
similarity index 100%
rename from arch/powerpc/platforms/44x/gpio.c
rename to drivers/gpio/gpio-ppc44x.c
--
2.55.0
next prev parent reply other threads:[~2026-08-03 22:35 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-03 22:35 [PATCHv2 0/8] gpio: move ppc4xx driver to drivers/gpio and modernize Rosen Penev
2026-08-03 22:35 ` Rosen Penev [this message]
2026-08-03 22:35 ` [PATCHv2 2/8] gpio: ppc44x: update all 4xx to 44x Rosen Penev
2026-08-03 22:35 ` [PATCHv2 3/8] gpio: ppc44x: Use module platform driver helper for GPIO Rosen Penev
2026-08-03 22:35 ` [PATCHv2 4/8] gpio: ppc44x: Use platform resource helper for GPIO MMIO Rosen Penev
2026-08-03 22:35 ` [PATCHv2 5/8] gpio: ppc44x: Convert GPIO to generic MMIO Rosen Penev
2026-08-03 22:35 ` [PATCHv2 6/8] gpio: ppc44x: drop PPC-specific IO helpers Rosen Penev
2026-08-03 22:35 ` [PATCHv2 7/8] gpio: ppc44x: fix undefined behavior in GPIO_MASK2 macro Rosen Penev
2026-08-03 22:35 ` [PATCHv2 8/8] gpio: ppc44x: use dev_name() for chip label Rosen Penev
2026-08-06 22:15 ` [PATCHv2 0/8] gpio: move ppc4xx driver to drivers/gpio and modernize Linus Walleij
2026-08-07 3:54 ` Madhavan Srinivasan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260803223539.86303-2-rosenp@gmail.com \
--to=rosenp@gmail.com \
--cc=brgl@kernel.org \
--cc=chleroy@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=maddy@linux.ibm.com \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox