Linux GPIO subsystem development
 help / color / mirror / Atom feed
From: Rosen Penev <rosenp@gmail.com>
To: linux-gpio@vger.kernel.org
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>,
	Michael Ellerman <mpe@ellerman.id.au>,
	Nicholas Piggin <npiggin@gmail.com>,
	"Christophe Leroy (CS GROUP)" <chleroy@kernel.org>,
	Linus Walleij <linusw@kernel.org>,
	Bartosz Golaszewski <brgl@kernel.org>,
	linuxppc-dev@lists.ozlabs.org (open list:LINUX FOR POWERPC
	(32-BIT AND 64-BIT)), linux-kernel@vger.kernel.org (open list)
Subject: [PATCHv2 5/8] gpio: ppc44x: Convert GPIO to generic MMIO
Date: Mon,  3 Aug 2026 15:35:36 -0700	[thread overview]
Message-ID: <20260803223539.86303-6-rosenp@gmail.com> (raw)
In-Reply-To: <20260803223539.86303-1-rosenp@gmail.com>

Use gpio_generic_chip_init() to set up the PPC44x GPIO chip
instead of open-coding the basic get, set, locking and state handling.

Keep the PPC44x-specific direction callbacks because they still need to
program ODR and the OSR/TSR registers around the generic data and
direction registers.

Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/gpio/gpio-ppc44x.c | 75 +++++++++++++++-----------------------
 1 file changed, 29 insertions(+), 46 deletions(-)

diff --git a/drivers/gpio/gpio-ppc44x.c b/drivers/gpio/gpio-ppc44x.c
index 5db5217c0225..d9048452162a 100644
--- a/drivers/gpio/gpio-ppc44x.c
+++ b/drivers/gpio/gpio-ppc44x.c
@@ -11,10 +11,9 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <linux/gpio/driver.h>
+#include <linux/gpio/generic.h>
 #include <linux/types.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
@@ -45,9 +44,8 @@ struct ppc44x_gpio {
 };
 
 struct ppc44x_gpio_chip {
-	struct gpio_chip gc;
+	struct gpio_generic_chip chip;
 	void __iomem *regs;
-	spinlock_t lock;
 };
 
 /*
@@ -56,55 +54,34 @@ struct ppc44x_gpio_chip {
  * There are a maximum of 32 gpios in each gpio controller.
  */
 
-static int ppc44x_gpio_get(struct gpio_chip *gc, unsigned int gpio)
-{
-	struct ppc44x_gpio_chip *chip = gpiochip_get_data(gc);
-	struct ppc44x_gpio __iomem *regs = chip->regs;
-
-	return !!(in_be32(&regs->ir) & GPIO_MASK(gpio));
-}
-
 static inline void
 __ppc44x_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
 {
 	struct ppc44x_gpio_chip *chip = gpiochip_get_data(gc);
-	struct ppc44x_gpio __iomem *regs = chip->regs;
+	struct gpio_generic_chip *gen_gc = &chip->chip;
 
 	if (val)
-		setbits32(&regs->or, GPIO_MASK(gpio));
+		gen_gc->sdata |= GPIO_MASK(gpio);
 	else
-		clrbits32(&regs->or, GPIO_MASK(gpio));
-}
-
-static int ppc44x_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
-{
-	struct ppc44x_gpio_chip *chip = gpiochip_get_data(gc);
-	unsigned long flags;
+		gen_gc->sdata &= ~GPIO_MASK(gpio);
 
-	spin_lock_irqsave(&chip->lock, flags);
-
-	__ppc44x_gpio_set(gc, gpio, val);
-
-	spin_unlock_irqrestore(&chip->lock, flags);
-
-	pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
-
-	return 0;
+	gpio_generic_write_reg(gen_gc, gen_gc->reg_set, gen_gc->sdata);
 }
 
 static int ppc44x_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
 {
 	struct ppc44x_gpio_chip *chip = gpiochip_get_data(gc);
+	struct gpio_generic_chip *gen_gc = &chip->chip;
 	struct ppc44x_gpio __iomem *regs = chip->regs;
-	unsigned long flags;
 
-	spin_lock_irqsave(&chip->lock, flags);
+	guard(gpio_generic_lock_irqsave)(gen_gc);
 
 	/* Disable open-drain function */
 	clrbits32(&regs->odr, GPIO_MASK(gpio));
 
 	/* Float the pin */
 	clrbits32(&regs->tcr, GPIO_MASK(gpio));
+	gen_gc->sdir &= ~GPIO_MASK(gpio);
 
 	/* Bits 0-15 use TSRL/OSRL, bits 16-31 use TSRH/OSRH */
 	if (gpio < 16) {
@@ -115,8 +92,6 @@ static int ppc44x_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
 		clrbits32(&regs->tsrh, GPIO_MASK2(gpio));
 	}
 
-	spin_unlock_irqrestore(&chip->lock, flags);
-
 	return 0;
 }
 
@@ -124,10 +99,10 @@ static int
 ppc44x_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 {
 	struct ppc44x_gpio_chip *chip = gpiochip_get_data(gc);
+	struct gpio_generic_chip *gen_gc = &chip->chip;
 	struct ppc44x_gpio __iomem *regs = chip->regs;
-	unsigned long flags;
 
-	spin_lock_irqsave(&chip->lock, flags);
+	guard(gpio_generic_lock_irqsave)(gen_gc);
 
 	/* First set initial value */
 	__ppc44x_gpio_set(gc, gpio, val);
@@ -137,6 +112,7 @@ ppc44x_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 
 	/* Drive the pin */
 	setbits32(&regs->tcr, GPIO_MASK(gpio));
+	gen_gc->sdir |= GPIO_MASK(gpio);
 
 	/* Bits 0-15 use TSRL, bits 16-31 use TSRH */
 	if (gpio < 16) {
@@ -147,8 +123,6 @@ ppc44x_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 		clrbits32(&regs->tsrh, GPIO_MASK2(gpio));
 	}
 
-	spin_unlock_irqrestore(&chip->lock, flags);
-
 	pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
 
 	return 0;
@@ -160,7 +134,9 @@ static int ppc44x_gpio_probe(struct platform_device *ofdev)
 	struct device_node *np = dev->of_node;
 	struct ppc44x_gpio __iomem *regs;
 	struct ppc44x_gpio_chip *chip;
+	struct gpio_generic_chip_config config;
 	struct gpio_chip *gc;
+	int ret;
 
 	regs = devm_platform_ioremap_resource(ofdev, 0);
 	if (IS_ERR(regs))
@@ -172,17 +148,24 @@ static int ppc44x_gpio_probe(struct platform_device *ofdev)
 
 	chip->regs = regs;
 
-	spin_lock_init(&chip->lock);
-
-	gc = &chip->gc;
-
+	config = (struct gpio_generic_chip_config) {
+		.dev = dev,
+		.sz = 4,
+		.dat = &regs->ir,
+		.set = &regs->or,
+		.dirout = &regs->tcr,
+		.flags = GPIO_GENERIC_BIG_ENDIAN |
+			 GPIO_GENERIC_BIG_ENDIAN_BYTE_ORDER,
+	};
+
+	ret = gpio_generic_chip_init(&chip->chip, &config);
+	if (ret)
+		return ret;
+
+	gc = &chip->chip.gc;
 	gc->parent = dev;
-	gc->base = -1;
-	gc->ngpio = 32;
 	gc->direction_input = ppc44x_gpio_dir_in;
 	gc->direction_output = ppc44x_gpio_dir_out;
-	gc->get = ppc44x_gpio_get;
-	gc->set = ppc44x_gpio_set;
 
 	gc->label = devm_kasprintf(dev, GFP_KERNEL, "%pOF", np);
 	if (!gc->label)
-- 
2.55.0


  parent reply	other threads:[~2026-08-03 22:35 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-03 22:35 [PATCHv2 0/8] gpio: move ppc4xx driver to drivers/gpio and modernize Rosen Penev
2026-08-03 22:35 ` [PATCHv2 1/8] gpio: move ppc4xx gpio driver from arch/powerpc to drivers/gpio Rosen Penev
2026-08-03 22:35 ` [PATCHv2 2/8] gpio: ppc44x: update all 4xx to 44x Rosen Penev
2026-08-03 22:35 ` [PATCHv2 3/8] gpio: ppc44x: Use module platform driver helper for GPIO Rosen Penev
2026-08-03 22:35 ` [PATCHv2 4/8] gpio: ppc44x: Use platform resource helper for GPIO MMIO Rosen Penev
2026-08-03 22:35 ` Rosen Penev [this message]
2026-08-03 22:35 ` [PATCHv2 6/8] gpio: ppc44x: drop PPC-specific IO helpers Rosen Penev
2026-08-03 22:35 ` [PATCHv2 7/8] gpio: ppc44x: fix undefined behavior in GPIO_MASK2 macro Rosen Penev
2026-08-03 22:35 ` [PATCHv2 8/8] gpio: ppc44x: use dev_name() for chip label Rosen Penev
2026-08-06 22:15 ` [PATCHv2 0/8] gpio: move ppc4xx driver to drivers/gpio and modernize Linus Walleij
2026-08-07  3:54   ` Madhavan Srinivasan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260803223539.86303-6-rosenp@gmail.com \
    --to=rosenp@gmail.com \
    --cc=brgl@kernel.org \
    --cc=chleroy@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=maddy@linux.ibm.com \
    --cc=mpe@ellerman.id.au \
    --cc=npiggin@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox